International Crystal Laboratories Supplies and Accessories for Spectroscopy

INTERNATIONAL CRYSTAL LABORATORIES SUPPLIES AND ACCESSORIES FOR SPECTROSCOPY

. . . the SOURCE for all IR, FTIR, XRF, UV/VIS/NIR Fluorescence & Raman Spectroscopy Requirements Polished Crystal Optics

Crystal Optics

Call for ATR Prisms and Unpolished Blanks

ICL celebrated its 50th anniversary in 2012. sized optics, coated optics, crystal and other optical We have produced quality crystal optics for materials not listed and optical assemblies such

spectroscopy and CO2 lasers since 1962. ICL as beam splitters. We can produce optics from operates a vertically integrated crystal optics crystal materials such as CdMnTe, CdMnHgTe, production plant. We grow our own crystals and CdZnTe, CdMgTe, CdTe, Si, LiF, CsBr, AgBr,

we are the only U.S. producer of KBr crystals. We AgCl, MgF2 as well as from glass and composite welcome the opportunity to quote on custom materials such as polyethylene, BK-7 and AMTIR.

WAVELENGTH RANGE FOR IR MATERIALS - MICRONS & CM-1 2.5 5 10 15 20 50m

11 Erie Street Garﬁ eld, NJ 07026 USA 4,000 2,000 1,000 666 500 200 Tel: (973) 478-8944 Fax: (973) 478-4201 Copyright ©2013 International Crystal Laboratories www.internationalcrystal.net There are third party trademarks used in this catalog and listed on the back cover. [email protected]

1 — ICL Polished Crystal Optics

Infrasil ZNS CRYSTAL SIZE NACL KCL KBR CAF2 BAF2 CSI KRS-5 QTZ CLEARTRAN* ZNSE* AGCL AGBR Discs 6mm x 1mm 0002A-1003 0002B-1004 0002C-1005 0002D-1006 0002E-1007 0002F-1008 0002G-1009 0002H-1010 0002I-1011 0002J-1821 0002K-1013 0002P-1014 $32.00 $34.00 $37.00 $65.00 $87.00 RFP RFP $71.00 $79.00 $79.00 $275.00 $325.00 13mm x 1mm 0002A-4549 0002B-4548 0002C-4085 0002D-4488 0002E-4435 0002F-4588 0002G-4589 0002H-4590 0002I-4591 0002J-4464 0002K-4592 0002P-8693 $22.00 $26.00 $31.00 $74.00 $111.00 RFP RFP $63.00 $143.00 $129.00 $275.00 $335.00 13mm x 2mm 0002A-68 0002B-164 0002C-144 0002D-403 0002E-303 0002F-95 0002G-108 0002H-326 0002I-94 0002J-1822 0002K-1386 0002P-7926 $23.00 $27.00 $33.00 $76.00 $112.00 RFP RFP $62.00 $137.00 $131.00 $275.00 $311.00 20mm x 2mm 0002A-623 0002B-1424 0002C-1854 0002D-1455 0002E-1449 0002F-1855 0002G-1856 0002H-1857 0002I-1858 0002J-1823 0002K-1374 0002P-4481 $28.00 $37.00 $36.00 $83.00 $133.00 RFP RFP $77.00 $195.00 $171.00 $340.00 $395.00 22mm x 4mm 0002A-110 0002B-125 0002C-248 0002D-410 0002E-1859 0002F-328 0002G-642 0002H-252 0002I-464 0002J-1826 0002K-1376 0002P-8694 $27.00 $33.00 $36.00 $86.00 $139.00 RFP RFP $86.00 $214.00 $187.00 $377.00 $395.00 25mm x 2mm 0002A-330 0002B-306 0002C-244 0002D-1457 0002E-340 0002F-565 0002G-245 0002H-4532 0002I-77 0002J-1825 0002K-4458 0002P-4406 $28.00 $35.00 $38.00 $83.00 $146.00 RFP RFP $76.00 $229.00 $214.00 $409.00 $469.00 25mm x 4mm 0002A-67 0002B-136 0002C-74 0002D-181 0002E-176 0002F-137 0002G-73 0002H-321 0002I-77* 0002J-1825* 0002K-1237 0002P-4984 $24.00 $30.00 $35.00 $87.00 $157.00 RFP RFP $92.00 $229.00 $214.00 $476.00 $534.00 25.2mm x 5mm 0002A-82 0002B-115 0002C-81 0002D-548 0002E-91 0002F-145 0002G-233 0002H-436 0002I-522 0002J-1827 0002K-1373 0002P-5654 $24.00 $30.00 $35.00 $96.00 $163.00 RFP RFP $99.00 $229.00 $214.00 $464.00 $519.00 32mm x 3mm 0002A-83 0002B-508 0002C-175 0002D-259 0002E-535 0002F-277 0002G-344 0002H-1427 0002I-151 0002J-1828 0002K-1425 0002P-4476 $33.00 $36.00 $43.00 $114.00 $206.00 RFP RFP $114.00 $352.00 $339.00 $689.00 $743.00 32mm x 3mm 0002A-84 0002B-247 0002C-118 0002D-336 0002E-536 0002F-3049 0002G-1861 0002H-1463 0002I-152 0002J-1829 0002K-1860 0002P-4477 Drilled $36.00 $41.00 $49.00 $128.00 $229.00 RFP RFP $135.00 $365.00 $349.00 $740.00 $791.00 37.5mm x 4mm 0002A-170 0002B-317 0002C-155 0002D-262 0002E-384 0002F-271 0002G-143 0002H-664 0002I-1862 0002J-1830 0002K-1863 0002P-8695 $47.00 $57.00 $64.00 $159.00 $306.00 RFP RFP RFP $409.00 $417.00 $815.00 $899.00 38mm x 6mm 0002A-97 0002B-275 0002C-150 0002D-359 0002E-1381 0002F-159 0002G-371 0002H-479 0002I-647 0002J-1831 0002K-1864 0002P-8721 $49.00 $63.00 $72.00 $156.00 $306.00 RFP RFP $259.00 $419.00 $397.00 $875.00 $983.00 49mm x 6mm 0002A-121 0002B-104 0002C-122 0002D-339 0002E-1445 0002F-130 0002G-357 0002H-441 0002I-1865 0002J-1832 0002K-1866 0002P-8696 $79.00 $101.00 $129.00 $199.00 $477.00 RFP RFP $299.00 $607.00 $629.00 $1259.00 $1319.00 50mm x 3mm 0002A-432 0002B-587 0002C-655 0002D-1022 0002E-523 0002F-472 0002G-1023 0002H-1024 0002I-1025 0002J-1833 0002K-1027 0002P-4576 $73.00 $103.00 $139.00 $205.00 $384.00 RFP RFP $249.00 $669.00 $595.00 $1139.00 $1211.00

Rectangles 25mm x 12mm x 2mm 0002A-89 0002B-392 0002C-75 0002D-285 0002E-391 0002F-241 0002G-1879 0002H-573 0002I-286 0002J-1835 0002K-1880 0002P-8697 $28.00 $33.00 $37.00 $66.00 $81.00 RFP RFP RFP $239.00 $225.00 $395.00 $467.00 1" x 1" x 4mm 0002A-106 0002B-334 0002C-389 0002D-559 0002E-1240 0002F-1882 0002G-3051 0002H-1883 0002I-1884 0002J-1837 0002K-1885 0002P-8698 $31.00 $38.00 $43.00 $87.00 $132.00 RFP RFP RFP RFP $279.00 $875.00 $983.00 30mm x 15mm x 4mm 0002A-93 0002B-139 0002C-123 0002D-324 0002E-134 0002F-162 0002G-361 0002H-1886 00021-404 0002J-1838 0002K-1389 0002P-4558 $27.00 $32.00 $37.00 $89.00 $127.00 RFP RFP $99.00 $299.00 $289.00 $476.00 $551.00 30mm x 15mm x 4mm 0002A-278 0002B-1405 0002C-183 0002D-1888 0002E-135 0002F-379 0002G-555 0002H-1887 0002I-584 0002J-1839 0002K-1418 0002P-8699 Drilled $34.00 $37.00 $41.00 $104.00 $145.00 RFP RFP $119.00 $245.00 $355.00 $515.00 $587.00 38.5mm x 19.5mm x 4mm 0002A-71 0002B-156 0002C-69 0002D-142 0002E-103 0002F-305 0002G-165 0002H-291 0002I-116 0002J-1840 0002K-615 0002P-4397 $33.00 $37.00 $40.00 $106.00 $196.00 RFP RFP $139.00 $379.00 $297.00 $655.00 $769.00 38.5mm x 19.5mm x 4mm 0002A-70 0002B-157 0002C-80 0002D-92 0002E-102 0002F-325 0002G-433 0002H-290 0002I-117 0002J-1841 0002K-654 0002P-4551 Drilled $38.00 $41.00 $44.00 $125.00 $219.00 RFP RFP $155.00 $399.00 $293.00 $707.00 $803.00 41mm x 23mm x 4mm 0002A-507 0002B-7467 0002C-8461 0002D-6037 0002E-8534 0002F-8579 0002G-8580 0002H-8581 0002I-528 0002J-1842 0002K-8582 0002P-8700 $36.00 $44.00 $46.00 $132.00 $249.00 RFP RFP RFP $379.00 $349.00 $623.00 $743.00 41mm x 23mm x 4mm 0002A-4439 0002B-7468 0002C-6643 0002D-8583 0002E-8535 0002F-8584 0002G-8585 0002H-8586 0002I-529 0002J-1843 0002K-8587 0002P-8701 Drilled $41.00 $49.00 $51.00 $163.00 $275.00 RFP RFP RFP $399.00 $369.00 $671.00 $803.00 41mm x 23mm x 6mm 0002A-113 0002B-268 0002C-99 0002D-295 0002E-363 0002F-335 0002G-437 0002H-1889 0002I-528 0002J-1842 0002K-614 0002P-5072 $39.00 $44.00 $65.00 $139.00 $254.00 RFP RFP RFP $379.00 $349.00 $715.00 $829.00 41mm x 23mm x 6mm 0002A-114 0002B-269 0002C-100 0002D-296 0002E-400 0002F-1890 0002G-1891 0002H-1892 0002I-529 0002J-1843 0002K-1893 0002P-5073 Drilled $44.00 $49.00 $70.00 $166.00 $279.00 RFP RFP RFP $399.00 $369.00 $752.00 $819.00 39.5mm x 39.5mm x 6.5mm 0002A-111R 0002B-537R 0002C-86R 0002D-179R 0002E-322R 0002F-516R 0002G-1906R 0002H-1904R 0002I-1911R 0002J-1847R 0002K-1912R 0002P-8702 (Rectangle) $63.00 $71.00 $90.00 $317.00 $523.00 RFP RFP RFP RFP RFP RFP $1079.00 39.5mm x 39.5mm x 6.5mm 0002A-111H 0002B-537H 0002C-86H 0002D-179H 0002E-322H 0002F-516H 0002G-1906H 0002H-1904H 0002I-1911H 0002J-1847H 0002K-1912H 0002P-8705 (Hexagon) $67.00 $76.00 $96.00 $329.00 $543.00 RFP RFP RFP RFP RFP RFP $1199.00 39.5mm x 39.5mm x 6.5mm 0002A-112R 0002B-538R 0002C-87R 0002D-180R 0002E-323R 0002F-3089R 0002G-1907R 0002H-1905R 0002I-1910R 0002J-1848R 0002K-1913R 0002P-8703 (Rectangle), Drilled $68.00 $80.00 $95.00 $329.00 $535.00 RFP RFP RFP RFP RFP RFP $1139.00 39.5mm x 39.5mm x 6.5mm 0002A-112H 0002B-538H 0002C-87H 0002D-180H 0002E-323H 0002F-3089H 0002G-1907H 0002H-1905H 0002I-1910H 0002J-1848H 0002K-1913H 0002P-8706 (Hexagon), Drilled $72.00 $85.00 $101.00 $339.00 $553.00 RFP RFP RFP RFP RFP RFP $1247.00 45mm x 20mm x 6mm 0002A-107 0002B-450 0002C-166 0002D-1894 0002E-3052 0002F-1896 0002G-140 0002H-1897 0002I-341 0002J-1845 0002K-1898 0002P-8739 $54.00 $61.00 $81.00 $337.00 RFP RFP RFP RFP RFP RFP $1187.00 $1223.00 45mm x 20mm x 6mm 0002A-158 0002B-451 0002C-167 0002D-1895 0002E-1899 0002F-1900 0002G-141 0002H-1901 0002I-1902 0002J-1846 0002K-1903 0002P-8741 Drilled $60.00 $65.00 $85.00 RFP RFP RFP RFP RFP RFP RFP $1235.00 $1259.00 50mm x 25mm x 6mm 0002A-109 0002B-352 0002C-168 0002D-1914 0002E-1916 0002F-279 0002G-1919 0002H-1921 0002I-1923 0002J-1849 0002K-1925 0002P-8742 $57.00 $63.00 $89.00 RFP RFP RFP RFP RFP RFP RFP $1319.00 $1511.00 50mm x 25mm x 6mm 0002A-96 0002B-364 0002C-169 0002D-1915 0002E-1917 0002F-1918 0002G-1920 0002H-1922 0002I-1924 0002J-1850 0002K-1926 0002P-8743 Drilled** $62.00 $68.00 $93.00 RFP RFP RFP RFP RFP RFP RFP $1367.00 $1559.00

Call for any size or material not listed. RFP: Request for Price Call for AMTIR, Sapphire, MgF2, AgBr, CdTe, CdMnTe, CdMnHgTe, CdMgTe, CsBr, Polyethylene, Si and LiF. Call for unpolished windows, coated optics, beam splitters, ATR prisms & CIR rods.

*All Cleartran, ZnS and ZnSe Crystals are 2mm thick. ** When ordering drilled crystals of this size, please specify whether center or diagonal drilling is required. Tolerances: length, width and diameter: +0/-0.2mm. Thickness: ±0.5mm

ICL — 2 Real Crystal® IR Sample Cards & PTFE & Polyethylene IR Sample Cards

SEE IR Sample www.internationalcrystal.net For Spectra of Sample Card Cards Substrates–PTFE, Polyethylene, KBr, KCl & NaCl US Patent No. 7,932,095 UK Patent No. GB2372102

ICL’s new Real Crystal® IR sample cards provide Mining and UV/VIS/NIR Cuvettes - a conveniently mounted non-absorbing substrate Manufacturing See page 30 for qualitative infrared analysis. They are ideal Company. PTFE and for liquids, mulls, film casting from solutions and polyethylene IR sample pyrolosis samples. The 2” x 4” cards are available cards provide inexpensive with 9.5mm, 15mm and 19mm clear apertures disposable sample substrates for qualitative and they will fit in the universal slide mount of any analysis. The 2” x 4” cards mount vertically in the spectrophotometer. Space is provided to write on universal slide mount in any spectrophotometer. the card to identify the date of the analysis, the The cards have a clear aperture of 19mm and space sample identity and the name of the analyst. is provided to write on the card to identify the date of the analysis, the sample and the name of the Real Crystal® IR cards do not exhibit strong analyst. The cards are sold in packages of 10, 25 absorbance peaks that limit the utility of and 50. PTFE and polyethylene sample cards. The alkali halide sample support substrates (KBr, KCl and PTFE and Polyethylene cards exhibit absorbance NaCl) used in Real Crystal® IR sample cards bands in the 4400 to 400 CM-1 spectral range. For exhibit very high energy throughput. (see www. absorbance spectra of the substrates in these cards see internationalcrystal.net for spectra). www.internationalcrystal.net. ICL has also brought back the 3M® card, which we manufacture under a license from Minnesota Polyethylene and PTFE Sample Cards Part No. Description Price US Patents No. 5,470,757 0000-7095 NaCl-Pack of 25, 9.5mm aperture $109.00 & 5,764,355 & 5,290,705 0000-7096 KBr-Pack of 25, 9.5mm aperture $135.00 0000-7097 KCl-Pack of 25, 9.5mm aperture $114.00 0000-7131 NaCl-Pack of 25, 15mm aperture $121.00 0000-7132 KBr-Pack of 25, 15mm aperture $145.00 0000-7133 KCl-Pack of 25, 15mm aperture $123.00 0000-7087 NaCl-Pack of 25, 19mm aperture $135.00 0000-7090 KBr-Pack of 25, 19mm aperture $159.00 0000-7091 KCl-Pack of 25, 19mm aperture $139.00 0000-7361 Pack of 10 PTFE IR Sample Cards $50.00 0000-7362 Pack of 25 PTFE IR Sample Cards $74.00 0000-7363 Pack of 50 PTFE IR Sample Cards $134.00 0000-7364 Pack of 10 Polyethylene IR Sample Cards $57.00 0000-7365 Pack of 25 Polyethylene IR Sample Cards $79.00 0000-7366 Pack of 50 Polyethylene IR Sample Cards $139.00

11 Erie Street Garﬁ eld, NJ 07026 USA Tel: (973) 478-8944 Fax: (973) 478-4201 www.internationalcrystal.net [email protected]

3 — ICL Precision Demountable Cells, SL-2 Demountable Cell Kit & Pres-N-Lok Demountable Cell

Pres-N-Lok Demountable Cells

SL-2 Demountable Cell

Sandwich cells available FTIR Dispersive

Precision Demountable Cell

Demountable Cells are ideal for mulls, capillary that the amalgam seal has been replaced by a films, cast films and thin films of finely powdered demountable PTFE spacer, and gasket. The window solids in slurry form. The Precision Demountable size is 32mm x 3mm. The Demountable SL-2 Cell (“PDC”) can also be used for liquid analysis Cell Kit comes complete with the cell and cell with its luer syringe fittings. The PDC is constructed holder assembly for FTIR or dispersive, one PTFE of stainless steel and is designed for easy assembly O-ring, two gaskets, one aluminum needle/pin plate and disassembly for cleaning and changing the with luer lock syringe ports, two PTFE plugs, one pathlength. The inside surfaces of the PDC are space compensator for use with 2mm thick optical lapped optically flat to ensure leak free seals. It can windows and assorted 32mm spacers, but without be completely disassembled for cleaning simply windows. The cell holder and mounting plate can by unscrewing the convenient thumb screws on also be used with sealed sandwich cells if precision the front plate of the cell. The pathlength can pathlengths are required. be changed simply by using a spacer with a The Micro Quik Cell kit comes with 6 pressed Micro-Quik Cell different thickness between the windows or by AgCl 13 x 1mm windows, which cold flow for using sandwich cells. The window size is 38.5mm AgCl Windows good seals and can be used with wet samples. x 19.5mm x 4mm. AgCl transmits through the full spectral range ICL’s Pres-N-Lok Cell enables the user to analyze of most FTIR spectrophotometers. Each window mulls and smears without the use of clumsy has a 0.025mm circular depression in the middle, springs, nuts, and bolts. The cell is assembled by allowing windows to be positioned face to face for placing the sample on one (1) of two (2) 25mm x a 0.05mm pathlength, back to face for a 0.025mm 4mm crystal windows separated by a PTFE spacer, pathlength and back to back for making mulls. The dropping them into the bore of the inner barrel, and windows have flat rims with a bevel to assure pressing in the outer barrel. sealing in the mount provided with the kit. The Demountable SL-2 is the same as the SL-2 sealed precision liquid cell (see page 5), except

Part No. Description Price 0006-497 Dispersive (rectangular aperture) Precision Demountable Cell, without windows $153.00 0006-604 FTIR (circular aperture) Precision Demountable Cell, without windows $153.00 0006-5064 Thumbscrews (1pk/4) for 2mm thick windows $60.00 0006-2467 Pres-N-Lok Cell complete with assorted spacers, but without windows $133.00 0006-2090 Micro Quik Cell Kit with cell, 6 AgCl windows and slide holder $269.00 0006-4153 Demountable SL-2 Cell Kit for Dispersive Instrument, without windows $165.00 11 Erie Street 0006-4154 Demountable SL-2 Cell Kit for FTIR Instrument, without windows $165.00 Garﬁ eld, NJ 07026 USA Tel: (973) 478-8944 0006-4122 Cell Holder for Dispersive Instrument without needle/pin plate $112.00 Fax: (973) 478-4201 0006-4124 Cell Holder for FTIR Instrument without needle/pin plate $112.00 www.internationalcrystal.net [email protected]

ICL — 4 Sealed IR Liquid Cells

Sealed Liquid Cells

SL-3

Sandwich cells available

SL-2

SL-4P

SL-4

NEW 2.5 micron, 5 micron, 7.5 micron & 10 micron pathlengths — RFQ

Sealed liquid cells are used for precision analysis. most labs and is highly recommended for short Pathlengths can be measured with accuracy to pathlength cells because of its durability and ease four decimal places, permitting interchangeable of filling using the proper techniques. use and reproducibility of results. The metal Variable Pathlength Cell The SL-2 has an aluminum body with a black surfaces of all ICL sealed cells are lapped optically anodized back plate and it uses 32 x 3mm discs as flat to insure perfect leak free amalgam seals. The optics. The main benefit of the SL-2 is that it can seals are created by mercury to lead or mercury to also be used as a demountable cell. The cell holder copper amalgams. The major differences between and the optics are not amalgamated together as in the models offered by ICL are in optics, durability the case of the SL-3 and SL-4. Rather, the SL-2 and alternate functions. has a sandwich cell containing its own luer lock The SL-4 is a heavy duty cell with machined hypodermic fittings inserted in an aluminum plate, 1/4” thick stainless steel front and back plates. often referred to as a needle plate or pin plate, The optics are 39.5 x 39.5 x 6.5mm hexagons. to which the optics are amalgamated. The SL-2 These cells are designed to permit reconditioning sandwich cell drops into the holder to form a of halide windows without the need to replace sealed cell, permitting the user to have a number them. The SL-4 is available in a configuration of sandwich cells with different pathlengths that (the SL-4P) where the luer lock filling ports fit the same holder or to simply remove the sealed are mounted on the edge of the front plate, sandwich cell and use the holder for mulls with thereby permitting the optical path in the unsealed optics. The SL-2 is not recommended for spectrophotometer to be permanently purged short pathlengths (0.025 and 0.015mm). while the sample compartment is opened using a Flow cells that are permanently sealed are also Constant Purge™ adapter. available. The SL-3 HPF and SL-4 HPF allow use The SL-3 is also stainless steel, but uses less of high pressures with cells made in the SL-3 expensive 38.5 x 19.5 x 4mm rectangular windows and SL-4 configuration and the SL-5 provides 11 Erie Street and sandwich cells are available to replace the compression fittings for flow cell tubing. Garﬁ eld, NJ 07026 USA Tel: (973) 478-8944 optics and the spacers. The SL-3 filling ports are Fax: (973) 478-4201 configured optimally for proper filling and draining www.internationalcrystal.net of liquid samples. The SL-3 is the basic choice of [email protected]

5 — ICL Sealed IR Liquid Cells

Pathlength - Rectangular Aperture – SL-2 Dispersive MATERIAL .015mm .025mm .05mm 0.1mm 0.2mm 0.5mm 1mm PRICE NaCl 0005A-2899 0005A-2900 0005A-2901 0005A-2902 0005A-2903 0005A-2904 0005A-2905 $277.00 KCl 0005B-2906 0005B-2907 0005B-2908 0005B-2909 0005B-2910 0005B-2911 0005B-2912 $294.00 KBr 0005C-2913 0005C-2914 0005C-2915 0005C-2916 0005C-2917 0005C-2918 0005C-2919 $307.00 CaF2 0005D-2920 0005D-2921 0005D-2922 0005D-2923 0005D-2924 0005D-2925 0005D-2926 $455.00 BaF2 0005E-2927 0005E-2928 0005E-2929 0005E-2930 0005E-2931 0005E-2932 0005E-2933 $647.00 CSI 0005F-2941 0005F-2942 0005F-2943 0005F-2944 0005F-2945 0005F-2946 0005F-2947 RFP KRS-5 0005G-2934 0005G-2935 0005G-2936 0005G-2937 0005G-2938 0005G-2939 0005G-2940 $1389.00 INFRASIL QTZ. 0005H-4136 0005H-4137 0005H-4138 0005H-4139 0005H-4140 0005H-4141 0005H-4142 $453.00 CLEARTRAN/ZnS 0005I-2948 0005I-2949 0005I-2950 0005I-2951 0005I-2952 0005I-2953 0005I-2954 $909.00 ZnSe 0005J-2955 0005J-2956 0005J-2957 0005J-2958 0005J-2959 0005J-2960 0005J-2961 $874.00 IR Sealed AgCl 0005K-2962 0005K-2963 0005K-2964 0005K-2965 0005K-2966 0005K-2967 0005K-2968 $1759.00 Liquid Cells Pathlength - Circular Aperture – SL-2 FTIR SL-2 MATERIAL .015mm .025mm .05mm 0.1mm 0.2mm 0.5mm 1mm PRICE NaCl 0005A-2969 0005A-2970 0005A-2971 0005A-2972 0005A-2973 0005A-2974 0005A-2975 $277.00 KCl 0005B-2976 0005B-2977 0005B-2978 0005B-2979 0005B-2980 0005B-2981 0005B-2982 $294.00 KBr 0005C-2986 0005C-2987 0005C-2988 0005C-2989 0005C-2990 0005C-2991 0005C-2992 $307.00 CaF2 0005D-2993 0005D-2994 0005D-2995 0005D-2996 0005D-2997 0005D-2998 0005D-2999 $455.00 BaF2 0005E-3000 0005E-3001 0005E-3002 0005E-3003 0005E-3004 0005E-3005 0005E-3006 $647.00 CSI 0005F-3014 0005F-3015 0005F-3016 0005F-3017 0005F-3018 0005F-3019 0005F-3020 RFP KRS-5 0005G-3007 0005G-3008 0005G-3009 0005G-3010 0005G-3011 0005G-3012 0005G-3013 $1389.00 INFRASIL QTZ. 0005H-4143 0005H-4144 0005H-4145 0005H-4146 0005H-4147 0005H-4148 0005H-4149 $453.00 CLEARTRAN/ZnS 0005I-3021 0005I-3022 0005I-3023 0005I-3024 0005I-3025 0005I-3026 0005I-3027 $909.00 ZnSe 0005J-3028 0005J-3029 0005J-3030 0005J-3031 0005J-4059 0005J-3032 0005J-3033 $879.00 AgCl 0005K-3034 0005K-3035 0005K-3036 0005K-3037 0005K-3038 0005K-3039 0005K-3040 $1759.00 *Note: Cells with pathlength of 2-4mm add $35.00 to above prices. Pathlengths 5-10mm add $69 to above prices. Add $16.00 for cell calibration, $36.00 each for cell matching and $53.00 each for all matching of .015/.025/.03/.075 mm cells. Sealed Liquid Pathlength - Rectangular Aperture – SL-3 Dispersive Cells SL-3 Pathlength – Spacer Thickness MATERIAL .015mm .025mm .05mm 0.1mm 0.2mm 0.5mm 1mm PRICE NaCl 0005A-590 0005A-591 0005A-592 0005A-593 0005A-594 0005A-595 0005A-596 $249.00 KCl 0005B-783 0005B-784 0005B-785 0005B-786 0005B-787 0005B-788 0005B-789 $259.00 KBr 0005C-2096 0005C-777 0005C-778 0005C-779 0005C-780 0005C-1448 0005C-782 $269.00 CaF2 0005D-790 0005D-791 0005D-792 0005D-793 0005D-794 0005D-795 0005D-796 $409.00 BaF2 0005E-797 0005E-798 0005E-799 0005E-800 0005E-801 0005E-802 0005E-803 $499.00 CSI 0005F-804 0005F-805 0005F-806 0005F-807 0005F-808 0005F-809 0005F-810 $1259.00 KRS-5 0005G-811 0005G-812 0005G-813 0005G-814 0005G-815 0005G-816 0005G-817 $1259.00 INFRASIL QTZ. 0005H-824 0005H-826 0005H-827 0005H-828 0005H-829 0005H-830 0005H-831 $439.00 CLEARTRAN/ZnS 0005I-818 0005I-819 0005I-820 0005I-821 0005I-822 0005I-1080 0005I-823 $929.00 ZnSe 0005J-839 0005J-840 0005J-841 0005J-842 0005J-843 0005J-844 0005J-845 $699.00 AgCl 0005K-832 0005K-833 0005K-834 0005K-835 0005K-836 0005K-837 0005K-838 $1669.00 Sealed Liquid Pathlength - Circular Aperture – SL-3 FTIR Cells SL-4 MATERIAL .015mm .025mm .05mm 0.1mm 0.2mm 0.5mm 1mm PRICE NaCl 0005A-853 0005A-854 0005A-855 0005A-856 0005A-857 0005A-858 0005A-859 $249.00 KCl 0005B-860 0005B-861 0005B-862 0005B-863 0005B-864 0005B-865 0005B-866 $259.00 KBr 0005C-867 0005C-868 0005C-869 0005C-870 0005C-871 0005C-872 0005C-873 $269.00 CaF2 0005D-1082 0005D-874 0005D-875 0005D-876 0005D-877 0005D-878 0005D-879 $409.00 BaF2 0005E-880 0005E-881 0005E-882 0005E-883 0005E-884 0005E-885 0005E-886 $499.00 CSI 0005F-887 0005F-888 0005F-889 0005F-890 0005F-891 0005F-892 0005F-893 $1259.00 KRS-5 0005G-894 0005G-895 0005G-1081 0005G-896 0005G-897 0005G-898 0005G-899 $1259.00 INFRASIL QTZ. 0005H-907 0005H-908 0005H-909 0005H-910 0005H-911 0005H-912 0005H-913 $439.00 CLEARTRAN/ZnS 0005I-900 0005I-901 0005I-902 0005I-903 0005I-904 0005I-905 0005I-906 $929.00 ZnSe 0005J-930 0005J-931 0005J-932 0005J-933 0005J-934 0005J-935 0005J-936 $699.00 AgCl 0005K-923 0005K-924 0005K-925 0005K-926 0005K-927 0005K-928 0005K-929 $1669.00 *Note: Cells with pathlength of 2-4mm add $35.00 to above prices. Pathlengths 5-10mm add $69 to above prices. Add $16.00 for cell calibration, $36.00 each for cell matching and $47.00 each for all matching of .015/.025/.03/.075 mm cells.

Pathlength – Spacer Thickness – SL4 MATERIAL .015mm .025mm .05mm 0.1mm 0.2mm 0.5mm 1mm PRICE Variable Pathlength Cell NaCl 0005A-1965 0005A-1966 0005A-1967 0005A-1968 0005A-1969 0005A-1970 0005A-1971 $511.00 KCl 0005B-1972 0005B-1973 0005B-1974 0005B-1975 0005B-1976 0005B-1977 0005B-1978 $519.00 KBr 0005C-1979 0005C-1980 0005C-1981 0005C-1982 0005C-1983 0005C-1984 0005C-1985 $539.00 CaF2 0005D-1986 0005D-1987 0005D-1988 0005D-1989 0005D-1990 0005D-1991 0005D-1992 $793.00 BaF2 0005E-1993 0005E-1994 0005E-1995 0005E-1996 0005E-1997 0005E-1998 0005E-1999 $1137.00 ZnSe 0005J-7435 0005J-7436 0005J-7437 0005J-7438 0005J-7439 0005J-7440 0005J-7441 $1189.00 *Note: Cells with pathlength of 2-4mm add $35.00 to above prices. Pathlengths 5-10mm add $69.00 to above prices.

Calibration & Matching 0010-186 Calibration of cells $16.00 0010-185 Calibration & matching of cells $36.00 0010-4170 Calibration & matching of .015/.025/.03/.075 mm cells, except SL-2 $49.00 11 Erie Street 0010-7901 Calibration & matching of 015/.025/.03/.075 mm SL-2 cells $56.00 Garﬁ eld, NJ 07026 USA 0010-4169 Calibration of variable pathlength cell $179.00 Tel: (973) 478-8944 Fax: (973) 478-4201 Part No. Variable Pathlength Cell Price www.internationalcrystal.net 0005B-2064 KCI $1879.00 [email protected] 0005C-2065 KBr $1933.00

ICL — 6 Reconditioning

Reconditioning of Cell Liquid & Gas Cells Reconditioning

Varian, Digilab & Bio-Rad

Infrared Liquid & Gas Cell Reconditioning Part No. Description Price 0010-76 Disassembly and reassembly of liquid cell $46.00 0010-4167 Disassembly and reassembly of gas cell $63.00 0010-4528 Disassembly and reassembly of variable path mini gas cell and permanently aligned cell RFP 0010-4168 Disassembly and reassembly of variable path liquid cell $309.00 0010-4169 Calibration of variable path liquid cell $179.00 0010-186 Calibration of cell $16.00 0010-185 Calibration and matching of cell $36.00 0010-4170 Calibration and matching of .015/.025/.03/.075 mm cells, except SL-2 $49.00 0010-7901 Calibration and matching of .015/.025/.03/.075 mm SL-2 cells $56.00 0010-4297 Soldering of fitting $33.00 Thermo Nicolet 0010-XXXX Recondition Long Path Gas Cell RFP

Reconditioning of Oil Analyzer Flow Cells

Reconditioning of Oil Analyzer Flow Cells 11 Erie Street Garﬁ eld, NJ 07026 USA ICL reconditions oil flow cells for the Thermo Nicolet Avatar 360, the Varian FT-IR Oil Analyser, Tel: (973) 478-8944 the Bio-Rad Oil Analyzer and the Digilab Oil Analyzer. All reconditioned cells are calibrated and Fax: (973) 478-4201 tested under pressure. If requested by customer, windows can be wedged to limit fringing. www.internationalcrystal.net Contact ICL for pricing guidelines. [email protected]

7 — ICL Gemini™ Gas Cell Solar System

Gas Cells

Gas cell configuration

ICL’s Gemini™ Gas Cells comprise an entire system Earth™ Gas Cells: moderate volume (2 to 8 liter of gas cell configurations suited for FTIR and laser borosilicate glass long path gas cells with fixed and spectroscopy. Gemini™ Gas Cells are available in variable path lengths (10 to 20 meters). High stability numerous standard configurations; and cells can be Mars™ Gas Cells: rugged and robust moderate configured with virtually any custom path length, temperature controller volume (1 to 5 liter) all metal long path gas sample compartment material, seal composition, www.internationalcrystal.net cells comprised of stainless steel (passivated or mirror or optic coating and inlet or outlet style. In electropolished) or nickel plated aluminum bodies summary, the Gemini™ Gas Cell solar system includes: for demanding or corrosive applications requiring Mercury™ Gas Cells: short path length single pass durability. Path lengths range from 1 to 20 meters and Gemini™ Gas Cells with low volumes (100cc to 0.5 liter) pressures range from vacuum (1x10-10 Torr) to 125 psi. from nickel plated stainless steel. Pathlengths range Saturn™ Gas Cells: research grade ultra long path from 10cm to 2.5 meters. Vacuum rating 1x10-8 Torr. gas cells (50 to 100 meters) with borosilcate or fused Venus™ Gas Cells: low volume (0.5 to 1 liter) silica bodies with laser alignment. borosilicate glass and aluminum bodied long path gas The Gemini™ solar system combined with ICL’s Basics cells with fixed and variable path lengths (1 to 6.5 Gas Cells offers a solution to every sample analysis meters), including our popular long path mini cells. problem and for every budget.

Gas Cell Selection Guide Applications & Configurations Corrosive Glass Metal PTFE Variable Laser Modest Short Special Pure Sub PPM Vacuum Heatable Sample Body Body Body Path Length Alignment Cost Path Length Gases Gases Gas Test Cell Mercury Mercury Venus Mercury ICL Venus Saturn Venus Mercury Mercury Mercury Saturn Mercury Models Mars Mars Earth Mars Earth ICL ICL Mars Mars Venus Mars ICL Saturn Mars Mars ICL Saturn Earth

11 Erie Street Garﬁ eld, NJ 07026 USA Tel: (973) 478-8944 Fax: (973) 478-4201 www.internationalcrystal.net [email protected]

ICL — 8 Model G-2 Gas Cell — 5cm or 10cm

Gas Cells

The G-2 Gas Cell is for analysis of pure gases The window size is 38mm x 6mm. The clear or gas mixtures in which component gases are aperture of the cell is 32mm. Demountable present at concentrations of 5 percent or more. Beta Gas Cell The G-2 is available in a variety of optical window The G-2 Gas Cell has a fixed pathlength of either materials, two pathlengths and a choice of ground 5cm or 10cm. The windows of thex cell are easy tapered endings with 12/30 joints (TPE), plain to remove for cleaning, making the G-2 ideal for endings joints (PTE) or ground semi-ball joints working with wet or reactive gases that have with 18/9 joints (SBJ). (See notes beneath chart a tendency to fog or attack the window material. and Figure 1). The G-2 cell comes completely assembled in TPE 12/30 joints The Beta Gas Cell is an inexpensive demountable a stainless steel universal 2” x 3” mount. gas cell that uses 25 x 4mm windows and is ® It includes a Pyrex glass body, silicon rubber or available in 5 or 10cm versions. Viton® gaskets and a choice of optical materials.

SBJ 18/9 Material Catalog Number Price joints Gas Connection 5 cm 10 cm NaCl PTE 0008A-715 0008A-711 $449.00 SBJ 0008A-716 0008A-712 $449.00 Figure 1. TPE 0008A-714 0008A-710 $449.00 KCl PTE 0008B-720 0008B-717 $479.00 SBJ 0008B-721 0008B-718 $479.00 TPE 0008B-719 0008B-713 $479.00 KBr PTE 0008C-726 0008C-723 $516.00 SBJ 0008C-727 0008C-724 $516.00 TPE 0008C-725 0008C-722 $516.00 CaF2 PTE 0008D-732 0008D-729 $659.00 SBJ 0008D-733 0008D-730 $659.00 TPE 0008D-731 0008D-728 $659.00 BaF2 PTE 0008E-739 0008E-735 $879.00 SBJ 0008E-740 0008E-736 $879.00 TPE 0008E-737 0008E-734 $879.00 INFRASIL QTZ PTE 0008H-5030 0008H-5031 $649.00 SBJ 0008H-5032 0008H-5033 $639.00 TPE 0008H-5034 0008H-5035 $629.00 AgCl PTE 0008K-763 0008K-760 $1049.00 SBJ 0008K-764 0008K-761 $1049.00 11 Erie Street TPE 0008K-762 0008K-759 $1049.00 Garﬁ eld, NJ 07026 USA BETA GAS CELL 0008-505 0008-504 $329.00 Tel: (973) 478-8944 Fax: (973) 478-4201 * PTE = Plain tubular endings. This is a straight tube, not ground. www.internationalcrystal.net SBJ = Semi ball ending with 18/9 joints. This is a ground joint, 18mm diameter at widest with 9mm hole. [email protected] TPE = Tapered ending with 12/30 joints. This is a ground joint, 12mm diameter at widest, 30mm in length.

9 — ICL Gas Cells

Gas Cells Model G-2SS 10cm Stainless Steel Gas Cell

The G-2SS stainless steel gas cell is useful for 2” x 3” slide mount that fits all spectrophotometers. qualitative analysis of pure gases and mixtures where There are inlet and outlet ports equipped with vacuum one or more of the constituent gases are present in valves and hose barbs that are configured to also concentrations of at least 5 percent. It can be used in allow flowing gas through the cell. A 1/4 NPT port in situations that make use of a glass cell impractical, the side of the cell allows the addition of a pressure such as applications involving high pressure or gases gauge, a thermocouple and other probes. The cell Heated gas cell that etch a glass cell body. The only functional comes with an assortment of silicon, nitrile, PTFE See page 11 constraint on the pressure that can be applied to and viton “O” rings and gaskets. KBr and NaCl are this cell is the window material selected. The clear the basic window material, but other materials are aperture of the cell is 39mm and it uses 47mm x available upon request. Can be heated. 6mm windows. Like the G-2, this cell uses a universal

Part No. Description Price 0008-5160 G-2SS, NaCl windows $1169.00 0008-5161 G-2SS, KBr windows $1219.00 0008-5162 Cylindrical Cell Holder $165.00 0008-5584 Optional Pressure Gauge $369.00 0008-5804 PTFE Gaskets (1pk/4) $30.00 0008-5321 Nitrile “O” Rings (1pk/4) $28.00 0008-5805 PTFE “O” Rings (1pk/4) $30.00 0008-XXXX Replacement 47 x 6mm windows, all materials RFP 0008-7329 Heater Jacket and accessories $1199.00

Long Path Mini Gas Cell G-3PTFE 10cm Variable 1 to 5 meters PTFE Gas Cell See page 14

All components of the G-3PTFE 10cm gas cell that the constituent gases are present in concentrations contact the sample can be made entirely of PTFE, of 5% or more. The G-3PTFE has a clear aperture making the cell useful for any gas sample that might of 39mm and uses 47 x 6mm windows. Swagelok® attack, or be contaminated by, glass or stainless SS valves are standard, but PFA valves are optional. A steel gas cell components. The G-3PTFE is useful heated version is available. Requires a cell mount (Part for analysis of pure gases and mixtures in which No. 0008-5162).

Part No. Description Price 11 Erie Street Garﬁ eld, NJ 07026 USA 0008-7326 Model G-3 10cm PTFE gas cell, with NaCl windows, SS Swagelok® valve $1489.00 Tel: (973) 478-8944 ® 0008-7327 Model G-3 10cm PTFE gas cell, with KCl windows, SS Swagelok valve $1519.00 Fax: (973) 478-4201 ® 0008-7328 Model G-3 10cm PTFE gas cell, with KBr windows, SS Swagelok valve $1579.00 www.internationalcrystal.net 0008-5162 Cylindrical Cell Holder for 10cm PTFE gas cell $165.00 [email protected]

ICL — 10 Temperature Controlled Cells

Gas Cells

Heated Vapor Gas Multi-Sampler

Figure 2 Gas cell configuration with Swagelok® valves

This heated cell can be configured as a gas cell (Fig. 200°C. Condensation on the optics is minimized by 2) or for vaporizing samples that are normally solids heating them to the same temperature as the sample or liquids at room temperature. Configured for gas chamber. A type J iron constantan thermocouple is sampling, the cell incorporates 2 valves, an inlet and provided with plugs which are compatible with the an outlet, that enable flowing gas samples through the optional temperature controller. The cell body is type cell. In its solid and liquid vaporization configuration, 304 stainless steel and an assortment of seals is the cell has an outlet needle valve from which a provided – silicon, viton PTFE and nitrile. vacuum can be pulled and two (2) sample inlets. Cells are factory pretested for vacuum leaks using One inlet is a needle septa injection port on the top dummy windows and then new windows are shipped of the cell which is similar to the type used in gas with the cell. The cell comes standard with 47 x 6mm High stability chromatography. There is a second inlet in the form KCl windows. The clear aperture is 39mm. Other temperature controller of a side port for inserting solid samples, which window materials are available. An optional high stability www.internationalcrystal.net also doubles as the thermocouple port. Using the temperature controller with RS-232 computer interface side port eliminates the need to recheck vacuum and Windows® compatible software is available. The seals whenever the cell is opened to insert solid temperature controller has ramp and soak cycles that samples. The heating jacket extends over the end of can be programmed either on the keypad or the cell so that both the cell body and the optics are from a PC using the provided software and the heated, and allows operation at temperatures up to RS232 interface.

Part No. Description Price 0007-5546 10cm vapor gas multi-sampler with sheathed Iron Constantan 304SS type J $2,269.00 thermocouple, 115v, 250w heater system, Swagelok® vacuum valve, thermocouple port, injection port heatable to 200 degrees C, heated windows to prevent fogging, KCl windows, 303SS body. 0007-5547 Same as 0007-5546 with KBr windows. $2,439.00 0017-5548 High Stability PID Temperature Controller for 0007-5546, 110v, RS-232 interface and $1,199.00 Windows® based software for PC control, digital readout, keypad or PC programmable for ramp up, ramp down, set point, and soak (dwell) time as well as for temperature settings, digital readouts of all parameters. See www.internationalcrystal.net for more details. 0017-4804 Same as 0017-5548 but 230 volts $1,399.00 0008-5162 Cylindrical Cell Holder for 0007-5546 and 0007-5547 $ 165.00 0007-7405 10cm heated gas cell, KCl windows, two Swagelok® valves, type J Iron Constantan $2,379.00 11 Erie Street thermocouple, 115v, 250w heater jacket. Requires temperature controller Garﬁ eld, NJ 07026 USA (Part no. 0017-5548) and cell mount (Part No. 0008-5162). Tel: (973) 478-8944 0007-7406 Same as 0007-7405 with KBr windows $2,449.00 Fax: (973) 478-4201 www.internationalcrystal.net 0008-7329 Replacement Heater Jacket $1,199.00 [email protected]

11 — ICL Mercury™ Single Pass Short Path Length Stainless Steel Specialty Gas Cells

Gas Cells

caption here

Short Path Gas cells are useful for pure gases and, generally mounted and heated versions with temperature controllers. speaking, for concentrations of not less than 100 ppm. Cell Purge maintaining connectors or couplers extending from the utility for various ppm concentrations is dependent not only on cell body to the sample compartment walls are standard on path length, but also on the absorbance characteristics of the many base plate mounted models and purge gas connections sample. Feel free to consult with us on these and any other are an available option. A wide variety of window materials issues concerning selection of an appropriate gas cell. can be used. Wedged windows are available to limit fringing. Instrument specific spectrophotometer interfaces are available. ICL’s Gemini™ gas cell line begins with our Mercury™ short path length single pass gas cells constructed of electropolished 316 Mercury™ cells feature high-vacuum welded gas fittings Stainless Steel, available in standard path lengths of 1cm, 2cm, without valves comprising the sample inlet and outlet to 3cm, 5cm, 10cm and 15cm. Custom path length cells for a maintain the leak-free integrity of the cell and assure high variety of applications are also available. vacuum performance. Inlets and outlets comprise a Swagelok® VCR gland, a VCR female nut, a male VCR nut and a 1/4” These robustly constructed gas cells are ideal for specialty Swagelok® adapter. Valve kits are available. gas analysis, because they are leak tight and capable of high vacuum performance exceeding 1 x 10-8 Torr, and they also can Several common Mercury™ cell configurations are shown, be made pressure-safe with appropriate window material and but custom configurations are available upon request. Prices thickness selection. Each Mercury™ cell is individually helium do not include windows, which can be selected from our leak tested or hydrostatically tested and a test certificate can transmission window price list. RFQ for wedged windows. be supplied with any cell for $299.00 (Part No. 0009-9281). Cell mounting and other hardware, exclusive of the cell body material and valves, is black anodized aluminum. See www. Mercury™ cell configurations include base plate mounted, slide internationalcrystal.net for more information.

Part Temp. Spectrophotometer- Pressure Window Price Number Cell Body Material Pathlength Vol. Temp. Range Controller Heater Specific Interface Range Size w/o windows 0008-9272 316 SS 15cm 0.15L ambient – 200oC Optional Optional Optional Vacuum – 45psi* 37.5 x 4 $3,699.00 electropolished 0017-XXXX 0008-9278 0008-9279 0008-9273 316 SS 10cm 0.1L ambient – 200oC Optional Optional Optional Vacuum – 45psi* 37.5 x 4 $2,999.00 electropolished 0017-XXXX 0008-9278 0008-9279 0008-9274 316 SS 5cm 0.05L ambient – 200oC Optional Optional Optional Vacuum – 45psi* 37.5 x 4 $2,999.00 electropolished 0017-XXXX 0008-9278 0008-9279 0008-9275 316 SS 1cm 0.01L ambient – 200oC Optional Optional Optional Vacuum – 45psi* 25 x 4 $2,799.00 electropolished 0017-XXXX 0008-9278 0008-9279 0008-9276 316 SS electropolished 1cm 0.01L ambient – 200oC Optional Optional Optional Vacuum – 45psi* $2,399.00 slide mounted 0017-XXXX 0008-9278 0008-9279 0008-9277 316 SS electropolished 5cm 0.05L ambient – 200oC Optional Optional Optional Vacuum – 45psi* $2,599.00 slide mounted 0017-XXXX 0008-9278 0008-9279 0008-9278 Heater Jacket $1,099.00 0017-5548 Temp. Controller, 115v $1,199.00 11 Erie Street 0017-4804 Temp. Controller, 230v $1,399.00 Garﬁ eld, NJ 07026 USA 0008-9279 Spectrophotometer RFQ Tel: (973) 478-8944 Interface Fax: (973) 478-4201 0008-9280 Valve Kit $ 499.00 www.internationalcrystal.net *Window-dependent: KBr should be used only to 15psi. [email protected]

ICL — 12 Venus™ Glass Bodied Long Path Gas Cells

Gas Cells

Venus 6.4M

Gemini™ Venus™ Glass bodied long path gas cells are Venus™ cell configurations include ICL’s popular Ultra classic Hanst cells, first made commercially available Mini Cell which measures 3” x 3” x 8” (1 to 5 meters by Dr. Phil Hanst, who started producing them after fixed path length, 200cc volume), the Long Path Mini a long career at NASA and the EPA. Hanst cells are in Cell (variable path length to 5 meters, 0.5L volume) our bloodline at ICL, since we were Phil’s first outlet and fixed and variable path length cells ranging from for his product and Phil’s son Steve, who worked 4.8 to 8 meters. Heatable, laser aligned, base plate with Phil designing gas cells for 20 years, is now a mounted and other custom configurations of Venus™ major shareholder in ICL as well as its Executive Vice cells are available. Instrument specific interfaces are President. available for base plate mounted cell configurations. Venus™ cells are small to moderate volume long path Several common Venus™ cell configurations are gas cells designed for all purpose use in industrial and shown, but custom configurations are available upon research applications. The cell design has improved request. Prices do include KBr windows, but optional significantly over the years with such advances as windows can be selected from our transmission multilayer proprietary gold mirror coatings, improved window price list. RFQ for wedged windows to purgeable transfer optics, and instrument specific limit fringing a/k/a channeling. Cell mounting and base plate mountings. All Venus cells are fitted with other hardware, exclusive of the cell body material Swagelok® 1/4” or 1/8” tube fittings to which valves, and valves, is black anodized aluminum. Fittings 11 Erie Street hose barbs or compression fittings can be attached. and Valves are SS Swagelok®. All cell bodies are Garﬁ eld, NJ 07026 USA SS Swagelok® Valves are standard on the models borosilicate glass. Mirrors are GemGoldTM multi-layer Tel: (973) 478-8944 listed. gold coated, removable and easily serviced. See Fax: (973) 478-4201 www.internationalcrystal.net for more information. www.internationalcrystal.net [email protected]

13 — ICL Venus™ Glass Bodied Long Path Gas Cells

3 Meter Ultra Mini Cell (1/2 scale)

Part Temp. Spectrophotometer- Pressure Window Price Number Mounting Pathlength Vol. Temp. Range Controller Heater Specific Range Size w/ KBr windows

0008-9292 Slide Mounted 3.0 M 200cc ambient N/A N/A N/A vacuum-ambient 37.5 x 4 $4,199.00 0008-9293 Slide Mounted variable 0.5L ambient – 100oC Optional Optional N/A vacuum-ambient 25 x 4 $6,999.00 1 to 5M 0017-XXXX 0008-9278 0008-9294 Slide Mounted 4.8M 0.5L ambient – 100oC Optional Optional Available $5,399.00 0017-XXXX 0008-9278 Mounted 0008-9295 Slide Mounted 6.4M 0.5L ambient – 100oC Optional Optional Available vacuum-ambient 25 x 4 $5,999.00 0017-XXXX 0008-9278 Base Mounted 0008-9296 Slide Mounted variable 0.75L ambient – 100oC Optional Optional Available vacuum-ambient 25 x 4 $7,999.00 1.6 to 8M Base Mounted 0008-9278 Heater Jacket $1,099.00 0017-5548 Temp. Controller 115v $1,199.00 0017-4804 Temp. Controller 230v $1,399.00 0008-9279 Spectrophotometer RFQ Specific Interface 0008-9280 Replacement Valve Kit $ 499.00

ICL — 14 Mars™ Long Path Gas Cells

Gas Cells

Heated 3 Meter Mars™ Cell

For applications that demand high performance, durability, Mars™ cells feature modular designs with reliability, simplicity, dependability and serviceability, interchangeable and reconditionable components, Gemini™ Mars™ gas cells are the solution. Mars™ long enabling us to deliver gas cells that are both versatile path cells address the most demanding gas sampling and serviceable. Metal bodies and cell hardware can be requirements of industrial and field deployed FTIR and IR constructed from many materials. Cells from materials instrumentation with a robust series of metal bodied gas such as stainless steel (passivated or electro polished), cells with electro-polished stainless steel or electro-less pure nickel, nickel coated aluminum, black anodized nickel plated aluminum bodies that outperform any gas aluminum, and FEP or PTFE coated aluminum are all cell on the market. available and can be configured to user specifications. High stability A key factor ensuring the durability and serviceability Mars™ gas cells can be configured for high vacuum temperature controller of each Mars™ cell is the use of stainless steel exceeding 1 x 10-9 Torr and high pressure applications. www.internationalcrystal.net mirrors. These mirrors are extremely durable and Each Mars™ cell is individually helium leak tested or they can be reconditioned many times at modest hydrostatically tested and a helium leak test certificate cost, thereby extending the service life of each Mars™ can be supplied with any cell for $299.00 (Part No. cell for many years. All mirrors are coated with 0009-9281). See www.internationalcrystal.net for a our proprietary Gemgold™ multilayer gold coatings to sample vacuum test certification. insure the highest possible performance in demanding Mars Cells can be configured with heating jackets and environments. Stainless steel optics are inherently with user programmable temperature and pressure superior to diamond turned aluminum mirrors, from control and monitoring options. the standpoint of longevity and serviceability. While 316 stainless steel tends to resist the corrosive effects Several common Mars™ cell configurations are of reactive gases, aluminum tends to react with many shown, but custom configurations are available upon gases making aluminum subject to corrosion and request. Prices include KBr windows, but other therefore an inferior optical substrate. A more effective materials can be selected from our transmission low cost option to aluminum mirrors is gold coated window price list. RFQ for wedged windows to limit 11 Erie Street glass mirrors, which can be special ordered on Mars™ fringing. All Mars™ cells use 25 x 4mm windows. Cell Garﬁ eld, NJ 07026 USA at a discount to the prices of cells with stainless steel mounting and other hardware, exclusive of the cell Tel: (973) 478-8944 mirrors. body material and valves, is black anodized aluminum. Fax: (973) 478-4201 See www.internationalcrystal.net for more information. www.internationalcrystal.net [email protected]

15 — ICL Mars™ Long Path Gas Cells

Field-deployed Gas Analysis System

Part Cell Body Hardware Temp. Instrument Pressure Specific Price Number Material/Plating Pathlength Vol. Temp. Range Controller Heater Interface Range w/ KBr windows

0008-9282 Aluminum Electroless 2M 0.2L ambient – 200oC Optional Optional Optional Vacuum – 45psi* $9,999.00 Nickel 0017-XXXX 0008-7684 0008-9279 0008-9283 316 SS electropolished 2M 0.2L ambient – 200oC Optional Optional Optional Vacuum – 45psi* $11,999.00 0017-XXXX 0008-7684 0008-9279 0008-7681 Aluminum Electroless 3M 0.375L ambient – 200oC Optional Optional Optional Vacuum – 45psi* $11,999.00 Nickel 0017-XXXX 0008-7684 0008-9279 0008-9284 316 SS electropolished 3M 0.375L ambient – 200oC Optional Optional Optional Vacuum – 45psi* $13,999.00 0017-XXXX 0008-7684 0008-9279 0008-9285 316 SS electropolished 4.8M 0.5L ambient – 200oC Optional Optional Optional Vacuum – 45psi* $15,999.00 0017-XXXX 0008-7684 0008-9279 0008-7682 Aluminum Electroless 6.4M 0.75L ambient – 200oC Optional Optional Optional Vacuum – 45psi* $13,999.00 Nickel 0017-XXXX 0008-7684 0008-9279 0008-7679 316 SS electropolished 6.4M 0.75L ambient – 200oC Optional Optional Optional Vacuum – 45psi* $15,999.00 0017-XXXX 0008-7684 0008-9279 0008-9287 Aluminum Electroless 1.6 to 6.4M 0.75L ambient – 200oC Optional Optional Optional Vacuum – 45psi* $15,199.00 Nickel variable 0017-XXXX 0008-7684 0008-9279 0008-9288 316 SS electropolished 1.6 to 6.4M 0.75L ambient – 200oC Optional Optional Optional Vacuum – 45psi* $17,199.00 variable 0017-XXXX 0008-7684 0008-9279 0008-9289 Aluminum Electroless 10M 2L ambient – 200oC Optional Optional Optional Vacuum – 45psi* $14,999.00 Nickel 0017-XXXX 0008-7684 0008-9279 0008-9290 316 SS electropolished 10M 2L ambient – 200oC Optional Optional Optional Vacuum – 45psi* $16999.00 0017-XXXX 0008-7684 0008-9279 0008-9291 316 SS electropolished 12 to 48M 8L ambient – 200oC Optional Optional Optional Vacuum – 45psi* $23,999.00 variable 0017-XXXX 0008-7684 0008-9279 0008-7684 Heater Jacket $ 1,699.00 0017-5548 Temp. Controller 115v $ 1,199.00 0017-4804 Temp. Controller 230v $ 1,399.00 0008-9279 Spectrophotometer Specific RFQ Interface 0008-9280 Valve Kit $ 499.00 Specify spectrophotometer manufacturer and model when ordering. *Window-dependent: KBr should be used only to 15psi.

ICL — 16 Earth™ and Saturn™ Glass Bodied Long Path Gas Cells

Gas Cells

632nm Laser alignment footprint on Saturn™ cell mirrors

Features of Saturn 50L/200V

Gemini™ Earth™ glass bodied long path gas cells are, like Venus™ cells, classic Hanst cells, but with larger volumes and longer path lengths. Pathlengths range from 10 to 20 meters and volumes range from 2 to 8 liters. For applications requiring ultra long path lengths we offer our Saturn™ series multi-pass gas cells that range from 50 to 200 meters. These cells employ an innovative advancement in White cell configuration that effectively triples the operational range of the cell within a moderate size cell volume, thereby providing path lengths in excess of 100 meters that still produce strong signal throughput to enable part per billion (ppb) trace level detection sensitivity in ambient conditions and when sampling gas mixtures. The following figures show excellent signal to noise performance at 0.5cm-1 resolution in a 160 meter path length cell in a few minutes of elapsed observation time. Several typical Earth™ and Saturn™ cell configurations are shown, but custom configurations are available All Earth and Saturn cells feature SS Swagelok® upon request. Prices do include KBr windows, valves, multilayer gold coated mirrors, borosilicate but optional windows can be selected from our glass bodies, transfer optics and base plate transmission window price list. RFQ for wedged configurations to fit most spectrophotometers, and windows to limit fringing a/k/a channeling. Cell black anodized aluminum hardware. Earth™ cells mounting and other hardware, exclusive of the use 1/4” SS flow tubes and Swagelok® connections cell body material and valves, is black anodized and Saturn cells use 3/8” SS flow tubes and aluminum. Fittings and Valves are SS Swagelok®. 11 Erie Street Swagelok® connections. All variable path length All cell bodies are borosilicate glass. Mirrors Garﬁ eld, NJ 07026 USA cells incorporate a laser alignment device with are removable and easily serviced. See www. Tel: (973) 478-8944 a 6 volt DC power supply for path length verification Fax: (973) 478-4201 internationalcrystal.net for more information. based on the number of passes made through www.internationalcrystal.net the cell. [email protected]

17 — ICL Earth™ and Saturn™ Glass Bodied Long Path Gas Cells

A. Swagelok and Nupro Valves and Fittings B. Valve and Fitting Bulkhead C. Precision Aligned Objective Mirror Pair D. “Cell Rack” E. Cell Body F. Field Mirror G. Windows Endplate H. Window Retaining Rings I. Transfer Optics Box J. Base Plate

Part Temp. Laser Pressure Window Price Number Cell Pathlength Vol. Temp. Range Controller Heater Alignment Range Size w/ KBr windows

0008-9298 Earth 10M 2L ambient – 100oC Optional Optional vacuum-ambient 25 x 4 $ 8,499.00 0017-XXXX 0008-7684 0008-9299 Earth variable 2L ambient – 100oC Optional Optional Yes vacuum-ambient 25 x 4 $10,999.00 1 to 10M 0017-XXXX 0008-7684 0008-9300 Earth 20M 8L ambient – 100oC Optional Optional 25 x 4 $10,999.00 0017-XXXX 0008-7684 0008-9301 Earth variable 8L ambient – 100oC Optional Optional Yes vacuum-ambient 25 x 4 $17,999.00 2 to 30M 0017-XXXX 0008-7684 0008-9302 Saturn variable 18L ambient Yes vacuum-ambient 37.5 x 4 $21,999.00 8 to 80M 0008-9303 Saturn variable 25L ambient Yes vacuum-ambient 37.5 x 4 $23,999.00 10 to 100M 0008-9304 Saturn variable 50L ambient Yes vacuum-ambient 37.5 x 4 $28,999.00 20 to 200M 0008-7684 Heater Jacket $ 1,699.00 0017-5548 Temp. Controller 115v $ 1,199.00 0017-4804 Temp. Controller 230v $ 1,399.00 0008-9279 Spectrophotometer specific RFQ Interface 0008-9280 Replacement Valve Kit $ 499.00

ICL — 18 Solid Sampling & KBr Presses

Presses Quick Press KBr Pellet Kit & Port-A-Press™ KBr Pellet Kit

Little Press™ KBr Pellet Die Kit

ICL’s Port-A-Press™ and QuickPress are the most produce 16,000 lbs/in2 of pressure on the die set. economical, full-scale, KBr pellet presses on the This is the equivalent of 8 tons of pressure and market, and each produces pellets that are as forms a very clear pellet. transparent as those made with a 12 ton hydraulic The Quick Press is a hand press for making ™ press. The Port-A-Press uses a torque wrench transparent KBr pellets (discs) with diameters to permit the user to apply the same amount of of 7mm, 4mm or 2mm. The Quick Press uses pressure from pellet to pellet thereby facilitating the principle of toggle action to apply very high reproducibility of results. The square frame of the pressure with minimal force. The KBr pellet is ™ Port-A-Press can either be inserted in a bench formed using only the pressure of a firm handshake mounted vise or in the channel shaped holder applied steadily to the handle.The anvils of the provided with the press (shown in photo) which can be 7mm die sets are hardened with optically polished mounted to a work bench. The torque wrench easily Evacuable Little Press™ faces and use aerospace grade of nickel based generates 20 foot pounds of torque without the alloy. The die sets are interchangeable for both the use of excessive strength, which is sufficient to Port-A-Press™ and the Quick Press.

Part No. Description Price 0012-188 KBr Port-A- Press™ Kit, complete with 7mm die set, $649.00 torque wrench, channel holder and pellet press 0012-189 Die Set—7mm $157.00 0012-191 Die Set—4mm $179.00 0012-190 Die Set—2mm $179.00 0012-4706 10 pack of 7mm collars/KBr pellet mounts $419.00 0012-4607 Sample Holder to mount collars containing pellets $132.00 in spectrophotometer 0012-4586 KBr Quick Press Kit, complete with 7mm die set and holder $849.00 0012-4977 KBr Quick Press Handle Only w/o Die Set $699.00 0012-193 Little-Press™ Kit, including press body, two type 316 stainless $129.00 steel bolt style anvils and sample holder 0012-6680 Evacuable Little-Press™ Kit, same as 0012-193 but evacuable $183.00 11 Erie Street 0012-624 Assortment of ten Little-Press bodies (Nuts) with $569.00 Garﬁ eld, NJ 07026 USA twenty bolt style 316SS anvils Tel: (973) 478-8944 Fax: (973) 478-4201 0009-489 35mm OD Agate Mortar & Pestle (See page 27 for other sizes) $109.00 www.internationalcrystal.net [email protected]

19 — ICL Solid Sampling & KBr Presses

Presses

E-Z™ Quick Table Top KBr Pellet Press KBr powder & random cuttings See page 26

The E-Z™ Quick Table Top Press operates on then a hand press, and pushing a small lever the same toggle action principle as our Quick ejects the die set. There is a dial indicator to Press. By mounting the press vertically and enable reproduction of force settings from pellet providing a table top mounting platform, we to pellet. The press is constructed from Stainless have made it easier to compress a KBr pellet Steel, chrome plated steel and anodized Quick Press and easier to open the press and remove the aluminum for long corrosion-free service. The See page 19 pellet. Vertical mounting enables the use of body E-Z™ Quick Press uses the same 7mm, 4mm and weight and shoulder muscles, so the E-Z™ Quick 2mm die sets that are used in ICL’s Quick Press requires minimal strength to operate. When the and Port-A-Press™. base is attached to a bench it is easier to open

Part No. Description Price 0012-8076 E-Z™ Quick Table Top Press, w/o die set $1299.00 0012-8211 E-Z™ Quick Table Top Press, w/ 7mm die set $1399.00 0012-8212 E-Z™ Quick Table Top Press, w/ 2mm,4mm and 7mm die sets $1599.00 0012-189 7mm die set $157.00 0012-191 Die Set - 4mm $179.00 0012-190 Die Set - 2mm $179.00 0012-4706 10 Pack of 7mm collars/KBr pellet mounts $419.00 0012-6678 20 Pack of 7mm collars/KBr pellet mounts $649.00 0012-6679 30 Pack of 7mm collars/KBr pellet mounts $749.00 0012-4607 Sample Holder to mount collars containing pellets in 2”x3” slide $132.00 mount of spectrophotometer 0011-8966 Premium Grade FTIR SpectroGrade™ KBr Powder, 100 grams $99.00 0011-4541 KBr XL Ultra Pure SpectroGrade™ Powder 99.999% pure, 100 grams $150.00 0009-489 35mm OD Agate Mortar & Pestle $109.00

11 Erie Street Garﬁ eld, NJ 07026 USA Tel: (973) 478-8944 Fax: (973) 478-4201 www.internationalcrystal.net [email protected]

ICL — 20 Solid Sampling & KBr Presses

E-Z Press™ 12, 15, 20, 30 & 40 Presses Ton Hydraulic Presses U.S. Patents No. 5,701,814 & 5,787,564

12,15 & 20 Ton 30 & 40 Ton E-Z Press™ HIgh Profile E-Z Press™

KBr powder & random cuttings See page 26

ICL’s new patented E-Z Press™ hydraulic lab presses stainless steel filling disc to flatten the platen. feature a unique lightweight ergonomic design. All The bottom platen of the 12 ton E-Z Press™ E-Z Press™ models weigh less than 155 pounds automatically centers ICL’s 13mm Macro-Micro due to ICL’s patented unibody construction. The 12 die. The bottom platen of the 15 and 20 ton E-Z ton E-Z Press™ weighs a mere 51 pounds! The Press™ has a 4” diameter depression and optional E-Z Press™ will handle a variety of lab applications, donut shaped inserts are available to automatically including pressing KBr pellets for FTIR spectroscopy center ICL’s 13mm, 20mm, 32mm, 35mm and and briquetting samples for XRF spectroscopy. 40mm die sets. Optional extra long handles are Ports in the walls of the press frame allow access also available for all presses for extra leverage. for vacuum lines and electrical cords, enabling Features use of the press with evacuable dies and heated • Built in Polycarbonate Safety Shields platens. The 15 and 20 ton E-Z Press™ can also • Adjustable Overhead Lead Screw Agate mortars & pestles be used for making thin films with ICL’s Precision See page 27 Thickness Film Maker. • Access Ports for Vacuum and Electrical Lines All E-Z Presses™ feature built in polycarbonate • Lightweight safety shields with solid brass hardware. There • Unibody Construction are die centering depressions in the round • Ergonomic Design bottom platens. Each press comes with a standard • Automatic Die Centering

Part No. Description Price 0012-5859 12 ton E-Z Press™, with safety shields $2299.00 shipping weight approx. 57 pounds, CE marked 0012-7418 15 ton E-Z Press™, with safety shields $2549.00 shipping weight approx. 90 pounds, CE marked 0012-6306 20 ton E-Z Press™, with safety shields $2599.00 shipping weight approx. 90 pounds, CE marked 0012-4608 Precision Thickness Film Maker with 15, 25, 50 100, 250 & 500 $3499.00 micron spacers, cooling jacket and foil inserts 0012-5908 KBr Pellet Kit with 13mm die set (0012-2477) & $2698.00 12 ton E-Z Press™ (0012-5859) 0012-6549 30 ton E-Z Press™, with safety shields, high profile with $5199.00 8 1/4” daylight, weight 151 pounds, CE marked 0012-6630 40 ton E-Z Press™, with safety shields, high profile with $5599.00 8 1/4” daylight, weight 153 pounds, CE marked 0012-2477 13mm KBr die set (See page 27) $469.00 0012-6633 32mm die set with 2 SS anvils $1649.00 11 Erie Street 0012-6664 Water cooled 4” dia. Heated Platens (See page 25) $3259.00 Garﬁ eld, NJ 07026 USA 0012-6636 Die Centering Disc with 3.65” (92.7mm) aperture and 4” OD, $69.00 Tel: (973) 478-8944 centers ICL 20 - 40mm die sets Fax: (973) 478-4201 www.internationalcrystal.net [email protected]

21 — ICL Solid Sampling & KBr Presses

Presses

1 & 2 Ton E-Z™ Presses

Intrinsic Dissolution Apparatus — see www.internationalcrystal.net

ICL’s 1 & 2 Ton E-Z™ Presses feature the enables application of very small increments same unibody construction and other features of force levels which can be reproduced with common to our E-Z™ Press line, but we have a high degree of precision from sample to redesigned these presses to maximize the sample and without pressure drops. The sensitivity of the press for exact reproducibility force is applied to the sealed cylinder by turning of applied force. Normally, hydraulic presses the lead screw assembly against the platen on use a pump to apply pressure to the piston of which the die is seated, similar to the manner the hydraulic cylinder. The hydraulic fluid pump that a wine press operates. Since the force found in standard press designs increases the levels are very low, very little effort is required pressure of the hydraulic fluid in spurts which to turn the lead screw. causes the force being applied by the press These presses are equipped with clamps which to jump in increments which are difficult to allow them to be anchored to any bench top and control with precision. In addition, there is easily moved to different locations within the some backflow of hydraulic fluid during the lab and they can also be bolted to a lab bench pumping process which amplifies the lack of using the fixtures provided with the press. When reproducibility of force levels. used with ICL’s intrinsic dissolution analysis dies Many applications for low pressure presses (see www.internationalcrystal.net), the dies are such as intrinsic ingredients dissolution analysis automatically centered in the press. The 1 and require the application of highly reproducible 2 Ton E-Z™ Press can also be used with ICL’s force levels, and 12 ton hydraulic presses are 2mm, 4mm and 7mm die sets and die centering inherently unsuited to these applications. By inserts are available for the smaller die sets. removing the pump and sealing the hydraulic cylinder, we have created a press which

Part No. Description Price 0012-7417 2 Ton E-Z™ Press with safety shields. Daylight opening 2.5”, $3109.00 Shipping weight approximately 60 pounds. 0012-7760 1 Ton E-Z™ Press with safety shields. Daylight opening 2.5”, $3099.00 Shipping weight approximately 60 pounds. 0012-7825 Intrinsic dissolution die sets with 6 dies and 6 flat bottom beakers $5899.00 0012-8092 Intrinsic dissolution die sets with 2 dies and 2 flat bottom beakers $3459.00 0012-8093 Die centering insert for 2mm, 4mm and 7mm die sets $103.00 0012-191 Die Set - 4mm $179.00

0012-189 Die Set - 7mm $157.00 11 Erie Street Garﬁ eld, NJ 07026 USA Tel: (973) 478-8944 Fax: (973) 478-4201 www.internationalcrystal.net [email protected]

ICL — 22 Solid Sampling & KBr Presses

Air-EZ™ 15, 20, 30 & 40 Ton Automated Presses Presses U.S. Patents No. 5,701,814 & 5,787,564

15 & 20 Ton 30 & 40 Ton AIR-EZ™ Press High Profile AIR-EZ™ Press

Precision Thickness Film Maker

The Air-EZ™ Press adds automation to the patented Air-EZ™ Presses feature built in polycarbonate unibody design that enables ICL to make the safety shields with polished brass hardware and E-Z Press™ so light and ergonomic. The press a die centering depression in the round stainless is driven by an elegant and quiet pneumatic steel bottom platen. The press comes with a motor that runs off of your lab’s compressed standard 4” diameter stainless steel filling disc to air supply or most commercially available air flatten the platen. Optional donut shaped inserts compressors. No physical effort whatsoever is are available to automatically center die sets with required. The press jacks up to its rated capacity a variety of base diameters. of 15, 20, 30 or 40 tons in a mere 5 seconds. Features Ports in the walls of the press frame allow access for vacuum lines and electrical cords to the area • Automated – propelled by lab compressed air between the platens, which enables use of the • No strength required press with evacuable dies or heated platens. The • Lightweight Air-EZ™ Press is suitable for many lab applications, • Built-in Polycarbonate Safety Shields Pellet and • Small Footprint Briquetting Die Sets including KBr pellets and XRF briquettes. It has a small footprint and weighs between 130 pounds • Ergonomic Design See page 27 and 155 pounds. If you dread pumping up a • Unibody Construction manual press or crave lab space, this is the • Access Ports for Vacuum and Electrical Lines solution. The press is available with heated • Adjustable Overhead Lead Screw platens and our PrecisionThickness Film Maker as • CE Marked a Film Maker Kit.

Part No. Description Price 0012-7419 15 ton Air-EZ™ Press, with safety shields, shipping weight $3999.00 approx. 130 pounds, requires 100–115 psi, 7cfm, compressed air supply 0012-6486 20 ton Air-EZ™ Press, with safety shields, shipping weight $4179.00 approx. 130 pounds, requires 100–115 psi, 7cfm, compressed air supply 0012-4608 Precision Thickness Film Maker with 15, 25, 50 100, 250 & 500 $3499.00 micron spacers, cooling jacket and foil inserts 0012-6906 KBr Pellet Kit with 13mm die set (0012-2477) & 20 ton Air-EZ™ $4549.00 0012-2477 13mm KBr die set (See page 27) $469.00 0012-6633 32mm die set (See page 27) $1649.00 0012-6625 30 ton Air-EZ™, with safety shields, high profile with 8 1/4” daylight, $6299.00 weight approx. 152 pounds, CE marked 0012-6628 40 ton Air-EZ™, with safety shields, high profile with 8 1/4” daylight, $6599.00 weight approx. 155 pounds, CE marked

11 Erie Street 0012-6664 Water cooled 4” dia. Heated Platens (See page 25) $3149.00 Garﬁ eld, NJ 07026 USA Tel: (973) 478-8944 Fax: (973) 478-4201 www.internationalcrystal.net [email protected]

23 — ICL Solid Sampling & KBr Presses

Presses

Precision Thickness Film Maker & Thin Film Making Kits For Polymers

Heated platens See page 25

The ICL Precision Thickness Film Maker is sample to sample using hardened steel spacers available with several film making kits and as a stand to separate the two (2) mirror finish optically alone accessory for use with other lab presses. polished surfaces of the special anvils. The It is designed to hot press polymer films to precise entire assembly and the sample are placed thicknesses of 15, 25, 50, 100, 250 & 500 microns. between heated platens, heated to close to the It can be used in conjunction with either ICL’s 6” softening point and pressed with a hydraulic x 6” thermostat controlled heated platens (0012- press to form the film. By using matte finished 4612; see www.internationalcrystal.net) or the foil inserts between the anvils, interference temperature controlled, water cooled heated fringes can be avoided. Excess sample runs off platens with digital temperature controller (0012- into a trough to prevent interference with the 6664). The Precision Thickness Film Maker formation of the film. A water cooled chamber and the heated platens can be combined is provided into which the entire assembly with as complete kits with the 20 ton E-Z Press™, the film can be inserted for cooling after the film the 20 ton Air-EZ™ and the 12 ton Mini “C” has been pressed. Column press. For those making films from soluble polymers, The Precision Thickness Film Maker produces we urge you to take a look at the Roto-Film™ Mirror Finish thin films which are highly reproducible from (see page 25). Polished Plates

Part No. Description Price* 0012-4608 Precision Thickness Film Maker with 15, 25, 50, 100, 250 & 500 micron spacers, cooling $3499.00 jacket and 200 foil inserts 0012-4611 Replacement foil discs, pk/200 $269.00 0009-610 Magnetic Film Holder for mounting films in a spectrophotometer $89.00 0012-4609 Replacement Polished Top Platen $829.00 0012-4610 Replacement Polished Bottom Platen $829.00 0012-8486 Mirror Finish Polished 4” dia. 316 SS plates for making polymer films, threaded for optional $1099.00 handle with drilled thermocouple port, set of 2 0012-8803 PTFE 4” Diameter Platens for quick release of thin films made with heated platens; $429.00 set of 2 with matte finish for diminished fringing. 3/8” thick. 0012-8806 PTFE 30mm Diameter Platens for quick release of thin films made with heated platens; $119.00 pack of 4 with matte finish for diminished fringing. 1/8” thick. 0012-6664 Heated Platens, 4” dia. water cooled aluminum with digital PID temperature controller $3259.00 0012-6631 Film Maker Kit, with film maker (0012-4608) 20 ton E-Z press™ (0012-6306), digital $8599.00 temperature controller and water cooled 4” dia. aluminum heated platens (0012-6664) 0012-6681 Auto Film Maker Kit, with film maker (0012-4608) 20 ton Air E-Z™ press (0012-6486), $9399.00 11 Erie Street digital temperature controller and water cooled 4” dia. aluminum heated platens (0012-6664) Garﬁ eld, NJ 07026 USA Tel: (973) 478-8944 ™ 0014-6031 Roto-Film Film Maker (See page 25) $4999.00 Fax: (973) 478-4201 www.internationalcrystal.net [email protected]

ICL — 24 Solid Sampling & KBr Presses

Heated Platens Presses with Temperature Controller

The water cooled heated platens have a 4” 20 ton Air-EZ™ and is available as part of polymer (100mm) diameter aluminum pressing surface film maker kits with those presses (0012-6631 and that will heat a sample from ambient to 400°C 0012-6681), and the Precision Thickness Film Maker in less than 15 minutes. The heated platens (0012-4608). The heated platens can also be used are controlled by a stable (±1°C) CE marked with ICL’s 2 ton High Profile E-Z Press™ (0012-8393) digital PID temperature controller. The integral and the 5000 pound load cell E-Z Press™ (0012- water cooling facility reduces cooling times. A 8379). When ordering for use with an existing ICL removable thermocouple monitors temperature Press, order a special lead screw assembly (0012- close to the surface of the platens. This accessory 6665) for raising and lowering the top platen. is compatible with ICL’s 20 ton E-Z Press™ and

Part No. Description Price 0012-6664 Water Cooled 4” dia. Heated Platens with CE marked Digital Temperature $3259.00 Precision Thickness film Controller, (Specify 120 v, 60Hz; or 220v, 50Hz, CE marked, European maker for polymers RoHS Power Cord) See page 24 0012-6665 Lead Screw assembly for attaching the heated platens (0012-6664) to the $429.00 lead screw of an ICL 20 ton E-Z Press™ or an ICL 20 ton Air-EZ™ lab press for raising and lowering the top platen with the hand wheel 0012-8486 Mirror finish polished 4” dia. 316SS plates for making polymer films, $1099.00 threaded for optional handle with drilled thermocouple port, set of 2 (See photo on page 24) 0012-8803 PTFE 4” Diameter Platens for quick release of thin films made with heated $429.00 platens; set of 2 with matte finish for diminished fringing. 3/8” thick.

Roto-Film™ Rotational Casting™ Polymer Film Maker

For making thin films from polymers that can reproduce cycle time, rotation speed and ramp up be dissolved into solutions, the Roto-Film™ is an and ramp down from run to run. Heated Platens with excellent alternative. Films are spin cast on a Films cast by rotational casting on KBr windows 20 ton E-Z Press™ ® rapidly turning polished platen, Real Crystal IR or Real Crystal® IR Cards are free of interference Cards or on a KBr window. The film is complete fringes. Rotational casting produces films with radial within 60 seconds. If the film is cast on a KBr symmetry, which means that the film molecules window, the window is simply mounted in a radiate from a central point like spokes on a ™ spectrophotometer for analysis. The Roto-Film wheel rather than exhibiting the monodirectional is also designed to allow films to be cast on orientation typical of extruded films. Extruded films standard aluminum weighing dishes, which are will exhibit different absorbance peak intensities ™ disposable. The Roto-Film produces films which depending upon how the film is oriented when are extraordinarily consistent from film to film. it is placed in a spectrophotometer, but radially The accessory employs a programmable positive symmetric films cast on the Roto-Film™ will exhibit feedback micro-processor controlled motion the same peak intensities regardless of orientation. controller and a programmable timer to precisely

Part No. Description Price 0014-6031 Roto-Film™ film maker with disposable film casting platens, $4999.00 crystal casting platen, digital microprocessor motion controller, 11 Erie Street programmable cycle timer, 110 v, 60Hz Garﬁ eld, NJ 07026 USA 0014-6909 Roto-Film™ for use in countries with 220v, 50 Hz power, same as above $5599.00 Tel: (973) 478-8944 unit with CE marked transformer & country specific power cord & plug set Fax: (973) 478-4201 0014-6273 Concave platen $429.00 www.internationalcrystal.net 0014-6276 Microscope slide platen $499.00 [email protected] 0014-7451 Real Crystal® IR Card platen $499.00

25 — ICL Chemicals, Solvents & Random Cuttings

Chemicals & Solvents Random Cuttings & Spectroscopic Powders

KBr powder is graded solely by purity standards splitter grade material and is defined as material that are relevant to infrared spectroscopy. In the that does not have any absorbance peaks in industry, the highest specification for transmis- excess of 1.5%. FTIR Premium SpectroGrade™ sion optics is beam splitter grade material which is the equivalent of beam splitter grade material, is generally specified by FTIR spectrophotometer and it is made from a blend of KBr crystal boules OEMs as material having absorption bands due to in which peaks range from 0.9% to 1.1%. XL impurities of less than 1% measured at 4 wave Ultrapure SpectroGrade™ is a blend of material resolution between 4400cm-1 and 450cm-1. The from rare boules that exhibit absorbance bands cut off for commercial grade KBr crystal optics under 0.8% and the impurity range goes down to Fluorolube® and Nujol® at ICL is material having absorption bands due to 0.2%. Please call ICL for current availability. for mull samples impurities of less than 2% at 4 cm-1 resolution. KBr and KCl sold as random cuttings can be Most of the KBr now produced by ICL has absorp- ground finely immediately prior to being mixed tion bands due to impurities of less than 1.5% at with the sample for either diffuse reflection 4cm-1 resolution. Accordingly, lower grade KBr or transmission pellets. Random cuttings powder may not be available. ground into powder a short time before being FTIR Grade SpectroGrade™ KBr powder is made mixed with a sample will contain less water than from KBr crystal boules that are not quite beam pre-made powders.

Part No. Description Price 0011-5078 XL Ultra Pure SpectroGrade™ KBr Powder 99.999% pure 25gms $123.00 0011-4541 XL Ultra Pure Spectrograde™ KBr Powder 100gms $150.00 0011-8966 Premium Grade FTIR SpectroGrade™ KBr Powder 100gms $99.00 0011-8967 Premium Grade FTIR SpectroGrade™ KBr Powder 25gms $79.00 Econo cards 0002-2498 KBr Random Cuttings - one pound $369.00 for KBr pellets 0002-2499 KCI Random Cuttings - one pound $279.00 0002-4539 KBr Random Cuttings - 100 grams $115.00 0002-4538 KCI Random Cuttings - 100 grams $101.00

Paper Inserts, Econo Cards & Magnetic Pellet Holders Part No. Description Price 0009-4450 13mm Magnetic pellet holder holds 13mm diameter pellets $94.00 & pellets in paper inserts 0012-2478 Econo Cards, 9.5mm aperture, for mounting 13mm pellets $93.00 and micro pellets pressed into paper inserts, fits standard 3” x 2” (76.2mm x 50.8mm) spectrophotometer slide mount (1pk/100) 0012-6903 Econo Cards, 19mm aperture (1pk/100) $93.00 0012-2479 Paper inserts for 13mm die set 1.5mm dia hole (1 pk/200) $159.00 0012-2480 Paper inserts for 13mm die set 3.0mm dia hole (1pk/200) $159.00 0012-2481 Paper inserts for 13mm die set 5.0mm dia hole (1pk/200) $109.00 0012-2482 Paper inserts for 13mm die set 11.0mm dia hole (1pk/200) $109.00 0012-2483 Paper inserts for 13mm die set 1.5 x 9mm hole (1pk/200) $119.00

Fluorolube® & Nujol® 11 Erie Street Garﬁ eld, NJ 07026 USA Part No. Description Price Tel: (973) 478-8944 0011-2474 Fluorolube® 30ml $79.00 Fax: (973) 478-4201 www.internationalcrystal.net ® 0011-2475 Nujol 60ml $33.00 [email protected]

ICL — 26 Solid Sampling & KBr Presses

Evacuable KBr 32mm Die Set Presses & Briquetting 13mm Pellet Dies Die Set

Hardened aerospace grade stainless steel is can be evacuated with a vacuum pump to reduce used to produce all of ICL’s die sets. The 3mm the moisture in the sample. 13mm and 20mm to 19mm dies are used primarily for KBr pellets dies are typically used with 12 to 20 ton presses, for transmission analysis by IR spectroscopy, while the larger size dies are used with 20 to 40 while the larger dies are most commonly used ton presses and are most commonly used for for producing briquettes for XRF spectroscopy. briquetting samples for XRF analysis. Water Jacketed Dies For The 13mm Macro-Micro die is chosen by most To enable preparation of the finest quality pellets Heating and Cooling spectroscopists for KBr pellets, and it is available and briquettes, anvils are optically polished to a with paper inserts with a variety of small aper- See mirror finish and are free from scratches or digs. All tures (1.5, 3, 5, & 11mm) that enable the user to die sets in the 13mm to 45mm size range are avail- www.internationalcrystal.net make micro-pellets with a 13mm die set and also able with optional extremely hard tungsten carbide provide a useful frame for mounting and storing polished anvils for use with abrasive samples. the pellets. Die sets with water jackets that allow heating and All ICL dies have an upper and lower stainless cooling of solid samples while under pressure are steel section for ease of disassembly and they now available in 20mm, 25mm, 32mm, 35mm and are sealed with viton seals. For ease of use, the 40mm. Please visit www.internationalcrystal.net weight was reduced in all die sets in the 10mm for more information. to 45mm range by adding an outer shield of alu- Features minum. This feature makes them much easier to • Aerospace Grade Hardened Stainless Steel handle than 2 piece dies made completely from stainless steel due to their lighter weight, but • Optically Polished Anvils without sacrificing strength or durability. The dies • Evacuable

Evacuable KBr & Briquetting Pellet Dies Part No. Description Price 0012-6646 3mm KBr die set $949.00 0012-6647 5mm KBr die set $949.00 Agate Mortar 0012-6648 10mm KBr die set $849.00 & Pestle Sets 0012-2477 13mm KBr die set with 2 SS anvils & assorted $469.00 paper inserts for micro samples 0012-6649 16mm KBr die Set with 2 SS anvils $869.00 0012-8777 19mm die Set with 2 SS anvils $899.00 0012-5223 20mm die set with 2 SS anvils $1551.00 0012-6653 25mm die set with 2 SS anvils $1599.00 0012-6633 32mm die set with 2 SS anvils $1649.00 0012-6634 35mm die set with 2 SS anvils $1999.00 0012-6635 40mm die set with 2 SS anvils $2149.00 0012-8990 45mm die set with 2 SS anvils $2699.00 Agate Mortars And Pestles ICL’s agate mortars and pestles are the ideal tool for grinding a matrix of a solid sample with KBr powder in preparation for making a transparent pellet free from spurious absorption peaks. Pure agate is non-absorbing in an infrared spectrophotometer. Mortar and pestle sets are available in custom sizes ranging from 25mm to 200mm diameter as well as standard 35mm, 50mm, 65mm and 95mm diameters.

11 Erie Street Part No. Description Price Garﬁ eld, NJ 07026 USA Tel: (973) 478-8944 0009-489 35mm OD Agate Mortar & Pestle $109.00 Fax: (973) 478-4201 0009-7339 50mm OD Agate Mortar & Pestle $131.00 www.internationalcrystal.net 0009-501 65mm OD Agate Mortar & Pestle $153.00 [email protected] 0009-491 95mm OD Agate Mortar & Pestle $339.00

27 — ICL Laboratory Grinding Mills

Wig-L-Bug Grinding Mill Grinding Mills

Digital Wig-L-Bug

The Wig-L-Bug is an invaluable accessory for from sample to sample by replicating the cycle the spectroscopy laboratory. It is ideal for time, which is controlled by a 60 second 13mm KBr die set mixing and pulverizing samples for use in a timer. Most samples can be prepared in 10 See page 27 KBr matrix that will be pressed into a pellet seconds. Agate, metal and plastic sample vials and for mulling and diffuse reflection (DRIFT) are available. techniques. Sample preparation is reproducible

Part No. Description Price 0013-2485 Wig-L-Bug™ grinding mill with vial adapter and 60 second timer $969.00 0013-7357 Digital Wig-L-Bug™, 120 v, 60 Hz with polymer vial and ball pestle $969.00

Wig-L-Bug Accessories* 0013-2487 Adapter for 1” x 1/2” diameter vials, 1.0ml capacity $97.00 0013-2489 Stainless Steel Vial (1” h. x 1/2” dia.) with stainless steel $109.00 ball pestle (1/4” dia) 0013-2495 Agate Vial Assembly comprised of a 2-part white Delrin® outer shell $429.00 and a 3-part inner liner consisting of an agate vial, agate cap and a 6mm ball pestle. Capacity of inner liner is 1ml. 0013-5506 Agate Ball Pestle 1/4” diameter $108.00 KBr powder & 0013-5531 PTFE Vial Assembly with Agate ball pestle (6mm dia) $309.00 random cuttings See page 26 0013-2488 Polystyrene Vial with polyethylene slip-on cap (1” h. x 1/2 dia.), pk/100 $97.00 0013-2490 Ball Pestle, polycarbonate, 3/8” dia., pk/100 $89.00 0013-2492 Adapter for 2” h. x 1/2” dia. vials (2.5 ml capacity) $109.00 0013-2494 Ball Pestle, polycarbonate, 1/8” dia, pk/100 $97.00 0013-8005 Wig-L-Bug Arm Assembly with Spoon Arms and Braces $97.00 0013-5022 Bearing Strap $151.00

2490 2487

2488 2489 2495 2492 4739 8005 11 Erie Street Garﬁ eld, NJ 07026 USA Tel: (973) 478-8944 * Most accessories listed above are not compatible with the Digital Wig-L-Bug. Fax: (973) 478-4201 See www.internationalcrystal.net for Digital Wig-L-Bug accessories. www.internationalcrystal.net [email protected]

ICL — 28 Calibration Films

ICL produces calibration films for IR Polystyrene and FTIR spectrophotometers that are Films Calibration certified to be traceable to NIST 1921b Standard Reference Material (SRM), Films European Pharmacopeia 2.2.24-1 (PhEur 2.2.24-1) and Japan Pharmacopeia 2.25 (PhJap 2.25). In addition, ICL produces polystyrene calibration films cast on KBr substrates, Boron doped KBr and calibration films of various thickness useful for ordinate calibrations. These calibration materials are described in detail at www.internationalcrystal.net. Summary descriptions of all available calibration materials appear below in the part number list.

Square Cuvette Holder Part No. Description Price See page 30 0009-2500 Polystyrene Test Film - 38 microns thick $33.00 0009-8181 Polystyrene Test Film - 76 microns thick $97.00 0009-8182 Pair of polystyrene calibration films of different thickness. One film is 38 microns and is $219.00 provided with certification of traceability to five (5) NIST 1921b frequencies. The second film is 76 microns and is provided without certification. Both films are mounted on 2” x 3” card stock holder with a 19mm aperture for mounting in the universal slide holder in all instruments. Includes instructions for two (2) film ordinate calibration and storage case. 0009-8487 Same as 0009-8182 but with PhEur 2.2.24 certification $219.00 0009-7676 NIST traceable Polystyrene Test film, certificate of traceability to five (5) NIST 1921b frequencies, $215.00 set of 2 films each mounted to 2” x 4” card stock holder 0009-7393 Pair of polystyrene films of different thickness, both with NIST traceability certification. $339.00 Kit also includes a pair of standard polystyrene films, but without NIST traceability certification. One NIST traceable film is mounted on 2” x 4” card stock, which enables mounting in the standard universal slide mount found in all spectrophotometers, and is the same thickness as an NIST 1921 standard film (38 microns). The second thinner NIST traceable film is cast on KBr and includes holder and mounting device. Kit includes certification of traceability to five (5) NIST 1921 frequencies, radial symmetry certification for film cast on KBr and storage cases for all films. 0009-7394 Pair of polystyrene calibration films of different thickness cast on KBr, radial symmetry $549.00 certification, summary of NIST standard 1921 with frequency locations, certification of traceability to five (5) NIST 1921 frequencies, instructions for two (2) film ordinate Cylindrical Cell calibration, slide mount holder. Kit also includes a pair of standard polystyrene films, Holders without NIST traceability certification, mounted on 2” x 4” card stock which enables mounting in the standard universal slide mount found in all spectrophotometers. See page 30 Storage case provided. 0009-7395 Single Boron doped KBr Crystal calibration standard with slide RFP mount holder and storage case. (U.S. Patent No. 6,594,008) 0009-7396 Pair of matched Boron doped KBr windows. RFP (U.S. Patent No. 6,594,008) 0009-8157 Polystyrene calibration film for PhEur 2.2.24 calibration of IR and FTIR instruments, certified to $149.00 7 wave numbers and certified as to absorption minima and maxima differentials at 2870 cm-1 and 2849.5cm-1 and at 1589 cm-1 and 1583 cm-1 0009-8158 Pair of PhEur 2.2.24 certified polystyrene calibration films, $229.00 same as 0009-8157 but with 2 certified films 0009-8559 Polystyrene Calibration film for PhJap 2.25 calibration of IR and FTIR instruments, $149.00 certified to 7 wave numbers, mounted on 2” x 4” card stock 0009-8558 Pair of PhJap 2.25 certified polystyrene calibration films, same as $227.00 0009-8559 but with 2 certified Films 0009-8560 Polystyrene calibration film, certificate of traceability to 7 NIST frequencies $173.00 11 Erie Street (wave numbers) and certified as to absorption minima and maxima differentials Garﬁ eld, NJ 07026 USA at 2870cm-1 and 2849.5cm-1 and 1589cm-1 and 1583cm-1 as required by PhEur 2.2.24 Tel: (973) 478-8944 0009-8448 Same as 0009-8560 but also certified to PhJap 2.25 $207.00 Fax: (973) 478-4201 0009-8437 Pair of films same as 0009-8448 $309.00 www.internationalcrystal.net [email protected]

29 — ICL UV-VIS, NEAR IR, RAMAN & FLUORIMETER CELLS CELL LIGHTPATH Q SILICA I SILICA QG FUSED G OPTICAL VOLUME TYPE in mm UV GRADE IR GRADE SILICA GLASS ml Standard Cell Type 1 1mm 0023Q-289 0023R-401 0023S-572 0023T-571 .4 Standard $107.00 $124.00 $99.00 RFP Cell 2mm 0023Q-413 0023R-353 N/A 0023T-2314 .7 Standard Cell $105.00 $123.00 RFP 5mm 0023Q-284 0023R-243 N/A 0023T-2315 1.7 $103.00 $114.00 $51.00 10mm 0023Q-236 0023R-355 N/A 0023T-256 3.5 $91.00 $99.00 $39.00 20mm 0023Q-2316 0023R-2317 N/A 0023T-2319 7.0 TYPE 1 $119.00 $123.00 $47.00 Cell with fitted PTFE cover. 30mm 0023Q-5010 0023R-7488 N/A 0023T-7490 10.5 Satin finish on two sides. $117.00 $121.00 $47.00 Lightpaths: 1, 2, 5, 10, 20, 40, 40mm 0023Q-273 0023R-2320 N/A 0023T-288 14.0 50 and 100 mm. TYPE 21 $147.00 $166.00 $62.00 Outside dimensions: Same as Type 1, but 45 mm high, 12.5 mm wide. 50mm 0023Q-412 0023R-429 N/A 0023T-2985 17.5 with tapered PTFE $172.00 $187.00 $94.00 stopper. Standard Cell 100mm 0023Q-440 0023R-545 0023S-2321 0023T-2322 35.0 Screw Cap $284.00 $331.00 $239.00 $139.00 Cylindrical Cell Type 1 SC 10mm 0023Q-7491 0023R-7492 N/A N/A 3.5 Screw Top $215.00 RFP Standard Cell

Type 3 10mm 0023Q-274 0023R-2327 0023S-2332 0023T-382 3.5 Fluorimeter $149.00 $159.00 $143.00 $69.00 Cell 20mm 0023Q-2324 0023R-2328 0023S-2333 0023T-2337 7.0 $167.00 $199.00 $143.00 $75.00 TYPE 1SC 40mm 0023Q-663 0023R-2329 N/A 0023T-2338 14.0 Same as Type 1 but with screw cap. $199.00 $239.00 $99.00 TYPE 32 Lightpath 10 mm only. 50mm 0023Q-7497 0023R-7498 N/A 0023T-7500 14.0 Cylindrical cell with one $239.00 $256.00 $115.00 PTFE stopper. Lightpaths: 2, 5, 10 and Standard Fluorimeter Type 9 5mm 0023Q-2339 0023R-2342 N/A 0023T-2348 .7 20mm.. Cell Semi Micro $131.00 $149.00 $63.00 Outside diameter: 22 mm. Cell 10mm 0023Q-301 0023R-566 0023S-1382 0023T-251 1.4 Use IR Grade for hydrocarbon analysis. $127.00 $149.00 RFP $61.00 20mm 0023Q-2340 0023R-2343 0023S-2346 0023T-2349 2.8 $153.00 $164.00 $114.00 $75.00 40mm 0023Q-2341 0023R-2344 0023S-2347 0023T-2350 5.6 Cylindrical Cell $189.00 $214.00 $149.00 $79.00 Type 21 1mm 0023Q-319 0023R-367 0023S-586 0023T-570 1.4 Standard $135.00 $145.00 $114.00 RFP TYPE 3 Cell 2mm 0023Q-579 0023R-368 N/A 0023T-2370 .7 Cell with fitted PTFE cover $133.00 $145.00 RFP for fluorimetry. All 4 sides 5mm 0023Q-349 0023R-2365 0023S-627 0023T-2371 1.7 and bottom polished. $138.00 $144.00 $105.00 $81.00 Lightpaths: 2, 5, 10, 20, 40 10mm 0023Q-261 0023R-414 N/A 0023T-307 3.5 and 50 mm. $129.00 $131.00 $79.00 Outside dimensions: 20mm 7.0 TYPE 34 45 mm high x 12.5 mm wide. 0023Q-2364 0023R-2366 0023S-2368 0023T-581 $137.00 $145.00 $122.00 $89.00 Cylindrical cell with two 40mm 0023Q-580 0023R-2367 0023S-2369 0023T-2372 14.0 PTFE stoppers. Semi-Micro Cell Lightpaths: 50 and 100 $159.00 $171.00 $134.00 $95.00 mm. 50mm 0023Q-7513 0023R-7514 0023T-7516 17 Outside diameter: 22 mm. $159.00 $169.00 N/A $95.00 Use IR Grade for Type 32 2mm 0023Q-452 0023R-454 N/A N/A .7 hydrocarbon analysis. Cylindrical $224.00 $239.00 Cell 5mm 0023Q-439 0023R-2409 0023S-2410 N/A 1.5 Cylindrical Cell $227.00 RFP RFP Screw Cap 10mm 0023Q-302 0023R-360 N/A 0023T-583 3.1 $144.00 $132.00 $85.00 20mm 0023Q-260 0023R-417 0023S-2411 0023T-541 6.3 TYPE 9 $154.00 $155.00 $129.00 $84.00 Semi-micro cell with fitted PTFE cover. Type 34 50mm 0023Q-331 0023R-281 0023S-356 0023T-557 15.7 Satin finish on two sides. Cylindrical $179.00 $177.00 $159.00 $97.00 Inside width 4mm. Cell 100mm 0023Q-292 0023R-461 0023S-409 0023T-530 31.4 Lightpaths: 5, 10, 20 and $189.00 $199.00 $169.00 $103.00 40 mm. Type 34 50mm 0023Q-7612 0023R-7613 0023S-7614 N/A 14.1 Outside Dimensions: TYPE 34 SC

45 mm high x 12.5 mm Screw Top $287.00 $303.00 $293.00 Cylindrical cell with wide. Cylindrical 100mm 0023Q-7616 0023R-7617 0023S-7618 N/A 28.2 screw caps. Adjustable Cuvette Cell $309.00 RFP RFP Lightpaths: 50 and 100 mm. Holder Outside-diameter: 22 mm. Use IR Grade for Part No. Description Price hydrocarbon analysis. 0023-503 Square Cuvette Holder — see photo on page 29 $149.00 0023-4607 Cylindrical Cell Holder (10mm) — see photo on page 29 $127.00 0023-2984 Cylindrical Cell Holder (50mm) — see photo on page 29 $129.00 0023-502 Cylindrical Cell Holder (100mm) — see photo on page 29 $124.00 0023-2466 Adjustable Cuvette Holder $274.00

ICL — 30 11 Erie Street, Garfield, N.J. 07026 Telephone: (973) 478-8944 • Fax: (973) 478-4201 www.internationalcrystal.net [email protected]

The following trademarks are used in this catalog: Fluorolube® is a registered trademark of Occidental Chemical Corporation Swagelok® is a registered trademark of Swagelok Company 3M® is a registered trademark of 3M Company Pyrex® is a registered trademark of Corning Incorporated Wig-L-Bug® is a registered trademark of Crescent Dental Manufacturing Company Viton® is a registered trademark of Dupont Performance Elastomers LLC

July 14 – 18, 2014 Infrared Spectroscopy I — Interpretation of Infrared and Raman Spectra www.ircourses.org