1 2 This catalogue is protected under the Spanish Intellectual Property Act (Royal Decree 1/1996). Any reproduction of its contents, In whole or in part, without the express consent of PORCELANOSA Grupo will be subject to punitive action under the Spanish Criminal Code.

3 4 IN DEX Decorative and technical profiles 6

Tile installation adhesives 10 6

Micro-stuk 12 0

Grouting material and elastic joint sealants 138

Substrate preparation products 154

Shower trays 160

Waterproofing 166

Raised floors 178

Tools 198

5 6 PROFILES AND SKIRTINGS

Decorative profiles

10 Light collection 20 Crystal colection 30 Elegance collection 32 Gold collection 34 Metal collection 60 Chrome collection 64 Pro-telo collection Skirtings

68 Pro-skirting LED 70 Pro-skirting 72 Pro-skirting PAR-KER 80 Pro-skirting Micro-stuk 82 Pro-plint Corner profiles and trims for wall tiles

86 Pro-mate 2 and skirtings Profiles 87 Pro-mate 3 88 Pro-mate 5 89 Pro-part Li 90 Pro-part 91 Pro-mate 45 92 Pro-corner 94 Perfiles XLIGHT Technical profiles

98 Pro-T 99 Pro-level 100 Pro-shower 101 Pro-sanit 102 Pro-dilata 104 Structural joints 105 Pro-step 7 8 Profiles and skirtings Profiles

Decorative profiles

9 Light collection

Decorative profile with integrated illumination. Luminescent range for ceramic coverings.

pro-light silver

10 Profiles and skirtings Profiles

pro-light anodized aluminum

pro-light silver 11mm-7/16’’ B72141363 100202237 27x11x2500 mm - 7/16”x8’ 2-1/2” Lighting system not included

11 Light collection

Decorative profile with integrated illumination. Luminescent range for ceramic coverings.

pro-light silver

12 Profiles and skirtings Profiles

pro-light pro-light black 7.5 mm - 9/32” B73141339 100243703 21x7.5x2500 mm - 13/16”x9/32”x8’ 2-1/2” pro-light silver 7.5 mm - 9/32” B73141341 100243677 21x7.5x2500 mm - 13/16”x9/32”x8’ 2-1/2” Lighting system not included

13 Light collection

Decorative profile with integrated illumination. Luminescent range for ceramic coverings.

pro-light silver

14 Profiles and skirtings Profiles

pro-corner light pro-corner light B73141340 100243678 16x16x2500 mm - 5/8”x5/8”x8’ 2-1/2” Lighting system not included

15 Light collection

Decorative profile with integrated illumination. Luminescent range for ceramic coverings.

pro-light silver

16 Profiles and skirtings Profiles

pro-part light pro-part light B73141342 100243710 12x10x2500 mm - 15/32”x3/8”x8’ 2-1/2” Lighting system not included

17 Light collection

Decorative profile with integrated illumination. Luminescent range for ceramic coverings.

pro-light silver

18 Profiles and skirtings Profiles

pro-mate 45 TOP light pro-corner light B73141343 100243649 22.5x22.5x2500 mm - 7/8”x7/8”x8’ 2-1/2” Lighting system not included

19 Crystal collection

High-end decorative profile for ceramic wall tiling, made with Swarovski crystals. Replaces the traditional decorative ceramic listellos by new design metallic lines.

pro-part Li crystal SW Galaxy

20 Profiles and skirtings Profiles

pro-part Li Crystal SW Galaxy Chromed brass profile. Made with Swarovski Elements

pro-part Li crystal galaxy 11 mm-7/16’’ B71342657 100171653 12x11x2500 mm - 15/32”x7/16”x8’ 2-1/2” Not recommended for walls in direct contact with water.

21 Crystal collection

High-end decorative profile for ceramic wall tiling, made with Swarovski crystals. Replaces the traditional decorative ceramic listellos by new design metallic lines.

pro-part Li Crystal rock SW Silver

22 pro-part Li Crystal rock SW Silver Chromed brass profile. Made with Swarovski Elements Profiles and skirtings Profiles

pro-part Li Crystal rock SW silver 11mm-7/16’’ B73141325 100130429 12x11x2500 mm - 15/32”x7/16”x8’ 2-1/2”

pro-part Li Crystal rock SW Graphite Brass profile with chrome finish. Made with Swarovski Elements

pro-part Li Crystal rock SW graphite 11mm-7/16’’ B73141326 100130428 12x11x2500 mm - 15/32”x7/16”x8’ 2-1/2” Not recommended for walls in direct contact with water.

23 Crystal collection

High-end decorative profile for ceramic wall tiling, made with Swarovski crystals. Replaces the traditional decorative ceramic listellos by new design metallic lines.

pro-part Li Crystal rock SW Sapphire

24 Profiles and skirtings Profiles

pro-part Crystal rock SW Sapphire Chromed brass profile. Made with Swarovski Elements

pro-part crystal rock sapphire 11mm-7/16’’ B71342690 100189102 8x11x2500 mm - 5/16”x7/16”x8’ 2-1/2” Not recommended for walls in direct contact with water.

25 Crystal collection

High-end decorative profile for ceramic wall tiling, made with Swarovski crystals. Replaces the traditional decorative ceramic listellos by new design metallic lines.

pro-part Li Crystal sand SW Silver

26 pro-part Li Crystal sand SW Gold 24 k gold plated. Made with Swarovski Elements Profiles and skirtings Profiles

pro-part Li crystal sand SW gold 11mm-7/16’’ B73141323 100130430 12x11x2500 mm - 15/32”x7/16”x8’ 2-1/2”

pro-part Li Crystal sand SW Silver Chromed brass profile. Made with Swarovski Elements

pro-part Li crystal sand SW silver 11mm-7/16’’ B73141322 100130431 12x11x2500 mm - 15/32”x7/16”x8’ 2-1/2” Not recommended for walls in direct contact with water.

27 Crystal collection

High-end decorative profile for ceramic wall tiling, made with Swarovski crystals. Replaces the traditional decorative ceramic listellos by new design metallic lines.

pro-part Crystal SW Gold

28 pro-part Crystal SW Gold 24 k gold plated. Made with Swarovski Elements Profiles and skirtings Profiles

pro-part crystal SW gold 11mm-7/16’’ B71342629 100155354 8x11x2500 mm - 5/16”x7/16”x8’ 2-1/2”

pro-part Crystal SW Silver Chromed brass profile. Made with Swarovski Elements

pro-part crystal SW silver 11mm-7/16’’ B71342631 100155356 8x11x2500 mm - 5/16”x7/16”x8’ 2-1/2” Not recommended for walls in direct contact with water.

29 Elegance collection

High-end decorative profile for ceramic wall tiling, made with Swarovski crystals. Replaces the traditional decorative ceramic listellos by new design metallic lines.

pro-part Li chromed brass SW 1500

30 pro-part Li Gold SW 1500 24 k gold plated. Made with Swarovski Elements Profiles and skirtings Profiles

pro-part Li gold SW 1500 11mm-7/16’’ B73141324 100130432 12x11x2500 mm - 15/32”x7/16”x8’ 2-1/2”

pro-part Li Chrome SW 1500 Chromed brass profile. Made with Swarovski Elements

pro-part Li chrome SW 1500 11mm -7/16’’ B71342597 100120372 12x11x2500 mm - 15/32”x7/16”x8’ 2-1/2” Not recommended for walls in direct contact with water.

31 Gold collection

High-end decorative profile for wall tiles, 24K gold plated. It substitutes the traditional ceramic frieze by a metallic line with an exclusive design.

pro-part Gold

32 pro-part Li Gold 24 carat gold plated profile. 11mm-7/16’’ and 12.5 mm-1/2’’ decorative trim.

pro-part Li gold 12.5mm-1/2’’ B71342578 100100762 13.5x12.5x2500 mm - 17/32”x1/2”x8’ 2-1/2” pro-part Li gold 11mm-7/16’’ B71342574 100100726 12x11x2500 mm - 15/32”x7/16”x8’ 2-1/2”

pro-part Gold 24 carat gold plated profile. 8 mm-5/16’’ decorative trim. Profiles and skirtings Profiles

pro-part gold 12.5mm-1/2’’ B71342575 100100725 8x12.5x2500 mm - 5/16”x1/2”x8’ 2-1/2” pro-part gold 11mm-7/16’’ B71342577 100100724 8x11x2500 mm - 5/16”x7/16”x8’ 2-1/2”

pro-mate 5 Gold 24 carat gold plated profile. 5 mm-13/64’’ decorative trim.

pro-mate 5 gold 12.5mm-1/2’’ B71342573 100100722 5x12.5x2500 mm - 3/16”x1/2”x8’ 2-1/2” pro-mate 5 gold 11mm -7/16’’ B71342572 100100721 5x11x2500 mm - 3/16”x7/16”x8’ 2-1/2” Not recommended for walls in direct contact with water.

33 Metal collection

Metallic finish decorative profiles for ceramic wall tiles. It substitutes the traditional ceramic frieze.

pro-part cast copper

34 pro-part rose Brass profile with metallic covering. 8 mm-5/16’’ decorative trim. Profiles and skirtings Profiles pro-part rose 7mm-9/32’’ B73141337 100232244 8x7x2500 mm - 5/16”x9/32”x8’ 2-1/2” pro-part rose 11mm-7/16” B73141336 100231592 8x11x2500 mm - 5/16”x7/16”x8’ 2-1/2” pro-part rose line Brass profile with metallic covering. 8 mm-5/16’’ decorative trim.

pro-part rose line 7mm-9/32’’ B73141338 100232236 8x7x2500 mm - 5/16”x9/32”x8’ 2-1/2” pro-part rose line 11mm-7/16” B73141335 100231584 8x11x2500 mm - 5/16”x7/16”x8’ 2-1/2”

35 Metal collection

Metallic finish decorative profiles for ceramic wall tiles. It substitutes the traditional ceramic frieze.

pro-part cast copper

36 Profiles and skirtings Profiles

pro-part cast copper Brass profile with metallic covering. 8 mm-5/16’’ decorative trim.

pro-part cast copper 11mm-7/16’’ B71342717 100223015 8x11x2500 mm - 5/16”x7/16”x8’ 2-1/2”

37 Metal collection

Metallic finish decorative profiles for ceramic wall tiles. It substitutes the traditional ceramic frieze.

pro-part cast iron

38 Profiles and skirtings Profiles

pro-part cast iron Brass profile with metallic covering. 8 mm -5/16’’ decorative trim.

pro-part cast iron 11mm-7/16’’ B71342718 100222994 8x11x2500 mm - 5/16”x7/16”x8’ 2-1/2”

39 Metal collection

Metallic finish decorative profiles for ceramic wall tiles. It substitutes the traditional ceramic frieze.

pro-part cement

40 Profiles and skirtings Profiles

pro-part cement Brass profile with metallic covering. 8 mm -5/16’’ decorative trim.

pro-part cement 11mm-7/16’’ B73141334 100226161 8x11x2500 mm - 5/16”x7/16”x8’ 2-1/2”

41 Metal collection

Metallic finish decorative profiles for ceramic wall tiles. It substitutes the traditional ceramic frieze.

pro-part sand

42 Profiles and skirtings Profiles

pro-part sand Brass profile with metallic covering. 8 mm -5/16’’ decorative trim.

pro-part sand 11mm-7/16’’ B73141333 100226152 8x11x2500 mm - 5/16”x7/16”x8’ 2-1/2”

43 Metal collection

Metallic finish decorative profiles for ceramic wall tiles. It substitutes the traditional ceramic frieze.

pro-part moon line

44 pro-mate 5 moon Brass profile with metallic covering. 5 mm-3/16’’ decorative trim.

pro-mate 5 moon 11mm-7/16’’ B71342592 100120362 5x11x2500mm - 3/16”x7/16”x8’ 2-1/2” pro-part moon Brass profile with metallic covering. 8 mm -5/16’’ decorative trim.

pro-part moon 7mm-9/32’’ B71342681 100177056 8x7x2500mm - 5/16”x9/32”x8’ 2-1/2”

and skirtings Profiles pro-part moon 11mm-7/16’’ B71342591 100120369 8x11x2500mm - 5/16”x7/16”x8’ 2-1/2” pro-part moon 12.5mm-1/2’’ B71342673 100177071 8x12.5x2500mm - 5/16”x1/2”x8’ 2-1/2” pro-part moon line Brass profile with metallic covering. 8 mm -5/16’’ decorative trim.

pro-part moon line 7mm-9/32” B71342683 100177063 8x7x2500mm - 5/16”x9/32”x8’ 2-1/2” pro-part moon line 11mm-7/16’’ B71342634 100158267 8x11x2500mm - 5/16”x7/16”x8’ 2-1/2” pro-part moon line 12.5mm-1/2’’ B71342674 100177080 8x12.5x2500mm - 5/16”x1/2”x8’ 2-1/2”

45 Metal collection

Metallic finish decorative profiles for ceramic wall tiles. It substitutes the traditional ceramic frieze.

pro-part ocean

46 pro-mate 5 ocean Brass profile with metallic covering. 5 mm-13/64’’ decorative trim.

pro-mate 5 ocean 11 mm-7/16’’ B71342594 100120363 5x11x2500 mm - 3/16”x7/16”x8’ 2-1/2” pro-part ocean Brass profile with metallic covering. 8 mm-5/16’’ decorative trim.

pro-part ocean 7mm-9/32” B71342680 100177070 8x7x2500 mm - 5/16”x9/32”x8’ 2-1/2” Profiles and skirtings Profiles pro-part ocean 11mm-7/16’’ B71342595 100120370 8x11x2500 mm - 5/16”x7/16”x8’ 2-1/2” pro-part ocean 12.5mm-1/2’’ B71342675 100177072 8x12.5x2500 mm 5/16”x1/2”x8’ 2-1/2” pro-part ocean line Brass profile with metallic covering. 8 mm-5/16’’ decorative trim.

pro-part ocean line 7mm-9/32” B71342677 100177064 8x7x2500 mm - 5/16”x9/32”x8’ 2-1/2” pro-part ocean line 11mm-7/16’’ B71342635 100158268 8x11x2500 mm - 5/16”x7/16”x8’ 2-1/2” pro-part ocean line 12.5mm-1/2’’ B71342666 100177034 8x12.5x2500 mm - 5/16”x1/2”x8’ 2-1/2”

47 Metal collection

Metallic finish decorative profiles for ceramic wall tiles. It substitutes the traditional ceramic frieze.

pro-part old bronze

48 Profiles and skirtings Profiles

pro-part old bronze Brass profile with metallic covering. 8 mm-5/16’’ decorative trim.

pro-part old bronze 11mm-7/16’’ B71342691 100189092 8x11x2500mm - 5/16”x7/16”x8’ 2-1/2”

49 Metal collection

Metallic finish decorative profiles for ceramic wall tiles. It substitutes the traditional ceramic frieze.

pro-part old iron

50 Profiles and skirtings Profiles

pro-part old iron Brass profile with metallic covering. 8 mm-5/16’’ decorative trim.

pro-part old iron 11mm-7/16’’ B71342692 100189093 8x11x2500mm - 5/16”x7/16”x8’ 2-1/2”

51 Metal collection

Metallic finish decorative profiles for ceramic wall tiles. It substitutes the traditional ceramic frieze.

pro-part coal line

52 Profiles and skirtings Profiles

pro-part coal line Brass profile with metallic covering. 8 mm-5/16’’ decorative trim.

pro part coal line 11mm-7/16’’ B71342687 100189062 8x11x2500mm - 5/16”x7/16”x8’ 2-1/2”

53 Metal collection

Metallic finish decorative profiles for ceramic wall tiles. It substitutes the traditional ceramic frieze.

pro-part graphite matt

54 pro-part graphite matt Brass profile with metallic covering. 8 mm-5/16’’ decorative trim.

pro-part graphite matt 7mm-9/32” B71342672 100177037 8x7x2500 mm - 5/16”x9/32”x8’ 2-1/2” pro-part graphite matt 11mm-7/16’’ B71342636 100158266 8x11x2500 mm - 5/16”x7/16”x8’ 2-1/2” Profiles and skirtings Profiles pro-part graphite matt 12.5mm-1/2’’ B71342668 100177053 8x12.5x2500 mm - 5/16”x1/2”x8’ 2-1/2”

pro-part graphite matt line Brass profile with metallic covering. 8 mm-5/16’’ decorative trim.

pro-part graphite matt line 7mm-9/32” B71342679 100177055 8x7x2500 mm - 5/16”x9/32”x8’ 2-1/2” pro-part graphite matt line 11mm-7/16’’ B71342637 100158265 8x11x2500 mm - 5/16”x7/16”x8’ 2-1/2” pro-part graphite matt line 12.5mm-1/2’’ B71342669 100177036 8x12.5x2500 mm - 5/16”x1/2”x8’ 2-1/2”

55 Metal collection

Metallic finish decorative profiles for ceramic wall tiles. It substitutes the traditional ceramic frieze.

pro-part graphite

56 pro-mate 5 graphite Brass profile with metallic covering. 5 mm-13/64’’ decorative trim.

pro-mate 5 graphite 7mm-9/32” B71342670 100177054 5x7x2500 mm - 3/16”x9/32”x8’ 2-1/2” pro-mate 5 graphite 11mm-7/16’’ B71342598 100120359 5x11x2500 mm - 3/16”x7/16”x8’ 2-1/2” and skirtings Profiles pro-mate 5 graphite 12.5mm-1/2’’ B71342665 100177048 5x12.5x2500 mm - 3/16”x1/2”x8’ 2-1/2” pro-part graphite Brass profile with metallic covering. 8 mm-5/16’’ decorative trim.

pro-part graphite 7mm-9/32” B71342671 100177049 8x7x2500 mm - 5/16”x9/32”x8’ 2-1/2” pro-part graphite 11mm-7/16’’ B71342590 100120366 8x11x2500 mm - 5/16”x7/16”x8’ 2-1/2” pro-part graphite 12.5mm-1/2’’ B71342667 100177035 8x12.5x2500 mm - 5/16”x1/2”x8’ 2-1/2”

57 Metal collection

Metallic finish decorative profiles for ceramic wall tiles. It substitutes the traditional ceramic frieze.

pro-part line matt

58 pro-mate 5 line Brass profile with metallic covering. 5 mm-13/64’’ decorative trim.

pro-mate 5 line 11mm-7/16’’ B71342602 100120360 8x11x2500 mm - 3/16”x7/16”x8’ 2-1/2” pro-part line Brass profile with metallic covering. 8 mm-5/16’’ decorative trim.

pro-part line 7mm-9/32” B71342684 100177061 8x7x2500 mm - 5/16”x9/32”x8’ 2-1/2” Profiles and skirtings Profiles pro-part line 11mm-7/16’’ B71342593 100120367 8x11x2500 mm - 5/16”x7/16”x8’ 2-1/2” pro-part line 12.5mm-1/2’’ B71342678 100177058 8x12.5x2500 mm - 5/16”x1/2”x8’ 2-1/2” pro-part line matt Brass profile with metallic covering. 8 mm-5/16’’ decorative trim.

pro-part line matt 7mm-9/32” B71342682 100177062 8x7x2500 mm - 5/16”x9/32”x8’ 2-1/2” pro-part line matt 11mm-7/16’’ B71342633 100157798 8x11x2500 mm - 5/16”x7/16”x8’ 2-1/2” pro-part line matt 12.5mm-1/2’’ B71342676 100177059 8x12.5x2500 mm - 5/16”x1/2”x8’ 2-1/2”

59 Chrome collection

Chromed brass decorative profile for wall tiles. It substitutes the traditional decorative ceramic frieze. Typical LIFESTYLE by PORCELANOSA profile.

pro-part chrome

60 pro-part chrome

pro-part chrome 9 mm-11/32” B73134002 100005369 8x9x2500 mm - 5/16”x11/32”x8’ 2-1/2” pro-part chrome 10 mm-3/8’’ B71342552 100088905 8x10x2500 mm - 5/16”x3/8”x8’ 2-1/2” pro-part chrome 11 mm-7/16’’ B73134003 100005370 8x11x2500 mm - 5/16”x7/16”x8’ 2-1/2”

pro-mate 5 chrome Profiles and skirtings Profiles pro-mate 5 chrome 9mm-11/32” B71132003 100004945 5x9x2500 mm - 3/16”x11/32”x8’ 2-1/2” pro-mate 5 chrome 11mm-7/16’’ B71132004 100004946 5x11x2500 mm - 3/16”x7/16”x8’ 2-1/2” pro-mate 5 chrome 12.5mm-1/2’’ B71134004 100004955 5x12.5x2500 mm - 3/16”x1/2”x8’ 2-1/2”

pro-mate 3 chrome

pro-mate 3 chrome 9mm-11/32” B71133002 100004952 3x9x2500 mm - 1/8”x11/32”x8’ 2-1/2” pro-mate 3 chrome 10mm-3/8’’ B71133003 100004953 3x10x2500 mm - 1/8”x3/8”x8’ 2-1/2” pro-mate 3 chrome 12.5mm-1/2’’ B71133004 100004954 3x12.5x2500 mm - 1/8”x1/2”x8’ 2-1/2”

61 Chrome collection

Chromed brass decorative profile for wall tiles. It substitutes the traditional decorative ceramic frieze. Typical LIFESTYLE by PORCELANOSA profile.

Suitable for trimming corners and transitions between ceramic tiles.

Floor and wall tile Floor and wall tile

8 mm - 5/16

pro-part h pro-part corner pro-part

Chromed brass Chromed brass corner KEA SAP h (mm) h (inches) KEA SAP h (mm) h (inches) B73134001 100005368 XLight 7 9/32 B73134301 100005373 XLight 7 9/32 B71342684 100177061 Line 7 9/32 B73134302 100005374 9 11/32 B71342682 100177062 Line matt 7 9/32 B71342554 100091065 10 3/8 B73134002 100005369 9 11/32 B73134303 100005375 11 7/16 B71342552 100088905 10 3/8 B73134304 100005376 12.5 1/2 B73134003 100005370 10 3/8 B71342541 100067718 15 19/32 B71342593 100120367 Line 11 7/16 B71342633 100157798 Line matt 11 7/16 B73134004 100005371 12.5 1/2 B71342678 100177058 Line 12.5 1/2 B71342676 100177059 Line matt 12.5 1/2 B73134005 100005372 15 19/32

5 mm - 3/16

h pro-mate 5 pro-mate 5 Chromed brass KEA SAP h (mm) h (inches) B71342611 100126779 XLight 7 9/32 B71132003 100004945 9 11/32 B71132004 100004946 11 7/16 B71342602 100120360 Line 11 7/16 B71134004 100004955 12.5 1/2

3 mm - 1/8

h pro-mate 3 pro-mate 3 Chromed brass KEA SAP h (mm) h (inches) B71342608 100126772 XLight 6 1/4 B71133001 100004951 8 5/16 B71133002 100004952 9 11/32 B71133003 100004953 10 3/8 B71133004 100004954 12.5 1/2

Profile length: 2500 mm - 8’ 2-1/2” Minimum packaging: 10 profiles

62 Chrome collection

a

pro-part Li h pro-part Li corner pro-part Li

Chromed brass Chromed brass corner and skirtings Profiles

KEA SAP h (mm - inches) a (mm - inches) KEA SAP h (mm) h (inches) B71342618 100126780 XLight 4.5 4/16 5.5 7/32 B72141343 100098464 11 7/16 B71342542 100070170 11 7/16 12 15/32 B71342550 100085153 12.5 1/2 B71342543 100070171 12.5 1/2 13.5 17/32

pro-mate 45 TOP h pro-mate 45 TOP esquina pro-mate 45 top Chromed brass Chromed brass corner KEA SAP h (mm) h (inches) KEA SAP h (mm) h (inches) B71342614 100126778 XLight 6 1/4 B71342704 100191936 10 3/8 B71342565 100099965 10 3/8 B71342620 100128801 12.5 1/2 Anodized aluminium silver KEA SAP h (mm) h (inches) B71342612 100126777 XLight 6 1/4

h pro-mate 45 pro-mate 45 Chromed brass KEA SAP h (mm) h (inches) B71342566 100099963 10 3/8 B71342567 100099964 12.5 1/2

Profile length: 2500 mm - 8’ 2-1/2” Minimum packaging: 10 profiles

63 Pro-telo collection

Metal decorative profile for ceramic wall tiles. Flangeless metallic line for tiles of any thickness.

Available in a wide variety of materials, finishes and dimensions, they represent an excellent solution for the design of contem- porary style ceramic settings.

Floor and wall tile Wall tile pro-telo stainless 8x40 pro-telo 8x40 h Stainless Steel 8x40 KEA SAP h (mm) h (inches) B72141110 100005299 Gloss 8 5/16 pro-telo stainless 8x25 pro-telo 8x25 h Stainless Steel 8x25 KEA SAP h (mm) h (inches) B72141101 100005293 Gloss 8 5/16

pro-telo stainless 8x10 pro-telo 8x10 h stainless esteel 8x10 KEA SAP h (mm) h (inches) B72141006 100005292 Gloss 8 5/16 pro-telo aluminium pro-telo Aluminium h

Aluminium 8x10 silver KEA SAP h (mm) h (inches) B72124002 100005289 Gloss 10 3/8 B72122002 100005286 Anodized 10 3/8 pro-telo recto pro-telo Recto h Aluminium 8x10 KEA SAP h (mm) h (inches) B72141318 100084015 High gloss 8 5/16 B72141346 100100730 Titanium 8 5/16

Profile length: 2500 mm - 8’ 2-1/2”’ Minimum packaging: 10 profiles pro-telo titanium profile length: 2400 mm - 7’ 10-1/2”

64 Profiles and skirtings Profiles

65 66 Profiles and skirtings Profiles

Skirtings

67 pro-skirting LED white

68 Pro-skirting LED

Decorative profile compatible with lighting systems. Luminescent skirting for walls.

pro-skirting LED black pro-skirting LED white pro-skirting LED silver

pro-skirting LED black

pro-skirting LED black pro-skirting LED corner black KEA SAP KEA SAP B79999052 100200414 13x60x2500 mm - 1/2”x2-3/8”x8’ 2-1/2” B79999071 100213201 13x60x5 mm - 1/2”x2-3/8”x8’ 2-1/2”

pro-skirting LED white

pro-skirting LED white pro-skirting LED corner white KEA SAP KEA SAP B79999053 100200418 13x60x2500 mm - 1/2”x2-3/8”x8’ 2-1/2” B79999070 100213220 13x60x5 mm - 1/2”x2-3/8”x8’ 2-1/2” Profiles and skirtings Profiles pro-skirting LED silver

pro-skirting LED silver pro-skirting LED corner silver KEA SAP KEA SAP B79999051 100200403 13x60x2500 mm - 1/2”x2-3/8”x8’ 2-1/2” B70104242 100213154 13x60x5 mm - 1/2”x2-3/8”x8’ 2-1/2”

Fixing clips pro-skirting LED KEA SAP B70104237 100193608 17x30 mm - 21/32”x1-3/16” 50 ud

Lighting system not included in the price of the profile.

69 pro-skirting black

70 Pro-skirting

Metal profiles in five finishes and straight trims. They replace traditional ceramic skirting. Specially recommended for shops and public buildings.

pro-skirting black pro-skirting white pro-skirting silver pro-skirting black

pro-skirting black pro-skirting corner black KEA SAP KEA SAP B71342712 100213522 12x60x2500 mm - 15/32”x2-3/8”x8’ 2-1/2” B70104240 100213153 12x60x12 mm - 15/32”x2-3/8”x15/32” B79999079 100225511 12x100x2500 mm - 15/32”x3-15/16”x5’ 10-1/2’’ 100236020 12x100x12 mm - 15/32”x3-15/16”x15/32” pro-skirting white

pro-skirting white pro-skirting corner white KEA SAP KEA SAP B71342710 100213533 12x60x2500 mm - 15/32”x2-3/8”x8’ 2-1/2” B70104245 100213200 12x60x12 mm - 15/32”x2-3/8”x15/32” B79999078 100225498 12x100x2500 mm - 15/32”x3-15/16”x5’ 10-1/2’’ 100235979 12x100x12 mm - 15/32”x3-15/16”x15/32” Profiles and skirtings Profiles pro-skirting silver

pro-skirting silver pro-skirting corner silver KEA SAP KEA SAP B71342711 100213532 12x60x2500 mm - 15/32”x2-3/8”x8’ 2-1/2” B70104241 100213199 12x60x12 mm - 15/32”x2-3/8”x15/32” B79999080 100225479 12x100x2500 mm - 15/32”x3-15/16”x5’ 10-1/2’’ 100235986 12x100x12 mm - 15/32”x3-15/16”x15/32”

Fixing clips pro-skirting KEA SAP B70104237 100193608 17x30 mm - 21/32”x1-3/16” 50 ud

71 pro-skirting Oxford Acero

72 Pro-skirting PAR-KER

Decorative skirtings for PAR-KER tiles by PORCELANOSA. LIFESTYLE design.

pro-skirting Oxford Acero pro-skirting Oxford

pro-skirting Oxford Acero pro-skirting corner Oxford Acero KEA SAP KEA SAP B79999049 100193645 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B78200002 100233474 12x60x12 mm B71142020 100178475 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8” B78200050 100233572 12x100x12 mm

pro-skirting Oxford Antracita pro-skirting corner Oxford Antracita KEA SAP KEA SAP B79999050 100193646 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B78200019 100233460 12x60x12 mm B71142031 100178471 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8” B78200027 100233528 12x100x12 mm

pro-skirting Oxford Castaño pro-skirting corner Oxford Castaño KEA SAP KEA SAP B79999040 100193605 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B78200004 100233419 12x60x12 mm B71142015 100178435 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8” B78200045 100233570 12x100x12 mm

pro-skirting Oxford Silver pro-skirting corner Oxford Silver

KEA SAP KEA SAP and skirtings Profiles B79999042 100193634 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B78200041 100233481 12x60x12 mm B71142028 100178463 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8” B78200039 100233564 12x100x12 mm

pro-skirting Oxford Cognac pro-skirting corner Oxford Cognac KEA SAP KEA SAP B79999024 100193547 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B78200003 100233453 12x60x12 mm B71142012 100178437 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8” B78200051 100233563 12x100x12 mm

pro-skirting Oxford Natural pro-skirting corner Oxford Natural KEA SAP KEA SAP B79999026 100193598 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B78200008 100233438 12x60x12 mm B71142023 100178462 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8” B78200033 100233547 12x100x12 mm

pro-skirting Oxford Blanco pro-skirting corner Oxford Blanco KEA SAP KEA SAP B79999023 100193597 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B78200010 100233470 12x60x12 mm B71142013 100178436 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8” B78200056 100233562 12x100x12 mm

Fixing clips pro-skirting PAR-KER KEA SAP B70104237 100193608 17x30 mm - 21/32”x1-3/16” 50 ud

73 pro-skirting Ascot Teca

74 Pro-skirting PAR-KER

Decorative skirtings for PAR-KER tiles by PORCELANOSA. LIFESTYLE design.

pro-skirting Ascot Teca pro-skirting Ascot

pro-skirting Ascot Teca pro-skirting corner Ascot Teca KEA SAP KEA SAP B79999045 100193642 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B78200026 100233495 12x60x12 mm B71142029 100178466 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8” B78200054 100233581 12x100x12 mm

pro-skirting Ascot Olivo pro-skirting corner Ascot Olivo KEA SAP KEA SAP B79999033 100193611 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B78200015 100233484 12x60x12 mm B71142024 100178483 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8” B78200046 100233571 12x100x12 mm

pro-skirting Ascot Roble pro-skirting corner Ascot Roble KEA SAP KEA SAP B79999046 100193640 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B78200020 100233463 12x60x12 mm B71142021 100178484 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8” B78200044 100233549 12x100x12 mm

pro-skirting Ascot Arce pro-skirting corner Ascot Arce

KEA SAP KEA SAP and skirtings Profiles B79999021 100193595 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B78200007 100233408 12x60x12 mm B71142022 100178480 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8” B78200028 100233565 12x100x12 mm

Fixing clips pro-skirting PAR-KER KEA SAP B70104237 100193608 17x30 mm - 21/32”x1-3/16” 50 ud

75 pro-skirting Manhattan Colonial

76 Pro-skirting PAR-KER

Decorative skirtings for PAR-KER tiles by PORCELANOSA. LIFESTYLE design.

pro-skirting Manhattan Colonial pro-skirting Manhattan

pro-skirting Manhattan Colonial pro-skirting corner Manhattan Colonial KEA SAP KEA SAP B79999030 100193603 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B78200052 100233574 12x60x12 mm B79999020 100189248 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8” B78200025 100233555 12x100x12 mm

pro-skirting Manhattan Maple pro-skirting corner Manhattan Maple KEA SAP KEA SAP B79999037 100193604 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B78200005 100233398 12x60x12 mm B79999017 100191461 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8” B78200030 100233499 12x100x12 mm

pro-skirting Manhattan Cognac pro-skirting corner Manhattan Cognac KEA SAP KEA SAP B79999029 100193602 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B78200040 100233621 12x60x12 mm B79999016 100191470 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8” B78200049 100233517 12x100x12 mm

pro-skirting Manhattan Natural pro-skirting corner Manhattan Natural

KEA SAP KEA SAP and skirtings Profiles B79999043 100193623 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B78200017 100233452 12x100x12 mm B79999018 100191490 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8” B78200021 100233556 12x100x12 mm

Fixing clips pro-skirting PAR-KER KEA SAP B70104237 100193608 17x30 mm - 21/32”x1-3/16” 50 ud

77 pro-skirting Delaware Acero

78 Pro-skirting PAR-KER

Decorative skirtings for PAR-KER tiles by PORCELANOSA. LIFESTYLE design.

pro-skirting Delaware Acero pro-skirting Delaware

pro-skirting Delaware Acero pro-skirting corner Delaware Acero KEA SAP KEA SAP 100226718 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B78200023 100233505 12x60x12 mm B79999074 100221931 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8” B78200016 100233485 12x100x12 mm

pro-skirting Delaware Arce pro-skirting corner Delaware Arce KEA SAP KEA SAP 100226689 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B78200053 100233561 12x60x12 mm B79999075 100221950 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8” B78200035 100233525 12x100x12 mm

pro-skirting Delaware Natural pro-skirting corner Delaware Natural KEA SAP KEA SAP 100226719 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B78200047 100233593 12x60x12 mm B79999076 100222010 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8” B78200037 100233552 12x100x12 mm

pro-skirting Delaware Nogal pro-skirting corner Delaware Nogal

KEA SAP KEA SAP and skirtings Profiles 100226740 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B78200055 100233612 12x60x12 mm B79999077 100222027 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8” B78200043 100233536 12x100x12 mm

Fixing clips pro-skirting PAR-KER KEA SAP B70104237 100193608 17x30 mm - 21/32”x1-3/16” 50 ud

79 pro-skirting micro-stuk manhattan

80 Pro-skirting PAR-KER

Decorative skirting for micro-stuk design wall coverings. LIFESTYLE design.

micro-stuk snow micro-stuk grey micro-stuk manhattan micro-stuk cement

micro-stuk white micro-stuk beige micro-stuk moka micro-stuk wenge pro-skirting micro-stuk

pro-skirting micro-stuk snow KEA SAP B79999061 100202266 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B79999060 100202257 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8”

pro-skirting micro-stuk grey KEA SAP B79999041 100193614 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B79999012 100189376 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8”

pro-skirting micro-stuk manhattan KEA SAP B79999059 100202246 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B79999058 100202256 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8”

pro-skirting micro-stuk cement

KEA SAP and skirtings Profiles B79999035 100193626 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B79999015 100189368 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8”

pro-skirting micro-stuk white KEA SAP B79999038 100193613 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B79999013 100189367 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8”

pro-skirting micro-stuk beige KEA SAP B79999039 100193625 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B79999011 100189383 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8”

pro-skirting micro-stuk moka KEA SAP B79999044 100193628 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B79999014 100189369 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8”

pro-skirting micro-stuk wenge KEA SAP B79999063 100202258 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” B79999062 100202267 12x100x1800 mm - 15/32”x3-15/16”x5’ 10-7/8”

Fixing clips pro-skirting micro-stuk KEA SAP B70104237 100193608 17x30 mm - 21/32”x1-3/16” 50 ud 81 pro-plint stainless steel

82 Pro-skirting PAR-KER

Metallic profiles for skirtings. They have a high mechanical resistance with a functional, modern design. Specially recommended for office floors and raised access floors.

80 mm

10 mm

pro-plint stainless steel

pro-plint stainless steel KEA SAP B79141001 100005635 Gloss B79141002 100005636 Brushed

pro-plint anodized aluminium

pro-plint anodized aluminium pro-plint corner anodized aluminium KEA SAP KEA SAP B79141508 100073104 Silver B79141513 100073105 Outer B79141509 100073106 Internal

pro-plint lateral cap pro-plint connection KEA SAP KEA SAP and skirtings Profiles B79141511 100073107 Right B79141510 100073109 B79141512 100073108 Left

Profile length: 2500 mm - 8’ 2-1/2”

83 84 Profiles and skirtings Profiles

Corner profiles and trims for wall tiles

85 Corner profiles and trims for wall tiles pro-mate 2 Right angle, stainless steel profile for corners and wall and floor tile coverings.

Right angle, stainless steel profiles for trimming the non-glazed edge of the tile. Suitable for separating tiles in walls as well as in floors.

Wall tile corner Floor and wall tile 2 mm - 5/64’’

h pro-mate 2 pro-mate 2 V2A Stainless steel KEA SAP h (mm) h (inches) B71342617 100126769 XLight 6 1/4 B71141002 100004957 10 3/8 B71141003 100004958 12.5 1/2 B71141004 100004959 15 19/32 B71141005 100004960 20 13/16

Gloss stainless steel KEA SAP h (mm) h (inches) B71142002 100004967 10 3/8 B71142003 100004968 12.5 1/2 B71142004 100004969 15 19/32

V4A Stainless steel KEA SAP h (mm) h (inches) B71141009 100004964 10 3/8 B71141010 100004965 12.5 1/2

Profile length: 2500 mm - 8’ 2-1/2” Minimum packaging: 10 profiles

86 Corner profiles and trims for wall tiles

pro-mate 3 Right angle profile for corners and wall and floor tile coverings. Decorative use as a metallic line.

Right angle, 3 mm - 1/8’’ thick profiles for trimming the non-glazed edge of the tile. Available in a wide variety of materials, they are also suitable for separating wall tiles.

Wall tile corner Floor and wall tile 3 mm - 1/8’’

h pro-mate 3 pro-mate 3 Chromed brass KEA SAP h (mm) h (inches) B71342608 100126772 XLight 6 1/4 B71133001 100004951 8 5/16 B71133002 100004952 9 11/32 B71133003 100004953 10 3/8 B71133004 100004954 12.5 1/2 Anodized aluminium silver KEA SAP h (mm) h (inches) B71342616 100126770 XLight 6 1/4 B71122001 100004899 8 5/16 B71122002 100004900 9 3/8 Profiles and skirtings Profiles B71122003 100004901 10 3/8 B71122004 100004902 12.5 1/2 B71122005 100004903 15 19/32 Black aluminium KEA SAP h (mm) h (inches) B71342716 100220142 8 5/16 B71342661 100171991 10 11/32 B71342715 100220132 12.5 1/2 Lacquered aluminium High gloss aluminum KEA SAP h (mm) h (inches) KEA SAP h (mm) h (inches) B71342609 100126771 White XLight 6 1/4 B71124003 100004925 10 3/8 B71123003 100004911 White 10 3/8 B71124004 100004926 12.5 1/2 B71123004 100004912 White 12.5 1/2 B71123007 100004915 Beige 10 3/8 PVC B71123008 100004916 Beige 12.5 1/2 KEA SAP h (mm) h (inches) B71123011 100004919 Black 10 3/8 B71111009 100004865 White 10 3/8 B71123012 100004920 Black 12.5 1/2 B71111017 100004873 White 12.5 1/2 B71111010 100004866 Jazmín 10 3/8 B71111011 100004867 Beige 10 3/8 B71111012 100004868 Black 10 3/8 B71111013 100004869 Grey 10 3/8 B71111014 100004870 Marfil 10 3/8

Profile length: 2500 mm - 8’ 2-1/2” Minimum packaging: 10 profiles

87 Corner profiles and trims for wall tiles pro-mate 5 Right angle profile for corners and wall and floor tile coverings. Decorative use as a metallic line. Right angle and 5 mm - 13/64’’ edge profiles for trimming the non-glazed edge of the tile. Suitable for transitions between floor coverings at the same level.

Wall tile corner Floor and wall tile

5 mm

h pro-mate 5 pro-mate 5 Chromed brass KEA SAP h (mm) h (inches) B71342611 100126779 XLight 7 1/4 B71132003 100004945 9 3/8 B71132004 100004946 11 7/16 B71134004 100004955 12.5 1/2

Gloss polished brass KEA SAP h (mm) h (inches) B71132002 100004944 11 7/16 Anodized aluminium silver

KEA SAP h (mm) h (inches) B71125003 100004927 11 7/16

Profile length: 2500 mm - 8’ 2-1/2” Minimum packaging: 10 profiles

88 Corner profiles and trims for wall tiles

pro-part Li Decorative profile for ceramic wall tiles. Suitable for trimming corners and transitions between ceramic tiles.

Right angle, corner shaped profiles, with both sides of the same length. Specially recommended for rectified tiles corners and for tiles with relief decoration.

Wall tile corner Floor and wall tile

a

pro-part Li h pro-part Li corner pro-part Li

Chromed brass Chromed brass corner KEA SAP h (mm - inches) a (mm - inches) KEA SAP h (mm) h (inches) B71342618 100126780 XLight 4.5 - 3/16 5.5 - 7/32 B72141343 100098464 11 7/16 B71342542 100070170 11 - 7/16 12 - 15/32 B71342550 100085153 12.5 1/2 B71342543 100070171 12.5 - 1/2 13.5 - 17/32

Anodized aluminium silver Anodized aluminium silver corner KEA SAP h (mm - inches) a (mm - inches) KEA SAP h (mm) h (inches) B71342619 100128227 XLight 4.5 - 3/16 5.5 - 7/32 B71342557 100093706 11 7/16 B71342539 100062074 11 - 7/16 12 - 1/2 B71342556 100093705 12.5 1/2

B71342537 100062086 12.5 - 1/2 13.5 - 17/32 and skirtings Profiles High gloss aluminum High gloss aluminum KEA SAP h (mm - inches) a (mm - inches) KEA SAP h (mm) h (inches) B71342535 100062072 11 - 7/16 10 - 3/8 B71342581 100102763 11 7/16 B71342538 100062073 12.5 - 1/2 11.5 - 13/64 B71342580 100102762 12.5 1/2

a

h pro-part Li brushed pro-part Li brushed Brushed anodized aluminium KEA SAP h (mm - inches) a (mm - inches) B71342645 100159084 11 - 7/16 12 - 1/2 B71342646 100159083 12.5 - 1/2 13.5 - 17/32

Profile length: 2500 mm - 8’ 2-1/2” Minimum packaging: 10 profiles

89 Corner profiles and trims for wall tiles pro-part Decorative profile for ceramic wall tiles. Suitable for trimming corners and transitions between ceramic tiles.

Right angle, corner shaped profiles, with an 8 mm - 5/16’’ edge and a variable width edge. Excellent solution for a wide variety of ceramic installations.

Wall tile corner Floor and wall tile

8 mm 8 mm

pro-part h h pro-part corner pro-part pro-part inox Chromed brass Chromed brass corner KEA SAP h (mm) h (inches) KEA SAP h (mm) h (inches) B73134001 100005368 XLight 7 1/4 B73134301 100005373 XLight 7 1/4 B73134002 100005369 9 3/8 B73134302 100005374 9 3/8 B71342552 100088905 10 3/8 B71342554 100091065 10 3/8 B73134003 100005370 11 7/16 B73134303 100005375 11 7/16 B73134004 100005371 12.5 1/2 B73134304 100005376 12.5 1/2 B73134005 100005372 15 19/32 B71342541 100067718 15 19/32

Stainless steel Stainless steel corner KEA SAP h (mm) h (inches) KEA SAP h (mm) h (inches) B73141009 100005377 9 3/8 B73141309 100005380 9 3/8 B73141010 100005378 11 7/16 B73141310 100005381 11 7/16 B73141011 100005379 12.5 1/2 B73141311 100005382 12.5 1/2

Anodized aluminium silver Anodized aluminium silver corner KEA SAP h (mm) h (inches) KEA SAP h (mm) h (inches) B73122001 100005322 XLight 7 1/4 B73122301 100005336 XLight 7 1/4 B73122002 100005323 9 3/8 B73122302 100005337 9 3/8 B73122003 100005324 11 7/16 B73122303 100005338 11 7/16 B73122004 100005325 12.5 1/2 B73122304 100005339 12.5 1/2 B73122005 100005326 15 19/32

High gloss aluminum KEA SAP h (mm) h (inches) B73141317 100089004 11 7/16 B73124004 100005353 12.5 1/2

Lacquered aluminium Black matt aluminium KEA SAP h (mm) h (inches) KEA SAP h (mm) h (inches) B71342551 100088551 Black 11 7/16 B71342714 100220100 7 1/4 B71342547 100080530 Black 12.5 1/2 B71342659 100171975 11 7/16 B71342576 100100723 White 11 7/16 B71342713 100220083 12.5 1/2 B71342549 100083438 White 12.5 1/2 Gloss polished brass KEA SAP h (mm) h (inches) B73132003 100005363 11 7/16 B73132004 100005364 12.5 1/2

Profile length: 2500 mm - 8’ 2-1/2” Minimum packaging: 10 profiles

90 Corner profiles and trims for wall tiles pro-mate 45 Rounded profile for protecting wall tiles corners.

These profiles are the classic solution for protecting corners in wall tile coverings. Available in a wide variety of materials, its main feature is being shock-resistant.

Wall tile corner Wall tile corner

h pro-mate 45 TOP pro-mate 45 top Chromed brass Chromed brass corner KEA SAP h (mm) h (inches) KEA SAP h (mm) h (inches) B71342614 100126778 XLight 6 1/4 B71342704 100191936 XLight 10 3/8 B71342565 100099965 10 3/8 B71342620 100128801 12.5 1/2 Anodized aluminium silver KEA SAP h (mm) h (inches) B71342612 100126777 XLight 6 1/4 h pro-mate 45 brass pro-mate 45

Chromed brass and skirtings Profiles KEA SAP h (mm) h (inches) B71342566 100099963 10 3/8 B71342567 100099964 12.5 1/2

h pro-mate 45 stainless steel pro-mate 45 open Stainless steel V2A KEA SAP h (mm) h (inches) B71341001 100005156 8 5/16 B71341002 100005157 10 3/8 B71341003 100005158 12.5 1/2

h pro-mate 45 aluminio pro-mate 45 closed Anodized aluminium silver KEA SAP h (mm) h (inches) B71322003 100005094 10 3/8 B71322005 100005096 12.5 1/2 Lacquered aluminium High gloss aluminum KEA SAP h (mm) h (inches) KEA SAP h (mm) h (inches) B71323005 100005113 White 10 3/8 B71342562 100096222 10 3/8 B71323009 100005117 White 12.5 1/2 B71342570 100100665 12.5 1/2

Profile length: 2500 mm - 8’ 2-1/2” Minimum packaging: 10 profiles

91 Corner profiles and trims for wall tiles pro-corner Metallic profile for protecting corners.

Right angle, metallic profiles for protecting corners. Most of the pro-corner models are installed after the tile, which implies a small lip over the tile surface.

Wall tile corner Wall tile corner

h1 h2 pro-corner P pro-corner P Aluminium KEA SAP h1 (mm-inches) h2 (mm-inches) B78141126 100158001 High gloss 15 - 19/32 12 - 15/32 B78141127 100158002 Silver 15 - 19/32 12 - 15/32 B71342706 100213125 Black 15 - 19/32 12 - 15/32 h

h pro-corner R pro-corner R

Gloss stainless steel KEA SAP h (mm) h (inches) B78141112 100005623 25 1 h

h pro-corner B pro-corner B Aluminium KEA SAP h (mm) h (inches) B78122001 100005584 25 1

Profile length: 2500 mm - 8’ 2-1/2” Minimum packaging: 10 profiles

92 Profiles and skirtings Profiles

pro-corner P black

93 Corner profiles and trims for wall tiles

XLIGHT Profiles Corner profiles for wall tiles less than 6 mm - 1/4’’ thick. Specially recommended for mosaics and large format and thin ceramic slabs, such as XLIGHT.

Available in different shapes, from right-angled profiles for straight trims to rounded shape profiles. Decorative use.

Wall tile corner Wall tile

2 mm - 5/64’’ pro-mate 2 pro-mate 2 h

KEA SAP h (mm) h (inches) B71342617 100126769 Inox V2A 6 1/4 3 mm - 1/8’’ pro-mate 3 h pro-mate 3 KEA SAP h (mm) h (inches) B71342608 100126772 Chrome 6 1/4 B71342616 100126770 Anod. 6 1/4 B71342609 100126771 White 6 1/4 5 mm - 13/64’’

pro-mate 5 h pro-mate 5 KEA SAP h (mm) h (inches) B71342611 100126779 chrome 7 1/4 8 mm - 5/16’’

pro-part h pro-part KEA SAP h (mm) h (inches) B73134001 100005368 Chrome 7 1/4 B71342684 100177061 Chrome line 7 1/4 B71342682 100177062 Line matt 7 1/4 B71342681 100177056 Moon 7 1/4 B71342683 100177063 Moon line 7 1/4 B71342671 100177049 Graphite 7 1/4 B71342672 100177037 Graphite matt 7 1/4 B71342679 100177055 Graphite matt line 7 1/4 B73122001 100005322 Anod. 7 1/4 a

pro-part Li h pro-part Li KEA SAP h1 (mm-inches) h2 (mm-inches) B71342618 100126780 Chrome 4.5 - 3/16 5.5 - 7/32 B71342619 100128227 Anod. 4.5 - 3/16 5.5 - 7/32

Profile length: 2500 mm - 8’ 2-1/2” Minimum packaging: 10 profiles

94 Corner profiles and trims for wall tiles Profiles and skirtings Profiles

pro-mate 45 TOP pro-mate 45 top h KEA SAP h (mm) h (inches) B71342614 100126778 Chrome 6 1/4 B71342612 100126777 Anod. 6 1/4 pro-mate 45 pro-mate 45 V2A h

KEA SAP h (mm) h (inches)

B71342613 100126775 Inox V2A 6 1/4

Profile length: 2500 mm - 8’ 2-1/2” Minimum packaging: 10 profiles

95 96 Profiles and skirtings Profiles

Technical profiles

97 Technical profiles pro-T Profile for transitions between floor coverings.

Profiles for transitions between tiles or slabs with slightly different heights. Available in two widths: 14 mm - 9/16 and 25 mm - 1’’. Specially recommended for transitions between ceramic tiles and wooden floors.

Floor tile

h h

Stainless 7 mm - Brass and 7 mm - pro-T steel 1/4 aluminium 1/4 Chromed brass KEA SAP h (mm) h (inches) B75133401 100005460 14 9/16 B75133402 100005461 25 1

Gloss stainless steel KEA SAP h (mm) h (inches) B75141003 100005462 14 9/16 B75141004 100005463 25 1

Brushed stainless steel KEA SAP h (mm) h (inches) B75141005 100005464 14 9/16 B75141006 100005465 25 1

Anodized aluminium silver KEA SAP h (mm) h (inches) B75122001 100005452 14 9/16 B75122002 100005453 25 1

Profile length: 2500 mm - 8’ 2-1/2” Minimum packaging: 10 profiles

98 Technical profiles

pro-level Transition profile between floor coverings at different levels. It covers the non-glazed edge of the tile and protects it from shocks.

Technical profiles for small height differences between floor coverings. Available in rounded finish and sloped finish. Specially recommended for high transit floors.

Floor tile Floor tile

h pro-level C pro-level C Anodized aluminium silver KEA SAP h (mm) h (inches) B74122002 100005426 11 7/16 B74122003 100005427 12.5 1/2

h pro-level R pro-level R

Anodized aluminium silver KEA SAP h (mm) h (inches) B74122004 100005428 11 7/16 Profiles and skirtings Profiles B74122005 100005429 12.5 1/2 B74122006 100005430 15 19/32 B74122007 100005431 20 13/16

Profile length: 2500 mm - 8’ 2-1/2” Minimum packaging: 10 profiles

99 Technical profiles pro-shower New range of profiles for shower trays. Designed to cover the sides of shower trays; specially for shower with only one direction slope. There are also special trims for installing glass screens.

These profiles are made of stainless steel and are available in two different finishings: gloss and brushed.

pro-shower floor pro-shower wall

pro-shower floor h1 pro-shower floor h2 Chromed stainless steel Brushed stainless steel KEA SAP h1 (mm-inches) h2 (mm-inches) KEA SAP h1 (mm-inches) h2 (mm-inches) B77199022 100159068 Left side 12.5 - 1/2 24 - 1 B77199020 100159067 Left side 12.5 - 1/2 32 - 1-1/4 B77199038 100160219 Right side 12.5 - 1/2 24 - 1 B77199040 100160218 Right side 12.5 - 1/2 32 - 1-1/4

B77199025 100159069 Left side 12.5 - 1/2 32 - 1-1/4 Profile length h2=32 1480 mm B77199044 100160280 Right side 12.5 - 1/2 32 - 1-1/4

Profile length h2=24 980 mm Profile length h2=32 1480 mm h1 pro-shower wall pro-shower wall h2 Chromed stainless steel Brushed stainless steel KEA SAP h1 (mm-inches) h2 (mm-inches) KEA SAP h1 (mm-inches) h2 (mm-inches) B77199034 100159100 Left side 12.5 - 1/2 32 - 1-1/4 B77199032 100159088 Left side 12.5 - 1/2 32 - 1-1/4 B77199037 100160248 Right side 12.5 - 1/2 32 - 1-1/4 B77199035 100160246 Right side 12.5 - 1/2 32 - 1-1/4 Profile length h2=32 1480 mm Profile length h2=32 1480 mm 13 mm - 33/64

h2 pro-shower glass Front pro-shower glass h1 Chromed stainless steel KEA SAP h1 (mm-inches) h2 (mm-inches) B77199027 100159095 Front side 12.5 - 1/2 32 - 1-1/4

Front profile length h2=25 2100 mm Left hand pro-shower Left Right hand pro-shower

100 Technical profiles

pro-sanit Concave profile for installation where walls and floors meet or between wall coverings and bathtubs, shower trays or other bath elements. It substitutes the traditional curve ceramic piece.

It reduces the risk of water leakage and eases cleaning and preserva- tion of angles between floor and wall coverings.

Floor covering trims

h pro-sanit U1 pro-sanit U1 PVC h pro-sanit U1 alu Aluminium gloss silver KEA SAP h (mm) h (inches) B77199014 100062075 16 5/8 B77199018 100062076 22 7/8

Anodized aluminium silver KEA SAP h (mm) h (inches) B77199017 100062077 16 5/8 B77199015 100062078 22 7/8

Lacquered aluminium

KEA SAP h (mm) h (inches) and skirtings Profiles B77199013 100062079 White 16 5/8 B77199016 100062080 White 22 7/8

PVC KEA SAP h (mm) h (inches) B77111005 100005530 White 9 3/8

h

pro-sanit U2 pro-sanit U2 h Stainless steel Stainless steel corner KEA SAP h (mm) h (inches) KEA SAP h (mm) h (inches) B77141001 100005566 Gloss 12.5 1/2 B77141501 100005567 Gloss outer 12.5 1/2 B77142001 100005569 Brushed 12.5 1/2 B77141502 100005568 Gloss inner 12.5 1/2 B77142501 100005570 Brushed outer 12.5 1/2 B77142502 100005571 Brushed internal 12.5 1/2

PVC KEA SAP h (mm) h (inches) B77111013 100005538 White 9 x 9 3/8 x 3/8 B77111017 100005542 White 11 x 9 7/16 x 3/8

pro-sanit U1 and pro-sanit U2 profiles length: 2500 mm - 8’ 2-1/2” Minimum packaging: 10 profiles

101 Technical profiles pro-dilata Profile for movement joints in ceramic floor coverings.

PVC profiles with a central elastic joint for the absorption of ten- sions in the ceramic floor. Available in several colours and joint widths, they are the best solution for creating intermediate move- ment joints.

Floor tile pro-dilata CFP

8 mm - 5/16 ‘‘

h pro-dilata CFL CFL CFL 8 mm KEA SAP h (mm) h (inches) B79211058 100005685 White 12.5 1/2 B79211059 100005686 Beige 12.5 1/2 B79211063 100005690 Beige 15 19/32 B79211060 100005687 Black 12.5 1/2 B79211064 100005691 Black 15 19/32 B79211061 100005688 Grey 12.5 1/2 B79211065 100005692 Grey 15 19/32 5mm - 13/64

h pro-dilata CFI pro-dilata CFI PVC 5 mm KEA SAP h (mm) h (inches) B79241142 100159078 Light grey 11 7/16 B79241134 100159080 Light grey 12.5 1/2 B79241143 100159076 Grey 11 7/16 B79241136 100159077 Grey 12.5 1/2 B79241135 100159081 Black 11 7/16 B79241133 100159082 Black 12.5 1/2 B79241144 100159074 Beige 11 7/16 B79241140 100159075 Beige 12.5 1/2

Profile length: 2500 mm - 8’ 2-1/2” Minimum packaging: 10 profiles

102 Technical profiles pro-dilata Profile for movement joints in ceramic floor coverings.

Metal profiles with a central elastic joint for the absorption of ten- sions in the ceramic floor. New pro-dilata is a 8 and 10 mm wide precast expansion joint for indoor and outdoor ceramic floors.

Floor tile

8 mm - 5/16 ‘‘

h pro-dilata stainless steel CFM stainless steel CFM 8 mm KEA SAP h (mm) h (inches) B79241091 100005715 12.5 1/2 B79241093 100005717 20 13/16

10 mm 3/8 ‘‘

h pro-dilata aluminium CFM aluminum

CFM 10 mm KEA SAP h (mm) h (inches) and skirtings Profiles B79221071 100005699 12.5 1/2 B79221072 100005700 15 19/32 B79221074 100005702 20 13/16

Profile length: 2500 mm - 8’ 2-1/2” Minimum packaging: 10 profiles

103 Technical profiles structural joints Profile for structural joints in ceramic floor coverings.

Metallic profiles with a central elastic joint that absorbs the structural movements of the support. Available with deformable polypropylene joint for pedestrian transit and moving metallic joint for wheeled transit.

Floor tile Floor tile

40 mm - 1 37/64’’

h structural joints BT structural joint BT BT-40 KEA SAP h (mm) h (inches) B79241098 100044392 Grey 18 23/32 B79241099 100044393 Grey 40 1-9/16 B80106001 100005730 Black 18 23/32 75 mm - 2 61/64

h structural joints AT structural joint AT AT-75 KEA SAP h (mm) h (inches) B80106004 100005733 18 23/32 B80106002 100005731 50 2

BT profile length: 3000 mm - 9’ 10-3/32 AT profile length: 3000 mm - 9’ 10-3/32

104 Technical profiles pro-step Profile for the making of stair steps. It substitutes the traditional step ceramic piece by a combination of ceramic tile and profile.

Metallic profiles that cover the non-glazed edge of the tile, protect it from shocks and reduce the risk of slipping.

Step Step

pro-step M1 h pro-step M2 h pro-step Stainless steel M2 KEA SAP h (mm) h (inches) B76341002 100005523 11 7/16 B76342002 100005525 Gloss 11 7/16

Anodized aluminium silver M1 KEA SAP h (mm) h (inches) B76322003 100005509 11 7/16 B76342003 100067688 13.5 17/32

35 mm - 1 3/8

h and skirtings Profiles pro-step pro-step PVC 35

PVC 35 KEA SAP h (mm) h (inches) B76111015 100005482 Grey 11 7/16

Profile length: 2500 mm - 8’ 2-1/2 Minimum packaging: 10 profiles

105 106 Adhesives

ADHESIVES cement-based adhesives 108 Tixocem 109 One-flex 110 Super-flex S2 reactive resins adhesive 112 Politech 113 Politech Premium 114 Linkflor fix façade fixings 115 Concealed facade fixings 107 Cement-based adhesives

tixocem tixocem is a single-component, thin-set mortar for interior installations of stone, ceramic, porcelain and quarry tile. This mortar is formulated with a unique dry poly- mer, resulting in good adhesion to the substrate and tile.

Single-component, high-tech adhesive for laying absorbent ceramic tiles. Excellent workability, easy to apply with extended working times. No sagging.

Certifications / Standards: EN 12004 C2 T ANSI: Exceeds ANSI A118.4

Features: Recommended uses:

• Single-component thin-set mortar • Most interior residential installations on floors and • Good adhesion to the substrate and tile. walls. • Open time > 20 min. • Most interior commercial installations on floors. • Inexpensive polymer-modified mortar. • Most interior commercial installations on walls. • Mixing water: 5.25 U.S. qt per 50 lbs. bag • Do not use in swimming pools or installations subject to prolonged water immersion. • tixocem is not recommended for areas subject to severe freeze/thaw conditions.

Substrates: Materials:

• Masonry cement block, brick, cement mortar beds • Ceramic and porcelain tiles (water absorption < 0.5% and leveling coats. according EN-ISO 10545-3). • Concrete (cured at least 28 days). • Quarry tiles • Cement backer units (CBUs). • Natural stone. • Gypsum wallboard for interior walls in dry areas only. • Do not use for porcelain tiles 17 3/8”x26” (44x66 cm) • Do not use directly over gypsum-based substrates. larger tiles. Over this kind of substrates apply suitable sealer • Do not use for moisture-sensitive stone, agglomerate before use. butech recommends super-prim tiles, DQS, cultured marble or resin-backed tiles • Do not use over dimensionally unstable substrates such as hardwood flooring, oriented strand board (OSB), substrates containing asbestos, or metal. • Do not use over hardwood, exterior grade plywood, vinyl covered wall board, plastic surfaces, glass, cement asbestos board, metal, particle board or asphalt sheeting.

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.

tixocem KEA Presentation Europallet B11903900 tixocem white 50 lbs. (22.7 kgs.) 3000 lb / pallet B11904900 tixocem gray 50 lbs. (22.7 kgs.) 3000 lb / pallet

108 Cement-based adhesives one-flex one-flex is a high tech single-component, high-performance, polymer-modified thin- set mortar for interior installations of tile. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. Formulated with low-dust technology, one-flex reduces dust by 90% during pouring and mixing, resulting in a cleaner environment. Advanced, high-performance adhesive, with an excellent adherence and flexibility, suitable for the most difficult installations, like high traffic floors, radiant heating floors. Its performance and ease of application make it the ideal solution for the most demanding professionals. Specially recommended for laying rectified tiles.

Certifications/Standards: ISO 13007 C2 E P1 ANSI: Exceeds ANSI A118.4 and A118.11

Features: Recommended uses:

• Single-component thin-set mortar • Most interior residential installations on floors and • Polymer-enriched for high performance and deform- walls. ability • Most interior commercial installations on floors and • Low-dust technology reduces dust by 90% resulting walls. in a cleaner environment. • Installation of ceramic and porcelain tile, quarry tile, • Smooth and creamy consistency for easy for easy pavers, and many types of marble, granite and natural application. stone. • Open time > 30 min. • Indoor swimming pools or interior installations sub- • Mixing water: 5.5 U.S. qt per 50 lbs. bag. ject to prolonged water immersion. • one-flex mixed with water is not recommended for Adhesives areas subject to severe freeze/thaw conditions.

Substrates: Materials:

• Masonry cement blocks, bricks, cement mortar beds • Ceramic and porcelain tiles ( water absorption < 0.5% and levelling coats. according EN-ISO 10545-3 ). • Concrete (cured at least 28 days). • Quarry tiles • Cement backer units (CBUs). • Glass and mosaic tiles • Gypsum wallboard for interior walls in dry areas only. • Natural stone. • APA and CANPLY Group 1 exterior-grade plywood • Do not use for moisture-sensitive stone, agglomerate (interior, residential and light commercial in dry con- tiles, DQS, cultured marble or resin-backed tiles. ditions only). • Properly prepared vinyl composition tile (VCT) and cutback residue (interior only). • Properly prepared existing ceramic and porcelain tile, quarry tile and pavers (interior only).

• Do not use directly over gypsum-based substrates. Over this kind of substrates apply suitable sealer before use. butech recommends super-prim

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet. one-flex KEA Presentation Europallet B12903900 one-flex white 50 lbs. (22.7 kgs.) 3000 lb / pallet B12904900 one-flex gray 50 lbs. (22.7 kgs.) 3000 lb / pallet

109 Cement-based adhesives super-flex S2 super-flex S2 is a type C2 E S2 high-performance no dust cement-based adhesive, as per EN 12004, for laying all kinds of ceramic tiles on the most used substrates in the building industry. Specially recommended for ceramic slabs type XLIGHT from URBATEK.

This adhesive features excellent performance in adherence and deformability with no need for mixing with additives and excellent conditions of use: low dust generation and an only 33 lbs. package. This state-of-the-art adhesive includes additives and polymers which increase performance. This means that with a 33 lbs. bag of super-flex S2 you can lay the same tiles surface than with a 50 lbs. bag of regular adhesive.

Certifications/Standards: EN 12004 C2 E S2

Features: Recommended uses:

• Cement-based, single component adhesive. • Interior and exterior walls with slim tiles as XLIGHT 3+ • Lightened adhesive. Low consumption onsite. • Floors and walls with XLight Premium • Low emission of dust and other airborne particles. • Large format indoor and outdoor ceramic wall tiles • Maximum adherence and deformability. • Large format indoor and outdoor porcelain floor tiles • High initial adherence and no sagging. Thixotropic. • High traffic floor tiles • Extended working times. Open time higher than 30 • Floor tiles on radiant heating min. • Pools and damp environments • Application thickness up to 10 mm - 3/8’’ • Frost-resistant. • Mixing water: 1.5 U.S. qt per 33 lbs bag

Substrates: Materials:

• Cement-based screeds • Large format ceramic tiles • Cement render • High-absorption ceramic tiles and stoneware • Concrete slabs and floors • Porcelain tiles • Anhydrite screeds, having previously applied super-prim • XLIGHT • Plasters, having previously applied super-prim • Glass mosaic • Pre-existing tiles/mosaic/stones* • Natural stone and marble not prone to staining • Plasterboard panels • DQS and other marble agglomerate • Cement-based panels • acoustic insulation lamitech n

* super-prim improves the adherence on polished ceramics and glossy finishing tiles Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet. super-flex S2 KEA SAP Presentation Europallet B12909017 100142757 super-flex s2 white 33 lbs. (15 kg) 1322 lb /pallet

110 Adhesives

111 Reactive resins adhesive politech n politech n is a type R2 T high-tech, two-component polyurethane adhesive as per EN 12004, for laying tiles on deformable substrates. Specially recommended for special substrates like metal sheets or synthetic materials, where cement-based adhesives cannot be used.

A high-tech two-component polyurethane adhesive with high performance proper- ties. Suitable for laying ceramic tiles of all kinds on deformable substrates.

Certifications/Standards: EN 12004 R2 T

Features: Recommended uses:

• Two-component polyurethane adhesive. • Laying of wall tiles not compatible with cement-based • Excellent adherence. Maximum deformability. adhesives • No water absorption. Waterproof. • Wall tiles on substrates not compatible with cement- • High chemical resistance. based adhesives • High initial adherence and no sagging. • Floor tiles on deformable substrates • Application thickness up to 8 mm-5/16”. • Floor tiles with special chemical resistance • Frost-resistant. • Pools and damp environments, steam rooms and spas • • Laying of slate and other natural stones with risk of deformation by water absorption. • Interior floors as DQS by L’ANTIC COLONIAL and other marble composites • KRION sheets

Substrates: Materials:

• Cement-based screeds • Large format ceramic tiles • Cement render • High-absorption ceramic tiles and stoneware • Concrete slabs and floors • Porcelain tiles • Anhydrite screeds • XLIGHT • Renders and plasterboards • Glass mosaic • Pre-existing tiles/mosaic/stones* • Natural stone and marble not prone to staining • Plasterboard panels • Natural stone and marble prone to staining • Cement-based panels • Slates and similar sensitive to contact with water • Wood panels • DQS and other marble agglomerate • Metal surfaces • KRION and other kinds of solid surface • Polyester or PVC surfaces • Glass surfaces

* super-prim improves the adherence on polished ceramics and glossy finishing tiles Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet. politech n KEA SAP Presentation Europallet B41061005 100138260 politech n blanco can 12 kg - 26.4 lb/bucket 576 kg/pallet - 1,267.2 lb/pallet

112 Reactive resins adhesive politech Premium politech Premium is a reactive resin adhesive that is super easy to handle and easy to use, especially when we need maximum bonding strength and deformability. It is suitable for most wall coverings and substrates used in construction, ensuring the correct installation of materials such as L’ANTIC COLONIAL’s AIRSLATE.

We work with it as a cement-based adhesive, but with the bonding, flexibility, and water resistance capabilities of a reactive resin adhesive. Professional use.

Certifications/Standards: EN 12004 R2 T

Features: Recommended use:

• Two-component reactive resins adhesive. • Laying of wall tiles not compatible with cement-based • Unbeatable workability; same as that of any adhesives cement-based adhesive. • Wall tiles on substrates not compatible with cement- • Maximum adherence and excellent flexibility; more based adhesives than 50 mm-1 31/32” in transversal deformability. • Floor tiles on deformable substrates • High wettability and long open time. • Floor tiles with special chemical resistance • Quick-drying: admits light traffic 6 hours after • Pools and damp environments, steam rooms and spas installation. • Stone sheets for wall coverings as AIRSLATE by L’ANTIC • Application thickness up to 15 mm-19/32”. COLONIAL • Laying of slate and other natural stones with risk of Adhesives deformation by water absorption.

Substrates: Materials:

• Substrates in concrete and cement or anhydrite mor- • Large format ceramic tiles tar. • High-absorption ceramic tiles and stoneware • Slabs and cement mortar or gypsum rendering. • Porcelain tiles • Plasterboard and wood panels. • XLIGHT • Existing wall tiles*. • Glass mosaic • Metal sheets. • Natural stone and marble not prone to staining • Surfaces painted with epoxy or polyurethane-based • Natural stone and marble prone to staining resins. • Slates and similar sensitive to contact with water • AIRSLATE • DQS and other marble agglomerate

* super-prim improves the adherence on polished ceramics and glossy finishing tiles Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet. politech Premium KEA SAP Presentation Europallet B41061008 100217753 politech Premium can 10 kg - 22 lb/bucket 330 kg/pallet - 726 lb/bucket

113 Reactive resins adhesive linkfloor fix linkfloor fix is a new acrylic adhesive for the installation of PVC, carpets, linoleums, LVT and rubbers applications. Specially recommended for Linkfloor from L’ANTIC COLONIAL. Its high initial grip allows gluing on walls and fixing PVC on PVC.

Certifications/Standards: EN 12004 R2 T

Characteristics: Recommended use:

• Solvent- and odour-free adhesive • Indoor floor and wall tiles. • Excellent adhesion and flexibility • High traffic floor tiles. • High initial grip, especially for wall applications • Floor tiles on radiant heating. • Resistant to high traffic such as hospitals or airports • Compatible with underfloor heating • Suitable for the installation of new PVC sheets on existing PVC flooring

Substrates: Materials:

• Cement covered floors and walls. • Decorative PVC Tiles (LVT). • Concrete slabs. • Homogeneous and multi-layer PVC (tiles or rolls). • Plasterboards. • PVC on cork. • Existing ceramic floor and wall tiles. • Polyolefins. • Existing parquet floors. • Linoleum in rolls. • Existing PVC floors. • Expanded vinyl with relief. • On fire-resistant or water-resistant wood panels, • Semiflexible tiles. apply super-prim. • Carpets with or without backing. • Carpets on foam (latex). • Carpets with non-woven backing. • Carpets with synthetic back (Action Back). • Especially indicated for LINKFLOOR from L’ANTIC COLONIAL

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet. * super-prim improves the adherence on polished ceramics and glossy finishing tiles

linkfloor fix

KEA SAP Presentation B13903004 100243761 20 Kg - 44 lb/bucket

114 Facade fixings

concealed facade fixings Innovative concealed fixing clip for ceramic tiles in bonded facades. The fixings fit Minimum I joint within small slots done on the porcelain piece and are anchored to the support by a stainless steel screw. Once the joints are grouted, the fixings are not visible anymore, not affecting the facade design. Minimum A/T joint 4 These fixings have been designed as a security element in porcelain tile walls installed by the thin layer, double bonding method. We recommend the use of type C2 S2 Minimum A/T joint 8 cement-based adhesives as per EN 12004.

As a general rule, we recommend this kind of fixing from a height corresponding to first concrete slab. In any case, standards in force must be observed for every project.

Features: Recommended uses:

• 1.4301 (AISI 304 V2A) stainless steel clips • Laying of tiles in facades. • Suitable for 5 mm-7 mm (3/16” - 9/32”) wide joints • Laying of ceramics in ceilings and cornices. • Suitable 9 mm-12mm (11/32” a 15/32”) thick tiles • Indoor laying of large format porcelain tiles at a cer- • Start fixings available in 80 mm (3 5/32”) and 160 mm tain height. (6 5/16”) lengths for overhanging installations • Includes stainless steel screw and plug Adhesives

Materials: Coverage:

• Large format ceramic tiles Coverage changes with every facade design. In the case • High-absorption ceramic tiles of a regular facade with no gaps, clip calculation would be • Porcelain tiles the following: • XLIGHT 3+ and XLIGHT Premium Tile Type I fixings Type A/T fixings cm ud/m2 ud/m2 43,5 x 65,9 5,6 1,4 Substrates: 44 x 66 5,5 1,4 • Cement-based screeds 60 x 60 4,5 1,1 45 x 90 4,0 1,0 60 x 120 3,4 0,8

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet. Screws and plugs included

concealed facade fixings

KEA SAP Presentation B80111001 100005743 minimum I joint bag 50 ud B80111002 100005744 minimum A/T joint 4 cm bag 50 ud B80111003 100005745 minimum A/T joint 8cm bag 50 ud 115 butech's adhesives

Selection tables for butech’s adhesives

SELECTION OF ADHESIVE FOR RESIDENTIAL INDOOR FLOORING AND PUBLIC PEDES- TRIAN PREMISES

Types of tiles (ISO 13006): BIa / BIb Rectified tiles, Porcelain tiles, STON-KER, PAR-KER, STARWOOD & URBATEK Length longest side of tile Type of substrate ≤ 11 3/4” ≤ 23 1/2” ≤ 35 1/4” > 35 1/4” Cement-based screed with radiant heating C2 C2 S1 C2 S2 Cement-based screed without radiant heating C1 C2 Anhydrite screed with radiant heating* C2 C2 S1 C2 S2 Anhydrite screed without radiant heating* C1 C2 Concrete slab or floor C2 C2 S1 Pre-existing tiles/mosaic/stones C2 Metal surfaces R1 –

* previous priming with C adhesives

SELECTION OF ADHESIVE FOR COMMERCIAL INDOOR FLOORING OR FOR INDUSTRIAL USE WITH MECHANICAL REQUIREMENTS

Types of tiles (ISO 13006): BIa / BIb Rectified tiles, Porcelain tiles, STON-KER, PAR-KER, STARWOOD & URBATEK Length longest side of tile Type of substrate ≤ 11 3/4” ≤ 23 1/2” ≤ 35 1/4” > 35 1/4”

Cement-based screed with radiant heating C2 C2 S1 C2 S2 Cement-based screed without radiant heating C2 C2 S1 Concrete slab or floor C2 C2 S1 Pre-existing tiles/mosaic/stones C2 C2 S1 Metal surfaces R1 R2 –

SELECTION OF ADHESIVE FOR OUTDOOR FLOORING

Types of tiles (ISO 13006): BIa Rectified tiles, Porcelain tiles, STON-KER, PAR-KER, STARWOOD & URBATEK Length longest side of tile Type of substrate ≤ 11 3/4” ≤ 23 1/2” ≤ 35 1/4” > 35 1/4”

Cement-based screed without radiant heating C2 C2 S1 C2 S2 Concrete slab or floor C2 C2 S1 C2 S2 Pre-existing tiles/mosaic/stones C2 S1 C2 S1 C2 S2 Metal surfaces R1 R2 –

116 butech's adhesives

SELECTION OF ADHESIVE FOR INDOOR WALLS

Types of tiles (ISO 13006): BIa Porcelain tiles, STON-KER, PAR-KER, STARWOOD & URBATEK Length longest side of tile Type of substrate ≤ 11 3/4” ≤ 23 1/2” ≤ 35 1/4” > 35 1/4” Lime/cement-based plaster with radiant heating C2 / D1 C2 S1 C2 S2 Lime/cement-based plaster without radiant heating C1 / D1 C2 Gypsum-based plaster with radiant heating* C2 / D1 C2 S1 C2 S2 Gypsum-based plaster without radiant heating* C1 / D1 C2 Large-format ceramic brick C1 C2 Concrete C2 / D1 C2 C2 S1 Pre-existing tiles/mosaic/stones C2 C2 S1 Cement/fiber cement -based panels C1 / D1 C2 C2 S1 Wood surfaces C2 / D1 / R1 C2 S1 / R1 – Plasterboard panels C1 / D1 C2 C2 S1 – Metal surfaces R1 – * previous priming with C adhesives

Types of tiles (ISO 13006): BIII Monoporous, Rectified monoporous Length longest side of tile Adhesives Type of substrate ≤ 11 3/4” ≤ 23 1/2” ≤ 35 1/4” > 35 1/4” Lime/cement-based plaster with radiant heating C2 / D1 C2 S1 C2 S2 Lime/cement-based plaster without radiant heating C1 / D1 C1 C2 Gypsum-based plaster with radiant heating* C2 / D1 C2 S1 C2 S2 Gypsum-based plaster without radiant heating* C1 / D1 C1 C2 Large-format ceramic brick C1 C1 C2 Concrete C1 C2 C2 S1 Pre-existing tiles/mosaic/stones C2 C2 S1 Cement/fiber cement -based panels C1 / D1 C2 C2 S1 Wood surfaces C2 / D1 / R1 C2 S1 / R1 – Plasterboard panels C1 / D1 C2 C2 S1 – Metal surfaces R1 – * previous priming with C adhesives

SELECTION OF ADHESIVE FOR OUTDOOR WALLS AND CEILINGS

Types of tiles (ISO 13006): BIa / BIII Monoporous, Rectified monoporous, Porcelain tiles, STON-KER, PAR-KER, STARWOOD & URBATEK Length longest side of tile Type of substrate ≤ 11 3/4” ≤ 23 1/2” ≤ 35 1/4” > 35 1/4” Lime/cement-based plaster C2 S1 C2 S1 C2 S2 Concrete C2 S1 C2 S2 Cement/fiber cement -based panels C2 S1 C2 S2 – Metal surfaces R1 R2 –

117 butech's adhesives

Selection tables for butech’s adhesives

SELECTION OF ADHESIVE FOR WALL COVERINGS AND FLOORING WITH CERAMIC PLATES Types of tiles (ISO 13006): BIa XLIGHT & XLIGHT Premium No fiber With fiber Type of substrate ≤ 27 1/2” > 27 1/2” ≤ 27 1/2” > 27 1/2” Indoor flooring and wall C2 C2 S1 C2 S1 C2 S2 Outdoor or heated flooring C2 S2 Facade C2 S1 C2 S2 R2 Highly deformable substrates R2

SELECTION OF ADHESIVE FOR FLOORING AND WALL COVERINGS WITH MOSAICS No mesh With mesh Type of substrate Vitreous & Natural Wood & Vitreous & Natural Wood & ceramics stone metal ceramics stone metal Indoor flooring and wall without presence of C2 C2 S1 F R2 C2 S1 C2 S1 F R2 water Indoor flooring and wall with presence of water C2 S1 C2 S1 F R2 C2 S1 C2 S1 F R2 Pools C2 S2 C2 S2 – – – – Highly deformable substrates R2 R2

SELECTION OF ADHESIVE FOR FLOORING AND WALL COVERINGS WITH NATURAL STONE Stain resistant Sensitive to stains Slate and similar DQS** Type of substrate ≤ > ≤ > ≤ > 23 1/2” 23 1/2” 23 1/2” 23 1/2” 11 3/4” 11 3/4” Indoor flooring and wall without presence of C2 C2 S1 C2 F C2 S1 F C2 S1 F R2 C2 S2 F water Indoor flooring and wall with presence of water C2 S1 C2 S2 C2 S1 F C2 S2 F C2 S2 F R2 – Outdoor or heated flooring C2 S2 C2 S2 C2 S2 F C2 S2 F C2 S2 F R2 – Pools C2 S2 C2 S2 C2 S2 F C2 S2 F C2 S2 F R2 – Highly deformable substrates R2

* Meshed natural stone plates: Check with butech’s Technical Department ** In floors with direct sunlight, use R2 adhesives

118 butech's adhesives

Coverage tables for butech’s adhesives depending on the notched trowel used

ADHESIVE COVERAGE lb/sq ft U3 U4 U6 U8 U10 U12 10U Type of adhesive 1/8”x1/8” 5/32”x5/32” 1/4”x1/4” 5/16”x5/16” 3/8”x3/8” 1/2”x1/2” R 3/8”x3/8” tixocem 0.41 - 0.62 0.62 - 0.82 0.82 - 1.03 1.03 - 1.23 tixocem plus 0.41 - 0.62 0.62 - 0.82 0.82 - 1.03 1.03 - 1.23 flexitec n 0.41 - 0.62 0.62 - 0.82 0.82 - 1.03 1.03 - 1.23 fr-one n 0.41 - 0.62 0.62 - 0.82 0.82 - 1.03 1.03 - 1.23 1.23 - 1.44 one-flex premium 0.41 - 0.62 0.62 - 0.82 0.82 - 1.03 1.03 - 1.23 1.23 - 1.44 super-one n 0.41 - 0.62 0.62 - 0.82 0.82 - 1.03 1.03 - 1.23 1.23 - 1.44 super-flex s2 0.21 - 0.41 0.41 - 0.62 0.62 - 0.82 0.82 - 1.03 1.03 - 1.23 rapimax n 1.23 - 1.44 1.23 - 1.44 maxifluid 1.23 - 1.44 1.23 - 1.44 bt-3000 n 0.41 - 0.62 0.62 - 0.82 0.82 - 1.03 politech n 0.21 - 0.41 0.41 - 0.62 0.62 - 0.82 0.82 - 1.03 politech premium 0.21 - 0.41 0.41 - 0.62 0.62 - 0.82 0.82 - 1.03

RECOMMENDED NOTCHED TROWEL U3 U4 U6 U8 U10 U12 10U Type of ceramics inch. x inch. 1/8”x1/8” 5/32”x5/32” 1/4”x1/4” 5/16”x5/16” 3/8”x3/8” 1/2”x1/2” R 3/8”x3/8” Monoporous 12”x8” x x Monoporous 12”x17” x x x Monoporous 12”x23” x x x x Monoporous 12”x35” x x x x x

Monoporous 17”x47” x x x x Adhesives

PAR-KER 8”x26” x x x x PAR-KER 6”x35” x x x PAR-KER 9”x35” x x x PAR-KER 7”x47” x x x x x PAR-KER 11”x47” x x x x x STARWOOD 10”x59” x x x x x PAR-KER 7”x71” x x x x x PAR-KER 11”x71” x x x x x

URBATEK 12”x24” x x x x URBATEK 16”x16” x x x x STON-KER 17”x17” x x x x STON-KER 17”x26” x x x x x STON-KER 17”x35” x x x x x STON-KER / URBATEK 23”x23” x x x x x STON-KER / URBATEK 32”x32” x x x x x STON-KER / URBATEK 24”x47” x x x x STON-KER / URBATEK 47”x47” x x x x

XLIGHT 39”x118” x x x x x XLIGHT Premium 47”x47” x x x x x XLIGHT Premium 47”x98” x x x x x XLIGHT Premium 59”x126” x x x x x

MOSAICS x x x AIRSLATE 47”x95” x x

x Recommended trowel with standard conditions

119

126 130 136 128 124 134 122 132 micro-stuk design MICRO-STUK micro-stuk wenge micro-stuk moka micro-stuk beige micro-stuk white micro-stuk cement micro-stuk manhattan micro-stuk grey micro-stuk snow

micro-stuk design micro-stuk design

Handcrafted PORCELANOSA Finish Make your project unique

Kit micro-stuk primer-stuk base- stuk fine-stuk decor-stuk sealer-stuk protec-stuk micro-stuk fine 17 U.S. oz 22lb 5.5lb 169 U.S. oz 17 U.S. oz 20 U.S. oz micro-stuk nature 17 U.S. oz 22lb - 169 U.S. oz 17 U.S. oz 37 U.S. oz micro-stuk design kits contain enough materials to cover at least 53 SQ FT surface.

122 micro-stuk snow High quality cement rendering. Only 2 mm - 5/64’ thick

kit micro-stuk fine snow B51201040 100242470 Smooth finish micro-stuk design micro-stuk

kit micro-stuk nature snow B51201043 100242419 Rough finish

Special piece: Skirting board pro-skirting micro-stuk snow B79999061 100202266 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” pro-skirting micro-stuk snow B79999060 100202257 12x100x1800 mm - - 15/32”x3-15/16”x5’ 10-7/8” pro-skirting fixing clips B70104237 100193608 17x30 mm - 21/32”x1-3/16” (50 ud)

Colours are representative only and do not replicate the exact shade of the product. Please consult samples to choose colour.

123 micro-stuk design

Handcrafted PORCELANOSA Finish Make your project unique

Kit micro-stuk primer-stuk base- stuk fine-stuk decor-stuk sealer-stuk protec-stuk micro-stuk fine 17 U.S. oz 22lb 5.5lb 169 U.S. oz 17 U.S. oz 20 U.S. oz micro-stuk nature 17 U.S. oz 22lb - 169 U.S. oz 17 U.S. oz 37 U.S. oz micro-stuk design kits contain enough materials to cover at least 53 SQ FT surface.

124 micro-stuk grey High quality cement rendering. Only 2 mm - 5/64’ thick

kit micro-stuk fine grey B51201053 100242460 Smooth finish micro-stuk design micro-stuk

kit micro-stuk nature grey B51201046 100242472 Rough finish

Special piece: Skirting board pro-skirting micro-stuk grey B79999041 100193614 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” pro-skirting micro-stuk grey B79999012 100189376 12x100x1800 mm - - 15/32”x3-15/16”x5’ 10-7/8” pro-skirting fixing clips B70104237 100193608 17x30 mm - 21/32”x1-3/16” (50 ud)

Colours are representative only and do not replicate the exact shade of the product. Please consult samples to choose colour.

125 micro-stuk design

Handcrafted PORCELANOSA Finish Make your project unique

Kit micro-stuk primer-stuk base- stuk fine-stuk decor-stuk sealer-stuk protec-stuk micro-stuk fine 17 U.S. oz 22lb 5.5lb 169 U.S. oz 17 U.S. oz 20 U.S. oz micro-stuk nature 17 U.S. oz 22lb - 169 U.S. oz 17 U.S. oz 37 U.S. oz micro-stuk design kits contain enough materials to cover at least 53 SQ FT surface.

126 micro-stuk manhattan High quality cement rendering. Only 2 mm - 5/64’ thick

kit micro-stuk fine manhattan B51201048 100242451 Smooth finish micro-stuk design micro-stuk

kit micro-stuk nature manhattan B51201039 100242464 Rough finish

Special piece: Skirting board pro-skirting micro-stuk manhattan B79999059 100202246 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” pro-skirting micro-stuk manhattan B79999058 100202256 12x100x1800 mm - - 15/32”x3-15/16”x5’ 10-7/8” pro-skirting fixing clips B70104237 100193608 17x30 mm - 21/32”x1-3/16” (50 ud)

Colours are representative only and do not replicate the exact shade of the product. Please consult samples to choose colour.

127 micro-stuk design

Handcrafted PORCELANOSA Finish Make your project unique

Kit micro-stuk primer-stuk base- stuk fine-stuk decor-stuk sealer-stuk protec-stuk micro-stuk fine 17 U.S. oz 22lb 5.5lb 169 U.S. oz 17 U.S. oz 20 U.S. oz micro-stuk nature 17 U.S. oz 22lb - 169 U.S. oz 17 U.S. oz 37 U.S. oz micro-stuk design kits contain enough materials to cover at least 53 SQ FT surface.

128 micro-stuk cement High quality cement rendering. Only 2 mm - 5/64’ thick

kit micro-stuk fine cement B51201045 100242481 Smooth finish micro-stuk design micro-stuk

kit micro-stuk nature cement B51201044 100242491 Rough finish

Special piece: Skirting board pro-skirting micro-stuk cement B79999035 100193626 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” pro-skirting micro-stuk cement B79999015 100189368 12x100x1800 mm - - 15/32”x3-15/16”x5’ 10-7/8” pro-skirting fixing clips B70104237 100193608 17x30 mm - 21/32”x1-3/16” (50 ud)

Colours are representative only and do not replicate the exact shade of the product. Please consult samples to choose colour.

129 micro-stuk design

Handcrafted PORCELANOSA Finish Make your project unique

Kit micro-stuk primer-stuk base- stuk fine-stuk decor-stuk sealer-stuk protec-stuk micro-stuk fine 17 U.S. oz 22lb 5.5lb 169 U.S. oz 17 U.S. oz 20 U.S. oz micro-stuk nature 17 U.S. oz 22lb - 169 U.S. oz 17 U.S. oz 37 U.S. oz micro-stuk design kits contain enough materials to cover at least 53 SQ FT surface.

130 micro-stuk white High quality cement rendering. Only 2 mm - 5/64’ thick

kit micro-stuk fine white B51201051 100242453 Smooth finish micro-stuk design micro-stuk

kit micro-stuk nature white B51201052 100242490 Rough finish

Special piece: Skirting board pro-skirting micro-stuk white B79999038 100193613 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” pro-skirting micro-stuk white B79999013 100189367 12x100x1800 mm - - 15/32”x3-15/16”x5’ 10-7/8” pro-skirting fixing clips B70104237 100193608 17x30 mm - 21/32”x1-3/16” (50 ud)

Colours are representative only and do not replicate the exact shade of the product. Please consult samples to choose colour.

131 micro-stuk design

Handcrafted PORCELANOSA Finish Make your project unique

Kit micro-stuk primer-stuk base- stuk fine-stuk decor-stuk sealer-stuk protec-stuk micro-stuk fine 17 U.S. oz 22lb 5.5lb 169 U.S. oz 17 U.S. oz 20 U.S. oz micro-stuk nature 17 U.S. oz 22lb - 169 U.S. oz 17 U.S. oz 37 U.S. oz micro-stuk design kits contain enough materials to cover at least 53 SQ FT surface.

132 micro-stuk beige High quality cement rendering. Only 2 mm - 5/64’ thick

kit micro-stuk fine beige B51201042 100242463 Smooth finish micro-stuk design micro-stuk

kit micro-stuk nature beige B51201049 100242429 Rough finish

Special piece: Skirting board pro-skirting micro-stuk beige B79999039 100193625 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” pro-skirting micro-stuk beige B79999011 100189383 12x100x1800 mm - - 15/32”x3-15/16”x5’ 10-7/8” pro-skirting fixing clips B70104237 100193608 17x30 mm - 21/32”x1-3/16” (50 ud)

Colours are representative only and do not replicate the exact shade of the product. Please consult samples to choose colour.

133 micro-stuk design

Handcrafted PORCELANOSA Finish Make your project unique

Kit micro-stuk primer-stuk base- stuk fine-stuk decor-stuk sealer-stuk protec-stuk micro-stuk fine 17 U.S. oz 22lb 5.5lb 169 U.S. oz 17 U.S. oz 20 U.S. oz micro-stuk nature 17 U.S. oz 22lb - 169 U.S. oz 17 U.S. oz 37 U.S. oz micro-stuk design kits contain enough materials to cover at least 53 SQ FT surface.

134 micro-stuk moka High quality cement rendering. Only 2 mm - 5/64’ thick

kit micro-stuk fine moka B51201050 100242492 Smooth finish micro-stuk design micro-stuk

kit micro-stuk nature moka B51201038 100242471 Rough finish

Special piece: Skirting board pro-skirting micro-stuk moka B79999044 100193628 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” pro-skirting micro-stuk moka B79999014 100189369 12x100x1800 mm - - 15/32”x3-15/16”x5’ 10-7/8” pro-skirting fixing clips B70104237 100193608 17x30 mm - 21/32”x1-3/16” (50 ud)

Colours are representative only and do not replicate the exact shade of the product. Please consult samples to choose colour.

135 micro-stuk design

Handcrafted PORCELANOSA Finish Make your project unique

Kit micro-stuk primer-stuk base- stuk fine-stuk decor-stuk sealer-stuk protec-stuk micro-stuk fine 17 U.S. oz 22lb 5.5lb 169 U.S. oz 17 U.S. oz 20 U.S. oz micro-stuk nature 17 U.S. oz 22lb - 169 U.S. oz 17 U.S. oz 37 U.S. oz micro-stuk design kits contain enough materials to cover at least 53 SQ FT surface.

136 micro-stuk wenge High quality cement rendering. Only 2 mm - 5/64’ thick

kit micro-stuk fine wenge B51201047 100242452 Smooth finish micro-stuk design micro-stuk

kit micro-stuk nature wenge B51201041 100242480 Rough finish

Special piece: Skirting board pro-skirting micro-stuk wenge B79999063 100202258 12x60x1800 mm - 15/32”x2-3/8”x5’ 10-7/8” pro-skirting micro-stuk wenge B79999062 100202267 12x100x1800 mm - - 15/32”x3-15/16”x5’ 10-7/8” pro-skirting fixing clips B70104237 100193608 17x30 mm - 21/32”x1-3/16” (50 ud)

Colours are representative only and do not replicate the exact shade of the product. Please consult samples to choose colour.

137 138 GROUTING MATERIAL AND ELASTIC SEALANTS cement-based materials for tile joints 14 0 Colorstuk 0-4 Grouting material and elastic sealants Grouting 141 Colorstuk especial n 142 Colorstuk rapid n epoxy grouting materials 144 Epotech aqua 145 Epotech nature 14 6 Epotech crystal elastic joint sealants 147 S-107 n 148 S-502 n 149 P-404 leveling system for ceramic tiles 150 Self-leveling spacers 139 Cement-based materials for tile joints colorstuk 0-4 n colorstuk 0-4 n is a type CG 2 fine grain grouting material as per EN 13888, for grout- ing joints up to 4 mm - 3/16’’. It is easy to apply, resistant and color stable, and it is specially recommended for rectified tiles.

A high-tech, fine grained colored mortar for grouting tile joints from 0 to 4 mm - 3/16’’. Suitable for all kinds of ceramic tiles and natural stone. Indoors and outdoors.

Certifications/Standards: EN 13888 CG2 AW

Features: Recommended uses:

• Cement-based, single-component, colored mortar. • Tile joints up to 4 mm - 3/16’’. • Fine texture mortar for grouting tile joints up to 4 mm • Indoor wall tile coverings. Specially recommended for - 3/16’’. rectified tiles. • Easy to apply and clean. • Indoor floor tiles, including public buildings. • Resistant to heat and UV radiation. • Frost-resistant. In the following applications, replace mixing water by • Wide color range. cl-stuk additive: • Mixing water: • Outdoor floors. colorstuk 0-4 n white 0.4 GAL per 11 lb bag. • High traffic floor tiles. colorstuk 0-4 n color 0.3 GAL per 11 lb bag. • Floor tiles on radiant heating. • Pools and damp environments.

Substrates: Materials:

• All usual substrates for ceramic tiles laying. • Absorbent and non-absorbent ceramic tiles, including porcelain tiles. • Glass mosaic. • Natural stone and marble not prone to staining.

In the following applications, replace mixing water by cl-stuk additive: • Wall tiles with mosaic-like patterns. • DQS slabs and other kinds of marble agglomerate.

colorstuk 0-4 n KEA SAP Presentation Europallet B21522237 100236442 blanco bag 11 lb 880 lb/pallet B21522253 100236806 gris bag 11 lb 880 lb/pallet B21522238 100236461 manhattan bag 11 lb 880 lb/pallet B21522240 100236462 cemento bag 11 lb 880 lb/pallet B21522244 100236409 antracita bag 11 lb 880 lb/pallet B21522242 100236472 negro bag 11 lb 880 lb/pallet B21522241 100236480 marfil bag 11 lb 880 lb/pallet B21522243 100236419 beige bag 11 lb 880 lb/pallet B21522245 100236446 marrón bag 11 lb 880 lb/pallet B21522254 100236807 moka bag 11 lb 880 lb/pallet Colors shown are approximate. There are physical samples available to customers for checking the real grout color. Coverage of grouting material, consult the product data sheet

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet. 140 Cement-based materials for tile joints colorstuk especial n colorstuk especial n is a type CG 2 very fine grain grouting material as per EN 13888, for grouting joints up to 4 mm. Its formula includes ultrafine aggregates, which make it specially recommended for tiles with a glaze sensitive to scratching.

A high-tech, fine grained colored mortar for grouting tile joints up to 4 mm - 3/16’’. Specially recommended for grouting rectified ceramic tiles sensible to scratching. and ceramic parquet flooring

Certifications/Standards: EN 13888 CG2 AW

Features: Recommended uses:

• Cement-based, single-component, colored mortar. • Tile joints up to 4 mm - 3/16’’. • Ultrafine aggregates formula. • Ceramic tiles with low hardness glaze as per Mohs • Fine texture mortar for grouting tile joints up to 4 mm scale. - 3/16’’. • Indoor wall tile coverings. Specially recommended for • Easy to apply and clean. rectified tiles. • Resistant to heat and UV radiation. • Indoor floor tiles, including public buildings. • Frost-resistant. • Wide special colors range. In the following applications, replace mixing water with cl-stuk additive: • Wall and floor tiles into direct contact with water. • Floor tiles on radiant heating.

Substrates: Materials:

• All usual substrates for ceramic tiles laying. • Absorbent and non-absorbent ceramic tiles. • Ceramic tiles with special finishes. • Glass mosaic.

• Natural stone and marble not prone to staining. material and elastic sealants Grouting • Do not use on polished materials. In the following applications, replace mixing water by cl-stuk additive: • Wall tiles with mosaic-like patterns. • DQS slabs and other kinds of marble agglomerate colorstuk especial n KEA SAP Presentation Europallet B24302054 100238251 dark bag 4.4 lb 950 lb/pallet B24302056 100238261 moka bag 4.4 lb 950 lb/pallet B24302057 100238235 nacare bag 4.4 lb 950 lb/pallet B24302059 100238229 vainilla bag 4.4 lb 950 lb/pallet B24302055 100238236 white bag 4.4 lb 950 lb/pallet B24302058 100238260 graphite bag 4.4 lb 950 lb/pallet B21522231 100204245 ash bag 4.4 lb 950 lb/pallet B21522232 100204254 beech bag 4.4 lb 950 lb/pallet B21522235 100204255 oak bag 4.4 lb 950 lb/pallet B21522234 100204261 honey bag 4.4 lb 950 lb/pallet B21522233 100204260 doussie bag 4.4 lb 950 lb/pallet B21522236 100204554 antracita bag 4.4 lb 950 lb/pallet B24302052 100234451 elm bag 4.4 lb 950 lb/pallet B24302053 100234433 wenge bag 4.4 lb 950 lb/pallet B51201055 100243271 maple bag 4.4 lb 950 lb/pallet B51201054 100243281 iroko bag 4.4 lb 950 lb/pallet

Colors shown are approximate. There are physical samples available to customers for checking the real grout color. Coverage of grouting material, consult the product data sheet

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet. 141 Cement-based materials for tile joints colorstuk rapid n colorstuk rapid n is a type CG 2 high-performance, cement-based grouting mate- rial as per EN 13888, for grouting joints up to 15 mm - 11/4’’. Suitable for all kinds of ceramic tiles and natural stone, it is specially recommended for outdoor applications and permanently damp environments .

A high-tech, fine grained colored mortar with fast setting and hardening times for grouting tile joints up to 15 mm - 11/4’’. Suitable for all kinds of ceramic tiles and natu- ral stone. Indoors and outdoors.

Certifications/Standards: EN 13888 CG2 AW

Features: Recommended uses:

• Cement-based, single-component, colored mortar. • Tile joints up to 15 mm - 19/32” • Fine texture mortar for grouting tile joints up to 15 • Indoor wall and floor tiles. mm - 11/4’’. • Outdoor floors and terraces. • Mortar with fast setting and hardening times. • High traffic floor tiles. • It prevents efflorescences. • Floor tiles on radiant heating. • Excellent mechanical resistance. • Pools and damp environments. • Resistant to heat and UV radiation. • Outdoor wall tiles in facades. • Frost-resistant. • Waterproof mortar. • Anti-mold action. • Easy to apply and clean. • Wide color range. • Mixing water: colorstuk rapid n 0.29 GAL per 11 lb bag. Substrates: Materials:

• All usual substrates for ceramic tiles laying. • Absorbent and non-absorbent ceramic tiles, includ- ing porcelain tiles. • Tiles with mosaic-like patterns. • Glass mosaic. • Clay and terracotta tiles. • Natural stone and marble not prone to staining. colorstuk rapid n KEA SAP Presentation Europallet B21522247 100236463 blanco bag 11 lb 880 lb/pallet B21522248 100236464 manhattan bag 11 lb 880 lb/pallet B21522249 100236449 cemento bag 11 lb 880 lb/pallet B21522250 100236481 antracita bag 11 lb 880 lb/pallet B21522251 100236475 negro bag 11 lb 880 lb/pallet B21522259 100236833 caramelo bag 11 lb 880 lb/pallet B21522257 100236794 marfil bag 11 lb 880 lb/pallet B21522261 100236809 marron bag 11 lb 880 lb/pallet B21522255 100236823 tabaco bag 11 lb 880 lb/pallet B21522258 100236834 gris bag 11 lb 880 lb/pallet B21522252 100236808 beige bag 11 lb 880 lb/pallet B21522260 100236824 moka bag 11 lb 880 lb/pallet

Colors shown are approximate. There are physical samples available to customers for checking the real grout color. Coverage of grouting material, consult the product data sheet

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.

142 Grouting material and elastic sealants Grouting

143 Epoxy grouting materials

epotech aqua epotech aqua is a new line of epoxy putties for grouting tile joints. Two-component epoxy putty with no organic solvents. It is waterproof, it has outstanding chemical and mechanical properties and it is easy to apply. Specially recommended for application on mosaics and ceramic tiles with relief.

This material is suitable for grouting joints from 0 to 10 mm - 3/8’’ in floor and wall tiles, indoors and out. Excellent resistance to chemicals. Suitable for pools and perma- nently damp environments. Suitable as high adherence grouting material for ceramic tiles with any absorption level and format, for glass mosaic or natural stone.

Features: Recommended use:

• Two-component colored epoxy putty. • Tile joints with uniform color and shade, resistant to • Easy to apply and clean. This product is free of organic the passing of time. solvents and plasticizers • Floorings with built-in heating. • Excellent joint color stability. • Pools and damp environments. • Resistance to most chemicals and alkali, even in high • High traffic floor tiles concentrations. • Outdoor floorings protected against the presence of • Waterproof joint, no water absorption. rising moisture • Excellent adherence and mechanical resistance. • Floorings and wall coverings in direct contact with • Tile joints up to 10 mm - 3/8’’. chemicals. See technical sheet. • Wide color range.

Substrates: Materials:

• All usual substrates for ceramic tiles laying. • Absorbent and non-absorbent ceramic tiles, includ- ing porcelain tiles. • Tiles with mosaic-like patterns. Please refer to PORCELANOSA / VENIS catalogues. • Glass mosaic. • Natural stone and marble not prone to staining.

epotech aqua KEA SAP Presentation Europallet B42562036 100182213 antracita 7.93 lb can 634.40 lb/pallet B42562039 100182223 blanco 7.93 lb can 634.40 lb/pallet B42562038 100182208 gris 7.93 lb can 634.40 lb/pallet B42562040 100182217 marfil 7.93 lb can 634.40 lb/pallet

Coverage of grouting material, consult the product data sheet

Colors shown are approximate. There are physical samples available to customers for checking the real grout color.

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.

144 Epoxy putty for joints

epotech nature epotech nature is a new micro grain porcelain grout for the sealing of joints in ceramic tiles with designs inspired by nature. It has been specially developed for porcelain tiles that reproduce the appearance and texture of wood, such as PORCELANOSA Group’s PAR-KER. Professional use.

This material is suitable for grouting tile joints up to 5 mm - 13/64’’. in floorings and wall coverings, both indoors and outdoors. Excellent resistance to chemicals. Suitable for pools and permanently damp environments. Suitable as high adherence grouting material for ceramic tiles with any absorption level and format, for glass mosaic, or natural stone.

Characteristics: Recommended use:

• Two-component colored epoxy putty. • Floorings and wall coverings in natural wood-inspired • Easy to apply and clean. This product is free of organic ceramics. solvents and plasticizers. • Tile joints with uniform color and shade, resistant to • Excellent joint color stability. the passing of time. • Resistance to most chemicals and alkali, even in high • Floorings with built-in heating. concentrations. • Pools and damp environments. • Waterproof joint, no water absorption. • High traffic floor tiles • Excellent adherence and mechanical resistance. • Outdoor floorings protected against the presence of Hypoallergenic and bacteriostatic. rising moisture • Tile joints up to 5 mm - 13/64’’ . • Floorings and wall coverings in direct contact with • Wide range of colors inspired by natural woods. chemicals. See technical sheet.

Substrates: Materials: Grouting material and elastic sealants Grouting

• All usual substrates for laying ceramic tiles. • Ceramic tiles with designs inspired by nature • Absorbent and non-absorbent ceramic tiles, including porcelain tiles. • Tiles with mosaic-like patterns. Please refer to PORCELANOSA / VENIS catalogues. • Glass mosaic. • Natural stone and marble not prone to stain- ing. epotech nature KEA SAP Presentation Europallet B42562034 100177485 wenge 2.40 lb can 694.45 lb/pallet B42562029 100177512 doussie 2.40 lb can 694.45 lb/pallet B42562033 100177505 iroko 2.40 lb can 694.45 lb/pallet B42562035 100177484 oak 2.40 lb can 694.45 lb/pallet B42562028 100177513 elm 2.40 lb can 694.45 lb/pallet B42562031 100177494 beech 2.40 lb can 694.45 lb/pallet B42562032 100177504 ash 2.40 lb can 694.45 lb/pallet B42562030 100177514 maple 2.40 lb can 694.45 lb/pallet B42562041 100204262 honey 2.40 lb can 694.45 lb/pallet

Coverage of grouting material, consult the product data sheet

Colors shown are approximate. There are physical samples available to customers for checking the real grout color.

Before using this product in any application not indicated in this catalog, please carry out a test or refer to the product's technical sheet.

145 Epoxy grouting materials epotech crystal epotech crystal is an epoxy putty for grouting tile joints. Two-component putty with a translucent finish. It reflects the color of the tile or mosaic surrounding the joint. It features all the properties of epoxy putties: watertightness, high resistance to chemicals and mechanical properties. Specially recommended for application on mosaics and ceramic tiles with relief. Extra fine, micro grain porcelain grout.

This material is suitable for grouting joints up to 5 mm - 13/64’’ in floor and wall tiles indoors. Excellent resistance to chemicals in high concentrations. Suitable for perma- nently damp environments.

Certifications/Standards: EN 13888 RG

Features: Recommended uses:

• Extra fine, micro grain porcelain grout. • Wall and floor tiles with minimum joint. • Easy to apply and clean epoxy putty. • Indoor floor and wall tiles. • Translucent appearance. • Mosaic or natural stone wall coverings. • High resistance to most acids and alkali, even in high • Wall tiles and mosaics with glass elements. concentrations. • PAR-KER y STARWOOD floor coverings. • Waterproof joint, no water absorption. • Technical, porcelain floor coverings. • Excellent adherence and mechanical resistance. • Prevents the development of fungi and bacteria. • Tile joints up to 5 mm - 13/64’’.

Substrates: Materials:

• All usual substrates for ceramic tiles laying. • Absorbent and non-absorbent ceramic tiles, includ- ing porcelain tiles. • Glass mosaic. • Wall tiles and mosaics with glass elements. • Natural stone and marble not prone to staining.

epotech crystal KEA SAP Presentation Europallet B42562025 100126899 crystal can 6.61 lb 650.36 lb/pallet

Coverage of grouting material, consult the product data sheet

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.

146 Elastic joint sealants

s-107 n s-107 n is a neutral silicone putty for sealing joints. Specially recommended for seal- ing movement joints. Indoor and outdoor use.

This putty crosslinks in contact with dampness and does not give off odors, thus be- coming an elastomer highly elastic and resistant to atmospheric agents.

Features: Recommended uses:

• Single-component neutral silicone. • Sealing joints even between materials sensible to • High elasticity. chemical attack. • Good adherence. • Sealing movement joints in floors and walls. • Resistant to UV rays. • Sealing joints in ceramics, glass, metal and plastics. • Frost-resistant. • Sealing perimeter joints in wall tile coverings. • Gluing ceramic materials on wood boards.

Substrates: Materials:

• All usual substrates for ceramic tiles laying. • Ceramic tiles and glass mosaic. Grouting material and elastic sealants Grouting • Glass. • Metal. • 1.5 Plastic material, PVC. Coverage = • Concrete slabs. (feet/cartridge) joint width (in) x joint depth (in) • Wood.

s-107 n KEA SAP Presentation Packaging B82302001 100005814 s-107 n blanco cartridge 0.08 GAL 25 ud/box B82302002 100005815 s-107 n transparente cartridge 0.08 GAL 25 ud/box B82302003 100005816 s-107 n gris cartridge 0.08 GAL 25 ud/box B82302004 100005817 s-107 n negro cartridge 0.08 GAL 25 ud/box B82600026 100115950 s-107 n beige cartridge 0.08 GAL 25 ud/box B82600035 100120606 s-107 n caramelo cartridge 0.08 GAL 25 ud/box B82600036 100120608 s-107 n antracita cartridge 0.08 GAL 25 ud/box B82600030 100120620 s-107 n cemento cartridge 0.08 GAL 25 ud/box B82600029 100120621 s-107 n marfil cartridge 0.08 GAL 25 ud/box B82600034 100120623 s-107 n moka cartridge 0.08 GAL 25 ud/box B82600028 100120624 s-107 n tabaco cartridge 0.08 GAL 25 ud/box

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet. Colors shown are approximate. There are physical samples available to customers for checking the real grout color.

147 Elastic joint sealants

S-502 n s-502 n is a high-performance acetic silicone putty for sealing joints. Specially recom- mended for sealing joints in bathrooms and for sealing perimeter joints in wall tile coverings. It has anti-fungal properties that prevent the appearance of black spots in damp environments.

This reticular putty, when in contact with dampness gives off acetic acid, thus beco- ming an extraordinary elastic and resistant elastomer to atmospheric agents. Indoor use.

Features: Recommended uses:

• Single-component acetic silicone. • Sealing joints in ceramics, glass, metal, plastics and • High elasticity. Can withstand movements up to 20% painted surfaces. of the sealed joint width. • Sealing joints between ceramic wall coverings and • Excellent adherence. ceramic bathroom fixtures, bathtubs, showers, or • Resistant to UV rays. countertops in kitchens and bathrooms. • Sealing perimeter joints in wall tile coverings. • Sealing glass and woodwork. • Sealing and gluing bathroom elements such as screens and cabins. • Gluing ceramic materials on wood boards.

Substrates: Materials:

• Do not use on substrates which are sensible to the • Ceramic tiles and glass mosaic. action of acids: • Glass. • Screeds and floors with cement mortar. • Plastic material. • Concrete • Do not use with materials which are sensible to the action of acids, like marble or other natural stones.

1.5 Before applying the s-502 putty on a ceramic wall cove- Coverage = ring not stated in the previous listing, please perform a (feet/cartridge) joint width (in) x joint depth (in) test or check with butech’s Technical Department.

s-502 n KEA SAP Presentation Packaging B82301002 100005809 s-502 transparente cartridge 0.08 GAL 24 ud/box B82301001 100005808 s-502 blanco cartridge 0.08 GAL 24 ud/box

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product’s technical sheet.

148 Elastic joint sealants

p-404 p-404 is polyurethane putty for sealing joints. Specially recommended for sealing movement joints outdoors. Indoor and outdoor use.

This reticular putty in contact with dampness does not give off odors, thus becoming an extraordinary adherent, elastic and resistant elastomer to atmospheric agents.

Features: Recommended uses:

• Single-component polyurethane putty. • Sealing joints even between materials sensible to • High elasticity. chemical attack. • High adherence. • Sealing movement joints in floors and walls. • Resistant to UV rays. • Bonding of building materials like ceramics, concrete, • Frost-resistant. roof tiles, wood, aluminium, polyester or PVC. • Gluing ceramic materials on metal or wood boards. • Gluing Concept XPS panels. Grouting material and elastic sealants Grouting Substrates: Materials:

• All usual substrates for ceramic tiles laying. • Ceramic tiles and glass mosaic. • Glass. • Metal. • 1.5 Plastic material, PVC. Coverage = • Concrete slabs. (feet/cartridge) joint width (in) x joint depth (in) • Wood. • Concept XPS panels.

p-404 KEA SAP Presentation Packaging B82401001 100005818 p-404 blanco cartridge 0.08 GAL 25 ud/box B82401002 100005819 p-404 gris cartridge 0.08 GAL 25 ud/box B82401003 100005820 p-404 negro cartridge 0.08 GAL 25 ud/box

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet. Colors shown are approximate. There are physical samples available to customers for checking the real grout color.

149 Leveling system for ceramic tiles self-leveling spacers Leveling system for ceramic tiles. Eases ceramic tile laying and guarantees a perfectly flat surface of the final installation. The system consists of a new type of spacer with adjustable height that levels the surrounding tiles and prevents them from moving.

Specially recommended when tile, design or use features demand a perfect finish, with an even, seamless surface.

Features: Recommended uses:

• Guarantees tiles are even. • Wall and floor tiles with minimum joint. • Prevents tiles from moving due to laying errors or due • Large format floor tiles. to mortar setting. • Laying of rectified wall tiles. • Reduces retouching and laying times. • Tiles with reduced thickness: XLIGHT • Suitable for 1/64” - 1/8” mm wide joints. • Interlocking floor designs. • Suitable for floor and wall tiles of thickness between • Glued facades. 9/32”-19/32”. For thinner tiles use the supplementary • Essential to place the ceramic by the method of thin lifting pieces layer and double gluing of the pieces • The system consists of a spacer, a wedge and an adjusting tool. • Wedges are recoverable, only the spacers are con- sumed.

Substrates: Materials:

• All usual substrates for ceramic tiles laying. • Before using the self-levelling spacers system, carry out a preliminary test with the type of wall or floor tiles to be installed and check that the tile is not damaged during the removal of the spacer, especially in textured or rectified tiles without bevelling and mosaics with 3D texture

self-leveling spacers for tiles 3 to 15 mm (1/8-19/32”) thick KEA SAP Presentation Europallet B83511063 100108031 wedge 100 ud/bag 700 bags/pallet B83511062 100108032 wedge 300 ud/bag 240 bags/pallet B83511056 100095383 wedge 500 ud/bag 140 bags/pallet B83510095 100207811 0.5 mm - 1/64’’ spacer 100 ud/bag 600 bags/pallet B83510094 100207797 0.5 mm - 1/64’’ spacer 300 ud/bag 200 bags/pallet B83510093 100207740 0.5 mm - 1/64’’ spacer 500 ud/bag 120 bags/pallet B83511059 100108026 1 mm - 1/32’’ spacer 100 ud/bag 600 bags/pallet B83511058 100108027 1 mm - 1/32’’ spacer 300 ud/bag 200 bags/pallet B83511065 100108028 1 mm - 1/32’’ spacer 500 ud/bag 120 bags/pallet B83511061 100108029 2 mm - 5/64’’ spacer 100 ud/bag 600 bags/pallet B83511060 100108030 2 mm - 5/64’’ spacer 300 ud/bag 200 bags/pallet B83511057 100095382 2 mm - 5/64’’ spacer 500 ud/bag 120 bags/pallet B83511067 100109070 3 mm - 1/8’’ spacer 100 ud/bag 600 bags/pallet B83511066 100109071 3 mm - 1/8’’ spacer 300 ud/bag 200 bags/pallet B83511070 100109072 3 mm - 1/8’’ spacer 500 ud/bag 120 bags/pallet

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.

150 Leveling system for ceramic tiles Grouting material and elastic sealants Grouting

self-leveling spacers for tiles 16 to 22 mm (5/8’’ to 55/64’’) thick KEA SAP Presentation B83511079 100225039 2 mm - 5/64’’ spacer 100 ud/bag complements KEA SAP Presentation B83510098 100213808 0.5 mm - 1/64’’ spacer system kit kit* B83511064 100108034 1 mm - 1/32’’ spacer system kit kit* B83511069 100109073 2 mm - 5/64’’ spacer system kit kit* B83511068 100109074 3 mm - 1/8’’ spacer system kit kit* B83511072 100123264 supplementary lift piece 50 ud/bag B83510071 100095386 adjustment tool unit

*kit: 1 adjustment tool, 100 spacers and 100 wedges

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.

151 Grouting material

Self-leveling spacers coverage chart

colorstuk colorstuk epotech epotech a x b c colorstuk 0-4 especial rapid aqua nature inch. inch. sq ft/bag sq ft/bag sq ft/bag sq ft/bag sq ft/bag 10”x10” 5/32” 112.12 43.4 105.11 33.22 32.75 20”x20” 5/32” 224.24 86.8 210.23 66.44 65.63 30”x30” 5/32” 336.37 130.47 314.73 99.66 98.45 39”x39” 1/4” 298.99 115.74 280.3 88.71 87.27

8”x12” 11/32” 489.26 188.84 456.09 144.15 142.88 12”x17” 11/32” 737.25 287.03 689.99 218.18 215.27 12”x23” 11/32” 815.44 316.58 768.84 244.63 240.98 12”x35” 11/32” 927.92 358.79 868.05 278.37 273.65 13”x39” 23/64” 978.53 377.68 912.19 288.31 283.26 17”x47” 13”/32” 1,121.23 430.55 1,055.28 329.5 329.5

8”x26” 7/16” 527.64 205.02 493.75 156.75 517.49 6”x35” 7/16” 401.63 155.99 376.36 118.71 117.85 9”x35” 7/16” 578.7 224.24 538.19 169.95 168.18 7”x47” 7/16” 543.63 209 507.73 159.85 158.29 7”x71” 15/32” 522.51 201.19 489.26 139.35 152.31 11”x47” 7/16” 768.84 298.99 717.59 227.4 224.24 11”x71” 15/32” 758.02 290.91 708.15 224.24 221.17 10”x59” 13/32” 727.29 283.26 689.99 218.18 215.27

17”x17” 3/8” 791.46 307.53 747.49 233.99 230.65 17”x26” 7/16” 854.27 331.19 803.27 252.27 248.39 16”x32” 7/16” 868.05 336.37 815.44 256.28 252.27 17”x35” 7/16” 978.53 377.68 912.19 288.31 288.31 23”x23” 7/16” 978.53 377.68 912.19 288.31 283.26 32”x32” 15/32” 1,195.98 458.03 1,121.23 350.99 350.99 24”x47” 15/32” 1,195.98 458.03 1,121.23 350.99 350.99 39”x39” 7/16” 1,630.08 633.17 1,537.69 489.26 474.87 47”x47” 15/32” 1,793.98 694.44 1,681.85 538.19 520.83

39”x39” 9/64” 4,892.68 4,892.68 4,892.68 4,892.68 4,892.68 39”x39” 1/4” 2,989.97 1,133.04 1,133.04 896.99 896.99 47”x47” 1/4” 3,587.96 1,345.48 1,345.48 1,076.39 1,076.39 39”x118” 9/64” 7,688.49 7,688.49 7,688.49 7,688.49 7,688.49 47”x98” 1/4” 4,892.68 4,892.68 4,484.95 4,892.68 4,892.68

152 Grouting material

Self-leveling spacers coverage chart

Spacers / sq ft a b a x b c Aligned Staggered 3/4 10” 10” 10” x 10” 5/32” 5.95 - 20” 20” 20” x 20” 1/4” 5.67 - 30” 30” 30” x 30” 1/4” 2.7 - 39” 39” 39” x 39” 5/16” 2.51 -

8” 12” 8”x12” 11/32” 5.95 - 12” 17” 12”X17” 11/32” 2.7 - 12” 23” 12”x23” 11/32” 2.05 - 12” 35” 12”x35” 11/32” 1.68 - 13” 39” 13”x39” 23/64” 1.49 - 17” 47” 17”x47” 13/32” 1.12 -

8” 26’’ 8”x26” 7/16” 3.35 4 14,3 35’’ 6”x35” 7/16” 3.63 4.37 6’’ 90 9”x35” 7/16” 2.42 2.88 7’’ 47’’ 7”x47” 7/16” 2.42 2.88 7’’ 71’’ 7”x71” 15/32” 1.96 2.14 11’’ 47’’ 11”x47” 7/16” 1.68 2.14 11’’ 71’’ 11”x71” 15/32” 1.31 1.49 10’’ 59’’ 10”x59” 13/32” 1.49 1.77

17’’ 17’’ 17”x17” 3/8” 1.96 - 17’’ 26’’ 17”x26” 7/16” 1.68 - material and elastic sealants Grouting 16’’ 32’’ 16”x32” 7/16” 1.49 - 17’’ 35’’ 17”x35” 7/16” 1.21 - 23’’ 23’’ 23”x23” 7/16” 1.12 - 32’’ 32’’ 32”x32” 15/32” 0.93 - 23’’ 47’’ 23”x47” 15/32” 0.84 - 39’’ 39’’ 39”x39” 7/16” 0.84 - 47’’ 47’’ 47”x47” 15/32” 0.56 -

39” 39” 39”x39” 9/64” 0.56 - 39” 39” 39”x39” 1/4” 0.56 - 47” 47” 47”x47” 1/4” 0.56 - 39” 118” 39”x118” 9/64” 0.38 - 47” 98” 47”x98” 1/4” 0.38 -

153 154 Substrate preparation products preparation Substrate

SUBSTRATE PREPARATION PRODUCTS primer 156 Super-prim self-leveling mortars 157 Level 3 cleaning products 158 Acid net + 158 Epotech cleaner 155 Primer super-prim super-prim is a water-based acrylic resin primer with silica arids, used for prepa- ring substrates prior to using adhesives, self-leveling mortars and mortar screeds. It reduces water absorption and improves the consistency of cement-based substrates. Professional use.

Features: Recommended uses:

• Water-based, acrylic resin latex with silica arids. • Primer for self-leveling mortars on highly absorbent or • It enhances the adherence of cement mortars on existing ceramic tile coverings. glazed wall coverings. • Ceramic tiles on cement-based substrates with weak • It improves the bonding material setting time. consistency or existing ceramic tile coverings. • It reduces substrate water absorption. • Ceramic floor coverings on anhydrite substrates or • It increases cohesion of the substrate. ceramic wall coverings on plaster or molding plaster. • Easy application with a paint roller or a wide paint- • Mortar screeds on brick partition walls or concrete block brush. Can be applied with airless spray. walls. • Indoor and outdoor use. • Mortar screeds on ceramic tile or natural stone floors. • Do not dilute with water or mix with any other liquids. • Do not use in substrates subject to dampness increases.

Substrates:

• Ceramic brick partition walls. • Cement covered floors and walls. • Concrete slabs and aerated concrete blocks. • Anhydrite-covered floors and plastered walls. • Indoor ceramic floor and wall tiles. • Indoor wood boards. • Indoor metal sheets.

super-prim KEA SAP Presentation Europallet B57500002 100123220 super-prim can 22.04 lb 1058.22 lb/pallet

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.

156 Self-leveling mortars

level 3 level 3 is a fast hardening, self-leveling mortar with fibres for leveling and regularizing substrates for all kinds of floor tiles. 3 mm-1/8'' to 30 mm-1 1/4" thickness. Specially recommended for laying ceramic floor tiles with a minimal joint indoors.

It is formulated for creating 3 mm-1/8'' to 30 mm-1 1/4" floor substrates. It features good workability, fast-setting times, and a high mechanical performance. It allows to prepare floors well levelled, for a correct and quick fixing of rectified ceramic tiles.

Certifications/Standards: EN 13813 CT C25-F5

Features: Recommended uses:

• Compressive strenght ≥ 3625 psi • Indoor large format floor tile coverings. • Flexural strenght ≥ 725 psi • Indoor large format rectified floor tile coverings. • Single-component, self-leveling mortar • Indoor floor tile coverings with a 1 mm-1/32'' joint. • Excellent adherence. Flexible • Floor tiles with radiant heating. • High fibre content • Application thickness between 3 mm-1/8'' to 30 mm- 1 1/4" • Easy application with a straight edge trowel or scraper • Indoor use • Mixing water: 4 qts per 56 lb bag Substrate preparation products preparation Substrate

Substrates: Materials:

• Cement-based substrate, previously apply uniprim. • Large format floor tiles. • Glazed ceramic tiles and wood substrates, previously • Porcelain tiles (water absorption < 0.5% as per EN-ISO apply super-prim. 10545-3). • Natural stone and marbles.

level 3 KEA SAP Presentation Europallet B15901004 100104577 level 3 bag 55.11 lb 2204.62 lb/pallet

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.

157 Cleaning products

acid net + acid net + is a concentrated descaler for cleaning ceramic floor and wall tiles. Specially recommended for cleaning building debris. Indoor and outdoor use.

Recommended uses:

• Building site final cleaning. • Cleaning of remains of adhesives and cement-based grouting materials in floor and wall tiles. • Cleaning of efflorescences and salts remains. • Cleaning of plaster remains and plaster-based remains. • Cleaning of lime remains and film. • Cleaning of glazed substrates prior to laying new tiles. acid net + KEA SAP Presentation Box B35200004 100120424 acid net + bottle 0.26 GAL 12 bottles

epotech cleaner Water-based detergent for cleaning epoxy putties remains and stains. Specially rec- ommended for cleaning remains of epotech aqua. Professional use.

Recommended uses:

• Cleaning of epoxy putties remains and films on ceramic tiles, glass mosaics and natural stones.

epotech cleaner KEA SAP Presentation Box B35200006 100120428 epotech cleaner bottle 0.13 GAL 20 bottles

*Given the wide variety of ceramic materials, glass mosaics and natural stones, we recommend to check with your tile provider about chemical resistance of the tiles before applying any cleaning product.

Before using any cleaning product, please perform a test or refer to the product's technical sheet.

158 Cleaning products

Glass mosaic Glazed ceramic tiles Porcelain Remains of building work acid net + acid net + acid net + Epoxy putty epotech cleaner epotech cleaner epotech cleaner Remains of sillicone Vitroceramic scraper + Acetone Vitroceramic scraper + Acetone Vitroceramic scraper + Acetone Moss Bleach Bleach Bleach

Merbromin Hydrogen peroxide Hydrogen peroxide Hydrogen peroxide Lodine dye Hydrogen peroxide Hydrogen peroxide Hydrogen peroxide Blood stains Hydrogen peroxide Hydrogen peroxide Hydrogen peroxide

Tar Acetone Acetone Acetone Paint, varnish, markers Acetone Acetone Acetone Adhesive and glue Acetone Acetone Acetone Rubber tires Acetone Acetone Acetone

Given the wide range of mosaics and ceramics, it is recommended to consult the supplier of tiles about the chemical resistan- ce. In any case, it is recommended to take a test.

We recommend the use on cleaning polished tiles, also with metal finish. Contact the supplier of tiles to know the chemical resistance. In any case, you have to take a test. Substrate preparation products preparation Substrate

159 160 Shower trays

SHOWER TRAYS shower deck system 162 Shower deck system concept xps shower trays 164 Concept xps shower trays 161 shower deck system shower deck system New shower tray concept with concealed drain for the most exclusive bathrooms. This innovative shower tray system lets us create a sense of continuity with the rest of the bathroom floor because the slopes are concealed under the floor. Drainage is achieved through the open joints and does not require the installation of an evacuation grid.

The shower deck system is a shower tray made up by a polyurethane base coated with thermoset polymers, especially designed to to have ceramic plates installed. Polyurethane base coated with thermoset polymers. Specially recommended for bathroom renovations.

Features: Recommended use:

• Flat shower tray without slopes. • Shower trays and cabins in designer bathrooms. • Polyurethane base coated with thermoset polymers. • Shower trays in public buildings. • Drain concealed from sight. • Applications where it is necessary to eliminate archi- • Ultra-slim shower tray; only 30 mm- 1 1/4” in height. tectural barriers. • Easy to clean and high resistance to domestic-use • Accessible bathrooms. detergents. • Virtually no maintenance, especially compared with wooden floors. • Thermal insulation. • Easy installation and assembly.

Installation: Materials:

• Concrete floor slabs. • Anti-slip porcelain tile plates. • Cement covered floors. • STON-KER antislip • Wood flooring. • PAR-KER antislip • STARWOOD antislip • URBATEK antislip

Physical properties of the shower deck systems tray: Components:

Color Black 1. Shower deck tray. Weight 1.02 psf 2. Vertical drain. Output 2 1/4” Compression resistance 290 psi 3. Drain and trap tightening wrench. Capillarity 0 Limit application temperature. -94ºF/266ºF 4. PVC leveling profiles (2 pcs) Supply thicknesses (mm) 1 1/4” 5. Perimeter profiles for intersection of wall and floor (2 pcs) Tolerances Length and width: ±2 mm-5/64’’ 6. Profiles for union of ceramic pieces of 35 x 14 x longest Thickness: +/- 2 mm-5/64’’ measurement of the tray, max. 2000 mm (2 pcs). Squaring: <2 mm/m-< 0.024” per ft 7. P-404 tube. 8. Protection plate. 9. Manhole key. 10. Instructions.

shower deck system KEA SAP Presentation B88000632 100209349 Custom size Shower Deck 1 box B82902188 100228741 USA shower deck drain 1 box

162 Shower trays

163 concept xps shower trays concept xps shower trays

It is a prefabricated system for creating built in shower trays. They include the slopes for the correct water drainage and are ready to use, reducing the working times and producing a perfect substrate for laying mosaic, natural stone or ceramics.

Concept XPS shower tray is light, resistant and safe, specially recommended in bathroom refurbishing jobs.

Features: Recommended uses:

• Prefabricated shower tray made of extruded polysty- • Specially designed for waterproofing built in showers. rene covered with cement mortar. • It includes slopes for water drainage. • Double waterproofing: covering consisting of water- Materials: proof mortar and imperband sheet (not included). • Available for square as well as for linear drains. • Absorbent and non-absorbent ceramic tiles. Porcelain tiles with a water absorption < 0.5% as per EN-ISO 10545-3. • Compression resistance (10% DIN 3421 0.3 N / mm2 • Glass mosaic. crush risk): • Natural stone and marble not prone to staining. • Initial thermal conductivity: DIN 2612 0.0336 W/mºK • Flammability: DIN 4102 B1

Substrates:

• Concrete floor slabs. • Cement covered floors. • Timber floorboards

These shower trays feature a 40 mm thickness. It includes the imperband standard kit. Does not include linear gratings. concept xps shower trays E Q KEA SAP Presentation B88000621 100183347 36” x 36” E Q shower tray

concept xps shower trays LLR KEA SAP Presentation B88000622 100183333 48” x 32” LLR shower tray

164 Shower trays

165 166 Waterproofing

WATERPROOFING waterproofing 168 Imperband deck kit 170 Linear grates 171 Squared grates 172 Imperband USA Kit 173 Imperband 174 Sylastic Decoupling and waterproofing 175 Lamitech n Decoupling 176 Butech anti-cracking mat 167 Waterproofing

imperband deck kit New waterproofing system for ceramic parquet-covered shower trays; specially designed for PORCELANOSA Grupo’s PAR-KER and STARWOOD lines. In this system, the traditional metal grid is replaced with a ceramic piece so that the drain system is hidden from sight. Professional use.

PAR-KER and STARWOOD is compatible with shower trays that have one, two, or four slopes, draining only through an open joint in the shower tray covering. A new invisible drain concept, for the best bathroom designs.

Characteristics: Recommended use:

• Drainage system for ceramic-covered and ceramic Ceramic showers with ceramic parquet covering. trim shower trays. Especially recommended for the following models: • Drainage through the open perimeter joint around the ceramic cover. Drainage joint width: 4 mm - 3/16’’. • STARWOOD 250 x 1500 mm (9.8’’ x 59’’) • Ultra-slim shower tray; only 22 mm - 55/64’’ in height, • PAR-KER 219 x 660 mm (8.6’’ x 26’’) plus 60 mm - 2.3’’ from the drain. • PAR-KER 210 x 659 mm (8.2’’ x 26’’) • Compatible with all butech shower waterproofing • PAR-KER 143 x 900 mm (5.6’’ x 35.3’’) systems: imperband, sylastic, and imperbox • PAR-KER 220 x 900 mm (8.6’’ x 35.3’’) • Suitable for all PAR-KER and STARWOOD models of • PAR-KER 193 x 1200 mm (7.5’’ x 47.2’’) less than 150 cm - 59’’ in length • PAR-KER 294 x 1200 mm (11.5’’ x 47.2’’) • High resistance to domestic-use detergents. • Safe and easy to maintain system. • Quick and easy installation. Installation:

Materials: • Connect the deck drain to the drain pipe. • Connect the deck drain to the linear deck base. • Anti-slip porcelain tile plates. • Prepare the shower tray base with cement mortar • STON-KER antislip and level with the linear deck base, and let dry. As a • PAR-KER antislip general rule, we recommend a 2% slope • STARWOOD antislip • Once the shower tray base is dry, waterproof the joint • URBATEK antislip between the linear deck base and the shower tray by using the imperband perimeter band. Bond with a C2 Substrates: S1 thinset as per EN 12004, such as one-flex. • Waterproof both the shower tray and the shower • Cement covered floors walls with the chosen system. Although butech offers several systems that are compatible with the imper- Components: band deck kit, we recommend the imperband water- proof sheet; follow the instructions for use strictly. 1. Tray with the corresponding measure with 15 cm - 6’’ • Install the shower tray floor using the thin layer, thermo-sealed imperband flange. double bonding technique. Use an thinset that is at least a C2 S1 as per EN 12004, suitable for the chosen 2. Large flow removable drain and trap. ceramic type. 3. Trap tightening wrench. • Install the ceramic trim. 4. Manhole key. • Fill the tile joints of the shower tray covering with 5. 5 meter imperband roll a moisture-resistant material; as a general rule, we 6. Instructions. recommend RG materials as per EN 13888, such as epotech nature. * Ceramic trim not included • Seal the shower tray perimeter joints and wall inter- sections using an elastic sealant such as s-107 n deck imperband kit KEA SAP Presentation B82902180 100215018 210 x 659 mm (8.2’’ x 26’’) 1ud/box B82902179 100215040 219 x 660 mm (8.6’’ x 26’’) 1ud/box B82902177 100214989 143 x 900 mm (5.6’’ x 35.3’’) 1ud/box B82902181 100215031 220 x 900 mm (8.6’’ x 35.3’’) 1ud/box B82902178 100214995 193 x 1200 mm (7.5’’ x 47.2’’) 1ud/box B82902183 100215006 294 x 1200 mm (11.5’’ x 47.2’’) 1ud/box B82902182 100215023 250 x 1500 mm (9.8’’ x 59’’) 1ud/box B82902189 100231470 Custom size 1ud/box

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.

168 Waterproofing

169 Waterproofing linear grates * imperband USA kit required glass white KEA SAP Presentation B82902078 100141155 3 5/32’’ x 47 1/4’’ 1ud/box B82902081 100141157 3 5/32’’ x 31 1/2’’ 1ud/box B82902079 100141156 3 5/32’’ x 23 15/32’’ 1ud/box

glass black KEA SAP Presentation B82902077 100141152 3 5/32’’ x 47 1/4’’ 1ud/box B82902080 100141154 3 5/32’’ x 31 1/2’’ 1ud/box B82902076 100141153 3 5/32’’ x 23 15/32’’ 1ud/box

ceramic framed KEA SAP Presentation B82902098 100148594 3 21/32 x 47 1/4’’ 1ud/box B82902120 100148595 3 21/32 x 31 1/2’’ 1ud/box B82902116 100148593 3 21/32 x 23 15/32’’ 1ud/box

Porcelain tiles are not included

ceramic non framed KEA SAP Presentation B90200675 100119619 3 21/32 x 47 1/4’’ 1ud/box B82902153 100119621 3 21/32 x 31 1/2’’ 1ud/box B82902090 100119620 3 21/32 x 23 15/32’’ 1ud/box

Porcelain tiles are not included

Includes drainage channel and grate.

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.

170 Waterproofing

chrome texture KEA SAP Presentation B82902044 100103364 3 21/32 x 23 15/32’’ 1ud/box B82902042 100103366 3 21/32 x 31 1/2’’ 1ud/box B82902045 100103365 93 x 596 mm 1ud/box

texture KEA SAP Presentation B82902047 100103367 3 21/32 x 23 15/32’’ 1ud/box B82902048 100103369 3 21/32 x 31 1/2’’ 1ud/box B82902036 100103368 3 21/32 x 47 1/4’’ 1ud/box

squared KEA SAP Presentation B82902035 100103370 3 21/32 x 23 15/32’’ 1ud/box B82902039 100103372 3 21/32 x 31 1/2’’ 1ud/box B82902041 100103371 3 21/32 x 47 1/4’’ 1ud/box Waterproofing line KEA SAP Presentation B82902043 100103373 3 21/32 x 23 15/32’’ 1ud/box B82902040 100103375 3 21/32 x 31 1/2’’ 1ud/box B82902046 100103374 3 21/32 x 47 1/4’’ 1ud/box

square grates KEA SAP Presentation B82902094 100148572 squared USA 1ud/box

squared USA

Includes drainage channel and grate.

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.

171 Waterproofing

imperband USA kit The imperband USA kit is an indoor waterproofing system consisting of a PVC gutter thermowelded to a 40”x 40’’ (100 x 100 cm) waterproof sheet. Specially recommended for waterproofing shower trays in new building works. Residential use.

The waterproof sheet is an imperband type 1/64” (0.5 mm) thick polymer membrane with a double thermoplastic polyolefin sheet and covered on both sides by non woven polyester fibre that allow it to be bonded to surfaces using cement-based adhesives. The gutter features a compact design and multiple possibilities of outlet connections.

Features: Recommended use:

• Maximum security, it eliminates leakage risks • Specially designed for waterproofing built in showers. between waterproof sheet and drain piece. • 40”x 40’’ (100x100 cm) waterproof sheet. • Discharge speed. 0.5 l/s. • Compact system, just 100 mm · 4” high. • Includes u-bend. • Direct installation of the tile on the waterproof sheet. • Quick and easy application.

Materials: Installation:

• Absorbent and non-absorbent ceramic tiles. Porcelain • Build the slopes with concrete or use prefabricated tiles with a water absorption < 0.5% as per EN-ISO concept XPS shower trays 10545-3. • Before laying the ceramics of the shower tray, check • Glass mosaic. that the gutter works correctly. • Natural stone. • Use the waterproof sheet in the same way as the imperband sheet.

Substrates:

• Wooden floors • Cement covered floors. • Concept XPS shower trays, prefabricated polystyrene panels.

imperband USA kit KEA SAP Presentation B82902053 100110215 3ft 3 3/8”x 3ft 3 3/8” (100 x 100 cm) 1 kit/carton B85900020 100128396 waterproof Kit *Kit *The mounting kit includes: 1 p-404 tube + imperband n 5 m roll + 2 corners + 10 ml of waterproof band Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.

172 Waterproofing imperband imperband is a waterproof sheet, specially designed for indoor waterproofing of ceramic wall and floor coverings.

It is a 0.5mm - 1/64’’ thick polymer membrane with a double thermoplastic polyolefin sheet and covered on both sides by non woven polyester fibers that allow it to be bonded to surfaces using cement-based adhesives. Ideal for use in new construction and refurbishment of showers and baths, and any indoor environment permanently affected by damp.

Certifications/Standards: Avis technique: CSTB 13/08-1035

Features:

• Maximum security, it eliminates leakage risks between waterproof sheet and drain piece. • Available in rolls of 54 sqft and 320 sqft • Discharge speed. 0.5 l/s - 0.13 gal/s. • Very compact system, just 75 mm - 2 61/64’’ high. • 50 mm diameter horizontal outlet. • Includes u-bend. • Direct installation of the tile on the waterproof sheet. • Quick and easy application. Waterproofing

Installation: Materials:

• imperband sheet is compatible with type C2 cement- • Absorbent and non-absorbent ceramic tiles. Porcelain based adhesive as per EN 12004. tiles with a water absorption < 0.5% as per EN-ISO • In case of surfaces bigger than the length of the 10545-3. sheet, overlap two 10 cm-4” sheets and bond with C2 • Glass mosaic. adhesive. • Natural stone and marble not prone to staining. • In waterproofing of floors, leave an excess of sheet of at least 10 cm-4” in all the spots where floor meets the wall. Substrates: • Be extremely cautious when connecting the sheet to the drainage systems. • Cement covered floors and walls . • Once the imperband sheet has been installed, cover • Concrete slabs. with the chosen floor covering. Never leave exposed • Plasterboards. to direct sunlight. • On anhydrite or plaster substrates apply uniprim.

imperband KEA SAP Presentation B84901001 100006213 imperband roll 54 sqft B84901006 100006218 imperband roll 320 sqft

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.

173 Waterproofing sylastic sylastic is a two-component cement-based waterproofer with excellent bonding and deformability features, specially recommended for waterproofing outdoors. Compatible with type C2 cement-based adhesive as per EN 12004. Indoor and out- door use.

Prevents the need of screed between waterproofing sheet and ceramic floor, thus reducing the final system thickness. It is applied in two 1-2 mm layers each, with a fiberglass mesh reinforcement on the first application. Special pieces and bands avail- able for waterproofing joints and other critical spots.

Features: Recommended use:

• Two-component waterproofing mortar. • Waterproofing of bathrooms and showers. • Indoor and outdoor waterproofer. • Spas and premises in permanently damp environ- • Maximum waterproofing with minimal thickness 3 ments. mm (1/8”). • Outdoor terraces and balconies. • It allows for direct laying of ceramic tiles with cement- • Pools and premises into direct contact with water. based adhesive. • Cisterns and reservoirs into direct contact with water. • Excellent adherence and maximum deformability. • Repair of cracked floors and renderings. • Good chemical resistance. • Promotes adherence on existing ceramic wall tiles • Suitable for direct contact with water. and on wood or metal substrates.

Substrates: Materials:

• Cement covered floors and walls . • Absorbent and non-absorbent ceramic tiles. Porcelain • Concrete slabs. tiles with a water absorption < 0.5% as per EN-ISO • Plasterboards. 10545-3. • Wood boards. • Glass mosaic. • Existing floor tiles. • Natural stone and marble not prone to staining. • Metal sheets.

sylastic KEA SAP Presentation B85900004 100072729 sylastic mortar 24 Kg - 53 lb bag 960 Kg/pallet - 2115 lb/pallet B85900005 100072730 sylastic additive 8 Kg - 18 lb can 320 Kg/pallet - 705 lb/pallet

B85900050 100166202 10 m fiberglass mesh 10 m2 - 108 sqft B84900303 100006212 50 m fiberglass mesh 50 m2 - 538 sqft B84900101 100006210 outer angle unit B84900202 100006211 inner angle unit

B85900008 100081532 5 ml waterproof band Roll 5 m - 16 ft B85900009 100081531 10 ml waterproof band Roll 10 m - 32 ft B84905004 100006221 50 ml waterproof band Roll 50 m - 160 ft

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.

174 Decoupling and waterproofing

lamitech n lamitech n is a multilayer polymer sheet, specially designed for outdoor floors decou- pling. Protects tiles against substrate tensions, reducing the risk of breakage and piece lifting. Suitable for outdoor waterproofing.

Coextruded HDPE/EVAC membrane, with one side covered with polyester fibers and the other one with polyester entwined felt, that allows laying with cement-based adhesives. Absorbs tensions, reducing their transmission to the ceramic floor. Indoor and outdoor use.

Features: Recommended use:

• Multilayer HDPE/EVAC polymer membrane covered • Decoupling of balconies and terraces. with polyester fibers. • Waterproofing of outdoor floors. • Maximum outdoors waterproofing with minimal • Laying of ceramics on wood substrates. thickness (3.4 mm - 9/64’’). • Laying of floor tiles on cracked substrates. Terrace • It allows for direct laying of ceramic tiles with cement- refurbishing. based adhesive. • Laying of ceramics on substrates which are not set yet • Good chemical resistance. or present residual damp. • Improves impact noise reduction. • Quick and easy application. Waterproofing

Installation: Materials:

• lamitech n sheet is compatible with type C2 cement- • Absorbent and non-absorbent ceramic tiles. Porcelain based adhesive as per EN 12004. tiles with a water absorption < 0.5% as per EN-ISO • Place sheets side by side, without overlappings. In 10545-3. case of using it as waterproofer,proceed to sealing • Glass mosaic. sheet joints with sylastic waterproof mortar and lami- • Natural stone and marble not prone to staining. band 200 waterproof band.. • In waterproofing of floors, lengthen the waterproof- ing with lami-band 200 at least 10 cm-4’’ in all the spots where floor meets the wall. Substrates: • In movement joints, use flexible tape waterproof band. • Cement or anhydrite covered floors. • Be extremely cautious when connecting the sheet to • Concrete slabs. the drainage systems. • Existing floor tiles. • Once lamitech n has been installed, lay the chosen • Plywood boards. floor with compatible adhesives. Never leave exposed to direct sunlight.

lamitech n KEA SAP Presentation B89500011 100089879 lamitech n 5 m - 16 ft 200 m2/pallet = 2150 sqft/pallet B84901005 100006217 lami-band 200 mm 30 m - 96 ft B84905004 100006221 50 ml waterproof band Roll 50 m - 160 ft B85900004 100072729 sylastic mortar 24 Kg - 53 lb bag 960 Kg/pallet - 2115 lb/pallet B85900005 100072730 sylastic additive 8 Kg - 18 lb can 320 Kg/pallet - 705 lb/pallet

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.

175 Decoupling

butech anti-cracking mat Decoupling sheet for floors undergoing low and medium movements. It reduces the transfer of tensions and stresses between the substrate and the flooring, protects the flooring against the appearance of cracks in the substrate or sideways movements between the slabs forming the substrate and allows ceramic or natural stone flooring to be laid on substrates and structures with medium and low movements such as wooden panels.

Features: Final use:

• Closed-cell elastomer sheet coated on both sides with • Indoor and outdoor floor tile coverings non-woven fibers that allow cement-based adhesives • Residential and public concurrence floor coverings to be anchored. with pedestrian traffic • It allows for direct laying of ceramic tiles with cement- • Floor coverings for commercial or industrial use with based adhesive types C2 S1 according to EN 12004. mechanical requirements, even with wheel circulation • Floors with built-in heating Color: White • Suitable for kitchens, bathrooms and water-bearing Roll dimensions: 161 sqft / 49ft x 3.3ft areas Roll weight: 27 lb/roll • Suitable for floor renovations Sheet thickness: 1/16” Sheet density: 0.10 lb/sqft We do not recommend the use of butech anti-cracking mat in: - Indoor and outdoor walls - Supports exposed to bending movements - On structural joints or movement joints of the support

Materials:

• Stoneware and porcelain stoneware floors, even large formats. • Natural stones and marbles, even large formats.

The use of butech anti-cracking mat is not recommended: - Chemically resistant floor coverings - Under parquet floors

butech anti-cracking mat KEA SAP Presentación B85900058 100227223 Roll 15 m2 - 161 sqft 12 roll / pallet

Before using this product in any application not indicated in this catalog, please perform a test or refer to the product’s technical sheet.

176 Waterproofing

177 178 Raised floors Raised

RAISED FLOORS raised access flooring 18 0 Raised access flooring raised access flooring for exteriors 19 0 Raised access flooring for exteriors

179 Raised Access Flooring

Raised Access Flooring offices

The raised access flooring (RAF) is a system that was born from the need to hide the large number of installations such as telephone and electricity wiring, piping, air conditioning, etc... that are located in work areas, technical rooms, etc...

These installations are hidden under the system, as a “technical plenum” has been created with immediate and easy accessibility. It also lets us carry all the installations neatly. System application areas

Facilities with a high volume of services or in rooms that house technical equipment that requires special ventilation. Commercial applications: offices, libraries, museums, schools, shopping centres, etc. Technical applications: telecommunications/electricity plants, control rooms, laboratories, data centres, etc.

Advantages

Ability to hide away all types of ugly and dangerous cables, pipes etc under the floor. Improved installation efficiency in comparison to conventional floors (installation rate of about 40 m2/day). Easy to take with you when relocating offices. Option of rerouting services following installation of floor.

Advantages over other raised access floor systems

Able to withstand a high mechanical load. The potential for combining different structures, as required in each particular case. It has an excellent reaction to fire under laboratory testing. It has very low dimensional tolerances, which allow for a perfect exchange of panels. Cores made of high-performance materials with very high densities. Compliance with UNE EN ISO 9001, guaranteeing quality controls during each stage of the manufacturing process. On the top surface, any 60 x 60 ceramic tile by Porcelanosa or other non-ceramic coverings (plastic laminate, linoleum, vinyl, granite, aluminium, steel, carpet, parquet etc) can be used. The pieces are protected by a plastic material edging, in order to prevent the tiles from spalling. A wide range of complementary products to ensure a good finish.

180 Raised floors Raised

181 Raised Access Flooring Panels

Panels with chipboard core.

They are made of chipboard with a high-performance resin binder. Available in a thickness of 38 mm - 1 1/2”, they feature an aluminum, gal- vanized steel or plastic lower covering, thus offering slightly different properties to suit each individual case. The panels have a plastic surround to prevent the edges from breaking.

1 2 4 2 3

1. Covering piece 2. Edging. 3. Lower covering. 4. Wood core.

Panels with calcium sulfate core.

It consists of a mineral soul of a single layer based on calcium sulfate of high density. It can be found in thicknesses of 29 mm - 1 1/8” and 34 mm - 1 1/3” and with lower coating of aluminum or galvanized steel. As in the wood panels, the perimeter of all the panels has a plastic su- rround to prevent the edges from breaking.

1 2 4 2 3

1. Covering piece 2. Edging. 3. Lower covering. 4. Calcium sulfate core.

Panel with ceramic core.

Formed by a core of high-density inert and inorganic material (2,200 kg/m³-137 lb/ft3). Available in thickness of 15 mm-9/16”, and with bottom skin of aluminium or galvanised steel sheet. As in the wood and sulphate panels, the perimeter of all panels is trimmed with plastic in order to prevent parts from peeling. Ideal material for wet areas and/or humid areas as it is non-absorbent (water absorption of 0.05%).

1 2 4 2 3 1. Covering piece 2. Edging. 3. Lower covering. 4. Ceramic core.

182 Raised floors Raised

Technological building of UJI University (Castellón, Spain)

183 Raised Access Flooring

Structure

The structure is made up of pedestals and stringers, which support the floor covering and ensure the necessary height and rigidness.

Pedestals Stringers

100% galvanised steel structure. This pedestals dictate the floor hei- Like the pedestals, the stringers are made entirely of galvanised ste- ght according to the project requirements. Each pedestal incorpora- el. Their main function is to increase the strength of the floor. They tes a series of plastic noise-reduction heads fitted with four positio- are covered with special noise-reduction strips. ning lugs.

One of the main advantages of the pedestal system is that it is fitted with a 14 mm-9/16” threaded bolt that can be adjusted to accommo- date different floor height requirements.

From the point of view of performance, it presents a high resistance to bending vertical load and / or eccentric, thanks to a screwed bolt M16 section, a tube of diameter 20 mm-25/32” of thickness of 2 mm-5/64”, internally calibrated to obtain a coupling with smaller tolerances and therefore less spaces and a direct connection between the screwed bolt of the disc base and tube, without need of interposing deformable plastic elements.

Depending on the configuration of both the panel and the structure, we can achieve a resistance to static loads up to 4,400 kg/m2-6.25 lb/in2

184 Raised floors Raised

185 Raised Access Flooring

Azaleas residential gym (Zaragoza, Spain)

Airfren Headquarters (Zaragoza, Spain) 186 Raised Access Flooring Raised floors Raised

187 188 Raised Access Flooring Raised floors Raised

Corsham DCSA (United Kingdom) 189 Raised access flooring for exteriors

Raised access flooring for exteriors The raised access floor (RAF) system for terraces has been specially created to solve the aesthetic problem that exists with the slopes in terraces and to hide elements under the floor. By building a completely flat floor over the existing terrace floor, these slopes are conveniently hidden underneath. Height deviations are offset with height-adjustable plots and any accumulated water is drained through open joints on the newly paved surface and then channelled down the terrace’s waterproofed slopes to the drain. Advantages

• The system can be used to create a flat paved surface over sloping masonry floors with height deviations of up to 3%. Any height devia- tions over 2% will need to be corrected with mortar or with wedges. • The creation of an air void under the newly paved surface generates a continuous flow of air through the pavement joints, which prevents the build-up of condensation and also produces an insulation layer. • The under floor void, can also be used to house cables, pipes, etc. • Easy to access this space under the floor (do not use P-404 to bond tiles and plots in areas where you need to access the services under- neath and be able to have space to work on it). • The plenum created by the floor elevation reduces the level of noise on the lower floor. • The system is quick to install as the tiles and supports are installed at the same time. • Advantages of PORCELANOSA Grupo pavement: Easy to clean, low dimensional tolerances, wide variety of finishes, hardness, etc.

Son Moll Hotel (Mallorca - Spain)

190 Raised access flooring for exteriors

The external RAF is a type of over-raised pavement with special ceramic tiles that are arranged on plastic PVC plots of adjustable height, so that a hollow space is determined between the support and the floor tiles.

The elements that make up this system are as follow: Outdoor tiles to RAF for exterior

PORCELANOSA Grupo ceramic pieces.

The external RAF ceramic tiles consist of two porcelain stoneware slabs or technical porcelain stoneware by PORCELANOSA Grupo stuck with hot melt reactive to moisture. They are made with a sufficient thickness to withstand the breaking load demanded on these over-raised pavements.

These porcelain stoneware slabs or technical porcelain stoneware by PORCELANOSA Grupo are manufactured with needed thickness to wi- thstand the breaking load indicated above, which does not mean that on heavy shock or falls of heavy objects cannot produce the breaking of the same. Structure of RAF for exterior

Plots with adjustable height.

These plots, made of weatherproof plastic, are the support on which the ceramic tile of external RAF rests. They determine the height of the system and width of the joint between slabs. This element consists of the following parts:

• Plot base: Large diameter base that distributes the weight on the support system. • Stem: Adjustable height rod that allows adapting height of the plot to the needs of the pavement over-raised. • Head: Where OUTER RAF tiles are laid. With 4 spacers that determine grout joints, with a width of 4 mm. • Function is to lock head and base to prevent them from loosening over time. Raised floors Raised Optional

• External RAF levelling key: used to adjust the height of the system once the tiles have been placed.

The total height of the plot can be adjusted for different adjustable heights.

191 Raised access flooring for exteriors

CHARACTERISTICS

• Manufactured by injection molding. • Dimensional stability. • Fire performance in accordance with UNI EN 13501-1:2009: Class E. • Resistance to low temperatures (-40ºF). • Resistant to aqueous solutions of inorganic salts, acids and alkalis. • Resistant to most organic solvents, such as alcohol, esters and ke- tones. • Resistant to solutions of commercial detergents and bleaches. • Resistant to microorganisms because it is not cultivation ground for these. • It does not punch the waterproofing sheets or thermal insulations. • It is not resistant to oxidizing substances as nitric or sulfuric acid and hydro-carbon halogenated solvents as gasoline. • Surface finishes which allow the installation of plots as long as the substrate is totally flat: - Layers of compression of mortar. - Chlorine Rubber primers. - Butyl fabrics. - Auto-protected asphalt fabrics. - Sheets of PVC, EPDM and TPO.

• It is prohibited its use: - Entirely in facilities of animals such as pig farms, etc. - In facilities where there is road traffic (cars, trucks, etc). - On gravel, cellular concrete, directly on the ground and on non-protected asphalt sheets, in short, non-rigid substrates).

• In case of using this system in hospitality, sanitary, educational, commercial, administrative or public facilities, please contact the Butech Technical De-partment and ask for an installation report.

CLIP T (WINDPROOF)

The T clips are designed to provide a high wind uplift resistance for outdoor raised floor tiles.

This interlocking system creates a single tile surface in which an individual tile is no longer the weakest link.

Wind uplift resistance up to 132 mph

192 Raised access flooring for exteriors Raised floors Raised

Private house (Canet de Berenguer - Spain) Arch: Octogono Castellón

193 Raised access flooring for exteriors

Private house (Silverwood - UK)

194 Raised access flooring for exteriors Raised floors Raised

195 Raised access flooring for exteriors

Hotel-Spa Monasterio de Valbuena (San Bernardo - Spain)

196 Raised access flooring for exteriors Raised floors Raised

Arch: Lorenzo Marqués de la Riva (BDM) and MªJesús de Pablo

197 198 Tools

TOOLS

200 XLIGHT Tools 207 Ceramic tile cutting, drilling, and mitering 219 Mixing of mortars and joint materials 222 Tools and accessories for installing ceramics

199 XLIGHT Tools Transport of XLIGHT XLIGHT extending frame

Frame with 2 extending transporters for slabs up to 133-7/8” in length. Specially recommended for large-format slabs such as URBATEK’s XLIGHT laminated por- - Length: 70-7/8” - 133-7/8” celain tile - 6 single suction cups plus 2 vacuum suction cups This frame’s main features are the following: - 6 handles plus four side guards against • Slab length: 70-7/8” - 133-7/8” blows. • Slab width: 15-3/4” - 39-3/8” • Maximum weight: 220 lb

SAP KEA Description 100145192 B83510084 (1 unit)

XLIGHT Premium extending frame

Frame with 2 extending transporters for slabs up to 133-7/8” in length. Specially recommended for large-format slabs such as URBATEK’s XLIGHT Premium lami- nated porcelain tile - Length: 70-7/8” - 133-7/8” - 6 vacuum suction cups This frame’s main features are the following: - 6 handles plus four side guards against • Slab length: 70-7/8” - 133-7/8” blows. • Slab width: 15-3/4” - 63” • Maximum weight: 330 lb

SAP KEA Description 100201778 B83510089 (1 unit)

200 XLIGHT Tools Transport of XLIGHT XLIGHT cutting guide

Dry-cutting system for large-format slabs using roller disc cut and split- ting with pliers. Compatible with RM3 electric cutter for cutting guides. - Cutting length: 129-7/8’’ - Cutting length extendable up to It includes: 171-1/4’’ with the use of extenders • Two 63’’ cutting guides - Fastening to slab to cut using suction • Sliding group for incision-marking pieces with a 5/8’’ diameter roller disc cut cups • Splitter pliers for slabs up to 1/4’’

SAP KEA Description 100242391 B83501142 (2 unites) Tools Extender for XLIGHT cutting guide 129-7/8’’

Extender for XLIGHT cutting guide 129-7/8’’

- It extends the cutting length of the Compatible with RM3 electric cutters for cutting guides. XLIGHT guide by 40-9/16’’ - Cutting length extendable up to 171-1/4’’ with the use of extenders - Fastening to slab to cut using suction cups

SAP KEA Description 100242358 B83510111 (1 unit)

201 XLIGHT Tools XLIGHT cutting RM3 electric cutter for cutting guide

Electric dry cutter for straight cutting. Compatible with the RM3 XLIGHT cutting guide 129-7/8’’ RM3 electric cutter for cutting guide

Characteristics: - Compatible with the RM3 XLIGHT straight cut- ting guide 129-7/8’’ • Cutting depth for 90º: 25/32’’ - Perpendicular dry cut : 45º (mitred) / 90º (cut) / • Cutting depth for 45º and 180º : 5/8’’ 180º (groove for façade) • Pre-installation for wet cutting and dust suction - 4-7/8’’ diameter cutting disc

Pulvérisateur eau pour meuleuse RM3

- Elimine l´émission de poussière - Améliore la qualité de la coupe - Accélère le processus de coupe

SAP KEA Description 100242385 B83501142 (1 unit)

202 Tools

203 XLIGHT Tools XLIGHT cutting Roller disc for XLIGHT cutting guide

Roller disc for XLIGHT cutting guide, suitable for all types of ceramic tiles. Maxi- mum precision and minimum vibration; no chipped tiles.

It includes fastening bolt.

- Compatible with the XLIGHT cutting guide - Porcelain tile

SAP KEA Description 100153330 B83502022 5/8”

XLIGHT cutter

Diamond blade for marking slabs with incision during their cut

- Porcelain tiles and glass

SAP KEA 100120764 B83510077

Splitter pliers for XLIGHT Premium

Pliers for separating slabs previously marked with the XLIGHT cutting guide. Spe- cially recommended for large-format slabs such as URBATEK’s XLIGHT Premium laminated porcelain tile

- Suitable for thicknesses of 1/4” to 25/32” - Applying pressure with adjusting screw SAP KEA - Manufactured in galvanized steel, high strength. 100120771 B83510076

204 XLIGHT Tools XLIGHT Accessories XLIGHT abrasive sponge

Abrasive sponge for ceramics. Suitable both for rectifying cuts and minor devia- tions and for softening edges.

- 200 grain

SAP KEA Description 100120766 B83508026 2-1/8” x 3-1/2”

XLIGHT notched trowel

Angle-notched trowel for installation of large-format slabs such as URBATEK’s XLIGHT laminated porcelain tile

Advantages: • Overlapping of adhesive seams creating greater contact between tile and bonding marterial • Reducing gaps under tiles

• The partially-rounded edges of the notches facilitate the application of the adhesive Tools

- 11’’x 5-1/8’’ angle-notched trowel - 1/32” Stainless steel sheet - Ergonomic open handle with alumi- SAP KEA Description num core. 100120768 B83507107 11” 1/4” x 1/4” 100253711 B83507130 11” 3/8” x 3/8”

XLIGHT double suction cup

Tool for handling tiles, specially recommended for large-format slabs and tiles

Manufactured in aluminum, it has an ergonomic open handle that facilitates the hand- ling of the slabs and ceramic tiles. Do not use with formats smaller than 350 mm.

- Up to 198 lb - All kinds of tile formats and thicknes- ses. - Manufactured in non-staining gray ru- SAP KEA Description bber 100120773 B83510080 Ø 11’ 5-25/32” Double

205 XLIGHT Tools XLIGHT Accessories XLIGHT joint adjustment device

Device for adjusting the position of adjacent slabs. It allows for the modification of the tiling joint between the slabs without hitting them, which could damage the slabs

Specially recommended for installation with a minimal joint.

- Adjustment by turning the center screw - 2 swiveling groups with 3 Ø4-3/4” suc- tion cups - Manufactured in non-staining gray ru- SAP KEA bber 100120765 B83510075

XLIGHT vibrator

Vibrator for settlement of large-format slabs. Specially recommended for lar- ge-format slabs such as URBATEK’s XLIGHT Premium laminated porcelain tile

Characteristics: • 2-speed vibration: 6,000 / 8,200 rpm • Weight: 25 lb • It includes 230/42V transformer

- Floor and wall tile - 9-7/8” x 17-3/4” non-staining grey rub- ber base - Ergonomic handle SAP KEA Description 100120774 B83513044 90 W 230V/42V 50-60Hz

XLIGHT rubber trowel

Rubber trowel for applying pressure on newly-installed ceramic tiles and impro- ving contact with the bonding material. Specially recommended for large for- mats and URBATEK’s XLIGHT slabs

- Solid rubber sheet - Off-center handle for easier handling. SAP KEA Description 100120769 B83507108 13-25/32” Solid rubber

206 Ceramic tile cutting, drilling, and mitering Hand machines and cutting roller discs for ceramics TX 700 hand cutting machine

Hand cutter for perfect cutting of ceramic tiles, especially for cutting tiles, glazed or extruded tiles, and porcelain tiles.

This cutter’s main features are the following: • Mobile separator with 2,204 lb. power, for cutting harder materials. • Two-material handle with a cared-for ergonomic design, • Aluminum cutting base made up of two sheets with buffering effect. • Side stopper to make repetitive cuts and swivel angle for angle cuts • Guide system of double reinforced cut with stainless steel profiles. • Roller discs of Ø5/16” to 7/8” adaptable to each material to obtain maximum perfor- mance and cutting quality. It includes carrying case and two Ø5/16” to 23/32” roller discs - Cutting length: 27-15/16” - Diagonal cutting length: 19-11/16” x 19-11/16” - Cutting thickness: 1/4” - 25/32” SAP KEA Description 100005834 B83501004 700 N

TX 900 hand cutting machine

Hand cutter for perfect cutting of ceramic tiles, especially for cutting tiles, glazed or extruded tiles, and porcelain tiles.

This cutter’s main features are the following: • Mobile separator with 2,204 lb. power, for cutting harder materials. • Two-material handle with a cared-for ergonomic design, • Aluminum cutting base made up of two sheets with buffering effect.

• Side stopper to make repetitive cuts and swivel angle for angle cuts Tools • Guide system of double reinforced cut with stainless steel profiles. • Roller discs of Ø5/16” to 7/8” adaptable to each material to obtain maximum perfor- mance and cutting quality. It includes carrying case and two Ø5/16” to 23/32” roller discs - Cutting length: 36-5/8” - Diagonal cutting length: 25-5/8” x 25-5/8” - Cutting thickness: 1/4” - 25/32” SAP KEA Description 100005835 B83501005 900 N

TX 1200 hand cutting machine

Hand cutter for perfect cutting of ceramic tiles, especially for cutting tiles, glazed or extruded tiles, and porcelain tiles.

This cutter’s main features are the following: • Mobile separator with 2,204 lb. power, for cutting harder materials. • Two-material handle with a cared-for ergonomic design, • Aluminum cutting base made up of two sheets with buffering effect. • Side stopper to make repetitive cuts and swivel angle for angle cuts • Guide system of double reinforced cut with stainless steel profiles. • Roller discs of Ø5/16” to 7/8” adaptable to each material to obtain maximum perfor- mance and cutting quality. It includes carrying case and two Ø5/16” to 23/32” roller discs - Cutting length: 49-1/4” - Diagonal cutting length: 33-1/2” x 33-1/2” SAP KEA Description - Cutting thickness: 1/4” - 25/32” 100005836 B83501006 1200 N

207 Ceramic tile cutting, drilling, and mitering Hand machines and cutting roller discs for ceramics TX plus roller disc

Roller discs for ceramic tile hand cutters, for a maximum precision and minimum vibration; no chipped tiles

They differ by the diameter of the wheel: Ø 5/16”: Clean and shallow incision; suitable for porcelain tiles Ø 3/8”: Deep incision; especially recommended for embossed porcelain tiles Ø 23/32”: Clean and shallow incision; especially recommended for large formats Ø 7/8”: Deep incision; especially recommended for hard materials

- Compatible with TX hand cutters SAP KEA Description - Wheel made with tungsten carbide - High resistance and life 100005837 B83502001 5/16” 100005838 B83502002 3/8” 100005840 B83502004 23/32” 100005842 B83502006 7/8”

TX plus gold roller disc

Long-lasting roller discs for ceramic tile hand cutters, for a maximum precision and minimum vibration; no chipped tiles

They differ by the diameter of the wheel: Ø 3/8”: Deep incision; especially recommended for embossed porcelain tiles Ø 23/32”: Clean and shallow incision; especially recommended for porcelain tiles, even large formats Ø 7/8”: Deep incision; especially recommended for hard materials

- Compatible with TX hand cutters - Wheel made with tungsten carbide SAP KEA Description with titanium surface treatment - Long-lasting 100005839 B83502003 3/8” 100005841 B83502005 23/32” 100005843 B83502007 7/8”

208 Ceramic tile cutting, drilling, and mitering Hand machines and cutting roller discs for ceramics TZ 1300 hand cutting machine

New type of hand cutting machine with maximum cutting power for all types of ceramic tiles, including formats with side up to 51-3/16” long

This cutter’s main features are the following: • Mobile separator with 3,306 lb. power, for cutting tiles up to 13/16”. • Flexural strength and sturdiness never-before-seen in a hand ceramic tile cutter. • Supplement base for excellent support of the ceramics. • Side stopper to make repetitive cuts and swivel angle for angle cuts • Double-cut guide system with reinforced extruded aluminum structure. • Roller discs of Ø5/16” to 7/8” adaptable to each material to obtain maximum perfor- mance and cutting quality. It includes carrying bag with wheels and two Ø5/16” to 23/32” roller discs - Cutting length: 51-3/16” - Diagonal cutting length: 35-7/16” x 35-7/16” - Cutting thickness: 1/8” - 13/16” SAP KEA Description 100213683 B83501132 1300

TZ 1550 hand cutting machine

New type of hand cutting machine with maximum cutting power for all types of ceramic tiles, including formats with side up to 51-3/16” long

This cutter’s main features are the following: • Mobile separator with 3,306 lb. power, for cutting tiles up to 13/16”. • Flexural strength and sturdiness never-before-seen in a hand ceramic tile cutter. • Supplement base for excellent support of the ceramics.

• Side stopper to make repetitive cuts and swivel angle for angle cuts Tools • Double-cut guide system with reinforced extruded aluminum structure. • Roller discs of Ø5/16” to 7/8” adaptable to each material to obtain maximum perfor- mance and cutting quality. It includes carrying bag with wheels and two Ø5/16” to 23/32” roller discs - Cutting length: 59-1/16” - Diagonal cutting length: 43-5/16” x 43-5/16” - Cutting thickness: 1/8” - 13/16” SAP KEA Description 100223745 B83501135 1550

TZ plus roller disc

Roller discs for ceramic tile hand cutters, for a maximum precision and minimum vibration; no chipped tiles

They differ by the diameter of the wheel: Ø 5/16”: Clean and shallow incision; suitable for porcelain tiles Ø 3/8”: Deep incision; especially recommended for embossed tiles Ø 23/32”: Clean and shallow incision; especially recommended for large formats Ø 7/8”: Deep incision; especially recommended for hard materials

SAP KEA Description 100224001 B83512047 5/16” - Compatible with TZ hand cutters 100223949 B83512044 3/8” - Wheel made with tungsten carbide - High resistance and life 100223990 B83512046 23/32” 100224000 B83512045 7/8”

209 Ceramic tile cutting, drilling, and mitering Hand machines and cutting roller discs for ceramics SG XL hand cutter

Hand cutter for perfect cutting of ceramic tiles, especially for cutting large-for- mat tiles, glazed or extruded tiles, and porcelain tiles. - Cutting length: 80-3/4” This cutter’s main features are the following: - Diagonal cutting length: 70-29/32” x • Mobile separator with 1,543 lb. power 70-29/32” / 78-3/4” x 11-13/16” • Ergonomic handle - Cutting thickness: 1/4” - 25/32” • 3-15/16” wide cutting lever • Side stopper to make repetitive cuts and swivel angle for angle cuts • Single-cut guide system in aluminum • Ø 1/2” roller disc

SAP KEA Description 100179062 B83501115 80-3/4”

SG XL roller disc

Roller disc for SG XL manual cutting machines

- Compatible with SG XL hand cutters - Porcelain tile SAP KEA Description 100179071 B83503064 1/2”

210 Ceramic tile cutting, drilling, and mitering Hand machines and cutting roller discs for ceramics SG 3 MAX hand cutter

Hand cutter for perfect cutting of ceramic tiles, especially for cutting tiles, glazed or extruded tiles, and porcelain tiles.

This cutter’s main features are the following: - Cutting length: 49-3/4” • Mobile separator with 2,645 lb power - Diagonal cutting length: • Ergonomic handle 35-3/16” x 35-3/16” • Padded cutting lever - Cutting thickness: 1/4” - 25/32” • Side stopper to make repetitive cuts and swivel angle for angle cuts • Single-cut guide system in steel • Ø 3/4” roller disc Tools

SAP KEA Description 100180421 B83501116 49-19/32”

211 Ceramic tile cutting, drilling, and mitering Hand machines and cutting roller discs for ceramics AJC1 ceramic grooving machine

Electric cutting machine for slotting porcelain tiles. Water-cooled, it includes gui- des and fastening clips that allow for the grooving of tiles starting at 3/8” thick - Wet cutting It includes: - Porcelain tile • Grooving machine - Maximum groove: 25/32” long x 5/32” • 2 AJC1 3-15/16” cutting blades wide • Water-pressure tank plus connection hose for cooling with water

SAP KEA Description 100120574 B79999009 701 W

AJC1 porcelain tile cutting disc

Wet-cutting blade for grooving of porcelain tiles.

- Wet cutting - Porcelain tile SAP KEA Description 100147971 B83512035 3-15/16”

212 Ceramic tile cutting, drilling, and mitering Hand machines and cutting roller discs for ceramics RMRB 13002200 electricelectric cuttercutter

Electric cutter with water-pump cooling system with regulation tap, for cutting and mitering ceramic tiles. - Cutting length: 86-19/32” The main features of this electric cutter are the following: - Diagonal cutting length: 61-1/32” x 61-1/32” • 3 HP Sliding motor on bearings, suitable for mitred cutting tiles with thickness - Cutting thickness: 3-9/16” up to 1-31/32’’ • 11-13/16’’ - 14-3/16’’ blade diameter • Power supply: 230V-50 Hz. • Spacious work table with double set of plates, a special one for miters. • Pulley for the movement of the cutter. It includes carrying case, cutting blade, and connection cable

SAP KEA 100242376 B83501143 Tools RB 1300 electric cutter

Electric cutter with water-pump cooling system with regulation tap, for cutting and mitering ceramic tiles. It is equipped with a 2mW laser tracer.

The main features of this electric cutter are the following: - Cutting length: 52” - Diagonal cutting length: • 3 HP Sliding motor on bearings, suitable for longitudinal cutting as miter up to 41-3/4” 36-13/16” x 36-13/16” in length. - Cutting thickness: 2” • 9-7/8” blade diameter • Power supply: 230V-50 Hz. • Spacious work table with double set of plates, a special one for miters. • Side stopper to make repetitive cuts. It includes carrying case, cutting blade, and connection cable

SAP KEA Description 100153447 B83501089 1300

213 Ceramic tile cutting, drilling, and mitering Hand machines and cutting roller discs for ceramics RB1S plus porcelain tile cutting disc

Dry-cutting blade for porcelain tile and hard materials. High performance and cu- tting speed with high quality finishes. Only for straight cut, do not use for miters.

Dimensions: • Outer diameter: 4-1/2”/4-7/8” • Inner diameter: 7/8” • Disk pad height: 3/8” • Disk pad thickness: 1/16”

- Dry cutting - Porcelain tile - Hard materials such as: granite, slate, SAP KEA Description and rustic tiles 100049688 B83512022 4-1/2” 100049694 B83512017 4-7/8”

RB2S porcelain tile cutting disc

Dry-cutting blade for porcelain tile. High performance and cutting speed with high quality finishes. Only for straight cut, do not use for miters.

Dimensions: • Outer diameter: 4-1/2” • Inner diameter: 7/8” • Disk pad height: 9/32” • Disk pad thickness: 4-1/2”

- Dry cutting - Porcelain tile

SAP KEA Description 100097327 B83512028 115 mm

RB3S multifunctional cutting disc

Multifunctional dry-cutting blade. High performance and cutting speed with greater resistance to high temperatures. Only for straight cut, do not use for mi- ters.

Dimensions: • Outer diameter: 4-1/2” • Inner diameter: 7/8” • Disk pad height: 5/32” • Disk pad thickness: 3/32”

- Dry cutting - Metal, plastic, and wood SAP KEA Description - Ceramics and natural stone 100224224 B83512048 4-1/2”

214 Ceramic tile cutting, drilling, and mitering Hand machines and cutting roller discs for ceramics RB1H plus porcelain tile cutting blade

Wet-cutting blade for porcelain tiles. High performance and cutting speed with high quality finishes. Only for straight cut, do not use for miters.

Dimensions: • Outer diameter: 9-7/8” / 11-13/16” • Inner diameter: 1” • Disk pad height: 3/8” • Disk pad thickness: 1/16”

- Wet cutting - Porcelain tile - Hard materials such as: granite, slate, and rustic tiles SAP KEA Description 100179070 B83512039 9-7/8”

RB2H porcelain tile cutting blade

Wet-cutting blade for porcelain tiles. Suitable for all kinds of ceramic tiles and stone with a thickness greater than 1”.

Dimensions: • Outer diameter: 9-7/8” • Inner diameter: 1” • Disk pad height: 9/32”

• Disk pad thickness: 3/32” Tools

- Wet cutting - Porcelain tile

SAP KEA Description 100179061 B83512038 9-7/8”

RB3H porcelain tile fine cutting blade

Wet-cutting blade for porcelain tiles with thickness under 1”. Specially recom- mended for mitering porcelain tiles.

Dimensions: • Outer diameter: 9-7/8” • Inner diameter: 1” • Disk pad height: 9/32” • Disk pad thickness: 3/32”

- Wet cutting - Porcelain tile SAP KEA Description - Fine cutting 100006080 B83512004 9-7/8”

215 Ceramic tile cutting, drilling, and mitering Hand machines and cutting roller discs for ceramics RB3H glass mosaic cutting blade

Wet-cutting blade for glass mosaic. Maximum cutting quality, suitable for all kinds of ceramic tiles and stone with a thickness greater than 1’’.

Dimensions: • Outer diameter: 9-7/8” • Inner diameter: 1” • Disk pad height: 9/32” • Disk pad thickness: 3/32”

- Wet cutting - Glass mosaic - Porcelain tile and other hard materials

SAP KEA Description 100228784 B83512050 9-7/8”

TR1S metal fine cutting blade

Dry-cutting blade for stainless steel and metals in general. Specially recommen- ded for precision work such as mitering in pro-skirting profiles.

Dimensions: • Outer diameter: 4-1/2” • Inner diameter: 7/8” • Disk pad thickness: 1/32”

- Dry cutting - Metal profiles - Very thin cut

SAP KEA Description 100227250 B83512049 4-1/2”

216 Ceramic tile cutting, drilling, and mitering Drill bits for drilling ceramics Diamond bits

Diamond bits for dry-drilling all types of ceramic tiles, including porcelain tiles and other materials such as marble and granite.

Compatible both with grinders (radial cutting machine) and electric drills with suitable - Dry drilling - M13 thread adapter. Do not exceed 14,000 rpm or use in hammer mode; for a better finish and longer - Maximum drilling depth: 1-13/32 life of the drill bit, use a slight orbital motion during drilling. Although the average life of bits depends on the type of material, its thickness, proper cooling, and diameter of the bit; as guidance, it can be: 25 holes for the Ø1/4” - 15/32” ones, and 60 holes for the Ø25/32” - 2-15/16” ones

SAP KEA Description 100145195 B83503058 1/4” 100145196 B83503057 5/16” 100145193 B83503055 3/8” Tools 100145194 B83503056 15/32” 100005859 B83503009 25/32” 100005860 B83503010 1-3/32” 100005867 B83503018 1-3/8” 100005861 B83503012 1-11/16” 100005862 B83503013 1-31/32” 100005863 B83503014 2-3/8” 100005864 B83503015 2-9/16” 100165336 B83503059 2-11/16” 100179019 B83503062 2-15/16”

217 Ceramic tile cutting, drilling, and mitering Accessories Drilling Guide

The MULTIDRILL guide allows for an effective centering in the drilling the holes both in dry cutting and wet cutting.

With high accuracy and reliability, the MULTIDRILL guide ensures a precise perforation and prevents potential movements of the bit.

- Dry or wet drilling - Fastening using suction cup - Suitable for drills up to Ø 3-1/4”

SAP KEA 100171116 B83503060

Maintenance kit for cutting machines

- It includes cloth and cleaning and lubricating oil bottle. - This kit includes a fine cleaning cloth and a bottle of cleaning and greasing oil, suitable for the perfect maintenance of construction machinery, guiding and sli- ding systems, swiveling axis, threads, etc.

SAP KEA 100007786 B83520001

218 Mixing of mortars and joint materials Mixers for mortars and liquids RB16 electric mixer

1600 W power electric mixer for mixing mortars, liquids, and other materials. The ergonomic handle is adjustable in height, adapting perfectly to any user. - Suitable for cement-based adhesives, This mixer’s main features of are the following: paints, and other materials. - FAST-IN type rod connecting system • Electric mixer with great power: 1600 W. - Ergonomic height-adjustable two-ma- • Two-material handle with greater comfort and stability terial handle • 2-speed gearbox (1st 0-580 RPM / 2nd 0-800 RPM).. • Progressive switch. • Direct-coupling thread for mixers with M14 finish. • Maximum Ø of mixer: 63” • Double insulation. • Very lightweight: 10 lb It includes carrying case, Ø 5-1/2” mixer rod, and 118-1/8” power cord. Tools

SAP KEA Description 100184063 B83513052 1600 W 230V-50-60Hz

M 140 mixer rod

Mixer rod for cement-based mortars with a propeller designed to carry out an up-and-down movement.

With this type of rod the material goes up at low speed, on the inside of the rod head, and down on the outside of it, and achieves a uniform mix of highly viscous materials such as mortars, cements, and especially improved cement-based adhesives (type C2) for ceramic tile.

- Suitable for cement-based adhesives, paints, and other materials. - Exclusive use with mixers with FAST-IN connection system SAP KEA Description - Quick connection without tools 100184115 B83513053 Ø 5-1/2”

219 Mixing of mortars and joint materials Mixers for mortars and liquids RB9 electric mixer

1200 W power electric mixer for mixing mortars, liquids, and other materials. Construction with lightweight and strong materials for maximum reliability. - Suitable for cement-based adhesives, paints, and other materials. - Interchangeable mixing rod with M14 connection - Double two-material handle.

SAP KEA Description 100172448 B83513048 1200 W 210-240V50-60Hz

220 Mixing of mortars and joint materials Mixers for mortars and liquids Mixer rod

Mixer rod for cement-based mortars with a propeller designed to carry out an up-and-down movement.

With this type of rod the material goes up at low speed, on the inside of the rod head, and down on the outside of it, and achieves a uniform mix of highly viscous materials such as mortars, cements, and especially improved cement-based adhesives (type C2) for ceramic tile.

- Suitable for cement-based adhesives, paints, and other materials. - Hexagonal connection. SAP KEA Description - Mixing capacity: 22-33 lb 100006096 B83513006 Ø 3-1/8” Height: 21-5/8” 100006097 B83513007 Ø 3-15/16” Height: 15-3/4”

L 80 mixer rod

Mixer rod for liquids with a propeller designed to carry out an up-and-down mo- vement.

With this type of rod the material is sucked on the inside from the top of the head, and ascends on the outside, at a lower speed. This downward movement is the most sui- table and recommended for mixing low-viscosity materials such as paints, insulation, Tools adhesives in dispersion, fibers, gypsum, etc.

- Suitable for liquids and other low-den- sity and highly fluid materials. - Hexagonal connection. - Mixing capacity: 11-33 lb SAP KEA Description 100006101 B83513016 Ø 3-1/8” Height: 15-3/4”

221 Tools and accessories for installing ceramics Notched trowels RFLEX handle notched trowel

Notched trowel with steel sheet and open RFLEX handle, for the application of adhesives for installation of ceramics

The open-handle trowel and comb models make their control easier when applying the material. One of the characteristics that professional ceramic tile installers love is this type of open handle; thanks to its open aperture, the tool can be hung from the edge of the bucket, hod, or any other container holding the material to be applied. This allows them to have the trowel or comb always at hand and clean.

SAP KEA Description 100031415 B83507066 1” 1/8”x1/8” 100037970 B83507070 11” 3/16”x3/16” - Special high-resistance steel sheet. 100007963 B83507060 11” 1/4”x1/4” - Protection against corrosion with co- lorless varnish. 100007924 B83507058 11” 5/16”x5/16” - Ergonomic open handle with alumi- 100007960 B83507059 11” 3/8”x3/8” num core. 100047286 B83507072 11” 1/2”x1/2” 100008432 B83507062 11’’ ∩ 3/8’’

MBC handle notched trowel

Notched trowel with steel sheet and MBC closed handle, for applying adhesives for installation of ceramics

The closed handle provides a symmetrical, perfect tool to be used both by right and left-handed persons, while it is a more centered tool and easier to control and handle.

- Special high-resistance steel sheet. SAP KEA Description - Protection against corrosion with co- lorless varnish. 100079169 B83507099 10-5/8” 3/8”x3/8” - Ergonomic closed handle with two tex- 100213920 B83507122 11” 1/2”x1/2” tures.

MMA handle notched trowel

Notched trowel with steel sheet and open MMA handle, for the application of ad- hesives for installation of ceramics

The open-handle trowel and comb models make their control easier when applying the material. One of the characteristics that professional ceramic tile installers love is this type of open handle; thanks to its open aperture, the tool can be hung from the edge of the bucket, hod, or any other container holding the material to be applied. This allows them to have the trowel or comb always at hand and clean.

SAP KEA Description - Special high-resistance steel sheet. 100145161 B83507111 11” 1/4”x1/4” - Protection against corrosion with co- 100145162 B83507109 11” 5/16”x5/16” lorless varnish. 100145159 B83507112 11” 3/8”x3/8” - Wood open handle, soft touch. 100145160 B83507113 11” 1/2”x1/2”

222 Tools and accessories for installing ceramics Notched trowels MMC handle notched trowel

Notched trowel with steel sheet and MMC closed handle, for applying adhesives for installation of ceramics

The closed handle provides a symmetrical, perfect tool to be used both by right and left-handed persons, while it is a more centered tool and easier to control and handle.

SAP KEA Description 100005923 B83506014 1” 1/8”x1/8” - Special high-resistance steel sheet. 100005920 B83506011 11” 1/4”x1/4” - Protection against corrosion with co- lorless varnish. 100005918 B83506009 11” 5/16”x5/16” - Closed wood handle, soft touch. 100005916 B83506007 11” 3/8”x3/8” 100005914 B83506005 11” 1/2”x1/2” 100005922 B83506013 11” ∩ 3/8”

MMC handle 18-7/8” notched trowel

Notched trowel with steel sheet and MMC closed handle, for applying adhesives for installation of ceramics

The closed handle provides a symmetrical, perfect tool to be used both by right and left-handed persons, while it is a more centered tool and easier to control and handle. Tools

- Special high-resistance steel sheet. - Protection against corrosion with co- lorless varnish. SAP KEA Description - Closed wood handle, soft touch. 100049467 B83507075 18-7/8” 3/8”x3/8”

223 Tools and accessories for installing ceramics Pliers and cutting accessories Cutting pliers

Pliers for cutting mosaic with hard tungsten carbide edge, perfect for cutting tile or other glass mosaic pieces.

The curved cutting notches of these pliers provide a clean and safe cut on fragile and easy to break materials. It reduces the pressure to make to get a good cut.

- Cutting mosaic pieces - Maximum cutting thickness: 19/32” - Two-material ergonomical handle

SAP KEA 100005996 B83510016

Abrasive block for corners

Abrasive block for ceramics with two sides of different particle size. Suitable both for rectifying cuts and minor deviations and for softening edges and glazing flaws.

The coarser grain of the abrasive block is used for reducing irregularities or small bumps obtained after cutting the ceramic tile, while the thinner grain is used to define and eliminate the chipping caused by scratching or cutting of the material and thus obtain a perfect finish.

- Two textures: coarse and fine grain

SAP KEA Description 100007785 B83510050 5-7/8” x 2”

224 Tools and accessories for installing ceramics Trowels and spatulas Putty applicator

Hand extruder for 9.5 / 10.1 U.S. oz cartridges for all types of putties

Double cam with elastic damper. Less effort for higher performance.

- 9.5 / 10.1 U.S. oz cartridges - Maximum cartridge: 8-1/2” x Ø 1-7/8” - Ergonomic handle and trigger

SAP KEA 100032733 B83520002 Tools

225 Tools and accessories for installing ceramics Suction cups Simple suction cup

Tool for handling tiles, specially recommended for large-formats

Simple and easy to use; especially recommended in small formats

- Up to 88 lb - Up to 47-1/4” x 47-1/4” x 15/32” tiles - Ergonomic open closed handle.

SAP KEA Description 100005983 B83510003 Ø 4-3/4” simple

Double suction cup

Tool for handling tiles, specially recommended for slabs and tiles weighing over 77 lb

Manufactured in aluminum, it has an ergonomic open handle that facilitates the hand- ling of the slabs and ceramic tiles. Do not use with formats smaller than 13-3/4”.

- Up to 176 lb - All kinds of tile formats and thicknes- ses. - Maximum comfort and ease of use SAP KEA Description 100110173 B83510074 Ø 4-3/4” Double

Vacuum suction cup

Tool for handling tiles, specially recommended for heavy or embossed-surface tiles

- Over 176 lb - Manufactured in non-staining gray ru- SAP KEA Description bber - It includes case 100202988 B83510091 Ø 5-7/8” Simple

226 Tools and accessories for installing ceramics Rubber mallets and levels Rubber mallet flat/round ends

Mallet for good settlement and correct positioning of ceramic tiles during their installation.

White rubber malets will reduce risk of stains on the tile surface.

- Rubber mallet with one flat and one round face. - Flat face for strong blows - Round face for blows with any angle; maximum precision SAP KEA Description 100212000 B83510097 1.1 lb white

Rectangular spirit level

Spirit level for making levels during the installation of ceramics

Made of aluminum, it has a machined base to ensure constant accuracy, magnets for mounting on metal surfaces, and rubber protectors resistant to impacts on both ends. Tools

- Three spirits for checking horizontal, vertical, and 45° levels. - Accuracy: 0.006 in/ft - Manufactured in aluminum profile. SAP KEA Description 100152164 B83521032 19-11/16”

227 Tools and accessories for installing ceramics Rubber trowels MMC handle epotech trowel

Rubber trowel for epoxy-type joint materials. Specially recommended for joints over 3 mm wide.

The closed handle provides a symmetrical, perfect tool to be used both by right and left-handed persons, while it is a more centered tool and easier to control and handle.

- Applying epoxy joints - Solid rubber sheet - Closed wood handle, soft touch.

SAP KEA Description 100047229 B83507073 9-7/8” Solid rubber

MBC handle colorstuk trowel

Rubber trowel for cement-based joint materials. Specially recommended for joints up to 1/8” wide.

The closed handle provides a symmetrical, perfect tool to be used both by right and left-handed persons, while it is a more centered tool and easier to control and handle.

- Applying cement-based joints - Rubber sheet with intermediate natu- ral rubber sheet - Ergonomic closed handle. SAP KEA Description 100005942 B83507018 9-7/8” MBC handle

MMC handle colorstuk trowel

Rubber trowel for cement-based joint materials. Specially recommended for joints up to 1/8” wide.

The closed handle provides a symmetrical, perfect tool to be used both by right and left-handed persons, while it is a more centered tool and easier to control and handle.

- Applying cement-based joints - Rubber sheet with intermediate natu- SAP KEA Description ral rubber sheet - Closed wood handle, soft touch. 100005941 B83507017 9-7/8” MMC handle

228 Tools and accessories for installing ceramics Rubber trowels Rubber float for joints

Float with closed plastic handle plus rubber trowel for applying cement-based joint materials. It includes an interchangeable rubber sheet for applying ce- ment-based joint materials. Specially recommended for joints up to 1/8” wide. -Sponge length: 11-3/8” - Applying cement-based joints The closed handle provides a symmetrical, perfect tool to be used both by right and - Medium-density rubber left-handed persons, while it is a more centered tool and easier to control and handle. It includes a float and a sponge

SAP KEA Description 100223791 B83508039 It includes float + sponge 100223764 B83508040 1 sponge Tools Rubber trowel for cement-based joints

Basic rubber trowel for cement-based joint materials.

Each side of the trowel has a different edge angle: 42° for narrow joints, and 18° for wide joints

- Applying cement-based joints - Soft rubber

SAP KEA Description 100223793 B83507123 9-7/8”

Rubber trowel for epoxy joints

Basic rubber trowel for epoxy joint materials.

Each side of the trowel has a different edge angle: 42° for narrow joints, and 18° for wide joints

- Applying epoxy joints - Hard rubber

SAP KEA Description 100223749 B83507124 9-7/8”

229 Tools and accessories for installing ceramics Cleaning of joints Float with sponge

Float with closed plastic handle plus interchangeable sponge with soft texture for fine finish. Specially recommended for cleaning of cement-based joints.

It includes a soft sponge for fine finish

- Cleaning of cement-based joints - It includes a float and a sponge

SAP KEA Description 100085716 B83508019 11-3/4” x 5-1/8”

Plastic handle and colorstuk sponge replacements

Interchangeable sponge with soft texture for fine finish. Specially recommended for cleaning of cement-based joints.

- Cleaning of cement-based joints - Soft sponge. Fine finish - 1 unit SAP KEA Description 100085715 B83508020 11-3/4” x 5-1/8” 100243030 B83508043 plastic handle

Plastic handle and epotech sponge replacements

Interchangeable cellulose sponge for cleaning with acid or solvent-based chemi- cals and especially for cleaning epoxy joints.

Maximum strength and degree of absorption.

- Cleaning epoxy joints SAP KEA Description - 100% vegetable cellulose sponge 100179043 B83508037 11-3/4” x 5-5/16” - 1 unit 100243030 B83508043 plastic handle

230 Tools and accessories for installing ceramics Cleaning of joints Float for final cleaning

Float with abrasive scourers for cleaning ceramic surfaces and other coating ma- terials.

9-7/8” x 3-15/16”, 1” 9-7/8” thick interchangeable scourers: • Red: Soft texture, ideal for cleaning slightly-attached dirt and maintenance on delica- te surfaces. • Blue: Medium texture, ideal for general cleaning and maintenance of glazed ceramic tiles. • Brown: Strong texture, ideal for cleaning strongly-attached dirt and maintenance of rough and very resistant surfaces.

- Cleaning of ceramic surfaces and other materials - Float with plastic handle - 1 float + 3 scourers SAP KEA Description 100005970 B83508013 9-7/8” x 3-15/16”

Replacement very soft scourers

Interchangeable scourers for maintenance cleaning and waxing surfaces and de- licate materials. Tools

- Cleaning of ceramic surfaces and other materials - Very soft scourers SAP KEA Description - Sponge size: 9-7/8” x 3-15/16” 100223699 B83508041 1 unit 100005894 B83504024 3 units

Replacement strong scourers

Interchangeable scourers for cleaning strongly-attached dirt and maintenance of rough and very resistant surfaces.

- Cleaning of ceramic surfaces and other materials SAP KEA Description - Strong scourers - Sponge size: 9-7/8” x 3-15/16” 100005895 B83504025 3 units

231 Tools and accessories for installing ceramics Cleaning of joints Pail for cleaning joints

Pail for wringing sponges used in the cleaning of joints. High drain capacity.

High-strength pail with 4 wheels and transport handle

- Wringing of cleaning sponges - 3 wringing spiral rollers and grid base - Measurements: 20-7/8” x 11” x 14-9/16”

SAP KEA Description 100229783 B83508042 Max cap.: 5.8 gal Use cap.: 2.64 gal

Colorstuk sponge

High-absorption cleaning sponge for all kinds of on-site work. Specially recom- mended for cement-based joints.

- Cleaning of cement-based joints - Soft sponge. Fine finish - 1 unit

SAP KEA Description 100223785 B83507125 6-5/16” x 4-3/4” x 2-3/4”

Epoxy sponge

Cellulose cleaning sponge for epoxy joints

- Cleaning epoxy joints - 100% vegetable cellulose sponge SAP KEA Description - 1 unit 100085287 B83508018 7-1/2” x 4-3/4” x 1-19/32”

232 Tools and accessories for installing ceramics General cleaning Epoxy cleaning kit

Cleaning kit for epoxy joint remains before their final hardening. It includes an epotech cleaner bottle, water-based detergent for cleaning off epoxy putties re- mains and stains.

It includes: • 1 MMC handle epotech trowel • 1 Epoxy sponge • 1 Float for final cleaning + 3 scourers • 1 6.7 fl oz epotech cleaner bottle

- Cleaning of epoxy remains - Professional use

SAP KEA 100113684 B35200002

Hand scraper for joints

Joint scraper for emptying of tiling joints. It allows for the use of one, two, or three blades at the same time, allowing the emptying of 5/64” to 15/64”-wide joints.

It includes two interchangeable 5/64” wide tungsten carbide blades. Tools

- Joint width: 5/64” to 15/64” - 5/64”-wide blades made of tungsten carbide. SAP KEA - Ergonomic handle 100005988 B83510008 100007783 B83510051

Metal profile cleaner

Metal polishing

Apply on a soft cloth and rub on the surface to clean

- Chromed surfaces - Aluminium SAP KEA Description - Hard PVC 100252184 B83508044 3.38 fl oz

233 Tools and accessories for installing ceramics Personal protection Pad for knees

This pad is the ideal replacement for knee pads, for all those professionals who do not like to wear, on a permanent basis, an item on the knee.

Manufactured with an open dual-density polyurethane structure, an outer, more com- pact and resistant one, and an inner lighter and more deformable, it provides strength and protection, as well as a high degree of comfort and practicality.

- Polyurethane pad for protecting the knees. - It prevents the use of knee pads for the installation of floors. - Suitable as a seat. SAP KEA Description 100006152 B83514078 17” x 7-1/4” Black

RM1 knee pads

Set of knee pads for the floor installer. It protects knees and prevents stains from contact with the adhesive.

It includes two elastic fastening straps for each of the two knee pads

- Protection of the knees during the ins- tallation of floors - Flexible extension for protection of the upper part of the knee SAP KEA Description - Soft interior 100223779 B83514146 Set of 2 knee pads 100223790 B83514145 Replacement strap (1 unit)

234 Tools and accessories for installing ceramics Floor protection Butech protect kit

Flooring protection system using rigid polypropylene plates protecting against medium and low-type impacts, dragging, or surface abrasion. Reusable. - Protection of floors during construc- Manufactured in alveolar polypropylene, it resists contact with the water, as well as with tion works the products most commonly used in construction such as cement, plaster, or construc- - It includes: 15.06 sq ft slabs plus case of tion cleaners. the same material (16.14 sq ft) - Slab measurements: 55-1/8” x 78-3/4” x 5/64” wide Tools

SAP KEA Description 100203407 B85900055 166.84 sq ft / kit

Butech protect adhesive tape

Self-adhesive tape for the union between butech protect slabs.

- Self-adhesive tape - Tape width: 1-29/32” SAP Description 225008690 Adhesive tape 433 feet/roll

235 Tools and accessories for installing ceramics Micro-stuk tools Micro-stuk steel smooth trowel

Stainless steel trowel for the applying the different layers that make up the Mi- cro-stuk continuous covering. Suitable both for base layers and final layers

The steel sheet has an angled finish that reduces trowel marks on the Micro-stuk coa- ting. Open ergonomic plastic handle.

- Application of Micro-stuk base layer - Application of Micro-stuk finish layer - Troweled finish

SAP KEA Description 100181525 B83507120 11-3/4” x 4-3/8”

Micro-stuk rubber trowel

Flexible plastic trowel for applying fine layers of Micro-stuk continuous coating.

Closed wooden handle

- Application of Micro-stuk finish layer - Uniform finish

SAP KEA Description 100181526 B83507121 11-3/8” x 5-1/8”

236 Tools

237 Showrooms

United States 801 E Expy 83 - GILSA NORTH AMERICA T: +1 956 223 2900 Anaheim - PORCELANOSA ANAHEIM T: +1 714 772 3183 · F: +1 714 772 9851 Atlanta - PORCELANOSA ATLANTA T: 3057157153 Boston - PORCELANOSA BOSTON - BOSTON DESIGN CENTER T: +1 617-963-7666 · F: +1 617-963-7675 Chicago - PORCELANOSA CHICAGO T: +1 312 204 6220 · F: +1 312 204 6240 Dallas - PORCELANOSA DALLAS T: +1 214 377 2327 · F: +1 214 234 1340 East Brunswick - PORCELANOSA EAST BRUNSWICK T: +1 732 613 1915 · F: +1 732 613 9181 Glendale - GLENDALE TILE T: +1 818 500 8505 Hermosa Beach - AMIRIAN HOME T: +1 424 390 4460 King Of Prussia - Porcelanosa King of Prussia T: 14847510050 · F: 14847510047 Miami - PORCELANOSA MIAMI T: +1 305 715 7153 · F: +1 305 592 6999 MIAMI - PORCELANOSA MIAMI DESIGN DISTRICT T: 001 786 329 6753 New York City - PORCELANOSA MANHATTAN FLAGSHIP STORE T: 16467511180 North Bethesda - PORCELANOSA ROCKVILLE T: +1 301 294 8193 Paramus - PORCELANOSA PARAMUS T: +1 201 712 0556 · F: +1 201 599 1520 Pompano Beach - PORCELANOSA POMPANO BEACH T: +1 954 968 7666 · F: +1 954 968 7699 Ramsey - PORCELANOSA RAMSEY T: +1 201 995 1310 · F: +1 201 995 1960 Riverside - PORCELANOSA RIVERSIDE T: +1 203 698 7618 · F: +1 203 698 7619 San Diego - PORCELANOSA SAN DIEGO T: +1 858 322 6012 San Francisco - PORCELANOSA SAN FRANCISCO T: +1 415 593 7763 · F: +1 415 593 7664 San José - PORCELANOSA SAN JOSE T: +1 408 467 9400 · F: +1 408 467 9410 Seattle - PORCELANOSA SEATTLE T: 2066738395 · F: 2066738402 Walnut Creek - PORCELANSOA WALNUT CREEK T: +1 925 952 7430 · F: Washington DC - PORCELANOSA WASHINGTON DC T: 12022041655 · F: West Hollywood - PORCELANOSA WEST HOLLYWOOD T: +1 310-300-2090 · F: Westbury - PORCELANOSA WESTBURY T: +1 516 338 0097 · F: +1 516 338 0098 Canada Vancouver - FONTILE DISTRIBUTORS T: +604 683 9358 · F: +604 683 6758 Calgary - Porcelanosa Calgary T: (587) 349-2290 Brampton - PORCELANOSA East Canada T: 9054541053 · F: 9054541055

238 239 USA Corporate Office - Ramsey [email protected] - www.porcelanosa-usa.com

butech building technology, s.a. Ctra. Vila-real - Puebla de Arenoso (CV-20), Km. 2.5 · PO Box 297 · 12540 Villarreal, Castellón - SPAIN. Telephone (+34) 964 53 62 00 · Fax: (+34) 964 53 00 34 · E-mail: [email protected] · www.butech.es

240 241 CALIFORNIA COLORADO CONNECTICUT DISTRICT OF COLUMBIA FLORIDA GEORGIA ILLINOIS MARYLAND MASSACHUSETTS NEW JERSEY NEW YORK PENNSYLVANIA TEXAS WASHINGTON CANADA

www.porcelanosa-usa.com 03-19

242