DOCSLIB.ORG

Mxene Course Instructors

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Mxene Course Instructors MXene Course Program nd March 22 , 2021 - Synthesis Instructor Time (EST) Introduction and Opening Remarks Prof. Yury Gogotsi 19:00 - 19:30 Fundamentals of Etching/Delamination Dr. Christopher E. Shuck 19:30 - 20:30 MXene Etching Safety Protocols Adam Goad 20:30 - 21:00 21:00 – 22:00 Break Demonstration of Etching/Delamination (Synthesis of Ti3C2Tx) Dr. Christopher E. Shuck 22:00 - 22:45 Synthesis of Other MXenes Beyond Ti3C2Tx Dr. Armin VahidMohammadi 22:45 - 23:45 rd March 23 , 2021 - Processing Instructor Time (EST) Introduction to Processing of MXene Dispersions and Liquid Crystals Geetha Valurouthu 19:00 - 20:30 Size Selection of MXene​ Dr. Asia Sarycheva 20:30 - 21:00 21:00 – 22:00 Break Storage of MXenes and MXene Dispersions in Organic Solvents Dr. Mikhail Shekhirev 22:00 - 22:30 Fabrication of 2D Transition Metal Carbide (MXene) Transparent Films Kanit Hantanasirisakul 22:30 - 23:30 Next Day Highlights - Introduction to MXene Characterization Prof. Yury Gogotsi 23:30 – Midnight MXene Course Program th March 24 , 2021 Instructor Time (EST) Dynamic Light Scattering (DLS): Size and Zeta Potential​ Dr. Asia Sarycheva 19:00 - 20:00 X-ray Diffraction (XRD) Characterization of MAX Phases and MXene Dr. Christopher E. Shuck 20:00 - 21:00 21:00 – 22:00 Break X-ray Photoelectron Spectroscopy (XPS) of MXenes Mark Anayee 22:00 - 23:00 Raman Spectroscopy of MAX and MXene​ Dr. Asia Sarycheva 23:00 – Midnight th March 25 , 2021 Instructor Time Thermal Analysis of MXenes Mark Anayee 19:00 - 20:00 Electronic and Optical Properties of MXenes Kanit Hantanasirisakul 20:00 - 21:00 21:00 – 22:00 Break Optical and Electron Microscopy (SEM and TEM) of MXenes Dr. Mikhail Shekhirev / Adam Goad 22:00 - 23:00 Atomic Force Microscopy (AFM) of MXenes Dr. Mikhail Shekhirev 23:00 - 23:30 Next Day Highlights - Introduction to Electrochemistry of MXenes Prof. Yury Gogotsi 23:30 – Midnight th March 26 , 2021 Instructor Time Electrochemistry and Energy Storage Applications of MXenes Dr. Armin VahidMohammadi 19:00 - 21:30 21:30 – 22:00 Break Q&A All Instructors 22:00 - 23:45 Closing Remarks Prof. Yury Gogotsi 23:45 - Midnight th March 25 , 2021 Instructor Time Thermal Analysis of MXenes Mark Anayee 19:00 - 20:00 Electronic and Optical Properties of MXenes Kanit Hantanasirisakul 20:00 - 21:00 21:00 – 22:00 Break MXeneOptical Course and Electron Microscopy (SEM and TEM) of MXenes Dr. Mikhail Shekhirev / Adam Goad 22:00 - 23:00 Atomic Force Microscopy (AFM) of MXenes Dr. Mikhail Shekhirev 23:00 - 23:30 ProgramNext Day Highlights - Introduction to Electrochemistry of MXenes Prof. Yury Gogotsi 23:30 – Midnight th March 26 , 2021 Instructor Time Electrochemistry and Energy Storage Applications of MXenes Dr. Armin VahidMohammadi 19:00 - 21:30 21:30 – 22:00 Break Q&A All Instructors 22:00 - 23:45 Closing Remarks Prof. Yury Gogotsi 23:45 - Midnight MXene Course Instructors Professor Yury Gogotsi Introduction and Opening Remarks Distinguished University and Charles T. and Ruth M. Bach Professor Introduction to MXene Syntheesis, Characterization, and Electrochemistry Director, A.J. Drexel Nanomaterials Institute Email: [email protected] Fundamentals of Etching/Delamination Dr. Christopher E. Shuck Postdoctoral Research Associate Demonstration of Etching/Delamination (Synthesis of Ti3C2Tx) A.J. Drexel Nanomaterials Institute Email: [email protected] XRD Characterization of MAX Phases and MXene Adam Goad MXene Etching Safety Protocols Ph.D. Student A.J. Drexel Nanomaterials Institute Transmission Electron Microscopy (TEM) of MXenes Email: [email protected] Dr. Armin VahidMohammadi Synthesis of MXenes Beyond Ti C T Research Assistant Professor 3 2 x A.J. Drexel Nanomaterials Institute Electrochemistry and Energy Storage Email: [email protected] Applications of MXenes MXene Course Instructors Geetha Valurouthu Ph.D. Student Introduction to Processing of MXene Dispersions and Liquid Crystals A.J. Drexel Nanomaterials Institute Email: [email protected] Storage of MXenes and MXene Dispersions in Organic Dr. Mikhail Shekhirev Solvents Research Associate Optical Microscopy & Scanning Electron Microscopy A.J. Drexel Nanomaterials Institute Email: [email protected] Atomic Force Microscopy (AFM) Kanit Hantanasirisakul Fabrication of 2D Transition Metal Carbide (MXene) Ph.D. Candidate Transparent Films A.J. Drexel Nanomaterials Institute Email: [email protected] Electronic and Optical Properties of MXenes Size Selection of MXenes Dr. Asia Sarycheva Ph.D. Raman Spectroscopy of MAX and MXene A.J. Drexel Nanomaterials Institute Email: [email protected] Dynamic Light Scattering (DLS): Size and Zeta Potential MXene Course Instructors Mark Anayee X-ray Photoelectron Spectroscopy of MXenes Ph.D. Student A.J. Drexel Nanomaterials Institute Thermal Analysis of MXenes Email: [email protected].
Load more

Recommended publications
  • Exploring Mxenes and Their MAX Phase Precursors by Electron Microscopy
    Materials Today Advances 9 (2021) 100123 Contents lists available at ScienceDirect Materials Today Advances journal homepage: www.journals.elsevier.com/materials-today-advances/ Exploring MXenes and their MAX phase precursors by electron microscopy H. Alnoor a, A. Elsukova a, J. Palisaitis a, I. Persson a, E.N. Tseng a, J. Lu, L. Hultman, * P.O.Å. Persson Thin Film Physics Division, Department of Physics Chemistry and Biology (IFM), Linkoping€ University, SE-581 83, Linkoping,€ Sweden article info abstract Article history: This review celebrates the width and depth of electron microscopy methods and how these have enabled Received 24 August 2020 massive research efforts on MXenes. MXenes constitute a powerful recent addition to 2-dimensional Received in revised form materials, derived from their parent family of nanolaminated materials known as MAX phases. Owing 2 November 2020 to their rich chemistry, MXenes exhibit properties that have revolutionized ranges of applications, Accepted 23 November 2020 including energy storage, electromagnetic interference shielding, water filtering, sensors, and catalysis. Available online 6 January 2021 Few other methods have been more essential in MXene research and development of corresponding applications, compared with electron microscopy, which enables structural and chemical identification Keywords: Electron microscopy at the atomic scale. In the following, the electron microscopy methods that have been applied to MXene MAX phases and MAX phase precursor research are presented together with research examples and are discussed MXenes with respect to advantages and challenges. 2D materials © 2020 The Author(s). Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
    [Show full text]
  • Capacitance of Two-Dimensional Titanium Carbide (Mxene) and Mxene/Carbon Nanotube Composites in Organic Electrolytes
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by Open Archive Toulouse Archive Ouverte Open Archive TOULOUSE Archive Ouverte ( OATAO ) OATAO is an open access repository that collects the work of Toulouse researchers and makes it freely available over the web where possible. This is an author-deposited version published in : http://oatao.univ-toulouse.fr/ Eprints ID : 16795 To link to this article : DOI : 10.1016/j.jpowsour.2015.12.036 URL : http://dx.doi.org/10.1016/j.jpowsour.2015.12.036 To cite this version : Dall’Agnese, Yohan and Rozier, Patrick and Taberna, Pierre-Louis and Gogotsi, Yury and Simon, Patrice Capacitance of two-dimensional titanium carbide (MXene) and MXene/carbon nanotube composites in organic electrolytes . (2016) Journal of Power Sources, vol. 306. pp. 510-515. ISSN 0378-7753 Any correspondence concerning this service should be sent to the repository administrator: [email protected] Capacitance of two-dimensional titanium carbide (MXene) and MXene/carbon nanotube composites in organic electrolytes Yohan Dall’Agnese a, b, c, Patrick Rozier a, b, Pierre-Louis Taberna a, b, Yury Gogotsi c, Patrice Simon a, b, * a Universite Paul Sabatier, CIRIMAT UMR CNRS 5085, 118 Route de Narbonne, 31062 Toulouse, France b Reseau sur le Stockage Electrochimique de l’Energie (RS2E), FR CNRS 3459, France c Department of Materials Science and Engineering, A. J. Drexel Nanomaterials Institute, Drexel University, Philadelphia, PA 19104, USA h i g h l i g h t s graphical abstract 3 types of Ti3C2 electrodes were prepared: clay, delaminated and CNT composite.
    [Show full text]
  • Intercalation and Delamination of Layered Carbides and Carbonitrides
    ARTICLE Received 19 Dec 2012 | Accepted 26 Feb 2013 | Published 16 Apr 2013 DOI: 10.1038/ncomms2664 Intercalation and delamination of layered carbides and carbonitrides Olha Mashtalir1,2, Michael Naguib1,2, Vadym N. Mochalin1,2, Yohan Dall’Agnese1,2, Min Heon1,2, Michel W. Barsoum1 & Yury Gogotsi1,2 Intercalation and delamination of two-dimensional solids in many cases is a requisite step for exploiting their unique properties. Herein we report on the intercalation of two-dimensional Ti3C2,Ti3CN and TiNbC—so called MXenes. Intercalation of hydrazine, and its co-inter- calation with N,N-dimethylformamide, resulted in increases of the c-lattice parameters of surface functionalized f-Ti3C2, from 19.5 to 25.48 and 26.8 Å, respectively. Urea is also intercalated into f-Ti3C2. Molecular dynamics simulations suggest that a hydrazine monolayer intercalates between f-Ti3C2 layers. Hydrazine is also intercalated into f-Ti3CN and f-TiNbC. When dimethyl sulphoxide is intercalated into f-Ti3C2, followed by sonication in water, the f-Ti3C2 is delaminated forming a stable colloidal solution that is in turn filtered to produce MXene ‘paper’. The latter shows excellent Li-ion capacity at extremely high charging rates. 1 Department of Materials Science and Engineering, Drexel University, 3141 Chestnut Street, Philadelphia, Pennsylvania 19104, USA. 2 A.J. Drexel Nanotechnology Institute, Drexel University, 3141 Chestnut Street, Philadelphia, Pennsylvania 19104, USA. Correspondence and requests for materials should be addressed to Y.G. (email: [email protected]). NATURE COMMUNICATIONS | 4:1716 | DOI: 10.1038/ncomms2664 | www.nature.com/naturecommunications 1 & 2013 Macmillan Publishers Limited. All rights reserved. ARTICLE NATURE COMMUNICATIONS | DOI: 10.1038/ncomms2664 unique characteristic of layered materials is their ability DMF at 80 °C for 24 h, the c-LPs increased to 25.48±0.02 and to accommodate various ions and molecules between 26.8±0.1 Å, respectively.
    [Show full text]
  • Supercapacitors Based on Ti3c2tx Mxene Extracted from Supernatant and Current Collectors Passivated by CVD-Graphene
    www.nature.com/scientificreports OPEN Supercapacitors based on ­Ti3C2Tx MXene extracted from supernatant and current collectors passivated by CVD‑graphene Sunil Kumar1,2, Malik Abdul Rehman1,2, Sungwon Lee1, Minwook Kim1, Hyeryeon Hong1, Jun‑Young Park1 & Yongho Seo1,2* An ultrahigh capacity supercapacitor is fabricated using a nano‑layered MXene as an active electrode material, and Ni‑foil is used as a current collector. The high‑quality Ti3C2Tx obtained from supernatant during etching and washing processes improves the specifc capacitance signifcantly. As another strategy, the surface of Ni‑foil is engineered by coating chemical vapor deposition‑grown graphene. The graphene grown directly on the Ni‑foil is used as a current collector, forming the electrode structure of Ti3C2Tx/graphene/Ni. The surface passivation of the current collectors has a high impact on charge‑transfer, which in turn increases the capacitance of the supercapacitors. It is found that the capacitance of the graphene‑based supercapacitors is more than 1.5 times of the capacitance without graphene. A high specifc capacitance, ~ 542 F/g, is achieved at 5 mV/s scan rate based on cyclic voltammetry analysis. Also, the graphene‑based supercapacitor exhibits a quasi‑rectangular form in cyclic voltammetry curves and a symmetric behavior in charge/discharge curves. Furthermore, cyclic stability up to 5000 cycles is confrmed with high capacitance retention at high scan rate 1000 mV/s. A reduced series resistance with a high limit capacitance is revealed by equivalent circuit analysis with the Nyquist plot. MXene have been studied intensively as emerging inorganic materials with layered structures that have numerous applications, such as energy storage, fuel cells, 3D printing, conductive ink, EMI shielding, and supercapacitor 1–11.
    [Show full text]
  • Realization of 2D Crystalline Metal Nitrides Via Selective Atomic Substitution
    Realization of 2D Crystalline Metal Nitrides via Selective Atomic Substitution Jun Cao1†, Tianshu Li2†, Hongze Gao2, Yuxuan Lin4, Xingzhi Wang1, Haozhe Wang4, Tomás Palacios4, Xi Ling1,2.3* 1. Department of Chemistry, Boston University, 590 Commonwealth Avenue, Boston, MA 02215, USA. 2. Division of Materials Science and Engineering, Boston University, 15 St. Marys Street, Boston, MA 02215, USA. 3. The Photonics Center, Boston University, 8 St. Marys Street, Boston, MA 02215, USA. 4. Department of Electrical Engineering and Computer Science, Massachusetts Institute of Technology, Cambridge, MA 02139, USA. †These authors contributed equally to this work. *Corresponding author. Email: [email protected] (X.L.) Abstract Two-dimensional (2D) transition metal nitrides (TMNs) are new members in the 2D materials family with a wide range of applications. Particularly, highly crystalline and large area thin films of TMNs are potentially promising for applications in electronic and optoelectronic devices; however, the synthesis of such TMNs has not yet been achieved. Here, we report the synthesis of few-nanometer thin Mo5N6 crystals with large area and high quality via in situ chemical conversion of layered MoS2 crystals. The structure and quality of the ultrathin Mo5N6 crystal are confirmed using transmission electron microscopy, Raman spectroscopy and X-ray photoelectron spectroscopy. The large lateral dimensions of Mo5N6 crystals are inherited from the MoS2 crystals that are used for the conversion. Atomic force microscopy characterization reveals the thickness of Mo5N6 crystals is reduced to about 1/3 of the MoS2 crystal. Electrical measurements show the -1 obtained Mo5N6 samples are metallic with high electrical conductivity (~ 100 Ω sq ), which is comparable to graphene.
    [Show full text]
  • View PDF Version
    Nanoscale Advances View Article Online REVIEW View Journal | View Issue Recent progress in two-dimensional materials for terahertz protection Cite this: Nanoscale Adv.,2021,3,1515 Jialiang Pan,ab Haowen Hu,a Zechen Li,a Jingyang Mu,b Yunxiang Caib and Hongwei Zhu *a With the wide applications of terahertz (THz) devices in future communication technology, THz protection materials are essential to overcome potential threats. Recently, THz metamaterials (MMs) based on two- dimensional (2D) materials (e.g., graphene, MXenes) have been extensively investigated due to their unique THz response properties. In this review, THz protection theories are briefly presented first, including reflection loss and shielding mechanisms. Then, the research progress of graphene and other 2D material-based THz MMs and intrinsic materials are reviewed. MMs absorbers in the forms of single layer, multiple layers, hybrid and tunable metasurfaces show excellent THz absorbing performance. These studies provide a sufficient theoretical and practical basis for THz protection, and superior properties promised the wide application prospects of 2D MMs. Three-dimensional intrinsic THz Creative Commons Attribution-NonCommercial 3.0 Unported Licence. absorbing materials based on porous and ordered 2D materials also show exceptional THz protection performance and effectively integrate the advantages of intrinsic properties and the structural characteristics of 2D materials. These special structures can optimize the surface impedance matching Received 15th December 2020 and enable multiple THz scatterings and electric transmission loss, which can realize high-efficiency Accepted 28th January 2021 absorption loss and active controllable protection performance in ultra-wide THz wavebands. Finally, the DOI: 10.1039/d0na01046d advantages and existing problems of current THz protection materials are summarized, and their rsc.li/nanoscale-advances possible future development and applications are prospected.
    [Show full text]
  • Mxenes for Plasmonic and Metamaterial Devices
    FM2G.7.pdf CLEO 2018 © OSA 2018 MXenes for Plasmonic and Metamaterial Devices Zhuoxian Wang,1 Krishnakali Chaudhuri,1 Mohamed Alhabeb,2 Xiangeng Meng,1 Shaimaa I Azzam,1 Alexander Kildishev,1 Young L. Kim,3 Vladimir M. Shalaev,1 Yury Gogotsi, 2 and Alexandra Boltasseva1 1School of Electrical and Computer Engineering, and Birck Nanotechnology Center, Purdue University, West Lafayette, IN 47907, USA 2Department of Materials Science and Engineering, and A. J. Drexel Nanomaterials Institute, Drexel University, Philadelphia, PA 19104, USA 3Weldon School of Biomedical Engineering, Purdue University, West Lafayette, IN 47907, USA Author e-mail address: [email protected] Abstract We explore the applications of MXenes, a new material class of growing interest, in the area of nanophotonics and plasmonics. A broadband plasmonic metamaterial absorber and a random laser device have thus been demonstrated. OCIS codes: (160.3918) Metamaterials; (250.5403) Plasmonics; (140.3460) Lasers 1. Introduction MXenes are a new family of two-dimensional (2D) nanomaterials formed of transition metal carbides and carbon nitrides that shows high metallic conductivity, surface hydrophilicity and excellent mechanical properties [1-2]. They are derived from layered ternary carbides and nitrides known as MAX (Mn+1AXn) phases by selective chemical etching of the ‘A’ layers and addition of surface functional groups ‘T’ (=O, -OH or -F), making the final composition of Mn+1XnTx [3]. MXenes have been explored in a variety of applications [3]; however, investigations of MXenes in the context of nanophotonics and plasmonics have been limited [4-5]. This motivates the current study of MXenes as building blocks for plasmonic and metamaterial devices.
    [Show full text]
  • Current Trends in Mxene-Based Nanomaterials for Energy Storage and Conversion System: a Mini Review
    catalysts Review Current Trends in MXene-Based Nanomaterials for Energy Storage and Conversion System: A Mini Review Karthik Kannan 1, Kishor Kumar Sadasivuni 1,*, Aboubakr M. Abdullah 1 and Bijandra Kumar 2,* 1 Center for Advanced Materials, Qatar University, P.O. Box 2713, Doha, Qatar; [email protected] (K.K.); [email protected] (A.M.A.) 2 Department of Technology, Elizabeth City State University, Elizabeth City, NC 27909, USA * Correspondence: [email protected] (K.K.S.); [email protected] (B.K.) Received: 9 March 2020; Accepted: 14 April 2020; Published: 1 May 2020 Abstract: MXene is deemed to be one of the best attentive materials in an extensive range of applications due to its stupendous optical, electronic, thermal, and mechanical properties. Several MXene-based nanomaterials with extraordinary characteristics have been proposed, prepared, and practiced as a catalyst due to its two-dimensional (2D) structure, large specific surface area, facile decoration, and high adsorption capacity. This review summarizes the synthesis and characterization studies, and the appropriate applications in the catalysis field, exclusively in the energy storage systems. Ultimately, we also discussed the encounters and prospects for the future growth of MXene-based nanomaterials as an efficient candidate in developing efficient energy storage systems. This review delivers crucial knowledge within the scientific community intending to design efficient energy storage systems. Keywords: MXene; 2D materials; Li-ion batteries; supercapacitors; Proton reduction; CO2 conversion and oxygen reduction 1. Introduction Two-dimensional layered materials have substantial research due to their amazing structural [1–3], mechanical [4], electronic [5,6], and optical properties [7].
    [Show full text]
  • Mxenes) As Ultralow Work Function Materials
    OH terminated two-dimensional transition metal carbides and nitrides (MXenes) as ultralow work function materials Mohammad Khazaei1*, Masao Arai1, Taizo Sasaki1, Ahmad Ranjbar2, Yunye Liang3, and Seiji Yunoki2,4,5 1Computational Materials Science Unit, National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba 305-0044, Ibaraki, Japan 2Computational Materials Science Research Team, RIKEN Advanced Institute for Computational Science (AICS), Kobe, Hyogo 650-0047, Japan 3New Industry Creation Hatchery Center, Tohoku University, Sendai 980-8579, Japan 4Computational Condensed Matter Physics Laboratory, RIKEN, Wako, Saitama 351-0198, Japan 5Computational Quantum Matter Research Team, RIKEN Center for Emergent Matter Science (CEMS), Wako, Saitama 351-0198, Japan *Corresponding author. E-mail address: [email protected] Abstract: MXenes are a set of two-dimensional transition metal carbides and nitrides that offer many potential applications in energy storage and electronic devices. As an important parameter to design new electronic devices, we investigate the work functions of bare MXenes and their functionalized ones with F, OH, and O chemical groups using first-principles calculations. From our calculations, it turns out that the OH terminated MXenes attain ultralow work functions between 1.6 and 2.8 eV. Moreover, depending on the type of the transition metal, the F or O functionalization affects increasing or decreasing the work functions. We show that the changes in the work functions upon functionalizations are linearly correlated with the changes in the surface dipole moments. It is shown that the work functions of the F or O terminated MXenes are controlled by two factors: the induced dipole moments by the charge transfers between F/O and the substrate, and the changes in the total surface dipole moments caused by surface relaxation upon the functionalization.
    [Show full text]
  • Tuning the Magnetic Properties of Two-Dimensional Mxenes by Chemical Etching
    materials Article Tuning the Magnetic Properties of Two-Dimensional MXenes by Chemical Etching Kemryn Allen-Perry 1, Weston Straka 2, Danielle Keith 1, Shubo Han 1 , Lewis Reynolds 2, Bhoj Gautam 1 and Daniel E. Autrey 1,* 1 Department of Chemistry, Physics and Materials Science, Fayetteville State University, Fayetteville, NC 28301, USA; [email protected] (K.A.-P.); [email protected] (D.K.); [email protected] (S.H.); [email protected] (B.G.) 2 Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695, USA; [email protected] (W.S.); [email protected] (L.R.) * Correspondence: [email protected] Abstract: Two-dimensional materials based on transition metal carbides have been intensively stud- ied due to their unique properties including metallic conductivity, hydrophilicity and structural diversity and have shown a great potential in several applications, for example, energy storage, sensing and optoelectronics. While MXenes based on magnetic transition elements show interesting magnetic properties, not much is known about the magnetic properties of titanium-based MXenes. Here, we measured the magnetic properties of Ti3C2Tx MXenes synthesized by different chemical etching conditions such as etching temperature and time. Our magnetic measurements were per- formed in a superconducting quantum interference device (SQUID) vibrating sample. These data suggest that there is a paramagnetic-antiferromagnetic (PM-AFM) phase transition and the transition temperature depends on the synthesis procedure of MXenes. Our observation indicates that the magnetic properties of these MXenes can be tuned by the extent of chemical etching, which can be beneficial for the design of MXenes-based spintronic devices.
    [Show full text]
  • 4882A0e1735256735bb836077
    nanomaterials Article Fabrication of Flexible, Lightweight, Magnetic Mushroom Gills and Coral-Like MXene–Carbon Nanotube Nanocomposites for EMI Shielding Application Kanthasamy Raagulan 1 , Ramanaskanda Braveenth 1 , Lee Ro Lee 1, Joonsik Lee 2, Bo Mi Kim 3, Jai Jung Moon 4, Sang Bok Lee 2,* and Kyu Yun Chai 1,* 1 Division of Bio-Nanochemistry, College of Natural Sciences, Wonkwang University, Iksan City 570-749, Korea; [email protected] (K.R.); [email protected] (R.B.); fjrtufl[email protected] (L.R.L.) 2 Composite Research Division, Korea Institute of Materials Science, Changwon 51508, Korea; [email protected] 3 Department of Chemical Engineering, Wonkwang University, Iksan 570-749, Korea; [email protected] 4 Clean & Science Co., Ltd., Jeongeup 3 Industrial Complex 15BL, 67, 3sandan 3-gil, Buk-myeon 56136, Jeongeup-si 580-810, Korea; [email protected] * Correspondence: [email protected] (S.B.L.); [email protected] (K.Y.C.); Tel.: +82-55-280-3318 (S.B.L.); +82-63-850-6230 (K.Y.C.); Fax: +82-55-280-3498 (S.B.L.); +82-63-841-4893 (K.Y.C.) Received: 20 February 2019; Accepted: 26 March 2019; Published: 2 April 2019 Abstract: MXenes, carbon nanotubes, and nanoparticles are attractive candidates for electromagnetic interference (EMI) shielding. The composites were prepared through a filtration technique and spray coating process. The functionalization of non-woven carbon fabric is an attractive strategy. The prepared composite was characterized using X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDX), and Raman spectroscopy.
    [Show full text]
  • Terminal Groups-Dependent Near-Field Enhancement Effect of Ti
    Yang et al. Nanoscale Res Lett (2021) 16:60 https://doi.org/10.1186/s11671-021-03510-5 NANO EXPRESS Open Access Terminal Groups-Dependent Near-Field Enhancement Efect of Ti3C2Tx Nanosheets Ying‑Ying Yang1, Wen‑Tao Zhou1, Wei‑Long Song1, Qing‑Quan Zhu1, Hao‑Jiang Xiong1, Yu Zhang1, Sheng Cheng2, Pai‑Feng Luo1 and Ying‑Wei Lu1,3* Abstract Both multilayered (ML) and few‑layered (FL) Ti3C2Tx nanosheets have been prepared through a typical etching and delaminating procedure. Various characterizations confrm that the dominant terminal groups on ML‑Ti3C2Tx and FL‑ Ti3C2Tx are diferent, which have been assigned to O‑related and hydroxyl groups, respectively. Such deviation of the dominant terminals results in the diferent physical and chemical performance and eventually makes the nanosheets have diferent potential applications. In particular, before coupling to Ag nanoparticles, ML‑Ti3C2Tx can present stronger near‑feld enhancement efect; however, Ag/FL‑Ti3C2Tx hybrid structure can confne stronger near‑feld due to the electron injection, which can be ofered by the terminated hydroxyl groups. Keywords: Multilayered Ti3C2Tx, Few‑layered Ti3C2Tx, Terminal group, Near‑feld enhancement, Coupling Introduction of Ti2C and Ti3C2 [11], and O-related terminal groups Ti3C2Tx, a typical two-dimensional layered transi- could enhance the lithium ion storage capacity of various tion metal carbide with a graphene-like structure, has nanosheets [12]. Apart from the multifarious applications attracted great attention due to its wide potential appli- by taking advantage of the unique layered structure with cations in felds of catalysis, energy, and medicine thanks certain terminal groups, it is found that Ti 3C2Tx can pre- to its unique properties, especially large specifc surface sent plasmonic performance as well, and the resonance area and so on [1–6].
    [Show full text]