DOCSLIB.ORG

Surveying and Mapping Manual

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Surveying and Mapping Manual SURVEYING AND MAPPING MANUAL SUMMARY OF CONTENTS CHAPTER 1 GENERAL CHAPTER 2 GEODETIC SURVEYS CHAPTER 3 LAND SURVEYS CHAPTER 4 PHOTOGRAMMETRY CHAPTER 5 LOCATION SURVEYS CHAPTER 6 CONSTRUCTION SURVEYS CHAPTER 7 PROCUREMENT, MANAGEMENT AND MAINTENANCE OF EQUIPMENT CHAPTER 8 SAFETY AND TRAFFIC CONTROL FOREWORD The sophisticated surveying technology developed for the space programs opened the way to research and development on new surveying theory and practice. In 1971 the Minnesota Highway Department, now the Department of Transportation, engaged Professor Jesse E. Fant from the Department of Civil Engineering at the University of Minnesota, to assist the Department in the development of a “Modern Surveying System.” It was a unique and ambitious undertaking involving a parallel training and education program for 42 employees. The main goals were to implement major changes in surveying methods and standards; to conduct research in the use of modern surveying equipment; to develop automation techniques for department surveys; and to conduct an extensive training and education program for Central Office and District personnel. The program centered around four broad areas: control surveys, land surveys, plat preparation and research projects. The end result provided: A common language and method of operation established amount all surveying and mapping offices in the Department, a core of trained employees in each Department office to carry out these new methods, surveys which are highly accurate and reliable, and coordination of survey data into the process of Highway Design, Right of Way and Construction. This manual incorporates and sets forth accepted practices developed in the Surveying Program and the Interactive Graphics/Automated Drafting System. The manual will be kept current through a continuing program to keep Surveying and Mapping personnel up-to-date on the changes coming about because of research, new technology and the surveying organization of Mn/DOT. With deep appreciation the Mn/DOT staff acknowledges Jesse E. Fant and Mn/DOT District and Central Office personnel who have contributed to the development of a Modern Surveying System and to the contents of this Surveying and Mapping Manual. PREFACE The Surveying and Mapping Manual contains material that is informational and instructional, and that sets forth uniform guidelines and accepted practices to be used by Mn/DOT personnel performing Surveying and Mapping work. The manual is primarily designed for use at the Transportation Specialist level and above, and to provide uniformity of application statewide. While the manual was written for use by Mn/DOT personnel, other agencies may utilize the manual as deemed appropriate: however, Mn/DOT accepts no responsibility, legal or other, for the adequacy of the methods and procedures contained in this manual, when used outside of Mn/DOT. Revisions and supplements to this manual will be issued periodically to all holders of the manual. Users of the manual are invited to submit ideas for suggestions for change or improvements or errors to be corrected in specific chapters or portions thereof to the Surveying and Mapping Section, Office of Land Management, Transportation Building, St. Paul, Minnesota 55155. July 1, 2000 SURVEYING AND MAPPING MANUAL Index 1(1) CHAPTER 1 - GENERAL 1-1 INTRODUCTION 1-1.01 PURPOSE 1-1.02 SCOPE 1-2 SURVEYING AND MAPPING SECTION - OFFICE OF LAND MANAGEMENT 1-2.01 SURVEYING AND MAPPING SECTION FUNCTIONS 1-2.02 SURVEYING AND MAPPING SECTION ACTIVITIES 1-2.0201 Geodetic Unit 1-2.0202 Photogrammetric Unit 1-2.0203 Geographic Information and Mapping Unit 1-2.03 REQUESTS FOR SERVICES FROM THE SURVEYING AND MAPPING SECTION 1-3 DISTRICT SURVEYING AND MAPPING 1-3.01 DISTRICT SURVEYING AND MAPPING FUNCTIONS 1-3.02 DISTRICT SURVEYING AND MAPPING ACTIVITIES 1-3.03 WORK AUTHORITIES 1-4 SURVEYS GROUP ORGANIZATION 1-4.01 SURVEYS GROUP ADVISORY COMMITTEE 1-4.02 SURVEYS GROUP COMMITTEE STRUCTURE 1-4.0201 Equipment Committee 1-4.0202 Automation Committee 1-4.0203 Policy, Practice and Standards Committee 1-4.0204 Personnel and Training Committee July 1, 2000 SURVEYING AND MAPPING MANUAL 1-1(1) CHAPTER 1 - GENERAL 1-1 INTRODUCTION 1-1.01 PURPOSE The Minnesota Department of Transportation (Mn/DOT) Surveying and Mapping Manual provides an overview of the surveying and mapping functions in the department. This manual contains material that is of both an informational and instructional nature. Guidelines and procedures are spelled out in detail in the hope that greater uniformity and quality can be obtained in surveying and mapping related activities within Mn/DOT. The manual clarifies policies and procedures technical and professional surveying and mapping personnel use in their day to day work. Using these procedures should result in uniform surveying and mapping practices. The manual introduces procedures to work with survey equipment now being used throughout Mn/DOT. 1-1.02 SCOPE The manual is written for use at the Senior Highway Technician level or above. The manual contains definitions of common surveying and mapping terms used to communicate with colleagues and clients. The manual also references other Mn/DOT manuals and other references as necessary for understanding a topic. July 1, 2000 SURVEYING AND MAPPING MANUAL 1-2(1) 1-2 SURVEYING AND MAPPING SECTION - OFFICE OF LAND MANAGEMENT 1-2.01 SURVEYING AND MAPPING SECTION FUNCTIONS Develop and implement surveying and mapping policies, procedures and training. Test and research new surveying and mapping methods and equipment for Mn/DOT. Budget, purchase and integrate these new methods and equipment. Represent Mn/DOT with governmental agencies and professional and private organizations. Work with the District Survey Units to provide training to surveying and mapping personnel in applications of geodetic and photogrammetric surveys. Coordinate Mn/DOT surveying and mapping activities with each District Survey Engineer/Surveyor. Provide surveying and mapping and geographic information products and services as necessary for planning, design, construction and maintenance of the transportation system. 1-2.02 SURVEYING AND MAPPING SECTION ACTIVITIES 1-2.0201 Geodetic Unit The Geodetic Unit is responsible for the following activities: a. Research and test surveying methods and equipment and provide training. b. Perform second order geodetic control surveys to establish horizontal and vertical control monuments on transportation system projects. c. Schedule work, process data and maintain records for a monumented network of second order horizontal and vertical control, and photo control. d. Maintain the Geodetic Database. 1-2.0202 Photogrammetric Unit The Photogrammetric Unit performs the following services: a. Prepare consultant contracts for aerial photography, overload photogrammetric mapping and photographic laboratory services. b. Review and recommend aerial photography and mapping requests. c. Provide photogrammetric (planimetric, topographic and cross section) mapping and digital ortho photographs and mosaics. d. Maintain the library of aerial photography, quadrangle maps and statewide high altitude film positives. e. Sell Mn/DOT aerial photographs. July 1, 2000 SURVEYING AND MAPPING MANUAL 1-2(2) 1-2.0203 Geographic Information and Mapping Unit The Geographic Information and Mapping Unit provides the following services: a. Prepare and maintain current state, county and municipal road and street maps, railroad maps, and detailed corporate boundary information. b. Provide graphic services for planning reports and exhibits. c. Provide low-resolution base mapping in GIS, GPS, planning and programming applications. d. Maintain the Mn/DOT 1:24000 GIS Base Map. e. Provide special purpose maps of traffic volumes, multi-modal transportation systems, federal routes, district control sections and urban boundaries. 1-2.03 REQUESTS FOR SERVICES FROM THE SURVEYING AND MAPPING SECTION In order to avoid duplication of work and effort on a project, requests for surveying and mapping services should be channeled through the appropriate District Survey Office. The District Survey Engineer/Land Surveyor is responsible for their survey records and should be knowledgeable about past and present respective district surveying and mapping activities. July 1, 2000 SURVEYING AND MAPPING MANUAL 1-3(1) 1-3 DISTRICT SURVEYING AND MAPPING 1-3.01 DISTRICT SURVEYING AND MAPPING FUNCTIONS The district surveying and mapping functions to collect field data, map, stake and document construction projects. It also maintains records of survey data, provides land surveying and cooperates with other governmental agencies and private land surveyors and engineers in the exchange of survey information. 1-3.02 DISTRICT SURVEYS AND MAPPING ACTIVITIES Request aerial photography and/or mapping from the Surveying and Mapping Section. Establish third order horizontal and vertical control networks. Cooperate with Geodetic Unit in establishing second order horizontal and vertical control. Recover existing roadway alignment and compute new alignment where necessary. Collect complete location survey data on proposed construction projects. Collect complete bridge survey and hydraulics data for proposed bridge projects. Make field photo control survey as requested by Surveying and Mapping Section. Prepare maps of surveying information. Locate or reestablish land corners and file certificates on them. Cooperate with public and private land surveyors in locating, reestablishing, perpetuating and recording land corners.
Load more

Recommended publications
  • Roman Large-Scale Mapping in the Early Empire
    13 · Roman Large-Scale Mapping in the Early Empire o. A. w. DILKE We have already emphasized that in the period of the A further stimulus to large-scale surveying and map­ early empire1 the Greek contribution to the theory and ping practice in the early empire was given by the land practice of small-scale mapping, culminating in the work reforms undertaken by the Flavians. In particular, a new of Ptolemy, largely overshadowed that of Rome. A dif­ outlook both on administration and on cartography ferent view must be taken of the history of large-scale came with the accession of Vespasian (T. Flavius Ves­ mapping. Here we can trace an analogous culmination pasianus, emperor A.D. 69-79). Born in the hilly country of the Roman bent for practical cartography. The foun­ north of Reate (Rieti), a man of varied and successful dations for a land surveying profession, as already noted, military experience, including the conquest of southern had been laid in the reign of Augustus. Its expansion Britain, he overcame his rivals in the fierce civil wars of had been occasioned by the vast program of colonization A.D. 69. The treasury had been depleted under Nero, carried out by the triumvirs and then by Augustus him­ and Vespasian was anxious to build up its assets. Fron­ self after the civil wars. Hyginus Gromaticus, author of tinus, who was a prominent senator throughout the Fla­ a surveying treatise in the Corpus Agrimensorum, tells vian period (A.D. 69-96), stresses the enrichment of the us that Augustus ordered that the coordinates of surveys treasury by selling to colonies lands known as subseciva.
    [Show full text]
  • Geodetic Position Computations
    GEODETIC POSITION COMPUTATIONS E. J. KRAKIWSKY D. B. THOMSON February 1974 TECHNICALLECTURE NOTES REPORT NO.NO. 21739 PREFACE In order to make our extensive series of lecture notes more readily available, we have scanned the old master copies and produced electronic versions in Portable Document Format. The quality of the images varies depending on the quality of the originals. The images have not been converted to searchable text. GEODETIC POSITION COMPUTATIONS E.J. Krakiwsky D.B. Thomson Department of Geodesy and Geomatics Engineering University of New Brunswick P.O. Box 4400 Fredericton. N .B. Canada E3B5A3 February 197 4 Latest Reprinting December 1995 PREFACE The purpose of these notes is to give the theory and use of some methods of computing the geodetic positions of points on a reference ellipsoid and on the terrain. Justification for the first three sections o{ these lecture notes, which are concerned with the classical problem of "cCDputation of geodetic positions on the surface of an ellipsoid" is not easy to come by. It can onl.y be stated that the attempt has been to produce a self contained package , cont8.i.ning the complete development of same representative methods that exist in the literature. The last section is an introduction to three dimensional computation methods , and is offered as an alternative to the classical approach. Several problems, and their respective solutions, are presented. The approach t~en herein is to perform complete derivations, thus stqing awrq f'rcm the practice of giving a list of for11111lae to use in the solution of' a problem.
    [Show full text]
  • Download the Surveying and Mapping Minor Form
    The Ohio State University College of Engineering Department of Civil, Environmental and Geodetic Engineering Surveying and Mapping Minor (SURVMAP-MN) Department of Civil, Environmental and Geodetic Engineering Details for the required minor courses are listed below. Many 470 Hitchcock Hall, 2070 Neil Avenue Columbus, OH 43210 of the courses are only offered once per year. http://ceg.ohio-state.edu Surveying and Mapping Minor Program Guidelines Surveying is a crucial part of land development. Professional Surveyors must have a Bachelor of Science in Civil Required for graduation: No Engineering or Surveying and Mapping, and often work Credit hours required: A minimum of 19 credit hours is closely with architects and builders to produce precise required to complete the Surveying and Mapping minor. surveys and maps of surface features of the earth. Surveyors Transfer and EM credit hours allowed: No more than 6 (six) of can choose from many specialties and get involved at many the credit hours required for the minor can come from stages of a project. Students who pursue a Surveying and transfer or EM credit. Mapping minor will gain an understanding of global Overlap with the major: positioning; analyzing spatial data; digital map production • The minor must be in a different subject that the major and electronic data collection; survey software applications, • The minor must contain a minimum of 12 hours boundary surveying and construction layout techniques. distinct from the major and/or additional Students interested in pursuing a career in professional land minor(s). surveying should consider completing the Surveying and Civil Engineering Majors: The following courses will count as Mapping minor.
    [Show full text]
  • The History of Cartography, Volume Six: Cartography in the Twentieth Century
    The AAG Review of Books ISSN: (Print) 2325-548X (Online) Journal homepage: http://www.tandfonline.com/loi/rrob20 The History of Cartography, Volume Six: Cartography in the Twentieth Century Jörn Seemann To cite this article: Jörn Seemann (2016) The History of Cartography, Volume Six: Cartography in the Twentieth Century, The AAG Review of Books, 4:3, 159-161, DOI: 10.1080/2325548X.2016.1187504 To link to this article: https://doi.org/10.1080/2325548X.2016.1187504 Published online: 07 Jul 2016. Submit your article to this journal Article views: 312 View related articles View Crossmark data Full Terms & Conditions of access and use can be found at http://www.tandfonline.com/action/journalInformation?journalCode=rrob20 The AAG Review OF BOOKS The History of Cartography, Volume Six: Cartography in the Twentieth Century Mark Monmonier, ed. Chicago, document how all cultures of all his- IL: University of Chicago Press, torical periods represented the world 2015. 1,960 pp., set of 2 using maps” (Woodward 2001, 28). volumes, 805 color plates, What started as a chat on a relaxed 119 halftones, 242 line drawings, walk by these two authors in Devon, England, in May 1977 developed into 61 tables. $500.00 cloth (ISBN a monumental historia cartographica, 978-0-226-53469-5). a cartographic counterpart of Hum- boldt’s Kosmos. The project has not Reviewed by Jörn Seemann, been finished yet, as the volumes on Department of Geography, Ball the eighteenth and nineteenth cen- State University, Muncie, IN. tury are still in preparation, and will probably need a few more years to be published.
    [Show full text]
  • Ordnance Survey and the Depiction of Antiquities on Maps: Past, Present and Future
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by Publikationsserver der Universität Tübingen Ordnance Survey and the Depiction of Antiquities on Maps: Past, Present and Future. The Current and Future Role of the Royal Commissions as CAA97 Suppliers of Heritage Data to the Ordnance Survey Diana Murray Abstract The background and history of the mapping of archaeological sites is described, followed by an account of the method used to transfer information on 'antiquities' to the Ordnance Survey today. The impact of digitisation on the appearance of archaeology on OS maps has been of concern but the use of digital technology by the Royal Commissions, in particular GIS, opens up many opportunities for future mapping of the archaeological landscape. 1 Background Society, having had its attenticxi recently directed to the fact that many of the primitive moiuments of our natiaial history, partly From the earliest stages of the develcpment of modem mapping, from the progress of agricultural improvements, and in part 'antiquities' have been depicted as integral and important visual from neglect and spoilation, were in the course of being elements of the landscape. Antiquities appear on maps as early removed, was of the opini<xi, that it would be of great as the 17th century but it was oily when, in the mid-18th consequence to have all such historical monuments laid down century the systematic mapping of Scotland was undertaken for cm the Ordnance Survey of Scotland in the course of military purposes in response to the 1745 rebelliai, that preparation'.
    [Show full text]
  • Report on Surveying User Needs and Requirements
    Report on Surveying User Needs and Requirements Outcome of the European GNSS’ User Consultation Platform Reference: GSA-MKD-SM-UREQ-229766 Issue/Revision: 2.0 Date: 01/07/2019 Change record Issue/ Revision Changes Date 1.0 First issue 18/10/2018 2.0 Refer to Annex 6 01/07/2019 REPORT ON SURVEYING USER NEEDS AND REQUIREMENTS 3 Table of Contents 1 Introduction and context of the report 5 1.1 Methodology 5 1.2 Scope 5 2 Executive Summary 8 3 Reference documents 9 4 Market Overview and trends 11 4.1 Market Evolution and Key Trends 11 4.2 Main Market Players 13 4.3 Main User Communities 16 5 GNSS User Requirements Analysis 18 5.1 GNSS use in Surveying 18 5.2 Land Surveying Applications 28 5.3 Mapping/GIS Applications 37 5.4 Marine Surveying Applications 40 5.5 Detailed Accuracy Requirements per application/specific application and typical performance achieved by GNSS 43 5.6 Additional User Requirement Considerations 45 5.7 Prospective use of GNSS in surveying 46 5.8 GNSS limitations in the surveying domain 48 5.9 Drivers for User Requirements 49 5.10 Policy, Regulation and Standards 50 5.11 Conclusions 52 6 User Requirements on the PNT solution 54 6.1 Table with User Requirements on the PNT solution 54 7 Annexes 57 Annex 1: The use of RPAS in surveying 57 Annex 2: Analysis of past and on-going projects 58 Annex 3: Definition of key GNSS performance parameters 58 Annex 4: Synthesis of Surveying User Requirements 61 Annex 5: List of Acronyms 62 Annex 6: Updates following the User Consultation Platform 2018 64 4 01 TableS AND FIGURES Tables Table
    [Show full text]
  • The Economic Contribution of Ordnance Survey Gb
    Final report ORDNANCE SURVEY THE ECONOMIC CONTRIBUTION OF ORDNANCE SURVEY GB Public version SEPTEMBER 24th 1999 Original report published May 14th 1999 OXERA Oxford Economic Research Associates Ltd is registered in England, no. 1613053. Registered office: Blue Boar Court, Alfred Street, Oxford OX1 4EH, UK. Although every effort has been made to ensure the accuracy of the material and the integrity of the analysis presented herein, Oxford Economic Research Associates Ltd accepts no liability for any actions taken on the basis of its contents. Oxford Economic Research Associates Ltd is not licensed in the conduct of investment business as defined in the Financial Services Act 1986. Anyone considering a specific investment should consult their own broker or other investment adviser. Oxford Economic Research Associates Ltd accepts no liability for any specific investment decision which must be at the investor’s own risk. |O|X|E|R|A| Final report Executive Summary Ordnance Survey(OS) has been mapping Great Britain since 1791. In its role as the national mapping agency, OS produces a range of products and services, including a base dataset, which are driven by the needs of the national interest and the demands of customers. As a primary producer, OS makes a significant contribution to the national economy. This economic contribution is assessed in this report by examining the impact of OS as a purchaser of raw materials from suppliers, as a producer of final goods and services, and as a producer of intermediate goods and services which are used in a variety of sectors. The contribution of OS to distributors and to competitors is also considered.
    [Show full text]
  • The History of Geodesy Told Through Maps
    The History of Geodesy Told through Maps Prof. Dr. Rahmi Nurhan Çelik & Prof. Dr. Erol KÖKTÜRK 16 th May 2015 Sofia Missionaries in 5000 years With all due respect... 3rd FIG Young Surveyors European Meeting 1 SUMMARIZED CHRONOLOGY 3000 BC : While settling, people were needed who understand geometries for building villages and dividing lands into parts. It is known that Egyptian, Assyrian, Babylonian were realized such surveying techniques. 1700 BC : After floating of Nile river, land surveying were realized to set back to lost fields’ boundaries. (32 cm wide and 5.36 m long first text book “Papyrus Rhind” explain the geometric shapes like circle, triangle, trapezoids, etc. 550+ BC : Thereafter Greeks took important role in surveying. Names in that period are well known by almost everybody in the world. Pythagoras (570–495 BC), Plato (428– 348 BC), Aristotle (384-322 BC), Eratosthenes (275–194 BC), Ptolemy (83–161 BC) 500 BC : Pythagoras thought and proposed that earth is not like a disk, it is round as a sphere 450 BC : Herodotus (484-425 BC), make a World map 350 BC : Aristotle prove Pythagoras’s thesis. 230 BC : Eratosthenes, made a survey in Egypt using sun’s angle of elevation in Alexandria and Syene (now Aswan) in order to calculate Earth circumferences. As a result of that survey he calculated the Earth circumferences about 46.000 km Moreover he also make the map of known World, c. 194 BC. 3rd FIG Young Surveyors European Meeting 2 150 : Ptolemy (AD 90-168) argued that the earth was the center of the universe.
    [Show full text]
  • Bce 206 Engineering Surveying
    LECTURE NOTE COURSE CODE- BCE 206 ENGINEERING SURVEYING Under revision BCE206-ENGG. SURVEYING (3-1-0) CR-04 Module –I (10 Hrs) 1. Concept of Surveying- Definition of surveying, Classification, Principle, Accuracy 2. Linear Measurement- Different methods of direct measurement instrument for chaining, Ranging, Chaining on uneven slopping ground, Errors in Chaining, Corrections. 3. Chain Surveying – Chain triangulation, Survey stn., lines, locating ground features, field work, instruments for setting out basic problems in chaining, obstacles in chaining Module –II (10 Hrs) 4. Compass Surveying – Principles use of Prismatic Compass, Measurement of bearings, Conversion of bearings, Local attraction, Correction of compass traverse. 5. Plane Table Survey- Principles, Advantages and disadvantages, Equipment, Accessories and their uses. Methods of plane table survey. Two point and three point problems. Module –III (10 Hrs) 6. Levelling- Types of levelling and their uses, Permanent adjustment, Curvature and refraction effects. 7. Contouring-Characteristics and uses of contours. Methods of contouring. Module –IV (10 Hrs) 8. Theodolite Survey – Application in Height and distance measurements. Permanent adjustment of transit theodolite, methods of repetitions and reiterations. 9. Curve Setting – Simple circular curve setting by chain, tape & theodolite 10. Minor Survey Instruments – Box-sextant, Planimeter, Pantagraph, their working principles and uses. Reference Books: 1. Surveying & Levelling – Kanetkar & Kulkarni, Vol.-I, Pune Vidyarthi Griha Prakashan. 2. Surveying – Punmia, Vol. – I, Laxmi Publication. 3. Surveying – S.K. Duggal, Tata McGraw Hill Under revision Disclaimer This document does not claim any originality and cannot be used as a substitute for prescribed textbooks. The information presented here is merely a collection by the committee members for their respective teaching assignments.
    [Show full text]
  • The Triangulation Method of Stadia Transit Topographic Surveying Adapted to Landscape Architecture Kenneth Boyd Simmons University of Massachusetts Amherst
    University of Massachusetts Amherst ScholarWorks@UMass Amherst Masters Theses 1911 - February 2014 1927 The triangulation method of stadia transit topographic surveying adapted to landscape architecture Kenneth Boyd Simmons University of Massachusetts Amherst Follow this and additional works at: https://scholarworks.umass.edu/theses Simmons, Kenneth Boyd, "The triangulation method of stadia transit topographic surveying adapted to landscape architecture" (1927). Masters Theses 1911 - February 2014. 1965. Retrieved from https://scholarworks.umass.edu/theses/1965 This thesis is brought to you for free and open access by ScholarWorks@UMass Amherst. It has been accepted for inclusion in Masters Theses 1911 - February 2014 by an authorized administrator of ScholarWorks@UMass Amherst. For more information, please contact [email protected]. [Win inniffll FIVE COLLEGE DEPOSITORY ' -I V 111 I'i LV).^i This thesis is not to be loaned outside the library building. For this purpose, use the copy in the department where the work of the thesis was done THE THIANGULATION METHOD OF STADIA TRANSIT TOPOGRAPHIC SURVEYING ADAPTED TO IANDSCAPE ARCHITECTURE ILLUSTRATED WITH A HiACTICAL PROBLEM BY KENNETH B. SIMMONS, B. S. THESIS SUBMITTED FOR THE DEGREE OF MASTER OF LANDSCAPE ARCHITECTURE MASSACHUSETTS AGRICULTURAL COLLEGE AMHERST, MASSACHUSETTS. JUNE 1927 . THE TRIANGULA TION METHOD OP STADIA TRANSIT TOPOGRAPHIC SURVEYING ADAPTED TO LANDSCAPE ARCHITECTURE ILLUSTRATED WJRH A PRACTICAL fllOBLEM A. GENERAL 1. Reasons for seleotion of subjeot. 2. Requirements of topographic surveys for use by Civil Engineers. S. Limitation to one kind of surveying. 4. Requirements of topographic surveys for use by Landscape Architects. B. FIELD WORK 1 . General (a) Size of survey party and dis- tribution of men.
    [Show full text]
  • Theodolite Surveying
    THEODOLITE SURVEYING 1 So far we have been measuring horizontal angles by using a Compass with respect to meridian, which is less accurate and also it is not possible to measure vertical angles with a Compass. So when the objects are at a considerable distance or situated at a considerable elevation or depression ,it becomes necessary to measure horizontal and vertical angles more precisely. So these measurements are taken by an instrument known as a theodolite. THEODOLITE SURVEYING 2 THEODOLITE SURVEYING The system of surveying in which the angles are measured with the help of a theodolite, is called Theodolite surveying. THEODOLITE SURVEYING 3 THEODOLITE The Theodolite is a most accurate surveying instrument mainly used for : • Measuring horizontal and vertical angles. • Locating points on a line. • Prolonging survey lines. • Finding difference of level. • Setting out grades • Ranging curves • Tacheometric Survey THEODOLITE SURVEYING 4 TRANSIT VERNIER THEODOLITE THEODOLITETHEODOLITE SURVEYING SURVEYING 5 TRANSIT VERNIER THEODOLITE Fig. Details if Upper & Lower Plates. THEODOLITETHEODOLITE SURVEYING SURVEYING 6 TRANSIT VERNIER THEODOLITE THEODOLITETHEODOLITE SURVEYING SURVEYING 7 CLASSIFICATION OF THEODOLITES Theodolites may be classified as ; A. i) Transit Theodolite. ii) Non Transit Theodolite. B. i) Vernier Theodolites. ii) Micrometer Theodolites. THEODOLITE SURVEYING 8 CLASSIFICATION OF THEODOLITES A. Transit Theodolite: A theodolite is called a transit theodolite when its telescope can be transited i.e revolved through a complete revolution about its horizontal axis in the vertical plane, whereas in a- Non-Transit type, the telescope cannot be transited. They are inferior in utility and have now become obsolete. THEODOLITE SURVEYING 9 CLASSIFICATION OF THEODOLITES B. Vernier Theodolite: For reading the graduated circle if verniers are used ,the theodolite is called as a Vernier Theodolite.
    [Show full text]
  • Theodolite Survey
    1 THEODOLITE SURVEY RCI4C001 SURVEYING Module IV Theodolite Survey: Use of theodolite, temporary adjustment, measuring horizontal andvertical angles, theodolite traversing Mr. Saujanya Kumar Sahu Assistant Professor Department of Civil Engineering Government College of Engineering, Kalahandi Email : [email protected] Theodolite Surveying 2 The system of surveying in which the angles (both horizontal & vertical) are measured with the help of a theodolite, is called Theodolite surveying Compass Surveying vs. Theodolite Surveying ➢Horizontal angles are measured by using a Compass with respect to meridian, which is less accurate and also it is not possible to measure vertical angles with a Compass. ➢So when the objects are at a considerable distance orsituated at a considerable elevation or depression ,it becomes necessary to measure horizontal and vertical angles more precisely. So these measurements are taken by an instrument known as a theodolite. How Does a Theodolite Work? A theodolite works by combining optical plummets (or plumb bobs), a spirit (bubble level), and graduated circles to find vertical and horizontal angles in surveying. An optical plummet ensures the theodolite is placed as close to exactly vertical above the survey point. The internal spirit level makes sure the device is level to to the horizon. The graduated circles, one vertical and one horizontal, allow the user to actually survey for angles. APPLICATIONS 3 • Measuring horizontal and vertical angles. • Locating points on a line. • Prolonging survey lines. • Finding difference of level. • Setting out grades • Ranging curves • Tacheometric Survey • Mesurement of Bearings CLASSIFICATION OF THEODOLITES 4 Theodolites may be classified as ; A. Primary i) Transit Theodolite. ii) Non Transit Theodolite.
    [Show full text]