3M™ Packing List Envelopes
Total Page:16
File Type:pdf, Size:1020Kb
3M™ Packing List Envelopes Wide Variety of Choices for Document Control and Protection • Convenient peel-and-stick document protection • Non-printed and printed with standard messages • Custom sizes and/or custom printed messages • Reclosable 3M™ Zipper Closure Envelope is available in two sizes • Polyethylene backing/synthetic rubber adhesive/paper liner 181 153 • Backing thickness: 2.0 mil; Easy Inspection — For cross border shipping Secure Adhesion — High tack pressure sensitive Total thickness: 5.0 mil and other inspection situations, zipper closure adhesive on the back of the envelope grabs on envelopes open easily and close securely. Tough contact and holds securely even to curved and construction resists moisture and abrasion. flexible surfaces. T (Top Printed) top-load T1 side-load T1 INV side-load T3 PACKING LIST/ INVOICE ENCLOSED PACKING LIST/ INVOICE ENCLOSED 4.5" x 5.5" INVOICE ENCLOSED 4.5" x 5.5" 1,000/case 7" x 5.5" 1,000/case 1,000/case side-load side-load T1 PL side-load T2 T4 PACKING LIST PACKING LIST/ PACKING LIST/ ENCLOSED INVOICE ENCLOSED INVOICE ENCLOSED 4.5" x 5.5" 4.5" x 6" 5.5" x 10" 1,000/case 1,000/case 1,000/case 182 NP (Non-Printed) F (Full Face Printed) side-load NP1 side-load NP6 F1 NO PRINT (CLEAR) NO PRINT PACKING LIST/ 4.5" x 5.5" (CLEAR) side-load INVOICE ENCLOSED 1,000/case 9.5" x 12" 4.5" x 5.5" 1,000/case 1,000/case 182 NP2 side-load NO PRINT (CLEAR) Zipper Closure Envelope Custom Packaging 4.5" x 6" 1,000/case top-load NPZ-L NPZ-XL top-load NO PRINT (CLEAR) NO PRINT (CLEAR) NP9 8.5" x 11.5" 10" x 12.5" NP3 NO PRINT (CLEAR) 500/case 500/case NO PRINT (CLEAR) 7" x 6" 5.5" x 7" 1,000/case 1,000/case side-load top-load NP4 side-load FED1 NO PRINT NO PRINT Got the (CLEAR) (PERFED) zip! 5.5" x 10" 6.75" x 10.75" 1,000/case 500/case NP5 182 NO PRINT side-load (CLEAR) 7" x 10" 1,000/case 182 3M Packaging Solutions | October 2016 Edition 37 Glossary (cont.) PE* Recouperage Tack The abbreviation for polyethylene. Usually To salvage goods within a container that has The property of a pressure sensitive adhesive extruded in a single (mono) layer. broken or opened during shipment. that allows it to adhere to a surface under very slight pressure. It is determined by the Peel Adhesion Release Force ability of the adhesive to wet quickly the The force per unit width required to break the The measure of the force required to separate surface it contacts. bond between a pressure sensitive adhesive tape a unit width of pressure sensitive tape from a and the surface to which it has been applied release coated surface at a controlled angle Tear Resistance when the tape is peeled back at a controlled and speed. The force required to propagate a tear in a angle at a standard rate and condition. tape in a given direction after the tear has Remote Sensing been initiated. PLE The technique or process of obtaining data Packing List Envelope. or images from a distance. Telescoping A sideways sliding of the tape layers, one over Pouch Tape Retroreflective another, such that the roll looks like a funnel Tape with adhesive-free area within a Surface, material, or device that reflects light or a telescope, usually occurring over a period perimeter of pressures sensitive adhesive. back to its source. of time. When applied the adhesive-free area forms a RGT containment pouch. Reinforced Gum Tape. Tensile Strength The force required to break a unit width of PP* RSC tape by controlled pulling on opposite ends of Abbreviation for polypropylene. Usually Regular Slotted Carton. the piece. manufactured as a single (mono) layer via a casting process. Rubber Adhesive* Thickness (Caliper, Gauge) A pressure sensitive, viscoelastic blend of The perpendicular distance from one surface Pressure Sensitive polymeric rubber-based materials and of either a tape, backing or adhesive to the A term commonly used to designate a distinct tackifying resin. The rubber materials may be other, usually expressed in mils, thousandths category of adhesive tapes and adhesives which natural or synthetic. Rubber adhesives are a of an inch or millimeters. This is usually in dry form (solvent/water free) are aggressively very broad class of materials and come in measured under controlled slight pressure with and permanently tacky at room temperature many types to achieve different properties. a special gauge. and that firmly adhere to a variety of dissimilar surfaces upon mere contact without the need Shear Adhesion TSCA* of more than finger or hand pressure. These The time required, under specified test Toxic Substances Control Act. products require no activation by water, conditions (surface area, weight load), to slide a standard area of pressure sensitive tape U-Clip solvent, or heat in order to exert a strong Tape seal applied to an RSC carton with tape from a standard flat surface in a direction adhesive holding force toward such materials legs down both sides of the carton and across parallel to the surface. as paper, plastic, glass, wood, cement, and the center seam. metal. They have sufficient cohesive holding Single Faced (Coated) power and elastic nature so that, despite their A tape to which a pressure sensitive adhesive UL 723* UL 723 deals mainly with flammability. aggressive tackiness, they can be handled with is applied to only one side of the backing. the fingers and removed from smooth surfaces Unwind or Unwind Adhesion Solvent/Chemical Resistant* without leaving a residue. The force required to remove tape from a roll Ability to resist common solvents or chemicals. Quick Stick (Finger Tack, Initial Adhesion, under prescribed conditions. Wet Grab) Surface Energy (Surface Wetting Ability) The measure of surface tension in dynes. The Water Vapor Transmission (WVTR) See TACK. The weight of water vapor allowed through a lower the surface energy of a substrate, the controlled area of tape within a specified time Random Case Sealer more difficult it becomes for an adhesive or period and under controlled conditions. A case sealer that automatically adjusts for coating to wet out that surface. case width and height. Typically used for runs of different box sizes. Glossary *Compiled by 3M. 3M Packaging Solutions | October 2016 Edition 41.