Digital Vision Network (DVN) Visionweb Catalog Page
Total Page:16
File Type:pdf, Size:1020Kb
Code No. LIT-1900296 Issued November 4, 2011 Digital Vision Network VisionWeb Description The VisionWeb application is available as part of the Johnson Controls® Digital Vision Network (DVN) suite of products. The DVN solution provides a fully featured digital audio/video recording and management system for 8, 16, or 32 cameras. Additional functionality allows simultaneous recording, viewing, playing back, archiving, and transmitting of audio and video from any connected camera. VisionWeb is a Microsoft® Internet Explorer® Web browser-based client software used to remotely access DVN servers, either via the Internet or Local Area Network (LAN)/ Wide Area Network (WAN). There is no special hardware or software required to run VisionWeb – all of the required components are built into the DVN server and are automatically downloaded upon request. VisionWeb turns any computer with Microsoft Main Screen Internet Explorer Web browser into a digital Closed Circuit Television (CCTV) workstation. Features • Streaming Live/Recorded Video Our true client-server architecture and built-in Web server enable us to provide a Web browser-based client software capable of delivering extremely high quality, live and recorded video and audio, as well as full Pan/Tilt/Zoom (PTZ) camera control in real time, over the Internet to anywhere in the world. • Synchronized Audio You can receive live and recorded audio, and transmit live audio (talk back) to the server. • PTZ Control PTZ control is available for cameras with pan/tilt/zoom capability by dragging the mouse pointer on the screen. The following PTZ camera protocols are currently supported (analog cameras use RS232/422 or USB via DVN-DOMECONT): • Supported AXIS™ PTZ network • Star Micronics™ Protocol cameras, Panasonic® PTZ network • Pelco® (D-Protocol & P-Protocol) cameras, and Sony® PTZ network • Kalatel® Cyberdome Protocol cameras; for current information on Note: The Kalatel KTD-312 converter is supported PTZ network cameras, required for RS232. refer to the DVN 5000 Version 2.10 • Vicon® Protocol Software Release Notes (Part No. • JVC™ TK-C67x Series Protocol 24-10318-37). • Alec Dragon Protocol • Sensormatic SpeedDome®/ DeltaDome Protocol • Samsung® Protocol • Bosch Autodome Protocol • VCL (VCLTP Protocol) Note: A bi-phase converter (Bosch • Ernitec (ERNA Protocol) Part No. LTC8782/x0-10) is required • Vision 360 Protocol for RS485. No extra hardware is • Max-Pro Protocol required for RS232. • Hitachi® SpeedDome Protocol • Panasonic (Conventional and • CBC® Dome Protocol Extended) Protocol • Sanyo® (SSP Protocol) Control Panel • Split Video Window You can view up to 16 cameras simultaneously. • Multiple Transmission Modes Full, Common Intermediate Format (CIF), Quarter Common Intermediate Format (QCIF), and Delta transmission modes are supported. • Selectable User Interface Vision has a full user interface or a light user interface for a simple, fast-loading interface allowing camera selection only. • Online Help VisionWeb includes a Help link that opens online documentation for user assistance. The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2011 Johnson Controls, Inc. www.johnsoncontrols.com 1 of 2 VisionWeb (Continued) System Requirements VisionWeb runs on an ordinary computer workstation with the following minimum requirements: Hardware/Software Minimum Requirement CPU Intel® Core™2 Duo E8500 Processor (3.16 GHz, 6 MB L2 cache, 1333 MHz Front Side Bus [FSB]) RAM 3 GB, DDR3 SDRAM, 1333 MHz or better Pointing Device Any standard mouse (wheel mouse recommended) Video PCIe ATI® Radeon X1300 chipset-based video card, 256 MB Video RAM or better Hard Drive 80 GB SATA or better Network Intel-based 100 Base-T or better Peripherals Internal CDRW, or DVDRW Other Interfaces USB 2.0 Operating System Microsoft Windows® 7 (32-bit or 64-bit) Operating System (OS) or Microsoft Windows XP® Professional OS with SP2 Ordering Information Product Name Description (Part Number) SiteManager1,2 Full TCP/IP Multi-server Client SiteManager™ software (one client license – required per DVN server) (DVN-SW-SMGR1) SiteManager1,2 Full TCP/IP Multi-server Client SiteManager software (five client licenses – required per DVN server) (DVN-SW-SMGR5) SiteManager1,2 Full TCP/IP Multi-server Client SiteManager software (unlimited access licenses – required per DVN server) (DVN-SW-SMGRUNL) RemoteControl Full TCP/IP Client RemoteControl software (unlimited access licenses – included with purchase) VisionPocket Software for compatible PDAs (included with purchase) 1. Software user licenses are required per DVN server. 2. SiteManager is an optional software package which requires a license activation purchase and connectivity to multiple DVNs. On some prior versions, the activation process could be bypassed; however, SiteManager will no longer be possible to enable without proper authorization. Related Documentation Document Title Document Number DVN 5000 Series Software User Manual Part No. 24-10248-13 DVN VisionWeb Product Bulletin LIT-1201839 The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2011 Johnson Controls, Inc. www.johnsoncontrols.com 2 of 2.