ATA Tournament Rules for 2020-2021

Total Page:16

File Type:pdf, Size:1020Kb

ATA Tournament Rules for 2020-2021 ATA Tournament Rules for 2020-2021 The 2020-2021 Tournament Season will end on Sunday, May 30, 2021. The final day for ATA Licensees to host a sanctioned Class “C” event will be May 15, 2021. All tournaments held after those dates will have points posted in the following season’s standings. *ATA International reserves the right to make changes or adjustments to the rules & procedures as it sees fit during the competition season* Signup for our email alerts to get access and stay informed about the latest news, tournament information, and other important training events in your area. Event newsletter signup http://eepurl.com/biRC4f '''Unless it is expressly stated that something is permissible in these rules, it is illegal.” If you are unsure about a particular situation, submit your question in writing to [email protected] Table of Contents . Page # Section 1 - TOURNAMENT OFFICIALS AND THEIR DUTIES Page 01 Section 2 - DUTIES OF ATA SENIOR INSTRUCTORS AND JUDGES Page 04 Section 3 - JUDGING LEVELS and CERTIFICATIONS Page 06 Section 4 - UNIFORMS, SAFETY EQUIPMENT & WEAPONS Page 09 Section 5 - COMPETITION OPPORTUNITIES Page 15 Section 6 - COMPETITION DIVISIONS AND RING ASSIGNMENTS Page 16 Section 7 - TOURNAMENT STANDARD OPERATING PROCEDURES Page 24 Section 8 - TRADITIONAL FORM COMPETITION Page 32 Section 9 - TRADITIONAL WEAPONS COMPETITION Page 38 Section 10 - COMBAT WEAPONS SPARRING COMPETITION Page 42 Section 11 - TRADITIONAL POINT SPARRING / ONE-STEP COMPETITION Page 46 Section 12 - ATA-CREATIVE COMPETITION Page 55 Section 13 - ATA-XTREME COMPETITION Page 60 Section 14 - ATA TEAM SPARRING COMPETITION Page 64 Section 15 - ATA TIGER COMPETITION Page 75 Section 16 - SPECIAL ABILITIES COMPETITION Page 77 Section 17 - CHAMPION PROGRAMS Page 82 Section 18 - STATE CHAMPIONSHIP PROGRAM Page 90 Section 19 - DISTRICT CHAMPIONSHIP PROGRAM Page 92 Section 20 - WORLD CHAMPION PROGRAM Page 95 Section 21 - TEAM SYNCHRONIZED COMPETITION Page 98 Section 22 - TEAM DEMONSTRATION COMPETITION Page 101 Section 23 - MISCELLANEOUS INFORMATION Page 104 SECTION 1 - TOURNAMENT OFFICIALS AND THEIR DUTIES As in every organization, there is a specific and detailed chain of command that must be followed to achieve consistent success. Any person having a question concerning an aspect of a tournament should adhere to the chain of command listed below to obtain the answer: 1. Speak to the judge. 2. Ask your instructor. 3. Have one’s instructor speak to the RTTL in one’s area. 4. Have one’s instructor speak to the Tournament Department at Headquarters. International Chairman of Tournaments The International Chairman of Tournaments is the overseer of all aspects of tournaments. He/she is part of the ATA International Headquarters staff and is appointed by ATA International Headquarters. The Tournament Department is responsible for maintaining all tournament sanction paperwork, the oversight of tournament judging certification, the preparation for world and national tournaments, the arbitration of disputes, and rule revisions. The International Chairman of Tournaments is: Senior Master Betsy Stevens — 8th Degree Black Belt - [email protected] Authority of the International Tournament Director The International Tournament Director is the final arbiter of these rules. Any determination concerning the interpretation, applicability or necessary exceptions to the rules shall be made in the sole discretion of the International Tournament Director. National Tournament Director A National Tournament Director is appointed by the Grand Master of Songahm Taekwondo with the input of the International Chairman of Tournaments based upon their experience with the individual and any recommendations of the organization’s seniors. This person is in charge of the general operations of world and national tournaments and supplies a great deal of input on operation procedures and rule revisions. The ATA currently has two National Tournament Directors and several Assistant National Tournament Directors. USA - National Directors of Tournaments (NTD) at this time are: Chief Master Izel Rivera - 8th Degree Black Belt Master Kelly Harman - 7th Degree Black Belt USA - Assistant National Tournament Directors: Chief Master David Kowkabany - 8th Degree Black Belt Senior Master Jack Hornbuckle - 7th Degree Black Belt Master Michelle Pavlik - 7th Degree Black Belt European - National Tournament Director: Mr. Antonio Monteiro - 6th Degree Black Belt Australian - National Tournament Director: Ms. Suzie Sanfort - 5th Degree Black Belt South American - National Tournament Director: Master Rodolpho Cavenatti - 6th Degree Black Belt Director of Development -Team Sync and Team Demo - Chief Master Scott Skiles - 8th Degree Black Belt Director of Development - Team Sparring - Master Jesse Isaacs - 6th Degree Black Belt National Tournament Staff - Master Kevin Pavlik - 6th Degree Black Belt 1 Regional Tournament Team Leader The Regional Tournament Team Leader (RTTL) for each region is appointed by the Grand Master in consultation with the International Chairman of Tournaments. This volunteer leadership position is based upon the International Chairman's experience with the individual, the person's willingness to volunteer, plus the recommendation of the seniors of the region. The duties of this position vary according to the region in which they are involved. These duties include, but are not limited to: Ɣ Approving the tournament sanction documents for his/her region. Ɣ Verifying that tournament sites are adequate for a regional event. Ɣ Planning and approving the competition schedule for regional tournaments. Ɣ Organizing and running the regional tournaments including arbitration issues that may arise. Ɣ Administering judging certification clinics and tests. Ɣ The RTTL will send the original result sheets, packets (competitor slips) and tournament staff sheet to ATA Headquarters within seven business days of the event at the tournament host's expense. Ɣ The RTTL will keep the copy of the result sheets for at least two years in case of association research needs. Ɣ The RTTL will email data files within two business days of the tournament. One should check with one’s Instructor as to the region in which the student belongs. The Regional Tournament Team Leaders for the 2020-2021 season are listed below: Region RTTL Email Address 101A Master Beth Giles [email protected] 101B Master Tony Rosa [email protected] 102A Sr. Master Kelli Shoup [email protected] 102B Master Andrew Steinman [email protected] 103A Master Brad Thomas [email protected] 103B Master Christopher Martin [email protected] 104A Sr. Master Jeremy Moore [email protected] 104B Ms. Andrea Jung [email protected] 105 Mr. Michael Lee [email protected] 106 Master Tammy Parker Co-RTTL [email protected] 106 Ms. Beth Moreland Co-RTTL [email protected] 107 Master Nicholas Schafer [email protected] 108 Master Darin Prazer [email protected] 109 Ms. Christy Overby [email protected] 110A Master Susan Winter [email protected] 110B Mr. Michael Morino [email protected] 111A Sr. Master Julia Wegmann [email protected] 111B Ms. Melynda Cordry [email protected] 112 Sr. Master Jack Hornbuckle [email protected] 114 Mr. Matthew White [email protected] 115 Ms. Sarah Worsham [email protected] 116 Ms. Rachel Dendy [email protected] 117 Master Michelle Pavlik [email protected] 118 Master Jessiah Rueckert [email protected] 119A Ms. Sharon Pleu [email protected] 119B Ms. Sharon Pleu [email protected] 119C Mr. Todd Nadeau [email protected] 119D Mr. Joshua Schultz [email protected] 2 Assistant Regional Tournament Team Leader Many regions have elected to ask for volunteers to serve as Assistant Regional Tournament Team Leaders or as part of the Regional Tournament Volunteer Staff. Two main reasons for this are: Ɣ The enormous responsibility of running regional tournaments. Ɣ To provide a training ground for future volunteer Regional Tournament Team Leaders. Assistant Regional Tournament Team Leaders, whose names are suggested by the RTTL, are selected by the Grand Master in consultation with the International Chairman of Tournaments based upon the chairperson's experience with the individual, the person's willingness to volunteer, plus the recommendation of the seniors of the region. The responsibilities of these assistants are assigned by Regional Tournament Team Leaders. One should check with their instructor as to the name of the Assistant Regional Tournament Team Leader and the Regional Tournament Volunteer Staff members for one’s region. Tournament Arbitrators The position of Tournament Arbitrator is a temporary volunteer assignment during an individual tournament. It is not a permanent volunteer position. The International Chairman of Tournaments or the Regional Tournament Team Leader is in charge of supervising the event and the arbitrators are under their guidance. If a tournament arbitrator is used for a tournament they should be selected from the tournament staff. During National or World Tournaments, the International Chairman of Tournaments, the National Tournament Director and/or the Assistant National Tournament Directors will perform the duties of arbitrator. Under no circumstances should a senior/master of a region take it upon his/herself to arbitrate a ruling in a ring. He/She may ask for a ring to stop for the purpose of getting the tournament arbitrator to the ring. An arbitrator is responsible for: Ɣ Supervising assigned rings and for
Recommended publications
  • How to Determine Your Ring Size
    bn HOW TO DETERMINE YOUR RING SIZE Please carefully read all instructionsCONFIRM as the PRINTEDmeasurement PAPER may be SIZEinaccurate if not done properly. 1. Ring measurements are very precise. Carefully follow these instructions to obtain an 0 1 2 in accurate measurement. 2. Prior to printing, ensure that Page Scaling is set to “None” on your print dialog box. (To open the print dialog box, press CTRL+P.) 0 10 20 30 40 50 mm 3. Measure the bar on the left. It must be exactly 2 inches or 50 mm long. M EASURE CURRENT R ING 1. Select a ring that properly ts the intended nger. inside diameter 2. Place the ring over the circles below, matching the inside edge of the ring to the circle nearest in size. This measurement refers to the inside diameter of the ring. 3. If the ring falls between two sizes, order the larger size. MEASUREMENTS MATCH THE INSIDE EDGE OF THE RING Size 4 Size 5 Size 6 Size 7 Size 8 Size 9 Size 10 Size 11 Size 12 14.1 mm 14.3 mm 14.7 mm 14.9 mm 15.3 mm 15.7 mm 16.1 mm 16.5 mm 16.7 mm Size 13 Size 14 Size 15 Size 16 Size 17 Size 18 Size 19 Size 20 16.9 mm 17.3 mm 17.7 mm 18.1 mm 18.5 mm 19 mm 19.4 mm 19.8 mm Size 21 Size 22 Size 23 Size 24 Size 25 Size 26 Size 27 20 mm 20.2 mm 20.6 mm 21 mm 21.4 mm 21.8 mm 22.2 mm MEASUREMENTS REFLECT RING SIZES FOR MOST COUNTRIES IN ASIA FOR ASSISTANCE PLEASE E -MAIL SERVICE@ BLUENILE .COM OR CALL (China) 00 800 2200 2100 (Japan) 010 800 2583 6453 (Macau) 00 800 2200 2100 (Singapore)001 800 2200 2100 (Taiwan) 00 800 2200 2100 bn INTERNATIONAL RING SIZE CHART Circumference Diameter UK,
    [Show full text]
  • Archaeological Finds of Jet from Norway Signs of Continuous Contact Westwards in the Viking and Medieval Periods?
    Archaeological Finds of Jet from Norway Signs of continuous contact westwards in the Viking and Medieval Periods? lleid (;josteinltesi The point of departure for this article is the find of half of a fingerring of jet from the archaeological excavations at VesleHjerkinn, Dovre, Oppland. The site is inter­ preted as a mountain lodge at the main trail over the mountains between eastern Norway and Nidaros (Weber 1986, Weber forthcoming). The site contains several buildings dated to the period 1Oth to the 13th century. The jet ring was found in a waste mound close to one of the buildings. Its closest parallels are found among the jet jewellery of supposed British origin from Norwegian Viking Age finds (Shetelig 1946). Gaming pieces and beads of jet from excavations of medieval towns, and beads from stave church sites show that the use of jet extended well into the Middle Ages. It is not clear whether these later findsindicate continuous contact westwards with the same supposed origins of jet as in the Viking Age, or if they originate fromother areas. The jet ring fromVesle Hjerkinn is relatively narrow (ea 4 ), has a round-oval mm cross-section and an outer/inner diameter of 2.4 /1.6 cm (Fig. 1). Its slightly worn surface appears shiny under magnification, although it is far fromhighly polished. Fig. 1. Finger ring ofjet from Vesle Hjerkinn (C. 37230/98). Photo: Ellen Holte, Kulturhistorisk museum, Universityof Oslo. Collegium Medievale 2005 Archaeological Findsof jet from Norway 87 Jet and similar raw materials Much of the literature on jet has a starting point in Pliny the Elder's (23/24-79) account inNatura/is Historia, Book 36, where jet was named aftera river, a region or a city in Lycia (in present day Turkey) called Gagas.
    [Show full text]
  • O-Ring Size Comparison Chart O-Ring Size Comparisonchart *Chart Forcomparison Only
    O-Ring Size Comparison Chart Cross Cross Cross Cross Part ID Sect. ID Sect. Part ID Sect. ID Sect. AS568A ISO SWEDEN BRITAIN JAPAN AS568A ISO SWEDEN BRITAIN JAPAN FRANCE FRANCE Numbers (Inch) (Inch) (MM) (MM) GERMANY Numbers (Inch) (Inch) (MM) (MM) GERMANY 2-001 0.029 0.040 0.74 1.02 X X M487-180 0.192 0.071 4.87 1.80 X 2-002 0.042 0.050 1.07 1.27 X X M490-190 0.193 0.075 4.90 1.90 X M115-100 0.045 0.039 1.15 1.00 X M500-150 0.197 0.059 5.00 1.50 X 2-102 0.049 0.103 1.24 2.62 X X M500-180 0.197 0.071 5.00 1.80 X 2-003 0.056 0.060 1.42 1.52 X X M500-200 0.197 0.079 5.00 2.00 X M178-102 0.070 0.040 1.78 1.02 X M500-250 0.197 0.098 5.00 2.50 X 2-004 0.070 0.070 1.78 1.78 X X M500-300 0.197 0.118 5.00 3.00 X M180-180 0.071 0.071 1.80 1.80 X M500-400 0.197 0.157 5.00 4.00 X M200-180 0.079 0.071 2.00 1.80 X M500-500 0.197 0.197 5.00 5.00 X 2-103 0.081 0.103 2.06 2.62 X X M510-160 0.201 0.063 5.10 1.60 X X M220-160 0.087 0.063 2.20 1.60 X M515-180 0.203 0.071 5.15 1.80 X M224-180 0.088 0.071 2.24 1.80 X 2-107 0.206 0.103 5.23 2.62 X X M240-190 0.094 0.075 2.40 1.90 X 2-009 0.208 0.070 5.28 1.78 X X M250-150 0.098 0.059 2.50 1.50 S3 M530-180 0.209 0.071 5.30 1.80 X M250-180 0.098 0.071 2.50 1.80 X M530-240 0.209 0.094 5.30 2.40 X M254-102 0.100 0.040 2.54 1.02 X M530-265 0.209 0.104 5.30 2.65 X 2-005 0.101 0.070 2.57 1.78 X X M550-150 0.217 0.059 5.50 1.50 M260-190 0.102 0.075 2.60 1.90 X M560-180 0.220 0.071 5.60 1.80 X M280-180 0.110 0.071 2.80 1.80 X M560-240 0.220 0.094 5.60 2.40 X M280-190 0.110 0.075 2.80 1.90 P3 M570-190 0.224 0.075 5.70
    [Show full text]
  • Sizing Your Ring Buying a New Ring in a Size That fits Means That You Can Enjoy It Right Away
    Sizing Your Ring Buying a new ring in a size that fits means that you can enjoy it right away. Use our Ring Sizing Chart to find Tips that perfect fit IF you already have a ring that fits you well. Otherwise, use our Finger Sizing Tool to measure Your ring should fit comfortably on your finger— your finger and determine your ring size. loose enough to slide over the knuckle and snug enough to stay on your finger. Ring Sizing Chart Use this tool if you already have a ring in the size you want. When buying a gift for someone else and using Measuring tips one of their rings, make sure that the ring you are measuring fits on the finger for which the new ring is intend- Your fingers change size during the day and in ed. This chart shows U.S. ring sizes. different weather. The same finger on different hands 1. Print out this chart. may also differ in size. As a result, your ring size for 2. Place the ring over each circle until the INSIDE circle of your ring exactly matches a circle on the chart. a finger of your dominant hand, e.g., the hand you 3. Note the ring size. write with, may be a half size larger that the ring size of the corresponding finger on the other hand. 3 4 5 6 7 8 9 For best results: 14.07 14.88 15.7 16.51 17.32 18.14 18.95 • Measure your finger three to four times in one mm mm mm mm mm mm mm day to find your sizing range.
    [Show full text]
  • Astrometrically Registered Maps of H2O and Sio Masers Toward VX Sagittarii
    ARTICLE DOI: 10.1038/s41467-018-04767-8 OPEN Astrometrically registered maps of H2O and SiO masers toward VX Sagittarii Dong-Hwan Yoon1,2, Se-Hyung Cho2,3, Youngjoo Yun2, Yoon Kyung Choi2, Richard Dodson4, María Rioja4,5, Jaeheon Kim6, Hiroshi Imai7, Dongjin Kim3, Haneul Yang1,2 & Do-Young Byun2 The supergiant VX Sagittarii is a strong emitter of both H2O and SiO masers. However, previous VLBI observations have been performed separately, which makes it difficult to 1234567890():,; spatially trace the outward transfer of the material consecutively. Here we present the astrometrically registered, simultaneous maps of 22.2 GHz H2O and 43.1/42.8/86.2/129.3 GHz SiO masers toward VX Sagittarii. The H2O masers detected above the dust-forming layers have an asymmetric distribution. The multi-transition SiO masers are nearly circular ring, suggesting spherically symmetric wind within a few stellar radii. These results provide the clear evidence that the asymmetry in the outflow is enhanced after the smaller molecular gas clump transform into the inhomogeneous dust layers. The 129.3 GHz maser arises from the outermost region compared to that of 43.1/42.8/86.2 GHz SiO masers. The ring size of the 129.3 GHz maser is maximized around the optical maximum, suggesting that radiative pumping is dominant. 1 Astronomy Program, Department of Physics and Astronomy, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul 08826, Korea. 2 Korea Astronomy and Space Science Institute, 776 Daedeokdae-ro, Yuseong-gu, Daejeon 34055, Korea. 3 Department of Astronomy, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul 03722, Korea.
    [Show full text]
  • Report of the Workshop on Age Estimation of Norwegian Spring Spawning Herring Between, Norway, Denmark, Iceland and the Faroe Islands (WKNSSAGE)
    ICES WKNSSAGE REPORT 2015 ACOM/SCICOM STEERING GROUP ON INTEGRATED ECOSYSTEM OBSERVATION AND MONITORING ICES CM 2015/SSGIEOM:37 REF. SCICOM, ACOM, WGWIDE & WGBIOP Report of the Workshop on Age estimation of Norwegian Spring Spawning Herring between, Norway, Denmark, Iceland and the Faroe Islands (WKNSSAGE) 9–10 November 2015 Charlottenlund, Denmark International Council for the Exploration of the Sea Conseil International pour l’Exploration de la Mer H. C. Andersens Boulevard 44–46 DK-1553 Copenhagen V Denmark Telephone (+45) 33 38 67 00 Telefax (+45) 33 93 42 15 www.ices.dk [email protected] Recommended format for purposes of citation: ICES. 2016. Report of the Workshop on Age estimation of Norwegian Spring Spawn- ing Herring between, Norway, Denmark, Iceland and the Faroe Islands (WKNSSAGE), 9–10 November 2015, Charlottenlund, Denmark. ICES CM 2015/SSGIEOM:37. 46 pp. For permission to reproduce material from this publication, please apply to the Gen- eral Secretary. The document is a report of an Expert Group under the auspices of the International Council for the Exploration of the Sea and does not necessarily represent the views of the Council. © 2016 International Council for the Exploration of the Sea ICES WKNSSAGE REPORT 2015 | i Contents Executive summary ......................................................................................................................1 1 Terms of reference ..............................................................................................................2 2 Agenda and participation..................................................................................................3
    [Show full text]
  • Unsure of Your Ring Size? Please Contact Us for a Free Ring Sizer
    Are you Unsure of your ring size? Please Contact us for a free ring sizer We provide a free size adjustment on all our rings if the ring is too big or too small. We can provide you with a handy, re-usable Ring size multi sizer tool with full instructions. Due to the slight variation with international sizing charts, we strongly recommend using a finger size with the UK measurements indicated to ensure the correct size is provided. We understand that finding the exact finger size may be tricky. So in the event of any difficulties, we provide free assessment ring size adjustment services to ensure that you are happy. Measuring Your Finger Your ring should fit your finger comfortably; snug enough so that it will not fall off, but loose enough to slide over your knuckle. Finger size changes depending on the time of day and the weather. For best results measure your finger size: At the end of the day and when your fingers are warm (Fingers are smaller in the early morning and when cold.) Ring Sizes in the UK and Ireland Women’s rings typically range from size G to R. The most commonly purchased women’s ring sizes at range from size K to N. Size M is the most popular ring size. Men’s rings typically range from size P to Z. The most commonly purchased men’s ring sizes at Hirschfelds range from size R to U. Size T is the most popular ring size. Free Resizing Hirschfelds provides complimentary resizing for all rings purchased from us.
    [Show full text]
  • How to Determine Your Ring Size
    HOW TO DETERMINE YOUR RING SIZE CONFIRM PRINTED PAPER SIZE 1. Ring measurements are very precise. Carefully follow these instructions to obtain an accurate measurement. 0 10 20 30 mm 2. Prior to printing, ensure that Page Scaling is set to “None” on your print dialog box. (To open the print dialog box, press CTRL+P.) 3. Measure the bar on the left. It must be exactly 30 mm long. MEASURE CURRENT RING 1. Select a ring that properly fits the intended finger. Engagement and wedding rings are traditionally worn on the ring finger on the left hand in the INSIDE DIAMETER United Kingdom. 2. Place the ring over the circles below, matching the inside edge of the ring to the circle nearest in size. This measurement refers to the inside diameter of the ring. 3. If the ring falls between two sizes, order the MEASUREMENTS MATCH THE larger size. INSIDE EDGE OF THE RING 14.1 mm 14.5 mm 14.9 mm 15.3 mm 15.7 mm 16.1 mm 16.5 mm 16.9 mm 17.3 mm 17.7 mm 18.1m 18.5m 19.0 mm 19.4 mm 19.8 mm 20.2 mm 20.6 mm 21.0 mm 21.4 mm 21.8 mm 22.2m 22.6m FORFor assistance ASSISTANCE please email PLEASE us at [email protected]. CALL OR EMAIL INTERNATIONAL RING SIZE CHART Circumference Diameter Europe UK United States China Singapore Hong Kong Switzerland (mm) (mm) & Australia & Canada & Japan 44.2 14.1 44 F½ 3 6 4 6 4 44.8 14.3 45 G 5 5¼ 45.5 14.5 G½ 3½ 7 7.5 46.1 14.7 46 H 6 6½ 46.8 14.9 47 H½ 4 8 7 9 47.4 15.1 I 9 7¾ 48.0 15.3 48 I½ 4½ 8 10 48.7 15.5 J 9 49.3 15.7 49 J½ 5 10 9 11 50.0 15.9 50 K 10 50.6 16.1 K½ 5½ 11 10 12 51.2 16.3 51 L 11¾ 51.9 16.5 52 L½ 6 12 11 13 12¾
    [Show full text]
  • Ring Size Guide
    Ring Size Guide 4.5 5 5.5 5.75 6 6.25 6.75 15.29mm 15.7mm 16.1mm 16.31mm 16.51mm 16.71mm 17.12mm 7 7.25 7.5 7.75 8 8.5 12 17.32mm 17.53mm 17.73mm 17.93mm 18.14mm 18.54mm 21.39mm Measure with the Ruler To achieve the best results, you will need to go to the “Printing settings” before printing and ensure that the “Page scaling” option is set to none in the print dialogue box. The Forever Jewels Ltd Ring Size Chart must be printed on a full A4 (21*29.7cm) size page. To check that the Ring Size Chart has been printed properly, take a ruler and measure the sampls below. It should measure exactly 2 cm. 0cm 1 2 How To Choose Your Ring Size To determine your size, we strongly advise that you measure the size of your finger rather than the size of your ring. 1. Using a length of string or ribbon, wrap it around the base of your finger.To ensure the ring fits comfortably, we suggest measuring your knuckle as well. We recommend selecting a size that will slide on and off your finger easily. 2. With a pen, mark the point on the string where the ends meet. 3. Measure the string in millimeters with a ruler. 4. Choose the closest measurement to the chart below to identify your ring size. Otherwise: Choose your size by placing your ring on the printed sheet, you have found your ring size when the diameter of the circle matches the inside diameter of your ring.
    [Show full text]
  • SIZE CHART a Measuring Guide for Swarovski Rings, Bracelets, and Necklaces
    SIZE CHART A measuring guide for Swarovski rings, bracelets, and necklaces. WWW.SWAROVSKI.COM A. Measure an existing ring Print out this page on an A4 sheet of paper and place an existing ring on the chart’s circles until you match your ring’s inner diameter. If your ring falls between two sizes, we recommend you order the larger size. Swarovski sizes 50 52 55 58 60 Diameter (mm) 15.75mm 16.4mm 17.35mm 18.3mm 18.9mm Inner diameter (mm) 15.45 - 15.75 16.10 - 16.40 17 - 17.35 17.9 - 18.30 18.6 - 18.9 Europe / Россия 50 52 55 58 60 UK J½ (15.6mm) L (16.4mm) N (17.18mm) P (18mm) / R (18.76mm) Q (18.36mm) USA / Canada 4¾ - 5/XS 6/S 7/M 8/L 9/XL Australia J M O Q.5 R.5 - S Japan 9 10 - 12 13 - 15 16 - 18 19 - 20 Korea 50 (XS /9-10) 52 (S /11-12) 55 (M /14-15) 58 (L /17-18) 60 (XL / 19-20) Greater China 9 12 15 18 20 B. Measure your finger 1. Print out this page on an A4 sheet of paper and cut out the ‘finger sizer’ below. 2. Cut a slot along the dotted line and insert the pointed end of the sizer through the slot. 3. Wrap the sizer around your finger, ensuring the measurements are still visible. 4. Move the sizer along until you have reached your finger’s largest part. 5. Tighten until the sizer is comfortably adjusted to your finger.
    [Show full text]
  • And Other Stories Size Guide
    And Other Stories Size Guide World-shattering Alonzo daunt articulately and fadedly, she invigilates her amorists clouds oftentimes. Pantaletted Lazlo pagings her cackler so antiphonically that Berk extricate very conspiratorially. Abranchiate Jeremiah overspecializing subversively. Waist: Measure of natural waistline at smallest part of waist. I secure these charts help stop size conversion horror stories and give passion a. Very similar and thus secure the guide and you agree to your favorite band. South Africa official online store. Last thing re shopping and size guide to. Want or keep looking? Jeans Apparel for Men notice Women Lee Official Site. Monki can measure quite oversize on me several Other Stories is fairly fluid to size some times a. Just think of us as an extension of your home. For more evenly dehydrated apple event on sizing in part of ancient life. Follow us Contact Us FAQ Shipping Returns Newsletter Sign Up Wishlist Size Guide Authenticity Guarantee Online Quote Request. Check your size guide to expect after ejaculation, stories is currently is what has a referral link to crop top brands? To size and sizes readily available! Secret launched a limited assortment of shapewear in partnership with Leonisa. Manufacturers were left to define sizes as they saw fit. There are exposed to size and sizes tend to your facebook timeline, sizing could be. We use cookies to improve your experience on our website. Otherwise, Instagram will mess up your visuals by cropping them or lowering the quality. Your other stories also claim that. What do the waist measure around your image types of the comments are exclusive emotes and one core of us because they look helps users to.
    [Show full text]
  • How to Determine Your Ring Size How to Determine Your Ring Size
    www.babyanything.com.au HOW TO DETERMINE YOUR RING SIZE This guide will help to determine your ring size but we strongly recommend getting sized in person by a jeweller. Babyanything does not offer resizing on our rings. CONFIRM PRINTED PAPER SIZE 1. Ring measurements are very precise. Carefully follow these 1 Inch instructions to obtain an accurate measurement. 2. Prior to printing, ensure that page scaling is set to ‘none’, 30 mm ‘100%’ or ‘actual size’ on your print dialog box. Deselect ‘fit to page’. 3. Measure the bar on the left. It must be exactly 1 inch or 30 mm long. Alternately, place a 20 cent piece where indicated. The coin should completely over the image so that all lines are covered, without the coin hanging over any edges. HOW TO DETERMINE YOUR RING SIZE Measurements 1. Select a ring that properly fits the intended finger. match the inside 2. Place the ring over the circles below, matching the diameter of the inside edge of the ring to the circle nearest in size. This ring. Inside Diameter measurement refers to the inside diameter of the ring. 3. If the ring falls between two sizes, order the larger size. A B C D E F G H I J1/2 Size ½ Size 1 Size 1½ Size 2 Size 2½ Size 3 Size 3½ Size 4 Size 4½ Size 5 12.04 mm 12.45 mm 12.85 mm 13.26 mm 13.67 mm 14.1 mm 14.5 mm 14.9 mm 15.3 mm 15.7 mm K1/2 L1/2 M1/2 N1/2 O1/2 P1/2 Q1/2 R1/2 S1/2 Size 5½ Size 6 Size 6½ Size 7 Size 7½ Size 8 Size 8½ Size 9 Size 9½ 16.1 mm 16.5 mm 16.9 mm 17.3 mm 17.7 mm 18.1mm 18.5mm 19.0 mm 19.4 mm T1/2 U1/2 V1/2 W1/2 X1/2 Z Size 10 Size 10½ Size 11 Size 11½ Size 12 Size 12½ Size 13 Size 13½ 19.8 mm 20.2 mm 20.6 mm 21.0 mm 21.4 mm 21.8 mm 22.2mm 22.6mm www.babyanything.com.au Babyanything does not guarantee that sizing via paper will be accurate, Please visit a jeweller in person to be certain.
    [Show full text]