POWER CUSTOM RUGER® 10/22® POWER CUSTOM RUGER® 10/22® RIFLE INDEX COMPETITION TRIGGER PARTS PRE-TRAVEL ADJUSTABLE 10/22 Performance Parts ...... 151-154 Magazine Releases...... 173 Drop In Parts For Reduced Trigger Pull; Provide Smoother HAMMER & SEAR KIT AK-47 Parts ...... 154-155 Magazines & Parts...... 173-179 Function & Improved Accuracy Eliminates Pre-Travel For

“Power Custom” has become a much-respected name among A Clean, Crisp Trigger Pull RIFLE Barrels - Centerfire ...... 165-168 Muzzle Brakes...... 169-172 folks who love to accurize the dependable, affordable 10/22. Power Barrels - Rimfire...... 168-169 Receivers & Chasis...... 155-157 Custom offers high-quality, drop-in, EDM machined parts that pro- Easy-to-install kit re- vide improved performance at a fraction of the cost of expensive places factory parts to Bolt Components...... 157-159 Recoil Lugs...... 165 hand fitting. ab eliminate trigger pre-travel and roughness for a clean, Bottom Metal & Screws ...... 179-182 Safeties...... 159-160 PRETRAVEL ADJUSTABLE COMPETITION TRIGGER KIT - Drop- crisp, custom pull with little in, EDM machined parts kit includes a or no gunsmithing. Adjust Extractors...... 160 Springs/Recoil Buffers...... 182-183 pre-travel adjustable sear so you can the setscrew in the sear with achieve a custom trigger pull that per- the included Allen wrench Firing Pins ...... 159 Stocks...... 183-191 forms exactly to you liking. Matched to take up pre-travel, then lock screw in place with your favorite hammer further helps reduce trigger thread locking adhesive. Sear and hammer geometry is custom de- Gas System Parts ...... 164-165 Triggers ...... 160-164 take-up to ensure a crisp trigger pull for signed to produce a lighter pull and a smoother trigger return. EDM improved accuracy. Includes everything machined from A2 tool steel and heat treated to Rc 56-58, with Hammers/Sears...... 164 needed to produce a light, crisp trigger precision-ground engagement surfaces vapor honed for smooth-

for the 10/22: overtravel adjustable Tita- ness. Some guns may require minor fitting for correct engagement 10/22 p erf o r manc e pa r ts nium trigger, two hammer and two trig- of safety, described in the detailed instructions. Hammer/sear sets ® ® 3 FORCE RUGER 10/22 ® ® ger shims, extra power hammer spring, are produced as matched pairs with 2 /4 lb. pull weight plus or minus JARD RUGER 10/22 extra power disconnector spring, extra 4 oz. Shims are precision manufactured from .004" thick 302 stain- TRIGGER SYSTEM TRIGGER SYSTEM power trigger return spring, sear assem- less steel and tempered for superior wear resistance. Use them to Drop-In Match-Grade Trigger With bly pin, and trigger pivot pin. center trigger and sear for additional smoothness and consistency SPECS: Titanium trigger, matte black finish. Other parts, steel, matte blue of pull and cleaner break by minimizing friction between the sear Pre-/Over-Travel Adjustment & Complete, Drop-In Trigger Assembly Delivers Match-Quality Pull finish. Heat treated to Rc 56-58. Includes assembly pin and instructions. and the inside of the trigger. Kits DO NOT fit 10/22 Magnum. Sear Kit Extended Magazine Release #713-000-079AS 10/22 Pre-Travel Adjustable Trigger is compatible with factory original and aftermarket hammers with Self-contained, drop-in replacement Machined aluminum trigger housing Kit, 3A123D59​ ����������������������������������������� $ 127.99 the correct engagement angle for drop-in installation; minor fitting for factory trigger module has a fully machined billet aluminum with hardened, steel components replaces may be required on some guns. ab housing that keeps the hardened tool steel internal components the non-adjustable, factory trigger in your Ruger 10/22 for a crisp, COMPETITION TRIGGER KIT - SPECS: Steel, in-the-white. Sear Kit – Includes sear, disconnector/sear in precise alignment. Ensures a smooth, clean, match-grade, 3 lb. consistent, single stage trigger pull worthy of the finest match rifle. Everything you need to produce spring, 2 sear shims, trigger pivot pin, cheater pin. Hammer & Sear Kit – trigger pull for superb shot-to-shot consistency, smaller groups, Redesigned two-lever system puts the sear engagement point at a light, crisp trigger for the 10/22. Includes Sear Kit contents plus extra-power hammer spring, 2 hammer and higher scores. Features a wide, serrated, semi-flat trigger shoe, the backside of the hammer for improved leverage that lightens EDM matched hammer and sear, shims, replacement trigger return spring. Complete installation instruc- adjustable for over-travel. Redesigned radius on the rear of the trig- pull weight to approximately 1.5 or 2.5 lbs. Extra-power hammer overtravel adjustable titanium trig- tions included. Kits DO NOT fit 10/22 Magnum. ger and a realigned trigger plunger hole help minimize friction for an spring ensures fast, positive primer ignition. Adjustments for sear ger, two hammer and two trigger #713-000-071AS Pre-Travel Adj. 10/22 Hammer & Sear ultra-smooth pull. Disconnector has sear adjustment setscrew that engagement and overtravel allow precise tuning to eliminate creep. shims, extra power hammer spring, Kit, 3A71F33​ �����������������������������������������������$ 73.99 lets you eliminate creep and improve trigger feel. Unique magazine Includes pivoting ejector, magazine latch, and push-button safety. extra power disconnector spring #713-000-070AS Pre-Travel Adj. 10/22 Sear Kit, ​ release extends under the triggerguard to position the contact sur- Spring-loaded, bolt lock lever disengages automatically when bolt and extra power trigger return 3A35G62 ����������������������������������������������������� 36.99 face in easy reach and provide extra leverage for fast, easy magazine is pulled rearward for easy, one-handed bolt operation. Drop-in in- spring. Recoil buffer included. changes. Comes with the housing, extended magazine release le- stallation using the factory receiver cross-pins. ab SPECS: Titanium trigger, silver matte finish. Other parts, steel, matte blue SPECS: Housing/Triggerguard - Aluminum, matte black or silver. Com- ver, fixed ejector, and trigger/and assembly installed. ab 1 7 finish. Heat treated to Rc 56-58. Includes assembly pin and instructions. ponents - Steel, matte black3-7/8" (9.8cm) long, 1 /4" (3.2cm) wide, 2 /8" SPECS: Housing/Trigger/Mag Release Lever - 6061 T6 aluminum, hard- #713-123-000AS 10/22 Trigger Kit, 3A111N44​ �����������������$ 115.99 coat anodized, matte black. Hammer/Sear/Disconnector - A2 tool steel (7.3cm) high. Approx. 1.5 lb. or 2.5 lb. pull weight. Fits Ruger 10/22 .22LR only. heat-treated to Rc 52-54. ALUMINUM TRIGGER - Machined aluminum trig- STOCK # PULL WT. COLOR PRICE #791-000-092AS Complete 10/22 Trigger System, ​ ger has a wide, smooth face and sits lower than the COMPETITION SEAR - Produces a lighter 3C234C99 ������������������������������������������������ $ 234.99 #100-002-145AS 1.5 lb. Black 2K199Q60 $ 214.99 factory trigger to give you better control with less pull with a smoother trigger return. Preci- TRIGGER SHOE - Trigger shoe from the Force Trigger #100-002-146AS 1.5 lb. Silver 2K189E10 $ 209.99 pressure needed for release. Includes over-travel sion ground with hand stoned engagement System is also available separately for installation on #100-002-148AS 2.5 lb. Silver 2K189A10 $ 209.99 adjustment screw (hex wrench included) and a surfaces. Includes extra power sear spring, any 10/22. Precision machined from billet aluminum, pre-drilled hole that allows easy access to adjust two .004" trigger shims. with a deeply serrated face and overtravel adjustment the sear pre-travel. SPECS: Steel, matte blue finish. Includes assem- screw. Redesigned geometry provides a camming ac- SPECS: Aluminum, anodized, black, matte finish. In- bly pin and instructions. Also fits 10/22 Magnum. cludes hex wrench, sear assembly “cheater” pin, and instructions. Color #713-123-002AS 10/22 Competition Sear, 3A22B93​ ������ $ 25.00 tion on the trigger plunger that minimizes friction and ® ® binding for a super-smooth pull. ab TIMNEY RUGER 10/22 #713-000-091AS 10/22 Trigger, 3A22C49​ ������������������������ $ 23.99 SPECS: 6061 T6 aluminum, hardcoat anodized, matte black finish. .35" COMPETITION DISCONNECTOR - De- wide face. TRIGGER MODULE COMPETITION HAMMER - Gives a lighter signed to help you get the most from the #791-000-089AS Trigger Shoe, 3C26M99​ ������������������������ $ 26.99 A Drop-In Custom Trigger Job pull with faster lock time. Precision ground Power Custom Competition Hammer and with vapor honed and hand stoned en- Sear to produce a crisp, clean, match-grade Complete, self-contained trigger gagement surfaces. Includes extra power trigger pull. Wire-EDM machined from tool assembly installs easily into your 10/22 hammer spring, two, .004" shims and trig- steel to exacting tolerances for easy, drop- CLARK CUSTOM RUGER® 10/22® to give you a nice, crisp trigger pre-set ger return spring. in fit, with precision-ground, hardened contact surfaces to ensure at 2¾ lbs. from the factory. Machined SPECS: Carbon steel, matte blue finish. Heat reliable function. Gunsmith installation recommended. DELUXE HAMMER/ from a solid billet of 6061 T6 aluminum, treated to Rc 56-58. Instructions included. SPECS: Tool steel, natural finish. the new design features a one-piece construction with an innova- DOES NOT fit 10/22 Magnum. #713-000-089AS 10/22 Competition Disc., 3A18F56​ ������ $ 19.99 TRIGGER KIT tive magazine release lever and auto bolt release to make magazine #713-123-001AS 10/22 Competition Hammer, ​ changes fast and easy. Each trigger is made in the USA, hand as- 3A34K68 ���������������������������������������������������� $ 35.99 Smooths & Lowers Pull Weight EXTRA POWER SPRING KIT - Springs provide increased functional sembled and tested for consistency and reliability. No gunsmithing reliability. Ensures con- No time-consuming fitting or stoning required to get a true necessary; simply push out the pins to drop out the old trigger, then HAMMER BUSHINGS - Machined stain- sistent hammer/sear “match-quality” trigger job on your Ruger 10/22. Kit includes drop the new trigger into the receiver and replace the pins. ab less steel bushings let you install an af- engagement; prevents matched, drop-in components: hammer, sear, sear spring, trigger, SPECS: 6061 T6 aluminum. All-Black - black housing/black trigger shoe. termarket hammer in the current-pro- hammer follow while 3 All-Silver - silver housing/silver trigger shoe. Black/Silver - black housing/ and disconnector for a clean-breaking 2 /4 to 3 pound trigger pull duction factory 10/22 trigger assembly. providing a faster lock time. Includes extra power hammer, dis- that’s adjustment for overtravel. ab silver trigger shoe. Place one on each side of the hammer to connector and operating spring, and replacement trigger return SPECS: Steel, blue, matte finish except trigger which is aluminum, black, #883-000-038AS 10/22 Trigger, All-Blk, 3H228Q73​ ����� $ 234.99 help ensure smooth function, fast lock time, and reliable ignition. spring. anodized. Fits .22LR caliber only, will not fit .22WMR. #883-000-039AS 10/22 Trigger, Blk/Silver, 3H228L73​ �� � 234.99 SPECS: Stainless steel, natural finish. Sold in pairs. SPECS: Spring steel. #181-377-100AS Hammer/Trigger Kit, 1H68L50​ ��������� $ 74.99 883-000-060AS 10/22 Trigger, All-Silver, 3H228P73​ ��� 234.99 #713-000-090AS Hammer Bushings, 3A7H50​ ��������������������� $ 7.99 #713-124-110AS 10/22 Extra Power Spring Kit, 3A7G50​ �$ 8.99

order on the web

Orders/Tech: 800-741-0015 brownells.com PAGE 151 RUGER® 10/22® BX-TRIGGER VOLQUARTSEN RUGER® POWER CUSTOM RUGER® 10/22® VOLQUARTSEN RUGER® 10/22 ® Gives A Big Improvement In 10/22 FIRING PIN TARGET TRIGGER Trigger Pull Weight TRIGGERGUARD 2000 Faster Lock Time, Designed For More Control & Better Feel Drop-in replacement trigger mod- Machined Billet Housing Drops In For Positive Ignition Machined, aluminum trigger has an improved ule provides a light, crisp trigger pull Precise, Consistent Trigger Pull shape that makes it more comfortable and con- between 2½ and 3 lbs., with minimal Redesigned impact point provides improved ignition for less chance of misfires. ab trollable for the shooter. Adjustable overtavel fea- overtravel and positive reset. A genuine CNC machined trigger housing with precision EDM trigger parts ture allows the shooter to reduce travel after let- Ruger factory part compatible with all all pre-fitted and ready to drop-in for a crisp, clean trigger pull. Hard- TITANIUM - Almost half the weight of the factory firing pin for off for improved follow-through and faster follow-up shots. Easily rifle 10/22 rifles and 22 Charger pistols. Comes in a polymer block that ened EDM sear and disconnector have tolerances held to +/- .0002". a much faster lock time, faster cycling and improved accuracy. installs in place of the factory trigger. ab holds the hammer and all the pins in place, allowing the operator to Hardened stainless steel hammer has notches surface ground to Electro-discharge machined from solid, corrosion-resistant tita- SPECS: Aluminum, matte black finish. Fits Ruger® 10/22 & 10/22 Magnum. dry fire the trigger assembly before installation. Meets or exceeds achieve the correct engagement angles, provides long-wearing nium and precision ground. Adjustment wrench and washer included. industry standards for drop testing. A quick, simple repair or upgrade performance. Reduced power hammer and sear springs lighten pull. SPECS: Titanium, 3.3" (8.6cm) long, natural finish. #930-000-137AS 10/22 Target Trigger, 3Z24H26​ ������������� $ 27.99 for your rifle. ab Trigger includes overtravel adjustment. Hardened, polished trigger #713-301-105AS 10/22 Titanium Firing Pin, 3A27I01​ ���� $ 29.99 SPECS: Polymer construction, black. 2.5 - 3.0 lb. trigger pull. Fits Ruger plunger is repositioned to depress directly to the rear as trigger is 10/22 or 22 Charger pistol. pulled; plunger spring is redesigned for better response. Oversized STEEL - Redesigned and precision ground to give a direct impact #780-001-368AS 10/22 BX-Trigger , 8G74D11​ �������������������$ 79.99 hammer, sear and action pins remove wobble that ruins a great ac- and positive ignition. Heat treated for optimum hardness and dura- ® ® tion job. Includes auto bolt release and extended magazine release. bility. Polished impact points provide reliable function. 10/22 Mag. POWER CUSTOM RUGER 10/22 Magnum model for .22WMR uses a unique, magnum hammer and fits 10/22 rifles chambered in .22 WMR only. heavier, magnum-calibrated springs; available in black, only. ab SPECS: Tool steel, 3.3" (8.6cm) long, natural finish. MATCH BOLT ® ® SPECS: Aluminum housing, anodized black or silver, matte finish. Hammer #713-000-007AS 10/22 Steel Firing Pin, 3A26J74​ ����������� $ 27.99 Engineered For Outstanding Ruger 10/22 - 440C stainless steel, hardened to Rc 58-59. Sear - A2 tool steel, Rc 60. #713-000-008AS 10/22 Mag. Steel Firing Pin, 3A27E01​ ����� 29.99 Performance; Drop-In Installation BX TRIGGER “PLUS” UPGRADE KITS #930-000-001AS .22LR Trigger, Black, 3Z220C72​ ���������� $ 224.99 #930-000-003AS .22LR Trigger, Silver, 3Z220C72​ ���������� 224.99 Match-quality bolt is a drop-in replacement that weighs less #930-000-002AS .22 Mag. Trigger, Black, 3Z220J72​ ���� 224.99 than the factory bolt to aid in reliable function with both standard- and high-velocity ammunition. Fully machined from stainless steel BX Plus 10-Rd Mag + Hunter X-22 Stock VOLQUARTSEN RUGER 10/22 with the breech face already machined to correct headspace (.044") and the rear face machined with correct firing pin protrusion (.040"). BOLT TUNE-UP KIT Rear of bolt is radiused for easy cocking. Comes with a Power Cus- ® ® tom titanium extractor claw and firing pin pre-installed and tuned. A Better Trigger Pull - And More - POWER CUSTOM RUGER 10/22 Improves Ignition & Specially heat-treated for maximum hardness and durability. Com- For A Better Shooting Experience Cycling Reliability patible with the Gen 2 CST Auto Bolt Stop (sold separately); no need TRIGGER/SEAR, HAMMER & for modified magazines when used with this bolt. ab Convenient kits all contain the Ruger® BX upgraded trigger plus Precision-engi- SPECS: Heat-treated 416 stainless steel, black oxide finish. 5.9 oz. (167 g) popular accessories to enhance your 10/22® for better performance DISCONNECTOR SHIMS neered, tool steel firing pin and extractor improve the reliability or and more shooting satisfaction. Kits include various components: wt. Comes with firing pin and extractor. Recoil spring, guide, charging your 10/22. SureStrike Firing Pin is wire-EDM cut to a precise ge- handle, and CST device not included. spare Ruger® factory magazine, the popular Magpul Hunter X-22 Helps Ensure Consistent Trigger Pull ometry that helps prevent light hits and misfires, and it’s .004" wider #713-000-159AS Power Custom 10/22 Match Bolt, ​ ergonomically-enhance, molded hard polymer stock, or a high-end than the factory pin to help eliminate side to side movement in the Trigger/Sear and Hammer shims re- 3A124H95 ������������������������������������������������ $ 124.95 E.R. Shaw target barrel. (Exact kit contents listed below.) ab bolt. Improved geometry of the Exact Edge Extractor ensures posi- r ts 10/22 p erf o r manc e pa move excess play from trigger, sear, and STOCK # BX TRIGGER PLUS... PRICE hammer. Keep engagement points uni- tive extraction and consistent ejection. Both parts are polished for smooth operation, and a replacement extractor spring is included #080-001-295AS Ruger® BX-25® 25-Rd Magazine 9Z107M99 $ 107.99 form for consistent pull weight. Hammer shims can also be used to adjust cylin- to further aid in reliable operation. ab #080-001-296AS Ruger® 10-Rd Magazine 9Z101L99 $ 101.99 ® ® der endshake on Ruger KSP 101 and Colt SPECS: A2 tool steel, hardened to Rc 56-58. Kit includes firing pin, extrac- CLARK CUSTOM RUGER 10/22 ® #080-001-297AS Ruger 10-Rd Mag + Magpul 9Z234P99 $ 234.99 Anaconda revolvers. Disconnector Shims eliminate play between tor, and extractor spring. Fits Ruger 10/22 .22 LR only. Hunter X-22 Stock (Black) trigger and disconnector. ab #930-000-128AS 10/22 Bolt Tune Up Kit, 3Z30I02​ �����������$ 33.99 SPEED BOLT RELEASE #080-001-298AS Ruger® 10-Rd Mag + Magpul 9Z234A99 $ 234.99 SPECS: 303 SS, hardened. Hammer and Trigger/Sear - 004" (.10mm) Pull Back, Release & The Bolt Slams Home Hunter X-22 Stock (Flat Dark thick. Disconnetor - .002" (.05mm) thick. 10 shims/bag. Earth) #713-122-002AS 10/22 Trigger/Sear Shims, 3A15A01​ �����$ 15.99 Does away with time consuming, clumsy, two-hand factory release. You get faster reloads, and back on tar- #080-001-301AS E.R. Shaw 18" x .920" O.D. .22 9Z179H99 $ 179.99 #713-000-068AS 10/22 Disconnector Shims, VOLQUARTSEN RUGER® 10/22® 3A15M01​ ����������������������������������������������������� 15.99 get sooner. Drop-in part requires no permanent modifications. ab LR Target Barrel (Blued) SPECS: Steel, blue, matte finish. Fits Ruger 10/22. #080-001-302AS E.R. Shaw 16½" x .920" O.D. .22 9Z179H99 $ 179.99 HIGH PERFORMANCE ACTION KIT #181-377-005AS 10/22 Speed Bolt Release, 1H9B33​ �����$ 10.99 LR Target Barrel (Blued) w/½"- Improves Trigger Pull & 28 tpi threaded muzzle Smooths Function ® ® POWER CUSTOM RUGER 10/22 Drop-in kits give match-grade ® ® trigger pull, plus adjustment for CST RUGER 10/22 HAMMER & SEAR PACKAGE overtravel; without hand fitting. ® ® GEN 2 AUTO BOLT STOP VOLQUARTSEN RUGER 10/22 Drop-In 2¾ Pound Long Rifle Kit - Tungsten disulfide DROP-IN HAMMER Trigger Job coated hammer, electroless nickel Automatically Holds The Bolt plated sear and disconnector in- Open After Last Round Is Fired Improves 10/22 Rifle Complete, easy-to-install crease smoothness and durability. kit means little to no gunsmith- Trigger plunger has improved ra- Second generation model of Trigger Pull By 50% 3 ing required for a custom, 2 /4 dius. Vibration dampening bolt stop CST’s original bolt stop gives your Superb, high-quality ham- pound trigger pull that breaks pin reduces wear on receiver and 10/22 a much sought-after func- mer reduces felt trigger pull clean and crisp. Hammer and bolt. Includes replacement hammer and trigger plunger springs. tion: locking the bolt open on the with no gunsmithing required. sear are EDM machined from Magnum Kit - Features a target-style, magnum hammer; magnum last round. The original CST device required a specially modified Geometrically advanced, mirror- long-wearing carbon steel, action calibrated, replacement hammer and trigger plunger springs. magazine, but the Gen 2 can be used with your stock factory maga- polished sear face and precision- vapor honed then fully ground and prepped so you get a light, Includes the sear and trigger parts listed above, plus magazine re- zines, even Ruger BX-25 high-capacity “banana” magazines. De- ground sear notch lighten and crisp-breaking trigger pull without the hard work. Provides faster lease. ab signed to automatically stop the forward travel of the bolt upon its full smooth the factory pull by a minimum of 50%. Electro-polishing lock time, shorter trigger travel and improved accuracy. Kit includes SPECS: Steel. Kits include aluminum trigger, steel hammer, sear, discon- retraction when the magazine is empty. Must be used in conjunction produces a velvety smooth, low micron overall exterior finish with Ron’s special springs, hammer and stainless steel sear shims that nector, trigger plunger, springs, synthetic bolt stop pin and shims for with the Power Custom Match Bolt (available separately). Compat- a higher degree of lubricity for a longer wearing, cleaner breaking, help eliminate excessive tolerances, plus a slave pin to make reas- hammer and trigger. Magnum kit includes magazine release. Installation ible with aftermarket products designed for the 10/22 trigger group, superior feeling trigger without the hard work. ab sembly even easier. DOES NOT fit 10/22 Magnum rifles. ab may require minor fitting. including extended mag latches, trigger/sear kits, and hammers.ab SPECS: Stainless steel. Sapphire honed. Rc 60-61. Includes hammer SPECS: Kit includes hammer, sear, XP hammer spring, sear disconnec- #930-122-025AS Long Rifle 10/22 Action Kit, ​ SPECS: Carbon steel, black oxide finish. Requires Power Custom Match 1 spring and trigger return spring. 1 /2" (3.8cm) long, .6 oz. (17 g) wt. Fits tor spring and trigger return spring, (2) trigger shims, (2) hammer shims, 3Z108K36 ������������������������������������������������ $ 129.99 10/22 Bolt; will not function with factory or aftermarket bolts. Ruger 10/22 only. sear slave pin and complete instructions. DOES NOT fit 10/22 Magnum. #930-122-026AS Magnum 10/22 Action Kit, ​ #713-000-160AS CST 10/22 Gen 2 Auto Bolt Stop, ​ #930-122-010AS 10/22 Drop-In Hammer, 3Z34C43​ ������ $ 35.99 #713-122-003AS Hammer Sear Package, 3A59B29​ �������� $ 61.99 3Z121N86 ������������������������������������������������ 129.99 3A64L95 �����������������������������������������������������$ 64.95

SATISFACTION GUARANTEED

PAGE 152 SINCE 1939 Office/Tech: 641-623-5401 POWER CUSTOM RUGER® 10/22® JWH Ruger® 10/22® POWER CUSTOM RUGER® 10/22® POWER CUSTOM RUGER® 10/22® EXTENDED BOLT RELEASE EXTENDED CHARGING HANDLE EXTENDED BOLT HANDLE BOLT BUFFER Easy, Fumble Free Bolt Release Faster Charging, Parkerized Chrome Reduces Receiver Battering & Cushions Felt Recoil Extended bolt release has a finger lever that Smoother Cycling 1 extends an additional /8". Lets you lock the bolt Tough polyurethane cylinder replaces the factory steel bolt stop

open using just one finger, and without fum- Extended bolt handle of lightweight titanium has a pin to cushion metal-to-metal impact and reduce receiver wear. rifle bling. A slight pull on the bolt handle and the bolt releases. Gives long, curved shape that’s easy to grab when charging or Shock-absorbing qualities help reduce felt recoil and receiver stress, fast, convenient reloads. Requires no modifications to rifle. Available clearing the chamber. Hardened, polished, drill rod spring while eliminating the annoying “clunk” sound of the bolt cycling. in Blued carbon steel or lightweight Titanium (silver finish) that’s guide includes a 4 oz. extra-power spring for faster, Easy installation instructions included. ab 1 1 ideal for competition rifles. ab smoother cycling and improved feeding with all ammuni- SPECS: Polyurethane, purple tint. Approx. 1 /4" (3.2cm) long, /4" (6.35mm) Stainless Steel Extra-Long Charging Handle Is #713-000-076AS 10/22 Extended Bolt Release, Blued Fast & Easy To Use tion types. Available with Solid or Skeletonized handle for diameter. Steel, 3A13M96​ ������������������������������������� $ 14.99 further weight reduction. ab #713-000-100AS 10/22 Bolt Buffer, 3A7I28​ ������������������������� $ 7.99 Steel charging handle simply drops in to help ease charging and SPECS: Titanium handle, steel spring guide, silver matte finish. 1¼" #713-000-005AS 10/22 Extended Bolt Release, enhance the appearance of your Ruger 10/22. Comes with handle (3.2cm) long grasping surface. 4¼" (10.8cm) long spring guide. Solid - .8 Titanium, 3A13E96​ ������������������������������� 14.99 and spring. Available with Parkerzied finish, chrome, or stainless oz. (23g) wt. Skeletonized - .6 oz. (17g) wt. steel. Parkerized and chrome charging handles feature traditional #713-301-103AS 10/22 Extended Bolt Handle, Solid, ​ ® ® 10/22 charging handle contour, but extend more than 40% farther 3A47L78 ������������������������������������������������������ $ 49.99 TACTICAL SOLUTIONS RUGER 10/22 than factory original. Stainless steel charging handle features barrel- #713-000-106AS 10/22 Extended Bolt Handle, SHOCK BUFFER VOLQUARTSEN RUGER® 10/22® style construction with texture grooves and ridges for sure grip and Skeleton/Slotted, 3A59J43​ �������������������� 61.99 unique appearance. #713-000-150AS 10/22 Extended Bolt Handle, Helps Extend Receiver Life BOLT RELEASE SPECS: Steel, Parkerized, chrome or stainless finish. 4.3" (10.9cm) long. 10/22 p erf o r manc e pa r ts Parkerized and chrome 2.2" (5.6cm) wide. Stainless steel 1.84" (4.7cm) wide. Skeleton/Holes, 3A65D38​ ���������������������� 67.99 & Reduce Felt Recoil Instant, No-Fumble Bolt Release #100-012-330AS Charging Handle, Parkerized, ​ COMPETITION BOLT HANDLE - Shock-absorbing polyurethane buffer replaces the bolt stop pin Pull back slightly on the bolt handle and the 5B22L26 ������������������������������������������������������ $ 24.95 Oversized, stainless steel bolt han- to eliminate metal-to-metal contact and extend receiver life. Cush- bolt releases. Drop-in part does away with the #100-012-329AS Charging Handle, Chrome, 5B22A26​ �� � 24.95 dle is easy to grasp for fast reloading. Drops right into ions the bolt’s rearward motion to help prevent receiver cracking, factory two-handed, push-pull, lift and let-go bolt release mecha- #100-012-331AS Charging Handle, SS, 5B22J26​ ������������ 24.95 your 10/22 LR or 10/22 Magnum—no gunsmithing required. reduce felt recoil, and enable quieter cycling. ab nism. Made from hardened, heat-treated, durable steel. Requires Kit includes a stainless steel guide rod and Wolff Extra Power SPECS: Polyurethane, orange tint. Fits 10/22 in .22 LR only. absolutely no fitting for a faster, easier to shoot 10/22. ab Bolt Spring for 10/22 LR installations. Use the factory spring #100-006-001AS 10/22® Shock Buffer, 8K4E00​ �����������������$ 4.99 SPECS: Stainless steel, matte finish, or steel, blued. Fits Ruger 10/22 only. and spring guide when installing handle on 10/22 Magnum. Includes installation instructions. Not for use with .17 rimfire conversions. ab #930-122-003AS SS 10/22 Bolt Release, 3Z9L76​ ��������� $ 11.30 FORCE PRODUCTIONS RUGER® 10/22® SPECS: Stainless steel, natural matte finish. 1¼" (3.1cm) long, .51" (1.3cm) #930-122-006AS Blue 10/22 Bolt Release, 3Z9Q76​ ����� 11.30 diameter. 1.7 oz. (48g) wt. Guide Rod - 4¼" (10.8cm) long. VOLQUARTSEN RUGER® 10/22® EXTENDED CHARGING HANDLE #713-000-075AS 10/22 Competition Bolt Handle, ​ 3A29M12 �����������������������������������������������������$ 29.99 Oversized & Deeply RECOIL BUFFER PIN Grooved For Fast Charging ® ® Prevents Bolt Battering, SUPERIOR CONCEPTS RUGER 10/22 & Cycling Receiver Damage CHARGING HANDLE Machined stainless steel VOLQUARTSEN RUGER® 10/22® Drop-in, clear plastic, bolt stop pin cushions the metal to metal charging handle has deep Oversized Handle For contact between bolt and receiver. Prevents cracked and battered grooves that make it easy to COMPETITION BOLT ASSEMBLY receivers, eliminates the metallic clank of bolt hitting receiver for Faster Charging grasp for lightning-quick charging and jam clearance. No fumbling quieter operation. ab to find the handle—you can’t miss it. Hardened carbon steel guide Complete, Fully Assembled & Oversized, bolt handle SPECS: Clear plastic. Fits Ruger 10/22 long rifle and 10/22 magnum rifles. pin provides exceptional strength for smooth cycling and improved is easy to grasp and pro- Ready-To-Shoot #930-010-000AS Recoil Buffer Pin, 3Z9F55​ ���������������������� $ 10.99 feeding without bending or flexing. Comes fully assembled with vides fast, positive charg- handle, guide pin, and extra power spring. Drop-in installation. ab Ready to drop in bolt assembly, ing or clearing. Steel drill 15 7 SPECS: Handle - 303 stainless steel. /16" (2.4cm) long x /16" (1.1cm) diam- machined to strict tolerances, im- rod with high quality spring eter. Guide Pin - Hardened carbon steel. proves reliability and accuracy. Case for smooth cycling and improved feeding with all ammunition types. ® ® #791-000-088AS Extended Charging Hdl., 3C31L99​ �������$ 31.99 hardened to prevent cracking, with extra smooth bearing surfaces DOUG KOENIG RUGER 10/22 Precision machined from high quality steel to provide the correct for reliable cycling. Unique, round, titanium firing pin, encased in the weight and balance for reliable, trouble-free operation. Drop in fit, bolt to prevent binding and misfires, plus helps decrease locktime. V-BLOCK no gunsmithing required. ab EDM machined, hardened extractor ensures positive extraction. SPECS: Steel, blue (BL), or stainless steel (SS) natural finish. Handle - 1" Features easily interchangeable bolt handle. Includes recoil spring Solid Steel, Won’t Break 11 7 (2.5cm) long x /16" (1.7cm) diameter. Guide Rod – 3 /8" (9.8cm) long. In- ® ® and rod for easier installation. ab Provides a tighter barrel/receiver lockup cludes fully assembled bolt handle, recoil rod, spring, and instructions. POWER CUSTOM RUGER 10/22 SPECS: 12L14 steel. Silver. Case hardened. Fully assembled. for improved accuracy. Holds barrel firmly in #100-003-562AS BL Charging Handle, 9B34E38​ ��������� $ 39.99 #930-000-016AS Competition 10/22 Bolt, 3Z210Q12​ �� � $ 229.99 position, won’t shoot loose or break when #100-003-563AS SS Charging Handle, 9B38N26​ ��������� 44.99 .17 RIMFIRE HEAVY BOLT HANDLE torquing into place. Replaces factory block with no modification to gun or stock. ab Smoother Cycling & SPECS: O-1 steel, in-the-white. .880" (22.4mm) long, .5" (12.7mm) wide. Improved Reliability For #388-122-001AS 10/22 V-Block, 8H17M36​ ���������������������� $ 20.99 Converted 10/22 Rifles TUFFER BUFFER RUGER® 10/22® VOLQUARTSEN RUGER® 10/22® Dense, tungsten core provides the added weight re- BOLT BUFFER EXTENDED BOLT HANDLE quired to slow bolt speed for safe and reliable function of higher pressure, .17 rimfire cartridges in converted 10/22 Replaces Bolt Stop Pin & Prevents TACTICAL SOLUTIONS RUGER® 10/22® Fast, Easy Operation; rifles. Keeps bolt closed longer to prevent case ruptures, Excessive Wear Hardened For extractor blowout, and cracked receivers, and is a mandatory part V-BLOCK Durability when using the factory .22 rimfire bolt for your conversion. Over- Durable, abrasion resistant bolt buf- sized handle is easy to locate and grasp in the field or during fast fer prevents contact between the bolt Ensures A Tight Barrel-To-Receiver Fit For Improved Accuracy Extended, carbon paced competition. Precision machined, stainless steel, bolt handle and stop pin to eliminate battering. Acts 1 steel bolt handle is /4" body resists rust and corrosion. Included stainless steel guide rod like a shock absorber to provide smooth, Machined stainless steel replacement for longer than the factory part, making it fast and easy to grasp. Carbon and Wolff Extra Power bolt spring must be used in .17 Mach 2 con- quiet cycling without the metal-to-metal factory part eliminates the problem of barrel steel, recoil rod is polished, hardened, then coated with a proprietary versions; use the factory spring and guide rod when installing bolt contact that so easily damages the bolt stop pin holes. Replaces bolt “droop” caused by the 10/22’s slip in barrel de- finish to reduce friction and build-up of fouling. Recoil rod spring is handle on 10/22 Magnum rifles converted to .17 HMR. ab stop pin at rear of receiver. Polyurethane construction is resistant sign. Maintains steady pressure to ensure a tight barrel-to-receiver cryogenically treated for improved stability and longer service life. SPECS: Stainless steel body with tungsten core, natural, matte finish. to most solvents. fit for improved accuracy. Replaces factory block without modifica- Drops-in without fitting. ab Handle - 1" (2.5cm) long, .75" (1.9cm) diameter. 3.1 oz. (87g) weight. Guide SPECS: Polyurethane, blue tint. Fits 10/22 .22 LR only. tion to gun or stock; uses the existing screws. ab 1 SPECS: Carbon steel, matte finish. Fits Ruger 10/22. Rod - 4 /4" (10.8cm) long. #100-003-804AS Bolt Buffer, each, 6B9A32​ �����������������������$ 12.99 SPECS: Stainless steel. .880" (22.4mm) long, .56" (14mm) wide. #930-000-040AS Extended Bolt Handle, 3Z36G49​ ��������� $ 37.99 #713-000-074AS .17 RF Heavy Bolt Handle, 3A53F48​ ���� $ 55.99 #100-003-805AS Bolt Buffer, 3-pak, 6B17G43​ ������������������� 27.99 #100-005-998AS V-Block, 8K19B82​ �������������������������������������$ 21.99

order on the web

Orders/Tech: 800-741-0015 brownells.com PAGE 153 POWER CUSTOM RUGER® 10/22® MIDWEST INDUSTRIES RUGER® SR-22™ AK-BUILDER AK-47/AKM AK BUILDER AK-47/-74 RECEIVER FLATS COMPETITION BARREL V-BLOCK HANDGUARD ACCESSORY RAILS RIVETS, PINS & PLATES Eliminates Barrel Sag Bolt-On System For High-Quality Parts Make Your AK Build Easier & More Accurate Custom Accessory Replacement block eliminates barrel sag Newly-manufactured parts eliminate the struggle of trying to common to the 10/22 slip-in design. Machined Mounting Options build a reliable gun with worn out, used Eastern Bloc parts. These from 416 stainless steel, and then hardened Machined aluminum high quality rivets, pins and reinforcement plates are just what you to RC-28, the V-block helps maintain steady Picatinny-slot acces- need to successfully complete your AK Rifle build. ab pressure for a tight barrel-to-receiver fit and sory rails bolt to the SR- rifle improved accuracy. V-Block Barrel Screw Kit AKM FIXED STOCK RIVET SET - Precision Stamped Steel Ready To Bend & Build 22 factory handguard Every rivet you need to complete a features two stainless steel Allen screws and to provide expanded 5 fixed stock AKM rifle. The AKM is the includes a /32" Allen wrench. ab Precision-cut, ready-to-bend steel flats save time and frustra- versatility in mounting most common sheet metal receiver SPECS: V-Block - 416 stainless steel. Screw Kit – Stainless steel screws. sights, lights, vertical grips, and other tactical accessories. Easy, no- tion when building a custom AK. No more trying to salvage a beat- 5 variant of the AK-47. Hardened steel /32" Allen wrench. up receiver from a “donor” gun. These flats are stamped from the drill, no-tap installation using the included hex head screws and rivets with the correct swell necks #713-000-172AS Barrel V-Block, 3A16G66​ �����������������������$ 19.99 the mounting holes already in the handguard. Top Rail attaches to correct 1mm thick sheet steel, with top rails pre-bent, stepped, and provide the tightest fit in the coun- trimmed on CNC equipment. Hammer and trigger holes are slightly #713-000-171AS V-Block Barrel Screws, 3A11P69​ ����������� 12.99 the top of the handguard, and is the same height as the receiver tersunk holes in the trunnions. undersized, ready for precise final reaming after bending; use 7mm rail for aligning front and rear backup sights or installing a forward- 63 SPECS: Steel, black oxide finish. Fits AKM, Hungarian AMD /65, and Ro- and 5mm chucking reamers. All flats come with lower bolt guide mounted optic. Side/Bottom Rail mounts to the side or bottom of manian w/fixed/underfold/sidefold stock. the handguard. ab rails that include magazine stabilizers on both rails and the hammer SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Includes #100-006-776AS AKM Fixed Stock Rivet Set, 4K7H08​ ������ $ 8.99 spacing bump that centers the hammer in the correct position. Rails 3 require drilling for center support holes after spot welding. Refer to PRO MAG RUGER® 10/22® mounting hardware and Allen Wrench. Top Rail – 9" (22.8cm) long, /4" 3 1 AK PISTON RIVET - Correctly dimensioned the listing below and choose the correct flat for your project. See our high. 4.1 oz. (116g) wt. Side/Bottom Rail – 2 /4" (7cm) long, /2" high. 1 gas piston rivet that must be used to gain the oz. (28.3g) wt. Specialty Rifle Tools section for the AK Builder Receiver Flat Bending TACTICAL BARREL BAND proper amount of “wiggle” when replacing Die Set, plus other jigs and tools that aid in custom AK work. ab #100-005-605AS SR-22 HG Top Rail, 2A39E99​ �����������������$ 39.99 Two Rails & Sling Slot Expand Accessory the gas piston with a U.S.-made conforming part. .3mm diameter SPECS: Annealed 4130 steel, in-the-white. 1mm (.040") thick. Includes #100-005-606AS SR-22 HG Side/Bottom Rail, 2A18J99​ ��� 18.99 with tapered head. instructions. Mounting Options SPECS: Steel, black oxide finish. Machined aluminum replacement for the fac- #100-006-756AS AK Piston Rivet, 4K0H49​ �������������������������� $ .99 STANDARD AK-47 7.62x39 - For building a standard, fixed-stock AK-47/AKM in 7.62x39. Use with the Romanian and most common tory barrel band on a 10/22 carbine offers an inte- 1 gral sling loop and two Weaver-style accessory rails. Accepts slings AK BARREL PINS - Hardened steel barrel variant kits. /8" alignment pin holes are pre-drilled. Available with or 1 without front and rear trunnion holes pre-punched. up to 1 /4" wide, and reversible design lets you install it with the sling AK-BUILDER AK-47/74 pins ready for press fit installation. Precision loop on either side of the rifle. One-slot side rail and a two-slot bot- machinced from tool steel then heat-treated #100-006-761AS AK-47 Fixed Stock Flat, w/o T-Holes, ​ tom rail let you mount lights, lasers, or other items. Won’t interfere TRIGGERGUARD & MAGAZINE CATCH to the correct original specs. AK-47 Barrel Pin - 4K19H99 �����������������������������������������������������$ 19.99 Made to Romanian barrel pin dimensions; 7mm diameter, 28.5mm with factory front sight. Puts An End To Loose Fitting #100-006-764AS AK-47 Fixed Stock Flat, w/T-Holes, ​ 1 SPECS: 6061 T6 aluminum, hardcoat anodized, black. 1 /4" (3.2cm) long, long. Oversized .302" Barrel Pin - Width is the same as the original 4K21G08 ����������������������������������������������������� 21.99 1 Magazines 2" (5cm) wide, 2 /4" (5.7cm) high. 1.3 oz. (37g) weight. Romanian pins but slightly oversize to correct slightly out of spec #687-000-031AS Tactical Barrel Band, 7H28J11​ �������������� $ 29.99 Newly manufactured triggerguard barrel trunnion pin holes. Oversized 8mm Barrel Pin - 8mm or AK-47 POLISH UNDERFOLDER - For building a Polish AK-47 in without the magazine catch pin hole. 1mm larger in diameter with the width of the original Romanian. 7.62x39mm with AN underfolding stock. Do not use with Yugo r ts 10/22 p erf o r manc e pa Allows individual fitting of the magazine Will correct highly worn or miss-drilled barrel trunnions. Use 7mm M70/M92, Hungarian AMMS, or Romanian underfolder rear trun- drill to open the pin hole then ream with a .300" chucking reamer 1 catch. Corrects the dimension stacking nion. /8" alignment pin holes are pre-drilled. to gain the correct diameter for a secure press fit. problem on out-of-spec receivers that #100-006-758AS AK-47 Polish Underfolder Flat, ​ SUPERIOR CONCEPTS RUGER® 10/22® causes loose fitting magazines that #100-006-773AS AK-47 7mm Barrel Pin, 4K4H90​ �������������$ 5.99 4K32P60 ���������������������������������������������������� $ 34.99 rattle and won’t feed properly. ab #100-006-775AS Oversized 7.67mm Barrel Pin, 4K4B51​ �� � 4.99 ACCESSORY BAND SPECS: 4130 steel, black oxide finish. 3.38"(8.5cm) long, .465"(11mm) #100-006-774AS Oversized 8mm Barrel Pin, 4K4I51​ ��������� 4.99 AK-74 5.45x39 - For standard, fixed-stock AK-74. Use with Bulgar- wide. Includes instructions. 1 Easy Installation, Provides 3-Rails For ian and the most common variant 5.45x 39mm kits. /8" alignment #100-006-777AS AK47 Triggerguard, 4K10A54​ ���������������� $ 11.99 HAMMER/TRIGGER AXIS PIN - Extended length pin holes are pre-drilled. Mounting Lights, Lasers & Slings shaft fits AK‑47 receivers up to 1.390" (3.53cm) #100-006-760AS AK-74 Fixed Stock Flat, 4K23E18​ �������� $ 24.99 MAGAZINE CATCH - Direct replacement for origi- wide. Underside of retaining head is tapered to Reinforced nylon composite barrel band nal factory part. Crisp edges engage all types of provide an exact fit and still allow easy removal. with integral Picatinny rails is perfect for mount- magazines for reliable magazine retention. Turned from tool steel for outstanding wear re- AK-74 BULGARIAN SIDEFOLDER - Made specifically for the Bul- ing flashlights, lasers, sling bases, and other ac- SPECS: Stamped steel, black oxide finish. .200" (5.1mm) sistance. Sold individually; assembly requires two pins. garian side folding stocks. Use with the most common variant kits. cessories without modifying the stock. Features 1 diameter hole. Fits all AK-47 and AK-74. SPECS: Tool steel, hardened to Rc 50-52, black oxide finish. 1.44"(3.6cm) /8" alignment pin holes are pre-drilled. a two-slot bottom rail and two, single-slot side rails for additional long, 1.19" shaft length, .19" (4.9mm) diameter. #100-006-778AS Bulgarian Sidefolder Flat, 4K32P60​ ���� $ 34.99 accessories. One-piece design replaces factory original; clamps #100-006-766AS AK-47 Magazine Catch, 4K8I71​ �������������� $ 9.99

R TS -47 PA tight with included Allen head cross-bolt. Includes Allen wrench. ab #100-006-444AS Hammer/Trigger Pin, 4K3K04​ ���������������� $ 3.49 1 7 MAGAZINE CATCH PIVOT PIN - Manufactured to maximum O.D. HUNGARIAN AMD 65 - Specifically cut and stamped to accom- SPECS: Glass-filled nylon composite, black. 1 /4" (3.2cm) long, 1 /8" (4.8cm) a k 3 to provide a tight-fitting magazine catch. Convex ends help it drive modate the sidefolding stock trunnion of this popular 7.62x39mm wide, 2 /8" (6cm) high. .9 oz. (26g) weight. Fits factory-taper barrel. Does POLISH UNDERFOLDER REINFORCEMENT PLATE - Welds to the and center easily. ab not fit 10/22 Magnum. receiver’s lower section directly over the pistol AK variant. Rails are not heat-treated. Holes on the bottom for SPECS: Hardened steel. .700" (17.7mm) long, .194"(4.9mm) dia. Fits all grip mounting hole. Reinforces the area when the stock push button and stock pivot pin are undersized and will #100-005-243AS 3-Rail Picatinny Accessory Band, ​ AK-47 and AK-74. you are installing a folding stock. Only required need to be reamed. 9B27Q20 ���������������������������������������������������� $ 29.99 #100-006-768AS AK-47 Magazine Catch Pivot Pin, ​ on the Yugo receivers when you’re not using #100-006-759AS Gas Piston Drilling Fixture, 4K32J60​ ��� $ 34.99 4K2H85 �������������������������������������������������������� $ 3.49 the original pistol grip. SPECS: Stamped sheet steel. 2mm thick. YUGO M92 UNDERFOLDER - Stamped specifically for use with MAGAZINE CATCH SPRING - Replaces worn or weak magazine #100-006-762AS Polish Underfolder Replacement Plate, ​ the Yugoslavian Zastava M92 and M70 variants (7.62x 39) with un- TAPCO AK-47 catch springs. Always a good policy to replace the spring whenever 4K8L16 �����������������������������������������������������������$ 9.99 derfolder stocks. Requires flat-sided front trunnion; do not use the you replace or work on the mag catch itself. ab bulged RPK-style trunnion. Finish work requires a 4mm chucking GRIP SCREW & BUSHING SPECS: Heat-treated spring steel wire. Fits all AK-47 and AK-74. AK SELECTOR STOP - Installs between the reamer to open up the trunnion holes. #100-006-769AS AK-47 Magazine Catch Spring, forward triggerguard plate and the receiver. Better-Than-Factory #100-006-763AS Yugo M92 Underfolder Receiver Flat, ​ 4K2I04​ ���������������������������������������������������������� $ 2.49 Provides a positive stop to the selector switch. 4K32I60 ����������������������������������������������������� $ 34.99 Replacement Parts SPECS: 4130 chromoly steel, black oxide finish. Fits receivers drilled with four triggerguard holes. Steel grip screw and bushing are direct replacements for the #100-006-767AS AK Selector Stop, 4K6M18​ ����������������������� $ 7.99 original pistol grip parts. Precisely formed and threaded with Amer- ican quality control, sometimes lacking in foreign factories, for CENTER SUPPORT & RIVET FOR 1mm proper fit and function. Makes sense to replace these parts when RECEIVERS - Beefed up support prevents room” shape after peening. Support is turned from steel, center installing a new grip. Bushing is stamped “TAPCO USA”. ab receiver “crush” during peening on 1mm drilled to the correct diameter, then hardened to Rc 50-52 for far SPECS: Carbon steel, black oxide finish. 4" (10.1cm) long. Slotted head, receiver flats. Rivet is made slightly longer better strength than the flimsy factory part made of steel tubing. M6 x 1mm threads. brownells.com/dream then the original length to provide ad- SPECS: High-carbon steel, hardened to Rc 50-52. #100-006-316AS AK-47 Grip Screw & Bushing, 5A7H13​ ��� $ 7.99 equate peen over and the correct “mush- #100-006-441AS Center Support, 4K5J38​ �������������������������� $ 6.99

SATISFACTION GUARANTEED

PAGE 154 SINCE 1939 Office/Tech: 641-623-5401 PW ARMS AK-47/74 BATTLECOMP ENTERPRISES AK-47 ECHO NINE THREE AK-47/74 DEFIANCE MACHINING RECEIVER BLANKS BATTLECOMP AMBIDEXTROUS SLING ATTACHMENT REMINGTON 700 STYLE ACTIONS Fully-Shaped Blanks For Multi-Mode Compensator Reduces Easy Single-Point Sling Attachment Precision-Machined Custom Kalashnikov Build Muzzle Climb & Suppresses Flash For Your Kalashnikov Actions For Custom Rifle Builds Designed specifically to help you maximized the performance of

In-the-white steel receiver blanks are formed to final shape, but Simple, rugged stamped-steel sling rifle not heat treated. Blanks have upper bolt guide rails, but no receiver your AK, this multi-purpose compensator reduces muzzle climb, so loop quickly installs under AK pistol grip to Machined 416 stain- Stryker Ridge rails. Made in Poland, blanks are available for AKM/AKS 7.62X39 or you stay on target between shots during rapid fire engagements. Re- increase your rifle’s sling options. Gives ambidextrous sling attach- less steel actions accept Tantal/AK-74 5.45X39. Include cuts for pistol grip attachment, trig- duces flash signature and produces less concussion than the standard ment for most stamped receivers. Fits fixed and folding stocks, in- most Remington 700 parts, ger and magazine well, with reinforcing dimples stamped into sides. AK flash hider for a smaller dust signature when shooting prone. ab cluding underfolders. Extends to rear, parallel with stock, over firing stocks, barrels and acces- No holes cut for trigger, hammer pins, selector or trunnion. Steel is SPECS: Machined 17-4 PH stainless steel with MIL-DTL 13924D Class IV hand. Rounded contours resist snagging on clothing or gear. ab sories, and help you build 1mm thick. No FFL required. black oxide finish. 2.6" (6.6cm) OAL x .900" (22.9mm) O.D. Fits AK-47/AKM SPECS: Stamped steel, Parkerized, matte black. 4.1" (10.4cm) long. 1.1" a custom bolt-action rifle. 5 SPECS: Stamped steel, unfinished. 10¼" ( 26cm) long. 1 /16" ( 3.2cm) wide. pattern rifles chambered in 7.62 x 39mm with 14 x 1 LH muzzle threads. (2.7cm) wide. 2.2 oz (62g) wt. Manufactured to very precise 1mm thick. 8 o.z. (226g ) wt. AK-47 mag well 26mm wide. AK-74 mag well Pre-notched for the 12 o’clock pin. Spring washers included. #100-008-778AS AK Amb. Sling Loop, 1D21M74​ ��������������$ 23.95 tolerances, these actions fea- 24mm wide. Not a finished receiver. #100-009-349AS AK-47 Battlecomp, 3G182J79​ ����������� $ 189.99 ture one-piece 4340 bolts, #100-010-928AS AK-47 Receiver Blank, 3Z24P39​ ���������� $ 26.99 M16-style extractors and Wire Deviant #100-010-929AS AK-74 Receiver Blank, 3Z24Q02​ ���������� 26.99 EDM-cut full-length lug ways for smooth operation and su- Items MAGPUL AK-47/74 SURGEON RIFLES perior strength and rigidty. All MOE® AK/AK+ GRIPS receivers are cut to accept KREBS AK-47/74 TACTICAL SHORT ACTION detachable magazines or BDL- Comfortable Shape & style magazines, with the 338 Magnum Long Action taking detach- RECEIVER & BOLT ASSEMBLY able magazines only. Stryker Ridge has a standard Remington 700 MK-VI ENHANCED SAFETY Anti-Slip Surface Enhance profile and is drilled and tapped for mounts and bases that use 8-40 Operate Your Kalashnikov’s Safety Weapon Control Rugged, Remington-Style screws. Deviant model adds an integral 20 MOA Picatinny rail, a threaded bolt handle that lets you change knobs, and custom spiral While Maintaining A Firing Grip Magpul Original Equip- Bolt Action For Building fluting on the bolt. FFL required for purchase. ab ment grip delivers the same Precision Rifles SPECS: 416 Stainless Steel. Short Action - .480" bolt face. Long Magnum Stamped steel safety lever features ergonomic benefits as the Complete short action re- Action - .545" bolt face. 338 Magnum Long Action - .595" bolt face. a finger shelf that helps you flip safety on or off without moving your AR-15 MOE version, with mi- firing hand off the pistol grip. Includes bolt hold-open notch that ceiver and bolt assembly give the reliability and smoothness of #100-012-647AS Stryker Ridge SA Rec’r, 4Z1060I90​ �� � $ 1099.00 nor adaptations for AK platforms. Like the AR line, this one-piece the classic Remington 700 action combined with innovative fea- lets you lock bolt to the rear. Fits standard AK-47 and AK-74 rifles. polymer upgrade easily replaces a standard factory pistol grip and #100-012-648AS Stryker Ridge Magnum LA Rec’r, ​ Front tension detent located for standard AK, not Saiga pattern rifles. tures designed specifically for police, military, and civilian precision is designed to fill the natural contours of your hand for a comfort- shooters. Machined, not forged, from 4340 carbon steel billet, with 4Z1060J90 �������������������������������������������� 1099.00 Matte black painted finish matches most Kalashnikovs. Heat treated able, solid grasp and stabilized shots. Removable black polymer cap to Rc50 to withstand hard use. ab bolt machined from a separate piece of 4140 billet to exceptionally #100-012-649AS Stryker Ridge .338 Magnum LA in bottom reveals internal storage compartment for small items; tight tolerances from steel billet for precise dimensions and superb Rec’r, 4Z1060A90​ �������������������������������� 1099.00 SPECS: Stamped 1050 steel, matte black finish. 4½" (11.4cm) long, 1¼" accepts Magpul AR-15 MIAD® Grip Cores, sold separately. AK grips (3.2cm) high, .04" (1mm) thick. 1.2 oz. (33g) wt. strength. All components are heat-treated for hardness before final #100-012-650AS Deviant SA Rec’r, 4Z1460J00​ ���������� 1460.00 have aggressive crackle texturing on the sides and deep horizontal surface machining to prevent unwanted stress or warpage. Race- #497-000-011AS MK-VI Enhanced Safety, 7D52Q52​ ������ $ 58.99 serrations on the front and rear straps help you maintain excellent #100-012-651AS Deviant .338 Magnum LA Rec’r, ​ ways are EDM-cut to be perfectly square with the receiver face, 4Z1620A00 �������������������������������������������� 1620.00 traction in any environment. AK+ grips are overmolded with non-slip threads, and bolt locking lug surfaces. A rail in the left raceway synthetic rubber to give you an exceptionally firm purchase on the eliminates misfeeds caused by a shell getting stuck in the raceway, grip for more positive control. Lube Bottle Grip Core snaps securely 1 and the extended ejection port ensures plenty of clearance for fired TAPCO AK-47 the cavity in the underside of the grip and holds /2 fl. oz. of your cases. Full-length, 20 M.O.A. MIL-STD 1913 Picatinny rail milled into favorite gun oil or CLP. Sold separately. ab the receiver top offers exceptional scope mounting flexibility and PRO MAG RUGER® 10/22® TRIGGER GROUP RETAINING PLATE SPECS: Reinforced molded polymer, Black, Flat Dark Earth (FDE), O.D. maintains perfect alignment with the action centerline and bar- Green (ODG), Stealth Gray, and Plum. 4.13" (10.49cm) maximum length, rel tenon threads, because it can’t work loose under recoil or get ARCHANGEL ARS CONVERSION PACKAGE Makes Installation & Removal Of 2.1" (5.3cm) wide at base, 1.21" (3.07cm) maximum thickness. 2.86 oz. 1 misaligned by impact. Hefty, /4" thick recoil lug machined into the Trigger Components Easy (81.08g) wt. w/hardware. Compatible with milled and stamped AK-47/ underside helps spread recoil force over a larger area than standard AKM receivers, reinforced and non-reinforced receivers, underfolders,

lugs to stabilize the action for better accuracy. Bolt is machined in a k Drop-in steel plate helps keep trig- and all common grip nuts. Mounting screw included. Depending on re- ger group pins in place for ease in removing or installing the fire a single operation from a single piece of steel, so the bolt handle,

ceiver tolerance, may require some fitting. -47 pa r ts control components. Locks the hammer and trigger pivot pins in .308 (.473" diameter) breech face, extraction cam, and locking lugs position to speed reassembly after cleaning or service; after instal- #100-011-612AS MOE AK Grip, Black, 3K17P35​ �������������� $ 19.90 are in perfect alignment with the bolt exterior. Bolt maintains a .007" lation, plate is conveniently retained by the selector. Fits nearly all #100-011-613AS MOE AK Grip, FDE, 3K17L35​ ������������������ 19.90 clearance out of battery, with .004" clearance (.002" per side) when closed. Low-profile, streamlined bolt shroud saves weight and looks AK variants, including the Tantal, and requires no permanent altera- #100-011-614AS MOE AK Grip, ODG, 3K17F35​ ���������������� 19.90 Gives Your 10/22 The Look Of An Advanced Tactical Rifle tions to the rifle. Installation tab at the top helps position the plate in good. Screw-on tactical bolt knob can be replaced with Surgeon #100-011-615AS MOE AK Grip, Gray, 3K16E26​ ���������������� 19.90 5 brand or aftermarket knobs that have /16"-24 tpi threads. Fits stocks the right place and provides a grasping surface for removing it. ab 100-019-349AS MOE AK Grip, Plum, 3K15J33​ ���������������� 19.90 Drop-in conversion kit gives your 10/22 an aggressive tactical SPECS: Steel, military-grade phosphate finish, matte black. Instructions inletted for the Remington 700, and accepts triggers, bottom metal, rifle appearance and greatly expanded accessory mounting versatil- included. #100-016-416AS MOE AK+ Grip, Black, 3K20C66​ ���������� 23.70 and magazines compatible with the 700 for plenty of customizing ity. Accepts a wide variety of accessories designed for the AR-15/ #100-004-718AS AK-47 Retaining Plate, 5A5N40​ �������������$ 5.99 #100-016-417AS MOE AK+ Grip, FDE, 3K20L66​ �������������� 23.70 options. Extractor, ejector, firing pin, bolt shroud, and safety button M16 platform. Simply remove the barreled action from the factory #100-016-419AS MOE AK+ Grip, ODG, 3K20H66​ ������������ 23.70 are interchangeable with standard Remington 700 parts. ab stock and drop it into the Advanced Rimfire System’s lower receiver SPECS: 4340/4140 carbon steel, in-the-white, or 17-4 stainless steel, housing/pistol grip/buttstock unit. Upper receiver housing has Pica- #100-016-418AS MOE AK+ Grip, Gray, 3K20N66​ ������������ 23.70 natural silver finish. Includes receiver, bolt, bolt knob, bolt stop, bolt stop 100-016-543AS Lube Bottle Grip Core, 3K10I83​ ���������� 14.20 tinny rail that accepts popular tactical optics. Free-float handguard pin, bolt stop spring, ejector, ejector spring, ejector pin, extractor, firing has plenty of cooling vents to keep the barrel from overheating, plus YANKEE HILL MACHINE AK-47 pin, and trigger pins. FFL required for purchase. top and bottom Picatinny rails. Top rail is same height as receiver rail, PHANTOM AK FLASH HIDER #100-003-660AS Tactical Short Action Receiver & providing 15" of uninterrupted rail space. Adjustable, six-position COONAN FAL Bolt, 3F1499C99​ ���������������������������������� $ 1499.99 buttstock replicates the feel and functionality of USGI M4 carbine Drastically Reduces Flash Signature stock; has two receptacles for single-point pushbutton slings. Ergo ACTION WRENCH - Specifically designed to TYPE III METRIC RECEIVER pistol grip has molded-in finger grooves. ab re Brings the proven Phantom de- prevent damage to Surgeon receiver caused SPECS: Reinforced, molded high-impact polymer, Desert Tan. Fits Ruger sign, popular with AR-15 shooters, to Accepts Metric Parts by torquing force of installing and removing 10/22 barreled action with standard barrel. Mounting hardware and com- c eiver s & C H ASS I S provide highly effective reduction of For Rifle Build barrel. Lets you torque the action as close as plete instructions included. your Kalashnikov’s muzzle flash. Fits possible to the barrel threads to eliminate unwanted twisting or #687-000-064AS 10/22 ARS Conversion Pack, Desert any AK-47 with the standard 14mm x 1 left-hand threads. Features Steel receiver accepts bowing of the receiver that can result in distorted bolt raceways Tan, 7H115F18​ ���������������������������������������� $ 122.99 an aggressive “saw tooth” front end and five straight vents for uni- standard metric pattern and other expensive damage. Inserts in the ejection port; the two 1 form expulsion of gasses. Installs easily without requiring any kind parts and features installed ejector block for easy FAL builds. In- “ears” fit in the raceways at the front ring. Insert a /2" drive ratchet of crush or peel washer. ab vestment cast receivers are CNC machine finished to exacting toler- handle or torque wrench and tighten/loosen the action to the bar- SPECS: Steel, black phosphate finish. 14mm x 1 left-hand threads. Instruc- ances for precise fit. Receiver has carry handle cut. ab rel. Also works on any length Remington 700 receiver. tions included. SPECS: Investment cast steel, matte black finish. Requires FFL for purchase. SPECS: Steel, black oxide finish. Fits Surgeon Rifles and Remington 700 receivers. #100-009-649AS Phantom AK Flsh Hider, 9A24J43​ �������� $ 28.50 #100-014-945AS Type III Metric FAL Rec'r, 8E299I99​ ��� $ 299.99 #100-003-675AS Surgeon Action Wrench, 9B71G44​ ������ $ 79.99 ASK ABOUT OVERNIGHT DELIVERY!

order on the web

Orders/Tech: 800-741-0015 brownells.com PAGE 155 REMINGTON 700 RECEIVERS ACCURACY INTERNATIONAL Item ACCURACY INTERNATIONAL KINETIC RESEARCH GROUP Remington 700 REMINGTON 700 Factory Original, REMINGTON 700 AICS AT CHASSIS X-Ray Chassis Current Production, AX 2.0 FOLDING CHASSIS Legendary Performance - Short & Long Actions A Drop-In Accurizing Job Plus A Available Detachable Magazine Conversion Easy “Bolt-In” Installation Gives You Popular Tactical Features We are so pleased to be able Modular chassis system combined with a Remington 700 short rifle & Accuracy Of A Custom Bedding Job to offer the legendary Remington action produces a exceptionally precise-shooting rifle at an with an economical price tag. The Remington 700 action is a “drop in” fit 700 action in our catalog through a The Accuracy International Chassis System (AICS) provides a Folding Tactical Stock Gives Your Rifle Advanced Long-Range special arrangement with the Rem- with no gunsmithing and no bedding required. The X-Ray is made rigid, weatherproof platform for a highly versatile, accurate long- Features - No Gunsmithing Installation of aluminum and reinforced polymer, which produces a chas- ington factory. We have current- range rifle built around the Remington 700 action. It requires no production Long and Short 700 ac- Polymer and aluminum stock system gives your Remington 700 sis that is extremely light yet offers adjustable ergonomics and an specialized gunsmithing or stock bedding. Two bolts secure the aluminum “V” bedding system for premium accuracy. Checkpiece tions that meet the latest Remington action to a full-length, self-aligning, self-bedding aluminum “V” greater tactical flexibility than traditional stocks. Based on advanced sniper rifles, this full-length aluminum chassis provides a solid plat- height, checkpiece position, recoil pad height, and length of pull factory design specifications and quality control standards. Each block that gives the stability and accuracy benefits of traditional 3 form for increased accuracy potential and zero retention. Two bolts are all customizable. Comes with three /8" spacers that add up to action comes drilled and tapped for scope bases, and it's ready to fiberglass bedding. Large, recoil absorbing buttpad has a non-slip 1 secure the action to a full-length, self-aligning, self-bedding alu- 1 /8" to the length of pull. Between the supplied spacers and the accept custom barrel, bottom metal, and other components (all surface and includes .4" (10mm) and .8" (20mm) wide spacers to 3 optional LOP Spacer Set (of 3 more /8" spacers), the length of pull available separately from Brownells). Fitted with Remington’s state- customize the length of pull. Adjustable cheekpiece moves vertical- minum “V” block that eliminates the need for traditional fiberglass ™ can be adjusted from 12.8" to 15". The X-Ray uses readily-available of-the-art X-Mark Pro Trigger for an outstanding trigger pull and ly and horizontally for an optimum cheek weld when using scopes bedding. No specialized gunsmithing required. Cheekpiece adjusts easy adjustment. Remington’s famously smooth-cycling bolt as- vertically and horizontally for precise eye alignment with scopes and AICS magazines (sold separately), and will accept all but the heaviest or night vision optics. Ergonomically advanced pistol grip provides straight-cylinder barrels. Most aftermarket recoil lugs and triggers sembly features two, up-front bolt lugs for tight lockup and reli- the shooter with a straight trigger pull and enhanced control. Stock night vision devices. Rubber recoil pad with bolt on spacers between able pressure retention, plus traditional 2-panel checkering on the the pad and stock let you customize the length of pull. Folding butt- for the Rem 700 will also fit. Accepts Remington 700 short action boasts six flush cup sling points for quick sling positioning and Key- (right hand), only. 3.1 lb. wt. ab bolt handle. The recessed bolt face encloses the cartridge head in Slot™ accessory mounting system on the bottom of the forend. stock reduces the stock’s overall length by 8" for storage, and locks three rings of steel for exceptional strength and precise alignment Chassis comes with a low friction, anti-corrosion finished, standard positively in both the folded and open positions. Ergonomic pistol #100-015-701AS Rem 700 X-Ray Chassis, Black, ​ with the bore. The rivetless, circlip-type extractor and heavy-duty, AICS 5 round magazine. Stage 1.5 model has a conventional, fixed grip gives the shooter a straight back pull for enhanced trigger con- 2C509N80 ���������������������������������������������� $ 599.99 spring-loaded, plunger ejector clear the chamber quickly and reli- buttstock and is available for .223 and .308 (Short) actions, or .300 trol. The side cut away magazine well allows smooth, rapid maga- #100-015-703AS Rem 700 X-Ray Chassis, Flat Dark ably. Easy-to-reach, two-position thumb safety engages quietly to Win. Mag. (Long) action. Stage 2 model has a left-folding buttstock zine changes. Underside of forend has integral attachment points Earth, 2C607M65​ ���������������������������������� 629.99 prevent game-spooking, and allows unloading in the “safe” posi- that collapses at the wrist for compact storage and is available for for Harris™ bipods. A keyhole slot system on the free floating forend #100-015-702AS Rem 700 X-Ray Chassis, Gray, ​ tion. Build your custom rifle today on an action you can trust. FFL .308 (Short) actions only. Both models are 30¼" (76.8cm) long and tube lets you quickly and securely attach rail sections or accessories. 2C607N65 ������������������������������������������������ 629.99 required for purchase. Assembly comes with a low friction, anti-corrosion finished 5 round available in Black, O.D. Green, and Flat Dark Earth (FDE). Each chas- #100-015-704AS X-Ray LOP Spacer Set, 2C21J46​ �������� 22.99 SPECS: Receiver/Bolt - Carbon steel, blued finish (CS), or stainless steel, sis comes with a 5-round detachable magazine; additional mags magazine, an 80mm rail, and multiple flush cup sling points. Chassis 1 natural finish (SS). 1 /16"-16 tpi thread. Bolt not equipped with Integrated sold separately. available for Remington 700 short (SA) in .308 Win and long (LA) Security System (ISS). X-Mark Pro Trigger - Steel, electroless nickel plated actions in .300 Win Mag or .338 Lapua Magnum (CIP). finish. Includes trigger lock and owner’s manual. DOES NOT include STOCK # MODEL ACTION COLOR PRICE SPECS: Fiberglass-reinforced molded polymer with aluminum chassis receiver plug screws, recoil lug, triggerguard, triggerguard screws, and #100-015-885AS Stage 1.5 Fixed .308 (SA) Black 4D979Q99 $ 979.99 and steel hardware. Available in Black, Flat Dark Earth (FDE), and OD Items MODULAR DRIVEN TECHNOLOGIES magazine components. Short Action (SA) and Long Action (LA) models #100-015-886AS Stage 1.5 Fixed .308 (SA) FDE 4D949N99 $ 949.99 Green. 39.5"(100.3cm ) OAL. 5.6 lb. (2.54Kg) wt. Includes .4" (10mm) and available. Standard receivers have a .473" dia. bolt face. Magnum receiv- .8" (20mm) thick spacers for buttpad, plus one all-steel 5 round magazine LSS CHASSIS #100-015-884AS Stage 1.5 Fixed .308 (SA) Green 4D949D99 $ 949.99 ers have a .535" dia. bolt face. Ultra Magnum have .535" dia. bolt face and (matte black anti-corrosion finish). #100-015-906AS Stage 1.5 Fixed .300 Win. Black 4D1029M99 $ 1029.99 Takes Your Bolt wider feed rails to accommodate Ultra Mag cartridges. Small SA receiver #100-015-914AS .308 AX Stage 2 Chassis, Black, ​ Action To The Next fits .223 Rem. family of cartridges with .378" (9.6mm) dia. case head. Mag. (LA) 4D1559A99 �������������������������������������������� $ 1559.99 Level In Tactical #100-015-908AS Stage 1.5 Fixed .300 Win. FDE 4D1029M99 $ 1029.99 STOCK # RECEIVER SIZE STEEL PRICE #100-015-913AS .308 AX Stage 2 Chassis, Green, ​ Versatility Mag. (LA) 4D1559G99 �������������������������������������������� 1559.99 #767-000-818AS Standard SA CS 7F429Q69 $ 459.99 #100-015-905AS Stage 1.5 Fixed .300 Win. Green 4D1029D99 $ 1029.99 #100-015-915AS .308 AX Stage 2 Chassis, FDE, ​ Drop-in chassis pro- #767-000-868AS Standard SA SS 7F472Q50 $ 508.99 Mag. (LA) 4D1559P99 �������������������������������������������� 1559.99 vides a lightweight and #767-000-866AS Standard LA CS 7F457H34 $ 478.99 #100-015-888AS Stage 2 Folding .308 (SA) Black 4D1199I99 $ 1199.99 #100-015-917AS .300 Win Mag AX Stage 2 Chassis, versatile platform for 7F476N43 bolt action rifles. The LSS is ready to accept standard AR-15/M16 #767-000-869AS Standard LA SS $ 498.99 #100-015-889AS Stage 2 Folding .308 (SA) FDE 4D1199H99 $ 1199.99 Black, 4D1649M99​ ������������������������������ 1649.99 #767-000-867AS Magnum LA CS 7F457C34 $ 478.99 grips, collapsible stocks, and AICS style detachable magazines. Only #100-015-887AS Stage 2 Folding .308 (SA) Green 4D1199N99 $ 1199.99 #100-015-916AS .300 Win Mag AX Stage 2 Chassis, the receiver makes contact with the V-Shape bedding and recoil lug 7F487L50 #767-000-870AS Magnum LA SS $ 525.99 Green, 4D1649I99​ ������������������������������ 1649.99 area on the chassis, ensuring high accuracy and repeatability. Plenty #767-000-955AS Ultra Magnum LA CS 7F472A21 $ 493.99 100-015-920AS .338 Lapua AX Stage 2 Chassis, of spacing on the handguard makes standard and bull barrels free #767-000-956AS Ultra Magnum LA SS 7F487L50 $ 525.99 Black, 4D1649Q99​ ������������������������������ 1649.99 floating. Mounting holes on the forend are compatible with Magpul #100-015-921AS .338 Lapua AX Stage 2 Chassis, FDE, ​ L5 and L3 rails. Short Action (SA) models use MDT and AICS-style ® ® NORDIC COMPONENTS RUGER 10/22 4D1649Q99 ������������������������������������������ 1649.99 detachable box magazines for .223 or .308. Long Action (LA) mod- #100-013-354AS .308 AX Mag, 5-Rd, 4D89B99​ ���������� 89.99 els use AICS-style 3.715" long action magazines. AR22 RECEIVER CHASSIS SPECS: Aluminum, CerrakoteTM finish, Black (Blk) or Flat Dark Earth (FDE). #100-013-355AS .308 AX Mag, 10-Rd, 4D109H99​ ������ 109.99 MODULAR DRIVEN TECHNOLOGIES Approx. 1.6 lbs. (725g) wt. Accepts standard AR-15/M16 carbine collaps- Accepts AR-15/M16 #100-013-356AS .300 Win Mag AX Mag, 5-Rd, ​ ible stocks; fixed A1/A2-type stock requires an adapter, sold separately. LSS CHASSIS STOCK ADAPTERS Accessories For Optimal 4D99J99 ������������������������������������������������ 99.99 Accepts AR15 grips without beavertail. Savage does not work on rifles with Upgrades Stock On Your MDT LSS Chassis Tactical Configurations bolt release in front of trigger. #100-013-597AS Rem 700 SA LSS Chassis, Blk, ​ Aluminum adapters let you modify the MDT CNC machined alumi- 6E379B71 �������������������������������������������������� $ 399.00 LSS chassis to meet your specific needs. Folding num chassis takes full advantage of proven technology and ac- #100-013-598AS Rem 700 SA LSS Chassis, FDE, ​ Stock Adapter is available for rifles with fixed or FORTMANNS REMINGTON 740, 742, 760 3 cepts off-the-shelf AR-15/M16 free float tubes, hand grips, receiver 6E374Q51 ������������������������������������������������ 399.00 collapsible stocks and will add approximately /4" extensions, and buttstocks. Heavy duty upper and lower wraps- to the length of pull to the rifle. Will not lock stock EJECTION PORT DUST COVER 100-014-207AS Rem 700 LA LSS Chassis, Blk, ​ around around the original receiver to create a one-piece unit and in folded position and not usable on AR-15s. Fixed Stock Adapter 6E391N82 ������������������������������������������������ 449.00 provide the starting point for an outstanding tactical platform. Up- Keeps Action Clean, allows you to replace the collapsible stock with a fixed buttstock 100-014-212AS Rem Model Seven LSS Chassis, Blk, ​ per attaches firmly to the top of receiver for a rock-solid mount Operating Smoothly 6E374A51 �������������������������������������������������� 399.00 and is designed to leave plenty of room for your hand between the 1 and improved accuracy. Includes a built-in Weaver-style base 6 /2" stock and the grip. long that allows a variety of options for mounting optics. Radiused Keeps dirt and debris 100-014-210AS Savage LA 110/111/112/116 LSS SPECS: Aluminum, hardcoat anodized, black. Folding Stock Adapter – 1 from entering through the Chassis, Blk, 6E416P04​ ������������������������ 449.00 3 7 edges give a streamlined appearance, reduce weight, and prevent /4" (44mm) long. Fixed Stock Adapter - /8" (22mm) long. snagging; hardcoat anodized for durability. Fits factory 10/22 bar- ejection port and obstruct- 100-014-211AS Tikka T3 .223/.308 LSS Chassis, Blk, ​ #100-015-982AS Folding Stock Adapter For Fixed reled action and trigger group, including heavy barrels up to .990" ing the action. Quality replacement for Remington part that is no 6E349I39 �������������������������������������������������� 399.00 Stock, 6E121F55​ ������������������������������������ $ 129.99 in diameter. ab longer available. ab #100-014-687AS MDT .223 Box Mag, 10-Rd, ​ 1 #100-015-983AS Folding Stock Adapter For SPECS: T6 aluminum, hardcoat anodized, matte black. 9 /2" (24cm) long, SPECS: Plastic, black. 740 - fits Rem 740 & 742. 760 - fits Rem 760. 6E35K30 �������������������������������������������������� 39.99 1 5 Collapsible Stock, 6E121G55​ �������������� 129.99 1 /2" (3.8cm) wide, 3 /16" (8.4cm) high. 23 oz. (652g) weight. #331-740-000AS 740 Dust Cover, 1C6N29​ �������������������������$ 6.99 #100-014-686AS MDT .308 Box Mag, 10-Rd, #100-015-984AS Fixed Stock Adapter , 6E42Q44​ �������� 49.00 #100-003-499AS AR22 Receiver Chassis, 1B150I01​ ������ $ 169.99 #331-760-000AS 760 Dust Cover, 1C6E54​ ��������������������������� 6.99 6E35C30​ �������������������������������������������������� 39.99 c eiver s & C H ASS I S re SATISFACTION GUARANTEED

PAGE 156 SINCE 1939 Office/Tech: 641-623-5401 MODULAR DRIVEN TECHNOLOGIES TROY INDUSTRIES M14/M1A SCOTTWERX, LLC RUGER® 10/22® VLTOR M14/M1A REM 700/SAVAGE MODULAR CHASSIS SYSTEM “CHICAGO” CONVERSION KIT CASV-14 UPPER RAIL SYSTEM TAC21 CHASSIS SYSTEM Add Tactical Rail To Your M14/M1A For Optics & Gives A Bolt Action 10/22 receiver & barrel not included Accessories Mounting

The Accuracy RIFLE Of A Benchrest Rail system mounts Rifle With AR-15 Advanced Tactical System For on most M14/M1A rifles Ergonomics Accessory Mounting & Improved Accuracy Convert Your 10/22 To A to maximize optic and ac- Classic Look-Alike cessory mounting options. Replaces standard handguard. Alumi- Aluminum chas- High quality, machined aluminum chassis turns your M14/M1A num construction adds less than one pound to your rifle for 16" of sis system anchors service rifle into an advanced tactical weapon platform with a built- Easy-to-install kit gives mounting space. Does not permanently alter the rifle, and center a Remington 700 or in, four-rail system for mounting accessories. Rigid, two-piece upper your Ruger 10/22 the instantly groove allows for use of iron sights. Three secure mount points — Action, barrel, scope, pistol Savage barreled ac- and lower with an adjustable bedding block allows fine-tuning for recognizable appearance and stripper clip guide, rear of barrel and operating rod guide. Op rod grip & stock sold separately tion in a V-shaped improved accuracy. MIL-STD 1913 Picatinny rails feature numbered handling of the classic, 1920- must be fully exposed for rail system to fit. Offers two holes compat- bedding block cross slots for easy identification, plus machined lightening holes 30’s submachine gun. For a ible with quick-detach sling mounts, and multiple points for extra for a rock solid between the rails for enhanced barrel cooling. Low profile top rail al- fraction of the cost of an origi- Picatinny rail sections. Will not fit on heavy barrel M14/M1As such as mounting that lows back-up iron sights or co-witness capability. Back end accepts nal, you can shoot a look-alike National Match or M21. ab combines the AR-15/M16 style buttstock assemblies and pistol grips for superior using plentiful .22 LR ammunition without putting wear on a his- SPECS: Aluminum, matte black finish. 17" (43cm) O.A.L. Handguard chassis 700 SA Chassis recoil control and reduced muzzle jump. Easy installation without in FDE consistent ac- toric heirloom. Kit includes all mounting hardware and tools, no 12.7" (32cm) long. 1.9" (4.8cm) wide at rear of handguard. 1.6" (4cm) wide curacy of a special tools; fits all diameter M-14 barrels and standard operating gunsmithing required. Simply remove the 10/22’s barreled action at front of handguard. 13.5 oz. (382g) wt. Mounting hardware included. benchrest rifle rod guide. T6 aluminum, hardcoat anodized for durability. ab from the factory stock, and install the kit components following 1 #100-009-532AS VLTOR CASV-14 Upper Rail System, ​ 5" Accessory SPECS: Chassis – T6 aluminum, hardcoat anodized, matte black. 23 /2" the step-by-step instructions. The action fits securely into the kit’s Rail with the familiar ergonomics of the AR-15/ 3A293D36 �������������������������������������������������$ 325.95 B O L M16 platform. Straight-line design directs (59.7cm) OAL. Rails: Top - 22" long (56cm), Bottom – 11" long (28cm), precision-machined, billet aluminum chassis—no drilling or perma- 1 1 recoil force directly to the rear, dramatically Right – 6 /2" long (16.5cm), Left – 6 /2" long. nent alterations to the action are required, so you can return it to reducing muzzle rise and time to get back on #100-003-461AS M14 Modular Chassis System, Black, ​ the original stock at any time. Like the original-production model, T COMPON E NTS target for follow-up shots. Bottom metal is 3B545N85 �������������������������������������������������$ 559.99 the kit’s three-piece stock is cut from high-quality, walnut with an attractive oil finish. Includes the rectangular, windage-adjustable 5" configured to accept Accuracy International #100-003-462AS M14 Modular Chassis System, Dark FULTON ARMORY M14/M1A Accessory detachable box magazines, sold separately Earth, 3B542B78​ ������������������������������������� 559.99 rear peep sight of the early civilian subgun, and a clamp-on muzzle Rail below. The MDT21 accepts any AR-15 pistol tip that slides around the factory front sight and replicates the profile SIMULATED SELECTOR LEVER grip, receiver extension tube, and buttstock of the original Cutts compensator. All the metal parts have a du- to increase the rifle’s versatility by mounting a variety of popular rable, semi-gloss blue-black powder coat finish. Kit available alone Fills The Gap In The Stock AR-15 accessories. Integral Picatinny rail provides an ultra-stable or with Pro-Mag 50-round drum magazine that lets you send plenty & Gives A Semi-Auto Rifle scope platform with built-in 20 MOA elevation for extended-range SAGE INTERNATIONAL M14/M1A of rounds downrange between reloads and completes the iconic A “Full-Auto” Look shooting. Free-float aluminum forend has a full-length Picatinny rail look of the Prohibition Era guns famous from movies and historic on top and mounting holes that accept bolt-on TAC21 Accessory ENHANCED BATTLE RIFLE CHASSIS photographs. (Factory 10/22 magazines still work, too.) ab One-piece simulated Rails (sold separately) with Picatinny slots for mounting additional SPECS: Aluminum, powder coat finish, black, semi-gloss; walnut, matte selector lever made of accessories. Rails available in 2.5", 5", and 6.5" lengths; 5" and 6.5" finish. Kit includes receiver chassis, buttstock, pistol grip, forend grip, Parkerized steel fits in the selector lever cutout in USGI and after- rails have sockets for pushbutton-style QD sling swivels. muzzle tip, front grip bracket, mounting hardware, and instructions. Avail- market M14 stocks to give your rifle the authentic appearance of SPECS: 6061 T6 aluminum, mil-spec Type III hardcoat anodized, matte able with or without Pro-Mag 50-round drum magazine. Spare magazines a full-auto capable GI M14. Fills the unsightly gap and helps keep available separately. dirt and debris out of the action. Rotates to “semi-” or “full-auto” black (Blk) or flat dark earth (FDE). 3 lbs. (1.36kg). Pistol grip, receiver Chassis Gives Adjustable Stock & Mounting extension, and buttstock not included. Accepts barrels up to 1.350" O.D. #100-004-510AS Conversion Kit & Drum Magazine, ​ position. Installs on the stock, not the receiver – perfectly legal. ab Rem 700 Short Action (SA) accepts Accuracy International .223/.308 Options for M1A/M14 6C384B91 ������������������������������������������������ $ 399.99 SPECS: Steel, Parkerized, matte black. Fits USGI and aftermarket M14 rifle stocks with selector lever cutout. Mounting hardware included. Minor magazines available alone or with two 5 or 10 round magazines. Rem Machined aluminum chassis system accepts mil-spec M1A/M14 #100-004-509AS Conversion Kit, only, 6C322B53​ �������� 349.99 fitting required. 700 Long Action (LA) accepts Accuracy International (AI) long action rifles with standard or medium-profile barrels, and gives 6-position #687-000-028AS 50-Round Drum Magazine, only, ​ magazines with 3.715" OAL. Savage Chassis fits Model 10, 11, 12, and 16 collapsible stock, adjustable cheek rest, ergonomic pistol grip, and 7H63Q70 �������������������������������������������������� 67.99 #100-005-279AS Simulated Selector Lever, 3K45Q03​ ����$ 49.99 rifles with 4.4” hole spacing and a side bolt release. Will not fit Model 12 plenty of 1913 Picatinny rail mounts for optics, lights, lasers and Palma, FTR, F-Class, or Bench Rest. TAC21 Accessory Rails available in other accessories. Solid billet construction gives strength and rigid- 2.5" (6.4cm), 5" (12.7cm), and 6.5" (16.5cm) lengths. Matte black finish. ity. Removable polymer forend features palm-swell for grip. Three Mounting hardware included. ambidextrous sling mounts provide versatility. Generous rubber #100-007-351AS Rem 700 SA Chassis, Blk, pad helps absorb recoil. Precision-machined receiver lug recesses TROY INDUSTRIES RUGER® 10/22® JAMES RIVER ARMORY 6E651J37​ �������������������������������������������������� $ 699.99 eliminate need for extra bedding, and help accuracy potential. Will #100-008-038AS Rem 700 SA Chassis w/2 5-Rd Mags, NOT accept rear-lugged receivers. ab T-22 TRX CHASSIS ROCK-OLA M14 BOLT Blk, 6E771C03​ ���������������������������������������� 799.99 SPECS: Machined aluminum billet, hardcoat anodized matte black fin- New-Manufactured Part With 1 1 #100-012-674AS Rem 700 SA Chassis w/2 10-Rd ish. OAL: Collapsed, 27 /2" (69.8cm); fully extended 33 /2" (85.1cm). 5.1 The Look Of A USGI Original Mags, Blk, 6E782I80​ ������������������������������ 809.99 lbs (2.3kg) wt. #100-012-303AS Rem 700 SA Chassis, FDE, ​ #819-000-001AS Enhanced Battle Rifle Chasis, ​ Forged steel bolt drops into M14/ 6E651H37 ������������������������������������������������ 699.99 9A840H00 ��������������������������������������������� $ 840.00 M1A receivers to replace exhausted original part or complete a new, from-the-ground-up rifle build. #100-012-305AS Rem 700 SA Chassis w/2 5-Rd Mags, Manufactured and heat-treated to original USGI M14 specifications. FDE, 6E750M05​ �������������������������������������� 799.99 Gives Your 10/22 The “Black Rifle” May require minor fitting. Gunsmith installation recommended. #100-008-333AS Rem 700 LA Chassis, Blk, ​ Look & Function Marked “Rock-Ola” on top of the bolt. ab 6E749J02 ������������������������������������������������ 799.99 #100-014-760AS Rockola M14 Bolt, 7B189I00​ ������������� $ 189.00 #100-009-792AS TAC21 2.5" Accessory Rail, ​ REMINGTON 700 ML Machined aluminum chassis customizes your 10/22 with the 6E9P54 ����������������������������������������������������� 14.99 look and feel of an advanced tactical rifle system for inexpensive #100-009-791AS TAC21 5" Accessory Rail, 6E14B85​ ���� 22.99 BREECH PLUG tactical training, or pure plinking fun at the range. Barreled action re #100-009-790AS TAC21 6.5" Accessory Rail, ​ Critical For Keeping Your Muzzleloader simply drops into the T-22 chassis for instant upgrade. Full-length 6E18N57 �������������������������������������������������� 29.99 Picatinny top rail greatly expands optics mounting choices. Chas- FORTMANNS REMINGTON c eiver s & C H ASS I S Shooting sis comes with 5-position collapsible stock, and accepts any com- #100-014-687AS MDT .223 Box Mag, 10-Rd, ​ If your 700 ML has been sidelined by a badly mercial or “univerisal” AR-15 stock or pistol grip. Features integral NYLON 66 BOLT HANDLE 6E35K30 �������������������������������������������������� 39.99 flip-up Troy BattleSights with front adjustable for elevation and rear corroded or damaged breech plug, get it back in the field with this Stronger Than The Factory Part #100-014-686AS MDT .308 Box Mag, 10-Rd, high-quality replacement for the discontinued factory part. Our for windage. Chassis free floats both standard and bull barrels for 6E35C30​ �������������������������������������������������� 39.99 drop-in replacement is machined from tough, 416 stainless steel enhanced accuracy. Ventilation cuts save weight and enhance your Strong, Nylon-Delrin, replacement for broken or age-embrit- #100-005-887AS .308 AICS Magazine, 5-Rd, ​ for superior corrosion resistance and years of reliable service. ab rifle’s unique appearance. ab tled Nylon 66 bolt handles. Restores function and value. Styled after 4D81H99 �������������������������������������������������� 81.99 SPECS: 416 stainless steel, natural finish. Fits Remington 700 ML muzzle- SPECS: Aluminum, hardcoat anodized, matte black. 28.75" (73cm) O.A.L. the correct part, maintains original appearance. ab #100-005-889AS .300 Win. Mag. AICS Magazine, 5-Rd, ​ loaders. with stock collapsed. 16.25" (41cm) rail space. 2.12 lbs. (1.26kg) wt. SPECS: Nylon-Delrin, Black. Not affected by oils and solvents. 4D109F99 ������������������������������������������������ 109.99 #078-000-158AS 700 ML Breech Plug, 3K15N56​ �������������$ 19.99 #100-008-497AS T-22 TRX Chassis, 3B311P05​ �������������� $ 329.99 #331-066-100AS Nylon 66 Bolt Handle, 1C4C73​ ���������������$ 5.49

order on the web

Orders/Tech: 800-741-0015 brownells.com PAGE 157 SMITH ENTERPRISE M14/M1A GENTRY MAUSER 98 KINETIC RESEARCH GROUP REMINGTON 700 McFARLAND ENGRAVED BOLT KNOBS EXTENDED BOLT STOP THREE-POSITION BOLT LIFT Professionally-Done; Two Improves Bolt Release & Lock-Up SAFETY SHROUD Add An Oversized Bolt Knob To Your Rifle Or Three Panels Without Gunsmithing Gorgeous, jewel-like, Precision-machined and hardened, steel Winchester-Style For Custom Mauser Rifles hand-engraved checkering bolt stops help ensure consistent bolt release Gives your 700 rifle an oversized bolt knob pattern follows the graceful teardrop shape of the knob to perfec- and lockup, and offer increased service life over Upgrades the venerable Mauser action to a full, three-position without requiring permanent modifications to tion. The diamonds absolutely sparkle...one of these will definitely the factory part. A large, easy-to-find, serrated safety. All machined steel shroud and lever are polished, beautifully the factory bolt. The ergonomic contour of the put any rifle several steps above the rest. 2-Panel features two pad to helps reduce the time it takes to get the bolt back into battery blued and ready for installation. Retains the gas deflecting design Bolt Lift helps you get a positive grip on the

rifle panels with fine border outlines; 3-Panel has three equally-spaced after a magazine change, and is standard issue on many U.S. Military of the original shroud but provides bolt locked, bolt open and fire bolt knob for faster follow-up shots in all con- panels without border outlines. ab MK14 Mod O and M-14SE rifles. Low maintenance, Parkerized finish positions with positive detents. ab ditions. The reinforced polymer two halves of 9 13 SPECS: Steel, in-the-white. 2 /32" (58mm) long. /16" (20.6mm) diameter resists corrosion and matches the rest of your rifle. ab SPECS: Approximately 2" (5cm) long overall, polished, blued finish, 2.5 oz. the kit clamp securely around the bolt handle, teardrop. Shank tapers from .383" (9.7mm) to .303" (7.7mm). Stub is .45" SPECS: 8620 steel, black, matte, Parkerized finish. Hardened to Rc 35- (71 g) wt. Fits M-98 only. Gunsmith installation required. secured by a steel Allen screw and two stain- 5 9 7 (11.4mm) diameter. No. 1, 2 panel, outline. No. 2, 2 panel, no outline. No. 38 Internal, Rc 60 Surface. /8" (15.9mm) long, /16" (14.3mm) wide, /8" #339-500-098AS 3-Position M-98 Safety, 9C177E76​ �����$ 189.99 less steel pins. Kit includes rubber O-ring spac- 3, 3 panel. No. 4, 4 panel. (22.2mm) high. ers to ensure a tight fit on different-sized Remington bolt knobs. ab #851-000-055AS M14/M1A Extended Bolt Stop, ​ SPECS: Reinforced polymer, black or flat dark earth (FDE). 1½" (3.8cm) #597-100-001AS 2-Panel Engraved Bolt Knob, ​ 1E52I53 ������������������������������������������������������ $ 56.99 long, 1" (2.5cm) dia. Fits Remington 700 bolt knobs. Includes stainless 7E121M56 ������������������������������������������������ $ 134.99 steel mounting hardware and instructions. #597-100-003AS 3-Panel Engraved Bolt Knob, ​ GENTRY REMINGTON 700 #100-013-741AS Remington 700 Bolt Lift, Black, ​ 7E175H72 �������������������������������������������������� 189.99 THREE-POSITION SAFETY SHROUD 2C26Q78 ���������������������������������������������������� $ 28.00 #100-013-742AS Remington 700 Bolt Lift, FDE, ​ AMERICAN RIFLE WORKS Side Swing-Style To Upgrade Factory 2C26F78 ���������������������������������������������������� 28.00 MAUSER BOLT SHROUD Guns Or Build Custom Rifles TACTICAL OPERATIONS Enhance The Look Of Your All-machined steel shroud and lever TACTICAL BOLT KNOB CONVERSION Sporterized Rifle upgrades the Remington 700 action to a three-position safety. Lets you use match TALLEY CLASSIC BOLT KNOB Oversize Knob For Fast, Steel bolt shroud, machined grade triggers that lack a safety. Provides bolt locked, bolt open, Positive Action Cycling; Installs from bar stock, gives your rifle a and fire positions with positive detents. No tools needed to field strip Graceful, Teardrop Knob With With Or Without Adapter Stud clean, unique look. A trigger mounted safety is required and gun- for cleaning or service. Available in polished blue. ab Straight Shank For Customizing smith installation is recommended. Models available for Mauser FN SPECS: 4140 steel, polished blue. Approx. 2" (5cm) OAL, 2.5 oz. (71g) For Desired Look & Feel and Swedish Mauser 95-96. ab wt. Fits Remington 700/Model Seven/721/722/600/660/XP-100. Right- The same graceful, classic, straight bolt knob used by many of SPECS: Steel, in-the-white, bead blast finish. hand only. the top builders for their custom guns. Lathe turned from a solid Unique, 2-piece, bolt knob conversion gives the tactical rifle e nts t compon piece of low carbon bar stock, ready to polish, checker or alter as builder the flexibility to extend the overall bolt handle length for #100-001-865AS Bolt Shroud, Mauser FN Style, ​ #339-000-001AS 3-Pos. Safety Shroud, 9C141M96​ ������ $ 154.99 maximum leverage, or to maintain near factory length for minimal 7A36M43 �����������������������������������������������������$ 39.99 you need. Extra stock left on the end for easy chucking in the lathe. 1 bulk or weight increase. Installation is fast and easy – simply cut off b o l Welds beautifully using our 3 /2% nickel welding rod. ab #100-001-866AS Bolt Shroud, Swedish Mauser 95-96, ​ 3 1 the factory bolt knob, drill the cut end of the bolt handle shank, TIG SPECS: Handle/knob, 2 /8" (6cm) lg. 3" (7.6cm) o.a.l. 3 /2 oz. (99 g). 7A42P22 ������������������������������������������������������ 49.99 weld or silver solder the pre-threaded adapter stud in place, and #874-006-000AS Talley Classic Bolt Knob, 4G8K77​ �����������$ 9.99 screw-on the tactical knob. Increases overall bolt handle length HOLLAND REMINGTON 700 by up to 1" for added leverage and to prevent the trigger finger from hitting the bolt knob when shouldering the rifle. For minimal TACTICAL BOLT HANDLE 5 length increase, turn and thread the bolt handle shank for /16"-18 tpi Extra Length For Quick, Positive and screw-on the knob. Oversize, tapered knob is machined from Operation UNIVERSAL BOLT HANDLE 6061 T-6 aluminum for maximum strength with minimal weight LARGE-RING MAUSER increase. Available with Hard Anodized, semi-gloss, black finish or Long, swept-back handle puts the bolt knob in easy reach for Lenard Brownell Style To Fit with the addition of Walter Birdsong’s matte Black-T tactical fin- BOLT SHROUD faster operation. Features a Model 70-style, rear sweep, plus .650" Most Bolt Actions ish. ab additional length that gives competitive and rapid fire shooters, or The classic shape and elegance of Lenard Brownell’s famous SPECS: Knob - 6061 T-6 aluminum, hard-anodized, semi-gloss black or Classy Way To Streamline A ’98 anyone wearing gloves, a sure, positive grip. Provides the needed hard-anodized with matte Black-T coating. Adapter Stud - Chrome moly, cutaway bolt handle, made easier to install. Additional Remington- 1 7 5 leverage to help clear tight or stuck cases. ab 16 16 16 Finish off that sporterized military Mauser by replacing the style metal at the attachment end of the handle makes silver sol- in-the-white. 1 / " (2.7cm) long, O.D. tapers 1" (2.5cm) to / " (1.1cm), / "- SPECS: 17-4 stainless steel (SS) or 4140 chrome moly steel (CM), in-the- ugly, issue shroud with this streamlined, classy, commercial-style dering or welding fast and easy. Heat, shape and adapt to fit most 18 tpi. 1.5 oz. (42.5g) wt. Gunsmith installation recommended. white. Hardened to Rc 42-44. 3.7" (9.4cm) long. shroud. Greatly improves looks of the bolt and eliminates the awk- bolt actions. ab #100-003-078AS Black-T Tactical Bolt Knob, ​ ward, over-the-top, military safety. Since the original safety is re- #403-000-010AS SS Tactical Bolt Handle, 3K40H58​ ������ $ 42.99 SPECS: 4130 chrome-moly steel, in-the-white. 3" (7.6cm) long, .730" 8B36J72 ������������������������������������������������������ $ 41.95 moved, you must INSTALL A TRIGGER WITH ITS OWN SAFETY (like #403-000-011AS CM Tactical Bolt Handle, 3K39C02​ ���� 42.99 (18mm) diameter knob. 1.9 oz. (54 g) wt. #100-003-079AS Anodized Tactical Bolt Knob, ​ the Timney). ab #562-101-000AS Universal Bolt Handle, 1D16E05​ �����������$ 19.99 8B38G55 ���������������������������������������������������� 41.99 1 1 SPECS: 2 /4" (5.7cm) long, 1 /4" (3.2cm) wide. 2 oz. (57 g) Investment cast steel, beaded finish. Fits all Mauser M98s. Gunsmith installation required. #078-100-098AS LR Mauser Bolt Shroud, 2B47Q95​ ������ $ 49.99 LENARD BROWNELL SAVAGE CUSTOM BOLT KNOB OVERSIZED BOLT KNOB Attractive Design, Proper End OVERSIZE BOLT HANDLE DAKOTA MAUSER 98 Grooved, Oversize Design For Shape & Weldable/Bluable Steel Faster Shooting In Competition Fast Bolt Operation MODEL 70-STYLE SHROUD WITH Make This “The Choice” For A Or On The Hunt Professional Bolt Alteration Lightweight, aluminum bolt knob fea- WING SAFETY Whether you’re a match shooter or go after varmints, this over- tures a tapered, oversize design to deliver Swept-back, streamlined design is ideal for converting military size bolt handle allows you to cycle rounds quickly, without having fast, positive bolt cycling for all types of bolt Final Professional Touch For rifles to attractive sporters . . . or simply replacing an ugly knob with to feel around for the small factory handle. Solid, smooth, one piece action rifles. Unique, stepped and grooved Mauser Modifications a beautifully designed new one! Properly shaped to give clearance design is easy to grab; your hand is immediately drawn to the bolt exterior adds muscle memory to aid your reflexes in learning to between bolt and low scope mounting. Hollowed for weight reduc- after each round. Tapered shaft and oversize bolt knob are precision grasp and operate the bolt handle the same way every time for more Classic Model 70-style safety and bolt tion and sharp appearance (if you ever do run into a customer who machined and allow for added leverage and the attractive teardrop consistent shooting form. Hollowed recess on bottom of bolt han- shroud for the equally classic Mauser ac- wants a solid knob, can be quickly welded solid). Investment cast of design adds beauty to the lines of your rifle. ab dle reduces weight even further for a light bolt lift and easy cycling. tion. Combines the gas deflecting design of the original Mauser bolt 8620 steel, selected for its ideal combi­nation of toughness and ease SPECS: Machined steel, blued, matte finish. Right-hand only. Fits Savage Installation requires machining and threading of bolt handle. ab 3 shroud with the three-position, side-swing safety of the Model 70 of working. Welds perfectly with gas or arc welder. Can be polished 110,111,112,112B top loading rifles. Bolt handle measures 2 /4" (6.9cm) SPECS: Aluminum, matte black, anodized finish. 1.6" (4cm) long, O.D. 5 for better scope clearance. Gunsmith installation required. ab and blued to highest professional standards. ab long, bolt knob measures approx. 1" (2.5cm) in diameter. tapers 1.1" (2.8cm) to .40" (1cm). 1 oz. (28g) weight. /16" - 24 tpi. Includes 1 1 7 1 SPECS: Polished steel, in-the-white. Weighs 2 /2 oz. (71 g). SPECS: 2 /2" (6.3cm) OAL, /8" (22.2mm) dia. knob. 1 /2 oz. (42 g) wt. #855-000-269AS Savage Oversize Bolt Handle, ​ instructions. #359-141-070AS Model 70-Style Shroud, 9E130I75​ ���� $ 149.99 #095-001-001AS L. Brownell Bolt Knob, 5K16D81​ �����������$ 18.00 5E24M38 �����������������������������������������������������$ 28.73 #080-000-589AS Oversized Bolt Knob, 8K23I53​ �������������� $ 28.99

SATISFACTION GUARANTEED

PAGE 158 SINCE 1939 Office/Tech: 641-623-5401 BADGER ORDNANCE BOLT KNOBS SUPERIOR SHOOTING SYSTEMS DAYTON TRAISTER GRE-TAN REMINGTON 700 Easy-To-Grasp Extended Knob Gives SPEEDLOCK FIRING PIN KITS COCK-ON-OPEN KIT LITE FIRING PIN & SPRING Positive Bolt Cycling Decreased Weight & Oversize diameter and extended Reduced Lock Time length give positive bolt control for fum- ble-free cycling of tactical and benchrest rifle Upgrades Action For Easier Operation 7075 aluminum shank with a heat-treated stainless steel pin de- rifles. No more holding the bolt handle creases lock times by 36-38% compared to standard, steel firing pin. with two fingers to clear the scope bell. 1 SMALL RING MAUSER - Fits 93-96 Mausers. Redesigned cocking Cut Lock Times By /3 & More For Improved Accuracy Long action firing pin is 328 grains (56% lighter than factory); short Provides additional leverage needed to piece and striker spring. Works with Dayton Traister, other com- action weighs 289 grains (55% lighter than factory). Includes tight- clear stuck rounds. Lightweight aluminum Lightweight firing pins weigh less than half of original factory mercial triggers or military trigger and safety ab fitting steel spring that won’t rub inside the bolt body and reduces keeps weight down. Gunsmith installation firing pins, and the weight savings alone would decrease lock times SPECS: Steel, black, matte finish. Requires bolt modification. Mini wear and binding. ab recommended. Installation requires ma- dramatically. But, for even faster lock times and to help ensure posi- #240-150-096AS 93-96 Cock/Open Kit, 4B28B76​ ����������� $ 37.99 SPECS: 7075 aluminum shank, heat-treated stainless steel pin, polished chining and threading of original bolt handle. ab tive ignition, the Tubb Firing Pins come with a factory weight chrome natural finish, steel spring. Long Action (LA) Firing Pin – 6.8" (17.8) long; SPECS: 7075 T6 aluminum alloy, hardcoat anodized, matte black finish. silicon spring. CS springs maintain load height and compression P-14, P-17 ENFIELD - For 1914/1917 Enfield. New cocking piece 1 Short Action (SA) Firing Pin – 6.1" (15.4cm) Target - 1 /2" (4cm) long, .975" (24.7mm) diameter. Mini Tactical - 1.2" strength without taking a set for thousands of compression cycles. and striker spring replace factory parts. Must be used with Dayton (3cm) long, .890" (22.6mm) dia. Faster lock time means there’s less chance of gun movement be- Traister trigger. ab #309-000-006AS Lite LA Firing Pin/Spring, 9K30N77​ ���� $ 39.00 #093-000-007AS Target Bolt Knob, 3K30A86​ �������������������$ 32.99 tween the time the trigger is pulled and the firing pin hits the primer. SPECS: Steel, black, matte finish. Requires bolt modification. #309-000-007AS Lite SA Firing Pin/Spring, 9K30B77​ ������ 39.00 Tubb Firing Pins cut lock time without increasing vibrations and #093-000-045AS Mini Tactical Bolt Knob, 3K33H74​ ������� 34.99 #240-150-017AS Enfield Cock/Open Kit, 4B26B94​ �������� $ 29.99 maintain positive ignition. Designed by NRA Highpower Rifle and Highpower Silhouette Champion David Tubb. Perfect for benchrest shooting and especially valuable for off-hand shooters...whether they’re Highpower or Silhouette competitors, or hunters wanting REMINGTON 700 FIRING PIN ASSEMBLY the best, cleanest shot possible. ab b o l SURGEON RIFLES BOLT KNOBS SPECS: Firing Pin - 70 series machined aluminum with 4140 steel tips. GRE-TAN REMINGTON 700 Non-ISS Assembly Takes Your Spring - Chrome silicon, heat-treated, shot peened, stress relieved. Rem- Late Model Rifle Back In Time Oversized, Hand-Filling, ington models not for use with ISS bolt lock system. Winchester fits FIRING PIN ASSEMBLY t compon e nts With Tactile Features To Aid all pre-’64 and post-’64 M70 rifles with push-feed or controlled round Factory-original, firing pin assembly eliminates the ISS bolt lock Positive Bolt Operation feed actions, except WSM models. Pre-'64 and current “Classic”-style Precision Machined To system on your current production, Remington 700 rifle to make it actions with claw extractor require the Speedlock Cocking Piece, avail- Enhance Accuracy like they used to be. Features a blued or stainless bolt shroud with Hefty, oversized bolt knobs able separately below. standard firing pin, cocking piece and firing pin spring. Proven fac- are machined from solid stain- CNC machined with tight tolerances to ensure consistent sear tory parts provide reliable function and drop-in fit. engagement and smooth, straight, firing pin travel. The lightweight less steel billet to fill the hand STOCK # FITS PRICE SPECS: Steel, blued finish or SS, natural finish. Available for long (LA) and Sniper Target comfortably and have just the aluminum bolt shroud has close tolerance bottom flats to prevent short action (SA). #840-098-000AS Mauser 98 (lg ring & commercl) 4H61G54 $ 67.99 bolt side play. Gives consistent cocking piece sear height for repeat- right weight for fast, positive #767-220-400AS Blue LA Firing Pin Assy, 7F63F01​ �����������$ 69.99 bolt operation—perfect for tactical, sniper, or benchrest applica- #840-700-001AS Remington 700 Short Action 4H65H71 $ 67.99 able engagement/release with all factory and aftermarket triggers. #767-000-916AS Blue SA Firing Pin Assy, 7F60D64 ��������� 63.99 tions. Gives the custom rifle builder extra flexibility in tailoring this #840-700-002AS Remington 700 Long Action 4H67E68 $ 69.99 Firing pin is polished with the tip ground smooth and hardened. Firing pin spring has reduced O.D. and I.D. to minimize bending and #767-000-064AS Stainless SA Firing Pin Assy, 7F62A32​ �� 64.99 critical contact point to the specific needs of each shooter. Two #840-070-003AS Winchester 70 Long Action 4H67E68 $ 69.99 5 models, both pre-threaded to fit /16"-24 tpi threaded bolt handles. drag. Assembly includes shroud, firing pin, cocking piece, and firing Sniper model has deep, cross-hatch texturing that gives you plenty pin spring. ab of purchase for fast cycling under stress, with wet hands, or when SPEEDLOCK FIRING PIN SPRINGS - The same chrome silicon SPECS: Shroud - 6061 T-6 aluminum, matte black (Blk) or silver (Sil) finish. wearing gloves. End of the knob is milled out to reduce weight for firing pin springs used Firing Pin - 4140 steel. Cocking Piece - Hardened tool steel. Long Action proper balance. Slightly narrower Target model includes three rub- in the Speedlock kits (LA) - 3.19 oz (90.4g) wt. Short Action (SA) - 2.95 oz. (83.6g) wt. Fits Rem- DAYTON TRAISTER MARK II SAFETY above. Keeps easy bolt lift and trigger pull of a factory weight ington 700 standard and ISS Locking bolts, eliminates the ISS Lock system. ber O-rings that fit in deep grooves on the knob and provide superb, Clears Lowest Scope Mounting non-slip tactile feedback for the bare hand. ab spring, with the improved ignition performance of an extra-power #100-000-446AS Firing Pin Assy., Blk/LA, 9K56I08​ ���������� $ 64.99 5 spring. Provides consistent, repeatable performance over thou- SPECS: Machined stainless steel, natural finish. /16"-24 tpi threads. Sniper Graceful design sets low, allowing low- sands of compression cycles. ab #100-000-447AS Firing Pin Assy., Blk/SA, 9K56B08​ �������� 64.99 - 2.125" (5.4cm) long, .850" (21.5mm) O.D. Target – 2" (5.1cm) long, .720" #309-000-002AS Firing Pin Assy., Sil/LA, 9K56B08​ ���������� 67.95 est possible scope mounting. One-piece (1.8cm) O.D. SPECS: Chrome silicon. Heat treated, shot peened,stress relieved. Mauser construction, beautiful, non-glare, blued 98 fits large ring and commercial. #309-000-003AS Firing Pin Assy., Sil/SA, 9K56A08​ ���������� 64.99 finish. Right-hand operation only. Easily in-

#100-006-251AS Sniper Bolt Knob, 9B46C99​ ������������������ $ 46.99 firi n g p i ns #840-000-021AS FP Spring Mauser 98, 4H10E61​ ������������ $ 13.99 #100-000-448AS Black Bolt Shroud, only, 9K27L27​ �������� 31.99 #100-004-439AS Target Bolt Knob, 9B40G99​ ������������������ 40.99 stalled, requiring slotting of bolt sleeve. ab 3 3 #840-000-022AS FP Spring Rem. 700 SA, 4H16C34​ �������� 16.99 #100-000-537AS Silver Bolt Shroud, only, 9K27E27​ �������� 31.99 SPECS: /4" (19mm) long arm, /16" (4.8mm) wide. #840-000-023AS FP Spring Rem. 700 LA, 4H16H34​ ������ 16.99 #100-000-449AS Cocking Piece, only, 9K14D22​ �������������� 19.95 Blued steel. STOCK # FITS WIN. 70 SPEEDLOCK COCKING PIECE - Replaces #240-001-950AS Mauser M-93, M-94, M-95 & M-96 the factory part and includes a reinforced cam fin- GLEND ARMS #240-001-980AS Mauser M-98, FN & Similar 204 ger that’s designed with no safety cut for added strength. Threaded through to decrease weight; #240-001-990AS Springfield FIRING PINS 211 MURRAY’S SKS threads match Winchester 70 firing pin. Steel cross- — Advise # — Mark II Safety, 4B21N71 ������������������������������ $ 22.99 Precision-Made; Duplicates The pin simplifies installation of Speedlock firing pin. ab 1 ENHANCED FIRING PIN Original SPECS: Steel, black oxide finish. 1 /4" (3.2cm) long. .220" (5.6mm) I.D. Fits all long action, Winchester 70 models pre ’64 to present. Ready for installation by gun- 204 #840-000-042AS Win 70 Cocking Piece, 4H48F78​ �������� $ 54.99 smith. Precision workmanship. Du- RIFLE BASIX REMINGTON 700 plicates original. Saves waiting for, Based On The Original Russian Design For or having to make one. ab SPEEDLOCK FIRING PIN ASSEMBLY - Complete, drop-in firing Improved Function & Safety REM-SAF SAFETY SPECS: Heat-treated, blued. Gunsmith 204 pin assembly features a fitting may be required. lightweight bolt shroud and High quality, replacement firing pin uses the original, pre-’51 Fully Interchangeable aluminum firing pin with Russian design to eliminate the potential for accidental slam-fires With The Factory Safety RIFLE FIRING PINS heat-treated 4140 steel and uncontrollable full-auto operation associated with the current tip to reduce weight to less than half of the factory part. Factory #350-200-213AS 213/215, Marlin 36, 36A, 1936, 336, production, free-floating type firing pin. Gradual, straight taper de- Up until these replacement parts be- weight, chrome silicon firing pin spring maintains load and com- 1893, (old model), 5C17D99​ ������������������� $ 17.99 sign with Wolff brand spring prevents mechanical lockup in the bolt came available the only way to repair a dam- pression strength without taking a set to ensure positive ignition. and ensures consistent firing pin return after every shot; plus, allows aged or misplaced Remington 700 safety #350-200-211AS 211, Rem. 12, old flat style, 5C17Q99​ ��� 17.99 Black anodized bolt shroud. ab the use of soft-primered American ammunition and reloads. Fits was to send it back to the factory, factory sa fe t ie s #350-200-212AS 212, Rem. 12-121, round style, ​ SPECS: Firing Pin – Aluminum with 4140 steel tip. Springs - Chrome sili- Chinese, Yugoslavian, Albanian, Romanian, and post 1950 Russian repair center, or make your own; parts were simply not available. 5C17P99 ����������������������������������������������������� 17.99 con, heat-treated, shot peened, stress relieved. Total Weight - 2 oz. (57g). SKS rifles. Not for use in pre-1951 Russian models with shallower With these high-grade aftermarket parts you can easily replace #350-200-241AS 241, Ruger Mini 14 Series 181, ​ Includes firing pin, spring, bolt shroud, and cocking piece. Available for firing pin hole. Includes spare firing pin spring and instructions. ab damaged or lost safety parts and know the repair is solid. ab 3 5C30E99 ����������������������������������������������������� 30.99 Rem. 700 short action (SA) and long action (LA). SPECS: 420 stainless steel, natural finish. Approx. 3 /4" long. Fits post 1950 SPECS: Steel, nickel plated, silver finish. Kit includes safety lever, safety #350-200-204AS 204, Win. 1894 pre-’64 Mod. 94, M55, #840-000-053AS Rem 700 SA Firing Pin, 4H105K00​ ���� $ 105.00 Russian SKS and clones. pivot pin, detent ball, triangular spring and E-clip. M64, 5C22M99​ ����������������������������������������� 22.99 #840-000-052AS Rem 700 LA Firing Pin, 4H105B00​ ���� 105.00 #563-000-001AS SKS Firing Pin, 3F39J43​ ������������������������� $ 42.99 #758-000-011AS REM-SAF Safety Parts, 8E34K18​ ����������� $ 37.99

order on the web

Orders/Tech: 800-741-0015 brownells.com PAGE 159 ® ® MAGPUL FN SCAR 16/16S/17/17S BADGER ORDNANCE REMINGTON 700 POWER CUSTOM RUGER 10/22 REMINGTON 700-STYLE SSG SELECTOR SET FOR FN SCAR M16-STYLE EXTRACTOR SHARP CLAW EXTRACTOR RIVETED EXTRACTOR KIT Replaces Factory Part For More Positive Robust Design Ensures Positive Positive Extraction Of Match Chambers For Factory-Type Replacement Restores Selector Control Extraction The Mk II Pistol & 10/22 Rifle Function & Serviceability Redesigned selector switches provide ex- Heavy-duty, M16-style extractor re- Machined with sharp, well defined angles to securely grip case tra traction and better access for more positive places the factory part on the Reming- head and give positive extraction even on tight, match chambered Replaces the no-longer-available manipulation of the selector on the FN SCAR ton 700 bolt to provide long range and barrels. Will not “blow out” in the event of a ruptured case. Hard and Remington factory part to keep older rifles family of weapons. Drop-in replacements for tactical rifles with reliable and consistent tough titanium or A-2 Tool steel greatly extends service life. Available shooting. A fast, economical, alternative rifle the factory selector levers, and require no per- extraction even under the harshest con- in Titanium or A-2 Tool Steel. Correct dimension works in 10/22, to returning rifle to the factory for repair. manent modification to the rifle. Simply install using existing set- ditions. Standard Extractor fits .308/.30- 10/22 Magnum and Mk II pistol without modification. ab Replacement requires no modification to bolt or rifle. Fits all varia- screw (not supplied). Will fit military MK 16 and MK 17 full-auto rifles, 06 cartridges. Magnum Extractor is designed for belted magnums. SPECS: Titanium - 6 AL-4V titanium. Silver finish. Includes extra power tions of 700, 600, 600M, 660, 742, 760, 788, 40X and XP-100. Large as well as the civilian 16S and 17S semi-auto versions. ab The 338 Lapua Extractor also fits any Lapua and 416 Rigby-based spring. A-2 Tool Steel - A-2 Tool Steel, black. Inlcudes extra power spring. fits calibers with .473" (12.01mm) diameter case head, including SPECS: Reinforced polymer, black. cartridges. Installation requires permanent modification of bolt. .22-250, .243, .270, .308, .30-06, etc. Small fits calibers with .378" #713-123-003AS Titanium Extractor, 3A9G57​ ������������������� $ 9.99 (9.60mm) diameter case head, including .17 Rem., .222, .223, etc. ab #100-007-108AS SSG Selector Set, 3K16P51​ ���������������������$ 18.95 Complete, detailed instructions included. ab #713-000-067AS A-2 Tool Steel Extractor, 3A9M57​ ���������� 9.99 SPECS: 4142 steel, matte black oxide finish. 1.250" (32mm) length, .250" SPECS: Steel. Includes extractor, (2) rivets, and instructions. Gunsmith (6.4mm) width. Includes extractor spring, pin, and complete instructions. installation required. Requires modification of existing bolt. Gunsmith installation required. #078-000-007AS Rem. Riveted Extractor Kit, Large, ​ MANTICORE ARMS #100-012-491AS Standard Extractor, 308 / 30-06, ​ 8G26D57 �����������������������������������������������������$ 29.99 3K29A13 ������������������������������������������������������ $ 30.99 VOLQUARTSEN RUGER® 10/22® & MAGNUM #080-000-208AS Rem. Riveted Extractor Kit, Small, ​ TAVOR LUMA SAFETY LEVER #093-000-053AS Magnum Extractor, 300 Win Mag, ​ 8K27I50 ������������������������������������������������������� 34.99 EXACT EDGE EXTRACTOR Replaces Factory Polymer Safety Lever 3K29K13 ������������������������������������������������������ 30.99 With Metal Lever #093-000-054AS 338 Lapua Extractor, 3K29N13​ ������������ 30.99 Tuned & Hardened For Medium Lasting Performance Machined aluminum safety lever drops into BOYDS’ MAUSER Tavor rifles to replace the factory original poly- Machined with exacting tolerances; mer lever. Ambidextrous design lets Luma func- hook is .005" closer to rim to give a posi- BOLD TRIGGER tion on either side of the rifle. Available in Medium REMINGTON 597 tive, non-slip grip on the case head. The profile that mimics dimensions of original lever, Slim very precise hook point is hardened to Rc Easy To Install; Premium Quality and Slim that gives smaller profile. ab CASE EXTRACTOR 58-60, will not lose its edge, even after SPECS: Machined 6061 aluminum, hard coat anodized, matte black. .96" years of use. ab Precision-machined, light-weight r s t r acto (2.4cm) wide. Medium - .27" (7mm) wide. Slim - .15" (4mm) wide. Fully Machined & Hardened SPECS: A-2 tool steel, in-the-white. Includes aluminum housing plus hardened steel sear and internal components provide #100-014-892AS Luma Safety Lever, Med., 6D34M99​ �� �� $ 34.99 Machined tool steel for a perfect fit, hard- replacement spring. Fits 10/22 and 10/22 magnum. ex reliable performance for both the marks- #100-014-893AS Luma Safety Lever, Slim, 6D34I99​ ������� 34.99 ened for extra strength. Precision ground hook ensures positive #930-000-010AS Exact Edge Extractor, 3Z11C01​ �������������$ 12.99 man and the sportsman. Fully adjustable contact on cartridge rim for reliable extraction. ab 1 for engagement, letoff and overtravel. SPECS: 01 tool steel, blued finish. Hardened to Rc 38-40. /2" (12.7mm) 15 5 Optima (OP) model includes a two- long, /64" (5.9mm) high, /64" (2mm) thick. Fits Remington 597 .22LR, .22 position, locking thumb safety. Choose Mag, and .17 HMR. TIMNEY BUEHLER-STYLE LOW Premium (PR) model if using the factory #080-000-202AS Rem 597 Extractor, 5K12Q14​ �����������������$ 13.99 WILD WEST GUNS MARLIN safety. Adjustment range: 2.7 lb.-7 lb. ab SAFETY FOR MAUSER SPECS: Aluminum housing, steel trigger. .186" (4.7mm) wide face. OP-98 BEAR-PROOF EJECTOR and PR-98 fit Spanish Mauser 93/95, Military Mauser M-98 and Com- Positive Stops At On & Off; Simple, Fast Installation Improves Ejection Reliability With Heavy, Bear-Stopping Loads mercial Mauser M-98. OP-94/96S and PR-94/96S fit Swedish Mauser The re-make of the famous Buehler Low Safety. Faster and HARRIS GUNWORKS REM 700 M94/96. much more convenient to operate than the factory safety plus, it EDM-cut, one-piece ejector gives positive, reliable ejection with #104-100-098AS OP-98 Optima Trigger, 9C48L02​ ���������$ 55.92 the heaviest hunting loads. Replaces the lighter, and easily broken, will not interfere with even the lowest mounted scopes. Rotates SAKO-STYLE EXTRACTOR KIT #104-150-098AS PR-98 Premium Trigger, 9C41J00​ ������� 46.99 through a 70° arc on the right side of the rifle with positive stops two-piece, factory part. Prevents broken parts from jamming action. Convert Remington Bolts For Improves ejection, ensures empties are thrown clear of the receiver. #104-100-094AS OP-94/96S Optima Trigger, ​ in both the “on” and “off” positions. Securely holds the bolt and the 9C48P02 ������������������������������������������������������� 55.92 striker in the locked position. Precision CNC machined from high- Reliable Extraction A real life saver when hunting dangerous game in adverse condi- quality steel, hardened at all wear points, polished and blued. No tions. For all Marlin 336, 1895 and .444 rifles. Drop-in fit; gunsmith #104-150-094AS PR-94/96S Premium Trigger, ​ Complete parts kit converts Reming- machining required for installation on M98. M93/96 may require installation is recommended. ab 9C39K12 ����������������������������������������������������� 46.10 ton 700 bolts to use a larger, Sako-style grinding of cocking piece. ab SPECS: Spring steel, blue or nickel plated, silver finish. Tempered and extractor which grabs a bigger bite of case SPECS: Steel, blued. .490" (12.4mm) wide, .725" (18.4mm) long. M98 fits heat treated. rim for increased extractor performance. ab Mauser M98 & FN. M93/96 fits Mauser 93, 94, 95, 96 & 97 Small Ring. #981-000-003AS Blued Bear Proof Ejector, 1H31B21​ ������ $ 32.99 t rigger s SPECS: 17-4 stainless steel extractor. Kit includes extractor, plunger pin #981-000-016AS Nickel Bear Proof Ejector, 1H31J21​ ���� 32.99 #883-804-098AS Timney M98 Safety, 3H39M51​ �������������� $ 41.99 and spring. Installation requires machining of bolt. DRESSEL MAUSER 98 #883-805-096AS Timney M93/96 Safety, 3H37D45​ �������� 38.99 #562-102-000AS .308 Sako-Style Ext. Kit, 2F27N81​ ��������� $ 37.99 #562-102-001AS .223 Sako-Style Ext. Kit, 2F27E81​ ��������� 37.99 “MODEL 70”-STYLE TRIGGER WILLIAMS FIREARMS WINCHESTER 70 Simple, Rugged, Fully Adjustable WISNER Trigger For The Classic Mauser EXTRACTOR Bolt Gun TWO-POSITION SAFETY TACTICAL SOLUTIONS RUGER® 10/22® At last! A trigger with the simplic- Converts Military Safety To Convenient Side Swing Safety HEAVY DUTY EXTRACTOR ity, strength, and adjustability of the original Winchester Model 70 trig- Modernizes the original military shroud and vertical safety to Hardened Tool Steel Attractive, Finished Stainless Steel For Original Classic ger that’s specifically designed to an easier-to-operate, two-position side swing lever system. Com- With Improved Hook For fit the classic ’98 Mauser. Overtravel plete and ready-to-install; provides increased clearance for scope Reliable Extraction Machined to original “classic” dimensions with state-of-the-art and trigger pull are fully adjustable, 1 mounting. Vertical grooving on thumb lever gives a positive, no- technology for exceptional dependability and eye-pleasing aes- with a pull weight ranging from 2 /2 slip grip. Fully hardened and heat-treated to resist wear. Requires Improved hook design helps ensure consistent extraction each thetics. Machined from solid stainless steel bar stock, deburred in to 5 lbs. Precisely-machined, care- machining of your shroud. Chapman Safety Milling Fixture (found and every time. Machined from tool steel then hardened to resist a vibratory tumbler, and then heat treated to Rc 35-37. Completely fully finished, and assembled with the custom gunbuilder in mind. elsewhere in catalog) greatly simplifies installation. ab breakage and reduce wear for a lifetime of reliable operation. In- finished. Available for right-hand (RH) rifles only. ab Complete instructions included. Gunsmith installation recom- SPECS: Steel, in-the-white. Includes lever, pivot screw, plunger, and cludes extra-power spring for added reliability. Also fits Ruger® Mark SPECS: 416 stainless steel, natural finish, matte. 4.45" (11.3cm) long. Stan- mended. ab spring. Does not include shroud. Requires gunsmith installation and final I, II, III™ and 22/45™ pistols. ab dard fits non-magnum calibers from .308 to .30-06 bolt face. Magnum SPECS: Steel, silver finish. Fits Mauser 98 military and commercial actions. polishing. #120K fits M-98 Mauser. #140K fits 03/03A3 Springfield. SPECS: Tool steel extractor, high performance spring. Fits Ruger 10/22, fits all magnum calibers including short mag and super short mag Gunsmithing required. sa fe t ie s #724-015-120AS #120K 2-Position Safety, 5H32Q35​ �����$ 32.99 10/22 Magnum, Mark I/II/III & 22/45. #954-000-019AS Standard RH Extractor, 4E45M70​ �������� $ 54.99 #258-000-001AS “Model 70”-Style Mauser Trigger, ​ #724-015-140AS #140K 2-Position Safety, 5H32M35​ ����� 32.99 #100-006-000AS Heavy Duty Extractor, 8K7L57​ �����������������$ 9.99 #954-000-020AS Magnum RH Extractor, 4E45E70​ �������� 54.99 8E188J99 �������������������������������������������������$ 219.99

SATISFACTION GUARANTEED

PAGE 160 SINCE 1939 Office/Tech: 641-623-5401 rifle triggers - - 87.99 93.99 98.99 $ 87.99 $ 93.99 $ 62.99 $ 98.99 $ 109.99 161 ������ ������

- - - ​ ​ ���������� ������������

​

������������������ PAGE ​2K79F24 ​2K84P19 - ​2K89M16 ​2K89J16 ab ​6C106B31 Uses the factory Remington 700 Uses the factory Remington ���� ������������������������������������������������ ������������������������������������������������������ ������������������������������������������������������ SHARP SHOOTER SAVAGE SHARP Three-lever design gives Savage rifles a design gives Savage Three-lever N TRIGGER COMPETITIO Fully Adjustable, Lowers Pull Weight Lowers Pull Adjustable, Fully ITS - , 77/22 & 77/17 TRIGGER K crisp, consistent trigger pull by reducing sear crisp, consistent trigger pull by reducing adjustable for Fully load “up to” 60 percent. and engagement; pull, overtravel weight of ab

Savage Trigger, Black 77/22 & 77/17 Trigger Kit, Black 77/22 & 77/17 Trigger 2K79F24 Kit, Silver 77/22 & 77/17 Trigger 2K84E19 Kit, 2 lb. AK47 Trigger Kit, 3 lb. AK47 Trigger Kit, 2.5 lb., Marlin Trigger Kit, 28 oz., 700 Trigger Rem 2K56L46 Kit, Silver Mark II Trigger TRIGGER UPGRADE KITS UPGRADE TRIGGER lb. trigger pull. Upgraded sear, sear, lb. trigger pull. Upgraded 2 / 1 Fits Ruger M77 Mark II. Will not fit Target (VT) models. fit Target Will not Mark II - Fits Ruger M77 Mark II. 4130, heat-treated steel trigger and sear. Will not fit guns below Will not steel trigger and sear. heat-treated 4130, Steel, black matte or polished silver finish. 2 lb. pull Steel, black matte Steel, black, matte finish. 28 oz. pull wt. Fits Rem. 700. pull wt. oz. finish. 28 Steel, black, matte Steel, matte black finish. 2.5 lb. pull wt. Fits pre- black finish. 2.5 Steel, matte Steel, black, matte finish. 2 lb. or 3 lb. pull Steel, black, matte JARD rade Trigger Pull rade Trigger G Match- A Action Bolt Your Gives Reliable, easy-to-install upgrade kits replace some or all of the or all of some replace upgrade kits easy-to-install Reliable, SPECS: SPECS: minor fitting. Detailed instructions. May require serial number 100,000. utilizes factory safety. Adjusts from 12 oz. to 32 oz. Laser cut, steel to 32 oz. 12 oz. Adjusts from factory safety. utilizes 111, 112, 110, fit. For all Savage drop-in accurate, housing ensures and 16 rifles. 11, 12, 14 116 and 10, 114, #436-100-110AS #100-001-885AS #100-001-886AS #100-003-132AS #100-003-131AS #100-001-868AS #100-000-662AS #100-001-875AS trigger lever and trigger return spring replace the the spring replace trigger lever and trigger return sear for adjustability provide and parts factory model rifles with late engagement. Does not fit or lb. 2 of Choice System. Control Fire T-900™ 2.5 lb. pull weights. Lightens trigger pull and reduces - Lightens trigger pull and reduces AK-47 to help trigger slap of effects negative In accuracy. steady the gun and improve spring, double trigger return cludes trigger, hammer spring, disconnect, hook hammer, plate pin retainer trigger spring, disconnect lock agent. andthread crook), (shepherd 2 or 3 lb. pull weight. Choice of SPECS: available. weights gagement point to a precise location for more leverage that light leverage that more for location to a precise gagement point malfunctions eliminate Fewer working parts help ens pull weight. machined Precision temperatures. and freezing caused by moisture smooth, drag for surfaces help minimize and polished engagement without alteration. factory safety All models use the crisp let-off. installation. Drop-in IMFIRE KIT - Gives your early MARLIN 800/900 R a smooth, .17 or .22 caliber rimfire model Marlin consistent, 2 SPECS: rifles without T-900 trigger system. 2004 800/900 series rimfire 700 TRIGGER KIT - REMINGTON SPECS: GER M77 MARK II RU power plus a reduced Polished sear and trigger lever, movement and light spring smoothes trigger return sear engage ens pull to 2 pounds. Adjustments for a crisp, clean-breaking provide ment and overtravel posi provides screw, adjustment head, Elliptical feel. no special fitting for requires tive contact with safety; engagement. proper SPECS: weight. and 77/17. WMR, 77/22 - Fits Ruger 77/22, 77/17 & 77/22 trigger housing to achieve match-quality trigger performance. Uses trigger performance. trigger housing to achieve match-quality and sear engagement adjustments. over-travel for factory screws factory trigger components to deliver match-grade performance. performance. match-grade to deliver trigger components factory sear en 98) moves the Mauser (except designed, system Specially - - - 45.99 64.99 44.99 189.99 239.99 $ 64.99 $ 137.99 $ 249.99 ab ���������� ������������ ������������ �������������� �������������� ���������������� - - ab ���������������

������������������ ab ​4B58H88 " wide serrated trigger shoe. " wide serrated ​4B61H64 ​5A239E99 ​4B42Q56 ​4B43E01 16 TRIGGER ​5A246C76 / Remington Bench Rest (BR) Bench Rest Remington 3 ​2K123J83 ​5A189A99 Winchester Hunter Varmint Rifle Winchester Hunter Varmint Lightweight, all steel single-stage Lightweight, all steel single-stage that includes trigger, trigger, includes Speedlock Kit that Custom Triggers For MilitaryFor Rifles Triggers Custom fication instructions to shorten striker to shorten striker instructions fication faster lock time. for travel - Steel, blued, hardened Triggers SPECS: triggers with rolling sear block design triggers with rolling and overtravel adjustment for provide military rifles. pull weight (2 to 7 lbs.)for only or as as Mark II Trigger Available a spring, and modi cocking piece, striker N M70 NGTON 700/40X & WI REMI RHVR 700 Trigger, BR 700 Trigger, Speedlock Kit EN-5, WHVR M70 Trigger, Speedlock Kit EN-6, Trigger UM, Mark II Trigger GM, Mark II Trigger 700 Trigger, Rem N 700 NGTO REMI FLE TRIGGERS RI " striker travel and require bolt modifications. bolt travel and require " striker Reliable Trigger Pull Trigger Reliable 16 / 5 N TRAISTER DAYTO kit fits fits 1917 Enfield w/5-rd magazine, 1914 .303 Enfield, Enfield, .303 magazine, 1914 w/5-rd kit fits fits 1917 Enfield EN-5 JEWELL Pull Weight To Suit Your Needs Your Suit To Weight Pull JARD nstallation, Crisp Release, Choice Of Release, Crisp Installation, Internal Components - 440 stainless steel, hardened to Rc 58. 58. to Rc - 440 stainless steel, hardened Components Internal TRIGGER ASSEMBLY TRIGGER Steel, matte black finish. 14 oz. pull weight. oz. black finish. 14 Steel, matte Self-contained replacement trigger module Self-contained replacement Drop in replacement provides a smoother, a smoother, provides in replacement Drop Fully Adjustable, Finest Quality For A Light, For Quality Finest Adjustable, Fully Easy internals. 2 to 7 lb. adjustable pull weight. to 7 lb. adjustable pull weight. 2 internals. is designed exclusively for match shooting and does not have safety safety shooting and does not have match for is designed exclusively rifles, 700/40x Remington Fits wt. pull oz. 3 to oz. 1.5 release. bolt or actions. left-hand and right-hand and Post-'64 Winchester M70 rifles, right- (WHVR) fits both Pre- Connecticut. in New Haven, and left-hand actions, manufactured since 2008. rifles manufactured trigger group fit MOA It WILL NOT pull wt. Uses existing safety. to 48 oz. 1.5 oz. SPECS: (1.2mm) thick. Housing - 300 Series stainless steel sheet, .050" formance for benchrest, varminting, and other benchrest, for formance shooting. All internal compo precision types of extend to Rc 58 for heat-treated machined stainless steel nents are a nylon insert to maintain have Adjustment screws ed service life. Single-stage design locker. to thread your settings without resorting the barreled to remove the need is externally adjustable, eliminating or overtravel. let-off, the stock to adjust pull weight, action from safety lever top includes Rifle (RHVR) Hunter Varmint Remington pull wt. Fits Remington to 48 oz. 1.5 oz. and bottom bolt release. only. actions right-hand rifles, 700/40x fits Swedish 98 actions. GM fits Swedish UM fits Mauser 98 and commercial Wt. 2 oz. rifle to cock- and 93 to 96 Mausers. Speedlock Kits - All models convert on-open. magazine. kit fits same as EW-5 but w/6-rd EN-6 Rem. Mod 30 and 30S. provide Both provides outstanding reliability, function, and per outstanding reliability, provides #100-002-560AS #100-004-022AS #240-200-117AS #240-100-098AS #240-100-096AS #100-002-559AS #240-200-017AS SPECS: SPECS: age that lightens pull weight to only 14 oz. and is less susceptible to less susceptible is and oz. only 14 to weight pull lightens that age Fully temperatures. and freezing caused by moisture malfunctions and sear engagement. over-travel adjustable for crisper letoff and lighter pull weight than factory and lighter pull crisper letoff a achieve to way economical easy, An original. pull. Specially designed, two-lever custom trigger lever more engagement point for sear system has a repositioned #100-002-574AS " ------4 order on the web / 1 ab ab 91.99 109.99 $ 131.99 $ 109.99 $ 325.00 $ 239.99 ab brownells.com ���� ����

��������� ��������� ������������ TRIGGER ​2K82H55 �� ​2K99B06 ​2K99Q06 rade Performance Grade ​7B325L00 - - - ​2K118Q86 ​2K222F87 -

HOWA & S&W 1500/ HOWA Fully Adjustable; Fully ab MAUSER 98 MAUSER NING A-BOLT BROW NGUARD VA WEATHERBY JARD Pre-Set Pull Weight For Less Tuning Less For Pull Weight Pre-Set Reliable, Match Match Reliable, Provides a lightweight, crisp-breaking trig a lightweight, crisp-breaking Provides ADJUSTABLE TRIGGER ADJUSTABLE All-steel, single stage drop-in trigger pro All-steel, single stage drop-in JARD JARD ger that allows you to fully concentrate on each on each allows you to fully concentrate ger that sluggish trigger. a heavy, shot without wrestling installa drop-in for adjustable and ready Fully all steel, heat-treated tion. Precision-machined, grade perfor components give deliver match or 22 oz. in 12 oz. Available mance and reliability. vides adjustability not available in the factory vides adjustability not available is” with no extra tun be installed “as Can trigger. w/Safety, 12 oz. Trigger w/Safety, 22 oz. Trigger w/o Safety, 22 oz. Trigger Super SCAR Trigger, 22 oz., 1500 Trigger, Adj. Trigger, A-Bolt SUPER SCAR TRIGGER SCAR SUPER ADJUSTABLE TRIGGER SYSTEM TRIGGER ADJUSTABLE A Light, Clean Pull Clean Light, A Steel housing and internals, black, matte finish. Smooth finish. Smooth matte black, Steel housing and internals, Steel, blue. Fits Mauser 98 rifles only. Steel, black finish. Includes trigger assembly, lubricant, grip screw, grip screw, lubricant, Includes trigger assembly, Steel, black finish. Steel, matte black oxide finish. Approximately 2½ lb. pull weight. 2½ lb. pull weight. finish. Approximately black oxide Steel, matte Direct Replacement Gives Replacement Direct AUTOMATICS GEISSELE 16 & 17 SCAR fn Two-stage, non-adjustable trigger trigger non-adjustable Two-stage, This drop-in trigger replaces the fac trigger replaces This drop-in (6.4mm) wide trigger face. Fits Howa 1500, S&W 1500, and Weatherby and Weatherby 1500, S&W Fits Howa 1500, wide trigger face. (6.4mm) pull wt. 22 oz. Includes safety. Vanguard. without safety. model also available pull weights; 22 oz. SPECS: SPECS: ment, and minor changes in pull weight. Safety can be adjusted to can pull weight. Safety ment, and minor changes in is changed. Internals trigger motion as sear engagement eliminate maximum reliabil to provide machined and hardened precision are S&W Fits Howa 1500, consistent accuracy. more ity and crispness for rifles. Includes built-in safety. Vanguard and Weatherby 1500, SPECS: cal situation where a more sensitive, sensitive, a more where cal situation too light. trigger might be match-type is recommended Gunsmith installation may be required. as minor fitting SPECS: sear engage overtravel, for set screws ing, or can be adjusted with Fits FN SCAR 16 & 17 only. 17 & 16 SCAR FN instructions. Fits and complete has a 2.5 lb. first stage followed by a 2 by stage followed has a 2.5 lb. first lb. 4.5 a crisp, safe for Lb. second stage suited to close quarters, pull. Especially and any tacti mid-range shooting, #100-002-460AS #100-002-462AS #100-002-459AS #100-011-671AS Combat-Style Trigger For SCAR 16 & 17 16 SCAR For Trigger Combat-Style stalled. Trigger is adjustable for sear engagement and take-up. sear engagement and take-up. is adjustable for stalled. Trigger SPECS: Instructions included. tory unit to give your A-Bolt a clean-break tory unit to give your A-Bolt overtravel. or ing, 2½ lb. pull without creep to the Installs easily with no modifications in safety and comes with its own firearm #100-010-623AS #100-003-164AS - - - 75.00 99.00 $ 22.99 $ 49.99 $ 350.00 ​

re AK Trigger IWI TAVOR ​ ​

​ ��������������������

Single-stage triggers AK-47 A Smooth, Crisp Pull Smooth, A For Your Kalashnikov Your For duces pull to as low as low pull to as duces drop into Kalashnikov- drop give rifles and pattern and a crisp superior feel to help maximize break face Trigger accuracy. is shaped to improve and shooter comfort control. - - - ab ​8Z49Q99 ab 800-741-0015

������������������������������������������������ ���������������������������������������������������� ������������������������� ������������������������ �������������������������������������������������� replaces the factory trigger shoe and the factory trigger shoe replaces - - AK Triggers ® ALG Defense ALG G AK Trigger, G Enhanced AK Trigger, AL AL 8Z75M00 4H17G56 Trigger Stop Screws, 6-pak, Stop Trigger 7B350K00 eissele Super Sabra Tavor Trigger, Geissele Super Sabra Tavor Super Sabra Lightning Bow, 7B99A00 ab GEISSELE AUTOMATICS GEN 2 SUPER SABRA TRIGGER TRIGGER STOP SCREWS STOP TRIGGER Lightning Bow Item Long-Range Targeting Long-Range

Machined aluminum housing, Type III hardcoat anodized. S7 tool anodized. III hardcoat Machined aluminum housing, Type Steel. Includes spring. contains 6 screws and instructions. 6 screws contains Pak 8-32 tpi. 6 Drop-in replacement trigger gives replacement Drop-in Controls trigger over trigger Controls

Non-Marring Rubber Tips Rubber Non-Marring nhances Trigger Control For Precise Control For Enhances Trigger #100-017-370AS #100-017-371AS SPECS: SPECS: steel internal parts, hardened nitride finish. Fully compatible with all IWI compatible nitride finish. Fully parts, hardened steel internal rifles. Tavor ment. Nitride process finish on internal parts gives superb abrasion finish on ment. Nitride process resistance. rate distance shots, but forgiving enough for CQB. The first stage CQB. enough for distance shots, but forgiving rate tune the first/second stage weight so you can is user-adjustable, the total pull weight. First stage distribution without compromising pull 2 lbs. Total at is fixed lbs.; second stage can be adjusted to 3.5-5.5 lbs. The Super Sabra trigger to 7.5 5.5 weight can be adjusted from while installation, easy housing for aluminum an in contained is pack align the tool steel internal components held in correct keeping ger pull that gives you smoother, more more gives you smoother, ger pull that con Two-stage trigger control. precise allows the Super Sabra to be figuration accu for enough light and controllable your Tavor an upgraded, two-stage trig an upgraded, two-stage your Tavor works with the Super Sabra to produce a truly two-stage trigger with the Super Sabra to produce works the slack lets you remove A setscrew feel. pull with a match-grade feel a factory trigger mechanism, producing the Tavor common to the M4 Carbine. of very similar to that has a proprietary self-lubricating coat self-lubricating has a proprietary lbs. Enhanced AK Trigger 3.5 ing for superior lubricity and smoothness, and a lighter pull weight ing for AK Trigger. ALG than the standard SPECS: SPECS: SPECS: ger loop. Use on handguns, ger loop. Use rifles, shotguns. travel for clean let-off. let-off. clean for travel frame Rubber tips cushion mark trig “touch” and won’t

#084-010-006AS Orders/Tech: 100-018-588AS #100-014-905AS triggers rifle #837-100-772AS #837-000-002AS #837-100-722AS adjustable from outside thestockwithturnof a set screw. Mod .22 magnum,Hornet,77/44 and77/50. Gunsmithfittingrequired. eye -FitsallM77Hawkeyecenterfire rifles. 77/22 -Fits77/22 in.22LR, II centerfire varmint modelswith2-stagetrigger. riflesexcept VT Hawk Allen wrench, springseatFits RugerM77Mark andinstructions.MarkII- SPECS: els for RugerM77 for weightof pullfrom 1 #661-000-065AS recommended. slot for proper fit.Installation instructionsincluded.Gunsmith installation trigger pullweight. Requires minorinlettingof stockandtriggerguard SPECS: ity than the original push pin. Gunsmith installation recommended. unit secures tothereceiver withasteelboltandnutfor more stabil trigger shoegivesexcellent sensitivityandcontrol. Theentire trigger tightening thebrasslockingscrews. Wide,grooved, deeplycurved able byturningAllenheadscrews andthenlockingthesettingsby #713-000-015AS installation, mayrequire minorfitting. three of therequired partsfor compliancewiththe922law. Drop-in 8 lbs.,withatwo-stageorsingle-stagepull.U.S. made,qualifiesas pull weight anddisconnector engagement. Pull adjusts from 4 to adjustable for takeup, overtravel, trigger, anddisconnectorare fully SPECS: Fits allAK-47 andSAR-3 receivers. ry spring’s“crook” backintothereceiver. the frustration of tryingtogetthefacto TRIGGER PINETAINER PLATE -Saves ers. Includesdetailedinstallation instructions. Rc 56-58. Fitsmilledorstamped7.62x39, 5.45x39, AND5.56mm receiv SPECS: #713-000-017AS TRIGGER KIT Clean Breaking Trigger Helps SINGLE SETADJUSTABLE TRIGGER Competition-grade hammer, Improve Performance 17-4 stainlesssteel,darkgrey. .250"(6.3mm)shoe. Includes wide Steel, black,matte finish.Deepcasehardened andheat treated to Steel, blued. Steel, black,matte finish.

smoother-operating triggerwithnotake-up orover not overcoming along,heavy triggerpull.Adjustable travel. Letsyouconcentrate onmakingyourshotand Installs ADJUSTABLE MILITARY Increases accuracybyproviding alighter-feeling, ® MarkII, M77 77/22 Trigger, M77 Hawkeye Trigger, M77 MarkIITrigger, 1F183M84 M98 SingleSetAdjustableTrigger, AK-47 Trigger Kit, Trigger PinRetainer Plate, RED STAR ARMS 3 / NECG ADJUSTABLE TRIGGER 8 " wide shoe. 2to4 " wide pull weightor, whenyoupress theshoefor pre-travel, and overtravel are fully adjust set trigger. Pull weight, searengagement, ward, toanultra-light,clean-breaking 4oz. able conventional trigger witha2 to 4 ule upgradesaMauser98tohighlyadjust 1 Easily, Lightens & Smooths Trigger Pull / 2 to4lbs.Changesinletoff are conveniently SPEC-TECH RUGER Self-contained, dual-modetriggermod � Works ® MAUSER 98 Hawkeye ​7C89H16 PAGE Set Trigger Mode ab In Conventional Or ab 1 ​3A82H07 / - 2 " lb.pullweight with4oz. set ​7C89H16 ® , and77/22

​7C89A16 AK-47 � 162 ​3A4C99 � � � ® ® .

ab � ​ $ 199.00

$ 94.99 $ 84.99 94.99 94.99 $ 4.99 1 / 2 lb. ------factory searandsafety. SAV-1 usesfactorytrigger pull weight,searengagement andovertravel. Uses and reliable operation. Completelyadjustablefor tool steel,thenheat treated for consistent release SAVA SPECS: Does notfitM77MarkIIrifles. to 2lb.Simple,“drop-in andshoot”designsaves timeandeffort. a crisp,ultra-smooth,triggerpullthat canbeadjustedfrom 14 oz. on riflesequippedwithatangsafety. Produces adjustment capabilityof theoriginalM77trigger polished engagement surface enhances the RUGER M 77 SEAR-Hardened, steelsearwith - 2 on model.Rc50-55. Fitsright- orleft-handrifles.RU-MK II-14 oz. (397g) SPECS: M77 safety withnoalterations. RU-MK IIfitsallRuger ness. Adjustsfor weight of pullandusesthefactory help eliminate creep andenhanceoverallsmooth long-lasting reliability. Radiusground searsurfaces steel, then heat-treated and drawnto Rc 50-55for RUGER TIGGE - Investment cast from A-2 tool triangular springandE-clip. cludes safety lever, safety pivot pin,detent ball, SPECS: triggers. triggers andallpre-2006 Remingtonfactory the repair issolid.FitsallRifleBasixRemington place damagedorlostsafety partsandknow grade aftermarket partsyou can easily re -Withthesehigh- REMINGTON 700SAFETY - 1 tured2006 andlater. in Rightonly. hand pull weight: Adjustable L-1/L-1K 2006 &Later triggersfitRemington700and40Xmodelsonlymanufac Seven rifleswithoutX-MarkPro triggersandmanufactured priorto2006. 700,fit Rem pins. Pre-2006triggers and levers steel ened and Model 40X, SPECS: grade triggerpull. Precision machinedengagmentsurfacesbreak cleanfor amatch- curacy from yourriflewithoutdifficultfittingorhoursof tuning. 77/17 Model Sevenrifles. safety andboltrelease. FitsRemington700, 40X,andpre-2006 required for riflesmanufactured in2006and later, andinclude rifles retain thefactorysafety leverandboltrelease. Kmodelsare four weight-of-pull ranges.Modelsfor pre-2006 manufactured replaces thenon-adjustable triggerin77/22 #758-000-012AS #758-000-011AS #758-000-008AS #758-000-010AS #758-000-019AS #758-000-005AS #758-000-018AS #758-700-002AS #758-000-017AS #758-700-001AS 1 1 / / 2 2 Easy-to-install, reliable triggershelpyouachievethebestac STOCK # lb.to3LV-1/LV-1K -8oz. to1 RU-R - lb.(1.1kg). RU-R ® MarkIIrifleswith3-positionsafety. RU-R GE ® rimfire rifles. A-2 toolsteel,matte bluefinish.Rc50-55. A-2 toolsteel,matteor electrolessblue nickel finish,depending Housing -T6-6061aluminum,hardened. Machinedandhard Steel, nickelSteel, plated,Kit in silver finish. 10/110TRIGGER- Investment cast from CUSTOM RIFLE TRIGGERS Easy-To- drag andproduce asmoothfelt pull.Available in billet; provides greater internalclearancetoreduce chase. HousingisCNCmachinedfrom aluminum excellent feel, verticalgrooves givepositivepur fortable, .330" factory width, trigger shoe delivers travel that best suit your style of shooting. Com lets youselecttheweightof pull,let-off, andover REMINGTON 700 TRIGGER -Adjustabletriggerkit ab RU-T Sear, RU-R Trigger, RU-MK IITrigger, REM-SAF Safety Parts, 2006 &later Pre-2006 2006 &later Pre-2006 2006 &later Pre-2006 1 Install; Helps 1 / 2 FITS -3lb(.7-1.4kg). SATISFACTION GUARANTEED RIFLE BASIX ​8E36H06 1 ​8E87A54 / 2 Improve Accuracy lb.ERV-3/ERV-3K -4oz. to1 MODEL ERV-3K ERV-3 LV-1K LV-1 L-1K L-1 ​8E86A57 � SINCE 1939 � ​8E34K18 � - - ® and 8E126N06 8E147M07 8E138K04 8E149L43 8E115P56 8E168I09 - �

PRICE $ 149.99 $ 154.99 $ 126.99 $ 138.99 $ 191.99 $ 161.99 $ 99.99 $ 41.99 $ 37.99 90.99 SAV-1 1 / 4 lb. ------4oz. to3lb.IncludesvideoinstructionsonCD-ROM. 1 housing; pullweightisadjustablefrom 1 clean break of ahigh-quality, conventionaltrig with originalAccuTrigger™. Deliversthecrisp, trigger pullfor Savage rimfire riflesequipped treated, tool steel trigger provides a match grade SAVA tirgger. 10/110 seriesriflesmanufactured after 1966withstandard orAccuTrigger SPECS: with standard orAccuTrigger triggers. Savage 10/110 series rifles manufactured after 1966 places factorytriggerhousing.Bothmodelsfitall trigger pullweightispreset toapproximately 2to Wesson 1500, andMossberg 100ATR, righthandonly. WTHBY-1 erby Vanguard, Howawithboth2-and3-positionsafeties, Smith& trigger assemblywithoutalterations. FitsWeath smooth pull.Simpledrop-in fitreplaces factory steel internalcomponentsprovide aconsistent, is hardcoat anodized for durability. Hardened greater internalclearancefor reduced drag and CNC machined,aluminumhousingprovides crisp pull that requires no furtheradjustments. cision madetriggerisfactorypre-set for alight, WEATHERBY/HOWA/S&W/MOSSBER SPECS: fit, usesfactorysafety andtriggerhousing. tent release andreliable operation. Drop-in petition. Pullweightthat adjustsfrom 1 rimfires that’s perfect for hunting or com breaking, match-quality sear, for boltaction SAVA 1 SPECS: take-up, searengagement,pullweight(1 reliable operation. Fully adjustablefor optimal ger withconsistentseardisengagementand vides alight,cleanbreaking pull soyoucanconcentrate onhitting MARLIN RMFETR IGGER -Investmentcast,steel triggerpro instructions, adjustment screws, locknuts,andlubricant. SPECS: to 4pounds. weight of pullandovertravel from 10ounces safety; fully adjustable for searengagement, Cast andmachinedtriggerunitusesthefactory Model 70rifleswiththisdrop-in replacement. ger pullsonbothPre- andPost’64Winchester bye” tothoselong,heavy, glitchy, factorytrig to doaWinchester70triggerjob.Say“Good WINCHESTR 70-Theabsoluteeasiestway and Mossberg 100ATR. WTHBY-1 - 1 Vanguard, Howawith2-and3-positionsafeties, Smith&Wesson 1500, tool steel,hardened. Black,matte finish.Right handonly. FitsWeatherby SPECS: fit withoutmodification toactionorstock. lb.), and overtravel. Uses existing safety and pivot pin for adrop-in V - 12oz. to1 Striker handguns.Doesnot fitmodelswithAccu-Trigger. Target900 Magnum, .17 caliber,and .22 Rimfire503 and 502, plus501, from 4oz. to3lb.for target orhuntingrifles.Re own housingfor easytriggerinstallation. Adjusts SAV-2 features atwo-leverdesignenclosedinits varmint shootingorcompetition.Adjustablefrom 12oz. to1 lbs. downto10oz. Heat treated for consis #758-000-001AS #758-000-009AS #758-000-022AS #758-000-016AS #758-000-006AS #758-000-023AS #758-000-004AS 1 1 / / 4 2 - 4 lb. Fits Savage rimfire -4lb.FitsSavage rifleswithAccuTrigger. Includesinstructions. to4lb.WTHBY-V triggerpullweightispreset to16oz., idealfor GE GE SAV-1 - 1 Housing -T6-6061aluminum,hardcoat anodized. Internals -A-2 A-2 toolsteel.10oz. to1 A-2 toolsteel,black,matte finish.FitallSavage Steel, polishedsilverfinish..340" (8.6mm) wideshoe.Includes A-2 toolsteel,black,mattefinish. Pullweight from adjustable RIMFEADJUSTABLE TRIGGER-Heat RIMFESAR-Light,crisp- 1 / 2 lb.pullwt. 1 / 2 to3lb.Includesreturn springandinstructions.SAV-2 SAV-2 Trigger, SAV-1 Trigger, WIN-1 Trigger, SAV-R Sear, 8E81J08 SAV-RAT SavageRFTrigger, WTHBY-V Trigger, WTHBY-1 Trigger, � 1 / 2 ​8E81D08 lb.Fitsbolt actionMarkI, MarkII, 93 1 / ​8E85A39 ​8E148I54 2 ​8E85N67 lb.to4(1.8kg) pullwt.WTHBY- ​8E109L99 ​8E118B58 G - Pre 1 1 / � / 1 2 - - / 2 to3lb.

4 � -4 � � - - - - -

​ � � - 1 / 2 lb.andisfrom $ 133.99 $ 99.99 $ 99.99 $ 99.99 $ 99.99 139.99 159.99 Office/Tech: SAV-2 1 / 2 lb. - #837-860-011AS #837-860-032AS for target useonly. Gunsmithinstallation required. to 3lb.(1.3kg). SPECS: safety, replaces factorytriggerassemblywithnoalterations torifle. adjustment. Installation requires useof factory lever, and optional sear adjustment screw for creep new triggerspring,pivotpins,nickel plated trigger rifles upto3lb.for smallgamehunting.Includes adjusted from acrisp,light,12oz. for competition with your CZ 452. Trigger pull weight can be safely justment that’s idealfor competitionorhunting CZ 452-Allowsalarge rangeof pullweightad 12 oz. to2lb.MAR-917 - Adjustsfrom 14 oz. -2lb. SPECS: Fire Control System. fits allcurrent production, 900SeriesrifleswithT-900 or driftpin,triggerpivotpinconfiguration. MAR-917 T-900™) Marlinboltactionrimfire rifleswithascrew weight of pull.MAR-1 fitsallearlyproduction (pre gunsmithing. Adjustablefor searengagementand rounds. Uses thefactorysafety and drops-in without ment surfacessmoothanduniform for thousandsof your target. Heat treatment process keeps engage 77/44 and77/50 rifles. centerfire models,except .22Hornet.77/22 fitsallrimfire, .22Hornet, cludes triggerspring,springseat andinstructions.M77MarkIIfitsmost SPECS: from 3lbs.downto #758-000-021AS #758-000-007AS #758-000-013AS #100-002-493AS #100-002-494AS counts as three, U.S.-made parts—trigger, disconnector, and ham with U.S. Code Title 18 Section 922(r) part-source requirements. Kit wear resistance. MadeintheU.S.A. tokeep yourgunincompliance treated toRc45-48, withamilitary-typeblackoxide finishfor superb to finaldimensionsfor perfect fitandfunctionalreliability. Heat- rifle. Investment cast from 4140 tool steel, then precision machined trigger andhammerpinholes,sothere’s noneedtomodifyyour trigger group outsidethegun,theninstallitasaunit.Fitsfactory common toAK-47s. Innovative triggersleeveletsyouassemblethe eliminates painful “triggerslap” crisp 3to4lb.triggerpulland factory triggerprovides smooth, trigger, disconnector, triggersleeve,andhammer. SPECS: mer. Singleanddoublehookmodelsavailable. Quality U.S.-Made PartsFor SPEC-TECH RUGER Drop-in replacement for Reliability & Cleaner Trigger Pull TAPCO WEAPONSACCESSORIES Steel trigger, nickelplated, silverfinish.Adjusts from 12oz. (340g) 4140 steel,blackoxide finish.Hardened toRc45-48. Kitincludes A-2 toolsteel,matte bluefinish.Rc50-55. MAR-1 -Adjustsfrom Stainless steel,blue,matte finish..250"(6.3mm) wideshoe.In not pulling a long, heavy trigger. Completely ad pound soyoucanconcentrate ontakingtheshot, screw provides easyadjustmentof pullweight a smoother feel with a very clean break. Single set justable to remove creep and over travel. Provides TRIGGER GROUP 77/22 Trigger, M77 MarkIITrigger, CZ-452 Trigger, MAR-917 Trigger, MAR-1 Trigger, 5A28J25 Double-Hook Trigger Group, Single-Hook Trigger Group, Reduces weightof pulldowntoone-half 1 / 2

lb.withoutremoving from stock.Designed 641-623-5401 Light-Breaking Match Trigger For TARGET TRIGGER � Varmint & Target Rifles Improved ® M77 ​7C110L35 ​8E81F08 ​8E81D08 ​8E81J08 ® MARK II&77/22 ​7C110G35 � � � ab � 5A26H81

-

ab � AK-47 - � $ 114.99 $ 99.99 $ 99.99 $ 29.99 114.99

99.99 29.99 ® - - - rifle triggers $ 58.99 $ 85.99 $ 117.99 $ 217.99 $ 113.99 $ 113.99 $ 107.99 $ 112.99 $ 119.99 $ 119.99 $ 119.99 $ 119.99 $ 123.99 $ 139.99 $ 139.99 $ 139.99 $ 139.99 $ 139.99 $ 122.99 $ 122.99 $ 219.99 $ 219.99 $ 219.99 $ 219.99 $ 219.99 $ 219.99 $ 219.99 $ 219.99 $ 129.99 $ 219.99 $ 129.99 $ 219.99 $ 128.99 $ 134.99 $ 134.99 $ 124.99 $ 214.99 $ 149.99 $ 149.99 $ 149.99 $ 149.99 $ 144.99 163

PRICE 3H119I32 3H119I32 3H56P65 3H115I85 3H82N50 3H145J17 3H131F62 3H141F38 3H115F89 3H129L27 3H119E32 3H116K52 3H139K21 3H113B34 3H120A51 3H124L83 3H134E24 3H145G17 3H109L38 3H124A29 3H122P09 3H209A12 3H144C19 3H208L34 3H109A38 3H208J34 3H103B40 3H115M85 3H208F84 3H134N24 3H209D12 3H208B34 3H109D38 3H206D81 3H208P84 3H206H81 3H134Q24 3H124Q29 3H206G81 3H134M24 3H208D34 3H208H34 PAGE 1 1 ab 1½-4 lbs. 1½-4 lbs. 1½-4 lbs. 2-4 lbs. 1-3 lbs. 1½-3 lbs. 1-4 lbs. 1-4 lbs. 1½-4 lbs. 1½-4 lbs. 1-3 lbs. 1½-4 lbs. 1½-4 lbs. 1½-4 lbs. lbs. 8 oz.-2½ lbs. 8 oz.-2½ 2½ lbs. 8 oz.- 2½ lbs. 8 oz.- 2½ lbs. 8 oz.- 2½ lbs. 8 oz.- 2½ lbs. 8 oz.- 2½ lbs. 8 oz.- 1½-3½ lbs. 1½-4 lbs. 1½-4 lbs. lbs. 8 oz.-2½ lbs. 8 oz.-2½ - 2½ lbs. 8 oz. - 2½ lbs. 8 oz. 1½-3½ lbs. 1½-2 lbs. 1½-2 lbs. 1½-4 lbs. 1½-4 lbs. 1½-4 lbs. 1-3 lbs. 1½-4 lbs. 4-10 oz. 1½-4 lbs. 1½-4 lbs. 1½-3½ lbs. 1½-3½ lbs. PULL WEIGHT Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel FINISH Matte Stnls Matte Stnls Matte

No NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES SAFETY For Timney AR-15/M16 trigger modules, see trigger modules, see For Timney AR-15/M16 STYLE ness of operation and consistency of pull. Named and consistency of operation ness of Calvin Motley. Timney trigger designer after catalog. this of section AR-15 the - - — — — Featherweight — — — — — Sportsman Featherweight Deluxe Featherweight — — — — — — Featherweight Featherweight Straight Shoe Straight Shoe Straight Calvin Elite Calvin Elite Calvin Elite Calvin Elite Shoe Calvin Elite Strait Shoe Calvin Elite Strait Shoe Calvin Elite Strait Calvin Elite Straight Shoe Tactical — — — Calvin Elite Calvin Elite Shoe Calvin Elite Strait Shoe Calvin Elite Strait — — — — FITS - - Ruger M77 w/tang safety Ruger M77 Mark II Ruger M77 Mark II (left-hand) Actions (L461/L579/L61) “A” Sako since 1977, 10/110 (mfr’d Savage AccuTrigger) excluding since 1977, 10/110 (mfr’d Savage AccuTriggger) excluding Edge/Axis Savage Edge/Axis Savage rifles AccuTrigger Savage & bottom rimfire (excluding bolt release) rifles AccuTrigger Savage & bottom rimfire (excluding bolt release) Springfield M1903/03A3 Springfield M1903/03A3 Springfield M1903/03A3 Mark V American/ Weatherby Japanese Mark V German Weatherby Series 1 & Vanguard Weatherby Mossberg 2; also Howa 1500, S&W 1500 1500, Series 1 & Vanguard Weatherby Mossberg 2; also Howa 1500, S&W 1500 1500, Winchester 70 Winchester 70 Winchester 70 MOA Winchester 70 MOA Remington 700 (left-hand) Remington 700 (left-hand) Remington 700 Remington 700 Remington 700 (left-hand) Remington 700 (left-hand) Remington 700 Remington 700 Remington 700 (left-hand) Remington 700 (left-hand) Remington 700 Remington 788 Remington Model 7 Remington Model 7 Remington Model 7 Remington Model 7 Remington 7 Remington 7 Ruger American Centerfire Ruger American Rimfire Ruger M77 w/tang safety -nickel coatings for added smooth for coatings -nickel ® MFR # 651 652 611 611-16 401 416 402 402-16 520-CE16 520CELH 520CELH-16 520CE-ST 520CE-ST-16 520CELH-ST 520CELH-ST-16 501T 788 521 521-16 521-CE 521-CE-16 521CE-ST 521CE-ST-16 641C 640R 601 601-16 1100 1102 621 631 631-16 633 633-16 638 638-16 109 209 310 518 518-16 520-CE STOCK # STOCK models have wear components made from hard made from wear components Calvin Elite models have Timney triggers use the rifle’s origi triggers use Timney With the included spring; 2-4 lbs. if you retain the factory spring. With the included spring; 2-4 lbs. if you retain 1 #883-000-012AS #883-000-034AS #883-400-300AS #883-000-028AS #883-400-170AS #883-400-171AS #883-000-044AS #883-000-045AS #883-000-055AS 883-000-094AS 883-000-095AS 883-000-090AS 883-000-091AS 883-000-092AS 883-000-093AS #883-000-006AS #883-000-009AS #883-000-050AS #883-000-051AS #883-000-052AS #883-000-053AS 883-000-096AS 883-000-097AS 883-000-059AS 883-000-058AS #883-300-177AS 883-000-089AS #883-600-772AS #883-000-004AS #883-400-100AS #883-000-001AS 883-000-070AS #883-000-040AS 883-000-071AS #883-000-046AS 883-000-072AS #883-100-103AS #883-200-103AS #883-500-103AS 883-000-087AS 883-000-088AS #883-000-054AS nal mounting points, so there’s no drill so there’s points, nal mounting the or altering of ing, milling, machining, you to do. Some may require for receiver instructions the stock; of minor inletting it. Many you through included to walk shoe finishes—Blued, trigger with different available models are finish of the you match help Stainless—to or Matte Nickel-Plated, your rifle. with Teflon ened A2 tool steel the safety is on. A Timney safety is far less is far A Timney safety is on. the safety with came one that fail than the to likely your gun. - - - order on the web $ 58.99 $ 58.99 $ 85.99 $ 85.99 $ 58.99 $ 58.99 $ 58.99 $ 58.99 $ 58.99 $ 99.99 $ 99.99 $ 89.99 $ 89.99 $ 107.99 $ 107.99 $ 107.99 $ 107.99 $ 107.99 $ 107.99 $ 107.99 $ 123.99 $ 123.99 $ 123.99 $ 139.99 $ 139.99 $ 139.99 $ 139.99 $ 352.99 $ 103.99 $ 103.99 $ 103.99 $ 103.99 $ 134.99 $ 134.99 $ 322.99 $ 322.99 $ 149.99 $ 149.99 $ 149.99 $ 149.99 $ 149.99 $ 149.99 $ 149.99 brownells.com PRICE 3H81E70 3H81K70 3H56L65 3H96L53 3H56A65 3H56B65 3H99K43 3H99A43 3H144I19 3H134I24 3H96D53 3H99G43 3H82G50 3H56Q65 3H56Q65 3H56M65 3H56M65 3H82Q50 3H119E32 3H144F19 3H129J27 3H137F85 3H119B32 3H134J24 3H134J24 3H144P19 3H129A27 3H318K45 3H119H32 3H144D19 3H312B08 3H101G38 3H103B40 3H134D24 3H144Q19 3H100K08 3H337N59 3H144M19 3H103C40 3H103H40 3H103G40 3H103G40 3H103Q40 1½-4 lbs. 1½-4 lbs. 1½-4 lbs. 1½-4 lbs. 1-3 lbs. 1½-4 lbs. 2-4 lbs. 1½-4 lbs. 2-4 lbs. 1½-4 lbs. 2-4 lbs. 2-4 lbs. 1-3 lbs. 1-3 lbs. 1-3 lbs. 1½-4 lbs. 1½-4 lbs. 4-10 oz. 1½-4 lbs. 1½-4 lbs. 1½-4 lbs. 2-4 lbs. 2-4 lbs. 2-3½ lbs. 2-3½ lbs. 1-3 lbs. 2-4 lbs. 2-4 lbs. 3 lbs. (fixed) 3½ lbs. (fixed) 1½-4 lbs. 2-4 lbs. 1-3 lbs. 1½-4 lbs. 1½-4 lbs. 1½-4 lbs. 2-4 lbs. 1½-4 lbs. 1½-4 lbs. 4 lbs. (not adjustable) 1½-4 lbs. 1½-4 lbs. 1½-4 lbs. PULL WEIGHT N/A Black Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Blued Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel FINISH Matte Stnls Matte Stnls Matte NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES SAFETY All the triggers offered are adjustable for weight of pull: one full of weight for adjustable are offered All the triggers All Timney trigger modules have a machined billet aluminum machined billet a have trigger modules All Timney revolution of the adjustment screw typically equals about 1 lb. of pull typically equals about 1 lb. of the adjustment screw of revolution also each model). Many are instructions for weight (see included with a also available Many are and over-travel. pre- adjustable for when rod trigger movement with a steel blocks that built-in safety chined from hardened tool steel, with precision-ground and pol with precision-ground tool steel, hardened from chined do. to you for filing or fitting, stoning, surfaces—no contact ished ensure that tight tolerances enables exceptionally CNC machining so, every Timney trig Even your trigger. from absolute consistency in and calibrated assembled by a skilled craftsman ger is still hand the factory. it leaves action before an actual gun alloy or steel housing (not a casting) that holds all the moving parts the moving parts holds all that (not a casting) steel housing alloy or ma are components Internal other. to each relationship in precise STYLE ") Curved Shoe ") Curved Shoe ") Curved Shoe 4 4 4 / / / 1 1 1 - - Thin ( Curved Shoe Std Thin ( Curved Shoe Std Curved Shoe Std Thin ( Shoe Straight Shoe Straight Featherweight Deluxe Featherweight Featherweight Deluxe Featherweight Sportsman Deluxe Featherweight Sportsman Deluxe Featherweight Sportsman Sportsman Featherweight Featherweight Deluxe Featherweight — Featherweight Tactical Curved Shoe Std Sportsman — — — — — Sportsman Featherweight Featherweight Deluxe Featherweight Deluxe Featherweight Featherweight Featherweight — Featherweight — Sportsman — — —

FITS nstant Trigger Job Trigger Instant 800-741-0015

Remington 700 Remington 700 Remington 700 Remington 700 (left-hand) Remington 700 (left-hand) Remington 700 (left-hand) Remington 700 Remington 700 Mauser 91-4K Mauser 91-4K Short Action Moss. 100 ATR/MVP Lng Action Moss. 100 ATR/MVP Lng Action Moss. 100 ATR/MVP Mosin-Nagant Remington 600 Remington 600 Remington 700 Mauser 96 Swedish Military Mauser 96 Swedish Mauser Military 96 Swedish, 93/95 Spanish 96/Spanish 95 Mauser Swedish stock w/commercial Mauser 95/96 Custom Mauser 91-4K Mauser 95-6 Mauser 98K GEW Military Mauser 98 (FN Commercial, Interarms, H&R 300 Series, Yugo Brno, Mexican, Turkish, 400) Browning 48, Mauser 98 (FN Commercial, Interarms, H&R 300 Series, Yugo Brno, Mexican, Turkish, 400) Browning 48, Mauser 98 (FN Commercial, Interarms, H&R 300 Series, Yugo Brno, Mexican, Turkish, 400) Browning 48, Enfield 1917 (5-Rd Mag) 1917 (5-Rd Enfield FN SCAR 16 FN SCAR 17 Howa 1500/S&W 1500 Howa 1500/S&W 1500 IWI Tavor Mauser 98K GEW Military Mauser 98K GEW Military Arisaka 6.5 Arisaka 7.7 Arisaka CZ 452 (.22 LR/.17 Mach 2) CZ 452 (.22Mag/.17 HMR) CZ 455 CZ 550 CZ 550 Mag) 1917 (6-Rd Enfield n Modular Replacements For Replacements Modular In EY TRIGGERS NEY TIM MFR # Drop- 510THIN 512 512THIN 511 516 516THIN 517 517-16 205 306 610-S 610 610-16 307 500 500T 510 305 104 303 103 105 203 302 201 301 101 110 690S 691S 611 611-16 680 102 202 312 313 452L 452M 455 550 550M 111 ive An Give FactoryTrigger A pioneer of the all-in-one, drop-in trigger module, module, trigger drop-in the all-in-one, of A pioneer Models Timney was founded in 1946 by WWII veteran Allen Timney in 1946 by WWII Timney was founded

STOCK # STOCK

#883-000-032AS 883-000-085AS #883-000-027AS #883-000-031AS 883-000-086AS #883-000-029AS 883-000-082AS #883-000-005AS 883-000-083AS #883-000-030AS 883-000-061AS #883-000-048AS #883-000-049AS #883-000-025AS #883-000-013AS 883-000-078AS 883-000-079AS 883-000-080AS 883-000-081AS #883-100-791AS #883-500-595AS #883-100-595AS #883-100-298AS #883-500-791AS #883-500-298AS #883-100-398AS #883-200-398AS #883-500-398AS #883-200-298AS 883-000-064AS #883-000-056AS #883-000-057AS #883-000-047AS #883-000-015AS 883-000-069AS #883-100-115AS #883-100-104AS 883-000-043AS #883-000-020AS #883-000-016AS #883-000-014AS 883-000-068AS #883-000-019AS Orders/Tech: vides the closest thing to a custom trigger job in a box. thing to a custom trigger vides the closest smith trigger job out of the question. Timney’s modular approach approach Timney’s modular the question. out of smith trigger job could do. shooter upgrade something the average made a trigger company stills pro the family-owned later, Nearly seven decades to fill the need for a good-quality, easy-to-install, adjustable trigger easy-to-install, adjustable a good-quality, for to fill the need rifles and Enfield Mauser, many military surplus Springfield, the for purchased who Shooters time. the at market civilian the flooding a gun budget, making the cost of on a tight often these rifles were hammers/sears triggers gas system parts rifle #801-700-100AS #801-000-040AS #801-700-400AS alterations. Alsofits40XandXP-100 pistol.Standard-1 pull. Simpledrop-in fitreplaces factorytriggerassemblywithout sear surfacesreduce dragandprovide asmooth,consistenttrigger heavy recoil. Heat-treated steelinternalcomponentsandpolished oz. pullweight.Noprovision for safety installation. weight range.Requires originalfactorysafety. Competition-2to6 Serrated SPECS: XP-100 silhouettepistol,right- orleft-handactions. #981-000-004AS #981-000-017AS Marlin factorytrigger. Produced tominimumtoler two-piece designeliminates annoyingflopof the provide acrisp,clean2to3poundtriggerpull.Unique, 1894, 1895. engagement surfaces. FitsallMarlincenterfire,336, leveractionrifles; SPECS: installation requires completeactiondisassembly. hunters; helpsgiveCowboyshootersthat winningedge.Drop-in fit; ances, givesasafe, lighttriggerthat helpsimprove accuracyfor #100-000-522AS purchase, givesextrareach for easycocking of ContendersandEn SPECS: slips overthehammerspurandlocks inplace. cores equipped with a scope. May be mounted left- or right-hand; VOLQUARTSEN RUGER #930-077-010AS and polished.Includesaspecialsearspring. 440C stainless steel, surface-ground, hardened, sapphire honed mag. and.22Hornet. SPECS: Drop- Gives A Light, Clean Break, Without The “Flop” Precision, EDMtriggerandhandpolishedsear Greatly improves trigger pullandlet-off withnofittingrequired. STRATTON CUSTOMTHOMPSO N CETER Aluminum, anodized,Aluminum, 1 black. Carbon steel,matte blue,orstainlesssteel,brushedfinish(SS). ToolNickel,matteor steel.Blue, finish Hardenedsilver finish. Stainless steel.Hardened toRc83. FitsRuger77/22, .22LR,.22

11 In For Crisp,Light,Trigger Pull TRIGGER-HAPPY KIT / 64 TARGET SEAR " (4.3mm) wideshoe.FitsRemington700, 40X,andrear-grip WILD WEST engagement, overtravel, andpullweighttohelpen lock thescrews inplaceandholdtightevenunder head setscrews allowprecise adjustments;hexnuts sure acrisp,lighttriggerandthebestpossible.Allen Match Blue, Comp Rem 700/40X/XP-100 Trigger, SS, Std Rem 700/40X/XP-100 Trigger, Blue, Std Rem 700/40X/XP-100 Trigger, 1H99B99 Marlin Trigger-Happy Kit,Nickel, 1H99D99 Marlin Trigger-Happy Kit,Blue, TC Hammer Spur, 77/22 Target Sear, Match-grade triggersare fullyadjustablefor sear Adjustable Triggers

Shilen 700/40X/XP-100 ​7H139J59 ​7H139L59 ​7H100D18 Grade Triggers For Optimal Accuracy R Round, knurledpadfor non-slipthumb Provides Easy, Positive Cocking emingto 700 � � MARLIN HAMMER SPUR � 1 ® / PAGE 8 77/22 " (3cm) long, (3cm) " � � ​5K15M11 ​3Z32D21

® ab 164 ab 3 / � 8 � " (9.3mm)" diameter. ab

ab - ​

1 ​ / 2 to3lb.pull $ 105.99 148.99 148.99 $ 99.99 $ 16.99 $ 36.99 99.99 - - #713-000-163AS #593-245-000AS #100-000-129AS #593-245-008AS #593-245-006AS #593-245-002AS #593-245-001AS purchase toeasilycockexter clamps to hammer spur; gives added thumb purchase for safe cock SPECS: in placewithAllenscrews. Mayberight-orleft-handmounted. with lowmountscopes.Justslipoverthehammerspurandclamp nal-hammer riflesequipped SPECS: and handguns.Ambidextrous, mayrequire fitting. ing withmanyscope-equipped,exposedhammer, rifles,shotguns ACP CampCarbines. nal to keep yourCampCarbinerunningreliably. Fits 9mm and .45 stainless steelfor superbstrength that farexceeds thefactory origi placement for factory hammerstrutbridgeismachinedfrom billet 2456 fitsH&RTopper, N.E.F. HandiRifle,RugerBlackhawk.2458 fitsMar rimfirerifles. 2451 fitsWin.94/22.2452 fitsMarlinleveraction1957-1982. 2450Bore,Big and fits Win.94 IthacaX-Caliber, andHenryleveraction lin leveractionafter 1983. diameter. Hammerslot .508" (12.9cm) wide,.190"(4.8mm) high. #883-000-002AS and .22Hornet,plus77/17 provides acrisp2 SPECS: SEAR&SPRING TIMNEY RUGER Includes reduced powerreturn springandcompleteinstructions. for correct angleandengagement. pull. Searnotchissurfaceground Reduces Felt Weight Of Pull Knurled surfacegivesextra Hardened stainless steelsear Provides A Sure Stainless steel.FitsRuger Aluminum, blackanodized finish.1 Steel, matte blackfinish.1 Rifle Hammers NSIOS HAMMER EXTE HAMMER EXPANDER Hammer Strut Bridge 1 3A18G28 Camp CarbineStrutBridge, 2458 HammerExtension, 2456 HammerExtension, 2452 HammerExtension, 2451 HammerExtension, 2450 HammerExtension, Blk HammerExpander, Ruger 77/22Sear, / 2 lb.weightof Marlin Camparbi ne ab Grip On ® UNCLE MIKE’S ® SATISFACTION GUARANTEED 77/22 , 77/44 CARLSON’S Power Custom � - ® 77/22 ®

1 / &77/50 ® 4 " (3cm)long, , 77/17 ® in calibers .22 LR, .22Magnum incalibers.22 ​3H46K70 SINCE 1939 1 TM / Better-Than-Original High-quality, drop-in re 2 " (3.8cm) long, Cocking For . Mayrequire minorfitting. Replacement Part ® Positive, Non-Slip Knurled aluminumbar , 77/44 ​5E9B39

3 ​7K7Q78 ​7K7B78 ​7K7P78 ​7K7J78 ​7K7E78 / 8 Hammers

" (9.3mm) diameter. � ​ ab

� ® &77/50 � � � � � Exposed 3 / 8 " (9.5mm) $ 18.99 $ 47.99 $ 11.75 $ 8.49 8.49 8.49 8.49 8.49

ab TM - - - - #655-002-100AS #100-005-280AS #100-002-140AS #054-000-002AS hold thecylinderassemblyinplace. Threads through thegascylinderlockandintoto pressure tocycleriflesconverted.308/7.62mm ammunition. Thirty Improves gasseal,deliversreliable cycling. SPECS: O.D.). Mini-14including Target, prefixnumber serial (.625"with 581 or 580 barrel ber prefix 181andbelow(.562" barrel O.D.) .Willnot fitthenewMini-14, screwsstrap, bushing. gas and spring-loaded adjustment screw, andinstructions.Retainfactorytop SPECS: ty modelonMini-14 chambered in6.8 RemSPC. gas pressure onyourRuger ing simpletoolsandhelpsyoufinetunethe SPECS: swivels. Separate modelsfor Mini-14 andMini-Thirty . UseMiniThir Sling swivelholeacceptsmostloops,includingquick-detach from no-cycling for single-shotoperation, to wide-openshooting. the op-rod contacting the receiver duringhigh speed cycling. Adjust shock. Improves accuracy by reducing the internal harmonics of reduce battering of theop-rod, andprotect opticsfrom excess #930-000-019AS unaltered, factorytriggerguard. Fitsboththe.22LRand.22WMR. SPECS: ADJUSTABLE GASBLOCK ACCURACY SYSTEMS Adjust Returns Winchester100semi-autos tosafe operating condition. Steel gasblockreplaces factorypartus Mini Thirty modelalsofitsMini-14 in6.8 RemSPC. ® . Letsyouadjustthedistancebrass flies, Steel. Matte finish.5.125" (13cm)long. 1018 cold rolled steel,blackoxide finish. A2 toolsteel,inthewhite.Hardened toRc58. Steel, in-the-white.Includesgasblockbottom half,pipe, gas GAS CYLINDERSCREW PLUG Gas Pressure For Different Loads FULTON ARMORY NU-LINE by upto50percent. Drop-in installation; useinan exact angleof engagement.Reducesfelt triggerpull mer notchindividually, surfaceground toensure an Restores Dependable Operation VOLQUARTSEN Reduces Pull Weight To ImproveAccuracy Fully machinedfrom A2toolsteelwiththeham 1A141J17 New Mini-14/Mini ThirtyGasBlock, Win. 100GasPiston, Gas Cyl. ScrewPlug, Mini-14 GasBlock, 3Z38M30 Remington 597Target Hammer, and reliability. Maintainsbettergascylinder plugs toprevent gasleaks that impaircycling screw plug canalsoreplace later, valve-style GAS PISTON Ensures ProperGas Cylinder Function TARGET HAMMER Direct replacement for early-stylesolid ® � WINCHESTER 100 Mini-14 � Mini-14serial num with rifles fits model MINI-14 For Reliable Cycling ab ® orMini M1 GARAND ​1A142G65 REMINGTO 597 ​3K11N70 ​5E39A74 ab ® - /MINI THIRTY ab � � �

​

​ $ 149.99 $ 45.00 $ 49.95 149.99 $ 12.99 Office/Tech: ab ® - - - #100-001-733AS #100-002-329AS #100-013-743AS time by letting you adjust the gas vol cations totherifle.Includesadjustment toolandinstructions. SPECS: group. Available for M1Garand,M1A,andM1ASOCOM rifles. op rod, boltlugs,receiver andtrigger ent ventsizes. Reducesbattering on eliminates changingscrews for differ of ventsize withintegralset-screw; ume inthecylinder. Quickadjustment #100-005-283AS #817-030-400AS hardness tomaintaincriticaltolerances,resist wear, andhelppre affecting accuracy. consistent accuracy. Lets you sling up tightly without sling pressure free float thebarrel assemblyfor handguard bandasingleunitto makes thegascylinderandfront (1.3cm) pistondiameter. 1.7 oz. (48.24g) wt. SPECS: quiring lessfrequent cleaning. polished surfacereduces frictionandresists carbonbuild-up,re vent rounding of thegasgrooves for extended servicelife. Micro- SPECS: #100-005-281AS rear cylinderplay. rifle. Installoneormore shimstogetatightfitandeliminate front/ align thebarrel andgascylinderportswhenaccuracy-tuningthe thickness. SPECS: Cylinder Increases Accuracy Unitized Front Band & Gas Vented steeldesignchangescycle Precision-machined, stainless steel piston is heat treated for Solid, welded construction NATIONAL MATCH GASCYLINDER Saves Wear On Bolt Lugs& Softens Blow On OpRod Steel, parkerizedSteel, no modifi nut with Replacesgas finish.existing Steel, blue.FitsM14/M1A. Stainless steel.Setcontainseach of one .005", .010", and.015" 420 stainlesssteel,polishedfinish.3.620" (9.2cm) longx.497" SPRINGFIELD ARMORY ADJUSTABLE GASSYSTEM FULTON ARMORY FULTON ARMORY GAS CYLINDERSHIMS ab 5K53J68 M1A SOCOM Adj.G as System, M1A Adj.GasSystem, M1 Adj.GasSystem, M14/M1A GasPiston, N/M GasCylinder, Gas Cylinder ShimSet, SCHUSTER M1/M1A

GAS PISTON 641-623-5401 � � Movement For ab Stainless steelgascylindershims Helps Eliminate

- - ​7A102N05 M14/M1A M14/M1A Micro-Polished Surface ​5K35M29 Resists Wear & Carbon ​3K36M03 ​5K53P68 ​3K15J19 M14/M1A Improved Accuracy Build-Up Gas Cylinder �

� ​ � � � $ 114.99 $ 39.99 $ 39.99 $ 15.99 56.99 59.99 ab - - - rifle gas system parts recoil lugs barrels - centerfire - - - $ 44.99 $ 271.99 $ 343.99 165

6.5mm/1-8 7mm/1-9 .30/1-10 .30/1-12 .338/1-10 CAL./TWIST ����������� ������������� ab �������������� IRE FIRE PAGE ​1D40L56 ​7H254P85 STOCK # STOCK - /SHILEN ab #787-000-003AS #787-950-728AS #787-950-730AS #787-000-004AS #787-000-028AS

ab SHILEN NGS COATI NA-TEK DY BARREL BLABARREL NK

.22/1-8 .22/1-14 6mm/1-8 6mm/1-10 6mm/1-14 .17 CF Barrel Blank, Dyna-Bore Coat Kit, Coat Dyna-Bore A-BORE COAT KIT COAT NA-BORE DY CAL./TWIST Select Match Barrel, 7H322H39 Select Match SELECT MATCH BARREL SELECT MATCH .17 CALIBER CENTER Fouling Buildup, Buildup, Fouling Delivers Outstanding Accuracy For Varminting Superb Stainless Steel Barrels For Top Accuracy For Top Barrels Superb Stainless Steel lb. (1.9 kg) wt. kg) lb. (1.9 416 stainless steel. 1-10" twist. 1.250" (3.2cm) O.D. with #5 con O.D. stainless steel. 1-10" twist. 1.250" (3.2cm) 416 4 416 stainless. #7 contour only 28" (71.2cm) long. (See Shilen chart stainless. #7 contour 416 1 fl. oz. (30ml) Dyna-Bore Coat, 1 fl. oz. Alcohol Clean, and instructions. Clean, Alcohol 1 fl. oz. Coat, (30ml) Dyna-Bore 1 fl. oz. / 1 asy & Fast Easy & Cleaning Makes STOCK # STOCK Hand chosen for the ultimate in accuracy. Button rifled, stress Button rifled, stress in accuracy. the ultimate Hand chosen for Chemical bore treatment produces a produces treatment Chemical bore breech from inside uniformity extremely-close, Button rifled for Permanent Bore Treatment Reduces Reduces Treatment Bore Permanent SPECS: SPECS: dimensions). for relieved, hand lapped, air gauged and optically inspected to ensure and optically inspected to ensure hand lapped, air gauged relieved, means That category. each one falls within the Select Match that to within bore over the entire specs and uniform of within .0003" or chambered. Not threaded .0001". #787-000-001AS #787-950-722AS #787-000-029AS #787-000-002AS #787-950-724AS — Advise # — pable of the highest accuracy for hitting the smallest targets at long at targets smallest the hitting for accuracy highest the of pable accuracy to “shot-out” rifles or putting restoring for range. Perfect stainless on a new custom gun. Stress-relieved barrel a premium 1.250" diameter Measures and durability. strength ultimate steel for contour. with a #5 breech at ing, so you can shoot more and clean less shoot more ing, so you can lead, When you do clean, carbon, often. sabot fouling and plastic wad or copper, typi A bore. untreated an from than easily more much out come to with wet and dry patches passes only a few cal rifle may need shots. of firing hundreds metal, even after to the bare down get harsh or brushes, steel bronze/stainless with scrubbing hard No solvents. For black powder shooters, and lead removing copper- benchrest for and buildup, ring” “carbon eliminates Coat Dyna-Bore the time- by eliminating break-in shooters, it simplifies initial barrel in breaking every shot when after cleaning consuming method of completely clean following bore get the Easy-to-apply: a barrel. then solution, apply the alcohol prep the kit’s instructions included, Dyna-Bore loose-fitting patch. using a solution Coat the Bore apply 8-10 rounds) (after and once cured bonds molecularly to the barrel, of point on velocity, thick, so it has no effect is only .25 microns the of the useful life will last One application size. impact, or group 5-6 long guns. of the bores Enough to coat bore. SPECS: SPECS: 4 tour. SPECS: SPECS: permanent, significant reduction in foul reduction permanent, significant of and uniformity-tolerances to groove- to muzzle. Adherence ca are guarantees these barrels respectively, and .0003" .0005" #787-917-105AS #100-006-145AS - - - 36.95 $ 6.96 $ 56.99 $ 34.99 $ 83.99

����� 1-9 1-10 1-10 1-10 TWIST " (11.1mm) dia., 16 ab / 7 ab ����������������� ������������������ ​8K29C65 �������������������������� TALLEY

​4G6B12 ​8K32M67 Distributes Recoil; Distributes Recoil; Adds A Custom Touch Adds ​9A50H03 ab RUGER #1 RUGER " (3.5cm) long. Heads " (3.5cm) 8 / CALIBER 3 NUM CROSSBOLT MAG .25-06 Rem. 6.5x55mm .308 Win. .30-06 ab ���������������������������������������������������������� Blued CM Oversized Lug, Blued CM Oversized Lug, SS Oversized #1 Accurizer, Magnum Crossbolt, Short Chambered Mauser 98 Barrel, 1A82L03 ACCURIZER " (6.3mm) dia., 1 " (6.3mm) 4 / 1 The Final Accuracy Step For For Step Accuracy Final The S N SOLUTIO TACTICAL High Quality, Value Priced, Ready To Install To Ready Priced, Value Quality, High uns Trued With Manson Tooling Manson With Trued Guns Steel, blue finish. 1.28" (3.2.cm) long, .74" (18.9mm) wide, .51" wide, .51" (18.9mm) long, .74" Steel, blue finish. 1.28" (3.2.cm) . 1.813" (4.6cm) (4.6cm) (SS). 1.813" moly (CM) or stainless steel Blued, chrome 4140 chrome moly steel, in-the-white. 1.1"-12 tpi; “V”- type thread. moly steel, in-the-white. 1.1"-12 tpi; “V”- type thread. chrome 4140 HICKS DESIGNS OVERSIZED RECOIL LUG RECOIL OVERSIZED STOCK # STOCK Extra-thick lug with a bore diameter that’s .010 .010 diameter that’s with a bore Extra-thick lug Distributes recoil on heavy magnums. Heavy-walled tube goes magnums. Heavy-walled on heavy Distributes recoil impact shift as barrel point of to prevent the barrel Stabilizes moly bar chrome 4140 ready-to-install, grade, Factory last! At " (3.2mm) thick. Machined steel, in-the-white. thick. Machined steel, " (3.2mm) Fine Tune The Barrel For Consistent Accuracy For Consistent Barrel The Tune Fine 8 SHORT CHAMBERED MAUSER BARREL MAUSER SHORT CHAMBERED / SPECS: SPECS: thick. (6.35mm) .250" bore. (2.74cm) long. 1.077" larger to fit barrels with oversized thread dimensions thread with oversized to fit barrels larger to lift Tapered Manson Tooling. Dave actions trued with to match required. the bedding. Gunsmithing easily out of #100-000-813AS #100-000-812AS SPECS: SPECS: diameter (1.5cm) .57" breech, diameter at (61cm) long, 1.15" (2.9cm) 24" muzzle. at 1 signed heads. With sharp, squared edges for clean inletting. Finish edges for signed heads. With sharp, squared contours. stock to match Tube SPECS: required. the forearm ment. Only minor inletting of SPECS: high. Includes instructions. (13.2mm) puts a custom-built sporter on a price that in popular calibers at rels length is Compact, 24" a Mauser 98 action within everyone’s reach. button-rifled, fast-handling hunting rifles. Stress-relieved, for great and fully crowned, short chambered, are right-hand twist barrels to do is finish chambering, set the headspace, All you have threaded. and polish and blue the exterior. inside the stock, secures between two “bolts” with specially de between two “bolts” with specially inside the stock, secures extension and to receiver attaches bedding block up. Steel heats move barrel to regulate gives you an adjustable tensioning screw #080-000-377AS #080-000-374AS #080-000-376AS #080-000-378AS — Advise # — #419-100-001AS #874-005-000AS " - - - - order on the web 16 / 13 13.99 35.40 34.99 $ 13.99 ab $ 32.99 $ 29.99 $ 38.99 � ��� brownells.com natural (SS), natural ​

xtra Strength Extra - ​ ​

​8D27M17 �� ������������������

​

​8D32G64

ab

NGTON 700 REMI ​6C30F71 RECOIL LUG RECOIL ���������������������������������������������������� ������������������������������������������������� ������������������������������������������������������� ������������������������������������������������������� 410 stainless steel, natural finish. 1 410 stainless steel, natural SAVAGE 110 SAVAGE N 700 NGTO REMI Oversize, lug replaces the stamped, factory lug replaces Oversize, Designed For Precision Rifle Builds Designed For Machined For Uniformity & Uniformity Machined For Extra-thick, precision-ground recoil lug has lug recoil precision-ground Extra-thick, Savage Barrel Lock Nut, Blue, 5E11C48 Savage Barrel Lock Nut, SS, 5E12Q79 SPECS: SPECS: part that tends to be slightly thicker at the bottom at tends to be slightly thicker part that added strength thick for the top. .240" than at lug fits Standard flatness. for and surface ground lug fits 1.125" bore Large shanks. barrel 1.060" shanks. diameter barrel Lug, CM Maximized Recoil Lug, SS Maximized Recoil 1.060" Savage Recoil Lug, Savage Recoil 1.060" 6C28Q74 Lug, 1.125" Recoil Remington 700 Recoil Lug, 700 Recoil Remington 2D33M42 mizes movement in the stock, along with tapered along with tapered movement in the stock, mizes allow easier removal corners that sides and rounded back and Front tightly-bedded installations. from added surface area that enhances stability and mini that added surface area SHARP SHOOTER SAVAGE SHARP mproved Accuracy Improved ab nhanced Recoil Control & Control Recoil Enhanced For New Barrels Or Repairs Barrels New For SAVAGE RECOIL LUG N RECOIL COMPETITIO ab BARREL LOCK NUT LOCK BARREL Blue or stainless steel. in-the-white or stainless steel moly (CM), in-the-white or Chrome 17-4 stainless steel, natural color. .250" thick. Gunsmith installa .250" thick. Gunsmith color. 17-4 stainless steel, natural MAXIMIZED RECOIL LUG RECOIL MAXIMIZED NN Y HILL SU Genuine, factory barrel lock nut fits all fac lock nut Genuine, factory barrel N ARMAMENT PRECISIO Machined slightly thicker than the factory part than thicker Machined slightly tory and aftermarket Savage barrels with 1.062- barrels Savage tory and aftermarket and marred or replace installations new barrel Use for 20 threads. appearance. new-in-box rusted parts to give your rifle that SPECS: #855-000-282AS #855-000-281AS (4.6cm) long, .240" (6.1mm) thick. 1.060" (2.7cm) and 1.125" (2.9cm) bores. and 1.125" (2.9cm) (2.7cm) thick. 1.060" (6.1mm) long, .240" (4.6cm) are ground to within .0001" uniformity to ensure perfect alignment perfect to ensure uniformity to within .0001" ground are accu maximum for between a “blueprinted” action and the barrel racy potential. SPECS: tion recommended. rel fit. Factory barrel installation may require setting the shoulder setting the may require installation barrel Factory fit. rel forward. SPECS: for added stiffness to eliminate lug flex or twisting lug flex or twisting stiffness to eliminate added for the similar to dimensions are Inner and outer recoil. under heavy to bar seamless receiver a smooth, dimensions for original, factory #848-000-005AS #436-000-002AS finish. 1.72" (4.37cm) long, 1.35" (3.4cm) wide, .240" (6.10mm) thick. 1.064" thick. 1.064" (6.10mm) wide, .240" (3.4cm) long, 1.35" (4.37cm) finish. 1.72" 700. Fits Remington I.D. bore (2.70cm) #436-000-001AS #848-000-004AS #100-013-086AS - - - 42.99 $ 37.99 $ 39.99 $ 38.99 $ 42.99 ab

ab ������ ������ ��������� ������������ �������������� n Replacement Replacement In ​3K38B96 ab ​6A34E67 ​3K42P99 M14/M1A M14/M1A ​3K36K72 ​3K32I72 nstallation Installation NGTON 700 REMI 800-741-0015 1.75" (4.4cm) long, .230" (4.4cm) - 1.75" Standard Gunsmithing " (16.5cm) long. long. " (16.5cm)

2 Easy / RECOIL LUG RECOIL 1

mproved Recoil Control Improved Recoil Double-disk ground for uniformity, provides provides uniformity, for Double-disk ground Requires No Requires HOLLANGTON/SAVAGE ND REMI ab Rem/Savage Recoil Lug, Recoil Rem/Savage M14/M1A Spring Guide, M14/M1A M14/M1A Spring Guide, M14/M1A Standard Recoil Lug, Standard Recoil Lug, Overbore Recoil improved accuracy by spreading recoil force over force recoil accuracy by spreading improved within shank won’t bind Tapered area. a larger OVERSIZED RECOIL LUG RECOIL OVERSIZED ANCE N ORD BADGER SADLAK INDUSTRIES Reduces Friction, Stops Mag Catch Failures Catch Mag Stops Friction, Reduces

Steel, black-oxide finish. 6 Steel, black-oxide 17-4 Stainless steel, Rc 42-44. 1.79" (4.5cm) long, .250" (6.36mm) long, .250" (6.36mm) (4.5cm) 1.79" 17-4 Stainless steel, Rc 42-44. Stainless steel, natural finish. Stainless steel, natural 8620 hardened tool steel, Mil-Spec manganese phosphate finish. tool steel, Mil-Spec manganese phosphate 8620 hardened NG GUIDE SPRI NG ROD OPERATI Solid, one-piece design features four milled flats to reduce weight to reduce milled flats four Solid, one-piece design features Hardened, tempered, one-piece, steel spring guide stands up steel spring guide one-piece, tempered, Hardened, Straight, non-tapered, stainless steel recoil lug stainless steel recoil non-tapered, Straight, NG GUIDE SPRI NAL-MATCH NATIO

Standard Or .015 Overbore; .015 Standard Or Without ModifyingWithout Stock; Improves Accuracy Smoothes Operating Rod Functioning Drop- Functioning Rod Smoothes Operating thick. Fits Remington 700 and Savage 110. Gunsmith installation required. Gunsmith installation thick. Fits Remington 700 and Savage 110. SPECS: SPECS: SPECS: SPECS: nate magazine catch failures. Guide body is turned to .344" diameter. to .344" diameter. Guide body is turned failures. magazine catch nate broken means no more magazine catch Integral, CNC-machined your range work. through welds or bent stampings halfway bedding. Drilled for lug retaining pin (included). Factory barrels will barrels pin (included). Factory retaining lug bedding. Drilled for shoulder set forward. the recoil need to have and friction for smooth operation and long service life; helps elimi life; and long service smooth operation and friction for #403-150-100AS #100-001-328AS SPECS: SPECS: to wear and warping for improved cycling. Cylinder rod provides provides rod Cylinder cycling. improved for to wear and warping binding problems; with the spring to diminish contact 360-degree easily. part installs drag. Drop-in spring fluted to reduce

#093-000-015AS Orders/Tech: required. stallation SPECS: size matches matches Standard size consistent accuracy. for ing during recoil thickness. Overbore has the overall factory lug dimensions, except is .015" I.D. bore except size, same basic dimensions as the standard in Gunsmith dimensions. thread oversized with barrels fit to larger - Overbore I.D. bore (2.69cm) 1.062" O.D., (3.3cm) thick, 1.3" (5.85mm) I.D. bore (2.73cm) 1.077" fits most factory stocks and full-length aluminum and full-length aluminum fits most factory stocks without time consuming alterations. bedding blocks than the factory part to be slightly thicker Engineered improved flexing for prevents added stiffness that for superior centerline track for flat perfectly Surface ground accuracy. #078-000-030AS #078-000-029AS barrels - centerfire rifle until headspaceisperfect. (ReamerandHeadspaceGaugesre short. After installation, use a hand-turnedfinish reamer to deepen 93-96 intoasporter. Already threaded withthechamberleftslightly thread. 25"(63.5cm) long. SPECS: 26" (66cm)long SPECS: rounds. HandloadsMUSTNOT exceed SAAMIspecs. ing themshouldbefired onlywithstandard, factory-equivalent rels listedare chambered for lowpressure cartridges.Gunsus NOTE: quired.) Madetoourspecifications byShilen. #801-135-143AS #801-136-104AS #801-136-102AS #801-138-107AS #801-138-105AS #801-138-104AS #801-128-092AS #801-175-092AS #801-178-093AS #801-127-104AS #801-127-103AS #801-126-104AS #801-126-103AS #801-126-102AS #801-125-103AS #801-124-103AS #801-275-092AS #801-265-092AS #801-225-102AS SPECS: sively smoothandpolishbore. polishing. Eachcaliberkitincludes10bullets,infivegritstoprogres suming. Longbulletsprovide maximumbearingsurfacefor efficient #840-000-007AS #840-000-006AS #840-000-005AS #840-000-004AS #840-000-002AS #840-000-001AS ITTED BARRELS FORSMALLRING MAUSER 93-96 FITTED Short-Chambered & Threaded To Fit MostLarge& Small Ring Actions OR LARGE RI NG MAUSER 98 BARRELS FORLARGE FITTED A “nolathe” waytoturnasurplusLarge Ring98orSmall STOCK # STOCK # STOCK # Chrome.980"steel. moly .645"x diameter thread. “V” tpi, 12 - long, 50 bullets.Plasticstoragebox. Instructionsincluded. These actionsare notasstrong astheMauser98. Thebar Chrome molysteel.1.1" diameterx.625" type long,-12tpi,“V”

ITTED MAUSER BARREL FITTED SUPERIOR SHOOTINGSYSTEM FINAL ISHSYSTEM™ .35 Whelen .30-06 .30-06 .308 Win. .308 Win. .308 Win. .280 Rem. 7x57mm 7mm-08 .270 Win. .270 Win. .25-06 Rem. .25-06 Rem. .25-06 Rem. .257 Rob. .243 Win. 7 x57 6.5mm x55 .250 Sav. CALIBER CALIBER .308 rifle .284 rifle .264 rifle .270 rifle .224 rifle .243 rifle CALIBER IST TW IST TW 10 9 9 ab WEIGHT(GRAINS) 10 14 10 10 10 10 10 9 9 9 10 10 10 10 10 10 cleaning easierandlesstimecon lead andcopperfouling andmakes Eliminates theprimarycauseof marks, rough areas andhighspots. bore andthroat toremove tool Polishes Bore, Reduces Fouling,

PAGE CONTOUR Abrasive coated bulletspolish CONTOUR Gives 190 130 107 142 135 /SHILEN 80 #2 #2 #2 #4 #4 #4 #4 #2 #2 #2 #2 #3 #3 #3 #3 #3 #3 #5 #7

Easier Cleaning 166 ab 7H266P50 7H283B54 7H266M39 7H266Q39 7H283Q54 7H266N50 7H277M90 7H266C39 7H283H54 7H266N77 7H266A39 7H283A54 7H283P54 7H266E39 7H266J39 7H266F39 7H266F39 7H283I67 7H283I54 4H34M99 4H34D99 4H34B99 4H34J99 4H34J99 4H34L99 PRICE PRICE PRICE $ 284.99 $ 299.99 $ 299.99 $ 284.99 $ 284.99 $ 299.90 $ 299.99 $ 299.99 $ 299.99 $ 299.99 $ 299.99 $ 283.99 $ 283.99 $ 283.99 $ 283.99 $ 283.99 $ 283.99 $ 283.99 $ 283.99 $ 34.99 $ 34.99 $ 34.99 $ 34.99 $ 34.99 $ 34.99 - - - - - #119-000-094AS #119-000-096AS #119-000-095AS SPECS: not require headspacing.AllNFA rulesapply. using aTorx T25and62in-lbtorque wrench. Readytoshoot-do suppressor already mounted.Barrel assembliesare easilyinstalled with the front sight, gas block, gas regulator, gas piston, and flash blies feature Mil-Spec chrome linedbarrels. Eachassemblycomes grooves overwhichthegunsmithhasnocontrol, that candeter it istheinsidesof abarrel, that verysmallandvitalarea of landsand any straighterthantheaccuracycapabilityof thebarrel used.And, attention todetailof themastermachinistwillnotmake agunshoot grooves bythe“cold forming” process usingcarbidediesmadein barrels, eitherchrome molyorstainless,are rifledwithsixlandsand the Brownells Barrel, madefor usbyShilen,willdojustthat! Shilen that whichwillenlarge yourstature withyourtrade.And,wefeel that we are introuble! Bigtrouble!! We mustneversellyouanythingbut on thelinebyoffering youbarrel blanks. Theyhave gottobegoodor a request. he isjeopardizing yourreputation asagunbuilderbymakingsuch and orders “justanyoldbarrel solongasit’scheap.“Furthermore, for a custom gun is shortsighted indeed, if he starts economizing But, bythesametoken, thecustomerwillingtospendmoney looks”. mine whetherthefinishedworkof artisfor shooting-or“justfor .458-14 .375-12 .358-14 .338-10 .30-12 .30-10 7mm-11 7mm-9 .270-10 6.5mm-9 .257-10 6mm-10 .22 Rim-16 .224-14 .224-12 .224-9 .204-12 BORE & IST TW SCAR 16S&17SBARREL ASSEMBLIES Made from coldhammer-forged steel, thesecompleteassem All thelovingcare of thebeststockmaker andthemeticulous We, asyoursupplier, are layingourreputation (andyours,too!) Craftsmanship .notpricedeterminesthequalityof abarrel. Hammer-forged carbonsteel,chrome-lined. #787-284-090AS #787-264-090AS #787-224-090AS #787-000-015AS #787-458-140AS #787-308-100AS #787-243-100AS #787-308-120AS #787-224-120AS #787-338-100AS #787-284-110AS #787-358-120AS #787-257-100AS #787-375-120AS UNTURNED BLANK CM BLANK $158.99 NA NA NA Easily To Install& Ready To Shoot

9A1262A07 SCAR 17SBarrelAssembly, 13", 9A1129I66 SCAR 16SBarrelAssembly, 14", 9A1129C66 SCAR 16SBarrelAssembly, 10", #787-928-090AS #787-926-090AS #787-000-016AS #787-922-090AS #787-924-100AS #787-930-100AS #787-930-120AS #787-922-160AS UNTURNED BLANK SS BLANK $238.99 NA NA NA NA NA NA NA NA NA SATISFACTION GUARANTEED FNH USA

� #787-224-140AS � � � #787-222-160AS 28" LONG $158.99 NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

SINCE 1939 #787-284-091AS #787-308-101AS #787-257-101AS CONTOUR #1 $191.99 CM NA NA NA NA NA NA NA NA NA NA NA NA NA NA

​ ​ ​ #787-284-092AS #787-308-102AS #787-224-142AS #787-243-102AS #787-270-102AS #787-338-102AS #787-257-102AS CONTOUR #2 $191.99 $ 1129.99 CM NA NA NA NA NA NA NA NA NA NA

1262.99 1129.99

BARREL .bySHILEN

#787-928-092AS #787-924-102AS #787-930-102AS #787-925-102AS #787-927-102AS - - CONTOUR #2 $271.99 NA NA NA NA NA NA NA NA NA NA NA NA SS #100-005-288AS with afinishreamer untilcorrect headspaceisachieved. comes short-chambered—after installation, completethechamber a durable,Parkerized exteriorfinish. Bore has1-10"twistrate and moly steel andfully threaded, with button-cut 4-groove riflingand chrome lined.24" long.1-10"twistrate. Short-chambered for .30-06. SPECS: produce -butvastlygreater inqualityandultimate performance. quality andreputation bemaintained.Slightlymore expensiveto process againandbored toalarge caliber. Innootherwaycan Any barrel evenslightly“suspect”isstartedthrough theproduction barrels are handlappedat thefactory. and allbarrels are completelystress-relieved. ALLstainlesssteel(SS) within .0005" anduniformity within.0003" Nostraighteningisdone, spected. Allbarrels, .22through .30caliberhave groove tolerances .00005" -five-one-hundred-thousandths!) and6Xborescope in- Finished barrels are air-gauge inspected(air-gauged sensitivityis achieves ex-tremely closeinsideuniformity from breech tomuzzle. Shilen’s ownplantunderthemostrigidcontrols. Thisriflingmethod SPECS: for delivery. Not shippedprepaid. areadvanceand non-cancelableand non-refundable. Allow8-10weeks most likelyspecial ordered. be SpecialOrders requirefull payment in rate, ormaterial (chomemolyorstainlesssteel)not listedhere, itcan Special Orders:Ifyoudesirea barrel in aspecificcontour, caliber,twist (2.5cm), 1lb.(.45kg).

threads yourselfandbeabsolutely certainthetwopieceswillfittogether correctly. or otherthreads basedonspecsshowninthiscatalog, or anybook,untilyouhave bothpartsinyourhand. Thenyoucanmeasure the Standard G.I. contourbarrels are machinedfrom 4150chrome- Only thosebarrels passingallspectestsare offered tothetrade.

Thread specsoften changeinthemiddleof production runs,cutters wear andsetupfolks make mistakes. Don’tcutbarrel, action #787-284-093AS #787-264-093AS #787-224-093AS #787-000-017AS #787-308-103AS #787-224-143AS #787-243-103AS #787-270-103AS #787-224-123AS #787-338-103AS #787-284-113AS #787-257-103AS 4140 chrome moly(CM)or416 stainlesssteel(SS) 4150 chrome-moly steel, Parkerized, matte blackfinish.Not CONTOUR #3 $191.99 G. CM NA NA NA NA NA FULTON ARMORY I . Contour; Threaded & Short-Chambered

M1 GarandBarrel, #787-928-093AS #787-926-093AS #787-924-103AS #787-930-103AS #787-922-143AS #787-925-103AS #787-927-103AS CONTOUR #3 $271.99 NA NA NA NA NA NA NA NA NA NA SS

BARREL

CONTOUR #4CM #787-284-094AS #787-264-094AS #787-308-104AS #787-224-144AS #787-243-104AS #787-308-124AS #787-270-104AS #787-338-104AS #787-358-124AS #787-257-104AS #787-375-124AS $191.99 NA NA NA NA NA NA Match-Grade BarrelBlanksIn Chrome Moly Or Stainless Steel M1 GARAND ​3K284M35

#787-928-094AS #787-924-104AS #787-930-104AS #787-922-144AS #787-925-104AS #787-933-104AS #787-935-104AS #787-927-104AS #787-937-124AS CONTOUR #4 CHECK ITBEFORE YOU THREAD IT!! $271.99 NA NA NA NA NA NA NA NA SS

�

. METRIC: 1" #787-000-018AS #787-284-095AS #787-264-095AS #787-224-095AS #787-458-145AS #787-224-145AS #787-308-105AS #787-243-105AS #787-308-125AS #787-270-105AS #787-224-125AS #787-338-105AS #787-257-105AS CONTOUR #5 ab $ 289.99 $191.99 CM NA NA NA NA Office/Tech:

ab

#787-000-019AS #787-926-095AS #787-922-095AS #787-924-105AS #787-945-145AS #787-930-105AS #787-928-105AS #787-922-145AS #787-925-105AS #787-927-105AS CONTOUR #5 $271.99 #787-014-223AS NOTE: Allmeasurements are nominalandnotexact. Contours pre-threaded, target-crowned, and finishchambered, withextrac helps steadyyourholdfor improved shot-to-shotconsistency. Fully needed toproduce enhancedaccuracy. Extra weightat themuzzle barrel is button-rifled for thesuperiorland-to-groove dimensions .821" (21mm)muzzlediameter. SPECS: Gunsmith installation recommended space and drill the gas port. Designed to work with factory gas block. tor slotalready machinedin,soit’sready toinstall.Justsetthehead NA NA NA NA NA NA NA 9 8 7 6 SS 5 4 3 2 1 UNT

Increase the accuracyof yourfavorite Mini-14. Heavy-contour SHILEN MINI-14 CM steel,in-the-white..223Rem.only. 1-9"twist,20"(50cm)long,

#787-308-106AS #787-243-106AS #787-308-126AS Finished CONTOUR #6 Length $191.99 26 26 26 26 26 26 24 24 22 26 CM NA NA NA NA NA NA NA NA NA NA NA NA NA NA Premium Barrel

1.125 1.250 1.250 1.250 1.250 1.250 1.250 1.250 1.250 1.250 7H248N54 .223 Remington Mini-14 Barrel, CONTOUR SPE

A #787-930-106AS #787-922-146AS CONTOUR #6

641-623-5401 $271.99 .900 .875 .800 .750 .700 NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA SS B

UNTURNED BLANK .825 1.000 .875 .700 .700 .650 .625 .600 .550 � ®

Increases Accuracy C #787-284-097AS #787-224-097AS #787-224-147AS #787-308-107AS #787-224-127AS #787-257-107AS CONTOUR #7 CIFCATIONS HEAVY BARREL HEAVY $191.99 CM NA NA NA NA NA NA NA NA NA NA NA ab 3 3 3 2.5 2.5 2.5 2.5 2.5 D

#787-922-097AS #787-922-147AS CONTOUR #7 2 2 2 2 2 E $271.99 NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA SS

Weight 5.75 lb 7 lb 6 lb 5 lb 4.25 lb 3.75 lb 3 lb 2.75 lb 2.5 lb 9 lb Blank

​

#787-308-108AS CONTOUR #8 $ 264.99 $191.99 Length Actual Blank CM NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA 28 28 28 28 28 28 26 26 22 28

- -

rifle BARRELS - CENTERFIRE - - NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA #8 CM 324.99 " (69cm) $ 314.99 $ 254.99 2 2.25 lb 2.75 lb 3 lb 3.50 lb 4 lb Varies 5.50 lb 6.25 lb 8.50 lb 7C242L75 WEIGHT $ 259.99 / APPROX. 1 167 #237-308-108AS STK# CONTOUR STK# CONTOUR

��������� .224-14 6mm-10 .257-10 .7mm-9 .30-10 .30-12 .22 Rim-16 E BORE/TWIST 3" 2.625" 2.375" 2.125" 2" 2" Light Std. Hvy. NA NA NA NA NA NA NA NA NA NA NA NA NA NA #7 SS ab $ 304.99 PAGE 7C288E48 D #237-930-107AS #237-924-147AS #237-924-087AS STK# CONTOUR STK# CONTOUR 1.25" 1.25" 1.25" 1.25" 1.75" 1.750" 3 3 3 ​7C299P87 NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA C #7 CM .560" .600" .625" .650" .700" .750" .750" .875" 1.000" $ 239.99 7C218E00 #237-224-127AS #237-308-107AS STK# CONTOUR STK# CONTOUR - - - STK# SS B SPORTER BARRELS SPORTER ���������������������������������������������������� .700" .750" .780" .875" .900" 1.015" DOUGLAS NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA #237-722-167AS #237-725-107AS #237-730-127AS #237-722-147AS #237-730-107AS #237-724-107AS #237-728-097AS TARGET BARRELS TARGET #6 SS $ 299.99 7C286V71 1.200" Rough Turned Blank Barrel Turned Rough 1.200" #237-930-106AS STK# CONTOUR STK# CONTOUR A

.30-10 X-Long Blank, .30-10 X-Long 1.200" 1.200" 1.200" 1.200" 1.200" 1.200" 1.200" 1.225" 1.225" Air Gauged Chrome Moly Blank, 7C248N89 Air Gauged Stainless Blank, 7C310B44 �� " NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA 2 ⁄ 1 #6 CM $ 239.99 7C218M00 22" 24" 24" 26" 26" 26" 26" 26" 28" 29 CONTOUR SPECIFICATIONS CONTOUR #237-308-106AS #237-284-096AS STK# CONTOUR STK# CONTOUR Length Finished Stainless or 4140 chrome moly steel, #7 contour, 27 moly steel, #7 contour, chrome Stainless or 4140 rade; Hand-Selected For Uniformity To Within .0001" To Uniformity For Grade; Hand-Selected “AIR GAUGED” PREMIUM BARREL PREMIUM GAUGED” “AIR Every barrel is precision, instrument-inspected for absolute instrument-inspected for precision, is barrel Every STK# CM XX #5 NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA $ 299.99 7C286J71 BBL. NO. 1 2 3 4 5 5A 6 7 8 BASIC #237-630-100AS #237-622-167AS #237-622-147AS #237-624-107AS #237-625-107AS #237-628-097AS #237-630-107AS #237-630-127AS manding criteria wears the XX Premium stamp. manding criteria wears the XX Premium SPECS: straightness and air gauged for maximum uniformity to yield the maximum uniformity straightness and air gauged for breech tolerance from possible. Land and groove accuracy greatest de these meets that barrel a Only .0001". only vary can muzzle to long. Muzzle end marked for tightest taper. Not chambered or threaded. or threaded. chambered Not taper. tightest for long. Muzzle end marked 30" long. blank Unfinished X-Long — Advise # — — Advise # — #237-924-145AS STK# CONTOUR STK# CONTOUR - - - NA NA NA NA NA NA NA 88.75 #5 SS 121.50 129.99 129.99 $ 299.99 7C286I71 $ 121.50 #237-937-125AS #237-941-125AS #237-933-105AS #237-925-105AS #237-923-105AS #237-930-105AS #237-945-225AS #237-928-095AS #237-924-085AS #237-964-095AS STK# CONTOUR STK# CONTOUR ����������� ����������� ​ ������������� �������������

NA NA NA NA NA NA #5 CM $ 239.99 7C218K00 #237-375-125AS #237-257-105AS #237-323-105AS #237-338-105AS #237-243-105AS #237-308-105AS #237-458-145AS #237-458-225AS #237-224-095AS #237-264-095AS #237-284-095AS STK# CONTOUR STK# CONTOUR ​7G116H03 ​7G116E03 ​7G110B50 ​7G110Q50 NA NA NA NA NA NA NA NA NA NA NA #4 SS $ 304.99 7C288N48 #237-937-124AS #237-933-104AS #237-925-104AS #237-930-104AS

#237-924-144AS #237-928-094AS STK# CONTOUR STK# CONTOUR ���������������������������������������������������

the new liner in place, then cut a new N REDMA .40" groove diameter, .590" (15cm) .590" diameter, groove .38-40; .40" ® NA NA NA NA NA NA NA NA #4 CM " (3.8cm) longer than shown. Not threaded or threaded shown. Not longer than " (3.8cm) IRE BARREL LINER BARREL FIRE $ 239.99 2 7C218B00 / 1 #237-257-104AS #237-358-124AS #237-338-104AS #237-270-104AS #237-243-104AS #237-308-104AS #237-224-144AS STK# CONTOUR STK# CONTOUR #237-264-094AS #237-284-094AS .25-20 Barrel Liner, .32-20 Barrel Liner, .38-40 Barrel Liner, Barrel Liner, .44-40 13mm Short Barrel Liner Drill, 1F88M75 " drill for .25-20 liners, 13mm drill with .32-20 lin " drill for 16 / 7 NA NA NA NA NA NA NA NA NA NA NA NA NA NA ab #3 SS $ 292.99 CAUTION: Use these liners.CAUTION: " drill with .38-40 and .44-40 7C279D65 32 CENTER #237-925-103AS #237-930-103AS #237-928-093AS STK# CONTOUR STK# CONTOUR / 19 .257" groove diameter. .435" (11mm) O.D., 1-14 1-14 (11mm) O.D., .435" diameter. CM steel. .25-20; .257" groove Pistols Back To Life, To Back Pistols n The Original Caliber Original The In High-grade, button-rifled, NA NA NA NA NA NA NA NA NA NA Bring Those Fine Old Rifles & Old Rifles Fine Those Bring #3 CM .428" groove diameter, .590" .590" diameter, groove .428" 1-25 twist, 25" (63cm) long. .44-40; O.D., chambered. NOT are 1-25 twist, 25" (63cm) long. Liners (15cm) O.D., rel liners in any other caliber is dangerous and can cause serious caliber is dangerous rel liners in any other injury. bodily SPECS: (12cm) O.D., .505" diameter, groove long. .32-20; .311" twist, 25" (63.5cm) long. 1-18 twist, 25" (63.5cm) ers, and share similar bullet diameters. Chambering these bar tridges that chamber. Use chamber. chrome moly liners, with a super- chrome or worn with guns older to accuracy restore finish, inside smooth (Hi- Force rifling, soft install: drill out existing To shot-out barrels. 44™) solder or ACRAGLAS liners only with the specified cartridge. Do not use with other car with other use not Do cartridge. specified the with only liners #770-100-322AS #770-100-440AS #361-504-013AS #770-100-384AS #770-100-252AS chambered. twist caliber, contour, in a specific a barrel Orders: If you desire Special it can listed here, steel) not or stainless (chome moly or material rate, in full payment require Orders Special be ordered. special most likely Allow 8-10 weeks and non refundable. non-cancelable and are advance shipped prepaid. Not delivery. for larger in diameter and 1 in diameter and larger $ 292.99 7C279I65 #237-257-103AS #237-358-123AS #237-270-103AS #237-308-103AS #237-224-093AS #237-264-093AS #237-284-093AS STK# CONTOUR STK# CONTOUR - order on the web - - NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA #2 SS $ 239.99 $ 175.99 7C218L00 ​

brownells.com #237-930-102AS #237-928-092AS STK# CONTOUR STK# CONTOUR NA NA NA NA NA NA NA NA NA NA #2 CM $ 229.99 7C218P46 ab #237-257-102AS #237-338-102AS #237-270-102AS #237-243-102AS #237-308-102AS #237-224-142AS #237-284-092AS STK# CONTOUR STK# CONTOUR NA NA NA NA NA NA NA NA NA NA NA NA #1 CM $ 245.00 7C234A07 #237-270-101AS #237-308-101AS #237-224-141AS #237-224-091AS #237-284-091AS STK# CONTOUR STK# CONTOUR ������������������������������������������������� DOUGLAS n Sporter & Military Sporter In Contour NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA WILSON ARMS $ 292.99 7C279I65 BLANK SS BARREL FITTIBARREL NG aftermarket barrels will need some fitting. barrels aftermarket #237-930-100AS #237-926-090AS STK# UNTURNED ab Grade 3H148P81 #4 Contour Mauser Barrel, .308 Win, LED BARREL FLED ULTRA-RI NA NA NA NA NA NA NA NA NA custom $ 229.99 Factory 7C218N46 BLANK CM All #237-375-120AS #237-257-100AS #237-358-120AS #237-308-110AS #237-323-100AS #237-270-100AS #237-458-140AS #237-458-220AS 4140 Chrome moly and stainless steel. “Finished” dimensions moly and stainless steel. “Finished” Chrome 4140 STK# UNTURNED MAUSER 98 SPORTER BARREL MAUSER 4140 chrome-moly steel, hardened to Rc 25-32, in the white. to Rc 25-32, in the steel, hardened chrome-moly 4140

Famous, Douglas Double XX premium-grade barrels are an are barrels Douglas Double XX premium-grade Famous, Pre-threaded and short-chambered .308 Winchester barrel is .308 Winchester barrel and short-chambered Pre-threaded rade Barrel Blanks From U.S.’s Oldest Barrel Maker Oldest U.S.’s From Grade Barrel Blanks Match- The amount required will depend on the tolerances allowed The amount required need may barrels Some receiver. the and barrel the both by has been fitted. the barrel the chamber cut to full depth after files and stones to help with the carry a wide variety of We Manson and Clymer from reamers chambering and fitting, Precision. TWIST BORE & 7mm-9 .30-10 8mm-10 .338-10 .358-12 .375-12 .416-12 .458-14 .458-22 .224-8 .224-9 .224-12 .224-14 6mm-10 .257-10 6.5mm-9 .270-10 SPECS: SPECS: (1.3mm) (.63mm)-.050" .025" will be Blanks shown in chart. Unturned are ness with tolerances for groove diameter and straightness held to and straightness held to diameter groove for ness with tolerances .358, while the grooves 6- feature .338 barrels .22 through .0005". and all barrels No straightening is done 8. have barrels .375 and .458 relieved. stress are excellent choice for any rebarrelling project. Proven accuracy and accuracy Proven project. any rebarrelling choice for excellent smooth unequalled rifled for Button in manufacture. finest care #983-000-001AS erance of .0001"; furnished with the chamber left .010" short. Re furnished with the chamber left .010" .0001"; erance of chambering. gunsmith fitting and final quires SPECS: diameter rifling. 26" long, .650" Button rifled with 1-10" twist, 6-groove the muzzle. at precision made to provide superior accuracy. With the popular #4 accuracy. superior made to provide precision relieved Stress to build into a high-quality sporter. it’s ready Contour, tol and machine lapped then air gauged with a muzzle-to-breech - - - - .44- 81.99 NA NA $377.99 $ 103.99 $ 102.99 $ 108.99 $ INT VARM Blank CONTOUR SS CONTOUR 3 lb 2.75 lb 2.5 lb Weight #801-783-308AS #801-783-224AS #801-783-220AS #801-783-225AS PRICE 1F81I99 9 9 9 E 1F103P99 1F102K99 NA NA NA NA NA 1F108C99 $284.99 INT VARM CONTOUR CM CONTOUR #801-782-308AS C ab .660 .825 .660 N 700 NGTO REMI .391" (9.9mm); (9.9mm); .38-40 - .391" NA NA NA Installing Barrel Liners $299.99 INT VARM B 800-741-0015 DRILL SIZE CONTOUR CM CONTOUR

.780 .910 .720 #801-782-240AS #801-782-220AS #801-782-225AS .315" (8mm) (11.1mm) .438" .593" (15.1mm) .593" (15.1mm) A N /SHILE 1.22 1.22 1.22 NA NA NA NA NA STND $299.99 CONTOUR CM CONTOUR #801-780-306AS LINER .44-40 CONTOUR SPECIFICATIONS CONTOUR .22 .25-20 .38-40 TOUR NTOUR CO ACTORY 25 26 25 .247" (6.8mm); (6.8mm); .25-20 - .247" F Length BARREL LINER DRILLS BARREL Finished NA NA NA NA NA STND PRE-THREADED BARREL PRE-THREADED $284.99 CONTOUR CM CONTOUR #801-780-240AS

Hi-Speed steel. 15" (38.1cm) OAL. Handles barrels up to 25" Handles barrels OAL. Hi-Speed steel. 15" (38.1cm) 4140 Chrome Moly steel, in-the-white or 416 Stainless Steel, 416 Moly steel, in-the-white or Chrome 4140 Special Deep-Hole Drills For Special Deep-Hole

STOCK # STOCK Made for Brownells by Shilen to match the factory contour. Up factory contour. the to match by Shilen Brownells Made for For the gunsmith who does not want to make his own drill ex own his make to want not does who gunsmith the For TWIST CALIBER/ Fits Remington Factory Stocks With Little-To-No Modification Factory Remington Fits Little-To-No With Stocks .308 Win/10 .223 Rem./14 .243 Win./10 .243 .30-06/10 .223 Rem./9 .22-250/14 Orders/Tech: stress relieved. stress SPECS: SPECS: grade the performance and accuracy of Remington 700 rifles with Remington of and accuracy grade the performance have barrels short-chambered work. Match-grade, out costly stock or aftermarket into Remington factory to drop contour the correct Install with channel modifications. barrel with little-to-no stocks and ready the bore 90° to lug. Muzzle is cut at your factory recoil use a hand-turned, finish reamer After installation, crowning. for (Correct headspace is reached. to deepen chamber until correct required.) headspace gauges and reamer #361-000-002AS #361-000-003AS #361-504-000AS #361-000-001AS SPECS: SPECS: diameter: .22 Pilot length: 1" (2.5cm). length maximum. Pilot (63.5cm) (5.5mm); - .216" ing a customer’s gun with an off-center hole. Given proper care, care, Given proper hole. ing a customer’s gun with an off-center will last a lifetime. .419" (10.6mm). - .419" 40 tension, our Hi-Speed steel drills are designed especially for deep for designed especially steel drills are tension, our Hi-Speed the liner must Liners. The hole for Barrel Brownell hole drilling for each end, and the ONLY from than halfway be drilled slightly more joining when using a hand drill is to use these proper way to ensure the drill tendency for the piloted drills. Special helix angle eliminates time and headaches. and jam, saving to “pull” itself into the material than ruin quality drill is far cheaper this premium The extra cost for Magnum Varmint Contours Standard BARRELS - CENTERFIRE BARRELS - RIMFIRE rifle — Advise# (66cm) long. dia., 24"muzzle .700" (60cm)long.#2100- (17.7mm)dia., 26" muzzle SPECS: unchambered. lasting performance. Contoured blanks are finishmachinedand a superiorriflebarrel capableof outstandingaccuracy andlong- uniformity towithin.000227", thenpainstakinglylappedtoproduce button rifledinacloselycontrolled environment that assures bore now youcantoo.Eachandeverybarrel ismeticulouslycrafted; ed onLotharWalther riflebarrels for consistentlyhighperformance, #950-284-091AS dimensions; nitridedlandsfor longlife. helix angletoprevent jamming;reinforced webfor accurate hole features asour.22LinerDrill:Deep holeflutegeometryandspecial Piloted tofollow theoriginalbore andhave allthesamehigh-grade Drill, thesestandard length, deepholedrillscansave youmoney. .25-20 - .248"/11", .32-20 - .302"/11.6", .38-40 - .394"/12.4". SPECS: #371-000-037AS #371-000-038AS 1:9.5" twistrate features chrome-lined chamberandbore for maxi nions. SPECS: nian, Polish,Maadi,andcloneswithfixed orunderfolder stocks. 1975 barrel hasthesidecutsandfitsreceivers of American,Roma Yugoslavian receivers withfixed orunderfolder stock;noside cuts. headspacing setbyaknowledgeablegunsmith.1970barrel fitsM70 muzzle threads. Fits23mmtrunnions.Requires gasportdrillingand corrosion- andwear-resistance. Comeswith14x1mm left-hand mum servicelife. Matte black/dark grayParkerized finishprovides (41.5cm)14-1mmlong. thread.muzzle LH 1:9.5" trun 23mm Fits twist. #361-504-436AS #361-504-013AS #361-504-437AS #361-504-008AS SHORT, PILOTED BARREL LINERDRILL STK# #1300 Countless numbersof worldchampionshootershave depend If youcansilversolderorbraze yourownextensionontoaLiner High-quality carbonsteel,7.62x39mm chambered barrel with STOCK # 1970 – 21.5 oz. (610g)wt.1975 – 19.4 oz. (550g)wt. Chrome Lined; Ready For A New Build,Or Upgrade NA NA Quality Craftsmanship For Unparalleled Accuracy 4140 carbonsteel,chrome lined,black oxide exteriorfinish.16 High speedsteel.Pilot diameter/overalllength;.22-.215"/9.5",

LW19 steel,in-the-white.Contours: #1300 -.625" (15.8mm) Save Money By Adding Your OwnExtension GREEN MOUTAIN Lothar Walther Barrel,5Z196Q88 1G154L49 AK-47 Barrel,1975Profile, 1G154Q49 AK-47 Barrel,1970Profile, LOTHAR WALTHER FITS CAL. RIFLE BARREL .38-40 .32-20 .25-20 .22 RF #950-000-002AS #950-000-001AS #950-284-092AS BARRELS STK# #2100 � � PAGE DRILL DA. .590" .437" 8mm 13mm

AK-47 168 ®

​ ​ IST CALIBER &TW

1F88M75 1F52C00 1F69B99 1F59G15 � .308-10 .264-8 .284-9 PRICE $ 235.41 $ 159.99 159.99 $ 52.00 $ 69.99 $ 88.75 $ 59.15 ab 3 / 8 - - - - " threaded muzzlefor addingacompensator. Stainlessmodelavail in an18"lengthwithdishedcrown ora16 Chrome-moly modelshave polishedbluefinishandare available CCI Stinger ammunition.Minorfittingtostockmayberequired. Use withstandard ormatch gradeammunition;notfor usewith provides maximum stability for greater shot-to-shot consistency. of astandard factorychamber. Extra-heavy, untapered .920" O.D. the accuracyof amatch gradechamberwiththereliable cycling original factorybarrel. Close-toleranceBentzchambercombines barrel provides animmediate improvement inaccuracyoveryour Blued barrel w/threaded muzzle–16 steel SPECS: have dishedcrown. heat dissipation, lessweight,andimproved barrel harmonics.Both able insmooth18"longbarrel orpatented helicalflutingfor greater #801-736-105AS #801-738-907AS #801-738-107AS #801-000-033AS #801-738-905AS #801-738-105AS #801-000-029AS to ourspecifications byShilen. reached, (correct ReamerandHeadspaceGaugesrequired). Made turned finishreamer todeepenchamberuntilcorrect headspaceis air-gauged toensure conformity. Afterinstallation, useahand- Groove tolerancesare uniform towithin.0003" end-to-endand ease of installation. Plus,theboltbodycounterbore isfullycut. match-grade barrels are pre-threaded andshort-chambered for deliver withouttime-consumingandcostlylathe work.Brownells superior performance that onlyacustom,match-quality barrel can you canprovide yourcustomerswiththeincreased accuracyand for rebarreling and accurizing the fine Remington 700 action. Now See ShilenContour Specification chartfor contour dimensions. breech to.750" (19mm)(#6)and.900" (22.9mm) O.D. (#7)atmuzzle. the Contour #6and#7are straight tapered from 1.200"(30.5mm) at the varmint barrel andrequires onlyminimumalterations tofactorystocks. long. (66cm) SPECS: #100-004-745AS #100-004-747AS #100-004-746AS #100-004-748AS Heavy contour, premium-grade “Bentz” chambered .22LR The fastest,mostconvenientmethodavailable toanygunsmith STOCK # SHILEN REMINGTO 700BARREL (SS), natural matte finish..920" (2.34cm) O.D. 18"long(45.7cm). 4140 chrome-moly steel,blued,polishedfinish,or416 stainless 4140 chrome molyor416 stainlesssteel,stress relieved. 26" Pre-Threaded To Fit Remington 700 Actions Bentz Chambered For ImprovedAccuracy Contour #5.5matchfactory Remington close to is avery E.R. SHAW .30-06/1-10 .308/1-10 .308/1-10 .308/1-10 .308/1-10 .308/1-10 .22-250/1-8 IST CAL./TW TARGET BARRELS 1A93A62 10/22 ThreadedTarget Barrel,Blued, 1A187Q24 10/22 FlutedTarget Barrel, SS, 10/22 Target Barrel,SS, 10/22 Target Barrel,Blued, ab Short-Chambered; SATISFACTION GUARANTEED � � CONTOUR � #5.5 #7 #7 #6 #5.5 #5.5 #7 ab RUGER 1 / 2 " (42cm)long. MATERIAL SINCE 1939 ® CM SS CM SS SS CM SS 1 10/22 /

2

" lengthwith ​1A112F20 ​1A93Q62 � 7H283H54 7H283B54 7H266J70 7H354B11 7H354B11 7H354I42 1 7H354I11 /

2 ® "-28 tpithread. ​ � PRICE 1

/ $ 284.99 ​ 2 $ 299.99 $ 299.99 � $ 377.99 $ 377.99 $ 377.99 $ 377.99 "-28 tpi $ 99.99 199.99 119.99 99.99 - #080-000-566AS M4 carbinebarrel istheperfect companionfor theNordic Compo twist rifling,for excellent accuracy. gidity andsuperiorresistance toheat warpage,with1-14" right-hand Includes the cutout for grenade launcher and pre-threaded available separately) togivea10/22anauthentic“Black Rifle”look. nents AR22ReceiverChassisorArchangel ARSConversion Kit(both rifling. (23.4mm)O.D. at receiver,.700" (17.8mm) O.D.at 1-14"muzzle. twist RH SPECS: Precision milled from highgrade chrome-moly steel for superb ri and pistolgriptocompleteyour10/22’stacticaltransformation. muzzle brake. AddagenuineAR-15/M16/M4 forearm, buttstock, tpi muzzle ready to accept any standard AR-15/M16 flash hider or #770-000-002AS #770-000-001AS #770-100-122AS #770-100-216AS #770-100-022AS shooting abilities.Someof thesegunsare beautifulcollectionpiec that needonlyabarrel linertobringthembacktheiroriginal and requires aminimumof toolsandshopequipment.Your origi this “hot”calibers. Liner fits.17Mach2,perfect for updating andconvertingriflesto .22 CaliberLiner comes inboth.22ShortandLongRifle. .17 Caliber accuracy that’s betterthan-orequaltoanoriginal,newbarrel. with ultra smooth, uniform finish and sharp, distinct rifling for superb Brownells Barrel Liners, madebyRedmanMfg.,are buttonrifled by theirownerswhowantthembacktooriginalcondition. es, othersare finehuntinggunsandsomeof themare just“loved” rel andliner. method of usingACRAGLAS old, classic method of soldering the liners in, or the more modern tion booklet gives complete, easy-to-follow details for either the nal investmentisquicklypaidoff inthefirstfew jobs.Theinstruc elsewhere for theright tools. rel lockingscrew. CheckourMagna-Tip Allen (socket head)wrench ordriverbittoremove thebar ted screwdriver to take outthestockscrews andan ing for installation. You drop-in items,mostrequiring little-to-nogunsmith Replacement .22LRbarrel withtheexternalcontoursof aUSGI STOCK # There are untoldthousandsof rimfire .22salloverthecountry With theBrownells system,barrel linerinstallation isnotdifficult

4140 steel,black oxide finish..22LR.18"(45.7cm) long,.920"

The 10/22barrels listedonthesepages are Gives Your 10/22 The “Black Rifle” Look SWAPPING 10/22 RIMFIRE BARREL LINERS M4-STYLE BARREL M4-STYLE M4-Style 10/22Barrel, .17 Mach2orHMRonly .22 Shortonly .22 LongRifleonly .22 LongRifleonly .17 Mach2orHMRonly Easily & Professionally Reline Rimfire CALIBER ® for thepermanentbondbetweenbar will need a good,properly fit RUGER ab ® Made By One OfThe Most Rifle Barrels In Your Shop; BARRELS /REDMAN ​8K172C43 Respected NamesIn ® 10/22 The Liner ® system, listed GROOVE DIA. � .223" .223" .223" .172" .172" ® Industry $ 189.99 1 / Office/Tech: 2 "- 28 - - -

------

#513-050-012AS they canoften have abettergunfor lessmoney. and tighteningupof yourcustomers’spendinghabits.Byrelining, should alsoconsiderthepriceandqualityof somenewgunstoday like new”are theusualinstructions.This,youcando. bluing temps);astockrefinish andprobably actionwork-“Make it will alsowantabluejob(solderandACRAGLAS willbothstandhot SPECS: tions FREE,notincluded.Pleaserequest; notsentautomatically. bit, drilledtheholeinalathe andbondedwithACRAGLAS. Instruc in. Schuetzsoldersthelinerinplace.Sprungerextendedaregular used avariablespeedhanddrillandACRAGLAS toholdtheliner gunsmiths BobSchuetz,WillisSprungerandRalphWalker. Walker BARREL INRNSTRUCTION BOOK-Detailsthesystemsusedby serious bodily injury. bering these barrel liners in anyother caliber is dangerous andcan cause not usewithother cartridgesthat share similarbulletdiameters.Cham bered. SPECS: or heavier, or1-10twistfor bulletsunder30grains.Linersare NOT cham length. .17caliberlineravailablewith1-9twistfor usewithbullets30grains (63.5cm) usablelength.32"(81.2cm)OAL, with30 #077-200-143AS eter. FitsRuger10/22only. (SS), brushedsilverfinish.Rc26-32.20"(50cm)long,.920" (23mm)diam SPECS: styles. for consistent accuracy and extraction. Available in plainand fluted chined andbuttonrifled;chamberscuttothe“Bentz” specification #787-902-022AS #628-023-116AS #628-023-115AS #628-023-111AS Installation mayrequire alteration of factorystock. “Bentz” match chamberfor usewithmatch-grade ammunition only. a target crown. Features astraight-cylinderbullcontourwith muzzle dia.1-16" twist.Forusewithmatch ammoonlyfor proper feeding. SPECS: O.D. 5 5 5 5 5 / / / / / When decidingtooffer thisservicefor yourtradeareas, you You’ll findthat alongwitharelining, mostof yourcustomers No fittingnecessaryfor true,match-quality accuracy. CNCma Custom, match-grade barrel, fullymachinedandfinishedwith STOCK # 16 16 16 16 16 Match Quality Chamber & Rifling For Superb Accuracy " " " " " CAUTION: Usetheselinersonlywiththespecifiedcartridge.Do ab Stainless steel, natural(50.8cm)steel, 20" Stainless finish. .22LR. .920"x long (2.3cm) Expert Craftsmanship For Match-Grade Accuracy 8 4140steel. Available in twolengths:26 .22LR. 1-16".22LR. 4140 twist. 416or steel blue stainless polished steel, 1 GREEN MOUTAI N / 2 " (21.6cm) x11"(27.9cm). 16 pages. MATCH-GRADE BARREL NT BARREL REPLACEME SHILEN RUGER IST TW 3A75Q00 .17HMR Redman LinerReamer, Liner InstructionBook, 1-9 1-10 1-16 1-16 1-20 SS .22LRBarrel, FINSH

SS Blue Blue 641-623-5401 � USABLE LNGTH ​7H322N39 MODEL 30" 25" 25" 25" 25" Fluted Fluted Plain RUGER ® 10/22 3 ​7G00BEL / 8 " (67cm) OAL," (67cm) with25" ® � 1G139D70 1G158K40 10/22 5 ab 1G100I47 ® / 7G35M99 7G30F99 7G30L99 7G81B99 8 7G35I99 " (77.7cm) usable ab

​ � PRICE PRICE ® $ 343.99 $ 104.99 $ 154.99 $ 179.99 $ 75.00 $ 40.50 $ 40.50 $ 88.99 $ 35.99 $ 35.99 $ .00 - - - - - rifle BARRELS - RIMFIRE muzzle brakes - - - - - (SS), 47.99 49.99 49.99 $ 47.99 299.99 $ 479.99 $ 269.99 �� ��� 169 ���� ������

® ®

Comp Barrel ® ​

​ ​9E42D96 " (42cm) long x .920" " (42cm) long x .920" PAGE ​9E46I13 ​9E42M96 ​9E46G13 2 ​ 10/22 10/22

xtra Weight Extra /

1 ® ® ab n Compensator In " (52cm) long, .926" (23mm) " (52cm) long, .926" MINI-14 2 ® / 1 - - fits Mini-14 580 fits Mini-14 " (11mm) diameter. 16

/ 7 ����������������������������������������������� ������������������������������������������������ ������������������������������������������������ ab " (46.7cm) long x .920" dia. long x .920" " (46.7cm) 8 / 3 blued, matte finish, or stainless steel (CS), blued, matte

580 Flash Suppressor, CS, 580 Flash Suppressor, SS, 580 Flash Suppressor, CS, 579 Flash Suppressor, SS, 579 Flash Suppressor, “Snake” Fluted Match Barrel, Fluted Match “Snake” 3Z467C40 Standard THM Barrel, .22LR, 3Z260D08 Comp THM Barrel, .22LR, 3Z289H24 " (8.9cm) long. " (8.9cm) 2 FLASH SUPPRESSOR / 1 RUGER CHOATE Maximum Heat Dissipation & Rigidity Dissipation Heat Maximum RUGER N VOLQUARTSE N RUGER VOLQUARTSE For Consistent Accuracy; Built- Accuracy; Consistent For Carbon steel Stainless steel, natural finish. 20 Stainless steel, natural Heavy Barrel Accuracy Without The Without Accuracy Barrel Heavy Stainless steel liner with black, woven carbon fiber shroud 1:16" 1:16" woven carbon fiber shroud Stainless steel liner with black, Pre- & Post-580 Rifles Post-580 & Pre- LUTED MATCH BARREL MATCH “SNAKE” FLUTED ffective Flash Control For Easy to install flash suppres Match-grade stainless steel .22 LR barrel has eye-catching has eye-catching barrel stainless steel .22 LR Match-grade Ultra-lightweight, .22LR and .22WMR bull barrels feature a feature barrels bull .22LR and .22WMR Ultra-lightweight, E BARREL TENSION FIBER N CARBO THM #159-000-037AS #159-000-036AS #159-070-712AS #159-000-032AS natural finish. 3 natural with standard factory barrel and serial number prefix of 580 or higher. 580 or higher. of and serial number prefix factory barrel with standard of and serial number prefix factory barrel with standard 579 fits Mini-14 579 or lower. sor features vented chambers that that chambers vented features sor muzzle flash. Closed bot control sight with M14- Replaces front dust signature. tom helps reduce In screw. style wing and post, slips over muzzle and is held by set instructions. pins and installation cludes roll SPECS: O.D., without taper. 3 lb 1oz. (1.33kg) weight. 1-16" twist rifling. Fits Ruger twist rifling. 1-16" weight. (1.33kg) 3 lb 1oz. without taper. O.D., 10/22 .22 LR only. racy. Versatile, 1-16" rifling stabilizes a wide variety of hunting and a wide variety of 1-16" rifling stabilizes Versatile, racy. bar a Volquartsen ammunition. Drilled and tapped to accept match mounted scope mount. rel SPECS: SPECS: “snake”-style flutes that provide maximum surface area for heat heat for maximum surface area provide flutes that “snake”-style consistent accuracy, stiffness for and extra longitudinal dissipation an integral, single-chamber compensator Features shot-after-shot. gas and noise away from vents to direct with 45° forward-facing CNC machined and digitally gauged to match-grade the shooter. accu bench-rest for and crown bore, tolerances in the chamber, #930-000-069AS ceptional rigidity without excess weight. All barrels are drilled and are All barrels weight. without excess ceptional rigidity a single cantilever scope mounts. Comp model features tapped for and fast fol recoil reduced for compensator multi-port chamber, barrels do not include compensator. low-up shots. Standard barrels SPECS: - 16 Standard twist. Fits 10/22 .22 LR rifles only. taper-honed, match chamber and bore for outstanding accuracy. outstanding accuracy. for and bore chamber match taper-honed, ex both ends provides with axial tension at Carbon fiber shroud Comp - 18 dia. Comp (23.4mm) #930-000-005AS #930-122-050AS - - ab 25.99 $ 79.99 $ 25.99 $ 99.99 $ 99.99 $ 89.99 295.99 295.99 ® $ 269.99 ​

PRICE

​

® ​ ������������ ������������ " overall length. 10/22

1G75A81 (SS), in-the-white. 1G90E61 1G90P61 1G60F62 2 ® / 1

Takedown rifle models Takedown ® 1:16" 1:16" 1:16" 1:9" TWIST " (42cm ) O.A.L. including including " (42cm ) O.A.L. & 77/22 2 / ® ​8K269J99 1 ​8K270E74 RUGER 10/22 "-28 tpi threads. Installation in Installation "-28 tpi threads. ® SS CM SS CM 2 / STEEL 1 ab 10/22 ® ������������������������������������������������ (CM) or stainless steel 25" 25" 17" 25" fits Ruger - - ����������������������������������������������������� ����������������������������������������������������� rifles with serial number lower than 703- ® ® LENGTH SB-X Barrel, SB-X Barrel, SB-X Takedown SB-X Barrel, SB-X SB-X BARREL SB-X ® ® ® ab 77/22 NS SOLUTIO TACTICAL ® RUGER N NTAI N MOU GREE HM2 Top-Quality Construction; Construction; Top-Quality BARREL BLABARREL NKS 8K270M74 10/22 10/22 77/22 8K24C86 Thread Protector, Polished Stainless, Thread Protector, Thread Protector, Polished Blue, Thread Protector, 8K24C86 .17 HMR/ .22 LR .22 LR .22 LR CALIBER "-28 threads actually screws to the barrel inside to the barrel actually screws "-28 threads 2 / 1 THREAD PROTECTOR THREAD " (31.1cm) bore length, .920" (2.3cm) O.D. Accepts muzzle Accepts O.D. (2.3cm) length, .920" " (31.1cm) bore Items 4 / 1 deal For A Super-Accurate Small Caliber Rifle Caliber Small A Super-Accurate For Ideal 6061 T6 aluminum, hardcoat anodized, matte black. Chrome- matte anodized, 6061 T6 aluminum, hardcoat "-28 tpi threaded muz "-28 tpi threaded 4140 chrome moly steel chrome 4140 2 NS SOLUTIO TACTICAL / 1 fits Ruger 77/22® Button-rifled, 4140 chrome moly or stainless steel barrel blanks blanks barrel moly or stainless steel chrome 4140 Button-rifled, Made from 416 stainless Made from Lightweight, aluminum replacement for factory barrel gives you gives barrel factory for replacement aluminum Lightweight, STOCK # STOCK When Not Using A Flash Using Not When et The Benefits Of A Short Barrel Without The Paperwork Of Benefits The Get Protects Crown & Rifling Crown Protects Suppressor/Muzzle Brake #100-005-210AS 100-015-927AS 100-015-931AS 1.06" (27mm) O.D.; lengths listed in table below. (27mm) O.D.; 1.06" SPECS: SPECS: are stress-relieved and air gauged to +/- .0002" for superb accuracy superb for air gauged to +/- .0002" and stress-relieved are or rifle. Not chambered your custom rimfire from and performance fitting. custom for ready threaded, accessories up to 1" (2.5cm) O.D. with O.D. up to 1" (2.5cm) accessories 58030 (manufactured prior to 11/13/09).58030 (manufactured tects (2.34cm) .920" is attached. zles when no flash hider or compensator .397" (1cm) long. O.D. fit to receiver. a secure shank ensures Oversized mal accuracy. SPECS: twist rifling. 16 moly steel liner with 1-16" structions included. Takedown only. only. the shroud, so it adds nothing to the barrel’s 16 to the barrel’s so it adds nothing the shroud, shroud, 12 shroud, Machined from billet aluminum, with a .920" O.D. to provide the to provide O.D. with a .920" billet aluminum, Machined from weight without the bull barrel a of benefits heat-transfer rigidity and opti liner ensures bore steel A button rifled chrome-moly penalty. steel, this screw-on cap pro steel, this screw-on the compactness and maneuverability of a short barrel, while the short barrel, a the compactness and maneuverability of length legal the barrel keeps muzzle shroud permanently attached flash suppressor worry about. Your paperwork to transfer - no NFA with standard #100-013-916AS #100-013-915AS #371-000-030AS #371-000-035AS #371-000-032AS #371-000-027AS - - order on the web 34.99 "-28 tpi 2 199.99 199.99 199.99 259.99 259.99 259.99 259.99 259.99 259.99 249.99 249.00 $ 34.99 / 1 $ 199.99 $ 249.00

brownells.com ���� ������ ® ​ ​

ab ab ​ ​ ​ ​ ​ ​ ​ ​

​ ​

​8K33H29 ​8K33F29 "-28 tpi threads. "-28 tpi threads.

2 / & SR-22 1 ® "-28 tpi threaded muzzle for muzzle for "-28 tpi threaded 2 - ���������������������������������� / 1 10/22 TARGET BARREL TARGET ® TM ������������������������������������������������ ������������������������������������������������ ������������������������������������������������� ������������������������������������������������� ������������������������������������������������� ������������������������������������������������� ������������������������������������������������� ������������������������������������������������� ������������������������������������������������� � ������������������������������������������������ ������������������������������������������������� ������������������������������������������������� " (41.9cm) long x .920" (2.34cm) O.D. 1 lb. O.D. (2.34cm) long x .920" " (41.9cm) 2 ​8K243L79 / 1 S N SOLUTIO TACTICAL RUGER "-28 threaded muzzle. 15 oz. (425g) wt. Includes (425g) wt. Includes muzzle. 15 oz. "-28 threaded 2 10/22 Compensator, SIL, 10/22 Compensator, 10/22 Compensator, GB, 10/22 Compensator, 8K243C79 8K243C79 X-Ring Open Sight Barrel, Black, X-Ring Open Sight Barrel, O.D.X-Ring Green, Open Sight Barrel, Silver, X-Ring , Standard Fluted Barrel, GB 8K194L24 Standard Fluted Barrel, MB, 8K194E24 Standard Fluted Barrel, Red, 8K194M24 Standard Fluted Barrel, Blue, 8K194M24 Threaded Fluted Barrel, MB, 8K257G50 Threaded Fluted Barrel, MS, 8K257D50 Threaded Fluted Barrel, OD, 8K257F50 Threaded Fluted Barrel, FDE, 8K257G50 Threaded Fluted Barrel, Red, 8K257N50 Threaded Fluted Barrel, Blue, 8K257G50 / 1 Flat Dark Earth silver (MS), olive drab (OD), Flat or matte NG X-RI " long, Threaded model only. " long, Threaded 8 / 3 Colors 6061 T6 aluminum, hardcoat anodized, gloss black (GB) or silver anodized, 6061 T6 aluminum, hardcoat Barrel Shell - Aircraft grade aluminum, anodized, gloss black (GB), gloss grade aluminum, anodized, Shell - Aircraft Barrel Reduces Weight Without Compromising Accuracy Without Weight Reduces models feature a .920" diameter, straight bull bar straight bull diameter, a .920" Standard models feature Drop-in, .22 LR target barrel features a premium, button-rifled, a premium, features barrel .22 LR target Drop-in, model adds a threaded Threaded model adds a threaded #100-005-204AS 100-801-007AS attaching a flash hider or compensator. Includes streamlined cap to streamlined Includes hider or compensator. a flash attaching when hider or comp isn’t installed. threads protect (.45 kg) wt. Fits Ruger 10/22 and SR-22, .22 LR receivers only. only. wt. Fits Ruger 10/22 and SR-22, .22 LR receivers kg) (.45 ity and overall surface area for improved heat dissipation. Hardcoat Hardcoat dissipation. heat improved for area surface and overall ity resistance. and abrasion added strength surface delivers anodized hunting and variety of a wide 1-16" twist rifling stabilizes Versatile, to factory alteration may require Installation ammunition. match stock. rel. SPECS: black (MB), matte - Chrome Liner bull bbl. contour. (FDE), Red, or Blue finish. Non-tapered, twist. 16 1-16" .22 LR, moly, male threads, male threads, chrome moly liner installed in a lightweight aluminum shell to installed in a lightweight moly liner chrome CNC weight. Deep, grade accuracy and reduced achieve match rigid lb., plus increase weight to 1 barrel machined flutes help keep pansion chamber and 48 vent holes to help control muzzle blast redirect can you so recoil, and jump muzzle your 10/22’s sights on the target keep screw- up shots. Easy, fast follow for Sol fluted target to Tac on attachment finished look. a neat, for and the same O.D. barrels SPECS: O.D. (2.3cm) long, .900" (SIL) finish. 2" (5.1cm) Large internal ex - Large ENSATOR COMP #100-016-744AS #100-016-743AS #100-016-742AS muzzle thread protector. muzzle thread finish, black, O.D. green, or silver. 16.5" (41.9cm) long. .920" (2.3cm) O.D. O.D. (2.3cm) long. .920" (41.9cm) 16.5" or silver. green, finish, black, O.D. twist rifling. 1:16" #100-003-815AS #100-003-816AS #100-005-206AS #100-011-199AS #100-015-935AS 100-801-003AS 100-801-004AS 100-801-001AS 100-801-002AS #100-003-814AS ------® " -28 2 / 1 ® 219.99 239.99 229.99 $ 259.95 $ 189.99 ab ® 10/22

® 10/22

® �������������� ab 10/22 ® .17 HM2 HM2 long; .17 " (41.9cm) RUGER 2 / 1 ����������������������������� RUGER ​4B239J27 ����������������������������������� RUGER ����������������������������������� ����������������������������������� 800-741-0015 ab

​3C208M06 ​3C178L60 ​3C225B88 ​3C218L46 "-28 tpi threads to accept popular brakes brakes to accept popular "-28 tpi threads 2 / 1 T3 Tension Barrel, T3 Tension .22 LR, .17 HM2, 10/22 Ultralight Target Barrel, Target 10/22 Ultralight Barrel, 10/22 Threaded UL Target Barrel, 10/22 Threaded Factory Taper .22 LR, Barrel, Target 10/22 Ultralight .22 LR, T3 TENSION BARREL Lightweight Yet Rigid For Superb Accuracy For Rigid Lightweight Yet BARRELS BEYER

6061 T6 aluminum, chrome-moly steel liner, anodized exterior anodized steel liner, 6061 T6 aluminum, chrome-moly ULTRALIGHT TARGET BARREL TARGET ULTRALIGHT SIGHT BARRELS N SIGHT BARRELS NG OPE X-RI Barrel - stainless, steel. 16.1" (40cm) long, 1-16" RH rifling, (40cm) long, 1-16" - stainless, steel. 16.1" Barrel 7075 T6 aluminum barrel, Cerakote finish, matte black. Chromal finish, matte Cerakote 7075 T6 aluminum barrel, NS SOLUTIO TACTICAL Designed To Make Your Rifle Lighter & More Accurate Accurate & More Lighter Rifle Your Make Designed To Lightweight aluminum barrel has a chromoly steel liner with has a chromoly Lightweight aluminum barrel Sleeved barrel saves weight while providing exceptional rigidity exceptional weight while providing saves Sleeved barrel Premium-quality aluminum alloy barrel gives the rigidity, stabil rigidity, gives the aluminum alloy barrel Premium-quality

WEAPON SYSTEMS PRIMARY rade Performance Without The Weight Penalty Of Steel Penalty Weight The Without Grade Performance Match- SPECS: SPECS: a polished 11 degree crown for enhanced accuracy. The ½"-28 enhanced accuracy. for crown a polished 11 degree suppressor favorite your mounting for perfect is muzzle threaded fiber a green sights feature installed iron Factory or compensator. both windage and sight adjustable for sight and a rear optic front Open sights can even be used even when a compensator elevation. or other muzzle device is mounted on your rifle. tpi thread pitch. Sleeve - carbon fiber, mate black, .920" (23.3mm) O.D. O.D. (23.3mm) black, .920" mate pitch. Sleeve - carbon fiber, tpi thread lbs. (595g) wt. 1.3 SPECS: SPECS: ed by a tensioned external carbon fiber sleeve. The match-grade The match-grade sleeve. fiber carbon external tensioned by a ed with all ammuni feeding reliable cut to ensure chamber is precisely tion types. Muzzle has and flash suppressors. Includes threaded muzzle cap for a finished muzzle cap for Includes threaded and flash suppressors. look with no accessory installed. for superb accuracy. Internal barrel is turned from a 1" diameter is turned from Internal barrel superb accuracy. for then surround stainless steel blank to an ultra-lightweight contour,

18" (45.7cm) long. Both models fit Ruger 10/22 .22 LR receivers only. models fit Ruger 10/22 .22 LR receivers long. Both - 18" (45.7cm) Orders/Tech: #100-007-120AS SPECS: SPECS: - 16 LR .22 O.D. (23.4mm) .920" loy steel liner. kote™ ceramic finish resists corrosion, scratches, and surface wear. and surface wear. scratches, corrosion, finish resists ceramic kote™ the muzzle. rifling at the protects crown Recessed target racy changes due to barrel heating. Custom match chamber in .22 Custom match heating. racy changes due to barrel precise steel liner with Chromalloy LR or .17 HM2, and button-rifled 60-grain subsonic even from accuracy, excellent 1-16" rifling for and may require to .001" oversized are shanks .22 LR ammo. Barrel bolt or bolt handle a heavy requires minor fitting; .17 HM2 barrel Cera durable, good-looking Tough, separately. available assembly, tually stronger than many mild steel alloys, yet gives all the benefits many mild steel alloys, yet than tually stronger accu to resist distribution heat including improved a thick barrel, of ity, and performance of a steel bull barrel without the excess weight. excess the without barrel bull steel a of performance and ity, easy-to- an affordable, from rifle target build a tack-driving you Lets match-grade to precise, machined action. Fully obtain Ruger 10/22 ac 7075 aluminum billet that’s hard exceptionally tolerances from #100-007-278AS #100-007-280AS #100-004-528AS #100-004-508AS muzzle brakes rifle #276-000-028AS #100-014-048AS #100-014-049AS muzzle threads. standard calibersfor long-range,hunt .300 UltraMag.Justasbeneficialwith hitting cartridgeslike .338Lapuaand brakes tamethefierce recoil of heavy- tion recommended. SPECS: 5 long andhas1 ing, andtacticalapplications. FBis3.3" (2.3cm) O.D. 3.2 oz.(91g) wt.Fits.30 caliberrifleswithstandard SPECS: proper timingandRocksett tohelpsecurely fixbrake intoplace. finish resists heat, corrrosion andwear. Includesshimstohelpwith pressor, itcanbeusedasastand-alone muzzlebrake. Blackntiride Exit holeis.292"andMUSTbeenlarged tomatch larger calibers. of bothcanbeturneddownasneeded. down to1"O.D. with2"OAL. Exteriors surface area, whiletheLBisscaled exit hole.Maximumopeningfor both is.338 caliber. Gunsmithinstalla OD, 3 Stainless steelconstructionfor superiorresistance topowdercor rise andblast.Dustprintingmuzzleare allbuteliminated. other calibers. .970"and (22mm) (2.5cm) diameter. enlargedbe can for hole Muzzle SPECS: U.S. militaryforces. be gunsmithenlarged tolarger diameter. Exclusive suppliertoelite rosion. For allcaliberscenterholeis.030" over bulletdiameter. May #504-000-020AS #504-000-014AS #504-000-010AS #504-000-004AS #504-000-019AS #504-000-002AS #504-000-001AS #504-100-022AS / 8 "-24 tpithreads. Gunsmithingrequired. Super-efficient stainlesssteel STOCK # Tames The Heavy Hitters - 1 / 4 " length,and7mmexithole.LBhas1"OD, 1 17-4 stainlesssteel,blacknitridefinish.2.47" (6.7cm) long,.939" 416 Stainlesssteelconstruction. Threads –

304 stainlesssteel,polishedfinish.2.6" (6.8cm) long..866" Customizable, Too MK13-SD MUZZLEBRAKE AMERICAN PRECISIO N ARMS R3E2C MUZZLEBRAKE 1 / 8 ADVANCED ARMAMET " O.D. for maximum .866" .866" .866" .866" .866" .866" .970" .970" O.D. LB MuzzleBrake, FB MuzzleBrake, 6G144H01 AAC MK13-SD MuzzleBrake, MUZZLE BRAKES ab CALIBER signed toaccepttheAAC MK13-SD sup and muzzlerisefor .30caliberrifles.De zle brake givessuperiorcontrol of recoil OPS INC .338 .30 .30 .30 .243 .243 .30 .22 muzzle gasestogreatly reduce muzzle with forward baffle, trapsandredirects � Machined 17-4stainlesssteelmuz Single, large expansionchamber Maximum Recoil Reduction Accepts AAC Suppressor PAGE E THREAD SIZ fficient MuzzleBrake With Reduced Blast 9 - 5 5 5 5 1 1 1 ​3Z135G53 ​3Z113P46 / / / / / / / / 16 2 2 2 8 8 8 8 "-28 tpi "-28 tpi "-28 tpi "-24 tpi "-24 tpi "-24 tpi "-24 tpi "-24 tpi ab

170 � � 5 15

/ 4K115A20 4K112C14 4K112H11 4K112C11 4K112C11 4K112P14 4K112B11 4K111A15 8 / ​ x24. FBhas1 16 " length,and PRICE FB $ 149.99 $ 149.99 LB $ 115.95 $ 115.95 $ 115.95 $ 115.95 $ 115.95 $ 115.95 $ 115.95 $ 117.99

124.99 5 / 8

"-24 ab 1 1 / / 8 4 - - - - - " " #246-199-001AS #246-000-010AS #246-199-005AS #246-199-006AS #246-199-002AS Die cuts14mm-1.0, left-hand,metricbarrel threads. ThreadAlign 1.0 Tap cleansandrestores threads, cuts new threads. 14mm-1.0 LH has twogasportswithaflashconetoredirect muzzleflash.14mm- chamber with 6 gas ports keeps muzzle rise to a minimum. 14mm-1.0 left-handthread barrels. AK-74 splitstheflash.Open Die -HHS, 1 long. SPECS: ment Tool alignsthreading dietobarrel. long, #100-003-719AS — Advise# — Advise# #339-202-338AS #339-201-308AS #339-111-308AS #339-101-308AS #339-201-284AS #339-111-284AS #339-101-284AS fast follow-up shots. or velocity-Reducesrecoil for comfort. Reducesmuzzlerisefor gases, and noise, away from the shooter. Does not affect accuracy tpi LHthread. 39mm). 2 39mm). SPECS: satin finsih.1.94" (49.3mm) longx.750" (19mm)O.D. Allcalibersare SPECS: tpi thread except .338 is Includes instructions. flats directly over theinternalthreads helpensure easyinstallation. flash. Includeswasherfor precise indexingof thesideports.Wrench chamber with side-facing ports help reduce recoil and hide muzzle Reduces Recoil & Muzzle Lift Without GENTRY Increasing Muzzle Blast OrNoise Krinkov Neatly controls theearshattering muzzleblastbydirecting the F Krinkov -3"(7.7cm) long.Slant -1.315" (3.3cm) long.14mm-1.0 LH 3 / A ENTERPRISES STOCK # 8 " shank. Steel, blued finish.Threadedblued Steel, 14mm-1.0 LH. Steel, polishedblue(PB),matte blue(MB)orstainlesssteel(SS), Steel, black,matte finish.Includeswasher. FitsAK-47(7.62 x 1 / LASH HIDER&COMPENSATORFLASH 8 " (5.4cm)" x long 1 / 2 " (3.8cm) diameter. 14mm-1.0 LHTap -HHS, 3 “QUIET” BRAKE Quiet Brake, SS, Quiet Brake, PBorMB, PRIMARY WEAPONS Krinkov MuzzleBrake, AK-74 MuzzleBrake, Thread AlignmentTool, 14mm-1.0 LHTap, 6B51D64 14mm-1.0 LHThreadingDie, 4B87G49 AK-47 FlashHider/Compensator, .338 .308 .308 .308 7mm 7mm 7mm ab ab 9 / CALIBER 16 SATISFACTION GUARANTEED "-28 tpi.Approx. 2 7 / � 8 " (22mm) diameter.(22mm) " oz.14"-12 wt. (57g) � � of sustained fire. Specialinternalblast stabilize themuzzleduringperiods liver superiorgasdispersiontohelp AK MUZZLEBRAKE Tames Muzzle Jump & Flash For AK-74 Aggressive, scallop-typecutsde 9C112B85 Improved Weapon Control SS SS MB PB SS MB PB FINSH ​6B53K23 SINCE 1939 AK-47 pattern rifleswith For 7.62mm, pre-ban, flash andrecoil control. tern provides effective 9C103B80 ab Reduces Flash & Recoil ​6B19N57 1 / 4 ​6B17P28 oz. (64g).wt. � Russian militarypat ​6B13J27 AK-742.8" - (7.2cm) 9 1 1 1 1 1 1 AK-47 / / / / / / / �

2 2 2 2 2 2 16 "-28 "-28 "-28 "-28 "-28 "-28 ​ "-28 THREAD SIZ � � � �

​ 5 / 8 $ 113.99 " (9.2cm) Krinkov 123.99 $ 22.99 $ 94.95 20.99 60.67 61.83 15.99 1 / 2 "-28 - - - #481-083-830AS #481-068-660AS #481-068-650AS #481-068-625AS #481-062-620AS #481-062-600AS — Advise# #481-062-570AS #100-009-788AS diameters (DIA.)andmaximumcalibers(MAX.CAL.)listedinchart. (15.7mm), .250" diameter bore exit hole is reamed for maximum recoil reduc by fivebaffles andfiveinternalchambers.After installation, nominal SPECS: sion machinedfrom solidsteel. tion andtoprevent bullethit(seereamers listedelsewhere). Preci .980" (2.5 cm),Wt.–4.9 oz.(139g). SPECS: taches tothemuzzlewith any caliberuptoandincluding.338;at picture astheshotbreaks. Works with to helptheshootermaintainsight duce felt recoil andcombat muzzlerise crush washers. it easytoindexthebrake correctly withouttheneedfor peelor #403-000-002AS #403-000-006AS #403-000-005AS #403-000-004AS #403-000-020AS #403-000-003AS #403-000-021AS #403-000-009AS must be drilled outfor.223.must be calibersabove Requires threading andindex with athread protector. matte finish.2"(5cm)long,.850" (22mm)dia,BL SPECS: ting to different barrel diameters. Adds 1 ing gasfrom blowingupdirtanddebris.Tapered shankfor easierfit quiet soundingbrake that’s easytoclean.Closedbottomkeeps exit muzzle blastawayfrom theshooter. Giveshighvolumeshootersa duction infelt recoil. Triple baffle, exhaustslotsredirect noiseand ing of barrel. Instructionsincluded. dia, Provides E SS Enjoy lessfelt recoil andabigreduction inmuzzleflipprovided Innovative muzzlebrake helpsre Three expansionchambersprovide upto45%measured re STOCK # PRECISION RIFLE COMPENSATOR E fficient MuzzleControlWithoutExcess Noise& Blast 3 / Steel, blackphosphate finish.Length –3"(7.62 cm), diameter– 4340 chrome molysteel.Blue(BL)or17-4stainlesssteel(SS), CM steel, blue, matte finish. 2" (5cm) long. O.D.:(5cm) long. matte2" blue, finish. steel, CM 4 " - 28; 9.80" -28; (24.8mm) dia.Hardenedhole, exit dia. .250 toRc42. #68 -.680" (17.2mm), #83-.830" (21mm).Fitsriflemuzzle ffective Recoil Suppression KDF MuzzleBrake, 1H110Q33 ab MAX. CAL. Precision RifleComp., SS SS BL BL SS BL SS BL Multi-Chamber Design For PRIMARY WEAPONS 8mm .458 .375 .375 .375 8mm 8mm 3 5 9 1 3 1 5 9 / / / / / / / / 2 8 4 16 2 8 4 16 "-28 QDBrake, "-28 QDBrake, "-28 QDBrake, "-28 QDBrake, "-28 QDBrake, "-28 QDBrake, ab "-28 QDBrake, "-28 QDBrake, 5 / 8 " x24 threads. Includedshimsetmakes Baffles & Chambers Arrest Recoil & KDF QUICK DISCHARGE DIAMETR ab .600" .660" .830" .620" .650" .570" .625" MUZZLE BRAKE - - 1 ND HOLLA / Muzzle Flip ​3K115P92 ​3K120Q37 ​3K120P37 BRAKE ​3K115N92 ​3K120K37 ​3K120H37 4 ​3K115P92 ​3K115C92 " to barrel length. Comes ​4B87I49 MODEL 3 / 4 68 68 68 83 62 62 62 " -28;975" (24.7mm) �

� � � � � � � � � THREAD SIZ 5 9 9 9 1 1 1 / / / / / / / #62 .620"- 2 2 2 8 16 16 16 "-28 "-28 "-28 "-24

"-24 "-24 "-24 $ 138.00 $ 119.99 $ 94.95 124.99 124.99 124.99 124.99 119.99 119.99 119.99 Office/Tech: ------with wingedfront sight. SPECS: winged front sight. sight pinandlockingsetscrew. FitsRugerMini-14 modelswithout damaging sightblade.Replacesthefront sight;attaches withfront more stable hold.Protective earsprevent bumpsanddingsfrom Adds extramuzzleweightfor a nearly eliminates muzzleflash. pattern that limitsrecoil and has afullcircumference hole W BLACK (14cm) long.6.4 oz. (180 g) wt.FitsRugerMini14 #555-000-006AS #555-000-007AS #555-220-300AS #555-000-002AS #555-000-001AS #555-220-400AS #555-220-301AS dia. Modelsfor Ruger10/22 completed. powder untilfullcombustionis style, extralength,maximum“burn.” SPECS: (6.3cm).860" long, (21.8mm) Longdia. (LG)3 - Thirty modelswillnot fit recent production rifleswithwingedfront sight. — Advise# — Advise# requires threading of barrel. reamed orbored .040" overbulletdia.Includesinstructions.Installation mately2 1S/1SS, 2S/2SS .872" (22.1mm);3S/3SS.875" (22.2mm).Addsapproxi Diameters: SPECS: light, mountainriflebarrels. (SL) models are smaller in diameter to blend perfectly on thin, ultra- the comptomatch thebarrel diameterduringinstallation. Slim-Line hole to.040" overbulletsize andfacebackthetaperat therear of recoil reducers andsave inventorydollars.Simplyopenuptheexit .250" diameter exit hole and tapered design, so you canstock fewer ears for noincrease intotalnoisetotheshooter. Allmodelsfeature a expanding, muzzlegasesforward, awayfrom theshooter’sfaceand cut downonpainful recoil. Elliptical,rear, exhaustholesforce hot, #762-110-500AS #762-110-625AS #762-110-562AS #762-111-500AS #762-111-562AS #762-110-775AS No STK# BLUED E GUNNERS CHOICE Traps unburnedparticlesof Gunsmithing Required For ffective FlashReduction LASH HIDER FLASH MASEN RUGER Steel, blue Machined steel, blued or stainless or blued steel, Machined Steel, black,matte finishorstainless steel,silver, matte finish.5 1 / 2 " (5.7cm)" barrelto hole exit diameter .250" length. ARRIOR MUZZLEBRAK-Singleexpansionchamber ASL/ASSL, 1SL/1SSL,.750" (19mm);AS/ASS.868" (21mm), Short - M16A1-style,extends1 Stainless Recoil Reducer, 2F87P15 Blue Recoil Reducer, 2F84L86 (BL) orstainlesssteel #762-120-500AS #762-120-562AS #762-121-500AS #762-121-562AS 6E40Q87 Slvr Mini-14 Muzzle Brake, 6E39F23 Black Mini-14 MuzzleBrake, 6E18M80 Mini ThirtyL Mini-14 L 10/22 SH, SSFlashHider, 10/22 L 10/22 SH, BLFlashHider, ab STK# SS

641-623-5401 NA NA ® , Mini-14 G, BLFlashHider, ® � ab G, SSFlshHdr, � � � G, SSFlashHider, Cuts Recoil & Muzzle Rise With RECOIL REDUCER No 3S/3SS 2S/2SS 1S/1SS AS/ASS 1SL/1SSL ASL/ASSL ® Model with multipleportsthat inter gases toincrease accuracyand rupt andalignexitingmuzzle , andMiniThirty (SS), mattefinish. Short(SH)–2 ab Increase n Blast Or Noise satin(7.6cm)(SS), 3" finish. long. Single expansionchamber 3 / 3/4"-16 5/8"-18 9/16"-18 1/2"-28 9/16"-18 1/2"-28 4 ​6E18D98 THRD ". 3 ​6E16A77 ​6E17F06 ​6E14I96 / Long - Soviet,AKM- 8

® " (8.5cm).860"long, ​ � . Willnot fitmodels

​

® . Mini-14 andMini ​ � .762" thru.830" .640" thru.710" .585" thru.680" .540" thru.680" .545" thru.680" .510" thru.650" FITS BBLDA. � � � � be must $ 99.99 105.95 $ 41.99 $ 15.99 43.99 20.99 18.99 19.99 17.99 1 1 / / 2 2 - - " " rifle muzzle brakes - - ab 99.99 $ 81.99 $ 99.99 171

�������� ���������� ������������ " (1.6 " (1.6 8 / PAGE 5 ​1E85F71 ​1E82J76 ​7K73H92 N K31 SCHMIDT-RUBI " (4.8 cm) high. 1.3 oz (37 g) oz cm) high. 1.3 " (4.8 8 / 7 -

K31 Clamp-on Brake, Lock, Std Gas Cylinder Lock, Navy Gas Cylinder tab at Go to the Learn tab at Want To Know Know To Want " (2.2 cm) wide, 1 8 / CLAMP-O BRAKE N MUZZLE 7 brownells.com to view intro to view intro brownells.com About What NEW Products We Just Products We 8620 steel. Parkerized, black, matte finish. black, matte 8620 steel. Parkerized, Steel, blued finish. 3" (7.6cm long), 1" (2.5cm) O.D., 4.8 oz. (136g) wt. oz. 4.8 O.D., long), 1" (2.5cm) Steel, blued finish. 3" (7.6cm Added This Week? PRODUCTS SWISS videos and articles on your gun. Precision machined, machined, Precision Fast Follow-Up Shots Follow-Up Fast Reduce Felt Recoil For For Recoil Felt Reduce vice rifle helps improve improve vice rifle helps get you accuracy and quickly for back on target drilling, pin muzzle to eliminate shots. Clamps to the fast follow-up to help limit re rear muzzle blast to the Redirects ning or threading. dust printing. Solid bottom section eliminates push. coil to a soft SPECS: modern muzzle brake brake modern muzzle popular K31 ser the for #100-002-993AS #851-000-059AS #851-000-058AS sor with a Smith Enterprise Direct Connect Vortex Connect Vortex Direct sor with a Smith Enterprise an integral sight or other style flash hiders without alignment proper ensure dovetail. Timed threads rifle fits M14/M1A when fully tightened. Standard Model 0 MK14 model fits Navy Navy with 22" barrel. rifle with 18" barrel. SPECS: wt. Available for standard and Navy model rifles. standard for wt. Available cm) long, " " - - - - 16 16 - / / 3 15 59.99 93.99 $ 59.99 $ 89.99 $ 94.99 G6-A3 ​ ​

- 2 tpi. .735" "-24 8 "-28 tpi. 2.31" (5.9cm) (5.9cm) "-28 tpi. 2.31" ​ 2 / ​

5 /

1

G6-A2 - - - ������������������������������ - ab has smooth exterior. exterior. smooth has G6-A2 "-24 tpi x .735", "-24 "-24 tpi x .635", "-24 8 8 as, Hide Muzzle Flash Muzzle Hide Gas, / / 5 5 ​1E82L86 ���������������������������������������������������� ����������������������������������������������������� ������������������������������������������������������ ������������������������������������������������������ - Threaded, deep skirt de EX - Threaded, CT VORT NTERPRISE E SMITH "-24 thread pitch and thread "-24 8 6-A2 Vortex, G6-A2 AR-15/M16 1E58H00 Vortex, G6-A3 AR-15/M16 1E57I54 .308 Vortex, .308 Vortex, .308 Vortex, M14/M1A Direct Connect Vortex Direct Connect Vortex M14/M1A Flash Elim., 1E89F06 1E88G96 / 5 E CT CONN FLASH VORTEX ATOR ELIMI N Helical Flutes Dissipate Dissipate Flutes Helical 8620 steel. Parkerized, black, matte finish. .595"-32 tpi. 3 finish. .595"-32 black, matte 8620 steel. Parkerized, 8620 steel. Parkerized, black, matte finish. black, matte 8620 steel. Parkerized, 8620 steel, Parkerized, black, matte finish. black, matte 8620 steel, Parkerized, - Streamlined unit reduces reduces unit ORTEX - Streamlined Four, specially angled flutes hide nearly 100% of muzzle flash, flash, muzzle of 100% nearly hide flutes angled specially Four, #851-000-032AS #851-000-060AS #851-000-047AS #851-000-084AS #851-000-091AS .308 V 15° helical flutes. muzzle flash with four, Reming for technology Vortex Provides and AR-style Savage, ton 700 Tactical, a Smith En to accept .308 rifles. Grooved suppres Connect sound terprise Direct Comes with sor. SPECS: ing installation and removal of the suppressor is easier. suppressor the of and removal ing installation SPECS: ment trainers, and permits installation of of installation permits and trainers, ment sound CQB the Smith Enterprise M4DC factory (available and flash suppressor customers). FMS and to USG/LE direct no washer. design requires Thread-on to 10 ft. lbs. maximum, self- Torque Use M-193, tightens as weapon is fired. of highest degree and MK 262 service ammo for (M855), SS-109 M4 long, to 14.5" attached permanently be Can flash suppression. 16.1". of length an overall for barrels help on the outer surface that model adds helical grooves G6-A3 mak and the M4DC, between the Vortex carbon buildup minimize riers, then heat-treated to provide a high-strength core and tough, core a high-strength to provide riers, then heat-treated gas to exiting barrel helix design helps align outer shell. Special, with all bullet types. accuracy improve EX - VORT G6-A3 G6-A2/ AR-15/M16 conceals gap between Skirt extension shoulder and flash hider on AR- barrel base and M4 rifles. Grooved M16, 15, Blank Firing of ring allows integration law enforce used by (BFA) Attachment (7.5cm) long, .905" (2.3cm) dia. 3.9 oz. (112g) weight. Fits Remington 700 Fits (112g) weight. oz. dia. 3.9 (2.3cm) .905" long, (7.5cm) long, - 3" (7.6cm) length. .635" thread with .735" .308 and AR-style Tactical FCP Fits Savage 110 (130g) weight. oz. length. 4.6 thread dia., .635" .905" and others. Noveske, DPMS, rifles from and AR-style .308 sor compatible for military and law enforcement use. military and law enforcement for sor compatible SPECS: DIRE M14/M1A direct a clean-looking, sign provides Self- barrels. connection to M14/M1A need tightening, helix design eliminates of removal Requires a lock washer. for with sight and replacement OEM front Gas Cylinder Smith Enterprise M14/M1A and sound suppres BFA is desired. sight Lock Sight Dovetail if front IL - Machined, ETA SIGHT DOV GAS CYLINDER LOCK M14/M1A steel, gas cylinder lock with milled dovetail allows you to mount an the flash suppressor. from sight separate front OEM or aftermarket issue suppres the standard when replacing choice The perfect (8.1cm) long. .858" (22mm) dia. 4.1 oz (116 g) wt. Fits M14 and M1A rifles. g) wt. Fits M14 (116 oz (22mm) dia. 4.1 long. .858" (8.1cm) even during full-auto fire, by dissipating gas and retaining unburned retaining gas and by dissipating fire, even during full-auto 8620 the same of burn. Constructed residual increased powder for car bolts and AR-15/M16 of used in the manufacture bar stock steel long, .858" (22mm) dia. 3.1 oz. (88 g) weight. Fits AR-15, M16, and M4. M16, Fits AR-15, (88 g) weight. oz. (22mm) dia. 3.1 long, .858" thread length thread .635" length or thread .735" .308 rifles with the 110 FCP bolt action and AR-style to fit Savage Also fits 6.8mm DPMS and Noveske. spec, including shorter thread specs. SPC rifles with these muzzle thread order on the web - - 59.99 TPI 64.99 68.99 $ 53.99 $ 59.99 $ 59.99 1/2"-28 1/2"-28 9/16"-24 9/16"-24 5/8"-24 9/16"-24 5/8"-24 7/16"-28 5/8"-24 brownells.com ����� 1/2"-28 5/8"-24 9/16"-24 ® THREAD SIZE ����������� ����������� ������������� ab

#1 #2 #2 #3 #3 #4 #4 #01 .865" ab ������������������� ��������������������� 10/22 Model ​3Z45K89 ® " (7cm) long, 1.2" (3cm) out - - 4 / 3 ab N PRECISIO SHREWD

NT BRAKE VARMI Reduced Recoil & Dust Printing & Recoil Reduced STK# SS #860-110-156AS #860-110-162AS #860-110-150AS STK# SS .560" long. Outside diameter; #01 - .560" " (6.6cm) 8 / 5 #860-101-325AS #860-101-128AS #860-101-228AS #860-101-425AS #860-101-324AS #860-101-224AS #860-101-028AS #860-101-424AS #860-000-002AS Black Stabilization Mod, Black Stabilization SHREWD CM Varmint Brake, 6H52C53 Brake, CM Varmint 6H60B03 Brake, SS Varmint Shrewd Muzzle Brake, 6H38Q03 Shrewd Muzzle Brake, CM .865" Muzzle Brake, 6H38E03 Muzzle Brake, CM .865" 6H45L47 Muzzle Brake, SS .865" N MODULE STABILIZATIO MUZZLE BRAKE MUZZLE N RUGER VOLQUARTSE Ready-To-Fit Brakes Brakes Ready-To-Fit .850" (21.6mm), (21.6mm), #3 - .850" (17.7mm), #2 - .700" (15.8mm), #1 - .625" nhance Recoil Control Recoil Enhance Chrome moly steel (CM) in-the-white or stainless steel (SS), Chrome in the white or 416 stainless moly (CM), in the white or 416 steel, chrome 4140 Aluminum, black teflon coated. 2 Aluminum, black teflon coated. STK# CM STK# CM Aligns exiting barrel gas so it surrounds so it surrounds gas Aligns exiting barrel Multi-port brake softens felt recoil and reduces muzzle rise. A muzzle and reduces recoil felt softens Multi-port brake Multi-port brake softens and reduces recoil and muzzle flip. and muzzle flip. recoil and reduces softens Multi-port brake Clamp-On, Instant Muzzle Stability #860-110-050AS #860-110-056AS #860-110-062AS side diameter. SPECS: SPECS: curacy. Turned from lightweight alumi from Turned curacy. num so it won’t change the balance or feel diameter bull barrels. your rifle. Clamps to .920" of gled 7° forward, provide maximum recoil control. Blast and sound control. maximum recoil provide gled 7° forward, and Non-vented top the shooter. away from forward, directed are rise while limiting dust signature. muzzle bottom surfaces reduce exit diameter (nominal) .220" a with Comes required. Gunsmithing larger than bullet diameter. must be opened up to .020" hole that Rear exterior of caliber. to allow bullets up to .44 Can be enlarged to barrel. comp can be machined to conform SPECS: pitches listed below. thread Available finish. 1" O.D. 2" (5cm) OAL. natural single expansion chamber and 42 total ports, 21 on each side, an single expansion chamber and 42 total ports, 21 on each and stabilizes the bullet for increased ac increased the bullet for and stabilizes #860-100-028AS #860-100-128AS #860-100-228AS #860-100-224AS #860-100-324AS #860-100-325AS #860-100-424AS #860-100-425AS #860-000-001AS — Advise # — — Advise # — #930-122-015AS SPECS: SPECS: finish. 2 steel (SS), satin (14.2mm), (14.2mm), (22mm). .865" - 1" (2.5cm), #4 Multitude of gas dispersion holes have an offset pattern, and a 7° a and pattern, offset an have holes dispersion gas of Multitude to blast and sound forward moves effectively that rake, forward exit hole must bore noise deflection. .22 caliber maximum provide comp can be Rear of bullet diameter. over to .020" be opened up outside is correct Brake .865" contour. to blend with barrel tapered that with a 6mm exit hole Lone Eagle pistols. Furnished diameter for caliber. up to .44 can be opened — Advise # — — Advise # — — Advise # — - - - "-20 8 / 5 49.99 $ 57.95 $ 94.99 159.99 � $ 139.99 ab ��� � ab ���� ​

AK-47 Compensator AK-47 M14/M1A model designed for for designed model ​2E89M16 �� ​6D49Q99 ​1E137B33 �� " (5.7cm) long, 4 oz. (113 long, 4 oz. " (5.7cm) ​1E150H09 4 / 1 AK-47/74 - 800-741-0015 AK-47 Nightbrake Compensator – – Compensator Nightbrake AK-47

Reduces Recoil & Muzzle Lift Muzzle & Recoil Reduces " (3.8cm) dia., 2 " (3.8cm) ����� ������������������������������������������������ Dual, curved restrictor plates increase increase plates Dual, curved restrictor ATOR ELIMIN RECOIL calibers up to .358. -28" for 2 2 AK-74 Compensator AK-74 / 1 / 1 surface area to tame recoil by pulling the to tame recoil surface area Sights and optics stay on forward. barrel Tapered shots. repeat fast for better target to .600" from nut allows fitting to barrels - -

Mzzle Brke, 2001 M14/M1A Mzzle Brake, 2001-NM Eliminator, Recoil Tapered 6D57L95 Compensator, Nightbrake AK-47 Nightbrake Compensator, Nightbrake AK-47 Smith Enterprise asy, Bolt-On Bolt-On Easy, model reduces recoil and virtually eliminates muzzle eliminates and virtually recoil model reduces n” Muzzle Brake “Good Iro ARMS NTICORE MA Installation Item ab

Brake - 8620 carbon steel, salt bath nitrided finish, matte black. nitrided finish, matte bath - 8620 carbon steel, salt Brake

NSATOR COMPE NIGHTBRAKE Steel, blued, matte. 1 Steel, blued, matte. 8620 steel, black oxide finish. 2.5" (62mm) long. 1.1" (27mm) O.D. (62mm) long. 1.1" (27mm) O.D. finish. 2.5" 8620 steel, black oxide AK-74 AK-74 Control; ffective Recoil & Muzzle & ffective Recoil With 922(r) With E Absolutely no gunsmithing re Light, short com Light, short

Muzzle Device Muzzle Compliant Part Replace Factory Replace JP ENTERPRISES 851-000-098AS #851-100-014AS Does not fit SOCOM short rifles or Norinco/Polytech/ fit SOCOM Does not NOTE: tpi threads. long; 2001- (7.6cm) 2001 - 3.4" threads. M305 rifles with metric M15x.75 long. (10.8cm) - 4.25" NM SPECS: SPECS: (21mm) O.D. drawn barstock steel. .860" cold - 1144 Rear Mount rel. Two-piece design, with the brake itself is made from extremely extremely itself is made from with the brake design, Two-piece rel. then to Rc 60 surface hardness, treated durable 8620 steel, heat finish. Rear mount is nitrided with a corrosion-resistant salt bath tensile durability, excellent for steel fatigue-proof 1144 from made sight dovetail with a standard and yield characteristics, strength, the profile model replicates Match National on the top. 2001-NM use in CMP and other it legal for making the USGI flash hider, of matches. quired for excellent muzzle control muzzle control excellent for quired Navy/ This rifles, select-fire even on recoil, felt reduced greatly and push into a soft changes the sharp recoil brake pattern Coast Guard shots, even with rapid follow-up to help you achieve extremely in felt a 25-35% decrease ammo. Produces NATO 7.62 hard-hitting in muzzle climb over USGI flash and nearly a 100% decrease recoil to the bar without alterations which it easily replaces suppressor, g) wt. Exit hole must be drilled to .040" over bullet dia. g) wt. Exit hole must be drilled to .040" SPECS: SPECS: .650" diameter. Threaded Threaded diameter. .650"

#452-017-528AS Orders/Tech: 14 x 1L metric threads found on most AK-47 rifles. Outer diameter is on most AK-47 found x 1L metric threads 14 and other acces 22mm allowing use with bayonets standard NATO shooter’s eyes, and portless flash away from rise. Angled ports direct prone. from when fired dust signature reduces lower arc SPECS: threads. (93g) wt. Fits oz. 24mm 3.3 x 1L metric (51g) wt. Fits 14 oz. 1.8 (22mm) O.D. (45mm) long. .86" 1.8" washer. silicone Includes high-temperature threads. sories. AK-47 AK-47 922(r) compliance. and count toward ica pensators and flash hid flash and pensators be your rifle. Can down weighing without and flash recoil reduce ers up to .311" in diameter. firing projectiles used on Kalashnikovs safely use. Made in Amer hard of lifetime construction for Machined steel #100-009-537AS #100-009-539AS muzzle brakes rifle 100-015-977AS #100-010-536AS #100-012-975AS #100-011-969AS self-tightening designeliminates needfor alockwasher. Installai gases to help improve accuracy potential with all bullet types. The in full-auto fire and the special helix shape helps align exiting barrel four, specially-angled flutes to virtually eliminate muzzle flash, even and readily acceptstheSEIM14DC WindTalker suppressor. Ituses steel, the Direct Connect flashhider attaches to M14/M1A barrels SPECS: sure asecure fit. 9 (8.1cm) long..858" (22mm)dia.4.1 oz (116 g)wt.FitsM14 andM1Arifles. SPECS: separately. Smith EnterpriseM12/M1AGasCylinder LockSightDovetail,sold tion requires removal of OEM front sight. To regain front sight, install devices with long, flangeis.105"thickx¾"wide. #817-000-002AS a gentlepush.Features asolidbottomtoprevent dustprinting.In holes reduce felt recoil andmuzzlerise,replaces thesharpkickwith front baffles andsidevent stabilizer. Combination of reducing muzzle brake/ suppressor witharecoil to replace theM1Aflash and instructions necessary SPECS: for quickandeasyreplacement. cludes muzzlebrake/stabilizer, hexwrenches andCastlenutpliers #851-000-060AS / Diffuses Recoil; Practice 16 Shooting Longer With "-24 threaded muzzle.Precisely-machined Class3threads en All of the parts, tools LASH DIRECT CONNECT VORTEX FLASH Steel, black,matte finish.4 416 stainlesssteel,matte blackoxide ornatural silver finish. 8620 steel. Parkerized, black, matte finish. .595"-32 tpi. 3-3⁄16" tpi. .595"-32 finish. matte black, Parkerized, steel. 8620

Less Pain MUZZLE BRAKE/STABILIZER Item

ab SMITH ENTERPRISE 5 SPRINGFIELD ARMORY / 8 " x24 threads toanyfirearm that hasa MUZZLE THREAD ADAPTER ab Silver, Black, Silver, Black, 9 9 1 1 7A74E26 M1A MuzzleBrake/Stabilizer, Flash Elim., M14/M1A DirectConnectVortex / / / / 2 2 16 16 "-28 to "-28 to "-24 to "-24 to PRECISION ARMAMET ​2D25N11 ​2D20H70 ​2D27H00 ​2D24C67 � 5 5 / / 5 5 / / 8 8 "-24 Thread Adapter, "-24 Thread Adapter, 8 8 "-24 ThreadAdapter, "-24 Thread Adapter, ​1E86M20 1 / 4 " (10.7cm) long. PAGE � � � � � Machined from barstock Accepts Suppressor & ELIMINATOR Virtually M14/M1A �

Muzzle Flash 172 you toattach muzzle steel adapterallows Attaching Muzzle Brakes & M1A Rugged stainless

Suppressors Eliminates ​ Ideal For 1 / 2 "-28 tpior 5 / $ 89.00 $ 26.99 $ 89.99 8 "-24 26.99 29.99 22.99

5 / 8 - - - " #851-100-001AS #840-000-049AS x 28tpi.Bore holeis.26" (6mm). .848" (21mm)diameter, 4.3 oz. (124 g)wt. Tune inyourrifle’saccuracyby“dialingin”themuzzlebrake for reduces recoil and increases accuracyonyourheavy-barrel rifle. Tubb 2000rifle.Drastically that David Tubb uses on his and M1A.Gaslockwrench recommended for installation. to yourprized rifle.Notlegalfor serviceriflematches. lock andreplace withthisbrake. Requires nopermanentalterations to theM1Garand.Easyinstall,simply remove the gascylinder or feel of therifle.Agreat devicefor introducing youngershooters diminishes muzzleliftandfelt recoil withoutchangingthebalance SPECS: SPECS: and counteractsthetorque of bullettravel through thebarrel. Five-port designcatches excess gastoprovide aneffective brake perfect spot,snugitdownsecurely withthethreaded lockingnut. vibration and control harmonic vibration. Once you’ve found the wards or backwards to find exactly the right spot to dampenmuzzle 5 SPECS: from 1144 Stressproof vide ahigh-strength core andtoughoutershell.Gaslockis made precision machinedfrom 8620barstock,thenheat-treated topro during periodsof sustainedfire. Flashhiderandcompensator are ports deliver superior gas dispersion to help stabilize the muzzle fast follow-up shots.Specialinternalblastchamberwithside-facing tor controls muzzleflipandfelt recoil for improved accuracyand sights. Kitinstallation requires nopermanentalterations torifle. sights ortheSmithEnterpriseMatch orCloseCombat Tritium front gas lockdovetaildeckallowstheuseof standard issueUSGIfront 1 retains unburnedpowderfor increased residual burn.Compensa preserve nightvision,evenduringfull-auto fire. Dissipates gasand features four, speciallyangledflutestoreduce muzzleflashand weapon meetschangingmissionrequirements. Vortex flashhider (5.9cm) long.NutOD1"(2.5cm), long x.900" (23mm)dia.5.6 oz (158g)wt. #851-000-079AS / Dampen Barrel Vibration 5 8 / "-24 tpiO.D. threads. Vortex &Compensator -8620steel.3 16 " (3.3cm) long, Tune Your Rifle The samemuzzlebrake T2K TUNEABLEMUZZLEBRAKE Parkerized, black,matte finish.GasLock -1144 Stressproof Machined steel,manganesephosphate finish.2 Carbon steel,blackoxide finish.Brake OD1 SMITH ENTERPRISE SUPERIOR SHOOTINGSYSTEMS SMITH ENTERPRISE 13 / 1E143N49 M1 GarandMuzzleBrake, Tuneable MuzzleBrake, SOCOM 16Kit, 16 " (2.1cm)wide,1 In & SOCOM 16KIT ® steeltosurviveheavy recoil. Heightof the SATISFACTION GUARANTEED Drop-On CompMakes TheMightyM1 Easier & More Comfortable To Shoot � � M1 MUZZLEBRAKE Dual chambercompensator greatly 3 / 4 " (1.9cm) long.Threads are 13 ​1E251L77 / 16 " (4.6cm) high.5.6 oz (158g)wt. 5 M1 GARAND / SINCE 1939 8 "-24 tpiI.D. threads. FitsM14 M14/M1A allows fastinterchange and Compensator so Vortex flashhider ability of theincluded Interchangeability ​4H95A65 �

Of Flash Hider & Threaded gaslock ​ Compensator Allow 1 / 1 / 16 2 " (2.8cm), 2 " (6.3cm) long, ab � Easy 3 3 / $ 149.99 / 4 $ 259.99 4 " (9.5cm) " (1.9cm) $ 99.99 ® steel. ab ab 5 / 16 - - - - " #100-006-650AS matte black.2 SPECS: with theU.S. CodeTitle18Section922(r). threaded barrels. Counts asoneU.S.-made partfor compliance flash andtamerecoil onAK-type rifleswith14mm‑1 left-hand spaced holesandslotsredirect muzzleblastandgasestominimize rock, glass,andinteriordoorsfor tacticalentryoperations. Evenly- #100-013-734AS appearance of AK-74 brake com 7.62x39 AK-47 barrels andgives O.D. .989" (2.5cm). 14 x1LHthreads. SPECS: U.S. partfor 922rcompliance. phosphate finishresists heat, wearandcorrosion. Countsasone commony found onAK-47 barrels chambered in 7.62x39. Tough making iteasytodeliverfollow-up shotsrapidly. Fits14 x1LHthreads duces felt recoil andmuzzlerise, monly found on 5.45x39 rifles. Re #100-004-545AS #100-004-546AS #100-004-547AS 922(r) part-source requirements. keep yourgunincompliancewiththeU.S. CodeTitle18Section reduces dustprintingwhenshootingprone. MadeintheU.S.A. to alternate stylingandrecoil reduction, withasolidundersidethat felt recoil whilegivingyourAKadistinctiveappearance.Slotoffers is patterned after theRPKlightmachinegunbrake tohelpreduce climb-reducing properties of theoriginalAK-47 muzzlebrake. Cage for easy, fast installation. compliant partsfit the standard 14mm-1 LH thread AK muzzle rise and help dampen felt recoil. High quality, affordable, 922(r)- these replacements for thefactorymuzzlebrake decrease muzzle ‑ Phosphate finish,matte black.1 x 1 LH muzzle threads.muzzle x 1LH Slant ‑1 SPECS: 1 51 / Helps Reduce Muzzle Flip& 64 Gives Unique Appearance Steel muzzlebrake fitsonto Machined from steel withablack phosphate orbluedfinish, " (4.5cm) long, For 1215 cold rolled, heat-treated steel, manganesephosphate finish, Steel, allexcept Cagewithblued,matte finish.Fitsstandard 14mm Steel, blackphosphate finish. 3"(7.6cm) long.I.D. .378" (.9cm). AK-74 MUZZLEBRAKE STYLE E fficient MuzzleControl& The Look You Want RAZR™ MUZZLEBRAKE 3 / 4 " (7cm)long, 11 RAZR MuzzleBrake, 5A20E81 Tapco AK-74 StyleMuzzleBrake, Slot MuzzleBrake, Cage MuzzleBrake, Slant MuzzleBrake, / MUZZLE BRAKES TAPCO AK-47/AMD 16 " (1.7cm) O.D. TAPCO AK-47 TAPCO AK-47 Slant incorporates the look and muzzle 7 / � 8 " (2cm)OD. 2.4 oz. (68g)wt. 5 / 19 16 ab / " (3.3cm) long, 32 - - ab " (4cm)long, ​5A13G38 penetrate wood,sheet has four prongs shapedto ened steelmuzzlebrake ​5A8E68 ​5A13M38 Distinctive Appearance ​5A24C03 ab For Tactical & Entry Aggressive Prongs Unique-looking hard 11 11 / / 16 16 " (1.7cm) O.D. Cage " (1.7cm) O.D. Slot ‑ � � � �

​ $ 24.99 $ 21.99 $ 9.99 13.99 13.99 Office/Tech: - - — Advise# — Advise# muzzle gasestoenhanceeffective recoil-control. Features at noise. Multiple venturiexpansionchamberdispersesand redirects .875" Brake is1 416or steel in-the-white stainless (CM), 416or steel in-the-white stainless (CM), 11 SPECS: steel. O.D. of 1"barrels; available instainless .800" (20mm).1"works wellonlarge .875" in alarger, varmintweightcontour. VARMINT BRAK E -Sameperformance SPECS: barrel contours. down to.650" (16mm)tomatch thinner rifles. .750" (19mm)O.D. canbeturned and saves weightoncarbinesorlighter a short,compactbrake that looks “right” MICRO-BRAKE -Sameperformance in of barrel. #2-.750" (19mm)dia., less steel(SS).2"(5.8cm) long.Approx. 1.6 oz. (46g)wt.Requires threading SPECS: to allsides. centerline of thebore todispersemuzzleblastandsoundequally tenuating holesthat are bothhorizontal andperpendiculartothe Requires threading of barrel. dia., — Advise# — Advise# — Advise# — Advise# — Advise# #927-160-308AS #927-000-008AS #927-000-019AS #927-000-018AS #927-170-100AS #927-150-458AS #927-150-375AS #927-150-358AS #927-150-338AS #927-150-308AS #927-150-284AS #927-150-270AS / STK# CM.875" 16 "-24 tpi STK# CM STK# CM 9 / 16 (22mm)O.D. maybeturnedto ab "-32 tpi;#12 - .875" (22mm)dia., NA NA NA NA NA NA Stressproof Stressproof Stressproof ab RIFLE MUZZLEBRAKE 3 / SS MuzzleBrake, 7B106E31 CM MuzzleBrake, 7B90K86 SS 1"Varmint Brake, 7B124K84 SS .875" Varmint Brake, 7B106H31 CM .875" Varmint Brake, 7B90N86 SS Micro-Brake, 7B106J31 CM Micro-Brake, 7B91C03 4 " (4.4cm) long, ab ® ® ® chromemoly steel #927-000-013AS #927-161-284AS #927-161-308AS #927-161-243AS #927-161-223AS chrome molysteel chrome molysteel #927-000-004AS #927-000-006AS #927-000-003AS STK# SS.875" #927-151-284AS #927-151-308AS #927-151-270AS #927-151-338AS #927-151-257AS

641-623-5401 STK# SS #927-000-009AS #927-000-022AS #927-000-010AS #927-000-023AS crease inmuzzleblastorexcessive relief from painful recoil withnoin persing holesprovides excellent VAIS STK# SS 5 Superior Recoil Control; Muzzle / 8 "-32 tpi.1"Brake is2"(5.1cm) long, NA An incredible maze of gasdis 1 / 2 . 1 (SS). . Require(SS). threading of barrel. 5 "-32 tpi; in-the-white or 416(CM), in-the-white stain / 8 #927-000-026AS #927-000-025AS "-32 tpi. Blast Reduction STK# SS1" 3 / Caliber � 4 � " (4.4cm)" long. .257 .458 .375 .358 .338 .308 .270 � 7mm #6 -.812" (21mm) � NA NA NA � � � Caliber Model Caliber .223 .308 .270 .243 7mm $ 94.99 $ 94.99 $ 94.99 1 109.99 109.99 109.99 129.99 7mm 6.5mm 6mm .223 .308 / 2 2 8 6 6 4 2 4 12 "-32 tpi. "-32 - - - - rifle magazines & parts magazine releases - -

34.99 34.99 34.99 not in- cluded $ 12.99 $ 34.99 $ 29.99 Magazines

173 ®

��������� ​ ​ " (9.3cm) long x " (9.3cm) �����������

16 ​ / ​ 11

® - 10/22 - PAGE ® ab " (3.6cm) wide. Includes wide. Includes " (3.6cm) ​8K33P02 ​8K33I02 16 / 7 10/22 ® RUGER Aluminum, anodized, black, silver, black, silver, Aluminum, anodized,

ab RUGER Extra long lever extends over 3" and over 3" extends lever long Extra ����������������������������������������������������� asy Release Easy For Fast, Long Extra ����������������������������������������������������� ����������������������������������������������������� ����� ������������������������������������������������� " (1.25cm) wide. 2 / odized for durability. Available in a black or Available durability. for odized receiver, your finish to match silver matte contrast. Drop- or blue to provide or red in fit. SPECS: finish. 3 or blue, matte red, 1 features contoured finger grooves for an for finger grooves contoured features easy grasp and positive magazine release, even when wearing gloves. Unique design solid aircraft machined from is precision an grade aluminum billet, then hardcoat NS SOLUTIO TACTICAL

3Z26L15 Speed Catch Magazine Release, Magazine Speed Catch 10/22 BX-25 Magazine Coupler, 10/22 BX-25 3A12G01 8K33H02 xtended Mag Release, Black, Extended Mag Release, 8K32A32 Silver, Extended Mag Release, Red, Ext. Mag Release, Blue, Ext. Mag Release, ab EXTENE RELEASE NDED MAGAZI Super-Fast Reloads Super-Fast Ready Position Ready Colors AK-47/SAIGA POWER CUSTOM POWER NS SOLUTIO FIREARM SUPERIOR RAM For Fast Reloads In The Reloads Fast For SPEED CATCH CATCH SPEED Steel, powder coated, black finish. 1 black finish. Steel, powder coated, Injection molded polymer, matte black. Fits matte Injection molded polymer, Extended magazine release enables enables release Extended magazine Durable, molded polymer coupler holds two Holds Two Ruger BX-25 Magazines For Magazines BX-25 Ruger Two Holds E RELEASE N MAGAZI mounting hardware. mounting magazine release. existing of removal quires SPECS: lightning-quick reloads without your without reloads lightning-quick with your release the Just press your shoulder. rifle ever leaving pistol the your palm wrapped around while keeping trigger finger hand, all in one magazines with your opposite grip, and change steel, sheet gauge 16 heavy-duty, from laser-cut motion. Precision Optional durability. for powder coated then welded in position and rivet. threaded or a removable rivet a permanent with installation Built slightly left- and right-hand operators. use by for Ambidextrous rifles, commercial fit on AK-47 a precise to help ensure oversized fit gauge shotguns; does not bore/20 Saiga rifles, and Saiga .410 re recommended, installation Saiga 12 gauge shotguns. Gunsmith #100-004-600AS tion. Adjustable Allen screw controls tension, controls tion. Adjustable Allen screw Includes magazine placement easy. and makes two couplers. SPECS: Ruger 10/22 BX-25 magazines. Includes two cou plers and Allen wrench. NE COUPLER MAGAZI BX-25 Ruger BX-25 magazines side-by-side to enable Ruger BX-25 wasted mo by eliminating reloads super-fast #713-000-152AS #100-003-817AS 100-801-005AS 100-801-006AS #100-003-818AS " - 8 / 7

19.99 $ 27.99 $ 19.99 $ 24.99 $ 24.99 ​ ​

​ ​

" (1.9cm) tall, " (1.9cm) 4 ab / �������������� 3 ® - " (4.7cm) " (4.7cm) 8 / 7 asy Mag Changes Mag Easy ab ​3Z21B95 10/22 ® M14/M1A RELEASE POWER CUSTOM POWER AK-47/-74/SAIGA " wide. Minor fitting may be ���������������������������������������������������� ���� ������������������������������������������������� ����������������������������������������������������� ����������������������������������������������������� 16 / 13 asily Remove Magazine & Easily Remove Quickly Machined from billet steel, this extended Machined from Oversized For Fast, Fast, Oversized For " (1.3cm) longer than stock part. " (1.3cm) Direct replacement for the standard magazine the standard for replacement Direct 2 / SKS EXTENE NDED MAGAZI 1 MAG PRO 3Z16G47 xtended Magazine Release, Silver, Extended Magazine Release, 3Z16Q47 Black, Extended Magazine Release, SKS Extended Magazine Release, 3A20C09 7H26M16 xtended Mag Release, Extended Mag M14/M1A Mag Catch, Tactical magazine release allows you quickly and easily magazine release tive mag release. Also helps you drop the empty drop Also helps you tive mag release. catch on AK-47 style firearms has a larger contact has a larger style firearms on AK-47 catch fast, posi leverage for gives you more surface that E CATCH NE MAGAZI TACTICAL " (2cm) high x 16 / 13 NS SOLUTIO FIREARM RAM SUPERIOR 4150 carbon steel, Parkerized finish. 1 Parkerized 4150 carbon steel, Aluminum, silver, anodized finish or black teflon finish. Extends anodized Aluminum, silver, Steel, powder coated, black. Contact pad is black. Contact Steel, powder coated, Steel, Parkerised finish. .510" (1.3cm) wide. (1.3cm) finish. .510" Steel, Parkerised EXTENE RELEASE MAGAZI NDED N RUGER VOLQUARTSE ab asy To Find For Fast, No-Fumble Mag Drop Mag No-Fumble Fast, For Find To Easy No more fumbling trying to push the flush- fumbling trying to push No more Square contact pad is longer and wider than the and wider pad is longer contact Square EXTENE RELEASE NDED MAGAZI asier Mag Release Mag For An Easier Thumb Your Hooks SPECS: SPECS: receiver. of bottom from (8.8mm) .350" ward. The magazine falls free, right into your hand. The magazine falls free, ward. installation. for No gunsmithing required mounted, factory release; just hook your thumb just hook your thumb mounted, factory release; and push for on this curved, extended release #930-122-013AS #930-122-014AS SPECS: SPECS: remove your SKS magazine. Works with standard SKS magazines with standard your SKS magazine. Works remove only. #713-000-174AS required. Includes mounting pin. mounting Includes required. SPECS: SPECS: OAL. Pad – OAL. factory button, with more surface area, to ensure fast, to ensure surface area, with more factory button, on the first try. the magazine of no-fumbling release surface that with a vertical serrated Machined steel, even Easy to find, thumb contact for. non-slip ensures under stress. #687-000-052AS (2.2cm) wide, and is SPECS: SPECS: magazine in the gun more quickly by simply hitting the catch with the quickly by simply hitting the catch magazine in the gun more steel, gauge 16 heavy, from formed cut and laser Precision mag. fresh variety of finish. Due to the large with a durable, black powder coat two mounting and instructions for includes hardware guns, AK-style rivet. internally threaded rivet or a neat, options: a simple, deformable Saiga rifles rifles, plus commercial Designed to fit AK-47/-74/AKM gauge shotguns. Fitting required. bore/20 and .410 #100-005-697AS " - - - 8 order on the web / 5 ® ® " (2cm) $ 16.99 $ 44.99 $ 29.99 16 $ 24.99 / " (4.4cm) " (4.4cm) 4 13 ��� / 3 brownells.com 10/22 ® ab 77/22 ® ���������� - ab " (6.3cm) OAL, 1 OAL, " (6.3cm) ® " wide, 1 2 ​ ​4F14A97 2 / 1 /

1 RUGER " (2cm) long x RUGER M14/M1A ​3A24M03 16 / 13 10/22 ® ������������������������������������ ab RELEASE - RUGER ���������������������������������������������������� ​3A24A50 Grip " (2.8cm) wide thumb pad. " (2.8cm) Steel, Parkerized finish. Hardened to Rc 55. to Rc 55. finish. Hardened Steel, Parkerized 8 / 1 Titanium, gray, satin finish. satin Titanium, gray, Extra large, easy-to-reach magazine release magazine release easy-to-reach Extra large, " (4.6cm) OAL. Pad - OAL. " (4.6cm) Oversize Pad For Fast Magazine Changes Magazine Fast For Oversize Pad 16 / Lever, T3 Magazine Release Tactical Magazine Release, Tactical 6A40L52 77/22 Ti Mag Release, Extended MagazineCompetition Release, 13 Lightweight, Titanium release lever is precision lever is precision Lightweight, Titanium release POWER CUSTOM POWER NIUM EXTE NDED MAG TITA tion. Oversize pad with vertical, serrated surface pad with vertical, serrated tion. Oversize a alignment with your finger for perfect provides conditions. in all weather positive, no-slip release added steel for case hardened Machined from resis wear superior for Parkerized then durability protection. tance and corrosion SPECS: 1 lever replaces the original factory part for fast, the original factory part for lever replaces or competi positive mag changes during combat Oversized Lever For Fast Magazine Changes For Fast Oversized Lever SPECS: SPECS: machined to directly replace the factory part. Drops factory part. Drops the replace machined to directly fumble- for an easy-to-hit release right in to provide mag changes on Ruger 77/22 rifles. free SADLAK INDUSTRIES Quickens Magazine Changes Magazine Quickens E RELEASE N MAGAZI E RELEASE LEVER E RELEASE N T3 MAGAZI Injection-molded polymer, matte black. 2 matte Injection-molded polymer, 6061 Aluminum, anodized, matte black. matte anodized, 6061 Aluminum, NE RELEASE MAGAZI TACTICAL Lets You Drop The Mag You Lets Extended lever has a wide, N EXTECOMPETITIO NDED Drop in magazine release dramatically increases increases dramatically release in magazine Drop CUSTOM POWER Without Breaking Your Breaking Your Without WEAPONS SYSTEMS PRIMARY (4.1cm) long lever arm, 1 (4.1cm) low you to drop the mag without the mag without low you to drop with just easily changing your grip or shooting position. Activates the magazine without fumbling. so you can drop the trigger finger, the magazine when accidentally bumped. not to release Engineered lightweight yet durable poly shaped, molded from Ergonomically fit. Drop-in mer. SPECS: SPECS: ambidextrous finger pad to al ambidextrous #100-006-639AS wide. .7 oz. (19.8g) weight. Minor fitting required, includes mounting pins. includes mounting Minor fitting required, weight. (19.8g) oz. wide. .7 #100-004-037AS toured release extends along the trigger guard and is along the trigger guard extends release toured finger. with the index easily activated SPECS: tall. Fits .22 LR, .22 Mag, .22 Hornet. Does not fit synthetic stock models. fit synthetic Does not tall. Fits .22 LR, .22 Mag, .22 Hornet. the speed of magazine changes, especially during magazine changes, especially the speed of machined Over 3" long and competition shooting. billet, this con grade aluminum solid aircraft from #713-000-051AS #713-000-173AS " - - 8 / 7

® 26.99 ® $ 27.99 $ 29.99 $ 29.99 $ 24.99 " (3.8cm) " (3.8cm) " OAL, " OAL, 2 8 ® / / 1 7 ���� ���� ab ������ 10/22 ����������� ® ab 10/22 ������������ ® . Approximately (SS). Approximately asy Reach Easy ​3A24I03 ​1B24P45 - - ab ​1A24K36 AK-47 RUGER ​4E26Q34 ​1A24D12 " (12.7mm) wide, 1 " (12.7mm) RUGER

2 ives Added Leverage Added Gives / 1 - asy Reloads Easy NI-30 MINI-14/MI " (9.1mm) wide. " (9.1mm) 64 /

800-741-0015 23 For

MAG RELEASE MAG ab " long mag release installs without any " long mag release Steel, blued or stainless steel 4 / 3 1 Extended Length " (4.4cm) long, " (4.4cm) EXTE RELEASE NDED MAG NIUM EXTENDED TITA 4 oz. (14g) weight. (14g) oz. / 2 3 / xt. Mag Release, Blued, Ext. Mag Release, SS,Ext. Mag Release, Bullet-Button, AK-47 10/22 Ti Ext Mag Release, Speed Magazine Release, 1 modifications to your gun to prevent fumbling prevent to to your gun modifications Mini-14s for great Especially reloads. during and Mini-30s with high-capacity magazines. your Contours to your finger to let you release in blued steel alone. Available magazine by feel your gun. or stainless steel to match SPECS: SPECS: 1 xtends Below Receiver For Receiver Extends Below POWER CUSTOM POWER ASSAULT PLAET N ASSAULT EDM, titanium part drops-in to provide an easy-to- to provide titanium part drops-in EDM, Of The Finger The Of hit release for fumble-free magazine changes. Grooved changes. Grooved magazine fumble-free for release hit positive engagement. surface for NE RELEASE SPEED MAGAZI N BULLET-BUTTO LOCK MAG

7075 T6 aluminum, hardcoat anodized, black. Includes mount anodized, 7075 T6 aluminum, hardcoat Titanium, gray, satin finish. Approx. finish. Approx. satin Titanium, gray, Aluminum, hardcoat anodized, black. Approximately 2 black. Approximately anodized, Aluminum, hardcoat Drop The Mag With A Flick Mag With A The Drop NENTS COMPO NORDIC SYSTEMS ACCURACY For Permanently-Attached Magazine Permanently-Attached For Easy to install lock clamps over the maga Easy to install Speed release eliminates awkward awkward eliminates release Speed

Makes Your Rifle Meet California Requirement California Requirement Meet Rifle Your Makes SPECS: SPECS: and clones, plus AKM, AK-74, and instructions. Fits AK-47, ing hardware x 39mm. 7.62 for Saiga rifles chambered commercial struction with a durable hardcoat anodized finish. Installs in minutes finish. Installs in anodized a durable hardcoat struction with fully compliant, to be to rifle. In order alteration with no permanent than 10 rounds. more magazine capacity can be no manently retains the magazine in the receiver the magazine in the receiver manently retains Regulations Code of with California to conform magazine removal, rapid Prevents §978.20(a). a for meet the requirement so your gun can con all-aluminum magazine. Rugged permanent, non-detachable zine release button of an AK-type rifle and per an AK-type button of zine release #100-001-315AS #100-001-314AS #100-005-886AS tall. Fits .22 LR and .22 Mag. Does not fit synthetic stock models. fit synthetic tall. Fits .22 LR and .22 Mag. Does not

(2.1cm) max. width. Orders/Tech: SPECS: SPECS: SPECS: SPECS: cessed, factory release button. Push the cessed, factory release lever down with your trigger finger large Lets you the magazine. to easily release while quickly changing out your 10/22’s your eye on the target keep no permanent with installation, no-gunsmithing Easy, magazine. to your rifle. modifications fumbling for the hard-to-operate, re the hard-to-operate, fumbling for #713-000-050AS #100-005-455AS magazines & parts rifle #100-005-354AS #100-008-521AS put 30rounds at yourfingertipsfor super-fast re clamp togetherthree factory10/22magazinesto three, factoryRuger10/22magazinesattached. Fitsbelts upto2 SPECS: loop for easymountingonbeltsupto2 mag andcouplerassemblyduringinsertion.Snap-closure belt easy openingof flap.Indexingslotensures proper positioning of pack. Oversized pulltabgivesasecure graspfor inserts to hold itsshapewhen inserting theTriMag walled sides,double-stitchedseams,andplastic by anAlangator TriMag coupler. Builtwithdouble- three factory 10/22 magazines clamped together TRIMA (3.8cm) wide.1oz. (69g)wt. SPECS: again. even acoin.Loosenthebolttorelease themagazinesfor singleuse them bytighteningthecrossbolt withaslot-headscrewdriver or prone shootingposition.SlidethemagsontoTriMag andsecure – extendslessthan1¾"belowstock-soit’seasiertouseinthe a lowerprofile thanhigh-cap“banana”magazines loads without fumbling for the next mag. Presents #100-005-705AS #100-000-308AS #100-000-310AS #100-000-309AS #100-003-425AS #100-003-424AS Finger loop acts as shock absorber to protect magazine from dam provides positivegrippingsurfaceunderslipperyorwetconditions. .308. 3. pending onmodel.Impervioustomostchemicalcompounds. Pakof SPECS: each otherinpouch. age whendropped from rifle.Silencesmagazinesstored nextto #100-003-421AS SPECS: tory magazinesormixandmatch. held togetherinacompactpackage. Willalsoaccept5-round fac zine, uniquedesignallowstwo10-round factorymagazinestobe (3.1cm) wide, Clamps Together Magazines Three Factory 5.56 NATO fits20-and30-round AR-15/M16. 7.62 NATO fitsAR-Style Low-profile, moldedpolymercouplerkits Never againfumblearound inyourpockets for anextramaga 9mm Subgun fitsColt SMG. Kit - TriMag plusthree 10-round BX1magazines. G™ POUCH - Nylonmag pouch holds Ballistic nylon, mil-spec webbing, black.HoldsoneTriMagBallistic nylon,mil-specwebbing, with Industrial thermoplastic,black,flat darkearthorolivedrabde High-strength moldedpolymercomposite, black.1 Polymer,matte black. Approximately 1¾" (4.5cm) 1½" long,

NGATORALA RUGER MAGPUL INDUSTRIES 3 / 8 " (8.9cm) high. For Fast Reloads 8K79D99 TriMag Kit2w/10-Rd Mags, TriMag 10/22Coupler, TriMag Pouch, 5.56 NATO Magpul,FDE, 5.56 NATO Magpul,Black, 9MM SubgunMagpul,Black, 7.62 Magpul,Black, 5.56 NATO Magpul,ODGreen, Dual-Clip Holder, TRIMAG™ magazine changes.Recessed,rough texture and controllability duringhighstress, tactical easy-to-grasp handlefor unsurpassed speed of arifleorsubgunmagazineprovides an ab Thermoplastic loopinstalledonthebase Fast, Fumble-Free MagChanges � E&L MFG. DUAL-CLIP HOLDER Couple Magazines Together For ​5D21L95 PAGE MAGPUL ab ® ​2A5A25 Faster Reloads 10/22 ​3K8M25 1 / 4 AR-15/M16 " wide.

​5D9H19 RUGER � 174 ​3K8K25 ​3K8K25 � -

® ​ � ab ​3K8P25 ® Magazines included Magazines included ​3K8F25 � � � ® in Kitonly 10/22 9 � / ab 16 " long,1 � 1 $ 24.99 / � $ 10.99 4 79.99 $ 9.45 " wide. $ 6.99 9.45 9.45 9.45 9.45 ®

1 / - 4 - - - "

#100-012-475AS #100-012-489AS #100-008-955AS #100-012-488AS #100-008-953AS #100-008-956AS #100-008-954AS #100-008-957AS #100-008-958AS are single-stack. magazines staggertherounds below;.300WinMag and .338Lapua chassis system. All calibers feed from the center; the .223 and .308 stock, and the Modular Driven Technologies TAC 21 long action as theRemingtonPoliceriflein.338Lapua,AICSlongaction only longactionsandbottommetalthat accept alongerbox, such magazines are slightlylongerthanthestandard magnumandfit and theextralong(3.775" and3.850") actions.The3.775" and3.850" feeding. Available for shortactions,standard longactions(3.715"), body andself-lubricating polymerfollower helpensure smooth Teflon-coated mag tical bottommetal. patible riflesandtac zine fitsAICS-com black. Polymerfollower, matte black. SPECS: #100-003-844AS one clampmaybeused. both couplersononepairof mags;for lessstrenuous operations, to magazines.Soldin2-Paks. Foranultra-secure installation, use with astandard slot-headscrewdriver; nopermanentalterations Sold in2paks. H&K 33/53/93, RugerMini-14, andSIG540/543/550/551/552/553/556. metal AR-15/M16style magazines,AK-47/AKM, Galil7.62x39 and5.54x39, SPECS: 700 Tactical Rifles TACTICAL RIFLE MAGAZINE COUPLER Fits Remington Magazines not Magazines not All-steel maga included Reinforced moldedpolymercomposite, black,steelbolts. FitsUSGI- Heat-treated steelbodyandbaseplate, Teflon coated matte ACCURATE-MAG DETACHABLE MAGAZINE securely clampstwotacticalriflemagazinesto bolts provide tensioningforce for secure, non-slip, tions, includingheat, cold,andimpact,whilesteel including AR-15/M16, AK-47, Galil,H&K93, Ruger a varietyof .223/5.56mm and7.62 x39weapons, der stress. Universaldesignworks withmagsfor in the gunfor exceptionally fastmagchangesun gether sothebackup magisrightnexttotheone Mini-14 polymer clampsresist therigorsof tacticalopera sling, foliage, orothergear. Installsinseconds and rounded edgesprevent snaggingonBDUs, rattle-free graspof themagbody. Smoothsurface ab Clamps A Spare Mag To The One 3.850"/5-Rd, .338 LapuaRem 700Magazine, 3.775"/5-Rd, .338 LapuaRem 700Magazine, 3.715"/5-Rd, .338 LapuaRem 700Magazine, 3.850"/5-Rd, .300 WinMagRem 700Magazine, 3.775"/5-Rd, .300 WinMagRem 700Magazine, 3.715"/5-Rd, .300 WinMagRem 700Magazine, 5E70F70 .308 Rem 700Magazine,10-Rd, 5E64G93 .308 Rem 700Magazine,5-Rd, 5E69Q99 .223 Rem 700Magazine,10-Rd, 2B12D34 Universal MagCoupler, 2-pak, - - - Lightweight, minimal-profile coupling system ® SATISFACTION GUARANTEED , and SIG 556. Durable, reinforced molded For Ultra-Fast Mag Changes � � � � MAKO ​5E75H54 ​5E75E54 ​5E82D82 ​5E82A82 ​5E89N99 ​5E89N99 REMINGTO 700 SINCE 1939 � � � � � �

​

​

​ ​ In The $ 69.99 $ 14.99 84.99 84.99 Gun 66.99 89.99 89.99 72.99 77.99 77.99 - - - ®

100-015-883AS 100-015-881AS 100-015-880AS #100-005-887AS #100-005-889AS #100-005-888AS short actionM5detachablemagazinetriggerguard for .308. capacity. FitsAccuracy International AICSstockandBadgerOrdnance SPECS: 91.4mm (3.600") OAL. OAL. ups. and tempered steelspringtoensure smoothfeeding withouthang- Double-stack configuration withself-lubricating, polymer follower #311-000-018AS #100-013-354AS #311-000-019AS #100-015-882AS #100-013-356AS #100-013-355AS enthusiast. feeding andfunction. Amust-have accessoryfor anyM1carbine Rd -2 SPECS: (10cm) long,1 Accuracy International riflesorbottommetals. spring for reliable feeding. Willnotworkwithother black finish.Polymerfollower andself-lubricating tional AX chassisonly. All-steelmagbody with matte AX CHASSISDETACHABLE MAGAZI NES The ONLY Magazines For Your AX-System Rifle Factory magsfitrifleswiththeAccuracyInterna .338 Lapua-CIP accepts cartridges loaded to 93.5mm (3.681") 7 Non-CIP acceptscartridgesloadedtonon-conforming / Steel, blued,matte finish.Polymerfollower. 5-round or10-round 8 Heat-hardenedbody andfollower, steel matteblack finish.10- " (7.3cm) long, 1 Items

ab R 7 / treated chrome-silicon wire spring ensures reliable follower are madeof steelfor strength, whiletheheat- magazine builttoWWIImilitaryspecs.Magbodyand ACCURACY INTER 8 emingto 700Detachable " wide,¾"thick. Straight-body, newproduction M1 Carbine M1 CARBINE MAGAZINES 4D149B99 ​4D99N99 4D99B99 .338 LapuaNon-CIPMagazine,5-Rd, .338 LapuaCIPMagazine,5-Rd, .300 Win.Mag.AICSMagazine,10-Rd, 4D109B99 .300 Win.Mag.AICSMagazine,5-Rd, .308 AICSMagazine,10-Rd, .308 AICSMagazine,5-Rd, 4D84H99 1C28I09 M1 Carbine10-Rd Magazine, M1 Carbine15-Rd Magazine, .308 AXMag,5-Rd, 1C28P09 4D110C99 .338 LapuaAXMag,5-Rd, 4D99Q99 .300 WinMagAXMag,5-Rd, .308 AXMag,10-Rd, A ccuracy Inter 7 / 8 " wide(4.8cm), ¾"(1.9cm) thick. 15-Rd -3 Gets That OldVeteran Back Into Shooting Condition AUTO-ORDNA CE � � � � � � � designed tofittheAccuracyInter steel detachablebox magazine is Badger Ordnance bottommetal. national ChassisSystem (AICS)and � � � Fast, High-quality, precision-made Easy Loading & Unloading Conversion Systems With Box Magazine NATIONAL Magazine ​4D89G99 ​4D109B99 national

​ ​4D81F99 �

​ ​ � ​

� - ​

� ​ ​

​ $ 30.00 $ 89.99 149.99 109.99 109.99 $ 81.99 110.99 84.99 30.00 99.99 99.99 99.99 Office/Tech: 15 / 16 - " #341-100-122AS same specifications astheoriginalfactorymaga including 4M, 34M, 65M, and 982MDL, also Mossberg 640 series. zines for reliable fitandfunction. FitsallSavage .22magnumrifles SPECS: #560-000-005AS #341-000-006AS #560-000-006AS polymer baseplate addsstabilityandstrength. black powdercoat provides corrosion resistance and lubricity. Black guns madebySavagefor Sears,Wards, Western Auto,etc. need tostrugglewithgettinganoldwornordam current-production Henry AR-7 Survival Rifles. No reliable functionin Charter Arms,ArmaLite, and SPECS: by ArmaLite,CharterArms,andHenryRepeating Arms. SPECS: gun. Have plentyof spares onhandfor backup andplinking. replacement justlike theonethat camewithyour aged magtoworkwhenyoucangetabrand-new #533-400-567AS — Advise# — Advise# #533-400-350AS #533-400-355AS #533-400-510AS #533-400-516AS #533-400-567AS Fit & FunctionOriginals Just Like The Factory Replacement magazinesthat are builttothe Original, bluedsteelmagazinefor proper fitand STOCK # JOHN MASECO., INC. Factory Original, Steel Replacement For Factory 8-ROUND MAGAZINE Steel, blued. Steel, blued.Plasticfollower, black.FitsAR-7riflesmanufactured Fits all.223caliberMini-14 rifles. .22 WMR MAGAZINE Charter Arms, ArmaLite & Henry AR-7 SURVIVAL RIFLE SAVAGE/MOSSBERG helps improve feeding. 10-round capacity; nickel or life. Formed,high-lubricity, black-polymer follower stable loading, reliable following, and a long service Rem./Sav. 10ShotMag.,5H19E12 Rem./Sav. 5&6ShotMag.,5H15M89 Savage .22WMR Mag., Black Mini-14 Magazine, Nickel Mini-14 Magazine, AR-7 Magazine, Win. 52/69/75Magazine, Mini-14 magazines with heavy-duty springs for Heavy-Gauge Body & Long-Life Spring Provide Durability & Reliable Feeding

and function. ny Stevens/Springfieldriflesand“HouseBrand” SPECS: Remington 511/513/521/Nylon 11 Remington 511/513/521/Nylon Sav. 35/34/65/85/416/982 Sav. 35/34/65/85/416/982 11 Remington 511/513/521/Nylon Winchester 52/69/75 Hard-To-Find Replacements Keep These 641-623-5401 All magazineslistedduplicate factoryfit Obsolete RimfireRifles Shooting Steel, blued.Sav. CLIP MAGAZINE MAGAZINES FITS ab ​1D22B01 .22 RIMFIRE RUGER ​1D25N39 magazinesmayfitma ​6E17K95 � ​5H15M89 � ab ​6E19K67

® MINI-14 - - � � � � � � $ 16.99 $ 26.99 $ 20.99 $ 23.99 $ 16.99 19.99 RDS 18.99 6 5 10 5 10 ®

ab - rifle magazines & parts - 29.99 29.99 24.99 24.99 28.99 34.99 24.99 $ 56.99 $ 49.99 $ 25.99 $ 46.99 $ 22.99 15-Rd 175 PRICE

��������� ��������� ��������� coated steel coated ����������� ���������� ����������� ����������� ® ������������� ��������������� 9A54D90 9A46D99 9A48H64 PAGE 10 4 5 15-Rd RDS FNH SPR ​9A24L99 ​9A25K99 ​9A24K99 ​3Z28E21 ​3Z33G77 ​3Z22K97 ​3Z28H34 ​3Z21L95 ​3Z28A98 NES MAGAZI FNH Tactical Bolt Gun Bolt Tactical FNH Stainless steel, detachable steel, Stainless NES MAGAZI Factory Magazines For Your FactoryYour Magazines For box magazines offer rugged magazines offer box construction and long service - FITS 5-Rd SPR, PBR, SPR/TSR SPR, SPR A5M SPR, SPR A5M 10-rnd - NES MAGAZI PS90/P90

.308 .308 .308 50-Rd PS90/P90 Mag., 50-Rd PS90/P90 Mag., 30-Rd PS90/P90 Mag., 10-Rd 5-Rd Steel Magazine, 5-Rd Steel Magazine, 10-Rd Steel Magazine, 15-Rd Steel Magazine, 20-Rd SS Magazine, 20-Rd Steel Magazine, 25-Rd CALIBER NES NELLS MAGAZI BROW 4-Rnd ab YOUR 100% SATISFACTION IS GUARANTEED! IS SATISFACTION 100% YOUR Steel body and follower, mil-spec Parkerized finish or stainless mil-spec Parkerized Steel body and follower, Stainless steel, matte black finish in 5-round & 10-round. Stainless & 10-round. black finish in 5-round Stainless steel, matte Molded polymer, translucent, smoke. Approximately 10¾" (27.3cm) 10¾" (27.3cm) Approximately smoke. translucent, Molded polymer, H USA FN O JAMS • NO MISFEEDS • NO HANGUPS NO JAMS STOCK # STOCK Innovative, top-loading 5.7 x 5.7 top-loading Innovative, All-steel magazines For Your PS90 or P90 Rifle P90 PS90 or Your For Competition & Tactical Ops Tactical Competition & Standard & High-Capacity For Standard & nsures The Highest Reliability Highest Reliability The Ensures M14/M1A CHECK-MATE ed polymer to hold up to hard use and are drop-in ready for PS90 PS90 for ready drop-in and are use hold up to hard ed polymer to and smoke-colored indicators count round or P90 rifles. Molded-in rounds. remaining of allows easy visual confirmation polymer body capacity. in 10-, 30-, 50-or round Available SPECS: weight. (147g) oz. post, 5.2 feed high at 1½" (3.8cm) long, 2" (5cm) wide, 28mm factory magazines from magazines from 28mm factory durable, mold made from FNH are #119-000-077AS #119-000-078AS #119-000-079AS tion. Low-friction polymer follower with cartridge guide enhances with cartridge follower Low-friction polymer tion. and 5-round .308 rifles in 4-round, for Available feeding. reliable versions. 10-round SPECS: and base plate. Polymer follower finish in 4-round. life in your FNH SPR. Factory magazines ensure proper fit and func proper magazines ensure in your FNH SPR. Factory life #119-000-021AS #119-000-020AS #119-000-019AS eration during competition eration and tactical ops. Features a welded magazine body, reliable ensure to help follower wound spring and steel precision easy cleaning. for floorplate plus includes a removable feeding, finish Parkerized in carbon steel with mil-spec Models available stainless steel. or weather-resistant corrosion rust and prevents that Polished stainless steel magazine includes a Teflon SPECS: rifles. Fits M14/M1A steel follower. Teflon-coated steel body, follower. are built tough to provide built tough to provide are op dependable, reliable #100-004-092AS #100-004-089AS #100-004-090AS #100-004-091AS #100-004-093AS #100-004-088AS - ab

27.99 12.30 20.00 20.00 $ 47.99 $ 47.99 $ 47.99 $ 47.99 $ 13.25 $ 29.99 124.99 ����� ® ​ PRICE

��������� ​ ​

Half Pint Plinkster ������������� ������������� 5A45E02 5A45K02 5A45D02 5A45H02 ​1C20A00 G, Each, G, 10-Pak, ​1C29M99 G, Each, - 3 Rds 3 Rds 4 Rds 4 Rds III olt A-B ​1C27A99 ​1C20E00 Half Pint Plinkster ITYCAPAC - -

�������������������������������������������������� �������������������������������������������������� AK/AKM PMAG ® ������������������������������������������������������ AK-47 MAGPUL asiest Way To Ensure To Way Easiest ning Brow Dependability For Your Kalashnikov Your For G Dependability DESCRIPTION es n Magazi Factory MOE 3K12P78 3K124N99 3K00QQB 30-Rd AK-47/AKM PMA AK-47/AKM 30-Rd PMA AK-47/AKM 30-Rd PMA AK-47/AKM 10-Rd 715T Magazine, 25-Rd, 25-Rd, 702 Plinkster, 10-Rd, 702 Plinkster, 10-Rd, Half Pint Plinkster, PMA Tough polymer magazine functions perfectly perfectly polymer magazine functions Tough A-Bolt III, .270 Win III, A-Bolt Rem Mag 7mm III, A-Bolt Spfld .30-06 III, A-Bolt Win Mag .300 III, A-Bolt MOSSBERG hanced reliability. Ribbed gripping surfaces and front and front Ribbed gripping surfaces hanced reliability. aid magazine handling, and flared texture and rear for helps with disassembly and assembly floorplate cleaning and maintenance, yet is slim enough to fit in your AK-47/AKM or clone chambered in 7.62x39. in 7.62x39. or clone chambered in your AK-47/AKM polymer and crush-resistant impact Mag body of smooth construction, with constant-curve shape for en for anti-tilt follower and self-lubricating feeding, Size dentical To Mags Mags To Identical Spares That Came With Your Rifle With Your Came That Polymer, black. 30-rd capacity. black. 30-rd Polymer, Reliable Feeding For Your .22 Rifle .22 Feeding For Your Reliable NES MAGAZI FIRE RIM 25-round magazine has a steel STOCK # STOCK Replacement detachable box maga box detachable Replacement Original factory magazines en FactoryMagazines - #100-015-749AS #100-014-188AS 100-018-408AS #150-000-038AS #150-000-040AS #150-000-039AS #150-000-041AS zines exactly like the ones that came with came with that the ones like zines exactly these protrude the originals, your rifle. Like can you so stock the below enough just touch - no need to take is inserted into the rifle by check if a mag detachable box, Rugged steel-reinforced the target. your eyes off Fits the follower. polymer and self-lubricating plate, polymer base models. A-Bolt previous III (AB3) only; will not fit any A-Bolt ing it look like a full-sized AR-15/M16 AR-15/M16 a full-sized it look like ing fast magazine. Includes loader cap for and easy magazine loading. 10-round baseplate magazine has a steel body, helps feed and spring. Nylon follower for Models available smoothly. rounds rifles. and 801 Half Pint Plinkster 702 Plinkster 715T, Mossberg blued. black. Steel body, magazine - Molded polymer, 25-Round SPECS: magazine – Steel, blued. Nylon follower. 10-Round Nylon follower. sure reliable feeding in your Mossberg Mossberg your in feeding reliable sure .22 LR bolt action or semi-automatic rifle. body with a polymer extension, mak #631-000-342AS #631-000-343AS #631-000-341AS #631-000-340AS most mag pouches. Paint pen dot matrix panels on side of mag panels on side of most mag pouches. Paint pen dot matrix each mag. Counts as marking of body enable easy identification requirements. 922(r) Sec. USC 18 per parts compliance (3) three SPECS: SPECS: ------order on the web 59.99 59.99 18.99 29.99 24.99 24.99 $ 59.99 $ 39.99 $ 22.99 $ 23.99 � brownells.com ���� ������� ��������� ���������� ���������� - ������������ ​ ��������������

​9A59L99 ��

® ab ���������������������� ​7K20Q98 ​9A59A99 ​9A59Q99 NES MAGAZI ​4G18F09 ​4G22E78 NES MAGAZI ​4G23F11 ​4G23K11 10/22 ® ​7K27J62 AL Loader ����������������������������������������������������� RUGER NE MAGAZI Steel, Parkerized, matte black. Fits metric-pattern black. Fits metric-pattern matte Steel, Parkerized, NE MAGAZI 25-RD Steel body and spring, blued. Molded polymer fol 9A37P56 .308 FNAR Magazine, 5-Rd .308 FNAR Mag., 10-Rd .308 FNAR Mag., 20-Rd 10-Rd FNH FS2000 Magazine, 10-Rd SS Lip Magazine, Smoke, Hot Lips Loader, Magazine, 30-Rd, FAL Magazine, 20-Rd, FAL Magazine, 10-Rd, FAL Magazine, 5-Rd, FAL ® Top-quality, new-manufacture all-steel maga all-steel new-manufacture Top-quality, FactoryReplacement Steel Blued Original Factory-original magazine provides reliable opera reliable magazine provides Factory-original FNH fnAR™ .308 D.S. ARMS D.S. fn F zines keep your metric-pattern FN FAL running by of by running FAL FN metric-pattern your keep zines remaining few option to the you an affordable fering spring, Body, magazines on the market. surplus FAL stamped from all made are and floorplate follower Removable floor life. a long service steel to ensure old trying to keep beats aids in cleaning. Sure plate “seen better days” mags working! SPECS: Also fits Rock 7.62x51mm. for rifles chambered FN FAL River Arms LAR-8. tion in the field or at the range. Durable steel construc the range. Durable steel tion in the field or at func remains magazine and ensures wear resists tion delivers use. Molded polymer follower tional under hard the FNH FNAR .308 in for Available feeds. smooth round capacity. 5-, 10-, and 20-round SPECS: Brand-New, Metric-Pattern, All-Steel Construction All-Steel Metric-Pattern, Brand-New, ab

Popular Ruger .22 Rimfire Rifles Rimfire .22 Ruger Popular Reliable, High Capacity Magazines For Magazines For Capacity High Reliable, FNH FS2000 Factory Magazine For Your FNH FS2000 FNH FactoryYour Magazine For CREEK BUTLER FNH factory magazine ensures proper fit and fit proper ensures magazine factory FNH Extra-tough, polymer-body magazine is self- magazine is polymer-body Extra-tough, 20-Rd HOT LIPS HOT lower and base plate. Available in 5-, 10-, and 20-round capacity. in 5-, 10-, and 20-round Available lower and base plate. function in your FS2000. Features steel magazine Features function in your FS2000. with helps body with extended polymer base that mag well. Feeding enhanced FS2000 from removal matches black finish Matte follower. low friction by capacity. 10 round FS2000. overall appearance of #119-000-050AS #119-000-049AS #119-000-051AS #119-000-080AS #120-000-009AS #120-000-060AS inforced with stainless steel feed lips for optimum lips for feed with stainless steel inforced Constant force and long service life. performance loading. and smooth feeding uniform spring provides it easy interlocking notches make alternating, Two mags together or three two “click” to shooting and increased reloads fast for 10/22 and 77/22, and time. Fits Ruger Time-saving Lightning. AMT helps you quickly fill up any Hot Lips helps you quickly fill up any Just magazine and get back to shooting. the hopper and turn the dial. Instructions ammo into of dump a box included. lubricating and hold 25 rounds of .22 LR ammo. Re of 25 rounds hold and lubricating #274-000-022AS #274-000-027AS #100-009-551AS #274-000-028AS - - - - - ab 37.99 37.99 39.99 39.99 29.99 $ 59.99 $ 24.99 $ 29.99 16/16S ® ® ​ ​

​ ​ ������

​ ��������� ​

- - -

10/22 10/22 ® ® 16/16S

​1B57M40 ​1B20C71 17S RUGER RUGER -

800-741-0015 More & Reload Less Reload & More

���������������������������������������������������� ���������������������������������������������������� ���������������������������������������������������� ab ������������������������������������������������������ ������������������������������������������������������ ������������������������������������������������������ Dependable, super-capacity drum maga Dependable, super-capacity Super-Capacity Magazine Lets You Shoot Shoot You Lets Magazine Super-Capacity zine lets you shoot 50-round strings of .22 LR .22 LR strings of zine lets you shoot 50-round plinking plenty of ammunition in your 10/22 for to rifle needed; simply fun. No modifications facto the standard snaps into the mag well like polycar impact-resistant ry magazine. Tough, self-lubricating, are body and follower bonate spring to so they work with the constant-force consis for feeding deliver smooth, uniform 9A38J26 9A35J67 9A27H72 SCAR 17S Magazine, Black, 20-Rd SCAR 17S Magazine, FDE, 20-Rd SCAR 17S Magazine, Black, 10-Rd 9A35J67 SCAR 17S Magazine, FDE, 10-Rd 30-Rd SCAR16/16S Magazine, Black, 30-Rd SCAR 16/16S Magazine, FDE, 30-Rd 9A38A26 9A27L72 10/22 25-Rd Magazine, 10/22 25-Rd 50-Rd 10/22 Magazine, 50-Rd SCAR 16/16S/17S Feed Lips That Really Work Really That Feed Lips NE MAGAZI ND DRUM 50-ROU NE ND MAGAZI 25 ROU , matte finish. 16/16S for for finish. 16/16S Dark Earth (FDE), matte Steel, Black or Flat

Molded glass-filled polycarbonate plastic, Smoke body, red feed feed red body, plastic, Smoke Molded glass-filled polycarbonate FNH Long-Wearing Polycarbonate Body & Polycarbonate Long-Wearing Injection-molded polycarbonate, smoke. Fits Ruger 10/22, .22 LR only. smoke. Injection-molded polycarbonate, BLACKNE MACHI DOG BLACKNE DOG MACHI NES MAGAZI ACTORY Reliability & Performance & Reliability F Patterned after the popular, but now discontin popular, the after Patterned Brand-new, factory-manufac Brand-new,

Factory-OriginalFor Magazine #119-000-091AS #119-000-083AS #119-000-047AS #100-011-529AS lips. Fits Ruger 10/22, .22 rimfire. munition status at any time. at munition status SPECS: nals. Bodies are molded from tough 15% glass-filled glass-filled 15% tough from molded are Bodies nals. reinforced lips made from with feed polycarbonate of thousands for shooting to keep carbon plastic out. Translucent, or wearing without fatiguing rounds to visually check am body allows you smoke-colored ued Eaton design, this fully redesigned high-capacity design, this fully redesigned ued Eaton than the origi and functions better magazine feeds #119-000-048AS #119-000-082AS #100-004-432AS SPECS: SPECS: rifles. NATO 7.62mm rifles; 17S for NATO-chambered 5.56mm

tured magazine ensure proper fit proper magazine ensure tured and function in your FN SCAR. Steel use, while hard withstands body keeps low-friction polymer follower smoothly. stack feeding the round cleaning; 17S model has an for is easy to remove floorplate Steel and helps magazine insertion/extraction integral polymer base that surface. 16/16S hard on a cushions the impact if mag is dropped rifles. magazines also function in AR-15/M16 Orders/Tech: SPECS: SPECS: ings securely hold the body together to ensure exceptional strength strength exceptional to ensure hold the body together ings securely disassembly and cleaning. for easily removed yet are and rigidity, tent operation. Smoke-tinted translucent body enables easy visual Smoke-tinted tent operation. into brass bush anchored hex screws Steel ammo status. of checks #100-005-585AS magazines & parts rifle #100-016-594AS #100-018-819AS #100-018-822AS #100-018-821AS #100-018-820AS AKM 7.62x39-chambered riflesandAK-74 5.45x39 rifles. parts for compliancewith18U.S.C. Sec.922(r).Modelsfor AK-47/ for use with standard AK mag pouches. Counts as 3 U.S.-sourced #100-016-599AS #100-009-039AS #100-017-581AS rifles chambered for .308Win tactical Remington700. Itfits durability, andreliability toyour Magpul's GENM3™strength, Blackout, orshortactionmagnums. cartridges suchas.220Swift,with small-base .223Remington,.300 AAC .243 Winchester, withanoveralllengthof upto2.86". Not compatible NATO, 7mm-08Remington,6.5mm Creedmoor, .260Remington,and tridges built ona.470" casehead,including.308 Winchesters,7.62x51mm SPECS: bat use,where huntingregulation complianceisnotrequired. to increase thecapacityto6rounds for field,competition,orcom in handling.5-roundmodel'sfollower canbemodifiedbytheuser ing, andaneasy-to-remove floorplate that's slightlyflared for ease paint pen dot matrix on bottomof body for easyidentification mark bricating follower andstainlesssteelspringfor enhancedreliability, 700 stock.Plus,yougetallthePMAG features youexpect:self-lu metal, including Magpul's Bolt Action Magazine Well for their Hunter AICS (AccuracyInternational ChassisSystems) pattern bottom chester-based cartridges,with SPECS: PMA The PMAG 7.62 AC brings Your Tactical Bolt Rifle G Quality & Reliability For Black polymer. FitsHKG36.223/5.56mm. Reinforced, injection-moldedhard polymer, black.Accepts car

follower coupledwithconstantcurveinternalge Heckler &Koch G36combinesa4-way, anti-tilt and maintenance. glance. Magazineiseasilydisassembledfor cleaning dows oneachsideletyouseeremaining rounds at a ometry toensure smoothandreliable feeding. Win Tough, Reliable Polymer Magazine For The Flared floorplate iseasytograb,yetslimenough matrix panelsmake iteasytoIDeachof yourmags. movement of theround stack.Handypaintpendot pul's constant-curveinternalgeometryfor smooth and front/rear lugsfor superbdurability, plusMag similar variants.Bodyhasasteel-reinforced spine AK-pattern rifles, includingtheAKS, SIG556R,and high-reliability mag isdesignedspecificallyfor M3's for AR-pattern rifles. Ruggedyetlightweight, nology uptothesamestate-of-the-art asGEN AK/AKM GENM3™PMAG Magpul 3K12F76 30-RD AK-74 GENM3PMA 3K12C76 30-RD AK-74 GENM3PMA Sand, 20-RD AK/AKMGENM3PMA Black, 20-RD AK/AKMGENM3PMA Black, 30-RD AK/AKMGENM3PMA PMA HK G36Magazine, PMA Rugged, 30-round polymermagazinefor the For Your AK Plus Polymer magbringsKalashnikov PMAG tech PMAG GEN 3 Ergonomics& Reliability G 7.62 AC, 5-Rd, G 7.62 AC, 10-Rd, HK G36MAGAZINE ​3K11N84 ​3K11H84 ​3K24D63 � � � MAGPUL HKG36 Maximum Durability - R ® emingto 700 7.62 AC ab � PAGE � � Internal Reinforcing For ​3K25G56 ​3K32L59

​3K37D26 176 G, Sand G, Black TM � , G, , G, G, � �

​ ab ​ $ 25.60 $ 33.20 $ 26.55 ® 12.30 12.30 13.25 13.25 37.95 G36 ab ------#817-501-900AS SPECS: allows flushwithreceiver bottom. floorplate makes disassemblyeasyfor cleaning.5round capacity steel follower ensures smooth, consistentfeeding. Removable, lapse underthetoughestconditions.Precision wound springwith #687-000-023AS #560-000-009AS extreme abuse andstillprovide trouble-free, reliable op tough a nylon follower and last-shot hold open fea Marlin-Glenfield self-loaders.This7-round maghasa 795, 880, 880SS, 995, 995SS, and7000. .22LRonly. ture. FitsModels25N, 60, 70, 70HC, 70L,70P, 70PSS, SPECS: repeatable feeding. Removablefloorplate allowseasycleaning. steel follower andprecision wound spring for smooth, eration. High-strength, weldedmagazinebodyincludes #550-000-693AS #550-000-695AS #560-000-008AS Rugged, All Steel Body For Competition & Tactical Use MARLIN MARLIN High-strength, steel magazine body won’t crack, chip or col High capacity, steelmagazineisbuilttowithstand Shiny nickel-plated, steelmagazinefitspost-1996 SEMI-AUTO MAGAZINE Steel, Parkerized body;steelfollower. 5-round capacity. Steel bodyandfollower, black, matte finish.20-round capacity. 20-ROUND MAGAZINE Reliable Function & Feeding PRO MAG models: 80, 780, 20, and25. following discontinuedMarlin-Glenfield boltaction aids inreliable feeding. Matte blackfinish.Fitsthe as yourgun’soriginal.Long-wearingnylonfollower -GLENFIELD RIMFIRE the range.Theseare thesamehigh-qualitymaga plenty of spare mags,soyoucanload'emupandhit tension spring. with matte bluedfinish,polymerfollower, high- zines that camewithyourrifle-sturdy steelbody Replacement ForHardTo Find Original Mags JOHN MASE Rigid, SteelMagazineForHuntingOrTactical Use -GLENFIELD BOLT ACTIO N Steel bodymagazinehasthesamefitandfunction Marlin XT-22 M14/M1A 5-Rd Mag, M14/M1A 20-Round Mag, Magazine, Marlin-Glenfield Semi-Auto 7-Rd XT-22 Mag,.22WMR/4-Rd, XT-22 Mag,.22LR/7-Rd, Magazine, Marlin-Glenfield 7-Rd Bolt Action The XT-22 is somuchfuntoshoot,you'llwant Top-Quality Replacements Factory RIMFIRE MAGAZINE M14/M1A MAGAZI NE JOHN MASE SATISFACTION GUARANTEED SPRINGFIELD ARMORY M14/M1A ​6E17E86 ​6E19E78 ab ab � SINCE 1939 � ​7A33J02 Magazines ab ​5E16H37 ​7H18A35 ​5E10P38 � � - ab - � � � $ 34.99 $ 20.99 $ 20.49 $ 18.99 $ 19.99 14.99 ab - - operations. Bothfeature aTIG-weld operation duringcompetitionortactical over-built tohelpensure dependable SPECS: steel floorplate for easycleaning. for consistentfeeding, plusaremovable wound spring,andpolymerfollower ed, heat-treated steelbody, precision #687-000-056AS #687-000-030AS #687-000-050AS #687-000-051AS hard use.Steel floorplate removes for cleaning;steelfollower. deep, glossbluedfinish,sothey’lllookgoodandlastalifetime of 10-rounds andare constructedof heat-treated sheetsteel,witha way togetitbackintoservice.Theseheavy-duty magsdeliverafull old riflesidelinedbyfeeding problems, anewmagcanbefast,easy Precision-wound springandpolymerfollower helpen piece polymerbodyfor addedfirepower andreliability. LR magazinefeatures alightweight,yetruggedone- Fits GSG-5, GSG-522Carbine,andGSG-5Ppistol chambered in.22LR. follower, black.Heat-treated, chrome-silicon wire spring. SPECS: handy viewingslotfor checkingyourround count. ing thefollower withyourthumbfor easyloading,plus sure smoothfeeding. Includesassistbuttonfor retract SPECS: #687-000-048AS High-Capacity 7.62 x 39 Mags For High-quality steelmagazinesare High-capacity replacement for factoryGSG-5 .22 30-ROUND POLYMER MAGAZINE Competition & Tactical Ops PRO MAG Replacement .22LRMagazine Built To 30-ROUND STEELMAGAZINES Steel body, blued;polymerfollower. Steel, blued. Fits British No. 4 Mk I rifle chamberedSteel, blued.FitsBritishNo.4MkIrifle in.303 British. 22-ROUND MAGAZINE Reinforced, injection-moldedpolymerbodyand High-Performance Standards base plate allowsfulldisassemblyandcleaning. grasp duringquickmagchanges.Removablepolymer rifle. Waffle pattern ridgesonsidesmake mageasyto consistent feeding in your AK-74 pattern 5.45 x 39mm self-lubricating polymer follower provides reliable, rifles, includingWASR-2, Tantal, andSLR-105. black. Steelspring.FitsAK-74 pattern 5.45 x39mmcaliber SPECS: PRO MAG Lightweight, reinforced polymermagazine with its original.303Britishchambering.Ifyouhave an feeds correctly onaWWII-era Enfield No.4stillin aged, orjustplain“tired” magazinethat nolonger Enfield No.4MkIMag., 22-Rd GS-5Magazine, 30-Rd MiniThirtyMag, 30-Rd AK-47 Mag, 30-Rd AK-74 Magazine, PRO MAG High-quality replacement for aworn,dam PRO MAG High-Quality BluedSteel Replacement AK-47/RUGER Rugged Construction,Lightweight Reinforced injection-moldedpolymer, matte 10-ROUND MAGAZINE GSG-5 High-Capacity, ab ENFIELD No AK-74 - ​7H28M14 ® MINITHIRTY ​7H28N11 7H21F86 ​7H10L54 ​7H19A14

� ab - - . 4MkI � � � � $ 29.99 $ 20.99 $ 23.99 $ 11.99 Mini-30 ® 29.99 10-Rd Office/Tech: ab ab - thetic bodies,allothers are steel.a SPECS: #687-000-019AS #687-000-032AS #687-000-068AS #687-000-067AS #687-000-020AS chambered in7.62 x39mmor.223/5.56mm NATO. pacities. 30-round capacities.6.8mmin 10-and20-round SPCavailable ca Mini-14 -Steel,polishedbluebody. .223/5.56mm availablein20-and SPECS: tion for AKschambered in.223/5.56mm NATO. sure grip.Available instandard 7.62 x39mmor“AK-223” configura less weight,withmolded-inwaffle-pattern exteriortexturingfor a 30-round magazinefeatures arugged,seamless,polymerbodyfor (20- and30-round) and6.8mm SPC(10-and20-round). AK-47 ed for uniformity andlastingstrength. Available in.223/5.56mm #780-001-351AS #780-001-352AS #780-001-353AS 780-001-367AS #780-000-329AS #780-000-782AS #780-002-406AS #780-002-409AS #780-002-410AS #780-002-762AS #780-002-514AS #780-000-107AS #780-002-122AS #780-001-369AS #780-001-360AS #780-001-311AS STOCK # JX and BX series have syn JX andBXserieshave HIGH-CAPACITY MAGAZINES HIGH-CAPACITY Polycarbonate follower, chrome silicon steelspring.Ruger AK-47 -Polymer, matte blackbody. 30-round. Modelsfor rifles Factory Original Factory Item MAGAZINES 90374 90354 90355 90440 J22705 MAG-9644 JHX-1 JMX-1 JX-1 MAG-762 MAG-5 90041 BX-1 BX-15 BX-25 X2 BX-25 RUGER RIFLE MODEL AK-47 5.56mm Mag.,30Rd, 20-Rd, Ruger Mini-14 6.8mm SPCMag., 10-Rd, Ruger Mini-14 6.8mm SPCMag., 7H22L65 Ruger Mini-14 .223/5.56 Mag.,30-Rd, 7H20K31 Ruger Mini-14 .223/5.56 Mag.,20-Rd,

641-623-5401 ​7H19P14 PRO MAG ​7H21K08 ® Scout Rifle.308 Scout Rifle.308 Scout Rifle.308 American .223 77/44 96 /44, .44 Mag. 77 /22 10/22 77 /17 Mini-Thirty Mini-14 10 /22 10/22, .22,Blk, 10/22 10/22 SR-22 American, .22LR Charger™ 10/22 Rifle, 77/22 SR-22 Charger™ Hornet Mach 2 defensive maneuversandtacticalcom reliable feeding youcancountonfor treated, chrome siliconspringensures follower with precision-wound, heat- ed, carbonsteelbodythat’s TIGweld easy disassemblyfor cleaning.Ruger petitions. Removablebaseplate allows Mini-14 � �

Reliable, Easy Loading, U.S.-Made Mags For Popular Tactical Rifles Self-lubricating, polycarbonate b ® ® ®, ® ® ® ® ® , .22Mag. , 77/22 , .44 Mag. ® FITS ® & SR-22 77/22 Rifle & Rifle, 22 - , .17 ® , .22 , .22, , .223 ® � magazineshave aheat-treat � ® ® , 7.62 , 22 ® ® , , ®

3 5 10 5 4 RD 10 RD 50 15 25 RD 5 RD 5 RD 6 RD 10 RD 9 RD 4 RD 5 RD CAP ab ​7H11N21 8G46C07 8G31Q85 8G17G90 8G23K08 8G31G85 8G17D90 8G31H54 8G26C51 8G19Q71 8G27A87 8G31B54 8G31A85 8G24F74 8G19P71 8G31I85 8G24I12

PRICE

​ ​ $ 21.99 $ 24.99 $ 24.99 $ 20.99 $ 20.99 $ 34.99 $ 29.99 $ 32.99 $ 32.99 $ 33.99 $ 33.99 $ 33.99 $ 19.99 $ 19.99 $ 47.99 $ 27.99 $ 27.99 24.99 20.99 22.99 11.99 - - - - ® -

RIFLE magazines & parts " 8 / 7 ab 23.99 38.00 $ 18.99 $ 16.99 $ 38.00 ab ​

​ 177

�������

���������

" (8.7cm) high, 1" " (8.7cm) �������������� 16 / 7 - PAGE ​5A17G83

​5A22A16 ​5A16D18 Detachable For " (9cm) wide, 3 2 / 1 Fast Reloads & Extra Capacity Reloads Fast ���������������������������������������������������� ���������������������������������������������������� ab Rugged, molded-polymer magazine POLYMER MAGAZINES POLYMER ends the hassle of loading your SKS from loading your SKS from ends the hassle of old-fashioned stripper clips and gives you capacity and extra speed, convenience, the magazine. Not a modern detachable box of mag but an all-new design a modified AK-47 function in reliable specifically developed for your rifle’s use it, simply remove To the SKS.

REMINGTON 740/742/750/7400 REMINGTON 20-Rd Detachable Mag, 20-Rd Detachable Mag, 10-Rd .30-06 Mag., 740/742/750/7400 Rem 6H33L62 .308 Mag., 740/742/750/7400 Rem 6H33E62 30-Rd Mini-14 Mag., Mini-14 30-Rd RUGER® MINI-14® RUGER® " (2.7cm) thick. Will not fit rifles converted to accept to accept fit rifles converted thick. Will not " (2.7cm) 16 / 1 10-ROUND MAGAZINES 10-ROUND All-Steel Body Gives Rigidity Body Gives All-Steel Molded polymer, black. Approximately 7" (17.8cm) high, 2 7" (17.8cm) black. Approximately Molded polymer, Injection-molded polymer, black. Fits Ruger Mini-14. Holds 30 Fits Ruger Mini-14. black. Injection-molded polymer, Steel, blued. Approximately 3 Steel, blued. Approximately TAPCO 30-ROUND MAGAZINE 30-ROUND TAPCO SKS TAPCO More Rounds Than FactoryThan Rounds More Magazine Grasping Ridges For Fast Mag Changes Fast For Ridges Grasping Durable high-capacity magazine provides a Durable high-capacity magazine provides Based on Tapco’s popular AR-15 magazine, this magazine, popular AR-15 Based on Tapco’s TRIPLE-K Rugged One-Piece Body With Aggressive Aggressive With Body One-Piece Rugged AK-47 magazines. (7.3cm) wide, 1 (7.3cm) internal magazine and hinged floorplate; they can be reinstalled to can be reinstalled they internal magazine and hinged floorplate; Some rifles, including those with to original configuration. return the of slight enlargement the original wood stock, will also require reinforced corrosion-proof, of One-piece body opening. magazine movement smooth, snag-free to ensure polymer is self-lubricating fully The ultra-stable, anti-tilt polymer follower the follower. of Horizontal hangups. feeding prevent to ammo stack the supports Counts as gripping surface. an excellent exterior ribbing provides Code Title 18 Section 922(r) compliance with U.S. parts for three requirements. part-source SPECS: SPECS: in .30-06 and .308. Available feeding. reliable lower ensure SPECS: long service life and holds ten rounds for fewer fewer for and holds ten rounds long service life 742, when shooting your Remington 740, reloads spring and nylon fol Folding, leaf or 7400. 750, (2.54cm) thick. Fits Remington 740, 742, 750 & 7400. 750 742, thick. Fits Remington 740, (2.54cm) #100-003-929AS #486-000-003AS #100-003-165AS #486-000-002AS SPECS: SPECS: .223 ammunition. of rounds lightweight magazine delivers 30 rounds to your to delivers 30 rounds lightweight magazine of in all types reliability with exceptional Mini-14 glass fiber- One-piece body of conditions. extreme composite has outstanding polymer reinforced dropping damage from to resist structural rigidity and side-impact concrete surfaces like on hard you an give floorplate ridges and flared Aggressive crushing forces. interior with Continuous-curve fast reloads. for grip extra-secure that non-tilt follower surfaces and a polymer, slick, mirror-finish uneven by caused jams of risk eliminate virtually grooves in runs chrome-silicon stack. Corrosion-resistant on the round pressure extended for a loaded mag is stored spring won’t lose power when with the spring, lock tab stay and floorplate periods. Captive follower cleaning simply easily for removes so they won’t get lost. Floorplate cartridge. an unfired the locking tab with the tip of by pressing #100-005-639AS " - - - - - 4 / 3 ® 11.99 11.99 11.99 11.99 12.99 12.99 14.99 14.99 $ 10.99 $ 49.99 " (12cm) 4 " (3.2cm) " (3.2cm) / 4 3 / ​ 1 ​

������ �������� �������� ���������� ���������� 10/22 ® ​

" (19cm) high, 2 2 ab " thick. 10 Rd – Ap 4 / 1 / 1 ​5A11B17 ​5A10G25 ​5A14K35 ​5A11F17 ​5A11C17 " " (7cm) wide, 1 - - 4 32 RUGER / / 3 3 " (7cm) wide, 1" (2.5cm) thick. " (7cm) wide, 1" (2.5cm) 4 " wide, 1 4 / 3 / 3 �������������������������������������� " thick. 5 Rd - Approx. 4 " thick. 5 Rd - Approx. 4 ������������������������������������������ / 1 MAGAZINES ���������������������������������������������������� ​5A11F06 ������������������������������������������������������ ����� ������������������������������������������������� ab " wide, 1 ​5A11F06 4 Approx. 7 - Approx. " thick. AK-74 AK-47/-74/GALIL TAPCO / 4 3 / " (19.1cm) high, 2 " (19.1cm) 1 Reliable, Easy Loading, Polymer Mags Polymer Loading, Easy Reliable, Rugged magazines manufactured using Rugged magazines manufactured 2 / 1 weight, one-piece reinforced polymer body is weight, one-piece reinforced smooth, to ensure and self-lubricating rustproof Anti-tilt, the follower. movement of snag free heat- duty, and heavy follower polycarbonate feeding. reliable ensure help spring steel treated a secure exterior ribbing promotes Horizontal easy disassem for grasp. Removable base plate (7.62 AK-47 for cleaning. Models available bly for the latest in polymer molding technology for for in polymer molding technology the latest type rifles. Light in Kalashnikov feeding reliable 5A10G40 30-Rd AK-47 Magazine, AK-47 30-Rd Magazine, Dark Earth, AK-47 30-Rd Magazine, AK-47 30-Rd Smooth-Side Black, Magazine, AK-47 30-Rd Smooth-Side Orange, Magazine, AK-47 20-Rd 10-Rd AK-47 Magazine, AK-47 10-Rd 5-Rd AK-47 Magazine, AK-47 5-Rd Magazine, AK-74 30-Rd 5A14B35 30-Rd Galil/Golani Magazine, 30-Rd Adjustable 10/22 Magazine, 25-Rd, Adjustable 10/22 Magazine, 1B46J81 " (3.2cm) thick. Fits AK-74 chambered in 5.45 x 39mm. in 5.45 chambered thick. Fits AK-74 " (3.2cm) 4 / 1 " (12.1cm) high, 2 Feeding In Any 10/22 Rifle 10/22 Any Feeding In " (6.3cm) wide, 1 " (6.3cm) Injection-molded polymer resin body, matte black; stainless matte body, Injection-molded polymer resin 4 2 Molded polymer, Black, Dark Earth, or O.D. Green. Available col Available Green. Black, Dark Earth, or O.D. Molded polymer, / / 3 1 ADJUSTABLE HIGH HIGH ADJUSTABLE INNOVATIONS TACTICAL Adjustable 25-round magazine provides magazine provides Adjustable 25-round CAPACITY MAGAZINE Precise, Positive Fit For Smooth, Reliable Reliable Smooth, For Fit Precise, Positive #100-003-962AS #100-003-963AS #100-010-796AS #100-004-529AS #100-010-795AS #100-005-779AS #100-006-651AS #100-005-439AS #100-005-441AS (7cm) wide, 1 prox. 4 prox. SPECS: SPECS: and detailed Includes Allen wrench capacity. lips. 25 steel round feed instructions. SPECS: x in 7.62 – Fits AK-47 and clones chambered ors vary by model. AK-47 high, 2 9" (22.8cm) 39mm. 30 Rd – Approx. able feeding every time you pull the trigger. trigger. every time you pull the able feeding adjustment allow precise Four cap screws ejector-to- and height, feed angle, feed of supplied the using engagement bolt stand the punishment of full-auto fire; disassembles quickly with the fire; full-auto stand the punishment of easy cleaning. for wrench sistent, and the body geometry is designed sistent, and the body geometry inside. rounds of movement smooth aid to so up,” “stack not does and set a take won’t spring Constant-force Four full capacity. mag nears the as even is easy, inserting rounds shots many how of track keep you help holes witness convenient with left. Glass-filled polymer composite mag body will easily are 30-round capacity. Fits Galil and Golani rifles chambered in .223/5.56mm in .223/5.56mm Fits Galil and Golani rifles chambered capacity. 30-round NATO. (.223/5.56mm x 39mm), and Galil/Golani (.223/5.56mm (5.45 x 39mm), AK-74 Code compliance with U.S. parts for rifles. Counts as three NATO) requirements. Title 18 Section 922(r) part-source thick. 20 Rd – Approx. 7" (17.8cm) high, 2 7" (17.8cm) thick. 20 Rd – Approx. a solid fit customized to your gun for reli to your gun for a solid fit customized Approx. 7 - Approx. Galil/Golani Allen wrench. Hardened, stainless steel stainless Hardened, Allen wrench. angle stays con the feed lips ensure feed high, 2 #100-003-036AS - order on the web 5.99 $ 1.99 35.99 34.99 34.99

24.99 42.99 ab $ 21.99 $ 32.99 $ 34.99 " (3.8cm) " (3.8cm) 2 / 1 brownells.com ����� ����� ������� ab ​ ​

���������� ��������������� �������������� �������������� ����������������� ® ​8G31F23 ​8G39L71 ​8G31G85

​1K1Q74 ​1K5B27 ​5H31Q64 SAVAGE 340 SAVAGE ​5H31F84 ​5H31B04 " (20.6cm) long, 1 " (20.6cm) 8 - / 1

MAGAZINE /MINI THIRTY /MINI Reliable Fit & Feeding Fit Reliable REMINGTON 597 REMINGTON ® WISNER ������������������������������������������������������� ������������������������������������������������������� ifle Shop REPLACEMENT BOX Made On The Original FactoryOriginal The On Made Tooling High-Capacity FactoryFor Magazine 30-ROUND MAGAZINE 30-ROUND 30-30 Win Magazine, Magazine, .222 Rem Magazine, .223 Rem 30-Rd Rem 597 Magazine, Black, 597 Rem 30-Rd 8F20J73 Magazine, Clear, 597 Rem 30-Rd 8F21I92 M1 Garand Clip, 8-Rd, M1 Garand Clip, 5-Rd, Mini-14 20-Rd Magazine, 20-Rd Mini-14 Magazine, 30-Rd Mini-14 Mag, 20-Rd Mini-Thirty Remington factory-original magazine ensures re ensures Remington factory-original magazine ank’s R MINI-14 liable feeding of 30 rounds in your Model 597 rimfire. in your Model 597 rimfire. 30 rounds of liable feeding body, polymer hard reinforced high-impact, a Features high-strength and a follower, polymer self-lubricating will handle thousands steel spring that chrome-silicon Available cycles without losing force. compression of ammo status. easy visual check of in Black or Clear for T ® Long-Lasting Performance Long-Lasting Genuine FactoryGenuine For Magazine ab " thick (1.9cm). Fits Remington Model 597, .22 LR. Fits Remington Model 597, " thick (1.9cm). Steel, blued. Heat treated. Fits Savage 340 only. Installation may Installation Fits Savage 340 only. treated. Steel, blued. Heat Polymer, black or clear. Approx. 8 Approx. black or clear. Polymer, Spring steel, Parkerized, matte black. matte Spring steel, Parkerized, fits .223 caliber Mini-14 Mini-14 fits .223 caliber finish. Mini-14 moly steel, blued, Chrome 4 Quality Replacements For Replacements Quality / The Hard-To-Find Originals Hard-To-Find The 3 M1 Garand Clips Keep shooting that Savage Model 340 with these factory-style Savage shooting that Keep Reproduction spring steel clip is a di spring steel clip is Reproduction Genuine Ruger, high quality magazines for optimal optimal magazines for high quality Genuine Ruger, RUGER 20- & 30-ROUND MAGAZINES 30-ROUND 20- & SPECS: SPECS: minor fitting. require magazines; made on the original factory tooling. Bodies and springs and durability for steel tempered long-wearing, from made are strength. #895-341-222AS #895-341-223AS #895-340-030AS SPECS: SPECS: wide, #768-000-012AS #768-000-011AS SPECS: SPECS: rect replacement for the original M1 Garand “en bloc” M1 Garand “en the original for replacement rect model capacity or a 5-round original 8-round in the clip. Available Durable with magazine capacity restrictions. hunting in areas for the original. like and looks corrosion finish resists Parkerized SPECS: SPECS: fits 7.62 x 39mm caliber Mini Thirty. x 39mm caliber Thirty fits 7.62 Ranch Rifle. Mini and Mini-14 performance and long-lasting reliability. Spot welded Spot welded and long-lasting reliability. performance steel and tempered nylon follower, self-lubricating all-steel body, and extra-long service life. feeding spring give reliable #780-002-516AS #901-000-004AS #780-001-263AS #901-000-005AS #780-002-515AS - - - - 29.99 $ 39.99 $ 42.99 $ 49.99 $ 46.99 $ 41.99 $ 29.99 $ 29.99 ®

��� PRICE �������� ���������� 8F39E16 8F38J53 8F45Q31 8F44H86 �������������� ​1D38H51 MINI-14 ® ​6H25K72 ​1D27Q97 FITS ​1D26B83 7600, 6, 76, 76, 6, 7600, 760 7600, 6, 6, 7600, 76 760, 7400, 4,74, 4,74, 7400, 750 740, 742, 74, 4, 7400, 750 740, 742, RUGER 800-741-0015

REMINGTON 522 REMINGTON MAGAZINE CLIP MAGAZINE Long-Wearing Durability Long-Wearing CALIBER ab Steel body, black, matte finish with polymer fol black, matte Steel body, 7mm-08, .308 7mm-08, .25-06, .270, .30- .270, .25-06, Whelen .35 06, 6mm, .243, .308 6mm, .243, 7mm .280, .270, .35 Exp. .30-06, Whelen 6mm, .243, Steel Body & Nylon Follower For Steel Body 10-ROUND MAGAZINE 10-ROUND TRIPLE K TRIPLE 10-ROUND MAGAZINE 10-ROUND Reliable, aftermarket 10-round magazine fea 10-round Reliable, aftermarket .308 Win. Magazine, 6mm Rem. Magazine, 6mm Rem. .223 Mini-14 Magazine, .223 Mini-14 10-Rd Rem 522 Magazine, 522 Rem 10-Rd Durable, All Steel Body For Reliable Feeding For Reliable Body Steel Durable, All Rolled-steel body, self-lubricating nylon follower, nylon follower, self-lubricating Rolled-steel body, tures a high strength steel body for long service for steel body a high strength tures helps en polymer follower Self-lubricating, life. allows pad thumb built-in feeding; consistent sure easy loading. Witness slot for spring compression quick verification provide count marks and round polymer floorplate count. Hard round remaining of cleaning. easily for removes SPECS: Fits Remington 522 .22 LR. lower and floorplate. FAC # 106835 19638 19642 19636 Back-Ups For Back-Ups and tempered steel spring give reliable feeding and feeding steel spring give reliable and tempered REMINGTON Remington Centerfire Rifles Centerfire Remington MAGAZINES Steel, matte black finish. Holds 3-rounds. Fits Remington 788. Fits Remington 788. black finish. Steel, 3-rounds. Holds matte

For Reliable Feeding Reliable For Steel, blued. REMINGTON 788 REMINGTON Precision-made, high-quality Precision-made, The best “carrying cases” for extra ammo; extra for cases” best “carrying The

STOCK # STOCK Quality Aftermarket Magazines Aftermarket Quality #767-106-835AS #768-007-600AS #768-007-400AS #767-106-842AS SPECS: SPECS: and 7mm-08. .308, .243, Win. accepts .308 steel magazines are built to original factory specifications to help factory specifications built to original are steel magazines the range. Spring- the field or at in operation dependable ensure fast loading and for free the magazine drops latch loaded finger smooth steel spring provide and tempered follower unloading. Steel without hang-ups. feeding #341-000-005AS #341-000-004AS SPECS: SPECS:

they fit right into the gun. No more magazine they fit right into the gun. No more genuine factory construction. Steel filling in the field. High quality, housing and follower. Orders/Tech: sorbing, nylon floorplate and black epoxy coating that resists scuffs, resists that coating and black epoxy sorbing, nylon floorplate abrasion, and corrosion. extra-long service life. Fixed-bottom magazine with shock-ab Fixed-bottom extra-long service life. #486-199-014AS #341-000-001AS magazines & parts RIFLE #474-000-001AS — Advise# #804-100-703AS #804-100-702AS #804-100-701AS #895-100-088AS #895-100-100AS in seconds,safe for allmetalandplasticmags. and feeding. Protects againstcorrosion, repels dirt.Dries and long-wearingtempered spring. tooling. Features solid,heavy-wall, steelbodies,diecastfollower with thesereplacement magazinesmadeontheoriginal,factory target andvarmintshooting.Nogunsmithing; fits ontopof thefac SPECS: .695" (1.8cm) wide,.8 oz. (22g)wt.Othermodelswillvaryslightly. SPECS: tory follower. SPECS: #981-000-009AS #981-000-012AS Features durable, lightweight aluminum con replacement for theABSplasticfactorypart. .375, .356, .307, .444). 1894 (.41, .44, .45LC, .450). Marlin1894(.44) alsofitsMarlin336(.30-30, SPECS: struction andaneasy-to-spotred color. ALUMINUM MAGAZINE FOLLOWER KRUNCH PRODUCTS Durable AluminumReplacement For Aerosol, drylubricant,improves magazinefunction Machined aluminum makes this a perfect STOCK # Factory Lever Action Followers Factory Aerosol, 6oz. (170g)wt. Steel, blue.4-round capacity, .308 and.243 Win. Machined aluminum.Remington700SAis2.1"(5.5cm) long x Aluminum, anodized, red. Modelsfor Marlin1895(.45-70) and

Keeps Magazines Clean& Working WISNER BENCHREST FOLLOWER ab WILD WESTGUNS Benchrest Follower, 4K9H36 Rem. 700LA Rem. 700SA Rem. 700MA Mag Slick, 5H53B03 .308 Winchester100Magazine, 5H53H03 .308 Winchester88Magazine, 1H24K99 Aluminum MagFollower, 1894(.44), 70), Aluminum MagFollower, 1895(.45- MODEL ​1H24K99 SCORE HIGH WINCHESTER 88/100 � � tion andsemi-auto rifleshuntingagain � ​4G7A64 Take thoseWinchesterleverac case, .308boltface Seven, 700, 722,600, 660short Mag boltface 700, 721,Longcase,.308andH&H Seven, 700, 722,600, smallboltface OEM Quality Gives Flawless � MAG SLICK PAGE ab MAGAZINES � the chamber. Idealfor ac single round inlinewith curacy testing,silhouette, ab Performance Cartridge LoadingFor MARLIN

Straight-In, Single- Perfectly positionsa 178 - � ab Bolt Actions FITS

​

​

​ $ 10.99 $ 24.99 $ 61.99 24.99 $ 8.99 61.99 - - - most .22rimfire, tubemagazines.Cuttolength. UNIVERSAL MAGAZINE SPRINGS - 32" spring is long enough to fit crimped ononeend.Pakof 3. BRASS MAGAZINE TUBESONLY -.350"O.D. Brasstube,24" long, 3 KIT NO. 2 KIT NO. ingtons, Stevens andothers. 1 KIT NO. tubes aswellsomeearlierSavage/Stevens. brass tube with 24" spring, follower and long cap for Savage 29A both olderandnew, plusmanyothers. spring, withfollower, plug,andcross pin.ForsomeWinchesters, spring withfollower, plugandcross pin.ForsomeMarlins,Rem #084-028-332AS #084-028-032AS #084-027-324AS #084-027-003AS #084-027-002AS #084-027-001AS #724-101-375AS cartridge conversions.Ready-to-usewithmagazinespringretain Solves mostlast-round feeding problems encountered withlong- length actionstoaccept.375H&Hmagnum-lengthcartridges. follower whenconvertingmanycommercial andmilitary, standard- SPECS: on oneendonly. custom-make amagazinetofit.Alltubeblanks have arolled crimp placement magazinetube,these3kitsprovide thepartsneededto H&H lengthcartridgesupto3.375" O.A.L. SPECS: ing cutonbottom. #969-602-720AS #969-000-168AS and tempered from high-grademusicwire for long-lastingperfor stronger to guarantee reliable feeding every time. Precision wound SPECS: magazines. M1 Carbine fits15-round magazines.AK-47 fits7.62mm, 30-round mance andreliability. Mayfitmanyafter-market magazines aswell. The Parts You NeedTo EXTRA POWER MAGAZINE SPRINGS EXTRA Rebuild An Old Tube For mostof theolder.22’sthat nolongerhave afactory re Drop-in replacements for factorymagazinespringsare 5% MAGNUM LENGTHFOLLOWER Brass tube,steelfollower andspring. Steel, heat treated andtempered. Hardened steel,in-the-white.3.38" (8.6cm) long.Usewith.375 -Undersized .343"O.D. 17 -.350"O.D. tube,17 -.350"O.D. tube,22 .22 MAGAZINE TUBEKITS ab High-Quality Replacement Springs For WOLFF ab .22 Tube Spring,3-pak, .22 Tube Spring,each, Brass Tubes, 3-pak, No. 3Mag.Tube Kit, No. 2MagazineTube Kit, No. 1MagazineTube Kit, Mag LengthFollower, AK-47 Mag.Spring,3-pak, 9F12N24 15-Rd M1Carb.Mag.Springs,3-pak, ab High-Capacity Magazines SATISFACTION GUARANTEED SEMI-AUTO RIFLE WISNER � 1 / 2 3 / " (44.4cm) long.23 8 " (56.8cm) long.32"(81.2cm) 15 / 16 sary tousethisextra-long SINCE 1939 Solves Feeding Problems ​4H25L32 " long,centerlessground, ​3A21G05 ​5H33A79 ​4H2F76 No machiningneces ​4H6F66 ​3A16I04 ​3A18F90 ​9F16E26 � � � � � 1

� / � 2 " (59.6cm) �

​ $ 34.99 $ 22.99 $ 25.99 $ 19.99 $ 29.97 $ 17.29 22.99 $ 3.05 9.99 - - - - - — Advise# #084-089-512AS #084-089-100AS #084-089-000AS — Advise# #084-089-552AS SPECS: — Advise# #084-089-937AS from thesamematerial (brassorsteel)asthegun’soriginal tube. are top-qualitytubes,U.S. madetooriginalfactoryspecifications retainer pin,assembledandready for yourcustomer’srifle.These SPECS: (old) modelfitsgunsoriginallyequippedwithcartridgeguidespring. #895-629-000AS #895-476-200AS #895-871-600AS #895-405-705AS #709-022-007AS #709-022-004AS #709-022-003AS #709-022-002AS #895-442-710AS #895-442-700AS #709-022-008AS #895-699-000AS #895-696-100AS #895-496-200AS *Must also replace original inside magazine tube with new W4962A Inside Magazine *Must alsoreplace originalinsidemagazinetubewithnewW4962A InsideMagazine Made To Manufacturer’s INSIDE &OUTSIDEMAGAZINE TUBES Replacement Tubes STOCK # Replacement tubescompletewithspring,plug,follower and STOCK # STOCK # STOCK # Top-Quality Steel. Capsare blued,followers leftnatural. Length and diameter vary with specific gun. specific Lengthwith vary diameter and FOLLOWER &ENDCAPKIT Specs Tube whenusingthEW4762ASOutsideMagazineTube. Follower Refill, 4H8I54 End CapRefill, 4H7A55 End CapRefill, 4H7A55 A87-160 W44270 W6690 W6961A W4962A W44270NS MFG. NO. MFG. NO. W4762AS W6290 Std ( Follower/End CapKit, Rem. 512 R 522/572 Stev. VisLtd FOLLOWER REFILL PAKS END CAPREFILL PAKS 15 FITS SIZE / 16 OUTSIDE TUBES " long) .22 RIMFIRE INSIDE TUBES 270, 290 Win 150, 190, 250, Sav/Stev/Sprgfld (old) Rem 550 Rem 12 Marlin 39A Stevens VisibleLoad Win. 9422 Sav/Stev/Sprgfld plastic front sights Win 250, 270, 290w/ Win 90WRF Win 61 62A Win 1890, ’06, 62,

Win 90WRF 62, 62A Win 1890*,’06*,61, catalog. No. 1and2found elsewhere in & 2 fitsBrownells .22MagazineKits item. FollowerRefillPakfor Kits1 to most.22’s.Refillsare paks of 2per plus twotubecapstyles;fitoradapt Followers Plus Two Cap Styles .22 MAGAZINE TUBE #084-089-938AS #084-089-102AS #084-089-200AS One eachof sixfollower styles FITS FITS STOCK # STOCK # ab � � � ​4H28E41 5H24H99 5H22N99 5H22D99 5H22P27 5H24D39 5H22F27 Sav/Stev/ Sprgfld 5H24J39 5H24F39 9K14D74 9K14A53 9K14P53 9K24E77 5H24I39 Ov’size (1 9K14I53 � Kits 1&2 Win. 200 PRICE PRICE SIZE FITS $ 10.99 $ 12.99 3 10.99 $ 34.95 $ 24.99 $ 28.99 $ 28.99 $ 22.99 $ 22.99 $ 25.99 $ 25.99 $ 29.15 $ 27.99 $ 27.99 / $ 17.09 $ 17.09 $ 17.09 $ 17.99 8 Office/Tech: " long) ab #969-000-065AS #969-000-066AS power assures reliable feeding inallconditions.Drop-in replace ment fits20-round magazine. #969-000-143AS #969-000-142AS 1892, 1894;Marlin1893, 1894, 336. SPECS: also fitmanyheavy .45 cal.rifles,including.45-70 and.45-90. .38-.40 will also fit many .30/30 and .32 Special rifles. magazine tubes.Inaddition, factory spring;cuttofitmost reliable feeding. Longerthan spring for smoother, more tra poweroverthefactory #770-200-645AS #080-665-098AS and MarlinleverswithWinchesterdimensions.Seamlesstube(orig (and evenharder tofind)magazinetubesonmostolderWinchester Minor fittingmayberequired. Win. 1873.38-40 &.44-40; Win1892.38-40 &.44-40; Marlin1893&1894. Winchester 1894in.25-53, .32 Spec.,.30-30, .32-40, .38-55; Win.1866; SPECS: simplifies future repairs, too.Gunsmithfittingrequired. inals were seamed)restores proper functioningandgoodlooks; SPECS: ONE-RATE SHIPPING PROGRAM For Winchester & Marlin REDMAN Improves Tube Magazine WOLFF M14/M1A Better Than Original Replace thoseold,tired, GIspringstoimprove function.5%extra Approximately 20%ex Crisp, newreplacecement for theoften-dinged, tough-to-fix Lever Actions Spring steel,tempered, blue.Soldindividually. Blued steel.26"(66.0cm) longxapprox. .645 (16.3mm) O.D. Fits Tempered spring,40"(110cm)long.FitsWinchester1866, 1873, Feeding WINCHESTER 1866/1873/1892/1894 MAGAZINE SPRING ASK ABOUT OUR M1A Mag.Spring,10-pak, M1A Mag.Spring,3-pak, .44-40 MagSpring, .38-40 MagSpring, .645 MagazineTube, 98 MauserMag.Spring, MAGAZINE TUBE able feeding with all calibers and conversions. tempered, steel.10%extrapowerassures reli original militaryspecsfrom premium grade, able surplussprings.Newlymanufactured to

641-623-5401 10% Extra Power ForReliable Feeding Don’t messwithwornoutorquestion MAGAZINE SPRING -

ab ab MAGAZINE SPRING LEVER ACTION ​9F3A89 ​9F3A89 Extra Power Improves ​7G25I03 ​8K18Q19 ​9F16E27

​9F39N62 � Reliability 98 MAUSER � � � � � ab .44-40 will � $ 22.99 $ 28.99 $ 29.99 $ 5.49 55.99 5.49 ab - - - - RIFLE magazines & parts bottom metal & screws - - - - - ab 84.99 159.99 159.99 159.99 159.99 159.99 159.99 159.99 $ 26.10 345.00 � $ 159.99 $ 340.00 ​ �

179 �� �� ​ ������� ​

​ ​ ​

" (16.8cm) long. " (16.8cm)

8 / Dresses-Up Dresses-Up Gives a unique 5 ​

​4H23I47 �� Military Actions PAGE tions. Fully finished, tions. Fully lightweight alumi look to military ac ​3K321N85 ​3K316C64 ​4H77L44 ab REMINGTON 700 REMINGTON

����������������������������������������� ������������������������������������������������� ������������������������������������������������� ������������������������������������������������� ������������������������������������������������� � ������������������������������������������������ ������������������������������������������������� PAWS �� ������������������������������������������������� ab - - ​8G149C13 ADL-TO-BDL KITS ADL-TO-BDL

only, 98 Mauser Floorplate, 98 Mauser Triggerguard, Floorplate, 700 Short Tact. Floorplate, 700 Large Tact. 8G149A14 BDL Small SA Triggerguard/Mag Kit, BDL Small SA Triggerguard/Mag 8G148F30 BDL Standard SA Triggerguard/Mag Kit, Kit, Long/Standard Blue ADL/BDL 8G149I47 Kit, Long/Magnum Blue ADL/BDL 8G149C75 Short/Small SS ADL/BDL Kit, 8G149F24 Short/Standard SS ADL/BDL Kit, Long/Standard SS ADL/BDL Kit, 8G149C20 Long/Magnum SS ADL/BDL Kit, 8G149E48 Floorplate - aluminum, bake-on finish, black or clear anodized, or finish, black clear anodized, - aluminum, bake-on Floorplate Aluminum-Magnesium alloy, black, painted. 8 black, painted. Aluminum-Magnesium alloy, Steel, in-the-white. 8.3 oz, (235 g) weight. Fits BDL stocks. (235 g) weight. oz, Steel, in-the-white. 8.3 Floorplate BDL Floorplate TRIGGERGUARD & FLOORPLATE TRIGGERGUARD bolt bolt face. Long Action-Standard Short Action-Standard bolt face. Blue - polished finish. Stain Long Action-Magnum Converts blind maga blind Converts Genuine Remington Remington Genuine Parts To Convert ADL To Parts To Convenient Hinged Hinged Convenient To fits M98 Mausers only. Magazine box 3.4" 3.4" Magazine box 98 fits M98 Mausers only. (105 g) weight. oz. 3.7 long. (8.6cm) num unit reduces weight without sacrificing strength. Cast from Cast from sacrificing strength. weight without num unit reduces anodized fully machined and hard alloy, a high-tensile strength is longer than origi 98 magazine box and durability. strength for features Floorplate .30-06-length cartridges. nal to accommodate pattern by an Oakleaf Antelope Head (98) surrounded sculptured a way to dress-up a great only provides The floorplate background. fitting. minor military action. Requires SPECS: #684-098-100AS #093-306-030AS #684-098-101AS #093-306-020AS fectly. Requires minor inletting. Socket head screws included. head screws minor inletting. Socket Requires fectly. zine 700 ADL to convenient zine 700 ADL BDL. Im hinged floorplate and the appearance proves ADL rifles. Ideal function of aftermarket when adding a Provides to an ADL. stocks Kits rifle. the from cartridges removing of method safer convenient, maga Remington factory parts: triggerguard, include the following bolt Action-Small Short spring and spacer. zine, magazine follower, face. face. SPECS: SPECS: finish. - matte (SS) Steel less SPECS: stainless steel. spring - steel or follower, Magazine box, matte. #078-030-110AS #078-030-115AS #078-000-022AS #078-000-023AS #078-000-020AS #078-000-021AS #078-030-105AS #078-030-100AS

" ® - - 8 / 1 382.99 399.99 285.00 $ 275.00 $ 419.99 ​ ​ ab

​

​ ​

REMINGTON 700 REMINGTON Convenience Of A ab Gives Your Rifle The Rifle Your Gives Machined from 7075 T6 Machined from DETACHABLE DETACHABLE Detachable Box Magazine Detachable Box REMINGTON 700 REMINGTON BOTTOM METAL aluminum, these heavy-duty aluminum, these heavy-duty ������������������������������������������������ ������������������������������������������������ ������������������������������������������������ ������������������������������������������������ ������������������������������������������������ BADGER ORDNANCE TACTICAL REMINGTON 700/MODEL 7 REMINGTON 3Z247A94 Rem 700 SA Bottom Metal, Rem 700 LARem Bottom Metal, 3Z257M40 M7 Detachable Bottom Metal, .223, 3K382A99 M7 Detachable Bottom Metal, .308, 3K399D99 M5 Detachable Bottom Metal, 3K395H31 Items 7075 T6 aluminum, hardcoat anodized, matte black with steel matte anodized, 7075 T6 aluminum, hardcoat FLOORPLATE TRIGGERGUARD/ Of Detachable Magazines Detachable Of CONVERSION BADGER ORDNANCE BOTTOM METAL/BOX MAGAZINE MAGAZINE BOTTOM METAL/BOX Gives Your 700 The Versatility The Versatility 700 Your Gives Lightweight aluminum bottom Lightweight aluminum Heavy duty, steel duty, Heavy Solid Steel For Steel Solid Rough Duty Use Duty Rough ARMS PRECISION AMERICAN (2.9cm) wide. M5 - Fits Remington 700 short action. M7 - Fits Remington (2.9cm) gunsmith fitting. Model 7 rifle. May require ized for added surface strength and corrosion resistance. Inletting resistance. and corrosion strength added surface for ized comes The M5 is recommended. instillation professional required, magazine, but will also 5-round with one Accuracy International with either right or left hand magazines. Works accept 10-round Remington 700 short actions. The M7 fits Remington Model 7 rifles detachable magazine with a 10-round in either .223 and is available magazine. or .308 caliber with a 5-round SPECS: high, 1 long, 2 ½" (6.3cm) finish. 7 ½" (19.1cm) magazine, black oxide metal drops into a Remington 700 rifle and gives it detachable a Remington 700 rifle and into metal drops International well-known Accuracy Accepts magazine capability. into the is integrated Mag release separately). Magazines (available function - activate sleek look and ambidextrous for triggerguard position. changing your grip or without finger, using trigger release models (SA) and Long Action (LA) black finish. Short Action Matte Action (SA) and Long Action (LA) Short available. models available. and instructions. screws, Comes with two pillars, action box magazine replacement assembly includes grade 5 TORX assembly magazine replacement box screws and pre-made bedding pillars for exact fit and function. bedding pillars for and pre-made screws the of is positioned in front The long, paddle style magazine release anod Assembly is hardcoat easy manipulation. for trigger guard #100-014-047AS #100-014-046AS replacement for the for replacement aluminum factory and durability to tactical use rifles. part. Gives additional strength rapid yet provides holds secure latch Oberndorf-type floorplate for thicker are tangs rear and Front magazine. loaded of unloading stock per additional clamping power; allows contouring to match 093-000-061AS 093-000-060AS #093-000-055AS - - - - - order on the web 56.99 49.99 $ 13.49 354.99 ab � $ 339.99 $ 409.99 �� ​ brownells.com

® ​

​

​1G12P90 �� ������������������ SR-22 ® ​5E353A05 �� MAGAZINE ab Triggerguard assembly con Triggerguard Converts Your 700 To A To 700 Converts Your ​5E338D13 Detachable Magazine System Detachable Magazine verts your Remington 700 to ac verts your Remington 700 to cept tactical-style, detachable Accurate-Mag magazines from faster loading and and AICS for short fit to Available unloading. REMINGTON 700 REMINGTON FLE SPR RI ������������������������������������������������ �������������������������������������������������� �������������������������������������������������� CONVERSION KIT CONVERSION FNH USA Remington SA 308 5-Rd Bottom SA 308 5-Rd Remington Metal w/1 Mag, LARemington Win Mag 5-Rd 300 Bottom Metal w/1 Mag, Wingman +5 Mag Bumper, SPR Box Magazine Conversion Kit, SPR Box 9A401E99 Mag, 5-Rd, Box .308 Tactical 9A48H64 Mag, 10-Rd, Box .308 Tactical 9A54D90 RUGER TANDEMKROSS TACTICAL BOX MAGAZINE MAGAZINE BOX TACTICAL WINGMAN +5 MAG BUMPER MAG +5 WINGMAN ACCURATE-MAG TACTICAL BOTTOM METAL & BOTTOM METAL TACTICAL Steel, black matte finish. Kit includes bottom metal, two action finish. Kit includes bottom Steel, black matte Capacity By 5 Rounds By Capacity Boosts Factory Boosts Magazine Easy to install bumper increases bumper increases Easy to install Factory bottom metal converts DBM-equipped (Drop Box Box (Drop bottom metal converts DBM-equipped Factory Enables SPR To Accept 5- & 10-Round Detachable Mags 10-Round Accept 5- & To Enables SPR cludes one magazine, two pillars, and two action screws. cludes one magazine, two pillars, and two action screws. finish. Magazine black anodized – Aluminum, matte Triggerguard SPECS: 3.715" action accepts Long follower. finish. Polymer - Steel, black Teflon Pillars – Alumi black anodized. Screws – steel, matte magazines only. silver finish. num, natural factory magazine capacity to 15 factory magazine these durable Zytel, Made of rounds. an enhanced grip for the floor plate the length of bumpers extend the bumper of area surface extra bulk. Increased without adding mag capacity. Increases NOTE: easier. magazine seating also makes on restrictions for local regulations and your state Please check with high-capacity magazines. ownership of action and standard-length, (3.715" ) long action. Two aluminum ) long action. Two (3.715" action and standard-length, spacing between receiver proper included to provide pillars are magazine and oversized and bottom metal. Enhanced triggerguard in when wearing gloves. Available easier operation for make latch In Minor fitting may be required. .308 and .300 Win Mag caliber. #100-008-965AS #100-008-971AS #100-015-444AS zines. Installs easily with no modification to gun; does not fit SPRs to zines. Installs easily with no modification TSR and PBR models Can also be used on with hinged floorplate. Extra equipped with DBM but fitting by a gunsmith is recommended. separately. magazines available SPECS: magazine. magazine and one 10-round one 5-round screws, Magazine) SPR 308 rifles to accept higher capacity tactical maga Magazine) SPR 308 rifles to accept higher capacity tactical #119-000-078AS #119-000-079AS #100-011-060AS - - - - - ab ab 29.99 29.99 29.99 49.99 49.99 $ 29.99 $ 20.95 $ 64.99 " (12cm) ​ 8

" (8.6cm) " (8.6cm) / 8 5 ��� / 5 ������ ������ ������ �������� ab �������������� ������������������ 2C18B09 ​1K43B03 ​1K43P03 ​1K26G72 ​1K26D72 ​1K26E72 ​1K26F72 .404-Based Cartridges .404-Based Precision stamped, stainless Precision Extra Length For Ultra Mag & Mag Ultra Length For Extra steel magazine box has .110" steel magazine box the additional length to provide extra long clearance for required 800-741-0015

������������������������������������������������������ Since 1939 box have plenty of room room of plenty have box Long Window Long Action (LA)Action high. Long " (1.9cm) - 4 4 / 3 WYATT’S OUTDOOR WYATT’S REM 700 REM 1K57A85 Extended Center Feed Magazine Box, Extended Box, M-70 700 Extended Box, 700 Short Window Box, 700 Long Window Box, 700 WSM Standard Box, 700 WSM Extended Box, 700 SA Mag-Xtender, Rem. 3.06" (7.6cm) long. Fits Remington (7.6cm) 3.06" Short Window Box " (3cm) high. 8 / 1 Serious About Firearms Floorplate EXTENDED BOX MAGAZINE box and box Extended Glass-reinforced nylon, black. Short Action (SA) - 3 Glass-reinforced

ADL - 2 rounds, BDL - 2 rounds. Includes flatmetal follower. Includes flatmetal BDL - 2 rounds. ADL - 2 rounds, 2 rounds. Extend BDL - 2 rounds. Stainless steel. Capacity: ADL - 3 rounds, Impact-resistant, cartridge Impact-resistant, To Models With Hinged With Hinged Models To

MAG-XTENDER ARMSTECH Adds Extra Cartridge Capacity Cartridge Extra Adds #100-001-452AS SPECS: SPECS: rect feeding problems. .300" additional length provides the re length provides .300" additional problems. feeding rect has plenty Extended box extra long rounds. clearance for quired Mag and other calibers the popular .300 and .338 Ultra for room of case. Fits 700 ADL and BDL, requires Jeffery based on the .404 and bottom metal. to stock, receiver modification - Precision stamped, - Precision EXTENDEDZINE BOX CENTER FEED MAGA the center to cor from rounds feeds stainless steel magazine box rounds. rounds. 3.91" long. Fits Remington 3.91" Box Window long. Long (9.62cm) - 3.91" ed 700 long action. SPECS: SPECS: fits Short Magnum cartridges. M-70 with Winchester ing problems to 3.82". 3.4" magazine length from Winchester Model 70; increases and altering bolt stop and ejector. machining receiver Requires long, fits 700 short (7.5cm) - 2.95" - Standard 700 short action. WSM short action. long, fits 700 (7.6cm) Extended - 3.06" action and Model 7. long, fits Winchester Model 70 (9.7cm) 3.82" M-70 Capacity two rounds. rounds. long action. Capacity three for the popular .300 and .338 Ultra Mag and other calibers based on for with feeding lips give reliable case. Extra-long feed Jeffery the .404 a triangular have .284 Win. cases. Long and Short Window boxes case shoulder; holds three for extra room provides window that diameter cases. Remington fits 700 ADL and these large of rounds stop. bolt and receiver stock, to modification minor requires BDL, feed last round to prevent and center feed follower WSM has a flat #100-000-148AS #100-000-535AS #100-000-147AS #100-000-536AS #100-000-568AS #100-000-002AS SPECS: SPECS: rability and reliable function in all conditions. Drop-in fit, requires fit, requires function in all conditions. Drop-in rability and reliable and hinge pin. magazine spring, follower, your factory use of tray extends your Remington 700’s magazine capacity by replacing capacity by replacing Remington 700’s magazine tray extends your capacity of magazine the standard Increases the factory floorplate. cartridge stop Removable up to nine rounds. .223-based calibers cartridges, and increases tray to accept .308-based lengthens the Injection-molded rounds. to seven four from magazine capacity superior du for nylon 60% glass-reinforced high-strength, from long, 1" wide, 1 long, 1" (2.5cm) wide, long, 1" (2.5cm)

#432-000-001AS Orders/Tech: bottom metal & screws RIFLE #100-016-665AS #429-600-101AS #429-600-100AS room to easilyoperate thetriggerwithgloves.Low-profile, ambi most factoryandaftermarket curvedtriggers,andprovides enough or furthermodification. Large triggerguard openingaccommodates detachable box magazine.Eliminates theneedfor custominletting 700's MagpulHunterStock toconvertitthe convenienceof a 4.5 oz. (127g)weight. any AICS-pattern shortactionmagazine. Comes with one Magpul PMAG 5 7.62 AC magazine, and accepts fingertip -andwithoutchangingthepositionof theshootinghand. dextrous magazinerelease leverletsyoudrop themagwithone SPECS: bedding. Usesexistingmagazinespringandfollower. Provides a stronger base for seating tang and barrel screws or action original plasticpart;drop-in fitwithoutmodifyingtheoriginalstock. floorplate andtriggerguard. Floorplate iscontoured tomatch the ton 600backintoshootingconditionwiththismachinedsteel #359-168-000AS #359-169-000AS tion. SPECS: operates easily. Modelsfor longandshortactions. a highpolish.Oberndorf-stylemagazinelatch holdssecurely and for easierinlettingandexactfit.11L17steelengraves easilyandtakes fitting tocustomorfactorystocks. Edgeshave aslighttaperor“draft” gance totheRemington700. Made slightlyoversized for precise #848-000-007AS metal. custom-built rifle.Sameasoriginal1909 Argentine stylebottom white, ready for custom engraving. A beautiful addition to any fine, to allow for custom fitting. Polished to a 220 grit finish and in-the- Mauser floorplate is slightly oversized to overlap the triggerguard Floorplate -4.1" (10.4cm) long,tapers.95" (2.4cm) to1.15"(2.9cm) wide. SPECS: Steel Replacement For Factory Plastic For Factory Precision Machined, OriginalStyle; “STRADDLE” FLOORPLATE One-piece triggerguard/magazine welleasilysnapsintoyour Put yourReming Finely-crafted, steelfloorplates addapersonaltouchof ele Machined steel,one-piece, #520 - 7 TRIGGERGUARD &FLOORPLATE ab Steel, in-the-white.Fitsstandard Mauser98longactiontriggerguard. CUSTOM STEELFLOORPLATES Steel, 11L17 steel,in-the-white.#510-8 Oversized ForCustom Fit

SUNNY HILL HERITAGE ARMS DAKOTA ARMS 1 (MB) matte blueor(ITW) / 8 " (18.4cm) long,fitsshortaction. Hunter 700Bolt A Hunter 700Mag.Well, Triggerguard,ITW MB Triggerguard, #520 SAFloorplate, Floorplate, #510 LA Mauser 98Floorplate, MAGPUL - MAUSER 98 REMINGTON 700 REMINGTON 600 PAGE R Magazine Well in-the-white.6.5" (16.5cm) long. Gives Your Hunter-Stocked emington 700 700 The Convenience Of A ​9B152E31 1 ​9B138I00 / Detachable Magazine Distinctive, Classic Style; 8 " (20.6cm) long,fitslongac ​9E216A62 ​9E216N62 Replaces The Factory Replaces The Factory ab

​8D76I82 3K63M06 180 Aluminum � � ab ction � � � � ab $ 254.99 $ 177.99 $ 66.45 254.99 $ 89.99 160.99 - - - SPECS: have the polymer boot. old-style H-S Precision bottom metal and magazines that do not tridges. PleaseNote: Thisnewdesignisnot interchangeable with lets youadaptthesemagazinesfor usewithawidevarietyof car underside of therifleaclean,finishedlook.Feedliptool(soldbelow) aids insertionandremoval for quickmagchanges,andgivesthe mer bootonmagazinebottomhelpsprotect themagfrom impact, with standard calibers,8withbelted magnums. 3 roundscapcity -10rounds withmagnumcalibers.Extendedmagazine magazine. Regularmagazinecapacity-4rounds withstandard calibers, May require gunsmithfitting.Conversion kitincludesbottom metaland long and oz.(265 g)wt.FitsH-SPrecision 2000andRemington700BDLshort(SA) #393-000-042AS #393-000-039AS #393-000-040AS #393-000-038AS #393-000-033AS #393-000-032AS #393-000-037AS #393-000-031AS #393-000-030AS #393-000-043AS #393-000-041AS #393-000-035AS #393-000-034AS #393-000-036AS edge slipsoverthefeed lips,soyoucan rifle cartridges.Milled slotwithbeveled to reliably feed 43 of the most popular tachable magazinesfrom H-S Precision long action,andmagnumlengthde adapts .22-250and.308shortaction, MAGAZINE FEEDLIP TOOL -Easily SA Detachable SA Detachable Mag w/10-rd Mag w/10-rd Mag Stainless steel,matte blackfinishwithTeflon actions. Will fit Rem 700 ADL with modificationswith stock. ADL to 700 Rem Will fit actions. (LA) H-S PRECISION DETACHABLE MAGAZINE 3C129K99 WinBox Magazine,8-Rd,LA/.300 3C84L99 WinBox Magazine,3-Rd,LA/.300 3C84Q99 Box Magazine,3-Rd,LA/.30-06 3C129E99 SA/.308 Box Magazine,10-Rd, 3C84J99 SA/.308 Box Magazine,4-Rd, 3C84N99 SA/.22-250 Box Magazine,4-Rd, 3C89D16 SA/.223 Rem Box Magazine,5-Rd, w/8-Rd Mag, Belted MagnumConversion LA w/3-Rd Mag, Belted MagnumConversion LA w/3-Rd Mag, MagazineConversion LA/.30-06 w/10-rd Mag, SA/.308 MagazineConversion w/4-Rd Mag, SA/.308 MagazineConversion w/4-Rd Mag, SA/.22-250 MagazineConversion w/10-rd Mag, SA/.223 MagazineConversion Mag /8-rd Mag LA Detachable LA Detachable ab SATISFACTION GUARANTEED � � � � � � � ​3C299Q99 ​3C299L99 ​3C349K99 ​3C299B99 ​3C299F99 REMINGTON 700 ​3C329M99 ​3C299H99 the magazinetodrop free for side thetriggerguard releases Spring-loaded fingerlatch in of adetachablebox magazine. to giveitalltheconvenience 700 BDL’s factorybottommetal places yourfavorite Remington magazine retention, whilepos large rear catch assist in proper speedy reloads. Guideslotand lubricating Teflon construction withatough,self- keep themagsecure. All-steel and sides of the floorplate help itive-locking springsonbottom resists scratches andwear. Poly No-Gunsmithing Installation Easy-to-install systemre - CONVERSION For Fast, EasyReloads; SINCE 1939 On Your 700 � � � � � � � ® coating. Approx. 9.3

​

​

​

® finishthat ​

​ ​ ​ $ 299.99 349.99 299.99 299.99 299.99 299.99 329.99 129.99 129.99 84.99 84.99 84.99 84.99 94.99

- - - - - #100-011-232AS matte blackfinish. SPECS: Gunsmith fittingisrequired. aluminum standsuptotherigorsof hard use.NOT adrop-in unit. ing yourshootinghand'sposition.Sturdy yetlightweightmachined guard letsyoucleanlydrop themagtoground withoutbreak Easy-to-operate pushbuttonrelease rightinfront of thetrigger International Chassis System (AICS) magazines, available separately. trous release onhisshortaction700. ItusesthepopularAccuracy - whoneedsamodern,detachablebox magazinewithanambidex is designedfor thetacticalprofessional -orotherprecision shooter #954-000-016AS #954-000-017AS #954-000-018AS #954-000-015AS L/A -8 triggerguard andfloorplate, mayrequire minorinletting. with one-piecebottommetal.Fitsstocks that camewith3-piece post-'64 SuperGradeandSafari Express modelsthat originallycame one-piece bottommetalassembly. LongActionisadrop-in fitfor fit for post-'64Winchestershortactionsthat have analuminum inletted for hingedfloorplates. WinM70shortactionisadrop-in fit for short action (SA) and long action (LA) Remington 700 stocks action screws. Rem 700acceptsallafter-market triggers.Drop-in and openseasily. Requires originalmagazinespring,follower, and and aprecise fit.Push-button,triggerguard release holdssecurely pure quality. Tapered, 2ºdraft onthesidesallowfor easier inletting places theblack,paintedaluminumparttogiveyourriflealookof Precision detachablemagazinesfor Remington700only. H-S old-style and new both with use for Designed thick. mm) (9.5 3⁄8" SPECS: mercial cartridgesfrom .22-250to.458 WinMag. mensions listed on the tool. Provides adjustmentfor mostcom confidently tweakthefront andrear widthstocaliber-specific di (18.1cm) longx1 SPECS: Blue, high-polish finish. S/A - 8" (20cm) long x 1 x long (20cm) 8" - S/A finish. high-polish Blue, Win M70- #393-000-015AQ Factory Aluminum Factory Machined Steel, Replaces The Beautifully machined,one-piece,forged steelbottommetalre WILLIAMS FIREARMS 1 / 2 Aluminum, natural finish. 3" (7.6 cm) long, 1 13⁄16" (4.6 cm) wide, Machined 6061T6aluminumbillet.TypeIII hardcoat anodized, Steel, drop-forged. Rem 700 matte-7-1/8" - Blue, finish. S/A " (21.6cm) longx1 Part CUSTOM STEELFLOORPLATE AICS-PATTERN METAL BOTTOM SEEKINS PRECISION 1 / 8 " (2.8cm) wide.L/A-7 Metal, Rem 700Short-Action Bottom 4E212J59 Win M70BottomMetal,L/A, 4E212G59 Win M70BottomMetal,S/A, Rem 700BottomMetal,L/A, 4E214J99 Rem 700BottomMetal,S/A, 4E214N99 Magazine FeedLipTool, WANT MORENEW PRODUCTS? PRODUCTS ADDEDDAILY 1 / 4 ​8C195H56 " wide.FitsPost-'64Model70. ab � � � � SHOP ONLINE! REM 700/WINM70 Detachable Box Magazines � 700 To Use Popular AICS 15 / The SP-AICS bottommetal 16 Easily Converts Your " (20.1cm) longx1 REMINGTON 700 ​3C22N00

​ ​ ​ ​ 1 / 4 " (3.7cm)" wide. � ab $ 208.05 $ 214.99 1 / 214.99 215.00 215.00 $ 27.99 8 " wide. Office/Tech: ------#100-004-303AS #100-004-682AS ing magazine.FitsSurgeon XLandRemington700longaction. -15.1 oz.ington 700 short action.LongAction(LA) (428g)weight, includ including magazine.FitsSurgeon Tactical andRSRreceivers, plusRem magazine, blackoxidefinish. Short Action (SA) - 10.8 oz. (306g)weight, SPECS: pillars and available separately). Includestwo.625" O.D. aluminumbedding polymer follower, andtempered steelspring(additionalmagazines national 5-round magazinewithruggedsteelbody, self-lubricating a matte blackfinish.Comeswithasmooth-feeding AccuracyInter odized for additional surface strength and corrosion resistance, with machined from extra-strong 7075T6aluminumbillet,hardcoat an abrade thehandorsnagonsling,vegetation, orclothing.Precision terior edgesare rounded orbeveledtoeliminate sharpnessthat can beveled magwelltohelpensure fast,positivemagchanges.Allex features include a low-profile ambidextrous magazine release and with the included bedding pillars for best accuracy. Performance with minor fitting; short- and long-action models available. Install with Surgeon receivers andreplaces Remingtonbottommetal #080-000-559AS #805-000-001AS #100-005-216AS 1894, 1895, 30AS, and30AW leveractionrifles. SPECS: alteration. tion andremoval. Replacestheoriginal,factorylever screw without diameter, knurledheadprovides anon-slipgraspduringinstalla dard leversfor large loopleversfor cowboyactionshooting.Large SPECS: magazine. part. Drop-in fitonRemington700ADLandotherrifleswithablind plastic piece.PolishedSilverreplaces thebead-blasted,factory than theoriginalfactorypart.Polished Black replaces thefragile, ished finishtolookbetterandlastlonger (8.6cm) long, Beautifully machinedwithahighlypol Lightweight; High-Polish Finish Steel, blued,matte finish.12-28 NFmalethread. FitsMarlin 336, 7075 T6aluminum,hardcoat anodized, matte black,withsteel BAT MACHINE Aluminum, anodized, blackorsilver, high-polishfinish.3 ALUMINUM TRIGGERGUARD Improves Appearance QUICK TAKEDOWN SCREW ab 1 ab / DETACHABLE MAGAZINE 4 "-28 tpicapscrews for ultra-secure installation. 5 / 8 " (15mm)wide. BOTTOM METALBOTTOM WITH 9B399F99 BottomMetalw/DetachableMag, LA 9B365Q40 SA BottomMetalw/DetachableMag, Quick Takedown Screw, Silver 700Triggerguard, Black 700Triggerguard, plus makes quickworkwhenswappingstan easy lever removal for a thorough cleaning,

641-623-5401 For Quick Lever Removal & Installation SURGEON RIFLES Oversized, steeltakedown screw allows MARLIN LEVERACTION � REMINGTON 700ADL � box magazine.Perfect match added safety of adetachable the speed,convenience,and or Remington700riflewith Detachable Box Magazine The Convenience OfA Remington 700 Rifles Upgrade yourSurgeon - Gives Surgeon Or ​9D35K21 ​9D33J12 ​8K15A75 � � �

​ ​ $ 369.99 $ 40.99 399.99 $ 19.99 39.99 ab 3 / 8 ------" RIFLE bottom metal & screws " - - - - 16 / 5 ab "-28 4 / 1 16.99 $ 4.99 $ 4.40 $ 17.99 $ 12.99 $ 21.99 ​

181 " (3.8cm). ����� ​ 2 �������

/

® 1 ������������������� "-28 x 1 4 PAGE / 10/22 700 ADL Kit ADL 700 " (3.8cm). 1 ​4H10M92 ​4H15C41 2 ® / 1 ab " (2.7cm), (1) center guard guard (1) center " (2.7cm), 16 SIG 556 / 1 REM 700 REM " (4.1cm) long; (1) rear guard guard long; (1) rear " (4.1cm) 8 ​3B19G56 / 5

"-28 x 1 4 Replace worn or damaged fac Stainless Steel Allen Head / 1 WIN M70 ab Screws For Maximum Torque Maximum Screws For "-28 x 1 4 tory triggerguard screws with these with screws tory triggerguard screws stainless steel, Allen head / 1 ���������������������������������������� 3Z2B61 ��������������������������������������������������������� ������������������������������������������������������� Replacement for factory screw eliminates eliminates screw factory for Replacement SCREW KITS SCREW " Allen wrench. May require minor alteration minor alteration May require " Allen wrench. 32 Dresses Up Your 10/22, Attractive & Secure Attractive 10/22, Your Dresses Up those unsightly stripped and burred screw screw those unsightly stripped and burred / N.E.C.G. 5

SIG 556 Pivot Pin, 700 BDL Screw Kit, Rem 700 ADL Screw Kit, Rem 10/22 Socket Head Takedown Screw, Head Takedown 10/22 Socket 3Z4C34 Model 70 Triggerguard Screw Set, Model 70 Triggerguard 1F16K21 10//22 Socket Head Takedown Screw, Screw, Head Takedown 10//22 Socket per each, ​ " (3.8cm), (1) rear guard screw - screw guard (1) rear " (3.8cm), KNS PRECISION 2 / 1 Hunting & Target Rifles Target & Hunting PUSHBUTTON PIN PIVOT RUGER VOLQUARTSEN ab " (1.7cm) long. Fits Winchester Model 70 triggerguards. " (1.7cm) 16 TRIGGERGUARD SCREW SET SCREW TRIGGERGUARD / 13 Steel, black oxide finish. Steel, black oxide Stainless steel, natural finish. Includes: (1) front guard screw, 1 screw, guard finish. Includes: (1) front Stainless steel, natural includes: (1) front guard screw - screw guard includes: (1) front Stainless steel. 700 BDL Kit Hardened steel, black, matte finish. Fits 10/22 and 10/22 Magnum. steel, black, matte Hardened Quick-Release For Fast For Fast Quick-Release " (2.7cm), (1) rear guard screw - screw guard (1) rear " (2.7cm), Takedown Without Tools Without Takedown Pushbutton-release pin replaces the factory pivot screw and the factory pivot screw pin replaces Pushbutton-release Standard length, stainless steel screw kits length, stainless steel screw Standard 16 Rust-Resistant Hardware For Stainless, For Stainless, Hardware Rust-Resistant STAINLESS STEEL TRIGGERGUARD STEEL TRIGGERGUARD STAINLESS SOCKET HEAD TAKEDOWN SCREW SOCKET HEAD TAKEDOWN / 1 includes: (1) front guard screw - screw guard includes: (1) front x 1 screw - 8-36 x 1 screw SPECS: SPECS: socket-heads. feature ton screws SPECS: nut at the front of the receiver to enable quick, separation of the of separation quick, enable to receiver the of front the at nut Three, only. with finger pressure SIG 556 upper and lower receivers wear spring-loaded detent balls hold the pin in place and prevent Black hole when removed. or binding in the pivot hole or receiver stainless steel internal parts resist the receiver; finish matches oxide corrosion. match factory, stainless triggerguards for good for triggerguards stainless factory, match resists stainless steel finish Natural, durability. and all-weather looks Reming removal/installation. screw caused by marks rust and hides #084-273-004AS #923-000-049AS - 3 or More - #084-273-003AS (3.3cm) long; (1) center guard screw, 1 screw, guard long; (1) center (3.3cm) to stock or receiver. tom touch to your 10/22. No modifications SPECS: aging the screw head or the stock. Set includes three standard- stock. Set includes three head or the aging the screw plus length screws, SPECS: that allow you to apply maximum torque without slipping and dam and slipping without torque maximum apply to you allow that slots. Allows faster and easier stock removal, and adds a unique cus slots. Allows faster and easier stock removal, screw, 1 screw, to screw heads to fit custom bottom metal. heads to fit custom bottom to screw #930-000-026AS #661-000-057AS - - ab ab ab 79.99 $ 17.99 $ 21.99 $ 16.99 $ 16.99 $ 16.99 $ 39.99 $ 54.99 ab " (8.5cm) " (8.5cm) 8 ��� ��� /

3 �������� ���������������� ������������������� 9A12B83 ​6K15D24 ��������������������� ��������������������� ��������������������� ​8B72I04 ​8B48A78 SOCKET HEAD ​4D15J53 Modern Efficiency ​4D37B83 ​4D19E41 ​4D16J50

® only, Dresses Up Triggerguard For Triggerguard Dresses Up Very popular with target shoot popular with target Very " Allen wrench fits socket perfectly. perfectly. fits socket " Allen wrench Fills The Unsightly Hole Unsightly The Fills On MilitaryOn Metal Bottom 32 M77 / ® 5 Relief cut allows removal of triggerguard triggerguard of Relief cut allows removal FORSTER M-98 ab MAUSER 98 MAUSER the lock screw. without removing screw ab RUGER Triggerguard, Triggerguard, Assembly, Triggerguard #S130 Screw Kit, #S150 Screw Kit, #S160 Screw Kit, set of 2, FN Mauser Screws, set of #S110 Screw Kit, Front/Rear Lock Screw Set, Front/Rear SCREW SETS SCREW TRIGGERGUARD SCREWS TRIGGERGUARD Replaces FactoryReplaces Part " (1.6cm) wide. Assembly includes steel magazine release and includes steel magazine release wide. Assembly " (1.6cm) 8 6061 T6 aluminum, anodized finish, matte black. 3 finish, matte 6061 T6 aluminum, anodized Blued steel. Length varies. Blued steel. Length Steel, blue, polished finish. Head Dia. - .273" (6.8mm). Shaft Length Length Shaft Steel, blue, polished finish. Head Dia. - .273" (6.8mm). / 5 TRIGGERGUARD TRIGGERGUARD LOCK SCREWS LOCK TRIGGERGUARD Action Screws For Vintage Guns Vintage For Screws Action High-Strength For Long Life; Long For High-Strength GALAZAN WINCHESTER REPLACEMENTFLE RI INC. TGE High-quality, machined aluminum machined aluminum High-quality, B-SQUARE Avoids damage to screws, floorplate and stock that can happen so and stock that floorplate screws, damage to Avoids slips. heads if screwdriver slotted screw easily with regular ers and other accuracy buffs who must tighten guard screws with screws ers and other accuracy buffs who must tighten guard tension. consistent, precise SPECS: ish. Available as a complete trigger guard assembly with installed assembly guard as a complete trigger ish. Available for only, trigger guard and spring, or release magazine push-button original Requires and spring. magazine release use with the original screws. triggerguard SPECS: triggerguard replaces the original pot- the replaces triggerguard part and adds years of metal factory to your rifle and an attractive service life Ruger M77 short tang safety, early model, fit for appearance. Drop-in the original fin black to match matte Anodized and long actions spring, blued, matte Ruger M77 with finish. Fits long and short action spring, blued, matte tang safety. long x #100-004-427AS #100-004-426AS #344-200-130AS #344-200-150AS #344-200-160AS #122-505-598AS #344-200-110AS Win. 94 (pre-’64). Eighteen action screws. Matte blue. Matte screws. Eighteen action - Win. 94 (pre-’64). S130 blue. Matte - Winchester Model 92. Nine action screws. S150 one forend action screws, Three S160 - Winchester Model 70. blue. Matte screw. Winchester 90/06. Six action screws. Matte blue. Matte Six action screws. - Winchester 90/06. S110 SPECS: SPECS: Set - 60° head relief. Rear Screw - 90° relief. Screw Front - .190" (4.8mm). and (6) rear. (6) front of #319-414-398AS - - order on the web 6.99 " hex $ 7.99 $ 7.99 $ 9.99 $ 9.99 $ 6.99 $ 6.99 $ 9.99 32 / $ 19.99 5 PRICE ​ ​ brownells.com

"-28 x 2.2" or 4 / 1 4H4F31 4H6F52 4H7F04 ������������� 4H4N31 4H6G38 " (12.7mm) wide, wide, " (12.7mm) 2 / 1 ����������������� "-28 x 1.9", 8-36 x 1.8" 8-36 x 1.8" "-28 x 1.9", 4 / 1 ​8K6P15 ab HEAD Slotted Slotted Allen Allen Allen ab ​3Z17J51 Triggerguard Screws Triggerguard "-28 x 1.7" and "-28 x 1.7" 4 Oversize head with Oversize / Turn Your Own Custom Own Custom Your Turn 1 - " button head screws and instal " button head screws 16 / 3 socket and longer length for longer length for and socket "-28 x 1.3", "-28 x 1.3", 4 / 1 LONG BLANKLONG SCREW �������������������������������������������������������� �������������������������������������������������������� " hex size. Sold 20 per pak. " hex size. FITS 32

/ "-28 x 2.2" or 8-36 x 2.2". Kits include the correct "-28 x 2.2" or 8-36 x 2.2". Kits include the correct 5 4 / 1 " (5.7cm) long. .250" (6.3mm) dia. shaft, .425" .425" dia. shaft, long. .250" (6.3mm) " (5.7cm) 4 / 1 Saiga Triggerguard, Long Blank Screw, pak, Long Blank Screw, Nickel-Plated Long Screw Kit ADL, Nickel-Plated 4H6E81 Long Screw Kit BDL, Nickel-Plated 4H4P36 Rem. 700 ADL/BDL Savage 10/110-16/116 Savage Rem. 700 ADL Rem. 700 BDL Rem. 7 ab SAIGA TRIGGERGUARD SAIGA "-28 x 1.7", "-28 x 1.7", ab 4 / 1 Aftermarket Stocks Aftermarket IREARM SOLUTIONS FIREARM SUPERIOR RAM Steel, blue. 2 Steel, powder coated, black. 2" (5cm) long, black. 2" Steel, powder coated, Steel, blue. Slotted Head - Steel, blue. Slotted Steel, nickel plated. Kit includes: plated. Steel, nickel Bedding Rifle Actions In Bedding Rifle Actions LONG TRIGGERGUARD SCREWS TRIGGERGUARD LONG Provides An Easy Triggerguard Triggerguard Easy An Provides STOCK # STOCK Drop-in replacement triggerguard triggerguard replacement Drop-in Precision-turned, heat-treated heat-treated Precision-turned, Conversion For A Pistol Grip Stock Pistol Grip A For Conversion Don’t Get Caught Short When Short Caught Get Don’t " (3.1cm) high. Includes two 8-32 x high. " (3.1cm) 4 / 1 stock to military-style furniture with a pistol grip. Fits the existing with a pistol furniture stock to military-style button head screws Includes the factory guard. holes for receiver a neat- for the receiver inside from tighten into the triggerguard that looking exterior. SPECS: instructions. lation converts a Saiga sporting rifle to a standard sporting rifle to a standard converts a Saiga a smooth-fitting, Provides guard. AK-47/74 butt the sporter converting from when installation clean-looking 1 #100-004-744AS SPECS: SPECS: oversize stocks. .250" diameter shaft can be threaded to fit most fit to threaded be can shaft diameter .250" stocks. oversize bolt actions. (10.7mm) diameter head. (10.7mm) #080-012-020AS #084-271-000AS #084-272-700AS #084-272-701AS #084-272-707AS #084-273-001AS #084-272-703AS #084-272-704AS 8-36 x 2.2". Kits for Remington 700 ADL and BDL. Remington 700 8-36 x 2.2". Kits for SPECS: SPECS: SCREWS - Nickel REM 700 TRIGGERGUARD NICKEL-PLATED stainless steel 700 Remington with visually blend screws plated for longer than the factory screws .250" actions. Approximately with flexibility when bedding in synthetic or wood stocks greater repeatable allow sockets head Allen depth. cross-sectional thick, rifles. or target settings on match torque SPECS: ding Remington and Savage rifle actions in synthetic or wood stocks or wood stocks rifle actions in synthetic ding Remington and Savage .250" longer than depth. Approximately cross-sectional with thicker, flexibility in bedding depth. Action greater for the factory screws slotted head to match with the standard, available kits are screw allow repeatable that head sockets or with Allen the factory screws rifles. or target settings on match torque Allen Head - screws for the model listed. for screws screws provide extra reach when bed extra reach provide screws " - - 8 / 3 69.99 179.99 179.99 179.99 $ 59.99 149.99 149.99 149.99 , natural , natural $ 179.99 $ 149.99 ab ​ ​ ​

��������

​

����������� ​ ​ ​

​

​1A52D52 ​1A63B03

When Wearing Gloves Wearing When Allows Fast Cycling, Even Even Cycling, Fast Allows MARLIN 1895 MARLIN 800-741-0015

REMINGTON 700 ADL REMINGTON 1895G - Fits Marlin 1895G 1895G and 1895M ������������������������������������������������� ������������������������������������������������ ������������������������������������������������ ����������������������� ������������������������� ������������������������������������������������� ������������������������������������������������� ���������������������������������������������������

ab REMINGTON 700 REMINGTON ADL Triggerguard, Blue, ADL Triggerguard, SS, ADL Triggerguard, 1H179C99 1H179H99 1H179F99 Marlin 1895G Finger Lever, Blued, Marlin 1895G Finger Lever, SS, Marlin 1895G Finger Lever, ������������������� 8D135C27 ����������������������������� Blued, Marlin 1895 Finger Lever, SS, Marlin 1895 Finger Lever, 1H179Q99 Rem 700 SA Bottom Metal, SS, 700 SA Bottom Metal, Rem 8D135Q27 700 LARem Bottom Metal, Blued, 8D135Q27 700 LARem Bottom Metal, SS, Rem 700 SA Bottom Metal, Blued, 700 SA Rem 8D135N27 " (15mm) wide. 8 / 5 STEEL TRIGGERGUARD BIG LOOP FINGER LEVER BIG LOOP WILD WEST GUNS

Steel, matte blue or stainless steel, natural, matte finish. 3 matte blue or stainless steel, natural, Steel, matte

Carbon steel, blued, matte finish, or stainless steel (SS) Carbon steel, blued, matte . Drops-in without special fitting or stock alterations. (SS). Drops-in

Machined steel triggerguard replaces the plastic factory part for part for the plastic factory replaces Machined steel triggerguard Oval finger loop has plenty of room for shooters with large shooters with large for room Oval finger loop has plenty of Machined steel bottom metal drops into Remington 700 rifles to into Remington bottom metal drops Machined steel

All Steel Construction Upgrades Strength & Appearance Strength Upgrades Construction Steel All Steel Bottom Metal Steel Bottom Gives Long Service Long Gives Life

(8.6cm) long x (8.6cm) Orders/Tech: SPECS: SPECS: finish. Loop - 3" (7.62cm) long, 2" (5cm) deep. 1895 - Fits Marlin 1895 pistol - 3" (7.62cm) finish. Loop grip and Marlin 336 pistol grip. grip. straight quires minor fitting. quires SPECS:

or long actions (SA) or long actions short for easy access. Available side the bow for (LA) steel (SS). Includes stainless or natural carbon steel in Blued final fitting. washers for shim precision instructions and SUNNY HILL SUNNY BOTTOM METAL added strength, a nicer appearance, and improved fit and “feel” for for fit and “feel” a nicer appearance, and improved added strength, your Remington ADL rifle. Completely finish machined to closely a the factory contours, then drilled and beadblasted for match stainless in blued steel or natural finish. Available smooth, matte steel hands or those who operate their 1895s wearing gloves in cold 1895s wearing gloves in their operate hands or those who critical at thicker made and CNC machined Precision, weather. Re operation. reliable for and hardened points; heat-treated stress replace factory original and gives long service life. Requires minimal Requires life. and gives long service factory original replace out release button push features design floorplate Hinged inletting. #981-000-006AS #981-000-019AS #981-000-018AS #100-015-325AS #100-015-327AS #100-015-326AS #078-000-068AS #078-000-066AS #981-000-002AS #100-015-324AS SPRINGS & RECOIL BUFFERS bottom metal & screws RIFLE #713-000-111AS #713-000-099AS 9mm and.45 ACP. SPECS: 5,000 rounds. Easyinstallation withincludedinstructions. #319-414-070AS — Advise# #319-414-270AS #319-414-306AS #319-414-300AS #319-414-171AS #319-414-170AS #319-414-098AS #965-411-000AS #319-414-998AS reduce wearonbothcomponents.Installseas bolt from makingcontactwiththereceiver to and tear. Provides acushionthat prevents the reduce boltslap,felt recoil, andoverallwear high. Fitsallmodelsof AK-47, Mak-90, Galil,andValmet. contact toreduce wearandpro pads eliminate metal-to-metal SPECS: required. Goodfor at least5,000 firingcycles ily overrear of springassembly;nopermanentmodifications torifle SPECS: Fits RugerMini-14 andMini-Thirty. SPECS: tect thereceiver. Polymer buffer fitsontheboltspringto High-density, polyurethane POWER CUSTOM STOCK # Protects The Receiver Reduces Bolt & Receiver Wear; Blued steel.Length varies.a Polymer, black. Molded polymer,Molded chamberedMarlin CampCarbine blue. Fits in Polyurethane rubber, blue.

From Damage POWER CUSTOM RUGER TRIGGERGUARD SCREWS FORSTER #411 RI FLE SHOK-BUF RECOIL BUFFER Less Felt Recoil Slotted GuardScrews,9A5K32 recoil. Rugged moldedpolymerwilllastfor at least bine cycling smoothly and reliably. Helpsreduce felt coil buffer keeps your9mmor.45 ACP CampCar Restores Reliability & Helps Reduce Felt Recoil ab Marlin CampBuffer, AK-47 Recoil Buffer, set of 4, Slotted GuardScrews,Mauserlocking, 9A7A84 Slotted GuardScrews,Win.70, setof 3, #411 Shok-Buf, Drop-in replacement for awornorbroken re ® WILSON COMBAT MINI-14 1 / 2 " (1.3cm) long, Springfield LongRearTang Screw, pair Sako (Setof 2) Springfield andKrag,pair Enfield straightenedguard, pair Enfield asissued,pair Mauser non-locking,pair � RECOIL BUFFER SLOTTED HEAD SLOTTED ​9A11P14

MARLIN CAMPCARBINE - b Machine Turned Tool Steel For Maximum Strength & Service ® PAGE /MINI-THIRTY ​5F13F69 AK-47 � 15 / FITS 16

" (2.4cm) wide,1 ​3A7Q34 ​3A9J01

182 � - ab �

� � ® ® 1 / 4 " (3. 2cm) ab $ 14.95

$ 5.99 ​ $ 9.99 $ 9.99 $ 7.99 11.99 - - #100-005-274AS #071-110-004AS #071-110-007AS #071-110-003AS #071-110-006AS #071-110-005AS #071-110-008AS #071-110-002AS that hasaworn-outorkinked spring.MadetooriginalUSGIspeci the boltandhelpsprevent expensivereceiver damage.Installseas SPECS: Keep aspare onhandasabackup. fications, and perfect for putting the “spring” back into an old rifle. SPECS: ily; nopermanentmodifications required. #100-005-287AS helps prevent premature cliporammoejection.Readytoinstall. worn or bent spring in M1 Garand rifles and SPECS: mer spring,ejectorandextractorspring. contains oneeach:extra-powerrecoil spring,extra-powerham M14-945 M14/M1A - Fits all models of the M14 and M1A rifles. Kit ejector spring,andextractorspring. one each:extra-powerrecoil spring,extra-powerhammer M1-900 GARAND-Fitsallmodelsof M1Garandrifle.Kitcontains #080-665-945AS #080-665-900AS Brings backreliable extractionandfeeding cyclestoaGarand HEAVY-DUTY CLIPLATCHHEAVY-DUTY SPRING Heavy-duty cliplatch springreplaces a Helps PreventPremature Clip& Tempered springsteel,natural finish. Polyurethane, clear. Spring steel,natural finish. OPERATING ROD SPRING FULTON ARMORY FULTON ARMORY Ensures Reliable Feeding&Extraction Ammo Ejection 10/22 Recoil Buffer, M1A/M14 Recoil Buffer, Mini-14/30 Recoil Buffer, SKS Recoil Buffer, 1G12Q00 AK/Valmet/Galil Recoil Buffer, M1 OpRod Spring, HK 91/03Recoil Buffer, FN/FAL-L1A1 Recoil Bufr, Clip Latch Spring, M14-945, M1-900, Provides agentlecushionthat graduallyslows better muzzlestability, reduces actionnoise. helps extendtheservicelife of yourrifle;gives “Guaranteed Superior” PRO-SPRING KITS Shock-absorbing, polyurethane buffer RIFLE RECOIL BUFFER SATISFACTION GUARANTEED BUFFER TECHNOLOGIES Cushions Rifle Bolt & Receiver, ​8K20M31 � ​6K20I72 Prevents Excess Wear ab M1/M14/M1A ab M1 GARAND M1 GARAND ​3K4G88 ​1G7C92 � �

​3K8Q23 SINCE 1939 ​1G7K92 ab ​1G16C02 ​1G12N00 ​1G12Q00 ​1G12P00 � � � � ab

​ � � � � $ 28.99 $ 28.45 $ 13.99

$ 8.49 18.99 $ 5.99 13.99 13.99 13.99 8.99 8.99 ab - - - #883-000-003AS rifle. accuracy. Nogunsmithingormodifications to a smooth,crispfeel that helpsyougetoptimum the factorytriggertotwoorthree pounds.Gives SPECS: #840-000-037AS #080-000-192AS #100-014-510AS alignment, plusreduce dragandfriction.Kitcomeswithtwoejec and spacers.Bushingsspacersalsohelpmaintainmainspring be setat fivedifferent levelsbyusingtheincludednylonbushings you fine-tunetheactionof yourRossi92.Mainspringtensioncan Spring - Spring -2 SPECS: peatable searengagementfor acleanbreaking trigger. spring helpsensures consistentcycling;hammerspring givesre tion andlong-lastingperformance totheM1AandM14. Oprod SPECS: and frictionfor fast,easycyclingandquickfollow-up shots. proved triggerpull.Light,leverlatch springreduces latch pressure power hammerspringreplaces theheavy factoryspringfor im educing theeffort required tocycletheleverassembly. Reduced and illustrated instructions. stud spring,twoejectorsprings,instructions,4nylonbushings,3spacers, .44-40, and.44 Magnum.Includesmainspring,carrierstopspring, friction SPECS: and easy. parts and the illustrated instructions make installing springs simple rifles. Springshave closed,ground endsfor aflushfit.Colorcoded tor springs,of different strengths, for useonsmallorlarge caliber Premium Quality Springs For Reduces Pull Weight For Smoother Letoff MARLIN LEVERACTION SPRING KIT PALO VERDE GUNWORKS TIMNEY BROWNING SUPERIOR SHOOTINGSYSTEMS Two, reduced powerspringsletyoulower Factory weight,chrome siliconspringkitrestores reliable func Reduced-tension springshelp ab TRIGGER SPRING KIT Action Fine-Tuning Chrome silicon steel.OpRodSpring-15 Steel springs,zinccoated. FitsRossiModel92in.38//.357, .45 LC, CHROME SILICON SPRING KIT Steel, pakof 2.FitsA-Bolt, Medallion,Micro-Medallion. Steel, natural finish.Hammer Spring - 1 13 Performance For500,000 Compression Cycles 1 ACTION SPRING KIT / / 16 4 ab " (5.7cm) long.FitsM1AandM14. " (2.1cm)long.FitsMarlin39A/444/94/95/336Seriesrifles. A-Bolt Trigger SpringKit, M1A/M14 SpringKit, Lever ActionSpringKit, Rossi '92SpringKit, MODEL 92 give theCowboyActionshooterad vantages of alight,crisptriggerpullwhiler Time For Higher Cowboy Action Scores Smoothes Trigger Pull & Speeds Cycle High-quality, reduced power springs A-BOLT ​7B26J96 ROSSI ​4H21J01 3 / ​8K11I34 4 1 " (40cm)long.Hammer / ​3H25I81 4 " (3.8cm) long.Latch M1A/M14 � � � ab � $ 26.99 $ 23.99 $ 16.99 $ 29.95 ab Office/Tech: ------#969-000-173AS #100-004-731AS #969-000-174AS spring orRPtriggerspring.FitsRem.700/721/722. SPECS: helps lowerfelt triggerpullfor better, more consistentaccuracy. proved, more positiveejection.Reducedpower(RP)triggerspring place wornoutejectorspringswithextrapower(EP)for im tions. FitsMarlin1894, 1895, 336, 444, 39A. (2) bluehammerspringbushings,(4)red adjusterwashers,andinstruc hammer spring,lever-plunger(2)whitespringbushings, SPECS: Zinc-coated steelsprings,nylonbushings/washers.Kitcontains tions that typicallyworkbestfor specificcalibers. photos includerecommendations of bushing/washercombina on the spring plate. Complete instructions illustrated with color prevent itfrom crawling overthefront of the strut orslidingsideways friction-reducing nylonbushingskeep hammerspringalignedand by choosingtherightcombination of bushingsandwashers.Tough, so youcangetthehammerspringtensionthat suitsyoubestsimply tension settings.The difference between each setting is about8%, ings andadjustmentwasherstoselectoneof sevenhammerspring with thespringsfrom thekit,thenusecolor-coded nylonbush bolt rifleaperformance liftwiththeseeasytoinstallsprings.Re #403-170-000AS 1.5 to2lb.triggerpull.Ex return springhelpsdeliver SPECS: pops thestopupafter re-installing thebolt. tra power bolt stop spring HOLLAND Lightens Trigger Pull;Improves Reduced powertrigger NEW PRODUCTS ADDEDDAILY YOU CANSHOP ONLINETOO! Stainless steeltriggerspring,musicwire bolt spring. Spring steel.Purchase separately, includes oneeachEPejector Bolt Stop Function PALO VERDE GUNWORKS WOLFF LEVER ACTION SPRING KIT www.brownells.com REMINGTON 700 9F2L47 Wolff Remington EP EjectorSpring, 9F2M47 Wolff Remington RP Trigger Spring, Marlin SpringKit, Rem. 700SpringKit, REMINGTON 700/721/722

641-623-5401 - � � rifle. Simplyreplace thefactoryham making permanentalterations tothe more consistenttriggerpullwithout for asmoother-operating actionand you fine-tuneyourMarlinlevergun mer springandlever-plunger spring For A SmoothAction & Consistent Trigger Pull; No Gunsmithing Easy-to-install componentslet ​7B18P87 Provides More Positive ​3K13P38 SPRING KIT Ejection, Reduced Give yourRemington ab SPRING KIT MARLIN Trigger Pull � ab �

​ ​ $ 21.99 $ 13.99 $ 3.49 3.49 ab ------RIFLE STOCKS SPRINGS & RECOIL BUFFERS ------23.70 23.70 23.70 23.70 19.90 19.90 19.90 19.90 14.20 50.99 $ 19.90 $ 42.99 ​

fl. oz. of of fl. oz. 2 / 183 1

�������� ���������� ab ������������ ������������ ������������ �������������� �������������� �������������� ���������������� ���������������� , rubber pistol grip , ® PAGE ab ​3K10C83 Weapon Control Weapon ​3K20N66 ​3K20A66 ​3K20E66 ​3K17H35 ​3K20M66 Magpul Original Equip ​3K15B33 ​3K17K35 Comfortable Shape & ​3K16C26 ​3K17M35 Anti-Slip Surface Enhance Anti-Slip ������������������������������������� ment grip delivers the same the benefits as ergonomic MOE version, with mi AR-15 Lube Bottle Grip Core snaps se AK/AK+ GRIPS - - grips AK sold separately. Grip Cores, ® grips are overmolded with non- with overmolded are grips AK+ ® ����� ������������������������������������������������ ​8K44N30 AK-47/74 MAGPUL MOE OREND & GRIP FOREND

8K36E90 Hogue AK-47/74 Overmolded Forend, Hogue AK-47/74 Overmolded Forend Hogue AK-47/74 & Grip, AK-47/74 OVERMOLDED OVERMOLDED AK-47/74 MOE AK Grip, Black, MOE AK Grip, FDE, MOE AK Grip, ODG, MOE AK Grip, Gray, MOE AK Grip, Plum, MOE AK+ Grip, Black, MOE AK+ Grip, FDE, MOE AK+ Grip, ODG, MOE AK+ Grip, Gray, Lube Bottle Grip Core, Items Reinforced molded polymer, Black, Flat Dark Earth (FDE), O.D. Flat Black, molded polymer, Reinforced Handguard – Polymer and synthetic rubber, black. 6 ¼" (15.8cm) black. 6 ¼" (15.8cm) rubber, and synthetic – Polymer Handguard Weapon Control Weapon , Stealth Gray, and Plum. 4.13" (10.49cm) maximum length, (10.49cm) and Plum. 4.13" Gray, (ODG), Stealth HOGUE Easy-to-install forend up forend Easy-to-install Comfortable, Non-Slip Non-Slip Comfortable, Gripping Surface Enhances Surface Enhances Gripping have aggressive crackle texturing on the sides and deep horizontal texturing on the sides and deep horizontal crackle aggressive have straps help you maintain excellent and rear on the front serrations environment. any in traction on firm purchase slip synthetic rubber to give you an exceptionally positive control. more the grip for your favorite gun oil or CLP. Sold separately. separately. Sold gun oil or CLP. your favorite nor adaptations for AK platforms. Like the AR line, this one-piece Like AK platforms. for nor adaptations grip and pistol factory standard a polymer upgrade easily replaces a comfort your hand for contours of is designed to fill the natural shots. Removable black polymer cap able, solid grasp and stabilized small items; compartment for internal storage in bottom reveals MIAD accepts Magpul AR-15 the grip and holds the underside of in the cavity curely SPECS: Green oz. maximum thickness. 2.86 base, 1.21" (3.07cm) at wide 2.1" (5.3cm) with milled and stamped AK-47/ Compatible wt. w/hardware. (81.08g) underfolders, receivers, and non-reinforced reinforced AKM receivers, included. Depending on re screw grip nuts. Mounting and all common some fitting. may require tolerance, ceiver grade, designed for use on for grade, designed AK-47/74 Chinese and Russian a stable, non- models, provides the ut for slip gripping surface weapon and most in comfort rub a Cobblestone™-textured features Lower handguard control. shield, and pop-out rubber plugs for ber palm swell, metal heat covers allow you to included top Two rail attachment. Picatinny classic look, or a 12 o’clock posi choose between the smooth, accessory mounting options. rail for Picatinny tioned, integrated stamped and milled Fits rails. Picatinny 3" one and 2" two Includes or without Overmolded with Available receivers. SPECS: rails – long. Picatinny black. 4¼" (10.8cm) – Polymer, Covers long. Top rubber long. Pistol Grip – Synthetic black. 2" (5cm) and 3" (7.6cm) Polymer, and Chinese models; milled and stamped Fits Russian over fiberglass. hardware. rail mounting Includes Picatinny receivers. shooting comfort. increased for with finger grooves #408-000-110AS #408-000-109AS #100-011-613AS #100-016-417AS #100-016-419AS #100-016-418AS #100-011-614AS #100-011-615AS #100-016-416AS #100-011-612AS 100-019-349AS 100-016-543AS - - $ 7.99 $ 9.99 $ 21.99 $ 179.99 ������������� ​ " (2.2cm) wide. 1½" " (2.2cm) wide.

10 FS2000 / 9 - ������������������������� ​8K18H39 ��������������������������������� You Accessorize Your Your Accessorize You Tactical Forend easily in Forend Tactical

AK-47/74 M1/M14/M1A FactoryHelps System Rail ​3K9C01 ab stalls onto FS2000 and gives ​2Z6I63 " (6.8cm) long. " (6.8cm) 3 / 2 �������������������������������������������������� TACTICAL FOREND TACTICAL PISTOL GRIP ® Steel retaining clip provides a snug, rattle-free a snug, rattle-free clip provides retaining Steel FNH FS200 Tactical Forend, FNH FS200 Tactical 9A177L39 AK-47/74 Pistol Grip, AK-47/74 Handguard Clip, Grip Adapter, For Secure, Rattle-Free Handguard Attachment Handguard Rattle-Free Secure, For STAR DOUBLE ing a vintage rifle or completing a new project. Fits a new project. ing a vintage rifle or completing Made to original rifles. M1 Garand and M14-style grasp on the handguard. Replaces an old clip lost Replaces an old clip lost grasp on the handguard. excessive by “sprung” one or maintenance, during restor properly for Perfect and installation. removal AR-15 Pistol Grip Pistol AR-15 ab ARMORY FULTON HOGUE AK-47/74 Increase Comfort & Control Increase Comfort & AR-15 PISTOL GRIP ADAPTER GRIP PISTOL AR-15 Polymer, matte black. 2 matte Polymer, Aluminum, matte black finish. 6" (15cm) long. 3.1" (7.8cm) wide. (7.8cm) black finish. 6" (15cm) long. 3.1" Aluminum, matte Steel, Parkerized, matte black finish. matte Steel, Parkerized, Fiberglass core, overmolded synthetic rubber exterior, black. Fits rubber exterior, overmolded synthetic core, Fiberglass HANDGUARD RETAINING CLIP RETAINING HANDGUARD FNH FS2000 Upgrade Your Kalashnikov With Kalashnikov Your Upgrade Rubber “overmolded” pistol grip replaces pistol grip replaces Rubber “overmolded” Polymer adapter lets you mount your Polymer adapter Non-Slip Surface & Orthopedic Shape Non-Slip MONOGRIP three M1913 Picatinny rails positioned at 3, 6 and 9 o’clock for 6 and 9 o’clock for 3, rails positioned at M1913 Picatinny three component mounting lights, lasers and other accessories. Factory fit and function with FNH proper and ensures stock forend, replaces use. Includes construction stands up to hard Aluminum quality. and mounting hardware. trigger guard matching SPECS: SPECS: (423g) wt. oz. 14.9 trol. “Cobblestone” surface texture provides a non-slip grasp. Fits grasp. non-slip a provides texture surface “Cobblestone” trol. and won’t loosen. Counts as a wear, solidly against the frame, resists Code Title 18 Section 922(r) part in compliance with U.S. U.S.-made requirements. part-source SPECS: rifles. and compatible AK-47/74 the small, stubby original wood grip and gives and grip wood original small, stubby the with shape Orthopedic purchase. solid a you shock, reduces palm swells and finger grooves con and improves shooting comfort, increases #119-000-052AS #408-000-106AS (3.8cm) tall. .9 oz. (26g) wt. oz. tall. .9 (3.8cm) fit and finish. for USGI specifications SPECS: SPECS: SPECS: SPECS: favorite AR-15 pistol grip onto AK-pattern AK-pattern pistol grip onto AR-15 favorite fits stamped AK receivers. rifles. Easily pistol grip. to AR-15 slight modification require will Milled receivers your to weight any hardly adds construction polymer Lightweight instructions. Fits both AK-47 and mounting hardware rifle. Includes and AK-74. #100-008-034AS #100-005-286AS - order on the web 7.99 7.49 $ 8.79 24.99 $ 7.99 $ 18.99 $ 39.99 ����� ab brownells.com ��������� ������������� �������������� ��������������� ���������������� ​9F5Q30 ​9F6C22 FITS ������������������������� 9F5M87 ​2Z6F88 ​5K12L26 1860/1866/1873 ​5K17G05 ab

​2Z36H03 Rem. (short) 700/722/725/40X (24#) Ruger 77 (Short/Long Action) (21#) Rem. (short) 700/722/725/40X (24#) 721, 725 (24#) Rem. (Lng) 700, Springfield 1903 (All Models) (16#) FF WOL - ab FF MARLIN WOL WT. 32# 28# 28# 28# 20# Reduced Power Sprg Kit, Reduced Power Sprg, only, Reduced Marlin 94 Spring Kit, 92 Spring Kit, Rossi L/L Spring Set, L/L Spring Screw Set, Blitzschnell Springs, each, Faster Lock Times For Bolt Action Rifles Action Bolt For Times Lock Faster Light Trigger Pull Trigger Light TER/LEVER SPRINGS & SCREWS & SPRINGS TER/LEVER Mainspring, ejector, lever tension and trigger springs. Rossi 92 - Mainspring, ejector, Springs - Music wire, stainless steel base. Screws- Steel, blue, stainless steel base. Screws- Springs - Music wire, Spring steel. Marlin 94 Carbine - Mainspring and lever tension Steel, Hammer spring – 1.25" (31.7mm) long; Finger lever spring Steel, Hammer spring – 1.25" (31.7mm) BLITZSCHNELL STRIKER SPRING BLITZSCHNELL STRIKER STOCK # STOCK Reduced power hammer spring lowers trigger pull, reduced Reduced power hammer spring lowers trigger pull, reduced Improves striker acceleration and can help correct ignition ignition and can help correct acceleration striker Improves Don’t be afraid to tackle to afraid be Don’t LEVER SPRING KIT LEVER SPRING LIF UBERTI SHOP SMITH THE Combine Fast Action Cycling & Cycling Action Combine Fast Direct Replacement Replacement Direct Parts Make Action Jobs Make Parts REDUCED POWER HAMMER & FINGER POWER REDUCED Faster & More Consistent & Faster SPECS: SPECS: long. (12.7mm) - .5" power finger lever spring lowers lever closing effort. Fits Marlin power finger lever spring lowers lever closing effort. 336 and 444. 1895, models 39A, 1894, #100-000-512AS #969-000-108AS #100-000-511AS #969-000-114AS ment lifter and lever spring sets are made from music wire with a music wire made from lever spring sets are ment lifter and after action jobs time consistent mounting base for stainless steel them loose. the stock springs or leave time. No need to hand grind gouged lever and lifter cam surfaces. Rec Completely eliminates sold sets screw tpi 6-40 high-quality, the with use for ommended usually are factory screws threaded because the rough, separately, head with correct manufactured Screws damaged when removed. dimensions and length. SPECS: Set springs. Screw 6-40 tpi. Spring Set includes (2) Hardened, matte-finish. separately. must be purchased Springs and screws includes (2) screws. problems. Made from high quality, heat-treated, round, spring round, heat-treated, high quality, Made from problems. determined Ratings seat. a flat for stock. Ends closed and ground custom of is in the bolt. Installation the spring as it by compressing weight shown in ( ). Factory triggers may change ratings. action jobs on the Uberti action jobs on ’66 and ’73 Winchester ’60, viable lack of clones for replace parts. These direct #100-002-465AS #969-634-032AS #969-640-028AS #969-634-028AS #969-635-028AS #969-648-020AS — Advise # — #100-002-464AS SPECS: SPECS: springs. cal. rifles. and .45 Fits .38/.357 ------ab 7.49 7.49 7.49 9.00 . $ 7.49 15.99 13.99 $ 9.99 $ 9.99 $ 9.00 ® � � $ 17.99 $ 11.99 $ 15.99 $ 16.85 $ 10.29 ��� ab ��������� ��������� �������� �������� ab ������������� ������������� ������������� ​9F5F30 9F5P30 �� ​9F5P30 �� ������������������� ab ​9F5B30 ​9F11I32 ����������������������� ​9F9G90 ������������������������� ��������������������������� ​9F11A32 ​9F6B37 ab ​9F8E49 ​9F11D91 ​9F6D95 ab ​9F7K29 ​9F7J07 ���������������� ������������������������ ​9F13P88 ab MARLIN 94/ROSSI 92 94/ROSSI MARLIN 800-741-0015

ab ab ​9F6M37 - 20% reduced power (RP) trigger/sear - 20% reduced ® Mark II Kit, ® ab AK-47 Std Recoil Spring, Std Recoil AK-47 Spring, XP Recoil AK-47 M1 Carbine Kit, Spring, Garand Recoil Spring, Recoil M1A/M14 Mauser 1898 Kit, Hammer Spring, Mini-14 Mini-14 Recoil Spring, Recoil Mini-14 10/22 Tune-Up Pak, 10/22 Tune-Up Pak, 10/22 RP Tune-Up 3-Pak, Spring, 10/22 RP Trigger M77 Spring, 3-pak, RP Trigger/Sear 3-pak, Spring, RP Trigger/Sear SKS Kit, RECOIL & HAMMER SPRING - Extra-power RECOIL ® Springs To Improve Functioning Improve Springs To & 77/22 fits all calibers. Contains XP ham Pak fits all calibers. Contains XP - Tune-Up ® ® - Kit contains (1) extra power, 24 lb. 24 power, MARK II - Kit contains (1) extra ® FF WOL Tunes Your Action For Cowboy Shooting Action Your Tunes GUNSLINGER SPRING KITS GUNSLINGER SPRING SPRINGS 77/17 ®

- Fits Chinese and Russian variants. Kit contains (1) and Russian variants. Kit - Fits Chinese .62mm lb. reduced power hammer spring (factory is approx. 34 lb.) 34 spring (factory is approx. hammer power reduced lb. Used by successful Cowboy Action shooters worldwide, these Used by successful Cowboy Action shooters worldwide, LE TUNE-UP FLE TUNE-UP RI 2

LEE’S GUNSMITHING / 1 KITS & INDIVIDUAL & INDIVIDUAL KITS #969-000-171AS #969-180-520AS #969-166-200AS #969-180-550AS duced in diameter to eliminate spring bind. duced in diameter to eliminate #969-000-062AS #969-000-098AS #969-180-750AS #969-000-129AS #969-301-900AS #969-000-063AS #969-166-300AS #969-000-172AS #969-000-129AS #969-000-204AS #969-000-133AS reliable, high-quality springs provide smoother action function and smoother action function high-quality springs provide reliable, slightly re trigger pull. Coil springs are felt plus reduces operation, and (1) reduced power sear/magazine latch spring. sear/magazine latch power and (1) reduced Blitzschnell striker spring and a 20% reduced power (RP) trigger/ spring and a 20% reduced Blitzschnell striker fits original model M77 spring also sear spring. Trigger/sear ger than standard for additional spring tension needed to help for ger than standard reliably. some guns cycle more - Get reliable operation with a standard with a standard operation SPRINGS - Get reliable RECOIL AK-47 weight, factory-spec spring. Extra Power (XP) spring is 15% stron 1898 - Kit fits military and sporting actions. Contains (1) MAUSER spring (factory is 19 lb.), bolt sleeve stop spring, floor 22 lb. striker spring and sear spring. catch plate - Extra power recoil springs recoil power Extra - SPRINGS M1 GARAND & M1A/M14 chambering. reliable functioning, more give improved - Fits U.S. M1 Carbine (except Universal Model Car M1 Carbine (except M1 CARBINE - Fits U.S. hammer bine). Contains one each: Ejector spring, extractor spring, spring, plunger spring, sear spring, magazine catch spring, safety spring. slide stop spring, and extra power recoil ber 181 and higher. MINI-14 RUGER M77 RUGER mer spring, XP trigger spring, and RP sear spring for a clean, crisp and RP sear spring for mer spring, XP trigger spring, fits all calibers and Pak Power (RP) Tune-Up trigger pull. Reduced RP trigger spring, and RP sear spring contains XP hammer spring, do not Paks pull. Tune-Up trigger and reduce let-off to improve an even Spring to produce springs. Add RP Trigger recoil include trigger pull. lighter-feeling smoother, 10/22 RUGER RUGER 27 SKS 7 spring lightens trigger pull. Fits models chambered in .17 HMR, .17 in .17 HMR, Fits models chambered spring lightens trigger pull. Mach 2, .22 LR, and .22 WMR.

springs fit Mini-14, -30, Ranch Rifle. Decreases lock time, improves improves lock time, Ranch Rifle. Decreases -30, springs fit Mini-14, serial num digits of Recoil spring fits guns with first three reliability. Orders/Tech: STOCKS RIFLE #100-019-296AS #100-019-297AS #119-000-057AS #119-000-026AS #119-000-056AS USG Railinstallson top of thehandguard and provides 6¼"Pica and blends seamlessly into overall contours of the firearm. PS90/P90. Ensures proper fitandfunction it easytomountaccessoriesonyourFN wt. (167g) oz. 5.9 OAL. (16cm) 6-7⁄8" hardware included. M1913USGRail- SPECS: weapons light,laser, orsimilartacticalaccessory. either sideandoffers 1¾"of Picatinny railthat’s justenoughfor a standard factorysight.BarrelSideRailmountsparalleltobarrel on tinny railmountingspacefor optics,whilepreserving useof the Includes mounting blockandrailclamp. (3) 6½"(16.5cm) Picatinny railssidesandbottom. (1)3½"(8.8cm) railtop. SPECS: rifles. Includesmountingblock,railclampandhardware. possible. Factory extensionensures proper fitandmatch toSCAR use modernshootingtechniqueswithoffhand placedasforward as especially usefulfor lightsandforegrips, andbenefitsshooterswho other gear. Comeswithapolymer5-slotMagpulM-LOK railsec and fasthandling.Nosharpedgestoabrade yourhandorcatch on 2" outsidediameterfor anexceptionally low profile for easygrasp complete choiceinaccessory-mountinglocation. Slim,too,witha of M-LOK slots,thislightweight,one-piecehandguard givesyou inside diameter. SPECS: tion. Enables MountingOf Lasers, “Personal Defense Weapon” Barrel Side Rail - 3"(7.6cm) OAL. 1oz. (29g)wt. Factory-original rails make With aT-marked MIL-STD 1913Picatinny toprailandsevenrows Lights & Optics On The

ab TACTICAL FOREND EXTENSION Aluminum, hardcoatAluminum, anodized, (16.5cm)matte6½" black. O.A.L. 6061 aluminum,hardcoat anodized, mateblack. 1.75" (4.4cm)

Machined aluminum,hard-anodized, matte black.Mounting ACCESSORY RAILS 18 15" Ruger Handguard , Handguard, 9A53E99 PS90/P90 SideBarrelRail, 9A129K99 PS90/P90 M1913USGRail, Extension, FNH SCARTactical Forend FNH USA FNH R M-LOK Handguard ® RugerPrecisionRifle™M-LOK uger Midwest Industries Add Rail Space To SCAR16S/17S Forend SCAR 16S/17S � ® � PrecisionRifle™M-LOK ® ​9A239E00 Precision R ​2A187B15 sections. Far forward attachment er andoffers four additionalrail to existingrailontheSCARreceiv SCAR 16S/17S. Extensionattaches mounted closer to the muzzle on tension allowsaccessoriestobe ​2A164F28 PS90/P90 PAGE Factory tacticalforend ex � �

� 184

​ With A Multitude ​ & Fast Handling Accessory Slots Accessory Narrow-Profile ifle™ Of M-LOK

$ 239.00 $ 129.99 $ 174.95 194.95 M1913 53.99 - - - - #100-007-122AS spacing andperfectly matched seamallowsrailcoversandacces the rifle’s built-in factory rails. Proper additional 5"of railspaceinfront of factory bottomrailandbarrel. sling points.Installation requires disassemblyandremoval of the barrel system;alsoretains theoriginal,limited-rotation forward not interfere withfactorysights ortheSCAR’suniquequick-change sories tobeinstalledacross boththefactoryand SRXrails.Does SCAR 16, 17, LandH. tachmentscrews, wrenchesAllen installationand Fits FN instructions. long, 2 SPECS: #100-015-143AS #100-016-980AS and dismounting.Comeswithone5-slotM-LOK railsegment. service life. IntegralQDslingswivelsockets allowfastslingmounting aluminum construction adds minimal weight while ensuring a long your Tavor. Requires nopermanentalterations toyourrifle,andall- - instantlyexpandsyouroptionsfor puttingtacticalaccessories on slots that instantlyexpandyourop handguard provides plentyof KeyMod with 5-slot railadded. flat darkearthfinish.5.4 oz (150g)wt.without5-slot rail.6.3 oz. (178g)wt. SPECS: Comes withone5-slotKeyMod aluminumrailsegment. QD sling swivel sockets allowfastsling mounting anddismounting. all-aluminum constructiongivesyourrifleextrastructuralrigidity. no permanentalterations toyourrifle,addsminimalweight,andits on yourTavor. Like MI's M-LOK Tavor handguard, thisonerequires tions for puttingtacticalaccessories rail segment. 5.4 oz. (167g) wtwithrailsegment. SPECS: #100-016-977AS 74 variants,bothstamped andmilled.Includeshardware. construction won'tweighdownyourrifle.FitsmostAK-47 andAK- ing rail.Two-piece designmakes installation simpleandlightweight Adds Rail Space For Lights& Bolt-on railsystemprovides an Snap-on replacement for factory More Accessory-Mounting More Accessory-Mounting fNSCAR PRIMARY WEAPONSSYSTEMS Options For Your Tavor 1 / Machined aluminum,matte blackfinish.4.8 oz (149g) wt.without Machined 6061aluminum,hardcoatanodized, matteor black Aluminum, hard-coatAluminum, anodized matte5"(12.7cm)finish, black. 4 "(5.7cm) wide,2

KEYMOD HANDGUARD Accessories SRX RAILEXTENSION MIDWEST INDUSTRIES Midwest Industries Midwest Industries SRX SCARRailExt., Tavor Keymod HG,Black, Tavor M-LOK Handguard, AK-47/74 M-LOK HG, M-LOK Handguard M-LOK Handguard 1 SATISFACTION GUARANTEED / 2 "(6cm) high,7.9 oz. (224g) wt.Includesat quickly andeasilyinstallsonAK-pat tern rifles and gives an M-LOK mount slots for attaching M-LOK accessories plastic handguard provides plentyof Adds M-LOK Mounting Capability ab Accessory-Mounting Options Accessory-Mounting Machined aluminumhandguard Snap-on replacement for factory Dramatically Expands Your - To Your Kalashnikov SINCE 1939 4B186K11 ​2A111L46 ​2A110P35 ​2A97D12 � IWI TAVOR AK-47/74 � T � avor � ab � ab $ 194.99 $ 114.95 $ 115.99 $ 99.99

ab - - - - #100-004-668AS #100-004-669AS #100-009-454AS permanent modifications required. T-marked MIL-STD 1913Pica just like anAR-15/M16. Installsinminuteswithnogunsmithingor lights, lasers,optics,verticalgrips,andotheraccessoriestoyourAK, accessories usedontheAR-15/M16 platform. Extendedmodelfea tinny railsbringyourAKuptospeedbyacceptingawiderangeof ized, matte black.1 SPECS: mounting hardware andinstructions. variants, stampedandmilled.Includes mounting options.FitsmostAK-47/74 Handguard at 9½"longfor evenmore Handguard smithing. Available inUniversal Smooth Handguard quicklyinstallswithnogun sling swivelswherever youneedthem. rotation QD sockets accept push-button mum versatility andlightweight.Fiveanti- three moveablerailsegmentsoffer maxi handguards withT-marked toprailand AK S HANDGUARDS -Smooth-sided Fits mostAK-47/74 variants withstampedormilledreceivers. locking compound, andinstructions.Installation requires fieldstripping. Both modelscome withmounting hardware, Allenwrenches, thread Extended -9½"(24.1cm) long,12½oz. (354g)wt.,availableinblackonly. weight. (280g) oz. 10 (5.3cm)O.D.wide. 2-1⁄8" long, (15.2cm) 6" Green. SPECS: co-witness withiron sights(lowerone-third). Trijicon Tri-Power., Vortex StrikeFire, andPrimaryArmsM3. Allows with 30mm tube, including: Aimpoint CompML2, Burris Speed Dot, a topcoverthat enablesmountingof mostfull-size red dotsights tion 922(r)parts-countrequirements. Optic-ready ML2modelhas as one U.S.-made component for United States Code, Title 18, Sec tures agenerous 9½"of bottomrail.MadeintheU.S.A., soitcounts wt. SS Universal –6"(15.2cm) long.9.1 o.z.(257g) #100-009-664AS #100-009-745AS #100-006-317AS handguard comes with MI’s “U.S. Palm” top designed for direct at stamped ormilledreceivers. tions. Installation requires fieldstripping.FitsmostAK47/74 variants with ing hardware, Allenwrenches, thread lockingcompound, andinstruc 6" (15.2cm) long,2 SPECS: parts-count requirement. made componentfor UnitedStates Code,Title18, Section922(r) Picatinny accessory rails. Installs in minutes. Counts as one U.S.- third of theoptic.Lowersectionhasthree, T-marked MIL-STD 1913 the Micro sotheiron sightscontinuetobevisiblethrough thelower tachment of anAimpointT-1 Micro red dotopticalsight.Positions Accessory MountingFlexibility Of A Accessory SS Extended –9½"(24cm) long.11.3 o.z.(320g)wt. Machined aluminumAK-47 three-rail Railed AR 6061 T6aluminum,hardcoat anodized, Black,Flat DarkEarth,or An Integral Aimpoint Mount Machined 6061 T6 aluminum, hardcoataluminum, T6 6061 Machined anodized, matte black. 6061 T6aluminum,hardcoat anod OPTIC-READY HANDGUARD MIDWEST INDUSTRIES MIDWEST INDUSTRIES UNIVERSAL HANDGUARD at 6"longandExtended ‑15 Handguard, Plus 1 4 / AK-47/74 HG,FDE, Ext. AK-47/74 HG,Black, AK-47/74 HG,Black, 2A126C07 AK-47/74 Handguardw/T-1 Mount, 2A165H93 AK-47/74 SSExtendedHandguard, Handguard, AK-47/74 SSUniversal Smooth / 8 5 " (5.4cm) wide.10oz. (283g)wt.Includesmount "(4.5cm) wide. ab venience andversatility of railmounting Brings The Versatility Of AR-Style Rail � � � Railed handguard givesyouthecon Mounts To Your Kalashnikov ​2A135E71

​2A110Q31 ​2A110F31 - - - � AK-47/74 AK-47/74 ​2A141M40 ab � � Universal Smooth Universal Smooth Handguard SS Extended SS Extended

Handguard

� ​ ​ $ 134.99 $ 139.99 $ 119.99 144.99 169.99 119.99 Office/Tech: ------#100-014-891AS Components Mount-N-Slot accessoriestogiveyouavastlyin expands theaccessorymountingver (13.7cm) long,1.9" (4.8cm) O.D. 4oz. (113.4g) wt.FitsIWITavor rifles. SPECS: for securingweaponlightcables. lock firmlyinplace.Includeswrenches for instllation andzipties to fullyengagetheARClightslotsandusesteelbacker plates to with tapeswitchinsidethehandguard. Railsegmentsare lugged segment, andatacticallightringfor mountinga1"diameterlight short 5slotaluminumrailsegment,onelong11 it won’tshiftunderheavy stress orsharpimpact.Comes withone front mountingscrews originallyusedbythefactoryhandguard, so mounts securely totheriflebyanintegralrear supporttabtothe creased arrayof accessorymountingoptions.The ARClight with Magpul proved ventilation, andergonomic comfort. Itisfullycompatible a mere 4oz. andprovides greatly enhancedstructuralrigidity, im Advanced RailChassis-Lightweight,orARCLightfor short,weighs satility of yourIWITavor rifle.Thelightweight,machinedalumium #997-000-010AS serves asanadapterfor installinganAKhandguard onaSaigasport steel capscrew, blackoxide finish. SPECS: rod ontherifle,enhancingauthenticmilitarylook. rectly positionedholeinthefront of thecapletsyoucarryacleaning hex-head crossbolt ensures asecure, rattle-free installation. Cor ing rifle. Rugged, all-aluminum construction, with a hardened, steel full-size AK-47/AKMwithfixed orfolding stocks. such asremoval of slingloops.Model1-9 rifles, allmodelsmayrequiretions in minor modifications toweapon, SPECS: the barrel andforearm coolevenduringsustainedfire. holes keep weightdownandensure plentyof aircirculation tokeep installed intherightlocations after temporaryremoval. Large vent phanumeric slotmarkingshelpyoumake sure accessoriesgetre side railallowsclearancefor side-folding stock.White,etchedal bottom railhascutouttoaccommodate under-folding stock,and accessories. Top railwon’tinterfere withuseof originaliron sights; optics, verticalgrips,bipods,quick-detach slingswivels,andother rails up front to provide plenty of space for mounting lights, lasers, securely tothefront barrel trunionandputsfour, MIL-STD 1913 available for theAR-15/M16 platform. Two-piece designclamps arm givesyourAKthesameaccessorymountingflexibilitylong #100-004-241AS Mounting Versatility For Your Tavor Greater Strength, More Accessory Greater Strength,MoreAccessory Drop-in replacement handguard LOWER HANDGUARD RETAINER Aluminum, hardcoat anodized,thread8-32 matteIncludes black. 6061 T6aluminum,hardcoat anodized, matteto varia black. Due Aluminum, anodized finish,matte black.2.2"(5.6cm) high,5.4" MANTICORE ARMS SAMSON MFG.CORP MODEL 1K-RAIL FOREARM VULCAN ARMS ® worn ordinged-uppartonamilitary-style AK-47 or MOE Machined aluminumreplacement for factoryfore Allows Mounting Of A Military AK-47Allows Mounting Of A Military Handguard Lower handguard front retainer cap replaces a ARCLIGHT RAIL 6D184D99 Fully Loaded ARClight Tavor Rail, Lower HandguardRetainer, 1B216B98 AK-47 K-Rail Model1 Forearm, ® polymerrailsegmentsandImpactWeapon

641-623-5401 � On A SaigaSporter � For More Accessory Mounting For More Accessory Plenty Of Forward Rail Space ab AK-47/SAIGA IWI TAVOR - 3 AK-47/AKM / 4 Versatility " (24.8cm) OAL. Fitsmost ​7Z29I34 �

​

ab ​ ab $ 184.99 $ 229.99 � $ 32.99 ------RIFLE STOCKS ------

ab

$ 44.99 $ 289.99 $ 249.99 � 185 ®

​

������������������ 10/22 PAGE ® ​7C239G68 �� ​9E39J40 RUGER Improved Accuracy REMINGTON 700 REMINGTON & Comfort Features For An For Features Comfort & Rigid Composite Construction Construction Composite Rigid Ultra-Stable Shooting Platform Shooting Ultra-Stable " l.o.p. 2.6 lb. (1.2kg) weight. Drop-in Drop-in weight. lb. (1.2kg) 2.6 " l.o.p. Aluminum Bedding Block For Bedding Block Aluminum 4 - / ���������������������������������������������� 3 ab ab FLE STOCK HANDI-RI

Handi-Rifle Stock, Handi-Rifle Rem 700 SA Light Tactical Stock, 700 SA Light Tactical Rem 7C280N06 10/22 Target/Varmint Stk, 10/22 Target/Varmint LIGHT TACTICAL STOCK LIGHT TACTICAL " (75.2cm) long. 13 " (75.2cm) TARGET/VARMINT STOCK TARGET/VARMINT 8 & CARLSON BELL / 5 Light Weight Light BELL & CARLSON CHOATE Composite over machined aluminum block, textured finish, over machined aluminum block, textured Composite Fiberglass/Kevlar composite with textured finish, black. Approxi with composite textured Fiberglass/Kevlar High-impact plastic, matte black. Fits all NEF & H&R Handi- Rifles. High-impact plastic, matte Composite stock with integral bedding block creates a rock sol rock a creates block bedding integral with stock Composite Full-size target-style stock comes fully finished and inletted for for comes fully finished and inletted stock target-style Full-size High-impact plastic stock Adjustable For Precision Adjustable For Shooting; Skeletonized For Skeletonized Shooting; id, custom fit platform that helps produce consistent accuracy from consistent accuracy from produce helps that fit platform custom id, advanced of your Remington 700 short action rifle. A combination and bonded to a machined, alu hand-laid are composite materials stock with strength a high minum pillar bedding block to produce buttstock with J-hook an innovative Features feel. a solid, textured re a and support shoulder increased for off-hand the fit to cutout bottom a 2" wide flat features forearm trigger pull. Beavertail laxed both bipod and sling attachment. sling studs to allow with dual front lugs. front Accepts oversized SPECS: #159-000-004AS design may require minor fitting. Inletted for Ruger 10/22 with factory minor fitting. Inletted for design may require barrel. O.D.) bull (.920" promise accuracy. Withstands temperature extremes, moisture, moisture, extremes, Withstands temperature accuracy. promise grasp. Wide, a non-slip black finish ensures use; textured and hard comfort gives a natural, thumb rest extended pistol grip with deep to aid in quick, tapered is gently able hand position. Wide forend underside for with a flat elevation, position for easy adjustments of comb gives Straight or shooting rest. solid contact with sandbags alignment with optics, while “thumb consistent cheekweld and eye on bags extra stability when shooting hook” on buttstock provides shoulder comfortable secure, ensures buttpad rubber Soft, a rest. or studs to allow both sling stud and dual front contact. Includes rear sling and bipod attachment. SPECS: 29 mately drop-in installation of a heavy barrel Ruger 10/22 action. Provides an Provides action. 10/22 Ruger barrel heavy a of installation drop-in target/ a preciseshooting for platform stable strong, exceptionally construction won’t composite fiberglass/Kevlar varmint rifle. Rigid can com that or action on barrel pressure flex and put uneven #137-000-019AS #137-000-020AS vidual adjustments and a precise fit. One inch, rubber recoil pad rubber recoil fit. One inch, adjustments and a precise vidual is de caliber rifles and shotguns. Stock in large recoil felt softens open sights) not sufficient for use with scope sights (drop signed for light weight. A thumbwheel in the bottom of for and is skeletonized bench shooting. for as an adjustable quicky-rest the stock works SPECS: and forend fits all NEF and H&R and forend rifles, plus 12 and 20 gauge shotguns. Adjustable length- indi spacers allows for of-pull - " - - - - 2 / 1 $ 48.99 $ 289.99 $ 289.99 $ 289.99 $ 289.99 $ 289.99 $ 349.99 ​

® ���� PRICE ab " (35cm). 1" (2.5cm) " (35cm). 1" (2.5cm) 7C281E11 8 7C281N11 7C281G11 7C281Q11 7C281M11 / aluminum bedding 7 10/22 ® ​7C341Q95 MARLIN 60/70/990 MARLIN ab RUGER Pistol Grip & Cheek Rest Grip & Pistol Composite Construction Composite " (31.7cm) to 13 " (31.7cm) 4 Competition Ready; Stable Stable Competition Ready; / 1 Lightweight Polymer Stock Gives Lightweight Polymer FITS MEDALIST™ STOCK MEDALIST™ ��� ������������������������������������������������� Rem. 700 BDL LA Mauser 96 Mauser 98 Rem. 700 BDL SA Wthby Vanguard Marlin 60/70/990 Fiberforce Stock, Marlin 60/70/990 Fiberforce 9A43M00 Odyssey Target Stock, Odyssey Target ab " (3.8cm) comb adjustment. 3 lbs. 5 oz. (1.5 kg) weight. kg) (1.5 3 lbs. 5 oz. adjustment. comb " (3.8cm) 2 ORCE POLYMER STOCK POLYMER FORCE / 1 ODYSSEY TARGET STOCK TARGET ODYSSEY Shooting Comfort Shooting BELL & CARLSON Fiberglass with Kevlar and graphite, black, textured finish. 27 and graphite, black, textured with Kevlar Fiberglass Glass-reinforced polymer, matte black. 26 oz. (737g) wt. Fits Mar black. 26 oz. matte polymer, Glass-reinforced Fiberglass/Kevlar composite. Black, textured finish. 131⁄2" (34cm) 131⁄2" finish. textured Black, composite. Fiberglass/Kevlar FIBER Classic Cheekpiece Improves Cheekpiece Classic Upgraded polymer stock gives your Marlin semi-auto .22 an semi-auto stock gives your Marlin Upgraded polymer STOCK # STOCK Classic, straight line cheekpiece with built-in cast off and cant and off cast built-in with cheekpiece line straight Classic, Greatly improves accuracy by tuning stock fit for shooter com accuracy by tuning stock fit for improves Greatly BELL & CARLSON TECHNOLOGY ADVANCED SPECS: SPECS: fit Model 795. not rifles. Will lin 60/70/990 series semi-auto rimfire ambidextrous Dragunov-style stock with pistol grip and cheek rest grip and cheek rest stock with pistol Dragunov-style ambidextrous Barreled handling and shooting characteristics. to help improve and hanguard in. Ventilated simply drop group action and trigger sessions. cool during extended plinking barrel keep help forearm Features and scratch-resistant. weatherproof is material Synthetic Includes hardware fast, easy sling attachment. two sling studs for and instructions. #019-000-037AS #137-220-096AS #137-220-098AS #137-220-700AS #137-220-701AS #137-000-007AS (70cm) long. LOP Adjustment - 12 Adjustment (70cm) long. LOP SPECS: SPECS: minor fitting. design may require wt. Drop-in 2 lbs. (.91kg) Approx. l.o.p. (SA), Short Action and hinged floorplate. barrel factory sporter Inletted for Howa, (LA) Action Long fits Vanguard, , Win Short (WSM). Mag Weatherby Mauser 96 is inletted for Action. Long and Mossberg Smith & Wesson stepped, military barrels. SPECS: SPECS: black finish, a textured bedding. Features without additional racy, on some models. checkering pad and sling swivels; Pachmayr recoil has a raised, Monte Carlo cheekpiece. Weatherby fort. Vertical grip and high comb place the eye in the proper po grip and high comb place the eye in the proper Vertical fort. Fully eye relief. scope alignment and maximum correct sition for Kevlar/Graphite comb. pull and height at length of adjustable for checker composite construction is stable in all conditions. Molded surface and grasp. Textured gives a sure ing on the grip and forearm Includes stability. enhance benchrest forearm bottom, tapered flat heavy accepts rail; accessory forearm aluminum, pad, rubber recoil diameter. contours up to .920" barrel lowers your head position, creates a tighter cheekweld and shoulder lowers your head position, creates Kevlar Hand-laid fiberglass, recoil. felt to lessen the pain of pocket composites bonded to an integral, ­ and epoxy accu increased consistent, contact for full receiver block ensure drop at comb, + 1 comb, at drop #137-203-300AS - - - - - order on the web ab 94.99 139.99 124.99 $ 129.99 $ 229.99 $ 149.99 ​

brownells.com ��� Long Bottom Bottom Long ����������� ������������ �������������� AK-47/74 ​5K225I13 Accessories Specific Picatinny Specific Picatinny ​5K00GSK Hard-anodized, MIL-STD MIL-STD Hard-anodized, ������������������������������ ​3B119K51 Lets You Install Mission- Install You Lets ​3B133H85 Top Rail Top Long Bottom Rail Short Bottom Rail SCOUT MOUNT SCOUT aluminum Rail Forend has aluminum Rail Forend ������������������������������������������������ ​3B143B42 ab AK-47/74 RAILS AK-47/74 - AK-47 ULTIMAK 10" (25.4cm) long. Rail 10" (25.4cm) Short Bottom ARFX Stock & AKRBC Receiver Block, ARFX Stock & AKRBC Receiver 2Z124G84 AK-47 Multi-Rail Forend, Multi-Rail AK-47 Scout Mount, AK-47 Top Rail, Top Short Bottom Rail, Long Bottom Rail, INDUSTRIES TROY - - Top Rail Top Top Top black finish. matte anodized, T6 6061 aluminum, hardcoat OREND SYSTEM & SYSTEM FOREND MULTI-RAIL replace the factory Bottom Rail replace Rail and Long Bottom Short Machined alumi Add Mounting Rails Rails Mounting Add To Your Kalashnikov Your To #100-008-032AS Scout Mount is Scout and instructions included. Tools AK-47s. factured aluminum and anodized hard one-piece, 6061-T6 constructed of and ac mounting optics for rail 1913 Picatinny a single MIL-STD the to directly attaches and tube gas the replaces Mount cessories. Includes stability and accuracy. steel clamps for with 4140 barrel tools and instructions included. end. Mounting vent holes near front No gunsmithing needed. steel at aluminum with 4140 Forend – Hard-anodized Multi-Rail SPECS: long. Fits stamped, standard- (24.9cm) black. 9.8" matte points, tachment aluminum, 4140 anodized – 6061 T6 hard Scout Mount length receivers. long. Forend and mount (17cm) black. 6.7" clamps, matte steel mounting . separately sold out applying forces to the barrel. Leaves room for bayonet on gas for room Leaves to the barrel. out applying forces cap the factory forend block mounted lugs. Fits over the outside of Chinese manu including length receivers, on stamped, standard MIL-STD 1913 Picatinny rails at 3, 6, and 9 o’clock for mounting and 9 o’clock for 6, 3, rails at 1913 Picatinny MIL-STD tenon system lights, lasers, and other accessories. Expanding rear and has a dual, inside the receiver and self-centers self-squares with to the barrel, the forend locks steel clamp system that floating #100-002-177AS #100-002-178AS – Machined aluminum, hardcoat anodized, matte black. Receiver blocks blocks black. Receiver matte anodized, – Machined aluminum, hardcoat fit stamped sheet metal receivers. sories. factory replaces pro gas tube and bottom with both Troy and is compatible rail, Picatinny of 5" vides rails. use, no-snag for exterior smooth a feature and handguard, lower cooling during extended shooting sessions, vent holes to ease barrel maximum mounting versatil rail segments for and can accept Troy the front rail at integral Picatinny Long Bottom Rail also has 3" of ity. cutout to Bottom rails have end to accept optics and accessories. and variants AK many on found mount sling left-side accommodate with no gunsmithing into both stamped and milled recievers drop All rails sold separately. required. or permanent modification SPECS: long. Rail 5" (12.7cm) long. Rail 13½" (34.2cm) num rails fit onto most onto fit rails num rifles pattern AK-47/74 mounting and provide optics space for and other acces #100-015-592AS #100-015-593AS #100-015-594AS

" " ® - 2 4 / / 1 1 ab ab $ 45.99 ​

$ 159.99 ab

. " (3.8cm) wide " (3.8cm) 2 / 1 ������������������������� Code Title 18 . Code .S STAR RAIL STAR Control & Appearance & Control AK-47/74 800-741-0015 Options; Improves Weapon Improves Weapon Options; Snap-on replacement for factory for Snap-on replacement ​1B151C58 " (8.9cm) high with top rail installed. " (8.9cm) 2

/ Increases Accessory-Mounting 1 - handguard solves two common AK handguard much-needed by providing problems ������������������������������������������������������ SIG 522 SIG AK-47 TAPCO LTD. ACE Intrafuse Quad Rail Handguard, Black, Intrafuse 5A43F11 Star 522 Rail, " (5.56cm) wide. 17.7oz. (.5kg) wt. Fits SIG 522 only. (.5kg) wide. 17.7oz. " (5.56cm) 16 / 3 AKFX MODULAR STOCK SAMSON Reinforced injection-molded polymer composite, black. 6 black. injection-molded polymer composite, Reinforced

6061 T6 aluminum, anodized matte black. 10" (25.4cm) long, 2¾" black. 10" matte (25.4cm) 6061 T6 aluminum, anodized Versatility For Your SIG Your For Versatility Machined aluminum hand aluminum Machined Bolt-on Bolt-on

Fixed Stock Fixed USE QUAD RAIL HANDGUARD INTRAFUSE QUAD Skeletonized Skeletonized Light, Strong, Light, AR-15 Style Accessory Style Mounting AR-15 (15.9cm) OAL, 2" (5.1cm) wide with side rails installed, 1 2" (5.1cm) OAL, (15.9cm)

8.7 oz. (247g) wt. (247g) oz. 8.7 Orders/Tech: SPECS: SPECS: tional flexibility in mounting lights, lasers, vertical grips, bipods, and tional flexibility in mounting lights, lasers, vertical grips, bipods, when they’re and side rails can be removed Top other tactical gear. bottom rail not needed, and a sliding panel conceals the integral support hand. Molded-in grasping the when it’s not in use to protect superb hand-hold for a secure surface ensure ridges and a textured acquisition and fast follow- aids in quick target that weapon control to help cool the up shots. Slots in the upper half allow air circulation shield and extra-thick handguard while an internal aluminum barrel, as one compliance Counts heat. barrel the hand from walls protect U Section 922(r) of part for purposes of (6.99cm) high, 2 (6.99cm) SPECS: SPECS: guard has four MIL-STD 1913 rails 1913 MIL-STD four has guard Picatinny accept standard that expand greatly accessories to options. your 522's accessory the rails to reduce been machined between holes have Venting rail is system while firing. The top the from heat weight and vent rail the receiver sight with of a continuous line 9" long and forms design is easy Two-piece sights. iron backup optics or attaching for to the rifle. no permanent modifications to install and requires without side rails, approximately 3 without side rails, approximately rail space for accessories and improving the weapon’s appearance accessories and improving rail space for Picatinny wood handguard. a dinged and scratched by replacing excep and 12 o’clock positions give the operator 9, 6, the 3, rails at #100-004-130AS #100-006-255AS OAL. Rubber recoil pad included. Receiver Blocks & Folding Mechanisms Blocks pad included. Receiver Rubber recoil OAL. AKFX Stock – Machined aluminum and Delrin, matte black. 8 AKFX Stock – Machined aluminum and Delrin, matte SPECS: components components let you install stamped-receiver stock on your skeletonized a lightweight fixed, and light, with strong The AKFX stock is exceptionally Kalashnikov. machined aluminum and and bottom tube of cap, buttplate, front Delrin the super-strong the top bar and center brace turned from polymer. Comes with a removable rubber recoil pad. Stock comes pad. Stock recoil rubber a removable with Comes polymer. most fits flush with the back of block that wtih the AKRBC receiver the tang requires Installation receivers. stamped 1mm and 1.6mm block and filed smooth. The to be cut off the receiver on the back of in place by the held securely then simply bolts into the receiver, pistol grip “T” places to allow the stock nut. Drilled and tapped in two optics. with use for or higher position be mounted in standard to STOCKS RIFLE #393-000-003AS #100-011-318AS #393-000-016AS barrels upto1.250"indiameter. Available inBlackorSand. stable onbags;barrel channelisrelieved for straightcontour, heavy rides easilyonarear sandbag.Easy-to-grasp,wide, flat forend is from prone, off thebenchorbipod.Slighttaperalongbottomof butt natural, relaxed wrist angle for excellent trigger control when firing with no additionalbedding.Thehandfilling, vertical grip allows a due tochangesintemperature orhumidity;givessuperioraccuracy swivel mountintothepistolgrip.Provides for azero that nevershifts a machinedaluminumbeddingblockthat extends from thefront Sand (S),baked-on, non-reflective, textured finish.13 SPECS: Fully collapsed: 24½" (62cm)long. 1lbs3oz. (559g)wt. SPECS: weather. FitsRuger10/22only. Includesinstructions. front andrear sling studs.Polymerconstructionisimperviousto gives proper finger position for precise trigger control. Stock has nel free-floats allbarrel diameters. Pistolgripenhancescomfort and ers of anysize. Barreled actionsimplydrops intostock.Barrel chan justments that changelengthof pullfrom 11¼"to15¼"fitshoot lb. (1.4 kg) wt.FitsRemington700 BDL shortactiononly. #137-000-016AS wide flat bottomwith 7 and hingedfloorplate. lb. (2.5kg) weight. FitsRem700shortactionswithfactoryheavybarrel adjustable front-to-rear. creates a rock solid, custom fit platform that helps produce consis Pachmayr buttpadisadjustablefor left/right“cant”, 1 black. Approx. 32"(81cm)long,2 SPECS: 1 strength stockwitha solid, textured feel. Cheek piece provides up to to amachined,aluminumpillarbeddingblockproduce ahigh nation of advancedcompositematerials are hand-laidandbonded tent accuracyfrom yourRemington700shortactionrifle.Acombi pull, plus 5 VERTICAL GRIP LONG RANGE STOCK / 8 " verticaladjustmentfor precise eyealignmentwithyourscope. Right- & Left-Handed Shooters Lightweight reinforced polymer stock features 6 position ad Strong, stable,Kevlar™/graphite-reinforced, fiberglass shellhas Fully adjustable,compositestockwithintegralbeddingblock Adjustable Stock Fits All Shooters Completely Ambidextrous For Fiberglassreinforced Kevlar with andgraphite,Flat Black(B) or Polymer,long. Fullymatte(72cm) finish. 28½" black extended:

Composite over machined aluminum block, texturedaluminum Compositemachined over finish, BELL &CARLSON VARMINT/TACTICAL STOCK & Free-Floats All Barrels H-S PRECISION 3 / 4 " upand2 AXIOM ADJUSTABLE STOCK RUGERBLACKHAWK Vertical GripLongRangeStock,S, 3C394N35 Vertical GripLongRangeStock,B, 10/22 AxiomAdj.Stock, 3C394I35 Rem 700SAV/TStock, 7 1 / / 8 2 " down.Beavertail forearm features a2 " long,dovetailedrailandswivelstudthat’s ab Adjustable With Aluminum Bedding � � � 3 Block For Improved Accuracy / 8 " (5.8cm) wide,6 REMINGTON 700 PAGE REMINGTON 700

​7C527D99 186 ​7K69I99 1 ® / 1 10/22 2 / " (16.5cm) high.5.4 2 " (34.3cm) l.o.p., 3 3 / 4 �

" length-of-

� ​ ​ � ® $ 549.99 $ 399.99 ab $ 69.99 399.99 3 / 8 - - - - - " stock-to-action fit;barrel channelisfree floating. Buttpadisadjust a quick detach bipod adapter. Aluminum blocks give a rock solid keeps riflesteadywhenshootingoff bags. Accessory railincludes forearm improves strength withoutexcess weight.Serrated bottom accuracy andusability. Full-length aluminuminsertmoldedintothe SPECS: position. able for length-of-pull; cheekpieceadjustsfor height,fore andaft front andrear handguards. style contoursandcomesasathree-piece set with buttstock,plus life intoyourvintageGarand.Features theoversized, Korean War may require minorfitting. Inlet (UFVI)-Roughsandedandmachinedbutnot fittoin-houseaction; house actionfor drop-in installation, militaryoilfinish.Unfinished/Virtual SPECS: SPECS: older parts. Modelsavailable for AK-47s withstandard Stampedreceiver, storage compartmentfor acleaningkit,more batteries, orspare aluminum orpolymerreceiver extensionwithwatertight internal with allthehardware necessarytoconvertyourrifle,includingan bidextrous receptacles for push-buttontypeslingswivels.Kitcomes lease lever, pre-mounted lowerslingswivel,andfront andrear am (600g) weight. Includesbuttstock,receiver extension,andhexkey. buttpad for increased comfort. Includesaneasy-to-operate re rugged, long-lastingfiber-filled plasticcompositewitharubber carry withtheconvenientPicatinny-style accessoryrail.Madefrom Plus, thestoragelidisinterchangeable for eitherright-orleft-side for uptofour CR-123 batteries inthesnap-latch sidecompartment. of lengthadjustment.Uniquedesignincorporates secure storage #239-000-012AS #239-000-013AS #100-015-016AS #100-014-999AS #100-003-351AS #100-003-393AS CHOATE Innovative syntheticstockwithdesignfeatures that enhance STOCK # High-quality, Americanwalnutreplacement stockbreathes new STOCK # Milled receiver, orUnder Foldingreceiver. Dupont Rynite SST-35, black.Approx. 4lb.,7 oz. (2kg) weight, Fiber-filled polymercomposite, black.7 American walnut.Finished(F)-100%fitandsandedtoanin- ab COLLAPSIBLE BUTTSTOCK COLLAPSIBLE REPLACEMENT STOCKSET REPLACEMENT COMMAND ARMS ULTIMATE VARMINT STOCK FITS RECEIVER BOYDS’ M1 Garand3-Pc Set M1 Garand3-Pc Set Under Folding Milled Milled Stamped Enhances The Look & Performance Of SATISFACTION GUARANTEED FITS Versatile Platform For Long Range ab Your Classic Garand M1 GARAND Varmint Shooting Polymer Aluminum Aluminum Aluminum tion stockthat allowsupto4" updated, M4-stylesix-posi stock onyourAK-47 withthis TUBE Storage & Accessory Rail Storage & Accessory M4-Style ButtstockWith SINCE 1939 TYPE Replace thefactorybutt F UFVI Convenient Battery Convenient Battery AK-47 1 / 2 " (19cm)long.21.2oz. 6C100Q75 6C120C65 9C166B85 6C100L75 9C120A34 6C67D36 PRICE PRICE $ 162.00 $ 124.99 $ $ 135.50 $ 135.50 $ 179.99 90.00 - - - - - SPECS: and rear sling loop. piece. sling loops.Savage 110 isaclassic-style stock withraisedcheek stock includeshandguard, triggerguard springandnon-detachable mum drop at comb,slingstuds,gripcapandrubberbuttpad.SKS an excellent grip,eveninwetweather. Drop-in installation, mini changes inhumidityortemperature. Textured, matte finishprovides (35cm) lop, #159-040-000AS #159-140-000AS #159-110-000AS 35" (89cm) long. Anschutz-type rail. Furnishedrail. Anschutz-type with long. (89cm) 35" stock SpacerPak- hole spacing. hole spacingbefore ordering shortactionmodelswith4.275" or4.411" will accept Accu-Trigger action.Measurecenter-to-center actionscrew #159-000-029AS #159-225-110AS #159-225-701AS #159-225-702AS #159-221-100AS — Advise# #159-221-100AS — Advise# #159-220-301AS #159-220-602AS #159-220-601AS #159-220-111AS #159-220-109AS usability. Lengthof pull,cheekpieceandbuttplate are fullyadjust Furnished with convertrequire guntoablind magazine; triggerguard withoutfloorplate. rail. Rem.ADL/BDLandWin.M-70models (89cm) long.Anschutz-type SPECS: versatile platform for accurate, longrangeshooting. position, flushmountswivelstudsandotherfeatures create astable, rated flat bottomforend; textured andcontoured forend grip;dual bedding required. Accessoryrail/bipodmount;forward angled,ser ding blocks giveasolidstocktoactionfitwithlittlenoadditional able permittingaclose,personalized fit.Molded-inaluminumbed buttstock spacers. STOCK # Tough, lightweight,DuPontRynite Hi-tech, skeletonized, pistolgripdesignenhancesaccuracyand STOCK # Mini-14/30 fitsbothriflesandincludesaraisedcheekpiece DuPontSST-35, Rynite OD green.lb., 14 5 oz. (2.7 kg) weight, 35" Molded Rynite,black,textured finish.30"(76cm)long,13 Fully Adjustable; Innovative, Drop-inDesign 3 SYNTHETIC RIFLE STOCK / 4 " (19mm)drop at comb. Right-hand only 1 / ULTIMATE SNIPERSTOCK 2 Ultimate Varmint Stock,9E189B40 Green Target Stock,9E189K40 " spacer only. ButtstockSpacerPak- Savage 110Stock, SKS Stock, Mini-14/30 Stock, Buttstock SpacerPak, Buttstock SpacerPak, 1 / ab 4 ", 1 / 2 ", and Centerfeed (4.411" holespacing) Savage Late ModelShortAction Savage 110Long/ShortAction Rem 700ADL/BDLLongAction Rem 700ADL/BDLShortAction CHOATE Rem 700ADL/BDLShortAction Win M-70 LongAction Savage 10, 11,12ShortAction Savage 110Long/ShortAction Rem 700ADL/BDLLongAction 3 Impervious ToImpervious Wear; For Savage ​9E56G73 / CHOATE 4 " buttstockspacers. Savage models 110, SKS & Mini-14/30 ® , iscompletelyunaffected by ​9E91N40 ​9E56F73 FITS FITS � ​9E10F64 ​9E10F64 1 / � � 2 � " spacer" only. � � � ab 1 / 4 ",

1 / 2 $ $ $ 199.99 $ 199.99 ", and $ 63.99 99.99 62.99 Office/Tech: 12.99 12.99 Butt 5 3 / / 8 - - 4 - - - - " " 100-018-084AS #100-016-587AS #100-016-588AS #100-016-591AS #100-016-589AS #100-016-590AS buttstock bringstheingenu Earth SPECS: Also fitsMOESLandZhukov-S stocks. that adds½"tothelengthof pullandevenmore recoil absorption. hanced Recoil Padisadirect replacement for thestock's original mates thecolorof certainEasternEuropean woodAKstocks. En Available instandard Magpulcolors,plusa“Plum” huethat approxi on CheekRisers(soldseparately) for atrue,personalcustomfit. able, positiveshoulderplacement.Acceptsuser-selectable snap- placement, andashockabsorbingrubberrecoil padfor comfort MOE AK Stock provides internal storage, optimized QD sling swivel unique wedgeblockfittingsystemof Magpul’s Zhukov-S Stock, the Fixed stockisoptimized for stamped-receiver rifles.Featuring the pul’s MOEAR-15 accessorysystemtothevenerableAKplatform. ity and ergonomics of Mag recoil padand1"slingswivelloops. the ultimate instabilityandstrength. Allmodelsinclude1"rubber oz.(632g) wt.FitsmilitaryissueM1Carbineonly. SPECS: no fitting required. Made from lightweight DuPont Zytel creased shootingcomfort andabetterfit.Drop-in designmeans issue stockgivesin than thefactoryor ger length-of-pull rifle stocks. than conventional M1 CARBINEFIXEDSTOCK -Faster handlingandfasterpointing military issueonly. Ruger SPECS: and 1"recoil pad.Drop-in designrequires nofitting. All models include integral 1" swivels for mounting tactical slings shooting. Closesbypushingdetentrelease buttononthehinge. easily andlocks intoplacefor sturdy supportfor conventional trol. Steel hingehousingandarmstanduptorugged use.Opens maneuverability isnecessary. Pistolgripprovides increased con ter situations where Ideal for close-quar compact storage. mum portabilityand the way for maxi tic stockfolds outof FOLDING PISTOL GRIPSTOCK -Lightweight,DuPontZytel #159-250-031AS #159-300-022AS #159-300-030AS Brings Magpul Stock Molded hard polymer Ergonomics To The (FDE), O.D. Green (ODG),Stealth Gray(Gray), andPlum. Reinforced, injection-moldedhard polymer, Black(Blk),Flat Dark Zytel, black.29"(73cm)longopen,19.5" (49.5cm) folded. M1fits Zytel plastic,black,textured finish.29"(73cm)long,1lb.6 AK Platform Item 3 / 4 " lon PISTOL GRIP STOCK Pad, MOE-SL/AK/Zhukov EnhancedRecoil AK-47/74 MOEStock,Plum, AK-47/74 MOEStock,Gray, AK-47/74 MOEStock,ODG, AK-47/74 MOEStock,FDE, AK-47/74 MOEStock,Blk, M1 CarbineGripStock, 10/22 FoldingStock, M1 CarbineFoldingStk, - - - -

® 641-623-5401 10/22 ​3K15E37 Magpul AK-47/74

MOE AKSTOCK CHOATE - - ® includeshandguard. � � Increases GripAreaFor More ab Accurate Shooting ​9E94G53 ​9E66F19 ​9E94C53 ​3K54L06 ​3K54B06 ​3K54E06 � ​3K54E06 � ​3K54E06 � � � ab � ® � plastic for � � � � $ 56.95 $ 74.00 $ 99.99 ® 18.99 56.95 56.95 56.95 56.95 99.99 plas - - - - - RIFLE STOCKS - - - - $ 76.99 $ 74.99 $ 74.99 $ 93.99 $ 93.99 $ 369.99

187 PRICE ®

​

8K81K24 8K66B19 8K66E46 8K81H24 8K66C19 PAGE 10/22 ® Rubber Rubber Rubber Nylon Rubber Non-Slip Comfort Non-Slip MATERIAL Over A Fiberglass Shell Fiberglass A Over REMINGTON 700 REMINGTON " (2.8cm) drop at heel. 1.9 lb. (879 g) heel. 1.9 at drop " (2.8cm) Kevlar/Graphite Construction Kevlar/Graphite 4 / Thumbhole Comfort With Stable 1 S/B S/B B/B B/B B/B ������������������������������������������������ FITS RUGER HOGUE

Ghillie Black Black Black Ghillie LA Pro-Series Thumbhole Stock, LA Pro-Series 3C361Q95 COLOR " (35cm) LOP, 1 " (35cm) LOP, 4 / 3 ab FLE STOCK RI OVERMOLDED™ L? DEA a for Looking Color PRECISION H-S " (34.2cm) lop, 1" (2.5cm) drop at comb. Fits Rem 700 BDL comb. at drop lop, 1" (2.5cm) " (34.2cm) 2 / Fiberglass, Kevlar/graphite, black textured finished. 31" (78cm) black textured Kevlar/graphite, Fiberglass, 1 . Straight comb, wide, varmint-style forend with fin wide, varmint-style forend comb, (B/B). Straight Fiberglass with rubber or Nylon covering, black or Ghillie Tan. 29" black or Ghillie Tan. covering, with rubber or Nylon Fiberglass PRO-SERIES THUMBHOLE STOCK PRO-SERIES Precision machined, aluminum bedding block bonded to a machined, aluminum Precision STOCK # STOCK Cushioned outer skin of rubber or Nylon provides non-slip non-slip rubber or Nylon provides Cushioned outer skin of Go online and click on our SALE page banner!! tion in an incredibly stable bed so your zero never varies. Strong, never varies. Strong, so your zero stable bed tion in an incredibly shell withstands fiberglass Kevlar/graphite, rigid, hand-laminated, in changes by caused shifting or warping to impervious abuse; a hand at Thumbhole design positions the or humidity. weather BDL short action for Models available angle to the trigger. natural forend width, tapered Standard and long action, right-hand only. with mi barrels diameter with single swivel stud. Can accept larger nor inletting. SPECS: long. 13 long action, right-hand only. Includes recoil pad, sling studs, and receiver pad, sling studs, and receiver Includes recoil only. long action, right-hand screws. structural polyurethane core holds your barreled Rem 700 long ac holds your barreled core structural polyurethane #393-100-750AS #408-220-000AS #408-220-100AS #408-221-100AS 408-000-123AS 408-000-124AS or nominal .920" diameter bull diameter (S/B) or nominal .920" barrels ther factory standard barrels dual palm on grip and forend, cobblestone finish plus ger grooves, to this stock as comfortable pistol grip make and recurve swells and pad, and front rubber recoil shoot as it is practical. Includes sling studs. rear SPECS: (73cm) long. 13 wt. Fits 10/22 .22 LR only. shooting comfort; internal fiberglass body gives solid support, light body internal fiberglass shooting comfort; fit; with ei drop-in a for weight and easy carrying. Fully-inletted " - - - 2 / 1 599.99 349.99 $ 127.80 $ 359.99 $ 349.99 ​ lb. (1.6 kg) wt. kg) lb. (1.6 ����� ������� 2

/ ​ 1

Kalashnikov ab Reinforced polymer Reinforced ​3C343E90 � Improves Comfort & ​3C348B63 2B109Q61 Convenience Of Your Convenience Of Your folding stock bolts onto folding " (36cm) LOP. 3 " (36cm) LOP. 2 AK-47/74 REMINGTON 700 REMINGTON / 1 " (34cm) length-of-pull. 3 lb. (1.4 kg) kg) (1.4 3 lb. " (34cm) length-of-pull. 2 / REMINGTON 700 REMINGTON 1 ab For Building Precision Rifles Precision Building For ��������������������������������������������� For The Ultimate In Stability Ultimate The For ����������������������������������������������� " (31cm) to 14 Full-Length, Aluminum Bedding Block Bedding Aluminum Full-Length, 2 / 1 FLE STOCK POLICE RI FOLDING STOCK Police Rifle Stock, Sand, Police Rifle Stock, Blk, 3C343Q90 3C575H80 Adj. Rem 700 LA Tactical Stock, 700 LAAdj. Rem Tactical Stock, 700 LA Rem Fixed Tactical AK-47/74 Folding Stk, AK-47/74 GROUP MAKO PRECISION H-S FLE STOCK RI TACTICAL PRECISION H-S Kevlar/graphite-reinforced fiberglass. Flat black or sand. 13 black Flat fiberglass. Kevlar/graphite-reinforced Reinforced polymer, matte black. Length extended: 12" (30cm). black. Length matte polymer, Reinforced Kevlar/graphite-reinforced fiberglass, matte black. Includes sling matte fiberglass, Kevlar/graphite-reinforced Same stock as used by the U.S. Army. Exclusive, molded-in, Exclusive, Army. the U.S. by stock as used Same Kevlar/graphite-reinforced, fiberglass stock gives complete stock fiberglass Kevlar/graphite-reinforced, Adjustable - (Adj.) - 12 #393-000-018AS #393-100-705AS (34.2cm) LOP, minimum drop at heel, 2 lb. 12 oz. (1.3 kg) wt. Includes kg) (1.3 12 oz. heel, 2 lb. at minimum drop LOP, (34.2cm) 700 BDL short pad. Fits Remington sling and tripod stud, and rubber recoil only. action, heavy barrel SPECS: SPECS: tenance. Made from Kevlar/graphite-reinforced fiberglass, bonded fiberglass, Kevlar/graphite-reinforced tenance. Made from complete and weight lightest for foam polyurethane structural to Extra- humidity. or temperature in changes of regardless stability, help promote and double palmswells in the grip area wide forend consistent accuracy when it’s hold for comfortable more a tighter, in black or sand color. needed most. Available machined, aluminum bedding block gives a true “drop-in” fit on machined, aluminum bedding block gives a true “drop-in” main no initial fitting or later the 700 BDL action, and it requires wt. ference with charging handle operation. handle operation. with charging ference SPECS: 4½" collapsed with cheekpiece Height 2¼" (5.7cm). folded Length (465g) 1 lb. 4 oz. extended 6½" (16.5cm). with cheekpiece Height (11.4cm). receivers. wt. Fits stamped Kalashnikov cepts straight-tapered barrels. barrels. cepts straight-tapered SPECS: Fits Remington instructions. pad and complete and tripod studs, recoil - 13 Fixed Action only. 700 BDL Long stability in all climates. Machined aluminum bedding block runs aluminum bedding block Machined climates. stability in all and area action and forearm the through studs, sling front the from fit that no-bedding-required a drop-in, the tang for extends 5" past Adjustable stability. rifle stock rigidity and in ultimate guarantees the channel ac pull. Barrel easy-to-change length of model features stamped receiver rear trunnion. Locking button on right side gives rear stamped receiver 5-position adjustable cheekpiece operation. fast and easy folding optics use and collapses instantly for height for helps find perfect and gives rubber buttpad cushions recoil sight use. Generous iron with stock Rifle may be fired grips shoulder. no-slip surface that inter needs to be fully collapsed to prevent but cheekpiece folded, #393-100-721AS #393-100-711AS #100-008-055AS - - - order on the web " (34 2 / 1 99.99 $ 99.99 $ 89.99 " (35cm) 8 $ 329.99 / 7 FITS brownells.com ������� ����������� ������������ Rem. 700 BDL, SA Rem. 700 BDL, LA LA Win.70 ������������ ab

​9E92Q27 ​9E92M27 Scope Use Scope ​9E83P53 " (76cm) long, 13 4 " (77cm) long. 14" (35.5cm) to (35.5cm) " (77cm) long. 14" / 2 1 / 1 STOCK # STOCK #409-100-700AS #409-100-701AS #409-100-071AS Designed For Comfortable ab -

SKS CHOATE FITS fold SKS Dragunov Stock, Cont. Side Fold Stock, Encore Side Fold Stock, ® OLD STOCK FOLD SIDE HIGH TECH SPECIALTIES FLES RI & ENCORE CONTENDER T/C Mauser M-98 Rem. 700 ADL, SA Rem. 700 ADL, LA Synthetic Rifle Stock, 9K309D87 ab FLE STOCK SYNTHETIC RI Pack Gun Pack DRAGUNOV POLYMER STOCK POLYMER DRAGUNOV Fiberglass-covered foam, gray. 30 gray. foam, Fiberglass-covered 4140 steel and DuPont Zytel fiberglass-reinforced nylon, black. fiberglass-reinforced Zytel steel and DuPont 4140 Polymer, black, textured finish. 30 black, textured Polymer, , Long action (LA)(SA), Long . Superb Strength & Durability Superb Strength Lightweight, stable stocks, made in the classic style, ready to ready the classic style, made in Lightweight, stable stocks, STOCK # STOCK One-piece stock made from fiberglass-filled polymer never fiberglass-filled One-piece stock made from Tough Zytel Tough Makes The Perfect The Makes Ultra-Lightweight, Only 20 Oz.; Only Ultra-Lightweight, Strong & Compact; Compact; & Strong CHOATE l.o.p. without pad, 1" (2.5cm) drop at comb, 20.3 oz. (556 g) wt. oz. Includes 20.3 comb, at drop without pad, 1" (2.5cm) l.o.p. Short sling swivel studs. Rem 700 BDL model includes raised cheekpiece. action ered with up to 7 layers of fiberglass and epoxy composite, makes composite, makes and epoxy fiberglass with up to 7 layers of ered weight. Fully without excessive unbelievably strong these stocks a smooth, gray finish; with inletted, (glass bedding recommended) will accept up to a #4 bar Forearm to lightly sand and paint. ready contour. rel SPECS: bed and finish. Structural, injection-molded, urethane foam cov foam urethane injection-molded, bed and finish. Structural, — Advise # — #409-000-003AS #409-000-002AS #409-100-098AS #159-040-100AS 13" (33cm) LOP. 2 lb. 7 oz. (1.1 kg) wt. (1.1 kg) 2 lb. 7 oz. 13" (33cm) LOP. cm) LOP. cm) LOP. cally indestructible. A high cheekpiece and zero drop at comb gives at drop cally indestructible. A high cheekpiece and zero to up for spacers scopes; mounted receiver with alignment proper 1" sling swivel studs. Comes with 1" adjustment to length-of-pull. Little or no fitting required. SPECS: SPECS: SPECS: wt. 13 kg) lb. (.86 wt. 1.9 Encore - kg) lb. (.82 - 1.8 Contender ing stock makes your T/C your makes stock ing unit. compact a into rifle “sloppy” fit locking hinge eliminate one-piece mount and Steel, pivoting steady, hold you helps grip pistol Contoured rattles. and pad shooting position. 1", rubber into the securely buttstock locks tang, plus grip and loops at includes sling Contender absorbs recoil. an uncheckered Encore features non-slip pistol grip; a checkered, regulations tang. All BATFE the grip and a single sling loop at pistol stocks. these using when with complied be must changes dimensions due to weather or humidity, plus it’s practi or humidity, changes dimensions due to weather #159-000-023AS #159-000-022AS " - - - - - 2 / 1 ab

669.99 669.99 $ 359.99 $ 359.99 $ 359.99 $ 359.99 $ 359.99 $ 359.99 $ 359.99 $ 359.99 $ 359.99 $ 359.99 $ 359.99 $ 359.99 $ 669.99 PRICE PRICE

Sand (S) baked- " (31cm) to 14 2 / 1 3C353F52 3C353F52 3C353F52 3C353J52 3C353E52 3C353P52 3C353K52 3C353K52 3C353A52 3C353H52 3C353Q52 3C353Q52 /Graphite Stocks With /Graphite Stocks ® ������������������������� ��������������������������� ������������������������������������� Left-Handed Shooters Left-Handed 800-741-0015 REMINGTON 700 REMINGTON

Fully Adjustable For Right- & Right- For Adjustable Fully SAND ​3C666H06 ​3C666P06 FITS FITS " (34.2cm) “pull”, 1" (2.5cm) drop at comb. comb. at drop “pull”, 1" (2.5cm) " (34.2cm) ab 2 H-S PRECISION H-S / 1 Drop-In, Kevlar Drop-In, ​3C661J57 MATTE BLACKMATTE *Rem. 700 BDL Long Rem. 700 BDL Short Long Rem. 700 Varmint Rem. 700 Varmint Short Rem. 700 Varmint *Rem. 700 BDL Long, LH Rem. 700 ADL Long Rem. 700 ADL Short *Rem. 700 BDL Long **Rem. 700 BDL Long Rem. 700 BDL Short Long Rem. 700 Varmint Short Rem. 700 Varmint Flat Black, Flat Short Action V/G Tactical Stock, Short Action V/G Tactical Stock, Long Action V/G Tactical Stock, Short Action V/G Tactical Sand, Flat Black, Flat Aluminum Bedding Block Require No Bedding No Require Block Bedding Aluminum FLE STOCK RI PRO-SERIES

PRECISION H-S

** = Classic model, includes cheekpiece. Flat Black (B) or Flat stock. target-style Oversize,

Laminated Kevlar/fiberglass, matte black or sand, with 7075 T6 matte Kevlar/fiberglass, Laminated STOCK # STOCK STOCK # STOCK Designed for police departments and law enforcement agen police departments and law enforcement Designed for Machined aluminum insert, bonded to lightweight, durable, insert, bonded to Machined aluminum

FLE STOCK RI TACTICAL VERTICAL GRIP (36cm) lop, 0" to +2" (5cm) rise at comb. 4 lb. 3 oz. (1.9 kg) wt. Fits Rem kg) (1.9 4 lb. 3 oz. comb. (36cm) lop, 0" to +2" (5cm) rise at ington 700 BDL Short (right hand) and Long actions only. hand) and Long BDL Short (right ington 700 SPECS: SPECS: ity. Barrel channel is relieved for straight contour, bull-style, heavy bull-style, heavy straight contour, for channel is relieved Barrel ity. Black or Sand. in Flat Available up to 1.250" in diameter. barrels lar/graphite-reinforced fiberglass provides stability and strength for for stability and strength provides fiberglass lar/graphite-reinforced or humid never shifts due to changes in temperature that a zero cies. Stock is instantly and fully adjustable (no tools required) for for (no tools required) is instantly and fully adjustable cies. Stock comb. Plus, the handfilling, vertical grip at pull and drop length of both right- and for ambidextrous and adjustable cheekpiece are block runs left-handed shooters. Machined aluminum bedding pistol the into back, way the all mount swivel front the near from Kev superior accuracy. grip so no additional bedding is needed for #393-100-731AS #393-000-017AS on, non-reflective, textured finish. Adjustable from 12 finish. Adjustable from textured on, non-reflective,

#393-100-730AS Orders/Tech: #393-100-700AS #393-100-703AS #393-100-702AS #393-100-704AS #393-000-014AS #393-100-740AS #393-100-701AS #393-100-741AS #393-000-024AS #393-000-027AS #393-000-028AS #393-000-022AS SPECS: SPECS: aluminum bedding block. 13 nates additional bedding and assures a perfect fit of the barreled the barreled fit of a perfect assures additional bedding and nates cloth with woven Kevlar/fiberglass using laminated action. Hand so the and rigidity, strength for carbon fiber particles uni-directional, polyurethane baked-on, non-reflective, never varies. Textured, zero handling. and rough conditions weather finish stands up to extreme black or sand base color in matte Available Can ’glas bed if desired. web. with white and brown fiberglass-reinforced, structural polyurethane foam, virtually elimi virtually foam, polyurethane structural fiberglass-reinforced, Includes rubber buttpad, sling studs, and instructions. LH indicates studs, and instructions. LH indicates Includes rubber buttpad, sling magnum actions w/minor fitting to barrel lefthand model. * = Accepts channel. STOCKS RIFLE M70-pattern rifles.Willnot fitstandard AK/AKM-pattern guns. the trunnion’s tang.Yugo fitsstamped-receiver, fixed-stock Yugoslavian notcompatible NorincoTypethe with differencesto due 56S/MAK-90 in tolerancesrequired.rifles, minorfittingmaybe typicalin these AK-47/74 tion adjustablein.65" increments. 15.1 oz. wt.Duetothewiderangeof 11.4" OAL. LOP: approx. 12"(collapsed), approx. 15"(extended).5-posi Earth SPECS: absorption. AlsofitsMOE-SL andMOEAKstocks. original that adds½"tothelengthof pullandevenmore recoil swivels (soldseparately). loop onbottom.AcceptsMagpulType 1andType 2pushbuttonQD mounting: socket onleftsidefor pushbuttonQDswivel;1.25"sling recoil padoffers ananti-slipsurfaceanddampensfelt recoil. Sling to customize for correct headalignmentwithoptics.Rubber profile withusercomfort; snaponCheekRisersavailable separately kweld inallpositions.Cheekweldisengineered tocombineaslim ment lever, for asolid“fixed stock”lockup withconsistentchee ly 12"to15"in.65" increments, withlow-profile, anti-snagadjust mounted optics. Rifle may be charged and fired while stock is folded. allows stock to fold to the right side for compatibility with side- rattle-free stockfit.Rugged,wear-compensating lockmechanism without modification viaauniquewedgeblockthat givesasolid, most stamped receivers with fixed-stock, single-tang trunnion comfort withandcontrol of theKalashnikov platform. Mountsto mise, full-featured tacticalfolding stockthat redefines theshooter’s bullpup stockre ergonomical releases andallowfor fastermanipulation. Kitcomeswith adummy An extendedmagazineandautomatic boltrelease replace factory to beoperated, plusanadditionalsafety selectornearthetrigger. ergy. Stock includesasafety extensiontoallowthefactorysafety melonite treated steelfor aconsistentandefficienttransfer of en for cyclingthefactory bolt.Built-inHTA trigger linkage ismadeof minum beddingblock,andanambidextrous steel charging handle stock features amachinedaluminum Picatinny opticsrail,analu verability andbalance.Madeof durable,militarygradepolymer, length of yourRuger10/22tojust26½",givingitsuperiormaneu duces theoverall 100-018-084AS 100-018-056AS #100-016-596AS #100-016-597AS #100-016-641AS #100-016-598AS #100-016-640AS 10/22 By Over Shortens Your 10 Inches Enhanced Recoil Padisadirect replacement for thestock's Offers 5-positionlength-of-pull adjustmentfrom approximate Compact, HIGH TOWER ARMORY (FDE), O.D. Green (ODG),Stealth Gray(Gray), andPlum.8.8" to Reinforced, injection-moldedhard polymer, Black(Blk),Flat Dark

Items 90/22 BULLPUPSTOCK - Pad, MOE-SL/AK/Zhukov EnhancedRecoil Yugo Zhukov-S Stock,Blk, Plum, AK-47/74 Zhukov-S Stock, Gray, AK-47/74 Zhukov-S Stock, ODG, AK-47/74 Zhukov-S Stock, FDE, AK-47/74 Zhukov-S Stock, Blk, AK-47/74 Zhukov-S Stock, Zhukov 3K90A11 ​3K15E37 3K90G11 Magpul AK-47/74 3K90E11 3K90F11 3K90I11 � � � � � PAGE � kov-S Stock isano-compro MOE AK/AKM stock, the Zhu ments offered byMagpul’s -S Stock RUGER Expanding theenhance “No-Compromise”

Tactical Folder 188 Full-Featured 3K90N11 ® ab 10/22 � ® $ 94.95

94.95 94.95 94.95 94.95 94.95 18.99

------#100-015-471AS — Advise# — Advise# #408-050-021AS #408-050-020AS #408-050-011AS #408-050-010AS #408-050-002AS #408-050-216AS #408-050-215AS #408-050-008AS #408-000-042AS #408-000-041AS (measured from muzzle to breach) when installing the 90/22 stock. shorter than26",pleaseensurethat your 10/22'sbarrelisat least18" comply with Federal law requiring that rifles have an overall length no 10/22 rifleswithbarrel at least18"(45.7cm) longandupto.920" O.D. To charging handleandtriggerlinkage withblackMelonitefinish. FitsRuger fuller for asecure hold.Gentle, length-of-pull improves feel and sightpicture. Forend shapeis feature rubberrecoil pads. bedding blockthat extendsfrom theactiontoforend. Allmodels has an accuracyimproving, CNC machined, full-lengthaluminum posts at front andrear actionmountingpoints.Full Block model a drop-in fit.Pillarmodelfeatures moldedin,aluminumbedding and forend provide additionalgraspingsurface.Fully inlettedfor it isextremely quiet.Pebblefinish,textured panelsalongthewrist when wet. Non-slip rubber surface provides an enhanced grip, plus on fiberglass shell,iswarmtothetouchandwon’tbecomeslippery M77 shooting comfort of yourRuger combined with many custom features, enhances handling and rel. 3 SPECS: Designed for right-handed shootersonly. factory magazinesandmostaftermarket high capacitymagazines. age box that holds40rounds of .22LRammo.Accepts10-round suppressor, twosidemountedPicatinny rails,andadetachablestor (73.7cm) long,13 SPECS: of factoryforearm liner. Soft, rubberbuttpadcountersfelt recoil. Drop-in fit.Requires use ing andsightacquisition.Pebble-finishwristforend aidgrip. RUGER fits 98sporterandmilitaryactions.Rem.700BDLonly. Ruger 31.5"block. 14"long. (80cm) (35.5cm) l.o.p. 1.9 wt. g) (862 lb. SPECS: oz. (865g)wt.FitsMini-14, MiniThirty, andRanchriflespost180series. #408-000-074AS #408-000-008AS Classic-style, straightlinestockwithrubberskinovermolded ® STOCK # 1 MarkIIonly. / 2 lb.(1.6kg) wt.6061 aluminum opticsrailandbeddingblock.Steel OVERMOLDED™ RIFLE STOCK Fiber reinforced polymer, black.21 Fiberglass withrubbercovering, GhillieGreen orBlackcolor. 29" Fiberglass withrubbercovering, black.7075aluminumbedding ® MINI-14 8K206K85 Full BlockOvermoldedStock, 8K110L79 Pillar BedOvermoldedStock, 5 / 8 " (34.5cm) l.o.p., 1 Bullpup Stock, 8K81F24 Mini-14/30 Stock,GhillieGreen, Mini-14/30 Stock,Black, Mauser 98 ® Win. Win. Ruger Ruger Rem. Rem. Rem. Rem. Mauser 98 /MINI-THIRTY FITS SATISFACTION GUARANTEED � � � HOGUE Lightweight & Easy To Carry ACTION 1 ® / Mini-14 Short Short 2 Long Long Long Long Long Long " drop-at-heel givesfastmount ® ​4D260E08 1 -Overmoldedtechnology, / 4 " (2.8cm) drop at heel,1lb.14 1 / SINCE 1939 2 ® " (54.6cm) longwithoutbar orMiniThirty ab Sporter Mag. Varmint Sporter Sporter Sporter Standard Standard Sporter Mag. Sporter Sporter BBL. STYLE ​8K66B62 �

​ ® � . Extended BEDDING $ 127.99 $ 269.99 237.99 Pillar Full Pillar Full Pillar Full Pillar Full Full Pillar $ 76.99 Mauser 93.99 ® fits - - - #100-016-666AS #100-016-675AS #100-016-673AS #100-016-674AS #100-016-672AS #100-016-671AS #100-016-670AS #100-016-668AS #100-016-669AS #100-016-667AS control, and accessory mounting op improvement inergonomic comfort, handguard givesyourAK/AKMabig color of certainEasternEuropean woodAKstocks. MOEAKfitsstan in standard Magpul colors, plus a “Plum” hue that approximates the than wood,impervioustomoisture, andlooks good,too.Molded sory mountingsystem.Plus,thehard-molded polymerisstronger ment gastubecover. Fully compatible withMagpul’sM-LOK acces the barrel heats upduringlongshootingsessions,andareplace heat shieldtoprotect thehandwhen area for bettercontrol, integrated tions. Features anextendedgripping Earth SPECS: upgrade toanyKalashnikov-pattern rifle! loop onthehandguard retainer. AMOEAK/AKMHandGuard isan retainer; dard AKpattern rifleswithoutafront slinglooponthehandguard #100-016-676AS #100-016-680AS #100-016-678AS #100-016-679AS #100-016-677AS AK-74 rifleswithbarrels longerthan13"and17-18mmO.D. Installa functionality for themodernAKplatform! MountstoAK-47/AKM/ Ultimak gastuberailfor optics.TheZhukov HandGuard redefines position for optimized accessoryattachment. Compatible withthe superior ergonomics, plusM-LOK slotsat the3, 6, and9o’clock dispersion, whilethecomfortable injection molded exterior gives a solidflex-free installation, extra strength, and excellent barrel heat internal aluminumchassisclampsdirectly tothebarrel anddelivers niques andalsoprovides more accessorymountingpositions.The gripping surfacethat’s compatible withmodernshootingtech tory AKwoodhandguard. Itoffers anextendedlengthwithalarge tured solutiontothechronic shortcomingsof thesmall,skinnyfac 1.8" wide.2.1"highw/otopcover. 15.1 oz. wt. Earth SPECS: typical of theserifles,minoradditionalfittingmayberequired. cap andforward slingmount.Duetothewiderangeof tolerances tion requires permanent removal of thefactoryhandguard retaining Control & Accessory Options Of Control & Accessory Improves Operating Comfort, Snap-on replacement for factory (FDE), O.D. Green (ODG),Stealth Gray(Gray), andPlum. (FDE), O.D. Green (ODG),Stealth Gray (Gray), andPlum.11.7" OAL. Reinforced, injection-moldedhard polymer, Black(Blk),Flat Dark Reinforced, injection-moldedhard polymer, Black(Blk),Flat Dark MOE MOE AKM fits standard AKM pattern rifles with a front sling Your Kalashnikov Magpul AK-47/AKM/AK-74 Magpul AK-47/AKM/AK-74 Zhukov Handguard ® AK/AKMHandGuard MOE AKM MOE AKM MOE AKM MOE AKM MOE AKMHandGuard,Blk, ​3K33M30 MOE AKHandGuard,Plum, MOE AK MOE AK MOE AKHandGuard,FDE, MOE AKHandGuard,Blk, 3K33A30 3K33J30 3K33Q30 Zhukov HandGuard,Blk, Zhukov HandGuard,Plum, Zhukov HandGuard,Gray, Zhukov HandGuard,ODG, Zhukov HandGuard,FDE, � Hand Guard,Gray, Hand Guard,ODG, � � � � Hand Guard,Plum, Hand Guard,Gray, Hand Guard,ODG, Hand Guard,FDE, - Hand Guard is a full-fea Gives Your Kalashnikov 21st Century Tactical21st Century Features & Versatility ab The Magpul Zhukov ​3K90G11 ​3K33M30 ​3K90E11 � ​3K33D30 �

​3K90Q11 � ​3K90H11 � ​3K33P30 ​3K90K11 � ​3K33L30

​3K33I30 �

​3K33I30 ​

� � � � � � � � $ 35.10 $ 94.95 35.10 35.10 35.10 35.10 35.10 35.10 35.10 35.10 35.10 94.95 94.95 94.95 94.95 Office/Tech: ab ------#100-017-903AS #100-017-901AS #100-017-899AS #100-017-900AS #100-017-898AS #100-017-897AS #100-017-911AS #100-017-909AS #100-017-910AS #100-017-908AS #100-017-907AS #100-017-906AS #100-017-904AS #100-017-905AS #100-017-902AS structions included. (FDE), O.D. Green (ODG),Stealth Gray(Gray), andPlum.Installation in SPECS: #687-000-091AS into moststampedAK-47/74 pattern rifles andgives4-positionad receivers only. Doesnotfitrifleswithmilledreceivers. 4 QDslingpointsandaslip-onrecoil pad.Fitsrifleswithstamped cheek riser to get the perfect eye-position for iron sights or optics, justable buttstocktofitdifferent shooters.Alsofeatures a7-position Cheek Riser& QD Sling Points Carbon-filled polymerstockdrops OPFOR ADJUSTABLE BUTTSTOCK 4-Position Stock, Adjustable PRO MAG Reinforced, injection-moldedhard polymer, Black,Flat DarkEarth For Your Kalashnikov Zhukov 3K192C78 Zhukov Furniture Set,Plum, 3K192A78 Zhukov Furniture Set,Gray, 3K192B78 Zhukov Furniture Set,ODG, 3K192M78 Zhukov Furniture Set,FDE, 3K192J78 Zhukov Furniture Set,Black, 3K98F23 AKM Furniture Set,Plum, AKM Furniture Set,Gray, 3K98M23 AKM Furniture Set,ODG, AKM Furniture Set,FDE, 3K98D23 AKM Furniture Set,Black, 3K100I18 MOE AK-47/74 Set,Plum, 3K100I18 MOE AK-47/74 Set,Gray, 3K100P18 MOE AK-47/74 Set,ODG, 3K100M18 MOE AK-47/74 Set,FDE, 3K100G18 MOE AK-47/74 Set,Black, Stock, Archangel AK-Series Adjustable Magpul AK-47/AKM/AK-74 MOE AK-47/74

641-623-5401 Furniture Sets ​7H41E33 � � � � � � � � � � � � � sitting. Molded in standard Mag you canupgradeyourrifleinone handguard, andpistolgrip-so Magpul furniture -buttstock, complete replacement setof � � a particularrifle. some fitting,modifications to tainer. loop onthehandguard re pattern rifleswithafront sling MOE AKM fits standard AKM on thehandguard retainer; rifles withoutafront slingloop 47/74 fitsstandard AKpattern wood AKstocks. MOEAK- of certainEasternEuropean that approximates thecolor pul colors,plusa“Plum” hue Fast, Easy Way To Upgrade Handy kitseachcontaina ARCHANGEL Your Kalashnikov Zhukov -mayrequire

​3K98I23

​

​3K98K23

​ ​ ​ ​ ​ ​ ​

​

​ ​ ​ ​ ab � ab � $ 103.99 $ 44.99 103.99 103.99 103.99 103.99 103.99 103.99 103.99 103.99 103.99 199.99 199.99 199.99 199.99 199.99

- - - - RIFLE STOCKS - - - - -

ab 18.99 $ 14.99 $ 99.99 ® $ 175.99 $ 200.99 ��

189 -

​ ​ ab

with no modifi ������������ ® ​7H17A23 �� ® ​7H13M77 /THIRTY PAGE ® A Tactical Rifle A Tactical ​1K92P75 Turns Your M1891 Into M1891 Your Turns 10/22 ® To Popular Ruger Rifles Popular Ruger To ab MINI-14 Adds Adjustable Stock & Rail & Stock Adjustable Adds ® ������������������������������������������������ ������������������������������������������������� ab MOSIN-NAGANT MOSIN-NAGANT

RUGER

Mag, 5-Rd, Mosin-Nagant Mag, 10-Rd, Mosin-Nagant Mosin-Nagant Archangel Stock, Mosin-Nagant 7H164F59 Archangel Ranch Spartan Stock, 7H199D56 10/22 Bullpup Stock, RUGER MWG MAG PRO ARCHANGEL OP FOR STOCK ARCHANGEL MUZZELITE BULLPUP STOCK Carbon-fiber filled polymer, black. 13.62" - 14.75" (34.6cm – (34.6cm - 14.75" black. 13.62" Carbon-fiber filled polymer, ARCHANGEL SPARTAN STOCK SPARTAN ARCHANGEL Composite, black. 23" (58.4cm) long. 2 lbs. (907g) wt. Mini-14 long. 2 lbs. (907g) wt. Mini-14 black. 23" Composite, (58.4cm) MAG PRO Drop-in tactical stock lets you upgrade your M1891 Mosin-Na M1891 your upgrade you lets stock tactical Drop-in & Easy To Carry To Easy & Carbon-filled polymer stock fits onto Ruger Mini-14 and Mini- Mini-14 polymer stock fits onto Ruger Carbon-filled Lightweight, and the Make The Ruger The Make Semi-Autos Compact Semi-Autos #687-000-083AS #687-000-084AS lower molded from a proprietary carbon-fiber filled carbon-fiber proprietary a from molded lower spring wire chrome-silicon with a robust black polymer, and function. feeding reliable for SPECS: SPECS: cheek-riser incremental (1.3cm) .5" length-of-pull. adjustable 37.5cm) adjustments. ZINES MAGA STOCK ARCHANGEL MOSIN-NAGANT the magazines made specifically for - Detachable box OPFOR stock. Body and fol Archangel Mosin-Nagant gant. Made of tough, carbon filled polymer, stock features an ad stock features tough, carbon filled polymer, gant. Made of gooseneck cheek riser, butt pad, adjustable justable length-of-pull palm-swell, and QD sling swivel attachment grip with comfortable Trigger is inletted to accept a Timney points. Stock contours most barrel of allows free-floating Forend required. cation with either also fits M-91/30 Stock tensioner. and includes a barrel carbines, T-53 M-38/M-44/Chinese Soviet receivers, hex or round detach rifles and carbines. Accepts Archangel and Finnish M-39 magazine (included), or the 10-round black-polymer able 5-round, magazine (sold separately). #687-000-082AS tures 4 QD sling swivel points, and has a storage compartment for compartment for swivel points, and has a storage 4 QD sling tures Forend items inside the pistol grip. and other small extra batteries can be quickly drilled out to allow that points hard has pre-molded Ranch 6 o’clock rail segment, not included. Fits all of attachment calibers. and 6.8mm 7.62x39 Fits .223, Rifles made since 1983. Thirty and gives a pistol grip, adjustable buttstock and cheekpiece a pistol grip, adjustable buttstock Thirty and gives Fea optics and acccessories. rail for top Picatinny and full-length #687-000-094AS SPECS: SPECS: original stock. swivel from use of requires ideal length for brush brush ideal length for hunting or backpacking. to the no modifications factory stocks, for replacement Drop-in and high impact, composite materials, Made from trigger or safety. scope base equipped with open sights, a quick detach, Weaver-style and sling. Fits Ruger 10/22 with factory weight barrel. #556-100-102AS

- - - ® - 10/22 132.99 132.99 132.99 ® $ 101.99 $ 132.99 ® �����

" by turning the 8 ® / 5 10/22 ® 7H95J36 " to 14 2 / 10/22 1 ® ������������������������������ uger ������������������������������������ " (37.1cm). Accepts Ruger Accepts " (37.1cm). �������������������������������������� �������������������������������������� 8 ab / An Easy Way To Get Better To Easy Way An 5 RUGER ​3K122I87 No Alterations To Action Or Barrel Or Action To Alterations No Performance From Your Rifle With With Rifle Your From Performance Visit brownells.com/dream Visit brownells.com/dream ​3K122G87 ​3K122L87 ​3K122K87 ab R Magpul X-22 Stocks X-22 Hunter " (34.3cm) to 14 " (34.3cm) 10/22 Deluxe Target Stk, Target 10/22 Deluxe Ruger 10/22 Hunter X-22 Stock, Ruger 10/22 Hunter X-22 Black, Stock, Ruger 10/22 Hunter X-22 FDE, Stock, Ruger 10/22 Hunter X-22 Gray, Stock, Ruger 10/22 Hunter X-22 OD Green, 2 / 1 MAG PRO Economical Price Economical Molded, high-impact polymer, matte black. Length of pull ad of black. Length matte Molded, high-impact polymer, Reinforced polymer, Black, Flat Dark Earth (FDE), OD Green. Ac Dark Earth (FDE), OD Green. Black, Flat polymer, Reinforced Of A High-End Stock At An At Stock High-End A Of Lightweight synthetic thumbhole stock gives your .22 LR 10/22 .22 your thumbhole stock gives synthetic Lightweight The Hunter X-22 is the easy way to make an ordinary 10/22 an ordinary an to make is the easy way The Hunter X-22 Comfort & Control Features Control Features & Comfort ARCHANGEL DELUXE TARGET STOCK TARGET DELUXE ARCHANGEL #687-000-063AS .22 LR barreled action with standard or bull barrel. 46 oz. (1.3kg) weight. weight. (1.3kg) 46 oz. or action bull barrel. with standard .22 LR barreled included. hardware Mounting adjustment wheel. Built-in, raised cheekpiece gives you a secure, secure, a you gives cheekpiece raised Built-in, wheel. adjustment target with use for elevation adequate and cheekweld comfortable Mag and swivel stud accepts Pro sling scopes. Forearm-mounted the the toe of Harris-type bipods, with a second sling swivel stud at solid, stable contact provides forearm buttstock. Wide, flat-bottom dissipate help ports ventilation while rest, or bag shooting a with points attachment sling recessed Four cool. barrel the to keep heat compartment in accept pushbutton-style QD sling swivels. Storage the hollow pistol grip. SPECS: SPECS: range: 13 justment able length-of-pull and comb height for a custom fit that's best for best for a custom fit that's and comb height for able length-of-pull options, a non-slip rubber gives multiple sling mounting Also YOU. Drop-in attachment. easy accessory slots for pad, and M-LOK recoil tray that barrel all - and a reversible at - not gunsmithing installation a factory "pencil" whether you have of fit regardless proper ensures bull barrel. tube or a target profile SPECS: adjust - 36.8cm) (31.7cm - 14.5" dia. 12.5" (2.3cm) up to 0.92" barrels cepts loops. footman's 1.25" (3.2cm) able LOP. the ergonomic enhancements of a free-float target stock at an stock at target a free-float enhancements of the ergonomic barreled amazingly economical price. Simply transplant your rifle’s and you permanent modifications, action into the Archangel—no molded any time. Reinforced it to your original stock can return the effects highly resistant and strong polymer is exceptionally barrel and impact, while the free-float humidity, temperature, of image” contours. “Mirror all 10/22 barrel channel has clearance for for comfortable so this stock is equally design is fully ambidextrous, lets you select right- or left-handed shooters. Adjustable buttplate 13 from pull settings 8 length of any one of extraordinary shooter. Gives your rifle an ergonomic grip, adjust rifle an ergonomic Gives your shooter. extraordinary #100-017-574AS #100-017-576AS #100-017-573AS #100-017-572AS - - - - - order on the web 14.99 44.99 242.25 $ 89.99 $ 44.99 $ 242.25 " (4.6cm). 1 " (4.6cm). brownells.com 16 / ������ 13 " (23.8cm). Ex " (23.8cm). 8 / ​ 3 ���������� ​

" (4.6cm). 1 lb. 13 oz. 1 lb. 13 oz. " (4.6cm). " (27.3cm). Extended " (27.3cm). 16

4 Restoration / /

1 Tight Grained Tight 13 ​3K11P12 Superior grade, �������������������������� " of finish size, then ma finish size, " of Walnut For Authentic For Walnut 16 / ​3K203A10 1 " sling loop easily install on " sling loop easily install on 2 / 1 ​1G43I10 MAGPUL " to the length of pull and provides pull and provides of length to the " - - 2 ������������������������������������������������ / 1 ���������������������������������������������������� ���������������������������������������������������� ab & BUTTPLATE PRS2 Stock for FAL, PRS2 Stock for H&K G3/HK91, 3K203G10 PRS2 Extended Buttpad, Win Buttplate, Marlin Crescent Buttplate, ​1G43E10 Win 92/94 Carbine Buttstock, 1G78D04 " (27cm). Comb height can be raised 1 height " (27cm). Comb 8 ab PRECISION GUN WORKS PRECISION / 5 " (1.6cm) to the length of pull over the stock’s original to the of length " (1.6cm) 2 PRS2™ PRECISION STOCK PRECISION PRS2™ / 1 " (29.2cm). Comb height can be can be raised 1 height Comb " (29.2cm). 2 / 1 ab Molded polymer, black. G3 - Retracted length 9 Molded polymer, 1.675" length: Win - 1.675" Steel, as cast, in the white. Tang American black walnut, straight grain. Buttstock accepts the origi grain. Buttstock accepts American black walnut, straight Fast Field Adjustment Field Fast Fully adjustable stock for for adjustable stock Fully model fits metric FN-FAL rifles with fixed buttstock and standard standard and buttstock fixed with rifles FN-FAL fits metric model OREND BUTTSTOCK FOREND LEVER ACTION #100-003-076AS #100-005-599AS #100-003-075AS either side of the stock for any shooting situation. Drop-in installa Drop-in situation. any shooting stock for the either side of ment for optical sights simply ment for pad with solid, recoil Rubber Allen-head screws. by loosening two and onto your shoulder securely seats core machined aluminum quick- Removable, sustained shooting exercises. won’t slip during 1 sling mount and rear detach front and/or rifle’s original factory hardware. tion with included hardware FAL rifles. stock or Inch pattern folding Will not fit Paratrooper buffer. steel factory stock, fixed with rifles G3/HK91 Koch & Heckler fits G3 SR-9, PTR-91, HK93, Also fits HK33, buffer. and standard backplate, Extended CETME installation. for and CETME; gunsmithing required approximately adds Buttpad SPECS: tended length 10 ment wheels. Comb also allows ment wheels. adjust relief eye range of a .65" extra protection from felt recoil for easier between-shot recovery recovery easier between-shot for recoil felt from extra protection purchase a secure ridges ensure Deep horizontal during rapid fire. original pad’s mounting the Installs in minutes reusing on shoulder. screws. tactical rifles readily adapts readily tactical rifles height comb and pull length of adjust click-detent two with length 11 factory pad. 3.1 oz. (89g) weight. oz. factory pad. 3.1 FAL - Retracted length 10 FAL (850g) weight. oz. lb. 14 Molded rubber, black. .80" thick. Adds black. .80" Extended Buttpad - Molded rubber, (822g) weight. approximately #710-000-005AS #710-000-004AS straight-grained, American Black Walnut closely matches the origi closely matches straight-grained, American Black Walnut nal wood to provide that extra look of authenticity. Semi-finished, authenticity. extra look of that nal wood to provide to within approximately fully contoured are buttstock throats marks; all production chine sanded to remove final fit, for opened and sanded. Inletting is left slightly “tight,” ready stain, and finish. SPECS: Also fits Win. 94 before listed below. or buttplate nal factory buttplate serial #1,500,000. original of BUTTPLATEreproductions - Authentic and polishing, plus final shaping factory parts. Require trap for doesn’t have holes. Winchester drilling screw 1886, 1885 and late late 1873, Fits late cleaning rod. Marlin Crescent 1895 and 1904. 1894, 1892, plus 1890, 1891, 1892, 1893, 1889, fits models 1888, buttplate and 1897. 1895 1894, SPECS: (52.4mm). - 2.063" ; Marlin (42.5mm) #710-100-192AS - - - ab

159.99 124.99 229.99 265.95 265.95 265.95 265.95 246.95 246.95 246.95

$ 219.99 $ 246.95 369.99 369.99 369.99 369.99

​ ���� ����

������ ������ �������� �������� �������� �������� ����� ����� ����� ����������� ����� ​7D226B11 � 7D147C58 ​233E95 ​234K37 3K233E95 ​K234I37 3K233H95 ​K234D37 ​3K233P95 ​K234D37 ​7D115F56 ​9Z352P35 ​9Z352J35 ​9Z352N35 ​9Z352D35 emington 700 Free-Floats Barrel - Free-Floats R 800-741-0015 No Bedding Required Enhances Ergonomics &

������������������������������������������������� MINELLI AK-47 Hunter 700 Stock Magpul Hunter SA Kit, Black, Hunter SA Kit, FDE, Hunter SA Kit, ODG, Hunter SA Kit, Gray, Hunter LA Stock, Black, Hunter LA Stock, FDE, Hunter LA Stock, Gray, Hunter LA Stock, ODG, Hunter SA Stock, Black, Hunter SA Stock, FDE, Hunter SA Stock, Gray, Hunter SA Stock, ODG, 7D206D50 Springfield 1903A3 Walnut Stock, Springfield 1903A3 Walnut Stock, M1 Garand Walnut Stock, K98 Mauser Walnut Stock, Walnut AK-47 MILITARY WALNUT STOCKS WALNUT MILITARY Polymer shell, anodized A380 cast aluminum bedding block, A380 Polymer shell, anodized

Walnut. Straight grain, minor figuring, oil finish. grain, minor figuring, oil finish. Straight Walnut. Garand Drop-in replacement stock enables the user to fully adjust both replacement Drop-in With more With more

K98 Mauser High-Grade Military Rifle Dress Up Your Your Up Dress Walnut Stocks Walnut #100-019-964AS #100-019-965AS #100-019-967AS #100-019-966AS SPECS: SPECS: 60° grip Gray. (ODG), Stealth Green Dark Earth (FDE), O.D. Black, Flat 13” (33cm) -15” (38.1cm). adjustable from axis. LOP bore angle from tory and aftermarket (most) triggers. Forend has M-LOK™ slots on slots M-LOK™ has Forend triggers. (most) and aftermarket tory recoil Rubber accessory mounting. easy for and bottom sides the both Remington 700 for Available recoil. felt pad eases the sting of Short Action (SA) and Long Action (LA) rifles. Kit lets you upgrade operation; your rifle's stock AND convert it to detachable magazine (.308 Win) 7.62x51 10 AC includes short action stock, two PMAG 700 bolt action mag well. magazines, and a Magpul 10-round fortable shooting. Made of reinforced polymer, with a cast aluminum with a cast aluminum polymer, reinforced shooting. Made of fortable and accepts fac all Remington barrels floats free bedding block that SPECS: SPECS: tention to detail means these Italian-made stocks look historically Italian-made stocks tention to detail means these finished are a glove. All stocks your rifle’s action like and fit accurate a smooth, traditional military-style appearance. oil, creating with M1 Garand, Mauser K98, Springfield 1903A3, for available Currently if applicable, and they are handguard including correct and AK-47, some fitting. May require installation. for ready the length-of-pull and comb height for a better fit and more com more and fit better a for height comb and length-of-pull the than 70 years of than 70 years of for stocks reproduces faithfully woodworking experience, Minelli inletting and at Careful walnut. quality military rifles using classic #100-018-698AS #100-016-644AS #100-016-645AS #100-016-646AS #100-018-737AS #100-018-738AS #100-018-699AS #100-010-732AS #100-010-733AS #100-010-735AS #100-016-643AS

#100-010-731AS Orders/Tech: STOCKS RIFLE Gives Your AK TheAdjustability & Convenience Of AnM4 Stock #687-000-093AS #780-001-233AS #687-000-092AS #780-001-234AS steep pistol grip angle to give proper wrist position when using op lb. (907g)wt.FitsRugerM77MKII. 13 riser. Thumbwheels allow precise length-of-pull adjustment from other M14-style rifles and gives adjustable length of pull and cheek SPECS: non-slip hold. tory sporter contour. Textured finish and raised checkering ensure a traction of thestock.Gussetedforearm acceptsbarrels withfac point-of-impact shift anderratic groups caused by expansion/con reled actioninalltemperature andhumidityextremes. Eliminates inserts for QDslingswivels. handguard. Comeswith2standard slingswivelstudsand4steel with extendedrailcover, andstock accepts rifle'soriginalfactorytop teries andsimilar-size items.Forend features 6o'clockPicatinny rail tics. Pistolgripalsohasstoragecomparmentinsidefor spare bat May require minor fitting. calibers. IncludesslingswivelstudsandgripcapwithRugerinsignia. #100-003-177AS end cap,mounting bolts, nut,(3)dustplates, and installation instructions. buttstocks that fita1.14" dia. buffer tube.Kitincludes stockextension, Yugo RPKandIraqiTabuk. Accepts Colt andother mil-speccollapsible length. FitsmostAK-47/AKM/AKSrifleswithstamped receivers, except the SPECS: mounting hardware. by removing screw-on cap from the rear of the extension. Includes sling attachment. Aninternalstoragecompartment is accessible sion accept quick-detach, push-button swivels for single-point many buttstocks. Near-receiver sockets oneachsideof the exten numbers are visiblethrough therelease pinaccessholefound on your rifle. Provides five locking positions; corresponding white index stock onyourAK-47 toletyouinstallanM4collapsible stockon 5 / Glass-filled nylonprovides consistentpressure againstthebar Carbon-filled polymerstockacceptsSpringfieldM1Aandmost Aluminum receiver extension replaces the standard, fixed butt 8 " to14 COLLAPSIBLE STOCKADAPTER COLLAPSIBLE Zytelsynthetic, 30 black. Aluminum, hardcoat anodized, matte blackfinish.8"(cm)overall

13 PRO MAG / 16 ALL-WEATHER STOCK 3 / ", andcheekriserin.05" increments. Stock features 4 " thick,rubber, buttpadtamesthehardest recoiling RUGER SA All-Weather Stock, All-WeatherLA Stock, 7H238G84 Archangel M1APrecisionStock,Tan, Black, Archangel M1APrecisionStock, AK-47 StockAdapter, M1A PRECISION STOCK ab VLTOR AK-47 ab ​7H238H73 ® M14/M1A M77 ab Provides Strength& Stability In � 7 Drop-In Stock Helps Give Proper / 8 " (78.4cm)" OAL. 13 All Weather Conditions O.E.M. Synthetic Stock PAGE Eye Position ForOptics ® � MARK II ​3A84C04

​8G101N42 ​8G101I42 ARCHANGEL 190 3 / 4 " (34.9cm)" l.o.p. 2 � � �

​ $ 240.99

$ 112.99 247.99 $ 89.99 112.99

------#100-004-044AS #100-004-047AS #100-004-245AS #100-004-244AS #100-004-050AS #100-004-049AS #100-004-046AS #100-004-045AS lop, 2 available for Ruger10/22LRwithfactorysporterbarrel or.920" di rubber recoil padandsemi-glossweather-resistant finish.Models improved accuracy. Inlettedfor adrop-in fitandcompletewitha the factorywoodenstockandprovides arock-solid platform for 1 gray andlight brown. Extreme-30"(76.2cm) long,14" (36cm)lop,2 Brown w/darkbrown accents orCayenne,acombination of red, dark SPECS: in darkgrayorlightbrown. factory drop at heelandcomb.Fitsfactorysporterbarrels. Available or lightbrown. Explorerhasaslim,contoured designthat matches from arest. Fits.920" diameterbullbarrels. Available indarkgray semi-flat forend for improved stability when shooting offhand or a sporter-style, thumbholestockwithrollover cheekpiece.Includes diameter bullbarrels. Available indarkgrayorlightbrown. Tundra is provides increased stabilitywhenshootingfrom arest. Fits.920" high combfor easyeyeto-scopealignment.Wide,semi-flat forend and slottedforend. Features aMonteCarlo cheekpiecewithextra Trailblazer issimilartoExtreme, butwithoutskeletonized buttstock ameter bullbarrels. Available indarkgray, lightbrown andcayenne. ized buttstockandslottedforend helpreduce weight.Fits.920" di improved stabilitywhenshootingoffhand orfrom arest. Skeleton with rollover cheekpiece,palmswellandsemi-beavertail forend for red, darkgrayandlightbrown. Extremefeatures athumbholegrip light brown withdarkbrown accentsorCayenne,acombination of ameter bullbarrel. Colorsincludedarkgraywithlightaccents, drop at heel,2.4 lb.Fits.22LRmodelsonly. (6cm) drop at heel,2.35 lb.(1.1kg). Trailblazer 28 - 3 / 4 " (4.4cm)drop at heel,2.4(1.1 kg).lb. 29" long,14" Explorer- 1 lop, High-strength laminated stockisstronger andmore stablethan 3 / 8 " drop at heel,2.6 lb.(1.2kg). Tundra 29"(73.6cm) - long,14" lop, Laminated hardwood. Dark Gray w/light grayaccents, Light REVOLUTION RUGER Laminated For Ultimate Stability LAMINATED STOCK 3B163Q47 Explorer-Stock Barrel,DkGray, 3B178H34 Tundra-Bull Barrel,Lt Brown, 3B178I34 Tundra-Bull Barrel,DkGray, 3B163Q47 Trailblazer-Bull Barrel,Lt Brown, 3B163M47 Trailblazer-Bull Barrel,DkGray, 3B178K34 Extreme-Bull Barrel,Cayenne, 3B178G34 Extreme-Bull Barrel,Lt Brown, 3B178A34 Extreme-Bull Barrel,DkGray, SATISFACTION GUARANTEED ab � � � � � � � � � SINCE 1939 Trail Blazer Extreme Explorer Explorer ® 10/22 1 /

2 " (72.4cm) long,14" ​

​

​

​ ​

​ ​

® ​ $ 189.99 189.99 189.99 189.99 189.99 169.99 169.99 169.99 3 3 / / 8 4 - - - " " #019-000-059AS also beraisedanadditional adjustment toprovide correct eyealignmentwithoptic;buttstockcan negative anglefor quickandeasyshouldering.Easy-to-operate re glass-filled nylon composite with a rubber recoil pad that has a slight ultimate compactnesswhenstoringtherifle. Madefrom durable, 19" (48.3cm)19" 7 folded.- Buttstock SPECS: operators. Pebbletextured surfaceprovides anon-slipgrasp. your hand; finger grooves accommodate both right- andleft-handed ing options.Theergonomically shapedpistolgrip fillsthecontoursof lease leverenablesquickLOP adjustments.Cheekrest has that can be installed in a variety of locations for plenty of slingmount of flexibilityinmountingaccessories.Includesthree slingswivelstuds Comes withone4"andfour 2"detachablePicatinny railsfor plenty stock tubethat provides correct stockdrop for use withiron sights. bolt-on accessory rails. with standard (non-bull)barrel. Includes(1)4"and(4)2"moldedpolymer Pistol Grip - 4 - Pistol Grip #100-003-799AS #100-003-195AS #100-004-297AS 14 including rifleschambered in6.8 SPC. Mini Thirtymodelswithfirstthreedigits of serialnumber181orhigher, models includeprovisions for carryslingattachment. kit aremovable rubberbuttpadandforearm sideaccessoryrails.All fits 10/22with.920" O.D. barrel and addstothestandard Intrafuse composite makes yourRugerrifleeasiertohandleandshoot.Im from 11 Fits .920" O.D. bullbarrel only. Mini-14/Mini Thirty-Length of pulladjusts sights. Bottomforend railacceptsPicatinny/Weaver-style accesso style accessory rail for convenient mounting of scopes or electronic steel closure clip.Top coverattaches easilyandincludesaPicatinny- filling SAW-style pistolgripincludesinternalstoragewithaspring use of factory or aftermarket iron sights.The comfortable, hand- an optic,plusinterchangeable angledextensionfor unrestricted Kit includesastraightstockextensionfor proper eyealignmentwith justable M4-stylebuttstockfor fast,simplechangesinlengthof pull. proves the fit for the shooter with a six-position, push-button ad detachable forenddetachable rails. Lengthside of frompull adjusts 11 ly. 10 assembly hardware, andinstructions.10/22-Length of pulladjustsfrom collapsible stock,straight andangledreceiver extensions,railtopcover, (1.1kg) wt.Includesstockbody, lowerrailcover, SAW-style pistolgrip,T6 SPECS: able for 10/22 ries and includes a slide on cover if railisnotdesired. Models avail INTRAFUSE ADJUSTABLE STOCKKIT 3 3 model also includes removableincludes also and model buttpad 10/22 BullBarrel rubber / / 4 4 Six-position stockletsyouadjustlengthof pullandfolds for Adjustable stocksystemmoldedfrom tough,military-grade " (37.5cm) withbuttpadattached. Approx. 2lbs,11oz. (1.2kg) weight. " (27cm)to14 1 Rugged, Adjustable Design Improves Shootability Molded composite, BlackorDarkEarth.Approximately 2lbs.7oz. Glass-filled nylon,gray. 30"(76.2cm) overallstock lengthopened, / 4 " (28.6 cm)to14 TAPCO RUGER STRIKEFORCE 1 / ® 4 andMini-14 " (10.8cm)" 1 x long 1 / 4 TACTICAL STOCK " (36cm).Fitsstandard barrel Ruger10/22modelson Tactical Stock, Black, Mini-14/Mini ThirtyIntrafuse Stock, Black, 10/22 BullBarrelIntrafuse Stock, 5A78K57 10/22 Intrafuse Stock,DarkEarth, 3 / 4 " (37.5cm). Fitsstandard barrel RugerMini-14/ ​5A98A31 ​5A100F05 1 / 4 ® � " withincludedspacer. Includesasecond /Mini Thirty ®

1 / 3 SEMI-AUTO RIFLE / 2 " (19cm) long x 3 x long (19cm) " 8 Length-Adjustable, Folding RUGER 10/22 " (3.5cm)" models 10/22 Fits wide. ​9A94A55 � � Stock Gives Your 10/22 Exceptional Versatility ® rifles.10/22BullBarrelkit � 7 / 8 " (9.8cm)" high. ® 1 ab /

4 " (28.5cm) to ​ 7 / 8 $ 104.99 " vertical 104.99 104.99 $ 89.99

ab Office/Tech: ------(3.8cm) thick,2 Fits stampedreceivers only. receivers only. length 12 SPECS: rifles andshotguns,except the.410 bore shotgun. on sling. Fitsall commercial Saiga Includes detachableloopfor clip- ter extendedperiodsof rapidfire. to keep yourhandcoolevenaf ing flexibility. Plenty of ventilation you maximumaccessorymount and bottomPicatinny railsgives handguard withdetachableside SAIGA RIFLE/SHOTGUN HANDGUARD - Lightweight, modular SPECS: compartment for accessories. surface inallweather conditions.Features astorage turing won’tslipandprovides anexcellent gripping SAW-STYLE PISTOL GRIP-Unique,horizontal tex SPECS: slippage. control. Ribbedbuttplate prevents positive framelockingfor superior the original Israeli Galil design with FOLDING STOCK -Modeledafter SPECS: armor. Toe-mounted slingloopacceptsslingsupto1 negative anglefor quickandeasyshoulderingwhenwearingbody release leverfor fastadjustment.Checkered buttplate withslight to-operate, spring-loaded tactical environment. Easy- of pullbestsuitedfor the lets youselectthelength Six position,adjustablestock T6 ADJUSTABLE STOCK - requirements. gun incompliancewithU.S. CodeTitle18Section922(r)part-source that standsuptothetoughestabuse.MadeinU.S.A. tokeep your ity. Madefrom rugged,military-grade,moldedpolymercomposite tory partsandgivesyourAKamodernlooklong-lastingdurabil milled receivers. stamped receivers onlyandrequires drillingtwoholesinstock. #100-002-488AS #100-002-489AS #100-002-490AS #100-002-500AS #100-004-621AS SPECS: moving coursesof fire. your rifleorshotgunon-shoulderduring longshootingstringsor sory for competitive shooters;raised,non-slipsurfacehelpskeep collar. Won’t shootloose,staysputuntil it’sremoved. Great acces collapsible stockdesignsandTapco T6stocks. Functional, Durable Buttstocks, Handguards, Pistol Grips Attractive andfunctional,AK-47 furniture replaces woodenfac Rubber, black.Adds Molded polymer, black.Collapsed length8 Molded polymer, black.9 Molded polymer, black.L.O.P. is13 Molded polymer, black.4 1 / 4 comfort, lowerfelt recoil, plusanadditional Tapco T6 collapsible stock to add increased shooting buttplate; heldinpositionbyrubbertabsandafriction length-of-pull. Rubberpadslipseasilyovertheplastic " (31.1cm).L.O.P. adjustsfrom 10"(25.4cm) to14 INTRAFUSE URNITURE No permanentalterations necessarytoyour M4or 1 Increase ShootingComfort& Length-Of-Pull ab / 2 " (6.3cm) wideat base.Fitsstampedand TAPCO AK-47/SAIGA Saiga Handguard, SAW-Style PistolGrip, Folding Stock, T6 AdjustableStock, Tapco M4/T6Recoil Pad, T6/M4 RECOIL PAD

ab 641-623-5401 TAPCO CAR-15/M4 1 / 2 " (12.7mm) tolength-of-pull. Fitscurrent M4 1 / 2 " (24.1cm) long,1 1 / - - 4 " (10.8cm) tall,1 ​5A31L16 ​5A43I11 ​5A40B52 1 / 4 ​5A16L14 " (36.6cm). Fitsstamped � ​5A10H39 � 1 / 4 9 " (8.3cm), extended / 16 1 " (3.9cm) wide. / � 2 - � " 1 / 1 / 8 � " wide.Fits 8 " (35.8cm). 1 / 2 " tothe $ 44.99 $ 45.99 $ 10.99 $ 33.99 $ 17.99 - - - RIFLE STOCKS 83.99 $ 83.99 TM 191

�������� ������������ PAGE ​4H75K04 Raised Shown ​4H75G04

Standard Youth Stock, Standard Youth Stock, Raised Youth YOUTH STOCK YOUTH a year!

® #984-000-002AS #984-000-001AS " 4 10/22 / 1 ® RUGER " (28.6cm). 23 " (28.6cm). 4 $49.95 / 1 or call 800-741-0015 Only Pays for itself in just 4 orders! program gives Brownells customers a customers gives Brownells program PLUS WOOD ab FREE Standard Shipping on all orders & Overnight shipping Discounted 2-Day FREE Shipping on returns & discounts Special members-only offers Sign up now at Brownells.com/EDGE Sign up now at EDGE „ „ „ „ „ „ „ „ Sign up now at Brownells.com/EDGE Sign up now at The serious advantage. For a very low annual membership fee, your EDGE benefits include: Right Size For The Junior Shooter The For Size Right for sights or Raised for iron use with Standard cheekpiece for Walnut, oil finish. Length of pull approx. 11 pull approx. of oil finish. Length Walnut, SERIOUS SAVINGS Scaled down with a short forearm and length of pull to fit small and length of Scaled down with a short forearm or call 800-741-0015 and order Item #080-001-199 or call 800-741-0015 (59cm) long. 20.7 oz. (588 g) weight. oz. (59cm) long. 20.7 SPECS: SPECS: shooters. oil finish. Watco factory barrel. fit, fully inletted for scopes. Drop-in Fitted with black plastic buttpad. - order on the web

77.99 77.99 93.99 79.99 95.99 ab 110.99 $ 93.99 $ 71.99 $ 93.99 $ 72.99 $ 74.99 $ 69.99 $ 99.99 $ 99.99 $ 54.99 � � Yugoslav Yugoslav $ 105.99 ��� ����� brownells.com ����� ������� PRICE ��������� ab

​

4H67E54 4H89L30 4H95N31 4H89K30 4H62N29 4H48G78 4H64N54 4H65M29 ​4H71K30 �� ​4H69B79 �� ​4H84G05 ​4H84N05 ​4H86N30 ​4H69H79

​4H84I05 Original Contour Original American Walnut; American Walnut; ", center-to-center, receiver receiver ", center-to-center, 8 / 5 ab FITS ����� ������������������������������������������������ PLUS WOOD WOOD PLUS WOOD OREND ONLY FOREND Winchester 94 post ’64 Marlin 336 Pistol Grip 99 Pistol Grip Savage Grip 99 Straight Savage Winchester 94 post ’64 99 Savage Winchester 1890 Winchester 1906 BUTTSTOCK ONLY " diameter barrel channel for custom fitting and channel for " diameter barrel 16 Mauser 95 Walnut Stock, Mauser 95 Walnut Stock, Mauser 98 Walnut Stock, 48 Mauser Walnut Yugo 4H99K81 Finished Mauser 98 Stk, Mauser 98 Stk, Unfinished Mauser 96 Stk, Unfnshd Finished Savage 110 Stk, Savage 110 Stk, Unfinished / 9 BUTTSTOCK SET & FOREND Quick Handling Quick WALNUT MAUSER STOCK MAUSER WALNUT FINISHED REPLACEMENT STOCK American walnut. Length of pull approx. 14" (35.5cm). 32" (35.5cm). 14" pull approx. of American walnut. Length Walnut, straight grain, minimal figure. 14" (35.5cm) LOP. 2 lb. 2 LOP. (35.5cm) 14" figure. grain, minimal straight Walnut, Walnut, straight grain, no figure. May not accept original hardware original hardware accept May not grain, no figure. straight Walnut, Walnut For Comfortable Carry, Comfortable For Walnut STOCK # STOCK Classic walnut, finish sanded, and given a three-coat, Danish oil Classic walnut, finish sanded, and given a three-coat, Classic lines and quality walnut enhance the looks and accuracy and looks the enhance walnut quality and lines Classic Classic Monte Carlo In Traditional In Traditional Carlo Monte Classic fits large ring model 98, VZ-24 and commercial receivers. receivers. and commercial VZ-24 ring model 98 98, fits large PRE- is furnished without buttplate. screw spacing. screw stocks are fully shaped with factory, sporter with factory, fully shaped are stocks channel. Unfinished rel only final sanding and finish. Mauser 96 is channel; requires barrel 95% inletted with SPECS: ’95, ring actions. Mauser 96 fits ’93, Mauser 98 fits large (964 g) wt. oz. fits 110 long action with blind magazine. ’96 small ring actions. Savage SPECS: SPECS: Win. 1890 buttstock relieved without fitting. Win. 1906 buttstock cut flat. buttplate. crescent for rel channel is semi-inletted, lets you get an exact fit to your barrel exact fit to your barrel lets you get an channel is semi-inletted, rel plastic buttplate. and sanded; includes hard machined Fully contour. applying stain and finish. before final sanding requires Stock SPECS: SPECS: 95 fits small ring model 95 and (992 g) weight. (81.2cm) long. 2 lb. 3 oz. 96, fits the mid-length action with 7 48 fits the mid-length action with (Yugo) of the small or large ring Mauser action. Raised cheekpiece puts cheekpiece Raised action. Mauser ring large or small the of nose) slope (lowered in line with the scope; forward your eye right bar is fully inletted, Receiver area recoil. of effects diminishes the finish. Provides a good, serviceable replacement for the factory stock. for replacement a good, serviceable finish. Provides dings or of plus easy touch-up resistance, weather excellent Offers to ready inletted, 95% pattern. straight grain Quality wood, has a nicks. to fit to your action. install; only minor fitting required #984-000-034AS #984-000-041AS #984-000-035AS #984-100-098AS #984-100-096AS #984-000-003AS #984-000-004AS #984-200-098AS #984-000-015AS #984-000-044AS #984-000-019AS #984-000-020AS #984-000-022AS #984-000-009AS #984-000-065AS #984-000-006AS ------" bar 16 $ 53.99 $ 53.99 $ 76.99 $ 76.99 $ 54.99 $ 84.99 $ 84.99 ab / 9 $ 109.99 PRICE ​ ®

4H69I04 4H76E55 4H48A78 4H48E03 4H76C55 4H48P03 4H69Q04 " barrel; modification modification " barrel; 2 / 1 10/22 Look-Alike ® 800-741-0015

RUGER Real Walnut Offers Traditional Traditional Offers Walnut Real FITS " (32cm) L.O.P. 2 lbs. 2 oz. weight. Drop- weight. 2 lbs. 2 oz. " (32cm) L.O.P. Appearance & Excellent ServiceExcellent Appearance & 2 FLE RI ACTION BOLT Makes A 10/22 Into An M1 Carbine Carbine M1 An Into 10/22 A Makes / � ������������������������������������������������� Real Walnut; Original Contours Original Walnut; Real 1 WOOD PLUS WOOD Winchester 94 post ’64 Winchester 94 pre ’64 Winchester 94 pre Marlin 336 Pistol Grip Winchester 1890 Winchester 1906 Winchester 1890 Winchester 1906 BUTTSTOCKS ONLY WALNUT STOCK WALNUT 7B104I03 M1 Carbine Style 10/22 Stock, BUTTSTOCK SETS & FOREND ONE WEST

M1 CARBINE STYLEM1 CARBINE STOCK PLUS WOOD

Beechwood, red brown USGI or natural blond finish. Steel butt blond finish. USGI or natural brown Beechwood, red REPLACEMENT GRADE STOCK stocks are fully inletted with factory, sporter barrel barrel sporter factory, with fully inletted are Finished stocks " tapered barrel. Original M1 stock parts were used to make to make used M1 stock parts were Original barrel. " tapered STOCK # STOCK Replacement stock turns your 10/22 into a realis stock turns your Replacement The beauty and warmth of real walnut for bolt action sporting walnut for real The beauty and warmth of Classic walnut provides a close match to original factory stocks. to original factory stocks. match a close Classic walnut provides 2 / 1 Orders/Tech: steel patterns for automated precision lathes that cut raw Euro that lathes precision automated for steel patterns required to fit 10/22s with 16" Compact barrel or 20" Target barrel. or 20" Target barrel Compact to fit 10/22s with 16" required plate and sling swivel loop, Parkerized, matte black. 28" (71cm) long, 2" matte Parkerized, and sling swivel loop, plate high. 12 (5cm) wide, 5" (12.7cm) SPECS: SPECS: tion of a protective polyurethane sealer. Includes a stamped steel sealer. polyurethane a protective tion of upper swivel loop, sling grooves, anti-slip horizontal with buttplate Carbine M1 original the includes Even band. barrel and handguard, the 10/22 barrel. now serves to help ventilate cutout that op rod pean beechwood blanks into finished stocks in the unmistakable unmistakable the in stocks finished into blanks beechwood pean original GI oiler/ the in the butt for M1 shape, including the cutout inspected is stock every milling, After included). (not retainer sling sanding with action before flaws by test fitting to a 10/22 barreled for the to replicate an ultra-smooth surface. Stained 300-grit media for applica tung oil finish before the original USGI of dark red-brown tic looking stand-in for an M1 carbine without altering any part of of without altering any part an M1 carbine for tic looking stand-in action with the standard any 10/22 fit for drop-in the action. Easy 18 in fit on Ruger 10/22 with standard tapered 18 tapered in fit on Ruger 10/22 with standard #100-005-624AS #984-110-194AS #984-110-906AS #984-110-094AS #984-110-890AS #984-100-890AS #984-100-906AS #984-100-336AS pletely sanded, stained and finished with three coats of Watco oil Watco of coats pletely sanded, stained and finished with three and is easy to weather resists durable finish that an attractive, for Mauser 96 has non-slip buttplate. touch up. Includes hard, rifles. Com barrels. only minor inletting to fit larger channel; requires ting to your action. Ready for final sanding, stain and finish. ting to your action. Ready for Win. original hardware. Accepts grain, no figure. straight Walnut, SPECS: Win. 1906 buttstock cut flat. buttplate. crescent for 1890 buttstock relieved Quality wood, has a straight grain pattern. 95% inletted for easy fit easy inletted for 95% Quality wood, has a straight grain pattern.