Product Catalog & Price List

Total Page：16

File Type：pdf, Size：1020Kb

Product Catalog & Price List My Cable Mart, LLC currently has over 3,146 unique skus providing for connectivity products for all your low voltage needs. We have hundreds of HDMI products (cables, adapters, splitters, switches), thousands of adapters, ethernet cables, bulk boxed cables, and TV mounts. Our product catalog is "generated" once per month, and is provided as a PDF download from our website. Each day, new products are added, and some are discontinued. My Cable Mart, LLC 6224 Bury Dr Minneapolis, MN 55346 P. 952-486-8736 F. 952-937.0469 MyCableMart.com Pricing in our catalog is shown for "quantity 1". We offer discounted pricing for different quantity breaks (or tiers). Certain products will have higher quantity discounts compared to others. You can easily calculate final pricing for larger quantities by checking the "Tier Letter" (A, B, C, or D) and using the pricing tables below. Your final price may be different due to rounding. Products marked with an (X) do not have discounted pricing available. Should pricing differ in this catalog, pricing on our website shall be considered correct. Pricing is always subject to change Quantity Price Breaks Tier A Tier B Tier C Tier D Quantity Discount % Discount % Discount % Discount % 2 - 5 3.0 5.0 7.0 10.0 6 - 10 4.8 8.5 12.0 15.7 11 - 30 11.0 11.0 16.0 20.5 31 - 50 13.6 13.6 19.0 24.0 51 - 100 15.0 15.0 21.0 26.4 101 - 200 16.0 16.0 22.4 28.0 201+ 17.0 17.0 23.4 29.5 ⊗ = Special Order Item. Item is generally NOT a stock item, and is a special order. Prices all in USD$ and valid as of 07/07/21 Copyright © My Cable Mart, LLC Table of Contents HDMI Products - HDMI Products (All) . 7 HDMI Fiber Optic Cables . 7 HDMI Extension Cables . 8 Micro HDMI Cables and Adapters (Type D) . 8 Mini HDMI Cables and Adapters . 9 Display Port/Mini-Display Port to HDMI . 10 HDMI over Ethernet and Wireless . 10 HDMI / DVI Combo Cables . 10 Type C USB to HDMI Cables and Adapters . 11 HDMI and DVI Adapters/Gender Changers . 12 HDMI Cables - by LENGTH . 14 8in to 1.5ft HDMI . 14 3ft HDMI . 14 6 - 8ft HDMI . 15 10 - 12ft HDMI . 15 15ft HDMI . 16 20ft HDMI . 16 25ft HDMI . 16 30ft HDMI . 16 35ft HDMI . 16 40 - 45ft HDMI . 17 50ft HDMI . 17 60 - 65ft HDMI . 17 75 - 85ft HDMI . 17 100ft and Longer HDMI . 18 HDMI Products - 8K HDMI Cables . 19 HDMI Products - Over CAT5/6 & Wireless . 19 HDMI Switch / Splitter - HDMI Switches . 20 HDMI Switch / Splitter - HDMI Splitters . 20 HDMI Switch / Splitter - HDMI Matrix Box . 21 HDMI Accessory - Repeaters & Boosters . 21 HDMI Accessory - Infra-Red (IR) . 22 HDMI Accessory - Over CAT5/6 & Wireless . 22 Video Cables - BNC Video / Security . 23 Video Cables - Coax / RG6 . 25 Video Cables - Composite Video 3-RCA . ..

162

Copy Link

Recommended publications

XO2 and XO3: Low Jitter CD Clock Oscillators
Mounting instructions for: XO2 and XO3: low jitter CD clock oscillators Congratulations! You just bought a high quality, low jitter master clock oscillator. This document gives guidance to mounting and connecting it in your CD player. Introduction XO2 and XO3 are equal, except the reclocking option for XO3. XO2 and XO3 S Need to be supplied from a DC voltage of 9 to 35V, approximately 30mA. S Generate a new clock, which needs to be fed to the input of the original oscillator XO3 additionally needs: S to be fed with the original SPDIF signal (generated by the decoder chip) S the newly generated SPDIF signal to be connected to the original, or new digital output Mounting Mounting your XO is not that difficult. However some experience is needed to: S recognise and locate components S find specific connections and IC pin numbers S measure voltages using a multimeter S careful soldering of small parts If you feel lack of skills and or experience in some of the above listed subjects, please ask someone else to support you. Know your connections What is on the PCB XO, heart of the circuit Low noise adjustment - do not touch ! Supply (9-35Vdc/30 mA) SPDIF in Clock out SPDIF outputs The supply and SPDIF in (XO3 only) and clock out (XO2 and XO3) are already equipped with wiring. The supply wire may be extended using normal gauge wire, the others may not. If longer wiring is required, the use of coax is advised. Please contact me. Guido Tent can be contacted for questions and orders at: [email protected] 1 How to connect XO2 or XO3 in your player General Read these full instructions below, before starting any work.
[Show full text]
Connector Theory and Application Connector Theory and Application a Guide to Connection Design and Specification
Connector Theory and Application Connector Theory and Application A Guide to Connection Design and Specification Revised 5th Edition Authored by: GARY DITROIA IEEE MEMBER BURNDY LLC 47 East Industrial Park Drive Manchester, NH 03109 USA RONALD LAI IEEE Life Senior Member ASME Life Member SAE Life Member Consultant to BURNDY LLC KENNETH WOO BURNDY LLC 47 East Industrial Park Drive Manchester, NH 03109 USA GAYLORD ZAHLMAN BURNDY LLC 47 East Industrial Park Drive Manchester, NH 03109 USA Connector Theory and Application - A Guide to Connection Design and Specification - Revised 5th Edition - 2 © BURNDY LLC, 2018 All rights reserved. Abstracting is permitted with credit to the source. Table of Contents Introduction 1.0 Theory of Connector Technology 1.1 Grounding (Earthing) and Bonding 1.1.1 Corrosion 1.1.2 Fault Current 1.1.3 Special Grounding Applications 1.1.4 Ground Connection Design 1.2 Substation 1.2.1 Distribution Substations 1.2.2 Conductors 1.2.3 Substation Connector Design 1.3 Underground Distribution 1.3.1 Design Objectives 1.3.2 Underground Secondary Networks 1.3.3 Special Considerations 1.3.4 Network Protection 1.4 Overhead 1.4.1 Thermal Expansion and Contraction 1.4.2 Mechanical Integrity 1.4.3 Dielectric Fundamentals 1.4.4 Corrosion 1.4.5 Performance Testing (ANSI C119.4) 1.5 Service Entrance 1.5.1 Secondary Conductor 1.5.2 Service Connectors 1.6 Telecommunication 1.6.1 Telecommunication Conductors 1.6.2 Telecommunication Connections 2.0 Connector Functions and Types 2.1 Functions 2.1.1 Tap 2.1.2 Terminal 2.1.3 Splice 2.2 Types of Connectors 2.2.1 Mechanical Connectors Connector Theory and Application - A Guide to Connection Design and Specification - Revised 5th Edition - © BURNDY LLC, 2018 All rights reserved.
[Show full text]
Melni Bd-2Hls the Smarter Crimpless Connector
MELNI BD-2HLS THE SMARTER CRIMPLESS CONNECTOR. Setting A New Standard In The Electrical Industry. 1. Acquire all components, 2. Insert conductor into 3. Tighten nut to value on label. attach BD-2HLS to paddle. the BD-2HLS. 847.325.7825 OR VISIT WWW.REMKE.COM/MELNI MELNI BD-2HLS THE SMARTER CRIMPLESS CONNECTOR. Traditional electrical connector methodology is based on crimping, using a device to conjoin two pieces of metal by deforming one or both of them in a way that causes them to hold to each other. This requires multiple lugs and specialized dyes, each one manufactured for a specific cable size. The process is lengthy and intricate, requiring precise tools to secure the connection, such as hydraulic or mechanical crimps that are expensive and hard on the installer’s back and shoulders. Though this practice is time consuming, expensive and hazardous, it has been the accepted process for years. But all it takes is one idea to change everything. Introducing the BD-2HLS Melni Crimpless Connector. The BD-2HLS is a mechanical connector that can replace existing commercial mechanical and crimp-style connectors. Its crimpless installation design and spiral insert technology simplifies the connection process making it safer, easier and less expensive. A revolutionary innovation, the BD-2HLS is redefining the electrical industry. While traditional 2-hole lugs are non-range taking, the Melni BD-2HLS accepts anything between 2/0 AWG and #2AWG, spanning a large range of cable and wire sizes, and drastically reducing installation time. The BD-2HLS is all that’s required for a variety of electrical applications - having multiple lug sizes and specialized dies on hand just isn’t necessary anymore.
[Show full text]
Cisco Telepresence System Codec C90 Physical Interface Guide
Cisco TelePresence System Codec C90 Physical interface guide TC software FEBRUARY 2014 The Physical Interface Guide Cisco Telepresence System Codec C90 D14644.04 Codec C90 Physical Interface Guide | February 2014. © 2014 Cisco Systems, Inc. All rights reserved. 1 www.cisco.com Cisco TelePresence System Codec C90 Physical interface guide TA - ToC - Table of Contents What’sHidden text in anchor Introduction Video outputs .....................................................................14 this guide? HDMI 1 and 3 ..................................................................14 About this guide .................................................................. 4 DVI-I 2 and 4 ..................................................................14 The top menu bar and the entries in the Table of User documentation ........................................................ 4 Composite 5 ...................................................................14 Software download ......................................................... 4 Contents are all hyperlinks, just click on them to Video output formats ......................................................14 go to the topic. 2 x HDMI and 2 x DVI-I outputs, supported formats ..14 Connecting to the codec 1 x Composite output, supported formats .................14 Basic setup when connecting to Codec C90 ..................... 6 Levels .............................................................................14 We recommend you visit our web site regularly for updated versions of the user
[Show full text]
IEEE Paper Template in A4
Volume 6, Issue 2, February 2016 ISSN: 2277 128X International Journal of Advanced Research in Computer Science and Software Engineering Research Paper Available online at: www.ijarcsse.com A Review Paper on Cable Connectors Jhankar Tyagi Guest Faculty, Shaheed Sukhdev College of Business Studies, Delhi University, Delhi, India Abstract— This paper is an attempt to give a basic knowledge of cable connectors to the user. Keywords— Cable glands, RJ 45 Connector, Banana Connector, BNC Connector, XLR Connector I. INTRODUCTION An electrical connector is an electro-mechanical device for joining electrical circuits as an interface using a mechanical assembly. Connectors consist of plugs (male-ended) and jacks (female-ended). In computing, an electrical connector can also be known as a physical interface. II. PROPERTIES OF CONNECTORS Electrical connectors are characterized by their pin out and physical construction, ruggedness and resistance to vibration, resistance to entry of water or other contaminants, resistance to pressure, lifetime .They may be keyed to prevent insertion in the wrong orientation. It is usually desirable for a connector to be easy to identify visually, rapid to assemble, and be inexpensive .No single connector has all the ideal properties. Cable Glands: Cable glands known as cable connectors, connect wires to devices mechanically rather than electrically and are distinct from quick-disconnects .They are mechanical cable entry devices and can be constructed from metallic or non-metallic materials. They are used in conjunction with cable and wiring used in electrical instrumentation and automation systems. They are used as a ceiling and a termination device to insure that the characteristic of the enclosure which the cable enters can be contained adequately.
[Show full text]
Datapath-Fx4 Spec Sheet
Fx4 One box. Four outputs. Millions of possibilities. HIGH PERFORMANCE CONTROLLER FEATURES Advancements in digital signage allow much greater freedom in creating Infinite creative configurations and deploying any scale signage projects. At the forefront of this is the UHD / 4K60 input, four HD 1080p outputs Datapath Fx4, a multi-faceted stand alone display controller. The Fx4 Rotates, crops, scales, mirrors and bezel corrects supports a choice of inputs, high bandwidth loop-through as well as 4 genlocked outputs in either DisplayPort or HDMI. Multiple inputs for flexible connectivity (Dual HDMI1.4 or single DisplayPort1.2 inputs) The Fx4 features a DisplayPort1.2 main input alongside two HDMI1.4 inputs HDCP1.4 support on all inputs and outputs offering 4K 4096 x 2160p at 60fps. The intuitive user interface allows users to determine which input is used. True stand-alone operation: Fx4 can adapt to changes in inputs by adjusting all scale factors Network or USB interfaces allow platform independent control (MAC OSX 10.6 & later) Pre-load an image for use when signal is not detected Engineering the world’s best visual solutions Next generation display wall controller ADDITIONAL FEATURES WALL DESIGNER Each output monitor can take its input from any region of the input image Datapath’s hugely popular multi-screen design tool, Wall Designer has also as all of the required cropping, scaling, rotation and frame-rate conversion been updated to incorporate Fx4. Wall Designer allows users to add displays is handled by the Fx4 hardware. These regions can overlap to allow any from the ever expanding database of monitors, visualise their content by output to replicate another or can be configured to support any creative adding inputs and adjusting display regions and finally instantly program splice of the source material.
[Show full text]
HP Switch Zl2 Modules Installation Guide
HP Switch zl2 Modules Installation Guide Part Number: 5998-5076a Published: July 2016 Edition: 2 © Copyright 2014, 2016 Hewlett Packard Enterprise Development LP The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein. Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard Enterprise has no control over and is not responsible for information outside the Hewlett Packard Enterprise website. Acknowledgments Intel®, Itanium®, Pentium®, Intel Inside®, and the Intel Inside logo are trademarks of Intel Corporation in the United States and other countries. Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Adobe® and Acrobat® are trademarks of Adobe Systems Incorporated. Java® and Oracle® are registered trademarks of
[Show full text]
S-311-P-626/02
REVISIONS SYMBOL DESCRIPTION DATE APPROVAL - Original Issue 7/30/n ~ SHEET REVISION STATUS SH I 2 3 4 5 6 7 8 9 10 II 12 13 14 15 16 17 18 19 20 REV --- -- - - - SH 2 1 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 REV ORIGINATOR: DA~ FSC: 5935 J. Plante/Swales R pace fJ\J~fk-~ }hll 91 Connector Adapter, Electric, Miniature D TECHNICAL REVT~ ./~ T. R. Duffy/Unisys . -r/ef}431 Rectangular, Polari zed Shell, Standard and High CODE3IJAPPROVa~ ' ~~ Density, Electromagnetic J. M. Lohr/GSFC r / 7/1-1('17 Interference Filter Contacts CODE 311 SUPERVI'soR'y APPR~: ~ R. L. Chinnapongse/GSFC --;z. /' 7~r)? ADDITIONAL APPROVAL: z S-311-P-626/02 Oscar GonzalezJGSFC Code 738 L/~l 7/ rjj'J NATIONAL "RONAm;~m AO,",,"TRAT<ON GODDARD SPACE FLIGHT NTER GREENBELT, MARYLAND 0771 CAGE CODE: 25306 Page 1 of8 I 1. SCOPE 1.1 Purpose. This specification covers the detail provisions for D type EMI filter pin/socket connector adapters having multiple non-removable contacts. These connectors are for use in space flight hardware and critical ground support equipment (GSE) applications. 1.2 GSFC General Specification. Unless otherwise noted, all provisions of GSFC specification S-311-P-626 apply to this specification. 1.3 Connector Type Designation. The connector type designation shall be as follows: G311P626 / 02 Y ZZ U I I I I I I I I I Revision (if any) I I I Size and Type (1.3.3) I I Residual Magnetism (1.3.2) I Part Type (1.3.1) GSFC Designator 1.3.1 Part Type.
[Show full text]
HDMI/DVI-D SDI Converter/Extender
HDMI/DVI-D SDI Converter/Extender User Manual English No. 38196 - 3G SDI to DVI-D No. 38197 - DVI-D to 3G SDI No. 38198 - 3G SDI to HDMI No. 38199 - HDMI to 3G SDI www.LINDY.com © LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (July 2012) English User Manual Introduction Thank you for buying one of the products from the LINDY HDMI/DVI-D SDI Converter/Extender range. This range of products gives you the ability to integrate SDI and DVI-D/HDMI equipment or when used in combination, extend DVI-D or HDMI signals up to 100m using low cost coaxial cable. This hardware based solution is ideal for professional use to extend DVI-D or HDMI signals over coaxial cable, display SDI signals on DVI-D/HDMI displays or DVI-D/HDMI signals on SDI displays. Auto-video mode detection for SD/HD/3G and Plug & Play installation make for a simple setup; with the added functionality of being able to use either internal or external audio sources at the flick of switch. Features • Convert SDI signals for use with DVI-D/HDMI displays or DVI-D/HDMI signals with SDI displays. • Automatic video mode detection (3G/SD/HD) • Integrated audio de-embedding for a maximum of 8 channels of 48 kHz audio • Supports input SDI signal transmission distances up to 300m for SD signals / up to 200m for HD signals / up to 100m for 3G signals • Supports SMPTE standards 259M-C, at bitrates of 270 Mbit/s, SMPTE 292M, at bitrates of 1.485 Gbit/s or 1.485/1.001 Gbit/s, 424M/425M-AB, at bitrates of 2.970 Gbit/s and 2.970/1.001 Gbit/s • Up to 100m HDMI/DVI-D signal extension
[Show full text]
Types of BNC Connectors
Types of BNC Connectors The BNC (Bayonet Neill–Concelman) connector is a miniature quick connect / disconnect radio frequency connector used for coaxial cable. It features two bayonet lugs on the female connector; mating is fully achieved with a quarter turn of the coupling nut. BNC connectors are most commonly made in 50 ohm and 75 ohm versions, matched for use with cables of the same characteristic impedance. The 75 ohm connector is dimensionally slightly different from the 50 ohm variant, but the two nevertheless can be made to mate. The 75 ohm types can sometimes be recognized by the reduced or absent dielectric in the mating ends but this is by no means reliable. There was a proposal in the early 1970s for the dielectric material to be coloured red in 75 ohm connectors, and while this is occasionally implemented, it did not become standard. The 75 ohm connectors are typically specified for use at frequencies up to 2 GHz. 75 ohm BNC connectors are primarily used in Video (particularly HD video signals) and DS3 Telco central office applications. Many VHF receivers use 75 ohm antenna inputs, so they often used 75 ohm BNC connectors. The 50 ohm connectors are typically specified for use at frequencies up to 4 GHz. 50 ohm connectors are used for data and RF. A 95 ohm variant is used within the aerospace sector, but rarely elsewhere. It is used with the 95 ohm video connections for glass cockpit displays on some aircraft. Compatibility The different versions are designed to mate with each other, and a 75 ohm and a 50 ohm BNC connector which both comply with the 1978 standard, IEC 169-8, will mate non-destructively.
[Show full text]
Neptune Series 2 Ports 10/100/1000Base-T/1000Base-SX
FACILITATINGFacilitating SECURE SecureCOMMUNICATIONS Communications IN HARSH ENVIRONMENTS in Harsh Environments Neptune Series Gigabit Ethernet, External M28876, 1000Base-T / SX Media Converter, 28Vdc, Multimode, 850nm Dual Port, Flange Receptacles M28876 to D38999 / Optical to Electrical Media Converter FEATURES DESCRIPTION • Compliant with IEEE-802.3:2005 Gigabit Ethernet Neptune series Gigabit Ethernet media converters consist of • Optical fi ber link distances up to 550 Meters optoelectronic transmitter and receiver functions integrated • Maximum optical channel bit error rate less than 1x10-12 along with the 1000Base-T Ethernet electrical to 1000Base- • Operating temperature range from -40°C to +85°C SX optical media conversion circuitry into a wall mounted • Shock, vibration and immersion resistant per Mil-Std-810 M28876 connector assembly. and Mil-Std-1344 • Olive Drab Cadmium over Aluminum meets stringent The optical transmitters are high output 850nm VCSEL’s. EMI / RFI performance specifi cations The optical receivers consist of GaAs PIN and preamplifi er • Aluminum housing, M28876 and Mil-Dtl-38999 assemblies and limiting post-amplifi ers. connectors are strong, durable and corrosion resistant • M28876 compliant optical fi ber connector interface The electrical signal interface to the Neptune series optical • D38999 Quadrax electrical signal interfaces provide robust media converters is a Mil-Dtl-38999 Quadrax connector enabling interconnection to vehicle or shelter cabling interconnection to an internal or external backbone cable interface. The electrical power interface to the Neptune series bulkhead APPLICATIONS optical media converters is a Mil-Dtl-38999 electrical connector Neptune series bulkhead mounted Gigabit Ethernet media enabling interconnection to a vehicle or shelter power supply. converters enable high speed network communications over long distances in harsh environments.
[Show full text]
Experiment Number: 01 Title: Setup a Wired
Computer Networks Lab T.E. Computer Experiment Number: 01 Title: Setup a wired LAN PROBLEM STATEMENT Setup a wired LAN using Layer 2 Switch and then IP switch of minimum four computers. It includes preparation of cable, testing of cable using line tester, configuration machine using IP addresses, testing using PING utility and demonstrate the PING packets captured traces using Wireshark Packet Analyzer Tool. OBJECTIVES: 1. To understand the structure and working of various networks including the interconnecting devices used in them. 2. To get hands on experience of making and testing cables TYPES OF NETWORK Common examples of area network types are: LAN - Local Area Network WLAN - Wireless Local Area Network WAN - Wide Area Network MAN - Metropolitan Area Network SAN - Storage Area Network, System Area Network, Server Area Network, or sometimes Small Area Network CAN - Campus Area Network, Controller Area Network, or sometimes Cluster Area Network PAN - Personal Area Network DAN - Desk Area Network LAN - Local Area Network 1 Computer Networks Lab T.E. Computer A LAN connects network devices over a relatively short distance. A networked office building, school, or home usually contains a single LAN, though sometimes one building will contain a few small LANs (perhaps one per room), and occasionally a LAN will span a group of nearby buildings. MAN-Metropolitan Area Network A network spanning a physical area larger than a LAN but smaller than a WAN, such as a city. A MAN is typically owned and operated by a single entity such as a government body or large corporation. WAN - Wide Area Network As the term implies, a WAN spans a large physical distance.
[Show full text]