DOCSLIB.ORG

Hyperworks Release Notes

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Hyperworks Release Notes HyperWorks is a division of Altair altairhyperworks.com Altair Engineering Support Contact Information Web site www.altairhyperworks.com Location Telephone e-mail Australia 64.9.413.7981 [email protected] Brazil 55.11.3884.0414 [email protected] Canada 416.447.6463 [email protected] China 86.400.619.6186 [email protected] France 33.1.4133.0992 [email protected] Germany 49.7031.6208.22 [email protected] India 91.80. 6629.4500 [email protected] 1.800.425.0234 (toll free) Italy 39.800.905.595 [email protected] Japan 81.3.5396.2881 [email protected] Korea 82.70.4050.9200 [email protected] Mexico 55.56.58.68.08 [email protected] New Zealand 64.9.413.7981 [email protected] North America 248.614.2425 [email protected] Scandinavia 46.46.460.2828 [email protected] South Africa 27 21 8311500 [email protected] United Kingdom 01926.468.600 [email protected] In addition, the following countries have resellers for Altair Engineering: Colombia, Czech Republic, Ecuador, Israel, Russia, Netherlands, Turkey, Poland, Singapore, Vietnam, Indonesia Official offices with resellers: Canada, China, France, Germany, India, Malaysia, Italy, Japan, Korea, Spain, Taiwan, United Kingdom, USA Copyright© Altair Engineering Inc. All Rights Reserved for: HyperMesh® 1990-2014; HyperCrash® 2001-2014; OptiStruct® 1996-2014; RADIOSS®1986-2014; HyperView®1999-2014; HyperView Player® 2001-2014; HyperStudy® 1999-2014; HyperGraph®1995-2014; MotionView® 1993-2014; MotionSolve® 2002- 2014; HyperForm® 1998-2014; HyperXtrude® 1999-2014; Process Manager™ 2003-2014; Templex™ 1990-2014; TextView™ 1996-2014; MediaView™ 1999-2014; TableView™ 2013-2014; BatchMesher™ 2003-2014; HyperMath® 2007-2014; Manufacturing Solutions™ 2005-2014; HyperWeld® 2009-2014; HyperMold® 2009-2014; solidThinking® 1993-2014; solidThinking Inspire® 2009-2014; solidThinking Evolve®™ 1993-2014; Durability Director™ 2009-2014; Suspension Director™ 2009-2014; AcuSolve® 1997-2014; AcuConsole® 2006-2014; SimLab®™2004-2014 and Virtual Wind Tunnel™ 2012-2014. In addition to HyperWorks® trademarks noted above, Display Manager™, Simulation Manager™, Compute Manager™, PBS™, PBSWorks™, PBS GridWorks®, PBS Professional®, PBS Analytics™, PBS Desktop™, PBS Portal™, PBS Application Services™, e-BioChem™, e-Compute™ and e-Render™ are trademarks of ALTAIR ENGINEERING INC. Altair trademarks are protected under U.S. and international laws and treaties. Copyright© 1994-2014. Additionally, Altair software is protected under patent #6,859,792 and other patents pending. All other marks are the property of their respective owners. ALTAIR ENGINEERING INC. Proprietary and Confidential. Contains Trade Secret Information. Not for use or disclosure outside of ALTAIR and its licensed clients. Information contained inHyperWorks® shall not be decompiled, disassembled, or “unlocked”, reverse translated, reverse engineered, or publicly displayed or publicly performed in any manner. Usage of the software is only as explicitly permitted in the end user software license agreement. Copyright notice does not imply publication HyperMesh 13.0.110 Release Notes General List Selection Length Compare Tool Other Enhancements Resolved Issues Connectors ACM (general) Supports Radius for RBE3 Elements Hexa (adhesive) Seam Discontinuity Connector Conversion from Spot to Bolt and Vice Versus Hexa (adhesive – shell gap) Realization for Pam-Crash Area Connector Midposition Option for Solid Absorption Trimming of Seam and Area Connectors Vector Seam for nCode Bolt (collapsed rigid) for Nastran and OptiStruct Option for Projecting Hexa Faces to Shells Bolt Realizations for Abaqus Improved Quality of Hexa (adhesive) Seam Realizations Improved Absorption of Hexa (adhesive) Seam-like Realizations Penta Seam Realization Absorption Resolved Issues Geometry Editing Robustness Updated CAD Import Version Support Intergraph JT Export Graphics Scale Resolved Issues HyperBeam New Options Resolved Issues HyperMorph Enhancements Resolved Issues Meshing BatchMesher Improved and Streamlined Re-mesh Using Geometry QI Optimized Smoothing Modify Hole and Washer Tool Mesh Boolean Mesh Imprint Anchor Nodes Resolved Issues APIs *createlist List Length hm_hmgetfileversion hm_getattachedsolidelemfaces Resolved Issues 13.0.110 Release Notes - General List Selection Length Entity list selections are now unlimited in length. Compare Tool • Added the ability to compare 2D FE with assigned thickness and offset to 3D CAD. • Significant improvements to performance and accuracy. Other Enhancements • Added functionality to delete multiple entity collectors in the browser • Replace selection under the Mesh menu bar is now relocated in Mesh > Edit menu • Count can now show 9 digits count for nodes and elements • Ability to clear unresolved ID field in the Entity Editor • Retain and Equivalence at selection in the Edges panel is now added to the Faces panel • Browser toolbar separator is added between global display and virtual collector display toolbar Resolved Issues • Resolved organization issue where systems without System Collector HM Comments across different includes were sometimes organized into existing System Collectors from different include files. • Vectors exported do not remain in the same collector of an include file on import • Loads and Systems are now organized along with Parent collector like elements and nodes. The support will be available from include view browser as well as from the Organize panel. • Missing contact surfaces on import while using FE Overwrite • Application crash related to loadstep selection with model that contains large number of loadsteps • Resolved an issue related to load interpolation • RBE3 handling while using Box Trim • Application crashes while using Display none and Display all icons in the Model browser after loading a nested include file using import as include option • Resolved a crash when performing a quality index node optimize operation on a free node • Material orientation is now correctly duplicated for split and reflected elements • Entity State browser can now sort by Entity name • View selection is added to the Create context menu for the Model browser for ANSYS interface • CORD1R systems orientation for 2nd and 3rd grid is fixed for HyperMesh database files • Application crash when clicking reject after organizing elements 13.0.110 Release Notes - Connectors ACM (general) Supports Radius for RBE3 Elements The spot ACM (general) realization type creates a connection consistent out of RBE3 elements on both sides of one or more hexa elements. Especially for cases with different mesh sizes it becomes important to decides, which nodes are considered for the connection dependent on a radius definition instead of connecting one element per RBE3 only. A definable feature angle is considered as well. Hexa (adhesive) Seam Discontinuity The seam Hexa (adhesive) realization type can be performed in a discontinuous manner. The pattern can be defined as usual, but additionally the hexa distribution along the seamline can be defined in sense of weld length and break length. The final exact weld length depends on the overall seamline length. A check is performed, if the final weld length deviates too much from the requested length. Connector Conversion from Spot to Bolt and Vice Versus Single point connectors can be converted from spot to bolt and from bolt to spot now. This provides easy access to all for spots and bolts available realization types. Hexa (adhesive – shell gap) Realization for Pam-Crash This realization creates a continuous or discontinuous hexa row of a certain width and pattern between two parallel parts. The upper and lower outer nodes of the hexas are projected to the part’s faces. The connection is realized due to a tied contact. Area Connector Midposition Option for Solid Absorption The absorbed area connectors can optional be placed into the middle of the absorbed solid elements. This is activated by default. This prevents for situations shown above, that the connector is placed on the bottom side and for the next on the top side. Performing a realization on the midpositioned area connectors usually deliver the better results. Trimming of Seam and Area Connectors On the seam and area edit subpanel a trimming functionality has been added. Different options are available to perform the cut in the required manner based on a node selection. It’s possible now to create a node on a connector due to a long left mouse click. The shorter/smaller piece can be deleted automatically. After the trimming on both connector pieces the exact same information remains. Trimming causes an unrealization of the connector. Vector Seam for nCode There is a special seam realization type in the Abaqus user profile – seam (vector). This realization type is intended to be used along a fillet weld, which is modeled with solid elements already. Other than usually this realization creates only two vectors at each connector testpoint. These vectors represent the toe and normal vector of the fillet weld. Along the default XML connector export a .asc file is exported, which contains the vector information in a format nCode understands. Bolt (collapsed rigid) for Nastran and OptiStruct The Bolt (collapsed rigid) realization has just one single rigid element connecting all bolt hole layers. The centre of the rigid element will be calculated based on all connected nodes. Option for Projecting Hexa Faces to Shells For the realization of ACM (shell gap) spotwelds usually almost
Load more

Recommended publications
  • Cimdata Cpdm Late-Breaking News
    PLM Industry Summary Sara Vos, Editor Vol. 21 No. 8 - Friday, February 22, 2019 Contents CIMdata News _____________________________________________________________________ 2 Intelligence for Product Lifecycle Management (CIMdata Blog) __________________________________2 Read last week’s Top Ten Stories ___________________________________________________________2 SOLIDWORKS World 2019: Expanding the 3DEXPERIENCE Platform (CIMdata Commentary) _______3 Acquisitions _______________________________________________________________________ 6 Zix Closes Acquisition of AppRiver, Creating Leading Cloud-based Cybersecurity Solutions Provider ____6 Company News _____________________________________________________________________ 6 AMC Bridge Named to IAOP’s 2019 Best of The Global Outsourcing 100 __________________________6 Capgemini Presents Airbus with the Global Leadership Award for Innovation _______________________7 Business-Critical Cloud Adoption Growing yet Security Gaps Persist, Report Says____________________8 Creaform Engineering Expands its GD&T Service Offer with New Dimensional Management Services ___9 Digital Catapult collaborates with Siemens, BT and PTC on next generation network infrastructure ______10 Elysium Presents Gold Partner Award to Honlitech ____________________________________________12 Elysium Presents Platinum Partner Award to CAMTEX ________________________________________12 Maplesoft and Sigmetrix Announce Direct Operations in China __________________________________12 Signalysis and Vaughn Associates Partnership
    [Show full text]
  • Conference Program
    Ernest N. Morial ConventionConference Center Program • New Orleans, Louisiana HPC Everywhere, Everyday Conference Program The International Conference for High Performance Exhibition Dates: Computing, Networking, Storage and Analysis November 17-20, 2014 Sponsors: Conference Dates: November 16-21, 2014 Table of Contents 3 Welcome from the Chair 67 HPC Impact Showcase/ Emerging Technologies 4 SC14 Mobile App 82 HPC Interconnections 5 General Information 92 Keynote/Invited Talks 9 SCinet Contributors 106 Papers 11 Registration Pass Access 128 Posters 13 Maps 152 Tutorials 16 Daily Schedule 164 Visualization and Data Analytics 26 Award Talks/Award Presentations 168 Workshops 31 Birds of a Feather 178 SC15 Call for Participation 50 Doctoral Showcase 56 Exhibitor Forum Welcome 3 Welcome to SC14 HPC helps solve some of the SC is fundamentally a technical conference, and anyone world’s most complex problems. who has spent time on the show floor knows the SC Exhibits Innovations from our community have program provides a unique opportunity to interact with far-reaching impact in every area of the future of HPC. Far from being just a simple industry science —from the discovery of new exhibition, our research and industry booths showcase recent 67 HPC Impact Showcase/ drugs to precisely predicting the developments in our field, with a rich combination of research Emerging Technologies next superstorm—even investment labs, universities, and other organizations and vendors of all 82 HPC Interconnections banking! For more than two decades, the SC Conference has types of software, hardware, and services for HPC. been the place to build and share the innovations that are 92 Keynote/Invited Talks making these life-changing discoveries possible.
    [Show full text]
  • NEI Crafts Program to Boost Tech
    20120305-NEWS--0001-NAT-CCI-CD_-- 3/2/2012 6:47 PM Page 1 ® www.crainsdetroit.com Vol. 28, No. 10 MARCH 5 – 11, 2012 $2 a copy; $59 a year ©Entire contents copyright 2012 by Crain Communications Inc. All rights reserved Page 3 When film credits dried up, What’s behind Beaumont NEI crafts recruiting new chiefs? Cut! so did Raleigh’s payments Sale of Barden building brings estate closure closer NATHAN SKID/CRAIN’S DETROIT BUSINESS program to Focus: Innovations boost tech Grants to top $30M; Midtown a target BY CHAD HALCOM tax credits, Raleigh Michigan could CRAIN’S DETROIT BUSINESS continue to operate for five more years BY TOM HENDERSON CRAIN’S DETROIT BUSINESS aleigh Michigan Studios opened without returning another dime. Michigan Motion Picture Studios LLC The New Economy Initiative has embarked on an under a marquee of co-owners , which owns and operates Raleigh Stu- ambitious 10-year program called the Regional Inno- R with names almost as vation Network to boost high-tech development and Breast cancer ultrasound renowned in Michigan as the Holly- dios Detroit in Pontiac, is co-owned job creation in Southeast Michigan, with a particu- lar emphasis on Detroit’s Mid- wood stars and directors they hoped by its CEO, Linden Nelson; John tech nears marketplace, Rakolta, CEO of Detroit-based Wal- town. to attract. NEI Executive Director David bridge Aldinger Co. Page 11 But the studio in Pontiac likely will , which built the stu- Egner said the initiative — de- miss a second consecutive bond pay- dio; A. Alfred Taubman, founder of signed to connect the dots of in- Bloomfield Hills-based Taubman Cen- novation, from the riverfront to Crain’s lists: IP law firms, ment to investors in August unless it Ann Arbor and East Lansing — ters Inc.; and William Morris Endeavor En- biotech firms, Pages 17-18 lands another big-budget film pro- will make at least $30 million in tertainment, duction lease soon or the state eases headed by co-CEO Ari grants to an array of organiza- Emanuel, brother to Chicago Mayor tions.
    [Show full text]
  • Altair Simsolid Installation Guide P.2
    Altair SimSolid 2019 Installation Guide Learn more at altairhyperworks.com Intellectual Property Rights Notice: Copyrights, Trademarks, Trade Secrets, Patents & Third Party Software Licenses Altair SimSolid™ Altair Engineering Canada LTD Copyright© 2014-2018. All Rights Reserved. Altair Engineering Copyright© 2018. All Rights Reserved. Special Notice: Pre-release versions of Altair software are provided ‘as is’, without warranty of any kind. Usage of pre-release versions is strictly limited to non-production purposes. solidThinking Platform: Altair INSPIRE™ 2019 ©2009-2018 including Altair INSPIRE Motion and Altair INSPIRE Structures Altair INSPIRE Extrude-Metal 2019 ©1996-2018 (formerly Click2Extrude®-Metal) Altair INSPIRE Extrude-Polymer 2019 ©1996-2018 (formerly Click2Extrude®-Polymer) Altair INSPIRE Cast 2019 ©2011-2018 (formerly Click2Cast®) Altair INSPIRE Form 2019 ©1998-2018 (formerly Click2Form®) Altair COMPOSE™ 2019 ©2007-2018 (formerly solidThinking Compose®) Altair ACTIVATE™ 2019 ©1989-2018 (formerly solidThinking Activate®) Altair EMBED™ 2019 ©1989-2018 (formerly solidThinking Embed®) o Altair EMBED SE 2019 ©1989-2018 (formerly solidThinking Embed® SE) o Altair EMBED/Digital Power Designer 2019 ©2012-2018 HyperWorks® Platform: HyperMesh® ©1990-2018; HyperCrash® ©2001-2018; OptiStruct® ©1996-2018; RADIOSS® ©1986- 2018; HyperView® ©1999-2018; HyperView Player® ©2001-2018; HyperMath® ©2007-2017; HyperStudy® ©1999-2018; HyperGraph® ©1995-2018; MotionView® ©1993-2018; MotionSolve® ©2002-2018; HyperForm® ©1998-2018; HyperXtrude® ©1999- 2018; Process Manager™ ©2003-2018; Templex™ ©1990-2018; TextView™ ©1996-2018; MediaView™ ©1999-2018; TableView™ ©2013-2018; BatchMesher™ ©2003-2018; HyperWeld® ©2009-2018; HyperMold® ©2009-2018; Manufacturing Solutions™ ©2005-2018; Durability Director™ ©2009-2018; Suspension Director™ ©2009-2018; AcuSolve® ©1997-2018; AcuConsole® ©2006-2018; SimLab® ©2004-2018; Virtual Wind Tunnel™ ©2012-2018; FEKO® (©1999-2014 Altair Development S.A.
    [Show full text]
  • Altair Simlab St CAD to Muliphysics Analysis in Minutes
    Altair SimLab sT CAD to Muliphysics Analysis in Minutes hero image Altair SimLab sT is a process-oriented multidisciplinary simulation environment that accurately analyze sthe performance of complex assemblies. Multiple physics including structural, thermal and fluid dynamics can be easily setup using highly automated modeling tasks, helping to drastically reduce the time spent creating finite element models and interpreting results. Altair’s robust, accurate, and scalable solvers can run either locally, on remote servers, or in the cloud. Benefits Intuitive User Environment • Solve statics, dynamics, heat transfer, and An intuitive and self-explanatory graphical Product Highlights fluid flow problems in minutes directly user interface covers all aspects of the within SimLab sT’s new intuitive user • AccurateList them multiphysics out solutions simulation process. Instead of tedious environment • forLook linear at these and beautifulnonlinear bullets structural, that geometry clean-up, work is performed thermal,extend even and tocomputational the second linejm fluid directly on the geometry by defining mesh Results in One-button Click dynamicsfj analyses specifications for individual regions. • Check the convergence and robustness of • HighlyList them efficient out feature recognition results with one-button click • algorithms,Look at these process-oriented beautiful bullets that Robust, Repeatable Simulation Workflows • Create and share robust, repeatable automationextend even templates to the second line simulation workflows with automatic
    [Show full text]
  • Altair Simlab 2019.1 Features May 24,© 2019 Altair Engineering, Inc
    Altair SimLab 2019.1 Features May 24,© 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved. CAD IMPORT / EXPORT May 24,© 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved. SolidWorks File > Import > CAD Sample model • Support added to import SolidWorks CAD models. • Design parameters from SolidWorks part and assembly can be imported and DOE study can be performed. May 24,© 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved. Other enhancements Ç AD • Support added to drag and drop the Catia models. • Support added to export wire and general bodies as Parasolid geometry. CAD Through Translation • Support added to import Creo 4.0 and CATIA R28 models. May 24,© 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved. USER INTERFACE May 24,© 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved. Assembly Browser Model Right click > Save Geometry • Option added to save the CAD geometry. This will be mainly useful, if we regenerate the design parameters then we can save the updated CAD geometry. May 24,© 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved. Function Usage Log File > Help • Icons for each tool is added for easy identification of the tool. • Dialog resize supported. • Reset button is added to clear usage log. May 24,© 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved. May 24,© 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved. Mouse Settings File > Preferences > System • Abaqus CAE, ANSYS Workbench and SolidWorks Mouse settings can be set in SimLab. May 24,© 2019 Altair Engineering, Inc. Proprietary and Confidential.
    [Show full text]
  • Manage Engineering Data Complex Models and Simulations Yield a Torrent
    NX 8 for Design. Smarter decisions, better products. Learn more on page 11 DtopEng_banner_NXCAD_MAR2012.indd 1 3/8/12 11:02 AM April 2012 / deskeng.com Origin 8.6 Overview P.22 Direct Modeling and FEA P.24 TECHNOLOGY FOR DESIGN ENGINEERING Manage Engineering Data Complex models and simulations yield a torrent of data to seize and control. P.16 RACING AHEAD WITH CLUSTERS P.35 REVIEW: HP Z10 WORKSTATION P.38 P.40 PREPARING 3D MODELS de0412_Cover_Darlene.indd 1 3/15/12 12:20 PM Objet.indd 1 3/14/12 11:17 AM DTE_0412_Layout 1 2/28/12 4:36 PM Page 1 Data Loggers & Data Acquisition Systems iNET-400 Series Expandable Modular Data Acquisition System • Directly Connects to Thermocouple, RTD, Thermistor, Strain Gage, Load Complete Cell, Voltage, Current, Resistance Starter and Accelerometer Inputs System $ • USB 2.0 High Speed Data Acquisition 990 Hardware for Windows® ≥XP SP2, Vista or 7 (XP/VS/7) • Analog and Digital Input and Outputs • Free instruNet World Software Visit omega.com/inet-400_series © Kutt Niinepuu / Dreamstime.com Stand-Alone, High-Speed, 8-Channel High Speed Voltage Multifunction Data Loggers Input USB Data Acquisition Modules OM-USB-1208HS Series Starts at $499 High Performance Multi-Function I/O USB Data Acquisition Modules OMB-DAQ-2416 Series OM-LGR-5320 Series Starts at Starts at $1100 $1499 Visit omega.com/om-lgr-5320_series Visit omega.com/om-usb-1208hs_series Visit omega.com/omb-daq-2416 ® omega.com ® © COPYRIGHT 2012 OMEGA ENGINEERING, INC. ALL RIGHTS RESERVED Omega.indd 1 3/14/12 10:54 AM Degrees of Freedom by Jamie J.
    [Show full text]
  • Stimulating Simulation
    Computing solutions for SCIENTIFIC scientists and engineers COMPUTING December 2018/January 2019 WORLD Issue #163 High performance computing Laboratory informatics Modelling and simulation A cloudy future Artificial healthcare Engineering hits the catwalk STIMULATING SIMULATIONA brave new world for medical devices www.scientific-computing.com Pharma&Biotech The MODA™ Platform The Missing Piece in Your Lab Systems Portfolio MODA-EM™ Software for QC Micro – Implement, Validate, Integrate Seamlessly. Lonza’s MODA-EM™ Software is purpose-built for QC Microbiology’s unique – Reduce investigation and reporting time with rapid analysis challenges. MODA™ Software delivers better business alignment with QC, and visualization of Micro data at a lower total cost of ownership versus customizing your existing LIMS – Manage, schedule and track large EM and utility sample volumes or other lab systems. – Reduce errors while improving compliance and data integrity – Deliver measurable return on investment from time, cost and Find the missing piece in your lab systems portfolio. compliance savings Visit www.lonza.com/moda or contact us at [email protected] © 2015 Lonza www.lonza.com/moda MODA IT Ad 0715 for Scientific Computing World MODA_IT_Ad_Comps_final_selection.indd 1 7/27/15 5:27 PM LEADER l December 2018/January 2019 Issue 163 Robert Contents Roe Editor High performance computing Ray of light 4 The cost of cloud computing is coming down and potential uses are on the rise, writes Robert Roe Artificial gets real Predicting protein structure 7 In final issue of 2018, AI continues DeepMind has announced a new tool in AI research, to be a strong theme across all three Robert Roe reports core sections of the magazine as the Oiling the wheels in Dallas 8 technology weaves its way into every facet of scientific research.
    [Show full text]
  • AVL EXCITE™ Acoustics by AVL Airborne Noise Calculation
    AVL EXCITE™ Acoustics by AVL Airborne Noise Calculation EXCITE™ Acoustics is a tool for the calculation of sound radiation in free field from vibrating structures such as engines and power units using the Wave Based Technique (WBT). It seamlessly fits into the EXCITE™ structural dynamic analysis workflow as the final step of acoustic analysis, using the FE mesh of the structure and the surface velocity results as input. With interfaces to common FE tools for the import of the vibrating structure geometry and the surface velocity boundary condition, EXCITE™ Acoustics can also be used as a standalone EXCITE™ tool. Benefits Fast and flexible post-processing Product Highlights microphone positions and field point meshes Meshing of the acoustic model starts from can be added or modified without unmodified FE mesh used for the structural recalculation of the sound radiation • Starts from unmodified structural vibration analysis finite element mesh no need to close smaller openings, to Features change element types • Automated generation of acoustic Meshing tool mesh with model preparation Fully automated generation of the acoustic for automated generation of the acoustic complete in just a few clicks mesh with interactive 3D viewer WBT mesh easy and fast preparation of the calculation • Applies on model for the entire model with a few clicks Various interfaces to import geometry and frequency range surface velocity boundary conditions of the Acoustic mesh is not frequency dependent vibrating structure • Subsequently definable post- accurate
    [Show full text]
  • How Can You Make Smarter Product Decisions?
    TECHNOLOGY TECHNOLOGY FOR FOR DESIGN DESIGN ENGINEERING ENGINEERING How can you make smarter product decisions? Smarter decisions, better products. www.siemens.com/tecnomatix DTEde0612_Cover_Tip-On.indd cover wrap F1.indd 1 1 5/16/124/30/12 11:44 8:30 AM Get smarter with Teamcenter 9. Learn more on page 11 DtopEng_banner_TC9.indd 1 June 2012 / deskeng.com 5/3/12 9:35:14 AM Reviews: AutoCAD 2013 P. 34 Maple 16 P. 38 HP Z-series Workstations P. 41 DAQ via Tablet P. 44 TECHNOLOGY FOR DESIGN ENGINEERING CAD ROI P. 50 HIGH TECH LOWDesign engineering COST technologies on a budget. LOW-COST CAD OPTIONS P. 17 PERSONAL 3D PRINTERS P. 22 SAVE ON SUPERCOMPUTING P. 27 PLM PRICED FOR SMBS P. 31 de0612_Cover_Darlene.indd 1 5/16/12 11:20 AM Every product is a promise For all its sophisticated attributes, today’s modern product is, at its core, a promise. A promise that it will perform properly, not fail unexpectedly, and maybe even exceed the expectations of its designers and users. ANSYS helps power these promises with the most robust, accurate and fl exible simulation platform available. To help you see every possibility and keep every promise. Realize Your Product PromiseTM To learn more about how leading companies are leveraging simulation as a competitive advantage, visit: www.ansys.com/promise ANSYS.indd 1 5/14/12 4:12 PM ansys_ad_7.875x10.75_032912.indd 1 3/29/12 9:46 PM DTE_0612_Layout 1 5/1/12 9:01 AM Page 1 Data Acquisition Modules & Data Loggers 8/16-Channel Thermocouple/Voltage Input USB Data Acquisition Module • 8 Differential or 16 Single-Ended
    [Show full text]
  • Advanced Engineering Environments for Small Manufacturing Enterprises: Volume I
    Advanced Engineering Environments for Small Manufacturing Enterprises: Volume I Steven J. Fenves National Institute of Standards and Technology; Manufacturing Engineering Laboratory Ram D. Sriram National Institute of Standards and Technology; Manufacturing Engineering Laboratory Young Choi Chung-Ang University; Mechanical Engineering; Formerly, National Institute of Standards and Technology; Manufacturing Engineering Laboratory Joseph P. Elm Software Engineering Institute; Carnegie Mellon University John E. Robert Software Engineering Institute; Carnegie Mellon University December 2003 TECHNICAL REPORT CMU/SEI-2003-TR-013 ESC-TR-2003-013 Published in collaboration with The National Institute of Standards and Technology NISTIR 7055 Pittsburgh, PA 15213-3890 Advanced Engineering Environments for Small Manufacturing Enterprises: Volume I CMU/SEI-2003-TR-013 ESC-TR-2003-013 Published in collaboration with The National Institute of Standards and Technology NISTIR 7055 Steven Fenves (NIST) Ram Sriram (NIST) Young Choi (Chung-Ang University/NIST) Joseph P. Elm (SEI) John E. Robert (SEI) December 2003 Technology Insertion, Demonstration, and Evaluation (TIDE) Program Unlimited distribution subject to the copyright. This work is sponsored by the U.S. Department of Defense. The Software Engineering Institute is a federally funded research and development center sponsored by the U.S. Department of Defense. Copyright 2003 by Carnegie Mellon University. NO WARRANTY THIS CARNEGIE MELLON UNIVERSITY AND SOFTWARE ENGINEERING INSTITUTE MATERIAL IS FURNISHED ON AN "AS-IS" BASIS. CARNEGIE MELLON UNIVERSITY MAKES NO WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, AS TO ANY MATTER INCLUDING, BUT NOT LIMITED TO, WARRANTY OF FITNESS FOR PURPOSE OR MERCHANTABILITY, EXCLUSIVITY, OR RESULTS OBTAINED FROM USE OF THE MATERIAL. CARNEGIE MELLON UNIVERSITY DOES NOT MAKE ANY WARRANTY OF ANY KIND WITH RESPECT TO FREEDOM FROM PATENT, TRADEMARK, OR COPYRIGHT INFRINGEMENT.
    [Show full text]
  • CAA ONE Slide Catalog | | Confidential Information | 11/9/2018 Information | Confidential Systèmes © Dassault Dassault © 3DS.COM
    1 3DS.COM © Dassault Systèmes | Confidential Information | 11/9/2018 | CAA ONE Catalog Slide ONE CAA Update: October 2018 AIKOKU ALPHA “High quality NC data to shop floor” CATIA MD1 • Aikoku POST for 4 Axes | April 2016 TG1 Generates numerical control ISO code for 2 through 4 axis machines tools 11/9/2018 NCG • Various 4 axis machine tools support (e.g., Rotary Table & Tilting Head, etc.) NVG MPG Last Update: MPA • Linearization and optimum feed rate of 4 axis Coreq Prereq • Automatic rotary table clamp | Confidential Information | Information | Confidential • Production times calculation • Various condition verification (e.g., travel, feed rate and spindle limit) Systèmes CATIA MD1 • Aikoku POST for 5 Axes © Dassault Dassault © TG1 Same functionalities as ‘Aikoku POST for 4 axis’ except as ‘5 axis functionality Contact: 3DS.COM NCG NVG Yasuyuki Watanabe MPG +81-52-232-2666 Coreq Prereq MPA [email protected] IClick here for Industry Legend) Partner Website: www.aikoku.co.jp 2 ALTAIR ENGINEERING “Optimize your Concept Design” CATIA MD2 • HyperShape/CATIA | GPS April 2016 Innovatively develop lightweight, high-performance design proposals for specific Prereq Prereq EST 11/9/2018 methods-of-manufacture FMD FMS • Proposes better solutions based on topology, topography and gauge optimization Last Update: GAS Coreq GDY CATIA MD2 • HyperCrash/CATIA Coreq GPS | Confidential Information | Information | Confidential A tailored and automated crash modeling environment for increased productivity FMS Prereq GAS and results quality Systèmes AB3
    [Show full text]