Full Shade Owner’S Manual

Fusion Series | Full Shade Owner’s Manual

Weatherproof Televisions IMPORTANT: Please read this owners manual before starting or operating the equipment.

4K 2160P2160P

Dear SkyVue Customer,

Congratulations on purchasing your new outdoor weather-proof television. We welcome you to our SkyVue family. To gain the full potential of your new SkyVue Outdoor Television, please read carefully the instructions within this document. There is a wealth of relevant information to get started and fully utilize all of the unique capabilities of your new SkyVue Outdoor Television. We sincerely thank you for your purchase and hope you have several years of enjoyment from your new SkyVue Outdoor Television.

We at SkyVue have taken a studied approach to delivering the highest quality and reliable outdoor television on the market. SkyVue started with the goals of operating with unparalleled customer service and extensive research and development. Upon extensive research of national competition, we realized that yet, all outdoor television manufacturers purchase the circuitry and panels in their products overseas; that SkyVue is the only manufacturer that completes its designs with all American Made products. Our family of televisions are re-innovating the ideas, functions, and technologies, in which other outdoor television manufacturers seemed to have missed. We take pride in every product and are glad to have you as part of our family.

Customer Service can be directly reached at: 1-(877) 4-SkyVue 1-(877) 475-9883 [email protected]

To inquire about extended warranty information, accessories, or installation FAQs please visit our website www.skyvue.com.

We Thank You for Your Support,

The SkyVue Management Team

Table of Contents

TV Models...... 5 TV Location and Placement...... 6 Safety Information...... 7 General Information...... 11 Rear Panel Connections...... 11 Wall Mounting...... 14 Remote Control Guide...... 16 On Screen Menu & Settings ...... 18 Picture Settings...... 20 Audio Settings ...... 29 Network Settings...... 30 Timer Settings ...... 33 Channel Setup ...... 34 Listening To Alternate Audio...... 35 Parental Controls ...... 36 Setting Up Closed Captioning ...... 38 Renaming Devices...... 40 Changing The Tv Settings...... 41 Accessibility Settings...... 44 Reset & Admin Menu...... 45 First time Setup / Setup After Factory Reset...... 46 SmartCast TV™...... 49 Playing USB Media...... 50 Help / Troubleshooting ...... 53 Regulatory Information...... 56 Legal Information ...... 58

Operator’s Manual - Model FSN Table of Contents | 3

TV Models Fusion - Full Shade

Built for shaded areas that will not experience any exposure to sunlight.

400 Nit Fusion 43” 50” 55” TV’s

SKYVUE FUSION Location of Manual Controls Panel

400 Nit Fusion 65” 70” 75” TV’s

Location of SKYVUE FUSION Manual Controls Panel

Owner’s Manual - Model FSN Important Information | 5 TV Placment & Location Locations for the TV - Full Shade

Important: The TV must be installed at least 5 feet from pool, spa, or other body of water. The Fusion shade TV models should NEVER be installed in an area where they will be exposed to DIRECT or PARTIAL SUNLIGHT. Recommended placement is in an area where the TV is shaded completely at all times by structures, or under a patio cover or gazebo. Remember that the position of the sun changes during the day.

Mounting Placment / Orientation

All Skyvue Landscape TV models should be installed so that the television is in a landscape orientation. Mounting the television incorrectly may cause damage to the television over time and will void the manufacturers warranty. The figure below displays the correct orientation.

To get the most out of your new SkyVue product, read these instructions before using your product and retain them for future reference. Prior to installation (this includes optional speaker bar, mounting arms, or any cables); plug TV into wall, power on, and inspect for damage. Manufacturer recommended application is Full shade.

When you see this symbol, please read the accompanying important warning or notice. It is intended to alert you to the presence of important operating instructions.

Safety & Certification When you see this symbol, please read the accompanying helpful tip.

THANK YOU FOR CHOOSING SkyVue IMPORTANT SAFETY INSTRUCTIONS • Unplug this apparatus during lightning storms or when unused for long periods of time. YourIMPORTANT TV is designed and SAFETY manufactured INSTRUCTIONS to operate within defined • A distance of at least three feet should be maintained between design limits. Misuse may result in electric shock or fire. To prevent your TV and any heat source, such as a radiator, heater, oven, To get the most out of your new SkyVue product, read these instructions your TV from being damaged, the following instructions should be Your TV is designed and manufactured to operate within definedamplifier etc.design Do not limits. install yourMisuse TV close may to smoke.result Operatingin electric before using your product and retain them for future reference. observed for the installation, use, and maintenance of your TV. Read your TV close to smoke or moisture may cause fire or electric Prior to installation (this includes optional speaker bar, mounting arms, theshock following or safety fire. instructions To prevent before your operating TV from your TV.being Keep damaged,these the following instructions should be observed for the Safety & Certification shock. or any cables); plug TV into wall power on and inspect for damage. instructionsinstallation, in a safe use, place and for future maintenance reference. of your TV. Read the following safety instructions before operating your • Slots and openings in the back and bottom of the cabinet • To reduce the risk of electric shock or component damage, TV. Keep these instructions in a safe place for future reference.are provided for ventilation. To ensure reliable operation of switch off the power before connecting other components to your TV and to protect it from overheating, be sure these your TV. openings are not blocked or covered. Do not place your TV in a THANK YOU FOR CHOOSING SkyVue IMPORTANT• Read SAFETY these instructions. INSTRUCTIONS • Unplugbookcase this apparatus or cabinet during unless lightning proper ventilation storms or whenis provided. unused for long periods of time. • Keep these instructions. • Never push any object into the slots and openings on your TV Your TV is designed and manufactured to operate within defined • A distancecabinet. of Do at not least place three any feet objects should on be the maintained top of your between TV. Doing design •limits. Heed Misuse all warnings. may result in electric shock or fire. To prevent yourso TV could and shortany heat circuit source, parts such causing as a a radiator, fire or electricheater, shock.oven, To get the most out of your new SkyVue product, read these instructions your TV from being damaged, the following instructions should be • Follow all instructions. amplifierNever spilletc. liquidsDo not installon your your TV. TV close to smoke. Operating before using your product and retain them for future reference. observed for the installation, use, and maintenance of your TV. Read • Do not use this apparatus near water. your TV close to smoke or moisture may cause fire or electric Prior to installation (this includes optional speaker bar, mounting arms, the following safety instructions before operating your TV. Keep these • Your TV should be operated only from the type of power shock. or any cables); plug TV into wall power on and inspect for damage. instructions• Clean in a onlysafe withplace dry for cloth. future reference. source indicated on the label. If you are not sure of the type • Slotsof andpower openings supplied in tothe your back home, and bottom consult of your the dealercabinet or local • •To reduceDo not theblock risk any of ventilationelectric shock openings. or component Install in damage, accordance arepower provided company. for ventilation. To ensure reliable operation of switchwith off the the manufacturer’s power before instructions. connecting other components to your TV and to protect it from overheating, be sure these When you see this symbol, please read the your TV. • Do not apply pressure or throw objects at your TV. This may • Do not install near any heat sources such as radiators, heat openings are not blocked or covered. Do not place your TV in a accompanying important warning or notice. It is compromise the integrity of the TV. The manufacturer’s • Readregisters, these instructions. stoves, or other apparatus (including amplifiers) that bookcase or cabinet unless proper ventilation is provided. intended to alert you to the presence of important produce heat. warranty does not cover user abuse or improper installations. • Keep these instructions. • Never push any object into the slots and openings on your TV operating instructions. • The power cord must be replaced when using different voltage • Do not defeat the safety purpose of the polarized or cabinet. Do not place any objects on the top of your TV. Doing • Heed all warnings. than the voltage specified. For more information, contact your grounding-type plug. A polarized plug has two blades with one so could short circuit parts causing a fire or electric shock. dealer. • Followwider all thaninstructions. the other. A grounding type plug has two blades Never spill liquids on your TV. and a third grounding prong. The wide blade or the third • When connected to a power outlet, power is always flowing • Do not use this apparatus near water. • Your TV should be operated only from the type of power When you see this symbol, please read the prong are provided for your safety. If the provided plug does into your TV. To totally disconnect power, unplug the power • Clean only with dry cloth. source indicated on the label. If you are not sure of the type accompanying helpful tip. not fit into your outlet, consult an electrician for replacement of power supplied to your home, consult your dealer or local • Do ofnot the block obsolete any ventilation outlet. openings. Install in accordance with the manufacturer’s instructions. power company. • Protect the power cord from being walked on or pinched When you see this symbol, please read the • Do not apply pressure or throw objects at your TV. This may • Do particularlynot install near at plugs, any heat convenience sources such receptacles, as radiators, and the heat point accompanying important warning or notice. It is compromise the integrity of the TV. The manufacturer’s registers,where stoves,they exit or from other the apparatus apparatus. (including amplifiers) that intended to alert you to the presence of important produce heat. warranty does not cover user abuse or improper installations. • Only use attachments/accessories specified by the operating instructions. • The power cord must be replaced when using different voltage • Do manufacturer.not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one than the voltage specified. For more information, contact your • Use only with the cart, stand, tripod, bracket, or table specified wider than the other. A grounding type plug has two blades dealer. by the manufacturer, or sold with the apparatus. When and a third grounding prong. The wide blade or the third • When connected to a power outlet, power is always flowing a cart is used, use caution when moving the cart/ When you see this symbol, please read the prong are provided for your safety. If the provided plug does into your TV. To totally disconnect power, unplug the power apparatus combination to avoid injury from tip-over. accompanying helpful tip. not fit into your outlet, consult an electrician for replacement ii of the obsolete outlet. • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Owner’sOnly use attachments/accessories Manual - Model specifiedFSN by the Important Information | 7 manufacturer. • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. ii cord. • Follow instructions for moving your TV. Ensure that the power become accustomed to the sound level, which may result • The lightning flash with arrowhead symbol within an cord and any other cables are unplugged before moving your in permanent damage to hearing without any noticeable equilateral triangle is intended to alert the user to the TV. discomfort. presence of un-isolated, dangerous voltage within the h • To prevent injury, this apparatus must be securely attached to • Install the TV where it cannot be pulled, pushed or knocked inside of your TV that may be of sufficient magnitude the floor/wall in accordance with the installation instructions. over. to constitute a risk of electric shock to persons. • When unplugging your TV, hold the AC/DC power adapter, not • Do not allow children to hang onto the product. • Do not overload power strips and extension cords. the cord. Pulling on the power cord may damage the wires • Store the accessories (remote, batteries, etc.) in a location Overloading can result in fire or electric shock. inside the cord and cause fire or electric shock. When your TV safely out of the reach of children. • The wall socket should be installed near your TV and easily will not be used for an extended period of time, unplug the power cord. • The American Academy of Pediatrics discourages accessible. television viewing for children younger than two • Only power of the marked voltage can be used for your TV. • To reduce risk of electric shock, do not touch the connector years of age. with wet hands. Any other voltage than the specified voltage may cause fire or • WARNING: Never place a television set in an electric shock. • Insert batteries in accordance with instructions. Incorrect unstable location. A television set may fall, causing • Do not touch the power cord during lightning. To avoid electric polarities may cause the batteries to leak which can damage serious personal injury or death. shock, avoid handling the power cord during electrical storms. the remote control or injure the operator. Do not expose batteries to excessive heat such as sunshine, fire or the like. • Many injuries, particularly to children, can be avoided by • Unplug your TV during a lightning storm or when it will not be taking simple precautions such as: used for long period of time. This will protect your TV from • If any of the following occurs, contact the dealer: - The power cord fails or frays. • Using cabinets or stands recommended by the damage due to power surges. - Your TV is dropped or damaged in any way. manufacturer of the television set. • Do not attempt to repair or service your TV yourself. Opening - The performance of your TV changes substantially. • Only using furniture that can safely support the television or removing the back cover may expose you to high voltages, • This apparatus shall not be exposed to dripping or splashing set. electric shock, and other hazards. If repair is required, and no objects filled with liquids, such as vases, shall be • Ensuring the television set is not overhanging the edge of contact your dealer and refer all servicing to qualified service placed on the apparatus. personnel. the supporting furniture. • The mains plug or appliance coupler is used as the disconnect • Do not use your TV if any abnormality occurs. If any smoke or • Not placing the television set on tall furniture (for example, device, the disconnect device shall remain readily operable. odor becomes apparent, unplug the power cord and contact cupboards or bookcases) without anchoring both the IMPORTANTyour dealer immediately. SAFETY Do not try to INSTRUCTIONSrepair your TV yourself. (continued)• CAUTION: These servicing instructions are for use by qualified furniture and the television set to a suitable support. service personnel only. To reduce the risk of electric shock, • Avoid using dropped or damaged appliances. If your TV • Not placing the television set on cloth or other materials do not perform any servicing other than that contained in the is dropped and the housing is damaged, the internal that may be located between the television set and the cord. • operatingFollow instructions instructions for unless moving you your are TV. qualified Ensure tothat do the so. power become accustomed to the sound level, which may result components may function abnormally. Unplug the power cord supporting furniture. cord and any other cables are unplugged before moving your in permanent damage to hearing without any noticeable immediately• The lightning and flashcontact with your arrowhead dealer for symbol repair. Continuedwithin an use • The lightning flash with arrowhead symbol within an TV. • Educatingdiscomfort. children about the dangers of climbing on of yourequilateral TV may trianglecause fire is intended or electric to shock.alert the user to the equilateral triangle is intended to alert the user to the furniture to reach the television set or its controls. presence of un-isolated, dangerous voltage within the • presenceTo prevent of injury,uninsulated this apparatus DANGEROUS must VOLTAGE be securely within attached the to • Install the TV where it cannot be pulled, pushed or knocked • Do not install your TV in an area with heavy dust or high h h inside of your TV that may be of sufficient magnitude product’sthe floor/wall enclosure in accordance that may bewith of thesufficient installation magnitude instructions. to • If yourover. existing television set is being retained and relocated, humidity. Operating your TV in environments with heavy dust to constitute a risk of electric shock to persons. constitute a risk of electrical shock to persons. the same considerations as above should be applied. or high humidity may cause fire or electric shock. • When unplugging your TV, hold the AC/DC power adapter, not • Do not allow children to hang onto the product. • Do not overload power strips and extension cords. • WARNING:the cord. Pulling Exposure on the to loudpower sounds cord maycan damage yourthe wires hearing • WARNING: To prevent injury, this apparatus must be securely attached• Store tothe the accessories floor/wall (remote, in accordance batteries, with etc.) the ininstallation a location Overloading can result in fire or electric shock. causinginside the hearing cord andloss causeand tinnitus fire or (ringing electric orshock. buzzing When in theyour TV safely out of the reach of children. ears).will not With be continuedused for an exposure extended to period loud noises, of time, ears unplug may the instructions. • The wall socket should be installed near your TV and easily • The American Academy of Pediatrics discourages cord. • Follow instructions for moving your TV. Ensure that the power becomepower cord. accustomed to the sound level, which may result accessible. television viewing for children younger than two cord and any other cables are unplugged before moving your in permanent damage to hearing without any noticeable • The lightning flash with arrowhead symbol within an • Only power of the marked voltage can be used for your TV. • To reduce risk of electric shock, do not touch the connector years of age. equilateral triangle is intended to alert the user to the TV. discomfort.with wet hands. iii Any other voltage than the specified voltage may cause fire or • WARNING: Never place a television set in an presence of un-isolated, dangerous voltage within the • To prevent injury, this apparatus must be securely attached to • Install the TV where it cannot be pulled, pushed or knocked h electric shock. • Insert batteries in accordance with instructions. Incorrect unstable location. A television set may fall, causing inside of your TV that may be of sufficient magnitude the floor/wall in accordance with the installation instructions. over. • Do not touch the power cord during lightning. To avoid electric polarities may cause the batteries to leak which can damage serious personal injury or death. to constitute a risk of electric shock to persons. • When unplugging your TV, hold the AC/DC power adapter, not • Dothe not remote allow control children or to injure hang the onto operator. the product. Do not expose shock, avoid handling the power cord during electrical storms. • Many injuries, particularly to children, can be avoided by • Do not overload power strips and extension cords. the cord. Pulling on the power cord may damage the wires batteries to excessive heat such as sunshine, fire or the like. • Unplug your TV during a lightning storm or when it will not be • Store the accessories (remote, batteries, etc.) in a location taking simple precautions such as: Overloading can result in fire or electric shock. inside the cord and cause fire or electric shock. When your TV • safelyIf any outof the of thefollowing reach occurs,of children. contact the dealer: used for long period of time. This will protect your TV from • Using cabinets or stands recommended by the • The wall socket should be installed near your TV and easily will not be used for an extended period of time, unplug the - The power cord fails or frays. damage due to power surges. • The American - Your AcademyTV is dropped of Pediatrics or damaged discourages in any way. manufacturer of the television set. accessible. power cord. • Do not attempt to repair or service your TV yourself. Opening television - The viewing performance for children of youryounger TV changes than two substantially. • To reduce risk of electric shock, do not touch the connector • Only using furniture that can safely support the television • Only power of the marked voltage can be used for your TV. or removing the back cover may expose you to high voltages, years of age. with wet hands. • This apparatus shall not be exposed to dripping or splashing set. Any other voltage than the specified voltage may cause fire or electric shock, and other hazards. If repair is required, • WARNING: Never place a television set in an and no objects filled with liquids, such as vases, shall be • Ensuring the television set is not overhanging the edge of electric shock. • Insertcontact batteries your dealer in accordance and refer withall servicing instructions. to qualified Incorrect service unstable location. A television set may fall, causing placed on the apparatus. the supporting furniture. • Do not touch the power cord during lightning. To avoid electric polaritiespersonnel. may cause the batteries to leak which can damage serious personal injury or death. the remote control or injure the operator. Do not expose • The mains plug or appliance coupler is used as the disconnect • Not placing the television set on tall furniture (for example, shock, avoid handling the power cord during electrical storms. • Do not use your TV if any abnormality occurs. If any smoke or • Many injuries, particularly to children, can be avoided by batteries to excessive heat such as sunshine, fire or the like. device, the disconnect device shall remain readily operable. cupboards or bookcases) without anchoring both the • Unplug your TV during a lightning storm or when it will not be odor becomes apparent, unplug the power cord and contact taking simple precautions such as: • Ifyour any dealerof the followingimmediately. occurs, Do notcontact try to the repair dealer: your TV yourself. • CAUTION: These servicing instructions are for use by qualified furniture and the television set to a suitable support. used for long period of time. This will protect your TV from • Using cabinets or stands recommended by the - The power cord fails or frays. service personnel only. To reduce the risk of electric shock, • Not placing the television set on cloth or other materials damage due to power surges. • Avoid using - Your dropped TV is dropped or damaged or damaged appliances. in any If way.your TV manufacturer of the television set. do not perform any servicing other than that contained in the that may be located between the television set and the • Do not attempt to repair or service your TV yourself. Opening is dropped - The and performance the housing of is your damaged, TV changes the internal substantially. • Onlyoperating using furnitureinstructions that unless can safely you are support qualified the televisionto do so. supporting furniture. or removing the back cover may expose you to high voltages, components may function abnormally. Unplug the power cord • This apparatus shall not be exposed to dripping or splashing • set.The lightning flash with arrowhead symbol within an electric shock, and other hazards. If repair is required, immediately and contact your dealer for repair. Continued use • Educating children about the dangers of climbing on and no objects filled with liquids, such as vases, shall be equilateral triangle is intended to alert the user to the contact your dealer and refer all servicing to qualified service of your TV may cause fire or electric shock. • Ensuring the television set is not overhanging the edge of furniture to reach the television set or its controls. placed on the apparatus. presence of uninsulated DANGEROUS VOLTAGE within the personnel. • Do not install your TV in an area with heavy dust or high h the supporting furniture. product’s enclosure that may be of sufficient magnitude to • If your existing television set is being retained and relocated, • humidity.The mains Operating plug or yourappliance TV in couplerenvironments is used with as the heavy disconnect dust • Do not use your TV if any abnormality occurs. If any smoke or • Notconstitute placing athe risk television of electrical set onshock tall tofurniture persons. (for example, the same considerations as above should be applied. or device,high humidity the disconnect may cause device fire shall or electric remain shock. readily operable. cupboards or bookcases) without anchoring both the odor becomes apparent, unplug the power cord and contact • WARNING: To prevent injury, this apparatus must be securely • CAUTION: These servicing instructions are for use by qualified • furnitureWARNING: and Exposure the television to loud set sounds to a suitable can damage support. your hearing your dealer immediately. Do not try to repair your TV yourself. attached to the floor/wall in accordance with the installation service personnel only. To reduce the risk of electric shock, causing hearing loss and tinnitus (ringing or buzzing in the • Avoid using dropped or damaged appliances. If your TV • Not placing the television set on cloth or other materials instructions. cord. • Followdo not instructions perform any for servicingmoving your other TV. than Ensure that thatcontained the power in the becomeears). accustomed With continued to the exposure sound level,to loud which noises, may ears result may is dropped and the housing is damaged, the internal that may be located between the television set and the • The lightning flash with arrowhead symbol within an cordoperating and any instructions other cables unless are unplugged you are qualified before moving to do so.your in permanent damage to hearing without any noticeable components may function abnormally. Unplug the power cord supporting furniture. equilateral triangle is intended to alert the user to the TV. discomfort. immediately and contact your dealer for repair. Continued use • The lightning flash with arrowhead symbol within an presence of un-isolated, dangerous voltage within the h • To prevent injury, this apparatus must be securely attached to • • InstallEducating the TV children where it about cannot the be dangers pulled, pushedof climbing or knocked on iii of your TV may cause fire or electric shock. equilateral triangle is intended to alert the user to the furniture to reach the television set or its controls. inside of your TV that may be of sufficient magnitude thepresence floor/wall of inuninsulated accordance DANGEROUS with the installation VOLTAGE instructions. within the over. • Do not install your TV in an area with heavy dust or high h to constitute a risk of electric shock to persons. • Whenproduct’s unplugging enclosure your that TV, holdmay thebe of AC/DC sufficient power adapter,magnitude not to •• IfDo your not existing allow children television to hangset is ontobeing the retained product. and relocated, humidity. Operating your TV in environments with heavy dust • Do not overload power strips and extension cords. theconstitute cord. Pulling a risk on of the electrical power cordshock may to persons. damage the wires the same considerations as above should be applied. or high humidity may cause fire or electric shock. • Store the accessories (remote, batteries, etc.) in a location Overloading can result in fire or electric shock. • insideWARNING: the cord Exposure and cause to fireloud orsounds electric can shock. damage When your your hearing TV • WARNINGsafely out :of To the prevent reach injury,of children. this apparatus must be securely willcausing not be hearingused for loss an extendedand tinnitus period (ringing of time, or buzzing unplug in the the attached to the floor/wall in accordance with the installation • The wall socket should be installed near your TV and easily • The American Academy of Pediatrics discourages powerears). cord. With continued exposure to loud noises, ears may instructions. accessible. television viewing for children younger than two • Only power of the marked voltage can be used for your TV. • To reduce risk of electric shock, do not touch the connector years of age. Any other voltage than the specified voltage may cause fire or with wet hands. • WARNING: Never place a television set in an iii electric shock. • Insert batteries in accordance with instructions. Incorrect unstable location. A television set may fall, causing • Do not touch the power cord during lightning. To avoid electric polarities may cause the batteries to leak which can damage serious personal injury or death. shock, avoid handling the power cord during electrical storms. the remote control or injure the operator. Do not expose batteries to excessive heat such as sunshine, fire or the like. • Many injuries, particularly to children, can be avoided by • Unplug your TV during a lightning storm or when it will not be taking simple precautions such as: used for long period of time. This will protect your TV from • If any of the following occurs, contact the dealer: - The power cord fails or frays. • Using cabinets or stands recommended by the damage due to power surges. - Your TV is dropped or damaged in any way. manufacturer of the television set. • Do not attempt to repair or service your TV yourself. Opening - The performance of your TV changes substantially. • Only using furniture that can safely support the television or removing the back cover may expose you to high voltages, • This apparatus shall not be exposed to dripping or splashing set. electric shock, and other hazards. If repair is required, and no objects filled with liquids, such as vases, shall be • Ensuring the television set is not overhanging the edge of contact your dealer and refer all servicing to qualified service placed on the apparatus. personnel. the supporting furniture. • The mains plug or appliance coupler is used as the disconnect • Do not use your TV if any abnormality occurs. If any smoke or • Not placing the television set on tall furniture (for example, device, the disconnect device shall remain readily operable. odor becomes apparent, unplug the power cord and contact cupboards or bookcases) without anchoring both the your dealer immediately. Do not try to repair your TV yourself. • CAUTION: These servicing instructions are for use by qualified furniture and the television set to a suitable support. service personnel only. To reduce the risk of electric shock, • Avoid using dropped or damaged appliances. If your TV • Not placing the television set on cloth or other materials do not perform any servicing other than that contained in the is dropped and the housing is damaged, the internal that may be located between the television set and the operating instructions unless you are qualified to do so. components may function abnormally. Unplug the power cord supporting furniture. immediately and contact your dealer for repair. Continued use • The lightning flash with arrowhead symbol within an • Educating children about the dangers of climbing on of your TV may cause fire or electric shock. equilateral triangle is intended to alert the user to the furniture to reach the television set or its controls. presence of uninsulated DANGEROUS VOLTAGE within the • Do not install your TV in an area with heavy dust or high h product’s enclosure that may be of sufficient magnitude to • If your existing television set is being retained and relocated, humidity. Operating your TV in environments with heavy dust constitute a risk of electrical shock to persons. the same considerations as above should be applied. ® or high humidity may cause fire or electric shock. 8 All Rights Reserved. SkyVue • WARNING: Exposure to loud sounds can damage your hearing • WARNING: To prevent injury, this apparatus must be securely causing hearing loss and tinnitus (ringing or buzzing in the attached to the floor/wall in accordance with the installation ears). With continued exposure to loud noises, ears may instructions.

iii Television Antenna Connection Protection

If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges. Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements of the grounding electrode.

Lightning Protection For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system. Power Lines Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines or circuits. Remember, the screen of the coaxial cable is intended to be connected to earth in the building installation. TELEVISION ANTENNA CONNECTION PROTECTION

If an outside antenna/satellite dish or cable system is to be . connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges. Ground Clamp Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides Antenna Lead In Wire information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements of the grounding electrode.

Lightning Protection For added protection of the TV during a lightning storm or when it Antenna Discharge Unit is left unattended or unused for long periods of time, unplug the TV (NEC Section 810-20) from the wall outlet and disconnect the antenna or cable system.

Power Lines Do not locate the antenna near overhead light or power circuits, or Grounding Conductors where it could fall into such power lines or circuits. Remember, the screen of the coaxial cable is intended to be connected to earth in (NEC Section 810-21) the building installation. Ground Clamps

Power Service Grounding Electrode System Electric Service Equipment (NEC ART 250, part H)

Operator’s Manual - Model FSN Safety Information 9 For DTS patents, see http://patents.dts.com.For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS,Manufactured Inc. DTS, the under license from DTS, Inc. DTS, the Manufactured under license from DolbyManufactured Laboratories. under license from Dolby Laboratories. symbol, DTS and the Symbol together,symbol, and DTS DTS Studio and the Symbol together, and DTS Studio Dolby, Dolby Audio, and the double-DDolby, symbol Dolby areAudio, and the double-D symbol are Sound II are registered trademarks and/orSound trademarks II are registered trademarks and/or trademarks trademarks of Dolby Laboratories. trademarks of Dolby Laboratories. of DTS, Inc. in th United States and/orof other DTS, countries. Inc. in th United States and/or other countries. © DTS, Inc. All Rights Reserved. © DTS, Inc. All Rights Reserved.

This product qualifies for ENERGY This STAR product in the qualifies “factory for ENERGY STAR in the “factory default” settings and this is the settingdefault” in which settings power and this is the setting in which power savings will be achieved. Changing thesavings factory will default be achieved. Changing the factory default HDMI, the HDMI logo and High-DefinitionHDMI, the Multimedia HDMI logo and High-Definition Multimedia picture settings or enabling other featurespicture will settings increase or enabling other features will increase Interface are trademarks or registeredInterface trademarks are trademarksof or registered trademarks of power consumption that could exceed thepower limits consumption necessary that could exceed the limits necessary HDMI Licensing LLC. HDMI Licensing LLC. to qualify for ENERGY STAR rating. For moreto qualify information for ENERGY STAR rating. For more information on the ENERGY STAR program, refer to energystar.gov.on the ENERGY STAR program, refer to energystar.gov.

v v

WARNING: Do not connect the power source before making connections. Internal Component Source

The Internal Component Source allows you to easily connect to the Audio, Video, Digital Audio Out, HDMI, Audio Out, and RF connectors. 1. The Internal Component Source is inside the Component Cover located on the back of the unit. 2. Loosen the 6 thumbscrews located on the back cover of your SkyVue TV , and slide the cover toward the left to reveal the Component Source. 3. Route cables to the proper inputs, and place the cable cords over the Rubber Sealing Gasket. 4. Close the cover. 5. Press firmly on the cover, and tighten the thumbscrews.

Loosen Thumbscrews Tighten Thumbscrews CABLE PASSAGE

Manual Controls Panel The location of the manual control panel can be different for different model televisions. See pages 8 & 10 to locate the manual control panel for your television.

POWER Turn on the TV by pressing the button once. Press the button again to turn off the TV.

These buttons increase or decrease the volume. If a sub-menu is active, pressing these buttons will move the VOL+ / VOL- selection left or right. If the OSD is active, Vol+/Vol- is used to select the highlighted options.

This button switches between the different sources of the TV. When the On-Screen Display (OSD) is active, this INPUT button acts as the enter button and confirms the menu selection.

SKYVUE FUSION

Owner’s Manual - Model FSN Important Information | 11 Rear Panel Connections

Rear Panel Connections 43” & 55” TV’s AUDIO OUT 1. USB: Connect a USB thumb drive to play music or video.

HDMI 2 HDMI 1 DIGITAL AV AUDIO AV AUDIO TV ETHERNET (BEST) (APC) AUDIO OUT CABLE/SAT 2. Component: Connect a component. 1 (OPTICAL) (L) 2 (R) SINGAL 3

3. HDMI 3: Connect an HDMI device. COMPOSITE INPUT

AV INUSB Pb Pr AV AUDIO AV AUDIO HDMI 3 SIGNAL SIGNAL (L) (R) (BEST)

AUDIO OUT 4. HDMI 1 & 2: Connect an HDMI device.

HDMI 3 HDMI 2 HDMI 1 DIGITAL AV AUDIO AV AUDIO TV ETHERNET (BEST) (BEST) (APC) AUDIO OUT CABLE/SAT 5. Optical Audio Out: Connect to an optical audio device, such as home(OPTICAL) audio(L) receiver.(R) SINGAL

6. Audio Out: Connect to an RCA device, such as sound bar COMPOSITE INPUT

Connect to a coaxial cable from cable, satellite, or antenna.AV INUSB Pb Pr AV AUDIO AV AUDIO HDMI 4 7. Coaxial: SIGNAL SIGNAL (L) (R) (BEST) 8. Ethernet: Connect an Ethernet cable to modem/ router. 4 5 6 7 8 AUDIO OUT AUDIO OUT

HDMI 2 HDMI 1 DIGITAL AV AUDIO AV AUDIO TV ETHERNET (BEST) (APC) AUDIO OUT CABLE/SAT (OPTICAL) (L) (R) SINGAL HDMI 2 HDMI 1 DIGITAL AV AUDIO AV AUDIO TV ETHERNET (BEST) (APC) AUDIO OUT CABLE/SAT (OPTICAL) (L) (R) SINGAL

COMPONENT / COMPOSITE INPUT COMPOSITE INPUT

AV INUSB Pb Pr AV AUDIO AV AUDIO HDMI 3 SIGNAL SIGNAL (L) (R) (BEST) AV INUSB Pb Pr AV AUDIO AV AUDIO HDMI 3 SIGNAL SIGNAL (L) (R) (BEST) Rear Panel Connections 50” TV AUDIO OUT AUDIO OUT

HDMI 3 HDMI 2 HDMI 1 DIGITAL AV AUDIO AV AUDIO TV ETHERNET 1. USB: Connect a USB thumb drive to play music(BEST) or video.(BEST) (APC) AUDIO OUT CABLE/SAT (OPTICAL) (L) (R) SINGAL HDMI 3 HDMI 2 HDMI 1 DIGITAL AV AUDIO AV AUDIO TV ETHERNET (BEST) (BEST) (APC) AUDIO OUT CABLE/SAT (OPTICAL) (L) (R) SINGAL

2. HDMI 1, 2, & 3: Connect an HDMI device. COMPONENT / COMPOSITE INPUT COMPOSITE INPUT 3. Coaxial: Connect to a coaxial cable from cable, satellite, or antenna. AV INUSB Pb Pr AV AUDIO AV AUDIO HDMI 4 SIGNAL SIGNAL (L) (R) (BEST) 1 AV INUSB Pb Pr 2AV AUDIO AV AUDIO HDMI 4 3 SIGNAL SIGNAL (L) (R) (BEST)

USB HDMI 3 HDMI 2 HDMI 1 TV (ARC) CABLE/SAT SINGAL

AUDIO OUT 4. Audio Out: Connect to an RCA device, such as sound bar.

5. Ethernet: Connect an Ethernet cable to modem/router.

6. Component: Connect a component.

7. Optical Audio Out: Connect to an optical audio device,

such as a home audio receiver.

HDMI 2 HDMI 1 DIGITAL AV AUDIO AV AUDIO TV ETHERNET (BEST) (APC) AUDIO OUT CABLE/SAT Rear Panel Connections (OPTICAL) (L) (R) SINGAL COMPOSITE INPUT

AV INUSB Pb Pr AV AUDIO AV AUDIO HDMI 3 Rear Panel Connections 65” 70” 75” TV’s SIGNAL SIGNAL (L) (R) (BEST)

1. USB: Connect a USB thumb drive to play music or video. AUDIO OUT

2. Component: Connect a component. HDMI 3 HDMI 2 HDMI 1 DIGITAL AV AUDIO AV AUDIO TV ETHERNET (BEST) (BEST) (APC) AUDIO OUT CABLE/SAT 1 (OPTICAL) (L) 2 (R) SINGAL 3 3. HDMI 4: Connect an HDMI device. COMPOSITE INPUT

AV INUSB Pb Pr AV AUDIO AV AUDIO HDMI 4 SIGNAL SIGNAL (L) (R) (BEST)

4. HDMI 1, 2, & 3: Connect an HDMI device.

5. Optical Audio Out: Connect to an optical audio device, such as home audio receiver. AUDIO OUT 6. Audio Out: Connect to an RCA device, such as sound bar HDMI 2 HDMI 1 DIGITAL AV AUDIO AV AUDIO TV ETHERNET (BEST) (APC) AUDIO OUT CABLE/SAT (OPTICAL) (L) (R) SINGAL 7. Coaxial: Connect to a coaxial cable from cable, satellite, or antenna.

COMPOSITE INPUT 8. Ethernet: Connect an Ethernet cable to modem/ router.

AV INUSB Pb Pr AV AUDIO AV AUDIO HDMI 3 4 5 SIGNAL SIGNAL6 (L) (R) 7 (BEST)8

AUDIO OUT

HDMI 3 HDMI 2 HDMI 1 DIGITAL AV AUDIO AV AUDIO TV ETHERNET (BEST) (BEST) (APC) AUDIO OUT CABLE/SAT (OPTICAL) (L) (R) SINGAL

COMPOSITE INPUT

AV INUSB Pb Pr AV AUDIO AV AUDIO HDMI 4 SIGNAL SIGNAL (L) (R) (BEST)

Owner’s Manual - Model FSN Important Information | 13 Wall Mounting Information Wall-Mounting The Tv

To mount your TV on a wall, you will need a wall mount. Consult the information on this page to find the appropriate mount for your TV. Be sure the mount you choose is capable of supporting the weight of the TV. After you have determined that you have the correct mount for your TV, you can begin the installation. To install your TV on a wall: 1. Disconnect any cables connected to your TV. 2. Lay a blanket down on flat sturdy but soft surface. Run your hand over surface to make sure there are no sharp object or protrusions. Place the TV face-down. 3. Remove the screws. 4. Attach your TV and wall mount to the wall, carefully following the instructions that came 1 with your mount. Bracket rated for the weight/load of this TV.

Installing a TV on a wall requires lifting. To prevent injury or damage WALL-MOUNTING THE TV to the TV, we recommend two people or more for installation

To install your TV on a wall:

1. Disconnect any cables connected to your TV. 2. Place the TV face-down on a clean, flat, stable surface. Be sure the surface is clear of debris that can scratch or damage the TV. 3. Remove the stands by loosening and removing the screws. 4. Attach your TV and wall mount to the wall, carefully following the instructions that came with your mount. Use only with a UL-listed wall mount bracket rated for the weight/load of this TV.

Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you. Note: This image is included for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary according to the model.

FSN4318 FSN4318FSN5018 FSN5018FSN 5518 FSN55 20-4 FSN 6518 FSN6520-4FSN 7018 FSN7018 FSN 7518 FSN7518 Screw Size M6 M4 M6 M4 M6 M8 Screw Size: M6 M6 M6 M6 M8 M6 Hole Depth 29.6MM 20MM 14MM 22MM 12MM 24MM Hole Depth: 29.6 mm 20 mm 16 mm 12 mm 24 mm 20 mm 200mm x 200mm x 200mm x 400mm x 400mm x 400mm x Hole200 Pattern mm x 200 200 mm x 200 200 mm x 200 400 mm x 200 400 mm x 400 400 mm x 400 Hole Pattern: 200mm 200mm 200mm 200mm 400mm 400mm mm mm mm mm mm mm

WARNING: TV and AC receptacle must be installed at least 5 feet away from standing water, such as (but not limited to) a pool or spa. Please allow for additional clearance if TV is in use on a SkyVue Portable Cart.

Connect the power cord after you have made connections to your video equipment. Connect the power cord to an outdoor AC outlet that is in compliance with local regulations. Once the TV is installed it must remain plugged into a stable and consistent 120V, 60HZ power source at all times.

Ambient Light Sensor Power Indicator Light IR - Remote Sensor

Using The On-Screen Menu Navigating The On-ScreenYour Menu TV features an easy-to-use on-screen menu. NAVIGATING THE ON-SCREEN MENU CHANGING THE INPUT SOURCE To open the on-screen menu, press the Menu button on the remote. To open the on-screen menu, press External devices such as DVD players, Blu-ray Players, and video game Your TV features an easy-to-useFrom on-screen this menu, menu. you To opencan: the the Menu button on the remote. consoles can be connected to your TV. To use one of these devices on-screen menu, press the Menu button on the remote. with your TV, you must first change the input source using the Input • Adjust the Picture settings TV Settings Use the Arrow buttons to highlight menu. From this menu, you can: a menu option, and press the OK • Adjust the Audio settings Picture • Adjust the Picture settings button to select that option. To change the input sources: Audio • Adjust the Network settings • Adjust the Audio settings Network 1. Press the Input button on the remote. The Input menu is displayed. • Adjust the Network settings• Set up the Timers Timers 2. Use the Right/Left Arrow buttons or the Input button on the • Set up the Timers • Adjust the Channel settings Channels remote to highlight the input you wish to view and press OK. The CC Closed Captions selected input is displayed. • Adjust the Channel settings• Set up Closed Captioning Input Settings • Set up Closed Captioning • Name and adjust Inputs System • Name and adjust Inputs • Adjust TV settings User Manual • Adjust TV settings • View user manual • View user manual

Use the Arrow buttons to highlight a menu option, and press the OK button to select that option.

While navigating the on-screen menu, you can While navigating the on-screen menu, you can press the press the Back button at any time to return to the Back button at any time to return to the previous menu previous menu screen. The Exit button will close the on- screen. The Exit button will close the onscreen menu. screen menu.

= Back = Exit

Changing The Input Source

You can change the input names that appear on the External devices such as DVD players, Blu-ray Players, and video game consoles can be connected Input menu to make your devices easy to recognize. to your TV. To use one of these devices with your TV, you must first change the input source using the See Renaming Devices on the Input Menu for more Input menu. information. To change the input sources: 1. Press the Input button on the remote. The Input menu is displayed. 9 2. Use the Right/Left Arrow buttons or the Input button on the remote to highlight the input you wish to view and press OK. The selected input is displayed.

You can change the input names that appear on the Input menu to make your devices easy to recognize. See Renaming Devices on the Input Menu for more information.

Owner’s Manual - Model FSN On Screen Menu | Picture Settings | 17 Changing The Screen Aspect Ratio

The TV can display images in four different modes: Normal, Panoramic, Wide, and Zoom. Each mode displays the picture differently. Some programs have black bars on the top or sides of the picture so that the picture keeps its original shape. Examples include wide-screen movies and older television programs.

To change the screen aspect ratio: 1. Press the View Mode button on the remote. 2. Use the Arrow buttons to highlight the aspect ratio you wish to view and press OK.

• Normal preserves the content’s original aspect ratio and size. • Panoramic stretches a 4:3 aspect ratio picture to the left and right edges of the screen. The center of the image is not stretched, but the sides of the image are extremely stretched. If you are watching widescreen (1.85:1 or 2.35:1) content with black bars on the top and bottom, the black bars will still appear on the top and bottom of the display image. • Wide stretches a 4:3 aspect ratio picture to the edges of the screen. Since the picture is being stretched, the display image may appear distorted—figures appear short and fat. If the program is already formatted for widescreen viewing (1.85:1 or 2.35:1), then black bars will appear on the top and bottom of the display image. • Zoom expands images evenly in all directions (33% taller and 33% wider) with black bars to fit the screen. A 720p image will fill a 1080p screen.

Tip: The aspect ratio cannot be changed for Ultra HD content or HDR content.

18 All Rights Reserved. SkyVue® Adjusting The Picture Settings 3 Your TV can be adjusted to suit your preferences and viewing conditions. To adjust the picture settings: 1. Press the Menu button on the remote. The on-screen menu is displayed. ADJUSTING THE PICTURE SETTINGS 3. Use the Arrow buttons on the 4. To manually change each of the picture settings, use the Up/ 2. Use the Arrow buttons on the remoteremote to to highlight highlight Picture Picture and press OK. The PICTURE menu is Down Arrow buttons on the remote to highlight that picture Your TV can be adjusted to suit your preferencesdisplayed. and viewing Mode, then use the Left/Right setting, then use the Left/Right Arrow buttons to adjust the conditions. 3. Use the Arrow buttons on the remoteArrow tobuttons highlight to changePicture Mode,the then use the Left/Right Arrow setting: buttons to change the picture mode:picture mode: • Auto Brightness Control - The auto brightness control detects • Standard mode sets the the light levels in the room and automatically adjusts the If you save changes to the settings for a picture mode, an • Standard mode sets the picturepicture settings settings to tothe the Picture Back backlight for the best picture. Select Off, Low, Medium, or asterisk appears after its name (see Saving a Custom Picture default settings. default settings. High. Mode). Picture Mode Calibrated • Calibrated mode sets •the Calibratedpicture settings mode tosets the Auto Brightness Control Off • Backlight - Adjusts the LED brightness to affect the overall values ideal for watching TV inpicture a brightly-lit settings area. to values Backlight 90 brilliance of the picture. Backlight cannot be adjusted when ideal for watching TV in a starting from some picture modes. To adjust the picture settings: Brightness 50 • Calibrated Dark mode setsbrightly-lit the picture room. settings Contrast 50 • Brightness - Adjusts the black level of the picture. When this 1. Press the Menu button on the remote. The on-screento values menu ideal isfor watching TV in a dark area. • Calibrated Dark mode sets Color 50 setting is too low, the picture may be too dark to distinguish displayed. • Vivid mode sets the picture settingsthe picture to values settings that to values details. When this setting is too high, the picture may appear Tint 0 produce a brighter, more vividideal picture. for watching TV in a faded or washed out. 2. Use the Arrow buttons on the remote to highlight Picture and Sharpness 20 • Game mode reduces throughputdark room. delays and press OK. The PICTURE menu is displayed. More Picture • Contrast - Adjusts the white level of the picture. When this optimizes the picture settings• Vivid for displaying mode sets game the picture setting is too low, the picture may appear dark. When this Picture Mode Edit console output. settings to values that setting is too high, the picture may appear faded or washed If Standard picture mode meets Energy Star® requirements. For Color Calibration produce a brighter, more out. If the setting is too high or too low, detail may be difficult the best picture switch to Calibrated mode.• Note Computer that Calibrated mode optimizes the picture settings vivid picture. to distinguish in dark or bright areas of the picture. mode does not meet Energy Star® requirements.for displaying Customizing computer output. picture setting will change the energy consumption required to • Game mode reduces • Color - Adjusts the intensity of the picture colors. operate the TV. throughput delays and • Tint - Adjusts the hue of the picture. This setting is useful in 4. To manually change each of the pictureoptimizes settings, the use picture the Up/ settings Down Arrow buttons on the remote adjusting the flesh tones in the picture. If flesh appears too to highlight that picture setting, thenfor use displaying the Left/Right game consoleArrow buttons to adjust the setting: orange, reduce the level of color before adjusting tint. output. • Sharpness - Adjusts the edge sharpness of picture elements. • Computer mode optimizes the picture settings for It can be used to sharpen non-HD (high definition) content; • Auto Brightness Control - The auto brightness control detects the light levels in displaying computer output. however, it will not produce detail that does not otherwise the room and automatically adjusts the backlight for the best picture. Select Off, Low, exist. Medium, or High. • Backlight - Adjusts the LED brightness to affect the overall brilliance of the picture. 5. When you have finished adjusting the picture settings, press Backlight cannot be adjusted when starting from some picture modes. the Exit button on the remote. • Brightness - Adjusts the black level of the picture. When this setting is too low, the picture may be too dark to distinguish details. When this setting is too high, the picture may appear faded or washed out. • Contrast - Adjusts the white level of the picture. When this setting is too low, the picture may appear dark. When this setting is too high, the picture may appear faded or washed out. If the setting is too high or too low, detail may be difficult to distinguish in dark or bright areas of the picture. 11

Owner’s Manual - Model FSN On Screen Menu | Picture Settings | 19 Adjusting The Picture Settings (continued)

• Color - Adjusts the intensity of the picture colors. • Tint - Adjusts the hue of the picture. This setting is useful in adjusting the flesh tones in the picture. If flesh appears too orange, reduce the level of color before adjusting tint. • Sharpness - Adjusts the edge sharpness of picture elements. It can be used to sharpen non-HD (high definition) content; however, it will not produce detail that does not otherwise exist. 3

5. When you have finished adjusting the picture settings, press theExit button on the remote.

Adjusting More Picture Settings • Game Low Latency - elect On to reduce video delay (lag) Adjusting the Color Temperature Adjusting More Picture Settings To adjust more picture settings: when gaming. Adjusting the color temperature changes the white balance of the • Film Mode picture. To adjust more picture settings: 1. rom the PICTURE menu, use the More Picture Back Auto or . 1. From the PICTURE menu, useA therro wArrow butt onbuttonss to highligh to highlightt More To adjust the color temperature: Picture , and then press OK . Color Temperature Normal • Color Space - elect Color pace for the source. Video Color Temperature Back More Picture, and then press OK. sources uses YCbCr, but PC uses RB. 1. rom the MRE PICTURE menu, Black Detail O Normal 2. Use the Arrow buttons to2 .highlight Use th ethe Arro settingw butt youons twisho to use the Arrow buttons to Active Full Array ™ Low • Gamma - et the shape of the amma curve. Use lower Cool adjust, then press the Left/Righthighligh Arrowt tbuttonshe setting to changeyou wis hthe amma values for bright room conditions, and higher highlight Color Temperature , Clear Action O Computer setting: to adjust, then press the Left/ values when its dark. and then press OK . Right Arrow buttons to change Reduce Noise • Color Temperature - Seet hAdjustinge setting the: Color Temperature. Game Low Latency O 3. 2. Use the Arrow buttons on the Exit button on the remote. remote to highlight a color • Black Detail - Adjusts• theColor average Tempe brightnessrature - of the Film Mode On temperature preset and then picture to compensate for large areas of brightness. Select Color Space Auto ee Adjusting the Color press OK . Off, Low, Medium, or High. Temperature. Gamma 2.2 • Normal is optimized for Based• Bl aonck theDet content,ail - dynamically • Active Full Array ™ - Adjusts the television viewing. adjusts and balances the brightnessaverage and brigh thetn contrastess of t hratioe of the picture by locally adjustingpictu backlightre to com zones.pensate for • Cool produces a blue-hued large areas of brightness. picture. elect , Low , Medium , or • Computer optimizes the High . picture for use as a • Xtreme Black Engine™ - Based on the content, dynamically PC monitor. adjusts and balances the brightness and the contrast ratio 3. of the picture by locally adjusting backlight zones. press the Exit button on the remote. • Clear Action - Reduces blur in scenes with fast action but limtis the range for the Backlight setting. • Reduce Noise - Reduce Signal Noise - iminishes artifacts in the image caused by the digitizing of image motion content. elect , Low , Medium , or High . - Reduce Block Noise - Reduces pielation and , Low , Medium , or High .

12 Adjusting More Picture Settings (continued)

• Clear Action - Reduces blur in scenes with fast action but limtis the range for the Backlight setting. • Reduce Noise • Reduce Signal Noise - Diminishes artifacts in the image caused by the digitizing of image motion content. Select Off, Low, Medium, or High. • Reduce Block Noise - Reduces pixelation and distortion for mpeg files. Select Off, Low, Medium, or High. • Game Low Latency - Select On to reduce video delay (lag) when gaming. • Film Mode - Optimizes the picture for watching film. Select Auto or Off. • Color Space - Select Color Space for the source. Video sources uses YCbCr, but PC uses RGB. • Gamma - Set the shape of the Gamma curve. Use lower Gamma values for bright room conditions, and higher values when it’s dark. 3 3. When you have finished adjusting More Picture Settings, press the Exit button on the remote.

Adjusting More Picture Settings • Game Low Latency - elect On to reAdjustingduce video thedela yColor (lag) TemperatureAdjusting the Color Temperature To adjust more picture settings: when gaming. Adjusting the color temperature changes the white balance of the • Film Mode picture. 1. rom the PICTURE menu, use the More Picture Back Auto or . Adjusting the color temperature changes the white balance of Arrow buttons to highlight More the picture. To adjust the color temperature: Picture , and then press OK . Color Temperature Normal • Color Space - elect Color pace for the source. Video Color Temperature Back sources uses YCbCr, but PC uses RB.To adjust the color temperature:1. rom the MRE PICTURE menu, Black Detail O Normal 2. Use the Arrow buttons to use the Arrow buttons to Active Full Array ™ Low • Gamma - et the shape of the amma curve. Use lower Cool highlight the setting you wish amma values for bright room conditions, and higher highlight Color Temperature , Clear Action O 1. From the MORE PICTURE menu, use the Arrow buttons to Computer to adjust, then press the Left/ values when its dark. and then press OK . Right Arrow buttons to change Reduce Noise highlight Color Temperature, and then press OK. the setting: Game Low Latency O 3. 2. Use the Arrow buttons 2on. Usethe tremotehe Arro wto buhighlightttons oan colorthe Exit button on the remote. remote to highlight a color • Color Temperature - Film Mode On temperature preset and then press OK. temperature preset and then Color Space Auto ee Adjusting the Color press OK . Temperature. Gamma 2.2 • Normal is optimized for television• Nor mviewing.al is optimized for • Black Detail - Adjusts the television viewing. average brightness of the • Cool produces a blue-hued picture. picture to compensate for • Computer optimizes the picture• Coo forl puserodu asces a PC a blu monitor.e-hued large areas of brightness. picture. elect , Low , Medium , or • Computer optimizes the High . 3. When you have finished adjustingpi cttheure color for u setemperature, as a • Xtreme Black Engine™ - Based on the content, dynamically press the Exit button on the remote.PC monitor. adjusts and balances the brightness and the contrast ratio 3. of the picture by locally adjusting backlight zones. press the Exit button on the remote. • Clear Action - Reduces blur in scenes with fast action but limtis the range for the Backlight setting. • Reduce Noise - Reduce Signal Noise - iminishes artifacts in the Owner’s Manual - Model FSN On Screen Menu | Picture Settings | 21 image caused by the digitizing of image motion content. elect , Low , Medium , or High . - Reduce Block Noise - Reduces pielation and , Low , Medium , or High .

12 3

Adjusting the Picture Mode Edit Settings Saving a Custom Picture Mode Locking/Unlocking a Custom Picture Mode Picture Mode Edit Settings allow you to make precise adjustments Custom picture modes allow you to save a group of custom settings Custom picture modes can be locked/unlocked with a unique PIN to to the picture and to create picture modes to save groups of picture for various viewing conditions and video sources. prevent accidental changes to their settings. settings. • Changes made while on any preset picture mode will add an To lock all custom picture modes: To adjust the Picture Mode Edit settings: asterisk on the top right corner of the preset mode. • The custom picture mode is not automatically saved. 1. From the PICTURE MODE EDIT 1. From the PICTURE menu, use the menu, use the Arrow buttons Back System PIN code Back Arrow buttons to highlight Picture Picture Mode Edit Back To save a custom picture mode: to highlight Lock Picture Change the PIN used for the System PIN. Mode Edit, and then press OK. SavePicture Picture Mode Mode Calibrated Save Picture Mode Back Mode, and then press OK. The 1. From the PICTURE MODE EDIT The PICTURE MODE EDIT menu is LockAuto BrightnessPicture Mode Control Off LOCK PICTURE MODE menu is displayed. menu, use the Arrow buttons displayed. ResetBacklight Picture Mode - Calibrated 90 to highlight Save Picture New PIN 2. Use the Arrow buttons to Brightness 50 Mode, and then press OK. The 2. Use the Number Pad on your highlight the setting you wish to Contrast 50 SAVE PICTURE MODE menu is a b c d e f g h i remote to enter a unique 4-digit adjust, then press OK to change Color 50 displayed. j k l m n o p q r PIN. If a system PIN is set, then Confirm PIN Adjusting the Picture Mode Editthe setting: Settings Tint 0 s t u v w x y z 0 lock/unlock. If no system PIN is 2. Use either on-screen keyboard 1 2 3 4 5 6 7 8 9 • Save Picture Mode - Save a Sharpness 20 set, then you will be prompted to enter a name for your custom Cancel Save custom picture mode. .@# äêí Space to set a PIN. Picture Mode Edit Settings allow you to make precise adjustments More Picture picture mode. to the picture and to create picture modes to save groups of Enter the 4-digit PIN using the numbers keys on • Lock Picture Mode - Prevent Picture Mode Edit Save 3. Highlight Save and press OK. the remote. picture settings. changes to custom picture Color Calibration 3. Highlight Save and press OK. modes. Choose between On or 4. Press the Exit button to exit the To adjust the Picture Mode Edit settings: 4. Press the Exit button to exit the Off. menu screens. menu screens. Picture Mode Edit Back • Reset Picture Mode - To unlock all custom picture modes: 1. From the PICTURE menu, useStandard the Arrow† - Reset buttonsthe picture to Save Picture Mode highlight Picture Mode Editmode, and settings then press to factory OK . The Lock Picture Mode On 1. From the PICTURE MODE EDIT PICTURE MODE EDIT menu is displayed. menu, use the Arrow buttons default values. Reset Picture Mode - Standard* to highlight 2. Use the Arrow buttons to highlight the setting you wish to Lock Picture Mode, and then press OK. The adjust, then press OK to change the setting: LOCK PICTURE MODE menu is 3 displayed. • Save Picture Mode - Save a custom picture mode. 2. Use the Arrow buttons to select Off. • Lock Picture Mode - Prevent changes to custom picture modes. Choose between On or Off. 3. Use the Number Pad on your remote to enter your 4-digit PIN. • Reset Picture Mode - Standard - Reset the picture mode settings to factory default values. Adjusting the Picture Mode Edit Settings Saving a Custom Picture Mode Locking/Unlocking a Custom Picture Mode 4. Make any desired changes to the picture modes. Picture Mode Edit Settings allow you to make precise adjustments Custom picture modes allow you to save a group of custom settings Custom picture modes can be locked/unlocked with a unique PIN to 5. Then turn ON Lock Picture Mode. to the picture and to create picture modesSaving to savea Custom groups ofPicture picture Modefor various viewing conditions and video sources. prevent accidental changes to their settings. settings. • Changes made while on any preset picture mode will add an 6. Press the Exit button to exit the menu screens. To lock all custom picture modes: † Only availableasterisk on customized on the toppreset right modes. corner of the preset mode. To adjust the Picture Mode Edit settings:Custom picture modes allow you to save a group of custom settings for various viewing conditions and 13 1. From the PICTURE MODE EDIT video sources. • The custom picture mode is not automatically saved. 1. From the PICTURE menu, use the menu, use the Arrow buttons Back System PIN code Back Arrow buttons to highlight Picture • PictureChanges Mode made Edit whileBack on any Topreset save picture a custom mode picture will addmode: an to highlight Lock Picture Change the PIN used for the System PIN. Mode Edit, and then press OK. SavePictureasterisk Picture Mode Mode on the top Calibrated right corner of the preset mode. Save Picture Mode Back Mode, and then press OK. The The PICTURE MODE EDIT menu is 1. From the PICTURE MODE EDIT • LockAutoThe BrightnessPicture custom Mode Control picture mode Off is not automatically saved. LOCK PICTURE MODE menu is displayed. menu, use the Arrow buttons ResetBacklight Picture Mode - Calibrated 90 displayed. New PIN To save a custom picture mode: to highlight Save Picture 2. Use the Arrow buttons to Brightness 50 Mode, and then press OK. The 2. Use the Number Pad on your highlight the setting you wish to Contrast 50 SAVE PICTURE MODE menu is a b c d e f g h i remote to enter a unique 4-digit adjust, then press OK to change Color1. From the PICTURE 50 MODE displayed.EDIT menu, use the Arrow j k l m n o p q r PIN. If a system PIN is set, then Confirm PIN the setting: Tint buttons to highlight 0 Save Picture Mode, and then press s t u v w x y z 0 lock/unlock. If no system PIN is 2. Use either on-screen keyboard 1 2 3 4 5 6 7 8 9 • Save Picture Mode - Save a SharpnessOK. The SAVE PICTURE 20 MODE menu is displayed. set, then you will be prompted to enter a name for your custom Cancel Save custom picture mode. .@# äêí Space to set a PIN. More2. PictureUse either on-screen keyboardpicture to enter mode. a name for your Enter the 4-digit PIN using the numbers keys on • Lock Picture Mode - Prevent Picturecustom Mode Edit picture mode. Save 3. Highlight Save and press OK. the remote. changes to custom picture 3. Highlight Save and press OK. Color3. CalibrationHighlight Save and press OK. modes. Choose between On or 4. Press the Exit button to exit the 4. Press the Exit button to exit the Off. 4. Press the button to exit the menu screens. menu screens. Exit menu screens. Picture Mode Edit Back • Reset Picture Mode - To unlock all custom picture modes: Standard† - Reset the picture Save Picture Mode mode settings to factory Lock Picture Mode On 1. From the PICTURE MODE EDIT menu, use the Arrow buttons default values. Reset Picture Mode - Standard* to highlight Lock Picture Mode, and then press OK. The LOCK PICTURE MODE menu is displayed.

5. Then turn ON Lock Picture Mode.

6. Press the Exit button to exit the menu screens.

† Only available on customized preset modes. 13 3

Adjusting the Picture Mode Edit Settings Saving a Custom Picture Mode Locking/Unlocking a CustomLocking/Unlocking Picture Mode a Custom Picture Mode Picture Mode Edit Settings allow you to make precise adjustments Custom picture modes allow you to save a group of custom settings Custom picture modes can be locked/unlocked with a unique PIN to to the picture and to create picture modes to save groups of picture for various viewing conditions and video sources. prevent accidental changes to their settings. Custom picture modes can be locked/unlocked with a unique PIN to prevent accidental changes to their settings. settings. • Changes made while on any preset picture mode will add an To lock all custom picture modes:To lock all custom picture modes: To adjust the Picture Mode Edit settings: asterisk on the top right corner of the preset mode. • The custom picture mode is not automatically saved. 1. From the PICTURE MODE EDIT 1. From the PICTURE menu, use the menu, use the Arrow buttons Back 1. From the PICTURE MODE EDIT menu, use the Arrow System PIN code Back Arrow buttons to highlight Picture Picture Mode Edit Back To save a custom picture mode: to highlight Lock Picture buttons to highlight Lock Picture Mode, and then press OK. Change the PIN used for the System PIN. Mode Edit, and then press OK. SavePicture Picture Mode Mode Calibrated Save Picture Mode Back Mode, and then press OK. The 1. From the PICTURE MODE EDIT The LOCK PICTURE MODE menu is displayed. The PICTURE MODE EDIT menu is LockAuto BrightnessPicture Mode Control Off LOCK PICTURE MODE menu is displayed. menu, use the Arrow buttons 2. Use the Number Pad on your remote to enter a unique 4-digit ResetBacklight Picture Mode - Calibrated 90 displayed. New PIN to highlight Save Picture PIN. If a system PIN is set, then lock/unlock. If no system PIN Brightness 50 2. Use the Arrow buttons to Mode, and then press OK. The is set, then you will be prompted2. Use to setthe aNumber PIN. Pad on your highlight the setting you wish to Contrast 50 SAVE PICTURE MODE menu is remote to enter a unique 4-digit 3.a bHighlightc d e Savef g handi press OK. adjust, then press OK to change Color 50 displayed. j k l m n o p q r PIN. If a system PIN is set, then Confirm PIN the setting: Tint 0 4.s tPressu v thew xExity zbutton0 to exit thelock/unlock. menu screens. If no system PIN is 2. Use either on-screen keyboard 1 2 3 4 5 6 7 8 9 • Save Picture Mode - Save a Sharpness 20 set, then you will be prompted to enter a name for your custom Cancel Save custom picture mode. .@# äêí Space to set a PIN. More Picture picture mode. To unlock all custom picture modes: Enter the 4-digit PIN using the numbers keys on • Lock Picture Mode - Prevent Picture Mode Edit Save 3. Highlight Save and press OK. the remote. changes to custom picture Color Calibration 3. Highlight Save and press OK. modes. Choose between On or 1. From the PICTURE MODE4. EDITPress themenu, Exit usebutton the to Arrow exit the 4. Press the Exit button to exit the Off. buttons to highlight Lock Picturemenu Mode screens., and then press OK. menu screens. Picture Mode Edit Back The LOCK PICTURE MODE menu is displayed. • Reset Picture Mode - To unlock all custom picture modes: Standard† - Reset the picture Save Picture Mode 2. Use the Arrow buttons to select Off. mode settings to factory Lock Picture Mode On 1. From the PICTURE MODE EDIT 3. Use the Number Pad on your remotemenu, to use enter the your Arrow 4-digit buttons PIN. 3 default values. Reset Picture Mode - Standard* 4. Make any desired changes to theto picturehighlight modes. Lock Picture Mode, and then press OK. The 5. Then turn ON Lock Picture Mode. LOCK PICTURE MODE menu is 6. Press the Exit button to exit thedisplayed. menu screens.

2. Use the Arrow buttons to select Off. Deleting a Custom Picture Mode Custom3. Usepicture the modesNumber that Pad are on no your longer remote needed to enter can be your deleted. 4-digit PIN. Deleting a Custom Picture 4.Mode Make any desired changes to the picture modes. Inputs assigned to a deleted custom picture mode 5. Then turn ON Lock Picture Mode. Custom picture modes that are no longerbecome needed assigned can be to deleted. the Calibrated picture mode. 6. Press the button to exit the menu screens. To delete a custom picture mode: Exit † Only available on customized preset modes. To delete a custom picture mode: 13 1. From the PICTURE MODE EDIT menu, use the Arrow buttons 1. From the PICTURE MODE EDIT menu, to highlight Delete Pictureuse Mode, the Arrow and thenbuttons press to highlightOK. The To delete the user created Custom 1 picture mode, DELETE PICTURE MODE windowDelete isPicture displayed. Mode, and then select the Delete button. 2. Use the Left/Right Arrowpress buttons OK. Theto highlight DELETE PICTUREDelete and Delete Cancel press OK. MODE window is displayed. 3. Press the Exit button to2. exit Use the the menu Left/Right screens. Arrow buttons to highlight Delete and press OK.

3. Press the Exit button to exit the menu screens.

Owner’s Manual - Model FSN Resetting a Picture Mode On Screen Menu | Picture Settings | 23 A preset picture mode that has been edited can be restored to the factory default settings.

To reset a customized preset picture mode: Select Reset to restore Standard picture mode to factory defaults.

1. From the PICTURE MODE EDIT menu, Reset Cancel use the Arrow buttons to highlight Reset Picture Mode, and then press OK. The RESET PICTURE MODE window is displayed.

2. Use the Left/Right Arrow buttons to highlight Reset and press OK.

3. Press the Exit button to exit the menu screens.

14 3

Deleting a Custom Picture Mode Custom picture modes that are no longer needed can be deleted.

Inputs assigned to a deleted custom picture mode become assigned to the Calibrated picture mode.

To delete a custom picture mode:

1. From the PICTURE MODE EDIT menu, use the Arrow buttons to highlight To delete the user created Custom 1 picture mode, Delete Picture Mode, and then select the Delete button. press OK. The DELETE PICTURE Delete Cancel MODE window is displayed.

2. Use the Left/Right Arrow buttons to highlight Delete and press Resetting a Picture ModeOK.

3. Press the Exit button to exit the menu screens. A preset picture mode that has been edited can be restored to the factory default settings. To reset a customized presetResetting picture a Picture mode: Mode A preset picture mode that has been edited can be restored to the factory default settings. 1. From the PICTURE MODE EDIT menu, use the Arrow

buttons to highlight ResetTo reset Picture a customized Mode, presetand then picture press mode: Select Reset to restore Standard OK. The RESET PICTURE MODE window is displayed. picture mode to factory defaults. 1. From the PICTURE MODE EDIT menu, Reset Cancel 2. Use the Left/Right Arrowuse buttons the Arrow to highlightbuttons toReset highlight and press OK. Reset Picture Mode, and then 3. Press the Exit button to exitpress the OK menu. The screens. RESET PICTURE MODE window is displayed. 3 2. Use the Left/Right Arrow buttons to highlight Reset and press OK. Adjusting the Color Tuner Settings 3. Press the Exit button to exit the menu screens.

Adjusting the Color Tuner Settings To turn color channels off and on: To adjust the 11 Point White Balance settings: The Color Tuner, 11 Point White Balance, and test patterns The Color Tunerallow settings technicians allow to manually you to adjustcalibrate the the HSB TV. Calibration color and 11 point white balance, turn color channels off for testing, and display 1. From the COLOR CALIBRATION menu, use the Arrow buttons 1. From the Color Tuner menu, use the Arrow buttons to requires specialized training, an input with precisely set to highlight , and then press . The COLOR highlight , and then press the Arrow color bar, flat, and ramp test patterns. Color Tuner OK Color Tuner Left/Right 14 colors, and a specialized light meter. TUNER menu is displayed. buttons until the 11 POINT WHITE BALANCE menu is displayed. The Color Tuner, 11 Point White Balance, and test 11 Point White Balance patterns allow technicians to manually calibrate the TV. Color Tuner Gain Red Green Blue The ColorCalibration Tuner settings requires allow specialized you to adjust training, the HSB an inputcolor andwith 11 point white balance,Red turn colorGreen Blue Cyan Magenta Yellow 5% 0 0 0 channelsprecisely off for testing, set colors, and displayand a specialized color bar, flat, light and meter. ramp test patterns. Hue 0 0 0 0 25 -14 Saturation -1 5 -4 0 -2 0 To adjust the HSB color settings: To adjust the HSB color settings: Brightness -24 0 -22 0 0 0 Offset 0 0 0 1. From the COLOR CALIBRATION menu, use the Arrow buttons Gain 0 0 0 1.to From highlight the COLOR Color Tuner CALIBRATION, and then menu,press OKuse. Thethe ArrowCOLOR buttons to highlight Color Tuner, and TUNERthen press menu OK. is displayed. The COLOR TUNER menu is displayed. 2. Use the Arrow buttons on the remote to highlight Red, Green, 2. Use the Arrow buttons on the remote to highlight the Gain or Blue. and Color values you wish to adjust. Press the OK button and Color Tuner use the Left/Right Arrow buttons to adjust the value. When Red Green Blue Cyan Magenta Yellow 3. Press the OK button to turn the color channel off or on. An X you are finished, press theOK button to save the setting. Hue 0 0 0 0 25 -14 appears over a color channel that has been turned off. Saturation -1 5 -4 0 -2 0 3. When you have finished, press theExit button. 4. Use the Arrow buttons to highlight another color channel to Brightness -24 0 -22 0 0 0 turn off or on. Only two color channels can be turned off at the Offset 0 0 0 same time. Gain 0 0 0 5. When you have finished with the color channels, press theExit 2. Use the Arrow buttons on the remote to highlight the Hue, 2. Use the Arrow buttons on the remote to highlight the Hue, Saturation,button. Brightness, Offset, or Saturation, Brightness, Offset, or Gain of the color you wish Gain of the color you wish to adjust. Press the OK button. to adjust. Press the OK button. 3. Use the Left/Right Arrow buttons to adjust the value. When you are finished press the OK 3. Usebutton the Left/Right to save the Arrow setting. buttons to adjust the value. When you are finished press theOK button to save the setting. 4. When you have finished adjusting the color tuner settings, press the Exit button. 4. When you have finished adjusting the color tuner settings, press the Exit button.

15 3

Adjusting the Color Tuner Settings (continued)

Adjusting the Color Tuner Settings To turn color channels off and on: To adjust the 11 Point White Balance settings: To turn color channels off and on: The Color Tuner settings allow you to adjust the HSB color and 11 point white balance, turn color channels off for testing, and display 1.1. From From the the COLOR COLOR CALIBRATION CALIBRATION menu, menu, use usethe theArrow Arrow buttons buttons to1. highlight From the Color Color Tuner Tuner, and menu, use the Arrow buttons to color bar, flat, and ramp test patterns. tothen highlight press Color OK. The Tuner COLOR, and TUNERthen press menu OK is. Thedisplayed. COLOR highlight Color Tuner, and then press the Left/Right Arrow TUNER menu is displayed. buttons until the 11 POINT WHITE BALANCE menu is displayed. The Color Tuner, 11 Point White Balance, and test 11 Point White Balance patterns allow technicians to manually calibrate the TV. Color Tuner Gain Red Green Blue Calibration requires specialized training, an input with Red Green Blue Cyan Magenta Yellow 5% 0 0 0 precisely set colors, and a specialized light meter. Hue 0 0 0 0 25 -14 Saturation -1 5 -4 0 -2 0 To adjust the HSB color settings: Brightness -24 0 -22 0 0 0 Offset 0 0 0 1. From the COLOR CALIBRATION menu, use the Arrow buttons Gain 0 0 0 to highlight Color Tuner, and then press OK. The COLOR TUNER menu is displayed. 2. Use the Arrow buttons on the remote to highlight Red, Green, 2. Use the Arrow buttons on the remote to highlight the Gain 2.or Use Blue the. Arrow buttons on the remote to highlight Red, Green, or Blueand. Color values you wish to adjust. Press the OK button and Color Tuner 3. Press the OK button to turn the color channel off or on. An X appears useover the a color Left/Right channel Arrow that buttons to adjust the value. When 3. Press the OK button to turn the color channel off or on. An X Red Green Blue Cyan Magenta Yellow has been turned off. you are finished, press theOK button to save the setting. Hue 0 0 0 0 25 -14 appears over a color channel that has been turned off. Saturation -1 5 -4 0 -2 0 4. Use the Arrow buttons to highlight another color channel to turn3. offWhen or on. you Only have two finished, color press theExit button. 4. Usechannels the Arrow can bebuttons turned to off highlight at the same another time. color channel to3 Brightness -24 0 -22 0 0 0 turn off or on. Only two color channels can be turned off at the Offset 0 0 0 5.same When time. you have finished with the color channels, press the Exit button. Gain 0 0 0 5. When you have finished with the color channels, press theExit 2. Use the Arrow buttons on the remote to highlight the Hue, Adjusting the Color Tuner Settings To turn color channels off and on: To adjustbutton. the 11 Point White Balance settings: Saturation, Brightness, Offset, or Gain of the color you wish To adjust the 11 Point White Balance settings: The Color Tuner settings allow you to adjust the HSB color and 11 to adjust. Press the OK button. point white balance, turn color channels off for testing, and display 1. From the COLOR CALIBRATION menu, use the Arrow buttons 1. 1.From From the the Color COLOR Tuner TUNER menu, usemenu, the use Arrow the buttonsArrow buttons to to highlight Color Tuner, and then to highlight Color Tuner, and then press OK. The COLOR highlight Color Tuner, and then press the Left/Right Arrow color bar, flat, and ramp test patterns. 3. Use the Left/Right Arrow buttons to adjust the value. When press the Left/Right Arrow buttons until the 11 POINT WHITE BALANCE menu is displayed. TUNER menu is displayed. buttons until the 11 POINT WHITE BALANCE menu is displayed. you are finished press theOK button to save the setting. The Color Tuner, 11 Point White Balance, and test 11 Point White Balance patterns allow technicians to manually calibrate the TV. Color Tuner 4. When you have finished adjusting the color tuner settings, Gain Red Green Blue Calibration requires specialized training, an input with Red Green Blue Cyan Magenta Yellow press the Exit button. 5% 0 0 0 precisely set colors, and a specialized light meter. Hue 0 0 0 0 25 -14 Saturation -1 5 -4 0 -2 0 To adjust the HSB color settings: Brightness -24 0 -22 0 0 0 Offset 0 0 0 1. From the COLOR CALIBRATION menu, use the Arrow buttons Gain 0 0 0 to highlight Color Tuner, and then press OK. The COLOR TUNER menu is displayed. 2. Use the Arrow buttons on the remote to highlight Red, Green, 2. 2.Use Use the the Arrow Arrow buttons buttons on the on remotethe remote to highlight to highlight the Gainthe Gain and Color values you wish to or Blue. andadjust. Color Press values the you OK wish button to adjust. and use Press the theLeft/Right OK button Arrow and buttons to adjust the value. When Color Tuner useyou the are Left/Right finished, pressArrow the buttons OK button to adjust to save the thevalue. setting. When Red Green Blue Cyan Magenta Yellow 3. Press the OK button to turn the color channel off or on. An X you are finished, press theOK button to save the setting. Hue 0 0 0 0 25 -14 appears over a color channel that has been turned off. 3. When you have finished, press the Exit button. 15 Saturation -1 5 -4 0 -2 0 3. When you have finished, press theExit button. 4. Use the Arrow buttons to highlight another color channel to Brightness -24 0 -22 0 0 0 turn off or on. Only two color channels can be turned off at the Offset 0 0 0 same time. Gain 0 0 0 5. When you have finished with the color channels, press theExit 2. Use the Arrow buttons on the remote to highlight the Hue, button. Saturation, Brightness, Offset, or Gain of the color you wish to adjust. Press the OK button.

3. Use the Left/Right Arrow buttons to adjust the value. When Owner’s Manual - Model FSN On Screen Menu | Picture Settings | 25 you are finished press theOK button to save the setting. 4. When you have finished adjusting the color tuner settings, press the Exit button.

15 3

Adjusting the Color Tuner Settings (continued) To show or hide the SMPTE Test Pattern: To show or hide the Flat Test Pattern: To show or hide the Ramp Test Pattern: To show or hide the SMPTE Test Pattern: 1. From the Color Tuner menu, use the Arrow buttons to 1. From the Color Tuner menu, use the Arrow buttons to 1. From the Color Tuner menu, use the Arrow buttons to 1. highlightFrom the Color Color Tuner Tuner, andmenu, then use press the Arrow the Left/Right buttons toArrow highlight Color Tunerhighlight, and Color then Tuner press , and then press the Left/Right Arrow highlight Color Tuner, and then press the Left/Right Arrow buttonsthe Left/Right until the Arrow SMPTE buttons Test Pattern until the menu SMPTE is displayed. Test Pattern menu is displayed.buttons until the Flat Test Pattern menu is displayed. buttons until the Ramp Test Pattern menu is displayed.

SMPTE Test Pattern Flat Test Pattern Ramp Test Pattern

Off Off Off

2. Use the Arrow buttons on the remote to highlight Off. Use the Left/Right Arrow buttons to highlight On to show the SMPTE Pattern. 3 2. Use the Arrow buttons on the remote to highlight Off. Use the 2. Use the Arrow buttons on the remote to highlight Off. Use the 2. Use the Arrow buttons on the remote to highlight Off. Use the Left/Right—or— Arrow buttons to highlight On to show the SMPTE Left/Right Arrow buttons to select the percentage brightness Left/Right Arrow buttons to select the color for the ramp test pattern. Selecting a color immediately shows that color ramp. Pattern.To hide the SMPTE Test Pattern, use the Left/Right Arrow buttons to highlightfor the flatOff. test pattern.Selecting a percentage immediately

—or— shows the flat pattern at thatbrightness . 3. When you are finished, press the EXIT button. —or—

To show or hide the SMPTE Test Pattern: To show or hide the Flat Test Pattern: To show or hide the Ramp Test Pattern: To hide the SMPTE Test Pattern, use the Left/Right Arrow To show or hide the Flat Test Pattern: —or— To hide the Ramp Test Pattern, use the Left/Right Arrow 1. From the Color Tuner menu, use the Arrow buttons to 1. Frombuttons the to Color highlight Tuner Off menu,. use the Arrow buttons to 1. From the Color Tuner menu, use the Arrow buttons to 1. From the Color Tuner menu, use the Arrow buttons to highlight Color Tuner, and then press buttons to highlight Off. highlight Color Tuner, and then press the Left/Right Arrow highlight Color Tuner, and then press the Left/Right Arrow highlightTo disable Color the FlatTuner Test, and Pattern, then usepress the the Left/Right Left/Right Arrow Arrow 3. Whenthe Left/Right you are finished, Arrow buttons press the untilEXIT the button. SMPTE Test Pattern menu is displayed. buttons until the SMPTE Test Pattern menu is displayed. buttons until the Flat Test Pattern menu is displayed. buttonsbuttons untilto highlight the Ramp Off Test. Pattern menu is displayed. 3. When you are finished, press theEXIT button. SMPTE Test Pattern Flat Test Pattern 3. When you are finished, Ramppress Test the PatternEXIT button.

Off Off Off

2. Use the Arrow buttons on the remote to highlight Off. Use the Left/Right Arrow buttons to 2. Use the Arrow buttons on the remote to highlight Off. Use the 2. Usehighlight the Arrow On to buttons show the on SMPTE the remote Pattern. to highlight Off. Use 3the 2. Use the Arrow buttons on the remote to highlight Off. Use the Left/Right Arrow buttons to highlight On to show the SMPTE Left/Right—or— Arrow buttons to select the percentage brightness Left/Right Arrow buttons to select the color for the ramp test Pattern. for the flat test pattern.Selecting a percentage immediately pattern. Selecting a color immediately shows that color ramp. To hide the SMPTE Test Pattern, use the Left/Right Arrow buttons to highlight Off. —or— shows the flat pattern at thatbrightness . —or— 3. When you are finished, press the EXIT button.

To show or hide the SMPTE Test Pattern: To showTo hide or hide the SMPTEthe Flat Test Test Pattern, Pattern: use the Left/Right Arrow To show or hide the Ramp Test Pattern: —or— To hide the Ramp Test Pattern, use the Left/Right Arrow buttons to highlight Off. To show or hide the Ramp Test Pattern: buttons to highlight Off. 1. From the Color Tuner menu, use the Arrow buttons to 1. From the Color Tuner menu, use the Arrow buttons to 1. FromTo disable the Color the TunerFlat Test menu, Pattern, use theuse Arrowthe Left/Right buttons toArrow highlight , and then press the Arrow 3. highlightWhen you are finished,, and press then the pressEXIT the button. Arrow 1.highlight From the Color Tuner, andmenu, then use press the Arrow the buttons Arrowto highlight Color Tuner, and then press Color Tuner Left/Right Color Tuner Left/Right buttons Colorto highlight Tuner Off. Left/Right 3. When you are finished, press theEXIT button. buttons until the SMPTE Test Pattern menu is displayed. buttons until the Flat Test Pattern menu is displayed. buttonsthe Left/Right until the Arrow Ramp buttonsTest Pattern until menuthe Ramp is displayed. Test Pattern menu is displayed. 3. When you are finished, press theEXIT button. SMPTE Test Pattern Flat Test Pattern Ramp Test Pattern

Off Off Off 16

2. Use the Arrow buttons on the remote to highlight Off. Use the Left/Right Arrow buttons to 2. Use the Arrow buttons on the remote to highlight Off. Use the 2. Use the Arrow buttons on the remote to highlight Off. Use the 2. Useselect the Arrowthe color buttons for the on ramp the test remote pattern. to highlight Selecting Off a .color Use theimmediately shows that color ramp. Left/Right Arrow buttons to highlight On to show the SMPTE Left/Right Arrow buttons to select the percentage brightness Left/Right—or— Arrow buttons to select the color for the ramp test Pattern. for the flat test pattern.Selecting a percentage immediately pattern. Selecting a color immediately shows that color ramp. To hide the Ramp Test Pattern, use the Left/Right Arrow buttons to highlight Off. —or— shows the flat pattern at thatbrightness . —or— 3. When you are finished, press the EXIT button.

To hide the SMPTE Test Pattern, use the Left/Right Arrow —or— To hide the Ramp Test Pattern, use the Left/Right Arrow buttons to highlight Off. buttons to highlight Off. ® To disable the Flat Test Pattern, use the Left/Right Arrow 26 All Rights Reserved. SkyVue 3. When you are finished, press theEXIT button. buttons to highlight Off. 3. When you are finished, press theEXIT button. 3. When you are finished, press theEXIT button.

16 3

Adjusting the Color Tuner Settings (continued)

To show or hide the Uniformity Analyzer Test Pattern: To show or hide the Uniformity Analyzer Test Pattern: 1. From the COLOR CALIBRATION menu, use the Arrow buttons 1. From the COLOR CALIBRATION menu, use the Arrow buttons to highlight Calibration Tests, to highlight Calibration Tests, and then press the Left/Right andArrow then buttons press the until Left/Right the UNIFORMITY Arrow buttons ANALYZER until TEST the UNIFORMITY PATTERN ANALYZER TEST PATTERN menumenu is is displayed. displayed.

Uniformity Analyzer Test Pattern

Off

2. Use the Arrow buttons on the remote to highlight Off. Use the Left/Right Arrow buttons to 2. highlightUse the OnArrow to show buttons the on Uniformity the remote Analyzer to highlight Test Off Pattern.. Use the Left/Right Arrow buttons to highlight On to show the —or—Uniformity Analyzer Test Pattern. To—or— hide the Uniformity Analyzer Test Pattern, use the Left/Right Arrow buttons to highlight Off. 3. When you are finished, press the EXIT button. To hide the Uniformity Analyzer Test Pattern, use the Left/ Right Arrow buttons to highlight Off.

3. When you are finished, press theExit button.

Owner’s Manual - Model FSN On Screen Menu | Picture Settings | 27 3 Adjusting The Audio Settings Adjusting the Audio ADJUSTING THE AUDIO SETTINGS • Balance - Adjusts the loudness of the audio output from the To adjust the audio settings: left and right speakers.

1. Press the Menu button Toon adjustthe remote. the audio The on-screen settings: menu Audio Back • Lip Sync - Adjusts the synchronization between the display is displayed. image and the accompanying audio track. 1. Press the Menu button on the Speakers Auto • Digital Audio Out - Changes the type of processing for 2. Use the Arrow buttons onremote. the remote The to on-screenhighlight Audio menu Volume Control Display On digital audio out and HDMI ARC output when connected to a and press OK. The AUDIO menuis displayed. is displayed. Surround Sound On home theater audio system. Select Auto, PCM, Dolby D or 3. Use the Arrow buttons 2.to highlightUse the theArrow setting buttons you wish on tothe Volume Leveling Off Bitstream. adjust, then press Left/Rightremote Arrow to buttons highlight to change Audio theand Balance 0 setting. press OK. The AUDIO menu Lip Sync 0 You must select Bitstream for audio with more than is displayed. Digital Audio Out Auto two channels (3.0, 5.0, or 5.1, for example). • Speakers - Turns the built-in speakers On or Off. Analog Audio Out Fixed 3. Use the Arrow buttons to • Volume Control Display - Toggle between On or highlight the setting you wish Off to hide or display the on-screen volume slider that • Analog Audio Out - Sets the volume control properties for to adjust, then press Left/ appears when volume is adjusted. the RCA connector when connected to a home theater audio Right Arrow buttons to change system. Select Variable if you are controlling the volume with 3 • Surround Sound -the Surround setting: sound uses DTS the TV’s volume controls, or select Fixed if an external audio TruSurround ™ to deliver• Speakersan immersive - Turns surround the built-insound device (sound bar or AV receiver) will control the volume. experience from the TV’s internalspeakers speakers. On or Off. TruSurround completes the entertainment experience by providing deep, rich bass and by delivering crisp 4. When you have finished adjusting the audio settings, press the ADJUSTINGdetails andTHE clear, AUDIO intelligible SETTINGS dialog.When theSelect TV speakersOn or Off. are set to On, DTS• signalsBalance - Adjusts the loudnessExit button of theon theaudio remote. output from the • Volume Leveling - Volumecannot leveling be uses passed DTS throughTruVolume™ digital to audiomaintain outputs. consistentleft and right volume speakers. To adjustlevels the audio during settings: transitions between programAudio content, AV formats,Back and input• sources.Lip Sync Select - Adjusts On the synchronization between the display or Off. In a few cases,• volumeVolume leveling Control may Display artificially - Toggle suppress between volume On increases,image or Off and to themaking accompanying audio track. 1. Press the Menu button on the Speakers Auto it difficult to hear dialog orhide flattening or display sudden the on-screen noises. If this volume occurs, slider turn that volume appears leveling off. - Changes the type of processing for remote. The on-screen menu Volume Control Display On • Digital Audio Out when volume is adjusted. digital audio out and HDMI ARC output when connected to a is •displayed. Balance - Adjusts the loudness of theSurround audio Sound output from On the left and right speakers. • Surround Sound - Surround sound uses DTS TruSurroundhome theater™ audio system. Select Auto, PCM, Dolby D or 2. Use• theLip SyncArrow - Adjustsbuttons the on synchronization tothe deliver Volumean immersive betweenLeveling the surround display Off soundimage andexperience theBitstream accompanying from. remoteaudio to track.highlight Audio theand TV’s internalBalance speakers. TruSurround 0 completes the press• Digital OK. AudioThe AUDIO Out - Changesmenuentertainment the Liptype Sync of experience processing by for providing 0 digital audio deep, out rich andYou bass HDMI must ARCselect Bitstream for audio with more than 3 is displayed.output when connected toand a homeby delivering Digitaltheater Audio audioOutcrisp details system. Auto and Select clear, Auto, intelligible PCM,two Dolby dialog. channels D or (3.0, 5.0, or 5.1, for example). Select OnAnalog or Off Audio. Out Fixed 3. Use Bitstream.the Arrow buttons to ™ highlight• Analog the Audiosetting Out you -• SetswishVolume the volume Leveling control - Volume properties leveling for the uses RCA DTS connector TruVolume when to maintain consistent volume levels during• Analog transitions Audio Out - Sets the volume control properties for to adjust,connected then to a homepress theater Left/ audio system. Select Variable if you are controllingthe RCA the connector volume when connected to a home theater audio • Balance - Adjusts the loudnessbetween of the program audio outputcontent, from AV theformats, and input sources. ADJUSTING THE AUDIO SETTINGS Rightwith Arrow the TV’sbuttons volume to controls,change or select Fixed if an external audio device system.(sound barSelect or AVVariable if you are controlling the volume with theleft setting: and right speakers. Select On or Off. In a few cases, volume leveling may receiver) will control the volume.artificially suppress volume increases, makingthe it TV’s difficult volume to controls, or select Fixed if an external audio To adjust the audio settings: Back • Lip Sync - -Adjusts Turns the the built-in synchronization between the display device (sound bar or AV receiver) will control the volume. Audio 4. When• Speakers you have finished adjustinghear the dialog audio or settings, flattening press sudden the Exit noises. button If onthis the occurs, remote. turn imagespeakers and On the or accompanying Off. volume audio leveling track. off. 1. Press the Menu button on the Speakers Auto 4. When you have finished adjusting the audio settings, press the - Changes the type of processing for remote. The on-screen menu Volume Control Display On • Digital Audio Out 18 When the TV speakers are set to On, DTS signals Exit button on the remote. is displayed. digital audio out and HDMI ARC output when connected to a Surround Sound On homecannot theater be passed audio throughsystem. Selectdigital Auto,audio outputs.PCM, Dolby D or 2. Use the Arrow buttons on the Volume Leveling Off Bitstream. remote to highlight Audio and Balance 0 • Volume Control Display - Toggle between On or Off to press OK. The AUDIO menu Lip Sync 0 hideYou or must display select the Bitstreamon-screen volumefor audio slider with that more appears than is displayed. Digital Audio Out Auto whentwo volume channels is adjusted.(3.0, 5.0, or 5.1, for example). Analog Audio Out Fixed ™ 3. Use the Arrow buttons to • Surround Sound - Surround sound uses DTS TruSurround highlight the setting you wish to deliver an immersive surround sound experience from • Analogthe TV’s Audiointernal Out speakers. - Sets the TruSurround volume control completes properties the for to adjust, then press Left/ ® 28 theentertainment RCA connector experience when connected by providing to a deep,home rich theater bass audio All Rights Reserved. SkyVue Right Arrow buttons to change system. Select if you are controlling the volume with and by deliveringVariable crisp details and clear, intelligible dialog. the setting: the TV’s volume controls, or select Fixed if an external audio Select On or Off. • Speakers - Turns the built-in device (sound bar or AV receiver) will control the volume. speakers On or Off. • Volume Leveling - Volume leveling uses DTS TruVolume™ 4. Whento youmaintain have finishedconsistent adjusting volume the levels audio during settings, transitions press the When the TV speakers are set to On, DTS signals Exitbetween button on program the remote. content, AV formats, and input sources. cannot be passed through digital audio outputs. Select On or Off. In a few cases, volume leveling may artificially suppress volume increases, making it difficult to hear dialog or flattening sudden noises. If this occurs, turn • Volume Control Display - Toggle between On or Off to volume leveling off. hide or display the on-screen volume slider that appears 18 when volume is adjusted. • Surround Sound - Surround sound uses DTS TruSurround™ to deliver an immersive surround sound experience from the TV’s internal speakers. TruSurround completes the entertainment experience by providing deep, rich bass and by delivering crisp details and clear, intelligible dialog. Select On or Off. • Volume Leveling - Volume leveling uses DTS TruVolume™ to maintain consistent volume levels during transitions between program content, AV formats, and input sources. Select On or Off. In a few cases, volume leveling may artificially suppress volume increases, making it difficult to hear dialog or flattening sudden noises. If this occurs, turn volume leveling off. 18 3

ADJUSTING THE NETWORK SETTINGS Changing the Manual Setup Settings Finding MAC Addresses for Network Setup Advanced users can fine-tune the network settings using the Manual The security settings on your router may require you to enter the Your TV is Internet-ready, featuring both an Ethernet port and Setup feature. TV’s MAC address in the router’s settings. built-in high-speed Wireless-N. To change advanced network settings: To find the TV’s MAC address: 1. From the NETWORK menu, If your TV is connected to a network with an Ethernet Back highlight Manual Setup and press Manual Setup 1. From the NETWORK menu, highlight Manual Setup and press OK. cable, you will not see the wireless network connection The MANUAL SETUP menu is displayed. Adjusting The Networkmenu. Settings You must unplug the Ethernet cable to set a OK. The MANUAL SETUP menu is DHCP Off displayed. IP Address __.__.__.__ wireless network connection. 2. Find the MAC address for the TV at the bottom of the list. The MAC Your TV is Internet-ready, featuring both an Ethernet port and built-in high-speed Wireless-N. 2. To change the settings manually, Subnet Mask __.__.__.__ addresses for the connections in use are displayed: Connecting to a Wireless Network Default Gateway __.__.__.__ Connecting to a Wireless Network use the Arrow buttons on the To connect to a wireless network remote to highlight DHCP and then Pref. DNS Server __.__.__.__ • RJ45 MAC - The Ethernet or RJ45 MAC address may be whose network name (SSID) is being use the Left/Right Arrow buttons to Alt. DNS Server __.__.__.__ needed to set up your network when you have connected To connect to a wireless networkbroadcast: whose network name (SSID) is being broadcast: change the setting to Off. RJ45 MAC 0:0:0:0:0:0 the TV to your network when you have connected the TV to 1. Press the Menu button on the Wireless MAC 0:0:0:0:0:0 your network with an Ethernet (Cat 5) cable. 3. Use the Arrow and OK buttons to 1. Press the Menu button on theremote. remote. The The on-screenon-screen menumenu is is Back Network adjust each setting: • Wireless MAC - The Wireless (WiFi) MAC address may be displayed. displayed. needed to connect your TV to your network with WiFi. Wired Connection Disconnected • IP Address - The IP address 2. Use the Arrow buttons on the remote to highlight Network Save 2. Use the Arrow buttons on the Wireless Access Points assigned to the TV. and press OK. The NETWORKremote menu isto displayed. highlight Network and Cancel • Subnet Mask - The subnet Exit 2D 3. If you do not see your wirelesspress network OK. The displayed, NETWORK highlight menu is More Access Points and pressdisplayed. OK. The WIRELESS ACCESS • Default Gateway - Your network’s default gateway address. 3 POINTS menu, which is a list of available wireless networks, is 3. If you do not see your wireless Manual Setup displayed. • Pref. DNS Server - Your preferred domain name server network displayed, highlight Hidden Network More address. 4. Highlight the name of your wirelessAccess network Points (this and is pressthe network’s OK. The Test Connection SSID) and press OK. WIRELESS ACCESS POINTS menu, • Alt. DNS Server - Your alternate domain name server address. which is a list of available wireless Changing the Manual Setup Settings Finding MAC Addresses for Network Setup ADJUSTING5. Using the on-screeen THE NETWORK keyboard, enterSETTINGS your network’s password, 4. Use the Arrow buttons on the remote to highlight Save and press networks, is displayed. Advanced users can fine-tune the network settings using the Manual The security settings on your router may require you to enter the then highlight Connect and press OK. OK. Your TV is Internet-ready, featuring both an Ethernet port and Setup feature. 5. Press the Exit button on the remote. TV’s MAC address in the router’s settings. Press OK to select your wireless access point. built-in6. Press high-speed the Exit buttonWireless-N. on the4. remote.Highlight the name of your wireless network (this is the To change advanced network settings: To find the TV’s MAC 3address: network’s SSID) and press OK. 1. From the NETWORK menu, If your TV is connected to a network with an Ethernet Manual Setup Back 1. From the NETWORK menu, highlight Manual Setup and press OK. 5. Using the on-screeen keyboard, highlight Manual Setup and press cable, you will not see the wireless network connection The MANUAL SETUP menu is displayed. menu. You must unplugenter the Ethernetyour network’s cable to setpassword, a OK. The MANUAL SETUP menu is DHCP Off wireless network connection.then highlight Connect and press displayed. IP Address __.__.__.__ Changing the Manual Setup Settings Finding MAC Addresses for Network Setup2. Find the MAC address for the TV at the bottom of the list. The MAC ADJUSTING THE NETWORK SETTINGS OK. Subnet Mask __.__.__.__ Advanced users can fine-tune the network 2.settings To change using the the settings Manual manually,The security settings on your router may requireaddresses you to forenter the the connections in use are displayed: Connecting to a Wireless Network Default Gateway __.__.__.__ Setup6. Press feature. the Exit button on the use the Arrow buttons on TV’sthe MAC address in the router’s settings. Your TV is Internet-ready, featuring bothTo an connect Ethernet to porta wireless and network Changing the Manual Setupremote. Settings remote to highlight DHCP and then Pref. DNS Server __.__.__.__ • RJ45 MAC - The Ethernet or RJ45 MAC address may be built-in high-speed Wireless-N. whose network name (SSID) is being To change advanced network settings: use the Left/Right Arrow buttonsTo find tothe TV’s Alt.MAC DNS address:Server __.__.__.__ needed to set up your network when you have connected 19 broadcast: Advanced users can fine-tune the network settings using the change the setting to Off. the TV to your network when you have connected the TV to 1. From the NETWORK menu, RJ45 MAC 0:0:0:0:0:0 If your TV is connected to a networkManual with an Setup Ethernet feature. Back 1. Press the Menu button on the Manual Setup 1. From the NETWORKWireless MACmenu, highlight 0:0:0:0:0:0 Manual Setupyour and network press OK with. an Ethernet (Cat 5) cable. cable, you will not see the wireless network connection highlight Manual Setup and press 3. Use the Arrow and OK buttons to Toremote. change The advanced on-screen network menu settings: is Network Back The MANUAL SETUP menu is displayed. • Wireless MAC - The Wireless (WiFi) MAC address may be menu. You must unplug the Ethernet cable to set a OK. The MANUAL SETUP menu is DHCPadjust each setting: Off displayed. displayed. IP Address __.__.__.__ needed to connect your TV to your network with WiFi. wireless network connection. Wired Connection Disconnected • IP Address - The IP address2. Find the MAC address for the TV at the bottom of the list. The MAC Save 2.1. Use From the the Arrow NETWORK buttons 2.menu, onTo change thehighlight the WirelessManual settings Access Setup Pointsmanually, and Subnet assignedMask to the __.__.__.__ TV. addresses for the connections in use are displayed: Connecting to a Wireless Network remote to highlight Network and Default Gateway __.__.__.__ Cancel press OK. The MANUAL SETUPuse the menu Arrow is displayed. buttons on the • Subnet Mask - The subnet Exit 2D To connect to a wireless network press OK. The NETWORK menuremote is to highlight DHCP and then Pref. DNS Server __.__.__.__ • RJ45 MAC - The Ethernet or RJ45 MAC address may be whose network name (SSID) is being 2. To change the settings manually, use the Arrow buttons on • Default Gateway - Your network’s displayed. use the Left/Right Arrow buttons to Alt. DNS Server __.__.__.__ needed to set up your network when you have connected broadcast: the remote to highlight DHCP and then use the Left/Right default gateway address. change the setting to Off. the TV to your network when you have connected the TV to 3. If Arrowyou do buttons not see to change your wireless the setting to Off.Manual Setup RJ45 MAC 0:0:0:0:0:0 • Pref. DNS Server - Your preferredyour networkdomain namewith an server Ethernet (Cat 5) cable. 1. Press the Menu button on the network displayed, highlight Hidden Network Wireless MAC 0:0:0:0:0:0 3. Use the Arrow and OK3. buttons UseMore the to adjustArrow each and setting:OK buttons to address. remote. The on-screen menu is Back NetworkAccess Points and press OK.adjust The each setting:Test Connection • Wireless MAC - The Wireless (WiFi) MAC address may be displayed. WIRELESS ACCESS POINTS menu, • Alt. DNS Server - Your alternateneeded domain to connect name server your TV address. to your network with WiFi. Wired Connection• IP Address Disconnected - The IP• addressIP Address assigned - The to IPthe address TV. which is a list of available wireless 4. SaveUse the Arrow buttons on the remote to highlight Save and press 2. Use the Arrow buttons on the Wireless Access Points assigned to the TV. networks,• Subnet is displayed. Mask - The subnet Exit 2D. remote to highlight Network and CancelOK. • Subnet Mask - The subnet Exit 2D 5. Press the Exit button on the remote. press OK. The NETWORK menu is 4. Highlight• Default the Gatewayname -of Your your network’s defaultPress OK to gateway select your wireless address. access point. Your network’s displayed. wireless network (this is• Defaultthe Gateway - default gateway address. network’s SSID) and press OK. 3. If you do not see your wireless Manual Setup • Pref. DNS Server - Your preferred domain name server network displayed, highlight Hidden Network More Owner’s5. Using Manual the on-screeen - Model FSN keyboard,address. On Screen Menu | Picture Settings | 29 Access Points and press OK. The Test Connectionenter your network’s password, • Alt. DNS Server - Your alternate domain name server address. WIRELESS ACCESS POINTS menu, then highlight Connect and press which is a list of available wireless OK. 4. Use the Arrow buttons on the remote to highlight Save and press networks, is displayed. OK. 6. Press the Exit button5. onPress the the Exit button on the remote. 4. Highlight the name of your Press OKremote. to select your wireless access point. wireless network (this is the 19 network’s SSID) and press OK. 5. Using the on-screeen keyboard, enter your network’s password, then highlight Connect and press OK.

6. Press the Exit button on the remote. 19 Changing the Manual Setup Settings (continued)

• Pref. DNS Server - Your preferred domain name server address. • Alt. DNS Server - Your alternate domain name server address.

4. Use the Arrow buttons on the remote to highlight Save and press OK. 5. 5. Press the Exit button on the remote.

Finding MAC Addresses for Network Setup

The security settings on your router may require you to enter the TV’s MAC address in the router’s settings. To find the TV’s MAC address:

1. From the NETWORK menu, highlight Manual Setup and press OK. The MANUAL SETUP menu is displayed. 2. Find the MAC address for the TV at the bottom of the list. The MAC addresses for the connections in use are displayed: • RJ45 MAC - The Ethernet or RJ45 MAC address may be needed to set up your network when you have connected the TV to your network when you have connected the TV to your network with an Ethernet (Cat 5) cable. 3 • Wireless MAC - The Wireless (WiFi) MAC address may be needed to connect your TV to your network with WiFi.

Connecting to a Hidden NetworkConnecting to a Hidden Network Testing Your Network Connection To connect to a wireless network whose network name (SSID) is not To test your network connection: To connect to a wireless networkbeing broadcast: whose network name (SSID) is not being broadcast: 1. From the NETWORK menu, highlight Test Connection and press OK. 1. From the NETWORK menu, 1. From the NETWORK menu, highlight Hidden Network 2. The TEST CONNECTION screen displays the connection method, highlight Hidden Network and Enter Access Point Name Back and press OK. The ENTER ACCESS POINT NAME screen network name, signal strength, and download speed of your press OK. The ENTER ACCESS Enter your access point name. This is displayed. POINT NAME screen is displayed. is used to connect to an access point network connection. with a hidden SSID. 2. Using the on-screen keyboard, enter your network’s name 2. Using the on-screen keyboard, 3. Press the Exit button on the remote. (SSID), then highlight Connect and press OK. enter your network’s name 3. Using the on-screen keyboard,(SSID), enterthen highlightyour network’s Connect a b c d e f g h i password, then highlight Connectand press and OK.press OK. j k l m n o p q r 4. Press the Exit button on the remote. s t u v w x y z 0 3. Using the on-screen keyboard, 1 2 3 4 5 6 7 8 9 enter your network’s password, .@# äêí Space then highlight Connect and press OK. Connect 4. Press the Exit button on the remote.

20 Testing Your Network Connection

To test your network connection:

1. From the NETWORK menu, highlight Test Connection and press OK. 2. The TEST CONNECTION screen displays the connection method, network name, signal strength, and download speed of your network connection. 3. Press the Exit button on the remote.

Owner’s Manual - Model FSN On Screen Menu | Picture Settings | 31 3

Setting Timers SETTING TIMERS Setting the Auto Power Off Feature Setting the Timer To help save energy, your TV is set by default to turn off after Setting the Timer 10 minutes without a video or audio signal. This feature can be deactivated. When activated, the TV’s timerWhen will turn activated, the TV offthe after TV’s a timer set period will turn of time. the TV off after a set period To set the timer: of time. To set the Auto Power Off feature: 1. Press the Menu button on the 1. From the TIMERS menu, use the Up/Down Arrow buttons on Timers Back 1. Press the Menu button on theremote. remote. The The on-screen on-screen menu menu is the remote to highlight Auto Power Off. is displayed. displayed. Sleep Timer Off Auto Power Off 10 Minutes 2. Use the Left/Right Arrow buttons on the remote to change 2. Use the Arrow buttons on2. theUse remote the Arrow to highlight buttons Timers on the whether the TV will turn off. If you don’t want the TV to turn off Blank Screen and press OK. The TIMERS menuremote is displayed. to highlight Timers and when there is no signal, change the setting to Off. Otherwise, press OK. The TIMERS menu is select . 3. Use the Left/Right Arrow buttons on the remote to 10 minutes displayed. highlight the period of time after which you want the TV to 3. When you have finished setting the auto power off time, press go to sleep: 30, 60, 90, 120,3. Use or 180 the Left/Rightminutes. If Arrow you don’t the Exit button on the remote. want the sleep timer to activate,buttons change on thethe settingremote to to Off . highlight the period of time after Blank Screen - Immediately blank the screen while audio is 4. When you have finished setting the sleep timer, press the which you want the TV to go to streaming. This saves energy and LED life. Exit button on the remote sleep: 30, 60, 90, 120, or 180 minutes. If you don’t want the sleep timer to activate, change the setting to Off. 4. When you have finished setting the sleep timer, press the Exit Setting the Auto Power Off Featurebutton on the remote.

To help save energy, your TV is set by default to turn off after 10 minutes without a video or audio signal. This feature can be deactivated. To set the Auto Power Off feature:

1. From the TIMERS menu, use the Up/Down Arrow buttons on the remote to highlight Auto Power Off. 2. 2. Use the Left/Right Arrow buttons on the remote to change whether the TV will turn off. If you don’t want the TV to turn off when there is no signal, change the setting to Off. Otherwise, select 10 minutes. 3. 3. When you have finished setting the auto power off time, press the Exit button on the remote. • Blank Screen - Immediately blank the screen while audio is streaming. This saves energy 21 and LED life.

Setting Up ChannelsSETTING UP CHANNELS Scanning for Channels 3 Skipping Channels The Channels Menu The TV may need to scan for channels before it can display programs After a channel scan is completed, you may find that some channels You can use the TV’s Channels menu to: and their associated information. A channel scan is required for are too weak to watch comfortably. There may also be some • Find Channels free over-the-air channels (using an antenna) and cable channels channels you do not want to view. You can remove these channels You can use the TV’s Channels menu to: from an out-of-the-wall connection (without a cable box). Moving from the TV’s memory with the Skip Channel feature. • Select channels to skip Channels Back SETTING UP CHANNELS • Find Channels Scanning• Digital forAudio Channels Skippingthe TV to Channels an area with different channels requires the TV to scan for • Analog Audio Find Channels channels again. • Select channels to skip The• SetTV may Parental need Controls to scan for channels before it can display programs After a channel scan is completed, you may find that some channels Channels that have been removed with the Skip You can use the TV’s Channels menu to: Skip Channels and their• Digital associated Audio information. A channel scan is required for are too weak to watch comfortably. There may also be some Channel feature can still be viewed if the channel • Analog Audio Analog Audio Stereo To perform an Auto Channel Scan: • Find Channels free •over-the-air Set Parental channels Controls (using an antenna) and cable channels channels you do not want to view. You can remove these channels is entered using the Number Pad. If you wish to from an out-of-the-wall connection (withoutDigital Audio a cable box). English Moving from the TV’s memory with the Skip Channel feature. • Select channels to skip Channels Back 1. From the CHANNELS menu, completely block a channel from being viewed, use the the TV to an area with different channelsParental requires Controls the TV to scan for highlight Find Channels, and parental controls. See Locking and Unlocking Channels. Find Channels • Analog Audio channels again. press OK. The auto channel scan Skip Channels Channels that have been removed with the Skip • Digital Audio Scanning for Channels begins.Channel feature can still be viewed if the channel Analog Audio Stereo To perform an Auto Channel Scan: • Set Parental Controls is entered using the Number Pad. If you wish to To remove a channel: The TV may need to scan for channels before it can display programs and their associated information. 2. Wait until the channel scan is Digital Audio English 1. From the CHANNELS menu, completely block a channel from being viewed, use the A channel scan is required for free over-the-air channels (using an antenna) and cable channels from 100% complete. Highlight Done 1. From the CHANNELS menu, Skip Channels Back Parental Controls highlight Find Channels, and parental controls. See Locking and Unlocking Channels. and press OK. highlight Skip Channel, and an out-of-the-wall connection (withoutpress a cable OK. Thebox). auto Moving channel the TVscan to an area with different channels 0 Test 0 requires the TV to scan for channels again. Find Channels Back press OK. The SKIP CHANNEL begins. 3. Press the Exit button on the 1 Test 1 Channels Found menu is displayed. To perform an Auto Channel Scan: To removeremote. a channel: 2 Test 2 2. Wait until the channel scan is Digital 2. For each channel you wish to 3 Test 3 100% complete. Highlight Done 1. From the CHANNELS menu, Skip Channels Back 3 If the channel scan is cancelled, Analog remove, use the Up/Down and press OK. thehighlight channels Skip thatChannel were, and already 4 Test 4 1. From the CHANNELS menu, highlight Find Channels, and press 0 45%Test Complete 0 Arrow buttons on the remote to Find Channels Back discoveredpress OK . Theare SKIPretained. CHANNEL A new OK. The auto channel scan begins.3. Press the Exit button on the 1 CancelTest 1 highlight the channel and press Channels Found channelmenu isscan displayed. will clear all channels. 2. Wait until the channel scan is 100%remote. complete. Highlight Done 2 Test 2 OK. A P appears to the right of Digital and press OK. 2. For each channel you wish to 3 Test 3 each channel you select. SETTING UP CHANNELS Scanning for Channels IfSkipping the channel Channels scan is cancelled, Analog remove, use the Up/Down 3. Press the Exit button on the remote.the channels that were already 4 Test 4 3. When you have selected all The TV may need to scan for channels before it can display programs After a channel scan is completed, you may45% Complete find that some channels Arrow buttons on the remote to discovered are retained. A new of the channels you wish to You can use the TV’s Channels menu to: and their associated information. A channelIf the channelscan is requiredscan is cancelled, for are the too channels weak tothat watch were comfortably.already CancelThere may also be some highlight the channel and press channel scan will clear all channels. remove, press the Exit button free over-the-air channels (using an antenna)discovered and are cable retained. channels A new channelchannels scan you will do clear not all want channels. to view. You can remove these channels OK. A P appears to the right of • Find Channels on the remote. from an out-of-the-wall connection (without a cable box). Moving from the TV’s memory with the Skip Channel feature. each channel you select. • Select channels to skip Channels Back the TV to an area with different channels requires the TV to scan for • Analog Audio Find Channels channels again. Skipping Channels 3. When you have selected all Skip Channels Channels that have been removed with the Skip of the channels you wish to • Digital Audio Channel feature can still be viewed if the channel Analog Audio Stereo To perform an Auto Channel Scan: remove, press the Exit button • Set Parental Controls After a channel scan is completed, you mayis find entered that usingsome thechannels Number are tooPad. weakIf you to wishwatch to comfortably. on the remote. Digital Audio English 1. From the CHANNELS menu, There may also be some channels you do notcompletely want to view. block You a channelcan remove from these being channels viewed, from use the the TV’s Parental Controls highlight Find Channels, and memory with the Skip Channel feature. parental controls. See Locking and Unlocking Channels. press OK. The auto channel scan begins. To remove a channel: To remove a channel: 2. Wait until the channel scan is 22 100% complete. Highlight Done 1. From the CHANNELS menu, highlight1. From Skip the CHANNELSChannel, and menu, press Skip Channels Back and press OK. OK. The SKIP CHANNEL menu is displayed. highlight Skip Channel, and 0 Test 0 Find2. ForChannels each channel Backyou wish to remove,press use OK .the The Up/Down SKIP CHANNEL Arrow 3. Press the Exit button on the 1 Test 1 Channelsbuttons Found on the remote to highlightmenu the channel is displayed. and press OK. A remote. 2 Test 2 Digitalcheckmark appears to the right of each channel you select. 22 2. For each channel you wish to 3 Test 3 If the channel scan is cancelled, 3.Analog When you have selected all of theremove, channels use you the wish Up/Down to remove, the channels that were already 4 Test 4 45% Completepress the Exit button on the remote.Arrow buttons on the remote to discovered are retained. A new Cancel highlight the channel and press channel scan will clear all channels. Channels that have been removed with the Skip Channel feature can still be viewed if the channel is OK. A P appears to the right of entered using the Number Pad. each channel you select.

3. When you have selected all Owner’s Manual - Model FSN of the channels you wish to On Screen Menu | Picture Settings | 33 remove, press the Exit button on the remote.

22 3

LISTENING TO ALTERNATE AUDIO To use the Digital Language feature: 1. From the CHANNELS menu, Changing the Analog Audio Language highlight Digital Audio Digital Audio Back Some analog over-the-air (free) and cable channels broadcast and press OK. The DIGITAL English programs in more than one language. The TV’s Analog Audio LANGUAGE menu is displayed. Spanish/ Video Description feature allows you to listen to audio in an alternate language using 2. Select your preferred language: French Secondary Audio Programming (SAP). English, Spanish/Video Description, French. Press OK. Not all programs are broadcast in SAP. The Analog Listening To Alternate AudioAudio Language feature only works when the program 3. Press the Exit button on the being viewed is being broadcast with Secondary Audio remote. Changing the Analog Audio LanguageProgramming.

Some analog over-the-air (free)To and use cablethe Analog channels Audio broadcast feature: programs in more than one language. The TV’s Analog Audio Analog Audio Back 3 1. From the CHANNELS menu, feature allows you to listen to audio in an alternate language using highlight Analog Audio and Stereo Secondary Audio Programming (SAP). press OK. The ANALOG AUDIO SAP LISTENINGTo use the Analog TO ALTERNATE Audio feature: AUDIOmenu is displayed. To use the DigitalMono Language feature: 2. Select Stereo, SAP (secondary 1. From the CHANNELS menu, Changing1. From the the AnalogCHANNELS Audio menu, Language highlightaudio Analogprogramming), Audio and or pressMono OK.. Thehighlight ANALOG Digital AUDIO Audio menu Digital Audio Back Press OK. Some is analog displayed. over-the-air (free) and cable channels broadcast and press OK. The DIGITAL English LANGUAGE menu is displayed. programs2. Select in Stereo, more SAPthan (secondary one language.3. audioPress programming),Thethe ExitTV’s button Analog or on Mono.Audio the Press OK. Spanish/ Video Description feature allows you to listen to audio in an alternate language using 3. Press the Exit button on the remote.remote. 2. Select your preferred language: French Secondary Audio Programming (SAP). English, Spanish/Video Description, French. Press OK. Not all programs are broadcast in SAP. The Analog Audio Language feature only works when the program 3. Press the Exit button on the being viewed is being broadcast with Secondary Audio remote. Programming. 3

To use the Analog Audio feature: To use the Digital Language feature:Analog Audio Back LISTENING TO ALTERNATE AUDIO1. From the CHANNELS menu, To use the Digital Language feature: highlight Analog Audio and Stereo 1.press From OK the. The CHANNELS ANALOG AUDIOmenu,1. highlight From the Digital CHANNELSSAP Audio menu,and press Changing the Analog Audio Language menuOK. isThe displayed. DIGITAL LANGUAGE menuhighlight is displayed. DigitalMono Audio Digital Audio Back Some analog over-the-air (free) and cable channels broadcast and press OK. The DIGITAL English 2. 2.Select Select Stereo your, SAPpreferred (secondary language: English, Spanish/Video programs in more than one language. The TV’s Analog Audio LANGUAGE menu is displayed. Spanish/ Video Description audioDescription, programming), French or . Press. OK. 23 feature allows you to listen to audio in an alternate language usingMono Press . 2. Select your preferred language: French Secondary Audio Programming (SAP). 3. PressOK the Exit button on the remote. English, Spanish/Video 3. Press the Exit button on the Description, French. Press OK. Not all programs are broadcastremote. in SAP. The Analog Audio Language feature only works when the program 3. Press the Exit button on the being viewed is being broadcast with Secondary Audio remote. Programming.

To use the Analog Audio feature: Analog Audio Back 1. From the CHANNELS menu, highlight Analog Audio and Stereo press OK. The ANALOG AUDIO SAP menu is displayed. Mono

2. Select Stereo, SAP (secondary audio programming), or Mono. Press OK.

3. Press the Exit button on the 23 remote.

23 Parental Controls Using Parental Controls

The TV’s parental controls allow you to prevent the TV from displaying certain channels or programs without a password. The Parental Controls menu only appears when:

You are using the tuner to receive your TV signals, such as when you are using an antenna for Over- the-Air signals or when connected to cable TV directly from the wall (no cable box). 3 -or- You have a device connected using a composite video cable or a coaxial cable, such as a VCR, satellite or cable box, or DVR and download speed of your network connection. PARENTAL CONTROLS Enabling or Disabling Program Ratings Blocking and Unblocking Content by Rating A channel may sometimes broadcast programs that are meant for Accessing the Parental Controls Menu To manage program content according to its rating, you must Using Parental Controls enable the Program Rating feature. children, and at other times broadcast programs that are meant for mature audiences. You may not want to block the channel The TV’s parental controls allow you to prevent the TV from completely using a channel lock, but you may wish to block certain To access the Parental Controls menu: To enable or disable the Program Rating feature: displaying certain channels or programs without a password. programs from being viewed. 1. From the PARENTAL CONTROLS menu, highlight Locks and The PARENTAL CONTROLS menu only appears when: press OK. The LOCKS menu is displayed. When this is the case, you can use the TV’s Rating Block feature to 1. Press the Menu button on the remote. The on-screen menu is displayed. block content based on its rating. •2. You Use are the using Arrow the tunerbuttons to receive on the your remote TV signals, to highlight such asChannels when you and press2. Select OK. OnThe or CHANNELS Off and press OK. are using an antenna for Over-the-Air signals or when connected to menu is displayed. For a list of content ratings and their definitions, visit cable TV directly from the wall (no cable box). Locking and Unlocking Channels www.tvguidelines.org. 3. Use the Arrow buttons on the remote to highlight Parental Controls and press OK. • You have a device connected using a composite video cable or a When a channel is locked, it will be inaccessible. Locking a channel 4. Enter your set System PIN. coaxial cable, such as a VCR, satellite or cable box, or DVR. is a good way to prevent children from viewing inappropriate material. To block or unblock content by its rating:

To set a custom parental passcode, see Changing the To lock or unlock a channel: 1. From the PARENTAL CONTROLS menu, highlight the content Parental Control PIN. type you want to adjust and press OK: 1. From the PARENTAL CONTROLS menu, highlight Channel USA TV - USA television program broadcasts. Locks and press OK. The CHANNEL LOCKS menu is displayed. USA Movie - USA movie broadcasts. Enabling or Disabling Program Ratings 2. Highlight the channel you want to lock or unlock and press OK. Canadian English - Canadian English television program Accessing the Parental Controls Menu broadcasts. ToTo accessmanage the program PARENTAL content CONTROLS according menu: to its rating, you must enable the Program3. When Rating a channel feature. is locked, the Lock icon appears locked. Canadian French - Canadian French television program The channel is not accessible unless the parental PIN is broadcasts. 1.To Press enable the or Menu disable button the onProgram the remote. Rating The feature: on-screen menu is entered. 2. For each rating type you want to block or unblock, use the displayed. 4. When a channel is unlocked, the Lock icon appears Up/Down and Left/Right Arrow buttons on the remote to 1. From the menu, highlight and press . The LOCKS menu is displayed. PARENTAL CONTROLS Locks OK unlocked. The channel is accessible. highlight the rating type and press OK. 2. Use the Arrow buttons on the remote to highlight Channels and 2. Select On or Off and press OK. 3. When the rating type is blocked, the Lock icon appears press OK. The CHANNELS menu is displayed. locked. Content with this rating and all higher ratings cannot be viewed. 3. Use the Arrow buttons on the remote to highlight Parental Controls and press OK. 4. When the rating type is unblocked, the Lock icon appears unlocked. Content with this rating and all lower ratings can be 4. Enter your set System PIN. viewed. If you want to block all unrated content, highlight Block Unrated Shows and use the Arrow buttons on the remote to select On. To set a custom parental passcode, see Changing the Parental Control PIN. 5. When you are finished adjusting the rating level blocks, press Owner’s Manual - Model FSN On Screen Menu | Picture Settings | 35 the Exit button on the remote.

24 3 3

PARENTAL CONTROLS Enabling or Disabling Program Ratings Blocking and Unblocking Content by Rating PARENTAL CONTROLS ToEnabling manage or program Disabling content Program according Ratings to its rating, you must ABlocking channel mayand Unblockingsometimes broadcast Content by programs Rating that are meant for Using Parental Controls enable the Program Rating feature. children,A channel and may at sometimesother times broadcast broadcast programs programs that that are are meant meant for To manage program content according to its rating, you must for mature audiences. You may not want to block the channel TheUsing TV’s Parental parental Controls controls allow you to prevent the TV from enable the Program Rating feature. children, and at other times broadcast programs that are meant To enable or disable the Program Rating feature: completelyfor mature using audiences. a channel You lock, may but not you want may towish block to block the channelcertain displaying certain channels or programs without a password. The TV’s parental controls allow you to prevent the TV from programscompletely from using being a channel viewed. lock, but you may wish to block certain 1.To Fromenable the or PARENTAL disable the CONTROLS Program Rating menu, feature: highlight Locks and Thedisplaying PARENTAL certain CONTROLS channels menu or programs only appears without when: a password. Whenprograms this isfrom the beingcase, youviewed. can use the TV’s Rating Block feature to 1. pressFrom OK the. ThePARENTAL LOCKS CONTROLSmenu is displayed. menu, highlight Locks and blockWhen content this is thebased case, on youits rating. can use the TV’s Rating Block feature to • TheYou PARENTALare using the CONTROLS tuner to receive menu onlyyour appearsTV signals, when: such as when you press OK. The LOCKS menu is displayed. 2. Select On or Off and press OK. block content based on its rating. are using an antenna for Over-the-Air signals or when connected to • You are using the tuner to receive your TV signals, such as when you 2. Select On or Off and press OK. For a list of content ratings and their definitions, visit cable TV directly from the wall (no cable box). Locking and Unlocking Channels are using an antenna for Over-the-Air signals or when connected to Locking and Unlocking Channels www.tvguidelines.org.For a list of content ratings and their definitions, visit • cableYou have TV directly a device from connected the wall using(no cable a composite box). video cable or a WhenLocking a channel and Unlocking is locked, Channels it will be inaccessible. Locking a channel www.tvguidelines.org. is a good way to prevent children from viewing inappropriate coaxial• You have cable, a suchdevice as connected a VCR, satellite using or a cablecomposite box, or video DVR. cable or a When a channel is locked, it will be inaccessible. Locking a channel material.When a channel is locked, it will be inaccessible. Locking a channel is a Togood block way or to unblock prevent contentchildren by its rating: coaxial cable, such as a VCR, satellite or cable box, or DVR. is a good way to prevent children from viewing inappropriate from viewing inappropriate material. To block or unblock content by its rating: To set a custom parental passcode, see Changing the Tomaterial. lock or unlock a channel: 1. From the PARENTAL CONTROLS menu, highlight the content Parental Control PIN. To lock or unlock a channel: type you want to adjust and press OK: To set a custom parental passcode, see Changing the To lock or unlock a channel: 1. From the PARENTAL CONTROLS menu, highlight the content Parental Control PIN. 1. From the PARENTAL CONTROLS menu, highlight Channel USAtype TV you - USA want television to adjust program and press broadcasts. OK: Locks and press OK. The CHANNEL LOCKS menu is displayed. 1. From the PARENTAL CONTROLS menu, highlight Channel USA Movie - USA movie broadcasts. 1. From the PARENTAL CONTROLS menu, highlight Channel Locks and pressUSA TV OK -. USAThe CHANNELtelevision program broadcasts. 2. HighlightLocks and the press channel OK. youThe wantCHANNEL to lock LOCKS or unlock menu and is displayed. press OK. Canadian English - Canadian English television program Accessing the Parental Controls Menu LOCKS menu is displayed. USA Movie - USA movie broadcasts. broadcasts. 2. Highlight the channel you want to lock or unlock and press OK. Canadian English - Canadian English television program Accessing the Parental Controls Menu 3. 2.When Highlight a channel the channelis locked you, the want to iconlock appearsor unlock and press .OK . To access the PARENTAL CONTROLS menu: Lock locked Canadianbroadcasts. French - Canadian French television program 3.The When channel a channel is not isaccessible , the unless Lock the icon parental appears PIN is . The channelbroadcasts. is not accessible unless 3 To access the PARENTAL CONTROLS menu: 3. When a channel is lockedlocked, the Lock icon appears locked locked. Canadian French - Canadian French television program 1. Press the Menu button on the remote. The on-screen menu is entered.Thethe channel parental is PINnot isaccessible entered. unless the parental PIN is 3 2. Forbroadcasts. each rating type you want to block or unblock, use the entered. displayed.1. Press the Menu button on the remote. The on-screen menu is 4. When a channel is unlocked, the Lock icon appears unlocked. The channel is accessible. 4. When a channel is unlocked, the Lock icon appears 2. Up/DownFor each ratingand Left/Right type you wantArrow to buttonsblock or on unblock, the remote use the to unlocked. TheEnabling channel or isDisabling accessible. Program Ratings highlight theBlocking rating type and and Unblocking press OK .Content by Rating 2.displayed. Use the ArrowPARENTAL buttons on theCONTROLS remote to highlight Channels and 4. When a channel is unlocked, the Lock icon appears Up/Down and Left/Right Arrow buttons on the remote to highlight the rating type and press . PARENTAL CONTROLS unlockedEnabling.To The or manageDisabling channel program is Program accessible. content Ratings according to its rating, 3.you When mustBlocking the ratingA and channel typeUnblocking ismay blocked sometimes Content, theOK Lock broadcastby Rating icon appears programs that are meant for press2. Use OK the. The Arrow CHANNELS buttons menu on the is remote displayed. to highlight Channels and . Contentchildren, with and this atrating other and times all higher broadcast ratings programs cannot that are meant Using Parental Controls Blocking andenable Unblocking the Program Content Rating feature. by Rating 3. lockedWhen the rating type is blocked, the Lock icon appears To manage program content according to its rating, you must be Aviewed. channelfor may mature sometimes audiences. broadcast You mayprograms not want that areto blockmeant the for channel press OK. The CHANNELS menu is displayed. lockedchildren,. Content and at with other this timesrating broadcast and all higher programs ratings that cannot are meant 3. UseUsing the Arrow ParentalThe buttonsTV’s Controls parental on the controls remote allowto highlight you to Parental prevent the TV fromenable theTo Programenable or Rating disable feature. the Program Rating feature: completely using a channel lock, but you may wish to block certain 4. Whenbefor viewed. themature rating audiences. type is unblocked You may, the not Lock want icon to appearsblock the channel Controls3. Use the and Arrow pressdisplaying OKbuttons. certain on channelsthe remote or programsto highlight without Parental a password. A channel may sometimes broadcast programs that are meant for children, and at other timesprograms broadcast from being viewed. The TV’s parental controls allow you to prevent the TV from To enable1. orFrom disable the the PARENTAL Program CONTROLS Rating feature: menu, highlight andunlocked completely. Content using with a channel this rating lock, and but allyou lower may ratingswish to can block be certain Controls and press OK. programs that are meant for mature audiences. You may not want to Locksblock 4.the Whenchannel the completely rating type using is unblocked, the Lock icon appears 4. Enterdisplaying your setThe certainSystem PARENTAL channelsPIN. CONTROLS or programs menu without only appears a password. when: press OK. The LOCKS menu is displayed. viewed.programsWhen from this being is theviewed. case, you can use the TV’s Rating Block feature to a channel1. From lock, the but PARENTAL you may wishCONTROLS to block menu, certain highlight programs Locks from being and viewed.unlocked. Content with this rating and all lower ratings can be If you want blockto block content all unrated based content,on its rating. highlight 4. EnterThe your PARENTAL set System CONTROLS PIN. menu only appears when: viewed.When this is the case, you can use the TV’s RatingBlock Block feature to • You are using the tuner to receive your TV signals, such as whenWhen you thispress is 2. theOK Selectcase,. The youLOCKSOn canor Offmenu use and the is press TV’sdisplayed. Rating OK. Block feature to block contentUnrated based Shows on its rating. and use the Arrow buttons on the remote to are using an antenna for Over-the-Air signals or when connected to If blockyou want content to block based all onunrated its rating. content, highlight Block • You are using the tuner to receive your TV signals, such as when you To block or unblock content by its rating: select On. andFor use a thelist of content buttons ratings on andthe remotetheir definitions, to visit To setcable a custom TV directly parental from passcode, the wall see(no Changingcable box). the 2. Select On or Off and press OK. Unrated Shows Arrow are using an antenna for Over-the-Air signals or when connected to Locking and Unlocking Channels select On. www.tvguidelines.org. ParentalTo set a Controlcustom PINparental. passcode, see Changing the 5. When you areFor finished a list of contentadjusting ratings the rating and leveltheir definitions,blocks, press visit cable TV directly from the wall (no cable box). Locking Whenand Unlocking a channel Channelsis locked, it will be inaccessible. Locking a channel Parental• You Control have a PIN device. connected using a composite video cable or a 5. theWhen Exit you button arewww.tvguidelines.org. finishedon the remote. adjusting the rating level blocks, press 1. From theis PARENTALa good way CONTROLS to prevent menu, children highlight from the viewing content inappropriate type you want to adjust and coaxial cable, such as a VCR, satellite or cable box, or DVR. When a channel is locked, it will be inaccessible. Locking a channel the Exit button on the remote. • You have a device connected using a composite video cable or a press OKmaterial.: To block or unblock content by its rating: coaxial cable, such as a VCR, satellite or cable box, or DVR. is a good way to prevent children from viewing inappropriate USA TV - USA television program broadcasts. To block or unblock content by its rating: 24 To set a custom parental passcode, see Changing the material.To lock or unlock a channel: 1. From the PARENTAL CONTROLS menu, highlight the content Parental Control PIN. USA Movie - USA movie broadcasts. type you want to adjust and press OK: 24 To set a custom parental passcode, see Changing the To lock or unlock a channel: 1. From the PARENTAL CONTROLS menu, highlight the content Parental Control PIN. 1. From the PARENTAL CONTROLS menu, highlight Channel type youUSA want TV to - adjustUSA television and press program OK: broadcasts. CanadianLocks English and press - Canadian OK. The English CHANNEL television LOCKS program menu isbroadcasts. displayed. 1. From the PARENTAL CONTROLS menu, highlight Channel3 USA Movie - USA movie broadcasts. Canadian French - Canadian French television program broadcasts. USA TV - USA television program broadcasts. Locks2. and Highlight press OK the. The channel CHANNEL you want LOCKS to lockmenu or is unlock displayed. and press OK. Canadian English - Canadian English television program Accessing the Parental Controls Menu USA Movie - USA movie broadcasts. 2. For each rating type you want to block or unblock, use the Up/Down and Left/Rightbroadcasts. Arrow 2. Highlight the channel you want to lock or unlock and press OK. Canadian English - Canadian English television program Accessing the Parental Controls Menu buttons on3. theWhen remote a channel to highlight is locked the ,rating the Lock type icon and appears press OK . locked. To access the PARENTAL CONTROLS menu: broadcasts.Canadian French - Canadian French television program PARENTAL CONTROLS Enabling or Disabling Program Ratings Blocking and UnblockingThe channel Content is not byaccessible Rating unless the parental PIN is 3. 3.When When the arating channel type is is lockedblocked,, the the Lock Lock icon icon appears appears locked locked.. Content with this ratingbroadcasts. and all To access1. the Press PARENTAL the CONTROLS button on menu: the remote. The on-screen menuA channel is may sometimesentered. broadcast programs that are meant for Canadian French - Canadian French television program To manage program contentMenu according to its rating, you must higherThe ratings channel cannot is not be accessible viewed. unless the parental PIN is children, and at other times broadcast programs that are meant broadcasts.2. For each rating type you want to block or unblock, use the Using Parental Controls enable the Program Rating feature. entered. 1. Press thedisplayed. Menu button on the remote. The on-screen menu is for4. mature When audiences.the4. Whenrating aYoutype channel mayis unblocked, isnot unlocked want tothe, the blockLock Lock the icon channel appearsappears unlocked. ContentUp/Down with and Left/Right Arrow buttons on the remote to 2. For each rating type you want to block or unblock, use the The TV’s parental controls allow you to prevent the TV from To enable or disable the Program Rating feature: completelythis rating using and unlockeda channel all lower. lock,The ratings channelbut youcan ismaybe accessible. viewed. wish to Ifblock you certainwant to block all unratedhighlight content ,the rating type and press OK. displayed.2. Use the Arrow buttons on the remote to highlight Channels 4.and When a channel is unlocked, the Lock icon appears Up/Down and Left/Right Arrow buttons on the remote to displaying certain channels or programs without a password. programshighlight from Block being Unratedviewed. Shows and use the Arrow buttons on the remote to select On. 1. From the PARENTAL CONTROLS menu, highlight Locks and unlocked. The channel is accessible. highlight3. When the rating the rating type andtype press is blocked OK. , the Lock icon appears 2. Use thepress Arrow OK .buttons The CHANNELS on the remote menu isto displayed. highlight Channels andWhen this is the case, you can use the TV’s Rating Block feature to locked. Content with this rating and all higher ratings cannot The PARENTAL CONTROLS menu only appears when: press OK. The LOCKS menu is displayed. 5. When you are finished adjusting the rating level blocks, press theExit button3. When on the the remote. rating type is blocked, the Lock icon appears block content based on its rating. be viewed. press OK. The CHANNELS menu is displayed. locked. Content with this rating and all higher ratings cannot • You are using the tuner to receive your TV signals, such as when you 2. Select or3. Use and the press Arrow buttons. on the remote to highlight Parental On Off OK be viewed.4. When the rating type is , the icon appears are using an antenna for Over-the-Air signals or when connected to Controls and press OK. unblocked Lock 3. Use the Arrow buttons on the remote to highlight Parental For a list of content ratings and their definitions, visit unlocked. Content with this rating and all lower ratings can be cable TV directly from the wall (no cable box). 4. When the rating type is unblocked, the Lock icon appears LockingControls and Unlocking4. and Enter press your Channels OK set. System PIN. www.tvguidelines.org. viewed. unlocked. Content with this rating and all lower ratings can be • You have a device connected using a composite video cable or a When4. a Enterchannel your is locked,set System it will PIN. be inaccessible. Locking a channel viewed. If you want to block all unrated content, highlight Block is a good way to prevent children from viewing inappropriate Unrated Shows and use the Arrow buttons on the remote to coaxial cable, such as a VCR, satellite or cable box, or DVR. If you want to block all unrated content, highlight Block material. To block or unblock content by its rating: select On. To set a custom parental passcode, see Changing the36 All RightsUnrated Reserved. Shows SkyVue and® use the Arrow buttons on the remote to To set a custom parental passcode, see Changing the Parental Control PIN. 1. From the PARENTAL CONTROLS menu, highlight the content select5. On When. you are finished adjusting the rating level blocks, press To lock or unlockTo aset channel: a custom parental passcode, see Changing the Parental Control PIN. type you want to adjust and press OK: the Exit button on the remote. Parental Control PIN. 5. When you are finished adjusting the rating level blocks, press 1. From the PARENTAL CONTROLS menu, highlight Channel USA TV - USA television program broadcasts. the Exit button on the remote. Locks and press OK. The CHANNEL LOCKS menu is displayed. USA Movie - USA movie broadcasts. 24 2. Highlight the channel you want to lock or unlock and press OK. Canadian English - Canadian English television program Accessing the Parental Controls Menu broadcasts. 24 To access the PARENTAL CONTROLS menu: 3. When a channel is locked, the Lock icon appears locked. Canadian French - Canadian French television program The channel is not accessible unless the parental PIN is broadcasts. 1. Press the Menu button on the remote. The on-screen menu is entered. 2. For each rating type you want to block or unblock, use the displayed. 4. When a channel is unlocked, the Lock icon appears Up/Down and Left/Right Arrow buttons on the remote to unlocked. The channel is accessible. highlight the rating type and press OK. 2. Use the Arrow buttons on the remote to highlight Channels and 3. When the rating type is blocked, the Lock icon appears press OK. The CHANNELS menu is displayed. locked. Content with this rating and all higher ratings cannot be viewed. 3. Use the Arrow buttons on the remote to highlight Parental Controls and press OK. 4. When the rating type is unblocked, the Lock icon appears unlocked. Content with this rating and all lower ratings can be 4. Enter your set System PIN. viewed. If you want to block all unrated content, highlight Block Unrated Shows and use the Arrow buttons on the remote to select On. To set a custom parental passcode, see Changing the Parental Control PIN. 5. When you are finished adjusting the rating level blocks, press the Exit button on the remote.

24 3

SETTING UP CLOSED CAPTIONING Changing the Appearance of Digital Closed Captions • Background Color - Change the color of the background Digital closed captions can be displayed according to your directly behind the text. Your TV can display closed captions for programs that include them. preference. See the diagram on the next page for an explanation of • Background Opacity - Change the transparency of the Closed captions display a transcription of a program’s dialogue. the parts of the closed caption area. background directly behind the text.

To change the appearance of digital closed captions: • Window Color - Change the color of the closed captioning If the program you are viewing is not being broadcast box. with closed captions, the TV will not display them. Setting Up Closed Captioning 1. From the CLOSED CAPTIONS • Window Opacity - Change the opacity of the closed menu, use the Arrow buttons to captioning box. Closed Captioning Settings highlight Digital Style and press The Closed Captions menu does not appear when an OK. 4. When you are satisfied with the appearance of the closed HDMI input is selected. captions, press the Exit button on the remote. Your TV can display closed captions for programs that include them. Closed captions display a 2. Use the Left/Right Arrow Digital Style Back transcription of a program’s dialogue. buttons on the remote to select Text Style As Broadcast To activate or deactivate closedTo captions: activate or deactivate closed captions: Custom. The DIGITAL STYLE menu appears as shown. Test Size Large 1. Press the Menu button on the Text Color Blue 3. Use the Up/Down Arrow 1. Press the Menu button on the remote.remote. The The on-screen on-screen menu menu is is Text Opacity As Broadcast buttons on the remote to displayed. displayed. Closed Captions Back highlight the setting you wish to Text Edges As Broadcast 2. Use the Arrow buttons on 2.the Useremote the Arrowto highlight buttons Closed on the Closed Captions Off change, then use the Left/Right Text Edges Color As Broadcast Captions and press OK. The CLOSEDremote toCAPTIONS highlight Closedmenu is Analog Closed Captions CC1 Arrow buttons to change the Background Color As Broadcast Captions and press OK. The displayed. Digital Closed Captions CS1 setting: Background Opacity As Broadcast CLOSED CAPTIONS menu is 3. Use the Arrow buttons on the displayed.remote to highlight Closed Digital Style • Caption Style - Choose Window Color As Broadcast Captions and then use the Left/Right Arrow buttons to As Broadcast to keep Window Opacity As Broadcast 3. Use the Arrow buttons on the select On or Off. default settings or Custom remote to highlight Closed to manually change each 4. Use the Arrow buttons on the remoteCaptions to highlight and then either use theAnalog Left/ or Digital Closed Captions. Right Arrow buttons to select setting. 5. Use the Left/Right Arrow buttons on the remote to select the caption channel you wish to On or Off. • Text Style - Change the display, then press . Exit font used for the closed 4. Use the Arrow buttons on the remote to highlight either captioning text. Changing the Appearance of DigitalAnalog Closed or Digital Captions Closed • Text Size - Make the text larger or smaller. 3 Captions. • Text Color - Change the color of the text. Digital closed captions can be displayed according to your preference. See the diagram on the next page 5. Use the Left/Right Arrow • Text Opacity - Change the transparency of the text. for an explanation of the parts of the closedbuttons caption on the area. remote to select • Text Edges - Change the effects at the edges of the text, SETTING UP CLOSED CAPTIONINGTo change the appearance of digitalChangingthe closed caption the Appearancecaptions: channel you of wish Digital to Closed Captions • Background Color - Change the color of the background display, then press Exit. such as raising the edges or adding drop shadows. Digital closed captions can be displayed according to your directly behind the text. • Text Edges Color - Change the color of the text edge Your TV can display closed captions for programs that include them. preference. See the diagram on the next page for an explanation of • Background Opacity - Change the transparency of the effects. Closed captions display a transcription of1. a Fromprogram’s the CLOSED dialogue. CAPTIONSthe partsmenu, of use the theclosed Arrow caption buttons area. to highlight Digital Style and background directly behind the text. press OK. To change the appearance of digital closed captions: • Window Color - Change the color of the closed captioning If the program you are viewing2. is notUse being the Left/Right broadcast Arrow buttons on the remote to select Custom. The DIGITAL STYLE menu box. 25 with closed captions, the TV will notappears display as them. shown. 1. From the CLOSED CAPTIONS • Window Opacity - Change the opacity of the closed 3. Use the Up/Down Arrow buttonsmenu, on usethe theremote Arrow to highlightbuttons tothe setting you wish to change, captioning box. then use the Left/Right Arrow buttonshighlight to Digital change Style the setting:and press The Closed Captions menu does not appear when an OK. 4. When you are satisfied with the appearance of the closed HDMI input is selected. • Caption Style - Choose As Broadcast to keep default captions, press the Exit button on the remote. 2. Use the Left/Right Arrow settings or Custom to manually change each setting. Digital Style Back buttons on the remote to select • Text Style - Change the font used for the closed captioning Text Style As Broadcast To activate or deactivate closed captions: Custom. The DIGITAL STYLE text. menu appears as shown. Test Size Large 1. Press the Menu button on the Text Color Blue • Text Size - Make the text3. Uselarger the or Up/Downsmaller. Arrow remote. The on-screen menu is Text Opacity As Broadcast displayed. Closed Captions• Text ColorBack - Change the colorbuttons of the on text. the remote to highlight the setting you wish to Text Edges As Broadcast Closed Captions• Text Opacity Off - Change the transparency of the text. 2. Use the Arrow buttons on the change, then use the Left/Right Text Edges Color As Broadcast remote to highlight Closed Analog Closed• CaptionsText Edges CC1 - Change the Arroweffects buttonsat the edges to change of the thetext, such asBackground raising Color the edges As Broadcast or Captions and press OK. The Digital Closed Captionsadding drop CS1 shadows. setting: Background Opacity As Broadcast CLOSED CAPTIONS menu is displayed. Digital Style • Caption Style - Choose Window Color As Broadcast As Broadcast to keep Window Opacity As Broadcast 3. Use the Arrow buttons on the default settings or Custom remote to highlight Closed Owner’s Manual - Model FSN to manually change eachOn Screen Menu | Picture Settings | 37 Captions and then use the Left/ Right Arrow buttons to select setting. On or Off. • Text Style - Change the font used for the closed 4. Use the Arrow buttons on the remote to highlight either captioning text. Analog or Digital Closed • Text Size - Make the text larger or smaller. Captions. • Text Color - Change the color of the text. 5. Use the Left/Right Arrow • Text Opacity - Change the transparency of the text. buttons on the remote to select the caption channel you wish to • Text Edges - Change the effects at the edges of the text, display, then press Exit. such as raising the edges or adding drop shadows. • Text Edges Color - Change the color of the text edge effects.

25 3

25 Text Background

Window

You can rename the inputs to make them easier to recognize on the INPUT menu. For example, if you have a DVD player connected to the Component input, you can rename that input to display “DVD Player.” See Changing the Input Source. To change the name of an input:

1. Press the Menu button on the remote. The on-screen menu is displayed. 2. 2. Use the Arrow buttons on the remote to highlight Input Settings and press OK. The INPUT SETTINGS menu is displayed. 3. Highlight the input device that you want to rename and press OK. To use a preset input name: a. Highlight the Input Port row and press OK. b. Highlight the input name you want to use and press OK. —or— To enter a custom name: 3 a. Enter your custom label using the on-screen keyboard. b. Highlight OK and press OK. c. The Input Name changes to show the custom name that you created. RENAMING DEVICES ON THE INPUT MENU 4. When you have finished naming your input, press the Exit button on the remote. You can rename the inputs to make them easier to recognize on the INPUT menu. For example, if you have a DVD player connected to the Component input, you can rename that input to display “DVD Input Port Player.” See Changing the Input Source.

To change the name of an input: Back 1. Press the Menu button on the remote. The on-screen menu is Name Input displayed. HDMI-1 DVD Name of Input 2. Use the Arrow buttons on the remote to highlight Input Mon DVD Settings and press OK. The INPUT SETTINGS menu is displayed. Personalized Name 3. Highlight the input device that you want to rename and press OK. a b c d e f g h i 4. To use a preset input name: j k l m n o p q r s t u v w x y z 0 a. Highlight the Input Port row and press OK. 1 2 3 4 5 6 7 8 9 b. Highlight the input name you want to use and press OK. .@# äêí Space —or— OK To enter a custom name: Cancel a. Enter your custom label using the on-screen keyboard. b. Highlight OK and press OK. c. The Input Name changes to show the custom name that you created. 5. When you have finished naming your input, press theExit button on the remote. Owner’s Manual - Model FSN On Screen Menu | Picture Settings | 39

27 3 Changing The Tv Settings System Menu

Viewing System Information Changing the On-Screen Menu Language Using the SYSTEM menu, you can:CHANGING THE TV SETTINGS To view technical data and status information about your TV and Your TV can display the on-screen menu in different languages. • Check for updates Using the SYSTEM menu, you can: network connection: To change the on-screen menu language: • Check for updates Back • View system information System 1. Press the Menu button on the remote. The on-screen menu is • View system information Check for Updates displayed. 1. Press the Menu button on the • Change the on-screen menu language remote. The on-screen menu is • Change the on-screen menu System Information Menu Language Back • Set time zone and local settings 2. Use the Arrow buttons on the remote to highlight System and displayed. language Menu Language English English press OK. The SYSTEM menu is displayed. • Adjust the CEC settings • Set time zone and local Time & Local Settings 2. Use the Arrow buttons on the Español • Adjust when the powerindicatorsettings is illuminated CEC 3. Highlight System Information and press OK. remote to highlight System and FranÇais press OK. The SYSTEM menu is • Adjust to preserve Aspect• RatioAdjust or the fill CEC the settings screen Power Mode Quick Start 4. Use the Up/Down Arrow buttons to scroll through the system displayed. Aspect Ratio Normal Select the menu language. • Name TV • Adjust when the power information. indicator is illuminated TV Name Office TV 3. Use the Arrow buttons on • Check for updates and download available updates Mobile Devices 5. When you are finished reviewing the system information, press the remote to highlight Menu • Adjust to preserve Aspect the Exit button on the remote. • Adjust accessibility settings Accessibility Language and press OK. The Ratio or fill the screen MENU LANGUAGE menu is • Reset the TV settings & set up administrative controls Reset and Admin • Name TV displayed. • Check for updates and Viewing System Information 4. Highlight your preferred download available updates language (English, Español, or To view technical data and status •information Adjust accessibility about your settings TV and network connection: Français) and press OK. • Reset the TV settings & set 5. Press the Exit button on the up administrative controls 1. Press the Menu button on the remote. The on-screen menu is displayed. remote. 2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed. 3. Highlight System Information and press OK. 3 4. Use the Up/Down Arrow buttons to scroll through the system information. 5. When you are finished reviewing the system information, press theExit button on the remote.

CHANGING THE TV SETTINGS Viewing System Information Changing the On-Screen MenuChanging Language the On-Screen Menu Language To view technical data and status information about your TV and Your TV can display the on-screen menu in different languages. Using the SYSTEM menu, you can: network connection: To change the on-screen menu language: To change the on-screen menu language: • Check for updates Back System 1. Press the Menu button on the remote. The on-screen menu is • View system information Check for Updates displayed. 1. Press the Menu button on the1. remote.Press the The Menu on-screen button menu on the is remote. The on-screen menu is • Change the on-screen menu System Information displayed. Menu Language Back 2. Use the Arrow buttons on the remote to highlight System and displayed. language Menu Language English English press OK. The SYSTEM menu is displayed.2. Use the Arrow buttons on the remote to highlight System and • Set time zone and local Time & Local Settings press OK. The SYSTEM menu 2.is displayed.Use the Arrow buttons on the Español 28 settings CEC 3. Highlight System Information and press OK. remote to highlight System and FranÇais 3. Use the on the remote to highlight Arrow buttons press OK. TheMenu SYSTEM Language menu is • Adjust the CEC settings Power Mode Quick Start 4. Use the Up/Down Arrow buttons to scrolland through press OK. the The system MENU LANGUAGEdisplayed. menu is displayed. Aspect Ratio Normal Select the menu language. • Adjust when the power information. 4. Highlight your preferred language (English, Español, or Français) TV Name Office TV 3. Use the Arrow buttons on indicator is illuminated and press OK. Mobile Devices 5. When you are finished reviewing the system information, press the remote to highlight Menu • Adjust to preserve Aspect the Exit button on the remote. 5. Press the Exit button on the remote.Language and press OK. The Ratio or fill the screen Accessibility Reset and Admin MENU LANGUAGE menu is • Name TV displayed. ® • Check for updates and 40 All Rights Reserved. SkyVue 4. Highlight your preferred download available updates language (English, Español, or • Adjust accessibility settings Français) and press OK. • Reset the TV settings & set 5. Press the Exit button on the up administrative controls remote.

28 3

Setting the Time and Local Settings Setting the Time and Local Settings Adjusting the CEC Settings Turning the Power Indicator On or Off To ensure the correct time is displayed when you press the Info The CEC function on your TV enables you to control devices The Power Indicator on the front of your TV normally does not glow To ensure the correct time is displayed when you press the Info button, set the TV’s time zone: button, set the TV’s time zone: connected to HDMI (ARC) input with the included remote, without when the TV is on. You can change this setting if you prefer the light any programming. Using CEC, your VIZIO TV remote can control: to be on. 1. Press the Menu button on the 1. Press the Menu button on the remote. The on-screen menu • Power On/Off remote. The on-screen menu is Back To turn the Power Indicator Light On or Off: Timev and Local Settings is displayed. displayed. • Volume June 11, 2015 11:48AM 1. Press the Menu button on the remote. The on-screen menu is 2. Use the Arrow buttons on the remote to highlight System • Mute 2. Use the Arrow buttons on the Time Zone Pacific (-8) displayed. and press OK. The SYSTEM menu is displayed. remote to highlight System and Daylight Savings Time Auto 3. Use the Arrow buttons on thepress remote OK. The to highlightSYSTEM menu Time is Time Format Not all HDMI devices support CEC. See your device’s 2. Use the Arrow buttons on the remote to highlight System and user manual for details. & Local Settings and press OKdisplayed.. The menu headed by the Country USA press OK. The SYSTEM menu is displayed. local date and time is displayed. 3. Use the Arrow buttons on the 3. Use the Arrow buttons on the remote to highlight RESET & 4. Highlight Time Zone and pressremote OK. The to highlightTIME ZONE Time menu & is displayed. To enable, disable, or adjust CEC settings: ADMIN and press OK. The RESET & ADMIN menu is displayed. Local Settings and press OK. 5. Highlight your time zone and press OK. 1. Set up your audio device and connect it to the HDMI-1(HDMI The menu headed by the local 4. Highlight Power Indicator and press OK. 6. Highlight Daylight Saving Timedate and timepress is OKdisplayed.. The DAYLIGHT SAVING TIME menu is Arc) input on the TV displayed. Choose On if it is currently Daylight Savings Time, Off if it is Standard Time, or 2. On your audio device, select the HDMI ARC input. 5. Use the Up/Down Arrow buttons to select On or Off, then Auto to have the system automatically4. Highlight detect Time ZoneDaylight and Savings press Settings. OK. The TIME ZONE menu is press OK. 3. Press the Menu button on the remote. The on-screen menu is 7. Press the Exit button on the remote.displayed. displayed. 5. Highlight your time zone and press OK. Adjusting the CEC Settings 4. Use the Arrow buttons on the remote to highlight System and 6. Highlight Daylight Saving Time and press OK. The DAYLIGHT press OK. The SYSTEM menu is displayed. SAVING TIME menu is displayed. Choose On if it is currently The CEC function on your TV enables you to control devices connected to HDMI (ARC) input with the 5. Use the Arrow buttons on the remote to highlight CEC and Daylight Savings Time, Off if it is Standard Time, or Auto to included remote, without any programming. Using CEC, your VIZIO TV remote can control: press OK. The CEC menu is displayed. have the system automatically detect Daylight Savings Settings. • Power On/Off 6. Highligh CEC and press OK. Select a setting and then press OK. 7. Press the Exit button on the remote. • Volume • CEC - To use CEC, you must select Enable. • Mute • Device Discovery - To determain if your device is To enable, disable, or adjust CEC settings: connected and supports CEC, select Device Discovery and then press OK.

7. Press the Exit button on the remote. 1. Set up your audio device and connect it to the HDMI-1(HDMI Arc) input on the TV 2. On your audio device, select the HDMI ARC input. 3. Press the Menu button on the remote. The on-screen menu is displayed. 4. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed. 5. Use the Arrow buttons on the remote to highlight CEC and press OK. The CEC menu is 29 displayed. 6. Highligh CEC and press OK. Select a setting and then press OK. • CEC - To use CEC, you must select Enable. • Device Discovery - To determain if your device is connected and supports CEC, select Device Discovery and then press OK. 7. Press the Exit button on the remote.

Owner’s Manual - Model FSN On Screen Menu | Picture Settings | 41 Turning the Power Indicator On or Off

The Power Indicator on the front of your TV normally does not glow when the TV is on. You can change this setting if you prefer the light to be on. To turn the Power Indicator Light On or Off:

1. Press the Menu button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM 3 menu is displayed. 3. Use the Arrow buttons on the remote to highlight RESET & ADMIN and press OK. The RESET & ADMIN menu is displayed. Changing the Display Name 4. Highlight Power Indicator and press OK. Naming your TV helps differentiate it from other cast devices you may have in your home. 5. Use the Up/Down Arrow buttons to select On or Off, then press OK. To view your TV name:

Changing the Display Name 1. Press the Menu button on the remote. The on-screen menu is displayed. Naming your TV helps differentiate it from other cast devices you may have in your home. 2. Use the Arrow buttons on the remote to highlight System and To view your TV name: press OK. The SYSTEM menu is displayed.

3. Use the Arrow buttons on the remote to highlight TV Name 1. Press the Menu button on the remote. The on-screen menu is displayed. and press OK. The Display Name is displayed. 2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed. 4. Enter your custom name using the on-screen keyboard. 3. Use the Arrow buttons on the remote to5. highlight Press the TV ExitName button and press on the OK remote.. The Display Name is displayed. 4. Enter your custom name using the on-screen keyboard. 5. Press the Exit button on the remote. Display Name Back

Living Room Family Room

a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9 .@# äêí Space

Cancel

30 3 Accessibility Settings The Accessibility Menu ACCESSIBILITY SETTINGS USING THE RESET & ADMIN MENU Restoring the TV to Factory Default Settings VIZIO is committed to providing intuitive, user-friendly All of the on-screen menu settings can be reset to the factory Your new TV offers several accessibility features that can help you get the most out of it. You can use the TV’s RESET & ADMIN menu to restore the TV to its products. Your new VIZIO TV offers several accessibility defaults. factory default settings as well as access other system settings. To access the ACCESSIBILITYfeatures menu: that can help you get the most out of it. Using the RESET & ADMIN, you can: If you restore the TV to the factory default settings, all changes you have made to the settings will be lost! To access the ACCESSIBILITY menu: 1. Press the Menu button on the remote control. • Reset the TV to factory This includes any wireless or picture settings. 1. Press the button on the settings Reset & Admin Back 2. Use the Arrow and OK buttons to navigateMenu and select System remote control. Back • Force the system to power Reset to Factory Defaults then Accessibility. Accessibility To restore the TV to its factory default settings: off and on Soft Power Cycle 3. Talk Back - Turn Text-to-Speech2. Use Talk the Back Arrow On orand Off OK. Text-tobuttons Talk Back Off • Create a system pin code Power Indicator On 1. Press the Menu button on the remote. The on-screen menu is Speech Talk Back enables yourto TV navigate to speak andall settings select changesSystem à Speech Rate Normal Accessibility. to lock content and picture System PIN Code displayed. and adjustments using the remote in English. Zoom mode Off settings USB Power Always On 4. Speech Rate - Adjusts the3. rateTalk inBack which - Turn Text-to-Speech Text-to-Speech is 2. Use the Arrow buttons on the remote to highlight System and • Enable or disable program Viewing Data On spoken. Select Slow, Normal Talk(Default), Back Onor Fastor Off. . press OK. The SYSTEM menu is displayed. offers and suggestions VIZIO Privacy Policy Text-to-Speech Talk Back 5. Zoom Mode - Enlarges a section of the screen by approximately 200%. 3. Highlight Reset & Admin and press OK. The RESET & ADMIN enables your TV to speak • Enable or disable anonymous Store Demo menu is displayed. all settings changes and debug data for system To access the Closed Caption**adjustments menu: using the remote in performance. 4. Highlight Reset to Factory Defaults and press OK. If you have English. • Start or stop the Store Demo changed the set system PIN, enter it now. Mode 4. Speech Rate* - Adjusts the 1. Press the Menu button on the remote control. The TV displays, “Select Reset to restore all TV settings to rate in which Text-to-Speech is factory defaults and clear all account information.” 2. Use the Arrow and OK buttonsspoken. to navigate Select and Slow select, Normal Closed Captions. (Default), or Fast. 5. Highlight Reset and press OK. To access the Video Description**5. Zoom menu: Mode - Enlarges a section 6. Wait for the TV to turn off. The TV will turn back on shortly of the screen by approximately afterward and the Setup App will begin. 200%. 1. Press the Menu button on the remote control. To access the Closed Caption** menu: 2. Use the Arrow and OK buttons to navigate and select Settings then Channel then Digital Audio then Spanish/ Video Description.• Press the Menu button on the remote control. • Use the Arrow and OK buttons to navigate and select Closed Captions.

To access the Video Description** menu: • Press the Menu button on the remote control. • Use the Arrow and OK buttons to navigate and select Settings à Channel à Digital Audio à Spanish/ Video Description. 31

Owner’s Manual - Model FSN On Screen Menu | Picture Settings | 43 3 Using The Reset & Admin Menu ACCESSIBILITY SETTINGS The Reset & Admin Menu USING THE RESET & ADMIN MENU Restoring the TV to Factory Default Settings VIZIO is committed to providing intuitive, user-friendly All of the on-screen menu settings can be reset to the factory You can use the TV’s RESET & ADMIN menu to restore the TV to its products. Your new VIZIO TV offers severalYou can accessibility use the TV’s RESET & ADMIN menu to restore the TV to its factory default settings as well as defaults. factory default settings as well as access other system settings. features that can help you get the mostaccess out of other it. system settings. If you restore the TV to the factory default settings, Using the RESET & ADMIN, youUsing can: the RESET & ADMIN, you can: all changes you have made to the settings will be lost! To access the ACCESSIBILITY menu: • Reset the TV to factory • Reset the TV to factory settings This includes any wireless or picture settings. 1. Press the Menu button on the settings Reset & Admin Back • Force the system to power off and on remote control. Back • Force the system to power Reset to Factory Defaults Accessibility To restore the TV to its factory default settings: • Create a system pin codeoff to lockand oncontent and Soft Power Cycle 2. Use the Arrow and OK buttons Talk Back Off picture settings Power Indicator On 1. Press the Menu button on the remote. The on-screen menu is to navigate and select System à Speech Rate Normal • Create a system pin code Accessibility. to lock content and picture System PIN Code displayed. Zoom mode• Enable or disable Off program offers and suggestions settings USB Power Always On 3. Talk Back - Turn Text-to-Speech • Enable or disable anonymous debug data for 2. Use the Arrow buttons on the remote to highlight System and • Enable or disable program Viewing Data On Talk Back On or Off. system performance press OK. The SYSTEM menu is displayed. offers and suggestions VIZIO Privacy Policy Text-to-Speech Talk Back • Start or stop the Store Demo Mode 3. Highlight Reset & Admin and press OK. The RESET & ADMIN enables your TV to speak • Enable or disable anonymous Store Demo menu is displayed. all settings changes and debug data for system adjustments using the remote in performance. 4. Highlight Reset to Factory Defaults and press OK. If you have English. Restoring the TV to Factory Default• Start Settingsor stop the Store Demo changed the set system PIN, enter it now. Mode 4. Speech Rate* - Adjusts the The TV displays, “Select Reset to restore all TV settings to rate in which Text-to-Speech is All of the on-screen menu settings can be reset to the factory defaults. factory defaults and clear all account information.” spoken. Select Slow, Normal To restore the TV to its factory default settings: (Default), or Fast. 5. Highlight Reset and press OK.

5. Zoom Mode - Enlarges a section 1. Press the Menu button on the remote. The on-screen menu is displayed. 6. Wait for the TV to turn off. The TV will turn back on shortly of the screen by approximately afterward and the Setup App will begin. 200%. 2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed. To access the Closed Caption** menu: 3. Highlight Reset & Admin and press OK. The RESET & ADMIN menu is displayed. • Press the Menu button on the remote control. 4. Highlight Reset to Factory Defaults and press OK. If you have changed the set system PIN, • Use the Arrow and OK buttons to navigate and select Closed enter it now. The TV displays, “Select Reset to restore all TV settings to factory defaults and Captions. 3 clear all account information.” 5. Highlight Reset and press OK. To access the Video Description** menu: ACCESSIBILITY SETTINGS USING THE RESET & ADMIN MENU Restoring the TV to Factory Default Settings • Press the Menu button on the remote6. Waitcontrol. for the TV to turn off. The TV will turn back on shortly afterward and the Setup App will VIZIO is committed to providing intuitive, user-friendly All ofbegin. the on-screen menu settings can be reset to the factory You can use the TV’s RESET & ADMIN •menu Use the to Arrowrestore and the OKTV tobuttons its to navigate and select products. Your new VIZIO TV offers several accessibility defaults. factory default settings as well as accessSettings other system à Channel settings. à Digital Audio à Spanish/ Video features that can help you get the most out of it. Description. Using the RESET & ADMIN, you can: If you restore the TV to the factory default settings, all changes you have made to the settings will be lost! To access the ACCESSIBILITY menu: 31 • Reset the TV to factory This includes any wireless or picture settings. 1. Press the Menu button on the settings Reset & Admin Back remote control. Back • Force the system to power Reset to Factory Defaults Accessibility To restore the TV to its factory default settings: off and on Soft Power Cycle 2. Use the Arrow and OK buttons Talk Back Off Power Indicator On 1. Press the Menu button on the remote. The on-screen menu is to navigate and select System à Speech Rate Normal • Create a system pin code Accessibility. to lock content and picture System PIN Code displayed. Zoom mode Off settings USB Power Always On 3. Talk Back - Turn Text-to-Speech 2. Use the Arrow buttons on the remote to highlight System and • Enable or disable program Viewing Data On Talk Back On or Off. press OK. The SYSTEM menu is displayed. offers and suggestions VIZIO Privacy Policy Text-to-Speech Talk Back 3. 44Highlight Reset & Admin and press OK. The RESET & ADMIN All Rights Reserved. SkyVue® enables your TV to speak • Enable or disable anonymous Store Demo menu is displayed. all settings changes and debug data for system adjustments using the remote in performance. 4. Highlight Reset to Factory Defaults and press OK. If you have English. • Start or stop the Store Demo changed the set system PIN, enter it now. Mode 4. Speech Rate* - Adjusts the The TV displays, “Select Reset to restore all TV settings to rate in which Text-to-Speech is factory defaults and clear all account information.” spoken. Select Slow, Normal (Default), or Fast. 5. Highlight Reset and press OK. 5. Zoom Mode - Enlarges a section 6. Wait for the TV to turn off. The TV will turn back on shortly of the screen by approximately afterward and the Setup App will begin. 200%. To access the Closed Caption** menu: • Press the Menu button on the remote control. • Use the Arrow and OK buttons to navigate and select Closed Captions.

If you reset the TV, the on-screen instructions will guide you through each of the steps necessary to get your TV ready for use. The first time you turn on the TV, the on-screen instructions will guide you through each of the steps necessary to get your TV ready for use: Before you begin the setup: Before you begin the first-time setup: • Your Television should be installed and the power cord should be connected to an electrical outlet. • Your Television should be installed and the power cord should be connected to an electrical outlet. •• If you have aa wireless network,network, havehave thethe networknetwork password password ready. ready. •• If you are connecting toto youryour networknetwork withwith anan EthernetEthernet cable,cable, connect connect it itto to the the Ethernet Ethernet port port on on the Television. Completingthe Television. Setup after factory reset Completing Setup after factory reset

The first time you turn on the TV, the on-screen instructions will guide you through each of the steps necessary to get your TV ready for use:

The first time you turn on the TV, the on-screen instructionsBefore you wibeginll guide the you first-time through setup:each of the steps necessary to get your TV ready for use: • Your Television should be installed and the power cord should be connected to an electrical outlet. Before you begin the first-time setup: • If you have a wireless network, have the network password ready. • Your Television should be installed and the power cord should be connected to an electrical outlet. • If you are connecting to your network with an Ethernet cable, connect it to the Ethernet port on the Television. • If you have a wireless network, have the network password ready. • If you are connecting to your network with an Ethernet cable, connect it to the Ethernet port on the Television.

1. Choose your language. 2. Choose home use. 3. Choose your country. 4. Choose your Wi-Fi and enter the password.

5. Name your TV. 6. Scan for channels. 7. Accept the T&Cs and register your device. All set!

5. Name your TV. 6. Scan for channels. 7. Accept the T&Cs and register your device. All set! 11 Model FSN 45 Owner’s Manual - On Screen Menu | Picture Settings | 11 Completing Setup after factory reset

The first time you turn on the TV, the on-screen instructions will guide you through each of the steps necessary to get your TV ready for use: Before you begin the first-time setup: • Your Television should be installed and the power cord should be connected to an electrical outlet. • If you have a wireless network, have the network password ready. • If you are connecting to your network with an Ethernet cable, connect it to the Ethernet port on the Television.

1. Choose your language. 2. Choose home use. 3. Choose your country. 4. Choose your Wi-Fi and enter the password. 3 Setup After Factory Reset (continued)

SET SYSTEM PIN ABOUT VIEWING DATA You can set a System Pin to use: Video ACR collects data related to publicly available content 1. Picture mode lock displayed on your television/display, such as the identity of your broadcast, cable, or satellite television provider, and the televi- 2. Parental controls sion programs and commercials viewed (including time, date, 3. Reset to TV to factory default setting channel, and whether you view them live or at a later time). We also collect unique identifiers about this TV, including the IP ad- The first time you select System PIN code, you will enter a PIN. dress. This data is collectively referred to as “Viewing Data.” For 5. Name your TV. 6. Scan for channels. 7. Accept the T&Cs and register your device. All set! The next time you open System PIN code you can reset your more information about Viewing Data and how VIZIO protects PIN code. Set System Pin its customers’ privacy, please consult our privacy policy at www. vizio.com/privacy. 11

You can set a System Pin to use: System PIN code Back When ACR collection is turned on, we may share Viewing Data Change the PIN used for the System PIN. with authorized data partners including analytics companies, • Picture mode lock media companies and advertisers. VIZIO and its authorized data partners use Viewing Data to generate summary analysis and • Parental controls New PIN reports of how users engage with content on their TVs and other • Reset to TV to factory default setting devices. VIZIO Viewing Data is sometimes enhanced with house- The first time you select System PIN code, you will enter a PIN. The hold demographic data and data about digital actions (e.g. digital Confirm PIN next time you open System PIN code you can reset your PIN code. purchases and other consumer behavior taken by devices associated with the IP Address we collect). Viewing Data also enables Cancel our authorized data partners to deliver advertising relevant to your profile that you might find useful, both on the VIZIO TV/ Enter the 4-digit PIN using the numbers keys on the remote. display and other devices sharing your IP Address. Viewing Data is also used to help content publishers, broadcasters or content About Viewing Data distribution services create or recommend more relevant entertainment based on summary insights, as well as helps us improve the design of our products, software and services. Video ACR collects data related to publicly available content displayed on your television/display, such as the identity of your broadcast, cable, or satellite television provider, and the television programs and commercials viewed (including time, date, channel, and whether you view them live or at a later time). We also collect unique identifiers about this TV, including the IP You can easily turn this feature On or Off in the RESET & ADMIN address. This data is collectively referred to as “Viewing Data.” For more information about Viewing Data and how VIZIO protects menu. If you have trouble enabling or disabling Viewing Data, its customers’ privacy, please consult our privacy policy at www.vizio.com/privacy. please contact SKYVUE customer service by emailing [email protected] When ACR collection is turned on, we may share Viewing Data with authorized data partners including analytics companies, or calling (877) 475-9883 option 2. media companies and advertisers. VIZIO and its authorized data partners use Viewing Data to generate summary analysis and reports of how users engage with content on their TVs and other devices. VIZIO Viewing Data is sometimes enhanced with household demographic data and data about digital actions (e.g. digital purchases and other consumer behavior taken by devices associated with the IP Address we collect). Viewing Data also enables our authorized data partners to deliver advertising relevant to your profile that you might find useful, both on the VIZIO TV/display and other devices sharing your IP Address. 33 Viewing Data is also used to help content publishers, broadcasters or content distribution services create or recommend more relevant entertainment based on summary insights, as well as helps us improve the design of our products, software and services.

You can easily turn this feature On or Off in the RESET & ADMIN menu. If you have trouble enabling or disabling Viewing Data, please contact SKYVUE customer service by emailing [email protected] or calling (877) 475-9883 option 2.

The Info Window can be displayed by pressing the Info button on the remote:

• Press the Info button one time to display the TV name, current input, picture mode, network name, and time.

Current Input Picture Mode Network Name

TV Name Time

Owner’s Manual - Model FSN On Screen Menu | Picture Settings | 47 SmartCast TV™ What is Vizio SmartCast TV™?

SmartCast TV lets you discover, stream, and control your content like never before. Access top apps like Netflix more easily, using the included remote to browse and launch content directly from the big screen. SmartCast TV makes finding something to watch more fun - discover new shows, including movies in 4K UHD. Plus, you can quickly set up and adjust settings right on the TV using the included remote control.

What can you do with SmartCast TV™?

• Browse and launch top tier apps directly from the big screen using the included remote. • Stream content directly from the home screen with a single button press. • Stream high quality entertainment in 4K and HDR10. • Initiate a stream with the included IR remote, pause with mobile app, continue controlling with voice via Google Home.

How to access the SmartCast TV™ ?

To acess and begin streaming with SmartCast TV:

• Select SmartCast from the list of inputs.

Displaying USB Media PreparingYou can Your connect USB a DriveUSB thumb to Play drive USB to Media your TV to play videos. Removing the USB Drive from the TV To TV USB media, you must first save your videos onto a USB thumb To safely remove your USB drive from the TV: Connect a USB thumb drive to your TV to play videos. drive:Preparing Your USB Drive to Play USB Media 1. Turn off the TV. • The USB thumb drive must be formatted as FAT32. •To FilesTV USB on themedia, USB youthumb must drive first must save end your in a videossupported onto file a USB thumb2. Disconnectdrive: your USB thumb drive from the USB port on the extension ( .mp4 only). side of the TV. • The USB thumb drive must be formatted as FAT32. • The player is not designed to play media from external hard drives,• Files MP3 on players,the USB cameras, thumb driveor smartphones. must end in a supported file extension (.mp4 only). Do not remove the USB thumb drive while the TV is on. Displaying USB Media • The player is not designed to play media from external hard drives, MP3Doing so may damage the drive. To display yourplayers, USB cameras, media: or smartphones.

1.Displaying Connect your USB USB Media thumb drive to the USB port on the side of the TV.

2. TheTo display TV will recognize your USB the media: USB stick and begin playing conent on its own.

-OR-1. Connect your USB thumb drive to the USB port on the side of the TV. 2. The TV will recognize the USB stick and begin playing conent on its own. Select-OR USB from the bottom streaming icons on the SmartCast Homepage. 3. Select USB from the bottom streaming icons on the SmartCast Homepage.

You can display your photos in Fullscreen. Select the Playing USB Media photo, press OK, then highlight Fullscreen and press 4 OK.

Displaying USB Media Preparing Your USB Drive to Play USB Media RemovingRemoving the the USB USB Drive Drive from from the TV the TV To TV USB media, you must first save your videos onto a USB thumb To safely remove your USB drive from the TV: Connect a USB thumb drive to your TV to play videos. drive: 1. ToTurn safely off removethe TV. your USB drive from the TV: • The USB thumb drive must be formatted as FAT32. • Files on the USB thumb drive must end in a supported file 2. Disconnect1. Turn off your the TV.USB thumb drive from the USB port on the side of the TV. extension ( .mp4 only). 2. Disconnect your USB thumb drive from the USB port on the side of the TV. • The player is not designed to play media from external hard drives, MP3 players, cameras, or smartphones. Note: The image shown here is for illustrative purposes only and may be subject to change. The actual number of portsDo and not their remove locations may the vary, USB depending thumb on drive the model. while the TV is on. Displaying USB Media Doing so may damage the drive. 36 To display your USB media:

1. Connect your USB thumb drive to the USB port on the side of the TV.

2. The TV will recognize the USB stick and begin playing conent on its own.

Owner’s Manual - Model FSN On Screen Menu | Picture Settings | 49 -OR-

Select USB from the bottom streaming icons on the SmartCast Homepage.

You can display your photos in Fullscreen. Select the photo, press OK, then highlight Fullscreen and press OK.

Note: The image shown here is for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary, depending on the model. 36 4 USB Media (continued)

Now Playing Information Back Button displays song title, album title, and artist name. Highlight this button and Album Art Progress Bar press OK to return to If included on the USB displays the duration of the current - the previous screen. thumb drive and associated ly-playing song. The blue bar will with your music, the album lengthen as the song progresses. art will display here. Connected Sources Fab Apple Dream displays On The Answer Is Yes Music By Ana Banana connected USB USB1: MyFlashDrive 5:50 8:46 devices. MyFlashDrive\Audio\root\My Music # Track Album Artist Duration 1 Starry Summer Summer Mix JCheesy 2:42 Current Folder 2 Downspin Summer Mix JCheesy 6:20 My Music 3 Mango Dream Beach Mix Ana Banana 8:46 4 Crystal Waters Beach Mix The Dash 4:21 Playback Controls 5 Smooth Waves Breezy Mix Rio Steve 7:58 Use to control audio playback. Highlight Play/ Pause, Previous, or Next Folder Contents/ and press OK . Playlist Toggle Media Browse This area displays Sort by Album/Artist/ the contents of the Sort: Artist A-Z Track currently selected View: All folder. You can browse

the Arrow and OK Page 1 of 1 buttons on the remote.

Toggle between Page Information 4 viewing all content If your USB thumb drive has more and only viewing folders. single screen, the page information is displayed here.

Back Button Highlight this button and MUSIC PLAYER press OK to return to 37 the previous screen.

Connected Sources displays Video connected USB USB1: MyFlashDrive devices. MyFlashDrive\Video\root\My Videos # File Date Duration 1 Family Vacation - California - 00:23:43 Current Folder 2 26th Birthday Party - 00:38:18 My Videos 3 Japan 2017 - 00:41:08 4 Aby’s Graduation - 00:05:32

Folder Contents/ Playlist This area displays Sort by Date the contents of the Sort: Date New-Old or File Name currently selected View: Folders folder. You can browse among files using the Arrow and Page 1 of 1 OK buttons on the remote. View All or Page Information View Folders If your USB thumb drive has more files than can be displayed on a single screen, the page information is displayed here.

• Make sure the batteries are properly inserted matching the - and + symbols. • Replace the batteries with fresh ones.

The TV displays “No Signal”

• Press INPUT button on the remote control to select a different input source. • If you are using cable TV or antenna connected directly to the TV, scan for channels. See Scanning for Channels.

There is no power

• Ensure the TV is plugged into a working electrical outlet. • Ensure the power cable is securely attached to the TV. • Press the Power/Standby button on the remote or on the back of the TV to turn the TV on.

The power is on, but there is no image on the screen

• Ensure all cables are securely attached to the TV. • Ensure all devices are connected correctly. Devices differ; see your device’s user manual for details. • Adjust Brightness, Contrast, or Backlight. See Adjusting the Picture Settings. • Press the INPUT button on the remote to select a different input source

There is no sound

• Press Volume Up on the remote control. • Press the MUTE button on the remote to ensure mute is off. • Check the audio settings. See Adjusting the Audio Settings. • Check the audio connections of external devices (Blu-ray player, game console, cable/satellite box) that are connected to the TV. • If you are using an antenna, the signal strength of the channel may be low. Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal.

The sound is flat or dialog is not audible

• Turn off Volume Leveling. See Adjusting the Audio Settings.

Owner’s Manual - Model FSN Troubleshooting and Legal Information | 51 The colors on the TV don’t look right

• Adjust the Color and Tint settings in the Picture menu. See Adjusting the Picture Settings. • Select a pre-set picture mode. See Adjusting the Picture, SKYVUE recommends selecting Vivid. • Check all cables to ensure they are securely attached.

The buttons on the remote aren’t working

• Ensure you are only pressing one button at a time. • Point the remote directly at the TV when pressing a button. A • Replace the remote batteries with new ones. See Replacing the Batteries

HELP TOPICS The image quality is not good The remote is not responding. There is no sound. The image quality is not good. • Make sure the batteries are properly inserted matching • Press Volume• For Up theon thebest remote image control.quality, view high-definition programs• For using the digitalbest image sources. quality, Connect view high-definitionyour programs the - and + symbols. • Press the MUTEdevices button with on HDMIthe remote cables. to ensure mute is off. using digital sources. Connect your devices with HDMI • Replace the batteries with fresh ones. cables. • Check the• audio If you settings. are using See an Adjusting antenna, thethe Audiosignal Settings.strength of the channel may be low. Ensure your antenna is • If you are using an antenna, the signal strength of the • Check the audioconnected connections securely of externalto the TV devices and move (Blu-ray the antenna around channel may be low. Ensure your antenna is connected The TV displays “No Signal.” player, game console, cable/satellite box) that are securely to the TV and move the antenna around the • Press INPUT button on the remote control to select a different connected to the TV. room or close to a window for the best signal. input source. • If you areThe using picture an antenna, is distorted the signal strength of the channel may be low. Ensure your antenna is connected • If you are using cable TV or antenna connected directly to the The picture is distorted. securely to the TV and move the antenna around the TV, scan for channels. See Scanning for Channels. • Move the TV away from electrical appliances, cars, and fluorescent• Move the lights. TV away from electrical appliances, cars, and room or close to a window for the best signal. There is no power. • Ensure all cables are securely attached. fluorescent lights. • Ensure the TV is plugged into a working electrical outlet. • Ensure all cables are securely attached. • Ensure the power cable is securely attached to the TV. The sound is flat or dialog is not audible. The display image does not cover the entire screenThe display image does not cover the entire screen. • Press the Power/Standby button on the remote or on the • Turn off Volume Leveling. See Adjusting the Audio back of the TV to turn the TV on. Settings. • If you are using TV, AV, or Component with 480i input, • If you are using TV, AV, or Component with 480i input, press viewpress mode the ( )button button on the remoteremote to change the screen to change the screen mode. mode. The power is on, but there is no image on the screen. The colors on the TV don’t look right. • Ensure all cables are securely attached to the TV. • Adjust the Color and Tint settings in the Picture menu. See Adjusting the Picture Settings. The TV has pixels (dots) that are always dark. • Ensure all devices are connected correctly. Devices differ; The TV has pixels (dots) that are always dark • Your HD TV is precision-manufactured using an extremely • Select a pre-set picture mode. See Adjusting the Picture see your device’s user manual for details. high level of technology. However, sometimes pixels may Settings. SKYVUE recommends selecting Calibrated. • Adjust Brightness, Contrast, or Backlight. See Adjusting • Your HD TV is precision-manufactured using an extremelynot high display level correctly.of technology. These However, types of occurrences are the Picture Settings. • Check all cables to ensure they are securely attached. sometimes pixels may not display correctly. These types of occurrencesinherent to are this inherent type of to product this type and of do not constitute a defective product. • Press the INPUT button on the remote to select a product and do not constitute a defective product. Please call our Tech Support Team for additional The buttons on the remote aren’t working. different input source. information. 877-475-9883 ext. 2. • Ensure you are only pressing one button at a time. • Point the remote directly at the TV when pressing a button. • Replace the remote batteries with new ones. See Replacing 52the Batteries. All Rights Reserved. SkyVue®

40 I see “noise” or static on the screen

• When your TV’s digital capabilities exceed a digital broadcast signal, the signal is up-converted (improved) to match your TV’s display capabilities. This up-converting can sometimes cause irregularities in the image. • If you are using an antenna, the signal strength of the channel may be low. Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal.

When I change input source, the display image changes size.

• The TV remembers the viewing mode on each input source. If the viewing mode on the new input source differs from the one on the input source you switch from, the difference may be noticeable. • See Changing the Screen Aspect Ratio.

When I change input source, the display image changes size.

• Make sure your phone or tablet is connected to a Wi-Fi network. Open a browser on your phone or tablet. Navigate to vizio.com/smartcastapp and follow the on-screen instructions to download the VIZIO SmartCast™ App.

How do I change the Inputs?

• Make sure the VIZIO SmartCast™ App is installed on your phone or tablet. Open the VIZIO SmartCast™ App. Tap on the Device list and select your TV. Tap on the Input key and select the Input of your choice. • Press the Input button on the back of the Display to cycle through the Inputs. • Press the Input button on the basic remote to cycle through the Inputs.

How do I connect to my Wi-Fi network?

• On your IR remote, press the Menu button then go to Network > Select your Wi-Fi name > Enter password. • Open the VIZIO SmartCast™ App on your phone or tablet. Tap on the device list and select your Display. Tap on the Settings icon Network > Wireless Access Points. • Select your Wi-Fi network from the list, enter the Wi-Fi password, and tap Connect.

Owner’s Manual - Model FSN Troubleshooting and Legal Information | 53 How do I stream apps like Netflix and Youtube to my VIZIO SmartCast™ Display?

• Download and open a Chromecast-enabled apps on your mobile device, such as like Netflix or Youtube. Then tap the Cast button.

How do I exit Demo Mode

• Press and hold the Input button on the back of the Display to exit the demo mode.

How do I watch Cable/Antenna TV channels?

• If you subscribe to cable or satellite, simply connect an HDMI cable (not included) to the receiver. • If you use external antennas to watch local broadcast channels, a TV tuner is required and is sold separately by third parties.

Regulatory Information FCC Class B Radio Interference Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Notice

The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.

Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.

Caution

Always use an AC/DC power adapter that is properly grounded. Use the AC cords listed below for each area.

Canada Notice for License-Exempt Radio Apparatus

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device operates on a no-protection no-interference basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio license is required. Please consult Industry Canada’s document CPC-2-1-28, Optional Licensing for Low-Power Radio Apparatus in the TV Bands, for details. Cet appareil est conforme aux CNR exempts de licence d’Industrie Canada. . Son fonctionnement est sujet aux deux conditions suivantes: 1. le dispositif ne doit pas produire de brouillage préjudiciable, et 2. ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable

Cet appareil fonctionne sur une base sans protection et sans interférence. Dans le cas où l’utilisateur cherche à obtenir de la protection des autres services de radio fonctionnant sur les mêmes bandes TV, aucune license est requise. Veuillez consulter le document CPC-2-1-28 d’Industrie Canada, License optionnelle pour les appareils radio de faible puissance, pour plus de détails.

Industry Canada Class B emission compliance statement This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Declaración de México

La operación de este equipo está sujeta a las siguientes dos condiciones: 1. es posible que este equipo o dispositivo no cause interferencia perjudicial y 2. este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.

Owner’s Manual - Model FSN Troubleshooting and Legal Information | 55 Legal Information Software Licenses

All software is provided subject to a software license agreement(s) and you agree that you will be bound by such license agreement(s) in addition to these terms. Your use of this product is subject to VIZIO’s privacy policy, which may be updated from time to time, and is available to view at http://www.vizio.com/privacy.

Export Regulations

Customer acknowledges that the VIZIO products, which include technology and software, are subject to customs and export control laws in the United States (“US”). The products may also be subject to the customs and export control laws and regulations of the Legal Information country in which the products are manufactured and/or received. D Internet Connectivity

Network conditions, environmental and other factors may negatively affect connectivity and the resulting video quality, if any. The applications and content of the applications pictured herein or described in accompanying documentation may only be available Software Licenses in certain countries or languages, may require additional fees or subscription charges, and maydevice be subjectwith a tovoltage future converterupdates, kit sold for appliances. All software is provided subject to a software license agreement(s) and modificationsSKYVUE, the or discontinuationSKYVUE logo, without and notice.other VIZIOterms has and no controlphrases over are third party applications or content and assumes no responsibility for the availability or interruption of such applications or content. Additional third party terms, conditions and restrictions you agree that you will be bound by such license agreement(s) in addition trademarks or registered trademarks of SKYVUE Putdoor TV, Inc. to these terms. Your use of this product is subject to VIZIO’s privacy policy, apply. Battery Disposal which may be updated from time to time, and is available to view at A GoogleVIZIO, accountthe VIZIO is required logo, to the download V logo, applications and other from theterms Google and Play phrases store. A MyVIZIO are account is requiredCaution: to access certainThis product may be shipped with batteries. Do http://www.vizio.com/privacy. featurestrademarks of the VIZIO or registered SmartCast™ trademarks App. of VIZIO, Inc. not dispose of batteries in a fire or with ordinary household Information in this User Manual is subject to change without notice. waste. Batteries may explode and can cause damage. HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are Export Regulations All reasonable efforts have been made to ensure the accuracy of the information provided herein. All productReplace specifications, batteries only with the same or equivalent type Customer acknowledges that the VIZIO products, which include functionalitytrademarks features, or registered configurations, trademarks performance, of HDMI design Licensing and other LLC.product information describedof battery herein recommendedare subject to change by SKYVUE. The disposal of batteries may be technology and software, are subject to customs and export control withoutFor DTS notice. patents, SKYVUE see is not http://patents.dts.com. responsible for typographical, Manufactured technical, or descriptiveunder license errors. regulated by your state. Please always check with your state to determine laws in the United States (“US”). The products may also be subject to the SKYVUE,from DTS, the SKYVUE Inc. DTS, logo, the and Symbol, other terms DTS and and phrases the Symbol are trademarks together, or registered and DTS trademarks the howof SKYVUE to properly Outdoor dispose TV, Inc. of your batteries. customs and export control laws and regulations of the country in which VIZIO,Studio the SoundVIZIO logo, II are the registered V logo, and trademarksother terms and and/or phrases trademarks are trademarks of DTS,or registered Inc. trademarks of VIZIO, Inc. the products are manufactured and/or received. in the United States and/or other countries. © DTS, Inc. All Rights Reserved. Product Recycling HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registeredThe trademarksdisposal andof HDMI recycling Licensing of consumer electronic products may be Internet Connectivity LLC.Manufactured under license from Dolby Laboratories. Dolby, Dolby regulated by your state. Always properly dispose of your SKYVUE products Audio, Dolby Vision, and the double-D symbol are trademarks of Dolby Network conditions, environmental and other factors may negatively For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS,in the accordance Symbol, DTS with and thelocal Symbol laws and regulations. SKYVUE supports the proper Laboratories. Confidential unpublished work. Copyright © 2013-2015 affect connectivity and the resulting video quality, if any. together, and DTS Studio Sound II are registered trademarks and/or trademarks of DTS, Inc. recyclingin the United of ourStates products. and/or other Dolby Laboratories. All rights reserved. countries. © DTS, Inc. All Rights Reserved. The applications and content of the applications pictured herein or described in accompanying documentation may only be available Manufactured© 2017 Google under Inc.license All fromrights Dolby reserved. Laboratories. Google Dolby, Cast Dolby is a Audio,trademark Dolby Vision,of and the double-D symbol are trademarks in certain countries or languages, may require additional fees or of GoogleDolby Laboratories. Inc. Confidential unpublished work. Copyright © 2013-2015 Dolby Laboratories.Packaging All rights Disposal reserved. subscription charges, and may be subject to future updates, modifications © 2017 Google Inc. All rights reserved. Google Cast is a trademark of Google Inc. SKYVUE encourages the recycling of the packaging used for this product. or discontinuation without notice. VIZIO has no control over third party Other names of companies, products, and services used in this User Please break-down all boxes and recycle eligible materials according to applications or content and assumes no responsibility for the availability OtherManual names may of companies, be trademarks, products, andtrade services names used or in thisservice User Manualmarks may of beothers trademarks, local trade laws names and or regulations. service marks of or interruption of such applications or content. Additional third party othersand and VIZIO, VIZIO, Inc. Inc. disclaims any any interest interest in trademarks, in trademarks, trade names trade or service names marks or other than its own. Mention of non-VIZIO terms, conditions and restrictions apply. A Google account is required to productsservice is marksfor informational other than purposes its own. only. Mention of non-VIZIO products is for download applications from the Google Play store. A MyVIZIO account is informational purposes only. Warning: To reduce risk of electric shock, fire or damage to your device or other property, do not attempt to power the required to access certain features of the VIZIO SmartCast™ App. Caution:Caution: AvoidAvoid exposing exposing a drive a drive to magnetic to magnetic fields. fields.Security devicesSecurity with magnetic fields may include airport walk-through devices and security wands. Airport conveyor belts or similar security devices that check carry-on devicesluggage with generally magnetic use X-rays fields and shouldmay include not cause airport magnetic walk-through damage to drives. If you are traveling internationally, Information in this User Manual is subject to change without notice. devicescheck theand customs security regulations wands. forAirport device conveyor use for each belts country or similar you will visit, and check the power cord and securityadapter devicesrequirements that for check each locationcarry-on in whichluggage you plangenerally to use usethe display as voltage, frequency and plug X-raysconfigurations and should may not vary. cause magnetic damage to drives. All reasonable efforts have been made to ensure the accuracy of the If you are traveling internationally, check the customs regulations for information provided herein. All product specifications, functionality device use for each country you will visit, and check the power cord and features, configurations, performance, design and other product information adapter requirements for each location in which you plan to use the described herein are subject to change without notice. 56display as voltage, frequency and plug configurations may vary. All Rights Reserved. SkyVue® SKYVUE is not responsible for typographical, technical, or descriptive errors.

43 Legal Information D

Software Licenses device with a voltage converter kit sold for appliances. All software is provided subject to a software license agreement(s) and SKYVUE, the SKYVUE logo, and other terms and phrases are you agree that you will be bound by such license agreement(s) in addition trademarks or registered trademarks of SKYVUE Putdoor TV, Inc. Legal Information to these terms. Your use of this product is subject to VIZIO’s privacy policy, D Battery Disposal which may be updated from time to time, and is available to view at VIZIO, the VIZIO logo, the V logo, and other terms and phrases are Caution: This product may be shipped with batteries. Do http://www.vizio.com/privacy. trademarks or registered trademarks of VIZIO, Inc. not dispose of batteries in a fire or with ordinary household waste. Batteries may explode and can cause damage. HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are Export Regulations Replace batteries only with the same or equivalent type trademarks or registered trademarks of HDMI Licensing LLC. Software Licenses Customer acknowledges that the VIZIO products, which include device with a voltage converter kit sold for appliances. of battery recommended by SKYVUE. The disposal of batteries may be All software is provided subject to a software license agreement(s) and SKYVUEtechnology, the andSKYVUE software, logo, areand subjectother terms to customs and phrases and export are control FCCFor DTS Warning patents, see http://patents.dts.com. Manufactured under license regulated by your state. Please always check with your state to determine you agree that you will be bound by such license agreement(s) in addition trademarkslaws in the orUnited registered States trademarks (“US”). The ofproducts SKYVUE may Putdoor also be TV subject, Inc. to the from DTS, Inc. DTS, the Symbol, DTS and the Symbol together, and DTS the how to properly dispose of your batteries. to these terms. Your use of this product is subject to VIZIO’s privacy policy, customs and export control laws and regulations of the country in which Studio SoundBattery II are registered Disposal trademarks and/or trademarks of DTS, Inc. which may be updated from time to time, and is available to view at VIZIO,the products the VIZIO are logo,manufactured the V logo, and/or and received. other terms and phrases are in the UnitedCaution:Caution: States and/orThis This product productother may countries. be may shipped be © withshipped DTS, batteries. Inc. with All Do Rights batteries. not dispose Reserved. ofDo batteries inProduct a fire or Recyclingwith ordinary household trademarks or registered trademarks of VIZIO, Inc. waste. Batteries may explode and can cause damage. Replace batteries only with the same or equivalent type of http://www.vizio.com/privacy. batterynot dispose recommended of batteries by SKYVUE. in a fire The disposalor with ofordinary batteries mayhousehold be regulated byThe your disposalstate. Please and always recycling check of consumer electronic products may be Internet Connectivity Manufacturedwithwaste. yourunder state Batteries license to determine mayfrom the explode Dolbyhow to properlyLaboratories. and can dispose cause ofDolby, your damage. batteries. Dolby regulated by your state. Always properly dispose of your SKYVUE products HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are Export Regulations Network conditions, environmental and other factors may negatively Audio, DolbyReplace Vision, batteriesand the double-Donly with symbol the same are trademarksor equivalent of typeDolby in accordance with local laws and regulations. SKYVUE supports the proper Customer acknowledges that the VIZIO products, which include trademarksaffect connectivity or registered and the trademarks resulting ofvideo HDMI quality, Licensing if any. LLC. ofLaboratories. battery recommended Confidential by SKYVUE unpublished. The disposal work. ofCopyright batteries may© 2013-2015 be recycling of our products. technology and software, are subject to customs and export control For DTS patents, see http://patents.dts.com. Manufactured under license ProductregulatedDolby Laboratories. by Recycling your state. All Pleaserights reserved.always check with your state to determine laws in the United States (“US”). The products may also be subject to the fromThe DTS,applications Inc. DTS, and the Symbol,content DTSof the and applications the Symbol picturedtogether, hereinand DTS or the how to properly dispose of your batteries. customs and export control laws and regulations of the country in which Studiodescribed Sound in II areaccompanying registered trademarks documentation and/or maytrademarks only be of DTS,available Inc. ©The 2017 disposal Google and Inc.recycling All rights of consumer reserved. electronic Google products Cast ismay a trademarkbe regulated ofby your state. Always properly dispose of your the products are manufactured and/or received. inin the certain United countriesStates and/or or otherlanguages, countries. may © DTS,require Inc. Alladditional Rights Reserved. fees or ProductGoogleSKYVUE RecyclingInc. products in accordance with local laws and regulations. SKYVUE supports the properPackaging recycling of Disposal our products. subscription charges, and may be subject to future updates, modifications The disposal and recycling of consumer electronic products may be SKYVUE encourages the recycling of the packaging used for this product. Other names of companies, products, and services used in this User Internet Connectivity Manufacturedor discontinuation under without license notice. from VIZIO Dolby has Laboratories. no control over Dolby, third Dolby party Packagingregulated by your Disposal state. Always properly dispose of your SKYVUE products Please break-down all boxes and recycle eligible materials according to Network conditions, environmental and other factors may negatively Audio,applications Dolby orVision, content and and the assumesdouble-D no symbol responsibility are trademarks for the availability of Dolby inManual accordance may with be trademarks,local laws and trade regulations. names SKYVUEor service supports marks theof othersproper local laws and regulations. affect connectivity and the resulting video quality, if any. Laboratories.or interruption Confidential of such applications unpublished or content. work. Additional Copyright third © party2013-2015 recyclingand VIZIO, of our Inc. products. disclaims any interest in trademarks, trade names or Dolby Laboratories. All rights reserved. serviceSKYVUE marks encourages other the than recycling its own. of the Mention packaging of used non-VIZIO for this product. products Please is forbreak-down all boxes and recycle eligible terms, conditions and restrictions apply. A Google account is required to materials according to local laws and regulations. The applications and content of the applications pictured herein or download applications from the Google Play store. A MyVIZIO account is informational purposes only. Warning: To reduce risk of electric shock, fire or damage to your device or other property, do not attempt to power the described in accompanying documentation may only be available ©required 2017 Google to access Inc. Allcertain rights features reserved. of Googlethe VIZIO Cast SmartCast™ is a trademark App. of Caution: Avoid exposing a drive to magnetic fields. Security in certain countries or languages, may require additional fees or Google Inc. Packaging Disposal Warning:devices Towith reduce magnetic risk of electric fields shock, may include fire or damage airport to yourwalk-through device or other property, do not attempt to power subscription charges, and may be subject to future updates, modifications Information in this User Manual is subject to change without notice. SKYVUE encouragesdevices andthe recyclingsecurity wands. of the Airportpackaging conveyor used for belts this or product. similar Other names of companies, products, and services used in this User the device with a voltage converter kit sold for appliances. or discontinuation without notice. VIZIO has no control over third party Please break-downsecurity all devices boxes andthat recyclecheck eligiblecarry-on materials luggage accordinggenerally touse Manual may be trademarks, trade names or service marks of others applications or content and assumes no responsibility for the availability local laws andX-rays regulations. and should not cause magnetic damage to drives. and VIZIO, Inc. disclaims any interest in trademarks, trade names or or interruption of such applications or content. Additional third party All reasonable efforts have been made to ensure the accuracy of the If you are traveling internationally, check the customs regulations for service marks other than its own. Mention of non-VIZIO products is for terms, conditions and restrictions apply. A Google account is required to information provided herein. All product specifications, functionality device use for each country you will visit, and check the power cord and informational purposes only. Warning: To reduce risk of electric shock, fire or damage to download applications from the Google Play store. A MyVIZIO account is features, configurations, performance, design and other product information adapter requirements for each location in which you plan to use the your device or other property, do not attempt to power the required to access certain features of the VIZIO SmartCast™ App. described Caution:herein are Avoid subject exposing to change a drive without to magnetic notice. fields. Security display as voltage, frequency and plug configurations may vary. SKYVUE isdevices not responsible with magnetic for typographical, fields may include technical, airport or descriptivewalk-through Information in this User Manual is subject to change without notice. errors. devices and security wands. Airport conveyor belts or similar security devices that check carry-on luggage generally use X-rays and should not cause magnetic damage to drives. All reasonable efforts have been made to ensure the accuracy of the If you are traveling internationally, check the customs regulations for 43 information provided herein. All product specifications, functionality device use for each country you will visit, and check the power cord and features, configurations, performance, design and other product information adapter requirements for each location in which you plan to use the described herein are subject to change without notice. display as voltage, frequency and plug configurations may vary. SKYVUE is not responsible for typographical, technical, or descriptive errors.

We at SKYVUE outdoor TV’s want to thank you for purchasing your new Fusion series SkyVue outdoor TV. 43 SKYVUE will warranty any defect or failure from the manufacturing process according to the terms listed in the warranty section of our site: www.skyvue.com

SKYVUE does not maintain or support any 3rd party software or apps that are preloaded or downloaded to the TV. For any support of an app that is not functioning correctly, please contact the original publisher.

Owner’s Manual - Model FSN Troubleshooting and Legal Information | 57