Machine Safety & Limit Switches

Farnell P 2855Date: 06-09-12 time:21:23

farnell.com element14.com 2855

Machine Safety & Limit Switches Page Page Grab Wire Switches ...... 2863 Non-Contact Switches...... 2858 Hinge and Lever Switches ...... 2857 Safety Relays...... 2863 Limit Switches ...... 2868 Solenoid Locking Switches ...... 2860 Machine Warning Devices ...... 2868 Tongue Operated Switches ...... 2855

Tongue Operated Switches Trojan 6 / GD2

Elf 3 - IP67 Standard footprint tongue actuated safety interlock with four sets of contacts, interchangeable Miniature tongue actuated safety interlock. Features two with a wide range of manufacturers’ products. sets of contacts, same size and footprint as original Elf, Stainless steel headed GD2 version for demand- stainless steel GD2 head option. ing applications. Switching rating 5A Ì 2NC or 1NC 1NO contacts Contacts 3PST-3NC + 1NO Ì Full IP 67 rating on all Elf 3 models Temperature Rating -25°C to 80°C Ì Ideal for small, light-weight guards Ì Swivel head allows eight possible actuator entry points H=95.6 W=52 D=32 Ì Actuator included Ì Contacts 3NC 1NO, offering more contacts than any other equivalent safety Ì Door catch may be added to hold larger guard doors interlock available shut Ì Same footprint as Trojan 5 Ì Self ejecting tamper resistant actuator, only operates when mounted on the guard H=75 W=25 D=29 Ì Actuator included with Trojan 6, ordered seperately for GD2 Automation Switching rating 6A Ì Door catch may be added to hold larger guard doors shut Contacts DPDT-NC or 1NC,1NO 248145 Temperature Rating -25°C to 80°C Price Each 248157 Mftrs List No Order Code 1+ 5+ 10+ Mftrs Price Each List No Order Code 1+ 5+ 10+ Standard Version 440K-T11171 400-7256 Switch + 90° Actuator GD2 Stainless Steel Head 440K-E33040 400-7384 440K-T11188 400-7270 Switch + Flat Actuator Actuator for GD2 327-6831 440K-E33080 400-7360 Flexible Actuator + GD2 Kit 327-6879 37 Trojan T15

Cadet 3 - IP67 Machine Safety & Limit Switches Standard footprint tongue actuated safety interlock, interchangeable with a wide range of man- Tongue actuated safety interlock on a standard DIN ufacturers’ products. 50047 footprint, interchangeable with a wide range of manufacturers’ products. Features three sets of con- Switching rating 5A Contacts DPDT-NC or 1NC 1NO tacts. Temperature Rating -25°C to 80°C Ì 2NC 1NO contacts Ì Full IP 67 rating on all Cadet 3 models Ì Stainless steel GD2 kit available H = 75W = 52D = 32 Ì Swivel head allows eight possible actuator entry Ì 2 sets of contacts - 2NC or 1NC 1NO Ì 30N actuator holding force preventing nui- points Ì Compact housing sance tripping on high vibration applications H=106 W=25 D=28 Ì 90 deg. Actuator included Ì Actuator included Ì Door catch may be added to hold larger guard doors shut 248140 Switching rating 5A Temperature Rating -25°C to 80°C Mftrs Price Each Contacts DPDT-NC + 1NO List No Order Code 1+ 5+ 10+ 248155 440K-T11303 400-7189 Mftrs Price Each 440K-T11305 400-7207 List No Order Code 1+ 5+ 10+ Switch + 90° Actuator 440K-C21061 400-7402 AZ 17 Compact - IP67 Ì Thermoplastic enclosure Ì High level of contact reliability with low Switch + Flat Actuator Ì Small body voltages and currents 440K-C21098 400-7426 Ì Multiple coding Ì Not sensitive to dirty conditions by virtue Flexible Actuator + GD2 Kit 327-6879 Ì Long life of patented roller system Ì Double insulated Ì 8 actuating planes Ì Pg cable gland Ì Cut clamp termination Ì Slot sealing plug included Standards IEC/EN 60947-5-7; EN 1088; BG-GS-ET-19 Contact rating 2304A / Vac Mechanical operations > 106 INTELLIGENT ONLINE BUYING Operating temperature -30°C to +80°C H = 85, W = Latching force 5N or 30N SYSTEM PROVIDING 30, D = 30mm Approvals BG and CCC. UL Recognised Complete cost control, reduced 241314 administration time, visibility of your Switch Latching Mftrs. Price spend, flexibility and personalised to Contacts - Description Force List No. Order Code 1+ your company’s needs. 2NC 5N AZ17-02ZK 189-0352● farnell.com/ibuy 2NC 30N AZ17-02ZRK 189-0353● 1NO / 1NC 5N AZ17-11ZK 189-0354● 1NO / 1NC 30N AZ17-11ZRK 189-0355● Actuator Keys Sliding Doors Standard AZ17/170-B1 189-0368● Vibration Damping Rubber MountingAZ17/170-B1-2245 RUBBER 189-0369● Hinged Guards (Front Mounting) Right Angle AZ17/170-B5 189-0370●

2855

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1 Farnell P 2856Date: 06-09-12 time:21:23

2856 farnell.com element14.com

Tongue Operated Switches - continued Safety Switch Separate Actuator SKC Series AZ 15/16 - IP67 Ì 1NC contact Ì 1.5A @ 240V ac switching capacity Ì Long life (AC-15) Ì Multiple coding Ì IP65 protection Ì IP67, Thermoplastic enclosure Ì Anti-tamper facility Ì Double insulated Ì GRP case Ì 3 M20 cable entries Ì 3 M16 x 1.5 cable entry Ì Large wiring compartment Ì BG and CSA Approved, UL Recognised Ì High level of contact reliability with low voltages and currents Body - H = 75, W = 52, D = 33mm Ì Not sensitive to dirty conditions by virtue of patented roller system The SKC safety position switch is an industry standard and can be used in virtually any ap- Ì Slotted holes for adjustment, circular holes for loca- plication. Thanks to design safety features conforming to VDE 0660 T200, IEC 60947-5-1 tion and the test regulations GS-ET 15, the SK is particularly suitable for personal protection ap- Ì Actuators available separately plications. Its versatility is enhanced by the variable actuator head and two actuator openings. With the two slots you can easily adjust the SK safety switch and lock it in position by means of the two holes accessible from the top or the two holes accessible from the Standards IEC/EN 60947-5-7; EN 1088; BG-GS-ET-19 front. The switch can be wired from three different sides. A transparent cover prevents for- Contact rating 2304A / Vac Conduit entry 3 X M20 eign particles from entering the contact space while connecting the power supply cable. Mechanical operations > 106 630891 Operating temperature -25°C to +80°C Price Each Approvals BG and CCC. UL Recognised Mftrs. List No. Order Code 1+ 5+ 10+ 50+ 241271 SKC-A1Z M 189-3163● Latching Price Each Force Contacts Mftrs. List No. Order Code 1+ Safety Guard Switch, Sub-Miniature AZ 15 Switch - H = 75, W = 40, D = 30mm 30N 1NO AZ15ZVRK-M20 189-0379● ’SKT’ 5N 1NO AZ15ZVRK-M20-2254 189-0380● Ì Short (83mm) body to DIN 50047 Ì Head rotates, without undoing screws, to allow one of 8 vertical or hori- Automation AZ 16 Switch - H = 90, W = 40, D = 30mm zontal actuator approach directions to be selected (locked in place 30N 1NO / 1NC AZ16ZVRK-M20 189-0381● when switch is mounted) 5N 1NO / 1NC AZ16ZVRK-M20-2254 189-0382● Ì Triple coded Stainless Steel Actuator 30N 2NC AZ16-02ZVRK-M20 189-0383● Ì Slow make/break or Snap-action contacts 5N 2NC AZ16-02ZVRK-M20-2254 189-0385● Ì Positive drive forced disconnect on all NC contacts 30N 3NC AZ16-03ZVRK-M20 189-0386● Ì Hinged snap-shut lid seals to IP65 Body H = 83 (excluding head), W = 30, D = 30 5N 3NC AZ16-03ZVRK-M20-2254 189-0387● Fixing centres = 22mm 30N 1NO / 2NC AZ16-12ZVRK-M20 189-0388● Housing Thermoplastic (UL94-VO) Max inrush current IEC 947-5-1, AC 15, DC 13 5N 1NO / 2NC AZ16-12ZVRK-M20-2254 189-0389● Cable entry PG9 Max voltage 250Vac AZ 16 Switch complete with Actuator and Individual Coding - H = 90, W = 40, D = 30mm Operating temp -30°C to +80°C Thermal current Ith 10AA Mechanical life 1 x 10 6 switch operations Approvals UL Recognised, CSA and BG 20N 1NO / 2NC AZ16-12ZI-B1-M20 189-0390● 37 231206 Actuators Price Each ● Straight Rigid AZ15/16-B1 189-0391 Mftrs. List No. Order Code 1+ 5+ 10+ 50+ Machine Safety & Limit Switches Magnetic Latch Straight Rigid AZ15/16-B1-1747 MAGNET LATCH 189-0392● 1nc 1no slow make/break 601-6419-059 320-5514 Ball Latch Straight Rigid AZ15/16-B1-2053 BALL LATCH 189-0393● 2nc slow make/break 601-6469-066 320-5538 Angled, Flexible Adjustable AZ15/16-B2 189-0394● Accessories Magnetic Latch, Flexible Angled AZ15/16-B2-1747 MAGNET LATCH 189-0395● KEY,UNIVERSAL 391.1452.058 331-661 Angled, Flexible Adjustable AZ15/16-B3 189-0397● Magnetic Latch, Flexible Angled AZ15/16-B3-1747 MAGNET LATCH 189-0398● Angled, Flexible Adjustable AZ15/16-B6 189-0399● Interlocking safety switches SK Type Safety Switch Separate Actuator Ì Actuator operated safety switch SKI Series Ì Separate actuator Ì Reversible head allows for 8 actuator approaches Ì Integrated eject function Ì Hinged snap-shut lid seals to IP65 Ì 1NO + 1NC contacts (Overlapping) Ì 3A @ 240V ac switching capacity (AC-15) Ì IP65 protection Ì GRP case Ì 1 M20 x 1.5 cable entry Body H = 90, W = 52, D = 33mm Ì BG Approved 624363 Contact Reference Price Each Body - H = 100, W = 31, D = 30.5mm Type Type Mftrs. List No. Order Code 1+ 5+ 10+ 25+ The SKI is the slimline version of a safety switch with separate actuator. It is based on the 1 NC + 1 NO SK-U1Z M 601.6119.016 331-235 BERNSTEIN I88 family. Its dimensions, not including the actuating head, correspond to EN 2 NC + 1 NO SK-UV15Z M 601.6169.026 331-284 50047. The actuating head is rotary mounted and has two actuator openings. The SKI safety switch is designed for installation on section structures and in applications with Accessories confined installation conditions. It offers a large connection space for the wiring. Metal Actoator 391.1451.914 331-648 630890 Adjustable Actuator 391.1452.058 331-661 Price Each Mftrs. List No. Order Code 1+ 5+ 10+ 50+ SKI-UV15Z M3 189-3162●

IMPROVED BACK ORDER DELIVERY

Receive email updates with the exact status, due date and despatch information of all your back order items farnell.com The first online technical portal for design engineers Log on, research, refine and design

2856

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1 Farnell P 2857Date: 06-09-12 time:21:23

farnell.com element14.com 2857

Heavy Duty Key Operated Switch Hinged Guard Switch TV10S Series Ì Metal bodied, available with/without locking of operating Ì Metal enclosure key Ì Tamper resistant Ì Can only be operated with the specifically designed ac- Ì Positive-break NC contacts tuator order separately Ì Meets IP67 washdown and immersion requirements Ì 3 positive opening contacts as standard Ì Good resistant to oil and petroleum Ì Positive opening Ì Actuator heads can be repositioned by 4 x 90° Ì Conforms to EN1088, EN60204 Ì Actuator shaft can be turned 360° H=40 W=113.5 D=44 Ì 1 Cable entry M20 x 1.5 Contact rating for 1 million ops 24Vac/6A, 110Vac/3A, 230Vac/2A - 24Vdc/0.5V Ì BG Approved, UL Recognised Operating temperature -25°C to +70°C Body - H = 107, W = 40.5, D = 38mm Min. operating force for 15N (EN60947-5-1) cable entry M20 x 1.5 The TV335 Series is designed for use with hinged movable machine guards which may be Degree of protection IP67 closed for operator safety. Their tamper-resistant design and positive-opening NC contacts 210292 provide a significantly higher level of safety than conventional, spring-driven limit switches Mftrs. Price Each often used to monitor hinged-guard position. Their IP67 rating make them ideal for inter- Contacts List No. Order Code 1+ 5+ 10+ locking safety guards in hostile environments. 3PST-2NO / 1NC XCS-A502 322-7613 The TVS335 is a single-piece, electromechanical safety interlock switch which is designed 3PST-2NC / 1NO XCS-A702 322-7625 to mount to a hinged machine guard. After opening the guard only 3°, the unit’s positive- break, normally-closed contacts are forced to open by a direct (non-resilient) actuating Type Actuators mechanism. These positivebreak contacts ensure circuit interruption (and machine stop- Straight XCS-Z01 322-7650 page). Flexible XCS-Z03 322-7662 630589 Switching Mftrs. Price Each Monitor and Interface modules Contacts Voltage List No. Order Code 1+ 1NO / 1NC 4A @ 230Vac / 24V dc TV10S335-11Z-M20 189-0458● PSR-SCP and PSR-SPP Series 2NC 4A @ 230Vac / 24V dc TV10S335-02Z-M20 189-0459● Ì Two-channel speed and downtime monitor Ì Start button monitoring or automatic start for

Hinged Guard Switch Automation SIL 3 in accordance with IEC 61508 TVS 400 Series Ì Pluggable spring-cage connection terminal Ì Thermoplastic enclosure blocks Ì Double-insulated Ì Interface module for the connection of sev- Ì Good resistance to oil and petroleum spirit eral safety sensors or switches with NC/NO Ì Simple fitting, especially on 40 mm profiles contacts to the safety relay PSR-SDC4, with Ì Universal fitting on guards hinged on left or right-hand side screw connection Ì Fixing holes for M6 countersunk screws to DIN 965 Ì Certifications: CUL, GOST, TUEV-RH and UL Ì 2 Cable entries M20 x 1.5 Body - H = 92 Ì BG Approved, UL Recognised Speed monitor Interface module Ì Standards/regulations: EN 60664/VDE 0110 W = 111.5, D = 36mm Input voltage 24 VDC Degree of protection IP20 630601 Input current 100 mA Contact Configuration 4NO, Speed monitor Switching Mftrs. Price Each Response time 15 ms 1NO / 1NC, Interface module Contacts Voltage List No. Order Code 1+ 37 Operating temperature-20°C to +55°C Status display (Inter- Green LED face module) 1NO / 2NC 2A @ 230Vac / 1A @ 24Vdc TVS 400-12/B-M20 189-0460●

Accessories Machine Safety & Limit Switches Dimensons in mm Mftrs Order HWD List No. Code Additional Hinge Z 400 189-0461● 112 45 114.5 PSR-SPP- 24DC/RSM4/4X1 206-4589 99 45 114.5 PSR-SCP- 24DC/RSM4/4X1 206-4590 99 22.5 106 PSR-SCP- 24DC/SIM4 206-4599 TV.S 400, Hinged Safety Switch - IP67 117 22.5 106 PSR-SPP- 24DC/SIM4 206-4600 Ì Thermoplastic enclosure 644244 Ì Simple mounting, especially on 40 mm profiles Mftrs. Price Each Ì Good resistance to oil and petroleum spirit List No. Order Code 1+ 2+ 5+ Ì 2 cable entries Ì For doors hinged on left or right-hand side Speed monitor Standards IEC/EN 60947-5-1; EN 1088; BG- PSR-SPP- 24DC/RSM4/4X1 206-4589● GS-ET-15 PSR-SCP- 24DC/RSM4/4X1 206-4590● Contact rating 2302.5A / Vac Mechanical operations > 106 Interface module H = 92, W = 71, D = 36, Operating temperature -25°C to +65°C ● PSR-SCP- 24DC/SIM4 206-4599 Centres = 62mm PSR-SPP- 24DC/SIM4 206-4600● 241619 Price Each Hinge & Lever Switches Mftrs. List No. Order Code 1+ 5+ 10+ 25+ Switch ‘Rotocam’ - Hinge Actuation 3PST-1NO / 2NC TVS 400-12B-M20 418-6485 Ì Designed for interlocking hinged guard Accessory doors and access flaps Additional Hinge Z 400. 418-6497 Ì Housed in a heavy duty diecast alloy case Ì Positive operation isolates power with in 3° of door movement Ì Stainless steel operating shaft can be used as hinge point Hinged Guard Switch Ì Supplied with anti-tamper lid screws TVS 410 Series Ì Door catch may be added to hold vibrating or larger guard doors Ì Metal enclosure shut Ì Good resistance to oil and petroleum spirit Ì Sealed to IP66 Ì For Left or Right hinged doors H=102.5, W=65, Ì Conforms to EN1088, EN60947-5-1, BG, CSA, SA, SVVA D=39, Ì Simple mounting Shaft length=31, dia=16 outer, 9.5 inner Ì Adjustable switching angle Ì 230V ac @ 4A (AC-15), 24V dc @ 1A (DC-13) switching Contacts 2 pair N/C (safety) Contact rating 1A @ 500V ac, 2A @ 250V ac capacity 1 pair N/O (auxilary)DPDT-NC 5A @ 100V ac max Body - H = 92, Ì BG Approved, UL Recognised Conduit entry1 x M201M20 Operating temperture-25°C to +80°C W = 111.5, D = 36mm 210178 630602 Entry Size Price Each Connection Mftrs. Price Each Switch Mftrs. List No. Order Code 1+ 10+ 25+ 50+ Type Contacts List No. Order Code 1+ M20 440H-R03074 773-669 Screw 2NC / 2NO TVS 410SK-11/11U 189-0462● Connector - M12 Bottom 2NC / 2NO TVS 410ST1-11/11U 189-0464● Connector - M12 Top 2NC / 2NO TVS 410ST2-11/11U 189-0465● Accessories Additional Hinge Z410 189-0466●

2857

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1 Farnell P 2858Date: 06-09-12 time:21:24

2858 farnell.com element14.com

Hinge & Lever Switches - continued Non-Contact Switches AZ335 Actuators ‘Ferrogard 1 and 2’ - Magnetically Actuated Straight Ì Magnetically actuated safety switch Ì Housed in glass-reinforced polycarbonate case and sealed to IP67 Ì The axis of the hinge should be 52.7 Ì Ideal for environments where contamination could be a mm above the top edge of the safety problem switch and in the same plane Ì Anti-tamper fixing screws and security key supplied Ì On hinged guards, minimum actuating Ì Door catch may be added to hold vibrating or larger doors radius of 700mm at 90° to the plane of shut the actuator is needed Ì Approved to BS5304 Ì Minimum actuating radius of 900mm on Switch: H = 76 (excl. gland), W = 30, D = 17 (overall) hinged guards in line with the plane of Actuator: H = 76, W = 30, D = 17 (overall) the actuator. Mounting slots: M4 clear Ì Max. 200 Ncm tightening torque for Contact rating 2A @ 250V ac (not for use in dc circuits) mounting the actuator SPST-NO Power rating 100VA @ 50V, 500VA @250V ac100VA@50V, 630195 500VA@250V Auxilary contact rating (1 N/C) (for 175-311) 0.5A @ 300Vdc/250V ac Mftrs. Price Each Auxilary power rating 15VA/10W Actuator Style List No. Order Code 1+ 210161 Without Rubber Mount- AZ335/355-B1 Price Each ing 189-0377● Mftrs. List No. Order Code 1+ 10+ 25+ 50+ With Rubber Mounting AZ335/355-B1-2245 189-0378● Without auxiliary contacts 440N-G02001 175-310 With auxiliary contacts 440N-G02002 175-311 Safety hinge Switch SHS3 Series ‘Ferrogard GD2’ - Magnetically Actuated Ì For hinged guards with a rotation angle between Stainless Steel - IP68 0° and 270°

Automation Ì Switching point selectable within range of 270° Ì Stainless Steel housing BS3146 ANC48 Ì Simple re-adjustment with integrated system Ì Sealed to IP68 - Can be pressure hosed. Ì 2 Forced disconnect safety contacts (Ideal where hygiene is paramount) Ì Integrated cable connection Ì Can be used up to +125°C Ì Axial direction of connection Ì Supplied with 3mtr. cable (pre-wired) Ì Suitable for use in systems in control category 4 to EN 954-1 Ì Available in three contact configurations Ì Protection IP67 Ì Conforms to BS EN 1088 6.3.5 Ì Elongated mounting holes Ì Stainless steel hinge and high-quality plastic switch housing Contact rating: 2A@250Vac, 1A@24Vdc Body - H = 137 (O/A), Hinge = 63, Operating life: 1 x 1000000 W = 82, D = 19.5mm Operating temperture -25°C to +125°C The SHS series and a solution that makes it unnecessary to replace the safety hinge switch 37 when equipment such as safety gates are damaged as the result of mechanical stress, Switch: H=78.5, W=33.5, D=16 such as after being bumped by a fork-lift truck for instance. Even after the switching point Actuator: H=78.5, W=33.5, D=16 has been set, if need be, the user can correct the hinge setting with the aid of the integrat- Machine Safety & Limit Switches ed fine adjustment system. The SHS3 hinge switch is reusable even when the Mounting slots: M4 clear entire system needs to be converted: With the aid of a change kit, the user can redefine the 210278 switching point without loosing the high protection rating of IP67. The SHS3 has a swivel Mftrs. Price Each range from 0° to 270°. The switching point is also freely selectable within this range. The List No. Order Code 1+ + + + SHS3 hinge switch has virtually no limits in terms of its installation flexibility. Not only does 440N-G02112. 305-5243 the SHS3 enable front and interior installation, right-hinged or left-hinged mounting or freely 440N-G02117 305-5279 selectable direction of electric connection, but thanks to the switching point which can be set in an angle range of 270°, this hinge switch can also be installed in places that were 440N-G02123 305-5292 previously not possible. 630846 ‘Ferrogard 4’ - Magnetically Actuated Axial Cable Price Each Fitting Mftrs. List No. Order Code 1+ 5+ 10+ 50+ Right Side SHS3-U15Z-KA 5 R 189-3158● Ì Magnetically activated safety switch Ì Housed in ABS case and sealed to IP65 Left Side SHS3-U15Z-KA 5 L 189-3159● Ì PCB switch assembly is encapsulated in the lid Accessories Ì Anti-tamper fixing screws and security key supplied Empty Hinge SHS3 EMPTY HINGE 189-3160● Ì Approved to BS5304 Change Kit SHS3 CHANGE KIT 189-3161● Switch H=65.0, W=50.0, D=35.0 Actuator H=76.0, W=30.0, D=17.0 Contacts SPST-1NO / 1NC Hinged Safety Switch - SHS Contact rating 2A @ 250V ac (not for use in dc circuits) Power rating 100VA@50V, 500VA@250VAC15, DC13 Ì Safety guard hinge switch Auxiliary contact rating 0.5A @ 300V dc/250V Ì Safety function disguised within hinge Operating temperture -10°C to +65°C Ì Resistant to manipulation 210162 Ì Safety contact ON point can be set Price Each Ì 1 NC positive drive forced disconnect safety contact Mftrs. List No. Order Code 1+ 10+ 25+ 50+ Ì 1 pair of hinges offer mechanical redundancy to Cat 4 safety 002008 179-962 systems H = 80, W = Ì Concealed M12 connector exit point 7, D = 19mm ‘Ferrogard 6 and 9’ - Magnetically Actuated 624371 Connector Price Each Ì Magnetically activated safety switch Ì Switch can be activated from the front or side eliminating the need Mounting Type Mftrs. List No. Order Code 1+ 5+ 10+ 25+ for a mounting bracket Rear 6019261016 399-9476 Ì Anti-tamper fixing screws and security key supplied Axial 6019261009 399-9488 Ì Sealed to IP67 Ì Approved to BS5304 Ì Door catch may be added to hold vibrating or larger guard doors FREE GLOBAL LEGISLATION SUPPORT shut RoHS, REACH, WEEE, ErP, Batteries Switch: H=82 (exc. gland) W=18, D=16mm Directive - latest updates, free white Actuator: H=82, W=18, D=18mm Mounting Slots: M4 clear Contacts SPST-NO without presence of magnet Sensing distance Make 10mmmm papers and live online Q&A at Contact rating a.c type 2A (including inrush), 250V ac rms Break20mmmm element14.com/legislation d.c type 1A, 24Vdc Test 210163 Price Each Standard Connection Mftrs. List No. Order Code 1+ 10+ 25+ 50+ Switch & Actuator AC 440N-G02023 176-358 Switch & Actuator DC 440N-G02044 594-180

2858

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1 Farnell P 2859Date: 06-09-12 time:21:24

farnell.com element14.com 2859

Sipha BNS 250 - Magnetically Actuated - IP67 Magnetically Coded Switch / Actuator Ì Coded sensor - highly resistant to defeat Ì Safety and auxiliary outputs Ì Reset and contactor monitoring Ì Fully sealed sensors IP67 H = 25, Complete unit = W = 33, Ì Full self monitoring switch + actuator Ì Conforms to EN 1088, EN 60204-1, 60947-5-3, EN D = 13 954-1 CATEGORY 3, VDE 0660 PART 209 Ì Thermoplastic enclosure Ì Insensitive to transverse misalignment Ì With coding Ì Concealed mounting possible Ì 1N/O, 1NC Contacts Ì Insensitive to soiling Power supply Ì Long life, no mechanical wear Ì Cable length 1m (Control unit 1) 24V ac/dc (,2VA) Ì Sealed to IP 67 (Control unit 2) 24Vac/dc 110/230Vac selectable (4VA) Standards EN 954-1; BG-GS-ET-14; EN 1088 ( In combination with AES safety relays) Safety inputs 1N/O+1N/C Contact rating 24Vdc @ 10mA Max input resistance Red/blue - 200Ω, green/yellow - 150Ω Sensing Distance Make = 4mm, Break = 14mm Operating temperature -25°C to +70°C Max. safety switching distance Sensor S11 - make 5mm, break 11mm For Suitable Safety Relays please see 189-0338 or 189-0337 (typical) Sensor S22 - make 9mm, break 12mm 241385 Min. approach speed Typical 10 to 17 mm/s Price Each Safety relay output Description Mftrs. List No. Order Code 1+ (Control unit 1) 1N/O TUV approved ● (Control unit 2) 2N/O TUV approved Switch BNS250-11ZG-3M 189-0424 Actuator - Coded BPS250 189-0425● Max switched ac current/voltage 4A/250V ac/1000VA at COSØ = 1 Shim Plate SPACER BNS 250 189-0427● Max switched dc current/voltage 2A/30 V dc/ac Min switched current/voltage 10mA/10V ac/dc Max output fuse 5A quick acting ac, 3A quick acting on dc Coded Magnetic Switch Auxiliary output BNS260 Series (Control unit 1) 1N/C Phot MOS, (not for safety use), on resistance typically 36Ω Ì Thermoplastic enclosure, sealed for sub- (Control unit 2) 1N/C (not for safety use) mersibility Ì Tamper-resistant cannot be bypassed with Automation Max. aux. switched current/voltage (Control unit 1) 10mA/230Vac, 100mA/24Vdc simple magnets (Control unit 2) 2A/230Vac, 2A/24Vdc Ì Shock and vibration tolerant to withstand mechanical abuse Ì Rugged, corrosion-resistant housing tolerates most industrial Aux. contacts (S22 only) IN/C (not for safety use) environments Indication LED 1 Green = Output closed Body - H = 36, W = 26, Ì No mechanical wear - Long-life D = 13mm LED 2 Red = Power on Ì LED switching condition indicator Max. drop-out time 25ms Ì Insensitive to transverse misalignment Impulse withstand voltage 2500V Ì Terminated by M8 x 1, 6-pole connector Operating temperature -10°C to +55 °C Ì BG Approval, UL Recognised The Series BNS260 coded-magnet sensors are designed for use as a safety interlock 210318 switch on movable machine guards/articulating robot arms. Each sensor set consists of a 37 Mftrs. Price Each multiple reed switch unit and a coded-magnet actuator. The reed switches, wired in series, Description List No. Order Code 1+ 5+ 10+ will only close in the presence of their matched magnetic field array. Both switch and mag-

Control unit 1 440N-S32013 327-6909 net assemblies are sealed to IP67 (submersible) standards. Their tamper-resistant design Machine Safety & Limit Switches Control unit 2 440N-S32021 327-6910 prevents bypassing with a simple magnet or improperly coded magnetic field. In addition. sensor S11 440N-S32014 327-6983 The reed switch assembly is typically mounted to a stationary portion of a guard structure, with the coded-magnet assembly mounted to the movable element of the machine guard. sensor S22 440N-S32023 327-6995 When the guard is closed, and the matched magnetic field aligns with the reed switch unit, -10°C55°C the switches will close. When the guard is open, or the required magnetic-field array is not -10°C55°C properly aligned with the reed switch assembly, the sensor output will remain OFF. 630522 Activation Switching Mftrs. Price Each Coded Magnetic Switch Direction Contacts Voltage List No. Order Code 1+ BNS16 Series Left Hand Side 2NO / 1NC 10mA @ 24V dc BNS260-02/01ZG-ST-L 189-0428● Ì Thermoplastic enclosure, sealed for sub- Right Hand Side 2NO / 1NC 10mA @ 24V dc BNS260-02/01ZG-ST-R 189-0429● mersibility Left Hand Side 1NO / 1NC 10mA @ 24V dc BNS260-11/01ZG-ST-L 189-0430● Ì Wiring compartment with 3 cable entries Right Hand Side 1NO / 1NC 10mA @ 24V dc BNS260-11/01ZG-ST-R 189-0431● (M20 x 1.5) Ì Tamper-resistant cannot be bypassed with simple magnets Accessories Ì Satisfies EN954 Category 4 when used with appropriate Series Coded Magnetic Actuator BPS260-1 189-0432● AES safety controller Coded Magnetic Actuator - 90° BPS260-2 189-0433● Ì Shock and vibration tolerant designed to withstand mechanical 2m Connector - M8 6-pole A-K6P-M8-R-G-2M-GY-1 189-0434● abuse 5m Connector - M8 6-pole A-K6P-M8-R-G-5M-GY-1 189-0435● Ì Rugged, corrosion-resistant housing tolerates most industrial Body - H = 90, W = 52, environments D = 32mm Ì No mechanical wear - Long-life Coded Magnetic Door Switch Ì BG Approval, UL Recognised BNS-B20 Series The Series BNS16 coded-magnet sensors are designed for use as a safety interlock on Ì Thermoplastic enclosure movable machine guards. Each sensor set consists of a multiple reed switch unit and a Ì Non-contact safety switch coded-magnet actuator. The sensor outputs will only change state in the presence of their Ì Does not protrude into the door opening matched magnetic field array. Both switch and magnet assembly are sealed to IP67 (sub- Ì Substitutes door-handle and safety switch, no further door mersible) standards. The unit features small mounting footprint dimensions providing an fittings required attractive alternative in applications characterized by alignment problems and/or harsh en- Ì Modern and symmetric design vironments. 630506 Ì Tamper-proof because of integral coded safety sensor Ì Ergonomic operation Activation Switching Mftrs. Price Each Ì Suitable for hinged and sliding guards Direction Contacts Voltage List No. Order Code 1+ Body - H = 140, W = 119.5, D = 43.3mm Ì No protruding actuator Front 1NO / 2NC 400mA @ 100V ac/dc BNS16-12ZD 189-0419● Ì Simple mounting with 4 Screws Right 1NO / 2NC 400mA @ 100V ac/dc BNS16-12ZR 189-0420● Ì BG Approved, Ì Connector M12 x 1, 8-pole UL Recognised Back 1NO / 2NC 400mA @ 100V ac/dc BNS16-12ZU 189-0421● Top 1NO / 2NC 400mA @ 100V ac/dc BNS16-12ZV 189-0422● The BNS-B20 Series is designed for use as a combination door handle and safety interlock switch for use on light to medium weight hinged and sliding machine guards. Each unit Accessories consists of a door handle assembly equipped with two multiple reed switch arrays and Coded Magnetic Actuator BPS16 189-0423● coded magnet actuators. In addition, the unit features two latching magnets that attract pole pieces in the sensor unit providing a holding force of approximately 100 Newtons. The reed switches will only close in the presence of their matched magnetic field array, thus enabling machine operation. Both switch and magnet assemblies are sealed to IP67 (submersible) standards. Their tamper-resistant design prevents bypassing with simple magnets. The unit also features an LED display of switch status and an M12 x 1 quick-connect connector for ease of wiring and installation. The unit consists of two components, the door handle unit and the sensor unit. The sensor

2859

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1 Farnell P 2860Date: 06-09-12 time:21:24

2860 farnell.com element14.com

Non-Contact Switches - continued reed switch array (satisfying EN954, Category 1 without use of an ancillary safety relay module). Both switch and magnet assemblies are sealed to IP67 (submersible) standards. Coded Magnetic Door Switch - continued Their tamper-resistant design prevents bypassing with a simple magnet or improperly coded magnetic field. The BNS module features an integral LED display of switch status and a BNS-B20 Series - continued 1-meter long prewired pigtail. In addition, the BNS300 features an integral monitoring and control circuit which detects unit is typically mounted to the stationary portion of the guard structure, with the coded- faults in the reed switch array (satisfying EN954, Category 1 without use of an ancillary magnet/handle assembly mounted to the movable element of the machine guard. When the safety relay module). guard is closed, the matched magnetic fields align with the reed switch arrays, closing the 630550 switches and enabling machine operation. When the guard is open, or the magnetic fields Switching Mftrs. Price Each are not properly aligned with their reed switch arrays, the sensor output will remain OFF. Discription Contacts Voltage List No. Order Code 1+ 630580 LED and Monitoring 1NC 30mA @ 24V dc BNS300-01ZG - 2.0M 189-0436● Switching Mftrs. Price Each LED 1NO / 1NC 10mA @ 24V dc BNS303-11ZG-2M 189-0439● Discription Contacts Voltage List No. Order Code 1+ LED 1NO / 2NC 10mA @ 24V dc BNS303-12ZG-2M 189-0441● Left Hand Door 1NO / 2NC 10mA @ 24V dc BNS-B20-12ZG-ST-L 189-0455● Accessories Right Hand Door 1NO / 2NC 10mA @ 24V dc BNS-B20-12ZG-ST-R 189-0456● Actuator - Standard BPS300 189-0437● Accessories Actuator - Food Processing Industry BPS303 189-0442● Actuator BNS-B20-B01 189-0457● Coded Magnetic Safety Switch Coded Magnetic Switch Preventa XCSDM BNS 33 Series Ì Actuation face to face, side to side and face to side GRP Body - H = 25, Ì Compact version - 2 contacts W = 88, D = 13mm Ì Standard version - 3 contacts Ì Coded reed technology - Switch cannot be defeated Stainless Steel - H = 27, W = 88, D = 14.5mm by 1 magnet Ì Compact size Ì Satisfy EN954, Category 1, 3, or 4 when used Ì Certified safety solution when used with PREVENTA Ì Thermoplastic enclosure, sealed for with appropriate Series AES safety controllers. XPSDM safety relays submersibility Ì Rugged, corrosion-resistant housing tolerates Compact - H = 51, Standard - H = 88, Ì Tolerant of up to 6mm misalignment Ì Tamper-resistant cannot be by- most industrial environments W = 7, d = 16mm W = 13, D = Ì Integrated 2m cable passed with simple magnets Ì No mechanical wear - Long-life 25mm

Automation Ì Supply voltage 24V ac/dc Ì Shock and vibration tolerant to Ì Insensitive to transverse misalignment Ì IP67 Protection withstand mechanical abuse Ì BG Approved, UL Recognised 624379 The BNS33 Series coded-magnet sensors are designed for use as a safety interlock switch Mftrs. Price Each on movable machine guards/articulating robot arms. Each sensor set consists of a multiple Contacts List No. Order Code 1+ 5+ 10+ reed switch unit and a coded-magnet actuator. The reed switches, wired in series, will only close in the presence of their matched magnetic field array. Both switch and magnet as- Compact Range semblies are sealed to IP67 (submersible) standards (IP69K for BNS33S). Their tamper re- DPST-1NO / 1NC XCSDMC5902 427-6050 sistant design prevents bypassing with a simple magnet or improperly coded magnetic DPDT-NC XCSDMC7902 427-6073 field. In addition, the BNS module features an optional built-in LED display of switch status, Standard Range and a 1-meter long prewired pigtail to assure sealing integrity. The reed switch assembly is typically mounted to a stationary portion of a guard structure, 3PST-2NO / 1NC 427-6097 427-6097 37 with the coded-magnet assembly mounted to the movable element of the machine guard. 3PST-2NC / 1NO 427-6115 427-6115 When the guard is closed, and the matched magnetic field aligns with the reed switch unit, the switches will close.When the guard is open, or the required magnetic-field array is not Magnetic Safety Switch - MRK properly aligned with the reed switch assembly, the sensor output will remain OFF. Machine Safety & Limit Switches 630556 Ì One or two safety contact plus auxiliary Description Switching Mftrs. Price Each Ì IP67 sealed housing Termination Contacts Voltage List No. Order Code 1+ Ì 3m lead or plug-in options Ì 18mm operating range GRP Case (IP67) Ì Ideally suited for use in wash-down areas 2m Cable 1NO / 1NC 250mA @ 100V ac/dc BNS33-11Z-2M 189-0444● Voltage max 100 Vdc M8x1 Connector 1NO / 1NC 250mA @ 100V ac/dc BNS33-11Z-ST 189-0446● Current max 1 N/O = 1A, 2N/O = 0.1A With LED Status Indicator Operating temperature -10°C to 55°C ● H =20.5, W = 84, D=20.5 2m Cable 1NO / 2NC 250mA @ 100V ac/dc BNS33-12ZG-2M 189-0449 249551 3m Cable 1NO / 1NC 250mA @ 100V ac/dc BNS33-11ZG-3M 189-0445● Mftrs. Price Each With Individual Contact Outlet Contacts List No. Order Code 1+ 5+ 10+ 25+ 3m Cable 2NC 250mA @ 100V ac/dc BNS33-02Z-2187-3M 189-0443● Switch, 3m Cable With LED Status Indicator and Individual Contact Outlet SPDT-1NC / 1NO MRK-11 399-9634 ● 2m Cable 1NO / 2NC 250mA @ 100V ac/dc BNS33-12Z-2187-2M 189-0447 3PST-1NC / 2NO MRK-12 399-9646 3m Cable 1NO / 2NC 250mA @ 100V ac/dc BNS33-12ZG-2187-2M 189-0448● Switch, Plug Connection Stainless Steel Case (IP69K) 3PST-1NC / 2NO 399-9660 399-9660 1m Cable 1NO / 2NC 250mA @ 100V ac/dc BNS33S-12Z 189-0453● Accessories Solenoid Locking Switches Actuator - GRP Case BPS33 189-0450● Actuator - Stainless Steel Case BPS33S 189-0454● ‘Spartan’ - Safety Interlock Switch Shim Plate / Spacer BN31/33 189-0452● Ì Compact tongue operated safety interlock switch with guard locking Cylindrical Coded Magnetic Switch Ì Locks guard shut until machine is safe BNS300/303 Series Ì Lid mounted status indication Ì High locking force:≤1200N Ì 2 N/C + 1 N/O contacts Ì Rotating head: 4 possible key entry slots

BNS300 Body - L = 78, BPS303 Body - L = 44, H=120, W=58, D=35 Dia. = M30 x 1.5 Dia. = M30 x 1.5 Safety contacts 2 N/C Auxiliary contacts 1 N/O Ì Thermoplastic enclosure, sealed for submersibility Conduit entry M20 Ì Tamper-resistant cannot be bypassed with simple magnets Operating temperature -20°C to +60°C Ì Shock and vibration tolerant to withstand mechanical abuse Meets standard EN1088, EN60947-5-1, EN292, EN60204-1 Ì Rugged, corrosion-resistant housing tolerates most industrial environments 210202 Ì No mechanical wear - Long-life Price Each Ì Integral LED switching condition indicator Voltage Mftrs. List No. Order Code 1+ 5+ 10+ 25+ Ì Insensitive to transverse misalignment 24V ac/dc 440G-S36001 599-700 Ì Terminated by 1m pigtail lead 110V ac 440G-S36003 599-712 Ì BG Approval, UL Recognised The Series BNS300 and BNS303 coded-magnet sensors are designed for use as a safety interlock switch on movable machine guards/articulating robot arms. Each sensor set consists of a multiple reed switch unit and a coded-magnet actuator. The reed switches, wired in series, will only close in the presence of their matched magnetic field array. In addition, the Series features an integral monitoring and control circuit which detects faults in the

2860

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1 Farnell P 2861Date: 06-09-12 time:21:24

farnell.com element14.com 2861

Tongue Operated Safety Interlock Switch Operating Mftrs. Price Each Power to Release - TLS1-GD2 Contacts Voltage Connec- List No. Order Code 1+ tions Ì Locks guard shut until machine is safe Accessories Ì High locking force of 2000N Actuator Key Straight - Rigid AZ17/170-B1 189-0368● Ì Stainless-steel actuator guide aids alignment and im- Actuator Key Damps Vibration AZ17/170-B1-2245 RUBBER 189-0369● proves mechanical life Actuator Key Angled - Rigid AZ17/170-B5 189-0370● Ì Five contacts for door position and lock monitoring Actuator Key Flexible Angle AZM170-B6 189-0371● Ì Rotatable head with 4 possible key entry points ● Ì Conforms to EN 1088 and EN 60947-5-1 Triangular Maintenance Key AZM M5 KEY 189-0406 Ì Actuator available separately 624372 AZM161 Safety Interlock Switch Voltage Price Each Solenoid-Latching Power to Release Mftrs. List No. Order Code 1+ 5+ 10+ Ì Solenoid-locking design 110V ac 440G-T27124 327-6806 Ì Highly tamper-resistant, reducing the 230V ac 440G-T27123 327-6818 liability exposure Ì Positive-break NC contacts Actuators Ì Conditional safe outputs Fully Flexible 440G-A27143 327-6831 Ì Meets IP67 environmental requirements Ì High-strength, stainless-steel actuator key Body - H = 90, W = 130, Heavy Duty Tongue Operated Safety Interlock Switch D = 30mm Ì Rugged, corrosion-resistant housing Ì Large wiring compartment Atlas 5 - Standard Ì Four optional key entry locations for installation flexibility Ì Locks guard shut until machine is safe Ì Independent actuator key position and locking pin position monitoring contacts Ì High locking force up to 5500N Ì Manual release Ì Heavy-duty die-cast alloy IP65 housing, Ì 4 - M16 x 1.5 cable entries ideal for harsh environments Ì Available in solenoid-locking and solenoid-unlocking models Ì Patented self-aligning head, tolerates actua- Ì BG and CCC Approvals, UL Recognised tor misalignment The AZM161 Series is designed for machines/work cells where access to a hazardous Ì 2 N/C positive break safety + 1 N/O auxilia- work area must be controlled until safe conditions exist. Their solenoid-latching feature ry contact permits locking a machine guard until dangerous conditions, which may exist immediately Automation Ì 10A Thermal current after removal of power, have abated. Solenoid-latching may be controlled by a time delay, Ì Conforms to EN 1088, EN 60947-5-1 & motion detector, position sensor or other suitable component. The unit features independ- EN60204-1 ent actuator key (guard) position and solenoid-latching monitoring contacts. There is a me- 210322 chanical linkage preventing the solenoid position contacts from changing unless the key is Mftrs. Price Each inserted (guard closed). The AZM161 consists of an electromechanical safety interlock Voltage List No. Order Code 1+ 5+ 10+ switch section with positive-break NC contacts and an actuator key. In addition, the sole- 24V ac/dc 440G-L07264 327-6843 noid mechanism features 1 NO and 2 NC solenoid-latching monitoring contacts, and an 110V ac/dc 440G-L07263 327-6855 auxiliary manual unlocking device. The latter provided to aid in installation and for use in the event of a power failure. 230V ac/dc 440G-L07262 327-6867 630306 Operating Mftrs. Price Each AZM170 Safety Interlock Switch Contacts Voltage Connections List No. Order Code 1+ 37 Solenoid-Latching Machine Guard 2NO / 4NC 24V ac/dc Screw AZM161SK-12/12RK-024 189-0409●

● Machine Safety & Limit Switches The AZM170 Series is designed for ma- 2NO / 4NC 110/230V ac Screw AZM161SK-12/12RK-110/230 189-0410 chines/work cells where access to a haz- 2NO / 4NC 24V ac/dc Screw AZM161SK-12/12RKA-024 189-0411● ardous work area must be controlled until 2NO / 4NC 110/230V ac Screw AZM161SK-12/12RKA-110/230 189-0412● safe conditions exist. Their solenoid-latching feature permits 3NO / 3NC 230V ac Screw AZM161SK-33RK-M16-230VAC 189-0413● locking a machine guard until dangerous conditions, which may 3NO / 3NC 24V ac/dc Screw AZM161SK-33RK-M16-24V 189-0415● exist immediately after removal of power, have abated. Sole- Accessories noid-latching may be controlled by a time delay, motion detec- Actuator Key Small radius correcting AZM161-B1 189-0416● Body - H = 60, W = 90, tor, position sensor or other suitable component. The unit fea- Actuator Key Small radius correcting AZM161-B1E 189-0417● D = 30mm tures independent actuator key (guard) position and solenoid- latching pin position contacts. These permit the prevention of machine restart until the Actuator Key Radius correcting AZM161-B6 189-0418● guard is closed and the solenoid-latching pin is in the locked position. Triangular Key Manual Release AZM M5 KEY 189-0406● The AZM170 consists of an electromechanical safety interlock switch joined to a solenoid- latching mechanism. Both the safety switch and solenoid mechanism feature positive- break contacts. In addition the actuator key features a built-in latch and an auxiliary manual AZM190 Safety Interlock Switch unlocking device, the latter provided to aid in installation and for use in the event of a pow- Solenoid-Latching Machine Guard er failure (when using the unlocking by solenoid model). Each unit is supplied with a cord Ì Thermoplastic enclosure grip and a cap to seal the unused key entry port in the solenoid-latching mechanism. Ì Interlock with protection against incorrect locking. Ì Compact design Ì Screw terminals for fast installation Ì Actuating head can be repositioned by 4 x 90° Ì Meets IP67 washdown requirements Ì M20 x 5 Conduit cable entry Ì 2 cable entries M 20 x 1.5 Ì Highly tamper-resistants Ì Power-on or Power-off latching option Ì Manual release Ì Positive-break NC contacts Ì Built-in manual unlatching release Ì Wiring compartment Ì Two key entry locations Ì Padlockable key for added security dur- Ì Slim design, particularly suitable for fitting on hinged doors, alumini- Ì Rugged, corrosion-resistant, high-impact ing maintenance um profiles and fencing GRP housing Ì BG and CCC Approvals, UL Recognised Ì Sealing mechanism to prevent the ingress of dirt Ì Three styles of high-strength stainless Ì Cut clamp termination steel actuator keys Ì BG and CCC Approvals, UL Recognised 629441 Body - H = 60, W = 90, D = 30mm Operating Mftrs. Price Each 630271 Contacts Voltage Connec- List No. Order Code 1+ Operating Mftrs. Price Each tions Contacts Voltage ConnectionsList No. Order Code 1+ Spring to Lock / Power to Unlock 2NC / 1NO 24V dc Cut Clamp AZM 190-02/10RK-M20 24VDC 189-0400● ● 2NC 24V AC/DC IDC AZM170-02ZRK-24VAC/DC 189-0356 3NC 24V dc Cut Clamp AZM 190-02/01RK-M20-24VDC 189-0401● 2NC 230 VAC IDC AZM170-02ZRK-230VAC 189-0357● Accessories 1NO / 1NC 24V AC/DC IDC AZM170-11ZRK-24VAC/DC 189-0362● Actuator Key Positioning Tolerant AZM 190-B1 189-0403● 1NO / 1NC 230 VAC IDC AZM170-11ZRK-230VAC 189-0363● Actuator Key Flexible Angle AZM 190-B3/2X15 189-0404● 2NO / 2NC 24V AC/DC Screw AZM170SK-11/11-ZRK-2197-24V 189-0366● Mounting Plate Simple mounting - AZM190 MOUNTING PLATE MP190 189-0405● 1NO / 3NC 24V AC/DC Screw AZM170SK-11/02-ZRK-2197-24V 189-0367● Power to Lock TROUBLESHOOTING TIPS 2NC 24V AC/DC IDC AZM170-02ZRKA-24VAC/DC 189-0358● 2NC 230 VAC IDC AZM170-02ZRKA-230VAC 189-0361● Chat online to one of our 1NO / 1NC 24V AC/DC IDC AZM170-11ZRKA-24VAC/DC 189-0364● technical engineers at farnell.com 1NO / 1NC 230 VAC IDC AZM170-11ZRKA-230VAC 189-0365●

2861

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1 Farnell P 2862Date: 06-09-12 time:21:24

2862 farnell.com element14.com

AZM415 Safety Interlock Switch D4BL -Guard Lock Safety Interlocking Door Switch Heavy Duty Solenoid-Latching Metal Housing The AZM415 is designed for movable machine guards where access to a hazard- Ì Intended for guards that have to be closed ous work area must be controlled until during operation safe conditions exist. The solenoid-latch- Ì If guard is opened, the shut down time of ing feature permits locking a machine guard until dangerous machine is faster than access time to the conditions, which may exist immediately after removal of pow- danger zone. Body - H = 100, W = 141, er, have abated. Solenoid-latching may be controlled by a time- Ì Automatically locks when operating key is D = 46.5mm delay, motion detector, position sensor or other suitable com- inserted ponent. In addition the AZM415 features positive-break NC contacts, and an adjustable- Ì Locking mechanism released when voltage force ball latch which maintains a holding force on the guard when the key is in the un- is imposed on solenoid locked state. Ì Auxilary key allows easy maintenance and unlocks door in case of power failure Ì Solenoid-locking design Ì Adjustable actuator key holding force. Ì Equipped with horizontal and vertical con- Ì Highly tamper-resistant Ì Power to Unlock with manual release duit opening Ì Positive-break NC contacts configuration Ì Three different key types available Ì Meets IP67 washdown requirements. Ì Industrial-strength locking force. Ì Suitable for harsh environments Ì High-strength metal actuator key Ì Patented toggle-lever locking system Ì Rugged enamel-coated metal housing. Ì BG and CCC Approvals, UL Recognised Conformity Standards BIA / CSA / EN / IEC / UL Rated operational voltage 250V 630283 Rated impulse withstand voltage 4kV Operating Mftrs. Price Each Rated enclosed thermal current 10A Solenoid 24Vdc Contacts Voltage Connections List No. Order Code 1+ Positive opening travel 20mm 2NO / 2NC 24V AC/DC Cut Clamp AZM415-11/11ZPKE-24V 189-0407● Operating temperature -10 to 55°C°C Conduit entry PG13.5 Accessories Enclosure rating IP67 ● Actuator Key Small radius correcting AZ/AZM415-B2 189-0408 Dimension H=124 inc. head, W=115D=40 Triangular Key Manual Release AZM M5 KEY 189-0406● 210234 Mftrs Price Each AZ3350 Safety Interlock Switch Contacts List No. Order Code 1+ 5+ 10+ 25+ Automation Tamper Resistant - Movable Head Main Units The AZ3350 Series is designed for use with movable 3PST-2NC / 1NO D4BL-1DRA-A 326-999 machine guards/access gates which must be closed Acessories for operator safety. Their positive-opening NC contacts Straight Key D4BL-K1 327-001 provide a significantly higher level of safety than con- 90° Key D4BL-K2 327-013 ventional springdriven switches whose contacts can weld or stick shut. The switch’s tamper-resistant design prevents bypassing with simple tools, bent wires or other readily available means. Their rugged metal housing and IP67 Interlocking Solenoid Safety Switch rating make them ideal for interlocking safety guards in industrial and hostile SLM Series - Spring Force environments. Ì All elements are enclosed in one Body - H = 108, W = 40.5, D = 38mm metal housing 37 Ì Highly tamper-resistant to reduces liabil- Ì High resistance to heavy industrial Ì Rugged, corrosion-resistant die-cast ity exposure. use aluminum housing Ì Meets IP67 washdown requirements. Ì Compact housing for space saving installation Machine Safety & Limit Switches Ì Positive-break NC contacts Ì Four optional key entry locations Ì Triple coded actuator with high interference protection Ì 4A @ 250V ac/4A @ 24V dc switching Ì Funnel shaped key entry forgiving of key Ì Simple alteration of actuator approach direction in 90 Ì M20 x 1.5 Cable entry misalignment. positions Ì Screw terminals Ì BG and CCC Approved, UL Recognised Ì All switch functions enclosed in inner module 630261 Ì Safe and easy wiring due to terminals in separate con- Mftrs. Price Each nection area. Actuator Style List No. Order Code 1+ Ì Individual contact configurations possible Right Facing AZ 3350-12ZUEK 189-0375● Ì Integrated safety circuit protects against voltage peaks and incorrect termination Left Facing AZ 3350-12ZUEK-U90 189-0376● Body - H = 100, W = 91, D = 45mm Ì Mounting with M5 screws according to DIN EN 50041 O/A Height = 140mm Ì BG and CSA Approved, UL Recognised Safety Interlocking Door Switch Machines, which have a run down time after they have been switched off, are often part of D4NS with Polymer Housing automatic production processes. Safety devices should prevent access by the operator and must be kept locked until the dangerous movement has stopped. The safety-position Ì Intended for guards that have to be closed switch (with suitable control) will ensure that safety guards, doors and other covers are during operation kept closed as long as there is danger. The safety switch has three main functions: Ì If guard is opened, the shut down time of 1. Allowing the machine to operate while the guard is closed and locked. machine is faster than access time to the 2. Isolating the machine when the guard is open danger zone. 3. Monitoring the position of the guard and the actuator (open or closed) Ì Rotatable actuator head offering 5 key entry Construction design according to VDE 0660 part 200 IEC 947-5-1 control principles GS-ET positions 19 of the (German) employer’s liability insurance association Ì One or two conduit entry versions The SLM safety switch with lock has a spring interlocking design. The separate actuator is Ì Three different key types available securely mounted to the closing guard. When the actuator is inserted into the switch the Ì Enclosure rated at IP65 guard door position is then monitored and either locked or released (dependant on control system/status of machine). The separate actuator provides a very high level of operator in- 624387 terference protection because of its triple coding. The locking device in the SLM safety Mftrs Price Each switch is integrated into the switch housing. Locking is achieved with a spring mechanism. This links the actuator with a switch mechanism for position indication. Contacts List No. Order Code 1+ 10+ 50+ 100+ 630834 Price Each Single Entry Type SPST-1NO / 1NC D4NS-1AF 326-290 Mftrs. List No. Order Code 1+ 5+ 10+ 50+ SLM-FVTW 24DC-55-AR 189-3157● Dual Entry Type SPST-1NO / 1NC D4NS-5AF 326-320 Acessories Straight Key D4DS-K1 326-367● INTELLIGENT ONLINE BUYING 90° Key D4DS-K2 326-379● SYSTEM PROVIDING 90° Key - Adjustable D4DS-K3 326-392● Complete cost control, reduced administration time, visibility of your spend, flexibility and personalised to your company’s needs. farnell.com/ibuy

2862

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1 Farnell P 2863Date: 06-09-12 time:21:24

farnell.com element14.com 2863

Locking Safety Switch Mftrs. Price Each SLK Series Contacts List No. Order Code 1+ 5+ 10+ Ì 2000N Locking force 2 NC + 2 NO 6011629019 399-9531 Ì NO / 1 NC contact Ì Independent safety contacts separately monitor actuator (guard) position and lock status Safety Relays - Pilz Ì Vertical or horizontal actuator approach directions Ì Head rotates without removing screws Safety Relays - PNOZ X1 Ì Head securely locked when switch is mounted Category 2 EN 954-1 Ì 24V ac/dc operating voltage Ì Wide operating temperature range -25°C to +70°C Ì Sealed to IP67 624397 Mftrs. Price Each Actuator Type List No. Order Code 1+ 5+ 10+ Spring Lock 601.8119.011 331-673 Solenoid Lock 601.8119.003 331-752

Grab Wire Switches H=87, W=22.5, D=121 ‘Lifeline 4’ - Grabwire Operated (EN418) Ì Relay output 3 N/O safety, 1 N/C Aux. contact Ì Single channel input operation Ì LED status indication Safety switch operated by a red PVC coated steel Ì Feedback control loop for monioring of exter- Ì 35mm symmetric DIN rail mounting rope ’Grab wire’, (order separately) designed for the safeguarding of ex- nal contactors/relays Ì In accordance with EN 60204-1 posed machinery, conveyors and handling equipment. The switch which Ì 22.5mm wide housing Ì BG approval UL,cUL Recognised is immune to nuisance tripping caused by machine vibration, has been manufactured in accordance with EN418. Housed in yellow epoxy coated Operating voltage/s 24AC/DC Switching capability EN 60947-4-1 AC1 240V 5A-DC124V 4A heavy duty diecast alloy sealed to IP65. If the rope is pulled in an emer- EN 60947-5-1 AC1 230V 5A-DC13 24V 4A gency or cut, the safety contacts are operated force disconnecting the Reset function Manual or automatic selectable power. A latch ensures the machine cannot be reset until the hazard has Ambient temperature -10 to 55°C passed and the switch is reset by turning the blue reset knob. The unit al- Voltage/current at 24VAC/DC 20mA Automation so has an integral emergency stop button which operates the same Safety input circuit mechanism. A viewing window allows you to see the exact position of Output contacts must be protected by a suitable fuse H=69, the rope for easy setting and adjustment. A dial indicator shows the state Mftrs. List No. 774-300 PNOZ/X1/24V W=202.5, D=80 of the rope/system, machine ’RUN’, emergency stop ’ROPE PULLED’ or 210197 Fixing centres = ’SLACK WIRE’, the unit also has a rope tension indicator. Price Each M5 clearance Supplied with security type lid fixing screws and security bit. Voltage Order Code 1+ 5+ 10+ Note: It is strongly recommended by the factory inspectorate that one ’Lifeline’ switch is 24V ac/dc 599-736● installed at each end of the rope. For installations requiring less than 10m of coverage, it may be possible to use only one ’Lifeline’ with an anchor bolt at the other end,however, this must be carefully considered against the hazard that the machine represents. PNOZ X2/X2.1 Switch rating 1A @ 500V, 2A@250V, 5A@ 100V Category 4 EN 954-1 Contacts DPDT-2NO / 2NC(safety) Operating force <125N-300mm deflection 37 1 pair N/O (auxilliary) Conduit entry 3 x M20 or 3 x PG11 Operating temperature -25°C to 80°C

210170 Machine Safety & Limit Switches Entry Size Price Each Switch Mftrs. List No. Order Code 1+ 10+ 25+ 50+ M20 440E-L13042 773-724

Rope Tensioning System - LRTS

Unique rope tensioning system enabling quicker installation of rope operated emergency stop devices, including the Guardmaster Lifeline 3 and 4 products. The LRTS utilises a unique ten- H=87, W=22.5, D=121 sioning system and rope gripping method which Ì Relay output – 2 N/O safety contacts Ì X2-monitored manual reset offer a quick, simple and effective method of in- Ì Single/dual channel input operation with Ì X2.1-Automatic reset stallation. short-circuit detection Ì 35mm symmetric DIN rail mounting Ì Feedback control loop Ì In accordance with EN 60204-1 Ì Can be installed in approximately 3 minutes Ì Tensioner can be located at Ì 22.5mm wide housing Ì BG approval. UL,cUL Recognised Ì Kit includes: almost any position along the Ì LED status indication Two grippers (one for each end) + fixing instruc- rope Operating voltage/s 24AC/DC tions, One tensioner + allen key, Length of rope, Ì Tensioner accommodates up Switching capability EN 60947-4-1 AC1 240V 5A-DC124V 4A Eyebolts to 300mm of rope adjustment EN 60947-5-1 AC1 230V 5A-DC13 24V 4A Ì Simple installation - no specialist tools required Reset function Manual or automatic selectable2W 248128 Ambient temperature -10°C to 55°C Mftrs. Price Each Voltage/current at 24VAC/DC 25mA Length List No. Order Code 1+ 5+ 10+ Safety input circuit Output contacts must be protected by a suitable fuse 5m 440E-A13079 410-2629 Mftrs.List No. PNOZ/X2/24VACDC=599-748,PN02/X2.1/124VACDC=599-750 10m 440E-A13080 410-2630 210204 15m 440E-A13081 410-2642 Price Each Voltage Type Order Code 1+ 5+ 10+ Rope Safety Switch 24V ac/dc Manual reset 599-748 SR Series 24V ac/dc Auto/Man. Reset 599-750 Ì 2000N Locking force Ì NO / 1 NC contact Ì Independent safety contacts separately monitor actuator (guard) position and lock status Ì Vertical or horizontal actuator approach directions Ì Head rotates without removing screws Ì Head securely locked when switch is mounted Ì 24V ac/dc operating voltage Ì Wide operating temperature range -25°C to +70°C Ì Sealed to IP67 The first online technical portal for design engineers Log on, research, refine and design

624399

2863

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1 Farnell P 2864Date: 06-09-12 time:21:25

2864 farnell.com element14.com

Safety Relays - Pilz - continued PNOZ X7 24V DC/AC, PNOZ X7 AC Category 2 EN 954-1 PNOZ X2.8P Ì Relay output - 2N/O contacts. Category 4 EN 954-1 Safety relay Ì Single channel input operation Ì 35mm symmetric DIN rail Ì Relay output - 3N/O Safety con- Ì 22.5mm Slimline housing Ì Feedback control loop for mounting tacts. Ì LED status/power indication monitoring external contac- Ì Automatic or Manual reset Ì 1 N/C Auxillary contact Ì 35mm symmetric DIN rail tors/relays Ì For connection to E-stop Ì Single or dual-channel operation mounting Ì 22.5mm Slimline housing pushbuttons Ì Feedback control loop for moni- Ì Automatic or Manual reset Ì LED status/power indication Ì BG, UL, cUL approvals toring external contactors/relays Ì BG, UL approvals

H = 87mm, W = 22.5mm, D = 122mm H = 87mm, W = 22.5mm, D = 122mm Technical Data PNOZ X2.8P 24VAC/DC Technical Data PNOZ X7 24VAC/DC Operating voltage/s 24V/ac Operating voltage/s 24VDC/ac Switching capability EN 60947-4-1,02/01 Switching capability EN 60947-4-1,10/91 AC1 240V 6A/1500VA AC1 240V 6A/1500VA - DC1 24V 6A/150W DC1 24V 6A/150W EN 60947-5-1,11/97 EN 60947-5-1,10/91 AC15: 230V 5A AC15: 230V 5A - DC13: 24V 4A DC13: 24V 6A Reset function Manual or automatic selectable Reset function Manual or automatic selectable Ambient temperature -10°C to +55°C Ambient temperature -10°C to +55°C Voltage/current at reset circuit. 24V AC/DC 25mA Voltage/current at reset circuit. 24V AC/DC 50mA Output contacts 3(NO) Safety contacts Output contacts 2(NO) safety contacts 1 Auxiliary contact Output contacts must be protected by a suitable fuse. - 6A quick. 4A slow Output contacts must be protected by a suitable fuse. - 6A quick. 4A slow 311715 311728 Price Each Price Each Voltage Order Code 1+ 5+ 10+ Voltage Order Code 1+ 5+ 10+ 24VDC/AC 443-9314 24V ac/dc 443-9340 230VAC 443-9338 Automation PNOZ X3 Safety Relay Category 4 EN 954-1 PNOZ 1 Ì Emergency stop installations (NOT suitable for non-contact barriers such as light curtains) Ì Dynamic start not possible Ì 3 NO contacts Ì 1 NC positive guided signal contact Ì Supply voltage 24 to 240V ac, 24V dc Ì Standards - VDE 0113 part 1, 11/98 and EN 60204-1, 12/97 Ì Approvals - BG, CSA, INRS, SAQ and UL Recognised 37 H = 75, W = 90, D = 110mm 534121 H=87, W=45, D=121 Supply Mftrs. Price Each Ì Relay output 3 N/O safety, 1 N/C contact Ì 45mm wide housing Machine Safety & Limit Switches Voltage List No. Order Code 1+ 5+ 10+ Ì Single/dual channel input operation with short- Ì LED status indication ● circuit detection Ì 35mm symmetric DIN rail mounting 24 to 240VAC, 24VDC 775600 170-4488 Ì Feedback control loop for monitoring of exter- Ì In accordance with EN 60204-1 nal contactors/relays Ì BG approval. UL, cUL Recognised PNOZ1 Operating voltage 110V ac / 24V dc Category 3 EN 954-1 Switching capability EN 60947-4-1 AC1 240V 5A-DC124V 4A EN 60947-5-1 AC1 230V 5A-DC13 24V 4A Ì Relay output 3 N/O safety, 1 N/C aux contact Reset function Manual, monitored manual or automatic selectable Ì Single/dual channel input operation without short-circuit Ambient temperature -20 to 55°C detection Voltage/current at 24VAC/DC 25mA Ì Feedback control loop for monitoring of eternal contac- Safety input circuit tors/relays Output contacts must be protected by a suitable fuse Ì 90mm wide housing Mftrs.List No. PNOZ/X3/110VAC/24VDC Ì LED status indication 210205 Ì 35mm symmetric DIN rail mounting. Price Each Ì In accordance with EN 60204-1 H=75, W=90, D=110 Voltage Order Code 1+ 5+ 10+ Ì BG approval. UL, cUL Recognised Operating voltage/s 24AC/DC 110Vac/24Vdc 599-761 Switching capability EN 60947-4-1 AC1 240V 8A-DC124V 8A EN 60947-5-1 AC15 230V 5A-DC13 24V 7A Reset function Manual or automatic selectable PNOZ X4 Ambient temperature -10°C to 55°C Category 4 EN 954-1 Voltage/current at 24vDC 50mA Ì 45 mm P-97 housing, on standard rail, snap-on Safety input circuit Ì Relay output 3 N/O safety, 1 N/C aux. contact Output contacts must be protected by a suitable fuse Ì Low inrush current suitable for transistorised semi-conduc- Mftrs. List No. PNOZ 24V ac=179-655, PNOZ1 24V dc=179-656, PNOZ1 110V ac=530-578 tor outputs from light barriers eg. safety light curtains 210150 Ì Single/dual channel input operation with short-circuit detection Price Each Ì Connection possibilities for EMERGENCY STOP switch Safe- Voltage Order Code 1+ 5+ 10+ ty gate limit switch Start switch 24V AC 179-655 Ì 45mm wide housing 24V DC 179-656 Ì LED switching status indication for Channel 1 and 2 and 110V AC 530-578 Ì BG approval. UL, Power supply cUL Recognised Ì In accordance with EN 60204-1 Operating voltage/s 24VDC Switching capability EN 60947-4-1 AC1: 240V / 8A / 2000VA DC1: 240V / 8A / 200W FREE GLOBAL LEGISLATION SUPPORT EN 60947-5-1 AC15: 230V / 5A - DC13: 24V / 7A Reset function Manual, monitored manual or automatic selectable RoHS, REACH, WEEE, ErP, Batteries Ambient temperature -10 to 50°C Directive - latest updates, free white Voltage/current at 24VDC 40mA papers and live online Q&A at Safety input circuit element14.com/legislation Output contacts must be protected by a suitable fuse Mftrs.List No. PNOZ X4 248870 Price Each Voltage Order Code 1+ 5+ 10+ 24 Vdc 430-1237

2864

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1 Farnell P 2865Date: 06-09-12 time:21:25

farnell.com element14.com 2865

X1 - X2 contactor Normally closed Fixing 35mm DIN rail Safe Monitoring - PNOZsigma Monitoring loop Contactor loop Operating temperature -10 to +55°C PNOZ s1 Relay outputs 3NO / 1NC TUV approved Ì Safety gate monitor, Instantaneous E-STOP monitoring, Limit switch 210203 Ì Operating modes - Automatic start, Single-channel, Manual start Price Each Ì 2 NO Safety contacts Voltage Order Code 1+ 5+ 10+ 25+ Ì 1 semiconductor output Ì Supply voltage 24V dc 24Vac 599-384 Ì Standards - EN 60204-1, EN 62061, VDE 0113-1, EN 954-1 Ì Approvals - BG, CCC, GOST and UL Recognised MSR6R/T - Dual Channel Universal Monitoring ’Minotaur’ Ì Single or dual input channel oper- H = 98, W = 12.5, D = 120mm ation 534118 Ì Manual or automatic test/reset Supply Mftrs. Price Each Ì For use with interlocks and emer- Voltage List No. Order Code 1+ 5+ 10+ gency stop switches 24VDC 750101 170-4483● Ì Provides redundancy (2 channel) with circuit fault detection Ì Monitors contactors and 2 safety in- Safe Monitoring - PNOZsigma H=73, W=45, puts PNOZ s6.1 D=120 Ì Fail-safe internal monitoring Ì Safe monitoring of E-STOP, safety gate, light grid and two handed control Ì 3 NO Safety contacts Ì 1 NC auxiliary contact Ì 1 semiconductor output Ì Supply voltage 24V dc X1 - X2 contactor Normally closed Ì Standards - EN 954-1, VDE 0113-1, EN 574 TYPE III A, EN 60204-1, EN Monitoring loop Contactor loop 62061 Safety inputs 2 N/C Relay outputs 3NO / 1NC TUV approved Ì Approvals - BG, CCC and UL Recognised Fixing 35mm DIN Rail Operating temperature -10 to +55°C 210275

Mftrs. Price Each Automation H = 98, W = 22.5, D = 120mm Voltage List No. Order Code 1+ 5+ 10+ 25+ 534117 24VAC/DC 440R-C23017 305-5334 Supply Mftrs. Price Each 110VAC 440R-C23018 305-5346 Voltage List No. Order Code 1+ 5+ 10+ 230VAC 440R-C23019 305-5358 24VDC 750126 170-4482● Safety Relays - Schmersal Safe Monitoring - PNOZsigma PNOZ s4 Safety Controllers and Monitors Ì Safety gate monitor, Instantaneous E_STOP monitoring, Light barrier monitor- DIN Rail Mounting ing, Cat.2 w/o tp, Light barrier mon. Cat.2 w/ tp, Limit switch Ì BG Approval, UL Recognised 37 Ì Operating modes - Dual-channel, Without detection of shorts across contacts, Ì Applications include: monitored manual reset, Manual start, Single channel, Automatic start, self A - Safety Sensors

test, Detection of shorts across contacts, Start-up testing B - Guard system Machine Safety & Limit Switches Ì 3 NO Safety contacts C - Emergency-Stop button Ì 1 NC auxiliary contact Ì Standards - VDE 0113-1, EN 574-1, EN D - Pull-wire emergency stop switches Ì 1 semiconductor output 60204-1, EN 62061, EN 60204-1 E - Safety light curtain Ì Supply voltage 24V dc Ì Approvals - BG, CCC and UL Recognised F - Two hand control panels

H = 96, W = 22.5, D = 120mm 534119 H = 100, D = 121mm Supply Mftrs. Price Each 629388 Voltage List No. Order Code 1+ 5+ 10+ Width Supply Mftrs. Price Each 48 to 240V ac/dc 750134 170-4484● (mm) Voltage Application List No. Order Code 1+ 24VDC 750104 170-4486● 22.5 24V dc A and B AES1135 (24VDC) 189-0337● 22.5 24V dc A and B AES1235 (24VDC) 189-0338● Safe Monitoring - PNOZsigma 48 24V dc A and B AES6112 24VDC 189-0339● PNOZ s7 22.5 24V dc / 24V ac A, B, C and D SRB301AN-24VACDC 189-0340● ● Ì Safety gate, E-STOP, Light grid and Two-hand control 22.5 24V dc A, B, C, D and E SRB301ST-V2-24VDC 189-0341 Ì Operating modes - Without detection of shorts across contacts, Single-channel 45 24V dc / 24V ac / 230V ac B, C, D and E SRB302X3-24V 189-0345● Ì 3 NO Safety contacts 22.5 24V dc / 24V ac A, B, C, D and E SRB 301MC 24V 189-0346● Ì 1 NC auxiliary contact 45 230V ac A, B, C and D SRB 207AN-230V 189-0348● Ì 1 semiconductor output 45 24V dc A, B, C and D SRB 207AN-24V 189-0349● Ì Supply voltage 24V dc 22.5 24V dc F SRB 201ZH 24V 189-0350● Ì Standards - EN 954-1, EN ISO 13849-1 45 24V dc / 24V ac A, B, C, D and E SRB 324ST 24V 189-0351● Ì Approvals - BG, CCC, GOST and UL Recognised Input Expanders H = 98, W = 17.5, D = 120mm 534120 DIN Rail Mounting Supply Mftrs. Price Each Input expansion modules provide more and clear vi- Voltage List No. Order Code 1+ 5+ 10+ sualisation also diagnostic signals and time saving 24VDC 750107 170-4487● in the wiring of series connections in safety circuits. Up to 4 (2-channel) emergency stop control devices, safety switches and/or other protective devices with floating con- Safety Relays - Guardmaster tacts can be connected to every module by means of 1:1 wiring of the safety contacts. Up to 20 modules (80 sensors) can be cascaded togeth- MSR5T - Single Channel Monitoring er in this fashion. ’Minotaur’ H = 126, W = 48, D = 61mm Ì For use with interlock and emergency stop Ì UL Recognised Ì Applications include: switches Ì 24V dc Operating voltage A - Safety Sensors C - Emergency-Stop button Ì 3 N/O and 1 N/C outputs with contactor moni- B - Guard system D - Pull-wire emergency stop switches toring 629426 Ì Switches up to 4A @ 250V ac Monitored Mftrs. Price Each Ì Full internal monitoring Ì Can be used as an intermediate relay with en- Inputs List No. Order Code 1+ sured safety functions 2 NC PROTECT- IE-02 189-0342● 1NO + 1NC PROTECT-IE-11 189-0343● H=100mm, W=22mm, D=110mm

2865

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1 Farnell P 2866Date: 06-09-12 time:21:25

2866 farnell.com element14.com

Safety Relays - Schmersal - continued Mftrs. Price Each Voltage List No. Order Code 1+ 5+ 10+ Output Expander Universal DIN Rail Mounting 24VAC/DC XPSAC5121 427-5913 Output expanders with adjustable delay fulfil Stop Cate- 2 Hand control monitoring gory 1 to EN 60204-1 and are used in order to securely 24VDC XPSBF1132 427-5986 switch off variable speed drives, for example. Depending E.stop and safety circuits requiring time delay on the external circuit arrangement, it is possible to secure the guard device up to Control Category 4 to EN 954-1. This output ex- 24VDCAC/DC XPSAV11113 501-9060 pander operates using conventional relay technology. The unit has redunant Emergency stop circuit internal design. It is equipped with safety relays with monitored posi- 24VAC/DC XPSAF5130 501-9059 tive-guided contacts. The enabling paths comprise the relay contacts wired in E.stop, Light curtain and Safety footmats series. 24VAC/DC XPSAK311144 501-9072 H = 100, W = 22.5, D = 121mm Ì Expander module for contact expansion Ì LED to show switching conditions Safety Relays - Phoenix Contact Ì 24V dc Operating voltage Ì Control category 4 to EN 954-1 depend- Ì 4 enabling paths ing on the used safety relay module Universal Safety Relay Ì 2 indication contacts (NC) Ì UL Recognised 629433 PSR-SCF Series Mftrs. Price Each Ì Two PDT contacts List No. Order Code 1+ Ì Safe isolation (input/output) SRB 402EM-24V 189-0344● Ì Housing width 17.5 mm Ì Operating temperature ranges from -20°C to +50°C Input voltage 24 V AC/DC Safety Relays - Telemecanique Input current 30 mA Contact material AgNi Preventa XPS - Safety Relays Mounting Type DIN rail W= 17.5mm, H= 75mm, D= 60.5mm 644241

Automation Mftrs. Price Each List No. Order Code 1+ 2+ 5+ 10+ PSR-SCF-24UC/URM /2X21 206-4582●

Safety Relays PSR-SCP Series Ì Safety category 4 according to EN 954-1 XPSACXPSAF XPSTSW Ì Plug-in screw or spring-cage connection terminal blocks Ì Safe isolation 37 Ì Certifications: CUL, GOST, TUEV-RH and UL Ì Standards/regulations: DIN EN 50178 / VDE 0160

Operating temperature -20°C to +55°C Machine Safety & Limit Switches Input voltage 24 V AC/DC Switching current max. 6 A H= 99mm, W= 22.5mm, D= 114.5mm

Input Contact Mftrs Order XPSAV XPSAK XPSMP Current Configuration List No. Code 60mA 2NO / 1NC PSR-SCP- 24UC/THC4/2X1/1X2 206-4570 Ì Internal electronic fuse protection Ì Start button monitoring or automatic 47mA 5NO / 2NC PSR-SCP-24UC/URM /5X1/2X2 206-4572 Ì Normally open safety relay outputs starting available 90mA 5NO / 1NC PSR-SCP-24UC/URM4/5X1/2X2/B 206-4580 Ì Normally closed signalling contacts and solid Ì BG and CSA product certification 644242 state "status" outputs available Ì UL Recognised Description Price Each Ì Suitable for safety categories within EN954 Order Code 1+ 2+ 5+ Dimensions Safety relay for two-hand trip guards 206-4570● Type H W D Universal safety relay with positively driven contacts 206-4572● XPS AC 99 22.5 111 Safety relay as a contact extension block 206-4580● XPS BF 99 22.5 114 XP SAV 99 45 114 Safety Relays XPS AF 99 22.5 114 XPS AK 99 45 114

Start button Solid monitoring or State automatic LED/ Type Functionality Outputs (signalling) starting Buttons XPS AC Emergency stop 3NO / 1NC 4 No 2 XPS BF Two hand DPNO 2 No 3 control monitoring XPS AF Emergency stop 3NO - Yes 3 XPS AK Emergency stop, light 3NO 1 NC + 4 Yes 4 curtain 7 safety footmats solid state For 2 Hand Trip Universal 5N/O-2NC 5 Channel Extension XPS AV Emergency stop 3NO 3 solid state Yes 11 PSR-SCP- 24UC/THC4/2X1/1X2 Supply Voltage 24Vac/dc Safety relay for two-hand trip guards to EN 574 type IIIC, Simultaneously monitoring < 0.5 Min. voltage & current 18V / 90mA s, 2 N/O contacts, 1 N/C contact, safe isolation, pluggable connecting terminal blocks, Response time (on output opening) 40ms (XPSDM* 20ms, XPSAV*30ms) width: 22.5 mm. Operating temperature -10° to 55°C Standards EN954-1, EN1088 PSR-SCP-24UC/URM /5X1/2X2 246458 Universal safety relay with forcibly guided contacts, 5 N/O contacts, 2 N/C contacts, single-channel, pluggable terminal blocks with screw connection, width: 22.5 mm. PSR-SCP-24UC/URM4/5X1/2X2/B Single or double channel contact extension, 5 N/O contacts, 1 N/C contact, 1 confirmation current path, plug-in connection terminal blocks with screw connection, width: 22.5 mm Coil Volts Input Contact Mftrs. (V DC/AC) Current (mA) Configuration List No. Order Code 24 60 2NO / 1NC PSR-SCP- 24UC/THC4/2X1/1X2 206-4570 24 47 5NO / 2NC PSR-SCP-24UC/URM /5X1/2X2 206-4572 24 90 5NO / 1NC PSR-SCP-24UC/URM4/5X1/2X2/B 206-4580

2866

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1 Farnell P 2867Date: 06-09-12 time:21:25

farnell.com element14.com 2867

660330 Dimensions (mm) Mftrs. Price Each Monitoring Relays Height WidthDepth List No. Order Code 1+ 2+ 5+ Supply Monitoring Relays 99 22.5 114.5 PSR-SCP- 24UC/THC4/2X1/1X2 206-4570● SM 501 and SM 500 Series 99 22.5 114.5 PSR-SCP-24UC/URM /5X1/2X2 206-4572● 99 22.5 114.5PSR-SCP-24UC/URM4/5X1/2X2/B206-4580●

Safety Relays ESTOP

SAFETY RELAY, ESTOP SAFETY DOOR SIL3 Safety relay to emergency stop and safety door monitoring up to SIL 2 or Cat. 2, PL d according to EN ISO 13849, one-channel operation, automatically or manually supervised activation, 4 enabling current paths, nominal input voltage 24 V AC/DC

SM 500 SM 501 W= 36mm, H= 90mm, D= 60mm

661644 Ì Protects against phase loss, phase reversal and phase-phase unbalance Ì LED indication for all faults and for change in settings during run time for better security Mftrs. Price Each Ì Selectable Under voltage / over voltage / asymmetry levels List No. Order Code 1+ 2+ 5+ Ì Adjustable time delay PSR-SCP-24UC/ESA4/2X1/1X2 206-4573● Ì Selectable over/under voltage trip level PSR-SCP-24UC/ESA4/3X1/1X2/B 206-4574● Ì Model for selectable phase asymmetry PSR-SCP-24UC/ESM4/3X1/1X2/B 206-4575● Ì LED indications for power and fault conditions PSR-SCP-24UC/ESA2/4X1/1X2/B 206-4576● Ì Voltage sensing principle PSR-SCP-24UC/ESAM4/8X1/1X2 206-4577● Operating temperature -10°C to +55°C ON dealy SM 501: 0.5 to 15 sec

Frequency 48 to 63 Hz SM 500: 0 to 15 sec Automation PSR-SCP-24DC/ESP4/2X1/1X2 206-4578● Degree of protection IP20 for terminals and IP40 for Enclosures OFF Delay 5 sec PSR-SPP-24DC/ESP4/2X1/1X2 206-4579● Relay output 2 C/O (DPDT) PSR-SCP-24-230UC/ESAM4/3X1/1X2 206-4581● 644098 PSR-SCP-24DC/ESD/5X1/1X2/300 206-4584● Supply Power Mftrs. Price Each PSR-SPP-24DC/SDC4/2X1/B 206-4585● Voltage Consumption List No. Order Code 1+ 2+ 5+ ● PSR-SCP-24DC/ESD /4X1/30 206-4598 SM 501 415 VAC 10 VA MG53BH 206-4124● Safety Relays SM 500 240 VAC 5 VA MG73BH 206-4125● 37 Supply Monitoring Relays SM 175 Series Machine Safety & Limit Switches Ì Controls correct sequence of three phas- es and own supply voltage Ì LED indication for all faults and for change in settings during run time for better security Ì Selectable under voltage / over voltage / asymmetry levels Ì Adjustable time delay Safety Relays Supply voltage 208 to 480 VAC Safety relay to emergency stop and safety door switch with N/O contact / N/C contact or Power consumption 3 VA N/C contact / N/C contact and light grid up to SIL 3 or Cat. 4, PL e according to EN ISO Operating temperature -15°C to +60°C 13849, 2 N/O contacts, TBUS interface, automatic or manual activation Degree of protection IP20 for terminals and IP40 for Enclosures Contact Extensions Relay output 1 C/O (SPDT) Single-channel contact extension with TBUS interface, 4 N/O contacts, 1 N/C contact, 1 ON dealy 0.5 to 100 sec confirmation current path, the contacts have a release delay (0.3 s - 3 s), Cat. 3 PL e ac- OFF Delay 5 sec cording to EN 13849, pluggable terminal blocks with spring-cage connection, width: 2.5 mm Safety Modules Freely configurable safety module for monitoring emergency stop, safety doors, light grids W= 18mm, H= 90mm, D= 59mm with 20 safe inputs and 4 safe outputs; 4 alarm, 2 clock and 2 ground switching outputs; 644121 non safety expandable over Bus-Gateways. Width: 67.5 mm Mftrs. Price Each 661339 List No. Order Code 1+ 2+ 5+ Mftrs. Price Each MG21DH 206-4123● List No. Order Code 1+ 2+ 5+ Safety Relay PSR-SCP-24DC/SDC4/2X1/B 206-4586● Contact Extensions PSR-SPP-24DC/URD3/4X1/2X2 206-4587● PSR-SCP-24DC/URD3/4X1/2X2 206-4588● PSR-SPP-24DC/URM4/4X1/2X2/B 206-4593● PSR-SCP-24DC/URM4/4X1/2X2/B 206-4594● PSR-SPP-24DC/URD3/4X1/2X2/3 206-4596● PSR-SCP-24DC/URD3/4X1/2X2/3 206-4597● Safety Modules PSR-SCP-24DC/TS/S 206-4604● PSR-SPP-24DC/TS/S 206-4605●

TROUBLESHOOTING TIPS Chat online to one of our technical engineers at farnell.com The first online technical portal for design engineers Log on, research, refine and design

2867

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1 Farnell P 2868Date: 06-09-12 time:21:25

2868 farnell.com element14.com

Monitoring Relays - continued Limit Switches - Bernstein Earth Leakage Relays Safety Cable Pull Switch CMR Series SRM Series Ì Maximum span length 37.5 metres Ì Monitors, detects and protects Ì Rope tension indicator power systems from earth leakage Ì Continuously variable adjustment of faults the rope tension Ì Instantaneous trip for 5 times of Ì Cable entry 3 x M20 x 1.5 set value of leakage current Ì Protection class IP67 to IEC/EN 60529 Ì Test feature to check complete product functionality Ì Enclosure manufactured from aluminium Ì LED indication for relay status, CT open, earth leakage Ì Actuator can be repositioned by 4 x 90° fault and test/reset switch short Ì Connection designation conforming to DIN EN 50013 Ì Manual/remote reset feature Ì 3A @ 240V ac (AC-15) Switching capacity Ì 1 C/O and 1 NO relay output Body - W = 90, D = 53mm O/A Height = 197mm Ì BG and CSA Approved Earth leakage current 30 mA to 30 A Frequency 50/60 Hz The SRM safety cable pull switching device is designed and approved in accordance with Operating temperature -15°C to +60°C the standards IEC 947-5-5, DIN EN 60947-5-5 and ISO 13850, i.e. on actuation or in the Humidity 95% (Rh) event of cable breakage, the emergency stop switching device locks automatically and can Degree of protection IP20 for terminals and IP40 for Enclosures only be reset to its initial setting by means of the resetting device on the switch. In order 644086 for the overall system to conform to the standards EN 60947-5-5 and EN 13850 governing Mftrs. Price Each the emergency stop function of cable pull switches it is necessary to integrate a spring in Description List No. Order Code 1+ 2+ 5+ the system. The reasoning behind this requirement is that a person who triggers the emergency stop functions does not need to consider the activation direction. With the spring it ● 110 to 240 VAC, Manual Reset 17G715GF2 206-4126 is possible to pull the cable in the direction of the cable pull switch, thus activating the 220 to 415 VAC, Manual Reset 17G745GF2 206-4127● emergency stop function. Safety cable pull switches may only be used in control power 35 mm, Core balanced CT 17H7NNHN3 206-4128● circuits. Safety cable pull switches are used on accessible sides of conveyor systems or 65 mm, Core balanced CT 17H7NNIN3 206-4129● machines. In contrast to Emergency Stop switching devices (e.g. mushroom pushbuttons) 100 mm, Core balanced CT 17H7NNJN3 206-4130● installed at intervals, with which the emergency stop signal can only be generated at the device itself, with the safety cable pull switch it is possible to generate the signal at any Machine Warning Devices point in a section. With this switching device a span of up to 37.5 m can be achieved with

Automation a pull cable connected to the pulling element. The maximum possible span length of a pull cable switch is always dependent on the temperature fluctuations to which the system is Stacking Beacons - XVB Series exposed. It is possible that the pull cable switch may trip due to the fact that, owing to its temperature coefficient, the length of the steel cable can change in response to changes in Ì Stacking beacons of temperature. Ultimately, this change in length is dependent on the length of the cable, the 70mm diameter, com- difference in the temperature change and the type of springs used in the pull cable switch. posed of light and sound modules 630778 Ì Simultaneous assembly and interlocking of units Ì Available with either incandescent or LED illumination Actuator Price Each Ì May be assembled with up to 5 light modules or 4 light Style Contacts Mftrs. List No. Order Code 1+ 5+ 10+ modules and 1 sound module Slow-Action Contacts Ì Buzzer has continuous and intermittent modes Eye 2NO / 2NC SRM-U1Z/U1Z-LV-175-E 189-3148● Ì Base & cover need to be ordered separately for mount- 37 ing Accessories - Pull Cable - Counterspring Ì Coloured pins are used to indicate the position of lens SR 175N TENSIONER SPRING WITH QUICK FIX 189-3149● Ì Fixing of modules does not require specific tools Machine Safety & Limit Switches Ì Incandescent light units need bulb, available separately Ì Protection to IP67 Standard Cable Pull Switch 624546 SEM and SIEM Series Mftrs. Price Each Stackable Units List No. Order Code 1+ 5+ 10+ Static Beacons - Bulb 5 to 10W (Not included) Green XVB-C33 371-5115 Red XVB-C34 371-5127 Ì Maximum span length 6m Orange XVB-C35 371-5139 Ì Aliminium case Blue XVB-C36 371-5140 Ì IP65 protection class Yellow XVB-C38 371-5164 Ì 1 x M20 x 1.5 Cable entry Ì 3A @ 240V ac Switching Static Beacons - LED 24V capacity (AC-15) Green XVB-C2B3 371-5577 Red XVB-C2B4 371-5589 SEM/SIEM2 Orange XVB-C2B5 371-5590 SIEM2 RAST Body - H = 77.5, W = 40, Body - H = 77.5, W = 40, Yellow XVB-C2B8 371-5620 D = 42mm D = 42mm For Stackable Units These cable pull switches are designed for use exclusively as safety command devices. Buzzer12 to 48V XVB-C9B ac/V dc 371-5279 The switching elements are enclosed within metal enclosures and are operated manually by pulling on the attached cable. Thanks to their pretension, these switches, which feature Replacement LEDs 24V a switching contact with overlap, execute a switching function when the cable is pulled or Green DL1-BDB3 371-5292 in the event of cable breakage. Red DL1-BDB4 371-5309 The specified cable length refers to the maximum length at minimum temperature variation. Replacement LED 230V The maximum cable length may decrease under different environmental conditions. 630790 Green DL1-BDM3 371-5371 Price Each Accessories Type Mftrs. List No. Order Code 1+ 5+ 10+ 50+ Perpendicular foot XVB-C12 371-5474 Base and Cover XVB-C21 371-5413 Switches Bulbs - BA15D 7W Sold in packs of 10 Price per Pack 1+ 5+ 10+ Variant 1 SEM2-U1Z 189-3153● ● 12V DL1BEJ 871-3316 Variant 2 SIEM2-UV1Z 189-3155 ● 24V DL1BEB 871-3324 Variant 1 SIEM2-UV1Z RAST 189-3156 120V DL1BEG 871-3340 Accessories - Rope Pull Kits 230V DL1BEM 871-3359 2m long TP4-SR5 189-3150● 10m long TP4-SR10 189-3151● ● IMPROVED BACK ORDER DELIVERY 15m long TP4-SR15 189-3152

Receive email updates with the exact status, due date and despatch information of all your back order items farnell.com

2868

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1 Farnell P 2869Date: 06-09-12 time:21:26

farnell.com element14.com 2869

Plastic Enclosed Limit Switches Price Each Plunger Mftrs. List No. Order Code 1+ 5+ 10+ i88 Series Ì Snap-on cover can be released 1NC, 1NO Slow make/break608-8103-001 320-4870 with screwdriver 1NC, 1NO Snap-action 608-8153-002 320-4893 Ì Cover opening range 135° (cov- 2NC Snap-action 608-8853-004 320-4900 er can also be detached from hinge) Roller Plunger Ì Cover protects switching element during installation 1NC, 1NO Slow make/break608-8117-007 320-5046 Ì Screw connections with self-lifting clamping plates 1NC, 1NO Snap-action 608-8167-008 320-5060 Ì Easy-action cover lock (close and press) 2NC Snap-action 608-8867-010 320-5071 Ì Cover additionally secured with screw Roller Lever Roller Plunger Plunger Ì Cable entry M16 x 1.5 Body - H = 62, W RAST Version Ì Standard switch conforming to DIN EN 50047 1NC, 1NO Slow make/break608-8121-015 320-5083 = 31, D = 30.5mm Ì Protection class IP65 to VDE 0470 T1 1NC, 1NO Snap-action 608-8171-016 320-5101 Ì 3A @ 240V ac Switching Ì Enclosure and cover PA 6, self-extinguishing (UL-94- 2NC Snap-action 608-8871-018 320-5113 capacity (AC-15) V0) Turret Roller Lever Ì CSA Approved, UL Recog- Ì Actuator can be repositioned by 4 x 90° 1NC, 1NO Slow make/break608-8135-021 320-5125 nised Ì Connection designation conforming to DIN EN 50013 1NC, 1NO Snap-action 608-8185-022 320-5149 630776 Actuator Price Each Style Contacts Mftrs. List No. Order Code 1+ 5+ 10+ Standard DIN 50041 Insulated Slow-Action Contacts Plastic Body - ENK Series Plunger-W (Form B) 1NC / 1NO I88-U1Z W 189-3135● Ì High quality plastic body Ì Rugged metal actuator heads Plunger-W (Form B) 2NC I88-A2Z W 189-3137● Ì Suitable for limit of safety applications (NOT ● Roller Plunger-RIWK (FormC) 1NC / 1NO I88-U1Z RIW K 189-3139 Adjustable or Wobble stick) Roller Plunger-HW RO11 1NC / 1NO I88-U1Z HW 189-3143● Ì Hinged snap-shut lid seals to IP65 Roller Plunger-HW RO11 2NC I88-A2Z HW 189-3145● Ì Positive drive forced disconnect on all NC Snap-Action Contacts contacts Plunger-W (Form B) 1NC / 1NO I88-SU1Z W 189-3136● Ì CSA Approved, UL Recognised ● Body - H = 73.5 (excluding head), W = 40, D = 40mm Plunger-W RAST 1NC / 1NO I88-U1Z W RAST 189-3138 624554 Automation ● Roller Plunger-RIWK (FormC) 1NC / 1NO I88-SU1Z RIW L 189-3140 Switch Price Each Roller Plunger-RIWK (FormC) 2NC I88-A2Z RIW L 189-3141● Contacts Action Mftrs. List No. Order Code 1+ 5+ 10+ Roller Plunger-HW RO11 1NC / 1NO I88-SU1Z HW 189-3144● Roller Lever-AH (Form A) 1NC / 1NO I88-U1Z AH 189-3146● Plunger Roller Lever-AH (Form A) 1NC / 1NO I88-SU1Z AH 189-3147● 1NC, 1NO Snap action 608-1152-007 320-5174 Roller Plunger Safety Action - Sub-Miniature 1NC, 1NO Snap action 608-1167-008 320-5204 Combi 2 Series Turret Roller Lever Ì Glass-fibre reinforced PBT enclosure 1NC, 1NO Slow make/break 608-1135-003 320-5230 Ì Compact switches for safety or con- 1NC, 1NO Snap action 608-1185-009 320-5241 37 trol applications Adjustable Turret Roller Lever Ì All NC contacts are positive break 1NC, 1NO Snap action 608-1186-018 320-5307 Ì Galvanically isolated terminals Ì Rectangular cable entries Wobble Stick Machine Safety & Limit Switches 1NC, 1NO Snap action 608-1190-045 320-8746 Body - H = 34 (excluding head), W = 26, D = 21mm Ì 4 screw-type M3.5 connections with self-lifting clamps Ì CSA Approved and UL Recognised Ì Self-extinguishing to UL 94-V0 624562 Standard DIN 50041 Switch Price Each Metal Body - ENM2 Series Contacts Action Mftrs. List No. Order Code 1+ 5+ 10+ Ì Die-cast metal body Ì Rugged metal actuator heads Plunger Ì Suitable for limit of safety applications (NOT 1NC, 1NO Slow make/break 600-8101-001 320-4674 Adjustable or Wobble stick) Adjustable Plunger Ì Hinged snap-shut lid seals to IP65 Ì Positive drive forced disconnect on all NC 1NC, 1NO Slow make/break 600-8104-025 320-4728 contacts 2NO Slow make/break 600-8804-029 320-4741 Ì CSA Approved, UL Recognised 1NC, 1NO Snap action 600-8354-026 320-4753 Body - H = 77.5 (excluding head), W = 40, D = 42mm Roller Plunger 624558 1NC, 1NO Slow make/break C2-U1ZR 306-0056 Switch Price Each 2NC Slow make/break C2-A2ZR 306-0081 Contacts Action Mftrs. List No. Order Code 1+ 5+ 10+ 2NO Slow make/break C2-E2R 306-0070 1NC, 1NO Snap action C2-SU1ZR 306-0068 Plunger 2NC Snap action 600-8866-016 1NC, 1NO Snap action 608-7352-002 320-5344 ROLLER 320-4819 Roller Plunger Adjustable Button 1NC, 1NO Snap action 608-7367-005 320-5368 2NC Snap action 600-8857-022 320-4868 Turret Roller Lever 1NC, 1NO Snap action 608-7385-014 320-5381 Safety Action, Sub-Miniature Adjustable Turret Roller Lever ’Tiny 2’ 1NC, 1NO Snap action 608-7386-017 320-5400 Ì Slow make/break or Snap-action Ì Positive drive forced disconnect on all Adjustable Rod Lever NC contacts 1NC, 1NO Snap action 608-7387-019 320-5423 Ì 1NO, 1NC or 2NC contacts Wobble Stick Ì Suitable for limit or safety applications 1NC, 1NO Snap action 608-7390-032 320-5435 Ì Hinged snap-shut lid sealed to IP65 Ì Mounting to DIN50047 INTELLIGENT ONLINE BUYING Body H=45 (excluding head), W=30, D=27 Fixing centres = 22/23mm SYSTEM PROVIDING Housing (Thermoplastic (UL94-VO) Max voltage 250Vac Complete cost control, reduced Operating temp -30°C to +80°C Thermal current Ith10A administration time, visibility of your Mechanical life 3 x 106 switch operations Approvals UL Recognised, CSA, BG Max inrush current IEC 947-5-1, AC 15, DC 13 Cable entry M16 spend, flexibility and personalised to 210301 your company’s needs. farnell.com/ibuy

2869

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1 Farnell P 2870Date: 06-09-12 time:21:26

2870 farnell.com element14.com

Limit Switches - Camdenboss Limit Switches - Honeywell Limit Switches Wireless Limit Switches Series CE Limitless™ Series Ì Double insu- Ì Radio (license-free and global): WPAN 802.15.4, 2.4 GHz, point- lated plastic to-point Ì Snap action Ì FCC 15, IC, ACMA & ETSI contacts Ì EMI Immunity Ì Other types avaliable Ì Up to 304 m [1000 ft] communication range when used with a Ì Rated to IP67 Limitless™ wireless monitor or receiver module (sold separately) Ì Reliable, flexible, and secure wireless transmission Ì Standard replaceable battery with ultra-low power consumption Operating Time 0.05mm - 1ms Switching Frequencey 3600 cycles/h Ì Direct or remote mount antenna options Shock Resistance 50g Short circuit protection 10A gG fuse SWITCH Ì Side rotary, momentary lever with Rated Voltage AC 400 V Operating Temperature -25°C to +70°C Rated Voltage DC 250 V Degree of Protection IP67 Ì EN50041 metal enclo- roller Current Rating AC 10 A Switch Operation Snap Action sure Ì Modular construction of components Current Rating DC 2.8 A Ì IP67; NEMA 1,4,12,13 Ì Design for ease of installation 657703 Honeywell Limitless™ series of wireless limit switches combine great flexibility with proven Mftrs. Price Each harsh-duty packaging to increase efficiencies and improve safety for machines, equipment, Actuator Style List No. Order Code 1+ 2+ 5+ OEMs, and operators. The new Limitless™ Series of switches and monitors offers a new Roller Button CE10.00.BI 208-3390● way of working that delivers more flexibility, more up time, more reliability, and more free- Roller Lever CE10.00.EI 208-3391● dom. This technology has been developed to be a truly cutting-edge, cost-saving solution. Adjustable Roller Lever CE10.00.FI 208-3392● The new Limitless™ product line combines the best of MICRO SWITCH™ global switches ™ Roller Lever CE10.00.II 208-3393● with wireless technology. Limitless WGLA Series limit switches feature the latest com- Plain Plunger CE21.00.AM 208-3394● mercial off-the-shelf wireless technology, especially beneficial for remote monitoring applications where wiring, or wiring maintenance, is not physically possible or economically Roller Plunger CE21.00.BM 208-3396● feasible. Limitless™ wireless switches and monitors use 802.15.4 as it is license free, ● Roller Lever CE21.00.EM 208-3397 globally acceptable, and requires low power consumption. They also employ WLAN RF 2.4 Adjustable Roller Lever CE21.00.FM 208-3398● GHz standard radio bands, conform to international IEEE 802.15.4 standards, and feature a Plain Plunger CE31.00.AM 208-3399● 16-bit address and 128-bit security key. Automation Roller Lever CE31.00.CM 208-3400● Up to 16 Limitless™ switches may be networked together and paired with one Limitless™ Roller Plunger CE70.0.BLM 208-3402● WPMM monitor. When used together, Limitless™ components have up to a 304 m [1000 Roller Lever CE70.0.EM/2 208-3403● ft] line-of-sight communication range. These switches may be used in a variety of remote Adjustable Roller Lever CE70.0.FM/2 208-3404● monitoring applications, including valves, construction/agricultural machines, cranes, grain diverters/flaps, lifts, material handling, door positioning, conveyors, presses, and specialty machines. Metal Casing 609550 Price Each 10A Max. AC, 2.8A Max. DC Mftrs. List No. Order Code 1+ WGLA Series - Side Roller Switch Nylon Roller WGLA1A01BA1A 182-3460● 37 Steel Roller WGLA1A01BA1B 182-3461● WPMM Series - Monitor 3dBi with remote adhesive mount/9.8 foot cable WPMM1A03B 182-3463● Machine Safety & Limit Switches 3.5dBi with remote magnetic swivel mount/10 foot cable WPMM1A05B 182-3464● CE10 Series CE41 Series CE70 Series Ì Operating current AC15 - 10A @ 24V ac, 1.8A @ 400V ac Ì Operating current DC13 - 2.8A @ 24V dc, 0.27A @ 250V dc GLL Series Limit Switches Ì Devices conform to IEC 947-5-1and EN 60 947-5-1 Standards Ì Double-break, direct-opening Ì Contact block integral to switch Ì CE10 and CE41 Series are CSA and IMQ Approved and UL Recognised snap action contacts conform to housing 543880 IEC 60947.5.1.3 Ì Hinge cover for easy wiring access Price Each Ì EN500047 mounting Ì 50mm rubber rollers ideal for ele- Mftrs. List No. Order Code 1+ 5+ 10+ Ì 20mm and 0.5 in NPT conduit vator applications options Ì Sealing IP65, NEMA 1, 12, 13 CE10 Series IP66 - 30mm Width, PG 13.5 Cable Gland Ì Galvanically isolated contacts Ì cUL-US, CE, CCC Plunger CE10.00.AM 175-6376● Ì Double insulated plastic housing Roller Plunger CE10.00.BM 175-6377● Circuitry 1NO 1NC direct opening snap action; Roller Lever CE10.00.EM 175-6378● 1NO 1NC direct opening slow action break-before-make (BBM) ● Adjustable Roller Lever CE10.00.FM 175-6379 Ampere Rating 10A (Thermal) Adjustable Rod Lever CE10.00.HM 175-6380● Supply Voltage 300VAC and 250VDC Max. Housing Material Plastic CE41 Series IP66 - 40mm Width, PG 13.5 Cable Gland Terminal Type 12.7mm conduit; 20mm conduit Plain Plunger CE41.00.AM 175-6381● Housing Type EN 50047 Roller Plunger CE41.00.BM 175-6383● Shock 50g per PEC 68-2-27c (w/o actuator) Vibration 10g per IEC 68-2-6 (w/o actuator) Roller Lever CE41.00.EM 175-6384● Sealing IP65, NEMA 1, 12, 13 ● Adjustable Roller Lever CE41.00.FM/50 175-6385 Approvals cUL-US, CE, CCC Adjustable Rod Lever CE41.00.HM 175-6386● Mechanical Life 5 Million Operations Operating Temperature -10 to 80°C CE70 Series IP67 - 40mm Width, Pre-wired, 1m PVC Cable 419554 Roller Lever CE70.00.EM 175-6387● Actuator Mftrs. Price Each ● Adjustable Roller Lever CE70.00.FM 175-6388 Type List No. Order Code 1+ 5+ 10+ 1/2 NPT Conduit Limit Switches - Guardmaster Top Plunger GLLC01B 108-2239 Top Roller GLLC01C 108-2240 Miniature Limit Switch Side Rotary - 17mm Metal Roller GLLC01A1B 108-2241 IMP Series Side Rotary - 17mm Adj. Metal Roller GLLC01A2B 108-2242 Ì Positive acting forced disconnection contacts Side Rotary - 50mm Rubber Roller GLLC0A1Y 108-2244 Ì Glass reinforced plastic housing to IP30 Side Rotary - 50mm Adj. Rubber Roller GLLC0A2Y 108-2245 Ì Small size for use in confined spaces FREE GLOBAL LEGISLATION SUPPORT RoHS, REACH, WEEE, ErP, Batteries Directive - latest updates, free white H = 37, W = 24.5, D = 23mm papers and live online Q&A at 624568 element14.com/legislation Switch Price Each Contacts Action Mftrs. List No. Order Code 1+ 10+ 25+ Top Push Roller 1NC, 1NO Slow break before make 440P-M18001 519-200

2870

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1 Farnell P 2871Date: 06-09-12 time:21:27

farnell.com element14.com 2871

Metal Snap Action Miniature - Type 14CE Sub-Miniature Limit Switch, SZL-VL Series 5A @ 250V ac or 30V dc Operating position=15.7 (178-490), 28.5 (178-491, 178- 492)

Body H=44.3 (excl plunger), W=40, D=16, Fixing centres=25 178-490 178-491 178-492 918-209 918-167 Ì SPDT snap action switching Ì Pre-wired with 1 metre cable H = 78 W = 28 D = 30.3 Ì Strong diecast aluminium housing, protection to IP65 These economical sub-miniature Limit Switches are especially designed for applications Ì Sealed version prevents contaminents from impeding with restricted mounting space. A special flexible cable gland allows for fast and simple 918-179 plunger movement. wiring. The removable front plate leaves the base fixed for ease of wiring. Ì Side rotaty version has auxiliary actuators available for Ì Single pole - double throw, double break EN60947-5-1) 918-210 versatility. Ì Flexible cable gland Ì 5 Amp switching capacity 918-180 918-192 Ì IP64 enclosure rating Ì Temperature range - 20 to 60 degrees C Electrical life 60000 ops Operating temperature 0°C to +70°C Ì Zinc die-cast base and plastic front cover Ì 56mm x 21mm between centres, Base Mechanical life 5000000 ops Ì C-UL &CE approved, (UL508 & plate fixing holes 210249 Switching Voltage 250V, 125V Contacts 1NO + 1NC Mfttrs. Price Each Rated Current 5A 248247 List No. Order Code 1+ 5+ 10+ Mftrs. Price Each Switches Actuator List No. Order Code 1+ 5+ 10+ 14CE1-1 178-490 Side Roller Lever SZL-VL-A 424-5507● 14CE2-1 178-491 Side Adjustable Roller Lever SZL-VL-B 424-5519● 14CE3-1 178-492 Side Rotary Adjustable Rod SZL-VL-C 424-5520● 14CE18-1 918-209 Pin Plunger SZL-VL-D 424-5532● 14CE31-1 918-210 Wobble Coil Spring Lever SZL-VL-G 424-5544● Automation 14CE16-1 918-167 Roller Plunger SZL-VL-H 424-5556● Accessories 6PA78-4 918-179 6PA44-4 918-180 Safety Type, Miniature - Type GLS 6PA43-4 918-192 DIN Standard 10A Thermal (Ith) (IEC947-5-1) / Low Energy 100mA @ 50V

Super Sealed Limit Switches Ì Switches pre-wired with 3m of PUR cable Ì Suitable for submersion and arduous conditions Ì Oil and weather resistant Ì IP68 sealing 37 Ì Corrosive resistant Ì Wide temperature range: -40°C to +85°C Ì Contact arrangement: 1 N/O and 1 N/C SPDT Machine Safety & Limit Switches Ì Standard: EN 60947-5-1 L = 65, W = 16, D = 40 Body: H (to fixing centres) =55, W =30.5, D =30. Fixing centres = 20-22 (2 4.3ø) This range of Honeywell switches have been developed to operate in the most arduous ap- Ì High quality miniature Global Limit Switches conforming to EN50047 plication conditions. Ì Birfurcated silver snap-action contacts suitable for high energy switching 233129 Ì Low energy gold contact version - ideal for PLC interface 1μA to 100mA switching Price Each Ì Two circuits (1NO+1NC) with positive opening on the NC contacts suitable for safety Mftrs. List No. Order Code 1+ 5+ applications according to IEC947-5-1-3 Top Pin SSCEB31B 383-3744 Ì Actuator heads are adjustable in 90° increments through 360° Side Rotary SSCEB31A1B 383-3770 Ì Choice of housings:- Top Roller SSCEB31C 383-3756 All metal (zinc diecast) Double insulated thermoplastic (glass filled polyester) with metal actuators Cross Roller SSCEB31D 383-3768 Ì ULRecognised and CSA approved Ì Sealed to IP66 Metal Positive Break Miniature - Type 24CE Contact rating 10A standard/100mA (max) Low energy 5A @ 250V ac or 30V dc Mechanical life Up to 15 million operations Operating temperature -25°C to + 85°C Ì Positive break safety type conduit entry PG13.5 Ì Two circuit double break switches with break-before make contacts Electrical according to EN50047, EN60947-5-1, IEC947-5-1-3 Ì Strong diecast aluminium housing, protected to IP66 Note: Coiled spring actuator is not suitable for safety applications Ì Pre-wired with 2 metres 5-core cable 210252 Electrical life 150000 ops Operating temperature 0°C to + 70°C Price Each Mechanical life 5000000 ops Actuation Type Mftrs. List No. Order Code 1+ 5+ 10+ 20+ Body H 49.3mm without plunger Body W 40mm Metal Body - Standard Fixing Centres 16mm Roller lever GLCB-01A1B 674-485 Operating position 28.5mm Adj. roller lever GLCB-01A2B 674-497 Body H=49.3 (excl. plunger), W=40, D=16 Fixing centres=25, Operating position=28.5 210250 Adj. rod lever GLCB-01A4J 674-503 Mftrs. Price Each lever GLCB-01A5B 674-515 List No. Order Code 1+ 5+ 10+ Pin plunger GLCB-01B 674-527 In-line roller plunger 24CE2-S2 178-493 Roller plunger GLCB-01C 674-539 Roller arm GLCB-01D 674-540 Coil spring GLCB-01E7B 674-552 Metal Body - Low Energy Roller lever GLCB-07AB 986-525 Adj. roller lever GLCB-07A2B 986-537 Roller plunger GLCB-07C 986-550 Double Insulated Body (Thermoplastic) - Standard Roller lever GLDB-01A1B 560-376 Adj. roller lever GLDB-01A2B 560-388 The first online technical portal for design engineers Adj. rod lever GLDB-01A4J 674-461 lever GLDB-01A5B 674-473 Log on, research, refine and design Pin plunger GLDB-01B 560-390

2871

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1 Farnell P 2872Date: 06-09-12 time:21:27

2872 farnell.com element14.com

Limit Switches - Honeywell - continued Safety Type, Low Energy Switching - Type GSS DIN Standard 10A Thermal (IEC 947-5-1) Safety Type, Miniature - Type GLS - continued Ì Snap action with positive break for extended life DIN Standard 10A Thermal (Ith) (IEC947-5-1) / Low Energy 100mA @ 50V - continued Ì Slow action contacts, Make Before Break have no hysteresis Price Each Ì 20mm conduit entry thread Ì Conforms to EN50041, IEC947-5-1, EN60947-5 Actuation Type Mftrs. List No. Order Code 1+ 5+ 10+ 20+ Ì Sealed to IP67 Double Insulated Body (Thermoplastic) - Standard Ì UL Recognised and CSA Approved Roller plunger GLDB-01C 560-406 Roller arm GLDB-01D 560-418 Coil spring GLDB-01E7B 560-420 Roller Lever Roller Plunger 624774 Metal Body - Two Circuit (SPDT) - Standard Price Each Roller Lever GLEB-01A1B 674-564 Actuation Type Mftrs. List No. Order Code 1+ 5+ 10+ 20+ Adjustable Roller Lever GLEB-01A2B 674-576 Adjustable Rod Lever GLEB-01A4J 674-588 Two Circuit (1NC+1NO) Offset Roller Lever GLEB-01A5B 674-590 Roller Lever GSAC01AB 986-689 Pin Plunger GLEB-01B 674-606 Roller Plunger GSAC01C 986-707 Roller Plunger GLEB-01C 674-618 Four Circuit (2NC+2NO) Roller Arm GLEB-01D 674-620 Roller Lever GSAC20A1B 986-768 Coil Spring GLEB-01E7B 674-631 Roller Plunger GSAC20C 986-770 Metal Body - Two Circuit (SPDT) - Low Energy Four Circuit (3NC+1NO) Adjustable Roller Lever GLEB-07A2B 986-653 Roller Lever GSAC46A1B 566-202 Metal Body - Four Circuit (DPDT) - Standard Roller Lever GLEB-24A1B 674-643 High Temperature - Type LS Adjustable Roller Lever GLEB-24A2B 674-655 10A @ 480Vac Roller Plunger GLEB-24C 674-667 Ì 2 circuit double break snap action switch Ì 20mm Conduit entry Automation Safety Type, Standard - Type GLS Ì Rugged construction, sealed to IP67 Ì Oil, dust and water resistant DIN Standard 10A Thermal (Ith) (IEC947-5-1) / Low Energy 100mA @ 50V Ì Operating temperature range -10 to +150°C Ì Conforms to IEC947-1 and EN 60947-5-1 H (to fixing centre) = 63.5 NB: Centre image discontinued 210265 Price Each Mftrs. List No. Order Code 1+ 5+ 10+ + Roller Lever 1LS244-4C 566-251 37 Roller Plunger 5LS1-4CN152 566-275 Roller Large Roller Adjustable Adjustable Pin Roller Roller Coil Lever Lever Roller Lever Rod Lever Plunger Plunger Arm Spring Body: H (to fixing centres) = 75.8, W = 42, D = 41.6mm. Fixing centres = 60 x 30mm GXS Explosion Proof Switches Machine Safety & Limit Switches Ì High quality miniature Global Limit Switches in all-metal housing conforming to This range of Explosion proof switches have been de- EN50047 signed specifically for use in Hazardous area applica- Ì Birfurcated silver snap-action contacts suitable for high energy switching tions and comply to ATEX DIRECTIVE. Ì Low energy gold contact version - ideal for PLC interface 1μA to 100mA switching Ì II2GEExdIIC T6 Ì Two circuits (1NO+1NC) and 4 circuit (2NO+2NC) types available Ì KEMA 00 ATEX 2103X Ì Positive opening on NC contacts suitable for safety applications according to IEC947- Ì Conforms to EN50014, EN50018 5-1-3 Ì CE marked Ì Actuator heads are adjustable in 90° increments through 360° Ì EN50047 mounting compatible Ì Sealed to IP67/NEMA4 Ì Rugged Zinc die-cast housing Ì UL Recognised and CSA Approved Ì Fully potted enclosure: IP67/68 Note: Coiled spring actuator is not suitable for safety applications Ì Pre-wired - 5 metres of cable 624701 Ì Double insulated switch element Price Each L = 115, W = 30, D = 60 Ì Snap-action basic switch Actuation Type Mftrs. List No. Order Code 1+ 5+ 10+ 20+ Mechanical Life Up to 2 million operations Two Circuit (SPDT) - Standard Operating Temperature -20°C to 75°C Rating AC15, 4A 250V, DC13, 0.15A 250V Roller Lever GLAC-01A1B 560-327 1 NC/1NO change over contacts Roller Lever GLAC-01A2W 184-925 Cable H05VV-F, 3 x 0.75 Adjustable Roller Lever GLAC-01A2B 674-679 Vibration 10g conforming to IEC 68-2-6 Shock 50g conforming to IEC 68-2-27 Adjustable Rod Lever GLAC-01A4J 674-680 233127 Pin Plunger GLAC-01B 560-339 Mftrs. Price Each Roller Plunger GLAC-01C 560-340 List No. Order Code 1+ 5+ Roller Arm GLAC-01D 560-352 Side Rotary Actuator GXE51A1B 381-2420 Coil Spring GLAC-01E7B 560-364 Top Roller GXE51C 381-2443 Two Circuit (SPDT) - Low Energy Adjustable Roller Lever GLAC-07A2B 986-616 Limit Switches - IMO Four Circuit (DPDT) - Standard Roller Lever GLAC-20A1B 674-692 Compact Limit Switches Adjustable Roller Lever GLAC-20A2B 674-709 Roller Plunger GLAC-20C 674-710 Ì Plastic housing Ì Turret head rotatable in 90°steps Ì Removable contact block for ease of wiring Safety Type, Plug-In - Type GLS Ì IP65 protection Ì Fast installation and replacement Ì UL Recognised and CSA approved Ì Removable front body panel Ì Double break contacts with electrically separate Ì Metal body N/O and N/C contacts Ì 20mm Conduit entry Body: H (to fixing centres)=52mm, W=30.8mm, D=30.8mm, Fixing centres 22mm Ì Electrical specifications to EN60947-5-1, EN50041, Rated Current 10A Operating temp: -25°C to +80°C IEC947-5-1 A600, AC15, Q300, DC13 Contact Rating 6@230Vac Contacts FR5xx 1NO / 1NC Ì UL Recognised and CSA Approved 4A@400Vac FR20xx 1NO / 1NC 624709 1A@500Vac Mechanical Life 20000000ops Price Each 210282 Actuation Type Mftrs. List No. Order Code 1+ 5+ 10+ 25+ Actuator/ Mftrs. Price Each Side Rotary Roller Standard GLBC02A1B 918-027 Application Contact Block List No. Order Code 1+ 5+ 10+ Side Rotary Roller Adjustable GLBC02A2B 918-039 General/Safety Piston Plunger FR501 993-9121● Side Rotary Rod Adjustable GLBC02A4J 918-040 General/Safety Roller Lever FR531 993-9172●

2872

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1 Farnell P 2873Date: 06-09-12 time:21:27

farnell.com element14.com 2873

Standard Limit Switches Safety Action - Type D4B...N 10A @ 240V ac or 500V ac Ì Metal Housing Roller Plunger Ì Metal body conforming to EN50041 Ì Turret head rotatable in 90° steps Lever Ì 1NO + 1NC Snap action contacts Ì Removable contact block for ease of wiring Ì Suitable for safety applications to Ì IP65 protection EN60947-5-1 Ì UL Recognised and CSA approved Ì Protected to IP67 Ì Double break contacts with electrically separate Ì CSA, TUV and VDE Approved, UL N/O & N/C contacts Recognised Body: H(to fixing centres) = 60mm, W = 40mm, D = 38mm, Fixing centres= 30mm Adjustable Large Rubber Roller Body - H = 101, W = 40, D = 43mm Rated Current 10A FD5xx 1NC / 1NO Roller Lever Roller Lever Plunger 624789 Contact Rating 6@230Vac FD20xx 1NC / 1NO Mftrs. Order Price Each 4A@400Vac Operating Temperature -25°C to +80°C Actuation Type List No. Code 1+ 5+ 10+ 1A@500Vac 231215 Roller Lever D4B-1111N 170-569 Actuator Mftrs. Price Each Adjustable Roller Lever D4B-1116N 170-572 Type List No. Order Code 1+ 5+ 10+ Large Rubber Roller Lever D4B-1114N 170-937 Roller Plunger FD515 993-9067● Plunger D4B-1170N 170-570 Adjustable Roller Lever FD535 993-9105● Roller Plunger D4B-1171N 170-571

Limit Switches - Omron Metal - Type ’ZC’ 10A @ 240V ac Safety Action, Miniature - Type ’D4N’ Ì Safety action - fail-safe mechanism forcibly opens contacts should return spring fracture or contacts weld Ì Lever actuating heads can be mounted in four separate directions Ì Conform to VDE 0660 and VDE 0113 safety switch specifications, also to IEC-337-1, IEC-204-1 and EN Automation Body: H=37 (excl. plunger), W=21.4, D=60, Fixing centres=25.4 50047 Ì Heat and impact resistant plastic resin body, sealed General purpose sealed actuator switch series with metal enclosure and snap on cover for to IP65 screw terminals. 112-5854 112-5855 112-5853 Contacts SPDT Electrical life 750000ops. Roller One way Piston Body: H=60 (excluding plunger), W=31, D=31, Fixing centres=47x22 Mechanical Life 10000000 Operating Temperature -10°C to +80°C plunger roller plunger 210266 Contacts SPNO Electrical life 500000ops at 6A @ 380V ac Actuator Mftrs. Price Each Mechanical life 15000000ops Operating temperature -30°C to 70°C 424754 Type List No. Order Code 1+ 5+ 10+ Mftrs. Price Each Pin Plunger ZC-Q55 103-487 Actuator List No. Order Code 1+ 5+ 10+ Cross Roller ZC-Q2155 103-488 Roller Lever D4N-1120 112-5852● In-Line Roller ZC-Q2255 103-489 37 Top Plunger D4N-1131 112-5853● Top Roller Plunger D4N-1132 112-5854● Metal - Type ’ZE’ Machine Safety & Limit Switches Roller Arm Lever D4N-1162 112-5855● 15A @ 240V ac Sealed plunger Sealed roller arm lever Ì Fully enclosed screw terminals and General Purpose - Type ’WL’ conduit entry 10A @ 240V ac or 480V ac Ì Protection to IP65 (103-490, 103- 491) and IP50 (103-492, 103-493) 103-474 103-469 103-470 Adjus- 103-471 Coil spring Roller lever table roller lever Adjustable rod lever Contacts SPDT 103-472 103-473 Roller Mechanical Life 10000000 ops Plunger plunger Electrical life 700000 ops Operating Temperature -5°C to +80°C

Body: H=44.5 (excl. plunger), W=86, D=25.4, Fixing centres=25.4mm Plunger Roller plunger 210267 Body: H=94.1, W=39.9, D=40.0, Fixing centres = 58.7 30.2U Actuator Mftrs. Price Each Ì Dual circuit snap-action limit switches Ì Actuator can be adjusted through 360° Type List No. Order Code 1+ 5+ 10+ Ì Actuator heads are adjustable in 90° in- about rotary shaft on lever types Sealed Plunger ZE-N2G 103-490 crements through 360° Ì Metal enclosure, protection to IP67 Sealed Roller Arm Lever Lever ZE-NA22G 103-491 Contacts SPNO Electrical life 800000 ops Plunger ZE-Q2G 103-492 Mechanical Life 15000000 ops Operating Temperature -5°C to +80°C Roller Plunger ZE-Q22 2G 103-493 103-895 : Replacement coil spring actuator for 103-474 210263 Mftrs. Order Price Each List No. Code 1+ 5+ 10+ Roller Lever WLCA2G 103-469 Adjustable Roller Lever WLCA12G 103-470 Rod Lever WLCLG 103-471 Plunger WLDG 103-472 Roller Plunger WLD2G 103-473 Coil Spring WLNJG 103-474 Replacement coil spring actuator WL-9H100 103-895 FREE GLOBAL LEGISLATION SUPPORT TROUBLESHOOTING TIPS RoHS, REACH, WEEE, ErP, Batteries Directive - latest updates, free white Chat online to one of our papers and live online Q&A at technical engineers at farnell.com element14.com/legislation

2873

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1 Farnell P 2874Date: 06-09-12 time:21:27

2874 farnell.com element14.com

Limit Switches - Schmersal Limit Switches - Telemecanique Safety Limit Switches - EN 50047 XCKJ Complete Assemblies 236 Thermoplastic - IP67 Ì Fixed or plug in metal body Ì Conforming to CENELEC EN50041 Ì Snap/Slow action positive break contacts Ì IP66 conforming to IEC60529 Ì Head can be rotated by 90 steps Plunger Roller plunger Adjustable Angle roller Ì Heavy duty (up to 1 million operations) Ì UL recognised, CSA certified Body - H = 58.5, W = 30, D = 30mm Roller Lever lever Contacts Snap action/ Slow break Contacts Snap action/ Slow break Ì Thermoplastic enclosure Ì Actuator heads can be repositioned in steps 4 conforming to IEC conforming to IEC Ì Double insulated x 90° 947-5-1 section 3 947-5-1 section 3 Standards EN50041 Approvals UL & CSA Ì 1NO + 1NC contacts Ì Angle of roller lever adjustable in 10 °steps with CE marking Ì Snap action with constant contact Ì Good resistance to oil and petroleum spirit Dimensions 42.5x84x36 Body & Heads In ZAMAC pressure to switching point Ì Conforms to IEC/EN 60947-5-1 and EN 1088; Degree of Protection Min. IP66 Dimensions (WxHxD) 42.5x84x36mm Ì Wiring compartment BG-GS-ET-15 Cable Entry ISO M20 Ì Wide range of alternative actuators Ì CCC Approved and UL Recognised 383604 624802 Price Each Price Each Actuator Mftrs. List No. Order Code 1+ 5+ 10+ Actuation Type Mftrs.List No. Order Code 1+ Adjustable Roller Lever XCKJ10541H29 872-9913 Slow action contacts Adjustable Rod Lever XCKJ110559H29 872-9921 Plunger S TS236-11Z-M20 189-0471● Plunger XCKJ161H29 872-9930 Roller Plunger R TR236-11Z-M20 189-0473● Roller Lever/Plastic XCKJ10511H29 872-9948 Roller Lever 7H TV7H236-11Z-M20 189-0482● Roller Plunger XCKJ167H29 872-9956 Roller Lever K4 TK4 236-11Z-M20 189-0481● Automation Snap action contacts ZCKE Heads & Actuators Plunger S ZS236-11Z-M20 189-0474● Roller Plunger R ZR236-11Z-M20 189-0472● Roller Lever 7H ZV7H236-11Z-M20 189-0476● Roller Lever 12H ZV12H236-11Z-M20 189-0477● Roller Lever K4 ZK4 236-11Z-M20 189-0469●

Safety Limit Switches - EN 50041 336 Thermoplastic - IP67 383605 Ì Thermoplastic enclosure Mftrs. Price Each 37 Ì Double insulated Description List No. Order Code 1+ 5+ 10+ Ì 1NO + 1NC Contacts Steel Lever Plunger ZCKE23 872-9972 Ì Snap action with constant contact pressure to switching point Spring Rod ZCKE08 873-0008 Machine Safety & Limit Switches Ì Wiring compartment Side Metal Plunger ZCKE63 873-0024 Ì Wide range of alternative actuators Side Vertical Steel Roller Plunger ZCKE65 873-0040 Ì Actuator heads can be repositioned in steps 4 x 90° Ì Angle of roller lever adjustable in 10 °steps Steel Reinforced Roller Plunger ZCKE67 873-0067 Ì Good resistance to oil and petroleum spirit H = 36, W = 40.5, D = 38mm Fixing centres = 30mm Safety Limit Switches - IP67 Roller lever Adj. Roller Lever 241983 Preventa XCSM Actuator Price Each Ì Compact IP67 body design Type Mftrs.List No. Order Code 1+ Ì Tamperproof metal construction Ì Pre-cabled in 2m or 5m length Slow action contacts Ì Plunger or roller plunger heads Roller Lever H T4VH336-11Z-M20 189-0480● Ì 2NC + 1NO snap action contacts Snap action contacts Contact rating 1.5A@240Vac 6 Plunger S ZS336-11Z-M20 189-0479● Mechanical operations > 10 Operating temperature -25°C to +70°C Roller Plunger R ZR336-11Z 189-0478● Contact configuration 2NC / 1NO Roller Lever H Z4VH336-11Z-M20 189-0470● H = 60, W = 16, D = 30mm Adj.roller lever 50mm 246460 Adjustable Roller Lever Z4V7H336-11Z-1058-M20. 418-6928 Mftrs. Price Each List No. Order Code 1+ 5+ 10+ Pull-wire Switch Snap action contacts ZQ 700 Series Roller plunger 2m cable XCSM3902L2 427-6036 Ì Thermoplastic enclosure Roller plunger 5m cable XCSM3902L5 427-6048 Ì One-side operation/wire up to 10 m long Ì Release push button Miniature Compact Limit Switches - IP66 Ì Position indicator Ì Large wiring compartment Osiswitch Ì Twisting of towing eye not possible Ì 1NO + 1NC Snap action contacts Ì Wire pull and breakage detection Ì Up to 40% saving on installation time Ì One tension force for cable lengths up to 10 m Ì Quick disconnect cable Ì BG and TUV Approved, UL Recognised Ì Robust metal housing Body - H = 160, W = 40.5, D = 40.5mm Ì Head can be rotated in 15° steps 630617 Ì CE and CSA Approvals, UL Recognised Switching Mftrs. Price Each Capacity Contacts List No. Order Code 1+ Body - H = 59, W = 30, D = 30mm 4A @ 230V ac / 4A @ 24V dc 1NO / 1NC ZQ700-11 189-0467● Roller Adjustable 4A @ 230V ac / 4A @ 24V dc 2NC ZQ700-02 189-0468● Plunger Roller Lever 624812 Mftrs. Price Each Actuation Type List No. Order Code 1+ 5+ 10+ Roller Plunger XCMD2102L1 425-4570 Adjustable Roller Lever XCMD2145L1 425-4582

2874

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1 Farnell P 2875Date: 06-09-12 time:21:28

farnell.com element14.com 2875

Universal Compact Limit Switches - IP67 Mftrs. Price Each Osiswitch Model List No. Order Code 1+ 2+ + Ì 1NO + 1NC Snap action contacts Relays Ì Up to 40% saving on installation time RT6 24DC 3NO/1NC 2TLJ010026R0000 209-7626● Ì Removable contact blocks RT6 24 AC 3NO/1NC 2TLJ010026R0200 209-7627● Ì Dual cable entry RT6 115 AC 3NO/1NC 2TLJ010026R0400 209-7628● Ì Head can be rotated in 15° steps RT6 230 AC 3NO/1NC 2TLJ010026R0500 209-7629● Ì CE and CSA Approvals, UL Recognised RT7 24V DC4NO/1NC/3S 2TLJ010028R1000 209-7630● RT7 115AC 4NO/1NC/3S 2TLJ010028R1400 209-7632● ● H = 73, W = 30, D = 30mm TR7 230AC 4NO/1NC/3S 2TLJ010028R1500 209-7633 RT7 24DC 4NO/1NC/1.5S 2TLJ010028R2000 209-7634● 624807 RT7 115AC 4NO/1NC/1.5S 2TLJ010028R2400 209-7635● Mftrs. Price Each RT7 230AC 4NO/1NC/1.5S 2TLJ010028R2500 209-7636● ● Actuation Type List No. Order Code 1+ 5+ 10+ RT9 24V DC 4DC, 2NO 2TLJ010029R0000 209-7637 Relay Expansion Metal Body E1T, 0S, 24DC 2TLJ010030R0000 209-7638● Adjustable Roller Lever XCKD2145P16 425-3802 Safety 2 Hand Plastic Body JSBR4, 24DC 2TLJ010002R0000 209-7639● Adjustable Roller Lever XCKP2145P16 425-3747 Failsafe Relay Heavy Duty Limit Switch - IP66 Series BT50 Ì Robust Heavy Duty Switch Failsafe Relays are designed to connect safety Ì 11 operating sequences available devices, such as emergency stops, directly in the Ì Heavy duty lever arms available voltage supply circuit to the relay. Despite a maxi- Ì IP66 Ingress protection mum built in width of 22.5 mm the relay is very Ì Oil tight, dust tight, water tight and powerful. With 3NO safety outputs, 1NC output (for monitoring purpos- drip tight enclosure es), a test input and complete internal supervision, the BT50 is quite Contacts Single throw double pole unique. In addition, delayed outputs (BT50T) can be ordered.

Max. contact voltage 600V @ 5A, 120V @ 20A Automation Voltage Voltage Current Mftrs. H=38, W=59, D=62 246163 Model Max DC Max AC Max (A) List No. Order Code BT50 24 250 6 2TLJ010033R0000 209-7646 Price Each

Mftrs. List No. Order Code 1+ 5+ 10+ 658449 Limit Switch Mftrs. Price Each Universal Tub Limit Switch 9007TUB4M11 423-2884 Model List No. Order Code 1+ 2+ 5+ ● Lever Arms BT50 2TLJ010033R0000 209-7646 19mm Roller 64mm Arm 9007B7 423-2896 PLC’s ABB-Jokab Safety Series Pluto 37 The Pluto program- Safety Relays mable logic controller Series RT (PLC) is a digital Machine Safety & Limit Switches Use the RT universal relay to man- Identifier computer used for age both your safety devices and automation of electromechanical process- the internal safety of your machines, such as control of machinery on factory assembly lines, amuse- ery. In addition you can select the ment rides, or light fixtures. Unlike general-purpose computers, the safety level required for each installation, this is possible PLC is designed for multiple inputs and output arrangements, extended because the RT series has the most versatile input op- temperature ranges, immunity to electrical noise, and resistance to vi- tion arrangement available on the market. Many other re- bration and impact. lays can therefore be replaced by the RT series relays. PLC The relay also comes with other options such as manual Contact IP / NEMA Mftrs. or automatic reset. The RTseries relays also support Model Config Rating List No. Order Code output monitoring. These output monitoring will for ex- PLC’s Safety Relay Relay Expansion ample indicate if a gate is open or closed and if the safe- S20 8+8+2+2, NO BUS IP20, IP40 2TLA020070R0500 209-7640 ty relay needs to be reset. B20 8+8+2+2, W. BUS IP20, IP40 2TLA020070R0600 209-7641 RT6-7 Series: B46 24+16+4+2, BUS IP20, IP40 2TLA020070R1700 209-7642 Ì Mounting DIN Rail Ì Contact Current 6A Maximum Accessories Identifier Jokab Series 2TLA020070R2000 209-7644 Ì Contact Volts Nom 250VAC and 24VDC Ì Height 84mm Depth 120mm Width 45mm USB Cable Jokab Series 2TLA020070R5800 209-7645 (RT9 22.5mm) 658435 Contact Number of Mftrs. Mftrs. Price Each Model Config Poles List No. Order Code Relays PLC’s List No. Order Code 1+ 2+ + RT6 24DC 3NO/1NC 3PST-NO / SPST-NC 4 2TLJ010026R0000 209-7626 S20 2TLA020070R0500 209-7640● RT6 24 AC 3NO/1NC 3PST-NO / SPST-NC 4 2TLJ010026R0200 209-7627 B20 2TLA020070R0600 209-7641● RT6 115 AC 3NO/1NC 3PST-NO / SPST-NC 4 2TLJ010026R0400 209-7628 ● RT6 230 AC 3NO/1NC 3PST-NO / SPST-NC 4 2TLJ010026R0500 209-7629 B46 2TLA020070R1700 209-7642 RT7 24V DC 4NO/1NC/3S 4PST-NO / SPST-NC 5 2TLJ010028R1000 209-7630 Accessories For use with RT7 115AC 4NO/1NC/3S 4PST-NO / SPST-NC 5 2TLJ010028R1400 209-7632 Identifier 2TLA020070R2000 209-7644● TR7 230AC 4NO/1NC/3S 4PST-NO / SPST-NC 5 2TLJ010028R1500 209-7633 USB Cable 2TLA020070R5800 209-7645● RT7 24DC 4NO/1NC/1.5S 4PST-NO / SPST-NC 5 2TLJ010028R2000 209-7634 RT7 115AC 4NO/1NC/1.5S 4PST-NO / SPST-NC 5 2TLJ010028R2400 209-7635 RT7 230AC 4NO/1NC/1.5S 4PST-NO / SPST-NC 5 2TLJ010028R2500 209-7636 RT9 24V DC 4DC, 2NO DPST-NO 2 2TLJ010029R0000 209-7637 Relay Expansion INTELLIGENT ONLINE BUYING E1T, 0S, 24DC 4PST-NO 4 2TLJ010030R0000 209-7638 SYSTEM PROVIDING Safety 2 Hand JSBR4, 24DC 3PST-NO / SPST-NC 4 2TLJ010002R0000 209-7639 Complete cost control, reduced 658409 administration time, visibility of your spend, flexibility and personalised to IMPROVED BACK ORDER DELIVERY your company’s needs. farnell.com/ibuy Receive email updates with the exact status, due date and despatch information of all your back order items farnell.com

2875

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1 Farnell P 2876Date: 06-09-12 time:21:28

2876 farnell.com element14.com

ABB-Jokab Safety - continued E-Stop Push Button Switches Safety Switches

These safety switches have three contacts which give both the two contacts needed for high safety level as well as a Safety Switch Magnetic switch contact for indicating operating status. The advanced design offers the choice of four The size of the E-stop device makes it possible to be installed wherever needed. With M12 operating positions from only two actuator entries by simply rotating the head through connections or cable and centralised mounting holes. the E-stop is very easy to install, es- 180° pecially on aluminium extrusions. There are different versions available, either with one or Contact Voltage Current Mftrs. two M12 connections or cable. Two M12 connectors are used to enable the connection of Config Max (V AC) Max (A) List No. Order Code E-stops in series. On the top of the E-stop unit, an LED indicates the status. Switches Ì E-STOP, 10EA, WITH LED INDICATOR Ì Actuator Styl: Pushbutton JSNY5A 2NC+1NO, 10N 240 5 2TLJ020022R0000 209-7647 Ì Contact Configuration: DPST-NC Ì Switch Terminals: Screw JSNY5B DPST-NC / SPST-NO 240 5 2TLJ020022R0100 209-7648 Ì Contact Voltage DC: Nom: 24V Ì Actuator Diameter: 32mm JSNY7R-3 3M Cable 250 10 2TLJ020023R0000 209-7649 Ì Contact Voltage AC: Nom: 10V Ì IP Rating: 65 JSNY7R-6 6M Cable 250 10 2TLJ020023R0100 209-7650 Key Max Current AC Max Current AC Ì Contact Current Max: 2A 659191 JSNY7R-6 100 100 2TLJ020024R0000 209-7651 658457 Mftrs. Price Each Mftrs. Price Each List No. Length Width Height Order Code 1+ 2+ 5+ ● Switches List No. Order Code 1+ 2+ 5+ 2TLA030051R0400 84 40 52 209-7661 ● JSNY5A 2TLJ020022R0000 209-7647● 2TLA030054R0100 80 16.7 29.5 209-7662 JSNY5B 2TLJ020022R0100 209-7648● SNY7R-3 2TLJ020023R0000 209-7649● 2 Hand Control Station JSNY7R-6 2TLJ020023R0100 209-7650● Key Ì Safeball: Polypropen

Automation JSNY7R-6 2TLJ020024R0000 209-7651● Ì Housing: painted steel Ì Gaskets: rubber Safety Interlock Switch Ì Caseing: Aluminium

The JSNY9 series of safety interlock switches with locking function. The switch can only be actuated Body Number of Contact Contact Mftrs. using a corresponding triple coded actuator and Material Positions Config Resistance (Meg) List No. Order Code can be mounted in any direction (the switch head Aluminium 2 2NO / 2NC 100 2TLA020007R6000 209-7660 Accessories can be rotated 4x90 degrees). The actuation direction can be either lin- Cable Current Voltage ear or radial by using a specific actuator. The switch head can also be Description Length (M) Rating (A) Rating (V) flipped upwards which allows both horizontal and vertical actuation di- Cable 2 2 30 2TLA020007R3000 209-7659 37 rections. The holding force is 1500 N. 659144 The JSNY9 is tamper-proof and cannot be actuated with screwdrivers, Driver Mftrs. Price Each magnets or by other means. Height Width Depth List No. Order Code 1+ 2+ + Machine Safety & Limit Switches The switch is well suited to lock doors or hatches to prevent access. The connection method is via cable. 129 356 91 2TLA020007R6000 209-7660● Contact Contact Voltage Contact Current Mftrs. Accessories Model No Config Max (V AC) Max (AC) List No. Order Code Cable 2TLA020007R3000 209-7659● JSNY9S SPST-NO / SPST-NC 230 4 2TLJ020036R4400 209-7652 JSNY9M SPST-NO / SPST-NC 230 4 2TLJ020036R4500 209-7653 Accessories Cables For JSTD1-A JSHD4 Enabling Device 3 Position 2TLJ020002R0000 209-7654 658481 These are 5 and 10 metre cables for use with the Mftrs. Price Each JSTD1-A. List No. Model No Order Code 1+ 2+ + NOTE: Control knob not included. 2TLJ020036R4400 JSNY9S 209-7652● 2TLJ020036R4500 JSNY9M 209-7653● Enabling Device 2TLJ020002R0000 JSHD4 209-7654●

658485 Mftrs. Price Each Description List No. Order Code 1+ 2+ 5+ Cable 5 Mtr 2TLJ020003R0000 209-7656● Cable 10 Mtr 2TLJ020003R0100 209-7657● Accessories 12-POLE connector for JSHD4 2TLA020003R0300 209-7658●

FREE GLOBAL LEGISLATION SUPPORT RoHS, REACH, WEEE, ErP, Batteries Directive - latest updates, free white papers and live online Q&A at element14.com/legislation

The first online technical portal for design engineers Log on, research, refine and design

2876

C = CYAN M = Magenta Y = Yellow B = Black/UKBK1