A Golden Rule Cabinetry

Phone: 352-302-0287 Email: [email protected]

A GOLDEN RULE CABINETRY

Ready to Assemble Kitchen Cabinet Catalog

Page 1 of 46 Brilliant White Shaker

6-way Adjustable, Concealed, European Soft Close Shipping Time: Ships in 3-10 business days Hinges: Hinges UV Coated Natural Interior (Prepped-for-glass Style: Shaker Cabinet Interior: cabinets will be finished to match the cabinet fronts) Face Frame: 3/4" x 1-3/4" Birch Center Stile: None (unless listed in the cabinet description) Premium HDF (HDF is used to avoid Door Frame: cracking/warping) Metal Clip or Glue & Staple: Cabinets come with Premium HDF (HDF is used to avoid Metal Clips (Cleats - not already installed on the Door Center: cracking/warping) Assembly Method: cabinets) that can be used to assemble or the cabinets can be Glued and Stapled. If Staple & Sides: 1/2" A-Grade Plywood Glued, clips will not be used 7 step, acid-catalyzed finish process with a UV Finish: Top & Bottom (Wall): 1/2" A-Grade Plywood coating

Bottom (Base): 1/2" A-Grade Plywood Toe Kick: 1/2" Plywood

Back Panel: 1/2" A-Grade Plywood Full Back Installation Rail: None Wall Cabinet Bottoms Yes Shelves: Adjustable 3/4" w/Front Edge Banding Finished (Exterior):

Base Cabinet Shelf Depth: 1/2 CARB Compliant: Yes 5/8" solid hardwood, dovetailed drawer box, Doors come pre-drilled for the hinges, the face Drawer Box: 5/16" Plywood Drawer Box Bottom, 5-Piece Door Hinges: frame has marks where to drill and the customer drawer front construction chooses Right or Left during assembly. Yes, but there will be a small gap when two cabinets Toe Kicks Included w/Base Drawer Glides: Undermount, Full Extension, Soft Close Glides are side by side, so the TKC (8' toe kick) is needed if Cabinets: cabinets are next to each other. Base Corner Supports: 3/4" Solid Wood Corner Blocks Sides Panels Finished: Yes

Overlay: Full

Page 2 of 46 Providence White

Shipping Time: This finish ships in 5-15 business days Cabinet Interior: Matches door finish

Style: Recessed Square Center Stile: No center stile on cabinetry 24"W to 36"W

Face Frame: 3/4" Solid Birch Assembly Method: Steel Clip Door Frame: 3/4” Solid Birch Finish: Waterborne UV Finish Door Center: MDF (MDF is used to avoid cracking/warping) Toe Kick: 1/2" Plywood Sides: 1/2" A-Grade plywood with wood veneer Installation Rail: 1/2" Plywood Top & Bottom (Wall): 1/2" A-Grade plywood with wood veneer Wall Cabinet Bottoms Yes Bottom (Base): 3/8" A-Grade plywood with wood veneer Finished (Exterior): CARB Compliant: Yes Back Panel: 1/2" Picture Frame recess style Hinged To The Right By Default. For Wall Cabinets Shelves: 3/4 " A-Grade plywood with wood veneer The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Door Hinges: Base Cabinet Shelf Depth: 1/2 Opposite Side To Re-Hinge, And Then Fill The Solid Wood 17mm (close to 3/4") sides, Drawer Original Holes (Touch Up Kit Can Be Purchased For Drawer Box: bottom 1/2" plywood, Drawer length 21". This) Toe Kicks Included w/Base Dovetail construction, Natural finish. Yes Undermount, full extension with soft closing Cabinets: Drawer Glides: feature Sides Panels Finished: Yes Wood corner brackets with wood I-beam Base Corner Supports: construction For this full overlay door style, if a cabinet side is being installed against a wall, a narrow clearance Overlay: Full with Butt doors Installation Note: may be necessary, depending on the decorative Concealed 6-way adjustable with Soft Closing hardware that is being used, to make sure the Hinges: cabinet door opens properly. Feature

Page 3 of 46 Dakota White

Shipping Time: This finish ships in 5-15 business days Cabinet Interior: Matches door finish

Style: Raised Square Center Stile: No center stile on cabinetry 24"W to 36"W

Page 4 of 46 Aspen White Shaker

Shipping Time: This finish ships in 5-15 business days Cabinet Interior: Matches door finish

Style: Shaker Center Stile: No center stile on cabinetry 24"W to 36"W

Face Frame: 3/4” Solid Birch Assembly Method: Steel Clip Door Frame: MDF (MDF is used to avoid cracking/warping) Finish: Polyurethane Finish Door Center: MDF (MDF is used to avoid cracking/warping) Toe Kick: 1/2" Plywood Sides: 1/2" A-Grade plywood with wood veneer Installation Rail: 1/2" Plywood Top & Bottom (Wall): 1/2" A-Grade plywood with wood veneer Wall Cabinet Bottoms Yes Bottom (Base): 3/8" A-Grade plywood with wood veneer Finished (Exterior): CARB Compliant: Yes Back Panel: 1/2" Picture Frame recess style Hinged To The Right By Default. For Wall Cabinets Shelves: 3/4 " A-Grade plywood with wood veneer The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Door Hinges: Base Cabinet Shelf Depth: ½ Opposite Side To Re-Hinge, And Then Fill The Solid Wood 17mm (close to 3/4") sides, Drawer Original Holes (Touch Up Kit Can Be Purchased For Drawer Box: bottom 1/2" plywood, Drawer length 21". This) Toe Kicks Included w/Base Dovetail construction, Natural finish. Yes Undermount, full extension with soft closing Cabinets: Drawer Glides: feature Sides Panels Finished: Yes Wood corner brackets with wood I-beam Base Corner Supports: construction For this full overlay door style, if a cabinet side is being installed against a wall, a narrow clearance Overlay: Full with butt doors Installation Note: may be necessary, depending on the decorative Concealed 6-way adjustable with Soft Closing hardware that is being used, to make sure the Hinges: cabinet door opens properly. Feature

Page 5 of 46

Lakewood White

6-way Adjustable, Concealed, European Soft Close Shipping Time: Ships in 3-10 business days Hinges: Hinges UV Coated Natural Interior (Prepped-for-glass Style: Raised Cabinet Interior: cabinets will be finished to match the cabinet fronts) Face Frame: 3/4" x 1-3/4" Birch Center Stile: None (unless listed in the cabinet description) Premium HDF (HDF is used to avoid Door Frame: cracking/warping) Metal Clip or Glue & Staple: Cabinets come with Premium HDF (HDF is used to avoid Metal Clips (Cleats - not already installed on the Door Center: cracking/warping) Assembly Method: cabinets) that can be used to assemble or the cabinets can be Glued and Stapled. If Staple & Sides: 1/2" A-Grade Plywood Glued, clips will not be used 7 step, acid-catalyzed finish process with a UV Finish: Top & Bottom (Wall): 1/2" A-Grade Plywood coating

Bottom (Base): 1/2" A-Grade Plywood Toe Kick: 1/2" Plywood

Back Panel: 1/2" A-Grade Plywood Full Back Installation Rail: None Wall Cabinet Bottoms Yes Shelves: Adjustable 3/4" w/Front Edge Banding Finished (Exterior):

Overlay: Full

Page 6 of 46

Charlotte White

Shipping Time: Ships in 3-7 business days Hinges: Soft-close

Style: Recessed Cabinet Interior: Clear coated natural maple interior

Face Frame: 3/4" x 1-1/2" Solid Wood Center Stile: None

Door Frame: Solid Maple Assembly Method: Nail/Screw/Glue

Door Center: MDF (MDF is used to avoid cracking/warping) Finish: Oil based finish

Sides: 1/2" Plywood Toe Kick: 1/2" thick, edge banded

Top & Bottom (Wall): 1/2" Plywood Installation Rail: 3/4" thick x 1-1/2" wide

Base Cabinet Shelf Depth: 18” Dovetail drawer boxes, 1/2" thick solid wood side Drawer Box: panels

Drawer Glides: Full extension, soft closing, undermount glides

Base Corner Supports: Metal bracket reinforced corners

Overlay: Full

Page 7 of 46 Arctic White Shaker

6-way Adjustable, Concealed European Hinges (soft Shipping Time: Ships in 3-5 business days Hinges: close upgrade available) UV Coated Natural Interior (Prepped-for-glass Style: Shaker Cabinet Interior: cabinets will be finished to match the cabinet fronts) Face Frame: 3/4" x 1-3/4" Birch Center Stile: None (unless listed in the cabinet description) Door Frame: HDF (HDF is used to avoid cracking/warping) Metal Clip or Glue & Staple: Cabinets come with Metal Clips (Cleats - not already installed on the Door Center: HDF (HDF is used to avoid cracking/warping) Assembly Method: cabinets) that can be used to assemble or the cabinets can be Glued and Stapled. If Staple & Sides: 1/2" A-Grade Plywood Glued, clips will not be used 7 step, acid-catalyzed finish process with a UV Finish: Top & Bottom (Wall): 1/2" A-Grade Plywood coating and brushed glaze

Bottom (Base): 1/2" A-Grade Plywood Toe Kick: 1/2" Plywood

Back Panel: 1/2" A-Grade Plywood Full Back Installation Rail: None Wall Cabinet Bottoms Yes Shelves: Adjustable 3/4" w/Front Edge Banding Finished (Exterior):

Base Cabinet Shelf Depth: 1/2 CARB Compliant: Yes 5/8" solid hardwood, dovetailed drawer box, Doors come pre-drilled for the hinges, the face Drawer Box: 5/16" Plywood Drawer Box Bottom, 5-Piece Door Hinges: frame has marks where to drill and the customer drawer front construction chooses Right or Left during assembly. Yes, but the SS-TKC (8' toe kick) is needed for all Drawer Glides: Undermount, Epoxy Drawer Glides Toe Kicks Included w/Base base cabinets to cover the unfinished sides since Cabinets: the included toe kick fits in between the plywood Base Corner Supports: 3/4" Solid Wood Corner Blocks side panels

Overlay: Full Sides Panels Finished: Yes

Page 8 of 46

Southport White Shaker

Shipping Time: Ships in 3-7 business days Hinges: Soft-close

Style: Shaker Cabinet Interior: Clear coated natural maple interior

Face Frame: 3/4" x 1-1/2" Solid Wood Center Stile: None

Door Frame: Solid Maple Assembly Method: Nail/Screw/Glue

Door Center: MDF (MDF is used to avoid cracking/warping) Finish: Oil based finish

Sides: 1/2" Plywood Toe Kick: 1/2" thick, edge banded

Top & Bottom (Wall): 1/2" Plywood Installation Rail: 3/4" thick x 1-1/2" wide

Bottom (Base): 1/2" Plywood CARB Compliant: Yes 3" wide x 3/4" thick picture frame back with 1/4" Back Panel: Door Hinges: Doors can be flipped for a left or right assembly plywood center Shelves: 3/4" plywood, adjustable, metal shelf rests Sides Panels Finished: Yes Scribe needs to be used for a wall cabinet against a Base Cabinet Shelf Depth: 18” wall or deeper cabinet/appliance. For base cabinets, Design Note: Dovetail drawer boxes, 1/2" thick solid wood side leave use at least 3/4" to a 1" filler if base molding Drawer Box: is being used, if not, then scribe is sufficient panels

Drawer Glides: Full extension, soft closing, undermount glides

Base Corner Supports: Metal bracket reinforced corners

Overlay: Full

Page 9 of 46 Regency White

Shipping Time: This finish ships in 5-15 business days Cabinet Interior: Matches door finish

Style: Raised Square (5pc recessed drawer header) Center Stile: No center stile on cabinetry 24"W to 36"W

Face Frame: 3/4” Solid Birch Assembly Method: Steel Clip Door Frame: MDF (MDF is used to avoid cracking/warping) Finish: Polyurethane Finish with Glaze (Except KT) Door Center: MDF (MDF is used to avoid cracking/warping) Toe Kick: 1/2" Plywood Sides: 1/2" A-Grade plywood with wood veneer Installation Rail: 1/2" Plywood Top & Bottom (Wall): 1/2" A-Grade plywood with wood veneer Wall Cabinet Bottoms Yes Bottom (Base): 1/2" A-Grade plywood with wood veneer Finished (Exterior): CARB Compliant: Yes Back Panel: 1/2" Picture Frame recess style Hinged To The Right By Default. For Wall Cabinets Shelves: 3/4 " A-Grade plywood with wood veneer The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Door Hinges: Base Cabinet Shelf Depth: 1/2 Opposite Side To Re-Hinge, And Then Fill The Solid Wood 3/5” sides, Drawer bottom 1/2” Original Holes (Touch Up Kit Can Be Purchased For Drawer Box: plywood, Drawer length 21, Dovetail This) Toe Kicks Included w/Base construction, Natural finish. Yes Cabinets: Drawer Glides: Epoxy coated metal undermount Sides Panels Finished: Yes Base Corner Supports: Plastic corner brackets For this full overlay door style, if a cabinet side is being installed against a wall, a narrow clearance Overlay: Full with Butt doors Installation Note: may be necessary, depending on the decorative Hinges: Concealed 6-way adjustable hardware that is being used, to make sure the

cabinet door opens properly.

Page 10 of 46 Signature Vanilla Glaze

Shipping Time: This finish ships in 5-15 business days Cabinet Interior: Matches door finish

Style: Raised Square Center Stile: No center stile on cabinetry 24"W to 36"W

Face Frame: 3/4" Solid Birch Assembly Method: Steel Clip Door Frame: 3/4” Solid Birch Finish: Waterborne UV Finish with Glaze Door Center: MDF (MDF is used to avoid cracking/warping) Toe Kick: 1/2" Plywood Sides: 1/2" A-Grade plywood with wood veneer Installation Rail: 1/2" Plywood Top & Bottom (Wall): 1/2" A-Grade plywood with wood veneer Wall Cabinet Bottoms Yes Bottom (Base): 3/8" A-Grade plywood with wood veneer Finished (Exterior): CARB Compliant: Yes Back Panel: 1/2" Picture Frame recess style Hinged To The Right By Default. For Wall Cabinets Shelves: 3/4 " A-Grade plywood with wood veneer The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Door Hinges: Base Cabinet Shelf Depth: 1/2 Opposite Side To Re-Hinge, And Then Fill The Solid Wood 17mm (close to 3/4") sides, Drawer Original Holes (Touch Up Kit Can Be Purchased For Drawer Box: bottom 1/2" plywood, Drawer length 21". This) Toe Kicks Included w/Base Dovetail construction, Natural finish. Yes Undermount, full extension with soft closing Cabinets: Drawer Glides: feature Sides Panels Finished: Yes Wood corner brackets with wood I-beam Base Corner Supports: construction For this full overlay door style, if a cabinet side is being installed against a wall, a narrow clearance Overlay: Full with Butt doors Installation Note: may be necessary, depending on the decorative Concealed 6-way adjustable with Soft Closing hardware that is being used, to make sure the Hinges: cabinet door opens properly. Feature

Page 11 of 46 Linen Shaker

Bottom (Base): 1/2" A-Grade Plywood Toe Kick: 1/2" Plywood

Back Panel: 1/2" A-Grade Plywood Full Back Installation Rail: None Wall Cabinet Bottoms Yes Shelves: Adjustable 3/4" w/Front Edge Banding Finished (Exterior):

Page 12 of 46 French Vanilla Glaze

This finish ships in 2-6 weeks (please note that Natural Maple (Glass Door Cabinets will have Shipping Time: Cabinet Interior: smaller orders may ship out sooner) matching interiors) Style: Raised Panel Center Stile: None

Face Frame: 3/4" Solid Maple Assembly Method: Staple/Nail/Glue

Door Frame: 3/4" Solid Maple Finish: Hand Applied Stain and Glaze

Door Center: Solid Maple Toe Kick: 1/2" Solid Maple

Sides: 1/2"Plywood Installation Rail: None Wall Cabinet Bottoms Top & Bottom (Wall): 1/2" Plywood No - Top And Bottom Are Unfinished Plywood Finished (Exterior): Bottom (Base): 1/2" Plywood CARB Compliant: Yes 1/2" Plywood (Sink Base/Vanity Cabinets - except Pre-Drilled To The Right - Wall Cabinets Can Be Back Panel: vanity drawer bases - do not have back panels Flipped, Base Cabinets Will Have To Have The but do have hanging rails) Door Hinges: Hinges Moved To The Opposite Side. Holes Can Be 5/8" Thick Plywood, Adjustable with Metal Shelf Shelves: Filled If Preferred, But They Will Only Be Visible Rests When The Door Is Open. Toe Kicks Included w/Base Base Cabinet Shelf Depth: 1/2 Yes Cabinets: Dovetail, 1/2" Thick Solid Wood Sides, 3/8" Drawer Box: Plywood Bottoms Sides Panels Finished: Yes Full Extension, Undermounted, Soft Close, Steel Drawer Glides: For this full overlay door style, if a cabinet is being Concealed Drawer Glides installed against a wall, a 1/2" clearance is Base Corner Supports: Metal Bracket Reinforcements for Base Cabinets recommended between the wall and side of the Installation Note: cabinet to allow the door to open properly. Scribe Overlay: Full molding can usually be used for very narrow spaces, however, only choose that option if the design Soft Close, 4-6 Way Adjustable European doesn't allow for a 1/2" clearance. Hinges: Concealed Metal Hinges

Page 13 of 46 Casselton Ivory

Shipping Time: Ships in 3-7 business days Hinges: Soft-close

Style: Raised Cabinet Interior: Clear coated natural maple interior

Face Frame: 3/4" x 1-1/2" Solid Wood Center Stile: None

Door Frame: Solid Maple Assembly Method: Nail/Screw/Glue

Door Center: MDF (MDF is used to avoid cracking/warping) Finish: Oil based finish

Sides: 1/2" Plywood Toe Kick: 1/2" thick, edge banded

Top & Bottom (Wall): 1/2" Plywood Installation Rail: 3/4" thick x 1-1/2" wide

Drawer Glides: Full extension, soft closing, undermount glides

Base Corner Supports: Metal bracket reinforced corners

Overlay: Full

Page 14 of 46 Phoenix Cream Glaze

Shipping Time: Ships in 3-7 business days Hinges: Soft-close

Style: Raised Cabinet Interior: Clear coated natural maple interior

Face Frame: 3/4" x 1-1/2" Solid Wood Center Stile: None

Door Frame: Solid Maple Assembly Method: Nail/Screw/Glue

Door Center: MDF (MDF is used to avoid cracking/warping) Finish: Oil based finish

Sides: 1/2" Plywood Toe Kick: 1/2" thick, edge banded

Top & Bottom (Wall): 1/2" Plywood Installation Rail: 3/4" thick x 1-1/2" wide

Drawer Glides: Full extension, soft closing, undermount glides

Base Corner Supports: Metal bracket reinforced corners

Overlay: Full

Page 15 of 46

Cambridge Antique White Glaze

6-way Adjustable, Concealed, European Soft Close Shipping Time: Ships in 3-5 business days Hinges: Hinges UV Coated Natural Interior (Prepped-for-glass Style: Raised Square Cabinet Interior: cabinets will be finished to match the cabinet fronts) Face Frame: 3/4" x 1-3/4" Birch Center Stile: None (unless listed in the cabinet description) Door Frame: 3/4" Solid Birch, Mitered Doors Metal Clip or Glue & Staple: Cabinets come with Premium MDF (MDF is used to avoid Metal Clips (Cleats - not already installed on the Door Center: cracking/warping) Assembly Method: cabinets) that can be used to assemble or the cabinets can be Glued and Stapled. If Staple & Sides: 1/2" A-Grade Plywood Glued, clips will not be used 7 step, acid-catalyzed finish process with a UV Finish: Top & Bottom (Wall): 1/2" A-Grade Plywood coating and brushed glaze

Bottom (Base): 1/2" A-Grade Plywood Toe Kick: 1/2" Plywood

Back Panel: 1/2" A-Grade Plywood Full Back Installation Rail: None Wall Cabinet Bottoms Yes Shelves: Adjustable 3/4" w/Front Edge Banding Finished (Exterior):

Overlay: Full

Page 16 of 46 Brantley Antique White Glaze

6-way Adjustable, Concealed, European Soft Close Shipping Time: Ships in 3-5 business days Hinges: Hinges UV Coated Natural Interior (Prepped-for-glass Style: Recessed Panel Cabinet Interior: cabinets will be finished to match the cabinet fronts) Face Frame: 3/4" x 1-3/4" Birch Center Stile: None (unless listed in the cabinet description) Door Frame: 3/4" Solid Birch, Mitered Doors Metal Clip or Glue & Staple: Cabinets come with Premium MDF (MDF is used to avoid Metal Clips (Cleats - not already installed on the Door Center: cracking/warping) Assembly Method: cabinets) that can be used to assemble or the cabinets can be Glued and Stapled. If Staple & Sides: 1/2" A-Grade Plywood Glued, clips will not be used 7 step, acid-catalyzed finish process with a UV Finish: Top & Bottom (Wall): 1/2" A-Grade Plywood coating and brushed glaze

Bottom (Base): 1/2" A-Grade Plywood Toe Kick: 1/2" Plywood

Back Panel: 1/2" A-Grade Plywood Full Back Installation Rail: None Wall Cabinet Bottoms Yes Shelves: Adjustable 3/4" w/Front Edge Banding Finished (Exterior):

Page 17 of 46 Lakewood Stone

Bottom (Base): 1/2" A-Grade Plywood Toe Kick: 1/2" Plywood

Back Panel: 1/2" A-Grade Plywood Full Back Installation Rail: None Wall Cabinet Bottoms Yes Shelves: Adjustable 3/4" w/Front Edge Banding Finished (Exterior):

Overlay: Full

Page 18 of 46 Stone Shaker

UV Coated Natural Interior (Prepped-for-glass Shipping Time: Ships in 3-7 business days Cabinet Interior: cabinets will be finished to match the cabinet fronts) Style: Shaker Center Stile: None (unless listed in the cabinet description) Face Frame: 3/4" x 1-3/4" Birch Metal Clip or Glue & Staple: Cabinets come with Metal

Door Frame: 3/4" HDF (HDF is used to avoid cracking/warping) Clips (Cleats - not already installed on the cabinets) Assembly Method: that can be used to assemble or the cabinets can be Door Center: HDF (HDF is used to avoid cracking/warping) Glued and Stapled. If Staple & Glued, clips will not be

Sides: 1/2" A-Grade Plywood used Finish: 7 step, acid-catalyzed finish process with a UV coating Top & Bottom (Wall): 1/2" A-Grade Plywood Toe Kick: 1/2" Plywood Bottom (Base): 1/2" A-Grade Plywood Installation Rail: None Back Panel: 1/2" A-Grade Plywood Full Back Wall Cabinet Bottoms Finished Shelves: Adjustable 3/4" w/Front Edge Banding Yes (Exterior):

Base Cabinet Shelf Depth: 1/2 CARB Compliant: Yes

5/8" solid hardwood, dovetailed drawer box, 5/16" Doors come pre-drilled for the hinges, the face frame Drawer Box: Plywood Drawer Box Bottom, 5-Piece drawer front Door Hinges: has marks where to drill and the customer chooses construction Right or Left during assembly. Drawer Glides: Undermount, Full Extension, Soft Close Glides Yes, but there will be a small gap when two cabinets Toe Kicks Included are side by side, so the TKC (8' toe kick) is needed if Base Corner Supports: 3/4" Solid Wood Corner Blocks w/Base Cabinets: cabinets are next to each other.

Overlay: Full Sides Panels Finished: Yes

6-way Adjustable, Concealed, European Soft Close Cabinet specs are subject to change without notice. Hinges: Hinges *Cabinet measurements are typically converted from

metric to inches and manufacturers will commonly Installation/Designer Note: round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards*

Page 19 of 46 Charlotte Grey

Shipping Time: Ships in 3-7 business days Hinges: Soft-close

Style: Recessed Cabinet Interior: Clear coated natural maple interior

Face Frame: 3/4" x 1-1/2" Solid Wood Center Stile: None

Door Frame: Solid Maple Assembly Method: Nail/Screw/Glue

Door Center: MDF (MDF is used to avoid cracking/warping) Finish: Oil based finish

Sides: 1/2" Plywood Toe Kick: 1/2" thick, edge banded

Top & Bottom (Wall): 1/2" Plywood Installation Rail: 3/4" thick x 1-1/2" wide

Base Cabinet Shelf Depth: 18” Dovetail drawer boxes, 1/2" thick solid wood side Drawer Box: panels

Drawer Glides: Full extension, soft closing, undermount glides

Base Corner Supports: Metal bracket reinforced corners

Overlay: Full

Page 20 of 46 Heather Grey Shaker

Shipping Time: This finish ships in 5-15 business days Cabinet Interior: Matches door finish

Style: Shaker Center Stile: No center stile on cabinetry 24"W to 36"W

Face Frame: 3/4” Solid Eucalyptus Grandis Assembly Method: Steel Clip Door Frame: 3/4” Solid Eucalyptus Grandis Finish: Waterborne UV Finish Door Center: 13/16” Solid Eucalyptus Grandis Toe Kick: 1/2" Plywood Sides: 1/2" A-Grade plywood with wood veneer Installation Rail: 1/2" Plywood Top & Bottom (Wall): 1/2" A-Grade plywood with wood veneer Wall Cabinet Bottoms Yes Bottom (Base): 3/8" A-Grade plywood with wood veneer Finished (Exterior): Wall Cabinets: 1/2” Picture Frame recess style. CARB Compliant: Yes Back Panel: Most Base Cabinets: 1/2” FULL Back (some base Hinged To The Right By Default. For Wall Cabinets cabinets will have a picture frame recessed back) The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Shelves: 3/4 " A-Grade plywood with wood veneer Door Hinges: Opposite Side To Re-Hinge, And Then Fill The Base Cabinet Shelf Depth: 1/2 Original Holes (Touch Up Kit Can Be Purchased For This) Solid Wood 17mm (close to 3/4") sides, Drawer Toe Kicks Included w/Base Drawer Box: bottom 1/2" plywood, Drawer length 21". Yes Cabinets: Dovetail construction, Natural finish. Undermount, full extension with soft closing Drawer Glides: Sides Panels Finished: Yes feature Wood corner brackets with wood I-beam For this full overlay door style, if a cabinet side is Base Corner Supports: construction being installed against a wall, a narrow clearance Installation Note: may be necessary, depending on the decorative Overlay: Full with Butt doors hardware that is being used, to make sure the cabinet door opens properly. Concealed 6-way adjustable with Soft Closing Hinges: Feature

Page 21 of 46 Grey Shaker

6-way Adjustable, Concealed, European Soft Close Shipping Time: Ships in 3-5 business days Hinges: Hinges UV Coated Natural Interior (Prepped-for-glass Style: Shaker Cabinet Interior: cabinets will be finished to match the cabinet fronts) Face Frame: 3/4" x 1-3/4" Birch Center Stile: None (unless listed in the cabinet description) Door Frame: 3/4" Solid Birch Metal Clip or Glue & Staple: Cabinets come with Premium MDF (MDF is used to avoid Metal Clips (Cleats - not already installed on the Door Center: cracking/warping) Assembly Method: cabinets) that can be used to assemble or the cabinets can be Glued and Stapled. If Staple & Sides: 1/2" A-Grade Plywood Glued, clips will not be used 7 step, acid-catalyzed finish process with a UV Finish: Top & Bottom (Wall): 1/2" A-Grade Plywood coating

Bottom (Base): 1/2" A-Grade Plywood Toe Kick: 1/2" Plywood

Back Panel: 1/2" A-Grade Plywood Full Back Installation Rail: None Wall Cabinet Bottoms Yes Shelves: Adjustable 3/4" w/Front Edge Banding Finished (Exterior):

Page 22 of 46 Natural Grey Shaker

Shipping Time: This finish ships in 5-15 business days Cabinet Interior: Matches door finish

Style: Shaker Center Stile: No center stile on cabinetry 24"W to 36"W

Face Frame: 3/4" Solid Birch Assembly Method: Steel Clip Door Frame: 3/4” Solid Maple Finish: Waterborne UV Finish MDF (MDF is used to avoid cracking/warping) Door Center: with a maple veneer Toe Kick: 1/2" Plywood Sides: 1/2" A-Grade plywood with wood veneer Installation Rail: 1/2" Plywood Top & Bottom (Wall): 1/2" A-Grade plywood with wood veneer Wall Cabinet Bottoms Yes Finished (Exterior): Bottom (Base): 3/8" A-Grade plywood with wood veneer CARB Compliant: Yes Back Panel: 1/2" Picture Frame recess style Hinged To The Right By Default. For Wall Cabinets Shelves: 3/4 " A-Grade plywood with wood veneer The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Door Hinges: Base Cabinet Shelf Depth: 1/2 Opposite Side To Re-Hinge, And Then Fill The Original Holes (Touch Up Kit Can Be Purchased For Solid Wood 17mm (close to 3/4") sides, Drawer This) Drawer Box: bottom 1/2" plywood, Drawer length 21". Toe Kicks Included w/Base Dovetail construction, Natural finish. Yes Cabinets: Undermount, full extension with soft closing Drawer Glides: feature Sides Panels Finished: Yes Wood corner brackets with wood I-beam Base Corner Supports: construction For this full overlay door style, if a cabinet side is being installed against a wall, a narrow clearance Overlay: Full with Butt doors Installation Note: may be necessary, depending on the decorative Concealed 6-way adjustable with Soft Closing hardware that is being used, to make sure the Hinges: cabinet door opens properly. Feature

Page 23 of 46 Providence Grey

Shipping Time: This finish ships in 5-15 business days Cabinet Interior: Matches door finish

Style: Recessed square Center Stile: No center stile on cabinetry 24"W to 36"W

Face Frame: 3/4” Solid Eucalyptus Grandis Assembly Method: Steel Clip Door Frame: 3/4” Solid Eucalyptus Grandis Finish: Waterborne UV Finish Door Center: 1/2” Solid Eucalyptus Grandis Toe Kick: 1/2" Plywood Sides: 1/2" A-Grade plywood with wood veneer Installation Rail: 1/2" Plywood Top & Bottom (Wall): 1/2" A-Grade plywood with wood veneer Wall Cabinet Bottoms Yes Bottom (Base): 3/8" A-Grade plywood with wood veneer Finished (Exterior): Wall Cabinets: 1/2” Picture Frame recess style. CARB Compliant: Yes Back Panel: Most Base Cabinets: 1/2” FULL Back (some base Hinged To The Right By Default. For Wall Cabinets cabinets will have a picture frame recessed back) The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Shelves: 3/4 " A-Grade plywood with wood veneer Door Hinges: Opposite Side To Re-Hinge, And Then Fill The Base Cabinet Shelf Depth: 1/2 Original Holes (Touch Up Kit Can Be Purchased For This) Solid Wood 17mm (close to 3/4") sides, Drawer Toe Kicks Included w/Base Drawer Box: bottom 1/2" plywood, Drawer length 21". Yes Dovetail construction, Natural finish. Cabinets: Undermount, full extension with soft closing Drawer Glides: Sides Panels Finished: Yes feature Wood corner brackets with wood I-beam For this full overlay door style, if a cabinet side is Base Corner Supports: construction being installed against a wall, a narrow clearance Installation Note: may be necessary, depending on the decorative Overlay: Full with Butt doors hardware that is being used, to make sure the cabinet door opens properly. Concealed 6-way adjustable with Soft Closing Hinges: Feature

Page 24 of 46 Harvest Oak

Shipping Time: This finish ships in 5-15 business days Cabinet Interior: Matches door finish

Style: Raised Square (5 piece decor header) Center Stile: No center stile on cabinetry 24"W to 36"W

Face Frame: 3/4” Solid Wood Assembly Method: Steel Clip Door Frame: 3/4” Solid Oak Finish: Polyurethane Finish MDF with Oak Veneer (MDF is used to avoid Door Center: cracking/warping) Toe Kick: 1/2" Plywood Sides: 1/2" A-Grade plywood with wood veneer Installation Rail: 1/2" Plywood Top & Bottom (Wall): 1/2" A-Grade plywood with wood veneer Wall Cabinet Bottoms Yes Finished (Exterior): Bottom (Base): 1/2" A-Grade plywood with wood veneer CARB Compliant: Yes Back Panel: 1/2" Picture Frame recess style Hinged To The Right By Default. For Wall Cabinets Shelves: 3/4 " A-Grade plywood with wood veneer The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Door Hinges: Base Cabinet Shelf Depth: 1/2 Opposite Side To Re-Hinge, And Then Fill The Original Holes (Touch Up Kit Can Be Purchased For Solid Wood 3/5" sides, Drawer bottom 1/2" This) Drawer Box: plywood, Drawer length 21". Rabbet joint Toe Kicks Included w/Base construction, Natural Oak finish. Yes Cabinets: Drawer Glides: Epoxy coated metal side mount Sides Panels Finished: Yes Base Corner Supports: Plastic corner brackets For this full overlay door style, if a cabinet side is being installed against a wall, a narrow clearance Overlay: Full with butt doors Installation Note: may be necessary, depending on the decorative hardware that is being used, to make sure the Hinges: Concealed 6-way adjustable

cabinet door opens properly.

Page 25 of 46 Shaker Honey

Shipping Time: This finish ships in 5-15 business days Cabinet Interior: Matches door finish

Style: Shaker Center Stile: No center stile on cabinetry 24"W to 36"W

Face Frame: 3/4” Solid Birch Assembly Method: Steel Clip Door Frame: 3/4” Solid Birch Finish: Waterborne UV Finish from Sherwin Williams MDF with Birch Veneer (MDF is used to avoid Door Center: cracking/warping) Toe Kick: 1/2" Plywood Sides: 1/2" A-Grade plywood with wood veneer Installation Rail: 1/2" Plywood Top & Bottom (Wall): 1/2" A-Grade plywood with wood veneer Wall Cabinet Bottoms Yes Finished (Exterior): Bottom (Base): 3/8" A-Grade plywood with wood veneer CARB Compliant: Yes Back Panel: 1/2" Picture Frame recess style Hinged To The Right By Default. For Wall Cabinets Shelves: 3/4 " A-Grade plywood with wood veneer The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Door Hinges: Base Cabinet Shelf Depth: 1/2 Opposite Side To Re-Hinge, And Then Fill The Original Holes (Touch Up Kit Can Be Purchased For Solid Wood 17mm (close to 3/4") sides, Drawer This) Drawer Box: bottom 1/2" plywood, Drawer length 21". Toe Kicks Included w/Base Dovetail construction, Natural finish. Yes Cabinets: Undermount, full extension with soft closing Drawer Glides: feature Sides Panels Finished: Yes Wood corner brackets with wood I-beam Base Corner Supports: construction For this full overlay door style, if a cabinet side is being installed against a wall, a narrow clearance Overlay: Full with butt doors Installation Note: may be necessary, depending on the decorative Concealed 6-way adjustable with Soft Closing hardware that is being used, to make sure the Hinges: cabinet door opens properly. Feature

Page 26 of 46 Pecan Shaker

6-way Adjustable, Concealed European Hinges (soft Shipping Time: Ships in 3-5 business days Hinges: close upgrade available) UV Coated Natural Interior (Prepped-for-glass Style: Shaker Cabinet Interior: cabinets will be finished to match the cabinet fronts) Face Frame: 3/4" x 1-3/4" Birch Center Stile: None (unless listed in the cabinet description) Door Frame: 3/4" Solid Birch, Mortise & Tenon Doors Metal Clip or Glue & Staple: Cabinets come with Veneered MDF Center Panel (MDF is used to Metal Clips (Cleats - not already installed on the Door Center: avoid cracking/warping) Assembly Method: cabinets) that can be used to assemble or the cabinets can be Glued and Stapled. If Staple & Sides: 1/2" A-Grade Plywood Glued, clips will not be used 7 step, acid-catalyzed finish process with a UV Finish: Top & Bottom (Wall): 1/2" A-Grade Plywood coating and brushed glaze

Bottom (Base): 1/2" A-Grade Plywood Toe Kick: 1/2" Plywood

Back Panel: 1/2" A-Grade Plywood Full Back Installation Rail: None Wall Cabinet Bottoms Yes Shelves: Adjustable 3/4" w/Front Edge Banding Finished (Exterior):

Base Cabinet Shelf Depth: 1/2 CARB Compliant: Yes 5/8" solid hardwood, dovetailed drawer box, Doors come pre-drilled for the hinges, the face Drawer Box: 5/16" Plywood Drawer Box Bottom, 5-Piece Door Hinges: frame has marks where to drill and the customer drawer front construction chooses Right or Left during assembly. Yes, but the SS-TKC (8' toe kick) is needed for all Drawer Glides: Undermount, Epoxy Drawer Glides Toe Kicks Included w/Base base cabinets to cover the unfinished sides since Cabinets: the included toe kick fits in between the plywood Base Corner Supports: 3/4" Solid Wood Corner Blocks side panels

Overlay: Full Sides Panels Finished: Yes

Page 27 of 46 Glazed Toffee

This finish ships in 2-6 weeks (please note that Full Extension, Undermounted, Soft Close, Steel Shipping Time: Drawer Box: smaller orders may ship out sooner) Concealed Drawer Glides Wood Species Maple Drawer Glides: Undermount & Soft Close Wall Cabinet Bottoms Face Frame: 3/4" Solid Maple No - Top And Bottom Are Unfinished Plywood Finished (Exterior): Door Frame: 3/4" Solid Maple CARB Compliant: Yes

Door Center: 3/4" Solid Maple Pre-Drilled To The Right - Wall Cabinets Can Be Flipped, Base Cabinets Will Have To Have The Door Style: Raised Panel Door Hinges: Hinges Moved To The Opposite Side. Holes Can Be Filled If Preferred, But They Will Only Be Visible Overlay: Full When The Door Is Open. Toe Kicks Included w/Base Yes Side & Top/Bottom: 1/2" Plywood with Maple Veneer Cabinets: 1/2" Plywood (Sink Base/Vanity Cabinets - except Sides Panels Finished: Yes Back Panel: vanity drawer bases - do not have back panels but do have hanging rails) For this full overlay door style, if a cabinet is being installed against a wall, a 1/2" clearance is Shelves: 5/8" Plywood recommended between the wall and side of the Soft Close, 4-6 Way Adjustable European Installation Note: cabinet to allow the door to open properly. Scribe Hinges: Concealed Metal Hinges molding can usually be used for very narrow spaces,

however, only choose that option if the design doesn't allow for a 1/2" clearance.

Page 28 of 46 Regency Spiced Glaze

Shipping Time: This finish ships in 5-15 business days Cabinet Interior: Matches door finish

Style: Raised Square (5pc recessed drawer header) Center Stile: No center stile on cabinetry 24"W to 36"W

Face Frame: 3/4” Solid Birch Assembly Method: Steel Clip Door Frame: 3/4” Solid Birch Finish: Polyurethane Finish with Glaze (Except KT) MDF with Birch Veneer (MDF is used to avoid Door Center: cracking/warping) Toe Kick: 1/2" Plywood Sides: 1/2" A-Grade plywood with wood veneer Installation Rail: 1/2" Plywood Top & Bottom (Wall): 1/2" A-Grade plywood with wood veneer Wall Cabinet Bottoms Yes Finished (Exterior): Bottom (Base): 1/2" A-Grade plywood with wood veneer CARB Compliant: Yes Back Panel: 1/2" Picture Frame recess style Hinged To The Right By Default. For Wall Cabinets Shelves: 3/4 " A-Grade plywood with wood veneer The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Door Hinges: Base Cabinet Shelf Depth: 1/2 Opposite Side To Re-Hinge, And Then Fill The Original Holes (Touch Up Kit Can Be Purchased For Solid Wood 3/5” sides, Drawer bottom 1/2” This) Drawer Box: plywood, Drawer length 21, Dovetail Toe Kicks Included w/Base construction, Natural finish. Yes Cabinets: Drawer Glides: Epoxy coated metal undermount Sides Panels Finished: Yes Base Corner Supports: Plastic corner brackets For this full overlay door style, if a cabinet side is being installed against a wall, a narrow clearance Overlay: Full with Butt doors Installation Note: may be necessary, depending on the decorative hardware that is being used, to make sure the Hinges: Concealed 6-way adjustable

cabinet door opens properly.

Page 29 of 46 Lexington Cinnamon Glaze

Shipping Time: Ships in 3-7 business days Hinges: Soft-close

Style: Raised Cabinet Interior: Clear coated natural maple interior

Face Frame: 3/4" x 1-1/2" Solid Wood Center Stile: None

Door Frame: Solid Maple Assembly Method: Nail/Screw/Glue

Door Center: Solid Maple Finish: Oil based finish

Sides: 1/2" Plywood Toe Kick: 1/2" thick, edge banded

Top & Bottom (Wall): 1/2" Plywood Installation Rail: 3/4" thick x 1-1/2" wide

Drawer Glides: Full extension, soft closing, undermount glides

Base Corner Supports: Metal bracket reinforced corners

Overlay: Full

Page 30 of 46 Cafe Mocha Glaze

Face Frame: 3/4" Solid Maple Assembly Method: Staple/Nail/Glue

Door Frame: 3/4" Solid Maple Finish: Hand Applied Stain and Glaze

Door Center: Solid Maple Toe Kick: 1/2" Solid Maple

Page 31 of 46 Phoenix Caramel Glaze

Shipping Time: Ships in 3-7 business days Hinges: Soft-close

Style: Raised Cabinet Interior: Clear coated natural maple interior

Face Frame: 3/4" x 1-1/2" Solid Wood Center Stile: None

Door Frame: Solid Maple Assembly Method: Nail/Screw/Glue

Door Center: Solid Maple Finish: Oil based finish

Sides: 1/2" Plywood Toe Kick: 1/2" thick, edge banded

Top & Bottom (Wall): 1/2" Plywood Installation Rail: 3/4" thick x 1-1/2" wide

Drawer Glides: Full extension, soft closing, undermount glides

Base Corner Supports: Metal bracket reinforced corners

Overlay: Full

Page 32 of 46 Nutmeg Twist

Shipping Time: This finish ships in 5-15 business days Cabinet Interior: Matches door finish Style: Raised Square Center Stile: No center stile on cabinetry 24"W to 36"W Face Frame: 3/4" Solid Birch Assembly Method: Steel Clip Door Frame: 3/4” Solid Birch Waterborne UV Finish from Sherwin Williams with Finish: Door Center: Solid Birch Glaze Toe Kick: 1/2" Plywood Sides: 1/2" A-Grade plywood with wood veneer Installation Rail: 1/2" Plywood Top & Bottom (Wall): 1/2" A-Grade plywood with wood veneer Wall Cabinet Bottoms Yes Bottom (Base): 3/8" A-Grade plywood with wood veneer Finished (Exterior):

Back Panel: 1/2" Picture Frame recess style CARB Compliant: Yes Hinged To The Right By Default. For Wall Cabinets Shelves: 3/4 " A-Grade plywood with wood veneer The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Base Cabinet Shelf Depth: 1/2 Door Hinges: Opposite Side To Re-Hinge, And Then Fill The Drawer Box: Solid Wood 17mm (close to 3/4") sides, Drawer Original Holes (Touch Up Kit Can Be Purchased For bottom 1/2" plywood, Drawer length 21". This) Toe Kicks Included w/Base Dovetail construction, Natural finish. Yes Drawer Glides: Undermount, full extension with soft closing Cabinets: feature Sides Panels Finished: Yes Base Corner Supports: Wood corner brackets with wood I-beam construction For this full overlay door style, if a cabinet side is Overlay: Full with Butt doors being installed against a wall, a narrow clearance Installation Note: may be necessary, depending on the decorative Hinges: Concealed 6-way adjustable with Soft Closing hardware that is being used, to make sure the cabinet door opens properly. Feature

Page 33 of 46 Newberry Merlot

Shipping Time: This finish ships in 5-15 business days Cabinet Interior: Matches door finish

Style: Raised Square Center Stile: No center stile on cabinetry 24"W to 36"W

Face Frame: 3/4" Solid Birch Assembly Method: Steel Clip Door Frame: 3/4” Solid Birch Waterborne UV Finish from Sherwin Williams with Finish: Glaze Door Center: Solid Birch Toe Kick: 1/2" Plywood Sides: 1/2" A-Grade plywood with wood veneer Installation Rail: 1/2" Plywood Top & Bottom (Wall): 1/2" A-Grade plywood with wood veneer Wall Cabinet Bottoms Yes Bottom (Base): 1/2" A-Grade plywood with wood veneer Finished (Exterior): CARB Compliant: Yes Back Panel: Full back on bases (3/4" plywood) Hinged To The Right By Default. For Wall Cabinets Shelves: 3/4 " A-Grade plywood with wood veneer The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Door Hinges: Base Cabinet Shelf Depth: 1/2 Opposite Side To Re-Hinge, And Then Fill The Solid Wood 17mm (close to 3/4") sides, Drawer Original Holes (Touch Up Kit Can Be Purchased For Drawer Box: bottom 1/2" plywood, Drawer length 21". This) Toe Kicks Included w/Base Dovetail construction, Natural finish. Yes Undermount, full extension with soft closing Cabinets: Drawer Glides: feature Sides Panels Finished: Yes Wood corner brackets with wood I-beam Base Corner Supports: construction For this full overlay door style, if a cabinet side is being installed against a wall, a narrow clearance Overlay: Full with butt doors Installation Note: may be necessary, depending on the decorative Concealed 6-way adjustable with Soft Closing hardware that is being used, to make sure the Hinges: cabinet door opens properly. Feature

Page 34 of 46 Cayenne Cognac

Face Frame: 3/4" Solid Maple Assembly Method: Staple/Nail/Glue

Door Frame: 3/4" Solid Maple Finish: Hand Applied Stain and Glaze

Door Center: Solid Maple Toe Kick: 1/2" Solid Maple

Page 35 of 46 Regency Pomegranate Glaze

Shipping Time: This finish ships in 5-15 business days Cabinet Interior: Matches door finish

Style: Raised Square (5pc recessed drawer header) Center Stile: No center stile on cabinetry 24"W to 36"W

cabinet door opens properly.

Page 36 of 46 Brantley Chocolate Glaze

6-way Adjustable, Concealed, European Soft Close Shipping Time: Ships in 3-5 business days Hinges: Hinges UV Coated Natural Interior (Prepped-for-glass Style: Recessed Panel Cabinet Interior: cabinets will be finished to match the cabinet fronts) Face Frame: 3/4" x 1-3/4" Birch Center Stile: None (unless listed in the cabinet description) Door Frame: 3/4" Solid Birch, Mitered Doors Metal Clip or Glue & Staple: Cabinets come with Veneered MDF (MDF is used to avoid Metal Clips (Cleats - not already installed on the Door Center: cracking/warping) Assembly Method: cabinets) that can be used to assemble or the cabinets can be Glued and Stapled. If Staple & Sides: 1/2" A-Grade Plywood Glued, clips will not be used 7 step, acid-catalyzed finish process with a UV Finish: Top & Bottom (Wall): 1/2" A-Grade Plywood coating and brushed glaze

Bottom (Base): 1/2" A-Grade Plywood Toe Kick: 1/2" Plywood

Back Panel: 1/2" Plywood Full Back Installation Rail: None Wall Cabinet Bottoms Yes Shelves: Adjustable 3/4" w/Front Edge Banding Finished (Exterior):

Overlay: Full

Page 37 of 46

Cambridge Saddle Glaze

6-way Adjustable, Concealed, European Soft Close Shipping Time: Ships in 3-5 business days Hinges: Hinges UV Coated Natural Interior (Prepped-for-glass Style: Raised Square Cabinet Interior: cabinets will be finished to match the cabinet fronts) Face Frame: 3/4" x 1-3/4" Birch Center Stile: None (unless listed in the cabinet description) Door Frame: 3/4" Solid Birch, Mitered Doors Metal Clip or Glue & Staple: Cabinets come with Metal Clips (Cleats - not already installed on the Door Center: Solid Birch Assembly Method: cabinets) that can be used to assemble or the cabinets can be Glued and Stapled. If Staple & Sides: 1/2" A-Grade Plywood Glued, clips will not be used 7 step, acid-catalyzed finish process with a UV Finish: Top & Bottom (Wall): 1/2" A-Grade Plywood coating and brushed glaze

Bottom (Base): 1/2" A-Grade Plywood Toe Kick: 1/2" Plywood

Back Panel: 1/2" A-Grade Plywood Full Back Installation Rail: None Wall Cabinet Bottoms Yes Shelves: Adjustable 3/4" w/Front Edge Banding Finished (Exterior):

Overlay: Full

Page 38 of 46

Signature Chocolate

Shipping Time: This finish ships in 5-15 business days Cabinet Interior: Matches door finish

Style: Raised Square Center Stile: No center stile on cabinetry 24"W to 36"W

Face Frame: 3/4" Solid Birch Assembly Method: Steel Clip Door Frame: 3/4” Solid Birch Waterborne UV Finish from Sherwin Williams with Finish: Glaze Door Center: Solid Birch Toe Kick: 1/2" Plywood Sides: 1/2" A-Grade plywood with wood veneer Installation Rail: 1/2" Plywood Top & Bottom (Wall): 1/2" A-Grade plywood with wood veneer Wall Cabinet Bottoms Yes Bottom (Base): 3/8" A-Grade plywood with wood veneer Finished (Exterior): CARB Compliant: Yes Back Panel: 1/2" Picture Frame recess style Hinged To The Right By Default. For Wall Cabinets Shelves: 3/4 " A-Grade plywood with wood veneer The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Door Hinges: Base Cabinet Shelf Depth: 1/2 Opposite Side To Re-Hinge, And Then Fill The Solid Wood 17mm (close to 3/4") sides, Drawer Original Holes (Touch Up Kit Can Be Purchased For Drawer Box: bottom 1/2" plywood, Drawer length 21". This) Toe Kicks Included w/Base Dovetail construction, Natural finish. Yes Undermount, full extension with soft closing Cabinets: Drawer Glides: feature Sides Panels Finished: Yes Wood corner brackets with wood I-beam Base Corner Supports: construction Page 39 of 46 For this full overlay door style, if a cabinet side is Overlay: Full with Butt doors being installed against a wall, a narrow clearance Concealed 6-way adjustable with Soft Closing Hinges: Installation Note: may be necessary, depending on the decorative Feature hardware that is being used, to make sure the cabinet door opens properly.

Regency Espresso

Shipping Time: This finish ships in 5-15 business days Cabinet Interior: Matches door finish

Style: Raised Square (5pc recessed drawer header) Center Stile: No center stile on cabinetry 24"W to 36"W

Face Frame: 3/4” Solid Birch Assembly Method: Steel Clip Door Frame: 3/4” Solid Birch Finish: Polyurethane Finish with Glaze (Except KT) MDF with Birch Veneer (MDF is used to avoid Door Center: cracking/warping) Toe Kick: 1/2" Plywood Sides: 1/2" A-Grade plywood with wood veneer Installation Rail: 1/2" Plywood Top & Bottom (Wall): 1/2" A-Grade plywood with wood veneer Wall Cabinet Bottoms Yes Finished (Exterior): Bottom (Base): 1/2" A-Grade plywood with wood veneer CARB Compliant: Yes Back Panel: 1/2" Picture Frame recess style Hinged To The Right By Default. For Wall Cabinets Shelves: 3/4 " A-Grade plywood with wood veneer The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Door Hinges: Base Cabinet Shelf Depth: 1/2 Opposite Side To Re-Hinge, And Then Fill The Original Holes (Touch Up Kit Can Be Purchased For Solid Wood 3/5” sides, Drawer bottom 1/2” This) Drawer Box: plywood, Drawer length 21, Dovetail construction, Natural finish. Page 40 of 46 Toe Kicks Included w/Base Drawer Glides: Epoxy coated metal undermount Yes Cabinets: Base Corner Supports: Plastic corner brackets Sides Panels Finished: Yes

Overlay: Full with Butt doors For this full overlay door style, if a cabinet side is being installed against a wall, a narrow clearance Hinges: Concealed 6-way adjustable Installation Note: may be necessary, depending on the decorative hardware that is being used, to make sure the cabinet door opens properly.

Coffee Shaker

6-way Adjustable, Concealed, European Soft Close Shipping Time: Ships in 3-5 business days Hinges: Hinges UV Coated Natural Interior (Prepped-for-glass Style: Shaker Cabinet Interior: cabinets will be finished to match the cabinet fronts) Face Frame: 3/4" x 1-3/4" Birch Center Stile: None (unless listed in the cabinet description) Door Frame: 3/4" Solid Birch Metal Clip or Glue & Staple: Cabinets come with Metal Clips (Cleats - not already installed on the Door Center: Solid Birch Assembly Method: cabinets) that can be used to assemble or the cabinets can be Glued and Stapled. If Staple & Sides: 1/2" A-Grade Plywood Glued, clips will not be used 7 step, acid-catalyzed finish process with a UV Finish: Top & Bottom (Wall): 1/2" A-Grade Plywood coating

Bottom (Base): 1/2" A-Grade Plywood Toe Kick: 1/2" Plywood

Back Panel: 1/2" A-Grade Plywood Full Back Installation Rail: None Wall Cabinet Bottoms Yes Shelves: Adjustable 3/4" w/Front Edge Banding Finished (Exterior):

Page 41 of 46 Base Cabinet Shelf Depth: 1/2 CARB Compliant: Yes 5/8" solid hardwood, dovetailed drawer box, Doors come pre-drilled for the hinges, the face Drawer Box: 5/16" Plywood Drawer Box Bottom, 5-Piece Door Hinges: frame has marks where to drill and the customer drawer front construction chooses Right or Left during assembly. Yes, but there will be a small gap when two cabinets Drawer Glides: Undermount, Full Extension, Soft Close Glides Toe Kicks Included w/Base are side by side, so the TKC (8' toe kick) is needed if Cabinets: cabinets are next to each other. Base Corner Supports: 3/4" Solid Wood Corner Blocks Sides Panels Finished: Yes Overlay: Full

Dark Chocolate Shaker

6-way Adjustable, Concealed, European Soft Close Shipping Time: Ships in 3-5 business days Hinges: Hinges UV Coated Natural Interior (Prepped-for-glass Style: Shaker Cabinet Interior: cabinets will be finished to match the cabinet fronts) Face Frame: 3/4" x 1-3/4" Birch Center Stile: None (unless listed in the cabinet description) Door Frame: 3/4" Solid Birch, Mortise & Tenon Doors Metal Clip or Glue & Staple: Cabinets come with Veneered MDF Center Panel (MDF is used to Metal Clips (Cleats - not already installed on the Door Center: avoid cracking/warping) Assembly Method: cabinets) that can be used to assemble or the cabinets can be Glued and Stapled. If Staple & Sides: 1/2" A-Grade Plywood Glued, clips will not be used 7 step, acid-catalyzed finish process with a UV Finish: Top & Bottom (Wall): 1/2" A-Grade Plywood coating and brushed glaze

Bottom (Base): 1/2" A-Grade Plywood Toe Kick: 1/2" Plywood

Back Panel: 1/2" A-Grade Plywood Full Back Installation Rail: None

Page 42 of 46 Wall Cabinet Bottoms Shelves: Adjustable 3/4" w/Front Edge Banding Yes Finished (Exterior): Base Cabinet Shelf Depth: 1/2 CARB Compliant: Yes 5/8" solid hardwood, dovetailed drawer box, Doors come pre-drilled for the hinges, the face Drawer Box: 5/16" Plywood Drawer Box Bottom, 5-Piece Door Hinges: frame has marks where to drill and the customer drawer front construction chooses Right or Left during assembly. Yes, but the SM-TKC (8' toe kick) is needed for all Drawer Glides: Undermount, Epoxy Drawer Glides Toe Kicks Included w/Base base cabinets to cover the unfinished sides since Cabinets: the included toe kick fits in between the plywood Base Corner Supports: 3/4" Solid Wood Corner Blocks side panels

Overlay: Full Sides Panels Finished: Yes

Brazilian Shaker

Shipping Time: This finish ships in 5-15 business days Cabinet Interior: Matches door finish

Style: Shaker Center Stile: No center stile on cabinetry 24"W to 36"W

Page 43 of 46 Hinged To The Right By Default. For Wall Cabinets Shelves: 3/4 " A-Grade plywood with wood veneer The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Base Cabinet Shelf Depth: 1/2 Door Hinges: Opposite Side To Re-Hinge, And Then Fill The Solid Wood 17mm (close to 3/4") sides, Drawer Original Holes (Touch Up Kit Can Be Purchased For Drawer Box: bottom 1/2" plywood, Drawer length 21". This) Dovetail construction, Natural finish. Toe Kicks Included w/Base Undermount, full extension with soft closing Yes Drawer Glides: Cabinets: feature Wood corner brackets with wood I-beam Sides Panels Finished: Yes Base Corner Supports: construction For this full overlay door style, if a cabinet side is Overlay: Full with butt doors being installed against a wall, a narrow clearance Installation Note: may be necessary, depending on the decorative Concealed 6-way adjustable with Soft Closing Hinges: hardware that is being used, to make sure the Feature cabinet door opens properly.

Southport Espresso Shaker

Shipping Time: Ships in 3-7 business days Hinges: Soft-close

Style: Shaker Cabinet Interior: Clear coated natural maple interior

Face Frame: 3/4" x 1-1/2" Solid Wood Center Stile: None

Door Frame: Solid Maple Assembly Method: Nail/Screw/Glue

Door Center: Solid Maple Finish: Oil based finish

Sides: 1/2" Plywood Toe Kick: 1/2" thick, edge banded

Page 44 of 46 Top & Bottom (Wall): 1/2" Plywood Installation Rail: 3/4" thick x 1-1/2" wide

Drawer Glides: Full extension, soft closing, undermount glides

Base Corner Supports: Metal bracket reinforced corners

Overlay: Full

Espresso Bean

Face Frame: 3/4" Solid Maple Assembly Method: Staple/Nail/Glue

Door Frame: 3/4" Solid Maple Finish: Hand Applied Stain and Glaze

Door Center: Solid Maple Toe Kick: 1/2" Solid Maple

Page 45 of 46 Sides: 1/2"Plywood Installation Rail: None Wall Cabinet Bottoms Top & Bottom (Wall): 1/2" Plywood No - Top And Bottom Are Unfinished Plywood Finished (Exterior): Bottom (Base): 1/2" Plywood CARB Compliant: Yes 1/2" Plywood (Sink Base/Vanity Cabinets - except Pre-Drilled To The Right - Wall Cabinets Can Be Back Panel: vanity drawer bases - do not have back panels Flipped, Base Cabinets Will Have To Have The but do have hanging rails) Door Hinges: Hinges Moved To The Opposite Side. Holes Can Be 5/8" Thick Plywood, Adjustable with Metal Shelf Shelves: Filled If Preferred, But They Will Only Be Visible Rests When The Door Is Open. Toe Kicks Included w/Base Base Cabinet Shelf Depth: 1/2 Yes Cabinets: Dovetail, 1/2" Thick Solid Wood Sides, 3/8" Drawer Box: Plywood Bottoms Sides Panels Finished: Yes Full Extension, Undermounted, Soft Close, Steel Drawer Glides: For this full overlay door style, if a cabinet is being Concealed Drawer Glides installed against a wall, a 1/2" clearance is Base Corner Supports: Metal Bracket Reinforcements for Base Cabinets recommended between the wall and side of the Installation Note: cabinet to allow the door to open properly. Scribe Overlay: Full molding can usually be used for very narrow spaces, however, only choose that option if the design Soft Close, 4-6 Way Adjustable European doesn't allow for a 1/2" clearance. Hinges: Concealed Metal Hinges

Page 46 of 46