SAHAND UNIVERSITY of TECHNOLOGY Tabriz-IRAN

Total Page:16

File Type:pdf, Size:1020Kb

SAHAND UNIVERSITY of TECHNOLOGY Tabriz-IRAN SAHAND UNIVERSITY OF TECHNOLOGY Tabriz-IRAN www.sut.ac.ir Content Facts and Figures , 2 President’s message, 3 Faculty of Materials Engineering, 5 Faculty of Chemical Engineering, 8 Faculty of Mining Engineering, 11 Faculty of Electrical Engineering, 14 Faculty of Biomedical Engineering, 17 Faculty of Civil Engineering, 20 Faculty of Basic Sciences,23 Faculty of Polymer Engineering, 26 Faculty of Mechanical Engineering, 29 Faculty of Petroleum and Natural Gas Engineering, 32 Faculty of E-Learning & Center of Open Training, 36 Central Library, 38 Interna�onal Affairs, 40 Sahand University of Tecnology 1 Sahand University of Tecnology Facts and Figures History and rank In�rastructures Young Successful University in the age of 30th. Campus University: 3 campuses in 3 loca�ons First Technology University in North-West of Iran 11 Academic Facul�es 2 Research Ins�tutes US-News & World report 32 Research Centers (in Educa�on system in 2020) 1 Center of Excellence Ranked #1299 More than 100 Educa�onal and Research Laboratories 3 Dormitories Shanghai Ranking 2019 5 Student and 2 Staff Catering (the Academic Ranking of World Universi�es) Public Restaurant 151-200 top Universi�es in Metallurgy Engineering Central Library with two satellite branches 301- 400 top Universi�es in Chemical Engineering (> 100,000 books and on-line resources) 401-500 top Universi�es in Energy Indoor and Outdoor Sport Complex Science and Engineering Student community URAP ranking 2019-2020. 493 PhD students (University Ranking by Academic Performance) 1497 MSc students Ranked #1425 2556 BSc students Ranked # 29 among Iranian Universi�es 64 As students. Total: 4592 ISC Student/Professor ra�o: 26/1 (islamic world science cita�on center) Ranked # 7 among Iranian Technical Universi�es Alumni 240 PhD, 3657 MSc, 5841 BSc, 518 As Employability rate : 100% PhD, 93% MSc and 87 BSc Academic Members and Staff 43/43/87/7 Full/Associate/Assistant Professor Innova�on and incuba�on center 169 Staff 13 start-up companies 349 Total 30 spin-out companies 14 technology transfer companies Sahand University of Tecnology 2 President’s message Sahand University of Technology (SUT) was established in 1989 in Tabriz, the capital of art and technology in Iran. SUT is a State university opera�ng under the rules of the Ministry of Science, Research and Technology of Islamic Republic of Iran with integrated and sophis�cated campus facili�es. The academic ac�vi�es of SUT are conducted in three campuses including Sahand Campus located in Sahand new town 25 km of Tabriz in an area of 400 hectares comprised of central manage- ment, administra�on, educa�onal and research units and academic facul�es, Tabriz Campus located in industrial part of Tabriz, comprised of Electronic Learning Center, Technology Incuba�on Center including spin-out companies and Open Training Center, and Varzeqan Campus, so called Varzeqan Technical College located in Varzeqan in the vicinity of Sungun copper mine located in 97 km of Tabriz, offering technology and engineering educa�on. SUT operates academic facul�es and research ins�tutes and centers to provide educa�on and research ac�vi�es. SUT offers over 20 BSc programs and more than 100 graduate programs of study in engineering, science and technology. More than half of students are enrolled in post-graduate courses. Our 190 outstanding mostly young academic staff along with a few thousand research associates, post-doctoral and post-graduate students conduct research in 32 research centers in various areas including Oil and Gas, Nanotechnology, Renewable Energy, ICT, Environment, Biotech- nology, Mineral Processing, Advanced Materials, Structures, Automo�ve, Medical Engineering and Produc�vity and have been able to performing finalized or in progress research projects with an overall number of more than 400. I would like to say that SUT is proud of being the first organiza�on to ini�ate the crea�on of self-funded demand-driven research centers being independent of the government funds. In this regard, the research ac�vi�es are funded solely through one-to-one contracts with various industries and companies. 3 Sahand University of Tecnology Towards the 4th genera�on university, the Innova�on and Entrepreneurship Center, in the frame- work of student team-works, empowers students with required skills. SUT has taken ac�on by leveraging university's growth and innova�on center establishing 30 spin-out technology companies, 12 of which have become knowledge-based corpora�ons. In addi�on, SUT’s significant prac�cal technology-based par�cipa�on has been realized in the major na�onal projects of oil recovery in Soroush oil field, nano and biotechnology products and water purifica�on. Furthermore, SUT’s academic staff and students have been awarded many na�onal and interna�on- al prizes and dis�nc�ons including Energy Globe World award, Green Produc�vity Specialist of APO, the country top professor award in years 2010 and 2018, the country top researcher award in Years 2011 and 2017, the Iranian academy of science dis�nguished young researcher awards in years 2011 and 2017, membership of 7 faculty members in specialized higher educa�on commi�ees of the country, as well as numerous student rewards received by student teams in na�on-wide science and sport compe��ons. More recently, SUT appreciate interna�onal scien�fic collabora�on via either enhancing or launch- ing memorandum of understanding with foreign universi�es in order to establish the framework of admi�ng interna�onal students, and conduc�ng joint research projects amongst science and technology disciplines. Prof. Ahmad-Reza Mostafa Gharabaghi, PhD President of Sahand University of Technology Sahand University of Tecnology 4 Faculty of Materials Engineering Faculty of Materials Engineering, Sahand University of Technology, 5133511996, Tabriz, Iran Telephone number:+984133459458 Fax Number: +984133444334 Email: [email protected] Website: h�p://mae.sut.ac.ir/ 5 Sahand University of Tecnology Introduc�on The Faculty of Materials Engineering at Sahand University of Technology was founded in 1990 and is the oldest and most famous faculty of Materials Science and Engineering in northwest of Iran. At present, the faculty consists of 18 full-�me academic members including 8 Full Professors, 3 Associ- ate Professors and 7 Assistant Professors. More than 330 undergraduate and 300 graduate students are enrolled in BSc course of Metallurgy Engineering, MSc courses of NanoMaterials, Corrosion, Extrac�on metallurgy, Foundry and Cas�ng, Welding and Materials’ Selec�on and Characteriza�on and PhD course of Materials Science and Engineering in this faculty. Materials is a research leading faculty with dis�nguished publica�ons and research outcomes worldwide. This faculty was ranked among top 151-200 in the world in the Metallurgy Engineering subject in 2019 by ShanghaiRanking (the Academic Ranking of World Universi�es). Undergraduate Course Structure Major 1st year 2nd year 3rd year 4th year Metallurgical General Calculus I, II Physical Proper�es of Materials I, II Kine�cs in Materials Engineering Powder Metallurgy Engineering General Physics I, II Engineering Mathema�cs Electrochemistry Project Crystallography and Lab. Basics of Electrical Engineering Metals Forming I Industrial Internships Sta�cs Materials Mechanical Proper�es I Ceramics and Refractory Materials Surface Engineering Physics Lab. Materials Thermodynamics Welding Materials Analysis Techniques General Chemistry Lab. Principle of Metals Solidifica�on and Heat Treatment Lab. Selec�on of Engineering Physical Educa�on I cas�ng Hydrometallurgy Materials Basics of Electrical Engineering Lab. General Chemistry Metallography Lab. Non-Destruc�ve Tests Transport Phenomena Industrial Drawing Differen�al Equations Non-Ferrous Alloys Corrosion and Protection of Metals General Workshop Mechanics of Material Composites Mechanical Proper�es Lab. I History of Materials Engineering Physical Chemistry Produc�on of Non-Ferrous Pyrometallurgy and Metallurgy Computer Programming Metals Mechanical Proper�es II Metals Produc�on Lab. Cast Iron and Steel Cas�ng Scien�fic Communica�on Skills Heat Treatment Numerical Analysis Solidification and Cas�ng Lab. Graduate Programs Research Centers Research Center of Advanced Materials & MSc program PhD program Mineral Processing (RCAM) • Characteriza�on and Selec�on of • Materials Engineering Nanostructured Materials Research Center Engineering Materials • Corrosion and Protec�on of Metals • Cas�ng • Nano-Materials • Welding • Sahand University of Tecnology 6 Research Laboratories Metallography Lab. Mechanical Proper�es Lab. Heat Treatment Lab. Materials Forming Lab. Materials Characteriza�on (SEM-XRD-DSC) Lab. Extrac�ve Metallurgy Lab. Corrosion and Coa�ngs Lab. Nano-Materials Lab. Welding Lab. Research Facili�es Scanning Electron Microscope Vacuum Induc�on Mel�ng X-Ray Diffrac�on Induc�on Mel�ng (100 Kg) Differen�al Scanning Calorimetry Complete Cas�ng Sand Tes�ng equipment Op�cal Microscopes and Metallography equipment Welding Rec�fiers (AC, DC) Universal Tensile Test (3 devise-2, 5 and 10 tons) Welding Machines - MIG/MAG – TIG Fa�gue test Submerged-arc welding Universal Hardness Test Spot Resistance Welding Microhardness test Fric�on S�r Welding /Processing Charpy Impact test UV-Visible Spectrophotometer Heat Treatment Furnaces (atmosphere control, Poten�ostat/Galvanostat Electrochemical Instru- under vacuum, different temp. up to 1700 ᵒC) ment (3 different brands) Freeze Dryer Hydraulic Press (5, 100, and 200 tons) Ovens (up to 300 ᵒC, Under Vacuum) Rolling Mill Machine Dis�nc�on Shanghai Ranking 2019 (the Academic Ranking of World Universi�es) 151-200 top Universi�es in Metallurgy Engineering 7 Sahand University of Tecnology Faculty of Chemical Engineering East Azarbaijan, Tabriz, Sahand New Town, Sahand University of Technology, Faculty of Chemical Engineering Telephone number: 041-33459152 Fax Number: 041-33444356 Email: chemoffi[email protected] Website: h�p://fa.che.sut.ac.ir Sahand University of Tecnology 8 Introduc�on As part of the first and largest Iranian technical university in the west-northern of I.R. Iran, Faculty of Chemical Engineering has started its educa�onal ac�vi�es since 1992 by admi�ng BSc students in Petrochemical industry major.
Recommended publications
  • Polymer Processing and Manufacturing Engineer Nushores
    Polymer Processing and Manufacturing Engineer NuShores’ mission is to improve the quality of life for people globally while competing successfully by applying its licensed and internally developed advanced materials portfolio to the Biomaterials industry. NuShores has exclusive global license to patented bone and tissue regeneration technologies developed at University of Arkansas – Little Rock from over $12M in research. We are seeking a Polymer Processing and Manufacturing Engineer to Join our growing team to launch NuCress™ scaffold product family, our award-winning bone void filler line of medical device products. If working with a smart and creative team that designs and builds products that improve quality of life interests you, then consider a career with us. Job Type. Full-time professional employee. Reports To. The Polymer Process and Manufacturing Engineer will report to Chief Technical Officer, Chief Scientist or Product Manager. Salary. Competitive, with benefits. Job Overview. The Polymer Processing and Manufacturing Engineer will be the technical lead for new and existing processes that involve the integration of polymeric biomaterials to biological systems and products such as artificial bone and tissue medical devices. This role is responsible for concept development, equipment design and installation, vendor management, and process development and optimization for small to large-scale manufacturing readiness. A key focus for the Polymer Processing and Manufacturing Engineer is to lead process engineering to create and maintain a manufacturing line/facility. Additionally he/she will provide technical subject matter expertise in polymer structure-property relationships, catalyst, polymerization and to develop and maintain know-how and intellectual property within their relevant area of expertise to support regulatory and business objectives and sustain future growth.
    [Show full text]
  • Research Progress on Conducting Polymer-Based Biomedical Applications
    applied sciences Review Research Progress on Conducting Polymer-Based Biomedical Applications Yohan Park 1, Jaehan Jung 2,* and Mincheol Chang 3,4,5,* 1 School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA; [email protected] 2 Department of Materials Science and Engineering, Hongik University, Sejong 30016, Korea 3 Department of Polymer Engineering, Graduate School, Chonnam National University, Gwangju 61186, Korea 4 School of Polymer Science and Engineering, Chonnam National University, Gwangju 61186, Korea 5 Alan G. MacDiarmid Energy Research Institute, Chonnam National University, Gwangju 61186, Korea * Correspondence: [email protected] (J.J.); [email protected] (M.C.); Tel.: +82-62-530-1771 (M.C.) Received: 23 February 2019; Accepted: 10 March 2019; Published: 14 March 2019 Abstract: Conducting polymers (CPs) have attracted significant attention in a variety of research fields, particularly in biomedical engineering, because of the ease in controlling their morphology, their high chemical and environmental stability, and their biocompatibility, as well as their unique optical and electrical properties. In particular, the electrical properties of CPs can be simply tuned over the full range from insulator to metal via a doping process, such as chemical, electrochemical, charge injection, and photo-doping. Over the past few decades, remarkable progress has been made in biomedical research including biosensors, tissue engineering, artificial muscles, and drug delivery, as CPs have been utilized as a key component in these fields. In this article, we review CPs from the perspective of biomedical engineering. Specifically, representative biomedical applications of CPs are briefly summarized: biosensors, tissue engineering, artificial muscles, and drug delivery.
    [Show full text]
  • POLYMER-PLASTICS TECHNOLOGY and ENGINEERING June 1999 Aims and Scope
    rJ 31 CY Ls dM F4 B cnY 0 cc z=8 OE 0 U POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING June 1999 Aims and Scope. The joumal Polymer-Plastics Technology and Engineering will provide a forum for the prompt publication of peer-reviewed, English lan- guage articles such as state-of-the-art reviews, full research papers, reports, notes/communications, and letters on all aspects of polymer and plastics tech- nology that are industrial, semi-commercial, and/or research oriented. Some ex- amples of the topics covered are specialty polymers (functional polymers, liq- uid crystalline polymers, conducting polymers, thermally stable polymers, and photoactive polymers), engineering polymers (polymer composites, polymer blends, fiber forming polymers, polymer membranes, pre-ceramics, and reac- tive processing), biomaterials (bio-polymers, biodegradable polymers, biomed- ical plastics), applications of polymers (construction plastics materials, elec- tronics and communications, leather and allied areas, surface coatings, packaging, and automobile), and other areas (non-solution based polymerization processes, biodegradable plastics, environmentally friendly polymers, recycling of plastics, advanced materials, polymer plastics degradation and stabilization, natural, synthetic and graft polymerskopolymers, macromolecular metal com- plexes, catalysts for producing ultra-narrow molecular weight distribution poly- mers, structure property relations, reactor design and catalyst technology for compositional control of polymers, advanced manufacturing techniques and equipment, plastics processing, testing and characterization, analytical tools for characterizing molecular properties and other timely subjects). Identification Statement. Polymer-Plastics Technology and Engineering is pub- lished five times a year in the months of February, April, June, September, and November by Marcel Dekker, Inc., P.O. Box 5005, 185 Cimarron Road, Monti- cello, NY 12701-5185.
    [Show full text]
  • Department Wise Specialization
    Department wise Specialization 1 Applied Geology: Petroleum Geology, Coal Geology, Structural Geology, Mathematical Geology, Geostatistics, Sedimentology and Sequence Stratigraphy, Geomorphology, Quaternary Geology, Neotectonics, Paleontology, Organic Geochemistry, Igneous, Metamorphic Petrology, Marine Geology, Economic Geology, Mineral Exploration, Engineering Geology, Hydrogeology, Remote Sensing and GIS, Nanotechnology in Geosciences, Artificial Intelligence (AI) and Machine Learning (ML) in Geosciences. 2 Applied Geophysics: Earth and Planetary Science, Gravity and Magnetic Methods, Geophysical Signal Processing, Seismic Methods, Well Logging, Electromagnetic Methods, Electrical Methods, Remote Sensing, Seismology, Magneto-telluric Methods, Atmospheric Sciences, Marine Geophysics and Physical Oceanography. 3 Chemical Engineering: Process Systems Engineering and Control, Transport and Separation Processes Modelling and Simulation, Chemical Engineering Thermodynamics, Petroleum Refining and Petrochemicals, Polymer Engineering, Energy Systems Engineering, Coal to Chemicals, Process Integration, Process and Equipment Design, Molecular Simulation, Electrochemical Engineering Membrane Science & Engineering, Industrial, Occupational & Process Safety, Advance Materials, Colloids & Interface Science, Multiphase Reactors 4 Chemistry: Physical Chemistry, Theoretical Chemistry, Computational Chemistry, Medicinal Chemistry, Organic Chemistry, Inorganic Chemistry, Analytical Chemistry, Biochemistry, Pharmaceutical Science / Engineering. 5 Civil
    [Show full text]
  • Glossary of Materials Engineering Terminology
    Glossary of Materials Engineering Terminology Adapted from: Callister, W. D.; Rethwisch, D. G. Materials Science and Engineering: An Introduction, 8th ed.; John Wiley & Sons, Inc.: Hoboken, NJ, 2010. McCrum, N. G.; Buckley, C. P.; Bucknall, C. B. Principles of Polymer Engineering, 2nd ed.; Oxford University Press: New York, NY, 1997. Brittle fracture: fracture that occurs by rapid crack formation and propagation through the material, without any appreciable deformation prior to failure. Crazing: a common response of plastics to an applied load, typically involving the formation of an opaque banded region within transparent plastic; at the microscale, the craze region is a collection of nanoscale, stress-induced voids and load-bearing fibrils within the material’s structure; craze regions commonly occur at or near a propagating crack in the material. Ductile fracture: a mode of material failure that is accompanied by extensive permanent deformation of the material. Ductility: a measure of a material’s ability to undergo appreciable permanent deformation before fracture; ductile materials (including many metals and plastics) typically display a greater amount of strain or total elongation before fracture compared to non-ductile materials (such as most ceramics). Elastic modulus: a measure of a material’s stiffness; quantified as a ratio of stress to strain prior to the yield point and reported in units of Pascals (Pa); for a material deformed in tension, this is referred to as a Young’s modulus. Engineering strain: the change in gauge length of a specimen in the direction of the applied load divided by its original gauge length; strain is typically unit-less and frequently reported as a percentage.
    [Show full text]
  • Alternative Tissue Engineering Scaffolds Based on Starch: Processing Methodologies, Morphology, Degradation and Mechanical Properties
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by Universidade do Minho: RepositoriUM Materials Science and Engineering C 20 (2002) 19–26 www.elsevier.com/locate/msec Alternative tissue engineering scaffolds based on starch: processing methodologies, morphology, degradation and mechanical properties M.E. Gomes*, J.S. Godinho, D. Tchalamov, A.M. Cunha, R.L. Reis Department of Polymer Engineering, University of Minho, Campus de Gualtar, 4710-057 Braga, Portugal Abstract An ideal tissue engineering scaffold must be designed from a polymer with an adequate degradation rate. The processing technique must allow for the preparation of 3-D scaffolds with controlled porosity and adequate pore sizes, as well as tissue matching mechanical properties and an appropriate biological response. This communication revises recent work that has been developed in our laboratories with the aim of producing 3-D polymeric structures (from starch-based blends) with adequate properties to be used as scaffolds for bone tissue engineering applications. Several processing methodologies were originally developed and optimised. Some of these methodologies were based on conventional melt-based processing routes, such as extrusion using blowing agents (BA) and compression moulding (combined with particulate leaching). Other developed technologies included solvent casting and particle leaching and an innovative in situ polymerization method. By means of using the described methodologies, it is possible to tailor the properties of the different scaffolds, namely their degradation, morphology and mechanical properties, for several applications in tissue engineering. Furthermore, the processing methodologies (including the blowing agents used in the melt-based technologies) described above do not affect the biocompatible behaviour of starch-based polymers.
    [Show full text]
  • Michael R. Bockstaller
    Michael R. Bockstaller Professor, Department of Materials Science & Engineering, Carnegie Mellon University, Pittsburgh PA 15213. Phone: (412) 268-2709; Fax: (412) 268-7247; E-mail: [email protected] Professional Preparation University of Karlsruhe, Karlsruhe (Germany) Chemistry (Diplom) 1990-1996 Johannes Gutenberg University, Mainz (Germany) Chemistry (Dr. rer. nat.) 2000-2005 Postdoctoral Associate, MIT, Cambridge MA Mat. Sci. & Eng. 2000-2004 Lecturer, RWTH Aachen, Aachen (Germany) Chemistry 2004-2005 Appointments 07/14 – present Professor, Department of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, PA 15213 03/11 – present Adjunct Professor, Department of Chemistry, Carnegie Mellon University, Pittsburgh, PA 15213 07/10 – 06/14 Associate Professor, Department of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, PA 15213 4/05 – 05/10 Assistant Professor, Department of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, PA 15213 3/04 – 3/05 Emmy-Noether Research Group Leader, Department of Technical and Macromolecular Chemistry, RWTH Aachen University, Aachen (Germany) 7/00 – 2/04 Postdoctoral Associate, Department of Materials Science and Engineering, MIT, Cambridge, 02139 MA 4/99 – 12/99 Visiting Scientist, Foundation of Research and Technology Hellas - Institute for Electronic Structure and Laser Technology, Iraklion (Greece) 1/98 – 12/98 Teaching Assistant, Dept. of Chemistry., Johannes Gutenberg University, Mainz (Germany) 9/97 – 7/00 Research Assistant, Max-Planck Institute for Polymer Research, Mainz (Germany) Awards and Honors 2014 Fellow of the American Physical Society 2008 The Philbrook Prize (by the Department of Materials Science and Engineering) 2003 Emmy Noether grant recipient of the German Science Foundation 2000 Feodor-Lynen fellowship award by Alexander von Humboldt Foundation Membership and Activities in Honorary Fraternities, Professional Societies 1.
    [Show full text]
  • Optical Characterization and Properties of Polymeric Materials for Optoelectronic and Photonic Applications
    International Journal of Applied Science and Technology Vol. 3 No. 5; May 2013 Optical Characterization and Properties of Polymeric Materials for Optoelectronic and Photonic Applications A. N. Alias Z. M. Zabidi A.M.M. Ali M. K. Harun Faculty of Applied Sciences, Universiti Teknologi MARA 40450 Shah Alam, Selangor D.E Malaysia M.Z.A. Yahya Faculty of Science & Defence Technology, Universiti Pertahanan Nasional Malaysia, Kemsg. Besi, 57000 Kuala Lumpur Malaysia Abstract The optical properties of polymers attract considerable attention because of their potential optoelectronic applications, such as in polymer-based light-emitting diodes, light electrochemical cells, and solar cells. To optimize the performance of optoelectronic and photonic devices, some polymers are modified through the introduction of specific end groups, copolymerization, grafting, crosslinking, blending, and hybridization with other inorganic polymers. All these techniques affect the optical properties of the polymer. This paper reviews the fundamental emission and optical properties, such as absorption, reflection, and polarization effect, of numerous polymer materials. These aspects are important to be considered in optoelectronic devices. Introduction Polymers are widely used in electrical and electronic applications. In early works, polymers have been used as insulators because of their high resistivity and dielectric properties. Polymer-based insulators are used in electrical equipment to separate electrical conductors without passing current through themselves. The insulator applications of polymers include printed circuit boards, wire encapsulants, corrosion protective electronic devices, and cable sheathing materials [1]. Polymers have several advantages, such as easy processing, low cost, flexibility, high strength, and good mechanical properties. In the microelectronic fabrication industry, polymers are used in the photolithography process.
    [Show full text]
  • Polymer Engineering for Drug/Gene Delivery: from Simple Towards Complex Architectures and Hybrid Materials
    Pure Appl. Chem. 2014; 86(11): 1621–1635 Conference paper Geta David, Gheorghe Fundueanu, Mariana Pinteala, Bogdan Minea, Andrei Dascalu and Bogdan C. Simionescu* Polymer engineering for drug/gene delivery: from simple towards complex architectures and hybrid materials Abstract: The paper summarizes the history of the drug/gene delivery domain, pointing on polymers as a solution to specific challenges, and outlines the current situation in the field – focusing on the newest strate- gies intended to improve systems effectiveness and responsiveness (design keys, preparative approaches). Some recent results of the authors are briefly presented. Keywords: controlled drug delivery systems; gene therapy; magnetic carriers; particulate polymer systems; POC-2014; stimuli-sensitive polymers. DOI 10.1515/pac-2014-0708 Introduction Significant human and financial resources have been always invested in medical research and development. Nowadays, the annual growth of sales for medical systems using biomaterials and the development of con- nected industries is, by far, one of the highest [1]. According to recent healthcare market research reports systems for drug delivery, diagnostics and regenerative medicine are among the global top ten medical device technologies. In this context, a major contribution to medical technologies comes from chemical engineering research, interfacing bioengineering and materials science. One main research direction is aimed at understanding how materials interact with the human body, i.e., twigging the factors affecting materials biocompatibil- ity and therapeutic efficiency, while another one is dealing with new biomaterials and devices to address unsolved medical problems. Specific requirements are to be met in the effort towards macromolecular materials with correct engi- neering, chemical and biological properties for the intended medical application.
    [Show full text]
  • College of Engineering MSE Materials Science and Engineering
    College of Engineering MSE Materials Science and Engineering MSE 101 MATERIALS ENGINEERING. (1) An introduction to the materials engineering profession. Professional growth, conduct, ethics and organizations. Introduction to the techniques of materials engineering. MSE 201 MATERIALS SCIENCE. (3) Microscopic and macroscopic structure as related to the properties of materials with engineering applications. Prereq or concur: MA 114 and freshman chemistry. MSE 202 MATERIALS SCIENCE LABORATORY. (1) To teach students the basic materials characterization laboratory techniques and demonstrate the difference in properties between different types of materials. Prereq: Concurrent enrollment in MSE 201. MSE 212 ELECTRONIC PROPERTIES OF MATERIALS. (3) Modern ideas on the engineering properties of solids, crystallographic properties; relationship of properties to structure and electronic properties of materials. Prereq: PHY 232 and 242, MA 214 concurrent. MSE 301 MATERIALS SCIENCE II. (3) Introduction to processing of ceramic, polymer and composite materials; relating the structure and bonding in these materials to their properties; considerations in choosing appropriate materials for engineering applications. Prereq: MSE 201, or consent of instructor. *MSE 351 MATERIALS THERMODYNAMICS. (3) Solution thermodynamics; partial molal quantities; ideal and non-ideal solutions; application of thermodynamics to phase equilibria; heterogeneous equilibria; free energy-composition relationships; temperature-pressure relationships. Prereq: MSE 201, MA 213 or concurrent. MSE 395 INDEPENDENT WORK IN MATERIALS ENGINEERING. (1-3) Research for undergraduate departmental students. May be repeated to a maximum of 12 credits. Prereq: Department major and approval of chairperson. MSE 401G METAL AND ALLOYS. (3) Crystal structures, phase diagrams, diffusion, nucleation and growth, deformation, recovery, recrystallization and grain growth are discussed to understand the structure-property relations in metals and alloys.
    [Show full text]
  • Fabrication and Characterization of Polycarbonate Microstructured Polymer Optical Fibers for High-Temperature-Resistant Fiber Bragg Grating Strain Sensors
    Fabrication and characterization of polycarbonate microstructured polymer optical fibers for high-temperature-resistant fiber Bragg grating strain sensors Andrea Fasano,1 Getinet Woyessa,2 Pavol Stajanca,3 Christos Markos,2,4 Alessio Stefani,2,5 Kristian Nielsen,2 Henrik K. Rasmussen,1 Katerina Krebber,3 and Ole Bang2,* 1 DTU Mekanik, Department of Mechanical Engineering, Technical University of Denmark, 2800 Kgs. Lyngby, Denmark 2 DTU Fotonik, Department of Photonics Engineering, Technical University of Denmark, 2800 Kgs. Lyngby, Denmark 3 Division 8.6 “Optical and Fibre Optic Methods“, BAM Federal Institute for Materials Research and Testing, 12205 Berlin, Germany 4 CREOL, The College of Optics & Photonics, University of Central Florida, 4000 Central Florida Blvd., Orlando, FL 32816, USA 5 Institute of Photonics and Optical Science (IPOS), School of Physics, The University of Sydney, NSW 2006, Australia *[email protected] Abstract: Here we present the fabrication of a solid-core microstructured polymer optical fiber (mPOF) made of polycarbonate (PC), and report the first experimental demonstration of a fiber Bragg grating (FBG) written in a PC optical fiber. The PC used in this work has a glass transition temperature of 145°C. We also characterize the mPOF optically and mechanically, and further test the sensitivity of the PC FBG to strain and temperature. We demonstrate that the PC FBG can bear temperatures as high as 125°C without malfunctioning. In contrast, polymethyl methacrylate-based FBG technology is generally limited to temperatures below 90°C. ©2016 Optical Society of America OCIS codes: (060.2370) Fiber optics sensors; (060.3735) Fiber Bragg gratings; (060.4005) Microstructured fibers; (060.2270) Fiber characterization; (160.5470) Polymers.
    [Show full text]
  • Polymer Engineering (9841) 1
    Polymer Engineering (9841) 1 9841:497 Honors Project (3 Credits) POLYMER ENGINEERING Prerequisites: Senior standing in the Honors Program and and full admission to an engineering major in the College of Engineering and (9841) Polymer Science. This is a design course in which the students will be actively involved in implementing design principles to synthesize new 9841:321 Polymer Fluid Mechanics (3 Credits) materials, to evaluate the performance of polymer materials, to design Prerequisite: 4600:310 or equivalent. Rheological properties and flow a processing scheme, or manufacture polymer products. The students characteristics of polymer fluid systems; non-Newtonian viscosity, will acquire skills in identification and ranking of factors, identification of viscoelasticity. materials systems, development of design of experiments, and evaluation 9841:324 Quantitative Polymer Analysis (3 Credits) of factors. The learning outcomes will be documented in detailed project Prerequisites: 3450:223, 3450:335, and full admission to an engineering reports. major in the College of Engineering and Polymer Science. This is an 9841:498 Research Problems in Polymer Engineering (1-9 Credits) undergraduate course on quantitative analysis problems in polymer Prerequisite: Permission of Department Chair. Faculty-supervised engineering. This course will allow the students to learn and use undergraduate research problems in polymer engineering culminating in necessary analytical methods in designing and optimizing processes a written report. in the field of the polymer. The solution to the linear and nonlinear 9841:499 Polymer Engineering Design Project (2 Credits) first and higher-order differential equations are provided by analytical Corequisite: 4600:400. Analysis and design of mechanical polymer methods. Students will be exposed to various concepts in linear algebra systems.
    [Show full text]