Training Program 2021
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Xpress Nonlinear Manual This Material Is the Confidential, Proprietary, and Unpublished Property of Fair Isaac Corporation
R FICO Xpress Optimization Last update 01 May, 2018 version 33.01 FICO R Xpress Nonlinear Manual This material is the confidential, proprietary, and unpublished property of Fair Isaac Corporation. Receipt or possession of this material does not convey rights to divulge, reproduce, use, or allow others to use it without the specific written authorization of Fair Isaac Corporation and use must conform strictly to the license agreement. The information in this document is subject to change without notice. If you find any problems in this documentation, please report them to us in writing. Neither Fair Isaac Corporation nor its affiliates warrant that this documentation is error-free, nor are there any other warranties with respect to the documentation except as may be provided in the license agreement. ©1983–2018 Fair Isaac Corporation. All rights reserved. Permission to use this software and its documentation is governed by the software license agreement between the licensee and Fair Isaac Corporation (or its affiliate). Portions of the program may contain copyright of various authors and may be licensed under certain third-party licenses identified in the software, documentation, or both. In no event shall Fair Isaac Corporation or its affiliates be liable to any person for direct, indirect, special, incidental, or consequential damages, including lost profits, arising out of the use of this software and its documentation, even if Fair Isaac Corporation or its affiliates have been advised of the possibility of such damage. The rights and allocation of risk between the licensee and Fair Isaac Corporation (or its affiliates) are governed by the respective identified licenses in the software, documentation, or both. -
Solving Mixed Integer Linear and Nonlinear Problems Using the SCIP Optimization Suite
Takustraße 7 Konrad-Zuse-Zentrum D-14195 Berlin-Dahlem fur¨ Informationstechnik Berlin Germany TIMO BERTHOLD GERALD GAMRATH AMBROS M. GLEIXNER STEFAN HEINZ THORSTEN KOCH YUJI SHINANO Solving mixed integer linear and nonlinear problems using the SCIP Optimization Suite Supported by the DFG Research Center MATHEON Mathematics for key technologies in Berlin. ZIB-Report 12-27 (July 2012) Herausgegeben vom Konrad-Zuse-Zentrum f¨urInformationstechnik Berlin Takustraße 7 D-14195 Berlin-Dahlem Telefon: 030-84185-0 Telefax: 030-84185-125 e-mail: [email protected] URL: http://www.zib.de ZIB-Report (Print) ISSN 1438-0064 ZIB-Report (Internet) ISSN 2192-7782 Solving mixed integer linear and nonlinear problems using the SCIP Optimization Suite∗ Timo Berthold Gerald Gamrath Ambros M. Gleixner Stefan Heinz Thorsten Koch Yuji Shinano Zuse Institute Berlin, Takustr. 7, 14195 Berlin, Germany, fberthold,gamrath,gleixner,heinz,koch,[email protected] July 31, 2012 Abstract This paper introduces the SCIP Optimization Suite and discusses the ca- pabilities of its three components: the modeling language Zimpl, the linear programming solver SoPlex, and the constraint integer programming frame- work SCIP. We explain how these can be used in concert to model and solve challenging mixed integer linear and nonlinear optimization problems. SCIP is currently one of the fastest non-commercial MIP and MINLP solvers. We demonstrate the usage of Zimpl, SCIP, and SoPlex by selected examples, give an overview of available interfaces, and outline plans for future development. ∗A Japanese translation of this paper will be published in the Proceedings of the 24th RAMP Symposium held at Tohoku University, Miyagi, Japan, 27{28 September 2012, see http://orsj.or. -
Numericaloptimization
Numerical Optimization Alberto Bemporad http://cse.lab.imtlucca.it/~bemporad/teaching/numopt Academic year 2020-2021 Course objectives Solve complex decision problems by using numerical optimization Application domains: • Finance, management science, economics (portfolio optimization, business analytics, investment plans, resource allocation, logistics, ...) • Engineering (engineering design, process optimization, embedded control, ...) • Artificial intelligence (machine learning, data science, autonomous driving, ...) • Myriads of other applications (transportation, smart grids, water networks, sports scheduling, health-care, oil & gas, space, ...) ©2021 A. Bemporad - Numerical Optimization 2/102 Course objectives What this course is about: • How to formulate a decision problem as a numerical optimization problem? (modeling) • Which numerical algorithm is most appropriate to solve the problem? (algorithms) • What’s the theory behind the algorithm? (theory) ©2021 A. Bemporad - Numerical Optimization 3/102 Course contents • Optimization modeling – Linear models – Convex models • Optimization theory – Optimality conditions, sensitivity analysis – Duality • Optimization algorithms – Basics of numerical linear algebra – Convex programming – Nonlinear programming ©2021 A. Bemporad - Numerical Optimization 4/102 References i ©2021 A. Bemporad - Numerical Optimization 5/102 Other references • Stephen Boyd’s “Convex Optimization” courses at Stanford: http://ee364a.stanford.edu http://ee364b.stanford.edu • Lieven Vandenberghe’s courses at UCLA: http://www.seas.ucla.edu/~vandenbe/ • For more tutorials/books see http://plato.asu.edu/sub/tutorials.html ©2021 A. Bemporad - Numerical Optimization 6/102 Optimization modeling What is optimization? • Optimization = assign values to a set of decision variables so to optimize a certain objective function • Example: Which is the best velocity to minimize fuel consumption ? fuel [ℓ/km] velocity [km/h] 0 30 60 90 120 160 ©2021 A. -
Julia: a Modern Language for Modern ML
Julia: A modern language for modern ML Dr. Viral Shah and Dr. Simon Byrne www.juliacomputing.com What we do: Modernize Technical Computing Today’s technical computing landscape: • Develop new learning algorithms • Run them in parallel on large datasets • Leverage accelerators like GPUs, Xeon Phis • Embed into intelligent products “Business as usual” will simply not do! General Micro-benchmarks: Julia performs almost as fast as C • 10X faster than Python • 100X faster than R & MATLAB Performance benchmark relative to C. A value of 1 means as fast as C. Lower values are better. A real application: Gillespie simulations in systems biology 745x faster than R • Gillespie simulations are used in the field of drug discovery. • Also used for simulations of epidemiological models to study disease propagation • Julia package (Gillespie.jl) is the state of the art in Gillespie simulations • https://github.com/openjournals/joss- papers/blob/master/joss.00042/10.21105.joss.00042.pdf Implementation Time per simulation (ms) R (GillespieSSA) 894.25 R (handcoded) 1087.94 Rcpp (handcoded) 1.31 Julia (Gillespie.jl) 3.99 Julia (Gillespie.jl, passing object) 1.78 Julia (handcoded) 1.2 Those who convert ideas to products fastest will win Computer Quants develop Scientists prepare algorithms The last 25 years for production (Python, R, SAS, DEPLOY (C++, C#, Java) Matlab) Quants and Computer Compress the Scientists DEPLOY innovation cycle collaborate on one platform - JULIA with Julia Julia offers competitive advantages to its users Julia is poised to become one of the Thank you for Julia. Yo u ' v e k i n d l ed leading tools deployed by developers serious excitement. -
Treball (1.484Mb)
Treball Final de Màster MÀSTER EN ENGINYERIA INFORMÀTICA Escola Politècnica Superior Universitat de Lleida Mòdul d’Optimització per a Recursos del Transport Adrià Vall-llaura Salas Tutors: Antonio Llubes, Josep Lluís Lérida Data: Juny 2017 Pròleg Aquest projecte s’ha desenvolupat per donar solució a un problema de l’ordre del dia d’una empresa de transports. Es basa en el disseny i implementació d’un model matemàtic que ha de permetre optimitzar i automatitzar el sistema de planificació de viatges de l’empresa. Per tal de poder implementar l’algoritme s’han hagut de crear diversos mòduls que extreuen les dades del sistema ERP, les tracten, les envien a un servei web (REST) i aquest retorna un emparellament òptim entre els vehicles de l’empresa i les ordres dels clients. La primera fase del projecte, la teòrica, ha estat llarga en comparació amb les altres. En aquesta fase s’ha estudiat l’estat de l’art en la matèria i s’han repassat molts dels models més importants relacionats amb el transport per comprendre’n les seves particularitats. Amb els conceptes ben estudiats, s’ha procedit a desenvolupar un nou model matemàtic adaptat a les necessitats de la lògica de negoci de l’empresa de transports objecte d’aquest treball. Posteriorment s’ha passat a la fase d’implementació dels mòduls. En aquesta fase m’he trobat amb diferents limitacions tecnològiques degudes a l’antiguitat de l’ERP i a l’ús del sistema operatiu Windows. També han sorgit diferents problemes de rendiment que m’han fet redissenyar l’extracció de dades de l’ERP, el càlcul de distàncies i el mòdul d’optimització. -
Benchmarks for Current Linear and Mixed Integer Optimization Solvers
ACTA UNIVERSITATIS AGRICULTURAE ET SILVICULTURAE MENDELIANAE BRUNENSIS Volume 63 207 Number 6, 2015 http://dx.doi.org/10.11118/actaun201563061923 BENCHMARKS FOR CURRENT LINEAR AND MIXED INTEGER OPTIMIZATION SOLVERS Josef Jablonský1 1 Department of Econometrics, Faculty of Informatics and Statistics, University of Economics, Prague, nám. W. Churchilla 4, 130 67 Praha 3, Czech Republic Abstract JABLONSKÝ JOSEF. 2015. Benchmarks for Current Linear and Mixed Integer Optimization Solvers. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 63(6): 1923–1928. Linear programming (LP) and mixed integer linear programming (MILP) problems belong among very important class of problems that fi nd their applications in various managerial consequences. The aim of the paper is to discuss computational performance of current optimization packages for solving large scale LP and MILP optimization problems. Current market with LP and MILP solvers is quite extensive. Probably among the most powerful solvers GUROBI 6.0, IBM ILOG CPLEX 12.6.1, and XPRESS Optimizer 27.01 belong. Their attractiveness for academic research is given, except their computational performance, by their free availability for academic purposes. The solvers are tested on the set of selected problems from MIPLIB 2010 library that contains 361 test instances of diff erent hardness (easy, hard, and not solved). Keywords: benchmark, linear programming, mixed integer linear programming, optimization, solver INTRODUCTION with integer variables need not be solved even Solving linear and mixed integer linear in case of a very small size of the given problem. optimization problems (LP and MILP) that Real-world optimization problems have usually belong to one of the most o en modelling tools, many thousands of variables and/or constraints. -
Computational Aspects of Infeasibility Analysis in Mixed Integer Programming
Takustr. 7 Zuse Institute Berlin 14195 Berlin Germany JAKOB WITZIG TIMO BERTHOLD STEFAN HEINZ Computational Aspects of Infeasibility Analysis in Mixed Integer Programming ZIB Report 19-54 (November 2019) Zuse Institute Berlin Takustr. 7 14195 Berlin Germany Telephone: +49 30-84185-0 Telefax: +49 30-84185-125 E-mail: [email protected] URL: http://www.zib.de ZIB-Report (Print) ISSN 1438-0064 ZIB-Report (Internet) ISSN 2192-7782 Computational Aspects of Infeasibility Analysis in Mixed Integer Programming Jakob Witzig,1 Timo Berthold,2 and Stefan Heinz3 1Zuse Institute Berlin, Takustr. 7, 14195 Berlin, Germany [email protected] 2Fair Isaac Germany GmbH, Stubenwald-Allee 19, 64625 Bensheim, Germany [email protected] 3Gurobi GmbH, Ulmenstr. 37–39, 60325 Frankfurt am Main, Germany [email protected] November 6, 2019 Abstract The analysis of infeasible subproblems plays an important role in solv- ing mixed integer programs (MIPs) and is implemented in most major MIP solvers. There are two fundamentally different concepts to gener- ate valid global constraints from infeasible subproblems. The first is to analyze the sequence of implications, obtained by domain propagation, that led to infeasibility. The result of this analysis is one or more sets of contradicting variable bounds from which so-called conflict constraints can be generated. This concept is called conflict graph analysis and has its origin in solving satisfiability problems and is similarly used in con- straint programming. The second concept is to analyze infeasible linear programming (LP) relaxations. Every ray of the dual LP provides a set of multipliers that can be used to generate a single new globally valid linear constraint. -
AMPL Academic Price List These Prices Apply to Purchases by Degree-Awarding Institutions for Use in Noncommercial Teaching and Research Activities
AMPL Optimization Inc. 211 Hope Street #339 Mountain View, CA 94041, U.S.A. [email protected] — www.ampl.com +1 773-336-AMPL (-2675) AMPL Academic Price List These prices apply to purchases by degree-awarding institutions for use in noncommercial teaching and research activities. Products covered by academic prices are full-featured and have no arbitrary limits on problem size. Single Floating AMPL $400 $600 Linear/quadratic solvers: CPLEX free 1-year licenses available: see below Gurobi free 1-year licenses available: see below Xpress free 1-year licenses available: see below Nonlinear solvers: Artelys Knitro $400 $600 CONOPT $400 $600 LOQO $300 $450 MINOS $300 $450 SNOPT $320 $480 Alternative solvers: BARON $400 $600 LGO $200 $300 LINDO Global $700 $950 . Basic $400 $600 (limited to 3200 nonlinear variables) Web-based collaborative environment: QuanDec $1400 $2100 AMPL prices are for the AMPL modeling language and system, including the AMPL command-line and IDE development tools and the AMPL API programming libraries. To make use of AMPL it is necessary to also obtain at least one solver having an AMPL interface. Solvers may be obtained from us or from another source. As listed above, we offer many popular solvers for direct purchase; refer to www.ampl.com/products/solvers/solvers-we-sell/ to learn more, including problem types supported and methods used. Our prices for these solvers apply to the versions that incorporate an AMPL interface; a previously or concurrently purchased copy of the AMPL software is needed to use these versions. Programming libraries and other forms of these solvers are not included. -
MP-Opt-Model User's Manual, Version
MP-Opt-Model User's Manual Version 2.1 Ray D. Zimmerman August 25, 2020 © 2020 Power Systems Engineering Research Center (PSerc) All Rights Reserved Contents 1 Introduction6 1.1 Background................................6 1.2 License and Terms of Use........................7 1.3 Citing MP-Opt-Model..........................8 1.4 MP-Opt-Model Development.......................8 2 Getting Started9 2.1 System Requirements...........................9 2.2 Installation................................9 2.3 Sample Usage............................... 10 2.4 Documentation.............................. 14 3 MP-Opt-Model { Overview 15 4 Solver Interface Functions 16 4.1 LP/QP Solvers { qps master ...................... 16 4.1.1 QP Example............................ 19 4.2 MILP/MIQP Solvers { miqps master .................. 20 4.2.1 MILP Example.......................... 22 4.3 NLP Solvers { nlps master ....................... 22 4.3.1 NLP Example 1.......................... 25 4.3.2 NLP Example 2.......................... 26 4.4 Nonlinear Equation Solvers { nleqs master .............. 29 4.4.1 NLEQ Example 1......................... 31 4.4.2 NLEQ Example 2......................... 34 5 Optimization Model Class { opt model 38 5.1 Adding Variables............................. 38 5.1.1 Variable Subsets......................... 39 5.2 Adding Constraints............................ 40 5.2.1 Linear Constraints........................ 40 5.2.2 General Nonlinear Constraints.................. 41 5.3 Adding Costs............................... 42 5.3.1 Quadratic -
FICO Xpress Optimization Suite Webinar
FICO Xpress Optimization Suite Webinar Oliver Bastert Senior Manager Xpress Product Management September 22 2011 Confidential. This presentation is provided for the recipient only and cannot be reproduced or shared without Fair Isaac Corporation's express consent. 1 © 2011 Fair Isaac Corporation. Agenda » Introduction to FICO » Introduction to FICO Xpress Optimization Suite » Performance » Distributed Modelling and Solving » Case Q&A 2 © 2011 Fair Isaac Corporation. Confidential.© 2011 Fair Isaac Corporation. Confidential. Introduction to FICO 3 © 2011 Fair Isaac Corporation. Confidential. FICO Snapshot The leader in predictive analytics for decision management Founded: 1956 Profile NYSE: FICO Revenues: $605 million (fiscal 2010) Scores and related analytic models Products Analytic applications for risk management, fraud, marketing and Services Tools for decision management Clients and 5,000+ clients in 80 countries Markets Industry focus: Banking, insurance, retail, health care #1 in services operations analytics (IDC) Recent #7 in worldwide business analytics software (IDC) Rankings #26 in the FinTech 100 (American Banker) 20+ offices worldwide, HQ in Minneapolis, USA Offices 2,200 employees Regional Hubs: San Rafael (CA), New York, London, Birmingham (UK), Munich, Madrid, Sao Paulo, Bangalore, Beijing, Singapore 4 © 2011 Fair Isaac Corporation. Confidential. FICO delivers superior predictive analytic solutions that drive smarter decisions. Thousands of businesses worldwide, including 9 of the top Fortune 10, rely on FICO to make every -
Technical Program
TECHNICAL PROGRAM Wednesday, 9:00-10:30 Wednesday, 11:00-12:40 WA-01 WB-01 Wednesday, 9:00-10:30 - 1a. Europe a Wednesday, 11:00-12:40 - 1a. Europe a Opening session - Plenary I. Ljubic Planning and Operating Metropolitan Passenger Transport Networks Stream: Plenaries and Semi-Plenaries Invited session Stream: Traffic, Mobility and Passenger Transportation Chair: Bernard Fortz Invited session Chair: Oded Cats 1 - From Game Theory to Graph Theory: A Bilevel Jour- ney 1 - Frequency and Vehicle Capacity Determination using Ivana Ljubic a Dynamic Transit Assignment Model In bilevel optimization there are two decision makers, commonly de- Oded Cats noted as the leader and the follower, and decisions are made in a hier- The determination of frequencies and vehicle capacities is a crucial archical manner: the leader makes the first move, and then the follower tactical decision when planning public transport services. All meth- reacts optimally to the leader’s action. It is assumed that the leader can ods developed so far use static assignment approaches which assume anticipate the decisions of the follower, hence the leader optimization average and perfectly reliable supply conditions. The objective of this task is a nested optimization problem that takes into consideration the study is to determine frequency and vehicle capacity at the network- follower’s response. level while accounting for the impact of service variations on users In this talk we focus on new branch-and-cut (B&C) algorithms for and operator costs. To this end, we propose a simulation-based op- dealing with mixed-integer bilevel linear programs (MIBLPs). -
Quadratic Programming Models in Strategic Sourcing Optimization
IT 17 034 Examensarbete 15 hp Juni 2017 Quadratic Programming Models in Strategic Sourcing Optimization Daniel Ahlbom Institutionen för informationsteknologi Department of Information Technology Abstract Quadratic Programming Models in Strategic Sourcing Optimization Daniel Ahlbom Teknisk- naturvetenskaplig fakultet UTH-enheten Strategic sourcing allows for optimizing purchases on a large scale. Depending on the requirements of the client and the offers provided for Besöksadress: them, finding an optimal or even a near-optimal solution can become Ångströmlaboratoriet Lägerhyddsvägen 1 computationally hard. Mixed integer programming (MIP), where the Hus 4, Plan 0 problem is modeled as a set of linear expressions with an objective function for which an optimal solution results in a minimum objective Postadress: value, is particularly suitable for finding competitive results. Box 536 751 21 Uppsala However, given the research and improvements continually being made for quadratic programming (QP), which allows for objective functions with Telefon: quadratic expressions as well, comparing runtimes and objective values 018 – 471 30 03 for finding optimal and approximate solutions is advised: for hard Telefax: problems, applying the correct methods may decrease runtimes by several 018 – 471 30 00 orders of magnitude. In this report, comparisons between MIP and QP models used in four different problems with three different solvers Hemsida: were made, measuring both optimization and approximation performance in http://www.teknat.uu.se/student terms of runtimes and objective values. Experiments showed that while QP holds an advantage over MIP in some cases, it is not consistently efficient enough to provide a significant improvement in comparison with, for example, using a different solver.