Network Controller Data Sheet

Total Page：16

File Type：pdf, Size：1020Kb

Dynamic Glass network controller data sheet Function the View network Controller provides communication to all window controllers. Features • Control of wired end–devices: rs–485 (modbus) • bms integration: embedded baCnet IP gateway • Wireless control of enocean end–devices • Wireless control of Zigbee end–devices Front view Side view ZIGBEE ZIGBEE ENOCEAN ENOCEAN EXTERNAL EXTERNAL EXTERNAL EXTERNAL ANTENNA ANTENNA ANTENNA ANTENNA (OPTIONAL)(OPTIONAL) (OPTIONAL)(OPTIONAL) ) ) n n i i 2 2 . 5 5 ( ( 24V AC/DC 24V AC/DC 24V AC/DC 24V AC/DC m m CAN H CAN H CAN H CAN H m m CAN L CAN L CAN L CAN L 2 2 3 3 GND GND GND GND 1 1 126 mm (4.19266 imn)m (4.96 in) 34 mm (1.3344 i nm)m (1.34 in) Project submittal information Job name: notes: Job number: 1.0 Dynamic Glass network controller data sheet Power Agency approvals • Voltage: 24 VDC, ± 10%; Class 2 • energy management equipment, uL 916, Fourth edition, • typical Consumption: 1.2 W + output (VDC) December 23, 1998, rev. December 18, 2007 • CSA standard for signal equipment C22.2 no. 205–m1983 Communication (r2004) • Zigbee Pro, enocean, baCnet • CFr47 FCC Part 15, subpart b:2009 • Canopen® • ICes–003: Issue 4 (2004) • ethernet (10/100 mbps) Wired control Enclosure • Inputs: • material: rigid abs Quantity: 6 analog • rating: uL940 – 5Va Voltage: 0 – 10 volt • mounting: Din–rail, wall or ceiling mount • outputs: analog (x4): 0 – 12V Environment relay (x2): 24V, 1.1 amp per relay • operating temperature: 0°C (32°F) to 60°C (140°F) WARRANTY • storage temperature: –20°C (–4°F) to 60°C (140°F) the View network controller carries a warranty for a period • relative Humidity: 0 to 90% non–condensing of 5 years from date of delivery by View. refer to standard warranty terms and conditions for more details. orDerInG InFORMATIon enocean 315 mHz wire antenna model nC – aH4 Zigbee internal antenna rs–485 enocean 315 mHz external whip antenna model nC – CI 4 (na ) Zigbee high + external antenna rs–485 enocean 868 mHz external whip antenna model nC – DI 4 (eu ) Zigbee high + external antenna rs–485 Gateway only model nC – 000 no enocean, wireless no rs –485 Project submittal information Job name: notes: Job number: 1.0 viewglass.com [email protected] 408.514.6555.

Copy Link

Recommended publications

Canopen Documentation Release 1.2.2.Dev41+Gff8b5ca
canopen Documentation Release 1.2.2.dev41+gff8b5ca Christian Sandberg Sep 13, 2021 Contents 1 Network and nodes 3 2 Object Dictionary 11 3 Network management (NMT) 17 4 Service Data Object (SDO) 19 5 Process Data Object (PDO) 27 6 Synchronization Object (SYNC) 33 7 Emergency Object (EMCY) 35 8 Time Stamp Object (TIME) 37 9 Layer Setting Services (LSS) 39 10 Integration with existing code 43 11 Device profiles 45 Index 51 i ii canopen Documentation, Release 1.2.2.dev41+gff8b5ca This package provides support for interacting with a network of CANopen nodes. Note: Most of the documentation here is directly stolen from the CANopen Wikipedia page. This documentation is a work in progress. Feedback and revisions are most welcome! CANopen is a communication protocol and device profile specification for embedded systems used in automation. In terms of the OSI model, CANopen implements the layers above and including the network layer. The CANopen standard consists of an addressing scheme, several small communication protocols and an application layer defined by a device profile. The communication protocols have support for network management, device monitoring and communication between nodes, including a simple transport layer for message segmentation/desegmentation. Easiest way to install is to use pip: $ pip install canopen Contents 1 canopen Documentation, Release 1.2.2.dev41+gff8b5ca 2 Contents CHAPTER 1 Network and nodes The canopen.Network represents a collection of nodes connected to the same CAN bus. This handles the sending and receiving of messages and dispatches messages to the nodes it knows about. Each node is represented using the canopen.RemoteNode or canopen.LocalNode class.
[Show full text]
EM133 Multifunction Meter
EM133 Multifunction Meter CANopen Communications Protocol Reference Guide BG0592 Rev. A1 Every effort has been made to ensure that the material herein is complete and accurate. However, the manufacturer is not responsible for any mistakes in printing or faulty instructions contained in this book. Notification of any errors or misprints will be received with appreciation. For further information regarding a particular installation, operation or maintenance of equipment, contact the manufacturer or your local representative or distributor. REVISION HISTORY A1 February Release 2016 AnyBus® is a registered trademark of HMS Industrial Networks AB. 2 Table of Contents 1 GENERAL........................................................................................................... 5 2 CANOPEN PROTOCOL IMPLEMENTATION .................................................... 6 2.1 CANOPEN ELECTRONIC DATA SHEET (EDS) FILE ..................................................................... 6 2.2 CANOPEN VERSION ................................................................................................................. 6 2.3 BAUD RATES ........................................................................................................................... 6 2.4 NODE ADDRESS ....................................................................................................................... 6 2.5 INPUT AND OUTPUT BUFFERS ................................................................................................... 6 2.6 EXTENDED DIAGNOSTIC
[Show full text]
Communication Solutions for Rockwell Automation ® Users
WHERE AUTOMATION CONNECTS Communication Solutions for Rockwell Automation® Users ASIA PACIFIC | AFRICA | EUROPE | MIDDLE EAST | LATIN AMERICA | NORTH AMERICA Table of Contents Ethernet and Serial Gateway Solutions 2 Automotive and Inertial Navigation Gateways 2 Serial & Ethernet Modbus® Solutions 3 Scalable Modbus® & Modbus® TCP Solutions for CompactLogix™ 3 Secure Remote Connectivity 4 In-Chassis Flow Computer Solutions 6 HART Solutions 6 Power and Energy Solutions 7 DNP3 Solutions 7 Modernization Solutions 8 PROFIBUS Solutions 10 Enterprise Connectivity 11 Leverage the IIoT 11 Automated Material Handling 12 802.11n (abgn) Fast Industrial Hotspots 13 Radiating Cable 2.4 and 5 GHz Band 14 802.11n (abgn) Fast Watertight Industrial Hotspots 14 Wireless Support from Trusted Experts 15 Wireless Comparison Product Selection Chart 16 In-Chassis Product Selection Chart 17 Stand-Alone Gateways Product Selection Chart 18 Rockwell_2020_EN Ethernet and Serial Gateway Solutions ProSoft Technology’s stand-alone, DIN-rail mounted industrial gateways provide a means to read or write data from devices on dissimilar protocols. All gateways come with our ProSoft Discovery Service feature. With PDS, you don’t have to change your PC to the default subnet of the module, saving you time during setup. Building Automation solutions – including QuickServer gateways – bring key operational data directly to your Rockwell Automation controller. Use these solutions to boost energy efficiency, use the resource most productively, and decrease your usage and costs. • Gateways with two Ethernet ports allow you to isolate networks, passing only the data you want between devices • EtherNet/IP gateways support multiple I/O connections for fast real-time data • Remote configuration and diagnostics via Ethernet • SD Card slot for disaster recovery of configuration data • Up to four Serial ports PROFIBUS DP & many other protocols are also available.
[Show full text]
Handbuch Canopen ECO PIO-347+Busklemmen,Englisch
Electromechanical Automation North America Parker I/O-System CANopen ECO + I/O-Modules PIO-347 Manual Technical description, installation and configuration We reserve the right to make technical changes 88-022350-01A October 2003 The data contained in this manual correspond to the current status at the time of printing. PIO Parker I/O-System Copyright © 2003 Parker Hannifin GmbH EME All rights reserved. Microsoft Word, Microsoft Office, Windows®, Window 95™, Window 98™, Windows NT®, Window 2000™, Window XP™ and MS-DOS™ are trademarks of Microsoft Corporation. EME - Electromechanical Automation Europe Germany: Parker Hannifin GmbH Electromechanical Automation Postfach: 77607-1720 Robert-Bosch-Str. 22 D-77656 Offenburg Tel.: +49 (0)781 509-0 Fax: +49 (0)781 509-176 E-mail: [email protected] mailto:[email protected] Internet: www.parker-eme.com http://www.parker-eme.com England: Parker Hannifin plc Electromechanical Automation 21 Balena Close Poole, Dorset England, BH17 /DX UK Tel.: +44 (0)1202 69 9000 Fax: +44 (0)1202 69 5750 E-mail: [email protected] mailto:[email protected] Internet: www.parker-eme.com http://www.parker-eme.com Italy: Parker Hannifin S. p. A Electromechanical Automation Via Gounod 1 I-20092 Cinisello Balsamo (MI), Italy Tel.: +39 (0)2660 12459 Fax: +39 (0)2660 12808 E-mail: [email protected] mailto:[email protected] Internet: www.parker-eme.com http://www.parker-eme.com EMN - Electromechanical Automation North America USA: Parker Hannifin Corporation Electromechanical Automation 5500
[Show full text]
HDL Implementation of a Controller Area Network Node
Rowan University Rowan Digital Works Theses and Dissertations 12-31-2003 HDL implementation of a controller area network node Anthony Richard Marino Rowan University Follow this and additional works at: https://rdw.rowan.edu/etd Part of the Electrical and Computer Engineering Commons Recommended Citation Marino, Anthony Richard, "HDL implementation of a controller area network node" (2003). Theses and Dissertations. 1341. https://rdw.rowan.edu/etd/1341 This Thesis is brought to you for free and open access by Rowan Digital Works. It has been accepted for inclusion in Theses and Dissertations by an authorized administrator of Rowan Digital Works. For more information, please contact [email protected]. HDL Implementation of a Controller Area Network Node by Anthony Richard Marino A Thesis Submitted to the Graduate Faculty in Partial Fulfillment of the Requirements for the Degree of MASTER OF SCIENCE Department: Electrical and Computer Engineering Major: Engineering (Electrical Engineering) Approved: Members of the Committee In Charge of Major Work For the Major Department For the College Rowan University Glassboro, New Jersey 2003 ii TABLE OF CONTENTS List of Figures ................................................................................. vi List of Tables .............................................................................................. ............. viii Abstract........................................ ....................................................................................... x Acknowledgements...............................................
[Show full text]
X-Gateway™ Canopen®
X-gateway™ CANopen® The Anybus X-gateway CANopen makes it possible to integrate CANopen devices into any other PLC system. The X-gateway CANopen series provide CANopen Master (Manager) /Slave connectivity to all popular fieldbus and industrial Ethernet networks. The gateways’ high reliability and flexibility make them an indispensible connectivity tool. Typical Industries APPLICATION EXAMPLES Control Network - e.g. PROFIBUS Control Network - e.g. EtherNet/IP Network interface 1: PROFIBUS slave Network interface 1: EtherNet/IP Adapter Network interface 2: CANopen Master Network interface 2: CANopen Master Device level with CANopen slaves Network: PartNo: The Anybus X-gateway CANopen acts as an intelligen link CANopen Configuration between two industrial networks. X-gateway CANopen CANopen AB7304 The X-gateway CANopen can be combines simplicity and usability with industrial robustness, ControlNet AB7303 configurared with the “Anybus making communication across different industrial network Configuration Manager CANopen” DeviceNet AB7302 types possible. The X-gateways are easily integrated into any which is included in the price of the EtherCAT AB7300 kind of industrial automation system, ensuring a seamless X-gateway and can be downloaded information flow between CANopen and 10 other fieldbus / EtherNet/IP 2-port AB7306 from www.anybus.com. Ethernet networks. Modbus RTU AB7305 Modbus TCP 2-port AB7308 The PC connect to the CANopen Features and Benefits network via a USB-CAN adapter PROFIBUS AB7301 • Provides CANopen Master or Slave functionality on one (ordered separately) PROFINET IO AB7307 side, and fieldbus/Ethernet slave functionality on the other PROFINET IRT 2-port AB7329 side In addition, any standard CANopen • Allows transparent transfer of I/O data between CANopen configuration tool can be used to and another network configure the CANopen interface.
[Show full text]
The Future of CAN / Canopen and the Industrial Ethernet Challenge by Wilfried Voss, President Esd Electronics, Inc USA
The Future of CAN / CANopen and the Industrial Ethernet Challenge by Wilfried Voss, President esd electronics, Inc USA Industrial Ethernet technologies are a formidable challenge to CANopen as the low-cost industrial networking technology of choice. Ethernet technologies will eventually replace the majority of CANopen applications, at least in regards to new developments. For many years, Controller Area Network (CAN) and CANopen, a higher-layer protocol based on CAN, represented the best choice for low-cost industrial embedded networking. However, since the official introduction of CAN in 1986, there has been a quest to replace CAN and CANopen to overcome the most obvious shortcomings such as limited baud rate and limited network length. Industrial Ethernet technologies are currently the most formidable challenge to CANopen as the low-cost industrial networking technology of choice. Ethernet technologies will eventually replace the majority of CANopen applications, at least in regards to new developments, starting at this very moment in certain areas such as industrial control including motion control and, especially, robotics. Ironically, CAN - the underlying hardware layer of CANopen - has a far greater lifetime expectancy in the North American market than CANopen as a higher layer protocol. However, there can be too much of a good thing, and that is definitely the case when it comes to Ethernet-based fieldbus technologies. There are currently more than 20 different industrial Ethernet solutions available, all with their distinctive advantages and disadvantages, making a pro/contra decision difficult. The major question, besides the technical aspect, is which of these technologies will survive in the market, and how do they support the current need for control components.
[Show full text]
Ethercat and Canopen Reference Manual FLEXI PRO Servo Drive
EtherCAT and CANopen Reference Manual FLEXI PRO Servo Drive AF | EC | EB Models Revision: 6.4 Firmware Version: 1.41.x FLEXI PRO Revision History Document Date Remarks Revision 6.4 Jan. 2017 Firmware version 1.41.10. Object updates. EtherCAT/CANopen object support notation.Faults/Warnings/Errors updates. 6.3 May 2016 Firmware version 1.41.2. Minor corrections. 6.2 May 2016 Firmware version 1.41.2. General release. 6.1 Feb. 2016 Firmware version 1.40.0. Limited release 6.0 Nov. 2015 Firmware version 1.20.7. Internal release. 5.2 Mar. 2015 Firmware version 1.15.24 5.0 Jan. 2015 Firmware version 1.15.xx 4.0 May 2014 Firmware version 1.4.6. 3.1 Jan. 2014 Firmware version 1.4.5 3.0 Oct. 2013 Firmware version 1.4.4 Copyright Notice © 2017 Motor Power Company s.r.l. All rights reserved. No part of this work may be reproduced or transmitted in any form or by any means without prior written permission of Motor Power Company. Disclaimer This product documentation was accurate and reliable at the time of its release. Motor Power Company s.r.l. reserves the right to change the specifications of the product described in this manual without notice at any time. Trademarks Flexi SUITE and sensAR are trademarks of Motor Power Company s.r.l. CANopen and CiA are registered trademarks of the CAN in Automation User's Group EtherCAT is a registered trademark of Beckhoff Automation GmbH EnDat is a registered trademark of Dr. Johannes Heidenhain GmbH HIPERFACE is a registered trademark of Sick Stegmann Gmbh BiSS-C is a registered trademark of iC-Haus GmbH Windows is a registered trademark of Microsoft Corporation Contact Information Motor Power Company s.r.l.
[Show full text]
Devicenet and Canopen Expansion Modules for MAC Motors
DeviceNet and CANopen expansion modules for MAC motors The modular construction of JVL’s MAC50-4 and MAC800 series of integrated MAC motors makes them particularly well suited for a large number of fieldbus applications. The Devicenet module and the CANopen module are described in this product data sheet. The series also includes a Profibus module. New modules are under development, including for example modules for USB, Ethernet, Bluetooth and Zigbee wireless com- munication. The AC-servo motor, encoder, ampli- fier, positional controller and network module are all built into the motor. The only connections required are a supply voltage and the network cables. A double-supply facility is available nector. 6 inputs and 2 outputs for At no additional cost, the EDS files, in order to ensure that position and version with cable glands. All 24V function blocks and program examples parameters are maintained intact for PNP and with opto-couplers. for the most commonly used Devi- example during an emergency stop. • I/O can be used for end-of-travel cenet PLC´s from Omron and Allen Via Devicenet and CANopen it is pos- limits and high-speed start/stop Bradley/Rockwell can be downloaded sible to access all of the MAC motor’s from www.jvl.dk. The function blocks • Hardware and software adjustment registers. are fully documented so they can be of baud rate and address The Devicenet module (MAC00-FD4) readily adapted for use with other PLC and the CANopen module (MAC00- • Galvanically insulated I/O and types. FC4) are supplied with M2 connectors network connections (IP67) with watertight connection for • A selection of standard commands CANopen Module MAC00-FC4 use in harsh industrial environments.
[Show full text]
Industrial Ethernet Facts Compares PROFINET (RT, IRT), POWERLINK, Ethernet/IP, Ethercat, and SERCOS III, I.E
Luca Lachello Wratil Peter Anton Meindl Stefan Schönegger Singh Karunakaran Bhagath Huazhen Song Stéphane Potier Preface Outsiders are not alone in finding the world of Industrial Ethernet somewhat confusing. Experts who examine the matter are similarly puzzled by a broad and intransparent line-up of competing systems. Most manufacturers provide very little information of that rare sort that captures techni- cal characteristics and specific functionalities of a certain standard in a way that is both com- prehensive and easy to comprehend. Users will find themselves even more out of luck if they are seeking material that clearly compares major systems to facilitate an objective assessment. We too have seen repeated inquiries asking for a general overview of the major systems and wondering “where the differences actually lie”. We have therefore decided to dedicate an issue of the Industrial Ethernet Facts to this very topic. In creating this, we have tried to remain as objective as a player in this market can be. Our roundup focuses on technical and economic as well as on strategic criteria, all of which are relevant for a consideration of the long-term via- bility of investments in Industrial Ethernet equipment. The arguments made in this publication were advanced and substantiated in numerous conversations and discussions with developers and decision-makers in this field. We have made every attempt to verify claims whenever practically possible. This document must not be modified Despite all our efforts, though, we were unable to ascertain exact, verifiable information on without prior consent of its publisher. some aspects, which prompts us to ask for your help: if you would like to propose any Passing on the document in its entirety amendments or corrections, please send us an e-mail or simply give us a call.
[Show full text]
User Manual Canopen/Canopen-FD Master/Slave Protocol Stack
emotas embedded communication GmbH, Fritz-Haber-Straße 9, D-06217 Merseburg, Germany User Manual CANopen/CANopen-FD Master/Slave Protocol Stack V 3.7.2 Version History Version Changes Date Editor Release 1.0.2 Dynamic objects 2012/12/20 ged 1.1.0 Change version to stack version 2013/03/09 boe 1.2.0 Change version to stack version 2013/04/04 boe 1.3.0 Sleep Mode added 2013/06/06 oe 1.4.0 SDO block transfer added 2013/07/08 oe 1.5.0 Object indication handling added 2013/10/02 oe 1.6.0 Added new features 2014/09/05 ri 1.7.0 Insert limit check 2014/09/05 ri CANopen/CANopen-FD Protocol Stack V3.7 page 1 of 80 emotas embedded communication GmbH, Fritz-Haber-Straße 9, D-06217 Merseburg, Germany Version Changes Date Editor Release 2.0.0 Add Multiline chapter 2014/11/15 boe 2.2.0 Dynamic objects updated, network 2015/05/15 ged gateway 2.2.4 Domain indication 2015/06/29 ged Bootup Procedure 2.3.1 Split Indication/DynOd Application 2015/07/14 ged 2.4.0 Add MPDO Usage 2015/08/25 ged 2.4.3 Removed non CANopen msg 2015/10/29 phi 2.6.1 Updated C#, LSS Slave, Store 2016/06/17 phi 2.6.4 Add SDO client domain indication 2016/09/23 boe 2.7.0 Adapt to library stack 2.7.0 2017/05/08 boe 2.99.0 Added CAN-FD 2018/06/22 phi 3.0.0 Release V3.0 2018/06/28 phi 3.2.0 Domain/String-handling 2019/01/31 hil 3.4.3 Updated Configuration Manager 2019/08/16 hil 3.5.0 Change to emotas 2019/10/07 boe 3.6.0 New version 2020/03/10 boe 3.7.0 New version 2020/06/20 boe 3.7.1 Add CANopen introduction 2020/08/21 boe CANopen/CANopen-FD Protocol Stack V3.7 page 2 of 80 emotas embedded communication GmbH, Fritz-Haber-Straße 9, D-06217 Merseburg, Germany Table of Contents 1 Overview...........................................................................................................................................................................
[Show full text]
Thread Prioritization for an Embedded Canopen Master Stack with Web Interface
iCC 2005 CAN in Automation Thread prioritization for an embedded CANopen master stack with web interface D. M. Armenis and J. S. Smith Department of Electrical Engineering and Electronics The University Of Liverpool As Tele-robotics continuously receives industrial attention, an embedded CANopen Master Stack, accessible via the Internet, is proposed. A configurable real-time operating system permits multi-threaded development whilst PLD technology ensures system evolution. The impact thread prioritization has on system performance is investigated, whilst initial design considerations are also presented. Introduction priority interrupt is used as a pulse generator. It is responsible for distributing Multi-threaded, real-time, control a pulse, with fixed width, to the stepper processes introduce synchronization motors commanding them to advance. and timing issues, unknown to many The lower priority interrupt is used to embedded applications [1,2]. The scope of transmit the EMCY PDO during an the presented work is both to identify the emergency. In the Encoder Node, the last reasons for prioritizing control over safety slave node in the system, the higher threads and to determine their minimum priority interrupt is used as the SYNCH request period during normal operation of producer for the network. The lower an embedded CANopen Stack with Web priority interrupt is used for the EMCY Interface. The results of this study provide event as in the Drive Nodes. As a result, a clear indication of the schedulability of both time depended protocols and CAN the proposed system. The determinism of bus receivers are left unsupported. While the stack can also be improved, a required the CAN bus registers can be monitored property for bridging real-time Ethernet [3] by a polling procedure, the mandatory with CAN.
[Show full text]