Career & Technical Education Programs

Total Page:16

File Type:pdf, Size:1020Kb

Career & Technical Education Programs Career & Technical Education Programs Automotive Service Technician Pipefitting Automotive Service Technician AAS Degree Pipefitting Diploma (40 Credits) . 79 (72 Credits) . 66-67 Automotive Service Technician Diploma Plumbing (56 Credits) . 68 Plumbing Diploma (44 Credits) . 80 Cabinetmaking Sheet Metal Cabinetmaking Diploma (37 Credits) . 69 Sheet Metal/HVAC Ducts & Fittings AAS Degree (60 Credits) . 81 Carpentry Sheet Metal/HVAC Ducts & Fittings Diploma Carpentry Diploma (42 Credits) . 70 (40 Credits) . 82 CNC Toolmaking Truck Technician CNC Toolmaking Diploma (63 Credits) . 71 Truck Technician Diploma (67 Credits) . 83-84 Machine Operator Certificate (Right Skills Now) (20 Credits) . 72 Welding Welding Technology Diploma (48 Credits) . 85 Electrical Technology Welding Technology Certificate (16 Credits) . 86 Electrical Technology Diploma (74 Credits) . 73-74 Robotic Welding Certificate (17 Credits) . 87 Electromechanical Systems 360° eTECH Programs Electromechanical Systems Diploma (48 Credits) . 75 Automation Technologies Certificate (30 Credits) . 88 Electromechanical System Certificates: Machine Technologist Certificate (30 Credits) . 89 Electrical (16 credits) . 76 Machining & Automation Diploma (52 Credits) . 90-91 Mechanical (16 credits) . 77 Production Technologies Certificate (16 Credits) . 92 Industrial Programming (16 credits) . 78 Welding Technology Certificate (30 Credits) . 93 235 Marshall Avenue This document is available in alternative formats to individuals with disabilities by contacting the Saint Paul, MN 55102 Director of Access & Disability Resources at 651.846.1547 or [email protected]. Saint TEL: 651.846.1600 Saint Paul College, Paul College is an Equal Opportunity employer and educator and a member of Minnesota State. www.saintpaul.edu A member of Minnesota State 3/23/21 Program Requirements Guide 2021-2022 Automotive Service Technician AAS DEGREE Program Overview Program Faculty Tool Costs Students will need to supply their own basic tools Automotive repair requires trained technicians Llewellyn Olivier skilled in the use of testing equipment, and tool box. The estimated cost for professional [email protected] special tools, and the latest information and quality tools and tool box is approximately $2,000–$3,000. Tool vendors will be on campus specifications to service the many types of John Purcell automobiles. Technicians diagnose trouble in any during the first week. [email protected] one of thousands of automotive components. They work with many new systems each year David Vorderbruggen that require new service techniques and training. [email protected] Some of these include air conditioning units, Program Start Dates emission control devices, alternators, electronic Jake Yernberg Fall (AAS General Education credits can be taken ignition, and electronic fuel injection. [email protected] any term) Students are prepared to take the ASE Length of Program certification tests when they have completed the program. ASE certifies technicians nationwide. This is a full-time, day and evening program. The Program Requirements program can be completed in four semesters. Students should have good mechanical aptitude, Check off when completed Students can enroll in the program only in the fall. be in good physical condition and have the Admission Requirement ability to get along with others. Students also Successful completion of each semester in this need to be able to read and process technical program is a prerequisite for participation in the Admission requires completion of the information. following semester. Automotive Service Technician Diploma, or concurrent enrollment in the second year Auto Career Opportunities Course Cr Technician program. Opportunities are expected to be plentiful for AUTO 1415 Introduction to Automotive automotive technicians with technical training Technology ................................4 according to the U.S. Department of Labor. AUTO 1430 Brakes ..........................4 The department also states that the growing AUTO 1441 Alignment & Suspension ...........4 complexity of automotive technology, such AUTO 1510 Clutch/Driveline Manual Transmission ..3 as the use of electronic and emissions control equipment increasingly necessitates that cars AUTO 1523 Four Wheel Drive Differential ........3 be serviced by professionals. AUTO 1530 Basic Electrical & Battery ...........3 AUTO 1540 Basic Engine Management ..........3 See back of this guide for The auto technician may work in a dealership AUTO 1550 Heating & Air Conditioning .........4 garage, an independent garage, or as a Course Sequence & Transfer Opportunities specialist. Opportunities exist for a technician AUTO 2410 Starting & Charging Systems ........3 to become a shop service sales person, new car AUTO 2420 Electrical Accessories ..............3 dealership service manager, or shop owner. AUTO 2430 Engine Theory & Repair ............4 AUTO 2440 Engine Installation ................2 Information is subject to change. This Program Requirements Guide is not a contract. Program Outcomes AUTO 2450 Introduction to Auto Computers .....2 1. Graduates will be prepared to pass all 8 ASE AUTO 2513 Fuel Systems .....................3 tests. AUTO 2520 Engine Drivability .................3 Minimum Program Entry Requirements AUTO 2530 Automatic Transmission Theory. .2 2. Graduates will have knowledge and skills in Students entering this program must meet use of testing equipment, special tools, and AUTO 2542 Automatic Transmission the following minimum program entry specifications for servicing automobiles. Diagnosis & Repair ..........................4 requirements: AUTO 2550 Specialized Lab 1 .................2 3. Graduates will have the knowledge and Reading: Score of 240+ or grade skills to diagnose problems in automotive Subtotal . 56 of “C” or better in READ 0721 or systems. READ 0724 or EAPP 0860 General Education/MnTC Requirements Cr 4. Graduates will be prepared for employment Writing: Score of 240+ or grade as Automotive Service Technicians. Refer to the Minnesota Transfer Curriculum Course List of “C” or better in ENGL 0921 or for each Goal Area EAPP 0870 5. Graduates will have proficient Goal 1: Communication ......................7 communication skills for customer service. ENGL 1711 Composition 1 – 4 cr Arithmetic: Score of 237+ 6. Graduates will have business and COMM 17XX – 3 cr Spatial assessment required: Score 10+ Goal 3 or Goal 4 ............................3 management skills required of an Shop/classroom visit recommended; Goal 3: Natural Sciences OR automotive service technician. student must have a valid driver’s license . Goal 4: Mathematical/Logical Reasoning Goal 5: History, Social Science, and Assessment Results and Prerequisites: Behavioral Sciences .........................3 Students admitted into Saint Paul College Goal 6: Humanities and Fine Arts ...............3 programs may need to complete additional courses based on assessment results and General Education Requirements . 16 course prerequisite requirements. Certain Total Program Credits . 72 MATH, READ, and ENGL courses have additional prerequisites. 278A 235 Marshall Avenue This document is available in alternative formats to individuals with disabilities by contacting the Saint Paul, MN 55102 Director of Access & Disability Resources at 651.846.1547 or [email protected]. Saint TEL: 651.846.1600 Saint Paul College, Paul College is an Equal Opportunity employer and educator and a member of Minnesota State. www.saintpaul.edu A member of Minnesota State 3/23/21 Program Requirements Guide 2021-2022 Automotive Service Technician AAS DEGREE (continued) Course Sequence Transfer Opportunities The following sequence is recommended; Saint Paul College has a transfer articulation however, this sequence is not required. Contact agreement between the following program and Program Faculty with questions. post-secondary institutions for the baccalaureate degree programs listed below. First Semester For more information please go to AUTO 1415 Introduction to Automotive saintpaul.edu/Transfer. Technology ................................4 Automotive Service Technician AAS AUTO 1430 Brakes ............................4 BA Individualized Studies AUTO 1510 Clutch/Driveline Manual Transmission . 3 AUTO 1530 Basic Electrical & Battery .............3 Metropolitan State University ENGL 1711 Composition 1 ......................4 Total Semester Credits . 18 Second Semester AUTO 1441 Alignment & Suspension ..............4 AUTO 1523 Four Wheel Drive Differential ..........3 AUTO 1540 Basic Engine Management ............3 AUTO 1550 Heating & Air Conditioning ...........4 Goal 1: COMM 17XX ..........................3 Total Semester Credits . 17 Third Semester AUTO 2410 Starting & Charging Systems ..........3 AUTO 2420 Electrical Accessories ................3 AUTO 2430 Engine Theory & Repair ..............4 AUTO 2440 Engine Installation ...................2 AUTO 2450 Introduction to Auto Computers .......2 Goal Area 3 or 4 ..............................3 Goal Area 5 ..................................3 Total Semester Credits . 20 Fourth Semester AUTO 2513 Fuel Systems .......................3 AUTO 2520 Engine Drivability ...................3 AUTO 2530 Auto Transmission Theory .............2 AUTO 2542 Auto Tran Diagnosis & Repair ..........4 AUTO 2550 Specialized Lab 1 ...................2 Goal Area 6 ..................................3 Total Semester Credits . 17 Any Semester
Recommended publications
  • Deadlands: Reloaded Core Rulebook
    This electronic book is copyright Pinnacle Entertainment Group. Redistribution by print or by file is strictly prohibited. This pdf may be printed for personal use. The Weird West Reloaded Shane Lacy Hensley and BD Flory Savage Worlds by Shane Lacy Hensley Credits & Acknowledgements Additional Material: Simon Lucas, Paul “Wiggy” Wade-Williams, Dave Blewer, Piotr Korys Editing: Simon Lucas, Dave Blewer, Piotr Korys, Jens Rushing Cover, Layout, and Graphic Design: Aaron Acevedo, Travis Anderson, Thomas Denmark Typesetting: Simon Lucas Cartography: John Worsley Special Thanks: To Clint Black, Dave Blewer, Kirsty Crabb, Rob “Tex” Elliott, Sean Fish, John Goff, John & Christy Hopler, Aaron Isaac, Jay, Amy, and Hayden Kyle, Piotr Korys, Rob Lusk, Randy Mosiondz, Cindi Rice, Dirk Ringersma, John Frank Rosenblum, Dave Ross, Jens Rushing, Zeke Sparkes, Teller, Paul “Wiggy” Wade-Williams, Frank Uchmanowicz, and all those who helped us make the original Deadlands a premiere property. Fan Dedication: To Nick Zachariasen, Eric Avedissian, Sean Fish, and all the other Deadlands fans who have kept us honest for the last 10 years. Personal Dedication: To mom, dad, Michelle, Caden, and Ronan. Thank you for all the love and support. You are my world. B.D.’s Dedication: To my parents, for everything. Sorry this took so long. Interior Artwork: Aaron Acevedo, Travis Anderson, Chris Appel, Tom Baxa, Melissa A. Benson, Theodor Black, Peter Bradley, Brom, Heather Burton, Paul Carrick, Jim Crabtree, Thomas Denmark, Cris Dornaus, Jason Engle, Edward Fetterman,
    [Show full text]
  • Catalogue English
    … a cut above the rest Catalogue English Machines and tools for sheet metal working Standing Seam Roofing Systems Benders www.dracotools.com Modern manufacturing DRÄCO Products have been manufactured in our production in Germany since 1951 Power tools and DRÄCO produces the original double-sided slitter shear system, a standing-seam - complete range of machines for the standing-seam as well as tools and technique equipment for metal roofing and standing seam technology Experience In close collaboration with the user products are manufactured close to the market. For more than 60 years DRÄCO continuous developing its cutting systems Introduced DRÄCO, the brand for rational and practical cutting systems, tools and machines Source of power We are able to deliver user friendly products and in high quality. Our hand-held shears are available in cordless (battery), compressed air (pneumatic) and wired (115/230 Volt). Folding machines, roll forming equipment and profiling machines for façades and roof seam in tin man’ s quality are available in 230V or 115V OEM You will also find DRÄCO products with private labels for other brands Advantage We always have an open ear for practitioners and users benefit when it comes to improvements and innovations, to bring together a product ready for production. As a family business, we’re a strong team. We’re in it to win for and with the costumer! Quality We produce robust quality products at a competitive price. We never settle for the first solution that comes by. Our principle is: things can always be smarter and cheaper International DRÄCO products are sold worldwide in over 60 countries with success Up-to-date and You can find our latest products on the internet at www.dracotools.com informative as well as important tips, technical information and news Max Draenert Apparatebau GmbH & Co.
    [Show full text]
  • Press Release
    Contact: Andrea Brogan Metabo Corp. Phone: (610) 436-5900 1231 Wilson Dr. Fax: (610) 436-9072 West Chester, PA 19380 [email protected] www.metabousa.com PRESS RELEASE Metabo’s New Brushless Cordless Nibbler and Shear For cutting sheet metal quickly and efficiently on curved and straight surfaces October 20, 2020 – West Chester, PA – Metabo Corporation, a leading German international manufacturer of professional-grade cordless and corded hand-held power tools and accessories in the US, introduces two new metalworking tools, an 18V nibbler and 18V shear. “The 18V Nibbler and 18V Shear have the best size to power ratio, slimmest grip and are the fastest cutting in their class among the competition due to Metabo’s 2nd generation brushless motor. These tools are the perfect addition to our expanding line of industry-leading cordless metalworking tools with the most advanced brushless motor and battery technology,” said Terry Tuerk, Metabo’s Senior Product Manager. The Metabo NIV 18 LTX BL 1.6, 18V nibbler, is available as a bare tool (601614850), or in a kit version with 2 - 4.0 LiHD batteries, charger and case (US601614400). A punch, die and combination key are included with the tool. The NIV 18 LTX BL 1.6 includes a speed selector for adjusting the cutting speed according to the material being worked. The nibblers' powerful Metabo brushless motor deliver up to 600- 2,360 strokes per minute. FOR IMMEDIATE RELEASE METABO’S NEW CORDLESS NIBBLER AND SHEAR PAGE 2 The tool can cut through 16-gauge mild steel, 18-gauge stainless steel and 14-gauge aluminum and has a minimum curve radius of 5/8".
    [Show full text]
  • Of Technical Bulletins
    TECHNICAL BULLETINS APRIL 2015 I Rev 1 This issue supersedes all previous issues Index of Technical Bulletins Bulletin Topic Date 1 General Guide to Good Practice in the Use of ZINCALUME® Steel for Roofing & Siding Products April 2015 2 Flashing Materials for Bare & Pre-painted ZINCALUME® Steel April 2015 3 Fastener Selection for ZINCALUME® Steel Roof & Siding Products April 2015 4 Prevention of Damage to ZINCALUME® Steel Roof & Siding Products from Metal Filings April 2015 5 Sealants for ZINCALUME® Steel April 2015 6 Cut Edge Protection of ZINCALUME® Steel April 2015 7 Guidelines for Welding ZINCALUME® Steel April 2015 8 Unsuitable Applications for ZINCALUME® Steel April 2015 9 Guidelines to the Effective Use of ZINCALUME® Plus Steel April 2015 Prevention of Oxide Formation (Black Rust) on ZINCALUME® Steel During Transportation, April 2015 10 Processing and Storage 11 Guidelines for General Field Maintenance of ZINCALUME® Steel Roofing and Siding April 2015 12 Guidelines for the Installation of Photovoltaic Panels with ZINCALUME® Steel April 2015 Hawaiian Islands: Exceptions to Standard Limited Warranty, Cleaning and Panel Design April 2015 13 Recommendations For more information or other questions not addressed by these bulletins please contact Steelscape’s Technical Service Department or your Steelscape Account Manager. TECHNICAL BULLETIN 1 APRIL 2015 I Rev 1 This issue supersedes all previous issues ZINCALUME® Steel General Guide to Good Practice in the Use of ZINCALUME® Steel for Roofing and Siding Products INTRODUCTION product for a specific structure. This is especially true Panels fabricated from ZINCALUME® Steel will provide for the special requirements of severe coastal many years of trouble-free service when properly and industrial as well as animal confinement designed, installed and maintained.
    [Show full text]
  • Sawing Sheet Metal Accurately with a Vertical Bandsaw, Version 1.0
    Sawing Sheet Metal Accurately with a Vertical Bandsaw, Version 1.0 By R. G. Sparber Protected by Creative Commons.1 I needed to cut a series of test samples out of 26-gauge sheet metal. The size was not important, but it had to have straight, parallel sides and 90° corners. My skill with tin snips was not good enough. After trying to perform accurate cuts with power shears and a power nibbler, I settled on my bandsaw in the vertical position. By using a fence and a “sled,” the coupons were fabricated. 1 This work is licensed under the Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/ or send a letter to Creative Commons, PO Box 1866, Mountain View, CA 94042, USA. R. G. Sparber May 22, 2020 Page 1 of 4 I started by using my tin snips to cut a rough strip. Then I used my belt sander to true up the edge. By pressing a parallel against the edge while looking at the gap with a strong light behind it, I can see gaps as small as 0.0001-inches. This straight edge is my reference. I placed it against a fence I erected2 on my bandsaw table. Taking great care to only cut the sheet metal and not my fingers, I made a strip with parallel sides. I went back to my belt sander to deburr. I used my reference edge and a machinist square to scribe cut lines. The piece was then roughly cut out with my tin snips.
    [Show full text]
  • Chapter 4: Metal Structure, Welding & Brazing
    9/27/01 AC 43.13-1B CHG 1 CHAPTER 4. METAL STRUCTURE, WELDING, AND BRAZING SECTION 1. IDENTIFICATION OF METALS 4-1. GENERAL. Proper identification of high temperatures, as this practice will cause the aircraft structural material is the first step the grain structure to enlarge. The length of in ensuring that the continuing airworthiness time required for the soaking temperature de- of the aircraft will not be degraded by making pends on the mass of the metal being treated. an improper repair using the wrong materials. The soaking time is roughly ¼ hour per inch of the diameter of thickness (Ref: Military Tech a. Ferrous (iron) alloy materials are Order (T.O.) 1-1A-9). generally classified according to carbon con- tent. (See table 4-1.) 4-2. IDENTIFICATION OF STEEL STOCK. The Society of Automotive Engi- TABLE 4-1. Ferrous (iron) alloy materials. neers (SAE) and the American Iron and Steel Institute (AISI) use a numerical index system MATERIALS CARBON CONTENT to identify the composition of various steels. Wrought iron Trace to 0.08% The numbers assigned in the combined listing Low carbon steel 0.08% to 0.30% of standard steels issued by these groups repre- sent the type of steel and make it possible to Medium carbon steel 0.30% to 0.60% readily identify the principal elements in the High carbon steel 0.60% to 2.2% material. Cast iron 2.3% to 4.5% a. The basic numbers for the four digit series of the carbon and alloy steel may be b. The strength and ductility, or tough- found in table 4-2.
    [Show full text]
  • Marine Metals Reference
    Marine MetalsMetal BoatReference Quarterly 0.5 0 -0.5 Average Voltage in Seawater -1 -1.5 -2 Magnesium Galvanized Steel Zinc Aluminum Alloys Cadmium Mild Steel; Cast Iron; Wrought Iron HSLA Steel; CorTen Type 304 Stainless (active) Type 316 Stainless (acitve) Inconel Alloy 600 (active) Aluminum Bronze (91%Cu, 7%Al, 2%Fe) Summer 1997Naval Brass; Tobin "Bronze" (60%Cu, 39%Zn) Special Edition Yellow Brass (65% Cu, 35% Zn) Red Brass (85%Cu, 15%Zn) Copper Lead - Tin Solder (50%, 50%) Tin Silicon Bronze (96%Cu) 0.50 Manganese "Bronze" (58%Cu, 39%Zn) 90-10 Copper-Nickel 0.00 Lead 70-30 Copper-Nickel Inconel Alloy 600 (passive) -0.50 Silver-Brazing Alloys Nickel 200 Silver -1.00 Monel Alloy 400 (65%Ni, 30%Cu) Type 304 Stainless (passive) Type 316 Stainless (passive) -1.50 Titanium Graphite -2.00 Metal Boat Quarterly The Metal Boat Society The Metal Boat Quarterly 6251 Goodhew Road PO Box 991 Sedro-Woolley, Wa. 98284 Port Townsend, Wa. 98368 The Metal Boat Society is a volunteer, nonprofit organi- Editor & Publisher: Michael Kasten zation open to anyone sharing its dedication to the interna- tional promotion of metal-hulled boats. Founded in October 1987, the Society’s membership is based in the US, Canada, The Metal Boat Quarterly is published during January, and abroad. April, July, and October, by The Metal Boat Society. President: Pete Silva © 1997 Michael Kasten Vice President: Gary Noble Curtis Secretary: Teri Silva Deadlines for contributions to the Quarterly are the middle of the month prior to publishing, as above. MBQ Treasurer: Carol Parks Classified Ads have the same deadline.
    [Show full text]
  • Sheet Metal Nibbler Cutter
    YOIYEE [email protected] www.yoiyee.com SHEET METAL NIBBLER CUTTER Thank you for your purchase. Please read this instruction carefully before operation. Warning Please do not cut the sheet thicker than stipulated below. Do not use the tool beyond the operating scope herein. Do not use the tool under unusual circumstances to avoid any possible accident. Do not change any inner structure or reassemble the tool without the advice of the manufacturer. 1 YOIYEE [email protected] www.yoiyee.com CHARACTERISTIC • Unique convenience and durability. • Excellent cutting speed by 2 meter per minute with 3000PRM. • Best cutting result without any burrs at the cutting edges. • 360-degree changeable direction at operation. • To be fitted with any electric drill or power drill with 3000RPM. • Different cutting shapes available. NOTE Tighten any screw before using the tool. Never start operation before the motor runs. Keep a vertical angle of the cutting bit to the sheet. Release the bit in operation while the motor is still running. Please use special bit-cooling oil at operation. CAPACITY For the best performance, please follow the following stipulated thickness of the sheet plate Material Type Iron Plate Stainless Steel Plate Copper or Aluminum Plate Plastic or Plywood Thickness (Max) 1.8mm 1.2mm 2.0mm 2.0mm OPERATION 1. Fasten the plate to be cut on to an operating platform. 2. Fit the tool with an electric drill or any power drill by fastening the drill chuck. 2 YOIYEE [email protected] www.yoiyee.com 3. Operate the tool when the motor runs. 4. Release the cutting bit when the motor keeps running.
    [Show full text]
  • Arc Welding of Nonferrous Metals Arc Welding of Nonferrous Metals
    Arc Welding of Nonferrous Metals Arc Welding of Nonferrous Metals Published by The Arc Welding of Nonferrous Metals KOBE STEEL, LTD. is a textbook for providing information to assist welding personnel study © 2015 by KOBE STEEL, LTD. the arc welding technologies commonly 5-912, Kita-Shinagawa, Shinagawa-Ku, applied in the equipment made from Tokyo, 141-8688 Japan aluminum, aluminum alloys, copper, copper alloys, nickel, and nickel alloys. All rights reserved. No part of this book may be reproduced, Reasonable care is taken in any form or by any means, without in the compilation and publication of permission in writing from this textbook to insure authenticity of the publisher the contents. No representation or warranty is made as to the accuracy or reliability of this information. Forewords Nonferrous metals are non-iron-based metals such as aluminum and aluminum alloys, copper and copper alloys, nickel and nickel alloys, titanium and titanium alloys, and magnesium and magnesium alloys. Today, nonferrous metals are used in various welding constructions for diverse industrial applications. However, their weldability is quite different from that of steel, due to specific physical and metallurgical characteristics. Therefore, the welding procedure for nonferrous metals should be thoroughly examined taking into account the inherent characteristics of the particular nonferrous metal to be welded, in order to get sound weldments. This textbook focuses on the arc welding of aluminum, aluminum alloys, copper, copper alloys, nickel, and nickel alloys that are used more extensively over other nonferrous metals for industrial applications. This textbook consists of three chapters: Chapter 1: Arc Welding of Aluminum and Aluminum Alloys Chapter 2: Arc Welding of Copper and Copper Alloys Chapter 3: Arc Welding of Nickel and Nickel Alloys iii Chapter 1 Arc Welding of Aluminum and Aluminum Alloys Contents Introduction 2 1.
    [Show full text]
  • Tools for the Chassis and the Printed Circuit Board
    ToolsTools AndAnd TechniquesTechniques Copyright 2004 D. L. Gould & Niagara College NiagaraNiagara CollegeCollege -- TechnTechnoolloogygy JudgedJudged ByBy YourYour ToolsTools ● Your choice and care of the tools you select for the mechanical and electrical work you do will reflect your work habits ● Select tools that are of good quality with life time warranties. ● Never substitute one tool for another. ScrewdriversScrewdrivers Blade Shank Insulated Fluted Handle ● CommCommonon types:types: (manual & power) BladeBlade PhillipsPhillips AllAlleenn TorxTorx RobertsonRobertson ● Alignment between the screwdriver and the head of the screw must be exact ScrewdriversScrewdrivers Blade Insulated Fluted Handle Shank ● VariVariatiatioons:ns: JewelJewelersers StubbyStubby OffsetOffset MagneticMagnetic RatchetRatchet ● Shank, driver style & size, may also vary. NutdriversNutdrivers Shank Insulated Handle ● CommCommonon StylesStyles: (manual & power) HollowHollow ShaftShaft MagneticMagnetic InsertInsert WrenchesWrenches Insulated Handle ● AdjustableAdjustable - distance between the jaws can be adjusted to various sizes. The pulling force is always applied to the stationary jaw. ● OpenOpen--EnEndd - primarily used on square nuts. Allows adjustments to be made in confined areas. ● BoxBox--EndEnd - minimizes shearing or rounding providing a snug grip on hex hardware. ● AllenAllen WrenchWrench - a hexagonal bar of steel which fits the socket of a screw or bolt. Insulated Handle PliersPliers Insulated Handle ● LongLong--NoseNose - positioning of small parts
    [Show full text]
  • Common Hand Tools
    Common Hand Tools Lesson 1: Common Hand Tools for Common Measurement Tools Woodworking Measurement tools are used to ensure accuracy and Before beginning a woodworking project, workers must consistency of a project. They are used for determining be familiar with shop safety rules and knowledgeable linear measurements such as length and width and area about common hand tools. Hand tools are usually measurements such as square feet. They are also used used for smaller projects or where power tools or for checking if work is square or level. Some common machines would be inefficient. For example, when measurement tools are as follows. The basics are smoothing a small piece of lumber, a hand plane is introduced here and more information is provided more practical than a power plane. An agricultural in Unit III, Lesson 1: Common Measurements and mechanics shop should have a good selection of hand Measurement Tools. tools to accommodate a large variety of woodworking projects. A tape measure is typically used for making straight measurements and taking measurements around Basic Shop Safety Procedures objects (circumference). Tape measures are available that use the U.S. customary system, metric system, and The following are general safety procedures that apply a combination of the two systems. See Figure 1.1. to almost every work situation. • Adhere to instructions. o Read labels and warnings on containers and tools. Figure 1.1 - Tape Measures o Follow the manufacturer’s recommendations for use and maintenance of a specific tool. o Pay attention to signs posted in the work area. o Follow the instructor’s directions.
    [Show full text]
  • Power Tools Whitton Supply
    Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Power Tools Lenox Portable Band saw Blades Part # Length Width Thickness TPI 3-878-12-10/14L 3' 8-7/8" 1/2" 0.025 10/14 3-878-12-14/18L 3' 8-7/8" 1/2" 0.025 14/18 3-878-12-14/18S 3' 8-7/8" 1/2" 0.025 14/18 3-878-12-14BM 3' 8-7/8" 1/2" 0.025 14 3-878-12-18BM 3' 8-7/8" 1/2" 0.025 18 3-878-12-24BM 3' 8-7/8" 1/2" 0.025 24 Cut-Off Bosch B1364 12" Abrasive Cutoff Machine Part # Amps Cutting Depth Max HP RPM Spindle Lock Spindle Rating Thread B1364 15 3-7/8" 4.7 5000 Yes 5/8"-11 120v AC/DC Service After the Sale 1 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Power Tools Cut-Off Bosch B1364K 12" Abrasvie Cutoff Machine Kit Part # Amps Cutting Depth Max HP RPM Spindle Lock Spindle Rating Thread B1364K 15 3-7/8" 4.7 5000 Yes 5/8"-11 120v AC/DC B1365 14" Abrasive Cutoff Machine Part # Amps Cutting Depth Max HP RPM Spindle Lock Spindle Rating Thread B1365 15 4-7/8" 4.7 4300 Yes 5/8"-11 120v AC/DC Service After the Sale 2 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Power Tools Nibblers Bosch B1529B 18 Gauge Nibbler Part # Amps Cutting Alum. Cutting Mild Steel Stainless SPM Voltage Radius Cap Cutting Cap.
    [Show full text]