e_kb581_cover_6mm.fm Page 1 Thursday, December 8, 2016 9:51 AM
RICOH IMAGING COMPANY, LTD. 1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN (http://www.ricoh-imaging.co.jp) Introduction 1 RICOH IMAGING EUROPE Parc Tertiaire SILIC 7-9, avenue Robert Schuman - B.P. 70102, S.A.S. 94513 Rungis Cedex, FRANCE Getting Started 2 (http://www.ricoh-imaging.eu) SLR Digital Camera RICOH IMAGING AMERICAS 5 Dedrick Place, West Caldwell, New Jersey 07006, U.S.A. CORPORATION (http://www.us.ricoh-imaging.com) Shooting 3 RICOH IMAGING CANADA 5520 Explorer Drive Suite 300, Mississauga, Ontario, L4W 5L1, CANADA INC. (http://www.ricoh-imaging.ca) Playback 4 Operating Manual RICOH IMAGING CHINA CO., 23D, Jun Yao International Plaza, 789 Zhaojiabang Road, Xu Hui District, LTD. Shanghai, 200032, CHINA Sharing 5 (http://www.ricoh-imaging.com.cn) Settings 6 http://www.ricoh-imaging.co.jp/english Appendix 7 This contact information may change without notice. Please check the latest information on our websites.
• Specifications and external dimensions are subject to change without notice. To ensure the best performance from your
54314 Copyright © RICOH IMAGING COMPANY, LTD. 2016 camera, please read the Operating Manual R01DTL16 Printed in Philippines before using the camera. e_kb581_cover_6mm.fm Page 2 Thursday, December 8, 2016 9:51 AM
Memo For Using Your Camera Safely About the Battery Charger and AC Adapter
We have paid close attention to the safety of this camera. When using this Warning camera, we request your special attention regarding items marked with the • Always use the battery charger and AC adapter exclusively developed following symbols. for this camera, with the specified power and voltage. Using a battery charger or AC adapter not exclusive to this camera, or using the Warning This symbol indicates that ignoring this item exclusive battery charger or AC adapter with an unspecified power or could cause serious personal injuries. voltage can cause a fire, electric shock, or camera breakdown. The specified voltage is 100 - 240V AC. Caution This symbol indicates that ignoring this item • Do not disassemble or modify the product. This can cause a fire or could cause minor or medium personal injuries, electric shock. or loss of property. • If the generation of smoke or strange odor from the product or other abnormality occurs, immediately discontinue using and consult your nearest service center. Continued use can cause a fire or electric shock. About the Camera • If water should happen to get inside the product, consult your nearest service center. Continued use can cause a fire or electric shock. • If you see a lightning flash or hear thunder during use of the battery Warning charger or AC adapter, unplug the power plug and discontinue using. Continued use can cause damage to the product, fire or electric shock. • Do not disassemble or modify the camera. High voltage areas are • Wipe off the power plug if it should become covered with dust. present inside the camera, with the risk of electric shock. Accumulated dust may cause a fire. • If the camera interior is exposed due to dropping or otherwise damaging • To reduce the risk of hazards, use only CSA/UL certified power supply the camera, never touch the exposed portion. There is a risk of electric cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, shock. one end with a molded-on male attachment plug cap (with a specified • Do not aim the camera at the sun or other strong light sources when NEMA configuration), and the other is provided with a molded-on female taking pictures or leave the camera sitting in direct sunlight with a lens connector body (with a specified IEC nonindustrial type configuration) or cap off. Doing so may cause the camera to malfunction or cause a fire. the equivalent. • Do not look at the sun or other strong light sources through a lens. Doing so may lead to a loss of eyesight or cause vision to be impaired. • If any irregularities occur during use, such as smoke and a strange odor, Caution stop using the camera immediately, remove the battery or the AC • Do not place or drop heavy objects on or forcefully bend the AC plug adapter, and contact your nearest service center. Continued use can cord. Doing so may damage the cord. Should the AC plug cord be cause a fire or electric shock. damaged, consult your nearest service center. • Do not touch or short-circuit the terminal area of the AC plug cord while Caution the cord is plugged in. • Do not handle the power plug with wet hands. This can cause an electric • Do not place your finger over the flash when discharging the flash. You shock. may burn yourself. • Do not drop the product, or subject it to violent impact. This can cause • Do not cover the flash with clothing when discharging the flash. the product to breakdown. Discoloration may occur. • Do not use the battery charger D-BC109 to charge batteries other than • Some portions of the camera heat up during use. There is a risk of low the rechargeable lithium-ion battery D-LI109. Attempting to charge other temperature burns when holding such portions for long periods. types of batteries may cause an explosion or heating, or may damage • Should the monitor be damaged, be careful of glass fragments. Also, be the battery charger. careful not to allow the liquid crystal to get on your skin or in your eyes or mouth. • Depending on your individual factors or physical condition, the use of the camera may cause itching, rashes or blisters. In case of any abnormality, stop using the camera and get medical attention immediately. About the Rechargeable Lithium-ion Battery
Warning • If any leakage from the battery should come in contact with your eyes, do not rub them. Flush your eyes with clean water and get medical attention immediately.
Caution • Only use the specified battery with this camera. Use of other batteries may cause an explosion or fire. • Do not disassemble the battery. Disassembling the battery may cause an explosion or leakage. • Remove the battery from the camera immediately if it becomes hot or begins to smoke. Be careful not to burn yourself during removal. • Keep wires, hairpins, and other metal objects away from the + and - contacts of the battery. • Do not short the battery or dispose of the battery in fire. This can cause an explosion or fire. • If any leakage from the battery should come in contact with skin or clothing, it may cause irritation to the skin. Wash the affected areas thoroughly with water. • Precautions for D-LI109 Battery Usage: - USE SPECIFIED CHARGER ONLY. - DO NOT INCINERATE. - DO NOT DISASSEMBLE. - DO NOT SHORT CIRCUIT. - DO NOT EXPOSE TO HIGH TEMP. (140°F / 60°C)
Keep the Camera and its Accessories out of the Reach of Small Children
Warning • Do not place the camera and its accessories within the reach of small children. 1. If the product falls or is operated accidentally, it may cause serious personal injuries. 2. Wrapping the strap around a neck may cause suffocation. 3. To avoid the risk of a small accessory such as the battery or memory cards from being swallowed by mistake, keep them out of the reach of small children. Seek medical attention immediately if an accessory is accidentally swallowed.
1 Memo
2 Introducing the KP 1 Getting Started 2 Taking Pictures 3 Playback Functions 4 Sharing Images 5 Changing the Settings 6 Appendix 7
3 ...... p.48 Configuring the Capture Settings Settings ...... p.48 Capture the Configuring Pictures Still Taking ...... p.48 Movies Recording ...... p.52 the Exposure Setting ...... p.54 Flash Built-in the Using ...... p.57 Settingthe Focus Method ...... p.59 Mode the Drive Setting ...... p.64 Settingthe White Balance ...... p.72 Tone Finishing Image the ...... p.74 Controlling Images Correcting ...... p.76 Onceyou’ve cameraconfirmed the that works properly, try out the camera and take lots of pictures! Taking Pictures Taking 3 ...... p.9 ...... p.36 How Manual This to Use Attaching the Strap Strap the Attaching ...... p.36 Lens a Attaching ...... p.37 Charger and Battery the Using ...... p.38 Card Memory a Inserting ...... p.40 Adjusting theAngle ofthe Monitor ...... p.41 Settings ...... p.42 Initial Operation Shooting Basic ...... p.44 Images Reviewing ...... p.47 Checking the Contents of the PackageCheckingof Contents the the .....p.9 Working the of Functions and Names ...... p.10 Parts Indicators Display ...... p.13 Howto Change FunctionSettings ...... p.20 ...... p.24 List Menu Gives you an overview ofthe KP. Read this and getto know your KP! Explains how to getfor as readyto your KP shooting Explains how well as basic operations. Getting Started Getting Introducing the KP the Introducing 2 1
How to Use This Manual 4 How to Use This Manual 5 ...... p.141 ...... p.115 ...... p.116 ...... p.120 Restrictions CombinationsSpecial the on of ...... p.115 Functions Functions with Various Lenses Available Functions when Using an External Flash Flash External an Using when Functions Using the GPS Unit Unit GPS the Using ...... p.121 ...... p.123 Troubleshooting Specifications ...... p.126 Main ...... p.133 Index Care to be Taken During Handling ...... p.137 WARRANTY POLICY ...... Providesresources otheryourget most to from the KP. Appendix 7 There is a possibility that the illustrations and the display screen of the monitor in this manual are different from the actual ones. ...... p.102 ...... p.81 ...... p.92 Camera Settings Settings Camera ...... p.102 Settings Management File ...... p.110 Using the Camera with a Computer ...... p.92 Communication a with Camera the Using ...... p.93 Device Playback Mode Palette Items ...... p.81 ChangingPlayback the Method ...... p.82 Editing and Processing Images ...... p.86 Explains various operations for playing backExplainsplaying operations various and for editing images. Explains how to connect your KP to a computerKPconnectyour or to to Explains how communicationand cameraoperate the device to camera. the imagesuse in Changing the the Changing Settings Sharing Images Playback Functions Explains how to change settings.to other Explains how 6 5 4 Contents
How to Use This Manual ...... 4 Setting the Date and Time ...... 43
Contents Setting the LCD Display ...... 43 Introducing the KP ...... 9 Formatting a Memory Card ...... 44 Basic Shooting Operation ...... 44 Checking the Contents of the Package ...... 9 Shooting with the Viewfinder ...... 44 Names and Functions of the Working Parts ....10 Shooting while Viewing the Live View Image ...... 46 Operating Controls ...... 11 Reviewing Images ...... 47 Display Indicators ...... 13 Monitor ...... 13 Taking Pictures ...... 48 Viewfinder ...... 19 Configuring the Capture Settings ...... 48 Electronic Level ...... 20 Image Capture Settings ...... 48 How to Change Function Settings ...... 20 Movie Capture Settings ...... 48 Using the Direct Keys ...... 20 Taking Still Pictures ...... 48 Using the Smart Function ...... 21 Shooting in Exposure Modes ...... 49 Using the Control Panel ...... 21 Using the Electronic Shutter ...... 52 Using the Menus ...... 23 Recording Movies ...... 52 Menu List ...... 24 Playing Back Movies ...... 54 Rec. Mode Menus ...... 24 Setting the Exposure ...... 54 Movie Menus ...... 29 Sensitivity ...... 54 Playback Menu ...... 31 EV Compensation ...... 56 Set-up Menus ...... 32 AE Metering ...... 57 Custom Setting Menus ...... 34 Using the Built-in Flash ...... 57 Getting Started ...... 36 Setting the Focus Method ...... 59 Setting the Autofocus when Shooting with the Attaching the Strap ...... 36 Viewfinder ...... 59 Attaching a Lens ...... 37 Setting the Autofocus when Shooting with Live Using the Battery and Charger ...... 38 View ...... 61 Charging the Battery ...... 38 AF Fine Adjustment ...... 63 Inserting/Removing the Battery ...... 39 Setting the Drive Mode ...... 64 Using the AC Adapter ...... 40 Continuous Shooting ...... 65 Inserting a Memory Card ...... 40 Self-timer ...... 65 Adjusting the Angle of the Monitor ...... 41 Bracketing ...... 66 Initial Settings ...... 42 Depth of Field Bracketing ...... 67 Turning the Camera On ...... 42 Motion Bracketing ...... 68 Mirror Lock-up Shooting ...... 69 6 Setting the Display Language ...... 42 Contents 7 Various Lenses Lenses Various ...... 116 Shooting Celestial Bodies ...... 121 Sensor Cleaning ...... 124 Error Messages ...... 125 Operating Environment for USB Connection and Provided Software ...... 132 Customizing the Button/E-dial Functions ...... 102 Setting the Monitor and Indicator Lamps ...... 107 Saving Frequently Used Settings ...... 108 Selecting Settings to Save in the Camera ...... 110 Protecting Images from Deletion ...... 110 Specifying the Folder/File Settings ...... 111 Setting the Copyright Information ...... 113 Displaying the Local Date and Time of the Specified City ...... 114 Using the Aperture Ring ...... 118 Performing Catch-in Focus Shooting ...... 119 Setting the Focal Length ...... 119 Operating theCamera with a Communication Device ...... 94 Index ...... 133 Index Handling ...... 137 During be Care to Taken WARRANTY POLICY ...... 141 RestrictionsCombinations the on of Special ...... 115 Functions with Available Functions Flash External an Using when Functions ...... 120 Unit ...... 121 GPS the Using ...... 123 Troubleshooting Specifications Main ...... 126 Camera Settings Settings Camera ...... 102 Settings Management File ...... 110 Appendix...... 115 Changing theChanging Settings ...... 102
Enabling the Wi-Fi™ Function ...... 93 Setting the Connection Mode ...... 92 Copying an Image on the Memory Card ...... 92 Operating the Camera with a Computer ...... 93 Changing the Image Size ...... 86 Correcting Color Moiré ...... 87 Processing Images with Digital Filters ...... 87 Editing Movies ...... 89 Developing RAW Images ...... 90 Displaying Multiple Images ...... 82 Displaying Images by Folder ...... 83 Displaying Images by Shooting Date ...... 83 Playing Back Images Continuously ...... 84 Displaying Rotated Images ...... 84 Connecting the Camera to an AV Device ...... 85 Brightness Adjustment ...... 76 Lens Correction ...... 77 Quality Level and Texture Adjustment ...... 78 Composition Adjustment ...... 80 Custom Image ...... 74 Digital Filter ...... 75 Adjusting the White Balance Manually ...... 73 Adjusting the White Balance with Color Temperature ...... 73 Multi-exposure ...... 69 Interval Shooting ...... 70 Usinga Communicationthe Camera with ...... 93 Device Using the Camera with a Computer Computer a with ...... 92 Camera the Using Editing Processing and Images ...... 86 Playback Mode Palette Items ...... 81 Method the Playback Changing ...... 82 Controlling the Image Finishing Tone Tone Finishing Image the ...... 74 Controlling Images Correcting ...... 76 Setting the White Balance Balance White the Setting ...... 72
Sharing Images ...... 92 Playback Functions ...... 81 PC or a Macintosh. ® http://www.ricoh-imaging.com/registration/ batteries used for this camera and its accessories. that generates strong electromagnetic radiation or magnetic fields. Strong static charges or the magnetic transmitters radio as such equipment by produced fields could interfere with the monitor, damage the stored data, or affect the camera’s internal circuitry and cause camera misoperation. manufactured using extremely highprecision technology. Although the level of functioning pixels is 99.99% or better, may pixels the of fewer or 0.01% that aware be should you not light up or may light up when they should not. However, this has no effect on the recorded image. usesthe PENTAXoriginal technologymoves and the image sensor to an appropriate position at high speed with a magnetic force, which reduces image blurring caused by camera motion. rattling A sound is made whencamera the this but orientation, its changing by example, for shaken, is is not malfunction.a either a Windows • In this manual, the term “battery(ies)” refers to any type of Regarding User Registration In order to better serve you, we request that you complete the user registration, which can be found on the CD-ROM supplied with the camera on ouror website. Thank you for your cooperation. To users of this camera • Donotor use store this camera in the vicinityof equipment • The liquid crystal panel used for the monitor is • The Shake Reduction (SR) mechanism of this camera • In this manual, the generic term “computer(s)” refers to Regarding copyrights Images taken with this camera that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act. Please take care, as there are cases where limitations are placed on taking pictures even for personal enjoyment display. on items of or performances demonstrations, during Images taken with the purpose of obtaining copyrights the of use of scope the outside used be also cannot copyrightas laid out inthe CopyrightAct, and care shouldbe taken here also.
Contents 8 Checking the Contents of the Package 1 Introduction
Hot shoe cover FK Eyecup FR Body mount cap K II Triangular ring and protective (Installed on camera) (Installed on camera) (Installed on camera) cover (Installed on camera)
Battery grip terminal cover Grip S O-GP167 Rechargeable lithium-ion Battery charger (Installed on camera) (Installed on camera) battery D-LI109 D-BC109
AC plug cord Strap Software (CD-ROM) Operating Manual (this manual) O-ST162 S-SW167
Lenses you can use Lenses that can be used with this camera are DA, DA L, D FA, FA J, and FA lenses and lenses that have an 9 (Auto) position on the aperture ring. To use any other lens or accessory, see p.116. 9 Names and Functions of the Working Parts
1 Microphones AF assist light/ Introduction Self-timer lamp
Strap lug
Grip mounting screw Microphone/cable release terminal DC input terminal Lens mount index Mirror
Lens unlock button
Hot shoe Lens information contacts Image plane indicator
AF coupler Built-in flash Speaker
Diopter adjustment lever Strap lug Viewfinder
Tiltable monitor USB/video output terminal
Card slot for SD Memory Card
Card access lamp
Battery cover unlock lever
Battery cover
Battery grip terminal
Tripod socket 10 1 Function dial Operating Controls Selects the function to change its settings with the setting dial. (Smart Function, p.21) 1 You can assign functions to C1, C2, and C3. (p.105) 1 2 2 Setting dial 7 Introduction 3 Changes the settings for the function selected with the function dial. (p.21) 4 8 J Z 5 3 EV Compensation/Fx3 button ( / ) 9 Press to change the exposure compensation value. (p.56) 6 You can assign a function to this button. (p.102) 0 In playback mode, press to save the last captured JPEG image also in RAW format. (p.47) a 4 Shutter release button (0) Press to capture images. (p.45) b In playback mode, press halfway to switch to capture mode. 5 Main switch Turns the power on or off. (p.42) 6 Front e-dial (Q) Changes the values for camera settings such as exposure. (p.49) e You can change the menu category when a menu screen is displayed. (p.23) f In playback mode, use this to select a different image. c g 7 Mode dial lock button Press to allow the mode dial to be turned. (p.45) h 8 Mode dial Changes the capture mode. (p.45, p.48) d i 9 Flash pop-up button (1) Press to pop up the built-in flash. (p.58) j 0 RAW/Fx1 button (X) k Press to temporarily change the file format. (p.103) You can assign a function to this button. (p.102) l a AF Mode button (b) Press to change the AF mode or AF area. (p.60, p.62) b Focus mode switch (v/w switch) Changes the focus method. (p.59) 11 c Electronic Level/Delete/Fx2 button (h/L/Y) j OK button (E) Turns the Electronic Level display for the viewfinder and When a menu or the control panel is displayed, press this Live View on or off. (p.20) button to confirm the selected item. In playback mode, press to delete images. (p.47) Press and hold this button when [AF Active Area] is set to 1 You can assign a function to this button. (p.102) [Select], [Expanded Area AF], or [Multiple AF Points] to
Introduction d Rear e-dial (R) switch the function of the arrow keys to AF area change Changes the values for camera settings such as exposure. mode or direct key operation mode. (p.60, p.62) (p.49) k INFO button (G) You can change the menu tabs when a menu screen is Changes the style of the display on the monitor. (p.13, p.17) displayed. (p.23) l MENU button (F) You can change camera settings when the control panel is Displays a menu. Press this button while the menu is displayed. (p.21) displayed to return to the previous screen. (p.23) In playback mode, use this to magnify the image or display multiple images at the same time. (p.47, p.82) About the Four-way Controller e Capture mode selector switch (A/K/C switch) In this manual, each button of the four- Switches between A (still picture: shooting with the way controller is indicated as shown in viewfinder) mode, K (still picture: shooting with Live View) the illustration on the right. mode, and C (movie) mode. (p.44, p.52) f AF/AE Lock button (f) Available for adjusting focus, instead of pressing 0 halfway, and for locking the exposure value before shooting. (p.51, p.59) g Green button (M) Resets the value being adjusted. h Playback button (3) Switches to playback mode. (p.47) Press the button again to switch to capture mode. i Four-way controller (ABCD) Displays the Sensitivity, White Balance, Flash Mode, or Drive Mode setup menu. (p.20) When a menu or the control panel is displayed, use this to move the cursor or change the item to set. Press B in single image display of the playback mode to display the playback mode palette. (p.81)
12 t Memo Display Indicators • You can set the display color of the status screen, control panel, and menu cursor in “Initial Settings” (p.42). 1
Monitor Introduction
Capture Mode
With this camera, you can take pictures while looking through the viewfinder or while viewing the image on the monitor. When using the viewfinder, you can take pictures while checking the status screen displayed on the monitor and looking through the viewfinder. (p.44) When not using the viewfinder, you can take pictures while viewing the Live View image displayed on the monitor. (p.46) The camera is in “standby mode” when it is ready to shoot, such as when the status screen or Live View image is displayed. Press G in standby mode to display the “control panel” and change settings. (p.21) You can change the type of information displayed in standby mode by pressing G while the control panel is displayed. (p.16)
CustomCustom ImageImage 9999999999 G BrightBright
9999999999 002/02/20172/02/2017 110:230:23 Standby mode Control panel (Status screen) G
StatusStatus SScreencreen
9999999999 Shooting Info Display selection screen 13 20 Flash Mode (p.57)/ 28 File Format (p.48) Standby Mode Wireless mode channel 29 Memory card The settings for shooting are displayed. (p.120) 30 Number of recordable 21 Focusing area (AF point) still pictures/Movie 1 Status Screen (p.60) recordable time
Introduction 1 234 5678 9 10 11 22 Drive Mode (p.64)/ 31 Operation guide 11// 225050 F 55.6.6 1213 12 14 Number of shots during 32 Temperature warning 110240002400 12 15 15 Multi-exposure or 33 Histogram 1216 17 20 21 22 Interval Shooting 34 Electronic Level 18 19 23 23 White Balance (p.72) (horizontal tilt) (p.20) ++1.01.0 GG1A11A1 24 25 26 27 9999999999 28 29 30 31 24 Flash Exposure 35 Electronic Level (vertical Compensation (p.57) tilt) (p.20) Live View 25 White Balance fine- 36 Face detection frame 12022233 46 7 8 910 11 tuning (p.72) (when [AF Active Area] is 26 Operation Control Lock set to [Face Detection]) 34 27 (p.51) (p.62) 26 35 27 External Input Devices 37 Grid Display (p.26, p.29) 32 (p.53) 16 33 ++1.71.7EEVV 17 t Memo 18 ±0EV±0EV 31 11//22000000 FF2.82.8 110240002400 99999999 11//118080 FF2.82.8 11600600 99999999 • In [Live View] of the A5 and C2 menus, you can change the 2 13 14 15 28 29 30 36 37 display settings of Live View. (p.26, p.29)
1 Capture mode (p.48) 10 Shake Reduction/ 2 AE Lock (p.51) Horizon Correction/ 3 Custom Image (p.74) Movie SR/Composition 4 Clarity (p.78)/Skin Tone Adjustment (p.80) (p.78)/Digital Filter 11 Battery level (p.75)/HDR Capture 12 E-dial guide (p.77)/Pixel Shift 13 Shutter speed Resolution (p.78) 14 Aperture value 5 AA Filter Simulator (p.79) 15 Sensitivity (p.54) 6 Electronic Shutter (p.52) 16 EV Compensation 7 GPS positioning status (p.56)/Bracketing (p.66) (p.121) 17 EV bar scale 8 Wi-Fi™ connection 18 Operation guide for status (p.93) Smart Function (p.21) 9 AE Metering (p.57) 19 Focus Method (p.59)
14 28 Framerate (p.48) 32 AF Assist Light (p.24) Control Panel 29 Recording Sound Level 33 Current date and time The following functions are displayed with the default setting. (p.53) 34 Destination (p.114) 30 External Input Devices 35 Operation guide for the A mode (p.53) control panel 1
CustomCustom ImageImage 9999999999 1 34 31 Grid Display (p.29) customization (p.22) Introduction BBrightright 2 5 6 7 8 9 t Memo 10 11 12 13 14 • Refer to “Using the Control Panel” (p.21) for how to use the 15 16 17 18 19 control panel. 20 21 22 23 24 • The functions displayed on the control panel can be 3334 35 002/02/20172/02/2017 110:230:23 customized. (p.22) C mode
HighlightHighlight CCorrectionorrection 99:59’59”:59’59” 1 34 AutoAuto 2 5 6 7 12 19 25 26 27 23 28 29 30 31 24 32
002/02/20172/02/2017 110:230:23 33 34 35
1 Function name 15 Distortion Correction 2 Setting (p.77) 3 Memory card 16 Peripheral Illumination 4 Number of recordable Correction (p.77) still pictures/Movie 17 Horizon Correction recordable time 18 AA Filter Simulator (p.79) 5 Custom Image (p.74) 19 Shake Reduction/Movie 6 Highlight Correction SR (p.76) 20 AF Mode (p.60, p.62) 7 Shadow Correction 21 Shutter Mode Selection (p.76) (p.52) 8 Slow Shutter Speed NR 22 File Format (p.48) (p.50) 23 JPEG Recorded Pixels 9 High-ISO NR (p.55) (p.48)/Movie Recorded 10 Clarity (p.78) Pixels (p.48) 11 Skin Tone (p.78) 24 Wi-Fi (p.94) 12 Digital Filter (p.75) 25 AF Active Area (p.60, 13 HDR Capture (p.77) p.62) 14 Pixel Shift Resolution 26 Focus Peaking (p.61) (p.78) 27 AE Metering (p.57) 15 When shooting with Live View Shooting Info Display Standard The Live View image and the settings for You can change the type of Information shooting with Live View are displayed. information displayed in standby Display (p.14) 1 mode by pressing G while the 110240002SStatusta4tu0s SScreen0creen
Introduction Electronic The same electronic level as when shooting with control panel is displayed. Use CD Level the viewfinder is displayed. to select the type and press E. 9999999999 No Certain icons, such as those for the capture Information mode and drive mode, are not displayed. When shooting with the viewfinder Display Status Displays the settings for shooting with the t Memo Screen viewfinder. (p.14) • The status screen is displayed when the camera is turned off Displays the camera and on again. If [Shooting Info Display] is set to Z (On) in angle. [Memory] of the A5 menu, the screen selected on the A bar scale indicating Shooting Info Display selection screen appears when the the horizontal camera camera is turned off and on again. (p.110) angle appears at the • When [LCD Display Options] is assigned to the function dial, center of the screen, 11//225050 FF5.65.6 11600600 00.0.0 Electronic you can switch the display using the Smart Function. (p.21, and a bar scale Example: Level Tilted 1.5° to the left (yellow) p.105) indicating the vertical Vertically level (green) camera angle appears on the right side. When the angle exceeds the range that can be displayed in each scale, the indicator segments of the scale are displayed in red. Display Off Nothing is displayed on the monitor. Displays the current latitude, longitude, N 336°45.410'6°45.410' WW140°02.000'140°02.000' 0° altitude, direction, 889m9m
Coordinated Universal 002/02/20172/02/2017 Time (UTC), capture 110:00:000:00:00 Electronic mode, and exposure 11//225050 FF5.65.6 11600600 00.0.0 Compass value. Turn the camera off and on again to return to the status screen. Available only when the optional GPS unit is attached to the camera and is operating. (p.121)
16 Playback Mode Detailed Information Display
The captured image and shooting information are displayed in Still pictures single image display of the playback mode. 1100-000100-0001 2 3 4 5 6 1 Press G to change the type of information displayed in 1 7 10
±0 12 Introduction single image display. Use CD to select the type and press E. ++1.01.0 ±0 8 9 11 11//22000000 FF2.82.8 110240002400 ++1.51.5 ±0 13 14 15 16 1100-000100-0001 1100-000100-0001 38 55000K000K GG1A11A1 ±0 17 18 19 20 21 22 G ±0 23 24 25 26 27 28 29 30 31 SStandardtandard InformationInformation DDisplayisplay 555.0mm5.0mm 32 33 34 35 36 37 002/02/20172/02/2017 110:300:30 39 40
Movie 11//22000000 FF2.82.8 220000 ++0.30.3 11//22000000 FF2.82.8 220000 ++0.30.3 1100-000100-0001 3 45 6 Single image display Playback Info Display 1 7 42 (Standard Information Display) selection screen 110'10"0'10" ±0 41 ±0 11 11//112525 FF8.08.0 11600600 ++1.51.5 13 14 15 16 ±0 38 Standard Captured image, file format, exposure 55000K000K GG1A11A1 ±0 17 18 19 ±0 Information parameters, and operation guide indicators 28 29 31 Display are displayed. 555.0mm5.0mm 32 33 43 37 002/02/20172/02/2017 110:300:30 39 40 Detailed Detailed information on how and when the Information image was taken is displayed. (p.17) BA Display Page 2 Captured image and brightness histogram Histogram 1100-000100-0001 2 3 45 6 are displayed. (p.18) 1 Display 45 Not available during movie playback. 44 00mm 47 46 RGB Captured image and RGB histogram are 1123°23° 48 44 Histogram displayed. (p.18) N 336°45.410'6°45.410' 002/02/20172/02/2017 49 51 Display Not available during movie playback. WW140°02.000'140°02.000' 110:00:000:00:00 50 39 No Information Only the captured image is displayed. Display 1 Captured image 10 Focus Method (p.59) t Memo 2 Rotation information 11 AE Metering (p.57) 12 Focusing area (AF point) • You can set overexposed areas to blink red in Standard (p.84) Information Display, Histogram Display, and No Information 3 Capture mode (p.48) (p.60) Display. Set in [Highlight Alert] of [LCD Display] in the B1 4 Wi-Fi™ connection 13 Shutter speed menu. (p.31) status (p.93) 14 Aperture value • The screen selected on the Playback Info Display selection 5 Protect setting (p.110) 15 Sensitivity (p.54) screen is displayed in playback mode when the camera is 6 Folder number-File 16 EV Compensation (p.56) turned off and on again. If [Playback Info Display] is set to Y number (p.111) 17 White Balance (p.72) (Off) in [Memory] of the A5 menu, the Standard Information 7 Drive Mode (p.64) 18 White Balance fine- Display always appears first when the camera is turned on. 8 Flash Mode (p.57) tuning (p.72) (p.110) 9 Flash Exposure 19 Digital Filter (p.75) • When [LCD Display Options] is assigned to the function dial, you can switch the display using the Smart Function. (p.21, p.105) Compensation (p.57) 17 20 HDR Capture (p.77)/ 33 JPEG Recorded Pixels Histogram Display Pixel Shift Resolution (p.48)/Movie Recorded (p.78) Pixels (p.48) Use AB to switch between the brightness histogram and RGB 21 Clarity (p.78) 34 JPEG Quality (p.48) histogram. 1 22 Skin Tone (p.78) 35 Color Space (p.48)
Introduction 23 Distortion Correction 36 Color Moiré Correction Brightness histogram (p.77) (p.87) 1342 24 Peripheral Illumination 37 Lens focal length 1100-000100-0001 1 Histogram (Brightness) 5 Correction (p.77) 38 Custom Image (p.74) 2 RGB histogram/ 25 Lateral Chromatic 39 Operation guide Brightness histogram Aberration Adjustment 40 Shooting date and time 3 Protect setting (p.77) 41 Length of time of the 4 Folder number-File 26 Diffraction Correction recorded movie 11//22000000 FF2.82.8 220000 ++0.30.3 number (p.77) 42 Recording Sound Level 6 7 8 9 10 5 Save RAW Data 27 Color Fringe Correction (p.53) 6 File Format BA (p.90) 43 Framerate (p.48) 7 Shutter speed 28 Highlight Correction 44 Tampered image 8 Aperture value 1 5 2 34 (p.76) warning 9 Sensitivity 29 Shadow Correction 45 Photographer (p.113) 1100-000100-0001 10 EV Compensation 11 Histogram (R) (p.76) 46 Copyright Holder (p.113) 11 12 Histogram (G) 30 AA Filter Simulator (p.79) 47 Altitude 12 13 Histogram (B) 31 Shake Reduction/ 48 Lens direction 13 Horizon Correction/ 49 Latitude 11//22000000 FF2.82.8 220000 ++0.30.3 Movie SR 50 Longitude 6 7 8 9 10 32 File Format (p.48) 51 Universal Coordinated Time RGB histogram
18 14 Multi-exposure (p.69) 18 EV Compensation Viewfinder 15 AE Metering (p.57) (p.56)/Bracketing (p.66) 16 Shake Reduction 19 File Format (p.48) When shooting with the viewfinder, information appears in the 17 Flash Exposure viewfinder. Compensation (p.57) 1
2 3 Introduction t Memo • The information is displayed in the viewfinder when 0 is pressed halfway, or during the meter operating time (default setting: 10 sec.). You can change the meter 1 1 operating time in [3 Meter Operating Time] of the E1 menu. (p.34) • The AF point in use for autofocus appears in red (Superimpose AF Area) when 0 is pressed halfway. 4 5 610117 8 9 12 You can turn this function off in [Superimpose AF Area] of [Viewfinder Overlay] in the A5 menu. (p.26) • You can adjust the viewfinder image sharpness using the diopter 13 14 15 16 17 18 19 adjustment lever. If it is difficult to move the diopter adjustment lever, 1 AF frame (p.45) 11 Sensitivity (p.54)/ lift up and remove the eyecup. 2 Spot metering frame Exposure compensation Adjust the diopter setting until the (p.57) value/Image storage AF frame in the viewfinder looks 3 AF point (p.60) capacity/Wireless mode sharp and clear. 4 Flash indicator (p.57) channel (p.120)/AF 5 Focus Method (p.59) Active Area (p.60) 6 Shutter speed/AF Mode S Auto (27 AF (p.60)/Exposure time for Points) timed exposure in M M Zone Select mode/Number of shots N Select for Bracketing O Expanded Area 7 Aperture value/Bracket AF (S) value for Bracketing P Expanded Area 8 Focus indicator (p.45) AF (M) 9 EV bar scale/Electronic Q Expanded Area Level (p.20) AF (L) 10 ISO/ISO AUTO R Spot 12 AE Lock 13 Change AF Area (p.60)
19 Electronic Level How to Change Function Settings You can check whether the camera is 1 tilted by displaying electronic levels. The electronic level for the horizontal Introduction Using the Direct Keys camera angle can be displayed in the viewfinder, and the electronic levels Press ABCD in standby mode. for the vertical and horizontal camera A Sensitivity p.54 angles can be displayed on the Live View screen. (p.14) Use h to turn the display on or off. B White Balance p.72 C Examples of Electronic Level in the Viewfinder Flash Mode p.57 D Drive Mode p.64
When level (at 0°)
When tilted 5° to the left
When held vertically and tilted 3° to the right
t Memo • You can assign a different function to h (Y). Also, you can assign [Electronic Level] to X or Z. (p.102) • You can select whether to display the electronic levels in [Viewfinder Overlay] and [Live View] of the A5 menu. (p.26)
20 Using the Smart Function Using the Control Panel
You can easily change settings with Press G in standby mode. two dials: the function dial and the 1 Use ABCD to select an item. 1 setting dial. Use the function dial (1) Introduction to select the desired function, and HDRHDR CaptureCapture 9999999999 use the setting dial (2) to change its 2 OffOff setting value.
The following functions can be selected. Use R to change settings.
Function E Function Page 002/02/20172/02/2017 110:230:23 Press to make detailed Dial settings. R Disables the setting dial operation. – AE Changes the AE Metering method. p.57 HDR Changes the capture type of HDR Capture. p.77 Use R to change settings. Changes the shooting speed for CH/CL p.65 Continuous Shooting. HHDRDR CaptureCapture 9999999999 OffOff Changes the image finishing tone for C1 p.74 Custom Image (default setting). Changes the capture type of AA Filter C2 p.79 Simulator (default setting). Use AB to switch between items. Changes the brightness of the monitor C3 p.108 CCancelancel OOKK (default setting). Press E to confirm the selected item You can assign functions to C1, C2, and C3 in [Button Press F to and return to the control panel. Customization] of the A5 menu. (p.105) cancel the setting operation. The assigned functions can be CCustomustom IImagemage checked on the status screen or Live View screen when the function dial or t Memo setting dial is turned. • The functions that can be selected vary depending on the current camera settings. 9999999999 • If no operations are made within approximately 1 minute while the control panel is displayed, the camera returns to standby mode.
21 Customizing the Control Panel
The functions displayed on the control panel can be 1 customized. Some functions in the A, C, and D menus can be saved as Introduction control panel items. Refer to “Menu List” (p.24) for details on the functions that can be saved.
1 Press G in standby mode. The control panel appears.
2 Press Z. The customization screen appears.
3 Use ABCD to select the SelectSelect tthehe llocationocation ooff tthehe itemitem yyouou wwantant ttoo cchangehange function to change. Press M to reset to the default settings.
RReseteset OOKK
4 Press E. Selectable functions are displayed in the pop-up menu.
5 Use AB to select the CustomCustom IImagemage AFAF ActiveActive AreaArea function to save. Select [--] if you do not want to save any function.
CCancelancel OOKK
6 Press E. The screen of Step 3 reappears.
7 Press Z. The control panel reappears.
8 Press F. The camera returns to standby mode. 22 Using the Menus
Most functions are set from the menus. 1 1 Use Q to change the menu category. Introduction CCustomustom IImagemage AAFF withwith VViewfinderiewfinder AAFF wwithith LLiveive VViewiew AAFF AssistAssist LLightight Use AB to select an item. AAEE MMeteringetering IISOSO AAUTOUTO SSettingetting PProgramrogram LLineine Menu tabs EExitxit Use R to switch 3 between menu tabs. 1 CClaritylarity CCustomustom IImagemage SSkinkin TToneone Press F to exit the AAFF withwith VViewfinderiewfinder DDigitaligital FFilterilter AAFF wwithith LLiveive VViewiew Press D to display HHDRDR CCaptureapture menu screen. AAFF AssistAssist LLightight the submenu. PPixelixel SShifthift RResolutionesolution AAEE MMeteringetering AASTROTRACERSTROTRACER D IISOSO AAUTOUTO SSettingetting Press to display the PProgramrogram LLineine pop-up menu. EExitxit EExitxit
3 AAFF wwithith LLiveive VViewiew CClaritylarity AAFF AActivective AArearea SSkinkin TToneone FFocusocus PPeakingeaking DDigitaligital FFilterilter AAF.SF.S SSettingetting HHDRDR CCaptureapture Use AB to select an item. PPixelixel SShifthift RResolutionesolution AASTROTRACERSTROTRACER
CCancelancel OOKK
Press E to confirm Press F to return to the previous screen. Press F to cancel the selected item. the pop-up menu.
t Memo • For the Custom Setting menus (E menus), you can display the setting screen of the next item in order of the menu list by turning R while the submenu of the currently selected item is displayed on the monitor. • Press F to display the first tab of the most appropriate menus for the camera settings at that time. To display the menu tab last selected first, set in [21 Save Menu Location] of the E3 menu. • The settings changed with the menus, direct keys, Smart Function, control panel, and playback mode palette are returned to their default values with [Reset] of the D5 menu. To reset the setting values of the Custom Setting menu items to the defaults, use [Reset Custom Functions] of the E4 menu. (Some settings do not apply.)
23 Menu List
1 Rec. Mode Menus Introduction
Item Function Default Setting Page Sets the image finishing tone such as color and contrast Custom Image *1 *2 Bright p.74 before shooting an image. AF Mode *1 *2 Selects the autofocus mode for shooting with the viewfinder. x p.60 Selects the area to adjust the focus for shooting with the Auto AF Active Area *1 *2 p.60 viewfinder. (27 AF Points) Sets the action priority for when the autofocus mode is set to AF.S Setting Focus-priority x and 0 is fully pressed. AF with 1st Frame Action in Sets the action priority for the first frame when the autofocus Auto Viewfinder AF.C mode is set to y and 0 is fully pressed. Sets the action priority during Continuous Shooting when the p.59 Action in AF.C Cont. Auto autofocus mode is set to y. Maintains the focus for a certain amount of time when the Hold AF Status subject happens to move out of the selected focusing area Low after being focused. *1 *2 A1 AF Active Area Selects the area to adjust the focus for shooting with Live View. Face Detection p.62 AF with Emphasizes the outline and contrast of the subject in focus Focus Peaking *1 *2 Off Live View and makes it easier to check the focus. p.61 AF.S Setting Sets the action priority for when 0 is fully pressed. Focus-priority AF Assist Light *1 Illuminates the assist light when autofocusing in dark locations. On p.60 Selects the part of the sensor to use for measuring brightness AE Metering *1 Multi-segment p.57 and determining the exposure. ISO Range Sets the upper limit value for ISO AUTO. ISO 6400 (Maximum) *1 ISO Range Sets the lower limit value for ISO AUTO. ISO 100 ISO AUTO (Minimum) p.55 Setting ISO Sensitivity Sets whether to set the minimum shutter speed automatically AUTO Options *1 or manually. Minimum Shutter Selects the shutter speed option or sets the minimum shutter Std. Speed speed. 24 Item Function Default Setting Page Program Line *1 *2 Selects the Program Line setting. Std. p.50 Temporarily changes the exposure mode when the mode dial Exposure Mode G A1 Exposure is set to one of the modes from O to 5. 1 *3 p.109 Mode Selects the Program Line setting when the mode dial is set to Introduction Program Line Std. one of the modes from O to 5. Switches between the mechanical shutter and the electronic Mechanical Shutter Mode Selection *1 *2 p.52 shutter. Shutter File Format *1 Sets the file format of images. JPEG JPEG Recorded Sets the recording size of JPEG images. q Image Pixels *1 *2 Capture p.48 JPEG Quality *1 Sets the quality of JPEG images. m Settings RAW File Format Sets the RAW file format. PEF A2 Color Space Sets the color space to use. sRGB Highlight Expands the dynamic range and prevents overexposed Auto D-Range Correction *1 areas from occurring. p.76 Settings Shadow Expands the dynamic range and prevents underexposed Auto Correction *1 areas from occurring. Slow Shutter Speed Sets the Noise Reduction setting when shooting with a slow Auto p.50 Noise NR *1 shutter speed. Reduction Sets the Noise Reduction setting when shooting with a high High-ISO NR *1 Auto p.55 ISO sensitivity. Changes the clarity of images using an image processing Clarity *1 ±0 p.78 program. Enhances the skin tone of the subject in the image using an Skin Tone *1 Off p.78 image processing program. Digital Filter *1 Applies a digital filter effect when taking pictures. No Filter p.75 HDR Capture *1 Off HDR A3 Bracket Value Makes settings for high dynamic range shooting. ±2EV p.77 Capture Auto Align On Pixel Shift Pixel Shift Off Resolution Resolu- Merges multiple images and outputs a high-definition image. p.78 tion Motion Correction *1 On ASTROTRACER *1 Makes settings to track and capture celestial bodies. Off p.121 25 Item Function Default Setting Page Applies a low-pass filter effect using the Shake Reduction AA Filter Simulator *1 *2 Off p.79 mechanism. 1 Shake Reduction *1 Activates the Shake Reduction function. On –
Introduction Horizon Correction *1 Corrects horizontal tilt when in A mode. Off – Allows you to adjust the composition of your image using the Composition Adjust. *1 Off p.80 Shake Reduction mechanism. Distortion Reduces distortions occurring due to lens properties. Off Correction *1 A4 Peripheral Illumin. Reduces peripheral light fall-off occurring due to lens Off Lens Corr. *1 properties. p.77 Correction Lat-Chromatic-Ab Reduces lateral chromatic aberrations occurring due to lens On Adj *1 properties. Diffraction Corrects blur caused by diffraction when using a small On Correction *1 aperture. Sets the focal length when using a lens of which focal length Input Focal Length *1 35mm p.119 information cannot be obtained. Electronic Level *1 Displays the electronic level at the bottom of the viewfinder. Off p.20 Viewfinder Superimpose AF Overlay Displays the active AF point in red in the viewfinder. On p.19 Area Sets the type and color of the grid lines displayed during Live Grid Display *1 *2 Off, Black View. Electronic Level *1 Displays the electronic level during Live View. On Live View Histogram Display Displays the histogram during Live View. Off p.46 Highlight Alert Sets overexposed areas to blink red during Live View. Off A5 Cuts down on the Live View screen flicker by setting the Flicker Reduction 50Hz power frequency. Display Time Sets the Instant Review display time. 1sec. Zoom Review Displays the magnified image during Instant Review. On Instant Save RAW Data Saves the RAW data during Instant Review. On p.45 Review Delete Deletes the displayed image during Instant Review. On Histogram Display Displays the histogram during Instant Review. Off Highlight Alert Sets overexposed areas to blink red during Instant Review. Off
26 Item Function Default Setting Page Displays operation guides on the status screen and Live Guide Display On p.45 Other View screen when the buttons and dials are operated. Display Sets the display color of the status screen, control panel, and Settings Display Color 1 p.43 1
menu cursor. Introduction One Push Fx1 Button Sets the function for when X is pressed. File Format Electronic Fx2 Button Sets the function for when Y is pressed. Level p.102 EV Fx3 button Sets the function for when Z is pressed. Compensation AF/AE-L Button Sets the function for when f is pressed. Enable AF1 C1 Custom Image AA Filter Function C2 Button Assigns the functions to C1, C2, and C3 of the function dial. Simulator p.105 Dial Customi- Outdoor View C3 zation Setting G I, J, XG A5 H –, ISO, – I I, –, – E-Dial Sets the Q / R / M operation for each exposure mode. J –, J, – Program- p.106 ming K I, J, GLINE L I, J, GLINE Rotation Reverses the effect obtained when Q or R is turned. Rotate Right Direction Sensitivity On EV Compensation On Flash Mode On Flash Exposure Determines which settings to save when the power is turned On Memory Comp. p.110 off. Drive Mode On White Balance On Custom Image On Clarity Off 27 Item Function Default Setting Page Skin Tone Off Digital Filter Off 1 HDR Capture Off
Introduction Pixel Shift Off Resolution Composition Adjust. On Shooting Info Off Display Determines which settings to save when the power is turned Memory p.110 Playback Info off. On Display Outdoor View Off Setting Night Vision LCD Off Display Operation Control A5 On Lock HDR LANDSCAPE, You can save frequently used capture settings to O to 5 MACRO, Save Settings of the mode dial. ASTROPHOTO, MANUAL LENS, – Save HDR USER LANDSCAPE, p.108 Mode Changes the names of the saved USER modes to display on MACRO, Rename USER Mode the monitor. ASTROPHOTO, MANUAL LENS, USER5 Check Saved Displays the settings saved in USER modes. Settings – Reset USER Mode Resets all the settings saved in USER modes to the defaults. *1 Available as a control panel item. *2 Available as a function of the function dial. *3 The function appears only in O to 5 modes.
28 Movie Menus
Item Function Default Setting Page 1 *1 *2 Sets the image finishing tone such as color and contrast Custom Image Bright p.74 Introduction before shooting a movie. AF Mode *1 *2 Selects the autofocus mode for movie recording. x p.62 Multiple AF AF with AF Active Area *1 *2 Selects the area to adjust the focus for movie recording. p.62 Points Live View Emphasizes the outline and contrast of the subject in focus Focus Peaking *1 *2 Off p.61 and makes it easier to check the focus. C1 Illuminates the assist light when autofocusing in dark AF Assist Light *1 On p.60 locations. Selects the part of the sensor to use for measuring brightness AE Metering *1 Multi-segment p.57 and determining the exposure. Movie Recorded Pixels *1 *2 Sets the number of recorded pixels of the movie. u Capture p.48 *1 Settings Framerate Sets the frame rate of the movie. 30p Recording Sound Level *1 Sets the sound volume level for recording. Auto p.53 Highlight Expands the dynamic range and prevents overexposed Auto D-Range Correction *1 areas from occurring. p.76 Settings Shadow Expands the dynamic range and prevents underexposed Auto Correction *1 areas from occurring. Digital Filter *1 Applies a digital filter effect when recording a movie. No Filter p.75 Movie SR *1 Activates the Shake Reduction function. On – C2 Sets the type and color of the grid lines displayed during Live Grid Display *1 *2 Off, Black View. Electronic Level *1 Displays the electronic level during Live View. On Live View Histogram Display Displays the histogram during Live View. Off p.14 Highlight Alert Sets overexposed areas to blink red during Live View. Off Cuts down on the Live View screen flicker by setting the Flicker Reduction 50Hz power frequency.
29 Item Function Default Setting Page AF/AE-L Button Sets the function for when f is pressed. Enable AF1 p.102 m –, –, – 1 j I, –, GLINE Button Introduction E-Dial n Sets the Q / R / M operation for each exposure mode. –, J, GLINE C2 Customi- Program- p.106 zation p I, J, GLINE ming o I, J, GLINE Rotation Reverses the effect obtained when Q or R is turned. Rotate Right Direction *1 Available as a control panel item. *2 Available as a function of the function dial.
30 Playback Menu
Item Function Default Setting Page 1 Display Duration Sets an image display interval. 3sec. Introduction Screen Effect Sets a transition effect when the next image is displayed. Off Slideshow Starts a slideshow again from the beginning after the last p.84 Repeat Playback Off image is displayed. Auto Movie Playback Plays back movies during a slideshow. On Protect All Images Protects all stored images at once. – p.110 Delete All Images Deletes all stored images at once. – – B1 Quick Zoom Sets the initial magnification when magnifying images. Off p.47 Playback Sound Volume Sets the sound volume during movie playback. 10 p.54 Rotates images which were captured with the camera held Auto Image Rotation vertically or of which the rotation information has been On p.84 changed. LCD Grid Display Sets the type and color of grid lines. Off, Black p.47 Display Sets overexposed areas to blink red in Standard Information Highlight Alert Display, Histogram Display, and No Information Display of Off p.17 the playback mode.
31 Set-up Menus
1 Item Function Default Setting Page Language/W Changes the display language. English p.42 Introduction Date Adjustment Sets the date and time and the display format. 01/01/2017 p.43 Switches between the date and time display of your World Time Hometown p.114 hometown city and that of a specified city. Text Size Magnifies the text size when selecting a menu item. Std. p.42 Volume Sets the sound volume of beep sounds. 3 – Sets whether to make a beep sound when the subject is In-focus On p.45 focused. Sets whether to make a beep sound when the exposure AE-L On p.51 value is locked with f. Sets whether to make a beep sound during the countdown for Self-timer On p.65 Self-timer shooting. D1 Sets whether to make a beep sound during Mirror Lock-up Mirror Up On p.69 Shooting. Sound Sets whether to make a beep sound when the function of the arrow Effects Change AF Area On p.61 keys (ABCD) is switched to AF area change mode. One Push File Sets whether to make a beep sound when the file format is On p.103 Format changed with X, Y, or Z. Sets whether to make a beep sound when the Electronic Electronic Level On p.20 Level display is turned on or off with X, Y, or Z. Sets whether to make a beep sound when the Wi-Fi™ Wi-Fi On p.94 function is turned on or off with X. Night Vision LCD Sets whether to make a beep sound when the Night Vision On p.122 Display LCD Display feature is turned on or off with X. LCD Display Settings Sets the brightness, saturation, and color adjustment of the monitor. 0 p.107 Outdoor View Setting *1 *2 Adjusts the brightness of the monitor for outdoor shooting. Off p.108 Changes the monitor display color to red for shooting in a Night Vision LCD Display *1 Off p.122 dark place such as night-time shooting. D2 Sets whether to make the self-timer lamp blinking during the Self-timer On Indicator countdown for the drive mode [Self-timer]. p.108 Lamps Sets whether to light up the indicator lamps on the GPS unit GPS LED Indicators On when it is attached to the camera. 32 Item Function Default Setting Page Wi-Fi *1 Activates the Wi-Fi™ function. Off p.94 GPS/E- GPS Time Sync Automatically adjusts the date and time settings. On p.121 Compass Calibration Performs a calibration of direction information. – 1
Sets the USB connection mode when connecting to a Introduction USB Connection MSC p.92 computer with a commercially available USB cable. D3 Sets the output format when connecting to an AV device via Video Out Resolution Auto p.85 the video output terminal. Sets the external input device connected to the microphone/ External Input Devices *1 Auto Select p.53 cable release terminal. Sets the time until the camera turns off automatically if no Auto Power Off 1min. p.42 operations are made for a certain period of time. Create New Folder Creates a new folder on the memory card. – p.111 Folder Name Sets the folder name in which images are stored. Date p.111 File Name Sets the file name assigned to an image. IMGP, _IMG p.112 Sequential Continues the sequential numbering for the file name when a On Numbering new folder is created. D4 File No. p.113 Resets the file number setting and returns to 0001 each time Reset File Number – a new folder is created. Sets the photographer and copyright information embedded Copyright Information Off p.113 in the Exif data. Format Formats a memory card. – p.44 Pixel Mapping Maps out and corrects defective pixels on the sensor. – p.123 Dust Removal Cleans the sensor by applying high-frequency (ultrasonic) vibrations. On, On p.123 Locks the mirror in the up position for cleaning the sensor Sensor Cleaning –p.124 with a blower. Select Battery Sets the battery priority for when using the optional battery grip. Auto Select p.39 Displays the certification marks of conformance to wireless D5 Certification Marks –p.138 technical standards. Displays the camera’s firmware version. You can check the Firmware Info/Options –– current firmware version before running an update. Resets the settings of the direct keys and Smart Function and Reset for the items of the A menus, C menus, B menu, D –– menus, control panel, and playback mode palette. *1 Available as a control panel item. *2 Available as a function of the function dial. 33 Custom Setting Menus
1 Item Function Default Setting Page 1 EV Steps Sets the adjustment steps for the exposure. 1/3 EV Steps p.50 Introduction 2 Sensitivity Steps Sets the adjustment steps for the ISO sensitivity. 1 EV Step p.54 3 Meter Operating Time Sets the meter operating time. 10sec. p.19 Automatically compensates the exposure when the correct 4 Auto EV Compensation Off – exposure cannot be achieved with the current settings. E1 Sets whether to link the exposure value and the AF point in 5 Link AE and AF Point Off p.57 the focusing area. Sets whether to lock the exposure value when the focus is 6 AE-L with AF Locked Off – locked. Sets the camera operation when 0 is pressed in M 7 Bulb (B) Mode Options Type1 p.51 mode. Sets whether to release the shutter while the built-in flash is 8 Release While Charging Off p.58 being charged. 9 Bracketing Order Sets the order for Bracketing shooting. 0 - + p.66 10 One-Push Bracketing Shoots all frames with one press of the release in Bracketing. Off p.66 Sets whether to start counting the time of interval from when 11 Interval Shooting Options exposure starts or when exposure ends for Interval Shooting, Interval p.71 Interval Composite, and Interval Movie Record. E2 Sets whether to lock the focus position used when the first picture is taken or perform autofocus for each exposure for Locks focus at 12 AF in Interval Shooting p.71 Interval Shooting, Interval Composite, Interval Movie Record, 1st exposure and Star Stream. Sets whether to automatically fine-tune the white balance 13 WB Adjustable Range when the light source is specified for the white balance Fixed p.72 setting. Sets the tungsten light color tone when the white balance is Strong 14 AWB in Tungsten Light p.72 set to [Auto White Balance]. Correction
34 Item Function Default Setting Page Auto White 15 WB When Using Flash Sets the white balance setting when using a flash. p.72 Balance Sets the adjustment steps for the Color Temperature option 16 Color Temperature Steps Kelvin p.73 1
of the white balance. Introduction Temporarily disables specific functions or operations of 17 Enable/Disable Control Type1 p.51 buttons and dials. Selects the operation of the arrow keys (ABCD) when the E3 18 4-way Controller Settings focusing area selection mode is set to one of some select- Type1 p.61 type options. Automatically turns off the Shake Reduction function when Enable Auto 19 Auto SR Off p.64 the drive mode is set to [Self-timer]. SR Off 20 Save Rotation Info Saves rotation information when shooting. On p.84 Saves the last menu tab displayed on the monitor and Reset Menu 21 Save Menu Location p.23 displays it again the next time F is pressed. Location Enables Catch-in Focus shooting when a manual focus lens 22 Catch-in Focus is attached. The shutter is released automatically when the Off p.119 subject comes into focus. Allows you to precisely fine-tune your lenses with the 23 AF Fine Adjustment Off p.63 E4 camera’s autofocus system. Enables the shutter to release when the lens aperture ring is 24 Using Aperture Ring Disable p.118 set to a position other than 9 (Auto). Resets the setting values of the Custom Setting menu items Reset Custom Functions –– to the defaults.
35 Attaching the Strap Using the Optional Grip The Grip S O-GP167 is installed on the camera. To replace it with 1 Pass the end of the strap the optional Grip M O-GP1671 or through the triangular ring. Grip L O-GP1672, fully loosen the grip mounting screw using the hex 2 wrench supplied with the optional Getting Started grip, and remove the grip. (The screw cannot be removed from the grip.) Attach the grip to the camera so that the tabs of the grip are engaged in the slots on the camera, and securely tighten the grip mounting screw. The optional Battery Grip D-BG7 Secure the end of the strap 2 is supplied with the Grip L on the inside of the clasp. O-GP1672.
36 u Caution Attaching a Lens • When attaching or removing the lens, choose an environment that is relatively free of dirt and dust. • Keep the body mount cap attached on the camera when a 1 Make sure that the camera is turned off. lens is not attached. • Be sure to attach the lens mount cover and lens cap to the 2 Remove the body mount lens after removing it from the camera. 2 cap (1) and lens mount • Do not insert your fingers inside the lens mount of the camera cover (2). or touch the mirror. Getting Started Turn the body mount cap • The camera body and lens mount incorporate lens counterclockwise while pressing information contacts. Dirt, dust, or corrosion may damage the the lens unlock button (3). 3 electrical system. Please contact your nearest service center After removing the cover, be sure for professional cleaning. to put the lens down with the lens • When a retractable lens is attached and is not extended, you mount side facing upward. cannot take pictures or use some functions. If the lens is retracted during shooting, the camera stops working. Refer to 3 Align the lens mount “How to Use a Retractable Lens” (p.46) for details. indexes (red dots: 4) on • We assume no responsibility nor liability for accidents, the camera and the lens, damages, and malfunctions resulting from the use of lenses 4 and secure by turning the made by other manufacturers. lens clockwise until it t Memo clicks. • Refer to “Functions Available with Various Lenses” (p.116) for details on the functions of each lens.
4
To remove the lens Attach the lens cap, and then turn the lens counterclockwise while pressing the lens unlock button.
37 u Caution Using the Battery and Charger • Do not use the battery charger D-BC109 to charge batteries other than the battery D-LI109. Charging other batteries may Use the battery D-LI109 and battery charger D-BC109 cause damage or heating. exclusively developed for this camera. • Replace the battery with a new one in the following cases: Note: AC plug cord • If the indicator lamp blinks or does not light after the battery 2 UL Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord, rated is inserted correctly 125 V, 7 A, minimum 6 ft. (1.8 m) • If the battery starts to run down more quickly even after Getting Started being charged (the battery may have reached the end of its service life) Charging the Battery t Memo 1 Connect the AC plug cord to the battery charger. • The maximum charging time is approximately 240 minutes (it depends on temperature and remaining battery power). Plug the AC plug cord into the power outlet. Charge the battery in a location where the temperature is 2 between 0°C and 40°C (32°F and 104°F). Battery charger Indicator lamp
AC plug cord
3 Face the A mark on the battery up, and insert it into the battery charger. Insert the battery into the battery charger at an angle, and then fit into place. The indicator lamp lights while charging and turns off when the battery is fully charged.
38 Inserting/Removing the Battery 3 Close the battery cover. u Caution • Insert the battery correctly. If the battery is inserted incorrectly, it may not be removed. • Wipe the electrodes of the battery with a soft dry cloth before inserting. 2
• Do not open the battery cover or remove the battery while the t Memo Getting Started power is on. • The battery level may not be displayed properly if the camera • Be careful as the camera or battery may become hot after the is used at low temperatures or when performing Continuous camera has been used continuously for a long period of time. Shooting for a long time. • Remove the battery when you do not use the camera for a • Battery performance temporarily decreases as the long time. The battery may leak and damage the camera if left temperature decreases. When using the camera in cold installed during prolonged periods of non-use. If the removed climates, have extra batteries at hand and keep them warm in battery is not used for six months or longer, charge the battery your pocket. Battery performance will return to normal at for about 30 minutes before storing it. Be sure to recharge the room temperature. battery every six to twelve months. • Have extra batteries ready when traveling overseas or taking • Store the battery in a location where the temperature will a lot of pictures. remain at or below room temperature. Avoid locations with • When using the optional Battery Grip D-BG7, you can set high temperatures. priority of the battery to use in [Select Battery] of the D5 • The date and time may be reset if you leave the battery out of menu. (p.33) the camera for long periods of time. If this happens, set the current date and time again. (p.42)
1 Open the battery cover. Slide the battery cover unlock lever (1) before opening the cover. 1
2 Face the A mark on the battery towards the lens mount side of the camera, and insert the battery until it locks into place. 2 To remove the battery, push the battery lock lever in the direction of 2. 39 Using the AC Adapter Inserting a Memory Card We recommend the use of the optional AC adapter kit K-AC167 when using the monitor for a long time or when connecting the The following memory cards can be used with this camera. camera to a computer. • SD Memory Card • SDHC Memory Card 2 1 Make sure that the camera is turned off, and • SDXC Memory Card In this manual, these cards are referred to as memory cards. Getting Started open the terminal cover. 1 Make sure that the camera is turned off. 2 Align the A marks on the DC terminal of the AC 2 Slide the memory card adapter and DC input cover in the direction of 1 terminal of the camera, and and then rotate it to open 1 connect. as shown by 2. 2
3 Connect the AC adapter to the AC plug cord, and plug the cord into the power outlet. 3 Insert a card all the way u Caution into the memory card slot • Make sure that the camera is turned off before connecting or with the memory card label disconnecting the AC adapter. facing toward the side with • Make sure that the connections are secure between the the monitor. terminals. The memory card or data may be corrupted if the connection to the power supply is lost while the card is being accessed. Push the memory card in once • Be sure to read the manual of the AC adapter kit before using and release to remove. the AC adapter.
4 Rotate the memory card cover as shown by 3, and slide it in the direction of 4 4. 3
40 u Caution • Do not remove the memory card while the card access lamp Adjusting the Angle of the Monitor (orange) is lit. • If the memory card cover is opened while the power is on, the You can adjust the monitor angle in vertical direction. camera turns off. Do not open the cover while the camera is in use. 1 Hold the camera grip with • Use this camera to format (initialize) a memory card that is your right hand and hold 2 unused or has been previously used on other devices. (p.44) the top of the monitor with Getting Started • Use a high-speed memory card when recording movies. If the write speed cannot keep up with the recording speed, writing your left hand. may stop during recording.
2 Slowly pull open the monitor until it stops.
3 Hold the bottom of the monitor and lift upward.
4 Adjust the angle. Perform Step 3 and then Step 2, towards directions opposite to the arrows, to retract the monitor. u Caution • Do not twist or apply strong force to the movable section. • Be careful not to hit the viewfinder part with the monitor. • Keep the monitor retracted when carrying the camera.
41 Initial Settings 4 Press B to select [DST] (daylight saving time), and use CD to select Y or Z. Turn the camera on and make the initial settings. 5 Press E. The camera returns to the [Initial Setting] screen. 2 Turning the Camera On B D Getting Started 6 Press to select [Text Size] and press . 1 Turn the main switch to [ON]. 7 Use AB to select [Std.] or IInitialnitial SSettingetting
The first time the camera is CH/C SStd.td.
[Large], and press E. LLargearge turned on after purchase, the C3 NNewew YYorkork Selecting [Large] increases the [Language/W] screen TTextext SSizeize text size of the selected menu appears. SSettingsettings completecomplete item. CCancelancel OOKK t Memo • The power automatically turns off when you do not perform Press B to select IInitialnitial SSettingetting any operations within a set period of time. (Default setting: 8 EEnglishnglish 1min.) You can change the setting in [Auto Power Off] of the [Settings complete] and NNewew YYorkork D3 menu. (p.33) press E. TTextext SizeSize SStd.td. The [Date Adjustment] screen SSettingsettings ccompleteomplete appears. Setting the Display Language CCancelancel OOKK
1 Use ABCD to select the desired language and press E. The [Initial Setting] screen IInitialnitial SSettingetting appears in the selected EEnglishnglish language. NNewew YYorkork Proceed to Step 6 if F TTextext SSizeize SStd.td. (Hometown) does not need to be SSettingsettings completecomplete changed. CCancelancel
2 Press B to move the frame to F and press D. The [F Hometown] screen appears.
3 Use CD to select a city. HHometownometown Use R to change the region. y Cities that can be selected as a hometown (p.131) NNewew YYorkork DDSTST 42 CCancelancel OOKK Setting the Date and Time Setting the LCD Display
1 Press D, and use AB to DDateate AAdjustmentdjustment 1 Use CD to select a color. LLCDCD DDisplayisplay select the date format. DDateate FFormatormat mmm/dd/yym/dd/yy Select the display color of the DDisplayisplay CColorolor 1 DDateate 001/01/20171/01/2017 status screen, control panel, and TTimeime 000:000:00 menu cursor from the colors 1 to SSettingsettings completecomplete 11// 2 12. 112525 CCancelancel OOKK CCancelancel OOKK Getting Started
2 Press D, and use AB to select [24h] or [12h]. 2 Press E. The camera switches to capture mode and is ready to take 3 Press E. a picture. The frame returns to [Date Format]. t Memo • You can change the language, text size, and date and time Press B, and then press D. 4 settings from the D1 menu, and the display color from [Other The frame moves to the month if the date format is set to Display Settings] of the A5 menu. (p.27, p.32) [mm/dd/yy].
5 Use AB to set the month. DDateate AAdjustmentdjustment Set the day, year, and time in the DDateate FFormatormat mmm/dd/yym/dd/yy same manner. DDateate 001/01/20171/01/2017 TTimeime 000:000:00 SSettingsettings completecomplete
CCancelancel OOKK
6 Press B to select [Settings DDateate AAdjustmentdjustment complete] and press E. DDateate FFormatormat mmm/dd/yym/dd/yy The [LCD Display] screen DDateate 002/02/20172/02/2017 TTimeime 110:000:00 appears. SSettingsettings completecomplete
CCancelancel OOKK
43 Formatting a Memory Card D4 Basic Shooting Operation
1 Press F. Take pictures in R (Scene Analyze Auto) mode in which The A1 menu appears. the camera analyzes shooting conditions and automatically sets the optimal shooting settings. 2 2 Use Q or R to display the D4 menu.
Getting Started Shooting with the Viewfinder 3 Use AB to select [Format] and press D. The [Format] screen appears. 1 Remove the front lens cap 4 Press A to select [Format] FFormatormat by pushing the top and and press E. AAllll ddataata wwillill bbee ddeletedeleted bottom portions as Formatting starts. When indicated in the formatting is completed, the D4 illustration. FFormatormat menu reappears. CCancelancel When a retractable lens is OOKK attached, extend the lens before turning the camera on. 5 Press F. y How to Use a Retractable Lens (p.46) u Caution • Do not remove the memory card while formatting, or the card Turn the camera on. may be damaged. 2
• Formatting deletes all data, both protected and unprotected. CL 3 Set the A/K/C switch to C3
t Memo A. C1 C2 • When a memory card is formatted, the volume label “KP” is assigned to the card. When the camera is connected to a computer, the memory card is recognized as a removable disk with the name “KP”.
4 Set the v/w switch to v.
44 5 Set the mode dial to R 7 Position the subject inside while pressing the mode the AF frame and press dial lock button. 0 halfway. The focus indicator (P) appears and you will hear a beep when
HDR the subject comes into focus.
AE
U3 CH/CL
U5 U2 2
B U1
M
AUTO C3 TAv
Av P C1 Sv C2 Tv y Sound Effects settings Focus indicator Getting Started (p.32)
8 Press 0 fully.
U3
U5 U2 The captured image is displayed on the monitor (Instant
B U1
Mode dial M AUTO
TAv Review). Av P lock button Sv Tv Available operations during Instant Review L Deletes the image. Dial indicator R to the right Magnifies the image.
The selected capture mode and SScenecene AnalyzeAnalyze AAutouto Z Saves the RAW data (only functions assigned to buttons/ 11// 225050 F 55.6.6 when a JPEG image was taken dials are displayed on the 11600600 and the data remains in the monitor (Guide Display). buffer). y Guide Display settings 9999999999 t Memo (p.27) • You can use f to focus on the subject. (p.59) • You can select whether to make a beep sound and change Look through the 6 the sound volume in [Sound Effects] of the D1 menu. (p.32) viewfinder to view the • You can set the operation and display settings for Instant subject. Review in [Instant Review] of the A5 menu. (p.26) When When using a zoom lens, turn the [Display Time] is set to [Hold], the Instant Review image is zoom ring to the right or left to displayed until the next operation. change the angle of view. u Caution • Some functions are not available in R mode.
45 How to Use a Retractable Lens 3 Shooting while Viewing the Live View Image
If the camera is turned on when a HDR AE
retractable lens, such as smc 1 Set the A/K/C switch to CH/CL PENTAX-DA L 18-50mm F4-5.6 C3 2 K in Step 3 of “Shooting DC WR RE, is attached and is not with the Viewfinder” (p.44). C1 C2 extended, an error message is 2 1 The Live View image is displayed displayed on the monitor. Turn the on the monitor. Getting Started zoom ring in the direction of 2 while pressing the button on the ring (1) to extend the lens. When retracting the lens, turn the zoom ring in the opposite direction to 2 while pressing the button on the ring and align 2 Position the subject inside the white dot to the position 3. the AF frame on the monitor and press 0 halfway.
The AF frame turns green and 11//22000000 FF2.82.8 11600600 99999999 you will hear a beep when the subject comes into focus. AF frame
Available operations E Magnifies the image. Use R to change the magnification (up to 16×). Use ABCD to change the area to display. Press M to return the display area to the center. Press E to return to 1× image display.
Subsequent steps are the same as shooting with the viewfinder. t Memo • You can change the Live View display settings in [Live View] of the A5 menu. (p.26) When [Grid Display] is assigned to the function dial, you can change the setting using the Smart Function. (p.21, p.105) • When [Image Magnification] is assigned to the function dial, you can magnify the image using the Smart Function in Step 2. (p.21, p.105)
46 Available operations Reviewing Images C/Q to the left Displays the previous image. D/Q to the right Displays the next image. You can review the captured image on the monitor. L Deletes the image. R Press 3. to the right Magnifies the image (up to 1 16×). Use ABCD to change the 2 area to display. Getting Started Press M to return the display area to the center. Press E to return to entire image display mode. The camera enters playback 1100-000100-0001 R to the left Switches to thumbnail display mode and the most recently mode (p.82). captured image is displayed (single image display). Z Saves the RAW data (only when a JPEG image was taken 11//22000000 FF2.82.8 220000 00.0.0 and the data remains in the buffer). 2 Review the captured image. G Changes the type of information displayed (p.17). B Displays the playback mode palette (p.81).
t Memo • When R is turned to the right to magnify the image, the magnification is displayed at the bottom right of the screen. You can set the initial magnification when magnifying images in [Quick Zoom] of the B1 menu. (p.31) • When Zv is displayed on the monitor, the JPEG image that was just taken can also be saved in RAW format (Save RAW Data). • You can display grid lines in single image display. Set in [Grid Display] of [LCD Display] in the B1 menu. (p.31) • You can change the [Grid Display], [LCD Display Options], [Image Magnification], and [Outdoor View Setting] settings using the Smart Function during playback when these features are assigned to the function dial. (p.21, p.105)
47 Configuring the Capture Settings Taking Still Pictures
Select the capture mode that suits the subject and shooting Image Capture Settings A2 conditions. The following capture modes are available on this camera. Set the file format for still pictures in [Image Capture Settings] of Capture Mode Function Page the A2 menu. R Automatically sets the optimal File Format JPEG, RAW, RAW+ (Scene Analyze p.44 3 shooting settings.
Shooting JPEG Recorded Auto mode) q, p, o, r Pixels G, H, I, J, Allows you to change the K L M JPEG Quality m, l, k , , shutter speed, aperture value, p.49 (Exposure modes) and sensitivity. RAW File Format PEF, DNG O Gives a bold and dramatic look Color Space sRGB, AdobeRGB (HDR LANDSCAPE) to landscape shots. t Memo Automatically selects the P • When [File Format] is set to [RAW+], a JPEG image and a optimal settings for macro (MACRO) RAW image with the same file number are saved at the same shooting. time. Adjusts the background black – Q • [PEF] of [RAW File Format] is a PENTAX original RAW file level and reproduces the (ASTROPHOTO) format. colors of stars faithfully. X • When you press and hold (default setting), a beep sounds Automatically selects the 4 and you can temporarily take pictures in another file format optimal settings for shooting (MANUAL LENS) (One Push File Format). (p.103) with manual focus lenses. • When [Recorded Pixels] is assigned to the function dial, you can change the number of recorded pixels for JPEG images t Memo or movies using the Smart Function. (p.21, p.105) • You can save frequently used exposure modes and capture settings to O to 5 and replace the preset settings with Movie Capture Settings C1 them. (p.108)
Set the file format for movies in [Movie Capture Settings] of the C1 menu. Recorded Pixels Frame Rate u 60i, 50i, 30p, 25p, 24p t 60p, 50p
48 Shooting in Exposure Modes 1 Set the mode dial to the desired exposure mode. Q or R appears on the x: Available #: Restricted : Not available × status screen for the value that 11// 225050 F 55.6.6 Change Change EV 110000 Change can be changed. Mode Shutter Aperture Compen- Sensitivity Speed Value sation G 9999999999 Program # *1 # *1 xx The value that can be changed is Automatic underlined in the viewfinder. 3
Exposure Shooting H During Live View, D appears for Sensitivity Priority x *2 x the value that can be changed. Automatic ×× Exposure I Shutter Priority 11//3300 FF4.54.5 110000 99999999 x xx Automatic × Exposure 2 Turn R. J The aperture value is changed in Aperture Priority J, K, L, or M mode. xxx Automatic × The sensitivity is changed in H Exposure mode. K Shutter & Aperture xx *3 x Priority Automatic × 3 Turn Q. Exposure The shutter speed is changed in L I, K, or L mode. xxx *2 x Manual Exposure M *4 xx *2 Bulb Exposure × × *1 You can set the value to change in [E-Dial Programming] of [Button Customization] in the A5 menu. (p.106) *2 [ISO AUTO] is not available. *3 Fixed to [ISO AUTO]. *4 When the timed exposure is enabled, shutter speeds ranging from 10 seconds to 20 minutes can be set. (p.51)
49 t Memo Reducing Noise when Shooting with a • The settings for the exposure can be specified in increments A2 of 1/3 EV steps. In [1 EV Steps] of the E1 menu, you can Slow Shutter Speed change the adjustment steps to 1/2 EV steps. When shooting with a slow shutter speed, you can reduce •In L mode, the difference from the correct exposure is image noise in [Slow Shutter Speed NR] of [Noise Reduction] in displayed on the EV bar scale while the exposure is adjusted. the A2 menu. • For each exposure mode (excluding M mode), you can set the camera operation for when Q or R is turned or M Applies Noise Reduction according to the shutter is pressed. Set in [E-Dial Programming] of [Button Auto speed, sensitivity, and internal temperature of the 3 Customization] in the A5 menu. (p.106) camera.
Shooting •In I or J mode, you can take pictures while automatically Applies Noise Reduction when the shutter speed is On changing shutter speed and aperture value. (p.67, p.68) slower than 1 second. u Caution Off Does not apply Noise Reduction at any shutter speed. • The correct exposure may not be obtained with the selected shutter speed and aperture value when the sensitivity is fixed Setting the Exposure Control Method A1 at a certain sensitivity. In [Program Line] of the A1 menu, you can specify how the exposure is controlled. A Auto Determines the appropriate settings. Sets to the basic program automatic B Standard exposure (all-around mode). Hi-speed C Prioritizes high shutter speeds. Priority DOF Priority Closes the aperture for a deep depth of D (Deep) field. DOF Priority Opens the aperture for a shallow depth of E (Shallow) field. Sets the sharpest aperture of the attached F MTF Priority lens when a DA, DA L, D FA, FA J, or FA lens is used. t Memo • The Program Line setting is enabled in the following situations. •In G or H mode • When GLINE is set for the M operation of K or L in [E- Dial Programming] of [Button Customization] in the A5 menu • When [Program Line] is assigned to the function dial, you can 50 change the setting using the Smart Function. (p.21, p.105) Checking the Depth of Field (Preview) Bulb Exposure When [Preview] is assigned to X, Y, or Z, you can check the depth of field before taking pictures. (p.104) 1 Set the mode dial to M. 2 Use R to set the Locking the Exposure aperture value. F 88.0.0 To lock the exposure before shooting, use the AE Lock 11600600 function. This function can be used by assigning [AE Lock] to X, Y, Z, or f. (p.102) 3 9999999999 Shooting
Disabling Operation Controls 3 To enable the timed exposure, press M, and Specific functions or operations of buttons and dials can be then use Q to set the exposure time. temporarily disabled to prevent misoperation during You can set the exposure time within the range from 10" to shooting by assigning [Operation Control Lock] to X, Y, 20'00". or Z. (p.102) Turning R while pressing the button in standby mode 4 Press 0. disables the functions or operations of the buttons and dials. While 0 is pressed, exposure continues. R Turning again enables the functions or operations of If the timed exposure is enabled in Step 3, the exposure them. ends when the set exposure time elapses after 0 is e is displayed on the status fully pressed. screen and Live View screen while the functions or operations t Memo of the buttons and dials are • You can start and end exposure also by pressing 0. Set disabled. in [7 Bulb (B) Mode Options] of the E1 menu. The functions or operations of 9999999999 • When performing the bulb exposure, use a tripod and mount buttons and dials to be disabled the camera on it securely. The use of the optional cable can be selected in [17 Enable/Disable Control] of the E3 release is recommended. (p.53) menu. u Caution Disables the functions or operations of the • The drive mode cannot be set to [Continuous Shooting], Type1 buttons and dials used to change the exposure [Bracketing], or [Interval Shooting]. settings in standby mode. Disables the functions or operations of Type2 ABCD, E, and F in standby mode.
51 Using the Electronic Shutter A2 Recording Movies A mechanical shutter has front and rear shutter curtains, which
AE DR
make noise and vibrate the camera when opening and closing 1 Set the A/K/C switch to CH/CL
to produce the exposure. C. C3
Use of an electronic shutter can reduce noise and vibrations C1 C2 during exposure, and furthermore, enables shooting with faster shutter speeds than a mechanical shutter.
To use only the electronic shutter of SShutterhutter MModeode SSelectionelection 3 the camera, select [Electronic SShutterhutter MModeode SSelectionelection Shooting Shutter] in [Shutter Mode Selection] The Live View image is Sound displayed. of the A2 menu. UUsesses mmechanicalechanical sshutterhutter oonlynly
CCancelancel OOKK
u Caution • [Electronic Shutter] cannot be selected in the following 999'99"9'99" situations. Recordable Time •In M mode • When the drive mode is set to [Interval Shooting] 2 Set the mode dial to the desired capture mode. • The following functions are not available when [Electronic The following settings are available depending on the Shutter] is selected. capture mode. • Flash discharge G I • Shake Reduction , , The camera operates in the selected J K L • Distortion can be produced in captured images when , , exposure mode. (When set to mode, the L shooting fast moving objects with fast shutter speeds using sensitivity can be changed.) The camera operates according to the saved the electronic shutter. O to 5 exposure mode. t Memo Other • Shooting with Live View when the electronic shutter is The camera operates in G mode. modes selected (p.46) can deliver quieter shooting with less mirror movement sound. 3 Use Q or R to set the exposure. • When [Shutter Mode Selection] is assigned to the function dial, you can change the setting using the Smart Function. 4 Focus on the subject. (p.21, p.105) In v mode, press 0 halfway. 5 Press 0 fully. Movie recording starts. In the upper left area of the monitor, “REC” blinks and the size of the recorded movie file is displayed. 52 6 Press 0 fully again. Using a Microphone or Cable Release Movie recording stops. You can connect a commercially Microphone/cable available stereo microphone to release terminal u Caution the microphone/cable release • When recording a movie with sound, camera operation terminal on the camera. Using an sounds are also recorded. When [AF Mode] of [AF with Live external microphone can also help View] in the C1 menu is set to y, the focus operation sounds are recorded. Adjusting the sound volume in to reduce the possibility of [Recording Sound Level] of the C1 menu, or using an recording camera operation external microphone can reduce the operation sounds to be sounds. 3 The following specifications are recorded. When [Recording Sound Level] is set to [Manual], Shooting the sound volume can be set from 0 to 20. recommended for external microphones. (A monaural • When recording a movie with an image processing function microphone cannot be used with this camera.) such as Digital Filter applied, the movie file may be saved with some frames omitted. Plug Stereo mini plug (ø3.5 mm) • If the internal temperature of the camera becomes high Format Stereo electret condenser during recording, recording may be terminated. Plug-in Power Method (operating • When a retractable lens is attached, recording stops if the Power voltage of 2.0 V or lower) lens is retracted during recording and an error message is displayed. Impedance 2.2 kΩ t Memo You can also connect the optional Cable Switch CS-310 to • You can record a movie continuously up to 4 GB or the microphone/cable release terminal on the camera. When approximately 25 minutes. When the memory card is full, the cable release is connected, sounds are recorded with the recording stops. built-in microphone. • You can change the settings for movie recording in the C You can set the device to connect EExternalxternal IInputnput DDevicesevices menus. (p.29) in [External Input Devices] of the EExternalxternal IInputnput DDevicesevices • By default, autofocus is not performed when 0 is D3 menu. Normally, you do not pressed halfway during movie recording. If a compatible lens need to change the default setting AAutomaticallyutomatically ddetectsetects iinputnput is attached to the camera, you can select y in [AF Mode] ddeviceevice aandnd sswitcheswitches bbetweenetween of [AF with Live View] in the C1 menu and continuously ([Auto Select]). ccableable rreleaseelease aandnd mmicrophoneicrophone autofocus even during movie recording. (p.62) When [AF CCancelancel OOKK Mode] is set to y, the f button operation varies as u follows depending on the setting assigned to f in [Button Caution Customization] of the C2 menu. (p.102) • Do not connect a microphone or other device outside the recommended specifications to the microphone/cable f [Button Customization] Autofocus operation when release terminal. Also, do not use an external microphone setting is pressed with a 3-meter or longer cable. Doing so may cause the Enable AF1, Pressing f performs autofocus camera to malfunction. Enable AF2 based on the [AF Mode] setting. • If an external microphone is used when recording a movie Pressing f stops autofocus with the Wi-Fi™ function enabled, radio noise may be Cancel AF and pressing f again restarts recorded depending on the compatibility with the microphone. autofocus. 53 Playing Back Movies Setting the Exposure
1 Display the movie to play 1100-000100-0001 back in single image Sensitivity display of the playback mode. 1 Press A in standby mode.
110'30"0'30" The sensitivity setting screen appears. 3 In H, K, L, or M mode, proceed to Step3. Available operations Shooting Use AB to select [ISO 11//225050 FF5.65.6 00.0.0 A Plays back/pauses a movie. 2 AUTO] or [ISO]. D Forwards a frame (when 110000 - 66400400 paused). 110000 Press and hold D Fast-forwards playback. CCancelancel OOKK C Reverses a frame (when paused). 3 Use Q or R to change the value. Press and hold C Fast-reverses playback. ISO AUTO Sets the upper limit and lower limit. B Stops playback. Selects a sensitivity value from ISO 100 to ISO R Adjusts the sound volume (21 ISO 819200. levels). Z Saves the displayed frame as a 4 Press E. JPEG file (when paused). The camera returns to standby mode. G Switches between [Standard t Memo Information Display] and [No • The adjustment steps for ISO sensitivity is 1 EV step. To Information Display]. adjust the sensitivity in accordance with the EV step setting for the exposure, set from [2 Sensitivity Steps] of the E1 t Memo menu. • The sound volume at the start of movie playback can be set • When the sensitivity is set to ISO 102400 or higher, ISO value in [Playback Sound Volume] of the B1 menu. (p.31) is displayed in the viewfinder by a combination of the letter “H” • In [Movie Edit] of the playback mode palette, a movie file can and a three-digit number (e.g., ISO 102400 = H102). be divided into multiple segments or selected frames can be deleted. (p.89)
54 Changing the Sensitivity in Standby mode Reducing Noise when Shooting with a A2 When [Sensitivity] is assigned to High ISO Sensitivity X, Y, or Z, you can change 11// 225050 F 55.6.6 the sensitivity by turning R 33200200 You can use the Noise Reduction feature when shooting with a while pressing the button. (p.102) high ISO sensitivity. Press M to reset the sensitivity to [ISO AUTO]. 9999999999 1 Select [Noise Reduction] in the A2 menu and When [Sensitivity] is assigned to press D. the function dial, you can change the sensitivity using the The [Noise Reduction] screen appears. 3 Smart Function. (p.21, p.105) Select [ISO AUTO] in Step 2 Shooting to reset the sensitivity to [ISO AUTO]. 2 Select [High-ISO NR] and press D.
3 Select the Noise Reduction NNoiseoise RReductioneduction Setting the Range of ISO AUTO A1 SSlowlow SShutterhutter SSpeedpeed NNRR level and press E. HHigh-ISOigh-ISO NNRR
You can set the range in which the IISOSO AUTOAUTO SettingSetting sensitivity is automatically adjusted IISOSO RangeRange ((Maximum)Maximum) 66400400 IISOSO RangeRange ((Minimum)Minimum) 110000 for ISO AUTO in [ISO AUTO Setting] CCancelancel OOKK of the A1 menu. IISOSO SensitivitySensitivity OOptionsptions MMinimuminimum SShutterhutter SSpeedpeed Applies Noise Reduction at optimally calculated Auto levels throughout ISO range. Low, ISO Range Applies Noise Reduction at constant chosen Sets the upper limit value for ISO AUTO. Medium, (Maximum) level throughout ISO range. High ISO Range Sets the lower limit value for ISO AUTO. Applies Noise Reduction at user-defined levels (Minimum) Custom for each ISO setting. ISO Sets whether to set the minimum shutter Does not apply Noise Reduction at any ISO Sensitivity speed automatically (AUTO) or manually Off Options (Tv). setting. When [ISO Sensitivity Options] is set to Proceed to Step 7 when other than [Custom] is selected. Minimum [AUTO]: Slow, Std., Fast Shutter Speed When [ISO Sensitivity Options] is set to [Tv]: 4 Select [Setting] and press D. 1/6000 to 30"
55 EV Compensation 5 Use AB to select a HHigh-ISOigh-ISO NRNR 1 IISOSO 110000 sensitivity and CD to IISOSO 220000 IISOSO 440000 The compensation value can be set between -5 and +5 EV (-2 select a Noise Reduction IISOSO 880000 IISOSO 11600600 and +2 EV in C mode). level. IISOSO 33200200 IISOSO 66400400 RReseteset 1 Press J, and then turn R. Available operations 3 R Shows the next/previous page.
Shooting M Resets the Noise Reduction level to the default setting.
6 Press F. The screen of Step 3 reappears.
7 Press F twice.
e and the compensation value are displayed on the status 11// 225050 F 55.6.6 screen, Live View screen, and in 11600600 the viewfinder during adjustment.
9999999999
Available operations J Starts/ends adjusting the compensation value. M Resets the adjustment value to the default setting.
t Memo • Bracketing shooting enables you to take pictures while automatically changing the exposure. (p.66) • You can assign other functions to J (Z). Also, you can assign [EV Compensation] to X or Y. (p.102) When [EV Compensation] is assigned to the function dial, you can change the setting using the Smart Function. (p.21, p.105) 56 AE Metering A1/C1 Using the Built-in Flash Choose the part of the sensor to use for measuring brightness and determining the exposure in [AE Metering] of the A1 and 1 Press C in standby mode. C1 menus. 2 Select a flash mode. FFlashlash OOnn Meters the brightness in multiple different zones of the sensor. A Multi-segment In backlit conditions, this mode 0.0EEVV 3 automatically adjusts the exposure. CCancelancel ±0EEVV OOKK Shooting Meters the brightness with an emphasis on the center of the sensor. Automatically measures the ambient Auto Flash B Center-weighted The sensitivity increases at the center A light and determines whether to use Discharge and no automatic adjustment is the flash. performed even in backlit conditions. B Auto Flash + Discharges a pre-flash for red-eye Meters the brightness only within a Red-eye reduction before an automatic flash. limited area at the center of the C Flash On Discharges a flash for each picture. sensor. Discharges a pre-flash for red-eye C Spot Flash On + Useful when the subject is small. No D reduction before the main flash for Red-eye automatic adjustment is performed each picture. even in backlit conditions. Sets to a slow shutter speed and discharges a flash for each picture. Slow-speed t Memo E Use this, for example, when shooting Sync • In [5 Link AE and AF Point] of the E1 menu, the metering a portrait with the sunset in the point and the AF point can be linked. background. • The metering method can also be set using the Smart Discharges a pre-flash for red-eye Slow Sync + F reduction before the main flash is Function. (p.21) Red-eye discharged with Slow-speed Sync. Discharges a flash immediately before closing the shutter. H Trailing Sets to a slow shutter speed. G Curtain Sync Captures moving objects as if they are leaving a light trail behind them. Manual Flash Sets the amount of flash discharge K Discharge between FULL and 1/128 power. Synchronizes with the dedicated Wireless external flash without using a sync 9 (Controller) cord. (p.120)
57 Available operations • The built-in flash is optimum for a subject at a distance from R Compensates the flash exposure. approx. 0.7 m to 5 m. Vignetting may occur when used at a Selects the amount of flash discharge (when distance closer than 0.7 m (this distance varies slightly [Manual Flash Discharge] is selected). depending on the lens being used and the sensitivity setting). • For details on the use of external flashes, refer to “Functions M Resets the compensation value to the when Using an External Flash” (p.120). default setting.
Guide Number 3 Press E. Guide Guide The camera returns to standby mode. Sensitivity Sensitivity 3 Number Number Shooting 4 Press 1. ISO 100 Approx. 6 ISO 12800 Approx. 68 The built-in flash is popped up. ISO 200 Approx. 8.5 ISO 25600 Approx. 96 ISO 400 Approx. 12 ISO 51200 Approx. 136 ISO 800 Approx. 17 ISO 102400 Approx. 192 ISO 1600 Approx. 24 ISO 204800 Approx. 272 ISO 3200 Approx. 34 ISO 409600 Approx. 384 t Memo ISO 6400 Approx. 48 ISO 819200 Approx. 544 • The flash modes that can be selected vary depending on the capture mode. Capture Mode Selectable Flash Mode R A, B, C, D G, H, J C, D, E, F, H, K, 9 I, K, L, M C, D, G, K, 9 • You cannot take pictures while the built-in flash is being charged. If you want to take pictures while charging the flash, set [8 Release While Charging] in the E2 menu. • Depending on the lens being used, the use of the built-in flash may be limited. (p.117) • When the built-in flash is used in J mode, the shutter speed automatically changes over a range from 1/180 seconds to a slow shutter speed depending on the lens being used. The shutter speed is locked at 1/180 seconds when a lens other than a DA, DA L, D FA, FA J, FA, or F lens is used. • When the built-in flash is used in I, K, or L mode, any desired shutter speed of 1/180 seconds or slower can be set.
58 Setting the Autofocus when Shooting Setting the Focus Method A1 with the Viewfinder Set the focus method using the v/ The autofocus operation when w switch. AAFF wwithith VViewfinderiewfinder shooting with the viewfinder can be AAFF MModeode AAFF AActivective AreaArea set in [AF with Viewfinder] of the A1 AAF.SF.S SSettingetting 11stst FFramerame AActionction iinn AAF.CF.C menu. AActionction iinn AAF.CF.C Cont.Cont. HHoldold AAFF StatusStatus 3 Shooting The autofocus method for shooting with the viewfinder differs AF Mode z, x, y from that for shooting with Live View. Auto (27 AF Points), Zone Select, Select, Expanded Area AF (S), TTL phase-matching AF: AF Active Area Expanded Area AF (M), Expanded Select from x, y, or z mode Area AF (L), Spot Shooting with which enables automatically switching the viewfinder between x and y. AF.S Setting Focus-priority, Release-priority Faster autofocus performance than the 1st Frame Action in Auto, Focus-priority, Release-priority contrast detection AF is possible. (p.59) AF.C Contrast detection AF: Action in AF.C Cont. Auto, Focus-priority, FPS-priority Shooting with Face Detection and Tracking are available. Live View Hold AF Status Off, Low, Medium, High (p.61) t Memo • The [AF Mode] and [AF Active Area] settings can be changed f Focusing on the Subject Using the Button by turning Q or R while pressing b. (p.60) You can use f to focus on the • When [AF Mode] or [AF Active Area] is assigned to the subject. The f button function dial, you can change the setting using the Smart operation can be set in [Button Function. (p.21, p.105) Customization] of the A5 and • In [Hold AF Status], you can set whether to immediately C2 menus. (p.102) reactivate autofocus or to maintain the focus for a certain amount of time before reactivating autofocus when the subject happens to move out of the selected focusing area after being focused.
59 AF Mode AF Active Area (AF Point)
1 Turn Q while pressing 1 Turn R while pressing b. b. 11// 225050 F 55.6.6 11600600
9999999999
3 Out of the 27 AF points, the camera Auto (27 AF Shooting J automatically selects the optimum Points) 11// 225050 F 55.6.6 focusing area. 11600600 Out of the selected 9 AF points, the I Zone Select camera automatically selects the optimum focusing area. 9999999999 Sets the focusing area to the user E Select selected point from 27 points. z Switches automatically between x Sets the focusing area to the user (Auto-select and y modes according to the selected point from 27 points. When the subject happens to move out of the mode) subject. Expanded F selected focusing area after being When 0 is pressed halfway and the Area AF (S) focused, 8 peripheral points are used x subject comes into focus, the focus is as back-up points. (Single mode) locked at that position. Available only in y mode. The AF assist light turns on as necessary. Sets the focusing area to the user The subject is kept in focus by continuous selected point from 27 points. When y adjustment while 0 is pressed the subject happens to move out of the Expanded G selected focusing area after being (Continuous halfway. Area AF (M) mode) The shutter can be released even if the focused, 24 peripheral points are used as back-up points. subject is not in focus. Available only in y mode. t Memo Sets the focusing area to the user •In R mode, the autofocus mode is fixed to z. selected point from 27 points. When the subject happens to move out of the Expanded H selected focusing area after being Area AF (L) focused, 26 peripheral points are used as back-up points. Available only in y mode. Sets the focusing area to the center of D Spot the 27 points. Proceed to Step 2 when other than [Auto (27 AF Points)] or 60 [Spot] is selected. Setting the Autofocus when 2 Select the desired AF A1/C1 point. 11// 225050 F 55.6.6 Shooting with Live View 11600600 The autofocus operation when shooting with Live View can be set in [AF with Live View] of the A1 and C1 menus. 9999999999 AAFF wwithith LLiveive VViewiew AAFF wwithith LLiveive VViewiew AAFF AActivective AreaArea AAFF MModeode Available operations FFocusocus PPeakingeaking AAFF AActivective AreaArea AAF.SF.S SSettingetting FFocusocus PPeakingeaking ABCD Changes the AF point. 3
E Returns the AF point to the Shooting center. Press and hold E Switches the function of the AF Mode x, y arrow keys (ABCD) to AF Face Detection, Tracking, Multiple AF point change mode or direct AF Active Area key operation mode. Points, Select, Spot Focus Peaking Highlight Edge, Extract Edge, Off t Memo AF.S Setting Focus-priority, Release-priority •In R mode, [AF Active Area] is fixed to [Auto (27 AF Points)]. t Memo • The [AF Mode] and [AF Active Area] settings can be checked • The [AF Mode] and [AF Active Area] settings can be changed also in the viewfinder. Q is displayed in the viewfinder when by turning Q or R while pressing b. (p.62) the AF point can be changed. (p.19) • When [AF Mode], [AF Active Area], or [Focus Peaking] is • You can switch the function of the arrow keys to AF point assigned to the function dial, you can change the setting change mode with X, Y, or Z, instead of pressing and using the Smart Function. (p.21, p.105) holding E. (p.102) When [Change AF Area] is assigned to • When [Focus Peaking] is set to [Highlight Edge] or [Extract X, Y, or Z, the operation by pressing and holding E is Edge], the outline and contrast of the subject in focus is disabled. emphasized, and this makes it easier to check the focus. This • You can select the button operation when changing the AF function works in both v and w modes. The outline of the point in [18 4-way Controller Settings] of the E3 menu. subject is not emphasized while autofocus is performed or a Switches the function of the arrow keys alternately movie is recorded. Histogram Display and Highlight Alert Type1 between AF point change mode and direct key become inactive while the outline of the subject is operation mode. emphasized. Prioritizes the AF point change mode in standby Type2 mode.
61 AF Mode AF Active Area
When a compatible lens is attached and the camera is in C 1 Turn R while pressing FFaceace DDetectionetection mode, the menu item [AF Mode] becomes available and the b. autofocus mode can be changed.
1 Turn Q while pressing b. 11//22000000 FF2.82.8 11600600 99999999 3 Detects and tracks faces of people. Shooting Face e The main face detection frame for AF Detection and AE is displayed in yellow. Tracks the subject in focus. MMultipleultiple AAFF PPointsoints f Tracking The shutter can be released even if the subject is not in focus. Sets the focusing area to the desired area. The sensor is divided into 35 areas (7 999'99"9'99" Multiple AF 0 horizontal by 5 vertical), and you can Points t Memo select a wider or narrower focusing • Update the camera and lens firmware to the latest version in area by using 1, 9, 15, 25, or 35 of order to make the menu item [AF Mode] available. those 35 available areas. For more information on the firmware update, visit h Select Sets the focusing area by the pixel. http://www.ricoh-imaging.co.jp/english/support/ Sets the focusing area to a limited area i Spot download_digital.html at the center. Select from [Multiple AF Points], [Select], or [Spot] in C mode. Proceed to Step 2 when [Multiple AF Points] or [Select] is selected.
2 Press and hold E.
62 3 Select the AF area. AF Fine Adjustment E4 Use the frame that appears on You can precisely fine-tune your lenses with the camera’s the monitor to change the autofocus system. position and size of the AF area.
OOKK 1 Select [23 AF Fine Adjustment] in the E4 menu and press D. Available operations The [23 AF Fine Adjustment] screen appears. ABCD Changes the position of the AF area. 3 Select [Apply All] or [Apply One] and press E. R Increases/reduces the size of the AF 2 Shooting area (when [Multiple AF Points] is Applies the same adjustment value to all Apply All selected). lenses. M Returns the AF area to the center. Saves an adjustment value for the lens Apply One being used. (Up to 20 values) 4 Press E. The AF area is set. 3 Select [Setting] and adjust 2233 AAFF FFineine AAdjustmentdjustment the value. 3 AApplypply OneOne t Memo SSettingetting ±0 •In R mode, [AF Active Area] is fixed to [Face Detection]. • You can switch the function of the arrow keys to AF area RReseteset IIndividualndividual SSettingsettings change mode with X, Y, or Z, instead of pressing and CCancelancel ±0 SSaveave holding E. (p.102) When [Change AF Area] is assigned to X, Y, or Z, the operation by pressing and holding E is Available operations disabled. D/R to the right Adjusts the focus to a closer position. C/R to the left Adjusts the focus to a farther position. M Resets the adjustment value to the default setting.
4 Press E. The adjustment value is saved.
5 Press F twice. The camera returns to standby mode.
63 t Memo Setting the Drive Mode • The Drive Mode setting is saved even after the power is turned off. If [Drive Mode] is set to Y (Off) in [Memory] of the A5 menu, the setting returns to [Single Frame Shooting] D 1 Press in standby mode. when the power is turned off. (p.110) The Drive Mode screen appears. SSingleingle FrameFrame SShootinghooting • When a drive mode that employs the self-timer is selected, [Shake Reduction] of the A4 menu is automatically set to [Off]. If you do not want to turn off the Shake Reduction function, set in [19 Auto SR Off] of the E3 menu.
3 CCancelancel OOKK Shooting 2 Select a drive mode. If Light Enters through the Viewfinder When a drive mode that employs the self-timer is selected, Single Frame Shooting Normal capture mode exposure may be affected by the light entering through the (L) viewfinder. In such a case, use the AE Lock function. (p.51) Continuously takes pictures Continuous Shooting while 0 is kept pressed. (Z, a, b) (p.65) Releases the shutter about 12 Self-timer seconds or 2 seconds after (O, P, Y) 0 is pressed. (p.65) Bracketing Takes consecutive pictures at (T, 1) different exposure levels. (p.66) Depth of Field Takes consecutive pictures at Bracketing different depth of fields (x, y) (aperture values). (p.67) Motion Bracketing Takes consecutive pictures at (u, v) different shutter speeds. (p.68) Mirror Lock-up Takes pictures with the mirror Shooting raised. (p.69) (c) Creates a composite image by Multi-exposure taking multiple pictures and (V, z, W) merging them into a single image. (p.69) Interval Shooting Automatically takes pictures at (q, U, V, w) set intervals. (p.70)
u Caution • There are restrictions on some drive modes when used in 64 combination with some other functions. (p.115) Continuous Shooting Self-timer
1 Select Z on the Drive CContinuousontinuous SShootinghooting ((H)H) 1 Select O on the Drive SSelf-timerelf-timer ((1212 ssec.)ec.) Mode screen and press B. Mode screen and press B.
CCancelancel OOKK CCancelancel OOKK 3 Use CD to select Z, a, or b, and press E. Use CD to select O, P, or Y. 2 2 Shooting Z Continuous Shooting (at high speed) Self-timer (shutter release after about 12 O a Continuous Shooting (at medium speed) seconds) b Continuous Shooting (at low speed) P Self-timer (shutter release after about 2 seconds) Y Self-timer + Continuous Shooting The camera returns to standby mode. Proceed to Step 6 when O or P is selected. t Memo • You can change the shooting speed for Continuous Shooting 3 Press G. using the Smart Function. (p.21) • When [AF Mode] in [AF with Viewfinder] of the A1 menu is 4 Set [Shooting Speed] and SSelf-timerelf-timer + CContinuousontinuous set to x, the focus position is locked in the first frame. SShootinghooting SSpeedpeed (p.60) [Number of Shots]. NNumberumber ooff ShotsShots 3ttimesimes
CCancelancel OOKK
5 Press E. The screen of Step 1 reappears.
6 Press E. The camera returns to standby mode.
7 Press 0 halfway, and then fully. The shutter is released after about 12 seconds or 2 seconds.
65 Bracketing 7 Press E. The camera returns to standby mode. You can take multiple images at different exposure levels. 8 Shoot. Select T on the Drive BBracketingracketing 1 After pictures are taken, the camera returns to standby B Mode screen and press . mode. t Memo 3 x3 ±±0.3EV0.3EV • The bracket value can be set in increments of 1/3 EV steps or CCancelancel RReseteset OOKK 1/2 EV steps according to the [1 EV Steps] setting of the E1 Shooting menu. 2 Use CD to select T or 1. • The following settings for Bracketing can be set in the E2 T Bracketing menu. 1 Bracketing + Self-timer Changes the shooting order of 9 Bracketing Order Proceed to Step 6 when T is selected. pictures. Takes all pictures with one 10 One-Push Bracketing 3 Press G. release of the shutter. • When [Bracket Value] is assigned to the function dial, you can 4 Select a self-timer mode. BBracketingracketing change the bracket value using the Smart Function. (p.21, SSelf-timerelf-timer p.105)
CCancelancel OOKK
5 Press E. The screen of Step 1 reappears.
6 Set the number of shots and bracket value.
Available operations Q Sets the number of shots. R Changes the bracket value. JR Adjusts the exposure compensation value. M Resets the adjustment value to the default setting. 66 Depth of Field Bracketing 6 Use R to set the bracketing order and bracket value. You can take three consecutive images at different aperture values without changing the exposure. Available operations This function is only available in J mode. R to the right Takes pictures using smaller apertures (larger f-numbers) 1 Select x on the Drive DDepthepth ooff FFieldield BBracketingracketing than the current setting. Mode screen and press B. R to the left Takes pictures using larger apertures (smaller f-numbers) 3 Shooting +11.0.0 than the current setting. CCancelancel RReseteset OOKK M Resets the adjustment value to the default setting. 2 Use CD to select x or y. x Bracketing 7 Press E. y Bracketing + Self-timer The camera returns to standby mode. Proceed to Step 6 when x is selected. 8 Shoot. Takes three pictures with one release of the shutter. Press G. 3 The camera returns to standby mode.
4 Select a self-timer mode. DDepthepth ooff FFieldield BBracketingracketing t Memo SSelf-timerelf-timer • The bracket value can be set in increments of 1/3 EV steps or 1/2 EV steps according to the [1 EV Steps] setting of the E1 menu.
CCancelancel OOKK u Caution • When using a lens with an 9 position, if the aperture ring is 5 Press E. set to a position other than 9, [Depth of Field Bracketing] The screen of Step 1 reappears. cannot be selected.
67 Motion Bracketing 6 Use R to set the bracketing order and bracket value. You can take three consecutive images at different shutter speeds without changing the exposure. Available operations This function is only available in I mode. R to the right Takes pictures using faster shutter speeds than the current 1 Select u on the Drive MMotionotion BBracketingracketing setting. Mode screen and press B. R to the left Takes pictures using slower 3 shutter speeds than the current Shooting +11.0.0 setting. CCancelancel RReseteset OOKK M Resets the adjustment value to the default setting. 2 Use CD to select u or v. u Bracketing 7 Press E. v Bracketing + Self-timer The camera returns to standby mode. Proceed to Step 6 when u is selected. 8 Shoot. Takes three pictures with one release of the shutter. Press G. 3 The camera returns to standby mode.
4 Select a self-timer mode. MMotionotion BBracketingracketing t Memo SSelf-timerelf-timer • The bracket value can be set in increments of 1/3 EV steps or 1/2 EV steps according to the [1 EV Steps] setting of the E1 menu.
CCancelancel OOKK
5 Press E. The screen of Step 1 reappears.
68 Mirror Lock-up Shooting Multi-exposure
1 Select c on the Drive MMirrorirror LLock-upock-up SShootinghooting 1 Select V on the Drive MMulti-exposureulti-exposure Mode screen and press Mode screen and press B.
E. CCompositeomposite MModeode AAverageverage The camera returns to standby NNumberumber ooff ShotsShots 00002002ttimesimes mode. PParameterarameter Adj.Adj. CCancelancel OOKK CCancelancel OOKK 3 Press 0 halfway, and then fully. Use CD to select V, z, or W. 2 2 Shooting The mirror pops up and the AE Lock function is activated. V Multi-exposure 3 Press 0 fully again. z Multi-exposure + Continuous Shooting The picture is taken and then the mirror returns to its W Multi-exposure + Self-timer original position. Proceed to Step 6 if you do not need to change the shooting t Memo conditions. • The mirror automatically returns to its original position if 1 G minute elapses after the mirror pops up. 3 Press . u Caution 4 Set the shooting MMulti-exposureulti-exposure • While this function is used, [Shake Reduction] of the A4 CCompositeomposite MModeode AAverageverage conditions. NNumberumber ooff ShotsShots 00002002ttimesimes menu is fixed to [Off]. SShootinghooting SSpeedpeed
CCancelancel OOKK
Select from [Average], [Additive], or Composite Mode [Bright]. Number of Shots Select from 2 to 2000 times. Shooting Speed/ Specify the operation mode for the Self-timer selected shooting mode.
5 Press E. The screen of Step 1 reappears.
6 Press E. The camera returns to standby mode.
69 7 Shoot. Interval Shooting The Instant Review image is displayed. 1 Select q on the Drive IIntervalnterval SShootinghooting Available operations during Instant Review Mode screen and press B.
L Discards pictures taken up to that point and IIntervalnterval 0000 : 000´02˝0´02˝ takes pictures again from the first picture. NNumberumber ooff ShotsShots 00002002ttimesimes SStarttart IntervalInterval PParameterarameter Adj.Adj. F Saves pictures taken up to that point and CCancelancel OOKK 3 displays the A menu. Use CD to select q, U, V, or w. Shooting After the specified number of shots are taken, the camera 2 returns to standby mode. Interval Shooting q t Memo Takes pictures at set intervals and saves them. • A composite image is created as follows in each Composite Interval Composite Mode. U Takes pictures at set intervals and merges them into a single image. Creates a composite image with the average Average exposure. Interval Movie Record Takes still pictures at set intervals and saves Creates a composite image with the cumulatively V Additive them as a single movie file (Motion JPEG, file added exposure. extension: .AVI). Creates a composite image replacing only the Star Stream Bright portions that are brighter compared with the first Takes still pictures at set intervals and merges image. w them into a single movie file (Motion JPEG, file extension: .AVI) using Interval Composite. Proceed to Step 6 if you do not need to change the shooting conditions.
3 Press G.
4 Set the shooting IIntervalnterval SShootinghooting IIntervalnterval 0000 : 000´02˝0´02˝ conditions. NNumberumber ooff ShotsShots 00002002ttimesimes SStarttart IntervalInterval SStarttart TTimeime ----:----
CCancelancel OOKK
70 t Memo Select from z, u, or t (only for Recorded Pixels q U V and w). •For and , a new folder is created and the captured images are saved there. Interval Select from 2 seconds to 24 hours. • The shortest time that can be set for [Interval] is 5 seconds Select from the minimum time or 1 Standby Interval when [Digital Filter], [Clarity], or [Skin Tone] is set, and 10 second to 24 hours. seconds when [HDR Capture] is set. Select from 2 to 2000 times (from 8 to • The second and later exposures start at the intervals set in Number of Shots 2000 times for V and w). [Interval]. If the exposure time is longer than the time set in Select when and how to take the first [Interval], some of the pictures that are supposed to be taken Start Interval picture from [Now], [Self-timer], or [Set at the set intervals are not actually taken. For example, if the 3
Time]. time set in [Interval] is 2 seconds and the exposure time is 3 Shooting seconds, the first exposure does not end at the time the Set the shooting start time when [Start Start Time second exposure is supposed to start (2 seconds after the Interval] is set to [Set Time]. start of shooting), and so the second picture is not taken. As Select from [Average], [Additive], or Composite Mode a result, Interval Shooting ends before the specified number [Bright] (only for U). of shots are taken. In such cases, you can set [Standby Select Z to save images in the Interval] in [11 Interval Shooting Options] of the E2 menu so Save Process middle of processing (only for U). that pictures are taken at the set intervals after each exposure Select the fade-out effect level of light ends. The screen displayed in Step 4 varies depending on the Fade-out trails (only for w). [11 Interval Shooting Options] setting. • For q, U, V, and w, the focus position used when the 5 Press E. first picture is taken is locked. In order to perform autofocus for The screen of Step 1 reappears. each exposure, set [12 AF in Interval Shooting] to [Adjusts focus for each shot] in the E2 menu and use the viewfinder for Press E. shooting. 6 • For U and w, set the camera on a fixed support such as a The camera returns to standby mode. tripod during shooting. • For w, [Shake Reduction] of the A4 menu is fixed to [Off]. 7 Press 0. When [Start Interval] is set to [Now], the first picture is taken. When set to [Set Time], shooting starts at the set time. To cancel shooting, turn the camera off. After the specified number of shots are taken, the camera returns to standby mode.
71 Setting the White Balance 3 Press G. AAutouto WWhitehite BBalancealance The fine-tuning screen appears.
1 Press B in standby mode. GG33 AA22 The White Balance setting screen appears. Press X to use Digital Preview when shooting with the CCancelancel ±0 OOKK viewfinder. Available operations AB Adjust: Green-Magenta 2 Select the desired white AAutouto WWhitehite BBalancealance 3 balance setting. CD Adjust: Blue-Amber Shooting For k, o, and p, turn R to M Resets the adjustment value to the default select the type of white balance. setting. WWBB± CCancelancel CCheckheck OOKK 4 Press E. g Auto White Balance The screen of Step 2 reappears. u Multi Auto White Balance 5 Press E. h Daylight The camera returns to standby mode. i Shade u Caution j Cloudy •In R mode, the white balance is fixed to [Auto White q Fluorescent - Daylight Color Balance]. • The Digital Preview operation in Step 1 is disabled when the r Fluorescent - Daylight White k drive mode is set to [Mirror Lock-up Shooting], [Multi- s Fluorescent - Cool White exposure], or [Interval Shooting]. t Fluorescent - Warm White t Memo l Tungsten • When [Multi Auto White Balance] is set, even if various light n Color Temperature Enhancement sources are present at the shooting location, the camera o Manual White Balance 1 to 3 automatically adjusts the white balance according to the light p Color Temperature 1 to 3 source of each area. ([Multi Auto White Balance] is not available in C mode.) Available operations when shooting with the • The following settings for the white balance can be set in the viewfinder E2-3 menus. X Uses Digital Preview to preview the 13 WB Adjustable Range Fixed, Auto Adjustment background image with the selected setting Strong Correction, Subtle 14 AWB in Tungsten Light applied. Correction Z Saves the preview image (only when the Auto White Balance, Multi image can be saved). 15 WB When Using Flash Auto White Balance, Unchanged Proceed to Step 5 if you do not need to fine-tune the white 16 Color Temperature Steps Kelvin, Mired 72 balance. Adjusting the White Balance Manually Adjusting the White Balance with Color Temperature You can measure the white balance at a selected location. You can specify the white balance with the color temperature. 1 Select o in Step 2 of “Setting the White Balance” (p.72). 1 Select p in Step 2 of “Setting the White Balance” (p.72). 2 Use R to select 1 to 3. MManualanual WWhitehite BBalancealance 1 to 3 are the locations where you 2 Use R to select 1 to 3. 3 can store three different manual Shooting white balance settings. 3 Press G. WWBB± AAdjustdjust CCancelancel CCheckheck OOKK 4 Adjust the color CColorolor TTemperatureemperature 3 Under the light you wish to measure the white temperature. balance of, select a white area as the subject, Set the color temperature value within the range from 2,500K to ±0 ±0 and press 0 fully. 10,000K. The captured image is displayed. CCancelancel ±0 OOKK
4 Use ABCD to specify Available operations the measuring area. Q Changes the color temperature in Press M to return the measuring increments of 100 Kelvin. area to the center. R Changes the color temperature in CCancelancel OOKK increments of 1,000 Kelvin. ABCD Fine-tunes the color temperature. 5 Press E. The White Balance setting screen reappears. 5 Press E. [The operation could not be completed correctly] appears The White Balance setting screen reappears. when measuring is unsuccessful. Press E to remeasure the white balance. t Memo • Select [Mired] in [16 Color Temperature Steps] of the E3 t Memo menu to set the color temperature in mired units. The color • You can copy the white balance settings of a captured image temperature can be changed in 20 mired units with Q, and and save them as o1 to o3 in [Save as Manual WB] of the 100 mired units with R. However, figures are converted to playback mode palette. (p.81) and displayed in Kelvin.
73 Controlling the Image Finishing Tone 4 Set the parameters. SSaturationaturation
When you want to take pictures with a slightly different style, you can set the desired picture style before shooting. Try out the various settings, and find your best picture style. CCancelancel RReseteset OOKK
Custom Image A1/C1 Available operations 3 AB Selects a parameter. A C Shooting 1 Select [Custom Image] in the 1 or 1 menu CD Adjusts the value. and press D. Q Switches between [Contrast], [Highlight The Custom Image setting screen appears. Adjustment], and [Shadow Adjustment]. 2 Select an image finishing BBrightright R Switches between [Sharpness], [Fine tone. Sharpness], and [Extra Sharpness]. (Not available in C mode.)
±±00 ±±00 ±±00 ++11 ++11 M Resets the adjustment value to the default PParameterarameter Adj.Adj. CCancelancel CCheckheck OOKK setting.
Auto Select Muted 5 Press F. Bright Flat The screen of Step 2 reappears. Natural Bleach Bypass The adjustment values for parameters are displayed. Portrait Reversal Film Landscape Monochrome 6 Press F twice. Vibrant Cross Processing The camera returns to standby mode. Radiant u Caution Available operations when shooting with the •In R mode, [Custom Image] is fixed to [Auto Select]. viewfinder • The Digital Preview operation in Step 2 is disabled when the X Uses Digital Preview to preview the drive mode is set to [Mirror Lock-up Shooting], [Multi- background image with the selected setting exposure], or [Interval Shooting]. applied. • When [Custom Image] is assigned to the function dial, you can change the image finishing tone using the Smart Z Saves the preview image (only when the Function. (p.21, p.105) By default, [Custom Image] is image can be saved). assigned to C1. Proceed to Step 6 when [Auto Select] is selected or if you do not need to change the parameters. 3 Press G. 74 The parameter setting screen appears. Saving the Cross Processing Settings of a Digital Filter A3/C2 Captured Image 1 Select [Digital Filter] in the A3 or C2 menu and When [Cross Processing] is set to [Random], the outcome press D. varies each time a picture is taken. If a cross processed image The Digital Filter setting screen appears. that you like is taken, you can save the Cross Processing settings used in the image so that you can repeatedly use the same settings. 2 Select a filter. EExtractxtract CColorolor Select [No Filter] to not shoot with a digital filter. 3 1 Press B in single image display of playback mode. Shooting PParameterarameter Adj.Adj. The playback mode palette appears. CCancelancel CCheckheck OOKK
2 Select [Save Cross Processing] and press E. Extract Color Shading The camera searches for cross processed images starting Replace Color Invert Color from the most recent image taken. Toy Camera Unicolor Bold [No cross processed image] appears if there are no cross Retro Bold Monochrome processed images. High Contrast
3 Use Q to select a cross 1100-000100-0001 Available operations when shooting with the processed image. SSavesaves tthishis iimage'smage's CCrossross viewfinder PProcessingrocessing ssettingsettings X Uses Digital Preview to preview the SSaveave aass FFavoriteavorite 1 SSaveave aass FFavoriteavorite 2 background image with the selected setting SSaveave aass FFavoriteavorite 3 applied. CCancelancel OOKK Z Saves the preview image (only when the 4 Select the “Favorite” number 1, 2, or 3 to save image can be saved). E the settings, and press . Proceed to Step 6 if you do not need to change the The settings of the selected image are saved as your parameters. “Favorite” settings. t Memo 3 Press G. • The saved Cross Processing settings can be loaded by The parameter setting screen appears. selecting [Cross Processing] in Step 2 of “Custom Image” (p.74), and selecting one of the Favorite settings 1 to 3 for the parameter.
75 4 Set the parameters. EExtractedxtracted CColorolor 1 Correcting Images
Brightness Adjustment CCancelancel CCheckheck OOKK
Available operations Highlight Correction A2/C2 3 AB Selects a parameter. Shadow Correction
Shooting CD Adjusts the value. Expands the dynamic range and DD-Range-Range SSettingsettings enables a wider range of tones to be HHighlightighlight CCorrectionorrection Press E. SShadowhadow CorrectionCorrection 5 recorded by the CMOS sensor and The screen of Step 2 reappears. reduces the occurrence of overexposed/underexposed areas. E 6 Press . Set the correction functions from [D- Range Settings] of the A2 or C2 7 Press F. menu. The camera returns to standby mode. u Caution u Caution • When the sensitivity is set to less than ISO 200, [Highlight • This function cannot be used in combination with some other Correction] cannot be set to [On]. functions. (p.115) • The Digital Preview operation in Step 2 is disabled when the t Memo drive mode is set to [Mirror Lock-up Shooting], [Multi- • [Highlight Correction] in C mode can be set to [Auto] or [Off]. exposure], or [Interval Shooting]. • Depending on the filter used, it may take longer to save images. t Memo • Still pictures can also be processed with digital filters in playback mode. (p.87)
76 HDR Capture A3 Lens Correction A4
Takes three consecutive images at three different exposure The following features can be set in LLensens CorrectionCorrection levels to create a single composite image with them. [Lens Correction] of the A4 menu. DDistortionistortion CCorrectionorrection PPeripheraleripheral Illumin.Illumin. CCorr.orr. LLat-Chromatic-Abat-Chromatic-Ab AAdjdj DDiffractioniffraction CCorrectionorrection 1 Select [HDR Capture] in the A3 menu and press D. The [HDR Capture] screen appears.
2 Select a capture type and 9999999999 Distortion Reduces distortions occurring due to lens 3
HHDRDR CaptureCapture Shooting press E. BBracketracket ValueValue Correction properties. AAutouto AlignAlign Peripheral Reduces peripheral light fall-off occurring Illumin. Corr. due to lens properties.
CCancelancel OOKK Lat-Chromatic-Ab Reduces lateral chromatic aberrations Adj occurring due to lens properties. 3 Set the range in which to change the exposure in Diffraction Corrects blur caused by diffraction when [Bracket Value]. Correction using a small aperture. Select from [±1EV], [±2EV], or [±3EV]. t Memo 4 Set whether to use Auto Align or not. • Corrections can only be made when a compatible lens is attached. (p.116) The features are disabled when an Z Uses Auto Align. accessory such as a rear converter is attached between the Y Does not use Auto Align. camera and the lens. • When [File Format] is set to [RAW] or [RAW+] in [Image F 5 Press twice. Capture Settings] of the A2 menu, correction information is The camera returns to standby mode. saved as a RAW file parameter and you can select whether t Memo to apply the correction to the images when developing them. • The capture type can also be changed by the Smart Function. When developing RAW images, the correction feature [Color (p.21) Fringe Correction] is also available. (RAW Development, u Caution p.90) •In M or C mode, HDR Capture is disabled. • This function cannot be used in combination with some other functions. (p.115) • When the drive mode is set to [Interval Shooting] or [Interval Movie Record], [Auto Align] is fixed to Y (Off). • When [Auto Align] is set to Y (Off), [Shake Reduction] of the A4 menu is fixed to [Off]. • For HDR Capture, multiple images are combined together to create a single image, so it may take time to save the image. 77 Quality Level and Texture Adjustment Shooting High-Definition Images A3
Pixel Shift Resolution is the feature that enables outputting a high- definition image of stationary objects by merging multiple images Adjusting the Texture A3 shifted pixel by pixel using the Shake Reduction mechanism.
The texture and surface details of an 3 CClaritylarity 1 Select [Pixel Shift Resolution] in the A3 menu image can be adjusted in the range of SSkinkin TToneone -4 to +4. DDigitaligital FFilterilter and press D. HHDRDR CaptureCapture Set in [Clarity] of the A3 menu. PPixelixel SShifthift RResolutionesolution The [Pixel Shift Resolution] screen appears. 3 AASTROTRACERSTROTRACER Shooting EExitxit 2 Select [On] or [Off] in [Pixel 9999999999 PPixelixel SShifthift RResolutionesolution Shift Resolution] and MMotionotion CCorrectionorrection Enhancing the Skin Tone A3 press E. CCreatesreates a hhighigh ddefinitionefinition iimagemage bbyy ttakingaking aandnd The skin tone of portraits can be 3 ccombiningombining mmultipleultiple iimagesmages enhanced. CClaritylarity CCancelancel OOKK SSkinkin TToneone Set in [Skin Tone] of the A3 menu. DDigitaligital FFilterilter HHDRDR CaptureCapture PPixelixel SShifthift RResolutionesolution 3 Select [On] or [Off] in [Motion Correction] and AASTROTRACERSTROTRACER press E. CCancelancel OOKK When [Motion Correction] is set to [On], mosaic-pattern noise is corrected when a moving object is detected, and a Determines the skin tone of the subject by the Face composite image is created. Type1 Detection function, and creates a natural-looking skin tone. (Available only when a face is detected.) 4 Press F twice. Softens the entire image, and makes skin The camera returns to standby mode. Type2 irregularities less noticeable. 5 Press 0. Multiple images are taken using the electronic shutter with one release of the shutter. The captured images are displayed in turn, and then they are merged into a single image. u Caution •In M or C mode, Pixel Shift Resolution is disabled. • This function cannot be used in combination with some other functions. (p.115) • [AA Filter Simulator] and [Shake Reduction] of the A4 menu are fixed to [Off]. • [Shutter Mode Selection] of the A2 menu is fixed to [Electronic Shutter]. 78 t Memo A • When taking pictures with Pixel Shift Resolution, use a tripod Reducing Color Moiré 4 and mount the camera on it securely. The use of Pixel Shift By shaking the Shake Reduction unit, a moiré reduction effect Resolution in combination with Self-timer or Mirror Lock-up simulating that of a low-pass filter can be achieved. Shooting is recommended. 1 Select [AA Filter Simulator] in the A4 menu and press D.
2 Select a capture type and 4 3 press E. AAAA FilterFilter SSimulatorimulator
SShakehake RReductioneduction Shooting HHorizonorizon CCorrectionorrection CCompositionomposition AAdjust.djust. LLensens CorrectionCorrection IInputnput FocalFocal LLengthength
CCancelancel OOKK
Takes pictures while balancing the Type1 resolution and moiré reduction. Type2 Prioritizes the moiré reduction. Bracketing Takes two consecutive images in order of (2 images) [Off] and [Type2]. Bracketing Takes three consecutive images in order of (3 images) [Off], [Type1], and [Type2].
u Caution • This function cannot be used in combination with some other functions. (p.115) •In M mode, [Bracketing] cannot be selected. • [Bracketing] is available only when the drive mode is set to [Single Frame Shooting] or [Self-timer] (12 seconds, 2 seconds). • When [HDR Capture] in the A3 menu is set, [AA Filter Simulator] is fixed to [Off]. • When the shutter speed is faster than 1/1000 seconds, the full effect of this function cannot be achieved. t Memo • When [AA Filter Simulator] is assigned to the function dial, you can change the capture type using the Smart Function. (p.21, p.105) By default, [AA Filter Simulator] is assigned to C2. 79 t Memo Composition Adjustment A4 • When [Grid Display] is set to [On] in [Live View] of the A5 menu, grid lines are displayed on the screen of Step 4. By using the Shake Reduction mechanism, the composition of • The adjusted composition is saved even if Live View is ended the image can be adjusted. Use this function when you want to or the camera is turned off. To reset the saved adjustment adjust the composition, such as when using a tripod while value when the camera is turned off, set [Composition shooting with Live View. Adjust.] to Y (Off) in [Memory] of the A5 menu. (p.110) 1 Select [On] in [Composition Adjust.] of the A4 3 menu. Shooting 2 Press F. The camera returns to standby mode. 3 Set the A/K/C switch to K. The Live View image is displayed and the message [Adjust the composition of the image] appears.
4 Adjust the composition. 0 0 The amount of adjustment (the 0 AAdjustdjust thethe compositioncomposition number of steps) is displayed at ooff tthehe iimagemage the top right of the screen.
CCancelancel OOKK
Available operations ABCD Moves the composition of the image (up to 16 steps). R Corrects the tilt of the composition (up to 8 steps. Not available when the amount of adjustment steps in vertical and horizontal directions is 8 or more). M Resets the adjustment values to the default settings.
5 Press E. The camera returns to standby mode in Live View. u Caution • You cannot use this function when the ASTROTRACER function is used. 80 Item Function Page Playback Mode Palette Items Divides a movie or deletes l Movie Edit *4 p.89 unwanted segments. Playback functions can be set from IImagemage RRotationotation *1 Not available when a TIFF image or movie is displayed. the playback mode palette as well as *2 Not available when a RAW image or TIFF image is displayed. the B1 menu (p.31). *3 Available only if a RAW image has been saved. Press B in single image display RRotatesotates ccapturedaptured iimages.mages. *4 Available only when a movie is displayed. UUsefulseful fforor iimagemage pplaybacklayback oonn (Standard Information Display or No TTVV aandnd ootherther ddisplayisplay ddevicesevices Information Display) of the playback EExitxit OOKK mode to display the playback mode palette.
Item Function Page 4 Playback Image Changes the rotation a p.84 Rotation *1 information of an image. Processes images with b Digital Filter *1 p.87 digital filters. Color Moiré Reduces color moiré in c p.87 Correction *1 *2 images. Changes the number of d Resize *1 *2 p.86 recorded pixels of an image. Crops out only the desired e Cropping *1 p.86 area of an image. Protects images from being f Protect p.110 accidentally erased. Plays back images one after h Slideshow p.84 another. Saves the white balance Save as Manual i settings of a captured image p.73 WB *1 as Manual White Balance. Saves the settings used for an image captured in Cross Save Cross j Processing mode of Custom p.75 Processing Image as your “Favorite” settings. Develops RAW images into RAW k JPEG or TIFF images and p.90 Development *3 saves them as new files. 81 Changing the Playback Method Deleting Selected Images 1 Press L in Step 1 of “Displaying Multiple Images” (p.82). Displaying Multiple Images
Select the images to 0001/50001/500 1100-050500-0505 You can display 6, 12, 20, 35, or 80 thumbnail images at the 2 same time. delete.
1 Turn R to the left in 1100-050500-0505 playback mode. 4 The multi-image display screen
Playback appears. Available operations ABCD Moves the selection frame. E Confirms/cancels the selection of the Available operations image to delete. ABCD Moves the selection frame. Z Selects the range of images to delete. Q Shows the next/previous page. R Shows the selected image in single
G Shows the 1100-050500-0505 image display. display style Use Q to select a different image. selection 1122 ThumbnailThumbnail DDisplayisplay In the upper left area of the monitor, the number of selected screen. images is displayed.
Press L. L Deletes the selected images. 3 The delete confirmation screen appears. Press E. 2 Select [Delete] and press E. The selected image appears in single image display. 4 t Memo • You can select up to 500 images at a time. • Protected images cannot be selected. • You can delete the images selected individually along with the images selected by specifying the range to delete. • Use the same steps to select multiple images for the following functions. • RAW Development (p.90) • Protect (p.110) 82 Displaying Images by Folder Displaying Images by Shooting Date
Images are grouped and displayed by shooting date. 1 Turn R to the left in Step 1100_070700_0707 1 of “Displaying Multiple 110000 110101 110202 110303 Press G in Step 1 of “Displaying Multiple Images” (p.82). 1 110404 110505 110606 110707 Images” (p.82). The folder display screen The display style selection screen appears. appears. 112323
2 Select [Calendar Filmstrip 22017.2017.2 1100-050500-0505 Available operations TTHUHU 2 Display]. SSATAT 1111 MMONON 2200 ABCD Moves the selection frame. FFRIRI 2244 22017.3017.3 4 L Deletes the selected folder. SSUNUN 5
TTHUHU 9 Playback TTUEUE 2211 22/5/5 2 Press E. Shooting Thumbnail The images in the selected folder are displayed. date
Available operations Deleting a Folder AB Selects a shooting date. 1 Select the folder to delete in Step 1 of CD Selects an image taken on the “Displaying Images by Folder” (p.83), and press selected shooting date. L. R to the right Shows the selected image in The delete confirmation screen appears. single image display. L Deletes the selected image. 2 Select [Delete] and press E. The selected folder and all the images in it are deleted. 3 Press E. When protected images are in the folder, select [Delete all] The selected image appears in single image display. or [Leave all].
83 Playing Back Images Continuously Displaying Rotated Images
1 Select [Slideshow] in the Image rotation information is saved when you take pictures with the camera held vertically. When [Auto Image Rotation] of [LCD playback mode palette. SStarttart Display] in the B1 menu is set to Z (On), the image is A slideshow starts. automatically rotated based on the rotation information during playback (default setting). The rotation information of an image can be changed by following the procedure below. Available operations E Pauses/resumes playback. 1 Display the image to edit in single image display. 4 C Displays the previous image. Playback D Displays the next image. 2 Select [Image Rotation] in the playback mode B Stops playback. palette. R Adjusts the sound volume of the movie. The selected image is rotated in 90° increments and the four thumbnail images are displayed. After all images are played back, the camera returns to single image display mode. 3 Use ABCD to select the t Memo desired rotation direction and press E. • You can change the [Display 1100-000100-0001 The image rotation information is Duration], [Screen Effect], [Repeat SStarttart Playback], and [Auto Movie saved, and the camera returns to DDisplayisplay DDurationuration 33sec.sec. CCancelancel OOKK Playback] settings for a slideshow SScreencreen EEffectffect single image display mode. RRepeatepeat PPlaybacklayback in [Slideshow] of the B1 menu. A AAutouto MMovieovie PPlaybacklayback u Caution OOKK slideshow can also be started from • When [20 Save Rotation Info] is set to [Off] in the E3 menu, the Slideshow setting screen. image rotation information is not saved. Y E When [Auto Movie Playback] is set to (Off), press • You cannot change image rotation information in the during a slideshow to play back a movie. following cases. • Protected images • Images without a rotation information tag • When [Auto Image Rotation] of [LCD Display] in the B1 menu is set to Y (Off) • Movie files cannot be rotated.
84 u Caution Connecting the Camera to an AV Device • While the camera is connected to an AV device, nothing is displayed on the camera monitor. Also, you cannot adjust the Connect to an AV device, such as a TV, equipped with an sound volume on the camera. Adjust the volume on the AV HDMI® terminal to display Live View images while shooting or device. to play back images in playback mode. • Some HDMI® adapters are not compatible with this camera. The USB terminal (micro B) of the camera supports SlimPort®. Proper operation has been confirmed with the following Make sure to have a commercially available HDMI® adapter HDMI® adapter: and compatible HDMI® cable. SP6001 (Analogix Semiconductor, Inc.) • Do not supply power to an HDMI® adapter from an external 1 Turn the AV device and camera off. power source. This may cause the camera to malfunction. ® ® • Images may not be output due to incompatibility with the used 2 Connect the HDMI adapter and HDMI cable. HDMI® cable. Use an HDMI® cable which does not 4
incorporate electronic circuits. Playback Open the terminal cover of the camera, and 3 •MHL®-to-HDMI® adapters cannot be used. connect the HDMI® adapter to the USB/video output terminal. t Memo • Check the operating manual of the AV device and select a suitable input terminal for connecting the camera. • By default, the maximum resolution supported by both the AV device and camera is automatically selected. If it fails to play back images properly, change the setting in [Video Out Resolution] of the D3 menu.
4 Connect the other end of the HDMI® cable to the input terminal on the AV device.
5 Turn the AV device and camera on. The camera turns on in video output mode, and the camera information is displayed on the screen of the connected AV device.
85 Editing and Processing Images Cropping Out Part of the Image Crops out only the desired area of the selected image and saves it as a new file. Changing the Image Size 1 Display the image to edit in single image u Caution display. • Only JPEG images captured with this camera can be resized or cropped. 2 Select [Cropping] in the playback mode palette. • Images already resized or cropped to the minimum file size The cropping frame to specify the size and position of the cannot be processed. 4 area to crop appears on the screen.
Playback Changing the Number of Recorded Pixels 3 Specify the size and 33456x2304456x2304 position of the area to crop Changes the number of recorded pixels of the selected image, by using the cropping and saves it as a new file. frame. 1 Display the image to edit in single image display. Available operations 2 Select [Resize] in the playback mode palette. R Changes the size of the cropping frame. The screen to select the number of recorded pixels ABCD Moves the cropping frame. appears. G Changes the Aspect Ratio or Image Rotation setting. Use CD to select the 3 M Rotates the cropping frame (only when number of recorded pixels possible). and press E. You can select an image size 4 Press E. smaller than that of the original CCancelancel OOKK The save confirmation screen appears. image. The save confirmation screen appears. 5 Select [Save] and press E. 4 Select [Save] and press E.
86 Correcting Color Moiré Processing Images with Digital Filters
Reduces color moiré in images. 1 Display the image to edit in single image display. 1 Display the image to edit in single image display. 2 Select [Digital Filter] in the playback mode palette. Select [Color Moiré Correction] in the playback 2 The screen to select a filter appears. mode palette. If the image cannot be edited, [This image cannot be 3 Select a filter. 1100-000100-0001 processed] appears. BBasease PParameterarameter AdjAdj Use Q to select a different 4 image. 3 Use CD to select the Playback correction level and press PParameterarameter Adj.Adj. E. SStoptop OOKK The save confirmation screen appears. Base Parameter Adj Sketch CCancelancel OOKK Extract Color Water Color Replace Color Pastel E 4 Select [Save] and press . Toy Camera Posterization u Caution Retro Miniature • The Color Moiré Correction function can only be used for High Contrast Soft JPEG images captured with this camera. Shading Starburst Invert Color Fish-eye Unicolor Bold Slim Bold Monochrome Monochrome Tone Expansion
Proceed to Step 7 if you do not need to change the parameters.
4 Press G. The parameter setting screen appears.
87 Recreating Filter Effects 5 Set the parameters. BBrightnessrightness Retrieves the filter effects of the selected image and applies the same filter effects to other images.
CCancelancel OOKK 1 Display a filter-processed image in single image display. Available operations 2 Select [Digital Filter] in the playback mode AB Selects a parameter. palette. CD Adjusts the value. 3 Select [Recreating filter 4 effects] and press E. Press E. AApplyingpplying thethe digitaldigital ffilterilter
Playback 6 The screen of Step 3 reappears. The filter effects used for the RRecreatingecreating ffilterilter eeffectsffects selected image appear. SSearchingearching fforor ooriginalriginal iimagemage
7 Press E. OOKK The save confirmation screen appears. 4 To check the parameter 1100-000100-0001 details, press G. RReapplieseapplies followingfollowing ddigitaligital ffilterilter 8 Select [Apply additional filter(s)] or [Save] and eeffectsffects ffromrom ppreviousrevious iimagemage press E. Press G again to return to the 1 5 9---- 1133---- 1177---- 2 6 1100---- 1144---- 1188---- Select [Apply additional filter(s)] when you want to apply previous screen. 3 7 1111---- 1155---- 1199---- additional filters to the same image. The screen of Step 3 4 8---- 1122---- 1166---- 2200---- DDetailsetails OOKK reappears. Press E. u Caution 5 The image selection screen appears. • Only JPEG and RAW images captured with this camera can be edited with the digital filters. 6 Use Q to select an 1100-000100-0001 • RAW images captured using HDR Capture or Pixel Shift image for applying the PPerformserforms ddigitaligital ffilterilter pprocessingrocessing ttoo tthishis iimagemage Resolution cannot be processed with Digital Filter. same filter effects, and t Memo press E. You can only select an image • Up to 20 filters, including the digital filter used during shooting OOKK (p.75), can be applied to the same image. that has not been processed with a filter. The save confirmation screen appears. 7 Select [Save] and press E. t Memo • If [Searching for original image] is selected in Step 3, the original image prior to digital filter application can be 88 retrieved. Editing Movies 5 Use CD to move the selection frame and press 1 Display the movie to edit in single image E 000'05"0 ' 05" . 10'00"10 ' 00" display. The segments to delete are specified. (Multiple segments SSelectelect ssegmentsegments fforor ddeletioneletion 2 Select [Movie Edit] in the playback mode palette. can be deleted at once.) The movie editing screen appears. Press E again to cancel the selection.
3 Select the point where you 6 Press F. want to divide the movie. The screen of Step 3 reappears. The frame at the dividing point is 000'00"0 ' 00" 10'00"10 ' 00" 4 displayed at the top of the Press E.
7 Playback screen. The save confirmation screen appears. Up to four points can be selected SStoptop OOKK to divide the original movie into 8 Select [Save] and press E. five segments. t Memo Available operations • Select dividing points in chronological order from the A Plays back/pauses a movie. beginning of the movie. When canceling the selected dividing points, cancel each of them in reverse order (from the end of D Forwards a frame (when the movie to the beginning). In an order other than specified, paused). you can neither select dividing points nor cancel the Press and hold D Fast-forwards playback. selections of the dividing points. C Reverses a frame (when paused). Press and hold C Fast-reverses playback. R Adjusts the sound volume. G Confirms/cancels the selected dividing point.
Proceed to Step 7 if you do not want to delete any segment.
4 Press L. The screen to select the segments to delete is displayed.
89 Developing RAW Images 6 Select the setting item to 1100-000100-0001 WWhitehite BBalancealance change. You can develop RAW images into JPEG or TIFF images, and save them as new files. 1 Select [RAW Development] in the playback CCheckheck OOKK mode palette. The screen for selecting the processing type appears. White Balance Distortion Correction 2 Select the desired option and press E. Custom Image Peripheral Illumin. Corr. Sensitivity Lat-Chromatic-Ab Adj Select single Develops an image. image Clarity Diffraction Correction 4 Skin Tone Color Fringe Correction
Playback Select multiple Develops up to 500 images with the Digital Filter File Format images same settings. HDR Capture/ Aspect Ratio Develops up to 500 images in the Select a folder Pixel Shift Resolution JPEG Recorded Pixels selected folder with the same settings. Shadow Correction JPEG Quality When [Select single image] is selected, proceed to Step 6. High-ISO NR Color Space The image/folder selection screen appears. Available operations 3 Select image(s) or a folder. Proceed to Step 5 if a folder is selected. Q Selects a different image (when in single image display). y How to select image(s) (p.82). ABCD Selects a parameter. G 4 Press . R Changes the value. The screen for selecting the parameter setting method appears. G Reviews the image. E Makes detailed settings. 5 Select the parameter 0001/50001/500 1100-000100-0001 setting method and press Use ABCD to select [JPEGu] or [TIFFu]. E DDevelopevelop iimagesmages aass sshothot 7 . DDevelopevelop iimagesmages wwithith Turn R to change the file format. mmodifiedodified ssettingsettings
OOKK 8 Press E. The save confirmation screen appears. Allows you to change only File Develop images as Format, Aspect Ratio, JPEG Select [Save] and press E. shot Recorded Pixels, JPEG Quality, 9 When [Select single image] is selected, select [Continue] or and Color Space. [Exit], and press E. Develop images with Allows you to change all setting modified settings items. 90 u Caution • Only RAW images captured with this camera can be developed. • For RAW images captured when the drive mode is set to [Multi-exposure] or [Interval Composite], the images are developed with the Lens Correction settings used during shooting. The Lens Correction settings cannot be changed when developing RAW images. t Memo • When [Select multiple images] or [Select a folder] is selected in Step 2, a folder with a new number is created, and the JPEG or TIFF images are stored in it. 4
• For [HDR Capture] and [Pixel Shift Resolution], the Playback parameters of either one of the two functions used during shooting can be changed. • With the provided software “Digital Camera Utility 5”, you can develop RAW images on a computer.
91 Using the Camera with a Copying an Image on the Memory Card Computer 1 Set [USB Connection] to [MSC] in the D3 menu.
Connect the camera to a computer using a USB cable. Turn the camera off. Make sure to have a commercially available USB cable 2 equipped with a micro B terminal. 3 Open the terminal cover of the camera, and connect Setting the Connection Mode D3 the USB cable to the USB/ video output terminal. Set the connection mode in [USB Connection] of the D3 menu according to the operation to be performed with a computer. Allows you to copy the data on the memory 5 MSC card to a computer by making the computer 4 Connect the USB cable to the USB port of the Sharing (default setting) recognize the camera as a removable disk. computer. (p.92) Allows you to perform tethered shooting by 5 Turn the camera on. PTP operating the camera with a computer. The camera is recognized as a removable disk. (p.93) t Memo 6 Save the captured images to the computer. • Refer to “Operating Environment for USB Connection and Provided Software” (p.132) for system requirements to 7 Disconnect the camera from the computer. connect the camera to a computer with a commercially u Caution available USB cable and to use the software. • The camera cannot be operated while it is connected to a • If you intend to use the camera continuously for a long period, computer. To operate the camera, terminate the USB the use of the optional AC adapter kit is recommended. (p.40) connection on the computer first, then turn off the camera and remove the USB cable. • If the “KP” dialog appears on the computer screen in Step 5, select [Open folder to view files] and click the OK button.
92 Operating the Camera with a Computer Using the Camera with a You can perform tethered shooting with the camera connected Communication Device to a computer using the optional “IMAGE Transmitter 2” software. Captured images can be directly saved to the This camera has a built-in Wi-Fi™ function. By directly connecting to computer. a communication device such as a smartphone and tablet via wireless LAN, the camera can be operated from the communication device and 1 Set [USB Connection] to [PTP] in the D3 menu. images can be shared with others via social networks or e-mail. Enabling the Wi-Fi™ Function 2 Turn the camera off. The Wi-Fi™ function is disabled when the camera is turned on. 3 Connect the camera to a computer using a USB Enable the function using one of the following methods. cable. • Setting from the menus (p.94) • Using the X button (p.94) y Connecting the camera to a computer (p.92) 5 When the Wi-Fi™ function is enabled, a beep sounds and the 7 Sharing 4 Turn the camera on. (white) icon indicating the wireless LAN status is displayed on the status 5 Start “IMAGE Transmitter 2” on the computer. screen and Live View screen. When “IMAGE Transmitter 2” is started and the computer 8 (gray) is displayed, a connection 9999999999 recognizes the camera. with the communication device is not established correctly. t Memo t Memo • For details on “IMAGE Transmitter 2”, refer to the “User Guide • Even after the Wi-Fi™ function is enabled, it returns to an [Operation]” available at the following site. inactive state when the camera is turned off and on again. http://www.ricoh-imaging.co.jp/english/support/ • Auto Power Off is not available while a Wi-Fi™ connection is download_manual.html established or images are being transferred. If Auto Power • During tethered shooting, the shutter release always has Off is activated while a connection is not established, the priority regardless of the [AF.S Setting] setting of [AF with Wi-Fi™ function is disabled. The function is enabled when the camera recovers from Auto Power Off. Live View] in the A1 menu. (p.61) • The Wi-Fi™ function is disabled during the USB connection or while outputting image data. u Caution • Do not attempt to use the Wi-Fi™ function in a location where the use of wireless LAN devices is restricted or prohibited, such as on airplanes. • When using the Wi-Fi™ function, observe local laws and regulations governing radio communication. • If a memory card with a built-in wireless LAN function (such as an Eye-Fi card or a Flucard) is used, radio wave interference may occur. When this occurs, disable the Wi-Fi™ function of the camera. 93 Setting from the Menus D3 Operating the Camera with a Communication Device 1 Select [Wi-Fi] in the D3 menu and press D. The [Wi-Fi] screen appears. The following functions can be used by connecting the camera to a communication device via Wi-Fi™ and using the dedicated 2 Set [Action Mode] to [On]. WWi-Fii-Fi application “Image Sync”. AActionction MModeode Select [Off] to disable the Wi-Fi™ CCommunicationommunication IInfonfo Displays the Live View image of the RReseteset SSettingsettings function. camera on the communication device, and Remote Capture enables controlling exposure settings and shooting by operating the communication CCancelancel OOKK device. 3 Press F twice. Displays the images saved on the memory card inserted in the camera on the Image View 5 t Memo communication device, and imports the
Sharing • In Step 2, select [Communication Info] to check the SSID, images to the communication device. Password, and MAC Address of the wireless LAN. Or, select Image Sync supports iOS and Android™, and can be [Reset Settings] to reset the settings to their default values. downloaded from the App Store or Google Play™. For the supported operating system and other details, refer to the Using the X Button download site.
If you use the Wi-Fi™ function frequently, assign the function to t Memo the X button so that you can easily turn the function on and off • The Image Sync screenshots used in this manual are the with a simple button operation. ones under development and may differ from the actual display. The screen layout and elements may be also 1 Assign [Wi-Fi] to X. changed due to causes such as the version upgrade of the application or operating system. y Setting the X button operation (p.102) • For details on how to operate the communication device, refer to the operating manual of the device. 2 Press and hold X in standby mode. A beep sounds and [Wi-Fi enabled] appears on the monitor. Press and hold X again to disable the Wi-Fi™ function.
94 Connecting the Camera and a Communication Device 5 Enter the password, and Connect the camera and a communication device via Wi-Fi™, tap [Connect]. and start Image Sync installed on the communication device. A Wi-Fi™ connection is established between the camera and the communication device. When an Android Device is Used The list of images appears on the Image Sync screen. 1 Set the wireless LAN (Wi-Fi™) function to ON on the communication device. 2 Start Image Sync on the communication device. The camera selection screen appears on the communication device. 3 Tap [PENTAX KP]. t Memo 5 The [Choose a Network] screen • Refer to [Communication Info] in [Wi-Fi] of the D3 menu for Sharing appears on the communication the default password. (p.94) device.
4 Tap [PENTAX_xxxxxx] in the [Network List]. The [Enter Password] screen appears.
95 When an iOS Device is Used Screens of Image Sync 1 Set the wireless LAN (Wi-Fi™) function to ON on Flick left or right on the screen to switch operation modes. the communication device. Application image list Camera image list 2 Tap [PENTAX_xxxxxx] in the list of detected Wi-Fi™ networks.
3 Enter the password, and tap [Join]. A Wi-Fi™ connection is established between the camera and the communication device. 5 Sharing
A mode
4 Start Image Sync on the communication device. Image Sync is started, and the list of images appears.
t Memo • You can change the operation mode also by tapping the buttons displayed at the bottom of the screen.
96 Shooting with a Communication Device 1 Set up the basic settings on the camera. The Live View image of the camera and buttons for shooting are displayed on the shooting screen of Image Sync. 2 Check the Live View image on the shooting screen of 1 8 Image Sync. 2 9 3 10 4
11 5 12 5 6 13 Sharing 7 14 3 Change the settings using Image Sync as necessary. 1 Settings (p.100) 2 Capture mode 3 Live View 4 AF frame 5 White Balance, Shutter Speed, Aperture value, EV Compensation, Sensitivity 6 Live View on/off 7 Operation modes 8 Communication icon 9 Battery level 10 Thumbnail of the last captured image (When tapped, the camera image list is displayed.) 11 File Format, Image storage capacity 12 Drive Mode 13 Green button 14 Shutter release button
97 Tap an item and select a value from the list. Viewing Images
You can view the images saved either in the camera or in the communication device. 1 4 2 5
4 When the focus method is set to v, tap the 5 position where you want to perform autofocus in
Sharing the Live View image. Autofocus is performed at the tapped position. 3 1 Multiple image selection button 5 Tap the shutter release button. 2 Album selector button (available for the application image The captured image is displayed as a thumbnail. list only) u Caution 3 Operation modes 4 Settings (p.100) • The capture mode (A (still picture) mode or C (movie) 5 Communication icon mode) can be changed by using the capture mode selector switch on the camera. Tap the thumbnail image to view it in • Shooting with Image Sync is not available when the drive single image display and check its mode is set to [Continuous Shooting (H)], [Interval Shooting], shooting information. [Interval Composite], [Interval Movie Record], or [Star Stream]. • The captured images are saved to the memory card inserted in the camera. Shooting cannot be performed if there is not enough available space on the memory card. t Memo • Shooting can also be performed by tapping the Live View image. Set in [Touch AF] on the [Settings] screen. (p.100) • While shooting with Image Sync, the autofocus system operates in x mode regardless of the autofocus mode Touch operations setting, and the shutter release has priority regardless of the Flick left/right Shows the previous/next image. [AF.S Setting] setting of [AF with Live View] in the A1 menu. Pinch out/in Magnifies/reduces the image. 98 (p.61) Selecting the Image Storage Location Selecting Multiple Images
When viewing images in application image list display, you can 1 Tap 5. select the image storage location (album) from “Application” or “Gallery” (or “Camera Roll”).
1 Tap 4.
5 2 Tap the images to select. Sharing Blue check marks appear.
2 Select the album. The images in the selected album are displayed.
3 Touch and hold one of the selected images.
99 4 Select the desired action. Changing the Settings 1 Tap 6.
t Memo 5 • When you touch and hold the desired image on the image list Sharing display screen or the shooting information display screen, the The [Settings] screen appears. same screen as Step 4 appears and the desired action can be selected.
The following settings are available. Sets whether to perform only autofocus Touch AF or perform shooting after autofocus when touching the Live View image. Image Capture Changes the settings for File Format Settings and JPEG Recorded Pixels. Composition Turns the composition adjustment Adjustment function on or off. General Changes the communication settings Settings and the display language. 100 Device Information 2 Tap [General Settings] to change the communication settings and the display language.
3 Tap the setting item to change.
Language 5 Sharing
Communication Settings The password and wireless channel can be changed.
4 Change the settings and tap 1.
101 Camera Settings 3 Press D and use AB to select the function to assign to each part. Setting Function Page Customizing the Button/E-dial Sets the exposure A5/C2 EV compensation value Functions Compen- p.56 (assigned to Z by sation default). Setting the Button Operation Sensitivity Sets the ISO sensitivity. p.55 Displays the preview You can set the functions for when X, Y, Z, or f is image to check the pressed. Preview composition, exposure, p.104 In C mode, you can set only the function for when f is and focus before pressed. shooting. Locks the exposure Select [Button Customization] in the A5 or C2 AE Lock p.51 1 settings. 6 menu and press D. Switches the function of Setting The [Button Customization] screen appears. the arrow keys to AF Change AF p.61, area change mode or Select the desired item and BButtonutton CCustomizationustomization 1 Area p.63 2 Fx1 Button direct key operation press D. FFx1x1 BButtonutton FFx2x2 BButtonutton Fx2 Button mode. The screen to set the function for FFx3x3 BButtonutton AAF/AE-LF/AE-L BButtonutton Fx3 Button Temporarily changes the selected item is displayed. One Push the file format (assigned p.103 File Format to X by default). Turns the Electronic Level display for the Electronic viewfinder and Live p.20 Level View on or off (assigned to Y by default). Turns the Wi-Fi™ Wi-Fi *1 p.94 function on or off. Night Turns the Night Vision Vision LCD LCD Display feature on p.122 Display *1 or off. Operation Enables or disables the Control Operation Control Lock p.51 Lock feature. 102 Setting Function Page Setting the One Push File Format Autofocus is performed Enable AF1 when f is pressed. You can temporarily change the file format by pressing the button during shooting. By default, [One Push File Format] is Autofocus is performed assigned to X. when f is pressed. Enable AF2 Half press of 0 is p.59 Set [One Push File Format] to [Fx1 Button], [Fx2 AF/AE-L disabled. 1 Button Button], or [Fx3 Button] in Step 3 of “Setting the While f is pressed, Button Operation” (p.102). Cancel AF half press of 0 is disabled. Select Z or Y for [Cancel after 1 shot]. Locks the exposure 2 AE Lock p.51 settings. The recording format returns to the [File Format] *1 Available only when [Fx1 Button] is selected. Z setting of [Image Capture Settings] in the A2 menu after a picture is taken. Press E. 4 The setting is retained until any of the following 5 Press F. operations is performed: The screen of Step 2 reappears. Y • When X, Y, or Z is pressed again 6 Repeat Steps 2 to 5. • When 3, F, or G is pressed, or when the Setting mode dial or main switch is turned 6 Press F twice. t Memo 3 Select the file format when FFx1x1 BButtonutton OOnene PPushush FFileile FFormatormat • You can check the functions assigned to the buttons while the the button is pressed. CCancelancel aafterfter 1 sshothot Guide Display feature is active (p.27). The left side is the [File Format] When the following functions are OOnene PushPush FFileile FFormatormat setting and the right side is the assigned to X, Y, or Z, the changed file format when the function name and current setting button is pressed. CCancelancel OOKK are displayed after the button is pressed. • One Push File Format 9999999999 4 Press F three times. • Electronic Level The camera returns to standby mode. •Wi-Fi • Night Vision LCD Display t Memo • You can assign the same function to X, Y, and Z. • When the button is pressed and held, a beep sounds and the • When [Change AF Area], [One Push File Format], [Electronic One Push File Format is enabled. Level], [Wi-Fi], or [Night Vision LCD Display] is assigned to X, Y, or Z, pressing the button makes a beep sound. To disable the beep sound, change the sound setting for each function in [Sound Effects] of the D1 menu. (p.32) • When [Operation Control Lock] is assigned to X, Y, or Z and is enabled, the restrictions on the use of buttons and dials are canceled if another function is assigned to the button. 103 t Memo Setting the Preview • Optical Preview is always used in the following situations You can display the preview image by pressing the button regardless of the setting. before shooting. • When the drive mode is set to [Mirror Lock-up Shooting], [Multi-exposure], or [Interval Shooting] 1 Set [Preview] to [Fx1 Button], [Fx2 Button], or •In C mode [Fx3 Button] in Step 3 of “Setting the Button u Caution Operation” (p.102). • The effects of some functions cannot be checked during Digital Preview or are not applied to the saved preview image. 2 Select a preview method in FFx1x1 BButtonutton PPreviewreview [Preview Selection] and PPreviewreview SSelectionelection press E. FForor checkingchecking ddepthepth ooff ffieldield wwithith vviewfinderiewfinder
CCancelancel OOKK
Activates the Optical Preview function U 6 to check the depth of field with the Optical Preview Setting viewfinder. Activates the Digital Preview function to check the composition, exposure, and f focus on the monitor. Digital Preview Zoom Review, Save Preview Image, Histogram Display, and Highlight Alert are available. Proceed to Step 4 when U is selected.
3 Press B and select Y or FFx1x1 BButtonutton PPreviewreview Z for each display item. PPreviewreview SSelectionelection
ZZoomoom RRevieweview SSaveave PPreviewreview IImagemage HHistogramistogram DDisplayisplay HHighlightighlight AlertAlert
4 Press F three times. The camera returns to standby mode.
104 Setting the Smart Function Setting Function Page Changes the Focus Peaking Focus Peaking p.61 Some useful functions can be assigned to C1, C2, and C3 of the setting. function dial, and the setting values can be changed with the Changes the Program Line Program Line p.50 setting dial. (p.21) setting. Switches between the Shutter Mode 1 Select [Button Customization] in the A5 menu mechanical shutter and the p.52 Selection and press D. electronic shutter. The [Button Customization] screen appears. Recorded Changes the number of recorded p.48 Pixels pixels of an image or movie. Turn R and select BButtonutton CCustomizationustomization 2 2 Changes the capture type of AA [Function Dial], and press FFunctionunction DialDial AA Filter EE-Dial-Dial PProgrammingrogramming Filter Simulator (assigned to C2 p.79 Simulator D. by default). The [Function Dial] screen Changes the type of the grid appears. p.46, Grid Display lines displayed during Live View p.47 or playback. 6 3 Select [C1], [C2], or [C3], FFunctionunction DialDial Changes the type of information LCD Display p.16, Setting and press D. CCustomustom IImagemage displayed during shooting or AAAA FFilterilter SSimulatorimulator Options p.17 OOutdoorutdoor VViewiew SettingSetting playback. Magnifies the image when Image p.46, shooting with Live View or during Magnification p.47 playback. Changes the brightness of the 4 Use AB to select the function to save. Outdoor View monitor (assigned to C3 by p.108 Setting Setting Function Page default). Sensitivity Changes the ISO sensitivity. p.54 EV Changes the exposure 5 Press E. p.56 Compensation compensation value. The [Function Dial] screen reappears. Repeat Steps 3 to 5. Changes the bracket value for Bracket Value p.66 Bracketing. 6 Press F three times. Changes the image finishing Custom Image tone for Custom Image p.74 (assigned to C1 by default). p.60, AF Mode Changes the autofocus mode. p.62 Changes the focusing area p.60, AF Active Area selection mode. p.62 105 t Memo Setting the E-dial Operation • The assigned functions can be CCustomustom IImagemage checked on the status screen or For each exposure mode, you can set the functions for when Live View screen when the function Q and R are turned and M is pressed. dial or setting dial is turned. The function can be set for exposure modes other than M mode. 9999999999 1 Select [Button Customization] in the A5 or C2 menu and press D. The [Button Customization] screen appears.
2 Turn R and select [E-Dial Programming], and press D. The [E-Dial Programming] screen appears.
3 Select an exposure mode EE-Dial-Dial PProgrammingrogramming 1 6 and press D.
Setting The screen for the selected exposure mode appears. SSetsets thethe operationoperation ooff ee-dial-dial fforor eeachach eexposurexposure mmodeode
4 Press D and use AB to EExposurexposure MModeode select the combination of functions for when Q and R are turned and M
is pressed. CCancelancel OOKK
I Change Shutter Speed J Change Aperture Value ISO Change Sensitivity e EV Compensation XG Return to G Mode GSHIFT Program Shift GLINE Program Line -- Not available
E 106 5 Press . Setting the Monitor and Indicator 6 Press F. D2 The [E-Dial Programming] screen reappears. Lamps Repeat Steps 3 to 6.
7 Press F three times. Adjusting the Brightness, Saturation, and Color of the Monitor t Memo • If you select [Rotation Direction] in Step 3, you can reverse You can set the brightness, saturation, and color adjustment of Q R the effect obtained by turning or . the monitor. • You can check the functions assigned to Q, R, and M while the Guide Display (p.45) is shown. 1 Select [LCD Display Settings] in the D2 menu and press D. The [LCD Display Settings] screen appears.
2 Adjust the brightness, LLCDCD DDisplayisplay SSettingsettings BBrightnessrightness LLevelevel saturation, and color. 6 Setting
CCancelancel ±0 OOKK
Available operations AB Selects a parameter. CD Adjusts the value. M Resets the adjustment value to the default setting.
3 Press E. The D2 menu reappears. u Caution • When [Outdoor View Setting] is set, [LCD Display Settings] cannot be changed.
107 Adjusting the Brightness of the Monitor for Saving Frequently Used Settings A5 Outdoor Shooting Four factory preset settings—HDR LANDSCAPE, MACRO,
If the monitor display is difficult to see 2 ASTROPHOTO, and MANUAL LENS—are assigned to O to LLCDCD DDisplayisplay SSettingsettings 4 when you take pictures outdoors or in OOutdoorutdoor VViewiew SettingSetting of the mode dial. other situations, adjust the brightness NNightight VisionVision LCDLCD DisplayDisplay You can save frequently used camera settings to O to 5 by IIndicatorndicator LLampsamps of the monitor in [Outdoor View replacing the preset settings with them. Setting] of the D2 menu. The following settings can be saved. EExitxit Exposure Mode Drive Mode t Memo Sensitivity White Balance • When [Outdoor View Setting] is assigned to the function dial, EV Compensation A menu and E menu you can change the setting using the Smart Function. (p.21, Flash Mode settings (with exceptions) p.105) By default, [Outdoor View Setting] is assigned to C3.
Setting the Lighting-up of the Indicator Lamps Saving the Settings 6 You can set whether to light up each IIndicatorndicator LLampsamps 1 Set the exposure mode and all the necessary Setting indicator lamp in [Indicator Lamps] of SSelf-timerelf-timer GGPSPS LLEDED IndicatorsIndicators settings to save. the D2 menu. 2 Select [Save USER Mode] in the A5 menu and press D. The [Save USER Mode] screen appears.
3 Select [Save Settings] and SSaveave UUSERSER MModeode SSaveave SSettingsettings press D. RRenameename USERUSER MModeode CCheckheck SSavedaved SettingsSettings The [Save Settings] screen RReseteset UUSERSER MModeode appears.
4 Select a USER mode from [USER1] to [USER5], and press D. 5 Select [Save] and press E. 6 Press F. The screen of Step 3 reappears. u Caution • [Save USER Mode] cannot be selected when the mode dial is set to R or in C mode. 108 t Memo • The settings saved as the USER mode can be displayed on Using the Saved USER Mode the monitor when you select [Check Saved Settings] in Step 3. • To reset the saved settings to their default values, select 1 Set the mode dial to O to 5. [Reset USER Mode] in Step 3. The USER mode name is AABCDEFGHIJKLMNOPQRBCDEFGHIJKLMNOPQR displayed as the guide display. 11// 225050 F 55.6.6 11600600 Editing a Setting Name Use AB to check the saved settings. You can change the name of the USER mode in which you saved settings. 9999999999 1 Select [Rename USER Mode] in Step 3 of “Saving the Settings” (p.108) and press D. 2 Change the settings as necessary. The [Rename USER Mode] screen appears. The exposure mode can be EExposurexposure MModeode changed in [Exposure Mode] of EExposurexposure MModeode PProgramrogram LLineine 2 Select a USER mode from [USER1] to [USER5], the A1 menu. and press D. The text-entry screen appears. CCancelancel OOKK 3 Change the text. Text selection cursor 6
Up to 18 single-byte Setting RRenameename USERUSER MModeode t Memo alphanumeric characters and A B C D E F GH I J K LMNO P Q R • The settings changed in Step 2 are not saved as the USER symbols can be entered. S T U VWX Y Z 0 1 2 3 4 5 6 7 8 9 mode settings. When the camera is turned off, the camera FFinishinish A B C returns to the saved USER settings. To change the saved
DDeleteelete OOnene CCharacterharacter settings, save the USER mode settings again. CCancelancel EEnternter Text input cursor Available operations ABCD Moves the text selection cursor. R Moves the text input cursor. Z Switches between upper and lower case letters. E Enters a character selected with the text selection cursor at the position of the text input cursor. L Deletes a character at the position of the text input cursor. 4 After entering the text, move the text selection cursor to [Finish], and press E. The [Rename USER Mode] screen reappears. 109 Selecting Settings to Save in the A5 File Management Settings Camera
The setting values for most functions of this camera are saved even if the camera is turned off. For the following function Protecting Images from Deletion settings, you can select whether to save the settings (Z) or to return the settings to their default values (Y) when the camera You can protect images from being accidentally deleted. is turned off. u Caution Set in [Memory] of the A5 menu. • Even protected images are deleted if the inserted memory Sensitivity Digital Filter card is formatted. EV Compensation HDR Capture Flash Mode Pixel Shift Resolution Flash Exposure Compensation Composition Adjust. 1 Select [Protect] in the playback mode palette. Drive Mode Shooting Info Display The screen for selecting the processing type appears. White Balance Playback Info Display Custom Image Outdoor View Setting 2 Select [Select image(s)] or 6 Clarity Night Vision LCD Display [Select a folder] and press Setting Skin Tone Operation Control Lock E. SSelectelect iimage(s)mage(s) SSelectelect a ffolderolder t Memo • When [Reset] of the D5 menu is performed, all Memory OOKK settings return to the default values. 3 Select the image(s) or folder to protect. Proceed to Step 5 if [Select a folder] is selected. y How to select image(s) (p.82)
4 Press G. The confirmation screen appears.
5 Select [Protect] and press E. t Memo • To protect all images stored on the memory card, select [Protect All Images] of the B1 menu.
110 Specifying the Folder/File Settings D4 The four digits of the month and day of the shooting date are assigned after the folder number. The month and day appear according to the Create New Folder Date [Date Format] setting in [Date Adjustment] of the D1 menu. When [Create New Folder] is selected in the D4 menu, a folder Example) 101_0125: for images taken on is created with a new number when the next image is saved. January 25th u Caution A freely defined string of five characters is • You cannot successively create multiple folders. assigned after the folder number. (Default Optional t Memo setting: PENTX) Example) 101PENTX • A new folder is automatically created in the following cases. • When the drive mode is set to [Interval Shooting] (p.70) Proceed to Step 6 if you select [Date] or do not need to • When [Select multiple images] or [Select a folder] is change the character string. selected for [RAW Development] of the playback mode Press B, and then press D. palette (p.90) 3 The text-entry screen appears. 6
Folder Name 4 Change the text. Text selection cursor Setting Enter five single-byte FFolderolder NNameame When images are captured with this camera, a folder is alphanumeric characters. ABCDEFGH I JKLM NOPQRSTUVWXYZ automatically created and the captured images are stored in it. 0123456789_ Each folder name consists of a sequential number from 100 to FFinishinish P E N T X 999 and a string of 5 characters. RReseteset The character string in the folder name can be changed. CCancelancel EEnternter Text input cursor 1 Select [Folder Name] in the D4 menu and press D. Available operations The [Folder Name] screen appears. ABCD Moves the text selection cursor. R Moves the text input cursor. 2 Press D and select [Date] FFolderolder NNameame FFolderolder NNameame DDateate E Enters a character selected with the text or [Optional]. OOptionalptional __MMDDMMDD selection cursor at the position of the text input cursor. M Resets the entered text to “PENTX”.
5 After entering the text, move the text selection cursor to [Finish], and press E. 6 Press F twice. 111 t Memo • A folder with a new number is created when the folder name File Name is changed. One of the following string of characters is used as the file name • A maximum of 500 images can be stored in a single folder. prefix depending on the [Color Space] setting of [Image Capture When the number of captured images exceeds 500, a new Settings] in the A2 menu. folder is created with the number following the number of the folder currently being used. When the drive mode is set to Color Space File Name [Bracketing], images are stored in the same folder until sRGB IMGP.JPG shooting is completed. AdobeRGB _IMG.JPG u Caution The first four characters can be changed to a character string of • The maximum folder number is 999. After the folder number your choice. reaches 999, you cannot capture new images if you attempt to change the folder name or create a new folder, or when the 1 Select [File Name] in the D4 menu and press D. file name number reaches 9999. The [File Name] screen appears.
2 Select A or C, and press FFileile NNameame D. I MG P .JPG 6 _ I MG .JPG
Setting The text-entry screen appears. I MG P .MOV
3 Change the text. Up to four single-byte alphanumeric characters can be entered as an alternative for the first part of the file name, while the asterisks stand for figures that increase automatically shot by shot. y How to enter text (p.111)
4 Press F twice. t Memo • When [Color Space] is set to [AdobeRGB], the file name prefix is “_” and first three characters of the entered character string become the file name. • For movies, regardless of the [Color Space] setting, the file name is “IMGP.MOV” or the one with the entered string of characters.
112 File No. Setting the Copyright Information D4
Each file name consists of a string of FFileile NNo.o. You can set the photographer and copyright information four characters and a sequential SSequentialequential NNumberingumbering RReseteset FFileile NNumberumber embedded in the Exif data. number from 0001 to 9999. You can set whether to continue the UUsesses ssequentialequential ffileile nnumberumber 1 Select [Copyright Information] in the D4 menu iinn newnew folderfolder bbasedased oonn llastast sequential numbering for the file nnumberumber iinn ppreviousrevious ffolderolder and press D. name even if a new folder is created The [Copyright Information] screen appears. in [Sequential Numbering] of [File No.] in the D4 menu. 2 Use CD to set [Embed CCopyrightopyright IInformationnformation EEmbedmbed CopyrightCopyright DDataata Continues the sequential numbering for the file name Copyright Data]. Z PPhotographerhotographer even if a new folder is created. CCopyrightopyright HHolderolder Returns the file number of the first image saved to a Y folder to 0001 each time a new folder is created. Select [Reset File Number] to reset the file number to its default Does not embed copyright information in the Exif value. Y 6 data. t Memo Setting Z Embeds copyright information in the Exif data. • When the file number reaches 9999, a new folder is created and the file number is reset. 3 Select [Photographer] or [Copyright Holder], and press D. The text-entry screen appears.
4 Change the text. Up to 32 single-byte alphanumeric characters and symbols can be entered. y How to enter text (p.109)
5 Press F twice. t Memo • The Exif information can be checked in Detailed Information Display of the playback mode (p.17) or using the provided software “Digital Camera Utility 5”.
113 t Memo Displaying the Local Date and Time of D1 • Refer to “List of World Time Cities” (p.131) for cities that can the Specified City be selected as a hometown or destination. •Select [F Hometown] in Step 3 to change the city and DST The date and time set at the time of initial setting (“Initial settings for the hometown. Settings” (p.42)) serve as the date and time of your present • G and the local date and time appear in the control panel location and are reflected in the shooting date and time for when [Time Setting] is set to G. images. Setting the destination to a location other than your present location enables you to display the local date and time on the monitor when traveling abroad and also save images time- stamped with the local date and time.
1 Select [World Time] in the D1 menu. The [World Time] screen appears.
2 Select the time you wish to WWorldorld TTimeime display in [Time Setting]. TTimeime SSettingetting 6 DDestinationestination
Setting F (Hometown) or G LLondonondon 116:006:00 (Destination) can be selected. HHometownometown NNewew YYorkork 110:000:00
3 Select [G Destination] and press D. The [G Destination] screen appears.
4 Use CD to select a city. DDestinationestination Use R to change the region.
LLondonondon +6:00+6:00 DDSTST 116:006:00 CCancelancel OOKK
5 Select [DST] (daylight saving time), and use CD to select Y or Z.
6 Press E. The screen of Step 2 reappears.
7 Press F twice. 114 Restrictions on the Combinations of Special Functions
#: Restricted ×: Not available Clarity/ Distortion Electronic Skin Tone/ HDR Pixel Shift ASTRO- AA Filter Correction/ Save RAW Shutter Digital Capture Resolution TRACER Simulator Diffraction Data Filter Correction Flash ××× Continuous #*3 Shooting ××× × Bracketing/ Depth of Field #*3 #*4 Bracketing/ ××× Motion Bracketing Mirror Lock-up #*3 Shooting × Multi-exposure ××××#*3 × 7 Drive Mode Drive *1 *1 *2 *3 *4 Interval Shooting × # # × # # # Appendix Interval Composite ×××××#*3 × #*4 Interval Movie #*1 #*1 #*2 #*3 Record × × × Star Stream ×××××#*3 ×× HDR Capture ×× ××× Pixel Shift Resolution ×× ×× AA Filter Simulator ×××#*3 *1 There is a restriction on the minimum value for [Interval]. *2 Only when the timed exposure is set. *3 [Bracketing] is not available. *4 Only the final frame can be saved.
115 *6 To use an FA SOFT 28mm F2.8 lens, FA SOFT 85mm F2.8 lens, or F SOFT 85mm F2.8 lens, set [24 Using Aperture Ring] to [Enable] in Functions Available with Various the E4 menu. Pictures can be taken with the aperture you set, but Lenses only within a manually adjustable aperture range. *7 The Lens Correction features are available with the following FA All capture modes are available when a DA, DA L, D FA, FA J, lenses (Only Distortion Correction and Lateral Chromatic Aberration Adjustment can be used when the aperture ring is set to a position or FA lens is used, or when a lens with an 9 position is used with other than 9.): FAk24mm F2 AL [IF], FA 28mm F2.8 AL, FA 31mm the aperture ring set to the 9 position. F1.8 Limited, FA 35mm F2 AL, FA 43mm F1.9 Limited, FA 50mm Depending on the lens to use, the following restrictions apply. F1.4, FA 77mm F1.8 Limited, FAk85mm F1.4 [IF], FAk200mm F2.8 x: Available #: Restricted ×: Not available ED [IF], FAkMACRO 200mm F4 ED, FAk300mm F2.8 ED [IF], k k k DA FA 300mm F4.5 ED [IF], FA 400mm F5.6 ED [IF], FA 600mm F4 Lens FA J *6 M k k DA L *6 F A ED [IF], FA 28-70mm F2.8 ED [IF], FA 80-200mm F2.8 ED [IF], FA P k [Mount type] D FA and FA 250-600mm F5.6 ED [IF]. [KAF] *8 Fixed to [Spot]. [KAF2] [KAF] *9 J with the aperture set to wide open. (The aperture ring has no [KAF] [KA] [K] Function [KAF3] [KAF2] effect on the actual aperture value.) [KAF4] u Autofocus Caution (Lens only) x x x – – • When the aperture ring is set to a position other than 9 or a (With AF adapter 1.7×)*1 – – – # # lens without an 9 position or accessories such as an Manual focus extension tube are used, the camera does not operate unless *2 (With focus indicator) xxxxx [24 Using Aperture Ring] is set to [Enable] in the E4 menu. 7 (With matte field)
Appendix Refer to “Using the Aperture Ring” (p.118) for details. *4 Quick-shift focus # ×××× • When a retractable lens is attached and is not extended, you AF Active Area [Auto] xxx #*8 × cannot take pictures or use some functions. If the lens is retracted during shooting, the camera stops working. AE Metering [Multi-segment] xxxx × *9 G/H/I/J/K mode xxxx # About Mount Names L mode xxxx # DA and D FA lenses with a motor and FA zoom lenses with a power zoom use the KAF2 mount. (Of these lenses, the P-TTL auto flash *3 xxxx × lenses without an AF coupler use the KAF3 mount.) Automatic obtaining of the xxx The KAF3 mount equipped with an electromagnetic lens focal length information ×× diaphragm mechanism instead of an aperture control lever is *5 *7 Lens Correction # # ××× referred to as the KAF4 mount. *1 Lenses with a maximum aperture of F2.8 or faster. Only available at FA single focal length lenses (non-zoom lenses), DA and DA the 9 position. L lenses without a motor, and D FA, FA J, and F lenses use *2 Lenses with a maximum aperture of F5.6 or faster. the KAF mount. (The power zoom function is not compatible *3 Available when using the built-in flash, AF540FGZ, AF540FGZ II, with this camera.) AF360FGZ, AF360FGZ II, AF201FG, AF200FG, or AF160FC. Refer to respective lens manuals for details. *4 Only available with compatible lenses. *5 Distortion Correction and Peripheral Illumination Correction are disabled when a DA FISH-EYE 10-17mm lens is used. 116 Restrictions when using Compatibility with the Built-in Flash Lens the built-in flash Depending on the lens being used, the use of the built-in flash DA 18-250mm F3.5-6.3 ED Vignetting may occur if the may be limited. AL [IF] focal length is less than 35 mm. (As of December 2016) DA 18-270mm F3.5-6.3 ED Vignetting may occur if the SDM focal length is less than 24 mm. Restrictions when using Lens D FA 24-70mm F2.8 ED Vignetting may occur if the the built-in flash SDM WR focal length is less than 36 mm. DA FISH-EYE 10-17mm Vignetting may occur if the F3.5-4.5 ED [IF]/ focal length is 28 mm and the DA 12-24mm F4 ED AL/ FAk28-70mm F2.8 AL shooting distance is less than DA 14mm F2.8 ED [IF]/ 1m. DA 15mm F4 ED AL/ The built-in flash is not D FA 15-30mm F2.8 ED SDM WR/ available due to vignetting. FA SOFT 28mm F2.8/ The built-in flash always FAk300mm F2.8 ED [IF]/ FA SOFT 85mm F2.8 discharges fully. DA 560mm F5.6 ED AW/ FAk600mm F4 ED [IF]/ FAk250-600mm F5.6 ED [IF] F FISH-EYE 17-28mm Vignetting may occur if the F3.5-4.5 focal length is less than 20 mm. 7
When the focal length is less Appendix than 28 mm, or when the focal DA 16-45mm F4 ED AL length is 28 mm and the shooting distance is 1 m or less, vignetting may occur. When the focal length is 20 mm or less, or when the focal length DAk16-50mm F2.8 ED AL is 35 mm and the shooting [IF] SDM distance is less than 1.5 m, vignetting may occur. When the focal length is 24 mm DA 16-85mm F3.5-5.6 ED or less and the shooting DC WR distance is 0.8 m or less, vignetting may occur. When the focal length is less than 24 mm, or when the focal DA 17-70mm F4 AL [IF] length is 35 mm and the SDM shooting distance is 1 m or less, vignetting may occur. 117 Using the Aperture Ring E4 How to Achieve the Correct Exposure with the Aperture Ring Not Set to 9 The shutter can be released even if the aperture ring of the D The correct exposure can be achieved by the following 9 FA, FA, F, or A lens is not set to the position or a lens without procedures when the aperture ring is not set to 9. 9 an position is attached. 1 Set the mode dial to L. Select [Enable] in [24 Using Aperture 2244 UUsingsing AApertureperture RingRing 2 Set the aperture ring to the desired aperture. Ring] of the E4 menu. 1 DDisableisable 2 EEnablenable 3 Press M. The correct shutter speed will be set. SShutterhutter willwill rreleaseelease whenwhen 4 If the correct exposure cannot be achieved, adjust the aapertureperture rringing iiss nnotot ssetet ttoo tthehe ""A"A" ppositionosition ISO sensitivity. CCancelancel 2233 1 OOKK
The following restrictions apply depending on the lens being used. Lens Restriction D FA, FA, F, A, M (lens The aperture remains open.*1 only or with automatic The shutter speed changes in diaphragm accessories relation to the open aperture but such as Auto Extension an exposure deviation may occur. 7 Tube K)
Appendix D FA, FA, F, A, M, S (with diaphragm accessories such as Extension Tube K) Pictures can be taken with the set aperture value but an exposure Manual diaphragm lens deviation may occur. such as reflex lens (lens only) FA SOFT 28mm/ Pictures can be taken with the set FA SOFT 85mm/ aperture value within a manually F SOFT 85mm adjustable aperture range.*1 (lens only) *1 When the mode dial is set to L or M, the aperture can be stopped down to the selected value. t Memo • If the aperture ring is set to a position other than 9, the camera operates in J mode regardless of the mode dial setting except when set to L or M mode. • [F--] appears for the aperture indicator in the status screen, Live View screen, and viewfinder. 118 Performing Catch-in Focus Shooting E4 Setting the Focal Length A4
You can perform Catch-in Focus shooting using a manual focus The Shake Reduction function operates by obtaining the lens lens. The shutter is released automatically when the subject information such as focal length. Set the focal length when comes into focus. using a lens that the focal length information cannot be automatically obtained. 1 Attach a manual focus lens to this camera. 1 Set [24 Using Aperture Ring] to [Enable] in the 2 Set [22 Catch-in Focus] to [On] in the E4 menu. E4 menu. 3 Set the v/w switch to v and set [AF Mode] 2 Turn the camera off. to x. 3 Attach a lens to the camera and turn the camera 4 Place the camera on a fixed support such as a on. tripod. The [Input Focal Length] screen appears.
5 Adjust the focus to the position where the 4 Use AB to set the focal subject may pass and press 0 fully. length. IInputnput FocalFocal LLengthength Press C to select a value from When the subject comes into focus at the specified position, 3355 mmmm 7 the shutter is released automatically. the list. When using a zoom lens, select Appendix the actual focal length which the OOKK zoom is set to.
5 Press E. The camera returns to standby mode. t Memo • The focal length setting can be changed in [Input Focal Length] of the A4 menu.
119 *6 Available only when combined with the AF540FGZ, AF540FGZ II, AF360FGZ, or AF360FGZ II (two or more compatible external flashes Functions when Using an for Contrast Control Sync flash required). External Flash *7 Available only when combined with the AF540FGZ, AF540FGZ II, AF360FGZ, or AF360FGZ II. Use of the following external flashes (optional) enables a variety u Caution of flash modes, such as P-TTL auto flash mode. • Never press 1 on the camera when any external flash unit x : Available #: Restricted ×: Not available is attached to the camera. The built-in flash will hit the AF540FGZ Compatible Flash AF201FG external flash. If you want to use both at once, connect them Built-in AF540FGZ II AF200FG using an extension cord. Flash AF360FGZ Camera Function AF160FC AF360FGZ II • Flashes with the reversed polarity (the center contact on the hot shoe is minus) cannot be used due to the risk of damaging Red-eye reduction flash xxx the camera and flash. Auto Flash Discharge *1 xxx • Do not combine with accessories that have a different number of contacts, such as Hot Shoe Grip, as a malfunction Automatic switch to flash xxx sync speed may occur. • Combining with flashes from other manufacturers may cause Automatic setting of the aperture value in G or I xxx equipment breakdown. mode t Memo *2 *2 *2 7 P-TTL auto flash # # # • With the AF540FGZ, AF540FGZ II, AF360FGZ, or
Appendix Slow-speed Sync flash xxx AF360FGZ II, you can use the high-speed sync flash to discharge a flash and take a picture at a shutter speed faster Flash Exposure xxx Compensation than 1/180 seconds. Set the capture mode to I, K, or L. • By using two or more external flashes (AF540FGZ, AF assist light of the external #*3 flash × × AF540FGZ II, AF360FGZ, or AF360FGZ II) or by using these external flashes in combination with the built-in flash, you can Trailing Curtain Sync flash *4 xx #*5 use the wireless mode (controller flash) to shoot in P-TTL Contrast Control Sync flash #*6 x #*7 flash mode without connecting the flash units with a cord. In this case, set the camera channel on the external flashes. Slave flash × x × You can check the set channel in the status screen, Live View High-speed Sync flash × x × screen, and viewfinder. (p.14, p.19) Wireless flash #*7 #*7 ×
*1 Only the R mode is available for the capture mode. *2 Available only when using a DA, DA L, D FA, FA J, FA, F, or A lens. (When using a lens with an aperture ring, set the aperture ring to the 9 position.) *3 AF assist light is not available with the AF540FGZ or AF360FGZ. *4 Shutter speed of 1/90 seconds or slower. *5 Available with the AF201FG. 120 Using the GPS Unit Shooting Celestial Bodies
When the optional GPS unit O-GPS1 is attached to the camera, GPS information is saved in the shooting information of an Setting the ASTROTRACER A3 image, and furthermore, the following functions are available. Attach the GPS unit to the camera and turn the Displays the current 1 camera on. latitude, longitude, N 336°45.410'6°45.410' WW140°02.000'140°02.000' 0° altitude, direction, 889m9m Coordinated 2 Select [ASTROTRACER] in the A3 menu and Electronic 002/02/20172/02/2017 Universal Time 110:00:000:00:00 press D. Compass 11// (UTC), capture mode, 225050 FF5.65.6 11600600 00.0.0 The [ASTROTRACER] screen appears. and exposure value. Select [Electronic Compass] in “Shooting Info 3 Select [ASTROTRACER] and press D. Display” (p.16). Tracks and captures celestial bodies. 4 Select [On] and press E. AASTROTRACERSTROTRACER AASTROTRACERSTROTRACER By matching the movement of the camera’s PPreciserecise CCalibrationalibration ASTRO- built-in Shake Reduction unit with the movement TRACER of celestial bodies, celestial bodies can be EEnablesnables ASTROTRACERASTROTRACER ffunctionunction iinn BBulbulb mmodeode toto eliminateeliminate sstartar captured as individual points even when ttrailsrails dduringuring ttimedimed eexposuresxposures 7 CCancelancel OOKK shooting with a long exposure setting. (p.121) Appendix Automatically adjusts the camera’s date and Select [Precise Calibration] and press D. GPS Time time settings using information obtained from 5 The [Precise Calibration] screen appears. Sync GPS satellites. Set in [GPS/E-Compass] of the D3 menu. 6 Rotate the camera PPreciserecise CCalibrationalibration t Memo according to the • Refer to the manual of the GPS unit for details on how to instruction displayed on attach the unit and information on the unit’s functions. RRotateotate ccameraamera iinn eeachach ooff tthreehree the monitor. ddirectionsirections eensuringnsuring tthathat eeachach The result of calibration appears. rrotationotation eexceedsxceeds 118080 ddegreesegrees u Caution SStoptop • “Simple Navigation” cannot be used with this camera. 7 Press E. The screen of Step 4 reappears. If [The operation could not be completed correctly] appears, change the camera direction and perform a calibration again.
8 Press F twice. The camera returns to standby mode. 121 u Caution • When performing a calibration, be careful not to drop the Shooting with the ASTROTRACER camera. Wrap the strap around your wrist or take other preventive measures. 1 Set the mode dial to M and set the focus method • If the battery is removed, perform a calibration again after the to w. battery is put back in. • As the magnetic field environment varies depending on the 2 Set the shooting conditions. F 88.0.0 shooting location, a precise calibration must be performed at 11600600 each location when shooting images of celestial bodies with ASTROTRACER. • Changing the lens or the angle of the monitor after performing 9999999999 a calibration may have some effect on the magnetic field environment. In this case, perform a calibration again. Available operations M Enables/Disables the timed exposure. Q Changes the exposure time within the range from 10" to 5'00" when the timed exposure is enabled. R Changes the aperture value. 7 Z Performs a precise calibration. Appendix 3 Adjust the focus and press 0 fully. Shooting starts. 4 Press 0 fully again. Shooting stops. When the timed exposure is enabled, shooting stops automatically after the set time has elapsed. u Caution • This function cannot be used in some capture modes or in combination with some other functions. (p.115)
When the Monitor is too Bright For shooing in a dark place for a long period of time, you can change the monitor display color to red by setting [Night Vision LCD Display] to [On] in the D2 menu. When [Night Vision LCD Display] is assigned to X, you can turn the Night Vision LCD Display feature on or off by a simple button operation. (p.102) 122 Problem Cause Remedy Troubleshooting v cannot work well for low- contrast objects (the sky, white t Memo walls, etc.), dark colors, intricate designs, rapidly- • In rare cases, the camera may not operate correctly due to moving objects, or scenery shot The subject is causes such as static electricity, etc. This can be remedied by through a window or a net-like difficult to focus taking the battery out and putting it back in again. If the Autofocus does pattern. on. camera operates correctly, it does not require any repairs. not work. Lock the focus on another object located at the same Problem Cause Remedy distance as your subject, then The battery is not Check the orientation of the aim at the target and take a The camera does installed properly. battery. picture. Alternatively, use w. not turn on. The battery power Charge the battery. The subject is too Move away from the subject is low. close. and take a picture. The built-in flash is [AF Active Area] of Wait until charging is finished. The focus cannot Set [AF Active Area] to other being charged. Live View is set to be locked. than [Tracking]. (p.62) There is no Insert a memory card with [Tracking]. available space on available space or delete When the flash mode is set to the memory card. unwanted images. The built-in flash The flash mode is [Auto Flash Discharge], the Data is being Wait until processing is does not set to [Auto Flash flash does not discharge if the processed. finished. discharge. Discharge]. subject is bright. 7 The shutter cannot Change the flash mode. (p.57) The lens aperture Set the lens aperture ring to the Appendix be released. ring is set to a 9 position or select [Enable] in The camera is not The USB position other than [24 Using Aperture Ring] of the recognized when it Set [USB Connection] to [MSC] connection mode 9. E4 menu. (p.118) is connected to a in the D3 menu. (p.92) is set to [PTP]. The autofocus computer. mode is set to Activate [Dust Removal] from Set the focus method to w x and the the D5 menu. The Dust and adjust focus manually. subject is not in Dust or dirt Removal function can be The CMOS sensor focus. particles appear in activated every time the camera is dirty or dusty. images. is turned on and off. Refer to “Sensor Cleaning” (p.124) if the problem persists. Activate [Pixel Mapping] from Pixel defects such the D5 menu. as bright spots There are It takes about 30 seconds to and dark spots defective pixels in correct the defective pixels, so appear in the the CMOS sensor. be sure to install a fully charged image. battery.
123 t Memo Sensor Cleaning D5 • Please contact your nearest service center for professional cleaning as the CMOS sensor is a precision part. Raise the mirror up and open the shutter when cleaning the • You can use the optional Image Sensor Cleaning Kit O-ICK1 CMOS sensor with a blower. when cleaning the CMOS sensor. 1 Turn the camera off and remove the lens. 2 Turn the camera on. 3 Select [Sensor Cleaning] in the D5 menu and press D. The [Sensor Cleaning] screen appears.
4 Select [Mirror Up] and press E. The mirror rises up.
5 Clean the CMOS sensor with a blower. 6 Turn the camera off. 7 The mirror automatically returns to its original position. Appendix u Caution • Never use a spray blower or a blower with a brush. The CMOS sensor may be damaged. Do not wipe the CMOS sensor with a cloth. • Do not put the tip of the blower inside the lens mount area. If the power is turned off during cleaning, it may cause damage to the shutter, the CMOS sensor, and the mirror. Hold the camera with the lens mount down while cleaning the sensor so dust will fall away from the camera when the blower is used. • When the battery level is low, the message [Not enough battery power remaining to clean sensor] is displayed on the monitor. Install a fully charged battery. If the battery capacity becomes low during cleaning, a warning beep will sound. In this case, stop cleaning immediately.
124 Error Messages Description Error Messages The maximum folder number (999) is Image folder cannot being used, and no more images can be Error Messages Description be created saved. Insert a new memory card or format the card. The memory card is full and no more The image could not be saved because of Memory card full images can be saved. Insert a new Unable to store image memory card or delete unwanted files. a memory card error. There are no images that can be played The operation could not be The operation failed. Try the operation No image back on the memory card. completed correctly again. You are trying to play back an image in a You are trying to select more than the This image cannot format not supported by this camera. You maximum number of images for the be displayed may be able to play it back on a computer. No more images following functions. can be selected • Select & Delete There is no memory card inserted in the No card in the camera • RAW Development camera. •Protect The memory card has a problem, and There are no images that can be image capture and playback are Memory card error No image can be processed processed using the Digital Filter or RAW impossible. You may be able to play back Development function. or recover the images on a computer. This message appears when you try to The memory card you have inserted is perform Resize, Cropping, Digital Filter, unformatted or has been previously used Movie Edit, RAW Development, or Save Card is not formatted on another device and is not compatible This image cannot as Manual WB for images captured with with this camera. Use the card after be processed other cameras, or when you try to perform formatting it with this camera. 7 Resize or Cropping for minimum file size Appendix The write-protect switch on the memory images. Card is locked card you have inserted is locked. (p.137) You are trying to set a function that is not This function is not available A memory card not compatible with this available with the currently selected Cannot use this card in the current mode camera is inserted. capture mode. This image cannot You are trying to magnify an image that The camera will turn off because its be magnified cannot be magnified. The camera will turn off internal temperature is too high. Leave You are trying to delete an image that is to prevent damage from the camera turned off until it has had time This image is protected protected. Remove the protection from overheating to cool down before turning on the the image. (p.110) camera again. Shutter release is disabled. Not enough battery Pictures cannot be taken when a Ensure the zooming index on power remaining to retractable lens is attached and is not the lens is set to a position activate Pixel Mapping extended. (p.46) These messages appear when you try to that permits shutter release Not enough battery perform Pixel Mapping or Sensor power remaining to Cleaning, or to update the firmware if the clean sensor battery level is insufficient. Install a fully Not enough battery charged battery. power remaining to update the firmware Unable to update firmware. The firmware cannot be updated. The There is a problem with the update file is damaged. Try downloading firmware update file the update file again. 125 File Name: user-assigned name (default: Storage File IMGP) Main Specifications File No.: Sequential Numbering, Reset
Model Description Viewfinder TTL autofocus, auto-exposure SLR digital camera Type Pentaprism Finder Type with a built-in retractable P-TTL flash Coverage (FOV) Approx. 100% PENTAX KAF2 bayonet mount (AF coupler, lens Lens Mount Magnification Approx. 0.95× (50mm F1.4 at infinity) information contacts, K-mount with power contacts) Approx. 20.5 mm (from the view window) KAF4, KAF3, KAF2 (power zoom not compatible), Eye-Relief Length Usable Lenses Approx. 22.3 mm (from the center of lens) KAF, KA mount lenses Diopter Approx. -2.5 to +1.5 m-1 Image Capture Unit Adjustment Interchangeable Natural-Bright-Matte III focusing Image Sensor CMOS with a primary color filter, Size: 23.5 × 15.6 (mm) Focusing Screen screen Effective Pixels Approx. 24.32 megapixels Total Pixels Approx. 24.96 megapixels Live View Image sensor cleaning using ultrasonic vibrations Type TTL method using the CMOS image sensor Dust Removal “DR II” AF Method: Contrast detection AF Sensitivity ISO range: 100 to 819200 Autofocusing AF Active Area: Face Detection, Tracking, Multiple (Standard Output) • EV steps can be set to 1 EV, 1/2 EV, or 1/3 EV System AF Points, Select, Spot ISO Range (Maximum), ISO Range (Minimum) Focus Peaking: Highlight Edge, Extract Edge, Off ISO Sensitivity Options: AUTO, Tv Field of view: approx. 100%, Magnified view (up to 7 ISO AUTO Setting Minimum Shutter Speed: AUTO (Slow, Standard, 16×), Grid Display (4×4 Grid, Golden Section, Scale, Appendix Fast), Tv (1/6000 to 30 seconds) Display Square 1, Square 2, Grid Color: Black, White), Image Stabilizer Sensor-shift Shake Reduction (SR II) Histogram Display, Highlight Alert, Composition Adjustment AA Filter Moiré reduction using the SR unit: Off, Type1, Simulator Type2, Bracketing (2 images), Bracketing (3 images) LCD Monitor
File Formats Tiltable wide viewing angle TFT color LCD monitor Type featuring an air-gapless structure with a tempered- Recording RAW (PEF/DNG), JPEG (Exif 2.3 compliant), DCF glass front panel Formats 2.0 compliant Size 3.0 inches (aspect ratio 3:2) JPEG: q (24M: 6016×4000), p (14M: Dots Approx. 921K dots 4608×3072), o (6M: 3072×2048), r (2M: Recorded Pixels 1920×1280) Adjustment Brightness, saturation and colors adjustable RAW: 24M (6016×4000) Outdoor View Adjustable ±2 steps RAW (14bit): PEF, DNG Setting m l k Quality Level JPEG: (Best), (Better), (Good) Night Vision LCD On, Off • RAW + JPEG simultaneously recordable Display Color Space sRGB, AdobeRGB SD, SDHC*, and SDXC* memory cards Storage Media * UHS-I compatible Folder Name: Date (100_1018, 101_1019...) or Storage Folder user-assigned name (default: PENTX) 126 White Balance Shutter Type TTL method using the CMOS image sensor Mechanical shutter (electronically controlled vertical- Type Auto White Balance, Multi Auto White Balance, run focal plane shutter), Electronic shutter Daylight, Shade, Cloudy, Fluorescent Light [Mechanical shutter] Auto: 1/6000 to 30 seconds, (D: Daylight Color, N: Daylight White, W: Cool Manual: 1/6000 to 30 seconds (1/3 EV steps or 1/2 Preset Modes White, L: Warm White), Tungsten Light, n, EV steps), Bulb (timed exposure setting possible Manual White Balance (up to 3 settings), Color Shutter Speed from 10 seconds to 20 minutes) Temperature (up to 3 settings), Copying the white [Electronic shutter] Auto: 1/24000 to 30 seconds, balance settings of a captured image Manual: 1/24000 to 30 seconds (1/3 EV steps or 1/2 EV steps) Fine Adjustment Adjustable ±7 steps on A-B axis and G-M axis
Focus System Drive Modes Single frame, Continuous (H, M, L), Self-timer Type TTL phase-matching autofocus system (12 sec., 2 sec., continuous), Bracketing*1 (2, 3, or SAFOX 11, 27 points (25 cross type focus points in *1 Focus Sensor 5 frames), Depth of Field Bracketing (3 frames), the center) Motion Bracketing*1 (3 frames), Mirror Lock-up *2 *1 Brightness Range EV -3 to 18 (ISO100, at normal temperature) Shooting, Multi-exposure , Interval Shooting , Mode Selection Interval Composite*1, Interval Movie Record*1, Star Single AF (x), Continuous AF (y), Auto *1 AF Modes Stream select AF (z) *1 Available with Self-timer Focusing Area Auto (27 AF Points), Zone Select, Select, Expanded *2 Available with Continuous Shooting or Self-timer Selection Modes Area AF (S, M, L), Spot • Depth of Field Bracketing is available in J mode. • Motion Bracketing is available in I mode. AF Assist Light Dedicated LED AF assist light Max. approx. 7.0 fps, JPEG (q: m at 7 Exposure Control Continuous H): up to approx. 28 frames, RAW: up to approx. 8 frames, RAW+: up to approx. 7 frames Appendix TTL open-aperture metering using 86K pixel RGB Max. approx. 3.0 fps, JPEG (q: m at sensor Type Continuous M): up to approx. 70 frames, RAW: up to Metering modes: Multi-segment, Center-weighted, approx. 15 frames, RAW+: up to approx. 10 frames Continuous Spot Max. approx. 0.8 fps, JPEG (q: m at Shooting Metering Range EV -3 to 20 (ISO100 at 50mm F1.4) Continuous L): up to approx. 100 frames, RAW: up to approx. 100 frames, RAW+: up to approx. 25 frames Scene Analyze Auto, Program, Sensitivity Priority, • When the sensitivity is set to ISO100 Shutter Priority, Aperture Priority, Shutter & Aperture Capture Modes • The shooting speed slows down when the Priority, Manual, Bulb, USER1, USER2, USER3, electronic shutter is used or a higher sensitivity is USER4, USER5 set. EV Compensation ±5 EV (1/3 EV steps or 1/2 EV steps can be selected) Composite Mode: Additive, Average, Bright Multi-exposure Can be assigned to f, X, Y, and Z in Number of Shots: 2 to 2000 times AE Lock [Button Customization].
127 [Interval Shooting] Capture Functions Interval: 2 sec. to 24 hr., Standby Interval: minimum Auto Select, Bright, Natural, Portrait, Landscape, time or 1 sec. to 24 hr., Number of Shots: 2 to 2000 Custom Image Vibrant, Radiant, Muted, Flat, Bleach Bypass, times, Start Interval: Now, Self-timer, Set Time Reversal Film, Monochrome, Cross Processing [Interval Composite] Interval: 2 sec. to 24 hr., Standby Interval: minimum Cross Processing Random, Preset 1-3, Favorite 1-3 time or 1 sec. to 24 hr., Number of Shots: 2 to 2000 Extract Color, Replace Color, Toy Camera, Retro, times, Start Interval: Now, Self-timer, Set Time, Digital Filter High Contrast, Shading, Invert Color, Unicolor Bold, Composite Mode: Additive, Average, Bright, Save Bold Monochrome Process: On, Off [Interval Movie Record] Clarity -4.0 to +4.0 Recorded Pixels: z, u, t, Recording Format: Skin Tone Type1, Type2, Off Interval Shooting Motion JPEG (AVI), Interval: 2 sec. to 24 hr., Auto, Type1, Type2, Type3, Advanced HDR, Off Standby Interval: minimum time or 1 sec. to 24 hr., Bracket Value: adjustable Number of Shots: 8 to 2000 times (When z is HDR Capture Auto Align (automatic composition correction selected: 8 to 500 times), Start Interval: Now, Self- function): available timer, Set Time [Star Stream] Pixel Shift On, Off Recorded Pixels: z, u, t, Recording Format: Resolution Motion Correction: On, Off Motion JPEG (AVI), Standby Interval: minimum time Distortion Correction, Peripheral Illumination or 1 sec. to 24 hr., Number of Shots: 8 to 2000 times Lens Correction Correction, Lateral Chromatic Aberration (When z is selected: 8 to 500 times), Start Interval: Adjustment, Diffraction Correction Now, Self-timer, Set Time, Fade-out: Off, Low, Medium, High D-Range Settings Highlight Correction, Shadow Correction Noise Reduction Slow Shutter Speed NR, High-ISO NR Flash 7 Horizon SR On: corrects up to 1.0 degree
Appendix Built-in retractable P-TTL pop-up flash Correction SR Off: corrects up to 1.5 degrees Guide number: approx. 6.0 (ISO100/m) Built-in Flash Composition Adjustment range of ±1 mm up, down, left or right Angle of view coverage: equivalent to 28mm lens in Adjustment (±0.5 mm when rotated); rotating range of ±1 degree 35 mm format Displayed in viewfinder (horizontal direction only); Auto Flash Discharge (Scene Analyze Auto), Auto Electronic Level displayed on monitor (horizontal direction and Flash + Red-eye Reduction (Scene Analyze Auto), vertical direction) Flash On, Flash On + Red-eye Reduction, Slow- Auto, Standard, Hi-speed Priority, DOF Priority Flash Modes speed Sync, Slow-speed Sync + Red-eye Program Line Reduction, Trailing Curtain Sync, Manual Flash (Deep), DOF Priority (Shallow), MTF Priority Discharge (FULL to 1/128 power), Wireless Flash Discharge (Controller Flash) Movie Sync Speed 1/180 seconds Recording Format MPEG-4 AVC/H.264 (MOV) Flash Exposure -2.0 to +1.0 EV Recorded Pixels/ u (1920×1080, 60i/50i/30p/25p/24p) Compensation Frame Rate t (1280×720, 60p/50p) P-TTL, Leading Curtain Sync, Trailing Curtain Sync, AF Method: Contrast detection AF Contrast Control Sync*, High-speed Sync, Wireless AF Mode: Single AF (x), Continuous AF External Flash Sync (y)* Autofocusing * Available with two or more compatible external * Continuous AF (y) is available only when a System flash units compatible lens is attached to the camera. AF Active Area: Multiple AF Points, Select, Spot Focus Peaking: Highlight Edge, Extract Edge, Off
128 Built-in stereo microphone, external microphone Development options: Select single image, Select Sound (stereo recording compatible) multiple images, Select a folder Recording Sound Level: adjustable Development parameters: White Balance, Custom Image, Sensitivity, Clarity, Skin Tone, Digital Filter, Up to 4 GB or approx. 25 minutes; automatically HDR Capture, Pixel Shift Resolution, Shadow Recording Time stops recording if the internal temperature of the RAW Correction, High-ISO NR, Distortion Correction, camera becomes high. Development Peripheral Illumination Correction, Lateral Chromatic Auto Select, Bright, Natural, Portrait, Landscape, Aberration Adjustment, Diffraction Correction, Color Custom Image Vibrant, Radiant, Muted, Flat, Bleach Bypass, Fringe Correction, File Format (JPEG, TIFF), Aspect Reversal Film, Monochrome, Cross Processing Ratio, JPEG Recorded Pixels, JPEG Quality, Color Cross Processing Random, Preset 1-3, Favorite 1-3 Space Extract Color, Replace Color, Toy Camera, Retro, Image Rotation, Color Moiré Correction, Resize, Digital Filter High Contrast, Shading, Invert Color, Unicolor Bold, Cropping (aspect ratio can be changed and tilt Bold Monochrome Editing Features correction is available), Movie Edit (dividing a movie file and deleting unwanted segments), Capturing a Playback Functions JPEG still picture from a movie, Save RAW Data Single image, Multi-image display (6, 12, 20, 35, and Customization 80 thumbnails), Image magnification (Up to 16×, Quick Zoom), Grid Display (4×4 Grid, Golden USER Modes Up to 5 settings can be saved. Section, Scale, Square 1, Square 2, Grid Color: C1, C2, C3 Black, White), Rotated image display, Histogram Assignable items: Sensitivity, EV Compensation, Display (Y histogram, RGB histogram), Highlight Playback View Bracket Value, Custom Image, AF Mode, AF Active Alert, Auto Image Rotation, Detailed Information Area, Focus Peaking, Program Line, Shutter Mode Function Dial Display, Copyright Information (Photographer, Selection, Recorded Pixels (Still picture: q, p, Copyright Holder), GPS information (Latitude, o, r; Movie: u, t), AA Filter Simulator, Grid 7 Longitude, Altitude, Coordinated Universal Time
Display, LCD Display Options, Image Magnification, Appendix (UTC)), Direction, Folder Display, Calendar Filmstrip Outdoor View Setting Display, Slideshow Custom Functions 24 items Single image, all images, select & delete, folder, Delete Mode Memory 18 items Instant Review image X button: EV Compensation, Sensitivity, Preview, Base Parameter Adj, Extract Color, Replace Color, AE Lock, Change AF Area, One Push File Format, Toy Camera, Retro, High Contrast, Shading, Invert Electronic Level, Wi-Fi, Night Vision LCD Display, Color, Unicolor Bold, Bold Monochrome, Tone Digital Filter Operation Control Lock Expansion, Sketch, Water Color, Pastel, Y/Z button: EV Compensation, Sensitivity, Posterization, Miniature, Soft, Starburst, Fish-eye, Button Preview, AE Lock, Change AF Area, One Push File Slim, Monochrome Customization Format, Electronic Level, Operation Control Lock f button: Enable AF1, Enable AF2, Cancel AF, AE Lock E-dials (front/rear): customizable to each exposure mode AF.S Setting: Focus-priority, Release-priority 1st Frame Action in AF.C: Auto, Focus-priority, Release-priority Action in AF.C Continuous: Auto, Focus-priority, AF Customization FPS-priority Hold AF Status: Off, Low, Medium, High AF in Interval Shooting: Locks focus at 1st exposure, Adjusts focus for each shot 129 Type1: Disables exposure control operations in Dimensions and Weight Enable/Disable standby mode Approx. 131.5 mm (W) × 101.0 mm (H) × 76.0 mm Dimensions Control Type2: Disables the control functions of ABCD, (D) (excluding protrusions) E, and F in standby mode Approx. 703 g (including dedicated battery and an Text Size Standard, Large Weight SD Memory Card) World Time World Time settings for 75 cities (28 time zones) Approx. 643 g (body only) ±10 steps, uniform adjustment for all lenses or AF Fine Operating Environment individual adjustment for each lens (up to 20 values Adjustment can be saved) Temperature -10 to 40°C (14 to 104°F) Self-timer: On, Off Indicator Lamps Humidity 85% or less (no condensation) GPS LED Indicators: On, Off Names of “Photographer” and “Copyright Holder” Included Accessories Copyright are embedded to the image file. A revision history Information Strap O-ST162, Rechargeable Lithium-ion Battery can be checked using the provided software. D-LI109, Battery Charger D-BC109, AC plug cord, Software (CD-ROM) S-SW167, Operating Manual Power Supply Package
Appendix fully charged lithium-ion battery at a temperature GPS Unit Altitude, Coordinated Universal Time (UTC)), of 23°C. Actual results may vary depending on the Direction, Electronic Compass, ASTROTRACER shooting conditions/circumstances. Cable Release Cable Switch CS-310 Interfaces Battery Grip D-BG7 USB 2.0 (micro B), external power supply terminal, Grip S: O-GP167 Connection Port stereo microphone/cable release input terminal Grip Grip M: O-GP1671 (ø3.5 mm connector) Grip L: O-GP1672 USB Connection MSC/PTP USB/Video output terminal Video Output • SlimPort®-to-HDMI® adapter required
Wireless LAN Standards IEEE 802.11b/g/n (standard wireless LAN protocol) Frequency (Center 2412 to 2462 MHz (channels: Ch 1 to Ch 11) Frequency) Authentication: WPA2 Security Encryption: AES
130 Approximate Image Storage Capacity and List of World Time Cities Playback Time The following cities can be set as Hometown and Destination. (When using the fully charged battery) Region City Flash Photography Honolulu, Anchorage, Vancouver, San Tempe- Normal Playback North Battery 50% 100% Francisco, Los Angeles, Calgary, Denver, rature Shooting Time America Use Use Chicago, Miami, Toronto, New York, Halifax 270 420 390 360 Central D-LI109 23°C minutes Mexico City, Lima, Santiago, Caracas, Buenos and South Aires, Sao Paulo, Rio de Janeiro • Tested in compliance with CIPA standard using a fully charged lithium- America ion battery at a temperature of 23°C. Actual results may vary depending on the shooting conditions/circumstances. Lisbon, Madrid, London, Paris, Amsterdam, Milan, Rome, Copenhagen, Berlin, Prague, Europe Stockholm, Budapest, Warsaw, Athens, Helsinki, Approximate Image Storage Capacity by Size Moscow (When using an 8 GB memory card) Dakar, Algiers, Johannesburg, Istanbul, Cairo, Africa/ Jerusalem, Nairobi, Jeddah, Tehran, Dubai, Recorded JPEG Quality PEF West Asia Karachi, Kabul, Male, Delhi, Colombo, Pixels m l k Kathmandu, Dacca q 24M 527 1192 2339 151 Yangon, Bangkok, Kuala Lumpur, Vientiane, 7
p 14M 889 1996 3837 – Singapore, Phnom Penh, Ho chi Minh, Jakarta, Appendix East Asia o 6M 1964 4309 7923 – Hong Kong, Beijing, Shanghai, Manila, Taipei, r 2M 4723 9824 16374 – Seoul, Tokyo, Guam Perth, Adelaide, Sydney, Noumea, Wellington, • The number of storable images may vary depending on the subject, Oceania shooting conditions, selected capture mode, and memory card, etc. Auckland, Pago Pago
131 Operating Environment for USB Connection Macintosh and Provided Software OS X 10.12, OS X 10.11, OS X 10.10, OS X 10.9, OS With the provided software “Digital Camera Utility 5”, you can or OS X 10.8 develop RAW images, make color adjustments, or check CPU Intel® Core™ 2 Duo or higher shooting information on a computer. Install the software from RAM 4 GB or more the provided CD-ROM (S-SW167). For installing and starting up the program: We recommend the following system requirements to connect Approx.100 MB or more of available space the camera to a computer with a commercially available USB HDD For saving image files: Approx. 10 MB/file (JPEG), cable and to use the software. Approx. 30 MB/file (RAW) Windows® Monitor 1280×1024 dots, 24-bit full color or higher t Memo ® ® Windows 10 (32-bit, 64-bit), Windows 8.1 (32- • Application software that supports both MOV (MPEG-4AVC/ ® OS bit, 64-bit), Windows 8 (32-bit, 64-bit), or H.264) and AVI (Motion JPEG) formats is required to play ® Windows 7 (32-bit, 64-bit) back movie files transferred to a computer. CPU Intel® Core™ 2 Duo or higher RAM 4 GB or more 7 For installing and starting up the program: Approx.100 MB or more of available space Appendix HDD For saving image files: Approx. 10 MB/file (JPEG), Approx. 30 MB/file (RAW) Monitor 1280×1024 dots, 24-bit full color or higher
132 Index
Symbols x ...... 60 Bleach Bypass (Custom Color Moiré Correction .... 87 A menus...... 24 AF.S Setting ...... 59, 61 Image) ...... 74 Color Space...... 48 C menus...... 29 AF/AE-L Button ...... 103 Bold Monochrome (Digital Color Temperature (White B menu...... 31 v/w switch ...... 44, 59 Filter) ...... 75, 87 Balance) ...... 73 D menus...... 32 Anti-aliasing filter ...... 79 Bracketing ...... 66 Color Temperature Steps E menus ...... 34 Aperture Priority Automatic Bracketing Order ...... 66 ...... 73 C mode...... 52 Exposure ...... 49 Bright (Custom Image) .... 74 Communication device .... 94 A/K/C switch Aperture value ...... 49 Brightness adjustment..... 76 Communication Info...... 94 ...... 44, 46, 52 Aspect Ratio ...... 86, 90 Brightness histogram...... 18 Composition Adjustment.. 80 ASTROPHOTO ...... 48 Built-in flash ...... 10, 57 Computer...... 92 Numerics ASTROTRACER ...... 121 Bulb (B) Mode Options .... 51 Continuous mode (AF Mode) 1st Frame Action in AF.C Auto (AF Active Area)...... 60 Bulb Exposure ...... 49, 51 ...... 60 ...... 59 Auto EV Compensation ... 34 Button ...... 11 Continuous playback ...... 84 4-way Controller Settings Auto Flash + Red-eye...... 57 Button Customization .... 102 Continuous Shooting ...... 65 ...... 61 Auto Flash Discharge ...... 57 Contrast (Custom Image) Auto Image Rotation...... 84 C ...... 74 A R mode...... 44 Cable release ...... 53 Contrast detection AF...... 59 7 AA Filter Simulator ...... 79 Auto Power Off ...... 42 Cable release terminal .... 53 Control panel ...... 15, 21 Appendix AC adapter ...... 40 Auto Select (Custom Image) Calendar Filmstrip Display Controller flash ...... 120 Action in AF.C Continuous ...... 74 ...... 83 Copyright Holder...... 113 ...... 59 Auto SR Off ...... 64 Calibration ...... 121 Copyright Information .... 113 AdobeRGB ...... 48 Auto White Balance (White Capture mode...... 48 Correcting images ...... 76 AE Lock ...... 51 Balance) ...... 72 Card...... 40 Create New Folder ...... 111 AE Metering...... 57 Autofocus ...... 59 Card access lamp...... 10 Cropping...... 86 AE-L with AF Locked...... 34 J bracketing...... 67 Catch-in Focus ...... 119 Cross Processing (Custom AF Active Area ...... 60, 62 AV device ...... 85 Center-weighted metering Image) ...... 74 AF Assist Light ...... 10, 60 J mode ...... 49 ...... 57 n (White Balance) ..... 72 AF coupler ...... 10 AWB in Tungsten Light.... 72 Certification Marks...... 138 Custom Image ...... 74 AF Fine Adjustment...... 63 Changing the image size Custom Setting menus .... 34 AF frame...... 45, 46 B ...... 86 Customization...... 22, 102 AF in Interval Shooting .... 71 M mode ...... 49 Charging the battery...... 38 AF Mode...... 60, 62 Base Parameter Adjustment Charging time ...... 38 D AF point ...... 60 (Digital Filter) ...... 87 City names ...... 42, 131 Date Adjustment...... 43 AF with Live View ...... 61 Battery ...... 38 Clarity ...... 78 Date Format...... 43 AF with Viewfinder...... 59 Battery grip ...... 39 Cleaning ...... 124 Daylight (White Balance) z ...... 60 Battery grip terminal ...... 10 Cloudy (White Balance)... 72 ...... 72 y...... 60 Color Fringe Correction ... 90 DC input terminal...... 40 133 Delete ...... 47 Error messages ...... 125 Framerate...... 48 Initial settings...... 42 Deleting all images ...... 31 EV Compensation ...... 56 Function Dial ...... 21, 105 Initializing a memory card Deleting selected images EV Steps ...... 50 Fx1/Fx2/Fx3 button ...... 102 ...... 44 ...... 82 Exif data ...... 113 Input Focal Length...... 119 Depth of field ...... 51 Expanded Area AF (AF G Instant Review...... 26, 45 Depth of Field Bracketing 67 Active Area)...... 60 GPS Time Sync...... 121 Interval Composite...... 70 Destination ...... 114 Exposure modes ..... 49, 109 GPS unit ...... 121 Interval Movie Record...... 70 Detailed Information Display External flash...... 120 GPS/E-Compass ...... 121 Interval Shooting...... 70 ...... 17 Extract Color (Digital Filter) Grid Display...... 26, 47 Interval Shooting Options Developing RAW images ...... 75, 87 Grip...... 36 ...... 71 ...... 90 Guide Display ...... 45 Invert Color (Digital Filter) Dial ...... 11 F Guide number...... 58 ...... 75, 87 Dial indicator...... 45 Face Detection (AF Active ISO AUTO Setting ...... 55 Diffraction Correction...... 77 Area)...... 62 H ISO sensitivity...... 54 ® Digital Camera Utility 5 File Format ...... 48 HDMI terminal ...... 85 ...... 91, 132 File Name ...... 112 HDR Capture...... 77 J Digital Filter ...... 75, 87 File No...... 113 HDR LANDSCAPE...... 48 JPEG ...... 48 Digital Preview...... 104 Filter ...... 75, 87 High Contrast (Digital Filter) JPEG Quality...... 48 Diopter adjustment lever Firmware Info/Options ..... 33 ...... 75, 87 JPEG Recorded Pixels.... 48 ...... 19 Fish-eye (Digital Filter) .... 87 High-ISO NR ...... 55 7 Direct keys...... 20 Flash...... 57, 120 Highlight Alert ...... 17, 26 K Highlight Correction...... 76 Kelvin...... 73 Appendix Disabling dial and button Flash compensation ...... 58 Flash On...... 57 High-speed Sync flash .. 120 operations...... 51 L Display Color ...... 43 Flash On + Red-eye ...... 57 Histogram Display ..... 18, 26 Landscape (Custom Image) Distortion Correction...... 77 Flat (Custom Image)...... 74 Hold AF Status ...... 59 ...... 74 DNG ...... 48 Flicker Reduction...... 26 Hometown ...... 42, 114 Language/W ...... 42 D-Range Settings ...... 76 Fluorescent - Cool White Horizon Correction ...... 26 Language setting...... 42 Drive Mode ...... 64 (White Balance)...... 72 Hot shoe ...... 10 Lateral Chromatic Aberration DST (daylight saving time) Fluorescent - Daylight Color I Adjustment...... 77 ...... 42, 114 (White Balance)...... 72 Image Capture Settings... 48 LCD Display...... 31, 43 Dust Removal...... 123 Fluorescent - Daylight White Image finishing tone ...... 74 LCD Display Settings..... 107 Dynamic range ...... 76 (White Balance)...... 72 Fluorescent - Warm White Image plane indicator ...... 10 Lens...... 37, 116 E (White Balance)...... 72 Image Rotation ...... 84 Lens Correction ...... 77 E-dial ...... 106 Focus indicator ...... 45 Image storage capacity Lens focal length ...... 119 Editing images...... 86 Focus Method...... 59 ...... 131 Lens information contacts Electronic Compass Focus Peaking...... 61 Image Sync ...... 94 ...... 10 ...... 16, 121 Folder display ...... 83 IMAGE Transmitter 2...... 93 Lens mount index ...... 37 Electronic Level ...... 16, 20 Folder Name...... 111 Image View (Image Sync) Lens unlock button ...... 37 Electronic Shutter ...... 52 Format ...... 44 ...... 94 Lens with aperture ring.. 118 Enable/Disable Control.... 51 Four-way controller.... 12, 20 Indicator Lamps...... 108 Link AE and AF Point ...... 57 134 Live View ...... 14 Multi-exposure...... 69 Power ...... 42 S Multi-image display...... 82 Precise Calibration ...... 121 Save as Manual WB...... 73 M Multiple AF Points (AF Active Preview...... 51, 104 Save Cross Processing ... 75 L mode ...... 49 Area)...... 62 Processing images ...... 86 Save Menu Location...... 23 Macintosh ...... 132 Multi-segment metering... 57 Program Automatic Exposure Save RAW Data ...... 45, 47 MACRO ...... 48 Muted (Custom Image).... 74 ...... 49 Save Rotation Info...... 84 Magnifying images .... 46, 47 Program Line...... 50 Save USER Mode ...... 108 Manual Exposure ...... 49 N Protect ...... 110 Scene Analyze Auto mode Manual Flash Discharge.. 57 Natural (Custom Image) .. 74 Protect All Images ...... 110 ...... 44 MANUAL LENS ...... 48 Night Vision LCD Display Provided software...... 132 SD Memory Card...... 40 Manual White Balance .... 73 ...... 122 PTP ...... 92 Select (AF Active Area) Mechanical Shutter...... 52 Noise Reduction ...... 50, 55 ...... 60, 62 Memory ...... 110 Q O Select Battery ...... 39 Memory card ...... 40 Quality ...... 48 Self-timer ...... 65 One Push File Format ... 103 Menu ...... 23 Quality level adjustment .. 78 Self-timer lamp ...... 10 One-Push Bracketing ...... 66 Meter Operating Time ..... 19 Quick Zoom ...... 47 Sensitivity ...... 54 Operating environment.. 132 Microphone...... 10, 53 Sensitivity Priority Automatic Optical Preview ...... 104 R Microphone terminal...... 53 Exposure ...... 49 Other Display Settings..... 27 Radiant (Custom Image) Microphone/cable release Sensitivity Steps ...... 54 Outdoor View Setting .... 108 ...... 74 terminal...... 10 Sensor Cleaning...... 124 RAW ...... 48 Miniature (Digital Filter) ... 87 Sequential Numbering... 113 7 P RAW Development...... 90 Mired ...... 73 Setting dial...... 21 Appendix G mode ...... 49 RAW File Format...... 48 Mirror ...... 10 Set-up menus ...... 32 Pastel (Digital Filter) ...... 87 Rec. Mode menus ...... 24 Mirror Lock-up Shooting .. 69 Shade (White Balance).... 72 PEF ...... 48 Recordable time ...... 52 Mode dial...... 45 Shading (Digital Filter) Peripheral Illumination Recorded Pixels ...... 48 Mode dial lock button ...... 45 ...... 75, 87 Correction...... 77 Recording Sound Level ... 53 Moiré reduction...... 79 Shadow Correction...... 76 Phase-matching AF ...... 59 Release While Charging.. 58 Monitor ...... 13, 41 Shake Reduction ...... 26 Photographer...... 113 Remote Capture (Image Monochrome (Custom Sharpness (Custom Image) Pixel Mapping...... 123 Sync) ...... 94 Image) ...... 74 ...... 74 Pixel Shift Resolution ...... 78 Replace Color (Digital Filter) Monochrome (Digital Filter) Shooting ...... 44 Playback Info Display ...... 75, 87 ...... 87 Shooting celestial bodies selection screen ...... 17 Reset ...... 33, 35 Motion Bracketing...... 68 ...... 121 Playback menu...... 31 Resize ...... 86 Mount type...... 116 Shooting Info Display...... 16 Playback mode...... 47 Retractable lens ...... 46 Movie Edit...... 89 Shooting with Live View... 46 Playback mode palette .... 81 Retro (Digital Filter) ... 75, 87 Movie menus ...... 29 Shooting with viewfinder.. 44 Playback Sound Volume Reversal Film (Custom Movie mode...... 52 Shutter & Aperture Priority ...... 54 Image) ...... 74 Movie SR...... 29 Automatic Exposure ...... 49 Portrait (Custom Image) .. 74 RGB histogram ...... 18 MSC ...... 92 Shutter Mode Selection ... 52 Posterization (Digital Filter) Rotating images ...... 84 Multi Auto White Balance Shutter Priority Automatic (White Balance)...... 72 ...... 87 Rotation Direction...... 107 Exposure ...... 49 135 Shutter speed ...... 49 TIFF...... 90 White Balance ...... 72 Single Frame Shooting.... 64 Time Setting ...... 114 Wi-Fi™ ...... 93 Single image display Timed exposure...... 51 Windows®...... 132 ...... 17, 47 Tone Expansion (Digital Wireless flash discharge Single mode (AF Mode) .. 60 Filter) ...... 87 ...... 57 Sketch (Digital Filter) ...... 87 Toy Camera (Digital Filter) Wireless LAN...... 93 Skin Tone ...... 78 ...... 75, 87 World Time ...... 114 Slideshow ...... 84 Tracking (AF Active Area) Slim (Digital Filter) ...... 87 ...... 62 Z SlimPort®...... 85 Trailing Curtain Sync ...... 57 Zone Select (AF Active Area) Slow Shutter Speed NR .. 50 TTL phase-matching AF ...... 60 Slow Sync + Red-eye ...... 57 ...... 59 Slow-speed Sync...... 57 Tungsten (White Balance) Smart Function ...... 21, 105 ...... 72 Smartphone...... 93 I bracketing...... 68 Soft (Digital Filter)...... 87 I mode...... 49 Sound ...... 52 Sound Effects ...... 32 U Speaker ...... 10 Unicolor Bold (Digital Filter) Specifications ...... 126 ...... 75, 87 7 Spot (AF Active Area) USB Connection...... 92, 132
Appendix ...... 60, 62 USB terminal ...... 92 Spot metering ...... 57 USB/video output terminal sRGB...... 48 ...... 10 Standby mode ...... 13 User registration ...... 9 Star Stream ...... 70 Using Aperture Ring ...... 118 Starburst (Digital Filter) ... 87 Status Screen...... 14 V Strap...... 36 Vibrant (Custom Image) .. 74 Strap lug ...... 36 Video Out Resolution ...... 85 Superimpose AF Area ..... 19 Viewfinder...... 19 H mode ...... 49 Viewfinder Overlay ...... 26 Switch...... 11 Volume ...... 32 Volume label...... 44 T K mode...... 49 W Tethered shooting ...... 93 WARRANTY POLICY.... 141 Text input...... 109, 111 Water Color (Digital Filter) Text Size ...... 42 ...... 87 Texture adjustment...... 78 WB Adjustable Range ..... 72 Thumbnail display ..... 47, 82 WB When Using Flash .... 72 136 • Do not press on the monitor with excessive force. This could cause it to break or malfunction. Care to be Taken During Handling • Be careful not to overtighten the screw in the tripod socket when using a tripod.
Before Using Your Camera Cleaning Your Camera
• When the camera has not been used for a long time, confirm that it is still • Do not clean the camera with organic solvents such as thinner, alcohol, working properly, particularly prior to taking important pictures (such as and benzine. at a wedding or when traveling). Contents of the recording cannot be • Use a lens brush to remove dust accumulated on a lens. Never use a guaranteed if recording, playback or transferring your data to a spray blower for cleaning as it may damage the lens. computer, etc. is not possible due to a malfunction of your camera or • Please contact your nearest service center for professional cleaning of recording media (memory cards), etc. the CMOS sensor. (This will involve a fee.) • Periodic inspections are recommended every one to two years to maintain high performance. About the Battery and Charger
• To keep the battery in optimum condition, avoid storing it in a fully Storing Your Camera charged state or in high temperatures. • If the battery is left inserted and the camera is not used for a long time, • Do not store the camera with preservatives or chemicals. Storage in high the battery will over-discharge and shorten the battery’s life. temperatures and high humidity can cause mold to grow on the camera. • Charging the battery a day before use or on the day of use is Remove the camera from its case and store it in a dry and well-ventilated recommended. place. • The AC plug cord provided with this camera is developed exclusively for • Avoid using or storing the camera where it may be exposed to static the battery charger D-BC109. Do not use it with other devices. electricity or electrical interference. • 6 Class II equipment: The provided battery charger is a Class II • Avoid using or storing the camera in direct sunlight or in locations where 7 (double-insulated) product. it may be exposed to rapid changes in temperature or to condensation. Appendix
Precautions on Carrying and Using Your Camera About SD Memory Cards
• Do not subject the camera to high temperatures or high humidity. Do not • The SD Memory Card is leave the camera in a vehicle, as the temperature can get very high. equipped with a write-protect • Do not subject the camera to strong vibrations, shocks, or pressure. Use switch. Setting the switch to a cushion to protect the camera from vibrations of motorcycles, LOCK prevents new data from automobiles, or ships. being recorded on the card, the • The temperature range for camera use is -10°C to 40°C (14°F to 104°F). stored data from being deleted, • The monitor may appear black at high temperatures, but will return to and the card from being normal at normal temperatures. formatted by the camera or a Write-protect • The monitor may respond more slowly at low temperatures. This is due computer. switch to liquid crystal properties, and is not a malfunction. • The SD Memory Card may be • Sudden temperature changes will cause condensation on the inside and hot when removing the card immediately after using the camera. outside of the camera. Place the camera in your bag or a plastic bag, • Do not remove the SD Memory Card or turn off the power while the card and remove it after temperatures of the camera and surroundings are is being accessed. This may cause the data to be lost or the card to be equalized. damaged. • Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salt. • Do not bend the SD Memory Card or subject it to violent impact. Keep it These could cause the camera to breakdown. Wipe the camera to dry away from water and store away from high temperatures. off any rain or water drops immediately. • Do not remove the SD Memory Card while formatting. The card may be • Do not attach or remove a lens when there are any rain or water drops damaged and become unusable. on the camera. If water enters the camera or the lens, a malfunction may occur. 137 • Data on the SD Memory Card may be deleted in the following circumstances. We do not accept any liability for data that is deleted if About the Wireless LAN Function 1. the SD Memory Card is mishandled by the user. 2. the SD Memory Card is exposed to static electricity or electrical • Do not use the camera in a place where electrical products, AV/OA interference. devices, and so on generate magnetic fields and electromagnetic 3. the SD Memory Card has not been used for a long time. waves. 4. the SD Memory Card or the battery is removed while the card is being • If the camera is affected by magnetic fields and electromagnetic waves, accessed. it may not be able to communicate. • If the SD Memory Card is not used for a long time, the data on the card • If the camera is used near a TV or a radio, poor reception or TV screen may become unreadable. Be sure to regularly make a backup of glitch may occur. important data on a computer. • If there are multiple wireless LAN access points near the camera and the • Format new SD Memory Cards. Also format SD Memory Cards same channel is used, search operation may not be executed correctly. previously used with other cameras. • The security of your data stored, sent or received is your own • Please note that deleting data stored on an SD Memory Card, or responsibility. formatting an SD Memory Card does not completely erase the original data. Deleted data can sometimes be recovered using commercially In the frequency band used by the camera, along with industrial, available software. If you are going to discard, give away or sell your SD scientific, and medical devices such as microwave ovens, premises Memory Card, you should ensure that the data on the card is completely radio stations (wireless stations requiring license) and specified low deleted or the card itself is destroyed if it contains any personal or power radio stations (wireless stations not requiring license) for sensitive information. mobile object identification used in factory production lines, etc., and • The data on your SD Memory Card should be managed at your own risk. amateur radio stations (wireless stations requiring license) are operated. 1. Before using the camera, confirm that premises radio stations and specified low power radio stations for mobile object identification and amateur radio stations are not operated in the vicinity. 7 2. In the event that the camera causes harmful radio wave
Appendix interference to premises radio stations for mobile object identification, immediately change the frequency being used to avoid interference. 3. If you have other troubles such that the camera causes harmful radio wave interference to specified low power radio stations for mobile object identification or to amateur radio stations, contact your nearest service center.
This camera conforms to the technical standards under the Radio Law and Telecommunications Business Law and the certification of conformance to technical standards can be displayed on the monitor. The certification marks of conformance to wireless technical standards under the Radio Law and Telecommunications Business Law can be displayed from [Certification Marks] of the D5 menu. Refer to “Using the Menus” (p.23) for how to use the menus.
138 Trademarks
• Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States of America and other countries. • Macintosh, macOS, OS X, and App Store are trademarks of Apple Inc., registered in the U.S. and other countries. • Intel and Intel Core are trademarks of Intel Corporation in the U.S. and/ or other countries. • SDXC Logo is a trademark of SD-3C, LLC. • Google, Google Play, and Android are trademarks or registered trademarks of Google Inc. • Wi-Fi is a registered trademark of Wi-Fi Alliance. • IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. • This product includes DNG technology under license by Adobe Systems Incorporated. • The DNG logo is either a registered trademark or trademark of Adobe Systems Incorporated in the United States and/or other countries. • HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and/or other countries. • Analogix and SlimPort are trademarks or registered trademarks of Analogix Semiconductor, Inc. • MHL, the MHL Logo, and Mobile High-Definition Link are trademarks or registered trademarks of MHL, LLC in the United States and other countries. 7 Appendix All other trademarks are the property of their respective owners. • This product uses the RICOH RT font designed by Ricoh Company Ltd. • This product supports PRINT Image Matching III. PRINT Image Matching enabled digital still cameras, printers and software help photographers to produce images more faithful to their intentions. Some functions are not available on printers that are not PRINT Image Matching III compliant. Copyright 2001 Seiko Epson Corporation. All Rights Reserved. PRINT Image Matching is a trademark of Seiko Epson Corporation. The PRINT Image Matching logo is a trademark of Seiko Epson Corporation.
139 AVC Patent Portfolio License Announcement on the Use of BSD-Licensed Software
This product is licensed under the AVC Patent Portfolio License for the This product includes software licensed under the BSD License. BSD personal use of a consumer or other uses in which it does not receive license is a form of license which permits the redistribution of the software remuneration to (i) encode video in compliance with the AVC standard provided that it is clearly stated that use is unwarranted, and a copyright (“AVC video”) and/or (ii) decode AVC video that was encoded by a notice and a list of licensing conditions are provided. The following consumer engaged in a personal activity and/or was obtained from a video contents are displayed based on the abovementioned licensing conditions provider licensed to provide AVC video. No license is granted or shall be and are not for the purpose of restricting your use of the product, etc. implied for any other use. Additional information may be obtained from MPEG LA, L.L.C. Tera Term See http://www.mpegla.com. Copyright (C) 1994-1998 T. Teranishi (C) 2004-2016 TeraTerm Project All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.
7 THIS SOFTWARE IS PROVIDED BY THE AUTHOR “AS IS” AND ANY
Appendix EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
140 servicing fees may be charged by the manufacturer’s WARRANTY POLICY representatives in that country. Notwithstanding this, your camera returned to the manufacturer will be serviced free of charge according to this procedure and warranty policy. In any All our cameras purchased through authorized bona fide case, however, shipping charges and customs clearance fees photographic distribution channels are guaranteed against to be borne by the sender. To prove the date of your purchase defects of material or workmanship for a period of twelve when required, please keep the receipt or bills covering the months from the date of your purchase. Service will be purchase of your camera for at least a year. Before sending rendered, and defective parts will be replaced without cost to your camera for servicing, please make sure that you are you within that period, provided the camera does not show sending it to the manufacturer’s authorized representatives or evidence of impact, sand or liquid damage, mishandling, their approved repair shops, unless you are sending it directly tampering, battery or chemical corrosion, operation contrary to to the manufacturer. Always obtain a quotation for the service operating instructions, or modification by an unauthorized repair charge, and only after you accept the quoted service charge, shop. The manufacturer or its authorized representatives shall instruct the service station to proceed with the servicing. not be liable for any repair or alterations except those made with its written consent and shall not be liable for damages from • This warranty policy does not affect the customer’s delay or loss of use or from other indirect or consequential statutory rights. damages of any kind, whether caused by defective material or • The local warranty policies available from our workmanship or otherwise; and it is expressly agreed that the distributors in some countries can supersede this liability of the manufacturer or its representatives under all warranty policy. Therefore, we recommend that you guarantees or warranties, whether expressed or implied, is review the warranty card supplied with your product at strictly limited to the replacement of parts as hereinbefore 7
the time of purchase, or contact our distributor in your Appendix provided. No refunds will be made on repairs by non-authorized country for more information and to receive a copy of service facilities. the warranty policy. Procedure During 12-month Warranty Period Any camera which proves defective during the 12-month warranty period should be returned to the dealer from whom you purchased the camera or to the manufacturer. If there are no representatives of the manufacturer in your country, send the camera to the manufacturer, with postage prepaid. In this case, it will take a considerable length of time before the camera can be returned to you owing to the complicated customs procedures required. If the camera is covered by warranty, repairs will be made and parts replaced free of charge, and the camera will be returned to you upon completion of servicing. If the camera is not covered by warranty, regular charges of the manufacturer or of its representatives will apply. Shipping charges are to be borne by the owner. If your camera was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and 141 For customers in USA Declaration of Conformity STATEMENT OF FCC COMPLIANCE According to 47CFR, Parts 2 and 15 for This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause Class B Personal Computers and Peripherals harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. We: RICOH IMAGING AMERICAS Changes or modifications not approved by the party responsible CORPORATION for compliance could void the user’s authority to operate the Located at: 5 Dedrick Place, West Caldwell, equipment. New Jersey 07006, U.S.A. This equipment has been tested and found to comply with the Phone: 800-877-0155 limits for a Class B digital device, pursuant to part 15 of the FCC Rules. FAX: 973-882-2008 These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment Declare under sole responsibility that the product identified generates, uses and can radiate radio frequency energy and, if not herein complies with 47CFR Parts 2 and 15 of the FCC rules as installed and used in accordance with the instructions, may cause a Class B digital device. Each product marketed is identical to harmful interference to radio communications. However, there is no the representative unit tested and found to be compliant with the guarantee that interference will not occur in a particular installation. standards. Records maintained continue to reflect the If this equipment does cause harmful interference to radio or equipment being produced can be expected to be within the television reception, which can be determined by turning the variation accepted, due to quantity production and testing on the 7 equipment off and on, the user is encouraged to try to correct statistical basis as required by 47CFR §2.909. Operation is
Appendix the interference by one or more of the following measures: subject to the following two conditions: (1) This device may not • Reorient or relocate the receiving antenna. cause harmful interference, and (2) This device must accept • Increase the separation between the equipment and receiver. any interference received, including interference that may • Connect the equipment into an outlet on a circuit different cause undesired operation. The above named party is from that to which the receiver is connected. responsible for ensuring that the equipment complies with the * Consult the dealer or an experienced radio/TV technician for standards of 47CFR §15.101 to §15.109. help. Product Name: SLR Digital Camera FOR CALIFORNIA, U.S.A. ONLY Model Number: PENTAX KP Perchlorate Material-special handling may apply. Contact person: Customer Service Manager The lithium battery used in this camera contains perchlorate material, which may require special handling. Date and Place: January, 2017 Colorado See www.dtsc.ca.gov/hazardouswaste/perchlorate
142 For customers in Canada Pour les utilisateurs au Canada Industry Canada (IC) Compliance Notice Industrie Canada (IC) Avis de Conformité This Class B digital apparatus complies with Canadian ICES- Cet appareil numérique de la classe B est conforme à la norme 003 (B). NMB-003 (B) du Canada.
This device complies with Industry Canada licence-exempt Le présent appareil est conforme aux CNR d’Industrie Canada RSS standard(s). Operation is subject to the following two applicables aux appareils radio exempts de licence. conditions: (1) this device may not cause interference, and L’exploitation est autorisée aux deux conditions suivantes : (2) this device must accept any interference, including (1) l’appareil ne doit pas produire de brouillage, et interference that may cause undesired operation of the device. (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en The available scientific evidence does not show that any health compromettre le fonctionnement. problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless Les connaissances scientifiques dont nous disposons n’ont mis devices are absolutely safe. Low power wireless devices emit en évidence aucun problème de santé associé à l’usage des low levels of radio frequency energy (RF) in the microwave appareils sans fil à faible puissance. Nous ne sommes range while being used. Whereas high levels of RF can produce cependant pas en mesure de prouver que ces appareils sans fil health effects (by heating tissue), exposure of low-level RF that à faible puissance sont entièrement sans danger. Les appareils does not produce heating effects causes no known adverse sans fil à faible puissance émettent une énergie fréquence health effects. Many studies of low-level RF exposures have not radioélectrique (RF) très faible dans le spectre des micro-ondes found any biological effects. Some studies have suggested that lorsqu’ils sont utilisés. Alors qu’une dose élevée de RF peut 7 some biological effects might occur, but such findings have not avoir des effets sur la santé (en chauffant les tissus), Appendix been confirmed by additional research. The KP has been tested l’exposition à de faibles RF qui ne produisent pas de chaleur n’a and found to comply with IC radiation exposure limits set forth pas de mauvais effets connus sur la santé. De nombreuses for an uncontrolled environment and meets RSS-102 of the IC études ont été menées sur les expositions aux RF faibles et radio frequency (RF) Exposure rules. n’ont découvert aucun effet biologique. Certaines études ont suggéré qu’il pouvait y avoir certains effets biologiques, mais ces résultats n’ont pas été confirmés par des recherches supplémentaires. Le KP a été testé et jugé conforme aux limites d’exposition aux rayonnements IC énoncées pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC.
143 For Customers in Europe For Switzerland: Used electrical/electronic equipment can be Information for Users on Collection and Disposal of Old returned free of charge to the dealer, even when you don’t Equipment and Used Batteries purchase a new product. Further collection facilities are listed on the home page of www.swico.ch or www.sens.ch. 1. In the European Union
These symbols on the products, packaging and/ Notice to Users in EEA Countries or accompanying documents mean that used This product complies with the essential requirements and electrical and electronic equipment and batteries provisions of RE Directive 2014/53/EU. should not be mixed with general household The CE Declaration of Conformity is available by accessing the waste. URL: http://www.ricoh-imaging.co.jp/english/support/ Used electrical/electronic equipment and declaration_of_conformity.html batteries must be treated separately and in and selecting the product applicable. accordance with legislation that requires proper treatment, recovery and recycling of these Operating frequency band: 2400 MHz - 2483.5 MHz products. Maximum radio-frequency power: 8.16 dBm EIRP By disposing of these products correctly you will help ensure that the waste undergoes the European importer: RICOH IMAGING EUROPE S.A.S. necessary treatment, recovery and recycling Parc Tertiaire SILIC 7-9, avenue Robert Schuman - B.P. 70102, 7 and thus prevent potential negative effects on 94513 Rungis Cedex, FRANCE the environment and human health which could Appendix otherwise arise due to inappropriate waste Manufacturer: RICOH IMAGING COMPANY, LTD. handling. 1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN
If a chemical symbol is added beneath the symbol shown above, in accordance with the Battery Directive, this indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in the battery at a concentration above an applicable threshold specified in the Battery Directive.
For more information about collection and recycling of used products, please contact your local authorities, your waste disposal service or the point of sale where you purchased the products.
2. In other countries outside the EU
These symbols are only valid in the European Union. If you wish to discard used products, please contact your local authorities or dealer and ask for the correct method of disposal. The CE Mark is a Directive conformity mark of the European Union. 144 e_kb581_cover_6mm.fm Page 2 Thursday, December 8, 2016 9:51 AM
Memo For Using Your Camera Safely About the Battery Charger and AC Adapter
We have paid close attention to the safety of this camera. When using this Warning camera, we request your special attention regarding items marked with the • Always use the battery charger and AC adapter exclusively developed following symbols. for this camera, with the specified power and voltage. Using a battery charger or AC adapter not exclusive to this camera, or using the Warning This symbol indicates that ignoring this item exclusive battery charger or AC adapter with an unspecified power or could cause serious personal injuries. voltage can cause a fire, electric shock, or camera breakdown. The specified voltage is 100 - 240V AC. Caution This symbol indicates that ignoring this item • Do not disassemble or modify the product. This can cause a fire or could cause minor or medium personal injuries, electric shock. or loss of property. • If the generation of smoke or strange odor from the product or other abnormality occurs, immediately discontinue using and consult your nearest service center. Continued use can cause a fire or electric shock. About the Camera • If water should happen to get inside the product, consult your nearest service center. Continued use can cause a fire or electric shock. • If you see a lightning flash or hear thunder during use of the battery Warning charger or AC adapter, unplug the power plug and discontinue using. Continued use can cause damage to the product, fire or electric shock. • Do not disassemble or modify the camera. High voltage areas are • Wipe off the power plug if it should become covered with dust. present inside the camera, with the risk of electric shock. Accumulated dust may cause a fire. • If the camera interior is exposed due to dropping or otherwise damaging • To reduce the risk of hazards, use only CSA/UL certified power supply the camera, never touch the exposed portion. There is a risk of electric cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, shock. one end with a molded-on male attachment plug cap (with a specified • Do not aim the camera at the sun or other strong light sources when NEMA configuration), and the other is provided with a molded-on female taking pictures or leave the camera sitting in direct sunlight with a lens connector body (with a specified IEC nonindustrial type configuration) or cap off. Doing so may cause the camera to malfunction or cause a fire. the equivalent. • Do not look at the sun or other strong light sources through a lens. Doing so may lead to a loss of eyesight or cause vision to be impaired. • If any irregularities occur during use, such as smoke and a strange odor, Caution stop using the camera immediately, remove the battery or the AC • Do not place or drop heavy objects on or forcefully bend the AC plug adapter, and contact your nearest service center. Continued use can cord. Doing so may damage the cord. Should the AC plug cord be cause a fire or electric shock. damaged, consult your nearest service center. • Do not touch or short-circuit the terminal area of the AC plug cord while Caution the cord is plugged in. • Do not handle the power plug with wet hands. This can cause an electric • Do not place your finger over the flash when discharging the flash. You shock. may burn yourself. • Do not drop the product, or subject it to violent impact. This can cause • Do not cover the flash with clothing when discharging the flash. the product to breakdown. Discoloration may occur. • Do not use the battery charger D-BC109 to charge batteries other than • Some portions of the camera heat up during use. There is a risk of low the rechargeable lithium-ion battery D-LI109. Attempting to charge other temperature burns when holding such portions for long periods. types of batteries may cause an explosion or heating, or may damage • Should the monitor be damaged, be careful of glass fragments. Also, be the battery charger. careful not to allow the liquid crystal to get on your skin or in your eyes or mouth. • Depending on your individual factors or physical condition, the use of the camera may cause itching, rashes or blisters. In case of any abnormality, stop using the camera and get medical attention immediately. e_kb581_cover_6mm.fm Page 1 Thursday, December 8, 2016 9:51 AM
RICOH IMAGING COMPANY, LTD. 1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN (http://www.ricoh-imaging.co.jp) Introduction 1 RICOH IMAGING EUROPE Parc Tertiaire SILIC 7-9, avenue Robert Schuman - B.P. 70102, S.A.S. 94513 Rungis Cedex, FRANCE Getting Started 2 (http://www.ricoh-imaging.eu) SLR Digital Camera RICOH IMAGING AMERICAS 5 Dedrick Place, West Caldwell, New Jersey 07006, U.S.A. CORPORATION (http://www.us.ricoh-imaging.com) Shooting 3 RICOH IMAGING CANADA 5520 Explorer Drive Suite 300, Mississauga, Ontario, L4W 5L1, CANADA INC. (http://www.ricoh-imaging.ca) Playback 4 Operating Manual RICOH IMAGING CHINA CO., 23D, Jun Yao International Plaza, 789 Zhaojiabang Road, Xu Hui District, LTD. Shanghai, 200032, CHINA Sharing 5 (http://www.ricoh-imaging.com.cn) Settings 6 http://www.ricoh-imaging.co.jp/english Appendix 7 This contact information may change without notice. Please check the latest information on our websites.
• Specifications and external dimensions are subject to change without notice. To ensure the best performance from your
54314 Copyright © RICOH IMAGING COMPANY, LTD. 2016 camera, please read the Operating Manual R01DTL16 Printed in Philippines before using the camera.