Innovation in Materials Science and Engineering Jayeeta Chattopadhyay • Rahul Singh Om Prakash Editors

Innovation in Materials Science and Engineering Proceedings of ICEMIT 2017, Volume 2

123 Editors Jayeeta Chattopadhyay Om Prakash Department of Chemistry Department of Mechanical Engineering Amity University National Institute of Technology, Patna Ranchi, , Patna, Bihar, India

Rahul Singh Department of Mechanical Engineering Amity University Ranchi, Jharkhand, India

ISBN 978-981-13-2943-2 ISBN 978-981-13-2944-9 (eBook) https://doi.org/10.1007/978-981-13-2944-9

Library of Congress Control Number: 2018960726

© Springer Nature Singapore Pte Ltd. 2019 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

This Springer imprint is published by the registered company Springer Nature Singapore Pte Ltd. The registered company address is: 152 Beach Road, #21-01/04 Gateway East, Singapore 189721, Singapore Preface

The book entitled “Innovation in Materials Science and Engineering” will aim at all the scientists, academicians, research scholars, and students, who are interested to understand the current research persuading in the field of materials science. This book will assemble the scientific work on materials science going to be presented in International Conference on Energy, Materials and Information Technology, 2017, at Amity University Jharkhand, India. The materials science domain is immense and diverse by itself. This extravagance is both a product of advances in materials and a challenge in its future growth. This book emphasizes in all aspects of materials, from synthesis to its extraordinary and effective applications, from its physical characterizations to its cost-effectiveness. At one point, it provides an intrinsic knowledge on the nano-structured materials with their challenging and innovative applications; at some other point, it will be a source of knowledge towards the biotechnologists and pharmacologists for the recent knowledge of biomaterials research. It has also covered the essential and state-of-the-art research work of various engineering materials with important physical characteristics of materials which can be used to protect civilization from landslide hazards. Overall, a multidisciplinary scientific education on materials science and technology can be spread to the top quality experts who have a generic background in the different subdisciplines such as electronics, physics, chemistry, material science, and biotechnology.

Ranchi, India Jayeeta Chattopadhyay Rahul Singh

v Acknowledgement

It is our pleasure to present this volume consisting of selected papers based on the oral presentation in International Conference on Energy, Materials and Information Technology at Amity University Jharkhand, Ranchi, India, on 23–24 December 2017. We would like to take this opportunity to thank all of the participants in the conference—invited speakers, presenters, and audience alike. Our special thanks go to all the keynote speakers present in the conference. We would like to thank SERB-DST for financial sponsorship for this conference. We express our heartfelt thanks to our Founder President, Dr. Ashok K Chauhan, and Chancellor, Dr. Atul Chauhan, for showing us the right path. We would like to thank Prof. (Dr.) R.K. Jha, Vice Chancellor, Amity University Jharkhand, for his enormous support. We thank Prof. (Dr.) Ajit Kr. Pandey, Director, Amity University Jharkhand, for his valuable guidance. Here, we would like to give special thanks to Dr. Nitya Garg and Mr. Pravin Singh, without whom this proceedings would not have taken proper shape. We would like to thank all the faculty, staff, and students of Amity University Jharkhand for their continuous support for making this conference successful.

vii Contents

Effect of Polymer Modification on Structural and Mechanical Properties of Concrete Using Epoxy Emulsion as the Modifier ...... 1 Shilpa Pal, Sachin Tiwari, Khushboo Katyal and Aditi Singh Moisture Absorption Behavior and Mechanical Properties of Banana Fiber-Reinforced Fly Ash/Epoxy Composites ...... 11 Badremanir Kauser, Vikas Upadhyay, Vineet Chak and Faisal Hasan Effect of Chemical Modification on Physical Properties of Natural Fiber-Reinforced Hybrid Polymer Composites ...... 17 Debasmita Pani and Punyapriya Mishra Future Research Potentials of Hot Rolling Process: A Review ...... 27 F. B. Kumar, A. Sharma and M. Oraon Analysis of Wire-EDM Input Parameters on Kerf Width and Surface Integrity for Al 6061 Alloy ...... 35 K. Mandal, S. Sarkar, S. Mitra and D. Bose A Brief Study on Characteristics, Properties, and Applications of CdSe ...... 43 Nitya Garg Investigation of Mechanical Properties and Microstructure of Pure Al-SiC-Nanocomposite Casted by Stir-Squeeze Casting Process ...... 61 Pooja Verma, Prabha Kumari, Joyjeet Ghose and Vijay Pandey Study of the Oxidation of Sulphanilic Acid by Cr(VI)-Based Oxidants ...... 71 A. Prameela

Oxidation of Phthalic Acid by CrO3 (VI) ...... 79 A. Prameela

ix x Contents

Experimental Investigation and Optimization of Welding Parameters on TIG Welding of Stainless Steel AISI 304 Plates ...... 91 Sanjay Kumar, Pravin K. Singh, D. Patel and S. B. Prasad Microbiological and Physiochemical Characteristics of Some Common Fungal Flora Isolated from Various Petroleum-Contaminated Pump Stations of Hazaribag District, Jharkhand, India ...... 103 Kumar Anand, Priti Kumari, Nikita Kumari and Pritam Bala Sinha Isolation, Identification and Characterization of Fungi from Vinoba Bhave University Campus, Hazaribag District ...... 115 Kumar Anand, Thirupathi Karuppanapandian and Pritam Bala Sinha Prediction of Controllable Process Variables for Various Workpiece Materials in CNC-WEDM ...... 131 Sabindra Kachhap and Abhishek Singh Synthesis of Graphene by Reduction of Graphene Oxide Using Non-Toxic Chemical Reductant ...... 143 S. Kumari, A. Panigrahi, S. K. Singh and S. K. Pradhan Modeling and Optimization of Surface Roughness in Hard Turning of AISI 4340 Steel with Coated Ceramic Tool ...... 151 J. Jena, A. Panda, A. K. Behera, P. C. Jena, Sudhansu Ranjan Das and D. Dhupal Local Strain Analysis in a Uni-Directional Fiber-Reinforced Composite: DIC Versus FEA ...... 161 A. Sharma and S. Daggumati Atomic Force Microscopic Characterization of Wire Electrical Discharge Machined Samples ...... 171 Hulas Raj Tonday, Pravin Kumar Singh and Anand Mukut Tigga Friction Stir Welding of Steels—A Localized Thermo-mechanical Processing Technique for Producing Ultrafine-Grained Structures .... 179 Md Anwar Ali Anshari and Murshid Imam A Review on Flexibility and Reconfigurability in Manufacturing System ...... 187 Durga Prasad and S. C. Jayswal Effect of Mg Concentration on the Structural, Morphological and Optical Properties of Ternary ZnMgO Nanocrystalline Thin Films ...... 201 Shashikant Rajpal and S. R. Kumar Study and Optimization of Erosive Behavior of Carbon Black–Epoxy Polymer Composites Using Taguchi Method ...... 209 Narasingh Deep and Punyapriya Mishra Contents xi

Al MMC Reinforced with Al2O3 and CU Prepared by Stir-Casting Method ...... 219 Rajeev Ranjan and Abhay Ranjan Kumar Singh Author Index...... 225 About the Editors

Jayeeta Chattopadhyay received her Bachelor of Science with Honours in Chemistry from Bethune College, Calcutta University. She got her Master of Science in Chemistry from Devi Ahilya Vishwavidyalaya, Indore (2003), and Master of Technology in Fuels and Combustion from Birla Institute of Technology, Mesra, Ranchi (2005). She obtained her Ph.D. in New Energy Engineering with best doctoral thesis award from Seoul National University of Science and Technology, S. Korea (2010). She has obtained the prestigious Fast Track Young Scientist Award (2010) and early Career Research Award (2017) from Department of Science and Technology, Govt. of India. She has published more than 20 research and review articles in high-impact peer-reviewed international journals, and she is owner of one international patent. She is the reviewer of more than ten high-impact international journals and has been included in editorial board of two international journals. Her research interest includes nano-structured materials for energy applications and thero-degradation of solid waste materials. She also works on oscillatory chemical reactions and pattern formation in reaction diffusion system. Earlier she was working as Research Scientist in Birla Institute of Technology, Mesra, Deoghar Off-campus, Jharkhand. She is presently working as Senior Assistant Professor, Amity University, Jharkhand, Ranchi, India.

xiii xiv About the Editors

Mr. Rahul Singh graduated in Mechanical engineering in 2009 form BIT, post graduated in Machine Design with distinction from BIT MESRA, Ranchi in2014, and pursuing Ph.D. from National Institute of Technology, Patna since 2014. He is now an assistant professor in the department of mechanical and automation engineer- ing at AMITY University Jharkhand, Ranchi. He had served in various organization like SSIPMT , Jain University Belgaum, and Sikkim Manipal University Gangtok. His specialized field of research are: Design of machine components, Heat and mass transfer analysis, Renewable energy, assessment of wind power and Micro wind turbine. He has done more than 10 publications in journal of national and international repute alongside conference proceedings. He had attended and organized seminar, workshop, and conference of national and international repute. Apart from research publication, he published four books on titles like fluid mechanics, fluid machinery and dynamics of machines. His subject of interest is: Fluid mechanics, Heat and Mass transfer, Strength of materials, Kinematics of machines and machine design.

Prof. (Dr.) Om Prakash: Om Prakash, graduated in Mechanical engineering in 1994, post graduated in Design and Production of Thermal Power Equipment from NIT Tiruchirappalli in 1997, and Ph.D. from Indian Institute of Technology in 2005. He is now a professor in the department of mechanical engineering and dean of faculty welfare at National institute of technology, Patna. He had served in various organization like Indian Airforce, Directorate of Training and Technical Education, Delhi college of Engineering, and Rajaram Sinde College of Engineering. His specialized field of research are: Heat and mass transfer analysis, Energy audit and energy efficiency, biogas fueled diesel engine, and Micro wind turbine. He has done more than 30 publications in journal of national and international repute. Apart from publication, he guided more than 15 students for M.Tech and 10 students (completed and ongoing) for Ph.D. He had attended and organized seminar, workshop, and conference of national and About the Editors xv

international repute. He is the life member of profes- sional bodies like SAEINDIA, Indian Society of Heating, Refrigerating and Air Conditioning Engineers (ISHRAE), Indian Society for Technical Education (ISTE), the Institution of Engineers (India), and Society of Energy Engineers and Managers (SEEM).