DOCSLIB.ORG

Characterization of Colloidal Nanoparticle Aggregates Using Light Scattering Techniques

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Characterization of Colloidal Nanoparticle Aggregates Using Light Scattering Techniques University of Kentucky UKnowledge University of Kentucky Doctoral Dissertations Graduate School 2007 CHARACTERIZATION OF COLLOIDAL NANOPARTICLE AGGREGATES USING LIGHT SCATTERING TECHNIQUES Mehmet Kozan University of Kentucky, [email protected] Right click to open a feedback form in a new tab to let us know how this document benefits ou.y Recommended Citation Kozan, Mehmet, "CHARACTERIZATION OF COLLOIDAL NANOPARTICLE AGGREGATES USING LIGHT SCATTERING TECHNIQUES" (2007). University of Kentucky Doctoral Dissertations. 567. https://uknowledge.uky.edu/gradschool_diss/567 This Dissertation is brought to you for free and open access by the Graduate School at UKnowledge. It has been accepted for inclusion in University of Kentucky Doctoral Dissertations by an authorized administrator of UKnowledge. For more information, please contact [email protected]. ABSTRACT OF DISSERTATION Mehmet Kozan The Graduate School University of Kentucky 2007 CHARACTERIZATION OF COLLOIDAL NANOPARTICLE AGGREGATES USING LIGHT SCATTERING TECHNIQUES _____________________________________ ABSTRACT OF DISSERTATION _____________________________________ A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the College of Engineering at the University of Kentucky By Mehmet Kozan Lexington, Kentucky Director: Dr. M. Pinar Mengüç, Professor of Mechanical Engineering Department Lexington, Kentucky 2007 Copyright © Mehmet Kozan 2007 ABSTRACT OF DISSERTATION CHARACTERIZATION OF COLLOIDAL NANOPARTICLE AGGREGATES USING LIGHT SCATTERING TECHNIQUES Light scattering is a powerful characterization tool for determining shape, size, and size distribution of fine particles, as well as complex, irregular structures of their aggregates. Small angle static light scattering and elliptically polarized light scattering techniques produce accurate results and provide real time, non-intrusive, and in-situ observations on prevailing process conditions in three-dimensional systems. As such, they complement conventional characterization tools such as SEM and TEM which have their known disadvantages and limitations. In this study, we provide a thorough light scattering analysis of colloidal tungsten trioxide (WO3) nanoparticles in the shape of irregular nanospheres and cylindrical nanowires, and of the resulting aggregate morphologies. Aggregation characteristics as a function of primary particle geometry, aspect ratio of nanowires, and the change in dispersion stability in various polar solvents without the use of dispersants are monitored over different time scales and are described using the concepts of fractal theory. Using forward scattered intensities, sedimentation rates as a result of electrolyte addition and particle concentration at low solution pH are quantified, in contrast to widely reported visual observations, and are related to the aggregate structure in the dispersed phase. For nanowires of high aspect ratios, when aggregate structures cannot directly be inferred from measurements, an analytical and a quasi- experimental method are used. KEYWORDS: Aggregation, Fractal Dimension, Small Angle Static Light Scattering, Elliptically Polarized Light Scattering, Sedimentation Rate Mehmet Kozan March 15, 2007 CHARACTERIZATION OF COLLOIDAL NANOPARTICLE AGGREGATES USING LIGHT SCATTERING TECHNIQUES By Mehmet Kozan Dr. M. Pinar Mengüç Director of Dissertation Dr. L. Scott Stephens Director of Graduate Studies November 27, 2007 RULES FOR THE USE OF DISSERTATIONS Unpublished dissertations submitted for the Doctor’s degree and deposited in the University of Kentucky Library are as a rule open for inspection, but are to be used only with due regard to the rights of the authors. Bibliographical references may be noted, but quotations or summaries of parts may be published only with the permission of the author, and with the usual scholarly acknowledgements. Extensive copying or publication of the theses in whole or in part also requires the consent of the Dean of the Graduate School of the University of Kentucky. A library that borrows this dissertation for use by its patrons is expected to secure the signature of each user. Name Date ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ DISSERTATION Mehmet Kozan The Graduate School University of Kentucky 2007 CHARACTERIZATION OF COLLOIDAL NANOPARTICLE AGGREGATES USING LIGHT SCATTERING TECHNIQUES _____________________________________ DISSERTATION _____________________________________ A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the College of Engineering at the University of Kentucky By Mehmet Kozan Lexington, Kentucky Director: Dr. M. Pinar Mengüç, Professor of Mechanical Engineering Department Lexington, Kentucky 2007 Copyright © Mehmet Kozan 2007 To Bilge… ACKNOWLEDGEMENTS I would like to thank my dissertation director Professor M. Pinar Mengüç for the visionary researcher spirit he so enthusiastically shared, the financial support he provided, his patience, and his comments and reviews during the writing of this dissertation. Financial support of the Scientific and Technical Research Counsel of Turkey (TUBITAK) which lasted for two years is also gratefully acknowledged. Thanks also to my dissertation committee including Professor Kaveh A. Tagavi and Professor Dusan P. Sekulic of UK-Mechanical Engineering Department, Professor Czarena Crofcheck of UK-Department of Biosystems and Agricultural Engineering Department, Professor J. Todd Hastings of UK-Electrical Engineering Department, and Professor Mahendra K. Sunkara of University of Louisville Chemical Engineering Department for serving in my committee and their valuable comments. I would like to thank Professor Sunkara also for his rewarding collaboration on characterization of the nanomaterials synthesized in his lab, and Jyothish Thangala and Rahel Bogale of his research team for preparing the nanomaterials and corresponding SEM images. This dissertation, while an individual work, benefited from the experimental setup that was built or improved by former graduate students and post-doctoral fellows of Professor Mengüç. Among them Dr. Mustafa Aslan who re-built the setup and shared his expertise generously is gratefully acknowledged. Thanks also to Dr. Sivakumar Manickavasagam for making his broad expertise on the experimental setup always available and for his technical support. The first compact version of the bench-top prototype I took some part in building, has now passed some critical stage in reaching the market—thanks to the efforts of Dr. Manickavasagam, as well as of Professor Mengüç. The discussions with Dr. Rodolphe Vaillon of INSA, Lyon, his insights and encouragement have been invaluable at various stages of this work. Thanks also for his detailed review of this dissertation. I would also like to express my gratitude to my MS advisor Professor Nevin Selçuk of METU, Ankara, for introducing me to research and for her guidance—even with the distance and the passing of time. The friends and colleagues at the Mechanical Engineering Department including Professor Bora Süzen, Dr. Basil Wong, Dr. Hui Zhao, and Mathieu Francoeur have always been great support. The discussions with Dr. Ing. Regina Hannemann and Dr. Ing. Jens Hannemann of UK-Electrical Engineering Department and their willingness to share their deep understanding of the intricacies of electromagnetic theory, as well as their friendship is also greatly appreciated. My heartfelt gratitude is for the deep love that was always made apparent by my parents Nedret and Ibrahim Kozan, brother Melih, and sister Gül. For her loving nature, farsighted mind, her unwavering love, and for making everything worthwhile, Bilge—my wife, thank you. iii TABLE OF CONTENTS ACKNOWLEDGEMENTS.......................................................................................iii TABLE OF CONTENTS........................................................................................... iv LIST OF TABLES.................................................................................................... vii LIST OF FIGURES .................................................................................................viii NOMENCLATURE ................................................................................................. xii CHAPTER 1 .......................................................................................................................1 PARTICLE CHARACTERIZATION AND NANOTECHNOLOGY — A HISTORICAL PERSPECTIVE 1.1. INTRODUCTION ............................................................................................... 1 1.1.1. Colloid Science and Nanotechnology........................................................... 2 1.1.2. Impact of Nanotechnology
Load more

Recommended publications
  • Pre-Polymerised Inorganic Coagulants and Phosphorus Removal by Coagulation - a Review
    Pre-polymerised inorganic coagulants and phosphorus removal by coagulation - A review Jia-Qian Jiang and Nigel J D Graham Environmental and Water Resource Engineering, Department of Civil Engineering, Imperial College of Science, Technology and Medicine, London SW7 2BU Abstract This paper reviews the use of pre-polymerised inorganic coagulants in water and waste-water treatment, and discusses the removal of phosphorus by chemical precipitation and coagulation. Commonly used inorganic coagulants are aluminium or iron (III) based salts, but a range of hydrolysed Al/Fe species, and not the Al/Fe salt itself, are responsible for the removal of impurities from water. By the development and use of polymeric inorganic coagulants, the coagulation performance can be improved significantly in some cases. Chemical precipitation and coagulation in phosphorus removal are two different processes, with the former related to the compound solubility and the latter depending on the destabilisation-adsorption mechanism. Presently, there is uncertainty concerning the mechanisms and overall performance of phosphorus removal by pre-polymerised metal coagulants. Introduction coagulants in water and waste-water treatment; to assess the present use of chemical precipitation and coagulation as a means Coagulants used for water and waste-water treatment are pre- for phosphorus removal; to evaluate the overall performance of dominantly inorganic salts of iron and aluminium. When dosed pre-polymerised coagulants in comparison with that of conven- into water the iron or aluminium ions hydrolyse rapidly and in an tional coagulants; and to discuss the relevant coagulation mecha- uncontrolled manner, to form a range of metal hydrolysis species. nisms for treating water and waste water.
    [Show full text]
  • The Influence of Inter-Particle Forces on Diffusion at the Nanoscale
    www.nature.com/scientificreports OPEN The infuence of inter-particle forces on difusion at the nanoscale Francesco Giorgi1, Diego Coglitore2, Judith M. Curran1, Douglas Gilliland3, Peter Macko3, Maurice Whelan3, Andrew Worth3 & Eann A. Patterson1 Received: 18 March 2019 Van der Waals and electrostatic interactions are the dominant forces acting at the nanoscale and they Accepted: 12 August 2019 have been reported to directly infuence a range of phenomena including surface adhesion, friction, Published: xx xx xxxx and colloid stability but their contribution on nanoparticle difusion dynamics is still not clear. In this study we evaluated experimentally the changes in the difusion coefcient of nanoparticles as a result of varying the magnitude of Van der Waals and electrostatic forces. We controlled the magnitude of these forces by varying the ionic strength of a salt solution, which has been shown to be a parameter that directly controls the forces, and found by tracking single nanoparticles dispersed in solutions with diferent salt molarity that the difusion of nanoparticles increases with the magnitude of the electrostatic forces and Van der Waals forces. Our results demonstrate that these two concurrently dynamic forces play a pivotal role in driving the difusion process and must be taken into account when considering nanoparticle behaviour. Gold nanoparticles have attracted a growing interest in the scientifc community in recent years, especially for biological and medical applications. However, there is a lack of knowledge about the mechanisms that regulate their difusion through liquid media. It is well-known that two of the main forces acting on charged nanoparticles dispersed in a medium are Van der Waals and electrostatic forces, but their actual contribution to particle difu- sion has not been experimentally investigated.
    [Show full text]
  • Particle Aggregation During a Diatom Bloom. 11. Biological Aspects
    MARINE ECOLOGY PROGRESS SERIES Published January 24 Mar. Ecol. Prog. Ser. Particle aggregation during a diatom bloom. 11. Biological aspects Ulf Riebesell Alfred Wegener Institute for Polar and Marine Research, Colurnbusstr., D-2850 Bremerhaven. Germany ABSTRACT: For a 6 wk period covering the time before, during, and after the phytoplankton spring bloom, macroscopic aggregates (20.5 mm diameter) were repeatedly collected and water column properties simultaneously measured at a fixed station in the Southern North Sea. Distinct changes in aggregate structure and composition were observed during the study. Predominantly detrital aggregates dur~ngthe early phase of the study were followed by diatom-dominated algal flocs around the peak of the bloom. Mucus-rich aggregates containing both algal and detrital components and with large numbers of attached bacteria dominated the post-bloom interval. The phytoplankton succession within the aggregates closely reflected the succession in the water column with a time delay of a few days. Algal flocculation did not occur as a simultaneous aggregation of the entire phytoplankton community, but as a successional aggregat~onof selected diatom species. Although the concentrations of ~norganicnutrients diminished considerably during the development of the phytoplankton bloom, the termination of the bloom appeared to be mostly controlled by physical coagulation processes. The importance of biologically-controlled factors for physical coagulation is discussed. INTRODUCTION stickiness, proposed that physical processes alone could determine the time and extent of algal aggregation. Mass flocculation during diatom blooms as predicted Based on a physical coagulation model, Jackson pre- by Smetacek (1985) has since been documented both in dicted that the rate of aggregation strongly depends on the field (Kranck & Milligan 1988, Alldredge & Got- algal concentration.
    [Show full text]
  • UNIVERSITY of CALIFORNIA Los Angeles Phase Behavior of Particle
    UNIVERSITY OF CALIFORNIA Los Angeles Phase Behavior of Particle-Polyelectrolyte Complexes A thesis submitted in partial satisfaction of the requirements for the degree Master of Science in Chemical Engineering by John E. Neilsen 2019 ABSTRACT OF THE THESIS Phase Behavior of Particle-Polyelectrolyte Complexes by John Neilsen Master of Science in Chemical Engineering University of California, Los Angeles, 2019 Professor Samanvaya Srivastava, Chair The phase behavior of particle-polyelectrolyte complexes was systematically studied using a model system comprising oppositely charged silica nanoparticles and poly(allylamine) hydrochloride (PAH) polycations. Phase behaviors of aqueous mixtures of silica nanoparticles and PAH were elucidated over a wide parameter space of particle and polyelectrolyte concentrations as well as solution pH. Trends in phase behaviors were analyzed to create a fundamental understanding of the fundamental properties that govern the complexation of these oppositely charged species. ii The thesis of John Neilsen is approved. Vasilios Manousiouthakis Junyoung O. Park Samanvaya Srivastava, Committee Chair University of California, Los Angeles 2019 iii Contents 1. Introduction……………………………………………………..………………….…….…..….…..…1 1.1 Aqueous Particle-Polyelectrolyte Self-Assemblies…………..…….....………….....….….1 1.2 Biological Significance …………..……………………..…...….…...…......…….…………..2 1.3 Technological Applications…………..………………….……......……………...………....2 2. Background……………………………………………...………………….……………………..……5 2.1 The Voorn-Overbeek Theory……….………………….…….……………….……….……6
    [Show full text]
  • Aggregation and Clogging Phenomena of Rigid Microparticles in Microfluidics
    Microfluidics and Nanofluidics (2018) 22:104 https://doi.org/10.1007/s10404-018-2124-7 RESEARCH PAPER Aggregation and clogging phenomena of rigid microparticles in microfluidics Comparison of a discrete element method (DEM) and CFD–DEM coupling method Khurram Shahzad1 · Wouter Van Aeken1 · Milad Mottaghi1 · Vahid Kazemi Kamyab1 · Simon Kuhn1 Received: 29 May 2018 / Accepted: 27 August 2018 / Published online: 30 August 2018 © The Author(s) 2018 Abstract We developed a numerical tool to investigate the phenomena of aggregation and clogging of rigid microparticles suspended in a Newtonian fluid transported through a straight microchannel. In a first step, we implement a time-dependent one-way coupling Discrete Element Method (DEM) technique to simulate the movement and effect of adhesion on rigid microparticles in two- and three-dimensional computational domains. The Johnson–Kendall–Roberts (JKR) theory of adhesion is applied to investigate the contact mechanics of particle–particle and particle–wall interactions. Using the one-way coupled solver, the agglomeration, aggregation and deposition behavior of the microparticles is studied by varying the Reynolds number and the particle adhesion. In a second step, we apply a two-way coupling CFD–DEM approach, which solves the equation of motion for each particle, and transfers the force field corresponding to particle–fluid interactions to the CFD toolbox OpenFOAM. Results for the one-way (DEM) and two-way (CFD–DEM) coupling techniques are compared in terms of aggregate size, aggregate percentages, spatial and temporal evaluation of aggregates in 2D and 3D. We conclude that two-way coupling is the more realistic approach, which can accurately capture the particle–fluid dynamics in microfluidic applications.
    [Show full text]
  • Colloidal Particle Aggregation: Mechanism of Assembly Studied Via Constructal Theory Modeling
    Colloidal particle aggregation: mechanism of assembly studied via constructal theory modeling Scott C. Bukosky*, Sukrith Dev, Monica S. Allen and Jeffery W. Allen Full Research Paper Open Access Address: Beilstein J. Nanotechnol. 2021, 12, 413–423. Air Force Research Laboratory, Munitions Directorate, Eglin AFB, FL https://doi.org/10.3762/bjnano.12.33 32542, USA Received: 10 November 2020 Email: Accepted: 29 April 2021 Scott C. Bukosky* - [email protected] Published: 06 May 2021 * Corresponding author Associate Editor: P. Leiderer Keywords: © 2021 Bukosky et al.; licensee Beilstein-Institut. colloids; constructal law; DLVO theory; interparticle interactions; License and terms: see end of document. nanomaterials; self-assembly; tunable systems Abstract The assembly of colloidal particles into ordered structures is of great importance to a variety of nanoscale applications where the precise control and placement of particles is essential. A fundamental understanding of this assembly mechanism is necessary to not only predict, but also to tune the desired properties of a given system. Here, we use constructal theory to develop a theoretical model to explain this mechanism with respect to van der Waals and double layer interactions. Preliminary results show that the par- ticle aggregation behavior depends on the initial lattice configuration and solvent properties. Ultimately, our model provides the first constructal framework for predicting the self-assembly of particles and could be expanded upon to fit a range of colloidal systems. Introduction Constructal theory has been used to describe a number of natu- In concurrence with such constructal analyses, Bejan and rally evolving processes/phenomena that include, but are not Wagstaff showed that the natural coalescence of masses in limited to, turbulent flow, heat and mass transfer, dendritic for- space, with respect to attractive gravitational forces, will lead to mation, and biological growth [1-10].
    [Show full text]
  • Designing Novel Emulsion Performance by Controlled Hetero-Aggregation of Mixed Biopolymer Systems Yingyi Mao University of Massachusetts Amherst, [email protected]
    University of Massachusetts Amherst ScholarWorks@UMass Amherst Open Access Dissertations 9-2013 Designing Novel Emulsion Performance by Controlled Hetero-Aggregation of Mixed Biopolymer Systems Yingyi Mao University of Massachusetts Amherst, [email protected] Follow this and additional works at: https://scholarworks.umass.edu/open_access_dissertations Part of the Food Science Commons Recommended Citation Mao, Yingyi, "Designing Novel Emulsion Performance by Controlled Hetero-Aggregation of Mixed Biopolymer Systems" (2013). Open Access Dissertations. 826. https://doi.org/10.7275/0pym-jj83 https://scholarworks.umass.edu/open_access_dissertations/826 This Open Access Dissertation is brought to you for free and open access by ScholarWorks@UMass Amherst. It has been accepted for inclusion in Open Access Dissertations by an authorized administrator of ScholarWorks@UMass Amherst. For more information, please contact [email protected]. ! ! ! ! ! ! ! ! ! DESIGNING NOVEL EMULSION PERFORMANCE BY CONTROLLED HETERO-AGGREGATION OF MIXED BIOPOLYMER SYSTEMS A Dissertation Presented by YINGYI MAO Submitted to the Graduate School of the University of Massachusetts Amherst in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY September 2013 The Department of Food Science © Copyright by Yingyi Mao 2013 All Rights Reserved DESIGNING NOVEL EMULSION PERFORMANCE BY CONTROLLED HETERO-AGGREGATION OF MIXED BIOPOLYMER SYSTEMS A Dissertation Presented by YINGYI MAO Approved as to style and content by: ________________________________ D. Julian Mcclements, Chair ________________________________ Paul Dubin, Member ________________________________ Hang Xiao, Member _____________________________ Eric A. Decker, Department Head Department of Food Science DEDICATION To my supportive family ACKNOWLEGEMENT First and Foremost, I acknowledge, with gratitude, my debt of thanks to my advisor, Dr. Julian McClements, for his academic guidance and assistant in the past four years.
    [Show full text]
  • Overview of DLVO Theory
    Overview of DLVO Theory Gregor Trefalt and Michal Borkovec Email. [email protected], [email protected] September 29, 2014 Direct link www.colloid.ch/dlvo Derjaguin, Landau, Vervey, and Overbeek (DLVO) developed a theory of colloidal stability, which currently represents the cornerstone of our understanding of interactions between colloidal par- ticles and their aggregation behavior. This theory is also being used to rationalize forces acting between interfaces and to interpret particle deposition to planar substrates. The same theory is also used to rationalize forces between planar substrates, for example, thin liquid films. The principal ideas were first developed by Boris Derjaguin [1], then extended in a landmark article jointly with Lev Landau [2], and later more widely publicized in a book by Evert Verwey and Jan Overbeek [3]. The theory was initially formulated for two identical interfaces (symmetric system), which corresponds to the case of the aggregation of identical particles (homoaggrega- tion). This concept was later extended to the two different interfaces (asymmetric system) and aggregation of different particles (heteroaggregation). In the limiting case of large size disparity between the particles, this process is analogous to deposition of particles to a planar substrate. These processes are illustrated in the figure below. The present essay provides a short summary of the relevant concepts, for more detailed treatment the reader is referred to textbooks [4-6]. Homoaggregation Deposition Heteroaggregation Interaction forces The force F(h) acting between two colloidal particles having a surface separation h can be related to the free energy of two plates W(h) per unit area by means of the Derjaguin approximation [4,5] F(h) Æ 2¼ReffW(h) where the effective radius is given by RÅR¡ Reff Æ RÅ Å R¡ where RÅ and R¡ are the radii of the two particles involved, see figure on the next page.
    [Show full text]
  • Reducing the Magnesium Content from Seawater to Improve Tailing Flocculation: Description by Population Balance Models
    metals Article Reducing the Magnesium Content from Seawater to Improve Tailing Flocculation: Description by Population Balance Models Gonzalo R. Quezada 1 , Matías Jeldres 2,3, Norman Toro 4, Pedro Robles 5 and Ricardo I. Jeldres 3,* 1 Water Research Center for Agriculture and Mining (CRHIAM), Concepción 4030000, Chile; [email protected] 2 Faculty of Engineering and Architecture, Universidad Arturo Prat, Almirante Juan José Latorre 2901, Antofagasta 1244260, Chile; [email protected] 3 Departamento de Ingeniería Química y Procesos de Minerales, Facultad de Ingeniería, Universidad de Antofagasta, Av. Angamos 601, Antofagasta 1240000, Chile 4 Departamento de Ingeniería Metalúrgica y Minas, Universidad Católica del Norte, Antofagasta 1270709, Chile; [email protected] 5 Escuela de Ingeniería Química, Pontificia Universidad Católica de Valparaíso, Valparaíso 2340000, Chile; [email protected] * Correspondence: [email protected]; Tel.: +56-552-637-901 Received: 18 January 2020; Accepted: 24 February 2020; Published: 2 March 2020 Abstract: Experimental assays and mathematical models, through population balance models (PBM), were used to characterize the particle aggregation of mining tailings flocculated in seawater. Three systems were considered for preparation of the slurries: i) Seawater at natural pH (pH 7.4), ii) seawater at pH 11, and iii) treated seawater at pH 11. The treated seawater had a reduced magnesium content in order to avoid the formation of solid complexes, which damage the concentration operations. For this, the pH of seawater was raised with lime before being used in the process—generating solid precipitates of magnesium that were removed by vacuum filtration. The mean size of the aggregates were represented by the mean chord length obtained with the Focused beam reflectance measurement (FBRM) technique, and their descriptions, obtained by the PBM, showed an aggregation and a breakage kernel had evolved.
    [Show full text]
  • Understanding and Controlling Aggregation
    Advances in Colloid and Interface Science 279 (2020) 102162 Contents lists available at ScienceDirect Advances in Colloid and Interface Science journal homepage: www.elsevier.com/locate/cis Historical perspective Nanoparticle processing: Understanding and controlling aggregation Sweta Shrestha a,BoWanga,PrabirDuttab,⁎ a ZeoVation, 1275 Kinnear Road, Columbus, OH 43212, United States of America b Department of Chemistry and Biochemistry, The Ohio State University, Columbus, OH 43210, United States of America article info abstract Article history: Nanoparticles (NPs) are commonly defined as particles with size b100 nm and are currently of considerable tech- 13 April 2020 nological and academic interest, since they are often the starting materials for nanotechnology. Novel properties Available online 16 April 2020 develop as a bulk material is reduced to nanodimensions and is reflected in new chemistry, physics and biology. With reduction in size, a greater function of the atoms is at the surface, and promote different interaction with its Keywords: environment, as compared to the bulk material. In addition, the reduction in size alters the electronic structure of Synthesis fl Stabilization the material, resulting in novel quantum effects. Size also in uences mobility, primarily controlled by Brownian Surface charge motion for NPs, and relevant in biological and environmental processes. However, the small size also leads to high Drying surface energy, and NPs tend to aggregate, thereby lowering the surface energy. In all applications, the uncon- Agglomeration trolled aggregation of NPs can have negative effects and needs to be avoided. There are however examples of con- trolled aggregation of NPs which give rise to novel effects. This review article is focused on the NP features that influences aggregation.
    [Show full text]
  • Particle Coagulation of Emulsion Polymers
    Particle Coagulation of Emulsion Polymers: A Review of Experimental and Modelling Studies Dang Cheng, Solmaz Ariafar, Nida Sheibat-Othman, Jordan Pohn, Timothy Mckenna To cite this version: Dang Cheng, Solmaz Ariafar, Nida Sheibat-Othman, Jordan Pohn, Timothy Mckenna. Particle Coag- ulation of Emulsion Polymers: A Review of Experimental and Modelling Studies. Polymer Reviews, Taylor & Francis, 2018, 58 (4), pp.717-759. 10.1080/15583724.2017.1405979. hal-02992600 HAL Id: hal-02992600 https://hal.archives-ouvertes.fr/hal-02992600 Submitted on 12 Nov 2020 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Particle Coagulation of Emulsion Polymers: A Review of Experimental and Modelling Studies Dang Cheng1, Solmaz Ariafar1, Nida Sheibat-Othman2, Jordan Pohn1, Timothy F.L. McKenna1 1. Université Claude Bernard Lyon 1, CPE Lyon, CNRS, UMR 5265, Laboratoire de Chimie, Catalyse, Polymères et Procédés (C2P2)-LCPP group, Villeurbanne, France 2. Université Claude Bernard Lyon 1, CPE Lyon, CNRS, LAGEP UMR 5007, F-69100, Villeurbanne, France Abstract: Particle coagulation, in conjunction with nucleation and growth, plays a significant role in determining the evolution of particle size distribution in emulsion polymerizations. Therefore, many modelling and experimental studies have been carried out to have a better understanding and control of the particle coagulation phenomenon in order to achieve high-quality as well as highly efficient industrial production.
    [Show full text]
  • Recent Achievements in Polymer Bio-Based Flocculants for Water Treatment
    materials Review Recent Achievements in Polymer Bio-Based Flocculants for Water Treatment Piotr Ma´cczak 1,2, Halina Kaczmarek 1,* and Marta Ziegler-Borowska 1 1 Faculty of Chemistry, Nicolaus Copernicus University in Toru´n,Gagarina 7, 87-100 Toru´n,Poland; [email protected] (P.M.); [email protected] (M.Z.-B.) 2 Water Supply and Sewage Enterprise LLC, Przemysłowa 4, 99-300 Kutno, Poland * Correspondence: [email protected] Received: 22 August 2020; Accepted: 4 September 2020; Published: 7 September 2020 Abstract: Polymer flocculants are used to promote solid–liquid separation processes in potable water and wastewater treatment. Recently, bio-based flocculants have received a lot of attention due to their superior advantages over conventional synthetic polymers or inorganic agents. Among natural polymers, polysaccharides show many benefits such as biodegradability, non-toxicity, ability to undergo different chemical modifications, and wide accessibility from renewable sources. The following article provides an overview of bio-based flocculants and their potential application in water treatment, which may be an indication to look for safer alternatives compared to synthetic polymers. Based on the recent literature, a new approach in searching for biopolymer flocculants sources, flocculation mechanisms, test methods, and factors affecting this process are presented. Particular attention is paid to flocculants based on starch, cellulose, chitosan, and their derivatives because they are low-cost and ecological materials, accepted in industrial practice. New trends in water treatment technology, including biosynthetic polymers, nanobioflocculants, and stimulant-responsive flocculants are also considered. Keywords: bio-based flocculants; biopolymers; polysaccharides; water treatment; flocculation mechanism 1. Introduction Human activity and global industrialization are increasingly affecting the natural environment, which results in the growing pollution of natural water sources.
    [Show full text]