DOCSLIB.ORG

Sig Sauer 516/716 Handguard Replacement Description

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Sig Sauer 516/716 Handguard Replacement Description © 2014 Lancer Systems all rights reserved Page 1 PROPRIETARY NOTICE: This contains Lancer Systems’ confidential, proprietary and/or competition sensitive data. ITAR NOTICE: “Warning – This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec. 2751, et. Seq.) or the Export Administration Act of 1979 as amended, Title 50 U.S.C. App. 2401 et, seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in Accordance with provisions of DOD Directive 5230.25.” Lancer Systems is AS9100C:2009 ISO9001:2008 CERTIFIED Page 2 Table of Contents Safety Rules …………………………………………………………………….. 4 Carbon Fiber Handguard ……...…………………………………………. 5 Description .…………………………………………………………. 5 Features and Options …………………………………………………. 5 Tool Box …………………………………………………………… 6 Clearing the Rifle …………………………………………………. 6 - 7 Removal of original handguard ……………………………………….. 8 Installation of Lancer handguard ……………………………………….. 9 - 13 Page 3 Safety Rules Cardinal Rules of Firearms Safety 1. Treat every firearm as if it were loaded until positively ascertained otherwise by you 2. Never point a firearm at anything or anybody that you do not intend to shoot, or in a direction where an unintentional discharge may do harm 3. Never place your finger into the trigger guard until ready and justified to fire 4. Be sure of your threat, backstop and beyond Rendering a Firearm Safe 1. Always point a firearm in the safest direction (MUZZLE AWARENESS) 2. Safety ON (if applicable) 3. Magazine removed (or cylinder open, unload cylinder) 4. Bolt, slide or cocking lever locked to the rear 5. Visually and physically inspect the chamber NOTE: Wear eye protection during disassembly and reassembly of your firearm. Page 4 Sig Sauer 516/716 Handguard Replacement Description: CARBON FIBER HANDGUARDS Piston Rifle Designed to fit popular rifles with piston operating systems, the Lancer Piston Rifle carbon−fiber handguards will replace the OEM handguard and offer a substantial weight savings without sacrificing performance. FEATURES & OPTIONS • Free Float Design • Available in multiple lengths • Octagon Carbon-Fiber Tube • Aluminum Receiver Extension with built in Picatinny rail • Clearance to access gas block • Dimensions: o Outside Diameter – 2” o Inside Diameter – 1.7” • SIG 516/716 extended handguards have a cut-out exposing the gas block top rail and access to gas adjustment. The Picatinny rail does not extend beyond the gas block PART NUMBER DESCRIPTION LENGTH WEIGHT LCH516-C Handguard for sig 516, carbine length with top rail 7.25 " 7.9 oz LCH516-CX Handguard for sig 516, extended length with top rail 13.1 " 9.8 oz LCH716-C Handguard for sig 716, carbine length with top rail 7.4 " 8.3 oz LCH716-CX Handguard for sig 716, extended length with top rail 13.1 " 10.3 oz Page 5 Tool Box: 5/32, 3/32, 5/64, 1/8, inch hex keys Left, right, front and back is established by placing the firearm or part/component in the shooting oriented position. Clearing the rifle Before disassembling, ensure the rifle and magazine are completely unloaded and free of ammunition, as follows: With the rifle pointed in the safest direction 1. Move the safety selector to the “safe” position. Page 6 2. Remove the magazine 3. Pull the charging handle to the rear and depress the bolt lock to hold the bolt carrier assembly open. 4. Visually and physically check that the chamber is clear of any ammunition. 5. Keeping fingers clear of the ejection port, depress the bolt lock and close the bolt carrier assembly. (DO NOT press the trigger) Page 7 Removal of the original handguard. Note: Rifle may remain complete during this procedure. There is no need to field strip the rifle. 1. Using a 3/32 hex key, remove the front side screws from the underside of the handguard. 2. Repeat for the rear handguard screws. 3. Remove the handguard, now in two pieces, from the rifle. Disassembly is complete. Page 8 Installation of the Lancer Handguard Lancer handguard pieces: 1. Place the top Picatinny rail component onto the rifle, ensuring the tab is aligned in the receiver. 2. Turn the rifle over and place the locking piece on the bottom of the barrel with the lug seated in the recess. Page 9 3. Hold the bottom collar in place. 4. Insert four screws securing the collar to the Picatinny rail component. 5. Using a 5/32 hex key, tighten the four screws. Page 10 6. Place the bushing on top of the bottom collar aligning the holes. The flat edge of the bushing faces the receiver. 7. Ensure the bushing, bottom collar and locking piece holes are all aligned. Insert screws into the assembly and tighten the two screws with a 1/8 inch hex key. 8. Orient the carbon fiber handguard with the large, long opening to the top. Front Page 11 9. Slide the handguard over the barrel, continuing back towards the receiver. 10. Engage the upper rear edge of the handguard into the slots of Picatinny rail component on both sides. 11. Continue the handguard to the rear, ensuring the side cutouts of the handguard startle the lugs of the collar and Picatinny rail assembly. 12. Continue the handguard back to the receiver. Page 12 13. Using a 3/32 inch hex key, insert and tighten the four bottom handguard screws. 14. Using a 5/64 inch hex key, insert and tighten the side screws (2) one each side. Handguard installation is complete. Page 13 .
Load more

Recommended publications
  • Sig Sauer - MCX Mandatory Carriage Assembly Replacement Program
    Sig Sauer - MCX Mandatory Carriage Assembly Replacement Program SIG SAUER is conducting a mandatory replacement of the carriage assembly in SIG MCX rifles. Sig has found through extensive factory testing that in extremely rare instances, not reported in the field and extremely difficult to replicate, a condition may exist causing an unintended discharge. Failure to follow the loading procedures and basic rules of safe firearms handling outlined in the user’s manual has the potential to cause serious bodily harm or death. Although this has only been witnessed in 300 blackout, SIG has decided to upgrade all MCX models since the MCX is a modular platform and we want to ensure the quality and reliability of all products we manufacture. Stop use of firearm immediately, and visit the SIG SAUER website listed below as soon as possible to register your firearm, initiate the process and view a video explaining how to change out your carriage assembly. SIG will send you a prepaid box to return your complete carriage assembly to the factory. A new assembly, designed with the firing pin locking mechanism, will be shipped out to you within 5-7 working days of the receipt of your parts at no cost to you. Please note total in transit times will vary based on geographic locations. SIG will also send you a $50 gift voucher for any inconvenience this may have caused. This upgraded carriage assembly addresses this potential issue while enhancing the performance and longevity of your rifle. You may also contact Sig Sauer customer service at the number below with any questions if needed.
    [Show full text]
  • Sig716® Patrol Rifle
    SIG716® PATROL RIFLE SIG716 PATROL RIFLE SIG716features Advanced Short Stroke Pushrod Gas System, With Four Position Adjustable Gas Valve 7.62 X 51mm NATO Chrome-Lined Barrels with Phosphate Finish 16” free-fl oating match barrel: 1 in 10” 5/8” x 24 TPI Threaded Muzzle Free Floating Aluminum M1913 Quad Rail Forend Flat Top Upper With M1913 Accessory Rail SIG716 PATROL RIFLE SPECIFICATIONS Caliber 7.62 X 51 mm NATO Overall Length 37.4” Length with Stock Collapsed 34.3” Overall Height 7.31” Barrel Length Without Flash Suppressor 16” Barrel Contour HBAR Rifl ing Lead 1 in 10” Number of Grooves 6 Muzzle Brake Mil-Spec Sight Radius 14.2” Weight without Magazine 9.3 lbs Magazine Type Magpul PMAG Magazine Capacity 20 Rounds Trigger Mil-Spec Trigger Pull† 7.6 lbs Specifi cations are approximate and subject to change. SIG716® Familiar Handling, Unfamiliar Power, SIG SAUER® has taken the proven features of the SIG716™ and applied them into a potent AR- based rifl e chambered in 7.62 x 51mm. Utilizing the short stroke pushrod operating system, an M1913 Mil-Std rail, free-fl oating barrel, aluminum quad rail forend, telescoping stock, and Magpul® SIG716 PMAG®, the SIG716 is the rifl e of choice when you require the power of a larger caliber carbine. Ambidexterous Magazine Release Fire Control Selector Three Position Adjustable Gas Valve SIG SAUER, Inc., 18 Industrial Drive, Exeter, NH, USA 03833 USA • (603) 772-2302 • www.sigsauer.com An ISO 9001: 2008 Certifi ed Company, Manufacturing in Exeter, New Hampshire SIG SAUER, Inc.
    [Show full text]
  • TECHNICAL DATA SHEET SIG SAUER SP2022 PRO 9Mm BLANK
    TDS_01-2251 Sig Sauer SP2022 PRO 9mm Blank Kit TECHNICAL DATA SHEET Compatible UTM Ammunition Types SIG SAUER SP2022 PRO 9mm BLANK KIT Identifiers Kit Contents Calibre (UTM Ammunition): 9mm The Conversion Kit consists of a replacement Barrel Assembly. Origin: United Kingdom/United States P/N: 01-2251 NSN (NATO): TBC Operational Data Gross Package: Plastic Case. 127mm (5.00in) x 38mm (1.50in) x 28mm (1.10in) Operation: Semi-Automatic. Gross Weight 0.149kg (.33lb) Feed: Magazine. Safety Features • ‘Live Round Lockout’. • Non-Locking barrel; direct blowback only. • Black indicators for easy identification the training barrel is installed. Warranty UTM warrants that all firearm conversion kits will be free of defects in design, workmanship and materials, for a period of twenty-four (24) months following the date of delivery. Guidelines & Warnings • UTM converted weapons must be fired “clean and dry” in the weapon bore and barrel. NO LUBRICATION IN THE BARREL. • Keep all ammunition out of reach of children. • UTM assumes no responsibility for injuries, loss or damage resulting from misuse of this or any of its products. When converting back to ‘Duty’ use, ensure that the chamber and bore have been cleaned, cleared of all debris, objects or projectiles and inspected before firing a live round. Failure to ensure that the barrel of the host weapon is free form obstruction could result in damage to the barrel and/or injury to the operator. European Patent number: 1228342 additional patents pending. US patent numbers: 6253682, 6371028, 6427600, 6095051, 6378439,6422149, 6415718, 6564719 UTM, Ultimate Training Munitions, and the “Breech” logo design are trademarks belonging to UTM Ltd.
    [Show full text]
  • MCX VIRTUS Owner's Manual
    ® TM SIG MCX VIRTUS OPERATOR’S MANUAL: HANDLING & SAFETY INSTRUCTIONS READ THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL CAREFULLY BEFORE USING THIS FIREARM. DO NOT DISCARD THIS MANUAL. THIS MANUAL SHOULD ALWAYS ACCOMPANY THIS FIREARM AND BE TRANSFERRED WITH IT UPON CHANGE IN OWNERSHIP, OR WHEN THE FIREARM IS PRESENTED TO ANOTHER PERSON. WARNINGS 1.0 Safety Warnings READ THIS ENTIRE MANUAL THOROUGHLY AND CAREFULLY PRIOR TO USING THIS FIREARM. The warnings in this operators manual are extremely important. By understanding the dangers inherent in the use of any fi rearm, and by taking the precauti ons described in this manual, you can experience a higher level of safety in the use of your fi rearm. Failure to heed any of these warnings may result in serious injury or death to you or others, as well as severe damage to the fi rearm or other property. WARNINGS in this manual identify a clear danger to the person performing that procedure. Warnings are identified by a red banner with the word WARNING in black, bold, uppercase letters and a WARNING icon. Failure to comply with a WARNING can result in serious injury or death to you or a bystander. WARNING CAUTIONS in this manual identi fy a risk of damage the fi rearm being maintained. CAUTIONS are identi fi ed by a black banner with the word CAUTION in white, bold, uppercase lett ers. 1.0 Safety Warnings CAUTION 2 WARNINGS 1.0 Safety Warnings SIG SAUER fi rearms are designed to functi on reliably with proper care and knowledgeable use.
    [Show full text]
  • Understanding the Sig Sauer MCX Assault Rifle Used in the Orlando Mass Shooting
    Understanding the Sig Sauer MCX Assault Rifle Used in the Orlando Mass Shooting Violence Policy Center June 2016 Violence Policy Center www.vpc.org The Sig Sauer MCX Assault Rifle Early in the morning of June 12, 2016, Omar Mateen, age 29, opened fire with a Sig Sauer MCX assault rifle at Pulse, a gay dance club in Orlando, Florida. Mateen killed 49 people and wounded 53 others. In addition to the Sig Sauer assault rifle, Mateen was also carrying a Glock semiautomatic pistol. The two weapons had been legally purchased earlier in the month from the St. Lucie Shooting Center in Port St. Lucie, Florida. Mateen was killed in a shootout when law enforcement stormed the building around 5:00 AM that morning. The massacre is the worst mass shooting in U.S. history.1 2 The MCX is a classic assault rifle and incorporates many of the characteristics that make this category of firearm so lethal and distinguish it from sporting rifles. The MCX uses detachable ammunition magazines and comes equipped with a 30-round magazine like those used in the Orlando mass shooting. The MCX is also designed with: a pistol grip; a folding, collapsible, or telescoping stock; and, a handguard. These characteristics enhance the gun’s lethality by making it easier to shoot, reload, and maneuver in closed spaces such as a dark nightclub. This backgrounder offers a brief overview of the Sig Sauer MCX assault rifle, key points about assault weapons, and a discussion about what makes assault weapons different from standard hunting and sporting firearms.
    [Show full text]
  • P320 ® P320 ® X-Series
    ® P320 ® P320 ® X-SERIES OPERATOR’S MANUAL: HANDLING & SAFETY INSTRUCTIONS READ THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL CAREFULLY BEFORE USING THIS FIREARM. DO NOT DISCARD THIS MANUAL. THIS MANUAL SHOULD ALWAYS ACCOMPANY THIS FIREARM AND BE TRANSFERRED WITH IT UPON CHANGE IN OWNERSHIP, OR WHEN THE FIREARM IS PRESENTED TO ANOTHER PERSON. WARNING 1.0 SAFETY WARNINGS Read this entire manual thoroughly and carefully prior to using this SIG SAUER firearm. The warnings in this operator’s manual are important. By understanding the dangers inherent in the use of any firearm, and by taking the precautions described in this manual, you can experience a higher level of safety in the use of your firearm. Failure to heed any of these warnings may result in serious injury or death to you or others as well as severe damage to the firearm or other property. As a valued SIG SAUER customer, we encourage you to visit www.sigsauer.com. There you will find links to product information and updates, merchandise promotions, and educational videos that will be of interest to you as an owner of SIG SAUER products. SIG SAUER firearms are designed to function reliably with proper care and knowledgeable use. You must understand the safe operation and use of your SIG SAUER firearm. Read and follow these directions carefully. Do not use the firearm unless you fully understand these instructions and the safe operation of your firearm. Failure to heed any of these directions may result in serious injury or death to you or others as well as severe damage to the firearm or other property.
    [Show full text]
  • Sig Mcx® Owners Manual: Handling & Safety Instructions
    SIG MCX® OWNERS MANUAL: HANDLING & SAFETY INSTRUCTIONS READ THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL CAREFULLY BEFORE USING THIS FIREARM; DO NOT DISCARD THIS MANUAL. This instruction manual should always accompany this fi rearm and be transferred with it upon ownership, or when the fi rearm is loaned or presented to another person. State-By-State Warnings Certain states require, by law, that their own specified warning notices, in larger-than-normal type be conspicuously included by the manufacturer, distributor, or retail dealer with firearms sold in that state. SIG SAUER sells its products in compliance with applicable laws and regulations. Because our products may be sold in these states, we include the following: CALIFORNIA: WARNING ADVERTENCIA “Children are attracted to and can operate firearms that “A los niños atraen las amas de fuego y las pueden hacer can cause severe injuries or death. Prevent child access funcionar. Ellos pueden causarse lesions graves y la by always keeping guns locked away and unloaded when muerte. Evite que los niños tengan accesso a las armas de not in use. If you keep a loaded firearm where a child fuego guardándolas siepre con llave y descargadas cuando obtains and improperly uses it, you may be fined or sent no las esté utilizando. Si usted tiene una arma de fuego to prison.” cargada en un lugar en que un niño tiene accesso a ella y la usa indebidamente, le pueden dar una multa o enviarlo a la carcel.” CONNECTICUT: “UNLAWFUL STORAGE OF A LOADED FIREARM MAY RESULT IN IMPRISONMENT OR FINE.” FLORIDA: “IT IS UNLAWFUL, AND PUNISHABLE BY IMPRISONMENT AND FINE, FOR ANY ADULT TO STORE OR LEAVE A FIREARM IN ANY PLACE WITHIN THE REACH OR EASY ACCESS OF A MINOR UNDER 18 YEARS OF AGE OR TO KNOWINGLY SELL OR OTHERWISE TRANSFER OWNERSHIP OR POSSESSION OF A FIREARM TO A MINOR OR A PERSON OF UNSOUND MIND.” 2 www.sigsauer.com MAINE: “ENDANGERING THE WELFARE OF A CHILD IS A CRIME.
    [Show full text]
  • I. Purpose Ii. Policy Iii. Definitions Iv. Weapons
    Policy Title: Effective Date: Policy Number: Firearms 8.20 June 28, 2016 Accreditation Reference: Review Date: Supercedes: Pages: 1.3.5 June 28, 2019 April 15, 2015 7 Attachments: 8.20 Appendix A 8.20 Appendix B 8.20 Appendix C L. Shane Nelson, Sheriff I. PURPOSE It is the purpose of this policy to provide deputies and Field Law Enforcement Technicians (FLETs) with guidelines associated with the use, maintenance, safety, and qualification requirements related to agency authorized firearms. II. POLICY For purposes of this policy, the term “deputy” shall include Field Law Enforcement Technicians (FLETs). It is the policy of the Deschutes County Sheriff’s Office that deputies adhere to the requirements established herein in order to ensure the safe handling and use of service firearms. III. DEFINITIONS CERT is the Central Oregon Emergency Response Team. SOT is the Special Operations Team. IV. WEAPONS: AUTHORIZATION, ISSUE AND TYPE Any firearm carried by a deputy of the Sheriff’s Office under "color of law" shall be authorized by the Sheriff, approved by the training coordinator, and the employee shall have demonstrated proficiency with the weapon as required. A. Issue When agency-owned firearms are issued to deputies it shall be by the training coordinator or designee. The weapon will be recorded in agency records to include make, model, caliber and serial number. B. Duty Handguns Duty handguns are those handguns that are carried by deputies as their primary firearm during the course of their normal duty functions. A duty handgun shall be only that firearm issued by the agency or an individually owned weapon of exactly the same make, model, and caliber if specifically authorized by the Sheriff and approved by the training coordinator.
    [Show full text]
  • M17® Semi-Automatic Co2 Pellet Pistol Owners Manual: Handling & Safety Instructions Warning
    M17® SEMI-AUTOMATIC CO2 PELLET PISTOL OWNERS MANUAL: HANDLING & SAFETY INSTRUCTIONS WARNING READ THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL CAREFULLY BEFORE USING THIS CO2 AIRGUN; DO NOT DISCARD THIS MANUAL. This instruction manual should always accompany this CO2 airgun and be transferred with it upon ownership, or when the CO2 airgun is loaned or presented to another person. M17 Operators Manual for Translation.indd 1 7/3/2018 10:01:09 AM TABLE OF CONTENTS 1.0 Safety Rules 3 2.0 Description 4 3.0 How to Operate Safety 5 4.0 Removing Magazine/CO2 Housing 6 5.0 Installing/Removing CO2 Cylinder 7 6.0 How to Load Magazine 8 7.0 Aiming/Firing at a Safe Target 8 8.0 Unloading Ammunition From Magazine 9 9.0 Removing Jammed Ammunition 9 10.0 Troubleshooting-Pellet Does Not Fire 11 11.0 Safe Use and Handling of CO2 Cylinders 12 12.0 Repairs and Returns 13 13.0 Storage 14 14.0 Routine General Maintenance 14 READ THIS OWNER’S MANUAL COMPLETELY.WARNING THIS CO2 AIRGUN IS NOT A TOY. TREAT IT WITH THE SAME RESPECT YOU WOULD A FIREARM. ALWAYS CAREFULLY FOLLOW THE SAFETY DIRECTIONS FOUND IN THIS OWNER’S MANUAL AND KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE USE. THIS AIRGUN IS NOT A TOY. MISUSE OR CARELESS USE MAY CAUSE SERIOUS INJURY OR DEATH. INTENDED FOR ADULT USE ONLY. MAY BE DANGEROUS UP TO 224 YARDS (205 METERS). READ ALL INSTRUCTIONS BEFORE USING. IT IS THE PURCHASER’S/USER’S RESPONSIBILITY TO CONFORM TO ALL LAWS GOVERNING USE AND OWNERSHIP OF CO2 AIRGUNS.
    [Show full text]
  • Sig Sauer Mexico Fact Sheet March2017
    Fact Sheet on Sig Sauer Arms Exports to Mexico • On March 25, 2015, the Department of State notified Congress of a Direct Commercial Sales (DCS) license agreement for Sig Sauer, Inc. to sell “the manufacture of Sig Sauer rifles and pistols and refurbishment of existing inventories” for the Mexican military and federal and state police forces, for a value of up to $266 million.1 • The State Department clarified that only $1.1 million of the agreement is for services, technical data, and other materials; the remaining $265 million is for firearms.2 At current retail values for pistols and rifles, the full execution of this agreement would mean the transfer of approximately 300,000 to 400,000 firearms – an enormous amount. • Licenses for DCS arms exports are normally valid for four years from the date of the agreement. In the case of the Sig Sauer, the agreement therefore would be valid until March 2019. • According to Mexico’s formal declaration for 2015 under the Arms Trade Treaty, Sig Sauer delivered 7,384 firearms to Mexico in 2015: 3,060 assault rifles; 505 machine guns; and 3,819 pistols.3 Based on retail values of Sig Sauer firearms shown online, the value of this sale is approximately $7.1 million. • The Mexican Secretariat of National Defense (SEDENA, the Mexican Army) also acquired an unknown number of Sig Sauer pistols in 2008 – presumably from an earlier agreement – and in 2016.4 • The United States exported $15.3 million to Mexico in firearms from all producers in 2016, in addition to nearly $20 million in firearm parts, according to U.S.
    [Show full text]
  • Sig516® Gen2 Operator Manual: Handling & Safety Instructions
    SIG516® GEN2 OPERATOR MANUAL: HANDLING & SAFETY INSTRUCTIONS READ THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL CAREFULLY BEFORE USING THIS FIREARM; DO NOT DISCARD THIS MANUAL. This instruction manual should always accompany this fi rearm and be transferred with it upon ownership, or when the fi rearm is loaned or presented to another person. State-By-State Warnings Certain states require, by law, that their own specified warning notices, in larger-than-normal type be conspicuously included by the manufacturer, distributor, or retail dealer with firearms sold in that state. SIG SAUER sells its products in compliance with applicable laws and regulations. Because our products may be sold in these states, we include the following: CALIFORNIA: WARNING ADVERTENCIA “Children are attracted to and can operate firearms that “A los niños atraen las amas de fuego y las pueden hacer can cause severe injuries or death. Prevent child access funcionar. Ellos pueden causarse lesions graves y la by always keeping guns locked away and unloaded when muerte. Evite que los niños tengan accesso a las armas de not in use. If you keep a loaded firearm where a child fuego guardándolas siepre con llave y descargadas cuando obtains and improperly uses it, you may be fined or sent no las esté utilizando. Si usted tiene una arma de fuego to prison.” cargada en un lugar en que un niño tiene accesso a ella y la usa indebidamente, le pueden dar una multa o enviarlo a la carcel.” CONNECTICUT: “UNLAWFUL STORAGE OF A LOADED FIREARM MAY RESULT IN IMPRISONMENT OR FINE.” FLORIDA: “IT IS UNLAWFUL, AND PUNISHABLE BY IMPRISONMENT AND FINE, FOR ANY ADULT TO STORE OR LEAVE A FIREARM IN ANY PLACE WITHIN THE REACH OR EASY ACCESS OF A MINOR UNDER 18 YEARS OF AGE OR TO KNOWINGLY SELL OR OTHERWISE TRANSFER OWNERSHIP OR POSSESSION OF A FIREARM TO A MINOR OR A PERSON OF UNSOUND MIND.” 2 www.sigsauer.com MAINE: “ENDANGERING THE WELFARE OF A CHILD IS A CRIME.
    [Show full text]
  • 2019 Gds Catlog Working
    ® TM SIG SAUER, Inc. • 72 Pease Boulevard • Newington, NH 03801 USA • +1 (603) 610-3000 An ISO 9001:2015 Certifi ed Company. Manufacturing in the U.S.A. All trademarks, service marks, trade names, trade dress, product names and logos appearing in this catalog are the property of their respective owners. No trademark or service mark appearing in this catalog may be used without the prior written consent of the owner. MKT0478 REV01 sigsauer.com SIGSAUER.COM | TABLE OF CONTENTS PISTOLS P320 5 ADVANCED WEAPON SYSTEMS P365 11 FOR DEFENSE AND LAW P226 13 ENFORCEMENT P229 15 SP2022 17 At SIG SAUER our mission is to provide elite end users with the complete weapons system they need to prevail under any circumstance. By combining industry-leading product RIFLES innovation, with decades of battle-tested experience, we have engineered the world’s toughest, most accurate, most precise, and most dependable, pistols, rifles, electro-optics, SIG MCX 19 suppressors, and ammunition available. Designed and built in the U.S.A. and ready to perform whenever and wherever the need arises. SIG MCX RATTLER 23 SIG MPX 25 SIG516 27 SIG716 DMR 29 SIG716 31 SIGM400 33 AMMUNITION 35 ELECTRO-OPTICS 37 SUPPRESSORS 43 ULTIMATE TRAINING MUNITIONS 45 SIG SAUER ACADEMY 47 TM 3 | | 4 ® BARRELS GRIP MODULES THE STRIKER-FIRED COMPACT STANDARD IN MODULARITY P320 AND ADAPTABILITY. POLYMER PISTOL POLYMER THE MOST ADAPTABLE SLIDE ASSEMBLY PISTOL EVER. P320 P320 CARRY SERIALIZED, STAINLESS STEEL FRAME Unique design gives you the FU LL-SIZE freedom to change calibers, sizes, and fi t – quickly and easily.
    [Show full text]