Maltby – Tricept Drivers

0109 P. 08-79 Heads:Layout 1 12/30/08 5:08 PM Page 10

MALTBY – TRICEPT DRIVERS

MPF TRICEPT 851+ Multi-Material Technology For Longer & Straighter Drives!

TRICEPT MAGNESIUM DRIVER

TRICEPT COMPOSITE DRIVER

ASSEMBLED Add $1000 Per club for the combined head, shaft & grip prices listed in this catalog - CUSTOM BUILT to your specs. see pg. 7 for details PREMIUM CLUB KITS Add $500 Per club to the combined head, shaft & grip FORMOREINFO – CLICK prices listed in this catalog. see pg. 7 for details www.golfworks.com

10 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 1/21/09 10:06 AM Page 11

TRICEPT DRIVERS – MALTBY

DRIVERS TRICEPT MAGNESIUM MAGNESIUM DRIVER SPECIFICATIONS DRIVER Highlights: loft lie RH/ weight face face bulge vol. 460 ± 1° ± 1° LH (±3gms) angle height roll (cc) bore • Patented brazing technology cc 1 9.5° 60° rh 203 gm. square 2.128" 14" x 14" 460 .335" • Investment Cast 6-4 Titanium face and sole, 1 10.5° 60° rh 203 gm. 1° closed 2.128" 14" x 14" 460 .335" magnesium crown, stainless internal weighting DRIVER DETAILS: • Tri-material technology optimizes weight distribution Finish: Burgundy, Black COMPONENTS • Ultra thin magnesium crown absorbs vibrations, creating a Material: 6/4 Ti, Magnesium, Stainless Hosel I.D.: .335" (8.51mm) MAG DRIVER HEAD: MA0150 solid sound and feel, even on off center hits Hosel O.D. @ Top: .480" (12.30mm) • Variable face thickness design enhances ball speed Hosel Length: 2.75" (69.85mm) $ 99 ea. • Internal stainless weighting positioned low and rearward, Bore Depth: 1.50" (38.1mm) 149 Face Length: 4.689" (119.09mm) enhancing trajectory and forgiveness on off center hits DRIVER LOFT: 9.5°, 10.5° • Promotes medium to high launch, low spin shot dynamics to maximize distance • Expanded geometry and 460 cc head size Toe Face instills confidence at address and enhances MOI (Moment of Inertia) • Match with the Tricept 55 shaft for “High Speed” performance (see page 150) • Available in 9.5° (square face angle) and 10.5° (1° closed face angle), RH only • Quick-Order Pak Available – see page 80! At Address • Available March 2009

TRICEPT COMPOSITE DRIVERS COMPOSITE DRIVER SPECIFICATIONS DRIVER Highlights: loft lie RH/ weight face face bulge vol. • Investment Cast 6-4 Titanium face and sole 460 ± 1° ± 1° LH (±3gms) angle height roll (cc) bore • Ultra lightweight composite crown allows more cc 1 10° 60° rh 203 gm. .5° closed 2.128" 14" x 14" 460 .335" 1 11° 60° rh 203 gm. 1.5° closed 2.128" 14" x 14" 460 .335" weight to be positioned at the perimeter, raising MOI and enhancing forgiveness on off center hits DRIVER DETAILS: • Internal weighting positioned low and rearward for Finish: Jet BlackBlack Metallic COMPONENTS Material: 6/4 Ti, Graphite, Stainless optimum trajectory and stability Hosel I.D.: .335" (8.51mm) COMP DRIVER HEAD: MA0151 • Designed to produce higher launch, low spin shot dynamics to Hosel O.D. @ Top: .480" 12.30mm) $ 99 ea. maximize distance Hosel Length: 2.75" (69.85mm) Bore Depth: 1.50" (38.1mm) 129 • Variable face thickness designed to optimize ball speeds Face Length: 4.689" (119.09mm) DRIVER LOFT: 10°, 11° over a wider area of the face • Expanded “modern” geometry provides stability through the hitting zone resulting in straighter shots Toe Face • Composite crown dampens vibrations, creating an extremely solid sound at impact • Match with the Tricept 55 shaft for “High Speed” performance (see page 150) • Available in 10° (.5° closed face angle) and 11° (1.5° closed face angle) • Quick-Order Pak Available – see www.golfworks.com! At Address • Available March 2009 Back

Go To: www.golfworks.com — Open 24 Hours Per Day! 11 0109 P. 08-79 Heads:Layout 1 12/29/08 2:51 PM Page 12

MALTBY – KE4 DRIVERS

MPF KE4 851+ Unparalleled Custom Options For Ultimate Playability

KE4 SSF1 DRIVER

KE4V DRIVER

12 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 1/5/09 11:07 AM Page 13

KE4 DRIVERS – MALTBY

DRIVERS KE4 SSF1 DRIVER Highlights: KE4 SSF1 DRIVER SPECIFICATIONS • Four Piece Forged construction loft lie RH/ weight face face bulge vol. 460 ± 1° ± 1° LH (±3gms) angle height roll (cc) bore • 6-4 Titanium body cc 1 9.5° 59.5° rh 202 gm. square 2.375" 14" x 14" 460 .335" • Titanium face is 6-4 Ti and CNC milled to exact 1 10.5° 60° rh 202 gm. 1° closed 2.375" 14" x 14" 460 .335" specifications for “HIGH” speed performance 1 12.5° 60.5° rh 202 gm. 1.5° closed 2.375" 14" x 14" 460 .335" • “Stretched” 460cc head design maximizes perimeter DRIVER DETAILS: COMPONENTS weighting, raising MOI (resistance to twisting), for maximum Finish: Flat Black/Gloss Material: 6-4 Titanium KE4 SSF1 HEAD: MA0152 stability and forgiveness Hosel I.D.: .335" (8.51mm) • Single 6 gram stainless weight screw located at the extreme Hosel O.D. @ Top: .480" (12.3mm) $ 99 ea. back aids in locating cg low and rearward to optimize trajectory Hosel Length: 2.73" (69.34mm) 99 Bore Depth: 1.5" (38.1mm) KE4 SSF1 LOFT: 9.5°,10.5°, 12.5° • Single screw system allows head weight customization Face Length: 4.689" (119.09mm) for a variety of playing lengths and shaft weights • 3 lofts and 3 face angles offer a variety of launch and KE4 SSF1 KE4 SSF1 Face dispersion control options Toe • Crown design and unique satin crown cosmetic appeals to a wide range of players • Weight Wrench available – MA0032W

• Headcover – see page 84 KE4 SSF1 • Recommended ferrule – 60PW At Address • Quick-Order Pak Available – see page 80!

ALUMINUM STAINLESS STAINLESS TUNGSTEN TUNGSTEN TUNGSTEN TUNGSTEN MA0032W $6.99 AVAILABLE WRENCH & WEIGHTS 2 gram 4 gram 6 gram 8 gram 10 gram 12 gram 14 gram MA002G MA004G MA006G MA008G MA0010G MA0012G MA0014G $ .99 $1.50 $1.50 $2.99 $2.99 $2.99 $2.99

DRIVERS KE4 V SPECIFICATIONS KE4 V DRIVER Highlights: loft lie RH/ weight face face bulge vol. • Investment Cast from 6-4 Titanium for consistency 460 ± 1° ± 1° LH (±3gms) angle height roll (cc) bore cc 1 9.5° 58° rh 203 gm. .5° closed 2.050" 12" x 14" 460 .350" and high performance. 1 10.5° 58° rh 203 gm. .5° closed 2.050" 12" x 14" 460 .350" • Elongated head shape moves center of gravity more DRIVER DETAILS: COMPONENTS rearward for improved stability and launch. Finish: Black Metallic • The trademark KE4 “Screw-Within-A-Screw” weight Material: 6/4 Titanium KE4 V: MA0128 adjustment system provides feel customization. Hosel O.D. @ Top: .480" (12.2mm) Hosel Length: 2.630" (66.8mm) $ 99 ea. • 460cc head size and elongated head shape maximizes Bore Depth: 1.500" (38.1mm) 119 moment of inertia. Face Length: 4.77" (121.16mm) KE4 V LOFT: 9.5°, 10.5° • Comes with 4 gm weight installed, FREE wrench (MA0032W)

• Headcovers – see page 84 KE4 V KE4 V Face • Recommended ferrule – 620W Toe • Quick-Order Pak Available – see www.golfworks.com!

KE4 V At Address Match with KE4 Shafts – Page 150, For Perfect Playability!

KE4 WOOD 60 (.335 tip match with KE4 SSF1 Drivers) KE4 V (.350 tip match with KE4 V Drivers) • Ultra Lightweight lowers overall club weight which results in higher • Bend profile serves as a perfect complement to new KE4 V driver head clubhead speeds • Premium materials provide consistent performance and smooth feel • Laser wrap construction produces the most consistent wrapped graphite available • Designed for use with KE4 drivers for high performance

Go To: www.golfworks.com — Open 24 Hours Per Day! 13 0109 P. 08-79 Heads:Layout 1 12/29/08 2:53 PM Page 14

MALTBY – KE4 METAL SERIES

MPF KE4 851+ Adjustable Weighting For The Perfect Feel!

KE4 DRIVER SERIES

KE4 FAIRWAYS & HYBRIDS

14 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 1/5/09 11:10 AM Page 15

KE4 METAL SERIES – MALTBY

KE4 DRIVER SERIES Highlights: DRIVERS KE4 SPECIFICATIONS • Two-piece construction loft lie RH/ weight face face bulge vol. ± 1° ± 1° LH (±3gms) angle height roll (cc) bore • Cast body with milled forged face 450 cc 1 9.5° 56.5° rh 200 gm.* square 2.125" 10" x 12" 450 .335" • Proprietary variable face design to enhance 1 10.5° 56.5° rh 200 gm.* square 2.125" 10" x 12" 450 .335" spring effect over the entire surface of the club face. 1 13° 57.5° rh 200 gm.* 1° closed 2.125" 10" x 12" 450 .335" *200 gm. with 4 gm. weight installed The face is forged and then milled to exact tolerances. • “Screw-Within-A-Screw” weighting system allows head DRIVER DETAILS: Finish: Black w/Blue Metallic COMPONENTS weight to be reduced by 4 grams or increased by Material: 6-4 Titanium DRIVER: MA0035 10 grams. Hosel O.D. @ Top: .480" (12.2mm) Hosel Length: 2.850" (72.4mm) • Weight adjustability allows many shaft and length Bore Depth: 1.300" (33.0mm) $ 99 ea. options, without sacrificing desirable clubhead feel Face Length: 4.65" (118.11mm) 99 or swingweight. RH LOFT: 9.5°, 10.5°, 13° • Available in three lofts: 9.5°, 10.5° and 13° • 4 gram weight screw included FREE! KE4 Face Wrench • FREE weight wrench. Included • Headcovers – see page 84 • Recommended ferrule – 52PW

KE4 At Address MA0032W SCREW-WITHIN-A-SCREW WEIGHTING SYSTEM Available ALUMINUM STAINLESS STAINLESS Weights: 2 gram 4 gram 6 gram MA002G MA004G MA006G $ .99 $1.50 $1.50 TUNGSTEN TUNGSTEN TUNGSTEN TUNGSTEN 8 gram 10 gram 12 gram 14 gram MA008G MA0010G MA0012G MA0014G $2.99 $2.99 $2.99 $2.99 KE4 WOODS WEIGHT KIT: Includes Wrench & Container WEIGHTS QUANTITY CODE 2 , 4, 6, 8, 10, 12 grams 8 each MA0035SK 14 grams 6 each $99.99 FW & HYBRID SPECIFICATIONS loft lie RH/ weight face face bulge vol. ± 1° ± 1° LH (±3gms) angle height roll (cc) bore 3 14° 57.5° rh/lh 208 gm.* square 1.375" 12" x 14" 165 .335" KE4 FAIRWAY Highlights: RH/LH 5 18° 58° rh/lh 216 gm.* square 1.375" 14" x 14" 150 .335" 7 21° 58.5° rh/lh 224 gm.* square 1.375" 14" x 16" 140 .335" • “Screw-Within-A-Screw” weighting system allows head 9 24° 59° rh 230 gm.* square 1.375" 16" x 16" 135 .335" weight to be reduced by 8 grams or increased by 6 grams. 11 27° 59.5° rh 236 gm.* square 1.375" 16" x 16" 130 .335" • Consistent 1.375" face heights. H15 15° 57.5° rh 225 gm.* square 1.350" 14" x 16" 105 .370" H18 18° 58° rh/lh 231 gm.* square 1.350" 14" x 16" 105 .370" • Headcovers – see page 84 H21 21° 58.5° rh/lh 237 gm.* square 1.350" 14" x 16" 105 .370" • Classic head shapes. • Square face angles. H24 24° 59° rh/lh 243 gm.* square 1.350" 14" x 16" 105 .370" • LH availble in 3, 5, 7. • Cast 17-4 Stainless Steel. H27 27° 59.5° rh 249 gm.* square 1.350" 14" x 16" 105 .370" *weight with 8 gm. weight installed • FREE weight wrench. • Recommended ferrule – 52PW FAIRWAY DETAILS: KE4 Finish: Black w/Blue Metallicla COMPONENTS Material: 17-4 Stainless Steel Hosel O.D. @ Top: .480" (12.2mm) FAIRWAY RH: MA0036 LH: MA0036L Hosel Length: 2.125" (53.9mm) HYBRID RH: MA0037 LH: MA0037L Bore Depth: 1.40" (35.6mm) Face Length: 2.75" (69.9mm) $ 99 ea. KE4 HYBRID Highlights: RH/LH 29 • “Screw-Within-A-Screw” weighting system allows head FAIRWAY AVAILABLE: 3, 5, 7, 9, 11 weight to be reduced by 8 grams or increased by 6 grams. HYBRID LOFT: 15°, 18°, 21°, 24°, 27° • Slight hosel offset for improved alignment. • Headcovers – see page 84 • LH available in 18°, 21° & 24° loft options. Fairway Face • Cast 17-4 Stainless Steel. • FREE weight wrench. • Recommended ferrule – 52PI • Quick-Order Pak Available – see page 81! Fairway Hybrid At Address At Address

Go To: www.golfworks.com — Open 24 Hours Per Day! 15 0109 P. 08-79 Heads:Layout 1 12/29/08 2:54 PM Page 16

MALTBY – CT250 DRIVERS/FAIRWAYS

MPF CT250 851+ Maximum Forgiveness + Maximum Distance + Maximum Accuracy = Maximum Performance! CT250 MAXIMUM MOI NEUTRAL DRIVERS

CT250 MAXIMUM MOI DRAW DRIVERS

CT250 MAXIMUM MOI FAIRWAYS

FORMOREINFO – CLICK www.golfworks.com

16 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 12/29/08 2:55 PM Page 17

CT250 DRIVERS/FAIRWAYS – MALTBY

MAXIMUM MOI DRIVERS NEUTRAL SPECIFICATIONS NEUTRAL DRIVER Highlights: loft lie RH/ weight face face bulge vol. ± 1° ± 1° LH (±3gms) angle height roll (cc) bore • Expanded body design increases the Moment of 460 cc 1 9°,10°,11° 58° rh 203 gm. square 2.375" 12" x 14" 460 .350" Inertia for maximum forgiveness on off-center hits. • Visible back weighting technology keeps the center of gravity DRIVER DETAILS: low and rearward, reducing spin and optimizing trajectory for Finish: Black Metallic COMPONENTS Material: 6/4 Titanium maximum distance. Hosel I.D.: .350" (9.0mm) NEUTRAL: MA0114 • Expanded hitting area increases forgiveness and instills Hosel O.D. @ Top: .480" (12.2mm) $ 99 ea. confidence. Hosel Length: 2.940" (74.6mm) Bore Depth: 1.500" (38.1mm) 89 • Precision forged 6-4 Titanium face maximizes ball speed for Face Length: 4.70" (119.38mm) DRIVER LOFT: 9°, 10°, 11° increased distance.

• 460cc head size (max allowed by USGA). Neutral Neutral Face • Match with the CT250 50 gram shaft (pg. 150) for maximum Toe clubhead speed potential. • Available in 9˚, 10˚, and 11˚ loft options. • Headcovers – see page 84 • Recommended ferrule – 62OW Neutral • Quick-Order Pak Available – see page 80! At Address

DRAW SPECIFICATIONS loft lie RH/ weight face face bulge vol. DRAW DRIVER Highlights: DRIVERS ± 1° ± 1° LH (±3gms) angle height roll (cc) bore • Wider body design increases Moment of Inertia 1 9.5°,10.5°,12° 58.5° rh 203 gm. 1° closed 2.375" 12"x14" 460 .350" (resistance to twisting) for more forgiveness on 460 cc DRIVER DETAILS: off-center hits. Finish: Black Metallic COMPONENTS • Heel biased weighting aids in head rotation, helping to square Material: 6/4 Titanium Hosel I.D.: .350" (9.0mm) DRAW: MA0115 the clubface at impact. Hosel O.D. @ Top: .480" (12.2mm) • Low and back center of gravity location promotes higher Hosel Length: 2.940" (74.6mm) $ 99 ea. Bore Depth: 1.500" (38.1mm) 89 launch angles for optimum distance. Face Length: 4.70" (119.38mm) DRIVER LOFT: 9.5°, 10.5°, 12° • Four Piece Forged, 6-4 Titanium construction. • Match with the CT250 50 gram high performance graphite shaft (pg. 150) for higher clubhead speeds. Draw Draw Face Toe • 1˚ closed face angle at address helps reduce the slight to moderate slice ball flight. • Available in 9.5˚, 10.5˚, and 12˚ loft options. • Headcovers – see page 84 Draw • Recommended ferrule – 62OW At Address • Quick-Order Pak Available – see page 80!

FAIRWAY SPECIFICATIONS loft lie RH/ weight face face bulge vol. FAIRWAY Highlights: ± 1° ± 1° LH (±3gms) angle height roll (cc) bore • Investment cast 17-4 Stainless Steel. 3 15° 58.5° rh 210 gm. square 1.330" 14" x 14" 160 .350" 5 18° 59° rh 217 gm. square 1.330" 14" x 16" 150 .350" • High resistance to twisting on off-center shots. FAIRWAY DETAILS: • Shallower face height and thicker sole design keep actual Finish: Black Metallic COMPONENTS vertical c.g. lower, making it easier to get the ball airborne. Material: 17-4 Stainless Steel FAIRWAY: MA0116 • Wide body design and visible back weighting position the c.g. Hosel I.D.: .350" (9.0mm) Hosel O.D. @ Top: .480" (12.2mm) more rearward, further enhancing forgiveness and optimizing Hosel Length: 2.000" (50.8mm) $ 99 ea. trajectory. Bore Depth: 1.375" (34.9mm) 27 AVAILABLE: 3, 5 • Square face angle sits up behind ball, inspiring confidence. Face Length: 3.270" (83.1mm) • Available in #3 (15°˚) and #5 (18˚). Fairway Fairway Face • Headcovers – see page 84 Toe • Recommended ferrule – 62OW • Quick-Order Pak Available – see page 80!

Fairway At Address

Go To: www.golfworks.com — Open 24 Hours Per Day! 17 0109 P. 08-79 Heads:Layout 1 12/29/08 2:56 PM Page 18

CT250 PRO DRIVERS • MFH HYBRIDS

MPF CT250 851+ Modern Technology Formed Into A Classic Design Shape!

CT250 PROFESSIONAL DRIVERS

MFH Advanced Shell Technology Optimizes Shot Trajectory!

MFH HYBRIDS

18 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 1/5/09 11:11 AM Page 19

CT250 PRO DRIVERS • MFH HYBRIDS

PROFESSIONAL DRIVER Highlights: DRIVERS PROFESSIONAL SPECIFICATIONS • Forged from 6-4 high strength titanium. loft lie RH/ weight face face bulge vol. • Expanded Crown depth and face width for 460 ± 1° ± 1° LH (±3gms) angle height roll (cc) bore cc 1 8° 57° rh 203 gm. square 2.375" 10" x 12" 460 .350" an increased MOI over the original CT250. 1 9.5° 57.5° rh 203 gm. square 2.375" 10" x 12" 460 .350" • Additional back weighting enhances trajectory profile. 1 10.5° 58° rh 203 gm. square 2.375" 10" x 12" 460 .350" • 460cc maximum allowable head dimension provides DRIVER DETAILS: stability and forgiveness. Finish: Black Metallic COMPONENTS • Available in 8˚, 9.5˚, and 10.5˚ loft options. Material: 6/4 Titanium Hosel I.D.: .350" (9.0mm) PROFESSIONAL: MA0124 • .350" hosel bore Hosel O.D. @ Top: .480" (12.2mm) • Headcovers – see page 84 Hosel Length: 2.800" (73.1mm) $ 99 ea. Bore Depth: 1.500" (38.1mm) 89 • Recommended ferrule – 62OW Face Length: 4.68" (118.67mm) PROFESSIONAL LOFT: 8°, 9.5°, 10.5° • The preferred Driver of the Golfworks Design Team! • Quick-Order Pak Available – see www.golfworks.com! Professional Professional Face Toe

Pro At Address

HYBRID SPECIFICATIONS loft lie RH/ weight face face bulge vol. MFH HYBRID Highlights: ± 1° ± 1° LH (±3gms) angle height roll (cc) bore • Mid to low handicap player preferred design for replacing H1 16° 58.5° rh 224 gm. square 1.340" 14" x 16" 105 .370" the hard to hit long irons. H2 19° 59° rh 230 gm. square 1.340" 14" x 16" 105 .370" H3 22° 59.5° rh 236 gm. square 1.340" 16" x 16" 105 .370" • Longer hosel allows customization of specifications. H4 25° 60° rh 242 gm. square 1.340" 16" x 16" 105 .370" • Forged Stainless Steel construction. • Non – offset, straight hosel design promotes neutral HYBRID 2 DETAILS: Finish: Jet Black COMPONENTS ball flight. Material: 17-4 Stainless Steel MFH HYBRID: MA0125 • Advanced Shell Technology insures a low and rearward Hosel I.D.: .370" (9.4mm) Hosel O.D. @ Top: .531" (13.5mm) center of gravity location to optimize shot trajectory. Hosel Length: 2.500" (63.5mm) $ 99 ea. • Wide, radius sole of the hybrid design helps launch shots to Bore Depth: 1.500" (38.1mm) 24 the optimum trajectory, from the fairway or the rough. Face Length: 3.170" (80.6mm) HYBRID LOFT: 16°, 19°, 22°, 25° Face Height: 1.340" (34.0mm) • Available in four lofts - H1(16˚), H2(19˚), H3(22˚), H4(25°) • Headcovers available – see page 84 Hybrid Hybrid Face • Recommended ferrule – 60PI Toe • Quick-Order Pak Available – see www.golfworks.com!

Hybrid At Address

Match The MFH Hybrids With Any Model Of MCC/MFH The Best Selling Maltby Forged Iron Heads To Set Make-Up Create The Ultimate “Player’s” Set! MFH #3 MFH #4 See Page 28 & 29 For Maltby M-Series Irons

#5 Iron #6 Iron #7 Iron #8 Iron #9 Iron #P Iron

Go To: www.golfworks.com — Open 24 Hours Per Day! 19 0109 P. 08-79 Heads:Layout 1 12/29/08 2:57 PM Page 20

MALTBY – GLIDER S METAL SERIES

MPF GLIDER S 851+ Unique Design + Ultra Game Improvement = Better Scores

GLIDER S HIGH LAUNCH DRIVERS

GLIDER S STAINLESS FAIRWAYS & HYBRIDS

ASSEMBLED Add $1000 Per club for the combined head, shaft & grip prices listed in this catalog - CUSTOM BUILT to your specs. see pg. 7 for details PREMIUM CLUB KITS $ 00 FORMOREINFO – CLICK Add 5 www.golfworks.com Per club to the combined head, shaft & grip prices listed in this catalog. see pg. 7 for details

20 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 12/29/08 2:58 PM Page 21

GLIDER S METAL SERIES – MALTBY

DRIVER Highlights: DRIVERS DRIVER SPECIFICATIONS • 460cc Four Piece Forged Construction. loft lie RH/ weight face face bulge vol. • 6-4 High Strength Titanium face. 460 ± 1° ± 1° LH (±3gms) angle height roll (cc) bore cc 1 10° 58.5° rh 203 gm. 1° closed 2.319" 12" x 14" 460 .335" • Concave crown design keeps c.g. low and back. 1 13° 58.5° rh 203 gm. 1.5° closed 2.319" 12" x 14" 460 .335" • Internal design stabilizes the head at impact. DRIVER DETAILS: • Longer face length presents more face surface area. Finish: Jet Black COMPONENTS • Deeper front to back and longer toe to heel dimensions. Material: 6-4 Titanium Hosel O.D. @ Top: .480" (12.2mm) DRIVER: MA0118 • Wide, flat sole keeps c.g. low and allows easy and correct Hosel Length: 2.700" (68.6mm) set up at address. Bore Depth: 1.630" (41.4mm) $ 99 ea. Face Length: 4.860"(123.45mm) 69 • Available in 10˚ loft (11˚ effective loft) and 13˚ GLIDER S LOFT: 10°, 13° (14.5˚ effective loft). • Headcovers – see page 84 Driver Driver Face • Recommended ferrule – 52PW Toe

Driver At Address

FAIRWAY Highlights: • Manufactured from 17-4 Stainless Steel. FAIRWAY SPECIFICATIONS loft lie RH/ weight face face bulge vol. • Wider body design instills confidence at address. ± 1° ± 1° LH (±3gms) angle height roll (cc) bore • Designed using “Advanced Shell Technology” to properly 3 16° 59° rh 210 gm. .5° closed 1.333" 14" x 14" 155 .335" distribute the mass to maximize performance. FAIRWAY DETAILS: • Slightly longer face length (3.43”) increases the surface Finish: Jet Black COMPONENTS Material: 17-4 Stainless Steel hitting area and increases MOI (moment of inertia) for Hosel O.D. @ Top: .480" (12.2mm) FAIRWAY: MA0119 more forgiveness. Hosel Length: 2.270" (57.7mm) • Flat sole design keeps center of gravity low and rearward. Bore Depth: 1.500" (38.1mm) $ 99 ea. Face Length: 3.430" (87.1mm) 21 • Concave crown design moves more mass to the perimeter. AVAILABLE: 3 • Recommended ferrule – 60PW

Fairway Fairway Face Toe

Fairway At Address

HYBRID Highlights: • Manufactured from 17-4 Stainless Steel. HYBRID SPECIFICATIONS • Designed using “Advanced Shell Technology”. loft lie RH/ weight face face bulge vol. ± 1° ± 1° LH (±3gms) angle height roll (cc) bore • Slightly longer face length (3.33") increases the surface H20 20° 59.5° rh 228 gm. square 1.217" 16" x 16" 110 .370" hitting area and increases MOI (moment of inertia). H24 24° 60° rh 234 gm. square 1.217" 16" x 16" 110 .370" • Flat sole design from front to back keeps center of gravity HYBRID DETAILS: low and rearward to enhance trajectory and provide an Finish: Jet Black COMPONENTS Material: 17-4 Stainless Steel extremely solid feel. Hosel O.D. @ Top: .531" (13.5mm) HYBRID: MA0120 • Concave crown design moves more mass to the perimeter Hosel Length: 2.190" (65.6mm) to improve forgiveness. Bore Depth: 1.500" (38.1mm) $ 99 ea. Face Length: 3.330" (84.6mm) 16 • Toe to heel radius limits the contact area of the sole. GLIDER S HYBRID LOFT: 20°, 24° • Available in two lofts – H20 (20˚) and H24 (24˚) • Headcovers – see page 84 Hybrid Hybrid Face • Recommended ferrule – 60PI Toe

Hybrid At Address

Go To: www.golfworks.com — Open 24 Hours Per Day! 21 0109 P. 08-79 Heads:Layout 1 12/29/08 2:59 PM Page 22

MALTBY – TROUBLE OUT METALS

MPF TROUBLE 851+ OUT The Best Performing Utilities From Any Lie

TROUBLE OUT FAIRWAYS

TROUBLE OUT HYBRIDS

Match with Trouble Out Plus Recommended Lengths: Hybrid Shafts – Page 151, 357911 1 1 1 1 1 For Perfect Playability! Steel 42 /2" 41 /2" 40 /2" 39 /2" 38 /2" Graphite 43" 42" 41" 40" 39"

#3 Fairway #5 Fairway #7 Fairway #9 Fairway #11 Fairway Toe Toe Toe Toe Toe

22 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 12/29/08 2:59 PM Page 23

TROUBLE OUT METALS – MALTBY

TROUBLE OUT FAIRWAY SPECIFICATIONS FAIRWAY Highlights: loft lie RH/ weight face face bulge vol. ± 1° ± 1° LH (±3gms) angle height roll (cc) bore • Tungsten sole weight and thin shell design redistributes 3 13° 55° rh 212 gm. square 1.437" 12" x 12" 175 .335" weight, putting the vertical center of gravity location low 5 17° 56° rh 222 gm. square 1.437" 12" x 14" 160 .335" for consistently solid and straight shots. 7 21° 57° rh 232 gm. square 1.337" 14" x 14" 150 .335" 9 25° 58° rh 242 gm. square 1.337" 16" x 16" 140 .335" • Sole offers 2 sharp parallel runners that allow the sole to 11 29° 59° rh 252 gm. square 1.337" 16" x 16" 140 .335" cut through any grass condition. FAIRWAY DETAILS: • Tilted sole angle design prevents digging. Finish: Black Gloss COMPONENTS Material: 17-4 Stainless/ • Increased distance from shaft’s centerline to clubhead’s Tungsten sole weight TROUBLE OUT FAIRWAY: MA0060 center of gravity increases the MOI for more Hosel I.D.: .335" (9.4mm) forgiving shots. Hosel Length: 2.200" (88.0mm) $ 99 ea. Bore Depth: 1.500" (38.1mm) 39 • Unique, low-resistance design will not hang up in the grass Face Length: 3.000" (76.2mm) AVAILABLE: 3, 5, 7, 9, 11 on takeaway. Bounce: #3-2°,#5-3°,#7-4°,#9-5°,#11-6° • Match with Trouble Out wood shaft – see page 151 • Headcovers available – see page 85 Fairway Face • Quick-Order Pak Available – see page 80!

Fairway At Address

TROUBLE OUT HYBRID SPECIFICATIONS HYBRID Highlights: loft lie RH/ weight face face bulge vol. ± 1° ± 1° LH (±3gms) angle height roll bounce (cc) bore • Trouble Out Sole Technology in a Hybrid design. H2 20° 59° rh 232 gm. square 1.375" 14" x 16" 3° 115 .370" • Hybrid design with the TO sole is much easier to get airborne H3 25° 59.5° rh 239 gm. square 1.375" 14" x 16" 4° 115 .370" than long irons, from any lie. H4 30° 60° rh 246 gm. square 1.375" 16" x 16" 5° 110 .370" H5 35° 60.5° rh 253 gm. square 1.375" 16" x 16" 6° 110 .370" • Minimum profile sole area with bounce angle controls clubhead through turf, sand and rough (non digging – HYBRID DETAILS: Finish: Black Metallic COMPONENTS non bouncing). Material: 17-4 Stainless Steel • Sharp, dual runner sole helps keep clubhead aligned to target Hosel I.D.: .370" (9.4mm) TROUBLE OUT HYBRID: MA0117 as it cuts through turf and grass. Hosel O.D. @ Top: .531" (13.5mm) Hosel Length: 2.130" (54.0mm) $ 99 ea. • Thin shell technology with majority of the head weight Bore Depth: 1.375" (34.9mm) 27 designed into the solid mass sole gives the TO hybrids an Face Length: 3.330" (84.6mm) HYBRID LOFT: 20°, 25°, 30°, 35° Face Height: 1.375" (34.9mm) extremely low center of gravity. • Available in 4 loft options - 20˚, 25˚, 30˚, 35˚. • Headcovers available – see page 85 Hybrid Face • Recommended ferrule – 60PI • Quick-Order Pak Available – see page 81!

Hybrid At Address

Recommended Lengths: Match with Trouble Out Plus Based on 80 gram graphite shaft & 50 gram grip Fairway Shafts – Page 151, H2/20° H3/25° H4/30° H5/35° For Perfect Playability! 1 3 1 40 /2" 39 /4" 39" 38 /2"

H2 20° H3 25° H4 30° H5 35° Toe Toe Toe Toe

FORMOREINFO – CLICK www.golfworks.com

Go To: www.golfworks.com — Open 24 Hours Per Day! 23 0109 P. 08-79 Heads:Layout 1 12/30/08 5:33 PM Page 26

MALTBY – TRICEPT IRONS

MPF TRICEPT 551+ Premium Looks, Premium Performance, Premium Feel!

TRICEPT F1 FORGED IRONS

MPF 701+

TRICEPT C2 CAVITY IRONS

Tricept F1 Forged Irons ASSEMBLED Feature A Forged Body & Face Add $1000 Per club for the combined head, shaft & grip prices listed in this catalog - CUSTOM BUILT to your specs. see pg. 7 for details PREMIUM CLUB KITS Add $500 Per club to the combined head, shaft & grip prices listed in this catalog. see pg. 7 for details FORMOREINFO – CLICK www.golfworks.com

26 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 12/30/08 5:34 PM Page 27

TRICEPT IRONS – MALTBY

TRICEPT F1 FORGED IRON Highlights: TRICEPT F1 FORGED SPECIFICATIONS • Bi-material construction in a “blade” profile provides loft ± 1° lie ± 1° RH/LH offset weight* (±3gms) bounce bore optimum weight distribution 3 21° 60° rh .145" 240 gm. 3° .370" 4 24° 60.5° rh .135" 247 gm. 3° .370" • Forged 1025 Carbon Steel face provides a true forged feel 5 27° 61° rh .125" 254 gm. 3° .370" • 8620 Carbon Steel body is form forged to precise 6 31° 61.5° rh .115" 261 gm. 3° .370" specifications and provides easy adjustability for custom 7 35° 62° rh .110" 268 gm. 3° .370" 8 39° 62.5° rh .110" 276 gm. 4° .370" loft and lies 9 43° 63° rh .110" 284 gm. 4° .370" • “Flow Weighted” muscle optimizes weight distribution for PW 47° 64° rh .100" 291 gm. 5° .370" each club in the set GW 51° 64° rh .100" 291 gm. 5° .370" • Carbon Steel face is CNC milled to precise thickness #5 IRON DETAILS: • CNC milled scorelines Finish: Mirror ,Satin Material: 1025 CS Face, 8620 CS Body • “Tour grind” leading edge, front to back sole camber and Hosel I.D.: .370" (9.39mm) Center of Gravity: .748" (19.00mm) Hosel O.D. @ Top: .531" (13.49mm) Moment of Intertia: 13.0575 oz-in2 optimal sole angle for each club prevents digging through Hosel Length: 2.187" (55.51mm) the impact zone Bore Depth: 1.25" (31.75mm) COMPONENTS • Progressive offset from the long irons (more) to the short Blade Length: 3.153" (80.09mm) F1 FORGED IRON: MA0153 Toe Height: 2.215" (53.96mm) irons (less) Heel Height: 1.136" (28.85mm) $ 99 ea. • Plasma welding of face to body eliminates excess weld Sole Width: .812" (20.62mm) 29 material AVAILABLE: 3-PW, GW • Two piece construction provides more perimeter weighting in the traditional blade profile Iron • Available in 3-9, PW, GW Toe • Recommended ferrule – 74PI Iron Face Cut Out View of • Available March 2009 Forged Iron

Iron At Address

TRICEPT C2 CAVITY IRON Highlights: TRICEPT C2 CAST SPECIFICATIONS • Manufactured from 17-4 double heat treated Stainless Steel loft ± 1° lie ± 1° RH/LH offset weight* (±3gms) bounce bore for forged like feel 3 20° 60° rh .200" 240 gm. 3° .370" 4 23° 60.5° rh .180" 247 gm. 3° .370" • Flow weighted back of face cavity and back of undercut 5 26° 61° rh .160" 254 gm. 3° .370" optimizes weight distribution for each club in the set 6 29° 61.5° rh .140" 261 gm. 3° .370" • Undercut cavity design places more weight to perimeter, 7 32° 62° rh .120" 268 gm. 3° .370" 8 36° 62.5° rh .110" 276 gm. 4° .370" back and low for Super Game Improvement 9 40° 63° rh .110" 284 gm. 4° .370" • Wide sole design (.900”) keeps the center of gravity low PW 44° 64° rh .100" 291 gm. 5° .370" to help get the ball airborne GW 49° 64° rh .100" 291 gm. 6° .370" • Progressive offset, with more in the long irons and less in #5 IRON DETAILS: the short irons Finish: Mirror ,Satin Material: 17-4 Stainless Steel • Traditional blade profile in a Super Game Improvement Hosel I.D.: .370" (9.39mm) Center of Gravity: .767" (19.48mm) Hosel O.D. @ Top: .531" (13.49mm) Moment of Intertia: 13.3776 oz-in2 design Hosel Length: 2.125" (53.97mm) COMPONENTS • Sole angle (bounce) and sole radius makes the Tricept C2 Bore Depth: 1.275" (32.39mm) Blade Length: 3.252" (82.59mm) C2 CAVITY IRON: MA0154 extremely turf forgiving Toe Height: 2.156" (54.76mm) • Radius leading and trailing edges of the sole prevent Heel Height: 1.156" (29.36mm) $ 99 ea. snagging on takeaway and through the impact zone Sole Width: .900" (22.86mm) 12 • Long irons can be matched with Tricept F1 Forged design AVAILABLE: 3-PW, GW to create a progressive “players” set • Available in 3-9, PW, GW Iron • Recommended ferrule – 54PI Toe • Available March 2009 Iron Face Cut Out View of Cast Iron

Iron At Address

Go To: www.golfworks.com — Open 24 Hours Per Day! 27 0109 P. 08-79 Heads:Layout 1 12/29/08 3:25 PM Page 28

MALTBY – M-SERIES IRONS

MPF M-SERIES 701+ Enhanced Designs For Superb Feel!

MPC FORGED IRONS

MCC FORGED CNC IRONS

MMB MUSCLE BACK IRONS

ASSEMBLED Add $1000 Per club for the combined head, shaft & grip prices listed in this catalog - CUSTOM BUILT to your specs. see pg. 7 for details PREMIUM CLUB KITS Add $500 Per club to the combined head, shaft & grip prices listed in this catalog. see pg. 7 for details MTF TRUE FORGED IRONS FORMOREINFO – CLICK www.golfworks.com 28 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 12/29/08 3:25 PM Page 29

M-SERIES IRONS – MALTBY

MPC FORGED IRON Highlights: MPCSPECIFICATIONS • Form Forged from 8620 Carbon Steel. GROOVES loft ± 1° lie ± 1° RH/LH offset weight* (±3gms) bounce bore • Undercut cavity design and slightly wider sole. 3 21° 60° rh .145" 240 gm. 3° .370" 4 24° 60.5° rh .135" 247 gm. 3° .370" • Slight progressive off-set 5 27° 61° rh .125" 254 gm. 3° .370" • “Flow” weighting for optimum performance in each head. 6 31° 61.5° rh .115" 261 gm. 3° .370" • Classic blade profile appeals to tradionalists 7 35° 62° rh .110" 268 gm. 3° .370" 8 39° 62.5° rh .110" 276 gm. 3° .370" • Recommended ferrule – 74PI 9 43° 63° rh .110" 284 gm. 3° .370" Iron PW 47° 64° rh .100" 291 gm. 5° .370" Toe GW 51° 64° rh .100" 291 gm. 5° .370" #5 IRON DETAILS: COMPONENTS Iron Face Finish: Mirror Polish Material: 8620 Carbon Steel MPC: MA0123 Blade Length: 3.153" (80.1mm) Sole Width: .812" (20.6mm) $ 99 ea. Center of Gravity: .748" (19.0mm) 2 22 Moment of Intertia: 12.3368 oz-in AVAILABLE: 3-PW, GW Iron At Address MCCSPECIFICATIONS MCC FORGED CNC IRON Highlights: loft ± 1° lie ± 1° RH/LH offset weight* (±3gms) bounce bore 3 21° 59.5° rh .100" 240 gm. 3° universal • True forged from a billet of 1035 Carbon Steel. GROOVES 4 24° 60° rh .100" 247 gm. 3° universal • Cavity design CNC milled for precise c.g. location. 5 27° 60.5° rh .100" 254 gm. 3° universal • Traditional blade profile. 6 31° 61° rh .100" 261 gm. 3° universal • Recommended ferrule – 74PI 7 35° 61.5° rh .100" 267 gm. 3° universal 8 39° 62° rh .100" 276 gm. 3° universal Iron 9 43° 62.5° rh .100" 284 gm. 3° universal Toe PW 47° 63° rh .100" 291 gm. 5° universa GW 51° 63° rh .100" 291 gm. 5° universal Iron Face #5 IRON DETAILS: COMPONENTS Finish: Mirror Polish Nickel Chrome Material: 1035 Carbon Steel MCC: MA0063 Blade Length: 3.103" (78.8mm) Sole Width: .781" (19.8mm) $ 99 ea. Iron At Center of Gravity: .685" (17.4mm) 2 29 Address Moment of Intertia: 12.0003" oz-in AVAILABLE: 3-PW, GW

MMB MUSCLE BACK IRON Highlights: MMBSPECIFICATIONS • Form forged to precise specifications. loft ± 1° lie ± 1° RH/LH offset weight* (±3gms) bounce bore • 8620 Carbon Steel for soft feel and adjustability. 3 21° 60° rh .120" 240 gm. 3° universal GROOVES • Progressive “weight relief pocket”, inverted muscle and 4 24° 60.5° rh .120" 247 gm. 3° universal 5 27° 61° rh .120" 254 gm. 3° universal shorter hosel allow for correct c.g. location. 6 31° 61.5° rh .120" 261 gm. 3° universal • Recommended ferrule – 74PI 7 35° 62° rh .110" 268 gm. 3° universal Iron 8 39° 62.5° rh .110" 276 gm. 3° universal Toe 9 43° 63° rh .110" 284 gm. 3° universal PW 47° 64° rh .100" 291 gm. 4° universal Iron Face GW 51° 64° rh .100" 291 gm. 5° universal #5 IRON DETAILS: COMPONENTS Finish: Mirror Polish/Bead Blast Material: 8620 Carbon Steel MMB: MA0062 Blade Length: 3.153" (80.1mm) Sole Width: .781" (19.8mm) $ 99 ea. Iron At Center of Gravity: .729" (18.5mm) Address 22 Moment of Intertia: 12.476" oz-in2 AVAILABLE: 3-PW, GW MTF TRUE FORGED IRON Highlights: MTFSPECIFICATIONS • Five-step true forging process provides unparalled GROOVES loft ± 1° lie ± 1° RH/LH offset weight* (±3gms) bounce bore quality. 3 21° 59.5° rh .100" 240 gm. 3° universal • 1035 Carbon Steel provides a soft feel and adjustability. 4 24° 60° rh .100" 247 gm. 3° universal • Cavity back design concentrates weight around the 5 27° 60.5° rh .100" 254 gm. 3° universal perimeter and low. 6 31° 61° rh .100" 261 gm. 3° universal 7 35° 61.5° rh .100" 268 gm. 3° universal • Recommended ferrule – 74PI 8 39° 62° rh .100" 276 gm. 3° universal Iron 9 43° 62.5° rh .100" 285 gm. 3° universal Toe PW 47° 63° rh .100" 291 gm. 5° universal GW 51° 63° rh .100" 291 gm. 5° universal Iron Face #5 IRON DETAILS: COMPONENTS Finish: Polish Nickel Chrome Material:1035 Carbon Steel MTF: MA0065 Blade Length: 3.103" (78.9mm) Sole Width: .781" (19.8mm) $ 99 ea. Center of Gravity: .675" (17.1mm) Iron At 24 Address Moment of Intertia: 12.529" oz-in2 AVAILABLE: 3-PW, GW

Go To: www.golfworks.com — Open 24 Hours Per Day! 29 0109 P. 08-79 Heads:Layout 1 12/29/08 3:26 PM Page 30

MALTBY – KE4 IRONS

MPF KE4 851+ Maximum Playability With Adjustable Weights!

KE4 ADJUSTABLE WEIGHT IRONS

KE4 V IRONS

KE4 TOUR ADJUSTABLE WEIGHT IRONS ASSEMBLED Add $1000 Per club for the combined head, shaft & grip prices listed in this catalog - CUSTOM BUILT to your specs. see pg. 7 for details PREMIUM CLUB KITS Add $500 Per club to the combined head, shaft & grip prices listed in this catalog. see pg. 7 for details FORMOREINFO – CLICK www.golfworks.com See Page 13 for additional KE4 weight screws.

30 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 12/29/08 3:28 PM Page 31

KE4 IRONS – MALTBY

KE4 ADJUSTABLE WEIGHT RH/LH KE4 SPECIFICATIONS IRON Highlights: GROOVES loft ± 1° lie ± 1° RH/LH offset weight* (±3gms) bounce bore • Progressive off-set in the 3 thru 7 iron, with a constant 3 21° 60° rh/lh .200" 240 gm.* 3° .370" 4 24° 60.5° rh/lh .180" 247 gm.* 3° .370" offset in the 8 thru the SW. 5 27° 61° rh/lh .160" 254 gm.* 3° .370" • 3° of bounce in the 3 through 9 iron. 6 31° 61.5° rh/lh .140" 261 gm.* 3° .370" • 4° of bounce in the PW, GW and 10° in the SW . 7 35° 62° rh/lh .120" 268 gm.* 3° .370" 8 39° 62.5° rh/lh .100" 276 gm.* 3° .370" • Weight adjustable with 2, 4, 6 and 8 gram screw weights. 9 43° 63° rh/lh .100" 284 gm.* 3° .370" • Double heat treated 431 Stainless Steel. PW 47° 63.5° rh/lh .100" 292 gm.* 4° .370" • 4 gram factory installed heel & toe weights. GW 51° 64° rh/lh .100" 292 gm.* 4° .370" • Free wrench w/set (8) purchase MA0032W $6.95 SW 55° 64° rh/lh .100" 298 gm.* 10° .370" *weight with 4 gm. installed in toe and 4 gm installed in heel. • Recommended ferrule – 52PI #5 IRON DETAILS: • Quick-Order Pak Available – see page 81! Finish: Mirror Polish/Satin Toe Material: 431 Stainless Steel Hosel I.D.: .370" (9.4mm) Heel Height: .812" (20.6mm) Iron Hosel O.D. @ Top: .531" (13.5mm) Sole Width: .830" (21.1mm) Toe Bore Depth: 1.188" (30.2mm) Center of Gravity: .635" (16.12mm) Blade Length: 3.243" (82.4mm) Hosel Length: 1.875" (47.6mm) Iron Face Toe Height: 2.218" (56.3mm) Moment of Intertia: 12.5633" oz-in2 COMPONENTS RH: MA0022 LH: MA0022L RH: MA0032 LH: MA0032L

Iron At $ 99 ea. $ 99 ea. Address 13 10 W/INSTALLED WTS: 3-PW, GW, SW W/O INSTALLED WTS: 3-PW, GW, SW

KE4 V IRON Highlights: KE4 V SPECIFICATIONS • Undercut Cavity and heel / toe weighting. GROOVES loft ± 1° lie ± 1° RH/LH offset weight* (±3gms) bounce bore • Weight adjustable with 2, 4, 6, 8, 12 or 14 gram 4 23° 60.5° rh .180" 247 gm.* 3° .370" weights to fine tune the feel for any golfer. 5 26° 61° rh .160" 254 gm.* 3° .370" 6 30° 61.5° rh .140" 261 gm.* 3° .370" • Unique Polymer insert dampens vibrations during contact. 7 34° 62° rh .120" 268 gm.* 3° .370" • Progressive off-set in the 4 thru 7 irons, consistent off-set in 8 38° 62.5° rh .100" 276 gm.* 3° .370" the 8 thru GW. 9 42° 63° rh .100" 284 gm.* 3° .370" PW 46° 63.5° rh .100" 292 gm.* 4° .370" • Manufactured from double heat treated 431 Stainless Steel. GW 50° 64° rh .100" 292 gm.* 4° .370" • Recommended ferrule 52PI *weight with 4 gm. installed in toe and 4 gm installed in heel. • Free wrench w/set (8) purchase MA0032W $6.95 #5 IRON DETAILS: • Quick-Order Pak Available – see page 81! Finish: Mirror Polish/Satin Toe Material: 431 Stainless Steel Hosel I.D.: .370" (9.4mm) Center of Gravity: .720" (18.28mm) Iron Hosel O.D. @ Top: .531" (13.5mm) Moment of Intertia: 12.8354 oz-in2 Toe Hosel Length: 1.850" (47.0mm) Bore Depth: 1.188" (30.2mm) COMPONENTS Iron Face Blade Length: 3.243" (82.4mm) KE4 V: MA0127 Toe Height: 2.187" (55.5mm) Heel Height: .812" (20.6mm) $ 99 ea. Sole Width: 1.00" (25.4mm) 17 W/INSTALLED WTS: 4-PW, GW Iron At Address

KE4 TOUR SPECIFICATIONS loft ± 1° lie ± 1° RH/LH offset weight* (±3gms) bounce bore KE4 ADJUSTABLE WEIGHT 3 21° 60° rh .145" 240 gm.* 2° .370" TOUR IRON Highlights: 4 24° 60.5° rh .135" 247 gm.* 2° .370" • Progressive offset from 1.45" in the 3 iron to .100" GROOVES 5 27° 61° rh .125" 254 gm.* 3° .370" in the wedges 6 31° 61.5° rh .115" 261 gm.* 3° .370" 7 35° 62° rh .110" 268 gm.* 3° .370" • Weight adjustable with 2, 4, 6 and 8 gram screw weights. 8 39° 62.5° rh .110" 276 gm.* 3° .370" • Manufactured from 431 double heat treated Stainless Steel. 9 43° 63° rh .110" 284 gm.* 3° .370" • Recommended ferrule 52PI PW 47° 64° rh .100" 292 gm.* 4° .370" GW 51° 64° rh .100" 292 gm.* 4° .370" • Free wrench w/set (8) purchase MA0032W $6.95 *weight with 4 gm. installed in toe and 4 gm installed in heel. • Loft and lie adjustable for additional customization #5 IRON DETAILS: Finish: Black Chrome Polish Material: 431 Stainless Steel Iron Toe Hosel I.D.: .370" (9.4mm) Center of Gravity: .712" (18.1mm) Hosel O.D. @ Top: .538" (13.5mm) Moment of Intertia: 11.936 oz-in2 Hosel Length: 1.850" (46.9mm) Iron Face Bore Depth: 1.188" (30.2mm) COMPONENTS Blade Length: 3.188" (80.9mm) KE4 TOUR: MA0066 Toe Height: 2.187" (55.6mm) Heel Height: .812" (20.6mm) $ 99 ea. Sole Width: .800" (20.3mm) 16 Iron At W/INSTALLED WTS: 3-PW, GW Address

Go To: www.golfworks.com — Open 24 Hours Per Day! 31 0109 P. 08-79 Heads:Layout 1 12/30/08 5:17 PM Page 34

MALTBY – GLIDER IRON SERIES

MPF GLIDER 851+ Ultimate Game Improvement Designs

GLIDER T IRONS

GLIDER TL IRONS

GLIDER TL HYBRIDS

GLIDER S ULTRA HIGH MOI IRONS

FORMOREINFO – CLICK www.golfworks.com

34 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 1/5/09 11:19 AM Page 35

GLIDER IRON SERIES – MALTBY

GLIDER T IRON Highlights: GLIDERTIRONSPECIFICATIONS • Transitional sole widths (wider in the long irons to narrower loft ± 1° lie ± 1° RH/LH offset weight* (±3gms) bounce bore in the mid and short irons) provides optimum trajectory and 3 18° 61° rh .312" 240 gm. 1° .370" 4 22° 61.5° rh .281" 247 gm. 1.5° .370" distance control throughout the set. 5 26° 62° rh .250" 254 gm. 2° .370" • Short hosel design and large back cavity area allow more 6 30° 62.5° rh .218" 261 gm. 2.5° .370" weight to be placed in perimeter for maximum forgiveness 7 34° 63° rh .187" 268 gm. 3° .370" 8 38° 63.5° rh .156" 276 gm. 3.5° .370" • Progressive offset design, with more in the long irons, helps 9 42° 64° rh .125" 284 gm. 4° .370" square the blade at impact PW 46° 64.5° rh .125" 292 gm. 5° .370" • Manufactured from 431 Stainless Steel GW 51° 64.5° rh .125" 295 gm. 5° .370" • Available in 3 – 9, PW, GW #5 IRON DETAILS: Iron Toe • Recommended ferrule – 60PI Finish: Mirror Polish Material: 431 Stainless Steel Hosel I.D.: .370" (9.4mm) Moment of Intertia: 12.5262oz-in2 Hosel O.D. @ Top: .531" (13.49mm) Iron Face Hosel Length: 1.625" (41.27mm) COMPONENTS Bore Depth: 1.125" (28.58mm) Blade Length: 3.330" (84.58mm) GLIDER T IRON: MA0162 Toe Height: 1.925" (48.89mm) Heel Height: .968" (24.59mm) $ 99 ea. Iron At Sole Width: 1.50" (38.10mm) 12 Address Center of Gravity: .584" (14.83mm) AVAILABLE: 3-PW, GW

GLIDER TL IRON & HYBRID Highlights: • Shallow blade profile combined with wider sole keeps cg GLIDER TL IRON & HYBRID SPECIFICATIONS low and rearward, making this design extremely effective loft ± 1° lie ± 1° RH/LH offset weight* (±3gms) bounce bore for sweeping type swing arcs H3 22° 59.5° rh 0" 231 gm. – .370" H4 26° 60.5° rh 0" 245 gm. – .370" • Short hosel design and large cavity allows more weight to 5 30° 61.5° rh .250" 256 gm. 2° .370" be placed in the perimeter for forgiveness on off center hits 6 34° 62° rh .218" 263 gm. 2.5° .370" • 4° consistent loft progressions in 5 thru PW 7 38° 62.5° rh .187" 270 gm. 3° .370" 8 42° 63° rh .156" 278 gm. 3.5° .370" • Sole designed to be extremely turf friendly 9 46° 63.5° rh .125" 286 gm. 4° .370" • Available in H3, H4, 5 – 9, PW, SW PW 50° 64° rh .125" 293 gm. 5° .370" • Recommended ferrule – 59PI SW 56° 64° rh .125" 300 gm. 8° .370" #5 IRON DETAILS: Iron H3 Toe Toe Finish: Satin, Mirror Material: 431 Stainless Steel Iron/17-4 SS Hybrid Hosel I.D.: .370" (9.4mm) Moment of Intertia: 11.9189 oz-in2 Hosel O.D. @ Top: .531" (13.49mm) Center of Gravity: .539" (13.69mm) Hosel Length: 1.625" (41.27mm) Bore Depth: 1.125" (28.58mm) Toe Height: 1.925" (48.89mm) Blade Length: 3.330" (84.58mm) Sole Width: 1.70" (43.18mm) Heel Height: .968" (24.59mm) COMPONENTS Iron At H3 At TL HYBRIDS: MA0164 TL IRONS: MA0163 Address Address $ 99 ea. $ 99 ea. Iron Face H3 Face 18 12 AVAILABLE: H3, H4 AVAILABLE: 5-PW SW

GLIDERSIRONSPECIFICATIONS loft ± 1° lie ± 1° RH/LH offset weight* (±3gms) bounce bore 3 19° 61° rh .312" 240 gm. 1° .370" GLIDER S IRON Highlights: 4 23° 61.5° rh .281" 247 gm. 1° .370" • Manufactured from 431 Stainless Steel. GROOVES 5 27° 62° rh .250" 254 gm. 1° .370" • Extremely low actual vertical center of gravity. 6 31° 62.5° rh .218" 261 gm. 1° .370" 7 35° 63° rh .187" 268 gm. 1° .370" • Wide sole design virtually eliminates fat shots. 8 39° 63.5° rh .156" 275 gm. 1° .370" • High MOI (moment of inertia) provides extreme forgiveness 9 43° 64° rh .125" 282 gm. 1° .370" on off-center hits. PW 48° 64.5° rh .125" 289 gm. 3° .370" • M – Groove design provides optimum spin. GW 52° 65° rh .125" 296 gm. 3° .370" • Sole design well suited for pitch and run shots. #5 IRON DETAILS: COMPONENTS Finish: Mirror Polish Iron • Available in 3 – 9, PW, GW Material: 431 Stainless Steel GLIDER S IRON: MA0121 Toe • Recommended ferrule – 60PI Blade Length: 3.330"(84.6mm) Sole Width: 1.687"(42.9mm) $ 99 ea. Iron Face Center of Gravity: .501"(12.7mm) 2 12 Moment of Intertia: 12.7620 oz-in AVAILABLE: 3-PW, GW

Iron At Address

Go To: www.golfworks.com — Open 24 Hours Per Day! 35 0109 P. 08-79 Heads:Layout 1 12/30/08 10:26 AM Page 38

MALTBY – LTECH METALS

MPF LTECH 851+ Designed Exclusively For Women!

LTECH DRIVERS

LTECH FAIRWAYS

LTECH DRIVER LTech Shaft Tour Velvet Grip ASSEMBLED Add $1000 Per club for the combined head, shaft & grip prices listed in this catalog - CUSTOM SAVE BUILT to your specs. see pg. 7 for details $2697 PREMIUM CLUB KITS Add $500 Per club to the combined head, shaft & grip PMA0070 prices listed in this catalog. see pg. 7 for details $ 99 64 FORMOREINFO – CLICK Separately: $91.96 www.golfworks.com

38 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 12/30/08 10:26 AM Page 39

LTECH METALS – MALTBY

DRIVER Highlights: DRIVERS DRIVER SPECIFICATIONS • Oversize 450cc Titanium Driver features a high level loft lie RH/ weight face face bulge vol. ± 1° ± 1° LH (±3gms) angle height roll (cc) bore of forgiveness. 450 cc 1 13° 56° rh 205 gm. 1° closed 2.150" 12" x 12" 450 .335" • 4 piece forged construction using high strength 1 15° 56° rh 210 gm. 1° closed 2.150" 12" x 12" 450 .335"

6-4 Titanium. DRIVER DETAILS: • Larger hitting surface and sweet spot. Finish: Champagne Metallic COMPONENTS • 1° closed face angle provides slice correction. Material: 6-4 Titanium-driver Hosel O.D. @ Top: .480" (12.2mm) DRIVER: MA0070 • Higher lofts promote optimum trajectory for slower Hosel Length: 3.400" (86.4mm) swing speeds. Bore Depth: 1.375" (34.9mm) $ 99 ea. Face Length: 4.59" (116.59mm) 59 • Sled sole keeps c.g. low and to the rear for ease getting the DRIVER LOFT: 13°, 15° ball airborne. • Matching LTech graphite shafts (pg. 151), 3 flexes available. Driver Driver Face • Recommended ferrule – 60PW Toe • Headcovers – see page 84 • Quick-Order Pak Available – see page 81!

Driver At Address

FAIRWAY SPECIFICATIONS loft lie RH/ weight face face bulge vol. FAIRWAY Highlights: ± 1° ± 1° LH (±3gms) angle height roll (cc) bore • Sled sole prevents dragging or digging through impact. 3 17° 57° rh 215 gm. 1° closed 1.350" 14" x 14" 140 .335" • Sole design positions more weight in the sole, helping 5 21° 58° rh 225 gm. 1° closed 1.300" 14" x 14" 130 .335" position the c.g. lower. 7 24° 59° rh 230 gm. 1° closed 1.250" 14" x 16" 125 .335" 9 27° 60° rh 235 gm. 1° closed 1.180" 14" x 16" 120 .335" • Shallow face design keeps c.g. lower for trajectory. FAIRWAY DETAILS: • 1° hooked face angle helps minimize or eliminate a slice. Finish: Champagne Metallic COMPONENTS • Manufactured from 17-4 stainless Material: Stainless Steel-fairway FAIRWAY: MA0071 • Available in a 3 (17°), 5 (21°), 7 (24°), 9 (27°). Hosel O.D. @ Top: .480" (12.2mm) Hosel Length: 3.400" (86.4mm) • Headcovers available – see page 84 Bore Depth: 1.375" (34.9mm) $ 99 ea. • Recommended ferrule – 60PW Face Length: 3.875" (98.4mm) 21 • Matching LTech graphite shafts (pg. 151), 3 flexes available. AVAILABLE: 3, 5, 7, 9 • Quick-Order Pak Available – see page 81! Fairway Fairway Face Toe

Fairway At Address

LTECH LTECH FAIRWAY HYBRIDS METALS 22°, 26°, 30°, 34° 3, 5, 7, 9 LTech Shaft LTech Shaft Tour Velvet Grip Tour Velvet Grip SAVE SAVE $2132 $1632

PMA0071 PMA0072 $3199 $2999 Separately: $53.31 Separately: $46.31

Go To: www.golfworks.com — Open 24 Hours Per Day! 39 0109 P. 08-79 Heads:Layout 1 12/30/08 10:27 AM Page 40

MALTBY – LTECH HYBRID & IRONS

MPF LTECH 851+ Designed Exclusively For Women!

LTECH HYBRIDS

LTECH IRONS

FORMOREINFO – CLICK www.golfworks.com

The Easiest To Play not take divots. Sure, some of the better playing women golfers Iron Head Design — take a divot, but the vast majority of women golfers do not Just Ask My Wife! take divots. At this point in time, the concept that ultimately resulted in the L-Tech line of women’s clubs was born. To make a long story In the mid 90’s I became very short, every woman’s iron design should be in the Ultra Game interested in women’s golf Improvement Category regarding the clubs. Being an avid golfer, Every woman’s iron design Maltby Playability Factor (MPF). The my wife felt that women should be in the Ultra Game extremely low center of gravity cou- Improvement range. needed additional design pled with the longer “C” Dimension GolfWorks founder, Ralph Maltby considerations simply because (horizontal center of gravity located many of her golfing friends had trouble farther from the hosel centerline) and a farther back rearward hitting irons and especially in getting the ball airborne. There was center of gravity location assures the head design to be in the also a lack of consistency in hitting acceptable shots. maximum playability category. In addition, the wider sole design is extremely turf forgiving, greatly reducing the chance of stick- Well, as the conversation continued, she said something that I had ing the club in the ground. Bottom line, this is the easiest to hit never heard before nor ever thought of. She said that women do iron head design for women.

40 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 12/30/08 10:28 AM Page 41

LTECH HYBRID & IRONS – MALTBY

HYBRID Highlights: HYBRID SPECIFICATION • Wide, radiused sled sole design allows golfers to hit down loft lie RH/ weight face face bulge vol. ± 1° ± 1° LH (±3gms) angle height roll (cc) bore without dragging or digging into the turf. H4 22° 60.5° rh 245 gm. square 1.290" 16" x 16" 120 .370" • Thickness of the sled sole design aids in keeping the c.g. H5 26° 61° rh 252 gm. square 1.310" 16" x 16" 115 .370" low, promoting a higher trajectory and a solid feel. H6 30° 61.5° rh 259 gm. square 1.310" 16" x 16" 110 .370" H7 34° 62° rh 266 gm. square 1.310" 16" x 16" 110 .370" • Longer face dimension widens effective sweet spot for forgiveness on off-center hits. HYBRID DETAILS: Finish: Champagne Metallic COMPONENTS • Offset design helps in squaring the clubface at impact. Material: 17-4 Stainless Steel • Perfect replacement for hard to hit long irons. Hosel O.D. @ Top: .540" (13.7mm) HYBRID: MA0072 Hosel Length: 2.562" (65.1mm) • Available in H4 (22°), H5 (26°), H6 (30°), H7 (34°). Bore Depth: 1.270" (32.3mm) $ 99 ea. • Match with LTech graphite shafts, .370" hosel bore. Face Length: 3.150" (77.5mm) 17 • Recommended ferrule – 60PI Face Height: 1.310" (33.3mm) HYBRID LOFT: 22°, 26°, 30°, 34° • Headcovers – see page 84 • Quick-Order Pak Available – see page 81! Fairway Fairway Face Toe

Fairway At Address

LTECH IRON Highlights: IRONSPECIFICATIONS GROOVES • Wider, four way radiused sole and shallow loft ± 1° lie ± 1° RH/LH offset weight* (±3gms) bounce bore 4 25° 61° rh .312" 254 gm. 4° .370" blade profiles. 5 29° 61.5° rh .281" 261 gm. 4° .370" • More toe/heel weighting for a higher moment of inertia. 6 33° 62° rh .250" 268 gm. 4° .370" • Longer blade lengths stabilize the clubhead and expand the 7 37° 62.5° rh .218" 275 gm. 4° .370" effective sweetspot. 8 41° 63° rh .187" 284 gm. 4° .370" 9 45° 63.5° rh .156" 295 gm. 4° .370" • Progressive off-set, helps square the blade at impact. PW 49° 64° rh .125" 304 gm. 5° .370" • Matching LTech graphite shafts (pg. 151), 3 flexes available. SW 55° 64° rh .125" 308 gm. 13° .370" • Recommended ferrule – 59PI #5 IRON DETAILS: • Quick-Order Pak Available – see page 81! Finish: Mirror Polish COMPONENTS Material: 431 Stainless Steel IRON: MA0073 Iron Blade Length: 3.400" (86.4mm) Toe Sole Width: 1.125" (28.6mm) Center of Gravity: .636" (16.2mm) $ 99 ea. 2 Iron Face Moment of Intertia: 12.827" oz-in 11 AVAILABLE: 4-PW, SW

Iron At Address

Finally, take this very forgiving and easy to hit iron head design and match it with a more flexible (“LL”), low bend point shaft at an overall club length that is not too long and you have a great playing ladies golf club that makes the game of golf so much easier to play and provides the absolute fastest way to improve.

For more information on the development of the L-Tech line of clubs, go to my website: ralphmaltby.com. Match with LTech Graphite Shafts – Page 151 L-TECH WOMEN‘S • Designed specifically for women with three distinct flexes for ultimate custom fitting: — Soft Flex (LL): For 25+ handicap players who need help getting the ball in the air — Medium Flex (L): 15-30 handicaps who need less kick — Firm Flex (A): Handicaps of 20 and below who make consistent contact Donna Maltby

Go To: www.golfworks.com — Open 24 Hours Per Day! 41 0109 P. 08-79 Heads:Layout 1 12/30/08 9:35 AM Page 44

C•E•R – 5000/5000+ DRIVERS

MPF CER 851+ True Innovation In Our Best Selling Line!

CER 5000+ DRIVERS

CER 5000 DRIVERS

FORMOREINFO – CLICK www.golfworks.com

44 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 1/5/09 11:25 AM Page 45

5000/5000+ DRIVERS – C•E•R

CER 5000+ DRIVER Highlights: DRIVERS 5000+ DRIVER SPECIFICATIONS • 460cc Wide Body, “Square” design loft lie RH/ weight face face bulge vol. ± 1° ± 1° LH (±3gms) angle height roll (cc) bore • Internal weighting at the extreme rearward 460 cc 1 9.5° 59° rh 203 gm. 1° closed 2.215" 12" x 14" 460 .335" perimeter maximizes Moment of Inertia for 1 10.5° 59° rh 203 gm. 1° closed 2.215" 12" x 14" 460 .335" ultimate stability and forgiveness on off-center hits. DRIVER DETAILS: COMPONENTS • Crown design slopes rapidly to the rear, saving volume, Finish: Black Gloss Material: 6/4 Titanium 5000+ DRIVER: CE0029 allowing for an expanded face dimension vertically and Hosel I.D.: .335" (8.51mm) horizontally. Hosel O.D. @ Top: .480" (12.30mm) $ 99 ea. • Mass and dimensional characteristics designed to Hosel Length: 2.625" (66.67mm) 69 Bore Depth: 1.500" (38.10mm) DRIVER LOFT: 10°, 11° produce high launch, low spin conditions. Face Length: 4.587"(116.50mm) • 1° closed face angle on both lofts help to square the

face at impact. 5000+ 5000+ Face • 6-4 Titanium, four piece forged construciton. Toe • Available in 9.5° loft (10.5° effective loft) and 10.5° loft (11.5° effective loft). • Match the CER ACD graphite shafts for great performance. • Headcovers – see page 85 5000+ • Recommended ferrule – 60PW At Address • Quick-Order Pak Available – see page 82!

CER 5000 DRIVER Highlights: DRIVERS 5000 DRIVER SPECIFICATIONS • 460cc Wide Body design maximizes Moment of loft lie RH/ weight face face bulge vol. Inertia for ultimate forgiveness on off-center hits. 460 ± 1° ± 1° LH (±3gms) angle height roll (cc) bore cc 1 10° 58° rh 203 gm. 1° closed 2.125" 12" x 14" 460 .335" • Laser engraved score lines 1 11.5° 58° rh 203 gm. 1° closed 2.125" 12" x 14" 460 .335" • Slightly shallower face profile and broad body design DRIVER DETAILS: keeps center of gravity low and deep, optimizing launch Finish: Black Metallic/Textured COMPONENTS angle for a variety of swing speeds. Material: 6/4 Titanium 5000 DRIVER: CE0023 Hosel I.D.: .335" (8.5mm) • Internal draw bias weighting helps close the face at impact. Hosel O.D. @ Top: .480" (12.2mm) $ 99 ea. • 1°closed face angle and offset hosel on both lofts helps to Hosel Length: 3.190" (81.0mm) Bore Depth: 1.500" (38.1mm) 69 5000 LOFT: 10°, 11.5° square the face at impact. Face Length: 4.82" (122.42mm) • Headcovers – see page 85

• Recommended ferrule – 60PW 5000 5000 Face • Quick-Order Pak Available – see page 82! Back

5000 At Address

CER5000 CER5000+ DRIVER DRIVER CER ACD 65 Shaft CER ACD 65 Shaft Lamkin Crossline Lamkin Crossline Tour Grip Tour Grip

SAVE SAVE $2197 $2197 PCE0023 PCE0029 $7999 $7999 Separately: $101.96 Separately: $101.96

Go To: www.golfworks.com — Open 24 Hours Per Day! 45 0109 P. 08-79 Heads:Layout 1 12/30/08 2:38 PM Page 46

C•E•R – 5000+ FAIRWAYS CER True Innovation In Our Best Selling Line!

CER 5000+ FAIRWAYS

FORMOREINFO – CLICK www.golfworks.com

46 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 12/30/08 2:38 PM Page 47

5000+ FAIRWAYS – C•E•R

CER 5000+ FAIRWAY Highlights: 5000+ FAIRWAY SPECIFICATIONS • Manufactured from17-4 Stanless Steel loft lie RH/ weight face face bulge vol. ± 1° ± 1° LH (±3gms) angle height roll (cc) bore • Largest volume (head size) CER fairway wood ever 3 15° 57.5° rh 208 gm. square 1.375" 12" x 14" 190 .335" developed. 5 18° 58° rh 218 gm. square 1.375" 12" x 14" 190 .335" • Higher Moment of Inertia than conventional shaped 7 21° 58.5° rh 228 gm. square 1.375" 14" x 16" 185 .335" fairway woods. FAIRWAY DETAILS: • Extreme low and rearward center of gravity aids in getting Material: Black Gloss COMPONENTS Hosel I.D.: .335" (8.51mm) the ball airborne to the optimum trajectory for each loft Hosel O.D. @ Top: .480" (12.30mm) 5000+ FAIRWAY: CE0030 • Elevated rearward sole limits surface contact through the Hosel Length: 2.00" (50.80mm) $ 99 ea. hit zone for more solid and consistent ball contact. Bore Depth: 1.375" (34.92mm) Face Length: 3.06" (77.72mm) 19 • Larger face profile instills confidence at address. AVAILABLE: 3, 5, 7 • Match with CER ACD 75 graphite shaft for great performance, at a great price! • Available in 15° 3 wood, 18° 5 wood, #3 #5 and 21° 7 wood. Toe Toe • Headcovers – see page 85 • Recommended ferrule – 60PW #3 Face • Quick-Order Pak Available – see page 82!

#3 At Address

Match with A CER Graphite Shafts – Page 151, For Perfect Playability

CER 65 ACD

CER 65 ACD • Ultra lightweight model is a good fit for players seeking more club speed • Tight manufacturing tolerance provide reliable, repeatable performance CER 75 ACD

CER 75 ACD • Slightly heavier version of CER 65 ACD • Wood shaft is a versatile design for use in drivers or fairway metal woods • Iron shaft (CE0028) is an excellent lightweight design that encourages higher ball flight CER FW70

CER FW70 • Filament Wound construction produces high levels of consistency from shaft to shaft • Engineered to perform well with the CER line of clubs • Extremely tight frequency tolerances • 3.75° torque provides stability in irons without sacrificing feel

Go To: www.golfworks.com — Open 24 Hours Per Day! 47 0109 P. 08-79 Heads:Layout 1 12/31/08 10:55 AM Page 48

C•E•R – 851+ HYBRID SET

MPF 851+ 851+ Our Best Selling Clubs Just Keep Getting Better!

ASSEMBLED CER 851+ Add $1000 HYBRID SET Per club for the combined head, shaft & grip prices listed in this catalog - CUSTOM BUILT to your specs. see pg. 7 for details PREMIUM CLUB KITS Add $500 Per club to the combined head, shaft & grip prices listed in this catalog. see pg. 7 for details

CER 851+ HYBRIDSET 3H, 4H CER FW70 Shaft 5-PW FST 115 Shaft Lamkin Crossline Tour Grip

CER HS SLIP-ON Hybrid Headcover The CER HS slip-on headcovers SAVE are designed exclusively to fit the $ 23 CER HS hybrids. Available in 39 #3 and #4 headcovers. CE0022 $7.99 PCE0018 $ 99 159 FORMOREINFO – CLICK Separately: $199.22 www.golfworks.com

48 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 12/31/08 10:56 AM Page 49

851+ HYBRID SET – C•E•R

CER 851+ HS HYBRID Highlights: HYBRID SPECIFICATIONS • Low profile, hollow, wide sole designs are much easier loft lie RH/ sole weight ± 1° ± 1° LH offset bounce width (±3gms) bore to hit. 3 20° 59° rh .220" 0° 1.60" 238 gm. .370" • Wide, thick sole design helps place more mass low which 4 23° 59.5° rh .200" 0° 1.50" 245 gm. .370" aids in getting the ball airborne, optimizing trajectory HYBRID DETAILS: COMPONENTS and distance. Finish: Satin, Black Top/Polished Sole Material: 3/4 - 17-4 Stainless Steel HYBRID: CE0018 • Offset hosel improves accuracy. Hosel I.D.: .370" (9.4mm) • Low center of gravity provides extremely solid feel. Hosel O.D. @ Top: .531" (13.5mm) $ 99 ea. • Rounded leading edge and front to back camber of the Hosel Length: 1.940" (43.3mm) 16 Bore Depth: 1.250" (31.8mm) AVAILABLE: 3, 4 wide sole prevents digging. Face Length: 3.280" (83.3mm) • High Moment of Inertia provides Face Height: 1.470" (37.4mm) forgiveness.

• Manufactured from 17-4 Stainless Steel. 3H 4H Hybrid Face • Headcovers – see page 85 Toe Toe • Recommended ferrule – 52PI • Quick-Order Pak Available – see page 82!

RECOMMENDED LENGTHS: Hybrid At Based on 80 gram graphite Address shaft & 50 gram grip 3 (20°) 40" 4 (23°) 39 1/4" GROOVES IRON SPECIFICATIONS loft lie RH/ sole weight ± 1° ± 1° LH offset bounce width (±3gms) bore 5 26° 60° rh .180" 3° 1.15" 252 gm. .370" CER 851+ HS HYBRID SET IRON 6 30° 60.5° rh .160" 3° 1.15" 259 gm. .370" Highlights: 7 34° 61° rh .140" 3° 1.15" 266 gm. .370" • 5, 6, 7 hollow design places more mass low and in the 8 38° 61.5° rh .120" 3° .880" 274 gm. .370" 9 42° 62.5° rh .100" 3° .880" 282 gm. .370" perimeter, improving trajectory and forgiveness. P 46° 63.5° rh .100" 5° .880" 290 gm. .370" • 8 thru SW undercut design optimizes mass distribution in the G 50° 64° rh .100" 5° .880" 290 gm. .370" short irons for more consistency and solid feel. S 55° 64° rh .100" 10° .880" 300 gm. .370" • 5-SW are a progressive wide sole design that are extremely #6 IRON DETAILS: Finish: Mirror Polish/Bead Blast Hosel I.D.: .370" (9.4mm) Material: 5-SW - 431 Stainless turf forgiving, preventing digging. Hosel O.D. @ Top: .531" (13.5mm) Toe Height: 2.125" (53.9mm) • Slightly longer blade length increases the moment of Hosel Length: 2.000" (50.8mm)-5i Face Length: 3.281" (83.3mm) inertia, increasing forgiveness on off-center hits. Bore Depth: 1.250" (31.2mm) Center of Gravity: .714" (18.1mm)-5i Blade Length: 3.281" (83.3mm) Moment of Intertia: 14.020 oz-in2 • Shorter hosel design lowers the center of gravity and moves more weight to the perimeter enhancing the game COMPONENTS improvement features. HOLLOW IRONS: CE0019 UNDERCUT IRONS: CE0020 • Combine with the 3 and 4 Hybrids (details above) for the $ 99 ea. $ 99 ea. ultimate complete hybrid/iron set. 10 9 • Headcovers – see page 85 AVAILABLE: 5, 6, 7 AVAILABLE: 8, 9, P, G, S • Recommended ferrule – 52PI • Quick-Order Pak Available – see page 82! Iron Face

Iron At Address

#5 #6 #7 #8 #9 P G S Toe Toe Toe Toe Toe Toe Toe Toe

Go To: www.golfworks.com — Open 24 Hours Per Day! 49 0109 P. 08-79 Heads:Layout 1 12/30/08 2:39 PM Page 50

C•E•R – 900/900 OS IRONS

MPF 900 • 900 OS 851+ Our Best Selling Clubs Just Keep Getting Better!

CER 900 IRONS

CER 900 OS IRONS

ASSEMBLED CER900 Add $1000 IRONS 3-PW Per club for the combined head, shaft & FST 115 Shaft grip prices listed in this catalog - CUSTOM Lamkin Crossline BUILT to your specs. see pg. 7 for details Tour Grip PREMIUM CLUB KITS Add $500 Per club to the combined head, shaft & grip prices listed in this catalog. see pg. 7 for details SAVE $4857

PCE0025 $ 99 FORMOREINFO – CLICK 129 www.golfworks.com Separately: $178.56

50 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 12/30/08 2:41 PM Page 51

900/900 OS IRONS – C•E•R

CER 900 IRON Highlights: RH/LH 900 SPECIFICATIONS GROOVES • Deeper undercut cavity. loft ± 1° lie ± 1° RH/LH offset weight* (±3gms) bounce bore 3 20° 60.5° rh .220" 240 gm. 3° .370" • Wide sole design keeps weight low. 4 23° 61° rh/lh .200" 247 gm. 3° .370" • Slightly longer blade length, increases the moment of inertia. 5 26° 61.5° rh/lh .180" 254 gm. 3° .370" • 3˚ bounce angle on the 3-9 irons helps prevent digging. 6 29° 62° rh/lh .160" 261 gm. 3° .370" • Thinner, radiused top line presents a classic look at address. 7 33° 62.5° rh/lh .140" 268 gm. 3° .370" 8 37° 63° rh/lh .120" 276 gm. 3° .370" • Progressive off-set in the long/mid irons improves accuracy. 9 41° 64° rh/lh .110" 284 gm. 3° .370" • Double heat treated 431 Stainless Steel for exceptional feel. PW 45° 64° rh/lh .100" 291 gm. 5° .370" • Recommended ferrule – 52PI GW 50° 64° rh/lh .100" 291 gm. 5° .370" SW 55° 65° rh .100" 299 gm. 12° .370" • Quick-Order Pak Available – see page 82! #5 IRON DETAILS: Finish: Mirror Polish/Satin COMPONENTS Iron Material: 431 Stainless Steel Toe Blade Length: 3.281" (83.3mm) RH: CE0025 LH: CE0025L Sole Width: .880" (22.4mm) Iron Face Center of Gravity: .659" (16.7mm) $ 99 ea. Moment of Intertia: 12.5445 oz-in2 11 AVAILABLE: 3-PW, GW, SW

Iron At Address

900 OS SPECIFICATIONS GROOVES loft ± 1° lie ± 1° RH/LH offset weight* (±3gms) bounce bore CER 900 0S IRON Highlights: 4 23° 61° rh .240" 247 gm. 3° .370" • Deeper undercut cavity moves center of gravity 5 26° 61.5° rh .220" 254 gm. 3° .370" lower and more rearward for higher launch angles. 6 29° 62° rh .200" 261 gm. 3° .370" 7 33° 62.5° rh .180" 268 gm. 3° .370" • Shorter hosel design means more mass in the perimeter, 8 37° 63° rh .160" 276 gm. 3° .370" increasing the MOI for more forgiveness on off-center hits. 9 41° 64° rh .140" 284 gm. 3° .370" • Progressive offsets help square the clubface in the long irons PW 45° 64° rh .120" 291 gm. 5° .370" and improves alignment in the short irons. GW 50° 64° rh .120" 291 gm. 5° .370" SW 55° 65° rh .110" 299 gm. 12° .370" • Highest Maltby Playability Factor rating of any “Oversize” #5 IRON DETAILS: iron we have ever designed. Finish: Mirror Polish/Satin COMPONENTS Material: 431 Stainless Steel • Recommended ferrule – 60PI 900 OS: CE0024 Quick-Order Pak Available – see page 82! Blade Length: 3.266" (83.0mm) • Sole Width: .900" (22.9mm) Center of Gravity: .662" (16.8mm) $ 99 ea. MomentofIntertia: 11.9215 oz-in2 11 AVAILABLE: 4-PW, GW, SW

Iron Toe CER900 OS Iron Face IRONS 4-GW FST 115 Shaft Lamkin Crossline Iron At Tour Grip Address

2.250" CER900 vs. CER900 OS Profile Comparison SAVE 2.125" $4857

PCE0024 $12999 Separately: $178.56

Go To: www.golfworks.com — Open 24 Hours Per Day! 51 0109 P. 08-79 Heads:Layout 1 12/30/08 10:11 AM Page 54

DM – PRO Ti SERIES

MPF PRO Ti 851+ Ultra Game Improvement At A GREAT Price!

NEW DM PRO Tig DRIVERS

DM PRO Ti2 ASSEMBLED Add $1000 DRIVERS Per club for the combined head, shaft & grip prices listed in this catalog - CUSTOM BUILT to your specs. see pg. 7 for details PREMIUM CLUB KITS $ 00 FORMOREINFO – CLICK Add 5 www.golfworks.com Per club to the combined head, shaft & grip prices listed in this catalog. see pg. 7 for details 54 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 12/30/08 10:12 AM Page 55

PRO Ti SERIES – DM

PRO Tig DRIVER Highlights: DRIVERS PRO Tig SPECIFICATIONS • “Stretched” Geometry technology increases MOI for loft lie RH/ weight face face bulge vol. ± 1° ± 1° LH (±3gms) angle height roll (cc) bore more stability and straighter shots. 460 cc 1 10.5° 60° rh 200 gm. square 2.135" 14" x 14" 460 .335" • Deep and low CG location provides high launch and 1 12.5° 60° rh 200 gm. 1° closed 2.135" 14" x 14" 460 .335" low spin conditions, maximizing distance DRIVER DETAILS: COMPONENTS • Four Piece Forged 6-4 Titanium construction Finish: Black Metallic Material: 6/4 Titanium DRIVER: DM0057 • Thin crown allows more discretionary weight to be placed Hosel I.D.: .335" (8.5mm) in the perimeter, further enhancing forgiveness Hosel O.D. @ Top: .495" (12.57mm) $ 99 ea. • Match with DM Light shaft for great performance and feel Hosel Length: 2.872" (72.94mm) 54 Bore Depth: 1.42" (36.06mm) DRIVER LOFT: 10°, 11° • Recommended ferrule – 60PW Face Length: 4.74" (120.39mm) • Headcover available – see page 85 • Quick-Order Pak Available – see page 83! Driver Driver Face Toe

Driver At Address

2 DRIVERS PRO Ti DRIVER Highlights: PRO Ti2 DRIVER SPECIFICATIONS • Square Geometry technology increases MOI. 460 loft lie RH/ weight face face bulge vol. • Shallower face height and broader head keeps c.g. ± 1° ± 1° LH (±3gms) angle height roll (cc) bore cc 1 10.5° 59° rh/lh 200 gm. 1° closed 2.000" 12" x 12" 460 .335" low, rearward and centered. RH/LH 1 12.5° 59° rh 200 gm. 1° closed 2.000" 12" x 12" 460 .335" • 1˚ closed face angle in both lofts aid in returning the DRIVER DETAILS: clubface to square at impact, providing accuracy . Finish: Black Metallic COMPONENTS • Match with the DM Ultra Light Graphite shaft (pg. 152). Material: 6/4 Titanium RH: DM0047 LH: DM0047L Hosel O.D. @ Top: .480" (12.2mm) • Laser engraved score lines. Hosel Length: 2.730" (69.3mm) $ 99 ea. • Recommended ferrule – 60PW Bore Depth: 1.500" (38.1mm) 54 • Headcovers – see page 85 Face Length: 4.68" (118.87mm) DRIVER LOFT: 10.5°, 12.5° • Quick-Order Pak Available – see page 83! Driver Driver Face Toe

Driver At Address Match with Distance Master Lite Graphite Shafts – Page 152, For Perfect Playability

DISTANCE MASTER LITE

DISTANCE MASTER LITE • Light and responsive with a mid/low bend point • Available for woods and irons • Laser wrap construction provides consistency from shaft to shaft

Go To: www.golfworks.com — Open 24 Hours Per Day! 55 0109 P. 08-79 Heads:Layout 1 12/31/08 4:07 PM Page 56

DM – PRO STEEL2 SERIES

MPF PRO 851+ STEEL2 Ultra Game Improvement At A GREAT Price!

DM PRO STEEL2 FAIRWAYS & HYBRIDS

Cut Out View of ASSEMBLED Under-cut Cavity Add $1000 DM PRO Per club for the combined head, shaft & 2 grip prices listed in this catalog - CUSTOM STEEL BUILT to your specs. see pg. 7 for details IRONS PREMIUM CLUB KITS Add $500 Per club to the combined head, shaft & grip prices listed in this catalog. see pg. 7 for details FORMOREINFO – CLICK www.golfworks.com

56 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 1/5/09 11:29 AM Page 57

PRO STEEL2 SERIES – DM

FAIRWAY Highlights: RH/LH FAIRWAY SPECIFICATIONS • Manufactured from 17-4 Stainless Steel. loft lie RH/ weight face face bulge vol. ± 1° ± 1° LH (±3gms) angle height roll (cc) bore • Higher Moment of Inertia (resistance to twisting) than 3 15° 59° rh/lh 205 gm. square 1.347" 12" x 14" 205 .335" conventional shaped fairway woods. 5 19° 59.5° rh/lh 210 gm. square 1.347" 14" x 14" 205 .335" • Square geometry places more mass to the perimeter and FAIRWAY DETAILS: rearward for more forgiveness on off-center hits. Finish: Black Metallic COMPONENTS Material: 17-4 Stainless Steel RH: DM0048 LH: DM0048L • Larger fairway wood head size (210cc) and larger face Hosel O.D. @ Top: .480" (12.3mm) profile inspire confidence at address. Hosel Length: 2.280" (58.0mm) $ 99 ea. • Sole design prevents snagging to insure more solid and Bore Depth: 1.500" (38.1mm) Face Length: 3.460" (34.0mm) 14 consistent contact. AVAILABLE: 3, 5 • Low and rearward c.g. location optimizes trajectory. • Headcovers – see page 85 fairway fairway Face Toe • Recommended ferrule – 60PW • Quick-Order Pak Available – see page 83!

HYBRID Highlights: Fairway • Square design enhances perimeter weighting, increasing At Address stability and forgiveness. • Inside out design philosophy (Advanced Shell Technology) insures mass is distributed properly. • Low and back c.g. location makes it easy to get the RH/LH HYBRID SPECIFICATION ball airborne. loft lie RH/ weight face face bulge vol. • Wider face length expands the visible hitting surface, ± 1° ± 1° LH (±3gms) angle height roll (cc) bore instilling confidence at address. H21 21° 59.5° rh/lh 234 gm. square 1.340" 16" x 16" 125 .370" H24 24° 60° rh/lh 240 gm. square 1.340" 16" x 16" 125 .370" • Sole designed not to drag or snag, promoting more HYBRID DETAILS: consistent, solid contact. Finish: Black Metallic COMPONENTS • Match with the Distance Master Hybrid graphite shaft Material: 17-4 Stainless Steel RH: DM0049 LH: DM0049L (pg. 152) for great performance at a great price. Hosel O.D. @ Top: .500" (12.7mm) Hosel Length: 2.590" (66.0mm) • Recommended ferrule – 60PI Bore Depth: 1.500" (38.1mm) $ 99 ea. Face Length: 3.380" (86.0mm) 14 • Headcovers – see page 85 HYBRID LOFT: 21°, 24° • Quick-Order Pak Available – see page 83! Face Height: 1.340" (34.0mm)

Hybrid Hybrid Face IRON Highlights: Toe • Manufactured from heat treated 431 Stainless Steel for great feel and adjustability • New wider sole and deeper undercut design locates cg lower and further back, making it easier to get the ball Hybrid At Address launched to the proper trajectory • Expanded cavity allows more perimeter weighting providing a high level of forgiveness on ff center hits • Four-way sole radius, combined with wider sole design prevents digging or snagging RH/LH IRONSPECIFICATIONS • Slightly longer blade length improves MOI, making loft ± 1° lie ± 1° RH/LH offset weight* (±3gms) bounce bore the design extremely stable through the hitting zone 4 23° 61° rh/lh .195" 247 gm. 3° .370" 5 26° 61.5° rh/lh .180" 254 gm. 3° .370" • Progressive offset, with more in the long irons and less in 6 30° 62° rh/lh .165" 261 gm. 3° .370" the short irons, promotes solid contact in long irons and 7 34° 62.5° rh/lh .150" 268 gm. 3° .370" accuracy in short irons 8 38° 63° rh/lh .135" 276 gm. 3° .370" 9 42° 63.5° rh/lh .120" 284 gm. 4° .370" • Available in 4 – 9, PW, GW in Right and Left hand PW 46° 64° rh/lh .120" 292 gm. 4° .370" • Recommended ferrule – 54 PI GW 50° 64° rh/lh .120" 295 gm. 5° .370" • Quick-Order Pak Available – see page 83! #5 IRON DETAILS: Finish: Mirror Polish Material: 431 Stainless Steel Hosel I.D.: .370" (9.53mm) Center of Gravity: .654" (16.61mm) Iron Hosel O.D. @ Top: .531" (13.49mm) Moment of Intertia: 14.1410 oz-in2 Toe Hosel Length: 1.900" (48.25mm) Bore Depth: 1.200" (30.48mm) COMPONENTS Iron Face Blade Length: 3.312" (84.13mm) RH: DM0060 LH: DM0060L Toe Height: 2.250" (57.15mm) Heel Height: .851" (21.61mm) $ 99 ea. Sole Width: .950" (24.13mm) 7 AVAILABLE: 4-PW, GW Iron At Address

Go To: www.golfworks.com — Open 24 Hours Per Day! 57 0109 P. 08-79 Heads:Layout 1 12/30/08 5:30 PM Page 60

MALTBY – TRICEPT WEDGES TRICEPT

TRICEPT BLACK

TRICEPT RED

TRICEPT GREEN

60 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 12/30/08 5:31 PM Page 61

TRICEPT WEDGES – MALTBY

TRICEPT BLACK Highlights: TRICEPT .900" BLACK SPECIFICATIONS • Form Forged from 1025C Carbon Steel for great feel GROOVES loft ± 1° lie ± 1° RH/ LH offset weight (±3gms) bounce bore 52 52° 64° rh .080" 308 gm. 6° .370" • Classic blade profile appeals to a broad range of golfers 54 54° 64° rh .080" 308 gm. 10° .370" • Extremely versatile from a variety of sand and turf conditions 56 56° 64° rh .080" 312 gm. 12° .370" • Tricept Black wedges have .900" sole width designed for WEDGE DETAILS: players with moderate to good short game skills Finish: QPQ Black COMPONENTS • Consistent .900" sole width design allows club face to be Material: 1025C Carbon Steel Hosel I.D: .370" (9.40mm) TRICEPT BLACK WEDGE: MA0155 rolled open while maintaining effective use of bounce Hosel O.D. @ Top: .531" (13.49mm) • CNC milled face and U grooves for optimum spin control from Hosel Length: 3.00" (76.20mm) Bore Depth: 1.375" (34.93mm) $ 99 ea. a variety of turf conditions Blade Length: 3.149" (79.98mm) 24 WEDGE LOFT: 52°, 54°, 56° • Optimum Mass Placement (OMP) provides stability and Toe Height: 2.506" (63.65mm) improved results on short shots struck towards the toe, the Heel Height: 1.01" (25.65mm) Sole Width: .900" (22.85mm) most common miss on chips and pitches • Rolled leading edge increases “effective” bounce • Slightly heavier head weights provide great feel for the TRICEPT 1.050" RED SPECIFICATIONS shorter recommended playing lengths loft ± 1° lie ± 1° RH/ LH offset weight (±3gms) bounce bore • Available in 52° loft / 6° bounce, 54° / 10°, and 56° / 12° 54 54° 64° rh .080" 308 gm. 6° .370" • Recommended ferrule – 74PI 56 56° 64° rh .080" 312 gm. 10° .370" 58 58° 64° rh .080" 308 gm. 8° .370" • Available March 2009 WEDGE DETAILS: Finish: QPQ Black Material: 1025C Carbon Steel COMPONENTS Hosel I.D.: .370" (9.40mm) TRICEPT RED WEDGE: MA0155 TRICEPT RED Highlights: Hosel O.D. @ Top: .531" (13.49mm) GROOVES • Form Forged from 1025C Carbon Steel for great feel Hosel Length: 3.00" (76.20mm) $ 99 ea. • 1.050” consistent sole width is very effective from all types Bore Depth: 1.375" (34.93mm) Blade Length: 3.149" (79.98mm) 24 WEDGE LOFT: 54°, 56°, 58° of sand (fine to coarse) and grass (short to tall) conditions Toe Height: 2.506" (63.65mm) • Classic shape, combined with a more forgiving sole design Heel Height: 1.01" (25.65mm) offers a great combination of looks and performance Sole Width: 1.050" (26.67mm) • Designed for use by players of all abilities wanting or needing more forgiveness from thicker, more challenging lies • CNC milled face and U grooves for optimum spin control from TRICEPT 1.200" GREEN SPECIFICATIONS loft ± 1° lie ± 1° RH/ LH offset weight (±3gms) bounce bore a variety of turf conditions 56 56° 64° rh .080" 312 gm. 8° .370" • Optimum Mass Placement (OMP) places more weight toward 58 58° 64° rh .080" 308 gm. 6° .370" the toe for improved results and feel on the most common 60 60° 64° rh .080" 308 gm. 6° .370" short game miss-hits WEDGE DETAILS: Finish: QPQ Black • Slightly heavier head weights provide optimum feel for the Material: 1025C Carbon Steel COMPONENTS shorter recommended playing lengths Hosel I.D: .370" (9.40mm) TRICEPT GREEN WEDGE: MA0155 • Available in 54°/6°, 56°/10°, and 58°/8° loft, bounce options Hosel O.D. @ Top: .531" (13.49mm) Hosel Length: 3.00" (76.20mm) • Recommended ferrule – 74PI Bore Depth: 1.375" (34.93mm) $ 99 ea. Blade Length: 3.149" (79.98mm) 24 • Available March 2009 WEDGE LOFT: 56°, 58°, 60° Toe Height: 2.506" (63.65mm) Heel Height: 1.01" (25.65mm) Sole Width: 1.200" (30.48mm) TRICEPT GREEN Highlights: • The most forgiving sole design in the Tricept Wedge line GROOVES • Form Forged from 1025C Carbon Steel for great feel Black Toe Red Toe Green Toe • Combines the classic looks many desire in a wedge with a highly forgiving and playable sole design • 1.200” consistent sole width is extremely effective out of all kinds of sand and turf conditions • Designed for use by all levels of players seeking a highly forgiving option in a classic design • CNC milled face and U grooves for optimum spin control from a variety of turf conditions • Combination of sole width, rolled leading edge and four-way CNC Milled sole camber virtually eliminates fat shots Wedge Face • Optimum Mass Placement (OMP) places more weight toward the toe for improved results and feel on the most common short game miss-hits • Slightly heavier head weights provide optimum feel for the shorter recommended playing lengths • Available in 56°/8°, 58°/6°, and 60°/6° loft, bounce options • Recommended ferrule – 74PI • Available March 2009 Go To: www.golfworks.com — Open 24 Hours Per Day! 61 0109 P. 08-79 Heads:Layout 1 12/30/08 3:34 PM Page 62

MALTBY – M-SERIES WEDGES M-SERIES Classic Wedge Designs For Versatility And Performance!

MILLED WEDGES

CLASSIC WEDGES

CHROME

BLACK ION

62 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 1/5/09 11:33 AM Page 63

M-SERIES WEDGES – MALTBY

MILLED WEDGE MILLED WEDGE SPECIFICATIONS Highlights: GROOVES loft ± 1° lie ± 1° RH/ LH offset weight (±3gms) bounce bore G 52° 64° rh .080" 308 gm. 4° .370" • CNC milled face and U Grooves. S 56° 64° rh .080" 310 gm. 10° .370" • U – Grooves provide maximum spin control from a variety L 60° 64° rh .080" 308 gm. 5° .370" of turf conditions. WEDGE DETAILS: • Classic shape appeals to a wide range of golfers. Finish: Satin Polish COMPONENTS • More consistent .880" sole width allows the player to Material: 304 Stainless Steel Hosel O.D. @ Top: .531" (13.5mm) MILLED WEDGE: MA0122 open the face without loosing the effective bounce. Hosel Length: 2.880" (73.2mm) • Manufactured from soft 304 Stainless Steel for great feel. Bore Depth: 1.250" (31.8mm) Blade Length: 3.140" (79.8mm) $ 99 ea. • Available in 52˚/4˚, 56˚/10˚ and 60˚/5˚ loft / bounce options. Toe Height: 1.580" (40.1mm) 16 WEDGE LOFT: 52°, 56°, 60° • Increased head weights for improved feel. Heel Height: 1.049" (26.6mm) • Recommended ferrule – 74PI Sole Width: .880" (22.4mm)

Wedge Milled Close-Up Toe

Wedge Face M-SERIES CHROME SPECIFICATIONS loft ± 1° lie ± 1° RH/ LH offset weight (±3gms) bounce bore Gap50 50° 64° rh .060" 289 gm. 4° universal Sand53 53° 64° rh .060" 294 gm. 6° universal Sand56/8 56° 64° rh .060" 298 gm. 8° universal Sand56/12 56° 64° rh .060" 298 gm. 12° universal Sand58 58° 64° rh .060" 294 gm. 8° universal Lob60/6 60° 64° rh .060" 294 gm. 6° universal Lob60/12 60° 64° rh .060" 294 gm. 12° universal

WEDGE DETAILS: CLASSIC WEDGE Finish: Mirror Polish COMPONENTS GROOVES Material: 8620 Carbon Steel Highlights: Hosel O.D. @ Top: .550" (14.0mm) CHROME WEDGE: 1037 Hosel Length: 2.825" (71.7mm) • Classic wedge styling – traditional rounded Bore Depth: 1.220" (31.0mm) top line and radiused leading edge. Blade Length: 3.173" (80.5mm) $ 99 ea. Toe Height: 1.525" (38.7mm) 22 • Form forged from 8620 Carbon Steel for great feel and WEDGE LOFT: 50°, 53°, 56°/8, Heel Height: 1.000" (25.3mm) tight manufacturing tolerances. Sole Width: .810" (20.5mm) 56°/12, 58°, 60°/6, 60°/12 • Traditional heel grind. • Offered in two finishes; Chrome and Black Ion Rust. • Chrome and Black available in: Toe Views 50° 53° 56°/8° 56°/12° 58° 60°/6° 60°/12° 50º (4º), 53º (6º), 56º (8º or 12º), 58º (8º), and 60º (6º or 12º) loft (bounce). • Universal hosel accept .355" taper and .370" parallel tip shafts offering a broader selection of shafts for custom fitting. • Recommended ferrule – 74PI

M-SERIES BLACK ION SPECIFICATIONS GROOVES loft ± 1° lie ± 1° RH/ LH offset weight (±3gms) bounce bore Gap50 50° 64° rh .060" 289 gm. 4° universal Sand53 53° 64° rh .060" 294 gm. 6° universal Chrome M-Groove Close-Up Black Ion M-Groove Close-Up Sand56/8 56° 64° rh .060" 298 gm. 8° universal Sand56/12 56° 64° rh .060" 298 gm. 12° universal Sand58 58° 64° rh .060" 294 gm. 8° universal Lob60/6 60° 64° rh .060" 294 gm. 6° universal Lob60/12 60° 64° rh .060" 294 gm. 12° universal WEDGE DETAILS: Finish: Blk. Ion Rust Material: 8620 Carbon Steel COMPONENTS Hosel O.D. @ Top: .550" (14.0mm) Chrome Wedge Face Black Ion Wedge Face Hosel Length: 2.825" (71.7mm) BLACK ION WEDGE: 1060 Bore Depth: 1.220" (31.0mm) Blade Length: 3.173" (80.5mm) $ 99 ea. Toe Height: 1.525" (38.7mm) 24 Heel Height: 1.000" (25.3mm) WEDGE LOFT: 50°, 53°, 56°/8, 56°/12, Sole Width: .810" (20.5mm) 58°, 60°/6, 60°/12

Go To: www.golfworks.com — Open 24 Hours Per Day! 63 0109 P. 08-79 Heads:Layout 1 12/30/08 6:00 PM Page 64

MALTBY – M-SERIES WEDGES M-SERIES Wide Sole Designs For Optimum Forgiveness!

M-SERIES 1.25 UC & 1.62 UC SOLE WEDGES

FORMOREINFO – CLICK www.golfworks.com

Tip#2: Tip Fitting Wedges — It is very important to have the lie of wedges fit to the A Few Important Tips golfer. If the lie angle is not set properly and the toe is up at we impact (lie angle too upright) the ball will be pulled to the left of pro Tip#1: Too many golfers simply buy a the target. Conversely, if the toe is down at impact (lie angle too the wedge here, a wedge there and never flat) the ball will be pushed to the right of the target. This toe up gol check to see if the new wedges lengths or toe down thing is one of the most important fitting variables in siz fit into their current set. Generally, the wedges because the greater the loft angle (all the wedges), the and pitching wedge should be 1/2" shorter more offline a shot can be when the lie angle is not set properly An for the golfer. red than the #9 iron in your set. “It is very important to 1 wh The gap wedge can be /2" have the lie of wedges use VP Technical Services / R&D shorter than the pitching fit the golfer.” Tip#3: Britt Lindsey wedge, but can be made the If a golfer has special problems act same length as the pitching consistently getting out of the sand con wedge, depending on the head weight and/or hitting fat and thin shots when pitching and chipping inc of the gap wedge and the players personal preference. The sand or in general is just inconsistent, select a wider sole wedge. han wedge should be 1/2" shorter than the pitching wedge. Regarding For the more accomplished player, more normal sole widths, han the 60º wedge, it can be the same length as the sand wedge, or sole radiuses, sole bounce angles and leading edge grinds 1/4" to 1/2" shorter, depending on the players preference and the will work well for the many varied shots they are capable of head weight. performing.

64 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 12/30/08 6:01 PM Page 65

M-SERIES WEDGES – MALTBY

1.25 UC WEDGE Highlights: M-SERIES 1.25" UC SPECIFICATIONS GROOVES • Extremely effective out of sand and high grass. loft ± 1° lie ± 1° RH/ LH offset weight (±3gms) bounce bore • Leading edge rolled to increase effective bounce. 1.25 UC 56° 64° rh .040" 310 gm. 8° .370" 1.25 UC 60° 64° rh .040" 308 gm. 4° .370" • 1.25" consistent sole width. • Slightly heavier head weights provide exceptional feel for 1.25 UC WEDGE DETAILS: recommended shorter playing lengths. Finish: High Polish COMPONENTS Material: 431 Stainless Steel • Club face can be rolled open up to 15° without negatively Hosel I.D.: .370" (9.4mm) 1.25 UC WEDGE: MA0049 effecting bounce in rough or fluffy sand. Hosel O.D. @ Top: .531" (13.5mm) • Available in 56° loft w/8° bounce and 60° loft w/4° bounce. Hosel Length: 2.875" (65.4mm) $ 99 ea. Bore Depth: 1.250" (31.8mm) 14 • Recommended ferrule – 74PI Blade Length: 3.200" (81.3mm) WEDGE LOFT: 56°, 60° Toe Height: 2.390" (60.7mm) Heel Height: 1.015" (25.5mm) Sole Width: 1.250" (31.8mm)

M-SERIES 1.62" UC SPECIFICATIONS GROOVES 1.62 UC WEDGE Highlights: loft ± 1° lie ± 1° RH/ LH offset weight (±3gms) bounce bore • Eliminates fat shots. 1.62UC 56° 64° rh .040" 310 gm. 8° .370" • Automatic out of sand and high grass. 1.62UC 60° 64° rh .040" 308 gm. 4° .370" • Most playable option in the M-Series line. 1.62 UC WEDGE DETAILS: • Leading edge rolled to increase effective bounce. Finish: High Polish COMPONENTS • 1.62" consistent sole width. Material: 431 Stainless Steel 1.62 UC WEDGE: MA0057 • Slightly heavier head weights provide exceptional feel for Hosel I.D.: .370" (9.4mm) Hosel O.D. @ Top: .531" (13.5mm) recommended shorter playing lengths. Hosel Length: 2.875" (65.4mm) $ 99 ea. • Combines a classic wedge blade profile with high playability Bore Depth: 1.250" (31.8mm) 14 Blade Length: 3.200" (81.3mm) WEDGE LOFT: 56°, 60° sole design. Toe Height: 2.390" (60.7mm) • Available in 56° loft w/8° bounce and 60° loft w/4° bounce. Heel Height: 1.015" (25.5mm) • High polish finish. Sole Width: 1.620" (41.5mm) • Recommended ferrule – 74PI

1.25 UC 1.62 UC Wedge Face Toe Toe

Tip#4: Grip size is another fitting variable for wedges that can improve your play. The proper grip size will help in better controlling the clubhead. For some golfers, a larger grip size will feel better and improve play. Another trick to reduce situations where the golfer uses too much hand action, causing less control of the shot, is to increase the grip size more under the right- hand (for right-hand player) or under the left- hand (for left-hand player).

Go To: www.golfworks.com — Open 24 Hours Per Day! 65 0109 P. 08-79 Heads:Layout 1 12/30/08 5:29 PM Page 66

MALTBY – SAND/LOB/PRO SLIDERS SLIDER SERIES Wide Sole Designs For Optimum Forgiveness!

SAND SLIDER

LOB SLIDER

SLIDER PRO

ASSEMBLED Add $1000 Per club for the combined head, shaft & grip prices listed in this catalog - CUSTOM BUILT to your specs. see pg. 7 for details PREMIUM CLUB KITS Add $500 Per club to the combined head, shaft & grip prices listed in this catalog. see pg. 7 for details FORMOREINFO – CLICK www.golfworks.com

66 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 12/30/08 5:30 PM Page 67

SAND/LOB/PRO SLIDERS – MALTBY

SAND SLIDER Highlights: RH/LH SAND SLIDER SPECIFICATIONS • 17-4 Stainless Steel heads have wide, GROOVES loft ± 1° lie ± 1° RH/ LH offset weight (±3gms) bounce bore 2" soles and beveled edges. Sand 56° 64° rh/lh .140" 310 gm. 4° .370" • Slightly heavier head weights provide exceptional feel. 56° SLIDER DETAILS: Finish: Satin • Moderate heel to toe radius adds stability and consistency. Material: 17-4 Stainless Steel COMPONENTS • Extremely consistent spin, trajectory and distance control. Hosel I.D.: .370" (9.4mm) SAND SLIDER • Recommended ferrule – 60PI Hosel O.D. @ Top: .531" (13.5mm) Bore Depth: 1.250" (31.8mm) RH: 1104 LH: 1104L Blade Length: 3.438" (87.3mm) Toe Height: 1.522" (38.6mm) $ 99 ea. Heel Height: .915" (23.2mm) 12 Sole Width: 2.063" (52.4mm)

LOB SLIDER Highlights: RH/LH LOB SLIDER SPECIFICATIONS • 17-4 Stainless Steel heads have wide, GROOVES loft ± 1° lie ± 1° RH/ LH offset weight (±3gms) bounce bore 2" soles and beveled edges. Lob 60° 64° rh/lh .140" 308 gm. 4° .370" • Slightly heavier head weights provide exceptional feel. 60° LOB DETAILS: Finish: Satin • Moderate heel to toe radius adds stability and consistency. Material: 17-4 Stainless Steel COMPONENTS • Extremely consistent spin, trajectory and distance control. Hosel I.D.: .370" (9.4mm) LOB SLIDER • Recommended ferrule – 60PI Hosel O.D. @ Top: .531" (13.5mm) Bore Depth: 1.250" (31.8mm) RH: 1103 LH: 1103L Blade Length: 3.438" (87.3mm) Toe Height: 1.522" (38.6mm) $ 99ea. Heel Height: .915" (23.2mm) 12 Sole Width: 2.063" (52.4mm) The Sand and Lob Sliders have become one of our greatest success stories. Initially, some golfers were skeptical about these heads, but Lob Slider Lob & Sand Slider as more and more try them, their popularity Toe Face has exploded! The feedback tells us what we already knew — THESE CLUBS WORK, and take the frustration out of the short game for many, many golfers!

SLIDER PRO Highlights: M-SERIES SLIDER PRO SPECIFICATIONS • Manufactured from 431 Stainless Steel. GROOVES loft ± 1° lie ± 1° RH/ LH offset weight (±3gms) bounce bore • Designed for those shots from 40 yards and in. Sand Pro 56° 64° rh .040" 310 gm. 10° .370" Lob Pro 60° 64° rh .040" 308 gm. 6° .370" • Prevents “fat” shots. 56° SLIDER PRO DETAILS: • Slightly heavier head weights provide exceptional feel for Finish: Mirror Polish recommended shorter playing lengths. Material: 431 Stainless Steel COMPONENTS • Sole design and beveled edges glide over sand or turf Hosel I.D.: .370" (9.4mm) Hosel O.D. @ Top: .531" (13.5mm) SLIDER PRO: MA0088 without sticking or digging. Bore Depth: 1.250" (31.8mm) • Classic blade profile combined with ultimate playability Blade Length: 3.200" (81.3mm) $ 99 ea. sole design. Toe Height: 1.638" (41.6mm) 12 Heel Height: 1.015" (25.5mm) WEDGE LOFT: 56°, 60° • Extremely consistent spin and trajectory. Sole Width: 1.625" (41.3mm) • Recommended ferrule – 60PI

Pro Toe

Pro Face

Go To: www.golfworks.com — Open 24 Hours Per Day! 67 0109 P. 08-79 Heads:Layout 1 12/31/08 5:13 PM Page 68

C•E•R – CNC MILLED & OIL SOAKED CNC & OIL SOAKED Classic Styling — Pure Performance!

CNC MILLED WEDGES

OIL SOAKED WEDGES

ASSEMBLED $ 00 CNC Add 10 MILLED Per club for the combined head, shaft & grip prices listed in this catalog - CUSTOM WEDGES BUILT to your specs. see pg. 7 for details 52°, 56°, 60° FST 115 Shaft PREMIUM CLUB KITS Lamkin Crossline Tour Grip Add $500 Per club to the combined head, shaft & grip prices listed in this catalog. see pg. 7 for details SAVE $598

PCE0032 $ 99 FORMOREINFO – CLICK 22 www.golfworks.com Separately: $28.97

68 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 12/30/08 6:03 PM Page 69

CNC MILLED & OIL SOAKED – C•E•R

CNC MILLED WEDGE CER WEDGE SPECIFICATIONS Highlights: GROOVES loft ± 1° lie ± 1° RH/ LH offset weight (±3gms) bounce bore G 52° 64° rh 0.60" 298 gm. 4° .370" • QPQ (Quench, Polish, Quench) finish produces non-glare, S 56° 64° rh 0.60" 306 gm. 12° .370" scratch resistant finish that will slowly rust over time L 60° 64° rh 0.60" 300 gm. 6° .370" • Classic wedge style - narrow top line, high rounded toe, WEDGE DETAILS: professional grind leading edge. Finish: Black QPQ COMPONENTS Material: 8620 Carbon Steel • CNC milled face and U grooves provide optimum spin Hosel I.D.: .370" (9.4mm) CNC MILLED WEDGE: CE0032 control from a variety of turf conditions. Hosel O.D. @ Top: .531" (13.5mm) • Consistent sole width grind utilizes the designed bounce, Hosel Length: 2.844" (72.2mm) $ 99 ea. Bore Depth: 1.350" (34.3mm) 18 even when the clubface is open. Blade Length: 2.890" (73.4mm) WEDGE LOFT: 52°, 56°, 60° • Precision Cast from 8620 Carbon Steel for soft feel and Toe Height: 1.551" (39.3mm) adjustability. Heel Height: .911" (23.1mm) Sole Width: .965" (24.5mm) • Loft/Bounce options include 52º (4º), 56º (12º), and 60º (6º). • Recommended ferrule – 74PI • Quick-Order Pak 52° 56° 60° U-Groove Close-Up Available – see page 82! Toe Toe Toe Wedge Face

OIL SOAKED WEDGE Highlights: RH/LH CER WEDGE SPECIFICATIONS • Precision cast 8620 Carbon Steel. GROOVES loft ± 1° lie ± 1° RH/ LH offset weight (±3gms) bounce bore G 52° 64° rh/lh 0.60" 298 gm. 4° .370" • Classic wedge styling – narrow top line, high rounded toe, S 54° 64° rh 0.60" 304 gm. 8° .370" beveled leading edge. S 56° 64° rh/lh 0.60" 306 gm. 12° .370" • U – Grooves for maximum spin. S 58° 64° rh 0.60" 304 gm. 8° .370" L 60° 64° rh/lh 0.60" 300 gm. 6° .370" • Consistent sole width grind utilizes the designed bounce, even when the club face is rolled open. WEDGE DETAILS: Finish: Oil Soaked Raw Carbon COMPONENTS • Raw finish appeals to high level players and traditionalists. Material: 8620 Carbon Steel • Oil Soaked feature protects raw finish. Hosel I.D.: .370" (9.4mm) RH: CE0021 LH: CE0021L Hosel O.D. @ Top: .531" (13.5mm) • Loft/Bounce options include: RH - 52°/4°, 54°/8°, 56°/12°, Hosel Length: 2.844" (72.2mm) $ 99 ea. 58°/8°, 60°/6° LH - 52°/4°, 56°/12°, 60°/6°. Bore Depth: 1.350" (34.3mm) 14 • Recommended ferrule – 74PI Blade Length: 2.890" (73.4mm) WEDGE LOFT: 52°, 54°, 56°, 58°, 60° Toe Height: 1.551" (39.3mm) • Quick-Order Pak Available – see page 82! Heel Height: .911" (23.1mm) Sole Width: .965" (24.5mm)

52° 54° 56° 58° 60° Toe Toe Toe Toe Toe OIL SOAKED WEDGES 52°, 54,°56°, 58°, 60° FST 115 Shaft Lamkin Crossline Tour Grip Wedge Face SAVE $598

PCE0021 $ 99 18 FORMOREINFO – CLICK Separately: $24.97 www.golfworks.com

Go To: www.golfworks.com — Open 24 Hours Per Day! 69 0109 P. 08-79 Heads:Layout 1 12/30/08 6:03 PM Page 70

DM – WEDGES & CHIPPER DISTANCE MASTER Stainless Steel Chipper And Wedges At Great Prices!

DM SHREDDER WEDGES

DM ACCUSITE CHIPPER

DM CLASSIC WEDGES ASSEMBLED Add $1000 Per club for the combined head, shaft & grip prices listed in this catalog - CUSTOM BUILT to your specs. see pg. 7 for details PREMIUM CLUB KITS Add $500 Per club to the combined head, shaft & grip FORMOREINFO – CLICK prices listed in this catalog. see pg. 7 for details www.golfworks.com

70 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 1/5/09 11:36 AM Page 71

WEDGES & CHIPPER – DM

SHREDDER WEDGE Highlights: SHREDDER WEDGE SPECIFICATIONS • Manufactured from 431 heat treated stainless GROOVES loft ± 1° lie ± 1° RH/ LH offset weight (±3gms) bounce bore steel for great feel and adjustability 58 58° 64° rh .080" 312 gm. 10° .370" • Non-conforming Square-Grooves maximize spin from all WEDGE DETAILS: Finish: Mirror Polish COMPONENTS turf and sand conditions Material: 431 Stainless Steel • 3 extra grooves displace more material, providing even Hosel I.D.: .370" (9.4mm) SHREDDER: DM0059 more spin Hosel O.D. @ Top: .531" (13.49mm) Hosel Length: 2.852" (72.44mm) $ 99 ea. • Non-conforming CNC rough milled face further Bore Depth: 1.375" 34.93mm) 14 enhances spin Blade Length: 3.117" (79.17mm) Toe Height: 1.550" (39.37mm) WEDGE LOFT: 58° • .950" consistent sole width is extremely turf friendly Heel Height: 1.034" (26.26mm) • Classic blade profile Sole Width: .950" (24.13mm) • 58° loft with 10° bounce angle provides all purpose usage from turf and sand • Recommended ferrule – 60PI 58° Milling Close-Up Wedge Face Toe

CLASSIC WEDGE Highlights: RH/LH CLASSIC WEDGE SPECIFICATIONS • Cosmetics match all the DM irons and woods. GROOVES loft ± 1° lie ± 1° RH/ LH offset weight (±3gms) bounce bore • Double heat treated 431 Stainless Steel for G 52° 64° rh/lh .115" 300 gm. 5° .370" forged feel and bendability for custom fitting. S 56° 64° rh/lh .115" 300 gm. 12° .370" • Beveled leading edge to prevent digging L 60° 64° rh/lh .115" 300 gm. 5° .370" into the turf WEDGE DETAILS: Finish: Mirror Polish COMPONENTS • Available in RH and LH. Material: 431 Stainless Steel • Loft/Bounce options of: Hosel I.D.: .370" (9.4mm) RH: DM0034 52°/5°, 56°/12° and 60°/5°. Hosel O.D. @ Top: .540" (13.7mm) LH: DM0034L Hosel Length: 2.625" (66.7mm) • USGA conforming Square – Grooves. Bore Depth: 1.375" (34.9mm) • Ample sole widths to perform well from both sand Blade Length: 3.190" (81.0mm) $ 99 ea. and turf. Toe Height: 1.542" (39.1mm) 8 Heel Height: .975" (24.8mm) WEDGE LOFT: 52°, 56°, 60° • Recommended ferrule – 60PI Sole Width: .890" (22.6mm)

52° Toe 56° Toe 60° Toe Wedge Face ACCUSITE CHIPPER Highlights: • Heavier head weight provides better feel and control. • Recommended shorter playing length eliminates the need to “choke up” and allows for more consistent contact. • 1.8" wide sole glides across the turf and virtually eliminates the stubbed chip. • 48˚ loft lifts the ball over the fringe and onto the green. • Radius leading and trailing edge grind and front to back sole camber prevents snagging. • Offset hosel promotes a hand forward position at impact for crisper contact. • Recommended ferrule – 60PI ACCUSITE CHIPPER SPECIFICATIONS loft ± 1° lie ± 1° RH/ LH offset weight (±3gms) bounce bore Chipper 48° 68° rh .270" 320 gm. 3° .370" Chipper Chipper Toe Face CHIPPER DETAILS: Finish: Mirror Polish COMPONENTS Material: 431 Stainless Steel Hosel I.D.: .370" (9.4mm) CHIPPER: DM0054 Hosel O.D. @ Top: .540" (13.7mm) Hosel Length: 3.750"(95.3mm) $ 99 ea. Bore Depth: 1.290"(32.8mm) 9 Chipper At Blade Length: 3.800"(96.7mm) Address Sole Width: 1.800"(45.7mm)

Go To: www.golfworks.com — Open 24 Hours Per Day! 71 0109 P. 08-79 Heads:Layout 1 12/30/08 7:15 PM Page 72

MALTBY – 304 STAINLESS PUTTERS

MALTBY MALTBY 304 STAINLESS MILLED PUTTERS

Model 02

Model 03

Model 04

72 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 12/30/08 7:16 PM Page 73

304 STAINLESS PUTTERS – MALTBY

304 STAINLESS MODEL 02 304 STAINLESS PUTTER SPECIFICATIONS Highlights: MPF loft lie bore weight head blade shaft shaft • Manufactured from soft 304 stainless 88+ ± 1° ± 1° angle (±3gms) style length type tip 02 4° 72° N/A 385 gm. heel/toe 4.700" straight .370" steel for great feel and adjustability. • Skin milled to precise specifications. PUTTER DETAILS: Finish: Black Plating COMPONENTS • 3 way face milling produces a truer roll. Material: 304 Stainless Steel • Heavier head weights offer great feel for Face Milling: 3-Way 02: MA0126 a variety of putter lengths. Shaft Rec: 02 Model - Straight Putter $ 99 ea. • Anti-glare finish. 24 • Heel / Toe body style. • Higher MOI (for comparable category styles) resists twisting on off center hits, producing a 02 Face more online and controlled distance roll. • Optimum 4˚ loft on all models. • Requires a straight putter shaft.

02 At Address 02 Sole

304 STAINLESS MODEL 03 304 STAINLESS PUTTER SPECIFICATIONS MPF loft lie bore weight head blade shaft shaft Highlights: 88+ ± 1° ± 1° angle (±3gms) style length type tip • Manufactured from soft 304 stainless 03 4° N/A 90° 405 gm. sm. mallet 3.920" double-bend .370" steel for great feel and adjustability. PUTTER DETAILS: • Skin milled to precise specifications. Finish: Black Plating COMPONENTS • 3 way face milling produces a truer roll. Material: 304 Stainless Steel Face Milling: 3-Way 03: MA0126 • Heavier head weights offer great feel for Shaft Rec: 03 Model - Double-bend a variety of putter lengths. for 90° bore $ 99 ea. • Anti-glare finish. 24 • Small Mallet body style. • Higher MOI (for comparable category styles) 03 Face resists twisting on off center hits, producing a more online and controlled distance roll. • Optimum 4˚ loft on all models. • Requires a double bend putter shaft (TT1002P).

03 At Address 03 Sole

304 STAINLESS MODEL 04 304 STAINLESS PUTTER SPECIFICATIONS Highlights: MPF loft lie bore weight head blade shaft shaft • Manufactured from soft 304 stainless 100+ ± 1° ± 1° angle (±3gms) style length type tip 04 4° N/A 90° 400 gm. mallet 4.180" double-bend .370" steel for great feel and adjustability. • Skin milled to precise specifications. PUTTER DETAILS: Finish: Black/Satin COMPONENTS • 3 way face milling produces a truer roll. Material: 304 Stainless Steel • Heavier head weights offer great feel for Face Milling: 3-Way 04: MA0140 Shaft Rec: 04 Model - Double-bend a variety of putter lengths. for 90° bore $ 99 ea. • Anti-glare finish. 24 • Modern Mallet body style. • Higher MOI (for comparable category styles) 04 Face resists twisting on off center hits, producing a more online and controlled distance roll. • Optimum 4˚ loft on all models. • Requires a double bend putter shaft (TT1002P).

04 At Address 04 Sole

Go To: www.golfworks.com — Open 24 Hours Per Day! 73 0109 P. 08-79 Heads:Layout 1 12/30/08 6:05 PM Page 74

C•E•R – CP MILLED PUTTERS C•E•R MILLED

STAINLESS PUTTERS

Model CP01

Model CP02

Model CP03

Model CP08

FORMOREINFO – CLICK www.golfworks.com

74 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 12/30/08 6:07 PM Page 75

CP MILLED PUTTERS – C•E•R

CP01,CP03,CP06,CP08 CP MILLED PUTTER RH/LH CER PUTTER SPECIFICATIONS Highlights: loft bore RH/ weight head blade shaft shaft MPF ± 1° angle LH (±3gms) style length type tip • Skin milled from 431 Stainless Steel to 88+ CP01 4° 72° rh 345 gm. heel/toe 4.453" straight .370" exact tolerances. CP02 CP02 4° 72° rh 345 gm. flanged blade 4.563" straight .370" • Black anodized CNC milled soft aluminum CP03 4° 72° rh 345 gm. heel/toe 4.564" straight .370" face insert for increased feel and improved MPF CP06 4° 72° lh 345 gm. heel/toe 4.453" straight .370" distance control. 64+ CP08 4° 72° rh 357 gm. mallet 3.800" straight .370" • Classic tour proven designs featuring PUTTER DETAILS: Finish: Black Chrome COMPONENTS modern head weights (345+ grams) for increased Material: 431 Stainless Steel playability and MOI. Face Milling: 3-Way RH: CE0031 LH: CE0031L • 3-step manufacturing process with exceptionally tight Shaft Rec: FS0006P $ 99 ea. tolerances to ensure high quality and consistency. 29 • Available in five models – — CP01 Classic heel-toe Weighted blade CP01 Face CP01 Sole — CP02 Blade style with flange — CP03 Heel-toe weighted Slant hosel — CP06 Classic heel-toe weighted blade in left-hand — CP08 Mid size mallet CP01 At • Attractive Black chrome satin Address finish. • Accepts any .370" straight putter shaft. • Headcovers – see page 85. CP02 Face CP02 Sole

CP02 At Address

CP03 Face CP03 Sole

CP03 At Address

CP08 Face CP08 Sole

CP08 At Address

Go To: www.golfworks.com — Open 24 Hours Per Day! 75 0109 P. 08-79 Heads:Layout 1 12/30/08 7:16 PM Page 76

DM – ACCUSITE PUTTERS DISTANCE MASTER

Model AS1

ACCUSITE Model AS2 PUTTERS

Model AS3

76 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 12/30/08 7:17 PM Page 77

ACCUSITE PUTTERS – DM

ACCUSITE ACCUSITE PUTTER SPECIFICATIONS PUTTER Highlights: MPF loft bore RH/ weight head blade shaft shaft 88+ ± 1° angle LH (±3gms) style length type tip • Durable anti-glare shot peen finish. AS1 3° 72° rh 350 gm. mallet 3.810" straight .370" • Manufactured from 431 Stainless Steel. RH/LH AS2 3° 72° rh/lh 350 gm. heel/toe 4.560" straight .370" • Ceramic faces provide great feedback and AS3 3° 72° rh 350 gm. mallet 3.520" straight .370" added durability. PUTTER DETAILS: • Modern 350 gram head weights for a great head feel Finish: Satin Polish/Shot Peen COMPONENTS Material: 431 Stainless Steel at a variety of lengths. Shaft Rec: FS0006P RH: DM0058 LH: DM0058L • Available in three models – — AS1 Mid size mallet available in right-hand only. $ 99 ea. — AS2 Heel-toe perimeter weighted blade available 11 in right and left-hand. — AS3 Modern high MOI mallet available in right-hand only.

AS1 Face AS1 Sole

AS1 At Address

AS2 Face AS2 Sole

AS2 At Address

AS3 Face AS3 Sole

AS3 At Address

Go To: www.golfworks.com — Open 24 Hours Per Day! 77 0109 P. 08-79 Heads:Layout 1 12/30/08 6:11 PM Page 78

DM – PURE TRACK PUTTERS DISTANCE MASTER An Innovative Alternative to Conventional Putter Heads! PURE TRACK PUTTERS

Model 404

Model 401

Model 403

Model 402 ASSEMBLED Add $1000 Per club for the combined head, shaft & grip prices listed in this catalog - CUSTOM BUILT to your specs. see pg. 7 for details PREMIUM CLUB KITS Add $500 Per club to the combined head, shaft & grip prices listed in this catalog. see pg. 7 for details

FORMOREINFO – CLICK www.golfworks.com 78 Call Toll Free: 800.848.8358 0109 P. 08-79 Heads:Layout 1 12/30/08 6:11 PM Page 79

PURE TRACK PUTTERS – DM

PURE TRACK PUTTER PURE TRACK PUTTER SPECIFICATIONS Highlights: MPF loft bore RH/ weight head blade shaft shaft • Heavier head weights provide great 88+ ± 1° angle LH (±3gms) style length type tip 401 4° 90° rh 424 gm. mallet 3.875" double-bend .370" head feel with today’s shorter playing RH/LH 402 4° 90° rh 417 gm. mallet 3.875" double-bend .370" lengths (30"- 34") or belly putter playing 403 4° 90° rh/lh 437 gm. mallet 3.875" double-bend .370" lengths (38"- 42"). 404 4° 90° rh 365 gm. mallet 3.450" double-bend .370" • 431 Stainless Steel body. PUTTER DETAILS: • Aluminum inserts provide a soft feel. Finish: Blue, Red, Black COMPONENTS Bead Blast • High MOI provides a truer path plus distance roll on Material: 431 Stainless Steel/ RH: DM0035 LH: DM0035L off-center hits. Aluminum • CNC milled face for perfect flatness and loft. Face Milling: 3-Way $ 99 ea. Shaft Rec: Double-bend (TT1004P) 16 • Sled sole design prevents dragging or snagging RH: 401, 402, 403, 404 LH: 403 on take-away. • Available in Black, Blue and Red mallet finishes. • Bead blasted blade top line prevents glare. • 401, 402, 404 model in RH only. • 403 model (Black) available in RH and LH. • Can be counterbalanced to create an anti-yip putter. • Recommended double bend shaft – TT1004P. 401 Sole

401 Face

401 At Address

402 Sole

402 Face

402 At Address

403 Sole

403 Face

403 At Address

404 Sole

404 Face

404 At Address

Go To: www.golfworks.com — Open 24 Hours Per Day! 79