Audio Kontrol 1
Total Page:16
File Type:pdf, Size:1020Kb
AUDIO KONTROL 1 Operation Manual The information in this document is subject to change without notice and does not represent a commitment on the part of NATIVE INSTRUMENTS GmbH. The software described by this document is subject to a License Agreement and may not be copied to other media. No part of this publication may be copied, reproduced or otherwise transmitted or recorded, for any purpose, without prior written permission by NATIVE INSTRUMENTS GmbH, hereinafter referred to as NATIVE INSTRUMENTS. All product and company names are trademarks of their respective owners. Furthermore, the fact that you are reading this text means you are the owner of legal version rather than an illegal, pirated copy. It is only through the loyalty and honesty of people like yourself that NATIVE INSTRUMENTS GmbH can continue to develop and create innovative audio software. On behalf of the entire company, thank you very much. Users Guide written by Nicolas Sidi. Special thanks to the Beta Test Team, who were invaluable not just in tracking down bugs, but in making this a better product. © Native Instruments GmbH, 2006. All rights reserved. Germany USA NATIVE INSTRUMENTS GmbH NATIVE INSTRUMENTS North America, Inc. Schlesische Str. 28-30 5631 A Hollywood Boulevard D-10997 Berlin Los Angeles, CA 90028 Germany USA [email protected] [email protected] www.native-instruments.de www.native-instruments.com Table Of Contents 1. Welcome to AUDIO KONTROL 1! ..................................................... 5 2. Safety Considerations ..................................................................... 6 3. Parts of the Product ....................................................................... 8 3.1. Hardware ................................................................................. 8 3.2. Software ................................................................................13 4. Setup ..........................................................................................16 4.1. Hardware ................................................................................16 4.2. AUDIO KONTROL 1 Software Installation .................................. 20 4.3. Configuring Third-Party Software .............................................. 23 5. Quickstarts .................................................................................. 25 5.1. Playing XPRESS KEYBOARDS from a MIDI keyboard ...................25 5.2. Controlling TRAKTOR 3 LE ...................................................... 28 5.3. Playing a Guitar Riff with GUITAR COMBOS .............................. 33 5.4. Remote Controlling Winamp/iTunes ........................................... 39 6. Use Cases ....................................................................................41 6.1. Recording Vocals .....................................................................41 6.2. Controlling a Sequencer - Creating Assignments with Key Commands ................................ 46 6.3. Controlling a Synthesizer – Creating Assignments with MIDI Commands ...............................51 7. Software Reference .......................................................................57 7.1. The Driver ...............................................................................57 7.2. The Driver Control Panel ...........................................................57 7.3. Remote Control Basic Concepts ................................................ 59 7.4. The Mapping Application ......................................................... 65 7.5. Add-on Software ......................................................................76 8. Optimizing and Troubleshooting ......................................................76 8.1. Hardware Troubleshooting .........................................................76 8.2. How to check if the driver is installed correctly? ......................... 77 8.3. How to use the remote control function? ....................................79 8.4. How to avoid Ground Loops ..................................................... 80 8.5. How to Use AUDIO KONTROL 1 with a Laptop ...........................81 9. Appendix..................................................................................... 84 9.1. Technical Specifications and Block Diagram .............................. 84 9.2 MIDI CC Table......................................................................... 87 Index ...............................................................................................91 AUDIO KONTROl 1 – 3 4 – AUDIO KONTROL 1 1. Welcome to AUDIO KONTROL 1! Thank you very much for choosing AUDIO KONTROL 1! Equipped with high end digital/analog converters, AUDIO KONTROL 1 combines versatile audio input and output slots that fit seamlessly into your setup. AUDIO KONTROL 1 also provides MIDI connection capacities as well as freely assignable controllers on the hardware’s top panel: It is the tactile interface to your software. AUDIO KONTROL 1 provides two inputs and four outputs that allow you to use the hardware flexibly within a variety of setups. For instance, you can connect a microphone and record a voice, and at the same time you can record a guitar or trigger virtual instruments with your MIDI keyboard. Alternatively you can use AUDIO KONTROL 1 to listen to two completely independent stereo signals, a feature that is needed for DJ applications such as Traktor DJ Studio 3. The NATIVE INSTRUMENTS software that is included with AUDIO KONTROL 1 provides everything you need to start using your audio interface instantly. TRAKTOR 3 LE is a fully-featured digital DJ solution, the GUITAR COMBOS can be used immediately with your guitar or bass plugged into AUDIO KONTROL 1’s instrument input and the XPRESS KEYBOARDS offer three outstanding synthesizers – all conveniently playable with your master keyboard. Last but not least, AUDIO KONTROL 1 offers three buttons and a controller knob on the hardware’s top panel. You can assign any key command or MIDI message to actions performed with these elements. This turns AUDIO KONTROL 1 into a versatile controller that allows you to touch your software, be it one of the included applications, your favorite sequencer, your graphics software or other media applications such as Winamp or iTunes. Setup files for popular programs ensure the use of these features is hassle-free. This manual will help you use all the features of AUDIO KONTROL 1. It is divided into three parts: • Chapters 3 and 4: The first part explains how to setup your AUDIO KONTROL 1 quickly. It describes the different parts of the product and guides you through the installation process. • Chapters 5 and 6: The second part illustrates different practical situations, from the simplest setup to more complex configurations. This learning-by-doing approach will familiarize you with AUDIO KONTROL 1’s concept. • Chapters 7 and 8: The third part gives you a detailed reference about the software interface and its operation. Reading this section will give you a full understanding of this great tool. It also contains a section about optimization and troubleshooting. AUDIO KONTROL 1 – 5 2. Safety Considerations Warning • Before using the AUDIO KONTROL 1 hardware, please read the manual and pay special attention to the instructions below. • The AUDIO KONTROL 1 hardware contains no user-serviceable parts. Do not open it or attempt to disassemble or modify any internal hardware. If there appears to be a hardware malfunction, immediately stop using the controller and have it inspected by qualified service personnel. • Do not expose the unit to rain, and do not use it near water or in damp or wet conditions. Also, never place anything on top of the controller, and be very careful that no objects or liquids of any kind enter the unit. • This product, in combination with an amplifier, headphones or speakers, can produce sound levels capable of damaging your ears. Do not use it for long periods of time at high volume levels. If you experience any hearing problems or ringing in the ears, consult a hearing specialist immediately. • The AUDIO KONTROL 1 hardware is powered by the USB bus. Operation can be guaranteed only as a single device with a USB2 controller or with a self-powered USB2 hub. Caution • Before connecting the AUDIO KONTROL 1 hardware to other electronic components, turn off the power for all devices. Before powering your system up or down, set all volume levels to minimum. Gradually raise the volume controls while playing your instruments to set the desired listening level. • Do not place the AUDIO KONTROL 1 hardware in an unstable position where it might accidentally fall to the ground. • Before moving the AUDIO KONTROL 1 hardware, remove all connected cables. 6 – AUDIO KONTROL 1 • Never subject the unit to extreme temperatures (e.g., direct sunlight in an enclosed vehicle, or near a heat source), or high levels of vibration. • Do not use excessive force on the buttons, knobs, switches or connectors. • When cleaning the AUDIO KONTROL 1 hardware, use a soft, dry cloth. Do not use paint thinner, solvents, cleaning fluids, or chemically- impregnated wiping cloths. Important Notes • Disclaimer: Native Instruments GmbH cannot be held responsible for damage or data loss caused by improper use of, or modification to, the AUDIO KONTROL 1 hardware or software. It is your responsibility to back up data you don’t want to lose. • Specifications subject to change: The information contained in this manual is believed to be correct at the time