Jet Fitting 3: a Generic C++ Package for Estimating the Differential Properties on Sampled Surfaces Via Polynomial Fitting Frédéric Cazals, Marc Pouget
Jet fitting 3: A Generic C++ Package for Estimating the Differential Properties on Sampled Surfaces via Polynomial Fitting Frédéric Cazals, Marc Pouget To cite this version: Frédéric Cazals, Marc Pouget. Jet fitting 3: A Generic C++ Package for Estimating the Differential Properties on Sampled Surfaces via Polynomial Fitting. ACM Transactions on Mathematical Software, Association for Computing Machinery, 2008, 35 (3). inria-00329731 HAL Id: inria-00329731 https://hal.inria.fr/inria-00329731 Submitted on 2 Mar 2016 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Jet fitting 3: A Generic C++ Package for Estimating the Differential Properties on Sampled Surfaces via Polynomial Fitting FRED´ ERIC´ CAZALS INRIA Sophia-Antipolis, France. and MARC POUGET INRIA Nancy Gand Est - LORIA, France. 3 Surfaces of R are ubiquitous in science and engineering, and estimating the local differential properties of a surface discretized as a point cloud or a triangle mesh is a central building block in Computer Graphics, Computer Aided Design, Computational Geometry, Computer Vision. One strategy to perform such an estimation consists of resorting to polynomial fitting, either interpo- lation or approximation, but this route is difficult for several reasons: choice of the coordinate system, numerical handling of the fitting problem, extraction of the differential properties.
[Show full text]