SOLUTIONS Military & Law Enforcement Training Accessories Rifles Pistols / Grenade Anhr 20 Launchers 43 40 4
Total Page:16
File Type:pdf, Size:1020Kb
GLOBAL DEFENSE SOLUTIONS military & law enforcement P226 Pistols 4 Rifles / Grenade Launchers 20 Accessories 40 ONTENTS C Training 43 MISSION CrITICAL rELIABILITy AND ACCUrACy, kNOwN ThE wOrLD OvEr. SiG SAueR® reliability and accuracy are called upon to perform every day, without fail, for countless law enforcement and military professionals, the world over. This heritage of excellence is built into every pistol, rifle, and accessory designed and manufactured by our global network of companies – SiG SAueR GmbH in Germany, Swiss Arms AG in Switzerland, and SiG SAueR, inc. in the united States. Our ongoing commitment to engineered excellence and superiority, has made SiG SAueR firearms the choice for many government and elite military forces throughout the world. The SG 550 line of tactical rifles, produced by Swiss Arms, has achieved the much sought after designation of “suitable for troops” by the Swiss Armed Forces. Our P250 modular pistol was awarded ulm Certification by the German government, and in the united States, one in every three law enforcement professionals relies on a SiG SAueR sidearm. Armed professionals everywhere put their trust in our entire line of tactical firearms to perform when it counts. when it counts™ SIGSAUER.COM 3 PISTOLSThe SiG SAueR® legacy of unmatched reliability and accuracy can be found in every Classic line and polymer pistol we design and manufacture. Our reputation for innovation and engineering can trace its beginnings to the P49™, the Swiss Army’s pistol of choice and predecessor to the P210®. The SiG SAueR commitment to quality has more recently resulted in the selection of the SP2022® as the standard issue service duty pistol for both the French and Colombian National Police forces. The legacy continues with such advancements as our new ergonomically contoured one- piece, reduced-reach grips on our P226® and P229® Classic pistols. Slides are machined from a solid block of stainless steel, then heat treated and Nitron® coated for added surface hardness and corrosion resistance. Full-length guide rails provide strength. Military grade carbon steel barrels are durable and accurate. High-strength recoil springs and full-length guide rods increase reliability. High capacity magazines feature a rugged corrosion resistant finish. CLASSIC LINE FEATUrES Frames feature smooth, snag-free exteriors Contrast sights or self-illuminating SIGLITE® Night Sights are available and interchangeable. Black hard coat anodize alloy frames on Classic models are durable, but lightweight. Ergonomically contoured, one piece, reduced-reach grip, designed to comfortably fit a wide range of hand sizes. A rELENTLESS COMMITMENT TO ENGINEErED rELIABILITy GOES INTO EvEry PISTOL SIGSAUER.COM wE DESIGN AND MANUFACTUrE. 5 P220 ® P220 ThE ULTIMATE .45ACP SEMI-AUTOMATIC SErvICE PISTOL, the P220 has remained the most accurate .45ACP right out-of-the-box since its introduction in 1976. Built around a full-size frame, the P220 is a reliable and durable pistol for law enforcement or military units requiring .45ACP caliber performance. Beavertail frame Threaded barrel P220 with Beavertail P220 Carry P220 Carry P220 Compact FEATUrES Mechanically locked, recoil-operated .45ACP, semi-automatic P220 SpeCifiCAtiOnS 4-point safety system with patented full-Size Carry Compact automatic firing pin lock, frame-mounted Caliber .45ACP decocking lever, safety intercept notch, and trigger bar disconnector Magazine Capacity 8 8 6 Available in DA/SA, DAK™, or SRT™ trigger pull = DA/SA 45 N/20 N; SAO** 23 N; DAK 34 N (Short Reset Trigger) configurations (A) Overall Length 195.6 mm 180.3 mm 180.3 mm integral accessory rail (B) Overall Height 139.7 mm 139.7 mm 127 mm Available in Nitron® finish Overall Width 38.1 mm 38.1 mm 38.1 mm Barrel Length 111.8 mm 99.1 mm 99.1 mm Sight Radius 160.0 mm 144.8 mm 144.8 mm Sights Contrast or SiGLiTe® Night Sights Weight with Magazine 862 g 862 g 839 g frame Material Alloy B frame finish Black Hard Coat Anodize SIGSAUER.COM Slide Material Stainless Steel Slide finish Nitron A Grips Polymer **SAO not available on Compact models. =10 N = 1 kg approx. Specifications are approximate and subject to change. 7 P226 ® P226ThE P226 IS ThE STANDArD By whICh ALL OThEr COMBAT hANDGUNS ArE jUDGED. elite military and government forces have chosen the full-size P226 for its exceptional durability, balance, and ergonomics. Beavertail frame New enhanced ergonomic, one-piece grip provides a better fit for a variety of hand sizes. P226 TACOPS FEATUrES Mechanically locked, recoil-operated semi-automatic P226 4-point safety system with patented automatic firing pin lock, frame- mounted decocking lever, safety intercept notch, and trigger bar disconnector Available in DA/SA, DAK™, or SRT™ (Short Reset Trigger) configurations P226 SpeCifiCAtiOnS Available in 9mm, .357SiG, and .40S&W Caliber 9mm .357SiG .40S&W .357SiG and .40S&W feature caliber interchangeability Magazine Capacity 15 12 12 integral accessory rail trigger pull = DA/SA 45 N/20 N; DAK 34 N Available in Nitron® finish (A) Overall Length 195.6 mm 195.6 mm 195.6 mm (B) Overall Height 139.7 mm 139.7 mm 139.7 mm Overall Width 38.1 mm 38.1 mm 38.1 mm Barrel Length 111.8 mm 111.8 mm 111.8 mm Sight Radius 160.0 mm 160.0 mm 160.0 mm Sights Contrast or SiGLiTe® Night Sights Weight with Magazine 964 g 964 g 964 g frame Material Alloy B frame finish Black Hard Coat Anodize SIGSAUER.COM Slide Material Stainless Steel Slide finish Nitron A Grips Polymer =10 N = 1 kg approx. Specifications are approximate and subject to change. 9 ® P229ThE P229 PrOvIDES ThE DUrABILITy, BALANCE, AND ErGONOMICS OF OUr FULL-SIzE P226® IN A ShOrTEr BArrEL DESIGN. This proven compact pistol is available in 9mm, .357SiG, and .40S&W. P229 B New enhanced ergonomic, one- piece grip provides a better fit for a variety of hand sizes. A P229 P229 SpeCifiCAtiOnS Caliber 9mm .357SiG .40S&W FEATUrES Magazine Capacity 15 12 12 Mechanically locked, recoil-operated semi-automatic trigger pull = DA/SA 45 N/20 N; DAK 34 N 4-point safety system with patented automatic (A) Overall Length 180.3 mm 180.3 mm 180.3 mm firing pin lock, frame-mounted decocking lever, safety intercept notch, and trigger bar disconnector (B) Overall Height 137.2 mm 137.2 mm 137.2 mm Available in DA/SA, DAK™, or SRT™ (Short Reset Overall Width 38.1 mm 38.1 mm 38.1 mm Trigger) configurations Barrel Length 99.1 mm 99.1 mm 99.1 mm Available in 9mm, .357SiG, and .40S&W Sight Radius 144.8 mm 144.8 mm 144.8 mm .357SiG and .40S&W feature caliber interchangeability Sights Contrast or SiGLiTe® Night Sights integral accessory rail Weight with Magazine 907 g 907 g 907 g Available in Nitron® finish frame Material Alloy frame finish Black Hard Coat Anodize Slide Material Stainless Steel Slide finish Nitron Grips Polymer =10 N = 1 kg approx. Specifications are approximate and subject to change. ® P239 ThE CONCEALED CArry PISTOL DESIGNED SPECIFICALLy FOr ThE DEMANDS OF ArMED PrOFESSIONALS. With your choice of 9mm, .357SiG or .40S&W calibers, the P239 is ideal for backup both on and off duty. P239 B B P239 DAK A P229 SpeCifiCAtiOnS P239 SpeCifiCAtiOnS Caliber 9mm .357SiG .40S&W Magazine Capacity 8 7 7 P239 SAS™ Gen 2 trigger pull = DA/SA 45 N/20 N; DAK 34 N (A) Overall Length 167.6 mm 167.6 mm 167.6 mm (B) Overall Height 129.5 mm 129.5 mm 129.5 mm FEATUrES Overall Width 38.1 mm 38.1 mm 38.1 mm Mechanically locked, recoil-operated semi-automatic Barrel Length 91.4 mm 91.4 mm 91.4 mm elongated trigger guard Sight Radius 132.1 mm 132.1 mm 132.1 mm Abbreviated half-spur hammer Sights Contrast or SiGLiTe® Night Sights 4-point safety system with patented automatic firing pin lock, frame-mounted decocking lever, Weight with Magazine 836 g 836 g 836 g safety intercept notch, and trigger bar disconnector frame Material Alloy SIGSAUER.COM Available in 9mm, .357SiG, and .40S&W frame finish Black Hard Coat Anodize Available in DA/SA, DAK™, or SRT™ (Short Reset Slide Material Stainless Steel Trigger) configurations Slide finish Nitron or Stainless .357SiG and .40S&W feature caliber interchangeability Grips Polymer Available in Nitron® or Two-Tone finish 10 N = 1 kg approx. =10 N = 1 kg approx. Specifications are approximate and subject to change. Specifications are approximate and subject to change. 11 ® P232ThE ACCUrACy, BALANCE, rELIABILITy, AND SAFETy rEQUIrED FrOM A SErvICE DUTy SIDEArM, in a sleek, compact package ideal for off-duty protection. With rounded edges, the P232 is easy to draw from any holster position. P232 B A P232 P232 SpeCifiCAtiOnS Caliber .380ACP (9mm short) Magazine Capacity 7 trigger pull = DA/SA 45 N/20 N (A) Overall Length 167.6 mm P232 Two-Tone (B) Overall Height 119.4 mm Overall Width 33.0 mm FEATUrES Barrel Length 91.4 mm Compact, contoured, single-stack 7-round capacity pistol Fixed barrel blow-back action on an alloy or stainless steel frame Sight Radius 121.9 mm Contrast or Sights 4-point safety system with patented automatic firing pin lock, SiGLiTe® Night Sights frame-mounted decocking lever, safety intercept notch, and trigger 524 g (Nitron & Two-Tone) Weight with Magazine bar disconnector 669 g (Stainless) .380ACP (9mm short) frame Material Alloy or Stainless DA/SA trigger frame finish Black Hard Coat Anodize or Stainless Available in Nitron®, Two-Tone, and Stainless finish Slide Material Stainless Slide finish Nitron or Stainless Grips Hogue Rubber =10 N = 1 kg approx. Specifications are approximate and subject to change.