DOCSLIB.ORG

Fan Coil Units

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Fan Coil Units PRODUCTS > Fan Coil Units OUTSIDE HUMIDITY 35°C 90% 45°C 40% ºC 22Inside PROVIDED BY HEINEN & HOPMAN Heating Ventilation Air Conditioning Refrigeration FAN COIL UNITS Types EST Green technology Heinen & Hopman fan coils units are designed to operate in the marine - SIGMA: Fan coil unit with casing. Energy-saving technology is applied to industry where high standards are Capacity: 0,6 kW - 11.72 kW our fan coil units to obtain extremely required. - PRISMA: Fan coil unit with low electrical absorption and a casing. Capacity: 0.6 kW - 3.90 kW continuous modulation of the air flow, - LOW BODY: Fan coil unit with or related to the energy needs in the without casing, designed for instal- room. lation in small niches.EST (Energy Capacity: Saving 0.6 Technology)Energy-saving istechnology applied tois the EURAPO fan coil units and cassette units. It permits to kW - 3.90 kW. obtain extremely low electricalcomposed absorption by a brushless and a continuousmotor modulation of the air flow, constantly related to the - CONCEALED: Fan coil unit combined with an inverter, managed without casing. concreteCapacity: need0.6 kW of -energy by in specific the room. regulators. 11.72 kW. EST technology is composedCompared by toa unitsbrushless with asynchronous motor combined to a dedicated electronic device (inverter), - Fan coil unit designed for ATL: managed by specific regulators3-speed developed motors, the by fan EURAPO coil units. Yacht sector. with brushless motors will reduce the - Custom made:In comparison Fan coil unit to the traditionalpower consumption units equipped up to with 70%. asynchronous three-speed-motors, the fan coil and cassette designed on customerunits with request. brushless motors can obtain a considerable energy saving, by reducing the power consumption up to 70%. 80% 80% W W speed 1 70% 70% speed 2 60% 60% EST 50% 50% speed 3 speed 4 40 % 40% speed 5 30 % 30% speed 6 20 % 20% 10% 10% Our mission: m3/h m3/h 0% 0% To ensure you the speed 6 speed 5 speed 4 speed 3 speed 2 speed 1 perfect“ climate indoors,“ Asynchronous fan coil absorption (W) Energy saving with EST fancoil EST fancoil absorption (W) regardless of the weather outside. Thanks to the step-less modulation of the fan speeds it is possible to accurately regulate the air volume in a very precise way, in strict relation to the real need of air conditioning in the room. Oscillations in the temperature and relative humidity are reduced at lowest level: a guarantee for the highest comfort in the room. The possibility to reach very low air volumes makes the units extremely quiet at the lowest motor revolutions. EST technology is designed in particular for offices, hospitals, nursing homes and hotels. It is available for the EURAPO range of fan coil units, cassette units and ducted units. The EST technology consists of a brushless motor combined to a dedicated electronic device (inverter), managed by specific regulators. The controller uses a modulating signal with 0-10Vdc tension in order to regulate the fan speed. The brushless electric motor is composed by a rotor having permanent magnets, whose magnetic fields interact with the ones produced by the stator winding. The transfer of current is no longer by mechanical commutation (sliding contacts) but by an electronic commutation system: an electronic controller (inverter) powers the motor’s stator and generates rotating magnetic fields, that determine the rotor’s speed. SIGMA PRISMA mod. SH mod. SH/AF mod. PH mod. PH/AF mod. SV mod. SV/AF mod. PV mod. PV/AF mod. SV mod. PV SIGMA fan coil units A C • Fan coil unit with casing • Heating and cooling applications B • Capacity: 0.6 kW - 11.7 kW SIGMA fan coils units can be used in all environments and for different applications. The fan coil units are highly reliable in performance. FANCOIL UNITFANCOIL The fan coil units can be installed on the floor or on the ceiling in both configurations. mod. SH/AF mod. PH/AF Casing The casing, with upper air outlet, is made of sheet steel and painted with oven-dried epoxy powders, available in all RAL colors. The access doors and grilles are made of white heat-resistant ABS and can be turned into all four directions. The filter is fully retractable and easily accessible. Models Dimensions and weight Model: SV - SV/AF - SH - SH/AF 110 112 114 216 218 220 222 224 226 228 Dimensions (mm) and weight for SV - SV/AF - SH - SH/AF Dimensions (mm) and weight for PV - PV/AF - PH - PH/AF A 648 773 898 1023 1148 1273 1273 1523 1523 1773 B 538 538 538 538 110538112 114 614216 218 220614 222 224614226 228 614 614110 112 114 216 218 SV-- A --SH648 773 898 1023 1148 1273 1273 1523 1523 1773 A 648 773 898 1023 1148 C 224 224 224 224 B 538 224538 538 254538 538 614254 614 614 254614 614 254 B 254560 560 560 560 560 kg 18 20 23 28 SV - SH 31 41 44 52 52 PV - PH 58 SV/AF-- C --SH/AF224 224 224 224 224 254 254 254 254 254 C 226 226 226 226 226 C 233 233 233 233 Kg 18 23320 23 26328 31 41263 44 52 26352 58 263 Kg 26317 20 23 27 31 kg 19 21 24 30 SV/AF - SH/AF32 43 46 54 54 PV/AF - PH/AF61 C 233 233 233 233 233 263 263 263 263 263 C 235 235 235 235 235 Kg 19 21 24 30 32 43 46 54 54 61 Kg 18 21 24 28 32 HYDRAULIC CONNECTION 1/2” G F HYDRAULIC CONNECTION 1/2” G F Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice. SIGMA PRISMA mod. SH mod. SH/AF mod. PH mod. PH/AF mod. SV mod. SV/AF mod. PV mod. PV/AF PRISMA fan coil units mod. SV mod. PV A C • Fan coil unit with casing • Heating and cooling applications (PV and PV/AF only) • Capacity: 0.6 kW - 3.9 kW B The PRISMA fan coil units have an original shape. The casing is a piece of furniture, made of painted metal sheet with side flaps and grilles made of ABS. The fan coil units can be installed on the floor or on the ceiling. The air intake can be located on the bottom or on the front in both configurations. UNITFANCOIL mod. SH/AF mod. PH/AF Casing The casing, with upper air outlet, is made of sheet steel and painted with oven-dried epoxy powders, available in all RAL colors. The access doors and grilles are made of white heat-resistant ABS and can be turned into all four directions. The filter is fully retractable and easily accessible. Models Dimensions and weight Model: PV - PV/AF - PH - PH/AF 110 112 114 216 218 A 648 773 898 1023 1148 B 560 560 560 560 560 PV-- --PH Dimensions (mm) and weight for SV - SV/AF - SH - SH/AF Dimensions (mm) and weight for PV - PV/AF - PH - PH/AF C 226 226 226 226 226 kg 17 20 23 27 31 110 112 114 216 218 220 222 224 226 228 110 112 114 216 218 PV/AF-- --PH/AF A 648 773 898 1023 1148 1273 1273 1523 1523 1773 A 648 773 898 1023 1148 C 235 235 235 235 235 B 538 538 538 538 538 614 614 614 614 614 B 560 560 560 560 560 kg 18 21 24 28 32 SV - SH PV - PH C 224 224 224 224 224 254 254 254 254 254 C 226 226 226 226 226 Kg 18 20 23 28 31 41 44 52 52 58 Kg 17 20 23 27 31 SV/AF - SH/AF PV/AF - PH/AF C 233 233 233 233 233 263 263 263 263 263 C 235 235 235 235 235 Kg 19 21 24 30 32 43 46 54 54 61 Kg 18 21 24 28 32 HYDRAULIC CONNECTION 1/2” G F HYDRAULIC CONNECTION 1/2” G F Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice. LOW BODY CONCEALED mod. SVR mod. CH mod. CH/AF mod. CVR mod. CV mod. CV/AF LOW BODY fan coil units mod. CVR mod. CV/AF • Fan coil unit with casing • Heating and cooling applications • Capacity: 0.48 kW - 3.7 kW The LOW BODY fan coils units have a reduced height (427 mm) and can be installed in small niches. The low-body units have an upper air outlet and a front air intake. The fan coil units can be installed either on the floor or on the wall, or concealed. Casing mod. SVR mod. CH The inner frame is made of galvanized steel. The casing is made of sheet steel and painted with oven-dried epoxy powders, available in all RAL colors. The access doors and grilles are made of white heat-resistant ABS and can be turned into all four directions. Models Dimensions and weight Model: CVR 110 112 114 216 218 A 555 680 805 930 1055 B 395 395 395 395 395 C 230 230 230 230 Dimensions230 (mm) and weight CVR Dimensions (mm) and weight for CV - CV/AF - CH - CH/AF kg 9 11 14 16 19 110 112 114 216 218 110 112 114 216 218 220 222 224 226 228 A 555 680 805 930 1055 CV - CH B 395 395 395 395 395 A 555 680 805 930 1055 1180 1180 1430 1430 1680 Model: SVR C 230 230 230 230 230 CV/AF -CH/AF Kg 9 11 14 16 19 110 112 114 216 218 A 574 699 824 949 1074 1199 1199 1449 1449 1699 HYDRAULIC CONNECTION 1/2” G F CV - CV/AF - CH - CH/AF A 648 773 898 1023 1148 B 505 505 505 505 505 581 581 581 581 581 B 430 430 430 430 Dimensions430 (mm) and weight SVR C 215 215 215 215 215 245 245 245 245 245 C 254 254 254 254 254 Kg 10 13 16 19 22 29 31 38 38 42 kg 15 17 22 23 26110 112 114 216 218 HYDRAULIC CONNECTION 1/2” G F A 648 773 898 1023 1148 B 430 430 430 430 430 C 254 254 254 254 254 Kg 15 17 22 23 26 HYDRAULIC CONNECTION 1/2” G F Alternatives available on request.
Load more

Recommended publications
  • Installation, Start-Up and Service Instructions
    42C,D,S,V Series Fan Coil Air Conditioners Installation, Start-Up and Service Instructions CONTENTS Page Page SAFETY CONSIDERATIONS . 1 APPENDIX A — POTENTIOMETER ADJUSTMENT. 83 INTRODUCTION . .1,2 APPENDIX B — EVO/ECM 4-SPEED PHYSICAL DATA . 2-4 ADJUSTMENT. 84 PRE-INSTALLATION. 4-42 START-UP CHECKLIST FOR 42C,D,S,V SERIES Unpack and Inspect Units . 4 FAN COIL AIR CONDITIONERS. .CL-1, CL-2 Protect Units From Damage . 4 Prepare Jobsite for Unit Installation. 4 Identify and Prepare Units. 4 SAFETY CONSIDERATIONS INSTALLATION . 42-79 Installation of this unit can be hazardous due to electrical com- Step 1 — Place Units in Position . 42 ponents and equipment location (such as a ceiling or elevated • 42C UNITS structure). Only trained, qualified installers and service • 42V UNITS mechanics should install and service this equipment. • 42D UNITS When installing this unit, observe precautions in the literature, • 42S UNITS labels attached to the equipment, and any other safety precau- Step 2 — Make Piping Connections . 53 tions that apply. • VALVE PACKAGES • Follow all safety codes. • 42C,D,V DRAIN CONNECTIONS • Wear safety glasses and work gloves. Never wear bulky • 42C,D,V WATER SUPPLY/RETURN or loose fitting clothing when working on any mechani- CONNECTIONS cal equipment. Gloves should be worn for proper protec- • 42C,D,V STEAM CONNECTIONS tion against heat and other possible injuries. Safety • 42C,D,V DIRECT EXPANSION (DX) REFRIGERANT glasses or goggles should always be worn when drilling, PIPING cutting, or working with chemicals such as refrigerants • TEST AND INSULATE or lubricants. Step 3 — Make Electrical Connections . 66 • Use care in handling and installing this unit.
    [Show full text]
  • BIM Standards for Project Records
    Last updated: Dec 2, 2020 BIM Standards for Project Records A. Overview 1. Intent The intention of this guide is to represent all the standards Xavier University has adopted for BIM. All architect and engineers developing BIM for XU should follow the standards within. XU has adopted BIM as a tool for project development as well as record documentation and facility management. Strict adherence to these standards will allow for the integration of BIM with Physical Plant facility management tools. 2. Building Information Modeling (BIM) BIM is a process involving the generation and management of digital representations of physical and functional characteristics of buildings. XU has adopted Revit as the primary tool for BIM generation. Revit files contain mass amounts of building data that can be integrated with other FM tools to support management of a building asset. At the initiation of a project, the University Project Manager will collaborate with the project A/E firms to establish a BIM execution plan with defined document deliverables. Project documentation required for assessment, review, bidding, construction, and as-built turnover is required to use Revit as the base model. Any exceptions to this rule require advanced approval by the XU project manager. 3. Getting Started Existing Buildings Revit current condition models exist for most of Xavier University’s buildings and site plans. Before developing a new model, consultants should request a building’s base file from the University Architect. New construction plans should be developed in this base model. For buildings that do not have an existing Revit base file, a new one should be created.
    [Show full text]
  • Optiline™ Vertical Stack Fan Coil
    Installation, Operation and Maintenance IM 1272-2 Group: Fan Coils Part Number: 910243712 Date: June 2019 OptiLine™ Vertical Stack Fan Coil Model FSG Table of Contents Table of Contents Introduction . 3 Troubleshooting . 13 General . .3 Startup Check List . 14 Safety Information ............................3 Wiring Diagrams . 15 Design and Take-off Precautions . 4 Addendum . 19 Receiving Inspection ..........................4 Programmable Digital On–Off Valve and Modulating Fan Control Thermostats ............19 Installation . 5 Installation of Units with Risers Attached ..........5 Installation .................................20 Operation .................................21 Maintenance . 10 Control Actions . .26 Operating Instructions . 11 Standard Thermostat Digital Programmable Fan Controls ...............................27 Thermostat ...............................11 Special Notes . 27 Adjusting the Maximum CFM ..................11 Engineer Mode Operation .....................28 Sequence of Operation .......................12 IM 1272-2 • OPTILINE VERTICAL FAN COILS 2 www.DaikinApplied.com Introduction Introduction General Safety Information CAUTION NOTICE Sharp edges and coil surfaces are a potential injury hazard. Avoid contact The manufacturer’s warranty does not cover any damage or defect to with them. the air conditioner caused by the attachment or use of any components, accessories or devices (other than those authorized by the manufacturer) This manual contains the installation and operating instructions into, onto, or in conjunction with the air conditioner. you should be aware for your an coil system. There are some precautions that that the use of unauthorized components, accessories or devices may should be taken to derive maximum satisfaction from it. adversely affect the operation of the air conditioner and may also endanger Improper installation can result in unsatisfactory operation or life and property. The manufacturer disclaims any responsibility for such dangerous conditions.
    [Show full text]
  • Product Data INDUSTRY LEADING FEATURES / BENEFITS
    40MB*C / 38MAQ Cassette Ductless Split System Sizes 09 to 18 Product Data INDUSTRY LEADING FEATURES / BENEFITS A PERFECT BALANCE BETWEEN BUDGET LIMITS, ENERGY SAVINGS AND COMFORT. The 38/40MB*C series ductless split systems are a matched combination of an outdoor condensing unit and an indoor fan coil unit connected only by refrigerant tubing and wires. The in- ceiling cassette fan coils are ideal for retrofit or modernization projects where a false ceiling is available. This selection of fan coils permits inexpensive and creative solutions to design problems such as: S Add- ons to current space (an office or family room addition) S Special space requirements S When changes in the load cannot be handled by the existing system. S When adding air conditioning to spaces that are heated by hydronic or electric heat and have no ductwork. S Historical renovations or any application where preserving the look of the original structure is essential. The ideal compliment to your ducted system when it is impractical or prohibitively expensive to use ductwork. These compact indoor fan coil units take up very little space in the room and do not obstruct windows. The fan coils are attractively styled to blend with most room decors. Advanced system components incorporate innovative technology to provide reliable cooling performance at low sound levels. LOW SOUND LEVELS BUILT- IN RELIABILITY When noise is a concern, the ductless split systems are the answer. Ductless split system indoor and outdoor units are designed to The indoor units are whisper quiet. There are no compressors provide years of trouble- free operation.
    [Show full text]
  • Air and Water Flowrate Optimisation for a Fan Coil Unit in Heat Pump Systems Edwards Kilian [email protected]
    Purdue University Purdue e-Pubs International High Performance Buildings School of Mechanical Engineering Conference 2012 Air and Water Flowrate Optimisation for a Fan Coil Unit in Heat Pump Systems Edwards Kilian [email protected] Donal P. Finn Follow this and additional works at: http://docs.lib.purdue.edu/ihpbc Kilian, Edwards and Finn, Donal P., "Air and Water Flowrate Optimisation for a Fan Coil Unit in Heat Pump Systems" (2012). International High Performance Buildings Conference. Paper 80. http://docs.lib.purdue.edu/ihpbc/80 This document has been made available through Purdue e-Pubs, a service of the Purdue University Libraries. Please contact [email protected] for additional information. Complete proceedings may be acquired in print and on CD-ROM directly from the Ray W. Herrick Laboratories at https://engineering.purdue.edu/ Herrick/Events/orderlit.html 3497, Page 1 Air and Water Flow Rate Optimisation for a Fan Coil Unit in Heat Pump Applications Kilian C. EDWARDS1* and Donal P. FINN2 1School of Mechanical & Materials Engineering, University College Dublin, Dublin, Ireland. Tel: + 353 1 716 1759 Fax: +353 1 283 0534 Email: [email protected] 2School of Mechanical & Materials Engineering, University College Dublin, Dublin, Ireland. Tel: + 353 1 716 1947 Fax: +353 1 283 0534 Email: [email protected] *Corresponding author ABSTRACT The degradation in efficiency of auxiliary components in heating/cooling systems when operating at part load is frequently reported. Through the use of variable speed components, the supplied capacity can be reduced to match the required load and hence reduce unnecessary energy consumption. However, for fan coil units, difficulties can arise when optimizing fan and pump speeds at part load.
    [Show full text]
  • AHRI Standard 441 (SI/2019): Performance Rating of Fan-Coil Units
    AHRI Standard 441 (SI) 2019 Standard for Performance Rating of Fan-coil Units IMPORTANT SAFETY DISCLAIMER AHRI does not set safety standards and does not certify or guarantee the safety of any products, components or systems designed, tested, rated, installed or operated in accordance with this standard/guideline. It is strongly recommended that products be designed, constructed, assembled, installed and operated in accordance with nationally recognized safety standards and code requirements appropriate for products covered by this standard/guideline. AHRI uses its best efforts to develop standards/guidelines employing state-of-the-art and accepted industry practices. AHRI does not certify or guarantee that any tests conducted under its standards/guidelines will be non-hazardous or free from risk. Note: This is a new standard. For I-P ratings, see AHRI Standard 440 (I-P)-2019. Price $10.00 (M) $20.00 (NM) ©Copyright 2019, by Air-Conditioning, Heating, and Refrigeration Institute Printed in U.S.A. Registered United States Patent and Trademark Office TABLE OF CONTENTS SECTION PAGE Section 1. Purpose ...............................................................................................................1 Section 2. Scope ..................................................................................................................1 Section 3. Definitions ..........................................................................................................1 Section 4. Test Requirements ..............................................................................................3
    [Show full text]
  • Smart Buildings: a Deeper Dive Into Market Segments
    Smart Buildings: A Deeper Dive into Market Segments Christopher Perry December 2017 Report A1703 © American Council for an Energy-Efficient Economy 529 14th Street NW, Suite 600, Washington, DC 20045 Phone: (202) 507-4000 • Twitter: @ACEEEDC Facebook.com/myACEEE • aceee.org SMART BUILDINGS © ACEEE Contents About the Author ............................................................................................................................... iv Acknowledgments .............................................................................................................................. iv Executive Summary ............................................................................................................................ v Introduction .......................................................................................................................................... 1 Methodology and Scope ..................................................................................................................... 2 Commercial Buildings Sector............................................................................................................. 3 Class B Offices ...................................................................................................................................... 7 Smart Technology Opportunities .......................................................................................... 9 HVAC ............................................................................................................................
    [Show full text]
  • Unitrane Fan-Coil As an • the Random Start-Up Feature Helps Being Placed on Top of the Units
    UniTrane® Fan-Coil Air Terminal Devices Horizontal, Vertical, and Low Vertical Sizes 02-12 Basic Series Fan-Coil, Sizes 04-08 March 2002 UNT-PRC001-EN It isn’t just a fan and a coil… The Trane Company has redesigned the traditional fan-coil to lead the industry in: • indoor air quality (IAQ) features • easy installation and maintenance • high quality and durability • advanced controls Factory assembled, Smaller unit footprint installed and tested piping package with IAQ drain pan to collect condensate Factory installed Two, three or and tested controls Quiet operation four-row coils Removable, noncorrosive, positively-sloped drain pan that’s easy to clean Easy to remove fan assembly Cleanable closed- cell insulation (non- 16-gage steel construction fiberglass) Easy filter access without front panel Damper allows up removal to 100% fresh air ©2002 American Standard Inc. UNT-PRC001-EN Contents Basic UniTrane Introduction 2 Features and Benefits 64 4 Selection Procedure 65 5 Model Number Description 65 5 General Data 66 12 Performance Data 67 18 Two-Pipe Coils 67 19 Four-Pipe Coils 68 22 Hot Water Reheat Coils 25 Steam Reheat Coils 28 Controls 69 31 Electrical Data 70 39 Dimensions and Weights 72 42 Mechanical Specifications 75 58 Options 60 UNT-PRC001-EN 3 Features and Benefits The UniTrane® fan-coil meets the • Controls are wired with a 24 VAC • Fan motors are available for either high standards of today’s market, as well as transformer to keep only a single static (0.4-inch external static pressure) the anticipated needs of tomorrow’s source power connection requirement or free discharge applications.
    [Show full text]
  • Mechanical, Plumbing, and Fire Protection Conditions
    KJWW Draft Condition Assessment Report Mechanical, Plumbing, and Fire Protection Conditions Mechanical Conditions The mechanical systems within the building consist of a combination of the original 1926 systems and renovations that occurred in 1979. The majority of the existing mechanical systems are nearing the end of their useful life, and are in need of replacement. For the purpose of this report, the mechanical system reviewed were heating, ventilating and air conditioning (HVAC), plumbing, and fire protection. The major issues with the existing building are the lack of code required ventilation air and a fire protection system that is well below the current code requirement for this type of building. The following is a detailed review of each system and the current deficiencies within the building. Heating, Ventilation and Air Conditioning The heating system for the building consists of two gas-fired steam boilers located in the lower level mechanical room. One, ___MBH, boiler is original to the building and the other boiler, ___MBH, was installed during the 1979 renovation. Both boilers are currently operating, however, are nearing the end of their usable life. The chilled water system consist of one, ___ton, water-cooled chiller (CH-1) located in the mechanical room. There is also a heat reclaim chiller (CH-2), which rejects heat from the chilled water system to a hot water storage tank located in the same lower level mechanical room. Both chillers were installed during the 1979 renovation, and are nearing the end of their usable life. Figure * below shows significant rust and age degradation to the header of each chiller.
    [Show full text]
  • Fan Coil Units High Induction Slot Diffusers
    Design Bureau Fan Coil System Solutions A Design Bureau The Trox Design Bureau has a reputation for developing solutions to satisfy the most challenging Architectural and Building Service applications around the globe. The Bureau draws on over 50 years of experience within construction, offering professionals the opportunity to compliment their project with optimised solutions. The Design Bureau service has been successfully employed for: Fan Coil & Diffuser Systems Multi-Service Chilled Beams Integrated Ceiling Design Architectural Air Distribution Decentralised Ventilation IT Cooling Systems Labcontrol 02 Collaborative Design Process 1)Initial Briefing 3)Detailed Design 5)Design Approval & Guarantee Key design criteria are established such Latest technology is harnessed to produce Witness testing and inspection to client’s as: schedules of optimised Fan Coil and satisfaction, to form the basis of the Heat gains and losses Diffuser options with emphasis on: Design Bureau Guarantee. Analysis to Budget and programme ‘System’ noise level include: Space planning and flexibility ‘System’ pressure losses Performance Airside or waterside control Air distribution Aesthetics Design conditions Installation and buildability 4)Testing and Refinement 2)Outline Proposals Thorough testing is conducted in a 6)Contract Implementation A range of solutions are developed dedicated Fan Coil and Diffuser mock-up Implementation and control to stringent covering: test cell. All aspects are considered manufacturing and Fan coil and diffuser options including: delivery schedules guarantee that Budget costs Thermodynamics programme and cost certainty are realised Potential savings Aerodynamics for the client. Acoustics User comfort 03 Design Bureau System Engineering Complete Solution The Design Bureau has developed a selection computer programme that selects the fan coil unit, the diffuser and plenum box.
    [Show full text]
  • Vertical Ahu Installation Manual
    VERTICAL AHU INSTALLATION MANUAL BULLETIN 30-015 TABLE OF CONTENTS INTRODUCTION ........................................................................................................................................... 3 MOUNTING ................................................................................................................................................... 5 LOCATION ..................................................................................................................................................... 5 DUCT CONNECTION ................................................................................................................................... 6 AIR FILTRATION .......................................................................................................................................... 7 PIPING ............................................................................................................................................................ 8 SEQUENCE OF OPERATION .................................................................................................................... 13 CHECKING AIRFLOW ............................................................................................................................... 14 CHARGING A COOLING SYSTEM .......................................................................................................... 14 CHARGING A HEAT PUMP SYSTEM .....................................................................................................
    [Show full text]
  • Ab137886464511en-040401.Pdf
    Hydronic applications Hydronic Commercial Application guide Hydronic applications Hydronic How to design Residential balancing and control solutions for energy efficient hydronic applications in residential and commercial buildings Mixing loop AHU application AHU heating 44 applications with detailed descriptions about the investment, design, construction and control AHU application AHU cooling Chillers applications Boilers applications Hot water hbc.danfoss.com 1 Content structure in this guide 1. Hydronic applications 2. Mixing loop 7. Glossary and abbreviations 1.1 Commercial 3. AHU applications 8. Control and valve theory 1.1.1 Variable flow 3.1 AHU applications heating 1.1.2 Constant flow 9. Energy efficiency analyses 3.2 AHU applications cooling 1.2 Residential 10. Product overview 4. Chillers applications 1.2.1 Two-pipe system 1.2.2 One-pipe system 5. Boiler applications 1.2.3 Heating – special application 6. Hot water applications Typical page shows you: Recommendation Type of solution Chapter Schematic drawing Application General system description Danfoss products Performance indicators Application details 2 Introduction Notes Designing HVAC systems is not that simple. Many factors need to be considered before making the final decision about the heat- and/or cooling load, which terminal units to use, how to generate heating or cooling and a hundred other things. This application guide is developed to help you make some of these decisions by showing the consequences of certain choices. For example, it could be tempting to go for the lowest initial cost (CAPEX) but often there would be compromises on other factors, like the energy consumption or the Indoor Air Quality (IAQ).
    [Show full text]