DOCSLIB.ORG

Blades & Scalpels

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Blades & Scalpels Getting Straight to the Point Blades & Scalpels DeRoyal’s Blades & Scalpels DEROYAL BLADES & SCALPELS PRODUCT OFFERING DeRoyal offers the broadest selection of stainless steel and carbon steel blades and scalpels in partnership with Swann- Morton®, the worlds largest producer of surgical blades. We also understand that safety is of the utmost importance given the BBP OSHA regulations, so we proudly offer both metal reusable and plastic disposable retractable blade safety scalpels that are both cost effective and user friendly to meet your physicians’ requirements. CONTENT Page CANICA-SAFETY® REUSABLE SCALPEL HANDLE ......................................................................... 3 CANICA-SAFETY® HANDLES .................................................................................................... 4 ASSORTED BLADES ................................................................................................................. 4 LOADING, PASSING & REMOVAL USING CANICA-SAFETY HANDLE .......................................... 5 CANICA® EJECTABLE SCALPEL HANDLE .................................................................................... 6 IONFUSION® DISPOSABLE SCALPEL BLADES ............................................................................. 7 IONFUSION® DISPOSABLE SAFETY SCALPELS ........................................................................... 8 DISPOSABLE SAFETY SCALPELS ................................................................................................ 9 SWANN-MORTON® SCALPEL HANDLES ................................................................................... 10 SWANN-MORTON® SCALPEL BLADES ...................................................................................... 11 SWANN-MORTON® FINE SCALPEL BLADES .............................................................................. 12 SWANN-MORTON® FINE SCALPEL HANDLES ........................................................................... 13 SCALPEL BLADE REMOVER ....................................................................................................... 14 DISPOSABLE SCALPELS ............................................................................................................ 15 Canica and Canica-Safety are a registered trademarks of Canica Design, Inc.; Swann-Morton is a registered trademark of Swann-Morton, Ltd.; IonFusion is a registered trademark of IonFusion Surgical. 2 www.deroyal.com 800.251.9864 www.deroyal.com 800.251.9864 Getting Straight to the Point THE CANICA-SAFETY® REUSABLE RETRACTABLE/EJECTABLE SCALPEL HANDLE FROM DEROYAL • Allows retraction of the scalpel blade inside the handle before passing to reduce the risk of sharps injuries • Slider activation allows touchless disposal of used blades into a needle counter box • Is the only reusable handle that accepts most conventional carbon and stainless steel blades for easy conversion and maximum savings • Similar in length, weight, and feel to a traditional scalpel handle to provide surgeon comfort and familiarity • Ambidextrous design for both right- and left-handed surgeons • Constructed of high-quality anodized aluminum and stainless steel • Two-piece reusable handle uses standard hospital protocol for sterilization • Even more cost savings when used with Swann-Morton® and IonFusion™ blades from DeRoyal • Two-year warranty • Patent pending Notch in handle allows blade identification when retracted Separates into two pieces for easy cleaning. Similar in size and weight to a standard scalpel handle Laser-etched scale for measurements. 3 www.deroyal.com 800.251.9864 www.deroyal.com 800.251.9864 DeRoyal’s Blades & Scalpels Canica-Safety® Handles Product No. Description Quantity D6907,D6917 & D6908 Fits Blades Sizes D6907 #3 Canica-Safety Reusable Handle 5/Cs 6, 10, 10A, 11, 11P, D6917 #3 w/Dissector Feature 5/Cs E11, 13, 14, 15, D6908 #3L Canica-Safety Reusable Handle 5/Cs 15A, 15C, 15T, 16, 40 D6909, D6919 & D6910 Fits Blades Sizes D6909 #4 Canica-Safety Reusable Handle 5/Cs 18, 19, 20, 21, 22 D6919 #4 w/Dissector Feature 5/Cs 23, 24, 25, 25A, 26 D6910 #4L Canica-Safety Reusable Handle 5/Cs All Canica-Safety® Handles are packaged non-sterile, latex safe. Assorted Blades Swann-Morton Swann-Morton IonFusion Carbon Stainless “Golden Edge” DeRoyal Blades* Steel Steel Stainless Steel #10 Blade D6201 D6301 D6221 #10A Blade N/A D6302 N/A #11 Blade D6203 D6303 D6223 #15 Blade D6205 D6305 D6225 #15C Blade N/A D6321 N/A #15T Blade N/A D6392 N/A #20 Blade D6206 D6306 D6226 #21 Blade D6207 D6307 N/A #22 Blade D6208 D6308 N/A #23 Blade D6210 D6310 N/A #24 Blade N/A D6311 N/A Ergonomic, non-slip grip *All DeRoyal Blades are packaged sterile, latex safe, 200 per case. Dissector feature 4 www.deroyal.com 800.251.9864 www.deroyal.com 800.251.9864 Getting Straight to the Point BLADE LOADING, PASSING & REMOVAL USING ® THE CANICA-SAFETY HANDLE Loading and Passing Blades are installed in the Canica-Safety® Handle using traditional methods, and then retracted into the handle for passing. Removal Position loaded Slide button to release blade. Blade drops into box for The Canica-Safety® Canica-Safety® Handle collection and counting. Handle is ready for a over needle counter box. new blade. 5 www.deroyal.com 800.251.9864 www.deroyal.com 800.251.9864 DeRoyal’s Blades & Scalpels Canica® Ejectable – Blade #3 Scalpel Handle • Accepts #6, #16 blades • Push-button blade ejection for disposal minimizes risk of sharps injuries and potential occupational exposures to blood bourne pathogens • Pen-style grip etched with fine rings for total rotational finger-tip control for plastics procedures • Packaged non-sterile • Latex safe • U.S. patent pending Product No. Description Size D6905 Canica Ejectable - Blade #3 Safety Scalpel 1/Cs 6 www.deroyal.com 800.251.9864 www.deroyal.com 800.251.9864 Getting Straight to the Point IonFusion® Disposable Scalpel Blades • The result of years of metallurgical research • A superior quality blade that functions at unprecedented levels • Stainless steel treated with an ion annealing process to reduce brittleness, creating a highly resilient, atomically sharpened cutting edge • Signature “champagne gold” edge indicates superior sharpness and edge-retention with increased longevity of use • One IonFusion™ Surgical Scalpel Blade replaces multiple conventional blades, based on usage data • Ideal for plastic, orthopedic, and podiatry procedures • Reduces blade requirements for lower costs, less blade disposal, and decreased operating room time • Less blade handling for decreased accident potential • Available in easily recognized, industry-accepted sizes and quantities U.S. patent #6,330,750 B1. Other foreign patents have been issued and other U.S. patents are pending. • Packaged sterile • Latex safe Product No. Description Size D6221 #10 IonFusion Blade 200/Cs D6223 #11 IonFusion Blade 200/Cs D6225 #15 IonFusion Blade 200/Cs D6226 #20 IonFusion Blade 200/Cs 7 www.deroyal.com 800.251.9864 www.deroyal.com 800.251.9864 DeRoyal’s Blades & Scalpels IonFusion® Disposable Safety Scalpels With Retractable Blades • Only safety scalpels that offer you the IonFusion™ Surgical Blade • Comes in three popular blade sizes: #10, #11, and #15 • Color coded sliders to denote blade size and a red body to indicate biohazard • Signature “champagne gold” edge indicating the superior sharpness and edge-retention of IonFusion’s™ technology with its increased longevity of use • Clinically reviewed and industry listed as a sharps safety device meeting OSHA requirements • Offers consistent quality, sharpness, and functionality tested to withstand surgical blade breakage while increasing staff safety through positive stop advancement and retraction of the blade • Ideal for use in a variety of procedures and disciplines, from sensitive plastic surgery to rugged orthopedic work • Provides full blade visibility at all times to help prevent accidental injury • Ribbed, slip-resistant finger grips ensure a secure grip in gloved hands, accommodating a variety of hand positions • Latex safe and available in easily recognized, industry-accepted sizes, and quantities • U.S. Patents 5,531,754 and 6,254,621 Product No. Description Size D4610 #10 IonFusion Safety Scalpel, Black Slider 50/Cs D4611 #11 IonFusion Safety Scalpel, Blue Slider 50/Cs D4615 #15 IonFusion Safety Scalpel, Green Slider 50/Cs 8 www.deroyal.com 800.251.9864 www.deroyal.com 800.251.9864 Getting Straight to the Point Disposable Safety Scalpels With Retractable Blades • The industry’s only patented* safety scalpel that allows a controlled retraction of the entire blade • Broad selection for protection in every department of the hospital • Safe and easy to open, with temporary forward locking to prevent accidental retractions • Permanent lock position for disposal now standard on all versions • 10 different stainless steel blade sizes, with color-coded sliders for easy identification • Ribbed, slip-resistant finger grips for a secure hold in gloved hands, accommodating a variety of hand positions • High-visibility red color denotes a biohazard to ensure proper disposal in sharps container • Full blade visibility at all times to reduce the chance of accidental injury • Designed by Dr. Shackleford, a cardiovascular surgeon, in conjunction with a safety engineer • Clinically reviewed and industry-listed as sharps safety device meeting O.S.H.A. requirements • Packaged sterile • Latex safe * U.S. Patent # 5,531,754; U.S. Patent # 6,254,621 Product No. Description Size D4506 #6 Safety Scalpel, Purple
Load more

Recommended publications
  • Utility Knives & Blades
    Utility Knives & Blades www.irwin.com Utility Knives & Blades Utility Blades IRWIN® 4-Point Snap Blades The new IRWIN 4-Point snap blade combines the toughness of a traditional blade with the functionality of a snap blade. When one edge dulls, just snap the tip for another. With four cutting edges, these blades are built to last twice as long as traditional carbon blades. [2] 4-POINT SNAP BLADE FEATURES 1. Snaps on the score for new sharp tip [1] 2. Four notches for full blade extension LONGER LIFE* * vs. traditional carbon blades 1764983 (1782112*) Bi-Metal Utility Blades Bi-Metal Safety Blades 4-Point Snap Blades 2084100 2088100 1764983 (1782112*) • Welded Bi-Metal for sharp edge and flexible body • Blunted ends inhibit puncture wounds • Snaps on the score for new sharp tip • Stay sharper 3X longer than traditional • Speed tip penetrates surfaces easily • Four notches for full blade extension carbon blades • Stay sharper 3X longer than traditional • 2X longer life than traditional carbon blades carbon blades U.S. Canadian Traditional Carbon Blades Description∞ Quantity Item # Item # 4-Point Snap Blades 5 Pack 1764983 1782112 10 Pack 1764984 1782113 50 Pack w/ Dispenser 1764985 1782114 100 Pack w/ Dispenser 1764986 1782115 2083100 Bi-Metal Utility Blades 5 Pack 2084100 2084100 20 Pack w/ Dispenser 2084200 2084200 50 Pack w/ Dispenser 2084300 2084300 70 Pack w/ Dispenser 2084350 2084350 Large Carbon Hook Blades 100 Pack w/ Dispenser 2084400 2084400 Bi-Metal Safety Blades 5 Pack 2088100 2088100 50 Pack w/ Dispenser 2088300 2088300 100 Bulk Pack 1764981 1764981 400 Bulk Pack 1764982 1764982 2087100 Traditional Carbon Blades 5 Pack 2083100 2083100 • Hooked point protects surface underneath 100 Pack w/ Dispenser 2083200 2083200 Carbon Hook Blades 5 Pack 2087100 2087100 100 Pack w/ Dispenser 2087102 2087102 (∞IRWIN Utility Blades Fit IRWIN and Most Other Utility Knives) * indicates Canadian item numbers www.irwin.com Utility Knives & Blades Utility Knives BI-METAL UTILITY BLADE ProtouchtM retractable utility knife [1] [3] 1.
    [Show full text]
  • Basic Instrument Use Course Notes: Scalpels
    Basic Instrument Use Course Notes: Scalpels Introduction to Using a Scalpel The No.10 blade, with its large, curved cutting edge, is one of the more traditional blade shapes used in Scalpels are an important tool for performing surgical veterinary surgery. It is generally used for making large approaches and tissue dissections. However, if used incisions in the skin and subcutaneous tissue, as well as incorrectly, scalpels pose a danger to both the patient cutting other soft tissues. and the surgical team. It is very important to learn how to handle a scalpel correctly, whether using it, handing The No.11 blade is an elongated, triangular blade it to someone, or changing the blade. In this module sharpened along the hypotenuse edge. It has a strong, we will discuss how to safely arm, disarm, and pass a pointed tip, making it ideal for stab incisions and scalpel, as well as how to grip a scalpel and the methods precise, short cuts in shallow, recessed areas. It is used of cutting with a scalpel blade. We will also examine in various procedures, such as the creation of incisions the types of scalpel blades and handles that are for chest tubes and drains, opening major blood vessels commonly used in veterinary practice and their surgical for catheter insertion (cut-downs), removing the mop applications. ends of torn cruciate ligaments, and for meniscectomy. Anatomy of a Scalpel Blade The No.12 blade is a small, pointed, crescent-shaped Edge blade sharpened along the inside edge of the curve. It is The edge of the scalpel blade is the sharp cutting sometimes utilized as a suture cutter.
    [Show full text]
  • Water Jet Cutting a Technology on the Rise
    Water Jet Cutting A Technology on the Rise Water Jet Cutting- A Technology on the Rise Foreword: Siberia to Iceland, from Norway to South The purpose of this brochure is to give the Africa. reader a rough overview of Waterjet Specially trained technicians are constantly Cutting. In addition to precise cutting of on duty and can help you immediately at various materials as presented, many any time. special applications i.e. medical and in the decommissioning and demolition field Service and wear parts are shipped within exist – these however being outside the 24 hours. scope of this text. For any additional Our contract-cutting department takes information, our KMT Waterjet team is care of our customers’ needs to the fullest, always available. Also, we would like to enabling us to perform test-cutting welcome you to visit our homepage procedures in order to optimize the www.kmt-waterjet.com, where you have cutting method, allowing you for the option of downloading useful files. economically and technically sound In order for you to get a better operation of your machines. understanding of KMT Waterjet Systems, The KMT Waterjet team in Bad Nauheim is we would also like to take this opportunity always available to answer your questions! to present our company. In the Autumn of 2003, KMT AB of Sweden purchased the Waterjet Cutting Division from Ingersoll-Rand. The KMT Corporation is an Internationally active corporation with over 700 employees worldwide. KMT Waterjet Systems employs 200 people. Further KMT brands include UVA, LIDKOPING, KMT Robotic Solutions, KMT Aqua-Dyne, KMT McCartney, and KMT H2O.
    [Show full text]
  • MF3288 How to Clean and Sharpen Garden Tools
    How to Hire an How Irrigationto Clean and SharpenContractor Garden Tools clean, sharp garden tool makes a big difference in roughness, or grit — extra fine, fine, and coarse. The lower Aperformance and takes less time to maintain. Hand the grit level, the coarser the stone. Coarse stones typically pruners kept in relatively good condition can be sharp- are used to regain an edge after extended use. Large whet- ened in about 10 minutes. Well-maintained tools provide stones are easier to work with, but a small stone comes in a cleaner cut, are more rust resistant, and last longer than handy when tucked into a pocket or work apron. Whet- tools that do not receive proper care. Wooden handles are stones work best for tools that have been disassembled for less likely to splinter or break with proper care. access to individual parts. The stone should be wet thor- oughly before use by soaking it in water or a lightweight Shovels and other digging tools do not have a sharp edge oil such as boiled linseed, which is made specifically for at the time of purchase. The buyer will need to add an use with whetstones. Oil lubricates the tool surface to edge for the tool to work as intended. Pruning tools are carry away grit generated during the stoning process. sharp at first but have to be cleaned and sharpened after a period of use. Blades stick when cutting surfaces become Files come in assorted sizes, shapes, cuts, and tooth config- grimy. Even a sharp blade eventually moves roughly over urations.
    [Show full text]
  • BILL ANALYSIS Civil Rights & Judiciary Committee SB 5782
    Washington State BILL House of Representatives Office of Program Research ANALYSIS Civil Rights & Judiciary Committee SB 5782 Brief Description: Concerning spring blade knives. Sponsors: Senators Zeiger, Fortunato, Takko, Padden, Palumbo and Wilson, L.. Brief Summary of Bill Removes "spring blade knife" from the list of dangerous weapons in the dangerous weapons statute, and provides that a spring blade knife is not a dangerous weapon. Amends other statutory provisions to provide that possession of a spring blade knife in certain locations, such as schools and jails, remains generally unlawful. Hearing Date: 3/22/19 Staff: Cece Clynch (786-7195). Background: State Law. Dangerous Weapons. A "spring blade knife" is a dangerous weapon under the dangerous weapons statute, which generally prohibits, and makes a gross misdemeanor: the possession of slung shots, sand clubs, metal knuckles, or spring blade knives; the furtive carrying, with intent to conceal, any dagger, dirk, pistol, or other dangerous weapon; and the use of any device for suppressing the noise of a firearm. "Spring blade knife" is defined to mean any knife, including a prototype, model, or other sample, with a blade that is automatically released by a spring mechanism or other mechanical device, or any knife having a blade which opens, or falls, or is ejected into position by the force of gravity, or by an outward, downward, or centrifugal thrust or movement. A knife that contains a spring, detent, or other mechanism designed to create a bias toward closure of the blade and that requires physical exertion applied to the blade by hand, wrist, or arm to overcome the bias toward closure to assist in opening the knife is not a spring blade knife.
    [Show full text]
  • Course 107. Hand Tool Field Maintenance
    PCTA Trail Skills College Curriculum Instructor Planning Guide Course 107. Hand Tool Field Maintenance We rely on hand tools to lop branches, dig drain dips, remove slough and berm, construct waterbars and check steps, and much more. As a result hand tools receive a great deal of wear and tear. Learn about the most common tool problems that are encountered during trail work and how to address them in the field including dull blades and loose heads. This is designed to be a 4-hour class. STUDENT SKILL OUTCOMES: WORK SITE REQUIREMENTS: • Understand the uses of common trail work tools An indoor or outdoor location that can • Be able to assess tool conditions and recognize accommodate course participants enough room unsafe tools to safely spread out into safe tool sharpening • Know how to address common tool distances. maintenance problems in the field • Be able to sharpen an Pulaski/axe and loppers KEY CONCEPTS: 1) Safety Documents and Concerns: Personal KEY TERMS: Protective Equipment (PPE), Job Hazard sharpening, rehandling, bastard file, bevel, Analysis (JHA) sheath, fastening or gerney wedge 2) Types of Hand Tools- Uses, strengths & precautions 3) Tool carrying- Sharp side down, sheathed, not TRAIL MAXIMS: over the shoulder “A dull tool is a dangerous tool.” “Use the right 4) Avoiding Breaking Tools tool for the right job.” • Understand the proper use of each tool • Use the right tool for the right job • Keep edges honed TOOLS NEEDED (PER 8 STUDENTS): 5) Common Problems in the Field 8 loppers in need of sharpening; 8 axes or • Loose heads Pulaskis in need of sharpening; 1 axe/Pulaski - Soaking method with loose head; 1 each: McLeod, shovel, hoe - fastening wedge method (Terra, Rogue, Hazel or other grubbing hoe), • Dulling reinhart, mattock, sledge; single or double Jack 6) Sharpening • Pulaskis/axes • Loppers MATERIALS NEEDED: • Difficult tools sharpen in the field- shovels, 10 handled bastard files, 5 hand tool sharpening Reinharts, mattocks, hoes gauges; 3 wedges; variety of tool sheaths BACKGROUND Good tools are essential for doing all types of trail work.
    [Show full text]
  • Rotary Drilling Bits and Drill String Tools Putting Your Safety First
    ROTARY DRILLING BITS AND DRILL STRING TOOLS PUTTING YOUR SAFETY FIRST The mining industry continues to demand even higher levels of safety and productivity. In order to meet these requirements, we work continuously to develop even safer products, and to produce comprehensive manuals enabling for safer and effective use of our products. IT’S ALL ABOUT EVERYONE’S HEALTH and hazard management systems. Workers should Helping you to ensure a safe workplace and healthy be provided with safety information, instruction and workforce is of the utmost importance to us. The training on transportation, installation, operational care wellbeing of any person coming into contact with our and disposal of drilling tools. and to produce compre- equipment is paramount. Therefore, we strive to identi- hensive manuals on the safe and effective use of our fy and assess potential risk factors that could threaten products. the health of you and your employees. DRESS RIGHT FROM HEAD TO TOE All of the products in this catalogue are designed (PPE) at all times. This is what we strongly recommend, to meet safety requirements. Those responsible for to help avoid injury: equipment and parts installation must take care to ensure that all necessary steps have been taken to - Safety helmet satisfy performance and safety requirements. This - Hearing protection includes making sure that any applicable laws, regula- - Safety glasses tions, codes and standards are followed. - Protective high visibility clothing - Respiratory protection BE AWARE OF ALL SAFETY PROCEDURES - Safety boots We ask that you start by obeying all instructions given. - Any site-specific PPE as required Never work under an unsupported roof or close to potential “pinch” areas.
    [Show full text]
  • The Razors-And-Blades Myth(S)
    University of Chicago Law School Chicago Unbound Journal Articles Faculty Scholarship 2011 The Razors-and-Blades Myth(s) Randal C. Picker Follow this and additional works at: https://chicagounbound.uchicago.edu/journal_articles Part of the Law Commons Recommended Citation Randal C. Picker, "The Razors-and-Blades Myth(s)," 78 University of Chicago Law Review 225 (2011). This Article is brought to you for free and open access by the Faculty Scholarship at Chicago Unbound. It has been accepted for inclusion in Journal Articles by an authorized administrator of Chicago Unbound. For more information, please contact [email protected]. The Razors-and-Blades Myth(s) Randal C. Pickert The razors-and-bladesstory offers a foundationalunderstanding of a key area of economics and strategy: invest in an installed base by selling the razor handles at low prices or even giving them away, then sell the razor blades at high prices to justify the prior investment. Large chunks of modern technological life-from VCRs and DVD players to video game systems like the Xbox and now e-book readers-seem to operate subject to the same dynamics of razors-and-blades. The actual history of razors-and-bladesis much richer than the standard story suggests. At the point that Gillette could most readily have played the strategy-from 1904 to 1921, during the period of the initialpatents-it did not do so. The firm under- stood to have invented razors-and-bladesas a business strategy did not play that strat- egy at the point that it was best situated to do so.
    [Show full text]
  • Cut Tile with No Water. the Precision and Versatility of a Wet Saw
    Cut Tile With No Water. The precision and versatility of a wet saw. Dry. Eliminating water from your cutting is smart: save the mess, save the hassle, save money. M-iQTS244-003-BR0217 World’s First Dry Cut Tile Saw With Integrated Dust Control No Water. No Mess. No Problem. The iQTS244™ is a 10” dry cut tile saw for professional contractors, designed to eliminate problems with cutting wet, save time, and increase your profitability on tile jobs. With fully-integrated dust collection technology, this innovative tool allows you to cut tile inside or outside with no water and no dust. Vacuum System • 92 CFM high output vacuum • Saw automatically starts vacuum • Cyclone technology tested to capture over 99.5% of dust Filter System • Three-stage filtration • Quick-Spin® filter for easy cleaning • 11 sq ft iQ Dura Bond filter Dust Containment *Patent Pending ** Stand sold separately • Empty dust tray once a day • Easy cleanup and recycling • Meets OSHA’s 2017 silica standard 888-274-7744 World’s First Dry Cut Tile Saw With Integrated Dust Control Cool To The Touch How does it cut dry without water? With our Q-Drive™ Blade with Cool Cut Technology. Through years of experience and testing, we have perfected our proprietary blade with the perfect ratio of high diamond to metal powder concentration. Our Cool Cut Technology, combined with the built-in vacuum on the iQTS244™, keeps the blade cool while cutting. While cooling, the vacuum also removes the cutting debris so the blade is not regrinding the same material, reducing friction and heat.
    [Show full text]
  • Waterjet Cutting Systems Ready to Conquer New Markets
    PRI MUS WATERJET CUTTING SYSTEMS READY TO CONQUER NEW MARKETS THE MARKET DEMANDS BIESSE ANSWERS a simple technology that matches the contin- with a range of highly customized technological uous evolution of the materials and the appli- solutions designed for dynamic companies that cation requirements and grants performance need to achieve further optimization in cutting. and control over production costs. Primus is the new waterjet system designed to meet the needs of companies seeking maxi- mum versatility. 2 PRIMUS IDEAL FOR CUTTING ANY TYPE OF MATERIAL AND FOR PERFORMING ALL COMPLEX SHAPING OPERATIONS HIGH QUALITY AND PRECISION AND OPTIMUM CUT FINISH EXCELLENT PERFORMANCE AND OPTIMISATION OF CUTTING COSTS SET-UP TIMES REDUCED TO ZERO THANKS TO THE SIMPLICITY OF THE FIXING AND SETTING SYSTEMS ADVANCED TECHNOLOGY WIDE RANGE OF RETROFITTABLE OPTIONAL DEVICES. 3 IDEAL FOR CUTTING ANY TYPE OF MATERIAL Ease of use and the ability to cut all types of materials combined with high quality and precision and optimal cut finishes make the Primus range suitable for a wide range of users. The Primus 402 can be configured with either a single or double cutting head. A technology that looks to the future. Primus can easily cut composite materials, synthetic stone, non-metallic alloys, titanium, aluminum, ceramic materials. 4 PRIMUS With special applications for variable Z-axis machining operations, this system allows three-dimensional materials to be processed using dedicated software. The Primus 202 can be configured with either a single or double cutting head. The cutting process makes use of Waterjet technology, which machines materials by means of a high-speed jet of water and abrasive (where necessary), with pressures that can reach 400 MPa.
    [Show full text]
  • Stainless Chromium Steel for Razor Blades
    Stainless chromium steel for razor blades Our integrated production, combined with R&D, ensure ongoing product development and our ability to meet customers' individual requirements. Razor blade steel Sandvik 13C26 For more than eighty years Sandvik Materials Technology has manufactured stainless strip steel.The knowledge and experience which we have gained is invested in the active and ongoing development of our products. With our own metallurgy and strip production, we control the whole production chain from steel melt to finished product, using the latest, most reliable technology. Sandvik 13C26 is a martensitic stainless Coil sizes Width chromium steel used mainly for razor Razor blade strip is wound into pancake Widths range between 5 and 26 mm blades. coils on plastic cores with an inner diameter (0.2 –1.0 inches). of 280 mm (11.0 inches).The coils can be Other dimensions and forms of supply can Forms of supply, finishes and supplied in weights between 1 and 5 kg/mm be produced to meet specific requirements. dimensions (55-280 lbs PIW) strip width, which means Razor blade steel, Sandvik 13C26, is supp- an outer diameter from about 500 to 1000 lied as cold rolled strip in coils.The tensile mm (20-40 inches). strength is 1070±100 MPa (155±14.5 ksi). The strip is supplied with a dull, very fine GRADE CHEMICAL COMPOSITION, NOMINAL, % surface, slit edges and extra accuracy on Sandvik C Si Mn P S Cr straightness. Wide strip is slit into finished Max Max sizes in special slitters with cemented carbide 13C26 0.68 0.4 0.7 0.025 0.010 13 tools, which give very high edge quality and very close width tolerances.
    [Show full text]
  • Spear PDC Drill Bits
    Spear Next-generation shale-optimized steel-body PDC drill bits Applications Features ■ Drilling curve and lateral sections in ■ Improved bullet shape promotes cuttings shale formations around bit body and into junk slots ■ Operations requiring good directional control ■ Improved blade geometry increases junk- ■ Formations known to cause bit balling and slot area to evacuate cuttings from bit face nozzle plugging ■ Shale evacuation channel moves cuttings ■ Low-hydraulic energy drilling that away from nozzles to inhibit plugging produces deep beds of cuttings ■ Hydraulic configuration cleans and cools cutters, maximizing ROP Benefits ■ Improved cutting structure with consistent ■ Maximizes ROP in curve and lateral sections toolface control ■ Combats bit balling and nozzle plugging ■ Steel construction reduces bit-body ■ Maintains drilling efficiency in low- diameter, efficiently driving cuttings to hydraulic conditions the annulus ■ Provides good directional control Design based on proven drilling performance Introduced in 2011, the Spear* shale- optimized steel-body PDC drill bit significantly reduced bit balling and cuttings that tended to pack around the blades of matrix-body bits. Characterized by its distinctive bullet shape and smaller diameter steel body, the streamlined Spear bit put more distance between the bit body and borehole. This helped increase cuttings evacuation by minimizing blade packing and nozzle plugging, allowing the bit to drill more efficiently. After more than 5,000 runs, the Spear bit's innovative capabilities have proven to increase drilling performance and lower drilling costs of curve- and long-lateral sections in unconventional shale plays. The original Spear bit was recognized among the industry's leading innovators and technological achievements at the 10 th Annual World Oil Awards.
    [Show full text]