DOCSLIB.ORG

INDIGO Project: a Simulation Based Approach to Support District Cooling Design And

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
INDIGO Project: a Simulation Based Approach to Support District Cooling Design And ________________________________________________________________________________________________ INDIGO Project: A Simulation Based Approach To Support District Cooling Design And Operation Andrea Costa1, Andrea Bassani1, Jesus Febres2, Susana López2, Saioa Herrero2, Miika Rama3, Krzysztof Klobut3, Yves Stauffer4, Rafael E. Carrillo4, Gorka Naveran5, Marcus Keane6, Raymond Sterling6 1 2 R2M Solution, Pavia, Italy / IK4-Tekniker, Eibar, Spain 3VTT, Espoo, Finland / 4CSEM, Neuchâtel, Switzerland 5Giroa Veolia, Zamudio, Spain / 6NUI Galway, Galway, Ireland Abstract All the developed models will be validated, both independently and considering the integration, using data In a district cooling system different types of cooling acquired at the test-site. generation can be combined (e.g., vapour compression The validated models Will be considered as reference for chillers, absorption chillers, and free cooling). Controlling the development of the innovative controllers, of the such complex systems in an efficient Way is challenging: management strategy, and of the planning tool. The neW the cooling demand is much more difficult to predict than models developed in Modelica Will be part of a District the heat demand and, as for absorption chillers, heat cooling open-source library (DCOL). sources such as the solar energy and the Waste heat are not predetermined by the designers. Introduction The EU project INDIGO deals With the improvement of This paper presents the role of the energy models in the District Cooling (DC) systems. Its main goal is the development of INDIGO, a research project that is funded development of a more efficient, intelligent, and cheaper by the European Union in the context of the Horizon 2020 generation of DC systems (Loureiro, 2018; Costa, 2017). research and innovation program. The project started in The results of INDIGO Will include: March 2016 and it is going to finish in August 2019. Its - predictive controllers; main goal is the improvement of the district cooling (DC) systems. - system management algorithms; In comparison With the heating systems, the cooling - an open-source planning tool. systems present problematic aspects related to the greater To validate the results, the consortium is analysing some difficulty in the prediction of the energy demand. The case studies. The proposed solutions for DC systems Will reason is that the energy demand can change quickly be installed in the Basurto Hospital campus in Bilbao. because it is influenced by factors such as the solar Different models regarding the buildings and all the radiation and the internal heat loads. relevant components of the DC system are being Another problematic issue is that the difference between developed: the supply Water temperature and the return Water 1. generation systems; temperature for DC loops is generally around 8°C, While 2. distribution and storage systems; in district heating loops the difference is usually greater 3. HVAC systems; than 40°C. That causes an increase in the cost of the 4. thermal behaviour of the buildings, considering also piping system and of the energy requested for pumping. internal loads and building use. The improvement of the DC systems shall be achieved The first three parts are being simulated by means of through the development of new tools for the design and Modelica (Modelica, 2016), an open-source object- for the management of district cooling systems: oriented modeling language that provides dynamic • predictive controllers that Will be responsible for simulation models for building energy and control systems. The fourth part is being modelled With determining the set-points of the mechanical systems EnergyPlus (EnergyPlus, 2016). They are going to be (some of them Will include self-learning algorithms), integrated through the Functional Mock-up Interface at all levels (generation, distribution, storage, AHUs, (FMI) for co-simulation (Nouidui, 2014). and fan-coil units). They Will be developed on the basis of “reduced” and validated versions of the The models of certain building envelope elements are energy models (Hoyo Arce, 2017); validated using experimental measurements (heat flow rates, temperatures, entering solar radiation). • an innovative management strategy, on Which the controllers Will be based, Will consider energetic Component models for the air handlers and for the fan- aspects, environmental aspects, and economical coils found in the studied buildings are developed in aspects; Modelica. Different kinds of chillers are modelled too. • an open-source planning tool for the evaluation of Particular attention is paid to the distribution system, existing systems and for the design of new district where thermal and hydraulic effects are coupled and thus must be considered jointly. cooling systems. It Will be based also on the results of simulations; ________________________________________________________________________________________________ Proceedings of the 16th IBPSA Conference 1913 Rome, Italy, Sept. 2-4, 2019 https://doi.org/10.26868/25222708.2019.210705 ________________________________________________________________________________________________ • an open library including physical/mathematical 4. building geometry, thermal behaviour of the building models developed in Modelica of the components that structures, internal loads, and building use. compose a DC system that will be called District 5. Learning algorithms, control and optimisation. cooling open-source library (DCOL). 6. Planning tool. The models regard mainly the real situation of the Basurto The fourth part Will be developed in EnergyPlus and Will Hospital, in Bilbao, Which is divided in 20 buildings, be converted into functional mock-up units (Blochwitz, among them 9 are mechanically cooled. The results of 2012) that Will be then imported and used in a Modelica INDIGO are going to be applied and measured in the model that includes the AHUs. The Weather data Will be plants relative to that facility. The DC system Was integrated in the same functional mock-up unit (FMU) of installed in 2003 and extended in 2011 by Veolia-Giroa. the building. The FMU Will have as input variables latent The chilled Water is produced by tWo absorption chillers and sensible heat gains provided by the AHUs to each and by four vapour compression chillers. The system conditioned thermal zone and as output variable room supplies chilled Water alWays at 7°C (as setpoint conditions (zone air temperature and relative humidity) temperature) and it modulates the Water floW rate. The and outdoor air conditions. absorption chillers are cooled by Water loops, one vapour The combined Modelica-AHUs with EnergyPlus-FMUs compression chiller is Water-cooled While the other three will be then converted into another FMU and used for electric chillers are air-cooled (Fig. 1). The hot Water, training an advanced control algorithm to be developed in which is used by the absorption chillers and to heat the INDIGO and for the integration With the distribution- buildings, is heated by the Waste heat of a cogeneration storage-generation models, Which are being created in system. That heat can be stored in a Water tank. The Modelica. cogeneration system is activated based on the economic The integration of different tools alloWs the exploitation convenience of producing electricity. of their different capabilities. EnergyPlus is a Whole In this case the cooling demand is particularly variable building energy simulation softWare, whose development because it depends on the number of scheduled surgeries is funded by the U.S. Department of Energy – Building and on the occupancy level as Well (Passerini, 2017). Technologies Office. It is free, open-source, and cross- The internal zones are conditioned mainly though Air platform. In EnergyPlus many physical-mathematical Handling Units (AHUs) or through fan-coil units. Since models relative to the building physics (as Well as to the the local regulations for hospitals do not permit air HVAC systems) are already available and validated. recirculation, an important amount of energy is requested Modelica is a non-proprietary, object-oriented, equation- for the treatment of the outdoor air. based language. The use of a Modelica library (Wetter, In the other two pilot cases, located in Barcelona, the 2014) and the development of new models require the use models and the INDIGO solutions (controllers and of a Modelica simulation environment (some management system) Will be tested Without a physical environments are commercial, a few environments are installation. They are not considered in this paper. free). The use of Modelica alloWs a greater flexibility than EnergyPlus. A similar approach has been applied to Water netWorks control optimisation (Perfido, 2017). Validation The models Will be validated, at different levels, using measured data. The quality of the measured data Will be checked in order to eliminate the unreliable ones. The validation process Will consider statistical test methods, with the definition of an acceptable range of accuracy with respect to the model goal. It will be an iterative process. The validated models Will be then used as a tool for the improvement of the plant and for the development of other tools, such as the controller, the management Figure 1: Scheme reporting the situation of the cooling strategy, the planning tool. production/distribution plant in the hospital A monitoring campaign has started in summer 2016 and The integrated detailed modelling it has been completed
Load more

Recommended publications
  • Fifth-Generation District Heating and Cooling Substations: Demand Response with Artificial Neural Network-Based Model Predictive Control
    energies Article Fifth-Generation District Heating and Cooling Substations: Demand Response with Artificial Neural Network-Based Model Predictive Control Simone Buffa 1,*, Anton Soppelsa 1 , Mauro Pipiciello 1, Gregor Henze 2,3,4 and Roberto Fedrizzi 1 1 Eurac Research, Institute for Renewable Energy, Viale Druso 1, 39100 Bolzano, Italy; [email protected] (A.S.); [email protected] (M.P.); [email protected] (R.F.) 2 Department of Civil, Environmental and Architectural Engineering, University of Colorado Boulder, Boulder, CO 80309-0428, USA; [email protected] 3 National Renewable Energy Laboratory, Golden, CO 80401, USA 4 Renewable and Sustainable Energy Institute, Boulder, CO 80309, USA * Correspondence: simone.buff[email protected]; Tel.: +39-0471-055636 Received: 16 July 2020; Accepted: 11 August 2020; Published: 21 August 2020 Abstract: District heating and cooling (DHC) is considered one of the most sustainable technologies to meet the heating and cooling demands of buildings in urban areas. The fifth-generation district heating and cooling (5GDHC) concept, often referred to as ambient loops, is a novel solution emerging in Europe and has become a widely discussed topic in current energy system research. 5GDHC systems operate at a temperature close to the ground and include electrically driven heat pumps and associated thermal energy storage in a building-sited energy transfer station (ETS) to satisfy user comfort. This work presents new strategies for improving the operation of these energy transfer stations by means of a model predictive control (MPC) method based on recurrent artificial neural networks. The results show that, under simple time-of-use utility rates, the advanced controller outperforms a rule-based controller for smart charging of the domestic hot water (DHW) thermal energy storage under specific boundary conditions.
    [Show full text]
  • Performance Prediction of a Solar District Cooling System in Riyadh, Saudi T Arabia – a Case Study ⁎ G
    Energy Conversion and Management 166 (2018) 372–384 Contents lists available at ScienceDirect Energy Conversion and Management journal homepage: www.elsevier.com/locate/enconman Performance prediction of a solar district cooling system in Riyadh, Saudi T Arabia – A case study ⁎ G. Franchini , G. Brumana, A. Perdichizzi Department of Engineering and Applied Sciences, University of Bergamo, 5 Marconi Street, Dalmine 24044, Italy ARTICLE INFO ABSTRACT Keywords: The present paper aims to evaluate the performance of a solar district cooling system in typical Middle East Solar cooling climate conditions. A centralized cooling station is supposed to distribute chilled water for a residential com- District cooling pound through a piping network. Two different solar cooling technologies are compared: two-stage lithium- Parabolic trough bromide absorption chiller (2sABS) driven by Parabolic Trough Collectors (PTCs) vs. single-stage lithium-bro- Absorption chiller mide absorption chiller (1sABS) fed by Evacuated Tube Collectors (ETCs). A computer code has been developed Thermal storage in Trnsys® (the transient simulation software developed by the University of Wisconsin) to simulate on hourly basis the annual operation of the solar cooling system, including building thermal load calculation, thermal losses in pipes and control strategy of the energy storage. A solar fraction of 70% was considered to size the solar field aperture area and the chiller capacity, within a multi-variable optimization process. An auxiliary com- pression chiller is supposed to cover the peak loads and to be used as backup unit. The two different solar cooling plants exhibit strongly different performance. For each plant configuration, the model determined the optimal size of every component leading to the primary cost minimization.
    [Show full text]
  • District Cooling Systems
    DEPARTMENT OF TECHNOLOGY AND BUILT ENVIRONMENT TECHNOLOGICAL AND ECONOMIC EVALUATION OF DISTRICT COOLING WITH ABSORPTION COOLING SYSTEMS IN GÄVLE (SWEDEN) Elixabet Sarasketa Zabala June 2009 Master’s Thesis in Energy Systems uuir Master Programme in Energy Systems Examiner: Ulf Larsson Supervisor: Åke Björnwall Preface This investigation, as final Thesis Project of Master in Energy Systems (University of Gävle), was started to carry out in February, in collaboration with the company Gävle Energi AB. Many people have been involved answering my questions, providing me with information and so forth; some of those are mentioned below. First of all, I would like to thank Åke Björnwall, my supervisor at Gävle Energi AB, very much for his attention, help and support. His knowledge, comments, guidance and advices have been essential for the development of my work. Needless to say that I have learnt a lot from him. Secondly, I would like to thank the rest of workers at Gävle Energi AB, who have done everything they can to help me, in addition to make pleasant my stay in the company. I would also like to thank Ulf Larsson at the University of Gävle for his help. Furthermore, I am very grateful for all information I have received from other companies. Finally, I do not forget the invaluable support of my mother, Rosa, during all my studies. No one mentioned, no one forgotten. Gävle, June 2009 Elixabet Sarasketa Zabala Abstract Gävle Energi AB is a company which produces electricity as well as heat that is delivered through a district heating network in the municipality of Gävle.
    [Show full text]
  • District Energy Enters the 21St Century
    TECHNICAL FEATURE This article was published in ASHRAE Journal, July 2015. Copyright 2015 ASHRAE. Posted at www.www.burnsmcd.com .org. This article may not be copied and/or distributed electronically or in paper form without permission of ASHRAE. For more information about ASHRAE Journal, visit www.ashrae.org. District Energy Enters The 21st Century BY STEVE TREDINNICK, P.E., MEMBER ASHRAE; DAVID WADE, P.E., LIFE MEMBER ASHRAE; GARY PHETTEPLACE, PH.D., P.E., MEMBER ASHRAE The concept of district energy is undergoing a resurgence in some parts of the United States and the world. Its roots in the U.S. date back to the 19th century and through the years many technological advancements and synergies have developed that help district energy efficiency. This article explores district energy and how ASHRAE has supported the industry over the years. District Energy’s Roots along with systems serving groups of institutional build- District energy systems supply heating and cooling ings, were initiated and prospered in the early decades to groups of buildings in the form of steam, hot water of the 1900s and by 1949 there were over 300 commercial or chilled water using a network of piping from one or systems in operation throughout the United States. Of more central energy plants. The concept has been used course, systems in the major cities of Europe also gained in the United States for more than 140 years with the favor in Paris, Copenhagen and Brussels. In many cases first recognized commercial district energy operation district steam systems were designed to accept waste originating in Lockport, N.Y.
    [Show full text]
  • Production of District Heating, District Cooling, Electricity and Biogas Our
    Our dream – a city free from fossil fuels Application – First Global District Energy Climate Awards Production of district heating, district cooling, electricity and biogas Borås Energi och Miljö AB, Sweden Borås Energi och Miljö AB, is a municipally owned company and part of Borås Stadshus AB. Contact: Jonas Holmberg – Head of Marketing, +46 33 35 72 20, [email protected] www.borasenergimiljo.se Part of Borås Stadshus AB Borås is Sweden’s 13th largest municipally. Around 64,000 people live in Borås City, and over 100,000 The accumulator tank. throughout the municipality. Borås Energi och Miljö AB (BEM) is a municipally owned company that handles refuse and the production of district heating, cooling and electricity in the municipality of Borås. The company has a vision of a city free from fossil fuels. BEM runs a number of facilities and services, all of which contribute to the reduction of greenhouse gas emissions in one way or another. The term “emissions” used in thes document usally refers to greenhouse gases. First off, please watch our company movie for a quick tour of our company. Click here to watch the movie. We harness all energy streams Whenever they sort their household waste, travel on Today Borås City is a pioneer when it comes to working biogas buses, relax at home with comfortable district in harmony with the biological cycle, and we look on heating or spend time at an office with pleasant district combustible household refuse as a valuable energy cooling, the inhabitants of Borås play an important role resource – energy that would otherwise be wasted.
    [Show full text]
  • District Cooling Versus Individual Cooling in Urban Energy Systems: the Impact of District Energy Share in Cities on the Optimal Storage Sizing
    energies Article District Cooling Versus Individual Cooling in Urban Energy Systems: The Impact of District Energy Share in Cities on the Optimal Storage Sizing Dominik Franjo Dominkovi´c 1,* and Goran Krajaˇci´c 2 1 Department of Applied Mathematics and Computer Science, Technical University of Denmark, Matematiktorvet, 2800 Kgs. Lyngby, Denmark 2 Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Ivana Lucica 5, 10000 Zagreb, Croatia; [email protected] * Correspondence: [email protected]; Tel.: +45-93-511-530 Received: 25 December 2018; Accepted: 26 January 2019; Published: 28 January 2019 Abstract: The energy transition of future urban energy systems is still the subject of an ongoing debate. District energy supply can play an important role in reducing the total socio-economic costs of energy systems and primary energy supply. Although lots of research was done on integrated modelling including district heating, there is a lack of research on integrated energy modelling including district cooling. This paper addressed the latter gap using linear continuous optimization model of the whole energy system, using Singapore for a case study. Results showed that optimal district cooling share was 30% of the total cooling energy demand for both developed scenarios, one that took into account spatial constraints for photovoltaics installation and the other one that did not. In the scenario that took into account existing spatial constraints for installations, optimal capacities of methane and thermal energy storage types were much larger than capacities of grid battery storage, battery storage in vehicles and hydrogen storage. Grid battery storage correlated with photovoltaics capacity installed in the energy system.
    [Show full text]
  • District Cooling Plant with High Efficiency Chiller and Ice Storage
    District Cooling Plant with High Efficiency Chiller and Ice Storage System YOSHINORI HIDA*1 SEIJI SHIBUTANI*1 MATSUYUKI AMANO*1 NORIYASU MAEHARA*2 Mitsubishi Heavy Industries, Ltd. (MHI) received an order from Singapore District Cooling Pte, Ltd., for a district cooling plant with a cooling capacity of 57 MW (16,210 RT). This project was an engineering, procurement, and construction contract that included the design, manufacture, procurement, construction, and commissioning of a high-efficiency district cooling plant that would serve as a model for South East Asia where the year-round cooling demand is high. One year has now elapsed since the start of commercial operation, and this plant is currently operating at higher efficiency than originally planned. This report describes the performance improvement technologies, such as the centrifugal chiller and ice storage system, that were introduced to achieve this increased efficiency. the movement and maintainability of each machine and 1. Introduction piping system into the design. In addition, MHI reduced The Government of Singapore has developed the Marina the cost of the detailed design using automatic isometric South area to include a district cooling plant and an advanced drawings for the plant piping with 3D CAD. telecommunication infrastructure. This area is beginning to take on a role as an important business center in Singapore. MHI received an order for the first district cooling plant in Table 1 Main equipment of heat source components of No. 1 plant this area from Singapore District Cooling Pte, Ltd. (SDC)Note, Quantity Quantity and delivered and handed over the plant in 2007 as a model of Chillers during at time of first stage completion high-efficiency technology.
    [Show full text]
  • Geothermal Space Cooling
    Proceedings, 6th African Rift Geothermal Conference Addis Ababa, Ethiopia, 2nd – 4th November 2016 GEOTHERMAL SPACE COOLING Thorleikur Johannesson, Yngvi Gudmundsson and Kristin Gudmundsdottir Verkis Consulting Engineers Ofanleiti 2 – 103 Reykjavík ICELAND [email protected], [email protected], [email protected] ABSTRACT The paper will propose an introduction to the heat pump technology applied to geothermal space cooling and give examples of how it can be used. Geothermal ground source heat pumps are currently the most widespread form of geothermal utilization. They usually require rather low enthalpy geothermal resources and can be used for both heating and cooling purposes as their cycle is reversible. Such equipment required a significant electrical input. On the other hand, geothermal heat pumps for cooling purpose is something completely different. Instead of using electricity for the heat pump compressor, like in a normal cooling machine or a refrigerator, the heat from a geothermal resource is used as the driving energy in an absorption heat pump, often named geothermal absorption chillers. Market prospects for residential and space cooling indicate that a steady increase can be expected in the coming years. The paper will indicate potential cooling demand in various places in around the African rift where geothermal energy is available. In addition to presenting and comparing the most common cooling methods, a basic business case will be developed. 1. INTRODUCTION Geothermal ground source heat pumps are currently the most widespread form of geothermal utilization. Geothermal heat pumps for decentralized applications are rather common in Europe. As the cycle on which the heat pumps are based is reversible, they can be applied for both heating and cooling purposes.
    [Show full text]
  • District Cooling Energy-Efficient, Compact and Easy-To-Maintain District Cooling Solutions
    District cooling Energy-efficient, compact and easy-to-maintain district cooling solutions It should come as no surprise that district cool- ing – using a central source to supply cooling to a number of buildings instead of multiple individual systems – is widely used. A district cooling solu- tion is very energy-efficient and easy for property owners to operate. It is also perfect for histori- cal buildings and architectural gems that prohibit individual air-conditioning units, and where space is often limited. Cool buildings the smart way system produces no noise or vibrations. Hotels, shopping centres, industrial buildings, office buildings, residential build- District cooling begins by chilling water in a central plant. A MDD00308EN cold-water storage facility can also be used to take advan- ings, sports centres and hospitals are examples of facilities tage of off-peak power rates. Cold water is then pumped that use district cooling. Alfa Laval can also aid in the cleaning through the district cooling system to heat exchangers in of the heat exchangers. different buildings. The heat exchangers are used to transfer The west’s largest district cooling system the cold from the pipeline to the internal systems. After the Frances’s Climespace is the biggest district cooling network in cold has been used in air conditioning around the building the western world and the only of its kind in Paris. Alfa Laval units, the warmed water returns to the heat exchangers for developed a standardized concept for complete sub-station cooling again. units for Climespace, rather than just heat exchangers, ensur- Economical, flexible and quiet cooling ing reliable quality, fast response, high performance and low District cooling is the most convenient method for the pro- prices for the new products.
    [Show full text]
  • UNEP Report District Energy in Cities
    U NITED N ATIONS E NVIRONMENT P ROGRAMME UNEP in collaboration with in UNEP and Renewable Energyand Renewable Energy of Efficiency Potential the Unlocking IN CITIES ENERGY DISTRICT FOREWORD JOINT FOREWORD FROM ACHIM STEINER, KANDEH K. YUMKELLA, JOAN CLOS AND GINO VAN BEGIN Cities have a central role to play in the transition to sustainable energy: as managers of interdependent Port Louis, Mauritius, is developing the first seawater district cooling system in Africa. The state of Gujarat services and utilities, they are uniquely placed to enable the integrated solutions necessary to rapidly will develop a public district cooling system in India. Cities in West Asia are expanding their district cooling advance both energy efficiency and renewable energy. One such integrated solution is the development systems. Others in China and Eastern Europe, with high shares of district heating, are modernizing their of modern district energy systems. systems to improve efficiency. Some cities with long-standing district energy systems in the European Moving to sustainable energy is critical if the world is to achieve its sustainable development goals: Union and United States are now integrating high shares of renewables in heating, cooling and power. from eradicating poverty and social inequality, to combating climate change and ensuring a healthy This report establishes the framework to accelerate these efforts through an exchange of practice. For environment. The United Nations Secretary-General’s Sustainable Energy for All initiative provides example, cities ranging from Port Louis to St. Paul or Kuwait City can learn from other cities, such as Hong a framework for this transition through three complementary objectives: universal access to modern Kong, Dubai or Paris, while also providing best-practice recommendations that will be relevant to other energy services, doubling the global rate of improvement in energy efficiency and doubling the share cities struggling with growing air-conditioning demand.
    [Show full text]
  • Heat Pump for District Cooling and Heating at Oslo Airport, Gardermoen
    HEAT PUMP FOR DISTRICT COOLING AND HEATING AT OSLO AIRPORT, GARDERMOEN Geir Eggen1 and Geir Vangsnes² 1) COWI AS. PB 2564 Sentrum, N-7414 Trondheim. 2) Oslo Lufthavn AS, Edvard Munchsvei, 2060 Gardermoen. ABSTRACT At Gardermoen, one of the largest groundwater reservoirs in Norway is located. This aquifer is used for both heating and cooling of Gardermoen Airport. In the summer, ground water is pumped from cold wells and used for cooling before it is returned to the warm wells. In winter, this process is turned around, as ground water from the warm wells is used as heat source for the heat pump. The heat pump is mainly designed for cooling, and the design cooling demand is 9 MW. The district cooling water is pre-cooled by the ground water, and post cooled by the combined heat pump/refrigeration plant. The base heat load is covered by the heat pump. Additional heat is supplied from a heat energy central with biofuels as well as oil heated and electrically heated boilers. During the last years, heat production from the heat pump was about 11 GWh/year, and the heat pump also provides about 8 GWh/year of the cooling demand. In addition, approximately 3 GWh/year cold is produced by direct heat exchange with ground water. Compared with a district heating system heated by fossil fuels, and a conventional refrigeration system for district cooling, the pay back period for the aquifer heat pump system is within a couple of years. Key Words: heat pumps, district cooling, district heating, aquifer thermal energy systems (ATES).
    [Show full text]
  • Chiller System Design and Control
    Applications Engineering Manual Chiller System Design and Control November 2011 SYS-APM001-EN Chiller System Design and Control Susanna Hanson, applications engineer Mick Schwedler, applications manager Beth Bakkum, information designer Preface This manual examines chilled-water-system components, configurations, options, and control strategies. The goal is to provide system designers with options they can use to satisfy the building owners’ desires, but this manual is not intended to be a complete chiller-system design manual. System designers may get the most use from this manual by familiarizing themselves with chilled-water-system basics and understanding the benefits of various options. Thereafter, when a specific job will benefit from these advantages, consult appropriate sections of the manual in detail. The Engineers Newsletters that are referenced in this manual are available at: www.trane.com/commercial/library/newsletters.asp Trane, in proposing these system design and application concepts, assumes no responsibility for the performance or desirability of any resulting system design. Design of the HVAC system is the prerogative and responsibility of the engineering professional. “Trane” and the Trane logo are registered trademarks, and TRACE, System Analyzer and TAP are trademarks of Trane, a business of Ingersoll-Rand. © 2009 Trane All rights reserved Chiller System Design and Control SYS-APM001-EN Contents Preface .................................................................................................. i Primary System
    [Show full text]