DOCSLIB.ORG

Comparison Table for Engtech, Ieng and Ceng Standards

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Comparison Table for Engtech, Ieng and Ceng Standards Comparison table for EngTech, IEng and CEng Standards Taken from the UK Standard for Professional Engineering The Engineering Council and UK-SPEC Competence and Commitment (UK-SPEC) The Engineering Council sets the Standards which need to be met for Fourth edition an individual to become professionally registered. The Engineering Published by the Engineering Council 2020 Council is the UK’s regulatory body for the engineering profession. It operates under a Royal Charter and is governed by a Board that represents UK Licensees as well as individuals from industries and Professional registration sectors with an interest in the regulation of the profession. Achieving professional registration as an Engineering Technician (EngTech), Incorporated Engineer (IEng), or Chartered Engineer These competence statements are taken from the UK Standard for (CEng) demonstrates that an engineer or technician has reached a set Professional Engineering Competence and Commitment (UK-SPEC), standard of knowledge, understanding and occupational competence. fourth edition. UK-SPEC forms part of the Standard used by the UK engineering profession to assess the competence and commitment of Professional registration sets individual engineers and technicians individual engineers and technicians. It was developed collaboratively apart from those who are not registered. Gaining a professional in consultation with engineers representing the breadth of the title establishes a person’s proven knowledge, understanding profession, from industry, academia and many different disciplines and and competence. Registration also demonstrates an individual’s specialisms. commitment to professional standards and to developing and enhancing competence through Continuing Professional Development To download the full UK-SPEC document for free please visit the (CPD). Engineering Council website: www.engc.org.uk/ukspec Engineering Technician (EngTech) Incorporated Engineer (IEng) Chartered Engineer (CEng) Engineering Technicians apply proven techniques and procedures to Incorporated Engineers maintain and manage applications of current Chartered Engineers develop solutions to complex engineering the solution of practical engineering problems. and developing technology, and may undertake engineering design, problems using new or existing technologies, and through innovation, development, manufacture, construction and operation. creativity and technical analysis. Engineering Technicians shall demonstrate: Incorporated Engineers shall demonstrate: Chartered Engineers shall demonstrate: • Engineering knowledge and understanding to apply technical and • The theoretical knowledge to solve problems in developed • The theoretical knowledge to solve problems in new and practical skills technologies using well proven analytical techniques established technologies and to develop new analytical techniques • Evidence of their contribution to either the design, development, • Successful application of their knowledge to deliver engineering • Successful application of the knowledge to deliver innovative manufacture, commissioning, decommissioning, operation or projects or services using established technologies and methods products and services and/or taking technical responsibility for maintenance of products, equipment, processes or services • Contribution to the financial and planning aspects of projects or complex engineering systems • Supervisory or technical responsibility tasks and to leading and developing other professional staff • Responsibility for the financial and planning aspects of projects, • Effective interpersonal skills in communicating technical matters • Effective interpersonal skills in communicating technical matters sub-projects or tasks • The ability to operate in accordance with safe systems of work • The ability to specify and operate to safe systems of work and • Leadership and development of other professional staff through and to demonstrate appropriate understanding of the principles of to demonstrate appropriate consideration of the principles of management, mentoring or coaching sustainability sustainability • Effective interpersonal skills in communicating technical matters • Commitment to professional engineering values. • Commitment to professional engineering values. • Understanding of the safety and sustainability implications of their work, seeking to improve aspects where feasible • Commitment to professional engineering values. © Engineering Council 2020. The Engineering Council encourages publication of extracts from this Standard, subject to attribution. Download the full UK Standard for Professional Engineering Competence and Commitment (UK-SPEC) at: www.engc.org.uk/ukspec page 1 of 3 Engineering Technician (EngTech) Incorporated Engineer (IEng) Chartered Engineer (CEng) The Competence and Commitment Standard for Engineering The Competence and Commitment Standard for Incorporated The Competence and Commitment Standard for Chartered Technicians Engineers Engineers Engineering Technicians must be competent throughout their working Incorporated Engineers must be competent throughout their working Chartered Engineers must be competent throughout their working life, life, by virtue of their education, training and experience in the following life, by virtue of their education, training and experience in the following by virtue of their education, training and experience in the following ways: ways: ways: A. Knowledge and understanding A. Knowledge and understanding A. Knowledge and understanding Engineering Technicians shall use engineering knowledge and Incorporated Engineers shall use a combination of general and Chartered Engineers shall use a combination of general and understanding to apply technical and practical skills. specialist engineering knowledge and understanding to apply specialist engineering knowledge and understanding to optimise existing and emerging technology. the application of advanced and complex systems. The applicant shall demonstrate that they: The applicant shall demonstrate that they: The applicant shall demonstrate that they: 1. Review and select appropriate techniques, procedures and methods 1. Have maintained and extended a sound theoretical approach to the 1. Have maintained and extended a sound theoretical approach to to undertake tasks application of technology in engineering practice enable them to develop their particular role 2. Use appropriate scientific, technical or engineering principles. 2. Use a sound evidence-based approach to problem-solving and 2. Are developing technological solutions to unusual or challenging contribute to continuous improvement. problems, using their knowledge and understanding and/or dealing with complex technical issues or situations with significant levels of risk. B. Design, development and solving engineering problems B. Design, development and solving engineering problems B. Design, development and solving engineering problems Engineering Technicians shall contribute to the design, Incorporated Engineers shall apply appropriate theoretical and Chartered Engineers shall apply appropriate theoretical and development, manufacture, construction, commissioning, practical methods to design, develop, manufacture, construct, practical methods to the analysis and solution of engineering decommissioning, operation or maintenance of products, commission, operate, maintain, decommission and recycle problems. equipment, processes, systems or services. engineering processes, systems, services and products. The applicant shall demonstrate that they: The applicant shall demonstrate that they: The applicant shall demonstrate that they: 1. Identify problems and apply appropriate methods to identify causes 1. Identify, review and select techniques, procedures and methods to 1. Take an active role in the identification and definition of project and achieve satisfactory solutions undertake engineering tasks requirements, problems and opportunities 2. Identify, organise and use resources effectively to complete tasks, 2. Contribute to the design and development of engineering solutions 2. Can identify the appropriate investigations and research needed to with consideration for cost, quality, safety, security and environmental undertake the design, development and analysis required to complete impact. an engineering task and conduct these activities effectively 3. Implement design solutions for equipment or processes and 3. Can implement engineering tasks and evaluate the effectiveness of contribute to their evaluation. engineering solutions. © Engineering Council 2020. The Engineering Council encourages publication of extracts from this Standard, subject to attribution. Download the full UK Standard for Professional Engineering Competence and Commitment (UK-SPEC) at: www.engc.org.uk/ukspec page 2 of 3 Engineering Technician (EngTech) Incorporated Engineer (IEng) Chartered Engineer (CEng) C. Responsibility, management and leadership C. Responsibility, management and leadership C. Responsibility, management and leadership Engineering Technicians shall accept and exercise personal Incorporated Engineers shall provide technical and commercial Chartered Engineers shall provide technical and commercial responsibility. management. leadership. The applicant shall demonstrate that they: The applicant shall demonstrate that they: The applicant shall demonstrate that they: 1. Work reliably and effectively without close supervision, to the 1. Plan the work and resources needed to enable effective 1. Plan
Load more

Recommended publications
  • Membership Committee Terms of Reference
    Membership Committee Terms of Reference Constitution The Membership Committee is a sub-committee of the Board of Trustees (BoT). The Committee is established pursuant to a) Article 50 of the Articles of Association, and b) Section 10 of the Bye-laws. Overall purpose(s) The principal purposes of the Committee are to: Ensure that the Institute’s membership and professional standards are maintained and applied to the required levels; and Ensure that the Institute complies with the requirements for registration of all relevant Licensing bodies including. Reporting The Committee will report to BoT through: Providing BoT with access to minutes of all its meetings; minutes will include details of decisions taken. Provision of reports, advice and recommendations in relation to the Committee’s terms of reference. Provide such reporting and audit information to the relevant Licensing Bodies as may be required. Key responsibilities Membership Standards and Requirements Recommend to the Board of Trustees the Institute’s grades for individual nuclear professionals and other membership levels, qualifications/criteria required and post-nominal letters, making recommendations as required to the Board of Trustees. Set out, update and promulgate the requirements for registration with the Engineering Council (EngC), the Science Council (SC), European Federation of National Engineering Associations (FEANI), and/or any other licensed registration. Ensure that the Nuclear Institute complies with the registration standards and requirements of all Licensing bodies including the Engineering Council (EngC), the Science Council (SC), European Federation of National Engineering Associations (FEANI), and/or any other licensed registration. Assess and approve suitable candidates for membership and for registration with EngC, SC, and/or any other Licensing body and FEANI.
    [Show full text]
  • POCKET GUIDE to PROFESSIONAL REGISTRATION for Engineers and Technicians 2017
    ENGINEERING COUNCIL POCKET GUIDE TO PROFESSIONAL REGISTRATION for engineers and technicians 2017 www.engc.org.uk Foreword About this guide Operating under a Royal Charter, the Engineering This pocket guide has been developed for use by all those working within the professional engineering community. It Council is charged with regulating the UK aims to provide key information about registration with the engineering profession on behalf of society. Engineering Council and explains the relationship between We hold the national Register of those who the many organisations working within this community. have satisfied their peers of their competence More detailed information and other Engineering Council publications are available on the internet. and commitment as Engineering Technicians, Incorporated Engineers, Chartered Engineers and The guide has been produced in both hard copy and online as an ebook. Whilst data contained in the hard copy was ICT Technicians. We set the education standards correct (as supplied to the Engineering Council) at the time for engineering programmes that provide the of publication, subsequent changes are inevitable. The underpinning knowledge and understanding Engineering Council will endeavour to keep the ebook version required to practise engineering, as well as setting up to date as changes are notified to the organisation, but cannot be held responsible for incorrect data. Therefore, it is standards for professional development. We can advisable to check the primary source of information before only achieve this through the commitment of acting upon any of the information provided. the entire professional engineering community, Should you come across incorrect information contained within supported by academics and employers.
    [Show full text]
  • Relevant Cvs Dr Barbara Lane Freng FRSE Ceng Fire Safety Engineering Speci
    REPORT OF DR BARBARA LANE SPECIALIST FIELD FIRE SAFETY ENGINEERING ON BEHALF OF: GRENFELL TOWER INQUIRY Grenfell Tower - fire safety investigation: Module 1- Relevant CVs Experience, qualifications, appointments, speciality of the Expert & of those who have assisted in the preparation of the Module I reports Dr Barbara Lane FREng FRSE CEng Fire Safety Engineering 23rd October 2020 Specialist Field Fire Safety Engineering Assisted by Dr Susan Deeny, Dr Graeme Flint, Mr Tom Parker, Mr Mark Maddison, Mr Daniel Thomson, Mr Alfie Chapman On behalf of Grenfell Tower Inquiry On instructions of Cathy Kennedy, Solicitor, Grenfell Tower Inquiry Subject Matter To examine the circumstances surrounding the fire at Grenfell Tower on 14th June 2017 Inspection Date(s) 6th October, I st November, 7 -9th November 2017 Dr Barbara Lane Ove Arup & Partners Limited 13 Fitzroy Street London WIT 4BQ BLARP20000015/1 BLARP20000015_0001 REPORT OF DR BARBARA LANE SPECIALIST FIELD FIRE SAFETY ENGINEERING ON BEHALF OF: GRENFELL TOWER INQUIRY Experience, qualifications, appointments, speciality of the Expert and of those who have assisted in the preparation of Dr Lane's Phase 2 Module 1 reports Ove Arup & Partners Ltd BLARP20000015/2 BLARP20000015_0002 REPORT OF DR BARBARA LANE SPECIALIST FIELD FIRE SAFETY ENGINEERING ON BEHALF OF: GRENFELL TOWER INQUIRY CONTENTS Al Curriculum Vitae of Dr Barbara Lane 2 A2 Curriculum Vitae of Dr Susan Deeny 7 A3 Curriculum Vitae of Dr Graeme Flint 9 A4 Curriculum Vitae of Tom Parker 11 A5 Curriculum Vitae of Daniel Thomson 12 A6 Curriculum
    [Show full text]
  • WG1 Final Report
    Industry Response Group Competences for Building a Safer Future Working Group 01 – Engineers Final Report version: 1.0 1.00 Engineers - membership and lead contributors 1.01 Chair: George Adams, SPIE UK, Engineering Council Secretary: Katy Turff, Engineering Council 1.02 Lead contributors See Annex A. 2.00 Executive Summary WG1 brought together four end-user organisations, 13 professional engineering institutions and two other industry bodies led and supported by the Engineering Council. WG1 had good integration with 2.01 MHCLG. The scope of WG1 was the competence required by engineering professionals engaged in design, build, test and maintenance of the fixed engineering assets that constitute life safety systems within 2.02 a Higher-Risk Residential Building (HRRB) and proposals for the Safety Case process. Engineering life safety systems are critical to the safety of occupants and fire and rescue services, and buildings must be seen as an integrated solution if the integrity of the life safety strategy is to be maintained. The choice, specification and performance of each individual element of the system or 2.03 collection of systems is critical to the overall safety of occupants. WG1 set out to define how the competence and professionalism to undertake these tasks could be better recognised and this included the need for improving the integration of systems and approaches. For residents to be safe and feel safe, WG1 identified a need to integrate the currently disparate engineering practices in HRRBs and provide a new coherence to
    [Show full text]
  • Mechanical Engineering
    Careers and Employability Service What Can I Do With My Degree? Mechanical Engineering Introduction This resource is designed for you to discover what you can do with your degree. It contains information on: • Skills gained through your degree - useful in career decision-making and when applying for graduate jobs • Overview of the main career areas with your degree – to help you understand what other students with your degree have gone on to do • Links to selected relevant professional bodies and associations – to help you understand the sector and also provide advice and information • Finding opportunities – including finding jobs and internships, volunteering opportunities, specialist recruitment agencies. • Further study - professional qualifications and programmes aligned to your first degree Skills gained through your degree In a competitive graduate labour market, it is important that you are able to demonstrate the key skills that you have developed through your degree programme. Reflecting upon the skills you have gained and your skill strengths can also be helpful in career decision making. The following resources can help you to understand the skills gained from your degree. Prospects Understanding your skills Your course learning outcomes – Your course modules contain aims and learning outcomes. These are useful in assisting you to recognise and reflect upon the skills developed during your studies. Overview of the main career areas with your degree Prospects TargetJobs National Careers Service Links to selected professional
    [Show full text]
  • Chartered Status
    Chartered Status The chartered title can be held by those eligible people in the Member and Fellowship categories of Institute membership. The title Chartered Physicist is exclusive to the Institute of Physics. Chartered Engineer is maintained by the Engineering Council UK and Chartered Scientist by the Science Council. Chartered status stands for the highest standards of professionalism, up-to-date expertise, quality and safety, and for capacity to undertake independent practice and exercise leadership. As well as competence, the title denotes commitment to keep pace with advancing knowledge and with the increasing expectations and requirements for which any profession must take responsibility. Chartered status is the aspiration of members engaged at the leading edge of all fields of physics and its applications. Why Become Chartered? Physics is an integral part of our culture, providing the foundations for many scientific disciplines including chemistry, biology, the geo-sciences and engineering. The increase in wealth, economic globalisation, living standards and the quality of life in the 20th century was largely based on technological progress which in turn relied heavily on innovative research in physics. These trends are anticipated to continue and, indeed, strengthen in the 21st Century. As part of this the Institute has strengthened the standard for Chartered Physicist and made it a valuable tool for all employers (whether major multinationals on a recruitment cycle, SMEs or start- ups.). Chartered Physicists agree to be bound by a Code of Conduct that reflects best practice. The Code requires our members not only to show a high level of professionalism, but also to continually advance their competence through continuing professional development.
    [Show full text]
  • Registration Code of Practice (Registration Code)
    When printed this becomes an uncontrolled document. Please check the Engineering Council website for the most up to date version. Engineering Council Registration Code of Practice (Registration Code) 1 This Registration Code of Practice is published by the Board of the Engineering Council under Bye-Law 2 and governs the implementation by Licensed Members of the United Kingdom Standard for Professional Engineering Competence (UK- SPEC) and the Standard for Information and Communications Technology Technician (Standard for ICTTech), hereafter referred to as the Standards, and the registration of individuals under those Standards. 2 Nothing in this Registration Code shall be taken as overriding obligations placed on Engineering Council and Licensed Members by national and EU legislation, for example any requirement to process applicants holding EU professional qualifications under the provisions of relevant Directive(s). 3 The application of this Registration Code by Licensed Members shall be subject to audit by the Engineering Council Quality Assurance Committee under Bye-Law 16. Licensed Members shall maintain sufficient records for external audit purposes. 4 The Board of the Engineering Council may add to, amend or revoke paragraphs in this Registration Code, on the recommendation of Registration Standards Committee, or may delegate responsibility for amendment to that committee. Any such changes shall be communicated to all Licensed Members. 5 Licensed Members shall not register individuals with the Engineering Council, or accredit or approve programmes and qualifications for such registration, outside the terms of this Registration Code, without the authorisation of the Registration Standards Committee. 6 Technical or procedural issues arising in the application of this Registration Code shall be referred to the Engineering Council for consideration, following which the Engineering Council may issue guidance.
    [Show full text]
  • Setting the Bar a New Competence Regime for Building a Safer Future
    SETTING THE BAR A NEW COMPETENCE REGIME FOR BUILDING A SAFER FUTURE The Final Report of the Competence Steering Group for Building a Safer Future October 2020 CONTENTS FOREWORD 3 Graham Watts OBE, Chairman of the Competence Steering Group 1 OVERVIEW 6 2 AN OVERARCHING SYSTEM FOR SETTING AND 23 OVERSEEING STANDARDS OF COMPETENCE The development of National Standards and an overarching 23 competence body (WG0) Developing an overarching competence framework 31 Oversight of assessment 36 Developing construction products competence (WG12) 41 3 WORKING GROUP REPORTS 45 WG1 Engineers 45 WG2 Installers 53 WG3 Fire Engineers 61 WG4 Fire Risk Assessors 71 WG5 Fire Safety Enforcement Officers 77 WG6 Building Standards 83 WG7 Building Designers 91 WG8 Building Safety Managers 99 WG9 Site Supervisors 112 WG10 Project Managers 119 WG11 Procurement Professionals 123 4 THE NEXT STAGE 129 Consolidated list of all recommendations 129 Implementation plan 139 Conclusions 141 5 APPENDICES 144 A Acronyms used in Setting the Bar 144 B Glossary of terms 148 C Members of the Competence Steering Group and acknowledgements 158 D Compilation list of annexes from all reports and links 161 EXECUTIVE SUMMARY This has been published as a separate document at: http://cic.org.uk/setting-the-bar-annexes.php SETTING THE BAR | A new competence regime for building a safer future FOREWORD ne legend of the performing arts is months – it has been seriously impacted the reported saying of W C Fields by the Covid-19 pandemic. We have Othat actors should “never work with temporarily lost chairs and secretaries of children or animals”.
    [Show full text]
  • The Engineering and Technology Board Trading As the Engineeringuk Group Report and Financial Statements for the 17 Months Ended 31 August 2020
    The Engineering and Technology Board Trading as the EngineeringUK Group Report and Financial Statements For the 17 Months Ended 31 August 2020 COMPANY NO: 4322409 ENGLAND AND WALES CHARITY NO: 1089678 SCOTLAND CHARITY NO: SC046249 www.engineeringuk.com EngineeringUK Annual Report 31 August 2020 1 CONTENTS Page Report of the Trustees 3 Report of the Independent Auditor 16 Financial Statements 20 Governance and Management 37 Professional Advisors 40 www.engineeringuk.com EngineeringUK Annual Report 31 August 2020 2 Report of the Trustees Introduction The Trustees present this Trustees’ Annual Report for the purpose of the Charities SORP and also includes on pages 3-15 the Strategic Report required under company law. The legal and administrative information set out on pages 37-40 also forms part of this report. The financial statements comply with current statutory requirements, the Memorandum and Articles of Association and the Statement of Recommended Practice – Accounts and Reporting by Charities issued in 2015. Due to a change in our financial year end, this Annual Report covers a 17-month period. For the first 11 months, from the start of April 2019 to the end of February 2020, we report on a period in which our activity progressed smoothly within a relatively stable context, albeit with anticipation of Brexit and the associated political disruption, including a general election and new Prime Minister. The next six months of our financial year, from the start of March to the end of August 2020 was a stark contrast, with the unforeseen and pervasive impact of the coronavirus pandemic greatly affecting our work and its context.
    [Show full text]
  • A Vision for the Future of UK Engineering
    Engineering the future - a vision for the future of UK engineering Engineering is the art and practice of changing and shaping the material world for the benefit of humankind – engineers turn ideas into reality. In any situation, an engineer must have a clear understanding of the issues to be addressed and the science behind the issues. An engineer must understand how technical and scientific knowledge can be applied and implemented, while also being cognisant of the cost, reliability and socio-economic implications. This briefing provides an engineering perspective on the major issues currently facing the UK and highlights five policy priorities for government to address. Contents Introduction 1 1. Sustaining and encouraging investment in skills for the future 2 2. How to make the UK a leader in low carbon technology 4 3. Ways of capitalising on the value of the UK science and engineering research base 6 4. Harnessing the power of public spending to encourage innovation 8 5. Making greater use of engineering advice in government policymaking 10 Footnotes 12 Engineering the future - a vision for the future of UK engineering i Introduction The UK’s future prosperity requires the development of a more diverse economic base. The UK must create more successful high-added value businesses and industries to manufacture, build and maintain the wealth creating products, infrastructure and services of the future. These innovative enterprises will build on our national strengths in science and technology, address grand challenges, boost GDP and underpin social progress at all levels. The scale and complexity of the process of 21st century re-industrialisation required is such that it cannot be left solely to the market to deliver.
    [Show full text]
  • Annual Report and Financial Accounts 2020
    Engineering Council Annual Report and Financial Accounts 2020 Registered Charity No 286142 Annual Report and Financial Accounts 2020 Contents Foreword .......................................................................................................................................................3 Chairman and CEO’s statements .............................................................................................................4 1. Registration statistics as of 31 December 2020 ................................................................................5 2. Strategy and performance in 2020 ....................................................................................................7 3. 2020 Activities and Achievements ....................................................................................................7 4. Impact of Covid-19 ......................................................................................................................... 10 5. Risk and compliance ...................................................................................................................... 12 6. Financial review.............................................................................................................................. 14 7. Public benefit report ....................................................................................................................... 16 8. How we operate ............................................................................................................................
    [Show full text]
  • ABET Accreditation: Introduction
    An Overview of International ABET Accreditation D. Joseph Mook Professor of Mechanical and Aerospace Engineering University at Buffalo, SUNY *currently on sabbatical, Universite de Technologie de Compiegne, France Disclaimer • ABET, Inc., is a professional organization • I have no affiliation with ABET and do not claim to represent their views • ABET did not participate in my preparation of this presentation What is ABET? • Formerly, “American Board of Engineering and Technology” but official name is now “ABET, Inc” • Private, not-for-profit (NGO) – Accreditation is therefore voluntary – Everybody does it! • Started by consortium of professional engineering organizations as quality control – Today, 29 technical societies • Supported by fees paid by universities • Has permanent paid staff, but most evaluators are volunteers from industry and universities • Headquarters in Baltimore, MD • Accredits engineering, technology, computer science, applied science ABET Accreditation Overview • “Accreditation” = independent outside certification of engineering education quality – Normally a “binary” decision (yes or no) – Length can vary up to 6 years • Accreditation of specific degree programs only! – Not granted to universities (e.g., UB has 8 accredited programs) – Some US schools have 15 or more ABET programs – Total of 2700 programs in US, at 550 different schools/universities – Each program must be accredited alone, but some information can be shared across programs • ABET will accredit MS programs, but in US, essentially all accreditation
    [Show full text]