Air-Operated Double Diaphragm Pumps

1/2” TC-X152 Series The TC-X152 pump is designed to offer high flow rates, excellent chemical resistance, improved leak prevention and increased reliability. The TC-X152 series offer exceptional flow rates, low air consumption and solids handling. Fea- turing new Looped C™ Air Motor Technology (patent pending).

Maximum Flow Rate: 15.8 GPM (60 L/Min) Maximum Discharge Head: 230 ft (70 m) Available in: Stainless Steel, Aluminum, Pure Polypropylene, Conductive Polypropylene and PVDF (Kynar®) Spool valve type: Looped C-Spring Valve Check Valves: Flat Valves & Ball options Certification: CE, ATEX (select models), FDA (SS models)

SPECIFICATIONS A"X" S"X" P"X"-PP V"X" DT Material Code* C"X"-PC Max Flow Rate 15.8 GPM (60 LPM) 14.8 GPM (56 LPM) Max Air Pressure 100 PSI (0.7 MPa) Max Air Consumption 31.8 scfm (900 L/min) Supply Air Pressure Range 1 30-100 PSI (0.2-0.7 MPa) Liquid Discharge Volume per cycle 2.9 oz (85 mL) Connection Suction x Discharge NPT 1/2” Weight 9.0 lbs (4.1 kg) 14.8 lbs (6.7 kg) 6.8 lbs (3.1 kg) 9.3 lbs (4.2 kg) 8.4 lbs (3.8 kg) * See Chart and Model Number nomenclature on back page for materials Note 1: A supply air pressure of 30 PSI (0.2 MPa) or more is required to operate the pump. If the supply pressure is less than 30 PSI (0.2 MPa), the pump may not operate properly. Pump Liquid Temperature Range: P"X", C"X", V"X" 32-140°F(0~60°C) A"X", S"X" 32-158°F (0~70°C) CR, NBR Diaphragm 32-158°F (0~70°C) TPO, PTFE Diaphragm 32-212°F (0~100°C) Ambient Temperature Range: 32-158°F (0-70°C) Slurry Recommendation: A"X", S"X" 0.04" (1mm) or less P"X", C"X", V"X", DT Not recommended for use in slurry liquid Viscosity Limit: ~500 cps (0.5 Pa·s) (Please contact your distributor for more details)

PERFORMANCE CURVES

Conditions: Flow 4”(10 cm) flooded suction. Ambient temperature: 64°F (18°C) Air Liquid temperature: 63-68°F (17-20°C) Feet Meters TC-X152A/S Feet Meters TC-X152P/C/V 80 80 250 250 70 100 PSI 10.5 SCFM 70 100 PSI

14 SCFM 200 10.5 SCFM 200 60 90 60 90 14 SCFM 17.5 SCFM 50 75 50 75 17.5 SCFM 150 150 40 60 40 60 21 SCFM

21 SCFM 100 45 100 30 45 30 24.5 SCFM Discharge Head Discharge Discharge Head Discharge 24.5 SCFM 20 30 20 30 28 SCFM 28 SCFM 50 50 10 10 3.5 SCFM 3.5 SCFM 7 SCFM 7 SCFM 0 0 0 0 10 20 30 40 50 60 70 LPM 10 20 30 40 50 60 70 LPM Flow Flow 0 5 10 15 GPM 0 5 10 15 GPM Air-Operated Double Diaphragm Pumps

WET END MATERIALS Pump Flat Valve Outer Center AL Alloy Aluminum Alloy (ADC12) Code wetted parts Seat Diaphragm Plate Body AL Aluminum (A5056) Neoprene™ Rubber (CR) AC Neoprene™ Neoprene™ BUNA (NBR) AN BUNA BUNA Cast SS Cast Stainless Steel (SCS14) AT PTFE PTFE EPDM Ethylene propylene diene monomer (Nordel™) AL Alloy AL AL *SS303 Stainless Steel (Insert material) AH Hytrel™ BUNA SS316 Stainless Steel Grade 316* AS Santoprene® EPDM PPG Glass Fiber Reinforced Polypropylene AE EPDM EPDM PTFE (Teflon®) PVDF Polyvinylidene Fluoride (Kynar®) SC Neoprene™ Neoprene™ Hytrel™ Thermoplastic Polyester (TPEE) SN BUNA BUNA Santoprene® Thermoplastic PolyOlefin (TPO) ST PTFE PTFE Acetal Polyoxymethylene (POM) Cast SS SS316 SS316 SH Hytrel™ BUNA Pure Poly Pure Polypropylene (PP) Conductive Poly Conductive Polypropylene (PC) SS Santoprene® EPDM PPG SE EPDM EPDM * SS316 Multi-port Plug Material (metal pumps) PC Neoprene™ PN BUNA PT PTFE Pure Poly Pure Poly PTFE Pure Poly PH Hytrel™ (SS303*) PS Santoprene® PE EPDM DT Acetal PTFE Acetal Acetal Acetal (SS303*) VT PTFE VS PVDF Santoprene® PTFE PVDF PVDF (SS303*) VE EPDM CC Neoprene™ CN BUNA Conductive Conductive Conductive Poly Conductive CT PTFE PTFE Poly Poly (SS303*) Poly CH Hytrel™ CS Santoprene® DIMENSIONS TC-X152A, S TC-X152P, C, V, DT 8.1” (207mm) (8.2” (208mm)) 8.9” (228mm) (8.2” (208mm)) 4.3” 109mm) (5.2” (132mm)) 3.0” (76mm) 5.0” (127mm) (5.2” (132mm)) 3.0” (76mm) 6.9” (174mm) 6.9” (174mm)

FLUID OUTLET

EXHAUST 3 NPT /8

AIR INLET NPT ¼ 11.6” (295mm) 11.6” 8.0” (204mm) 8.0” 9.0” (230mm) 9.0” 12.3” (312mm) 12.3” 6.5” (166mm) 6.5” FLUID

INLET (153mm) 6.0”

0.39” (10mm) 4.9” (124mm) 2.0” (51mm) 0.39” (10mm) 2.0” (51mm) 6.1” (156mm) 5.9” (150mm) 6.2” (157mm) 1.9” (49mm) 4.9” (124mm) 1.25” (32mm) 5.9” (150mm) MODEL NUMBER NOMENCLATURE Series TC-X 152 P T - PP - BV - NPT Connection Type NPT: Threaded TC-X Check Valve Type Blank: Flat Valve BV: Ball Valve Pump Connection Size Other Designations: PP: Pure Poly Wetted Materials 152 (1/2” x 1/2”) Pump Body Material (wetted) PC: Conductive Poly Center Body Diaphragm Material P: Pure Poly A: Aluminum (ADC12) T: PTFE N: BUNA (NBR) D: Acetal (POM) S: Cast Stainless Steel H: Hytrel™ (TPEE) S: Santoprene® (TPO) V: PVDF (SCS14) C: Neoprene™ (CR) E: Nordel (EPDM) C: Conductive Poly

Five Boynton Road, Holliston, MA 01746 USA Tel: 508-429-1440 / [email protected] / www.IwakiAir.com IALT00326.G August 2019