DOCSLIB.ORG

Spare Parts Planning and Control for Maintenance Operations

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Spare Parts Planning and Control for Maintenance Operations Spare parts planning and control for maintenance operations Citation for published version (APA): Arts, J. J. (2013). Spare parts planning and control for maintenance operations. Technische Universiteit Eindhoven. https://doi.org/10.6100/IR760116 DOI: 10.6100/IR760116 Document status and date: Published: 01/01/2013 Document Version: Publisher’s PDF, also known as Version of Record (includes final page, issue and volume numbers) Please check the document version of this publication: • A submitted manuscript is the version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version and the galley proof are versions of the publication after peer review. • The final published version features the final layout of the paper including the volume, issue and page numbers. Link to publication General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights. • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal. If the publication is distributed under the terms of Article 25fa of the Dutch Copyright Act, indicated by the “Taverne” license above, please follow below link for the End User Agreement: www.tue.nl/taverne Take down policy If you believe that this document breaches copyright please contact us at: [email protected] providing details and we will investigate your claim. Download date: 29. Sep. 2021 Spare Parts Planning and Control for Maintenance Operations This thesis is number D175 of the thesis series of the Beta Research School for Operations Management and Logistics. The Beta Research School is a joint effort of the School of Industrial Engineering and the department of Mathematics and Computer Science at Eindhoven University of Technology, and the Center for Production, Logistics and Operations Management at the University of Twente. A catalogue record is available from the Eindhoven University of Technology Library. ISBN: 978-90-386-3475-3 Printed by Proefschriftmaken.nl Uitgeverij BOXPress jj Cover Design by Roy Lurken - BureauNobel This research has been funded by NedTrain. Spare Parts Planning and Control for Maintenance Operations PROEFSCHRIFT ter verkrijging van de graad van doctor aan de Technische Universiteit Eindhoven, op gezag van de rector magnificus, prof.dr.ir. C.J. van Duijn, voor een commissie aangewezen door het College voor Promoties in het openbaar te verdedigen op maandag 11 november 2013 om 16.00 uur door Joachim Jacob Arts geboren te Eindhoven Dit proefschrift is goedgekeurd door de promotoren en de samenstelling van de promotiecommissie is als volgt: voorzitter: prof.dr. A.G.L. Romme 1e promotor: prof.dr.ir. G.J.J.A.N. van Houtum 2e promotor: prof.dr. A.G. de Kok leden: prof.dr.ir. O.J. Boxma prof.dr.ir. L.A.M. van Dongen (Universiteit Twente) prof.dr. R. Levi (Massachusetts Institute of Technology) prof.dr. S. Minner (Technische Universit¨atM¨unchen) prof.dr. C. Witteveen (Technische Universiteit Delft) Acknowledgments Although this thesis has only one author, it is in fact the result of contributions by many people. First I would like to thank my first promotor Geert-Jan van Houtum for his supervision and support. He taught me the tricks of the research trade as well as how to navigate the academic world. He made sure all the research fitted in a larger perspective while also helping out with details and technicalities. I would like to thank NedTrain for funding my PhD research. Working in the maintenance development department of NedTrain under the supervision of Bob Huisman was a great pleasure. Bob Huisman created the perfect environment where practice and research could meet. Apart from being involved with the particulars of research, he also has a keen eye for the human aspect of the research endeavor. I also thank Michel Wilson and Jorge Parada for our joint discussions on research and applications at NedTrain. I thank Leo van Dongen for leading this collaboration between NedTrain and academia, and for chairing the steering committee of this collaboration. I also thank him for his input during meetings of the steering committee and for being on my thesis committee. At NedTrain, I am also indebted to Joost Florie and Guido Aerts for their input on modeling issues and for acquainting me with the particulars of NedTrain's supply chain and repair shop operations. I thank Maarten Driessen for our collaboration on Chapter 2 of this thesis. I enjoyed our many conversations on how to apply scientific knowledge in practice. I also thank Kristina Sharypova for tolerating such lengthy conversations in our office, bringing a pleasant atmosphere to the office, and reminding us of the more important things in life. I would like to thank Simme Douwe Flapper for our collaboration on Chapter 3. Chapter 3 has also benefited from the graduation projects of Karin Vernooij, Anne Basten, and Martine Rousseau. I thank Rob Basten for being my daily supervisor when he was in Eindhoven and his contributions to Chapter 4 of this thesis. Rob Basten, together with Frank Karsten and Willem van Jaarsveld, have provided the necessary feedback and reflection on academic life. Chapter 5 of this thesis has benefited from the master thesis projects of Martijn van Aspert and Nadine Loeffen. I would like to thank Retsef Levi for hosting my visit to MIT and our joint work on Chapter 6 of this thesis. In his busy schedule, he managed to free time for our collaboration and he was always very sharp during our meetings. Working at the Operations Research Center at MIT was truly stimulating. I would also like to thank my sister Saskia and her husband John for letting me and my family stay at their home and otherwise making our stay in the greater Boston area a pleasant experience. My visit to MIT was partially funded by the Prins Bernhard Fellowship supported by the De Breed Kreiken innovation fund. Ton de Kok became my second promotor somewhat late in my PhD project, but has shown an active interest in my work from the beginning. I really enjoyed our many conversations on very diverse topics. I thank Onno Boxma, Stefan Minner, and Cees Witteveen for being on my thesis committee and their valuable feedback on my work. Qiushi Zhu was my office mate for almost three years. We had some great laughs and he was always patient enough to hear the boring details of my research problems. I thank all my current and former colleagues at the OPAC department for the good atmosphere and tea breaks. In particular, Claudine made for an excellent atmosphere in the E-corridor and she helped with many planning en technical problems (in the non-mathematical sense). When I was young, my parents taught me the value of getting a good education. I thank them for supporting me all the way to a PhD degree. My siblings were very influential in shaping my ideas about the quest for truth and the role of academic research in this quest. Doing a PhD can put quite some strain on family life and I thank my wife Heidi for supporting me in ways too numerous to mention. She performed a very thorough proofreading of the entire thesis and carefully checked my algebra when I was doing a long derivation and needed a second pair of eyes. My two sons were also instrumental in the moral support needed to complete a thesis. They make a short appearance in Chapter 5. Finally, I thank my Father in heaven for his support in all things. Contents 1 Introduction 1 1.1 Maintenance operations . 4 1.1.1 Maintenance strategies . 4 1.1.2 Uncertainty in maintenance operations . 6 1.1.3 Spare parts in maintenance operations . 7 1.1.4 Maintenance operations at NedTrain . 9 1.2 Spare part supply chains . 9 1.2.1 Repair and overhaul shops . 10 1.2.2 Performance measures . 11 1.2.3 Spare part supply chain at NedTrain . 11 1.3 Research objectives . 12 1.3.1 Framework . 12 1.3.2 Rotables, usage based maintenance and efficient utilization of resources . 12 1.3.3 Repairables, condition based maintenance, and repair lead time flexibility . 13 1.3.4 Consumables, emergency procedures . 14 1.4 Contributions of the thesis . 14 1.4.1 Rotable overhaul planning . 14 1.4.2 Repairable stocking and expediting under fluctuating demand . 16 1.4.3 Consumable stocking with emergency shipments . 18 1.5 Outline of the thesis . 19 2 Maintenance spare parts planning framework 21 2.1 Introduction . 21 2.2 Characterization of the environment . 24 2.2.1 Characterization of system maintenance . 24 2.2.2 Maintenance spare parts supply chain overview . 26 2.2.3 Demand characteristics of maintenance spare parts . 28 2.3 Framework for maintenance spare parts planning and control . 28 2.3.1 Assortment management . 29 2.3.2 Demand forecasting . 32 2.3.3 Parts returns forecasting . 34 2.3.4 Supply management . 35 2.3.5 Repair shop control . 38 2.3.6 Inventory control .
Load more

Recommended publications
  • Spare Parts Planning and Control for Maintenance Operations
    Spare Parts Planning and Control for Maintenance Operations This thesis is number D175 of the thesis series of the Beta Research School for Operations Management and Logistics. The Beta Research School is a joint effort of the School of Industrial Engineering and the department of Mathematics and Computer Science at Eindhoven University of Technology, and the Center for Production, Logistics and Operations Management at the University of Twente. A catalogue record is available from the Eindhoven University of Technology Library. ISBN: 978-90-386-3475-3 Printed by Proefschriftmaken.nl Uitgeverij BOXPress jj Cover Design by Roy Lurken - BureauNobel This research has been funded by NedTrain. Spare Parts Planning and Control for Maintenance Operations PROEFSCHRIFT ter verkrijging van de graad van doctor aan de Technische Universiteit Eindhoven, op gezag van de rector magnificus, prof.dr.ir. C.J. van Duijn, voor een commissie aangewezen door het College voor Promoties in het openbaar te verdedigen op maandag 11 november 2013 om 16.00 uur door Joachim Jacob Arts geboren te Eindhoven Dit proefschrift is goedgekeurd door de promotoren en de samenstelling van de promotiecommissie is als volgt: voorzitter: prof.dr. A.G.L. Romme 1e promotor: prof.dr.ir. G.J.J.A.N. van Houtum 2e promotor: prof.dr. A.G. de Kok leden: prof.dr.ir. O.J. Boxma prof.dr.ir. L.A.M. van Dongen (Universiteit Twente) prof.dr. R. Levi (Massachusetts Institute of Technology) prof.dr. S. Minner (Technische Universit¨atM¨unchen) prof.dr. C. Witteveen (Technische Universiteit Delft) Acknowledgments Although this thesis has only one author, it is in fact the result of contributions by many people.
    [Show full text]
  • In(Ventory) Control of Spare Parts at the Warehouse of the TD of Bolletje Almelo
    Master thesis Mayke Schutte In(ventory) control of spare parts at the warehouse of the TD of Bolletje Almelo Final report 11 July 2017 Mayke Schutte Master Thesis Industrial Engineering & Management University of Twente Bolletje B.V. I Master thesis Mayke Schutte II Master thesis Mayke Schutte VERSION Final report PUBLICATION DATE 11 July 2017 AUTHOR Mayke Schutte s1222910 [email protected] STUDY PROGRAM University of Twente Industrial Engineering and Management Specialization Production and Logistics Management Faculty of Behavioural, Management and Social Sciences GRADUATION COMMITTEE Dr. P. C. Schuur First Supervisor Faculty of Behavioural Management and Social Sciences Department Industrial Engineering and Business University of Twente Dr. Ir. A. Al Hanbali Second Supervisor Faculty of Behavioural Management and Social Sciences Department Industrial Engineering and Business University of Twente Dhr. G. Leeftink Company Supervisor Manager Technical Department Bolletje B.V. III Master thesis Mayke Schutte IV Master thesis Mayke Schutte Management summary This research is conducted during six months at the Technical Department (TD) of Bolletje Almelo, as a master thesis for the study Industrial Engineering & Management (IEM) with the specialization Production and Logistics Management (PLM) at the University of Twente. The goal of the TD of Bolletje Almelo is to let all production lines produce as good as possible by conducting an optimal inventory management which minimizes downtime and costs, and maximizes the availability of the machinery. The TD of Bolletje Almelo has its own warehouse to stock spare parts and an IT system called Rimses to register different activities such as usage of spare parts and maintenance tasks.
    [Show full text]
  • Integrated Product Support (IPS) Elements Guidebook Has Now Also Been Extensively Updated to Reflect Current Policy and Guidance
    Product Support Management IPS Elements Guidebook Forward In October 2009, Section 805 of Public Law 111-84 established the key leadership position of Product Support Manager (PSM) and reiterated DoD’s commitment to life cycle product support management. By 2010, the Office of the Assistant Secretary of Defense (ASD) Logistics and Materiel Readiness (L&MR) concluded the seminal work to develop and implement a Product Support Business Model (PSBM) and published a series of Guidebooks to assist the Product Support Manager (PSM) in the execution of his or her duties. These Guidebooks included the “DoD Product Support Manager Guidebook”, the “DoD Product Support Business Case Assessment (BCA) Guidebook” and the “DoD Logistics Assessment (LA) Guidebook”. Since 2010, the existing Product Support Guidebooks have been updated and a few new ones have been developed to fill information gaps. This Integrated Product Support (IPS) Elements Guidebook has now also been extensively updated to reflect current policy and guidance. It picks up where the Product Support Manager Guidebook Appendix A left off in describing the 12 IPS Elements. Program Managers, Product Support Managers and Life Cycle Logisticians should use this Guidebook as a reference source and training aid supporting their responsibilities, tailored to the needs of each program. The term “Integrated” in the term “Integrated Product Support Element” is critical. The Product Support Manager must understand how each element is affected by and linked with the others and should employ all
    [Show full text]
  • Dynamic Spare Part Control for Performance-Based Service Contracts
    Dynamic spare part control for performance-based service contracts - J.W. van den Bussche - University of Twente March, 2019 Enschede, The Netherlands Faculty Behavioural Management and Social Sciences Study programme Industrial Engineering and Management MSc Specialisation Production and Logistics Management Dynamic spare part control for performance-based service contracts Master thesis of Jasper W. van den Bussche BSc University supervisors Dr. M.C van der Heijden Dr. E. Topan Associate Professor Assistant Professor Contact: [email protected] Contact: [email protected] Company supervisors Ir. R.M. Ypma Ir. J.C. Bolhaar Logistic Engineer Workpackage Manager Thales Nederland B.V., Hengelo Thales Nederland B.V., Hengelo Preface To great satisfaction, I may announce that my final work as a student lays in front of you. This report describes the graduation research I did on the subject of after-sales logistics at Thales Nederland B.V which enabled me to accomplish the master’s programme Industrial Engineering and Management. The choice for this study followed from my interest in understanding and improving production and logistic processes with associated complexities. My interest in this industry is to a large extent the result of gathered experience during the bachelor’s programme Industrial Engineering and Management, in which I obtained the bachelor’s degree 2.5 years ago. After six months of working in the company of my former graduation research and travelling through Southeast Asia, it was time to start the masters. Thanks to Matthieu van der Heijden from the University of Twente, I could apply for the assignment at Thales which allowed me to start on time with the graduation research.
    [Show full text]
  • Driving Aftermarket Value: Upgrade Spare Parts Supply Chain Deloitte China Auto Industry Spare Parts Management Benchmark Survey White Paper
    Driving Aftermarket Value: Upgrade Spare Parts Supply Chain Deloitte China Auto Industry Spare Parts Management Benchmark Survey White Paper Deloitte Consulting Strategy & Operation - Human Capital - Information Technology Background Introduction "A business absolutely devoted to service will have only one worry about profits. They will be embar- rassingly large,” Henry Ford, founder of one of the world’s largest manufacturing companies, once said. The evidence suggests that the leading companies making efforts to abide by this concept have achieved success and been amply rewarded for their continuous investment in service. In today's automotive market, sound after-sales service has become a critical success factor in new car sales. At the same time, along with the sharp increase in customer numbers, spare parts and service business is creating reliable revenues and considerable profits for automotive companies. Since 2003, Deloitte Consulting has carried out a global after-sales and parts management benchmark study every two years, covering five major industries including automotive, aerospace manufacturing, and high-tech manufacturing among others. The latest benchmark study covers more than 137 corporations, including over 30 major automotive manufacturers, and provides benchmark guidance for spare parts management (SPM) in the global automotive industry. Leveraging Deloitte’s advanced global survey tools, Deloitte Consulting China conducted a nationwide SPM Benchmark Survey in China’s Automotive Industry this year, which aims at benchmarking and understanding spare parts management in China’s automotive industry. The survey mainly covers the overall strategic posi- tioning of the spare parts business, distribution network, forecasting and inventory planning, transportation and logistics management, IT system implementation, as well SPM KPI benchmarking.
    [Show full text]
  • Spare Parts Inventory Management in Warehouse: a Lean Approach
    International Journal of Industrial Engineering & Production Research June 2021 Vol. 32, No. 2: 1-11 DOI: 10.22068/ijiepr.32.2.1 RESEARCH PAPER Spare Parts Inventory Management In the Warehouse: A Lean Approach Rahul S Mor1*, Arvind Bhardwaj2, Vishal Kharka3 & Manjeet Kharub4 Received 25 August 2020; Revised 20 December 2020; Accepted 01 February 2021; © Iran University of Science and Technology 2021 ABSTRACT Inventory management plays a vital role in attaining the desired service level and prevents excess capital from being tied up in the form of dead stock. This paper presents a framework to effectively determine the items subject to obsolescence in an automotive spare parts warehouse. The inventory management techniques are applied to minimize the costs and a framework is proposed based on ABC-XYZ and FSN analysis to prioritize the spare parts based on their criticality. Further, the importance of items in the warehouse is carried out to eliminate the dead stock. The ABC classification findings reveal that A-class items accounted for 10.39% and hold the highest inventory value grouping. XYZ classification concludes that much priority should be given to the management of 52.7% of items under the Z category as the demand trend of these items is highly fluctuating. The N category items have no demand in recent times and need immediate attention, thereby preventing further unnecessary procurement. Thus, based on the ABC- XYZ and FSN analysis, the non-critical items, i.e., the non-moving items having fluctuating demand, are sorted out. KEYWORDS: Spare parts; Inventory; Warehouse; Lean manufacturing; ABC, XYZ, FSN analysis.
    [Show full text]
  • Suggestion of Spare Parts Inventory Theory Model in Army
    SCIENTIFIC PROCEEDINGS XXIII INTERNATIONAL SCIENTIFIC-TECHNICAL CONFERENCE "trans & MOTAUTO ’15" ISSN 1310-3946 SUGGESTION OF SPARE PARTS INVENTORY THEORY MODEL IN ARMY Assoc. prof. Eng. J. Furch, Ph.D. Faculty of Military Technology - University of Defence - Brno, the Czech Republic, E-mail: [email protected] Abstract: The article introduces a model which might be used for supplying spare parts of ground forces technical equipment to the Army of the Czech Republic. When designing inventory management, an Economic Order Quantity (EOQ) model is applied. It is a classical model used to determine stock order quantity. When setting the model, stock classification based on the ABC method and the EW matrix is made. Following the stock classification, for the Army of the Czech Republic we would suggest determining a signal stock level which is the same as for the Q-model of a stock management system. In this model used to optimize the stock we apply a dynamic model with absolutely determined stock movement, a dynamic multiproduct model where purchase cost is constant, and a dynamic model completed by a temporary unsatisfied demand. The important aspects which should be taken into consideration when setting an inventory model are stock purchase cost, storage costs, stock holding cost, or the cost which arise due to a short supply. KEYWORDS: ECONOMIC ORDER QUANTITY, INVENTORY THEORY MODEL, SPARE PARTS, P AND Q – SYSTEM OF SUPPLY CONTROL. 1. Introduction 2. Results of discussion - Design of Dynamic Inventory theory might be described as a set of mathematical Inventory Theory Model with Determined methods used to model and optimize the processes of generated Movement of Spare Parts items to ensure smooth company running.
    [Show full text]
  • Improving Air Force Purchasing and Supply Management of Spare Parts
    DISSERTATION R Improving Air Force Purchasing and Supply Management of Spare Parts Robert W. Bickel RAND Graduate School This document was submitted as a dissertation in August 2003 in partial fulfillment of the requirements of the doctoral degree in public policy analysis at the RAND Graduate School. The faculty committee that supervised and approved the dissertation consisted of Bart Bennett (Chair), Nancy Moore, and Susan Gates. The RAND Graduate School dissertation series reproduces dissertations that have been approved by the student’s dissertation committee. RAND is a nonprofit institution that helps improve policy and decisionmaking through research and analysis. RAND® is a registered trademark. RAND’s publications do not necessarily reflect the opinions or policies of its research sponsors. © Copyright 2003 RAND All rights reserved. No part of this book may be reproduced in any form by any electronic or mechanical means (including photocopying, recording, or information storage and retrieval) without permission in writing from RAND. Published 2003 by RAND 1700 Main Street, P.O. Box 2138, Santa Monica, CA 90407-2138 1200 South Hayes Street, Arlington, VA 22202-5050 201 North Craig Street, Suite 202, Pittsburgh, PA 15213-1516 RAND URL: http://www.rand.org/ To order RAND documents or to obtain additional information, contact Distribution Services: Telephone: (310) 451-7002; Fax: (310) 451-6915; Email: [email protected] iii Preface This dissertation is submitted to the RAND Graduate School in partial fulfillment of the requirements for the degree of Doctor of Philosophy in Policy Analysis. It was funded by Project Air Force and is part of the overall analytical support provided under the Project AIR FORCE study, “Designing, Implementing, and Evaluating a Purchasing and Supply Management (PSM) Demonstration for Engines,” sponsored by AF/IL-I and SAF/AQC.
    [Show full text]
  • Coordination Aspects of Supply Chain Management for Spare Parts
    Coordination Aspects of Supply Chain Management for Spare Parts Von der Fakultät für Ingenieurwissenschaften, Abteilung Maschinenbau und Verfahrenstechnik der Universität Duisburg-Essen genehmigte Dissertation zum Erwerb des akademischen Grades eines Doktors der Wirtschaftswissenschaften Dr. rer. pol. von Shivangi Verma aus Saharanpur, Indien Tag der mündlichen Prüfung: 12.06.2018 1. Gutachter: Univ. -Prof. Dr. rer. pol. Andreas Wömpener 2. Gutachter: Univ. -Prof. Dr. Ing. Bernd Noche Abstract Abstract A malfunctioning or failed part in a machine must be replaced as soon as possible with the same or a similar functioning part. On the one hand, it is required to have enough parts in stock to address customer requirements and avoid expensive downtimes and on the other hand, capital gets tied up in the form of non-revenue generating inventories. Finding the balance between servicing customers and reducing inventory costs is an imminent struggle for organisations large and small. This study aims at categorising spare parts into groups based on their characteristics like replenishment lead time, functional importance, unit costs etc. so as to determine the ‘optimal’ inventory policy for each group. Simulation optimisation methodology is developed for this problem of the two conflicting interests of service level and total costs and is implemented using MATLAB software. The program proposes the best inventory policy for all spare parts within a group and at the same time suggests the respective inventory policy parameters for each part within the group. The methodology is illustrated using an example with self-generated spare parts data. The thesis thus develops a structured approach to managing spare parts and helps to move from intuition-based to data-based inventory management and ordering behaviour for spare parts, that in some cases may cost millions of Euros.
    [Show full text]
  • A Theoretical Approach to Determining
    A THEORETICAL APPROACH TO DETERMINING SPARE PART SUPPORT FOR ANY GIVEN ORGANIZED OPERATION DISSERTATION Presented in Partial Fulfillment of the Requirements for the Degree Doctor of Philosophy in the Graduate School of The Ohio State University By WALTER ADOLPH BECKDAHL, M.B.A. ********** The Ohio State University 1959 Approved by t / 1 ' / /' V F / a ■ >.-• ,-y . /C/FF? U fj Advise iv ----- J- Department of Industrial Organization and Management TABLE OF CONTENTS Chapter Pa^je I INTRODUCTION .......................................... 1 II HISTORY.............................................. 15 III ..ILITARY COMPUTATION ACTIVITIES .............. 24 IV THE PROCESSES OF MILITARY REQUIREMENTS.............. 34 V THE LIFE EXPECTANCY OF PHYSICAL P R O P E R T Y ............ 42 VI INCREASES OR DECREASES IN THE EQUIPMENTUNIVERSE . 57 VII PROBABILITY THEORY AND ITS APPLICATION.............. 65 VIII ESSENTIALITY OF THE I T E M ................................ 77 IX THE EFFECTS OF TRANSPORTATION ON TOTAL REQUIREMENTS • • 83 X METHODOLOGY AND CONCLUSIONS .......................... 89 ii LIST OF FIGURES Figure Page 1 AM ILLUSTRATION OF FAILURE RATE COMPUTATION............. 44 2 FAILURE RATE CURVE FOR EQUIPMENT X ....................... 45 3 EQUIPMENT ' !i' .tEPLACE;-EFT iiATE......................... 47 h FAILURE iiATE AND liE PLACE; LENT RATE, ELECTRIC LIGHT BULBS . 48 5 SERVICE LIFE IN PERCENT OF AVERAGE L I F E ............... 52 6 SEVEN FAILURE RATE HISTOGRAMS ......................... 53 7 EQUIPMENT *!i* REPLACEMENT RATES WITH 1,000 UNITS ADDED . 59 8 HISTOGRAM OF ANNUAL PRODUCTION........................... 67 9 TABLES OF PROBABILITY................................. 69 10 POISSON CUMULATIVE DISTRIBUTION C U R V E ................. 75 11 HYPOTHETICAL CONTINGENCY KIT PROBLEM.................... 79 12 COMPUTATION OF A MAXIMUM PROTECTION L EVEL............... 80 iii CHAPTER I INTRODUCTION The study of management is relatively new and is a product of our modern times.
    [Show full text]
  • Challenges and Development Opportunities of Supply Chain Process in Spare Part Services
    Aalto University School of Electrical Engineering Degree Programme in Electronics and Electrical Engineering Heidi Burman Challenges and Development Opportunities of Supply Chain Process in Spare Part Services Master's Thesis 23th of May 2016 Supervisor Professor Matti Vartiainen Advisor Martin Malmi, M. Sc. (Econ. & Bus. Admin.) Aalto University School of Electrical Engineering ABSTRACT OF Degree Programme in Electronics and Electrical Engineering MASTER’S THESIS Author: Heidi Burman Title: Challenges and Development Opportunities of Supply Chain Process in Spare Part Services Date: May 23th, 2016 Pages: 10 + 104 Major: Bionics Code: S3006 Supervisor: Professor Matti Vartiainen Advisor: Martin Malmi, M. Sc. (Econ. & Bus. Admin.) Companies must be able to develop their business processes in order to maintain their competitiveness. Core processes are the activities that relate directly to the product of a company and therefore contribute to the creation of value in the company. A supply chain is a cross-organizational core process that can be managed usingprocess management theories and practises.In today’s highly competitive environment, customers are demanding increasingly shorter lead times, supply chain flexibility and real -time tracking possibilities for their orders. This putshuge pressure on the companies to create fast- reactive supply chains that can answer to these customer requirements. In spare part business, the demand can be sporadic and volatile in nature. This makes spare part supply chains especially difficult subjects to manage and control. In spare part business, the fast availability and reliable service are keys to achieving customer satisfaction. The subject of this research was the largest supplier of industrial cranes in the world.
    [Show full text]
  • Logistics Network Study for Spare Parts Distribution in APA Area
    LUT University School of Engineering Science Industrial Engineering and Management Supply Chain and Operations Management Master’s Thesis Logistics Network Study for Spare Parts Distribution in APA area Pekka Pellikka 2018 Supervisor: Professor Janne Huiskonen Instructor: Anselmi Tuominen ABSTRACT Author: Pekka Pellikka Title: Logistics Network Study for Spare Parts Distribution in APA area Year: 2018 Place: Lappeenranta Master’s Thesis. LUT University, School of Engineering Science, Industrial Engineering and Management, Supply Chain and Operations Management. 159 pages, 31 figures, 46 tables and 4 appendices Supervisor: Professor Janne Huiskonen Instructor: Anselmi Tuominen Keywords: logistics network study, global distribution, spare parts, APA area, distribution development, strategic network design, service business, supply chain management The purpose of this thesis was to investigate KONE GSS’ spare parts distribution and related structural elements i.e. distribution network, warehouses and transportations. The case company has encountered challenges in its APA area distribution in terms of responsiveness, efficiency and profitability, which are now pursued to be tackled by this study. In this respect, various distribution systems and their structural solutions can serve customers differently. Nevertheless, the costs usually form various trade-offs with the capital and service factors between which, in equilibrium, companies must create a suitable distribution implementation for themselves. The aim of the thesis was to model and explore the case company’s current state of distribution, and on this basis try to find out what could be the best way to distribute spare parts in this target area for the future. In the study, the current state of distribution was initially analyzed and, based on this, various conclusions were made, on the grounds of which in conjunction with the frameworks provided by the theory alternative distribution network solutions were outlined.
    [Show full text]