DYNA4 R5 - Supported Software and Hardware
R5 R5 SP1 R5 SP2
Operating Systems
Windows 10, 64 bit
Windows 7, 64 bit
Mathworks 1
MATLAB/Simulink R2020b
MATLAB/Simulink R2020a
MATLAB/Simulink R2019b
MATLAB/Simulink R2019a
MATLAB/Simulink R2018b
MATLAB/Simulink R2018a
MATLAB/Simulink R2017b
Vector CANoe Desktop Operation 2
CANoe 14
CANoe 13.0
CANoe 12.0
CANoe 11.0
Vector CANoe with VN89xx and VT60xx Systems 2, 3
CANoe 14
CANoe 13.0
CANoe 12.0 SP3
ADTF
ADTF 2.x win64_vc100
ADTF 2.x linux64
dSPACE 4 Scalexio, DS1006 5 and DS1007 5
dSPACE R2020-A
dSPACE R2019-B
dSPACE R2019-A
dSPACE R2018-B
dSPACE R2018-A
dSPACE R2017-B
ETAS Labcar
ETAS Labcar-Operator 5.4.9
FMU Export 6, 7
FMI Co-Simulation 2.0 Windows 64bit
FMI Co-Simulation 2.0 Windows 32bit
Vector KnowledgeBase, (Last Updated: 2020-12-16)
DYNA4 R5 - Supported Software and Hardware
R5 R5 SP1 R5 SP2
NI Windows-only 8
NI VeriStand 2020 R3
NI VeriStand 2020
NI VeriStand 2019 R3
NI Linux RT 8
NI VeriStand 2020 R3
NI VeriStand 2020
NI VeriStand 2019 R3
NI PXI real-time operating system Phar Lap ETS 9, 10, 11
NI VeriStand 2020 R3
NI VeriStand 2020
NI VeriStand 2019 R3
ROS (Robot Operating System)
ROS2
ROS1 through ROS Bridge
Other targets on demand, e.g.
Concurrent iHawk
expleo Messina HiL / SiL
Micronova NovaCarts / NovaSim
Mathworks Simulink Real-Time / Speedgoat
iSyst iSyTester
Opal-RT RT-Lab
Annotations
1 Accelerator, Rapid Accelerator mode and target build require a supported Microsoft Visual C/C++Compiler. Required version see: DYNA4 Installation Guides 2 In DYNA4 R 5.0 the matching MATLAB interface is required, from R5 SP1 on included 3 Extended Real-Time mode not supported 4 dSPACE XiL API has to be installed 5 OpenDRIVE roads and OSI not supported due to missing file system on DS1006 and DS1007 6 Supported compilers are MS Visual 2019 C/C++, MS Visual 2017 C/C++, MS Visual 2015 C/C++, MS Visual 2010 C/C++ 7 Not supported for MATLAB R2020b 8 Requires MATLAB R2017b due to VeriStand code generation problems with higher MATLAB versions 9 DYNA4 result data tracing not supported due to missing base operating system calls on Phar Lap ETS 10DYNA4 Traffic Modules not supported due to missing base operating system calls on Phar Lap ETS, required for OSI support 11Only in combination with Microsoft Visual 2010 C/C++ or Windows SDK v7.1 Compiler, therefore only with MATLAB 2017b
Vector KnowledgeBase, (Last Updated: 2020-12-16)