Welcome from the Conference Chairs Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Chairs/Committees
Track Organizers
Topic Organizers
Session Organizers
Reviewers
ASME/JSME 8th Thermal Engineering Joint Conference Program (AJTEC2011)
1 Copyright © 2011 by ASME WELCOME FROM THE CONFERENCE CHAIRS
The American Society of Mechanical Engineers (ASME) and the Japan Society of Mechanical Engineers (JSME) have co-developed a successful series of joint conferences on thermal engineering at four-year intervals. AJTEC 2011 is the 8th ASME/JSME Thermal Engineering Joint Conference. The previous conferences in this series were held in: Honolulu, Hawaii (1983 and 1987); Reno, Nevada (1991); Maui, Hawaii (1995); San Diego, California (1999); Hawaii Island, Hawaii (2003); and Vancouver, Canada (2007). AJTEC 2011 will be held again in Honolulu Hawaii. Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 The Key Themes of AJTEC 2011 are “Fundamental” and “Interdisciplinary” with a vision for the future of Thermal Engineering.
The 20th century is, in many ways symbolized by the phrases “Division” and “Development”. In the early part of the century, engineers divided systems into their most fundamental elements for purpose of study. As the century progressed, scientific understanding enabled the enormous development of many new technologies.
In the dawn of the new century, thermal engineers will be required to attain a better understanding of fundamental phenomena governing complex and integrated mechanical, chemical, and energy systems. As such, we must increase our efforts to integrate thermal engineering with other disciplines, and broaden our perspective to include an ever-widening range of time scales (from ultra rapid to long term) and length scales (from nanoscale to global). Such efforts require a strong collective will from the thermal engineering community to engage new technological challenges and to collaborate with scientists and engineers from other disciplines to meet these challenges with unique and innovative solutions. The 21st century has opened the gate for this new direction and the thermal engineering community appears ready and willing to embrace the challenges that lie ahead.
The objective of the AJTEC 2011 conference is to provide an international forum for the exchange of such new ideas and direction as described above and the presentation of the latest work in the field. We strongly encourage attendance and paper submission from sister societies around the globe including those from ASME and JSME.
Koichi Hishida, Keio University, Conference Co-Chair (JSME) James Klausner, University of Florida, Conference Co-Chair (ASME) Isao Satoh, Tokyo Institute of Technology, Secretary-General
2 CHAIRS/ORGANIZING COMMITTEE
CHAIR PERSONS SECRETARY-GENERAL
Koichi Hishida, Keio University Isao Satoh, Tokyo Institute of Technology James Klausner, University of Florida
Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021
COMMITTEE MEMBERS
Amanie Abdelmessih, Saint Martin's University Kazuyoshi Nakabe, Kyoto University Alexis Abramson, Case Western Reserve University Vinod Narayanan, Oregon State University Fumiteru Akamatsu, Osaka University Arvind Narayanaswamy, Columbia University Kalyan Annamalai, Texas A&M University Chang Oh, Idaho National Laboratory Julie Asfia, Boeing Company Taku Ohara, Tohoku University Debjyoti Banerjee, Texas A&M University Keunhan (Kay) Park, University of Rhode Island Alex Brown, Sandia National Laboratories Yoav Peles, Rensselaer Polytechnic Institute Qingjun (Steve) Cai, Teledyne Scientific Leslie Phinney, Sandia National Laboratories Takemi Chikahisa, Hokkaido University Joel Plawsky, Rensselaer Polytechnic Institute Yaroslav Chudnovsky, Gas Technology Institute T.S. Ravigururajan, Wichita State University Baratunde Cola, Georgia Institute of Technology Shripad T. Revankar, Purdue University Ingrid Cotoros, Lockheed Martin Xiulin Ruan, Purdue University John Crepeau, University of Idaho Takushi Saito, Tokyo Institute of Technology Hirofumi Daiguji, The University of Tokyo Jun Sakakibara, University of Tsukuba Mohamed El-Genk, University of New Mexico Atsushi Sakurai, Niigata University Ofodike A. Ezekoye, University of Texas Laura Schaefer, University of Pittsburgh Yoshimichi Hagiwara, Kyoto Institute of Technology Mitra Sexton, Knolls Atomic Power Laboratory Tatsuya Hasegawa, Nagoya University S.A. Sherif, University of Florida Leiyong Jiang, National Research Council Canada Masahiko Shibahara, Osaka University Amir Jokar, ThermoFluids Tech Naoki Shikazono, The University of Tokyo Kris L Jorgensen, The Babcock & Wilcox Co. Ryo Shirakashi, The University of Tokyo Yasuo Kawaguchi, Tokyo University of Science Ali Siahpush, Idaho National Laboratory Masahiro Kawaji, City College of New York Alex da Silva, University of Texas at Austin Hideaki Kobayashi, Tohoku University Manohar Sohal, Idaho National Laboratory Atsuki Komiya, Tohoku University Kazuhiro Suga, Osaka Prefecture University Shigeru Koyama, Kyushu University Yuji Suzuki, The University of Tokyo Tomoaki Kunugi, Kyoto University Shigeru Tada, National Defense Academy Ben Q. Li, University of Michigan Masato Tagawa, Nagoya Institute of Technology Wei Li, Zhejiang University Yasuyuki Takata, Kyushu University Wojciech Lipinski, University of Minnesota Mamoru Tanahashi, Tokyo Institute of Technology Raj M. Manglik, University of Cincinnati Eiji Tomita, Okayama University Kaoru Maruta, Tohoku University Shohji Tsushima, Tokyo Institute of Technology Shigeo Maruyama, The University of Tokyo Erol Ulucakli, Lafayette College Yukihiko Matsumura, Hiroshima University Xinwei Wang, Iowa State University Alan McGaughey, Carnegie Mellon University Brent Webb, Brigham Young University Kunal Mitra, Florida Institute of Technology Jun Yamada, Shibaura Institute of Technology Koji Miyazaki, Kyushu Institute of Technology Kenji Yasuoka, Keio University Michael Modest, UC Merced Theodore Zannis, Hellenic Naval Academy Arun Muley, Koch Heat Transfer Zhuomin Zhang, Georgia Institute of Technology Yuji Nagasaka, Keio University Chenn Zhou, Purdue University Calumet
3 TRACK ORGANIZERS
TRACK 1 FUNDAMENTALS OF HEAT AND MASS TRANSFER
Track Chair: Kazuyoshi Nakabe, Kyoto University Email: [email protected]
Track Co-Chair: Raj M. Manglik, University of Cincinnati Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Email: [email protected]
Track Co-Chair: Chang Oh, Idaho National Laboratory Email: [email protected]
TRACK 2 COMBUSTION AND ENERGY SYSTEMS
Track Chair: Mamoru Tanahashi, Tokyo Institute of Technology Email: [email protected]
Track Co-Chair: S.A. Sherif, University of Florida Email: [email protected]
Track Co-Chair: Mohamed El-Genk, University of New Mexico Email: [email protected]
TRACK 3 MICRO/NANO SCALE PHENOMENA AND THERMAL PROPERTIES
Track Chair: Shigeo Maruyama, Department of Mechanical Engineering, The University of Tokyo Email: [email protected]
Track Co-Chair: Taku Ohara, Tohoku University Email: [email protected]
Track Co-Chair: Leslie Phinney, Sandia National Laboratories Email: [email protected]
Track Co-Chair: Alexis Abramson, Case Western Reserve University Email: [email protected]
TRACK 4 KEYNOTE ADDRESSES
Track Chair: Kenji Yasuoka, Keio University Email: [email protected]
Track Co-Chair: James Klausner, University of Florida Email: [email protected]
4 TOPIC ORGANIZERS
TRACK 1 FUNDAMENTALS OF HEAT AND MASS TRANSFER
Topic 1-1 Convective Heat and Mass Transfer Topic Organizer: Kazuyoshi Nakabe, Kyoto University Email: [email protected] Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Topic Co-Organizer: Yasuo Kawaguchi, Tokyo University of Science Email: [email protected]
Topic Co-Organizer: Amanie Abdelmessih, Saint Martin's University Email: [email protected]
Topic Co-Organizer: Yaroslav Chudnovsky, Gas Technology Institute Email: [email protected]
Topic Co-Organizer: Alex da Silva, University of Texas at Austin Email: [email protected]
Topic Co-Organizer: Julie Asfia, Boeing Company Email: [email protected]
Topic 1-2 Computational Heat and Mass Transfer Topic Organizer: K. Suga, Osaka Prefecture University Email: [email protected]
Topic Co-Organizer: Mitra Sexton, Knolls Atomic Power Laboratory Email: [email protected]
Topic Co-Organizer: Laura Schaefer, University of Pittsburgh Email: [email protected]
Topic 1-3 Phase Change Phenomena and Heat Transfer Topic Organizer: Yasuyuki Takata, Kyushu University Email: [email protected]
Topic Co-Organizer: Amir Jokar, ThermoFluids Tech Email: [email protected]
Topic Co-Organizer: Joel Plawsky, Rensselaer Polytechnic Institute Email: [email protected]
Topic 1-4 Multi-Phase Heat and Mass Transfer Topic Organizer: Tomoaki Kunugi, Kyoto university Email: [email protected]
Topic Co-Organizer: Yoshimichi Hagiwara, Kyoto Institute of Technology Email: [email protected]
Topic Co-Organizer: M. Erol Ulucakli, Lafayette College Email: [email protected]
5 Topic Co-Organizer: Ali Siahpush, INL Email: [email protected]
Topic Co-Organizer: John Crepeau, University of Idaho Email: [email protected]
Topic Co-Organizer: Masahiro Kawaji, City College of New York Email: [email protected]
Topic 1-5 Radiative Heat Transfer Topic Organizer: Jun Yamada, Shibaura Institute of Technology Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Email: [email protected]
Topic Co-Organizer: Atsushi Sakurai, Niigata University Email: [email protected]
Topic Co-Organizer: Michael Modest, UC Merced Email: [email protected]
Topic Co-Organizer: Brent Webb, Brigham Young University Email: [email protected]
Topic 1-6 Biological Heat and Mass Transfer Topic Organizer: Ryo Shirakashi, The University of Tokyo Email: [email protected]
Topic Co-Organizer: Kunal Mitra, Florida tech Email: [email protected]
Topic Co-Organizer: Shigeru Tada, National Defense Academy Email: [email protected]
Topic 1-7 Heat and Mass Transfer in Micro-Scale Systems Topic Organizer: Yuji Suzuki, The University of Tokyo Email: [email protected]
Topic Co-Organizer: Debjyoti Banerjee, Texas A&M University Email: [email protected]
Topic Co-Organizer: Vinod Narayanan, Oregon State University Email: [email protected]
Topic 1-8 Measurements and Diagnostics Topic Organizer: Masato Tagawa, Nagoya Institute of Technology Email: [email protected]
Topic Co-Organizer: Jun Sakakibara, Univ Tsukuba Email: [email protected]
Topic Co-Organizer: Shripad T. Revankar, Purdue University Email: [email protected]
Topic Co-Organizer: Raj M. Manglik, University of Cincinnati Email: [email protected]
6 Topic Co-Organizer: Atsuki Komiya, Tohoku University Email: [email protected]
Topic 1-9 Heat Transfer in Manufacturing Topic Organizer: Ben Li, University of Michigan Email: [email protected]
Topic Co-Organizer: T. S. Ravigururajan, Wichita State University Email: [email protected]
Topic Co-Organizer: Takushi Saito, Tokyo Institute of Technology Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Email: [email protected]
Topic Co-Organizer: Wei Li, Zhejiang University Email: [email protected]
TRACK 2 COMBUSTION AND ENERGY SYSTEMS
Topic 2-1 Heat and Mass Transfer in Turbulent Combustion Topic Organizer: Tatsuya Hasegawa
Topic Co-Organizer: Hideaki Kobayashi, Tohoku University Email: [email protected]
Topic Co-Organizer: Mamoru Tanahashi, Tokyo Institute of Technology Email: [email protected]
Topic Co-Organizer: Leiyong Jiang, NRCC Email: [email protected]
Topic Co-Organizer: Alex Brown, Sandia National Labs Email: [email protected]
Topic Co-Organizer: O. A. Ezekoye, University of Texas Email: [email protected]
Topic 2-2 Heat and Mass Transfer in Combustion Systems Topic Organizer: Kaoru Maruta, Tohoku University Email: [email protected]
Topic Co-Organizer: Fumiteru Akamatsu, Osaka University Email: [email protected]
Topic Co-Organizer: Kris L. Jorgensen, The Babcock & Wilcox Company Email: [email protected]
Topic Co-Organizer: Chenn zhou, Purdue University Calumet Email: [email protected]
Topic 2-3 Heat and Mass Transfer in IC Engines Topic Organizer: Takemi Chikahisa, Hokkaido University Email: [email protected]
7 Topic Co-Organizer: Eiji Tomita, Okayama University Email: [email protected]
Topic Co-Organizer: Theodore Zannis, Hellenic Naval Academy Email: [email protected]
Topic Co-Organizer: Arun Muley
Topic 2-4 Heat and Mass Transfer in Energy Devices Topic Organizer: Naoki Shikazono, The University of Tokyo Email: [email protected] Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021
Topic Co-Organizer: Shohji Tsushima, Tokyo Institute of Technology Email: [email protected]
Topic Co-Organizer: Julie Asfia, Boeing Company Email: [email protected]
Topic Co-Organizer: Wojciech Lipinski, University of Minnesota Email: [email protected]
Topic Co-Organizer: Jessica Shi, Electric Power Research Institute Email: [email protected]
Topic 2-5 Heat and Mass Transfer in Air Conditioning and Refrigeration Topic Organizer: Shigeru Koyama
Topic Co-Organizer: S.A. Sherif, University of Florida Email: [email protected]
Topic 2-6 Heat and Mass Transfer in Reaction Systems Topic Organizer: Yukihiko Matsumura, Hiroshima University Email: [email protected]
Topic Co-Organizer: Kalyan Annamalai, Texas A&M University Email: [email protected]
TRACK 3 MICRO/NANO SCALE PHENOMENA AND THERMAL PROPERTIES
Topic 3-1 Transport Phenomena in Nano and Molecular Scale Systems Topic Organizer: Shigeo Maruyama, Department of Mechanical Engineering, The University of Tokyo Email: [email protected]
Topic Co-Organizer: Taku Ohara, Tohoku University Email: [email protected]
Topic Co-Organizer: Alan McGaughey, Carnegie Mellon University Email: [email protected]
Topic Co-Organizer: Xiulin Ruan, Purdue University Email: [email protected]
Topic Co-Organizer: Xinwei Wang, Iowa State University Email: [email protected]
8 Topic 3-2 Transport Phenomena in Nano-Scale Energy Systems Topic Organizer: Masahiko Shibahara, Osaka University Email: [email protected]
Topic Co-Organizer: Hirofumi Daiguji, The University of Tokyo Email: [email protected]
Topic Co-Organizer: Kenji Yasuoka, Keio University Email: [email protected]
Topic Co-Organizer: Qingjun (Steve) Cai, Teledyne Scientific Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Email: [email protected]
Topic Co-Organizer: Arvind Narayanaswamy, Columbia University Email: [email protected]
Topic Co-Organizer: Baratunde Cola, Georgia Institute of Technology Email: [email protected]
Topic Co-Organizer: Yoav Peles, R.P.I Email: [email protected]
Topic 3-3 Thermal Properties at the Micro/Nano-Scale Topic Organizer: Yuji Nagasaka, Keio University Email: [email protected]
Topic Co-Organizer: Koji Miyazaki, Kyushu Institute of Technology Email: [email protected]
Topic Co-Organizer: Manohar Sohal, Idaho National Laboratory Email: [email protected]
Topic Co-Organizer: Zhuomin Zhang, Georgia Institute of Technology Email: [email protected]
Topic Co-Organizer: Ingrid Cotoros, Lockheed Martin, Advanced Technology Center Email: [email protected]
Topic Co-Organizer: Keunhan (Kay) Park, University of Rhode Island Email: [email protected]
Topic Co-Organizer: Yoav Peles, R.P.I Email: [email protected]
9 SESSION ORGANIZERS
TRACK 1 FUNDAMENTALS OF HEAT AND MASS TRANSFER
Topic 1-1 Convective Heat and Mass Transfer
Session 1-1-1 Enhanced Convection-1
Session Organizer: Amanie Abdelmessih, Saint Martin's University Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Email: [email protected]
Session Co-Organizer: Julie Asfia, Boeing Company Email: [email protected]
Session Co-Organizer: Kyoji Inaoka, Doshisha University Email: [email protected]
Session 1-1-2 Non-Newtonian Convection Session Organizer: Julie Asfia, Boeing Company Email: [email protected]
Session Co-Organizer: Kazuyoshi Nakabe, Kyoto University Email: [email protected]
Session 1-1-3 Single Phase Convection-1 Session Organizer: Masaaki Motozawa, Tokyo University of Science Email: [email protected]
Session Co-Organizer: Yaroslav Chudnovsky, Gas Technology Institute Email: [email protected]
Session 1-1-4 Natural Convection-1 Session Organizer: Alex da Silva, University of Texas at Austin Email: [email protected]
Session Co-Organizer: Yasuo Kawaguchi, Tokyo University of Science Email: [email protected]
Session 1-1-5 Natural/Mixed Convection Session Organizer: Yaroslav Chudnovsky, Gas Technology Institute Email: [email protected]
Session Co-Organizer: Tetsuaki Takeda, University of Yamanashi Email: [email protected]
Session 1-1-6 Enhanced Convection-2 Session Organizer: Qiusheng Liu, Kobe University Email: [email protected]
Session 1-1-7 Enhanced Convection-3 Session Organizer: Kazuya Tatsumi, Kyoto University Email: [email protected]
10 Session Co-Organizer: Amanie Abdelmessih, Saint Martin's University Email: [email protected]
Session 1-1-8 Single Phase Convection-2 Session Organizer: Kenichiro Takeishi, Osaka University Email: [email protected]
Session Co-Organizer: M. Erol Ulucakli, Lafayette College Email: [email protected]
Session 1-1-9 Single Phase Convection-3 Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Session Organizer: Kaoru Iwamoto, Tokyo University of Agriculture and Technology Email: [email protected]
Session Co-Organizer: Ben Li, University of Michigan Email: [email protected]
Session 1-1-10 Single Phase Convection-4 Session Organizer: Yutaka Oda, Osaka University Email: [email protected]
Session Co-Organizer: Kenneth Kihm, University of Tennessee Email: [email protected]
Session 1-1-11 Natural Convection-2 Session Organizer: Takashi Masuoka, Kyushu University Email: [email protected]
Session Co-Organizer: Chenn Zhou, Purdue University Calumet Email: [email protected]
Topic 1-2 Computational Heat and Mass Transfer
Session 1-2-1 Computational Heat and Mass Transfer (Thermal CFD)-1 Session Organizer: Tomoya Houra, Nagoya Institute of Technology Email: [email protected]
Session Co-Organizer: Vinod Narayanan, Oregon State University Email: [email protected]
Session 1-2-2 Computational Heat and Mass Transfer (Multiphase Flows & Interface Issues)-1 Session Organizer: Masayuki Kaneda, Osaka Prefecture University Email: [email protected]
Session Co-Organizer: Kwang-Yong Kim, Inha University Email: [email protected]
Session 1-2-3 Computational Heat and Mass Transfer (Mixed & Natural Convection) Session Organizer: K. Suga, Osaka Prefecture University Email: [email protected]
Session Co-Organizer: Timothy Fisher, Air Force Research Laboratory, Materials and Manufacturing Directorate Email: [email protected]
11 Session 1-2-4 Computational Heat and Mass Transfer (Heat Exchangers)-1 Session Organizer: Takuto Araki, Yokohama National University Email: [email protected]
Session Co-Organizer: Laura Schaefer, University of Pittsburgh Email: [email protected]
Session 1-2-5 Computational Heat and Mass Transfer (Numerical Schemes & Algorithms)-1 Session Organizer: Kosuke Nishida, Kyoto Institute of Technology Email: [email protected] Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021
Session Co-Organizer: Ashley Emery, University of Washington Email: [email protected]
Session 1-2-6 Computational Heat and Mass Transfer (High Temperature Issues) Session Organizer: Naoya Fukushima, Tokyo Institute of Technology Email: [email protected]
Session Co-Organizer: Laura Schaefer, University of Pittsburgh Email: [email protected]
Session 1-2-7 Computational Heat and Mass Transfer (Heat Conduction & Diffusion)-1 Session Organizer: Sandip Mazumder, Ohio State University Email: [email protected]
Session Co-Organizer: Ichiro Ueno, Tokyo University of Science Email: [email protected]
Session 1-2-8 Computational Heat and Mass Transfer (Industrial Applications)-1 Session Organizer: Youhei Takagi, Osaka University Email: [email protected]
Session Co-Organizer: Kwan-Soo Lee, Hanynag University Email: [email protected]
Session 1-2-9 Computational Heat and Mass Transfer (Thermal CFD)-2 Session Organizer: Atsushi Sakurai, Niigata University Email: [email protected]
Session Co-Organizer: Sung Jin Kim, Korea Advanced Institute of Science and Technology Email: [email protected]
Session 1-2-10 Computational Heat and Mass Transfer (Multiphase Flows & Interface Issues)-2 Session Organizer: Wensheng Lin, Shanghai Jiao Tong University Email: [email protected]
Session Co-Organizer: Bong Jae Lee, University of Pittsburgh Email: [email protected]
Session 1-2-11 Computational Heat and Mass Transfer (Heat Exchangers)-2 Session Organizer: Kazunori Kuwana, Yamagata University Email: [email protected]
Session 1-2-12 Computational Heat and Mass Transfer (Numerical Schemes & Algorithms)-2 Session Organizer: Yutaka Oda, Osaka University Email: [email protected]
12 Session Co-Organizer: T. S. Ravigururajan, Wichita State University Email: [email protected]
Session 1-2-13 Computational Heat and Mass Transfer (Heat Conduction & Diffusion)-2 Session Organizer: Baratunde Cola
Session Co-Organizer: Kazuya Tatsumi, Kyoto University Email: [email protected]
Session Co-Organizer: Laurent Pilon, University of California, Los Angeles Email: [email protected] Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021
Session 1-2-14 Computational Heat and Mass Transfer (Industrial Applications)-2 Session Organizer: Sandip Mazumder, Ohio State University Email: [email protected]
Session Co-Organizer: Tanmay Basak, Indian Institute of Technology Madras Email: [email protected]
Topic 1-3 Phase Change Phenomena and Heat Transfer
Session 1-3-1 Solid-Liquid Phase Change-1 Session Organizer: Shuichii Torii, Kumamoto University Email: [email protected]
Session Co-Organizer: Deyu Li, Vanderbilt University Email: [email protected]
Session 1-3-2 Bubble Dynamics in Boiling Phenomena-1 Session Organizer: David Christopher, Tsinghua University Email: [email protected]
Session Co-Organizer: Ichiro Ueno, Tokyo University of Science Email: [email protected]
Session 1-3-3 Solid-Liquid Phase Change-2 Session Organizer: Placidus B. Amama, UDRI/AFRL Email: [email protected]
Session Co-Organizer: Hiroyuki Kumano, Shinshu University Email: [email protected]
Session 1-3-4 Pool Boiling-2 Session Organizer: Lars Frormann, Fachhochschule Zwickau Email: [email protected]
Session Co-Organizer: Yasuo Koizumi, Shinshu University Email: [email protected]
Session 1-3-7 Two-Phase Flow and Heat Transfer-1 Session Organizer: Hideo Yoshida, Kyoto University Email: [email protected]
Session Co-Organizer: Frederick Best
13 Session 1-3-8 Bubble Dynamics in Boiling Phenomena-2 Session Organizer: Hiroyasu Ohtake
Session Co-Organizer: Deyu Li, Vanderbilt University Email: [email protected]
Session 1-3-9 Heat Pipe and Thermosyphon Session Organizer: Joel Plawsky, Rensselaer Polytechnic Institute Email: [email protected]
Session Co-Organizer: Yoshiyuki Abe, AIST Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Email: [email protected]
Session 1-3-10 Condensation and Miscellaneous Session Organizer: Niro Nagai, University of Fukui Email: [email protected]
Session Co-Organizer: Peter de Bock, GE Global Research Center Email: [email protected]
Session 1-3-11 Pool Boiling-1 Session Organizer: Masanori Monde, Saga University Email: [email protected]
Session Co-Organizer: Jungho Kim, University of Maryland Email: [email protected]
Session 1-3-12 Solid-Liquid Phase Change-3 Session Organizer: Placidus B. Amama, UDRI/AFRL Email: [email protected]
Session Co-Organizer: Tomoyuki Hatakeyama, Toyama Prefectural University Email: [email protected]
Session 1-3-13 Two-Phase Flow and Heat Transfer-2 Session Organizer: Tailian Chen, Gonzaga University Email: [email protected]
Session Co-Organizer: Satoru Momoki, Nagasaki University Email: [email protected]
Session 1-3-14 Evaporation of Liquid Film and Impinging Droplets-1 Session Organizer: Takaharu Tsuruta, Kyushu Institute of Technology Email: [email protected]
Session Co-Organizer: Jorge Alvarado, Texas A&M Email: [email protected]
Session 1-3-15 Evaporation of Liquid Film and Impinging Droplets-2 Session Organizer: Naoki Shikazono, The University of Tokyo Email: [email protected]
Session Co-Organizer: Joel Plawsky, Rensselaer Polytechnic Institute Email: [email protected]
14
Topic 1-4 Multi-Phase Heat and Mass Transfer
Session 1-4-1 Two-Phase Flow Phenomena in General-1 Session Organizer: John Crepeau, University of Idaho Email: [email protected]
Session Co-Organizer: Masahiro Kawaji, City College of New York Email: [email protected] Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Session 1-4-2 Heat Pipe, Evaporator, Condenser, Thermal Cycle-1 Session Organizer: Akio Tomiyama, Kobe University Email: [email protected]
Session Co-Organizer: Masahiro Kawaji, City College of New York Email: [email protected]
Session 1-4-3 Droplets and Sprays Session Organizer: Yoshimichi Hagiwara, Kyoto Institute of Technology Email: [email protected]
Session Co-Organizer: Panneer Selvam, University of Arkansas Email: [email protected]
Session 1-4-4 Boiling Heat Transfer Session Organizer: M. Erol Ulucakli, Lafayette College Email: [email protected]
Session Co-Organizer: Hisato Minagawa, The University of Shiga Prefecture Email: [email protected]
Session 1-4-5 Two-Phase Flow Phenomena in General-2 Session Organizer: Masahiro Kawaji, City College of New York Email: [email protected]
Session Co-Organizer: John Crepeau, University of Idaho Email: [email protected]
Session 1-4-6 Two-Phase Flow Phenomena in General-3 Session Organizer: Weilin Qu, University of Hawaii at Manoa Email: [email protected]
Session Co-Organizer: Yoshimichi Hagiwara, Kyoto Institute of Technology Email: [email protected]
Session 1-4-7 Heat Pipe, Evaporator, Condenser, Thermal Cycle-2 Session Organizer: Ali Siahpush, INL Email: [email protected]
Session Co-Organizer: Tomoaki Kunugi, Kyoto University Email: [email protected]
15
Topic 1-5 Radiative Heat Transfer
Session 1-5-1 Radiative Heat Transfer-1 Session Organizer: Michael Modest, UC Merced Email: [email protected]
Session Co-Organizer: Kazuyoshi Nakabe, Kyoto University Email: [email protected] Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Session 1-5-2 Radiative Heat Transfer-2 Session Organizer: Brent Webb, Brigham Young University Email: [email protected]
Session Co-Organizer: Kazuyoshi Nakabe, Kyoto University Email: [email protected]
Topic 1-6 Biological Heat and Mass Transfer
Session 1-6-1 Biotransport Analysis 1 Session Organizer: Ryo Shirakashi, The University of Tokyo Email: [email protected]
Session Co-Organizer: Kunal Mitra, Florida Tech Email: [email protected]
Session 1-6-2 Biotransport Analysis 2 and Medical Applications Session Organizer: Hiroshi Takamatsu, Kyushu University Email: [email protected]
Session Co-Organizer: Bumsoo Han, Purdue University Email: [email protected]
Session 1-6-3 Optical Measurement of Biomaterials Session Organizer: Ryo Shirakashi, The University of Tokyo Email: [email protected]
Session Co-Organizer: Kunal Mitra, Florida Tech Email: [email protected]
Topic 1-7 Heat and Mass Transfer in Micro-Scale Systems
Session 1-7-1 Heat and Mass Transfer in Micro-Scale Systems-1 Session Organizer: Debjyoti Banerjee, Texas A&M University Email: [email protected]
Session Co-Organizer: Yuji Suzuki, The University of Tokyo Email: [email protected]
Session 1-7-2 Heat and Mass Transfer in Micro-Scale Systems-2 Session Organizer: Vinod Narayanan, Oregon State University Email: [email protected]
16 Session Co-Organizer: Yasuo Kawaguchi, Tokyo University of Science Email: [email protected]
Session 1-7-3 Heat and Mass Transfer in Micro-Scale Systems-3 Session Organizer: Naoki Shikazono, The University of Tokyo Email: [email protected]
Session Co-Organizer: Deborah Pence, Oregon State University Email: [email protected]
Session 1-7-4 Heat and Mass Transfer in Micro-Scale Systems-4 Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Session Organizer: Nao Ninomiya, Utsunomiya University Email: [email protected]
Session Co-Organizer: Chang Oh, Idaho National Laboratory Email: [email protected]
Session 1-7-5 Heat and Mass Transfer in Micro-Scale Systems-5 Session Organizer: Hiroyasu Ohtake
Session Co-Organizer: Debjyoti Banerjee
Topic 1-8 Measurements and Diagnostics
Session 1-8-1 Measurement-I Session Organizer: Atsuki Komiya, Tohoku University Email: [email protected]
Session Co-Organizer: Yassin Hassan, Texas A&M University Email: [email protected]
Session 1-8-2 Instrumentation-I Session Organizer: Koichi Hishida, Keio University Email: [email protected]
Session Co-Organizer: Shripad T. Revankar, Purdue University Email: [email protected]
Session 1-8-3 Diagnostics Session Organizer: Kazuyoshi Nakabe, Kyoto University Email: [email protected]
Session Co-Organizer: Shripad T. Revankar, Purdue University Email: [email protected]
Session 1-8-4 Measurement-II Session Organizer: Jun Sakakibara, University Tsukuba Email: [email protected]
Session Co-Organizer: Yassin Hassan, Texas A&M University Email: [email protected]
17 Session 1-8-5 Instrumentation -II Session Organizer: Raj M. Manglik, University of Cincinnati Email: [email protected]
Session Co-Organizer: Atsuki Komiya, Tohoku University Email: [email protected]
Topic 1-9 Heat Transfer in Manufacturing Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Session 1-9-1 Heat Transfer in Manufacturing - Session 1 Session Organizer: Ben Li, University of Michigan Email: [email protected]
Session Co-Organizer: Takushi Saito, Tokyo Institute of Technology Email: [email protected]
Session 1-9-2 Heat Transfer in Manufacturing - Session 2 Session Organizer: T. S. Ravigururajan, Wichita State University Email: [email protected]
Session Co-Organizer: Kazuyoshi Fushinobu, Tokyo Institute of Technology Email: [email protected]
Session 1-9-3 Heat Transfer in Manufacturing - Session 3 Session Organizer: Ben Li, University of Michigan Email: [email protected]
Session Co-Organizer: Shigeki Hirasawa, Kobe University Email: [email protected]
TRACK 2 COMBUSTION AND ENERGY SYSTEMS
Topic 2-1 Heat and Mass Transfer in Turbulent Combustion
Session 2-1-1 Heat and Mass Transfer in Turbulent Combustion I Session Organizer: Tatsuya Hasegawa
Session Co-Organizer: Alex Brown, Sandia National Labs Email: [email protected]
Session 2-1-2 Heat and Mass Transfer in Turbulent Combustion II Session Organizer: Leiyong Jiang, NRCC Email: [email protected]
Session Co-Organizer: Hideaki Kobayashi, Tohoku University Email: [email protected]
Session 2-1-3 Heat and Mass Transfer in Turbulent Combustion III Session Organizer: Mamoru Tanahashi, Tokyo Institute of Technology Email: [email protected]
Session Co-Organizer: O. A. Ezekoye, University of Texas Email: [email protected]
18
Topic 2-2 Heat and Mass Transfer in Combustion Systems
Session 2-2-1 Heat and Mass Transfer in Combustion Systems I -Gasification Session Organizer: Kaoru Maruta, Tohoku University Email: [email protected]
Session Co-Organizer: Kris L. Jorgensen, The Babcock & Wilcox Company Email: [email protected] Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Session 2-2-2 Heat and Mass Transfer in Combustion Systems II -Flame Dynamics Session Organizer: Chenn Zhou, Purdue University Calumet Email: [email protected]
Session Co-Organizer: Yasuhiro Ogami, Institute of Fluid Science, Tohoku University Email: [email protected]
Session 2-2-3 Heat and Mass Transfer in Combustion Systems III -Novel Gaseous Combustion Session Organizer: Fumiteru Akamatsu, Osaka University Email: [email protected]
Session Co-Organizer: Chenn Zhou, Purdue University Calumet Email: [email protected]
Session 2-2-4 Heat and Mass Transfer in Combustion Systems IV -Coal and Biomass Combustion I- Session Organizer: Kris L. Jorgensen, The Babcock & Wilcox Company Email: [email protected]
Session Co-Organizer: Satoshi Kadowaki, Nagaoka University of Technology Email: [email protected]
Session 2-2-5 Heat and Mass Transfer in Combustion Systems V -Coal and Biomass Combustion II- Session Organizer: Chenn Zhou, Purdue University Calumet Email: [email protected]
Session Co-Organizer: Fumiteru Akamatsu, Osaka University Email: [email protected]
Session 2-2-6 Heat and Mass Transfer in Combustion Systems VI -Biomass and Waste Combustion- Session Organizer: Kaoru Maruta, Tohoku University Email: [email protected]
Session Co-Organizer: Kris L. Jorgensen, The Babcock & Wilcox Company Email: [email protected]
Session 2-2-7 Heat and Mass Transfer in Combustion Systems VII -Soot, Particles and Emissions- Session Organizer: Kris L. Jorgensen, The Babcock & Wilcox Company Email: [email protected]
Session Co-Organizer: Kazunori Kuwana, Yamagata University Email: [email protected]
19 Session 2-2-8 Heat and Mass Transfer in Combustion Systems VIII -Measurements and Dynamics in Combustion Systems- Session Organizer: Fumiteru Akamatsu, Osaka University Email: [email protected]
Session Co-Organizer: Chenn Zhou, Purdue University Calumet Email: [email protected]
Topic 2-3 Heat and Mass Transfer in IC Engines Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021
Session 2-3-1 Autoignition and Performance in Engines Session Organizer: Takemi Chikahisa, Hokkaido University Email: [email protected]
Session Co-Organizer: Chao Zhang, University of Western Ontario Email: [email protected]
Session 2-3-2 Engine Combustion Modeling for Control Session Organizer: Suresh Aggarwal, University of Illinois at Chicago Email: [email protected]
Session Co-Organizer: Akira Iijima, Nihon University Email: [email protected]
Topic 2-4 Heat and Mass Transfer in Energy Devices
Session 2-4-1 Heat and Mass Transfer in Energy Devices I -Fuel Cell 1- Session Organizer: Yutaka Tabe, Hokkaido University Email: [email protected]
Session Co-Organizer: Julie Asfia, Boeing Company Email: [email protected]
Session 2-4-2 Heat and Mass Transfer in Energy Devices II -Fuel Cell 2- Session Organizer: Wojciech Lipinski, University of Minnesota Email: [email protected]
Session Co-Organizer: Akira Nishimura, Mie University Email: [email protected]
Session 2-4-3 Heat and Mass Transfer in Energy Devices III -Energy Storage & Utilization- Session Organizer: Julie Asfia, Boeing Company Email: [email protected]
Session Co-Organizer: Kosuke Nishida, Kyoto Institute of Technology Email: [email protected]
Session 2-4-4 Heat and Mass Transfer in Energy Devices IV -Micro & Nano Scale Phenomena in Energy Devices- Session Organizer: Shohji Tsushima, Tokyo Institute of Technology Email: [email protected]
20 Session Co-Organizer: Wojciech Lipinski, University of Minnesota Email: [email protected]
Session 2-4-5 Heat and Mass Transfer in Energy Devices V -Solar Energy 1 (Photovoltaic Cells)- Session Organizer: Kohei Ito, Kyushu University Email: [email protected]
Session Co-Organizer: Julie Asfia, Boeing Company Email: [email protected]
Session 2-4-6 Heat and Mass Transfer in Energy Devices VI -Solar Energy 2 (Thermal Utilization & Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Reactor)- Session Organizer: Sandip Mazumder, Ohio State University Email: [email protected]
Session Co-Organizer: Katsunori Hanamura, Tokyo Institute of Technology Email: [email protected]
Session 2-4-7 Heat and Mass Transfer in Energy Devices VII -Heat Transfer & Thermal Devices- Session Organizer: Tetsuhiko Maeda, National Institute of Advanced Industrial Science and Technology (AIST) Email: [email protected]
Session Co-Organizer: Julie Asfia, Boeing Company Email: [email protected]
Session 2-4-8 Heat and Mass Transfer in Energy Devices VIII -Heat & Mass Transfer in Energy Systems- Session Organizer: Takuto Araki, Yokohama National University Email: [email protected]
Session Co-Organizer: Wojciech Lipinski, University of Minnesota Email: [email protected]
Session 2-4-9 Heat and Mass Transfer in Energy Devices IX -Thermal Cycles- Session Organizer: Naoki Shikazono, The University of Tokyo Email: [email protected]
Topic 2-5 Heat and Mass Transfer in Air Conditioning and Refrigeration
Session 2-5-1 Heat and Mass Transfer in Air Conditioning and Refrigeration-I Session Organizer: Shigeru Koyama
Session Co-Organizer: S.A. Sherif, University of Florida Email: [email protected]
Session 2-5-2 Heat and Mass Transfer in Air Conditioning and Refrigeration-II Session Organizer: S.A. Sherif, University of Florida Email: [email protected]
Session Co-Organizer: Shigeru Koyama
21
Topic 2-6 Heat and Mass Transfer in Reaction Systems
Session 2-6-1 Heat and Mass Transfer in Reaction Systems I Session Organizer: Yukihiko Matsumura, Hiroshima University Email: [email protected]
Session Co-Organizer: Kalyan Annamalai, Texas A&M University Email: [email protected] Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Session 2-6-2 Heat and Mass Transfer in Reaction Systems II Session Organizer: Kalyan Annamalai, Texas A&M University Email: [email protected]
Session Co-Organizer: Yukihiko Matsumura, Hiroshima University Email: [email protected]
Session Co-Organizer: Hirotatsu Watanabe, Tokyo Institute of Technology Email: [email protected]
TRACK 3 MICRO/NANO SCALE PHENOMENA AND THERMAL PROPERTIES
Topic 3-1 Transport Phenomena in Nano and Molecular Scale Systems
Session 3-1-1 Phonon Transport in Nano and Molecular Systems Session Organizer: Xinwei Wang, Iowa State University Email: [email protected]
Session Co-Organizer: Koji Miyazaki, Kyushu Institute of Technology Email: [email protected]
Session 3-1-2 Boundary Resistance and Conductance Session Organizer: Xiulin Ruan, Purdue University Email: [email protected]
Session Co-Organizer: Yasutaka Yamaguchi, Osaka University Email: [email protected]
Session 3-1-3 Boundary Resistance and Thermal Conductivity of Complex Molecular Systems Session Organizer: Yuji Nagasaka, Keio University Email: [email protected]
Session Co-Organizer: Xiulin Ruan, Purdue University Email: [email protected]
Session 3-1-4 Wetting and Drying Session Organizer: Gota Kikugawa, Tohoku University Email: [email protected]
Session Co-Organizer: Manohar Sohal, Idaho National Laboratory Email: [email protected]
22 Session 3-1-5 Measurement of Nanoscale Transport Phenomena Session Organizer: Patrick Hopkins, Sandia National Labs Email: [email protected]
Session Co-Organizer: Yuji Nagasaka, Keio University Email: [email protected]
Session 3-1-6 Design and Control of Thermal Transport Session Organizer: Vikas Tomar, Purdue University Email: [email protected] Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021
Session Co-Organizer: Yasutaka Yamaguchi, Osaka University Email: [email protected]
Session 3-1-7 Bubbles and Liquid-Vapor Interfaces Session Organizer: Manohar Sohal, Idaho National Laboratory Email: [email protected]
Session Co-Organizer: Yuji Nagasaka, Keio University Email: [email protected]
Topic 3-2 Transport Phenomena in Nano-Scale Energy Systems
Session 3-2-1 Transport Phenomena in Nanoscale Systems for Enhanced Energy Transfer Session Organizer: Arvind Narayanaswamy, Columbia University Email: [email protected]
Session Co-Organizer: Masahiko Shibahara, Osaka University Email: [email protected]
Session 3-2-2 Transport Phenomena in Nanostructures for Energy Systems Session Organizer: Arvind Narayanaswamy, Columbia University Email: [email protected]
Session Co-Organizer: Mitsuhiro Matsumoto, Kyoto University Email: [email protected]
Session 3-2-3 Transport Analysis for Nanoscale Energy Systems Session Organizer: Arvind Narayanaswamy, Columbia University Email: [email protected]
Session Co-Organizer: Kenji Yasuoka, Keio University Email: [email protected]
Session 3-2-4 Phase Transition and Fluid Structure in Nanoscale Energy Systems Session Organizer: Yoav Peles, R.P.I Email: [email protected]
Session Co-Organizer: Takashi Tokumasu, Institute of Fluid Science, Tohoku University Email: [email protected]
Session 3-2-5 Interfacial Transport Phenomena in Energy Systems Session Organizer: Kenji Yasuoka, Keio University Email: [email protected]
23 Session Co-Organizer: Patrick Hopkins, Sandia National Labs Email: [email protected]
Session 3-2-6 Nanofluids and Nanoparticles in Energy Systems Session Organizer: Avijit Bhunia, Teledyne Scientific Company Email: [email protected]
Session Co-Organizer: Masahiko Shibahara, Osaka University Email: [email protected]
Session 3-2-7 Nanoscale Transport Phenomena during Thermal Conduction-1 Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Session Organizer: Baratunde Cola, Georgia Institute of Technology Email: [email protected]
Session Co-Organizer: Shuhei Inoue, Hiroshima University Email: [email protected]
Session 3-2-8 Nanoscale Transport Phenomena during Thermal Conduction-2 Session Organizer: Baratunde Cola, Georgia Institute of Technology Email: [email protected]
Session Co-Organizer: Koji Takahashi, Kyushu University Email: [email protected]
Session 3-2-9 Transport Phenomena in Nanomaterial Synthesis-1 Session Organizer: Masahiko Shibahara, Osaka University Email: [email protected]
Session Co-Organizer: Alexis Abramson, Case Western Reserve University Email: [email protected]
Session 3-2-10 Transport Phenomena in Nanomaterial Synthesis-2 Session Organizer: Shuhei Inoue, Hiroshima University Email: [email protected]
Session Co-Organizer: Xinwei Wang, Iowa State University Email: [email protected]
Topic 3-3 Thermal Properties at the Micro/Nano-Scale
Session 3-3-1 Experimental Techniques for Micro- and Nanoscale Property Measurements-1 Session Organizer: Keunhan (Kay) Park, University of Rhode Island Email: [email protected]
Session Co-Organizer: Shuhei Inoue, Hiroshima University Email: [email protected]
Session 3-3-2 Experimental Techniques for Micro- and Nanoscale Property Measurements-2 Session Organizer: Bong Jae Lee, University of Pittsburgh Email: [email protected]
Session Co-Organizer: Koji Miyazaki, Kyushu Institute of Technology Email: [email protected]
24 Session 3-3-4 Interfacial Phenomena and Thermal Properties-1 Session Organizer: Ingrid Cotoros, Lockheed Martin, Advanced Technology Center Email: [email protected]
Session Co-Organizer: Gota Kikugawa, Tohoku University Email: [email protected]
Session 3-3-5 Interfacial Phenomena and Thermal Properties-2 Session Organizer: Alan McGaughey, Carnegie Mellon University Email: [email protected] Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021
Session Co-Organizer: Koji Takahashi, Kyushu University Email: [email protected]
Session 3-3-6 Thermal Properties and Performance of Nanofluids Session Organizer: Leslie Phinney, Sandia National Laboratories Email: [email protected]
Session Co-Organizer: Mitsuhiro Matsumoto, Kyoto University Email: [email protected]
Session 3-3-7 Thermal Properties of Nanoporous and Nanostructured Materials Session Organizer: Keunhan (Kay) Park, University of Rhode Island Email: [email protected]
Session Co-Organizer: Takashi Tokumasu, Institute of Fluid Science, Tohoku University Email: [email protected]
Session 3-3-8 Properties of Micro- and Nanomaterials-1 Session Organizer: Koji Miyazaki, Kyushu Institute of Technology Email: [email protected]
Session Co-Organizer: Bong Jae Lee, University of Pittsburgh Email: [email protected]
Session 3-3-9 Properties of Micro- and Nanomaterials-2 Session Organizer: Koji Takahashi, Kyushu University Email: [email protected]
Session Co-Organizer: Keunhan (Kay) Park, University of Rhode Island Email: [email protected]
Session 3-3-10 Nanofluids and Microchannels Session Organizer: Qingjun (Steve) Cai, Teledyne Scientific Email: [email protected]
Session Co-Organizer: Mitsuhiro Matsumoto, Kyoto University Email: [email protected]
Session 3-3-13 Phase Change Materials, Condensation, and Combustion Session Organizer: Hirofumi Daiguji, The University of Tokyo Email: [email protected]
Session Co-Organizer: Yoav Peles, R.P.I Email: [email protected]
25
TRACK 4 KEYNOTE ADDRESSES
Topic 4-1 Keynote
Session 4-1-1 Keynote 3: Two-Phase Micro-Channel Heat Sinks: Theory, Applications and Limitations Session Organizer: Jungho Kim, University of Maryland Email: [email protected]
Session 4-1-2 Keynote 4: Spacecraft Thermal Management Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Session Organizer: Roy Hogan, Sandia National Laboratories Email: [email protected]
Session 4-1-3 Keynote 1: Advanced Power Generation Systems and Related Thermal Engineering Session Organizer: Koichi Hishida, Keio University Email: [email protected]
Session 4-1-4 Keynote 2: Surrogate-Based Modeling and Dimension-Reduction Techniques for Thermo- Fluid & Energy Systems Session Organizer: Renwei Mei, University of Florida Email: [email protected]
Session 4-1-5 Keynote 5: Significance of Micro-Scale Mass Transport Phenomena on Fuel Cells and CO2 Sequestration Session Organizer: Isao Satoh, Tokyo Institute of Technology Email: [email protected]
Session 4-1-6 Keynote 6: Solar Thermal Fuel Production Session Organizer: Joerg Petrasch, University of Florida Email: [email protected]
Session 4-1-7 AIChE Donald Q. Kern Award Lecture Session Organizer: Masahiro Kawaji, City College of New York Email: [email protected]
Session 4-1-8 Keynote 7: Micro and Extended-Nano Fluidics on Microchip for Chemistry and Bio-Medical Applications Session Organizer: Kenji Yasuoka, Keio University Email: [email protected]
26 REVIEWERS
Bahman Abassi Brian Edge Kris L. Jorgensen Raj M. Manglik Amanie Abdelmessih Mohamed El-Genk Katsuhiko Kadoguchi Preeti Mani Mohamed Aggour Leo D. Eskin Satoshi Kadowaki Estelle Marchand Fumiteru Akamatsu Xuhui Feng Fumito Kaminaga Manuel Marcoux Jeffrey Allen Amy Fleischer Masayuki Kaneda Lionel Marraffa Ladan Amouzegar Manabu Fuchihata Toshihiro Kaneko Koji Matsubara Kalyan Annamalai Osamu Fujita Massoud Kaviany Alan McGaughey Sourabh Apte Koji Fukagata Tatsuya Kawaguchi Andrew McNamara Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Masataka Arai Jun Fukai Yasuo Kawaguchi Renwei Mei Takuto Araki Masahiro Furuya Nobuyuki Kawahara Emmett Miller Yutaka Asako Kazuyoshi Fushinobu Masahiro Kawaji Bob Minaie Hitoshi Asano Uday N. Gaitonde Hiroshi Kawanabe Yuichi Mitsutake Julie Asfia M. Gamba Zensaku Kawara Koji Miyazaki Ramazan Asmatulu Jian Gao Yohei Kayukawa Michael Modest Sylvie Aubry Walt Gill Dan Keene Satoru Momoki Valery Babin Aneesha Gogineni Jerry Keska Arden Moore Arindam Banerjee Gerardo Gordillo Jameel Khan Koji Morikawa Debjyoti Banerjee Mikhail Gotovsky Yoshiyuki Kidoguchi Masaaki Motozawa Thomas E. Beechem Samuel Graham K. Kiger Abhijit Mukherjee Kenneth Bell Hongsheng Guo Gota Kikugawa Shirish Mulay Tunde Bello-Ochende James Guo Eung Soo Kim Yuichi Murai Halil Berberoglu Yoshimichi Hagiwara Jungho Kim Daisuke Murakami Avijit Bhunia Bumsoo Han Myeongsub Kim Eiichi Murase Bradley Bon Yoshihiko Haramura Mark Kimber Yuzuru Nada Diana Borca-Tascuic Nozomu Hashimoto V. Kirbakaran Niro Nagai Theo Borca-Tascuic Tomoyuki Atsuhide Kitagawa Hosei Nagano Rosario Borrelli Hatakeyama Toshiaki Kitagawa Yuji Nagasaka Joan Boulanger Brandon Hathaway Yoshimitsu Kobashi Masaya Nakahara Ellen Brehob Hirofumi Hattori Hideaki Kobayashi Marioko Nakamura Alex Brown Jun Hayashi Masamichi Kohno Toshiya Nakamura Gretchen Burdick Asegun Henry Yasushi Koito Yuji Nakamura Qingjun (Steve) Cai Douglas Heymann Atsuki Komiya Noriaki Nakatsuka Carlo Canetta Carlos Hidrovo Ali Kosar Youngsuk Nam Ruander Cardenas Shigeki Hirasawa Aleksandr Kozlov Vinod Narayanan Richard Carranza Masafumi Hirota Satish Kumar Arvind Gian Piero Celata Koichi Hishida Tomoaki Kunugi Narayanaswamy Angelo Cervone Chungpyo Hong Chih-jung Kuo Archana Nema Chung-Lung Chen Patrick Hopkins Masatoshi Kureta Nam-Trung Nguyen Jun Chen Tomoya Houra Ryoichi Kurose Tomohide Niimi Tailian Chen John Howell Kazunori Kuwana Susumu Noda Changrui Cheng Baoling Huang Eric Landry Mark North Shohei Chiashi Mitsuhisa Ichiyanagi Ben Lawrence Yutaka Oda Takemi Chikahisa Tamio Ida Bong Jae Lee Yasuhiro Ogami Yaroslav Chudnovsky Norimasa Iida Sang-Joon Lee Hideyuki Ogawa Baratunde Cola Takaaki Inada Jean-Claude Legros Chang Oh Kevin Cope Shuhei Inoue Calvin Li Hyukjin Oh Ingrid Cotoros Yohei Inoue Deyu Li Steven O'Halloran John Crepeau Sergei Isaev Wojciech Lipinski Taku Ohara Alex da Silva Jun Ishimoto Felix Lisin Hidetoshi Ohkubo Chris Dames Masaru Ishizuka Dong Liu Hiroyasu Ohtake Kyle Daun Akemi Ito Yung-Tien Liu Tomio Okawa Peter de Bock Hiroyuki Ito Joakim Lundgren Ken Okazaki Bhushan Desam Kaoru Iwamoto Tengfei Luo Tuba Okutucu Maneesh Dubey Prashant Jain Toshinori Makuta Kunito Okuyama Marc Dunham Jerry Jones Jonathan A. Malen Hajime Onishi
27 Patrick Oosthuizen Makoto Sakurai Ying Sun Yoshio Utaka Juan Ordonez Karthik Sasihithlu Koichi Suzuki Ajit Vallabhaneni Gopalendu Pal Yohei Sato Yuji Suzuki Jose Vargas Keunhan (Kay) Park Isao Satoh Larry Swanson Bin Wang Rohitha Paruchuri Kimitoshi Satoh Janusz Szymczyk Xiaojia Wang Michael Pate Keisuke Sawada Shigeru Tada Hiroaki Watanabe Vishal Patil Tatsuo Sawada Masato Tagawa Hirotatsu Watanabe Arvind Pattamatta Toru Sawai Yoshihiro Taguchi Peter Wayner, Jr. Yoav Peles Robert Sayer Youhei Takagi Brent Webb Eric Petersen Sergei Sazhin Kazuaki Takahashi Peng S. Wei
Joerg Petrasch Laura Schaefer Koji Takahashi Valeriy White Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Leslie Phinney Patrick Schelling Hiroshi Takamatsu Steven Wilcox Laurent Pilon Daniel Schmeling Yasuyuki Takata Benxin Wu Kevin Pipe Mark Scott Mamoru Tanahashi Jamal Yagoobi Joel Plawsky Jiro Senda Miki Taniguchi Jun Yamada Eric Pop Justin R. Serrano Constantine Masahiko Yamada Bo Qiu Mitra Sexton Tarawneh Jun-ichiro Yamamoto Weilin Qu Sheng Shen Yuji Tasaka Bao Yang Josh Quinell S.A. Sherif Siddharth Thakur Shengyuan Yang Rishi Raj Masahiko Shibahara Victoria Timchenko Kenji Yasuoka Devesh Ranjan Naoki Shikazono Christophe T'Joen Kazuhisa Yuki T. S. Ravigururajan Hirofumi Shintaku Vikas Tomar Sean Yun Sean Reilly Ryo Shirakashi Toshio Tomimura Theodore Zannis Shripad T. Revankar Ali Siahpush Eiji Tomita Yuwen Zhang Michael Riley G. E. Sims Toshiyuki Tomoda Zhuomin Zhang Sylvain Rodat Joshua Smith Kazuya Tsuboi Jun-Ming Zhao Xiulin Ruan Eckehard Specht Toshihiro Tsuji Leonid Zhigilei Piyush Sabharwall Judi Steciak Takahiro Tsukahara Chao Zhu Mohamed Sabry Matthew Stinson Takaharu Tsuruta Gennady Ziskind Takushi Saito T. Darton Strayer Shohji Tsushima Tatiana Zolotoukhina Amir Sajjadi Mikhail Strongin Kemal Tuzla Volodymyr Zrodnikov Jun Sakakibara K. Suga Ichiro Ueno Hiroto Sakashita Donguk Suh M. Erol Ulucakli Atsushi Sakurai Lin Sun Hisashi Umekawa
28 The 8th ASME-JSME
Thermal Engineering Joint Conference Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 ( AJTEC2011 )
Conference Program
March 13 - 17, 2011 Waikiki Beach Marriott Resort & Spa, Honolulu, Hawaii
Co-sponsored by The Thermal Engineering Division, Japan Society of Mechanical Engineers and The Heat transfer Division, American Society of Mechanical Engineers
In cooperation with The Energy Transport Process Division, American Institute of Chemical Engineers Announcement from the Chairpersons
The American Society of Mechanical Engineers (ASME) and the Japan Society of Mechanical Engineers (JSME) have co-developed a successful series of joint conferences on thermal engineering at four-year intervals. AJTEC 2011 is the 8th ASME/JSME Thermal Engineering Joint Conference. The previous conferences in this series were held in: Honolulu, Hawaii (1983 and 1987); Reno, Nevada (1991); Maui, Hawaii (1995); San Diego, California (1999); Hawaii Island, Hawaii (2003); and Vancouver, Canada (2007). AJTEC 2011 will be held again in Honolulu Hawaii. Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 The Key Themes of AJTEC 2011 are "Fundamental" and "Interdisciplinary" with a vision for the future of Thermal Engineering.
The 20th century is, in many ways symbolized by the phrases "Division" and "Development". In the early part of the century, engineers divided systems into their most fundamental elements for purpose of study. As the century progressed, scientific understanding enabled the enormous development of many new technologies.
In the dawn of the new century, thermal engineers will be required to attain a better understanding of fundamental phenomena governing complex and integrated mechanical, chemical, and energy systems. As such, we must increase our efforts to integrate thermal engineering with other disciplines, and broaden our perspective to include an ever-widening range of time scales (from ultra rapid to long term) and length scales (from nanoscale to global). Such efforts require a strong collective will from the thermal engineering community to engage new technological challenges and to collaborate with scientists and engineers from other disciplines to meet these challenges with unique and innovative solutions. The 21st century has opened the gate for this new direction and the thermal engineering community appears ready and willing to embrace the challenges that lie ahead.
The objective of the AJTEC 2011 conference is to provide an international forum for the exchange of such new ideas and direction as described above and the presentation of the latest work in the field. We strongly encourage attendance and paper submission from sister societies around the globe including those from ASME and JSME.
Koichi Hishida, Keio University, Conference Co-Chair (JSME)
James Klausner, University of Florida, Conference Co-Chair (ASME)
1 Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021
2 Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021
3 Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021
4 Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021
5 Floor Plan of the Meeting Area - Paoakalani Tower
Third Floor Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021
Second Floor
6 General Information
Presentation and Audio-Visual Aids All the presentations except the Keynote Lectures are allotted for 20 minutes including discussion. Each session room will have a fullcolor liquid crystal projector (LCP). The LCP will be equipped with a connection cable with D-Sub mini 15-pin male connector for RGB-video input from computers. Note that speakers who wish to use the LCP must prepare their own computer, presentation software, and additional connectors if needed.
Welcome Reception Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 On Sunday evening, March 13, 2011, all attendees are invited to the Welcome Reception. The Welcome Reception will be held at 5:00 pm to 7:00 pm at the Pualeilani Terrace, which is located on the third floor of the Kealohilani Tower and is connected to the second floor of the Paoakalani Tower.
Conference Banquet The conference banquet will be at 7:00 pm to 9:00 pm on Wednesday, March 16, 2011. Dinner will be served as a buffet, with seating provided. The conference banquet will be held at the Kona Moku ballroom. The regular registration fee includes admission to the banquet.
Conference Breakfast and Lunch Everyday of the technical sessions, Monday, March 14 through Thursday, March 17, a buffet style conference breakfast and lunch will be served. All the attendees are invited to the conference breakfast and lunch.
Keynote Lectures
Keynote Lectures will be presented in the Kona Moku ballroom every morning from 9:00 am to 10:20 am. Keynote Lecturers are as follows:
Keynote 1, 9:00 am - 9:40 am, Monday, March 14 Advanced Power Generation Systems and Related Thermal Engineering Problems, Mamoru Ozawa, Ryosuke Matsumoto, Hisashi Umekawa (Kansai University, Suita, Osaka, Japan)
Keynote 2, 9:40 am - 10:20 am, Monday, March 14 Surrogate-Based Modeling and Dimension-Reduction Techniques for Thermo-Fluid & Energy Systems, Young-Chang Cho, Wenbo Du, Amit Gupta, Chien-Chou Tseng, Ann Marie Sastry, Wei Shyy (University of Michigan, Ann Arbor, MI, United States)
Keynote 3, 9:00 am - 9:40 am, Tuesday, March 15 Two-Phase Micro-Channel Heat Sinks: Theory, Applications and Limitations, Issam Mudawar (Purdue University, West Lafayette, IN, United States)
Keynote 4, 9:40 am - 10:20 am, Tuesday, March 15 Spacecraft Thermal Management, Bruce Drolen (The Boeing Company, Los Angeles, United States)
Keynote 5, 9:00 am - 9:40 am, Wednesday, March 16 Significance of Micro-Scall Mass Transport Phenomena on Fuel Cells and CO2 Sequestration, Shuichiro Hirai, Shohji Tsushima, Suguru Uemura (Tokyo Institute of Technology, Tokyo, Japan)
Keynote 6, 9:40 am - 10:20 am, Wednesday, March 16 Solar Thermal Fuel Production, Christian Sattler (German Aerospace Center, Cologne, Koln, Germany), Hans Muller-Steinhagen (Technical University of Dresden, Dresden, Germany), Martin Roeb, Dennis Thomey, Martina Neises (German Aerospace Center, Cologne, Koln, Germany) 7
Keynote 7, 9:00 am - 9:40 am, Thursday, March 17 Micro and Extended-Nano Fluidics on Microchip for Chemistry and Bio-Medical Applications, Takehiko Kitamori (The University of Tokyo, Tokyo, Japan)
Donald Q. Kern Award Lecture
In honor of Donald Q. Kern, pioneer in process heat transfer, the AIChE Transport Energy Process Division recognizes an individual's expertise in a given field of heat transfer or energy conversion. Selection criteria Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 include: 1. Significant contributions to applied heat transfer or conversion or in the translation of research results into useful technological applications. 2. The recipient will prepare a written review article to be published in the AIChE Journal. The 2010 Donald Q. Kern award recipient is Mohamed El-Genk, Regents' Professor, Chemical, Nuclear, and Mechanical Engineering, University of New Mexico.
Lecture from Prof. Mohamed El-Genk will be held on 9:40 - 10:20 am, Thursday, March 17 at the Kona Moku ballroom. Title of the lecture is: Nucleate Boiling Enhancements on Porous Graphite and Micro-Porous and Macro-Finned Copper Surfaces
8 Organizing Committee
Chair Persons: Koichi Hishida, Keio University James Klausner, University of Florida
Secretary-General: Isao Satoh, Tokyo Institute of Technology
Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Committee Members: Amanie Abdelmessih, Saint Martin's University Chang Oh, Idaho National Laboratory Alexis Abramson, Case Western Reserve University Taku Ohara, Tohoku University Fumiteru Akamatsu, Osaka University Keunhan (Kay) Park, University of Rhode Island Kalyan Annamalai, Texas A&M University Yoav Peles, Rensselaer Polytechnic Institute Julie Asfia, Boeing Company Leslie Phinney, Sandia National Laboratories Debjyoti Banerjee, Texas A&M University Joel Plawsky, Rensselaer Polytechnic Institute Alex Brown, Sandia National Laboratories T.S. Ravigururajan, Wichita State University Qingjun (Steve) Cai, Teledyne Scientific Shripad T. Revankar, Purdue University Takemi Chikahisa, Hokkaido University Xiulin Ruan, Purdue University Yaroslav Chudnovsky, Gas Technology Institute Takushi Saito, Tokyo Institute of Technology Baratunde Cola, Georgia Institute of Technology Jun Sakakibara, University of Tsukuba Ingrid Cotoros, Lockheed Martin Atsushi Sakurai, Niigata University John Crepeau, University of Idaho Laura Schaefer, University of Pittsburgh Hirofumi Daiguji, The University of Tokyo Mitra Sexton, Knolls Atomic Power Laboratory Mohamed El-Genk, University of New Mexico S.A. Sherif, University of Florida Ofodike A. Ezekoye, University of Texas Jessica Shi, Electric Power Research Institute Yoshimichi Hagiwara, Kyoto Institute of Technology Masahiko Shibahara, Osaka University Tatsuya Hasegawa, Nagoya University Naoki Shikazono, The University of Tokyo Leiyong Jiang, National Research Council Canada Ryo Shirakashi, The University of Tokyo Amir Jokar, ThermoFluids Tech Ali Siahpush, Idaho National Laboratory Kris L Jorgensen, The Babcock & Wilcox Co. Alex da Silva, University of Texas at Austin Yasuo Kawaguchi, Tokyo University of Science Manohar Sohal, Idaho National Laboratory Masahiro Kawaji, City College of New York Kazuhiro Suga, Osaka Prefecture University Hideaki Kobayashi, Tohoku University Yuji Suzuki, The University of Tokyo Atsuki Komiya, Tohoku University Shigeru Tada, National Defense Academy Shigeru Koyama, Kyushu University Masato Tagawa, Nagoya Institute of Technology Tomoaki Kunugi, Kyoto University Yasuyuki Takata, Kyushu University Ben Q. Li, University of Michigan Mamoru Tanahashi, Tokyo Institute of Technology Wei Li, Zhejiang University Eiji Tomita, Okayama University Wojciech Lipinski, University of Minnesota Shohji Tsushima, Tokyo Institute of Technology Raj M. Manglik, University of Cincinnati Erol Ulucakli, Lafayette College Kaoru Maruta, Tohoku University Xinwei Wang, Iowa State University Shigeo Maruyama, The University of Tokyo Brent Webb, Brigham Young University Yukihiko Matsumura, Hiroshima University Jun Yamada, Shibaura Institute of Technology Alan McGaughey, Carnegie Mellon University Kenji Yasuoka, Keio University Kunal Mitra, Florida Institute of Technology Theodore Zannis, Hellenic Naval Academy Koji Miyazaki, Kyushu Institute of Technology Zhuomin Zhang, Georgia Institute of Technology Michael Modest, UC Merced Chenn Zhou, Purdue University Calumet Arun Muley, Koch Heat Transfer Yuji Nagasaka, Keio University Kazuyoshi Nakabe, Kyoto University Vinod Narayanan, Oregon State University Arvind Narayanaswamy, Columbia University 9 Technical Sessions
Monday, March 14
Opening Remarks
Room: Kona Moku Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 8:50-9:00, Monday, March 14 Session Organizer: Isao Satoh (Tokyo Institute of Technology, Tokyo, Japan)
Track 4: Keynote Lectures Track Chair: Kenji Yasuoka (Keio University, Yokohama, Kanagawa, Japan) Track Co-Chair: James Klausner (Univesity of Florida, Gainesville, FL, United States)
Room: Kona Moku 9:00-9:40, Monday, March 14 4-1-3 Keynote - 1 Session Organizer: Koichi Hishida (Keio University, Yokohama, Japan) AJTEC2011- 44427 Advanced Power Generation Systems and Related Thermal Engineering Problems, Mamoru Ozawa, Ryosuke Matsumoto, Hisashi Umekawa (Kansai University, Suita, Osaka, Japan)
Room: Kona Moku 9:40-10:20, Monday, March 14 4-1-4 Keynote - 2 Session Organizer: Renwei Mei (University of Florida, Gainesville, FL, United States) AJTEC2011-44034 Surrogate-Based Modeling and Dimension-Reduction Techniques for Thermo-Fluid & Energy Systems, Young-Chang Cho, Wenbo Du, Amit Gupta, Chien-Chou Tseng, Ann Marie Sastry, Wei Shyy (University of Michigan, Ann Arbor, MI, United States)
Track 1: Fundamentals of Heat and Mass Transfer Track Chair: Kazuyoshi Nakabe (Kyoto University, Kyoto, Kyoto, Japan) Track Co-Chair: Raj M. Manglik (University of Cincinnati, Cincinnati, OH, United States) Track Co-Chair: Chang Oh (Idaho National Laboratory, Idaho Falls, ID, United States)
Room: Honolulu 10:40-12:00, Monday, March 14 1-5-1 Radiative Heat Transfer - 1 Session Organizer: Michael Modest (UC Merced, Merced, CA, United States) AJTEC2011-44011 A Simple Physical Approach to Model Spectral Radiative Properties of Semi-Transparent Dispersed Materials, Leonid Dombrovsky (Joint Institute for High Temperatures, Moscow, Russia), Dominique Baillis (Université de Lyon, CNRS, INSA-Lyon, CETHIL, UMR5008, Lyon, France) AJTEC2011-44332 Measurements of Spectral Transmittance of Porous Cerium Dioxide Media in the Range 900-1,700 nm, Krithiga Ganesan, Wojciech Lipinski (University of Minnesota, Minneapolis, MN, United States) AJTEC2011-44166 10 Radiative Property Measurements of Oxy-Fuel Flames, Clinton R. Bedick, Stephen K. Beer, Kent H. Casleton, Benjamin T. Chorpening (US Department of Energy National Energy Technology Laboratory, Morgantown, WV, United States), David W. Shaw (Department of Engineering, Beaver Falls, PA, United States), M. Joseph Yip (US Department of Energy National Energy Technology Laboratory, Morgantown, WV, United States) AJTEC2011-44622 Control of Radiative Properties of Coatings Pigmented with Fe2O3 Nanoparticles, Hiroki Gonome, Mehdi Baneshi, Atsuki Komiya, Shigenao Maruyama (Tohoku University, Sendai, Miyagi, Japan)
Room: Honolulu Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 13:40-15:00, Monday, March 14 1-5-2 Radiative Heat Transfer - 2 Session Organizer: Brent Webb (Brigham Young University, Provo, UT, United States) AJTEC2011-44131 Hybrid SN-PN Solution of the Radiative Transfer Equation in Multi-Dimensional Media, Maathangi Sankar, Sandip Mazumder (Ohio State University, Columbus, OH, United States) AJTEC2011-44487 Importance Sampling in Monte Carlo Ray Tracing Solutions Applied to Radiation in Hypersonic Entry Flows, Andrew Feldick (Pennsylvania State University, University Park, PA, United States), Michael Modest (University of California, Merced, Merced, CA, United States) AJTEC2011-44515 Thermal Radiation From a Photonic Crystal of Silica-Particles, Nozomi Ikemachi, Ryota Nakano, Shohei Kurogi, Koji Miyazaki (Kyushu Institute of Technology, Kitakyushu, Fukuoka, Japan) AJTEC2011-44523 Effect of Skin Structure Change with Age on Optical Characteristics of Human Skin, Jun Yamada, Tatsuya Ogawa, Hirokazu Kawai (Shibaura Institute of Technology, Tokyo, Japan), Hironobu Yoshikawa, Sadaki Takata (Shiseido Co., LTD, Tokyo, Japan)
Room: Kou 10:40-12:00, Monday, March 14 1-8-1 Measurement - I Session Organizer: Atsuki Komiya (Tohoku University, Sendai, Miyagi, Japan) AJTEC2011-44271 Measurement Technique of In-Plane Thermal Resistance of PCB, Tomoyuki Hatakeyama, Masaru Ishizuka, Shinji Nakagawa, Yuta Nakano (Toyama Prefectural University, Toyama, Japan), Masataka Hirokawa (Oki Printed Circuit, Niigata, Japan), Toshio Tomimura (Kumamoto University, Kumamoto, Japan) AJTEC2011-44185 Uncertainties on HTC Measurement of Water Spray Quenching of Aluminum Alloys, Saeed Bikass, Bjørn Andersson, Artem Pilipenk (Sintef and University of Oslo, Oslo, Norway) AJTEC2011-44206 Dew and Frost Points Measurements and Estimation for Residual Gases in High-Pressure Hydrogen, Kenji Ishida, Masataka Kosaka, Masanori Monde (Saga University, Saga, Japan) AJTEC2011-44403 Visualization of Dispersed Phase Flow in Centrifugal Extractor Using Taylor-Couette Vortex Flow, Hideharu Takahashi, Hiroshige Kikura, Kenji Takeshita, Masanori Aritomi (Tokyo Institute of Technology, Tokyo, Japan)
Room: Kou 13:40-15:00, Monday, March 14 1-8-4 Measurement - II Session Organizer: Jun Sakakibara (University of Tsukuba, Tsukuba, Japan) AJTEC2011-44370 11 Measurement of Current-Density in PEFC with NMR Sensors, Kuniyasu Ogawa, Yasuo Yokouchi (Keio University, Yokohama, Japan), Tomoyuki Haishi (MRTechnology, Tsukuba, Japan), Kohei Ito (Kyushu University, Fukuoka, Japan) AJTEC2011-44415 Thermal Conductivity Measurement of Hydrogen at High Pressure and High Temperature, Koichi Kimura, Shogo Moroe (Kyushu University, Fukuoka, Japan), Peter Lloyd Woodfield (Griffith University, Southport, Qld, Australia), Jun Fukai (Kyushu University, Fukuoka, Japan), Kan’ei Shinzato (National Institute of Advanced Industrial Science and Technology, Nishi-ku, Fukuoka, Japan), Masamichi Kohno (Kyushu University, Fukuoka, Japan), Motoo Fujii (National Institute of Advanced Industrial Science and
Technology, Fukuoka, Nishi-ku, Japan), Yasuyuki Takata (Kyushu University, Fukuoka, Japan) Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 AJTEC2011-44582 Flow Pattern Dynamics Around a Vertical Dividing Junction, M. B. Alamu, B.J. Azzopardi (University of Nottingham, Nottingham, United Kingdom) AJTEC2011-44499 Unsteady Flow Structure Behind a Heated Cylinder Measured by Time-Resolved PIV with Thermo-Couple Sensing, Yuji Ohta, Takuya Mukoyama, Koichi Hishida (Keio University, Yokohama, Japan)
Room: Kou 15:20-16:40, Monday, March 14 1-8-2 Instrumentation - I Session Organizer: Koichi Hishida (Keio University, Yokohama, Japan) Session Co-Organizer: Shripad T. Revankar (Purdue University, West Lafayette, IN, United States) AJTEC2011-44120 Heat Source Localization Sensitivity Analyses for an Ultrasonic Sensor Array, Michael R. Myers (Vanderbilt University, Nashville, TN, United States), Ariosto B. Jorge (Federal University of Itajuba, Itajuba, MG, Brazil), D. G. Walker (Vanderbilt University, Nashville, TN, United States), Mark J. Mutton (Industrial Measurement Systems, Inc., Aurora, IL, United States) AJTEC2011-44243 Ultrasound Characteristics in High-Temperature Fluid, Tomonori Ihara, Hiroshige Kikura, Yasushi Takeda (Tokyo Institute of Technology, Tokyo, Japan), Eiji Ochi, Akira Inagaki (Japan Nuclear Fuel Limited, Aomori, Japan) AJTEC2011-44437 Response Compensation Scheme for Constant-Current Hot-Wire Anemometry Based on Frequency Response Analysis, Kazuhide Kaifuku, Soe Minn Khine, Tomoya Houra, Masato Tagawa (Nagoya Institute of Technology, Nagoya, Japan) AJTEC2011-44442 Acceleration of Recursive Cross-Correlation PIV using Multiple GPUs, Shuhei Tarashima, Satoshi Someya, Koji Okamoto (The University of Tokyo, Kashiwa, Chiba, Japan)
Room: Waikiki 1 10:40-12:00, Monday, March 14 1-3-2 Bubble Dynamics in Boiling Phenomena - 1 Session Organizer: David Christopher (Tsinghua University, Beijing, China) Session Co-Organizer: Ichiro Ueno (Tokyo University of Science, Noda, Chiba, Japan) AJTEC2011-44051 Lower Limit of Homogeneous Nucleation Boiling Explosion in Water During Linear Boundary Heating and Contact with High Temperature Surface, Mohamamd Nasim Hasan, Masanori Monde, Yuichi Mitsutake (Saga University, Saga, Japan) AJTEC2011-44429 A New Empirical Model for Bubble Growth: Boiling in an Infinite Medium and on a Wall at High Superheat, Herman D. Haustein (RWTH, Aachen, Germany), Georg F. Dietze, Reinhold Kneer (RWTH Aachen University, Aachen, Germany) 12 AJTEC2011-44087 Extension of the Full Cavitation Model for Cryogenic Fluids, H. Q. Yang (CFD Research Corp., Huntsville, AL, United States)
Room: Waikiki 1 13:40-15:00, Monday, March 14 1-3-8 Bubble Dynamics in Boiling Phenomena - 2 Session Organizer: Hiroyasu Ohtake (Kogakuin University, Tokyo, Japan) Session Co-Organizer: Deyu Li (Vanderbilt University, Nashville, TN, United States)
AJTEC2011-44153 Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Flushing of Non-Condensable Gases by Saturated Steam, Rajesh Patel, Raivat Patel, Chao Zhu (New Jersey Institute of Technology, Newark, NJ, United States), Chao-Hsin Lin (Boeing Commercial Airplanes, Seattle, WA, United States) AJTEC2011-44324 Molecular Dynamics Simulations of Homogeneous and Heterogeneous Thermal Bubble Nucleation using NPT Systems, Min Chen, Yunfei Chen (Southeast University, Nanjing, Jiangsu, China), Juekuan Yang, Yandong Gao, Deyu Li (Vanderbilt Unviersity, Nashville, TN, United States) AJTEC2011-44336 Nucleate Boiling Bubble Dynamics in a PDMS Microchannel with a Single Nucleation Site, Haojie Wang, China, Xipeng Lin, David Christopher (Tsinghua University, Beijing, China) AJTEC2011-44595 Condensation/Collapse of Vapor Bubble Injected to Subcooled Pool, Ichiro Ueno, Ryota Hosoya, Chungpyo Hong (Tokyo Univeristy of Science, Chiba, Japan)
Room: Waikiki 1 15:20-16:40, Monday, March 14 1-3-9 Heat Pipe and Thermosyphon Session Organizer: Joel Plawsky (Rensselaer Polytechnic Institute, Troy, NY, United States) Session Co-Organizer: Yoshiyuki Abe (AIST, Tsukuba, Ibaraki, Japan) AJTEC2011-44360 Utilization of Advanced Working Fluids in Heat Pipes, Sean Reilly, Ivan Catton (University of California, Los Angeles, Los Angeles, CA, United States) AJTEC2011-44244 A Design for Loop Thermosyphon Including Effect of Non-Condensable Gas, Hiroyuku Toyoda, Tadakatsu Nakajima, Yoshihiro Kondo (Mechanical Engineering Research Labo, Hitachi, Ltd., Hitachinaka, Ibaraki, Japan), Akio Idei, Shigemasa Sato (Enterprise Server Division, Hitachi, Ltd., Hadano, Kanagawa, Japan) AJTEC2011-44312 Investigating the Performance of Bi-Porous Disk-Shaped Wick with the Restricted Vapor Space Via Developing an Electric Analogue Method, ladan Amouzegar, Sean Reilly, Ivan Catton (University of California, Los Angeles, Los Angeles, CA, United States) AJTEC2011-44646 Development and Experimental Validation of a Micro-Nano Thermal Ground Plane, Peter de Bock, Shakti Chauhan, Pramod Chamarthy, Chris Eastman, Boris Russ, Stanton Weaver, Bryan Whalen, Tao Deng (GE Global Research Center, Niskayuna, NY, United States), Frank Gerner (University of Cincinnati, Cincinnati, OH, United States), Douglas Johnson, David Courson (Air Force Research Laboratory, Dayton, OH, United States), Quinn Leland, Kirk L. Yerkes (Air Force Research Laboratory, Wright Patterson AFB, OH, United States)
Room: Waikiki 2 10:40-12:00, Monday, March 14 1-2-3 Computational Heat and Mass Transfer (Mixed & Natural Convection) Session Organizer: K. Suga (Osaka Prefecture University, Sakai, Osaka, Japan) 13 AJTEC2011-44419 Linear Stability Analysis for the Onset of Convection During Microwave Heating of Samples Confined within Horizontal Plates, Tanmay Basak, Madhuchhanda Bhattacharya (Indian Institute of Technology Madras, Chennai, Tamilnadu, India) AJTEC2011-44420 Numerical Visualization of Heat Flow and Thermal Mixing in Various Differentially Heated Square Cavities Using Bejan's Heatlines, Tanmay Basak, Ram Satish Kaluri (Indian Institute of Technology Madras, Chennai, Tamilnadu, India) AJTEC2011-44204
Marangoni Convection in Water Isopropanol Mixtures in the Presence of Soret Effect, Ziad Saghir, Md Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Abdur Rahman (Ryerson University, Toronto, ON, Canada) AJTEC2011-44531 Heat Flow Visualization for Natural Convection in Rhombic Enclosures: Bejan's Heatline Approach, Anandalakshmi R, Tanmay Basak (Indian Institute of Technology Madras, Chennai, Tamilnadu, India)
Room: Waikiki 2 13:40-15:00, Monday, March 14 1-2-8 Computational Heat and Mass Transfer (Industrial Applications) - 1 Session Organizer: Youhei Takagi (Osaka University, Toyonaka, Osaka, Japan) AJTEC2011-44619 Parametric Fin Array Optimization for Radial Flux Machines Considering Time Varying Loads, Andrew Semidey, J Rhett Mayor (Georgia Tech, Atlanta, GA, United States) AJTEC2011-44638 A 3D Numerical Simulation of a Cylindrical Towel Heater with Symmetric and Asymmetric Heating, Daniel Murray, Jose L. Lage (Southern Methodist University, Dallas, TX, United States) AJTEC2011-44081 The Model of Temperature Field and Chemical Heterogeneity of Solidifying Ductile-Cast-Iron Roller, Jana Dobrovska (VSB-Technical University Ostrava, Faculty of Metallurgy and Materials Engineering, Ostrava, Czech Republic), Frantisek Kavicka, Karel Stransky, Bohumil Sekanina (Brno University of Technology, Brno, Moravia, Czech Republic) AJTEC2011-44021 Space-Time-Structure Map for as Cast Massive Rolls, Waldemar Wolczynski (Institute of Metallurgy and Materials Science, KRAKÓW, Poland), Bogusz Kania (AGH University of Science and Technology, KRAKÓW, Poland), Wojciech Wajda (Institute of Metallurgy and Materials Science, KRAKÓW, Poland), Miroslaw Kostrzewa (ECO-HARPOON - Ecological Technologies Coy Ltd, WARSZAWA, Poland)
Room: Waikiki 2 15:20-16:40, Monday, March 14 1-2-14 Computational Heat and Mass Transfer (Industrial Applications) - 2 Session Organizer: Sandip Mazumder (Ohio State University, Columbus, OH, United States) Session Co-Organizer: Tanmay Basak (Indian Institute of Technology Madras, Chennai, Tamilnadu, India) AJTEC2011-44013 Common Currency for System Integration of High Intensity Energy Subsystems, David Pratt, David Moorhouse (USAF, WPAFB, OH, United States) AJTEC2011-44058 Numerical Optimization of the Casting of Ceramic Material Eucor, Frantisek Kavicka (Brno University of Technology, Brno, Moravia, Czech Republic), Jana Dobrovska (VSB-Technical University Ostrava, Faculty of Metallurgy and Materials Engineering, Ostrava, Czech Republic), Karel Stransky, Bohumil Sekanina, Josef Stetina (Brno University of Technology, Brno, Czech Republic) AJTEC2011-44270 Numerical Investigation of the Thermal Behavior in a Hydrogen Tank During Fast Filling Process, Youhei Takagi (Osaka University, Toyonaka, Osaka, Japan), Naoya Sugie, Kazuhiro Takeda (Shizuoka University, Hamamatsu, Japan), Yasunori Okano (Osaka University, Toyonaka, Osaka, Japan), Tooru Eguchi, 14 Kazuyuki Hirota (Suzuki Motor Corporation, Hamamatsu, Shizuoka, Japan) AJTEC2011-44298 Effect of a Pair of Horizontal Frame Members on the Convective Heat Transfer with Laminar and Turbulent Flow from a Recessed Window to a Room, Patrick Oosthuizen (Queen’s University, Kingston, ON, Canada), David Naylor (Ryerson University, Toronto, ON, Canada)
Room: Waikiki 3 10:40-12:00, Monday, March 14 1-1-1 Enhanced Convection - 1
Session Organizer: Amanie Abdelmessih (Saint Martin’s University, Lacey, WA, United States) Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Session Co-Organizer: Julie Asfia (Boeing Company, Huntington Beach, CA, United States) Session Co-Organizer: Kyoji Inaoka (Doshisha University, Kyoto, Japan) AJTEC2011-44020 Convective Heat Transfer Enhancement in Nanofluids: Real Anomaly or Analysis Artifact?, Jacopo Buongiorno, Lin-wen Hu (Massachusetts Institute of Technology, Cambridge, MA, United States), Naveen Prabhat (3/17 Vivek Khand Gomti Nagar, Uttar Pradish, India) AJTEC2011-44049 Influence of Particle Alignment on Thermal Diffusivity in Transformer Cores Made of Polymer Bonded Soft Magnetic Composites, Mathias Anhalt, Bernd Weidenfeller (Clausthal University of Technology, Clausthal-Zellerfeld, Germany) AJTEC2011-44054 Correlation Between Thermal Diffusivity and Dynamic Mechanical Properties of Soft Magnetic Particle Filled Thermoplastic Composites, Stefan Kirchberg, Mathias Anhalt, Bernd Weidenfeller (Clausthal University of Technology, Clausthal-Zellerfeld, Niedersachsen, Germany) AJTEC2011-44127 Detailed Heat Transfer Measurements Inside Rotating Ribbed Channels Using the Transient Liquid Crystal Technique, Justin Lamont, Srinath Ekkad (Virginia Tech, Blacksburg, VA, United States)
Room: Waikiki 3 13:40-15:00, Monday, March 14 1-1-6 Enhanced Convection - 2 Session Organizer: Qiusheng Liu (Kobe University, Kobe, Japan) AJTEC2011-44128 An Annular Impinging Jet Alternated by Pulse-Modulated Synthetic Jets, Zdenek Travnicek, Vaclav Tesar (Institute of Thermomechanics AS CR, Prague 8, Czech Republic) AJTEC2011-44161 Film-Cooling Performance of Anti-Vortex Hole on a Flat Plate, Christopher LeBlanc, Diganta Narzary, Srinath Ekkad (Virginia Polytechnic Institute and State University, Blacksburg, VA, United States) AJTEC2011-44245 Numerical Predictions of Thermal and Hydraulic Performances of Heat Sinks with Enhanced Heat Transfer Capability, Feng Zhou (Southeast University, Nanjing, Jiangsu, China), Nicholas Hansen, Ivan Catton (University of California, Los Angeles, Los Angeles, CA, United States) AJTEC2011-44247 VAT Based Modeling of Plate-Pin Fin Heat Sink and Obtaining Closure from CFD Solution, Feng Zhou (Southeast University, Nanjing, Jiangsu, China), Nicholas Hansen, Ivan Catton (University of California, Los Angeles, Los Angeles, CA, United States)
Room: Waikiki 3 15:20-16:40, Monday, March 14 1-1-7 Enhanced Convection - 3 Session Organizer: Kazuya Tatsumi (Kyoto University, Kyoto, Japan) AJTEC2011-44254 Heat Transfer Augmentation and Suppression in Optimal Rotating Cylinders in Cross-Flow, Tunde 15 Bello-Ochende, Josua P. Meyer, Oluseun I. Ogunronbi (University of Pretoria, Preotia, Gauteng, South Africa) AJTEC2011-44266 Heat Transfer Enhancement by Means of a Rotation Cylinder, Daiki Hirawa, Kyoji Inaoka, Mamoru Senda (Doshisha University, Kyotanabe, Kyoto, Japan) AJTEC2011-44555 Experimental Analysis of the Single-Phase Heat Transfer and Friction Factor Inside the Horizontal Internally Micro-Fin Tube, Hou Kuan Tam, Lap Mou Tam (University of Macau, Macau, China), Afshin J. Ghajar (Oklahoma State University, Stillwater, OK, United States)
AJTEC2011-44495 Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Investigation of Circular Water Jet Impingement Heat Transfer, Cuicui Liu, Zeyi Jiang, Xinxin Zhang (University of Science and Technology Beijing, Beijing, China), Qiang Ma, Yusheng Sun (China Aviation Planning and Construction Development Co, LTD, Beijing, China)
Track 2: Combustion and Energy Systems Track Chair: Mamoru Tanahashi (Tokyo Institute of Technology, Tokyo, Japan) Track Co-Chair: S.A. Sherif (University of Florida, Gainesville, FL, United States) Track Co-Chair: Mohamed El-Genk (University of New Mexico, Albuquerque, United States)
Room: Kona Moku C 10:40-12:00, Monday, March 14 2-2-1 Heat and Mass Transfer in Combustion Systems I - Gasification - Session Organizer: Kaoru Maruta (Tohoku University, Sendai, Japan) Session Co-Organizer: Kris L Jorgensen (The Babcock & Wilcox Company, Barberton, OH, United States) AJTEC2011-44261 Experimental Study on Polymer Pyrolysis in High-Temperature Air Diluted by H2O an CO2 Using Stagnation-Point Flow, Yasuhiro Ogami, Makoto Mori, Kentaro Yoshinaga, Hideaki Kobayashi (Institute of Fluid Science, Tohoku University, Sendai, Japan) AJTEC2011-44338 Char Y Tar Production from Dairy Biomass Gasification Using Air-Steam for Partial Oxidation, Gerardo Gordillo (Los Andes University, Bogota, Cundinamarca, Colombia), Kalyan Annamalai (Texas A&M University, College Station, TX, United States) AJTEC2011-44308 Comparison of Models Used to Predict the Gas Composition of Mixtures Produces by Gasification of Wax Palm Husk Using Airsteam for Partial Oxidation, Maria Fernanda Contreras, Gerardo Gordillo (Los Andes University, Bogota, Cundinamarca, Colombia) AJTEC2011-44307 Modeling and Simulation of Gasification of Indian Coal and Pet-Coke, Pushpavanam Subramaniam (I.I.T Madras, Chennai, Tamil Nadu, India), Ankit Bhatnagar (Reliance Industries Limited, Jamnagar, Gujrat, India)
Room: Kona Moku C 13:40-15:00, Monday, March 14 2-2-2 Heat and Mass Transfer in Combustion Systems II - Flame Dynamics - Session Organizer: Chenn Zhou (Purdue University Calumet, Hammond, IN, United States) Session Co-Organizer: Yasuhiro Ogami (Institute of Fluid Science, Tohoku University, Sendai, Japan) AJTEC2011-44181 Numerical Simulation on the Instability of Cylindrically Expanding Premixed Flames with Radiative Heat Loss at Low Lewis Numbers, Satoshi Kadowaki, Takafumi Kusakai (Nagaoka University of Technology, Nagaoka, Niigata, Japan) AJTEC2011-44222 Flame Fractal Dimension Induced by Hydrodynamic Instability, Yukari Wada, Kazunori Kuwana 16 (Yamagata University, Yonezawa, Yamagata, Japan) AJTEC2011-44477 Internal Fire Whirls Induced by Pool Fire in a Vertical Shaft, W.K. Chow (The Hong Kong Polytechnic University, Hong Kong, China), Yan Huo, Ye Gao (Harbin Engineering University, Heilongjiang, China) AJTEC2011-44250 Experimental Study on Characteristics of Methane-Coal Dust Mixture Explosion and Its Mitigation by Ultra-Fine Water Mist, Hongli Xu, Xishi Wang, Rui Gu, Heping Zhang (University of Science & Technology of China, Hefei, Anhui, China)
Room: Kona Moku C Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 15:20-15:40, Monday, March 14 2-2-3 Heat and Mass Transfer in Combustion Systems III - Novel Gaseous Combustion - Session Organizer: Fumiteru Akamatsu (Osaka University, Suita, Osaka, Japan) Session Co-Organizer: Chenn Zhou (Purdue University Calumet, Hammond, IN, United States) AJTEC2011-44216 The Effect of Distance Between Fuel and Oxidizer Nozzles on NOx Emission from High Temperature Air Combustion, Yuzuru Nada, Yasutomo Zenman, Takahiro Ito, Susumu Noda (Toyohashi University of Technology, Toyohashi, Aichi, Japan) AJTEC2011-44143 Performance Tests for a Dry Low NOx Combustor Development, Hyung-mo Kim, Poo-min Park, Soo-seok Yang (Korea Aerospace Research Institute, Daejeon, Korea (Republic)), Young-sung Ko (Chungnam National University, Daejeon, Korea (Republic)) AJTEC2011-44042 Investigation of the Working Processes in a Gas Turbine Combustor with Steam Injection, Serhiy Serbin, Anna Mostipanenko (National University of Shipbuilding, Mikolayiv, Ukraine), Igor Matveev (Applied Plasma Technologies, McLean, VA, United States)
Room: Milo III 10:40-12:00, Monday, March 14 2-4-1 Heat and Mass Transfer in Energy Devices I - Fuel Cell 1- Session Organizer: Yutaka Tabe (Hokkaido University, Sapporo, Hokkaido, Japan) Session Co-Organizer: Julie Asfia (Boeing Company, Huntington Beach, CA, United States) AJTEC2011-44416 Influence of Cell Components Structure on Coupling Phenomena in Single Cell of Polymer Electrolyte Fuel Cell, Akira Nishimura, Atsushi Morimoto, Shigeki Tanaka, Atsushi Oshima, Masafumi Hirota (Mie University, Tsu, Mie, Japan), Eiji Tohma, Yukio Kimura, Masahiko Narita (TOHO GAS Co., LTD., Tokai, Aichi, Japan) AJTEC2011-44369 Improvement of PEFC Cell Performance with a Movable Rib, Hirofumi Tanigawa, Ryoji Hakataya, Takaharu Tsuruta (Kyushu Institute of Technology, Kitakyushu, Japan) AJTEC2011-44549 Measurement of Water, Temperature and Current Distributions in Anode of Polymer Electrolyte Fuel Cell During Low Humidity Operation, Kosuke Nishida, Yoma Yokoi, Kazumasa Umed (Kyoto Institute of Technology, Kyoto, Japan), Shohji Tsushima, Shuichiro Hirai (Tokyo Institute of Technology, Tokyo, Japan) AJTEC2011-44510 Analysis of Mass Transport Loss in PEMFC Induced by Rib/Channel Geometry, Yuichiro Tabuchi, Takeshi Shiomi, Yosuke Fukuyama, Osamu Aoki, Norio Kubo, Kazuhiko Shinohara (Nissan Motor Co., Ltd, Yokosuka, Kanagawa, Japan)
Room: Milo III 13:40-15:00, Monday, March 14 2-4-2 Heat and Mass Transfer in Energy Devices II - Fuel Cell 2- 17 Session Organizer: Wojciech Lipinski (University of Minnesota, Minneapolis, MN, United States) Session Co-Organizer: Akira Nishimura (Mie University, Tsu, Mie, Japan) AJTEC2011-44525 Measurements of Heat and Mass Transport Characteristics Through PEMFC GDL, Takuto Araki, Nobuyoshi Tachibana, Haruki Kaneko, Koichi Ota (Yokohama National University, Yokohama, Kanagawa, Japan) AJTEC2011-44517 Microscopic Observation of Ice Distribution in PEM Fuel Cell at Cold Start, Yutaka Tabe, Masataka Saito, Ryosuke Ichikawa, Takemi Chikahisa (Hokkaido University, Sapporo, Hokkaido, Japan)
AJTEC2011-44481 Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Investigation of Liquid Water Behaviors in Carbon Paper GDL for PEMFCs by Soft X-Ray Radiography, Shohji Tsushima, Takashi Sasabe, Shuichiro Hirai (Tokyo Institute of Technology, Tokyo, Japan) AJTEC2011-44364 Structural Effects of Cathode Catalyst Layer on the Performance of PEFC, Hidetoshi Matsuda (Tokyo institute of technology, Meguro-ku, Tokyo, Japan), Atsushi Ohma (Nissan Research Center, Meguro-ku, Tokyo, Japan), Kazuyoshi Fushinobu, Ken Okazaki (Tokyo institute of technology, Meguro-ku, Tokyo, Japan)
Room: Milo III 15:20-16:40, Monday, March 14 2-4-4 Heat and Mass Transfer in Energy Devices IV -Micro & Nano Scale Phenomena in Energy Devices- Session Organizer: Shohji Tsushima (Tokyo Institute of Technology, Tokyo, Japan) Session Co-Organizer: Wojciech Lipinski (University of Minnesota, Minneapolis, MN, United States) AJTEC2011-44365 Fuel Gas Production by Plasma in a Microwave Oven at Atmospheric Pressure, Shinfuku Nomura (Ehime University, Matsuyama, Japan), Andi Erwin Eka Putra (Hasanuddin University, Makassar, Indonesia), Hiromichi Toyota, Shinobu Mukasa, Hiroshi Yamashita (Ehime University, Matsuyama, Japan) AJTEC2011-44620 Experimental Analysis of Thermal and Electric Transport Characteristics of Nano-Gaps, Kohei Ito, Tomoaki Hagio (Kyushu University, Fukuoka, Japan), Akira Matsuo, Yasushi Iwaisako (Nippon Tungsten Co., Ltd., Miyaki-gun, Kiyama-cho, Japan), Osamu Nakabeppu (Meiji University, Kawasaki, Kanagawa, Japan) AJTEC2011-44633 Performance Characterization of an Microscale Integrated Combustor Oil Heat Exchanger, Mohammad Ghazvini, Vinod Narayanan (Oregon State University, Corvallis, OR, United States) AJTEC2011-44450 Numerical Simulations versus Experimental Data for a Pyroelectric Energy Converter Harvesting Waste Heat, Brian A. James, Ashcon Navid, Raylene C. Moreno, Laurent Pilon (University of California, Los Angeles, Los Angeles, CA, United States)
Track 3: Micro/Nano Scale Phenomena Track Chair: Shigeo Maruyama (The University of Tokyo, Tokyo, Japan) Track Co-Chair: Taku Ohara (Tohoku University, Sendai, Japan) Track Co-Chair: Leslie Phinney (Sandia National Laboratories, Albuquerque, NM, United States) Track Co-Chair: Alexis Abramson (Case Western Reserve University, Cleveland, OH, United States)
Room: Kona Moku A 10:40-12:00, Monday, March 14 3-2-1 Transport Phenomena in Nanoscale Systems for Enhanced Energy Transfer Session Organizer: Arvind Narayanaswamy (Columbia University, United States) Session Co-Organizer: Masahiko Shibahara (Osaka University, Osaka, Japan) AJTEC2011-44607 18 Heat Conduction Effect on Oscillating Heat Pipe Operation, Chris Smoot, Corey Wilson, Hongbin Ma (University of Missouri, Columbia, MO, United States), Larry Greenberg (Northrop Grumman Corporation, baltimore, MD, United States) AJTEC2011-44642 Specification of Micro-Nanoscale Radiative Patterns Using Inverse Analysis for Increasing Solar Panel Efficiency, Shima Hajimirza (The University of Texas at Austin, Austin, TX, United States), Georges El Hitti (Mines ParisTech, Paris, Ile de France, France), Alex Heltzel, John Howell (The University of Texas at Austin, Austin, TX, United States) AJTEC2011-44635
Analysis of a Graphene/Ultrathin Graphite Heat Exchanger for Aerospace Thermal Management, Alex Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Heltzel (PC Krause and Associates, Inc., West Lafayette, IN, United States), Columbia Mishra (Department of Mechanical Engineering and the Texas Materials Institute, Austin, TX, United States), Andrew Fleming (U.S. Air Force Research Laboratory, Wright-Patterson Air Force Base, OH, United States), Rodney S. Ruoff (University of Texas at Austin, Austin, TX, United States) AJTEC2011-44208 Optimized Ionic Wind-Based Cooling Microfabricated Devices for Improving a Measured Coefficient of Performance, Andojo Ongkodjojo Ong, Alexis R. Abramson, Norman C. Tien (Case Western Reserve University, Cleveland, OH, United States)
Room: Kona Moku A 13:40-15:00, Monday, March 14 3-2-2 Transport Phenomena in Nanostructures for Energy Systems Session Organizer: Arvind Narayanaswamy (Columbia University, United States) Session Co-Organizer: Mitsuhiro Matsumoto (Kyoto University, Kyoto, Japan) AJTEC2011-44492 Electromagnetic Energy Transport in Multi-Layered Nanoshell Cluster, Changhong Liu (Shanghai Jiao Tong University, Shanghai, China), Ben Q. Li (University of Michigan, Dearborn, MI, United States) AJTEC2011-44526 Ion Transport in Mesoporous Silica Thin Films, Hirofumi Daiguji, Daisuke Nakayama, Asuka Takahashi (The University of Tokyo, Kashiwa, Chiba, Japan), Sho Kataoka, Akira Endo (National Institute of Advanced Industrial Science and Technology, Tsukuba, Ibaraki, Japan) AJTEC2011-44195 A Molecular Dynamics Study for Diffusivity of Proton in Polymer Electrolyte Membrane, Takashi Tokumasu (Institute of Fluid Science, Tohoku University, Sendai, Miyagi, Japan), Taiki Yoshida (Graduate School of Engineering, Tohoku University, Sendai, Miyagi, Japan)
Room: Kona Moku A 15:20-16:40, Monday, March 14 3-2-3 Transport Analysis for Nanoscale Energy Systems Session Organizer: Arvind Narayanaswamy (Columbia University, United States) Session Co-Organizer: Kenji Yasuoka (Keio University, Yokohama, Kanagawa, Japan) AJTEC2011-44504 NEGF Quantum Simulation of Field Emission Devices, Terence Musho, D. G. Walker, S. M. Claiborne (Vanderbilt University, Nashville, TN, United States) AJTEC2011-44309 Control of Dielectric Fluid Flow Distribution in Micro-Tubes with EHD Conduction Pumping - Numerical Study, Miad Yazdani (United Technologies Research Centre, East Hartford, CT, United States), Jamal Yagoobi (Illinois Institute of Technology, Chicago, IL, United States) AJTEC2011-44239 Investigating the Effect of Pipe Inclination on Two-Phase Gas-Liquid Flows Using Advanced Instrumentation, Abolore Abdulahi, Lokman Abdulkareem, Sharaf Safa, Mukhtar Abdulkadir, Valente Hernandez Perez, B.J. Azzopardi (University of Nottingham, Nottingham, Nottingham, United Kingdom)
19 Room: Kona Moku B 10:40-12:00, Monday, March 14 3-1-1 Phonon Transport in Nano and Molecular Systems Session Organizer: Xinwei Wang (Iowa State University, Ames, IA, United States) Session Co-Organizer: Koji Miyazaki (Kyushu Institute of Technology, Kitakyushu, Fukuoka, Japan) AJTEC2011-44341 Phonon Transport in Asymmetric Sawtooth Nanowires, Nick Roberts, D. G. Walker (Vanderbilt University, Nashville, TN, United States) AJTEC2011-44129
A Hybrid SN-PN Formulation for Solution of the Boltzmann Transport Equation for Phonons, Arpit Mittal, Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Sandip Mazumder (Ohio State University, Columbus, OH, United States) AJTEC2011-44111 Excitation of Single Phonon Modes in Nanoscale Waveguides, Drew A. Cheney, Jennifer R. Lukes (University of Pennsylvania, Philadelphia, PA, United States) AJTEC2011-44060 Direct Simulation of the Nonlinear Boltzmann Transport Equation for Phonons, Yusuke Masao, Mitsuhiro Matsumoto (Kyoto University, Kyoto, Japan)
Room: Kona Moku B 13:40-15:00, Monday, March 14 3-1-2 Boundary Resistance and Conductance Session Organizer: Xiulin Ruan (Purdue University, West Lafayette, IN, United States) Session Co-Organizer: Yasutaka Yamaguchi (Osaka University, Suita, Osaka, Japan) AJTEC2011-44314 Assesment of Vibrational Coupling at Solid-SAM-Solid Junctions, Christopher B. Saltonstall, John C. Duda, Pamela Norris (University of Virginia, Charlottesville, VA, United States), Patrick Hopkins (Sandia National Labs, Albuquerque, NM, United States) AJTEC2011-44478 A Molecular Dynamics Study on Heat Transfer Characteristics over the Interface of Self-Assembled Monolayer and Water Solvent, Gota Kikugawa, Taku Ohara (Tohoku University, Sendai, Japan), Toru Kawaguchi, Ikuya Kinefuchi, Yoichiro Matsumoto (The University of Tokyo, Tokyo, Japan) AJTEC2011-44643 A Quantum Mechanical Study of the Thermal Conduction Across a ZrB2-SiC Interface as a Function of Temperature and Strain, Vikas Samvedi, Vikas Tomar (Purdue University, West Lafayette, IN, United States) AJTEC2011-44351 Slip Due to Rarefaction, Surface Roughness, and Intermolecular Interactions for Gases and Liquids, Phillip Ligrani (Saint Louis University, St. Louis, MO, United States)
Room: Kona Moku B 15:20-16:40, Monday, March 14 3-1-3 Boundary Resistance and Thermal Conductivity of Complex Molecular Systems Session Organizer: Yuji Nagasaka (Dept. of System Design Eng., Keio University, Yokohama, Japan) Session Co-Organizer: Xiulin Ruan (Purdue University, West Lafayette, IN, United States) AJTEC2011-44600 Molecular Dynamics of Thermal Boundary Resistance Between a Carbon Nanotube and Surrounding Fluids, Jin Hyeok Cha, Shohei Chiashi, Jun-ichiro Shiomi, Shigeo Maruyama (Department of Mechanical Engineering, The University of Tokyo, Tokyo, Japan) AJTEC2011-44320 Contact Thermal Resistance Between Individual Multi-Wall Carbon Nanotubes, Juekuan Yang, Scott Waltermire, Yang Yang, Deyu Li (Vanderbilt University, Nashville, TN, United States), Yunfei Chen (Southeast University, Nanjing, Nanjing, Jiangsu Province, China) AJTEC2011-44465 20 Effect of Alkyl Chain Length on Molecular Heat Transfer Characteristics in Lipid Bilayers, Takeo Nakano, Gota Kikugawa, Taku Ohara (Tohoku University, Sendai, Japan) AJTEC2011-44656 Atomistic Scale Thermal Transport in Amorphous Materials and Its Interfaces, A. K. Roy (Air Force Research Laboratory, Wright-Patterson, OH, United States), Vikas Varshney, Jonghoon Lee (Universal Technology Corporation, Dayton, OH, United States), Sabyasachi Ganguli, Sangwook Sihn (University of Dayton Research Institute, Dayton, OH, United States), Barry Farmer (Air Force Research Laboratory, Wright-Patterson AFB, OH, United States)
Room: Milo IV&V Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 10:40-12:00, Monday, March 14 3-3-1 Experimental Techniques for Micro- and Nanoscale Property Measurements - 1 Session Organizer: Keunhan (Kay) Park (University of Rhode Island, Kingston, RI, United States) Session Co-Organizer: Shuhei Inoue (Hiroshima University, Higashi-Hiroshima, Hiroshima, Japan) AJTEC2011-44340 Measurements of the Intrinsic Thermal Conductivity of Individual Multi-Wall Carbon Nanotubes, Juekuan Yang, Scott Waltermire, Yang Yang, Deyu Li (Vanderbilt University, Nashville, TN, United States), Yunfei Chen (Southeast University, Nanjing, Nanjing, Jiangsu Province, China) AJTEC2011-44380 Development of the Thermal Flash Method for Characterization of Carbon Nanofibers, Nayandeep K. Mahanta, Alexis R. Abramson (Case Western Reserve University, Cleveland, OH, United States) AJTEC2011-44421 Infrared Imaging Microscope as an Effective Tool for Measuring Thermal Resistance of Emerging Interface Materials, Andrew McNamara, Vivek Sahu, Yogendra Joshi, Zhuomin Zhang (Georgia Institute of Technology, Atlanta, GA, United States) AJTEC2011-44097 Raman and Infrared Thermometry for Microsystems, Leslie Phinney (Sandia National Laboratories, Albuquerque, NM, United States), Wei-Yang Lu (Sandia National Laboratories, Livermore, CA, United States), Justin R. Serrano (Sandia National Laboratories, Albuquerque, NM, United States)
Room: Milo IV&V 13:40-15:00, Monday, March 14 3-3-2 Experimental Techniques for Micro- and Nanoscale Property Measurements - 2 Session Organizer: Bong Jae Lee (University of Pittsburgh, Pittsburgh, PA, United States) Session Co-Organizer: Koji Miyazaki (Kyushu Institute of Technology, Kitakyushu, Fukuoka, Japan) AJTEC2011-44489 Femtogram-Level Thermophysical Property Measurement of Polymeric Samples Using Heated Microcantilevers, Andrew Gauffreau, Keunhan (Kay) Park (University of Rhode Island, Kingston, RI, United States) AJTEC2011-44508 A Platform for Thermal Property Measurements and Transmission Electron Microscopy of Nanostructures, Tom Harris, Julio Martinez, Eric Shaner, Brian S. Swartzentruber, Jianyu Huang, John Sullivan (Sandia National Laboratories, Albuquerque, NM, United States), Gang Chen (Massachusetts Institute of Technology, Cambridge, MA, United States) AJTEC2011-44574 High-Speed Transient Temperature Profile Control Using Adjoint-Based Optimal Control Scheme, Satoru Ito, Yuji Suzuki (The University of Tokyo, Tokyo, Japan) AJTEC2011-44302 Development and Characterization of an Electroplated Copper Nickel Alloy-Platinum Micro-Thermocouple, Chan Ching, Simon Loane, Ravi Selvaganapathy, Chan Ching (McMaster University, Hamilton, ON, Canada)
21 Room: Milo IV&V 15:20-16:40, Monday, March 14 3-3-13 Phase Change Materials, Condensation, and Combustion Session Organizer: Hirofumi Daiguji (The University of Tokyo, Kashiwa, Chiba, Japan) Session Co-Organizer: Yoav Peles (R.P.I., Troy, NY, United States) AJTEC2011-44230 High Temperature Thermal Characterization of Ge(2)Sb(2)Te(5) for Phase Change Memory, Jaeho Lee (Stanford University, Stanford, CA, United States), John P. Reifenberg (Intel Corporation, Santa Clara, CA, United States), Mehdi Asheghi, Kenneth Goodson (Stanford University, Stanford, CA, United States)
AJTEC2011-44226 Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Numerical Study of Performance Enhancement of Single-Shot Heat Sinks Using Nano-Enhanced Phase Change Material, Ingrid Cotoros, Ab Hashemi (Lockheed Martin, Advanced Technology Center, Palo Alto, CA, United States) AJTEC2011-44050 Thermal Properties of Polyurethane Shape Memory Polymer Filled with Magnetite Particles, Bernd Weidenfeller (Clausthal University of Technology, Clausthal-Zellerfeld, Germany), Hauke Marquardt (German Research Center for Geosciences GFZ, Potsdam, Germany), Muhammad Y. Razzaq (Helmholtz-Zentrum Geesthacht, Teltow, Germany), Mathias Anhalt (Clausthal University of Technology, Clausthal-Zellerfeld, Germany), Lars Frormann (Fachhochschule Zwickau, Zwickau, Germany), Frank R. Schilling (Karlsruhe Institute of Technology, Karlsruhe, Germany) AJTEC2011-44342 Observation of Micro Premixed Flames Surrounded by High Temperature Burned Gas Flow, Manabu Fuchihata, Tamio Ida (Kinki University, Higashi-Osaka, Osaka, Japan), Kazunori Kuwana (Yamagata University, Yonezawa, Yamagata, Japan), Satoru Mizuno (Kinki University, Higashi-Osaka, Osaka, Japan)
22
Tuesday, March 15
Track 4: Keynote Lectures Track Chair: Kenji Yasuoka (Keio University, Yokohama, Kanagawa, Japan) Track Co-Chair: James Klausner (Univesity of Florida, Gainesville, FL, United States)
Room: Kona Moku Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 9:00-9:40, Tuesday, March 15 4-1-1 Keynote - 3 Session Organizer: Jungho Kim (University of Maryland, College Park, MD, United States) AJTEC2011-44005 Two-Phase Micro-Channel Heat Sinks: Theory, Applications and Limitations, Issam Mudawar (Purdue University, West Lafayette, IN, United States)
Room: Kona Moku 9:40-10:20, Tuesday, March 15 4-1-2 Keynote - 4 Session Organizer: Roy Hogan (Sandia National Laboratories, Albuquerque, NM, United States) AJTEC2011-44645 Spacecraft Thermal Management, Bruce Drolen (The Boeing Company, Los Angeles, United States)
Track 1: Fundamentals of Heat and Mass Transfer Track Chair: Kazuyoshi Nakabe (Kyoto University, Kyoto, Kyoto, Japan) Track Co-Chair: Raj M. Manglik (University of Cincinnati, Cincinnati, OH, United States) Track Co-Chair: Chang Oh (Idaho National Laboratory, Idaho Falls, ID, United States)
Room: Honolulu 10:40-12:00, Tuesday, March 15 1-4-2 Heat Pipe, Evaporator, Condenser, Thermal Cycle - 1 Session Organizer: Akio Tomiyama (Kobe University, Kobe, Japan) Session Co-Organizer: Masahiro Kawaji (City College of New York, New York, NY, United States) AJTEC2011-44015 The Constrained Vapor Bubble Experiment - Results From the International Space Station, Arya Chatterjee, Joel Plawsky, Peter Wayner, Jr. (Rensselaer Polytechnic Institute, Troy, NY, United States), David F. Chao, Ronald J. Sicker (NASA Glenn Research, Cleveland, OH, United States), Louis Chestney, Tibor Lorik, John Eustace, John Zoldak (Zin Technologies, Cleveland, OH, United States) AJTEC2011-44190 Liquid Film Thickness of Oscillating Flow in a Micro Tube, Youngbae Han, Naoki Shikazono, Nobuhide Kasagi (The University of Tokyo, Tokyo, Japan) AJTEC2011-44010 Experimental Adiabatic Two-Phase Pressure Drops of R134a, R236fa and R245fa in Small Horizontal Circular Channels, Chin Lee Ong (IBM Zurich Research Laboratory, Ruschliklon, Switzerland), John R. Thome (Ecole Polytechnique Fédérale de Lausanne, Lausanne, Vaud, Switzerland) AJTEC2011-44262 Effects of Pitch and Depth on the Condensation Heat Transfer of R-134a Flowing Through Corrugated Tubes, Suriyan Laohalertdecha, Somchai Wongwises (King Mongkut’s University of Technology Thonburi, Bangkok, Thailand)
23 Room: Honolulu 13:40-15:00 Tuesday, March 15 1-4-7 Heat Pipe, Evaporator, Condenser, Thermal Cycle - 2 Session Organizer: Ali Siahpush (INL, Idaho Falls, ID, United States) Session Co-Organizer: Tomoaki Kunugi (Kyoto University, Kyoto, Japan) AJTEC2011-44258 Flashing Flow Mechanisms of HFC-134a and HFC-410a Through Short-Tube Orifices, Kitti Nilpueng, Somchai Wongwises (King Mongkut’s University of Technology Thonburi, Bangkok, Thailand) AJTEC2011-44267
Comparison of Various Alternative Refrigerants for Vapour Compression Refrigeration Systems, Ahmet Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Selim Dalkilic (Yildiz Technical University, Istanbul, Turkey), Somchai Wongwises (King Mongkut’s University of Technology Thonburi, Bangkok, Thailand) AJTEC2011-44119 Neutron Imaging Feasibility of Liquid Metal Coolant Behaviors Inside a High Temperature Alloy Heat Pipe, Kenneth Kihm (University of Tennessee, Knoxville, TN, United States), Daniel Hussey (National Institute of Standards and Technology, Gaitherburgh, MD, United States), David Pratt (USAF, WPAFB, OH, United States), Andrew Swanson (AFRL/RBSA, Wright-Patterson AFB, OH, United States)
Room: Honolulu 15:20-16:40 Tuesday, March 15 1-4-4 Boiling Heat Transfer Session Organizer: M. Erol Ulucakli (Lafayette College, Easton, PA, United States) Session Co-Organizer: Hisato Minagawa (The University of Shiga Prefecture, Siga, Japan) AJTEC2011-44519 Heat Transfer Characteristics of Isolated Bubble Nucleate Boiling of Water, Tomohide Yabuki, Osamu Nakabeppu (Meiji University, Kawasaki, Japan) AJTEC2011-44045 Pool Boiling Heat Transfer of Highly Wetting Fluids on Smooth Metallic Surfaces, Bradley Bon, James Klausner (University of Florida, Gainesville, FL, United States) AJTEC2011-44401 Numerical Study on Subcooled Pool Boiling, Yasuo Ose, Tomoaki Kunugi (Kyoto University, Kyoto, Japan) AJTEC2011-44408 Enhancement of Saturation Boiling of PF-5060 on Microporous Surface, Saeil Jeon, Byeongnam Jo, Debjyoti Banerjee (Texas A&M University, College Station, TX, United States)
Room: Kou 10:40-12:00 Tuesday, March 15 1-8-5 Instrumentation - II Session Organizer: Raj M. Manglik (University of Cincinnati, Cincinnati, OH, United States) Session Co-Organizer: Atsuki Komiya (Tohoku University, Sendai, Miyagi, Japan) AJTEC2011-44287 Phosphor Thermometry by Using Rare Earth-Doped Yttrium Oxides, Naohiro Ishiwada (Keio University, Tokyo, Japan), Satoko Fujioka, Toshihisa Ueda, Takeshi Yokomori (Keio University, Kanagawa, Japan) AJTEC2011-44639 Magnetic Resonance Imaging Techniques for Measuring Film Cooling Flow Velocity and Effectiveness, Christopher J. Elkins, Emin Issakhanian, John K. Eaton (Stanford University, Stanford, CA, United States) AJTEC2011-44461 Microscopic Fluid Temperature Measurements Using Fluorescence Polarization Method, Kazuya Tatsumi, Akihisa Tozaki, Kazuyoshi Nakabe (Kyoto University, Kyoto, Kyoto, Japan) AJTEC2011-44612 Electric Charge of Micro and Nano Bubbles by Interferometric Laser Imaging Technique, Tomohiro 24 Sekiguchi, Tatsuya Kawaguchi, Isao Satoh, Takushi Saito (Tokyo Institute of Technology, Tokyo, Japan)
Room: Kou 13:40-15:00 Tuesday, March 15 1-8-3 Diagnostics Session Organizer: Kazuyoshi Nakabe (Kyoto University, Kyoto, Japan) AJTEC2011-44444 Evaluation of Gas Permeability in Microfluidic Devices by Confocal Micro-PIV Combined with LIF Technique, Mitsuhisa Ichiyanagi (The University of Tokyo, Tokyo, Japan), Keita Sakai, Shinya Kidani,
Yasuhiro Kakinuma, Yohei Sato, Koichi Hishida (Keio University, Yokohama, Japan) Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 AJTEC2011-44485 Impact of Interstitial Mass Transport Resistance on Water Vapor Diffusion Through Southern Mills DefenderTM 750 Fabric Layers, Anshul Sharma (University of Texas - Austin, Austin, TX, United States), Sandra Boetcher (University of North Texas, Denton, TX, United States), Walid Aissa (King AbdulAziz University, Faculty of Engineering at Rabigh, Rabigh, Saudi Arabia), Matthew Traum (University of North Texas, Denton, TX, United States) AJTEC2011-44232 Evaluation of Effective Thermal Conductivity of Multilayer Printed Circuit Board, Yasushi Koito, Toshio Tomimura, Yoshihiro Shiotsu (Kumamoto University, Kumamoto, Japan), Masaru Ishizuka, Tomoyuki Hatakeyama (Toyama Prefectural University, Toyama, Japan) AJTEC2011-44557 Validation of a Thermal Conductivity Measurement System for Fuel Compacts, Colby Jensen, Changhu Xing, Heng Ban (Utah State University, Logan, UT, United States), Jeffrey Phillips (Idaho National Laboratory, Idaho Falls, ID, United States)
Room: Waikiki 1 10:40-12:00 Tuesday, March 15 1-3-10 Condensation and Miscellaneous Session Organizer: Niro Nagai (University of Fukui, Fukui, Japan) Session Co-Organizer: Peter de Bock (GE Global Research Center, Niskayuna, NY, United States) AJTEC2011-44532 Study on Condensation Heat Transfer of Micro Structured Surfaces (Effect on Condensation Heat Transfer of Metal-Spattering Surfaces), Hiroyasu Ohtake, Takeru Komatsu (Kogakuin University, Tokyo, Japan), Yasuo Koizumi (Shinshu University, Ueda, Nagano, Japan) AJTEC2011-44155 Cooling-Induced Depressurization of a Steam-Filled Chamber, Pengfei He, Chao Zhu (New Jersey Institute of Technology, Newark, NJ, United States), Chao-Hsin Lin (Boeing Commercial Airplanes, Seattle, WA, United States), Rajesh Patel (New Jersey Institute of Technology, Newark, NJ, United States) AJTEC2011-44502 Effects of Local Concentration on Freezing Solutions of Winter Flounder Antifreeze Protein, Yoshimichi Hagiwara (Kyoto Institute of Technology, Kyoto, Sakyo-ku, Japan), Ryo Sakurai (Fujitsu, Kumagaya, Japan), Daichi Yamamoto, Atsuhide Kitagawa (Kyoto Institute of Technology, Kyoto, Sakyo-ku, Japan) AJTEC2011-44092 Functional Materials for Energy Storage: Fabrication of Shape Stabilized Polymeric Phase Change Composites and the Determination of Their Thermophysical Properties for Use in Energy Conservation Applications, Anjum Saleem, Lars Frormann (University of Applied Sciences, Zwickau, Germany)
Room: Waikiki 1 13:40-15:00 Tuesday, March 15 1-3-11 Pool Boiling - 1 Session Organizer: Masanori Monde (Saga University, Saga, Japan) Session Co-Organizer: Jungho Kim (University of Maryland, College Park, MD, United States) AJTEC2011-44122 25 Effect of the Bottom and Top Configurations on Pool Film Boiling Around a Vertical Finite-Length Cylinder, Satoru Momoki, Kenichi Araki, Toru Shigechi, Takashi Yamada (Nagasaki University, Nagasaki, Japan), Kaoru Toyoda (Maizuru National College of Technology, Kyoto, Japan), Tomohiko Yamaguchi, Odgerel Jambal (Nagasaki University, Nagasaki, Japan) AJTEC2011-44084 Water-Heating Pool Boiling of Different Refrigerants on a Horizontal Smooth Tube, Tailian Chen (Gonzaga University, Spokane, WA, United States) AJTEC2011-44449 On the Scaling of Pool Boiling Heat Flux with Gravity and Heater Size, Jungho Kim, Rishi Raj (University
of Maryland, College Park, MD, United States), John McQuillen (NASA Glenn Research Center, Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Cleveland, OH, United States) AJTEC2011-44498 Concerning the Effect of Surface Material on Nucleate Boiling Heat Transfer of R-113, Reza Hosseini, Amir Gholaminejad, Mahdi Nabil (Amirkabir University of Technology, Tehran, Tehran, Iran), Mohammad Hossein Samadinia (The Islamic Azad University, West Tehran Branch, Tehran, Tehran, Iran)
Room: Waikiki 1 15:20-16:40 Tuesday, March 15 1-3-4 Pool Boiling - 2 Session Organizer: Lars Frormann (Fachhochschule Zwickau, Zwickau, Germany) Session Co-Organizer: Yasuo Koizumi (Shinshu University, Ueda, Nagano, Japan) AJTEC2011-44286 Interaction of Liquid and Heating Surface During Nucleate Boiling Processes, Juris Ekmanis (Latvian Academy of Sciences, Institute of Physical Enegetics, Riga, Latvia), Daniels Turlajs (Riga Technical University, Riga, Latvia), Namejs Zeltins (Latvian Academy os Sciences, Institute of Physical Energetics, Riga, Latvia), Sigurds Jaundalders (Riga Technical University, Riga, Latvia) AJTEC2011-44593 Enhancement of Pool Boiling and Critical Heat Flux in Self-Rewetting Fluids at Above Atmospheric Pressures, Mostafa Morovati, Hitesh Bindra (City College of New York, New York, NY, United States), Shuji Esaki (Kagoshima National College of Technology, Kirishima, Kagoshima, Japan), Masahiro Kawaji (City College of New York, New York, NY, United States) AJTEC2011-44065 Experimental Research of Boiling Heat Transfer Phenomena on Metal Surface in State of Low Gravitational Acceleration Field Between 0 g and 1 g, Eiji Nemoto (Ibaraki National College of Technology, Hitachinaka, Ibaraki, Japan), Tomohiro Saitoh (NAZKA Aerospace Engineering Aerosopace Design, Nagoya, Aichi, Japan)
Room: Waikiki 2 10:40-12:00 Tuesday, March 15 1-2-7 Computational Heat and Mass Transfer (Heat Conduction & Diffusion) - 1 Session Organizer: Sandip Mazumder (Ohio State University, Columbus, OH, United States) Session Co-Organizer: Ichiro Ueno (Tokyo University of Science, Noda, Chiba, Japan) AJTEC2011-44237 Analysis of One-Dimensional Hyperbolic Heat Conduction in a Functionally Graded Thin Plate, Mohammad Reza Raveshi, Shayan Amiri, Ali Keshavarz (K.N.Toosi University of Technology, Tehran, Iran) AJTEC2011-44177 Numerical Simulation of the Cooling Process of Cubic Shells, Manabu Okura (Tsurumi Industrial High School, Yokohama, Japan), Kiyoaki Ono (Nihon University, Tokyo, Japan) AJTEC2011-44167 Heat Transfer Between Colliding Surfaces and Particles, Like Li, Renwei Mei, James Klausner, David Hahn (University of Florida, Gainesville, FL, United States)
26 Room: Waikiki 2 13:40-15:00 Tuesday, March 15 1-2-13 Computational Heat and Mass Transfer (Heat Conduction & Diffusion) - 2 Session Organizer: Baratunde Cola (Georgia Institute of Technology, Atlanta, GA, United States) Session Co-Organizer: Kazuya Tatsumi (Kyoto University, Kyoto, Kyoto, Japan), Session Co-Organizer: Laurent Pilon (University of California, Los Angeles, Los Angeles, CA, United States) AJTEC2011-44276 Thermal Conductivity of Cage-Like Structures, Mona Zebarjadi, Keivan Esfarjani, Gang Chen (Massachusetts Institute of Technology, Cambridge, MA, United States)
AJTEC2011-44578 Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Numerical Simulation of Heat and Mass Transfer of Limestone Decomposition in Lime Kiln, Do Duc Hai (University Magdeburg, Magdeburg, Germany), Eckehard Specht (Otto-von-Guericke-Universität Magdeburg, Magdeburg, Germany) AJTEC2011-44343 Thermal Properties of Yttrium Aluminum Garnett from Molecular Dynamics Simulations, Majid al-Dosari, D. G. Walker (Vanderbilt University, Nashville, TN, United States)
Room: Waikiki 2 15:20-16:40 Tuesday, March 15 1-1-2 Non-Newtonian Convection Session Organizer: Julie Asfia (Boeing Company, Huntington Beach, CA, United States) Session Co-Organizer: Kazuyoshi Nakabe (Kyoto University, Kyoto, Japan) AJTEC2011-44462 Structure of Low-Speed Streaks in Drag Reducing Flow with Polymer Solution Blown From the Channel Wall, Hening Xu, Shota Ishitsuka, Masaaki Motozawa (Tokyo University of Science, Noda, Chiba, Japan), Kaoru Iwamot (Tokyo University of Agriculture and Technology, Koganei, Tokyo, Japan), Hirotomo Ando, Tetsuya Senda (National Maritime Research Institute, Mitaka, Tokyo, Japan), Bo Yu (China University of Petroleum, Beijing, China), Yasuo Kawaguchi (Tokyo University of Science, Noda, Chiba, Japan) AJTEC2011-44464 Simultaneous PIV and PLIF Measurement on the Drag Reducing Channel Flow of the Homogeneous Surfactant Solution, Takahiro Watanabe, Kohei Tanaka, Masaaki Motozawa, Yasuo Kawaguchi (Tokyo University of Science, Noda, Chiba, Japan) AJTEC2011-44542 Intertube Falling-Film Heat Transfer Behavior of Multiwall Carbon Nanotube Suspensions (MWCNT Nanofluids), Binglu Ruan (Tsinghua University/University of Illinois/Xi’an Jiaotong University, Beijing/Urbana/Xi’an, China), Anthony M Jacobi (University of Illinois, Urbana, IL, United States)
Room: Waikiki 3 10:40-12:00 Tuesday, March 15 1-1-4 Natural Convection - 1 Session Organizer: Alex da Silva (University of Texas at Austin, Austin, TX, United States) Session Co-Organizer: Yasuo Kawaguchi (Tokyo University of Science, Noda, Japan) AJTEC2011-44636 The Effects of Solid Thermal Conductivity and Volume-Fraction in the Natural Convection Inside a Heterogeneous Enclosure, Fernando C. De Lai, Admilson T. Franco, Silvio L. M. Junqueira (Federal Technological University of Parana, Curitiba, Paraná, Brazil), Jose L. Lage (Southern Methodist University, Dallas, TX, United States) AJTEC2011-44493 An Experimental Study of Heat Transfer From Small Horizontal Cylinders at Near-Critical Pressures, Yohann Rousselet (INSA Lyon, Lyon, Villeurbanne Cedex, France), Gopinath Warrier, Vijay K. Dhir (University of California, Los Angeles, Los Angeles, CA, United States) AJTEC2011-44507 27 Whole Field Temperature and Velocity Measurements for Two-Phase Flow Using PIV/LIF, Carlos E. Estrada-Perez (Texas A&M University, College Station, US Outlying Is), Sinchao Tan (Harbin Engineering University, Harbin, Heilongjiang, China), Yassin Hassan (Texas A&M University, College Station, TX, United States) AJTEC2011-44552 Laminar Natural Convection From Vertical Cylinders: a Revisit to a Classical Subject, Jerod C. Day, Matthew Traum, Sandra Boetcher (University of North Texas, Denton, TX, United States)
Room: Waikiki 3
13:40-15:00 Tuesday, March 15 Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 1-1-11 Natural Convection - 2 Session Organizer: Takashi Masuoka (Kyushu University, Fukuoka, Japan) AJTEC2011-44604 Natural Convection Heat Transfer of Concentric/Eccentric Annulus Subjected to Inner Tube of Constant Heat Flux, Reza Hosseini, Mahdi Alipour, Amir Gholaminejad (Amirkabir University of Technology, Tehran, Tehran, Iran) AJTEC2011-44411 Effect of Inner Pipe Rotation on Natural Convection Heat Transfer of Concentric Pipes, Reza Hosseini, Amir Gholaminejad, Mahdi Alipour (Amirkabir University of Technology, Tehran, Tehran, Iran) AJTEC2011-44409 Transport Process by Natural Convection and Molecular Diffusion of Two Component Gases in a Stratified Fluid Layer, Tetsuaki Takeda, Hirotaka Isomi, Hiroki Hanazawa (University of Yanamashi, Kofu, Yamanashi, Japan) AJTEC2011-44452 Scaling of Transient Natural Convection Cooling in a Side-Cooled Cavity - The Effect of Variable Viscosity, Obai Younis Taha Elamin (Taylors University College, Subang Jaya, Selangor, Malaysia), Feng Xu, Chengwang Lei, John Patterson (University of Sydney, Sydney, Australia), Jordi Pallares, Francesc Xavier Grau (Universitat Rovira i Virgili, Tarragona, Spain)
Room: Waikiki 3 15:20-16:40 Tuesday, March 15 1-1-5 Natural/Mixed Convection Session Organizer: Yaroslav Chudnovsky (Gas Technology Institute, Des Plaines, IL, United States) Session Co-Organizer: Tetsuaki Takeda (University of Yamanashi, Yamanashi, Japan) AJTEC2011-44191 Literature Review of Single Phase Internal Flow Heat Transfer Correlations in Straight Circular Conduits, Amanie Abdelmessih, Erik McGuire (Saint Martin’s University, Lacey, WA, United States) AJTEC2011-44174 An Experimental Study on Mixed Convection Heat Transfer for Thermally Developing Flow in Horizontal Ducts with Radiation Effects, Rajamohan Ganesan (Curtin University of Technology, Miri, Malaysia), Ramesh Narayanaswamy (Curtin University of Technology, Perth, Australia), Alexander Gorin, Kumar Perumal (Curtin University of Technology, Miri, Malaysia) AJTEC2011-44225 Natural Convection Heat Transfer in Vertical Fluid Layers of High Aspect Ratio, Takashi Masuoka (Kyushu University, Fukuoka, Japan), Yasushi Kakimoto (Shizuoka University, Hamamatsu, Japan), Hirokazu Ito, Koichi Inoue (University of Kitakyushu, Kitakyushu, Japan) AJTEC2011-44227 Numerical Study of Thermal Convection in Boussinesq Stokes Suspension Occupying a Rectangular Box, Manjunath Sreeramaiah, Chandrashekara Nazare Panduranga Rao (B.N.M. Institute of Technology, Bangalore, Karnataka, India)
28 Track 2: Combustion and Energy Systems Track Chair: Mamoru Tanahashi (Tokyo Institute of Technology, Tokyo, Japan) Track Co-Chair: S.A. Sherif (University of Florida, Gainesville, FL, United States) Track Co-Chair: Mohamed El-Genk (University of New Mexico, Albuquerque, United States)
Room: Kona Moku B 13:40-15:00 Tuesday, March 15 2-1-1 Heat and Mass Transfer in Turbulent Combustion I Session Organizer: Tatsuya Hasegawa (Nagoya University, Nagoya, Japan) Session Co-Organizer: Alex Brown (Sandia National Labs, Albuquerque, NM, United States) Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 AJTEC2011-44039 An Experimental Study on Properties of Local Burning Velocity for Hydrogen Added Hydrocarbon Premixed Turbulent Flames, Masaya Nakahara (Ehime University, Matsuyama, Japan), Jun Hashimoto (Tsuyama National College of Technology, Tsuyama, Japan), Atsushi Ishihara (Saitama Institute of Technology, Fukaya, Japan), Koich Murakami (Ehime University, Matuyama, Japan) AJTEC2011-44221 Study of Thermo-Diffusive Effects on Iso-Octane/Air Flames at Fixed Turbulence Karlovitz Number, Akihiro Hayakawa, Tomohiro Takeo, Yukito Miki, Yukihide Nagano, Toshiaki Kitagawa (Kyushu University, Fukuoka, Japan) AJTEC2011-44472 Flow-Geometry and Reynolds-Number Effects on Flame-Turbulence Interactions, Yuki Minamoto (Tokyo Institute of Technology, Tokyo, Japan), Yuzuru Nada (Toyohashi University of Technology, Aichi, Japan), Masayasu Shimura, Naoya Fukushima, Youngsam Shim, Mamoru Tanahashi, Toshio Miyauchi (Tokyo Institute of Technology, Tokyo, Japan) AJTEC2011-44587 Analysis of Thermocouple Responses to Turbulent Radiating Environments, OA Ezekoy, Craig Weinschenk (University of Texas at Austin, Austin, TX, United States)
Room: Kona Moku B 15:20-16:40 Tuesday, March 15 2-1-2 Heat and Mass Transfer in Turbulent Combustion II Session Organizer: Leiyong Jiang (NRCC, Ottawa, ON, Canada) Session Co-Organizer: Hideaki Kobayashi (Tohoku University, Sendai, Japan) AJTEC2011-44294 DNS Analysis on Local Burning Velocity and Flame Displacement Speed of Turbulent Premixed Flames with Different Density Ratio, Kazuya Tsuboi (Okayama University, Okayama, Japan), Tatsuya Hasegawa (Nagoya University, Nagoya, Japan) AJTEC2011-44479 Measurements of Fuel Concentration and Temperature Distributions in Lean Premixed Flame with Swirling Flow, Masaharu Komiyama, Kenichiro Takeishi, Kazumi Araki (Osaka University, Suita, Osaka, Japan) AJTEC2011-44441 Local Quenching Recovery Processes of Premixed and Diffusion Interacting Flames in a Turbulent Opposite Flow, Ikuyo Makino, Takayuki Kawanami (Tohoku University, Aoba-ku Sendai, Japan), Yuji Yahagi (Shibaura Institute of Technology, Tokyo, Japan) AJTEC2011-44585 Comparison of Accuracy and Computational Expense of Radiation Models in Simulation of Non-Premixed Turbulent Jet Flames, Gopalendu Pal (University of California, Merced, Merced, CA, United States), Ankur Gupta (The Pennsylvania State University, University Park, PA, United States), Michael Modest (University of California, Merced, Merced, CA, United States), Daniel C Haworth (The Pennsylvania State University, University Park, PA, United States)
29 Room: Kona Moku C 10:40-12:00 Tuesday, March 15 2-2-4 Heat and Mass Transfer in Combustion Systems IV - Coal and Biomass Combustion I - Session Organizer: Kris L Jorgensen (The Babcock & Wilcox Company, Barberton, OH, United States) Session Co-Organizer: Satoshi Kadowaki (Nagaoka University of Technology, Nagaoka, Niigata, Japan) AJTEC2011-44608 Parametric Studies on PCI Performances, Dong Fu, Chenn Zhou, Dezhi Zheng (Purdue University Calumet, Hammond, IN, United States), Kyle Ferron (United States Steel Canada, Hamilton, ON, Canada), Yongfu Zhao (United States Steel, Munhall, PA, United States), John D’Alessio (United States Steel
Canada, Hamilton, ON, Canada) Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 AJTEC2011-44180 Deveropment of Advanced Combustor for Biomass, Masato Urashima, Shuichii Torii (Kumamoto University, Kumamoto, Japan) AJTEC2011-44093 Fluidised Bed Combustion of Blends of Coal and Pressed Sugar Beet Pulp, John Ward, Muhammad Akram, Roy Garwood (University of Glamorgan, Pontypridd, Wales, United Kingdom)
Room: Kona Moku C 13:40-15:00 Tuesday, March 15 2-2-5 Heat and Mass Transfer in Combustion Systems V - Coal and Biomass Combustion II - Session Organizer: Chenn Zhou (Purdue University Calumet, Hammond, IN, United States) Session Co-Organizer: Fumiteru Akamatsu (Osaka University, Suita, Osaka, Japan) AJTEC2011-44205 Detecting Burner Instabilities Using Joint-Time Frequency Methods Whilst Co-Firing Coal and Biomass, Palani Valliappan, Shee Meng Thai, Steven Wilcox, John Ward (University of Glamorgan, Pontypridd, Wales, United Kingdom), Chee K Tan (University of Glamorgan, Rhondda Cynon Taff, Wales, United Kingdom), Krzysztof Jagiello (Institue of Power Engineering, Warsaw, Poland) AJTEC2011-44182 Reburning of Cattle Manure-Based Biomass with Coals in a Small Scale Boiler Burner Facility for NOx and Hg Reductions, Hyukjin Oh (Research Institute of Industrial Science & Technology, Pohang, Korea (Republic)), Kalyan Annamalai (Texas A&M University, College Station, TX, United States), John Sweeten (Texas A&M University, Amarillo, TX, United States) AJTEC2011-44522 The Characteristics of Recycled-NO Reduction in O2/CO2 Coal Combustion, Takashi Marumo, Jun-ichiro Yamamoto, Hirotatsu Watanabe, Ken Okazaki (Tokyo Institute of Technology, Tokyo, Japan) AJTEC2011-44279 NO Reduction Mechanism Peculiar to O2/CO2 Coal Combustion Characterized by High CO2 Concentration, Hirotatsu Watanabe, Takashi Marumo, Jun-ichiro Yamamoto, Ken Okazaki (Tokyo Institute of Technology, Tokyo, Japan)
Room: Kona Moku C 15:20-16:40 Tuesday, March 15 2-2-6 Heat and Mass Transfer in Combustion Systems VI - Biomass and Waste Combustion - Session Organizer: Kaoru Maruta (Tohoku University, Sendai, Japan) Session Co-Organizer: Kris L Jorgensen (The Babcock & Wilcox Company, Barberton, OH, United States) AJTEC2011-44145 Combustion of Bio-Coke (Highly Densified Biomass Fuel) Block in High-Temperature Air Flow, Hiroyuki Ito, Yuto Sakai (Hokkaido University, Sapporo, Japan), Tamio Ida (Kinki University, Higashi-Osaka, Japan), Yuji Nakamura, Osamu Fujita (Hokkaido University, Sapporo, Hokkaido, Japan) AJTEC2011-44436 Effects of Heterogeneous Reaction and Slow/Rapid Volatilization Process on N2O Formation During the Combustion of Pulverized Biomass, Yukihiko Okumura (Maizuru National College of Technology, Maizuru, Kyoto, Japan), Hirotatsu Watanabe, Ken Okazaki (Tokyo Institute of Technology, Tokyo, Japan) 30 AJTEC2011-44159 Decomposition of Toluene as a Biomass Tar Through Partial Combustion, Noriaki Nakatsuka, Yasushi Imoto, Jun Hayashi (Osaka University, Suita, Osaka, Japan) Miki Taniguchi, Kenichi Sasauchi (Chugai-Ro, Osaka, Japan), Mayumi Matsuda (J-Science Lab, Kyoto, Japan), Fumiteru Akamatsu (Osaka University, Suita, Osaka, Japan) AJTEC2011-44242 Numerical Optimization of Waste to Energy Plant at Different Operating Conditions, Niko Samec, Miran Kapitler, Filip Kokalj (University of Maribor, Faculty of Mechanical Engineering, Maribor, Slovenia)
Room: Milo III Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 10:40-12:00 Tuesday, March 15 2-4-5 Heat and Mass Transfer in Energy Devices V - Solar Energy 1 (Photovoltaic Cells) - Session Organizer: Kohei Ito (Kyushu University, Fukuoka, Japan) Session Co-Organizer: Julie Asfia (Boeing Company, Huntington Beach, CA, United States) AJTEC2011-44513 Photovoltaic Generation of Electricity Using Near-Field Radiation, Katsunori Hanamura, Hirofumi Fukai, Elaiyaraju Srinivasan, Masao Asano, Teppei Masuhara (Tokyo Institute of Technology, Tokyo, Japan) AJTEC2011-44132 Band-Gap Tuned Direct Absorption for Hybrid Concentrating Solar Photovoltaic/Thermal System, Todd Otanicar (Loyola Marymount University, Los Angeles, CA, United States), Ihtesham Chowdhury, Patrick Phelan, Ravi Prasher (Arizona State University, Tempe, AZ, United States) AJTEC2011-44580 Design Parameters for High-Efficiency Hybrid PV/Thermal Solar Energy Systems, Hamid Hadim, Jerry Dutreuil (Stevens Institute of Technology, Hoboken, NJ, United States) AJTEC2011-44349 Fabrication of a Dye Sensitized Solar Cell and Its Performance Dependence on Temperature and Irradiance, Edwin Peng, Halil Berberoglu (The University of Texas at Austin, Austin, TX, United States)
Room: Milo III 13:40-15:00 Tuesday, March 15 2-4-6 Heat and Mass Transfer in Energy Devices VI - Solar Energy 2 (Thermal Utilization & Reactor) - Session Organizer: Sandip Mazumder (Ohio State University, Columbus, OH, United States) Session Co-Organizer: Katsunori Hanamura (Tokyo Institute of Technology, Tokyo, Japan) AJTEC2011-44354 An Exergy-Based Metric for Evaluating Solar Thermal Absorber Technologies for Gas Heating, Maritza Ruiz, Van Carey (University of California, Berkeley, CA, United States) AJTEC2011-44328 Simulation on Solar Energy Collection to Power a Thermoacoustic Prime Mover Using Pressurized Hot Steam, Ikhsan Setiawan, Makoto Nohtomi (Waseda University, Saitama, Japan), Masafumi Katsuta (Waseda University, Tokyo, Japan) AJTEC2011-44381 Characterization of Activated Carbon for Carbon Laden Flows in a Solar Reactor, Nesrin Ozalp, Vidyasagar Shilapuram (Texas A&M University at Qatar, Doha, Qatar) AJTEC2011-44387 Simulation of Solar Thermochemical Hydrogen Production Techniques, Mohamed Almodaris, Sara Khorasani, Jocin James Abraham, Nesrin Ozalp (Texas A&M University at Qatar, Doha, Qatar)
Room: Milo III 15:20-16:40 Tuesday, March 15 2-4-3 Heat and Mass Transfer in Energy Devices III - Energy Storage & Utilization - Session Organizer: Julie Asfia (Boeing Company, Huntington Beach, CA, United States) Session Co-Organizer: Kosuke Nishida (Kyoto Institute of Technology, Kyoto, Japan) AJTEC2011-44146 31 Design Concept and the Performance of a Metal Hydride Hydrogen Storage Tank in Totalized Hydrogen Energy Utilization System, Tetsuhiko Maeda (National Institute of Advanced Industrial Science and Technology, Tsukuba, Ibaraki, Japan), Keiichi Nishida, Shiro Yamazaki (Tokyo Institute of Technology, Yokohama, Japan), Yoshiaki Kawakami, Masao Masuda (Takasago Thermal Engineering Co. Ltd., Atsugi, Kanagawa, Japan), Manabu Tange (Shibaura Institute of Technology, Tokyo, Japan), Yasuo Hasegawa, Hiroshi Ito, Akihiro Nakano (National Institute of Advanced Industrial Science and Technology, Tsukuba, Ibaraki, Japan) AJTEC2011-44148 The Actual Operation of Multiple Metal Hydride Hydrogen Storage Tanks in Totalized Hydrogen Energy
Utilization System, Yoshiaki Kawakami, Masao Masuda (Takasago Thermal Engineering Co. Ltd., Atsugi, Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Kanagawa, Japan), Tetsuhiko Maeda, Akihiro Nakano (National Institute of Advanced Industrial Science and Technology, Tsukuba, Ibaraki, Japan), Manabu Tange (Shibaura Institute of Technology, Tokyo, Japan), Atsushi Takahashi (Takasago Thermal Engineering Co. Ltd., Atsugi, Kanagawa, Japan), Masakazu Shoji, Hideyuki Aoki, Takatoshi Miura (Tohoku University, Sendai, Japan) AJTEC2011-44630 Influence of Surface Emissivity and of Low Emissivity Shields on the Thermal Properties of Low Density Insulating Materials, Manuela Campanale, Lorenzo Moro (Universita Degli Studi Di Padova, Padova, Italy), Mariacarla Arduini Schuster (Zae Bayer, Wurzburg, Germany) AJTEC2011-44592 Heat Transfer Effects on Dynamic Pressure Response of Pneumatic Vacuum Circuit, Zhonghua Guo, Xiaoning Li (Nanjing University of Science and Technology, Nanjing, China), Toshiharu Kagawa (Tokyo Institute of Technology, Yokohama, Japan)
Track 3: Micro/Nano Scale Phenomena Track Chair: Shigeo Maruyama (The University of Tokyo, Tokyo, Japan) Track Co-Chair: Taku Ohara (Tohoku University, Sendai, Japan) Track Co-Chair: Leslie Phinney (Sandia National Laboratories, Albuquerque, NM, United States) Track Co-Chair: Alexis Abramson (Case Western Reserve University, Cleveland, OH, United States)
Room: Kona Moku A 10:40-12:00 Tuesday, March 15 3-2-4 Phase Transition and Fluid Structure in Nanoscale Energy Systems Session Organizer: Yoav Peles (R.P.I, Troy, NY, United States) Session Co-Organizer: Takashi Tokumasu (Institute of Fluid Science, Tohoku University, Sendai, Japan) AJTEC2011-44407 Molecular Dynamics Simulation of Three-Dimensional Heterogeneous Nucleation, Donguk Suh, Kenji Yasuoka (Keio University, Yokohama, Japan) AJTEC2011-44457 Multicanonical Molecular Dynamics Simulation Study of the Liquid-Solid and Solid-Solid Transitions in Lennard-Jonse Clusters, Toshihiro Kaneko, Kenji Yasuoka, Ayori Mitsutake (Keio University, Yokohama, Japan), Xiao Cheng Zeng (University of Nebraska - Lincoln, Lincoln, NE, United States) AJTEC2011-44602 Cutoff Radius Effect of Water Configuration Using the Wolf Method, Kazuaki Takahashi (Keio University, Yokohama, Japan), Tetsu Narumi (University of Electro-Communications, Tokyo, Japan), Kenji Yasuoka (Keio University, Yokohama, Kanagawa, Japan) AJTEC2011-44609 Molecular Dynamics Simulation of Quasi-Two-Dimensional Water Network on Ice Nucleation Protein, Daisuke Murakami, Kenji Yasuoka (Keio University, Yokohama, Japan)
Room: Kona Moku A 13:40-15:00 Tuesday, March 15 3-2-5 Interfacial Transport Phenomena in Energy Systems 32 Session Organizer: Kenji Yasuoka (Keio University, Yokohama, Japan) Session Co-Organizer: Patrick Hopkins (Sandia National Labs, Albuquerque, NM, United States) AJTEC2011-44373 Interfacial Thermal Resistance Between a Carbon Nanoparticle and Molten Salt Eutectic: Effect of Material Properties, Particle Shapes and Sizes, Byeongnam Jo, Debjyoti Banerjee (Texas A&M University, College Station, TX, United States) AJTEC2011-44474 Molecular Analysis on the Dynamic Properties of Water Droplet at Solid-Liquid Interface Based on MD Simulations, Yasutaka Yamaguchi, Donatas Surblys, Satoshi Nakaoka (Osaka University, Suita, Osaka,
Japan), Koji Kuroda, Tadashi Nakajima, Hideo Fujimura (Dai Nippon Printing Co., Ltd., Tsukuba, Ibaraki, Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Japan) AJTEC2011-44220 Effects of the Nanostructural Geometry at a Liquid-Solid Interface on the Interfacial Thermal Resistance and the Liquid Molecular Non-Equilibrium Behaviors, Masahiko Shibahara (Osaka University, Osaka, Japan), Taku Ohara (Tohoku University, Sendai, Miyagi, Japan)
Room: Kona Moku A 15:20-16:40 Tuesday, March 15 3-2-6 Nanofluids and Nanoparticles in Energy Systems Session Organizer: Avijit Bhunia (Teledyne Scientific, Thousand Oaks, CA, United States) Session Co-Organizer: Masahiko Shibahara (Osaka University, Osaka, Japan) AJTEC2011-44448 Characterization and Convective Heat Transfer with Nanofluids, Yijun Yang, Alp Oztekin (Lehigh University, Bethlehem, PA, United States), Satish Mohapatra (Dynalene, Inc., Whitehall, PA, United States), Sudhakar Neti (Lehigh University, Bethlehem, PA, United States) AJTEC2011-44453 Effect of Nano-Cluster Compactness on Thermal Physical Properties of Nanofluids, Zhaozan Feng, Wei Li, Tingting Wu (Zhejiang University, Hangzhou, China) AJTEC2011-44124 Nanofluid Extinction Coefficients for Photothermal Energy Conversion, Robert Taylor, Patrick Phelan, Ronald Adrian, Ravi Prasher (Arizona State University, Tempe, AZ, United States), Todd Otanicar (Loyola Marymount University, Los Angeles, CA, United States) AJTEC2011-44170 Enhancing the Heat Transfer in Energy Systems From a Volumetric Approach, Todd Otanicar (Loyola Marymount University, Los Angeles, CA, United States)
Room: Kona Moku B 10:40-12:00 Tuesday, March 15 3-1-6 Design and Control of Thermal Transport Session Organizer: Vikas Tomar (Purdue University, West Lafayette, IN, United States) Session Co-Organizer: Yasutaka Yamaguchi (Osaka University, Suita, Osaka, Japan) AJTEC2011-44071 Defect-Induced Thermal Rectification: Numerical Study on Carbon Nanotube and FPU-beta Lattice, Hiroyuki Hayashi, Koji Takahashi (Kyushu University, Fukuoka, Japan) AJTEC2011-44136 Tunable Thermal Conductivity of TiO2 Films of Close-Packed Nanoparticles, Patrick Hopkins (Sandia National Laboratories, Albuquerque, NM, United States), Manish Mittal (University of Delaware, Newark, DE, United States), Leslie Phinney, Anne M. Grillet (Sandia National Laboratories, Albuquerque, NM, United States), Eric M. Furst (University of Delaware, Newark, DE, United States) AJTEC2011-44521 Thermal Rectification in Graphene and Carbon Nanotube Systems Using Molecular Dynamics Simulations, Ajit Vallabhaneni, Jiuning Hu, Yong P Chen, Xiulin Ruan (Purdue University, Lafayette, IN, United States) 33
Room: Milo IV&V 10:40-12:00 Tuesday, March 15 3-3-4 Interfacial Phenomena and Thermal Properties - 1 Session Organizer: Ingrid Cotoros (Lockheed Martin, Advanced Technology Center, Palo Alto, CA, United States) Session Co-Organizer: Gota Kikugawa (Tohoku University, Sendai, Japan) AJTEC2011-44496 Sensing Changes of Surface Properties of Oxygen Nano-Bubbles in Water by the Ripplon Surface Laser-Light Scattering, Yuma Ichikawa, Yu Nishimura, Yuji Nagasaka (Keio University, Yokohama,
Japan) Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 AJTEC2011-44070 Micro-Patterned Substrates with Nano-Scale Elements for Pool Boiling, Chad Hunter (Air Force Research Laboratory, Materials and Manufacturing Directorate, WPAFB, OH, United States), Nicholas R. Glavin (Air Force Research Laboratory, Materials and Manufacturing Directorate, Dayton, OH, United States), S.A. Putnam, A.N. Khramov (University Technology Corporation, Dayton, OH, United States), C. Muratore (Air Force Research Laboratory, Materials and Manufacturing Directorate, Wright-Patterson AFB, OH, United States), T.S. Fisher (Birck Nanotechnology Center, West Lafayette, IN, United States), J.G. Jones (Air Force Research Laboratory, Materials and Manufacturing Directorate, Wright-Patterson AFB, OH, United States), Calvin Hong Li (Villanova University, Villanova, PA, United States) AJTEC2011-44447 Molecular Dynamics Simulations and Kaptiza Conductance Prediction of Si/Au Systems Using the New Full 2 nn Meam Si/Au Cross-Potential, Carolina Abs da Cruz (Centre de Thermique de Lyon CETHIL UMR5008, Université de Lyon, INSA de Lyon, CNRS,Université Lyon1, Villeurbanne, France), Patrice Chantrenne (Centre de Thermique de Lyon CETHIL UMR5008, Villeurbanne, France), Xavier Kleber (CETHIL UMR5008, Université de Lyon, INSA de Lyon, CNRS,Université Lyon1, Villeurbanne, France) AJTEC2011-44657 Modeling Grain Boundary Scattering and Thermal Conductivity of Polysilicon Using an Effective Medium Approach, Timothy S. English, Justin L. Smoyer, John C. Duda, Pamela Norris (University of Virginia, Charlottesville, VA, United States), Thomas E. Beechem, Patrick Hopkins (Sandia National Laboratories, Albuquerque, NM, United States)
Room: Milo IV&V 13:40-15:00 Tuesday, March 15 3-3-5 Interfacial Phenomena and Thermal Properties - 2 Session Organizer: Alan McGaughey (Carnegie Mellon University, Pittsburgh, PA, United States) Session Co-Organizer: Koji Takahashi (Kyushu University, Fukuoka, Japan) AJTEC2011-44169 Development of a High Performance Thermal Interface Material With Vertically Aligned Graphite Platelets, Yuan Zhao, Dennis R Strauss, Tony Liao (Teledyne Scientific & Imaging, Thousand Oaks, CA, United States), Ya-chi Chen, Chung-Lung Chen (Teledyne Scientific, Thousand Oaks, CA, United States) AJTEC2011-44135 Contributions of Anharmonic Phonon Interactions to Thermal Boundary Conductance, Patrick Hopkins (Sandia National Laboratories, Albuquerque, NM, United States), John C. Duda, Pamela Norris (University of Virginia, Charlottesville, VA, United States) AJTEC2011-44333 Thermal Boundary Conductance Between Thin Metal Films and Graphite Substrates, Justin L. Smoyer (University of Virginia, Charlottesville, VA, United States), John C. Duda, Pamela Norris, Arthur W. Lichtenberger (University of Virginia, Charlottesville, VA, United States)
Room: Milo IV&V 15:20-16:40 Tuesday, March 15 3-3-10 Nanofluids and Microchannels Session Organizer: Qingjun (Steve) Cai (Teledyne Scientific Company, Thousand Oaks, CA, United States) 34 Session Co-Organizer: Mitsuhiro Matsumoto (Kyoto University, Kyoto, Japan) AJTEC2011-44310 Laminar Mixed Convection Nanofluids Flow in a Elliptic Duct Using Two Phase Approach, Alireza Akbarinia (Institute for Electromagnetic Theory and Microelectronics, University of Bremen, Bremen, Germany), Mohammad Shariat (University of Sistan and Baluchestan, Zahedan, Iran), Rainer Laur (Institute for Electromagnetic Theory and Microelectronics, University of Bremen, Bremen, Germany) AJTEC2011-44213 The Impact of Converging and Diverging Angle on the X-Shaped Micro-Channels, Tu Shu-Min, Shuichii Torii (Kumamoto University, Kumamoto, Japan), Yang-Cheng Shih (National Taipei University of
Technology, Taipei, Taiwan) Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 AJTEC2011-44088 Characterization of Hybrid-Wicked Copper Heat Pipe, Chen Li, Xianming Dai (University of South Carolina, Columbia, SC, United States), Levey T. Tran (University of Colorado, Boulder, CO, United States), Fanghao Yang (University of South Carolina, Mechanical Eng., Columbia, SC, United States), Ronggui Yang, YC Lee (University of Colorado, Boulder, CO, United States), Bo Shi (University of Nanjing Science and Technology, Nanjing, Jiangsu, China)
35
Wednesday, March 16
Track 4: Keynote Lectures Track Chair: Kenji Yasuoka (Keio University, Yokohama, Kanagawa, Japan) Track Co-Chair: James Klausner (Univesity of Florida, Gainesville, FL, United States)
Room: Kona Moku Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 9:00-9:40, Wednesday, March 16 4-1-5 Keynote - 5 Session Organizer: Isao Satoh (Tokyo Institute of Technology, Tokyo, Japan) AJTEC2011-44611 Significance of Micro-Scall Mass Transport Phenomena on Fuel Cells and CO2 Sequestration, Shuichiro Hirai, Shohji Tsushima, Suguru Uemura (Tokyo Institute of Technology, Tokyo, Japan)
Room: Kona Moku 9:40-10:20, Wednesday, March 16 4-1-6 Keynote - 6 Session Organizer: Joerg Petrasch (University of Florida, Gainesville, FL, United States) AJTEC2011-44581 Solar Thermal Fuel Production, Christian Sattler (German Aerospace Center, Cologne, Koln, Germany), Hans Muller-Steinhagen (Technical University of Dresden, Dresden, Germany), Martin Roeb, Dennis Thomey, Martina Neises (German Aerospace Center, Cologne, Koln, Germany)
Track 1: Fundamentals of Heat and Mass Transfer Track Chair: Kazuyoshi Nakabe (Kyoto University, Kyoto, Kyoto, Japan) Track Co-Chair: Raj M. Manglik (University of Cincinnati, Cincinnati, OH, United States) Track Co-Chair: Chang Oh (Idaho National Laboratory, Idaho Falls, ID, United States)
Room: Honolulu 10:40-12:00, Wednesday, March 16 1-4-3 Droplets and Sprays Session Organizer: Yoshimichi Hagiwara (Kyoto Institute of Technology, Kyoto, Japan) Session Co-Organizer: Panneer Selvam (University of Arkansas, Fayetteville, AR, United States) AJTEC2011-44044 Numerical Analysis of Microdroplet Impact and Evaporation on a Solid Surface, Gihun Son (Sogang University, Seoul, Korea (Republic)) AJTEC2011-44158 Coupling of Hydrodynamics, Vaporization and Reaction with Liquid Spray Injection into a High-Temperature Gas-Solid Reactor, Dawei Wang, Rajesh Patel, Chao Zhu (New Jersey Institute of Technology, Newark, NJ, United States), Teh C. Ho (Corporate Strategic Research Laboratories, Annandale, NJ, United States) AJTEC2011-44331 Spray Cooling Heat Transfer Enhancement and Degradation Using Fractal-Like Micro-Structured Surfaces, Alex Tulchinsky, Deborah Pence, James Liburdy (Oregon State University, Corvallis, OR, United States)
Room: Honolulu 13:40-15:00, Wednesday, March 16 1-4-1 Two-Phase Flow Phenomena in General - 1 36 Session Organizer: John Crepeau (University of Idaho, Moscow, ID, United States) Session Co-Organizer: Masahiro Kawaji (City College of New York, New York, NY, United States) AJTEC2011-44625 Interaction Between Two Falling Droplets in the Liquid-Liquid Two Phase Flow, Nao Ninomiya, Takeshi Mori (Utsunomiya University, Utsunomiya, Tochigi, Japan) AJTEC2011-44406 The Effect of Fine Particles Added into Water on the Motion of Bubbles Rising Helically, Hisato Minagawa, Takahiro Yasuda (The University of Shiga Prefecture, Hikone, Shiga, Japan) AJTEC2011-44089
Mass Transfer from a Bubble in a Vertical Pipe, Shogo Hosoda, Ryosuke Sakata, Kosuke Hayashi, Akio Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Tomiyama (Kobe University, Kobe, Japan)
Room: Honolulu 15:20-16:40, Wednesday, March 16 1-4-5 Two-Phase Flow Phenomena in General - 2 Session Organizer: Masahiro Kawaji (City College of New York, New York, NY, United States) Session Co-Organizer: John Crepeau (University of Idaho, Moscow, ID, United States) AJTEC2011-44546 Characteristics of Air-Oil Slug Flow in Inclined Pipe Using Tomographic Techniques, Lokman Abdulkareem, B.J. Azzopardi, Sharaf Safa, Valente Hernandez-perez (University of Nottingham, Nottingham, United Kingdom) AJTEC2011-44114 A Mechanistic Heat Transfer Correlation for Non-Boiling Two-Phase Flow in Horizontal, Inclined and Vertical Pipes, Clement C. Tang, Afshin J. Ghajar (Oklahoma State University, Stillwater, OK, United States) AJTEC2011-44606 Experimental Investigation of Two-Phase Flow in a Multi-Branch Reduced T-Junction with Co-Current Stratified Gas-Liquid Flow, Robert Bowden, Ibrahim Hassan (Concordia University, Montreal, QC, Canada)
Room: Honolulu 17:00-18:20, Wednesday, March 16 1-4-6 Two-Phase Flow Phenomena in General - 3 Session Organizer: Weilin Qu (University of Hawaii at Manoa, Honolulu, HI, United States) Session Co-Organizer: Yoshimichi Hagiwara (Kyoto Institute of Technology, Kyoto, Japan) AJTEC2011-44187 Rewetting Processes During Top/Bottom Re-Flooding of Heated Vertical Surfaces, Muhammad Ilyas, Masroor Ahmad, Colin Hale, Simon P Walker, Geoffrey F Hewitt (Imperial College London, London, United Kingdom) AJTEC2011-44028 Optimization of the Relationship Between the Two-Phase Friction Factor and Reynolds Equivalent Number Model by Means of Genetic Algorithm, Berna Bolat, Muhammet Balcilar, Ahmet Selim Dalkilic (Yildiz Technical University, Istanbul, Turkey), Somchai Wongwises (King Mongkut's University of Technology Thonburi, Bangkok, Thailand) AJTEC2011-44573 Thermal Fluctuations and Heat Transfer Measurements in a Externally Heated Rotary Cylinder, Koteswara Rao Sunkara, Fabian Herz, Eckehard Specht (Otto von Guericke University Magdeburg, Magdeburg, Saxony Anhalt, Germany)
Room: Kou 10:40-12:00, Wednesday, March 16 1-7-1 Heat and Mass Transfer in Micro-Scale Systems - 1 Session Organizer: Debjyoti Banerjee (Texas A&M University, College Station, TX, United States) 37 Session Co-Organizer: Yuji Suzuki (The University of Tokyo, Tokyo, Japan) AJTEC2011-44356 Liquid Supply and Heat Transfer Performance of Sintered Cu Monolayer Wicks for Phase Change Heat Transfer Applications, Stephen Sharratt (UCLA - MAE Department, Los Angeles, CA, United States), Youngsuk Nam (Massachusetts Institute of Technology, Cambridge, MA, United States), Y. Sungtaek Ju (UCLA - MAE Department, Los Angeles, CA, United States) AJTEC2011-44056 Charging Station of a Planar Miniature Thermal Ground Plane, Mohammed Ababneh, Frank Gerner, Doug Hurd (University of Cincinnati, Cincinnati, OH, United States), Peter de Bock, Shakti Chauhan, Tao
Deng (GE Global Research Center, Niskayuna, NY, United States) Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 AJTEC2011-44654 Development of a Compact Micro Pulsating Heat Pipe, Young Jik Youn, Sung Jin Kim (Korea Advanced Institute of Science and Technology, Daejeon, Yuseong-gu, Korea (Republic))
Room: Kou 13:40-15:00, Wednesday, March 16 1-7-2 Heat and Mass Transfer in Micro-Scale Systems - 2 Session Organizer: Vinod Narayanan (Oregon State University, Corvallis, OR, United States) Session Co-Organizer: Yasuo Kawaguchi (Tokyo University of Science, Noda, Japan) AJTEC2011-44038 A Microstructure Device for Single Phase Surface Cooling, Juergen J. Brandner, Stefan Maikowske, Natrah Kamaruzaman (Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany) AJTEC2011-44113 Analysis of Laminar Slip-Flow Thermal Transport in Microchannels with Transverse Rib and Cavity Structured Superhydrophobic Walls at Constant Heat Flux, Daniel Maynes, Brent Webb, Vladimir Soloviev (Brigham Young University, Provo, UT, United States) AJTEC2011-44631 Fluid Flow Characteristics in Microchannels with Rib-Patterned Surface, Toru Yamada (The University of Rhode Island, Kingston, RI, United States), Chungpyo Hong (Tokyo Univeristy of Science, Chiba, Japan), Otto Gregory, Mohammad Faghri (The University of Rhode Island, Kingston, RI, United States) AJTEC2011-44583 Experimental Study and Numerical Analysis of Water Single-Phase Pressure Drop Across an Array of Circular Micro-Pin-Fins, Jonathan R. Mita, Weilin Qu, Marcelo H. Kobayashi (University of Hawaii at Manoa, Honolulu, HI, United States), Frank E. Pfefferkorn (University of Wisconsin-Madison, Wisconsin, WI, United States)
Room: Kou 15:20-16:40, Wednesday, March 16 1-7-3 Heat and Mass Transfer in Micro-Scale Systems - 3 Session Organizer: Naoki Shikazono (The University of Tokyo, Tokyo, Japan) Session Co-Organizer: Deborah Pence (Oregon State University, Corvallis, OR, United States) AJTEC2011-44655 The Effect of Channel Diameter on Heat Transfer Characteristics of Two-Phase Flow in Microchannels, Kyosung Choo, Daniel Trainer, Sung Jin Kim (Korea Advanced Institute of Science and Technology, Daejeon, Yuseong-gu, Korea (Republic)) AJTEC2011-44551 Heat Transfer and Pressure Drop During Condensation of R-134a Inside Parallel Microchannels, Gil Goss Jr., Stefano Frasson Macarini, Júlio César Passos (Federal University of Santa Catarina, Florianópolis, Brazil) AJTEC2011-44079 Flow Boiling Heat Transfer of Ternary Mixture in a Micro-Channel, Inmyong Park (Korea Advanced Institute of Science and Technology, Daejeon, Yuseong-gu, Korea (Republic)), Sehwan In (Samsung Heavy Industries Co., Ltd., Geoje, Gyeongsangnam Do, Korea (Republic)), Sangkwon Jeong (Korea 38 Advanced Institute of Science and Technology, Daejeon, Yuseong-gu, Korea (Republic)) AJTEC2011-44176 An Experimental Study on Thermal Hydraulic Characteristics of a Steam Condensation Flow in a Circular Microtube, Koji Iiyama, Akiko Kaneko, Yutaka Abe, Shingo Asaba (University of Tsukuba, Tsukuba, Japan), Yutaka Suzuki (Welcon, Co. Ltd., Niigata, Japan)
Room: Kou 17:00-18:20, Wednesday, March 16 1-7-4 Heat and Mass Transfer in Micro-Scale Systems - 4
Session Organizer: Nao Ninomiya (Utsunomiya University, Utsunomiya, Japan) Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Session Co-Organizer: Chang Oh (Idaho National Laboratory, Idaho Falls, ID, United States) AJTEC2011-44374 Experimental Study of Thermal Performance of Nanofluids During Flow in Microchannels Using Surface Temperature-Nano-Sensors, Seokwon Kang, Saeil Jeon, Debjyoti Banerjee (Texas A&M University, College Station, TX, United States) AJTEC2011-44353 Constrained Optimization of One-Dimensional Two-Phase Flow in Fractal-Like Branching Microchannel Heat Sinks, Douglas Heymann, Deborah Pence (Oregon State University, Corvallis, OR, United States) AJTEC2011-44563 Effect of 1D Cu Nanostructures on Heat Transfer Characteristics of Single Phase Microchannel Heat Sink, Muhammad Yakut Ali, Fanghao Yang, Ruixian Fang, Chen Li, Jamil Khan (University of South Carolina, Columbia, SC, United States) AJTEC2011-44490 Impact of Surface Microstructures on Liquid Micro-Jet Array Impingement Cooling: Comparison Between Single Phase and Phase Change Heat Transfer, Avijit Bhunia, Ya-chi Chen, Chung-Lung Chen (Teledyne Scientific Company, Thousand Oaks, CA, United States)
Room: Waikiki 1 10:40-12:00, Wednesday, March 16 1-3-7 Two-Phase Flow and Heat Transfer - 1 Session Organizer: Hideo Yoshida (Kyoto University, Kyoto, Japan) Session Co-Organizer: Frederick Best (Texas A&M University, College Station, TX, United States) AJTEC2011-44118 Flow Boiling Characteristics for R1234ze in 1.0 and 2.2 mm Circular Channels, Cristiano B. Tibiriçá, Gherhardt Ribatski (University of Sao Paulo, São Carlos, Sao Paulo, Brazil), John R. Thome (Ecole Polytechnique Fédérale de Lausanne, Lausanne, Vaud, Switzerland) AJTEC2011-44026 Convective Boiling Heat Transfer Enhancement by Microgrooves in Plate Evaporator, Hirofumi Arima, Nobuhiko Matsuo, Keita Shigyou (Saga University, Saga, Japan), Akio Okamoto (Kobe Steel, Ltd., Tokyo, Japan), Yasuyuki Ikegami (Saga University, Saga, Japan) AJTEC2011-44289 Study on Flow and Heat Transfer Characteristics of Tetra-n-Butyl Ammonium Bromide Hydrate Slurry, Hiroyuki Kumano, Tetsuo Hirata, Yuki Kobayashi (Shinshu University, Nagano, Japan), Tomoya Kudoh (Aishin Seiki Co., LTD., Aichi, Japan) AJTEC2011-44116 Efficient Heat Transfer by Phase Transition in Microstructured Devices, Stefan Maikowske, Juergen J. Brandner, Roland Dittmeyer (Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)
Room: Waikiki 1 13:40-15:00, Wednesday, March 16 1-3-13 Two-Phase Flow and Heat Transfer - 2 Session Organizer: Tailian Chen (Gonzaga University, Spokane, WA, United States) Session Co-Organizer: Satoru Momoki (Nagasaki University, Nagasaki, Japan) 39 AJTEC2011-44083 A Study of Critical Heat Flux During Flow Boiling in Microchannel Heat Sinks, Tailian Chen (Gonzaga University, Spokane, WA, United States), Suresh V. Garimella (Purdue University, West Lafayette, IN, United States) AJTEC2011-44292 Flow Instability and Critical Heat Flux for Flow Boiling of Water in a Vertical Annulus at Low Pressure, Christoph Haas, Leonhard Meyer, Thomas Schulenberg (Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Baden-Württemberg, Germany) AJTEC2011-44661
Characterization of a Dual Chambered Two Phase Separator, Frederick Best, Cable Kurwitz, Casey Klein Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 (Texas A&M University, College Station, TX, United States) AJTEC2011-44514 Experimental and Numerical Study on Growth of Single Vapor Bubble in Upward Flow Through Vertical Mini-Tube, Hiroshi Iwai, Motohiro Saito, Yuichi Kami, Yasuhiro Niina, Hideo Yoshida (Kyoto University, Kyoto, Japan)
Room: Waikiki 1 15:20-16:40, Wednesday, March 16 1-3-14 Evaporation of Liquid Film and Impinging Droplets - 1 Session Organizer: Takaharu Tsuruta (Kyushu Institute of Technology, Kitakyushu, Japan) Session Co-Organizer: Jorge Alvarado (Texas A&M, College Station, TX, United States) AJTEC2011-44501 Falling Water Film Evaporation on Horizontal Finned Tube Arrays at Low Pressure, Xiao-Yu Wu, Wei Li (Zhejiang University, Hangzhou, Zhejiang Province, China), Zhong Luo (Wolverine Tube (Shanghai) Co. Ltd, Shanghai, China) AJTEC2011-44597 Multi-Nozzle Spray Cooling in a Closed Loop, Quinn Leland (Air Force Research Laboratory, WPAFB, OH, United States), Lanchao Lin (University of Dayton Research Institute, Dayton, OH, United States) AJTEC2011-44533 Measurements of Rewetting Temperatures of Hot Dry Surface in Saturated and Subcooled Film Boiling, Hiroyasu Ohtake, Nozomi Nagashima (Kogakuin University, Tokyo, Japan), Yasuo Koizumi (Shinshu University, Ueda, Nagano, Japan) AJTEC2011-44211 Effect of Cooling Water Temperature on Impinging Jet Heat Transfer on Hot Steel Plate, Jungho Lee, Cheong-Hwan Yu, Kyu Hyung Do (Korea Institute of Machinery and Materials, Deajeon, Korea (Republic))
Room: Waikiki 1 17:00-18:20, Wednesday, March 16 1-3-15 Evaporation of Liquid Film and Impinging Droplets - 2 Session Organizer: Naoki Shikazono (The University of Tokyo, Tokyo, Japan) Session Co-Organizer: Joel Plawsky (Rensselaer Polytechnic Institute, Troy, NY, United States) AJTEC2011-44652 Two-Phase Cooling Characteristics of Mono-Dispersed Droplets Impacted on a Heated Surface, Seyed Reza Mahmoudi, Kaz Adamiak, Peter Castle (University of Western Ontario, London, ON, Canada) AJTEC2011-44509 Multiple Droplet Impingements on Nanostructured Surfaces for Enhanced Spray Cooling, Jorge Alvarado (Texas A&M, College Station, TX, United States), Yen-Po Lin (University of Illinois at Urbana Champaign, Urbana, IL, United States) AJTEC2011-44388 Sub-Atmospheric Mini-Jet Impingement Boiling of Water Under Saturated and Subcooled Conditions, Ruander Cardenas, Preeti Mani, Vinod Narayanan (Oregon State University, Corvallis, OR, United States) 40 AJTEC2011-44512 Study on Cooling of Hot Water by Air Flow with Evaporation, Yasuo Koizumi, Yutaka Ebihara (Shinshu University, Ueda, Nagano, Japan), Michio Murase (INSS, Mihama, Fukui, Japan)
Room: Waikiki 2 10:40-12:00, Wednesday, March 16 1-2-2 Computational Heat and Mass Transfer (Multiphase Flows & Interface Issues) - 1 Session Organizer: Masayuki Kaneda (Osaka Prefecture University, Sakai, Osaka, Japan) AJTEC2011-44100
Quantitative Evaluation of the Thickness of the Free Surface by the Interface-Tracking Method, Y. Saito, K. Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Yasumura, Masakazu Shoji (Tohoku University, Sendai, Miyagi, Japan), Yohsuke Matsushita (Kyushu University, Kasuga, Fukuoka, Japan), Hideyuki Aoki, Takatoshi Miura (Tohoku University, Sendai, Miyagi, Japan), S. Ogasawara, M. Daikoku (Hachinohe Institute of Technology, Hachinohe, Aomori, Japan), M. Shirota, T. Inamura (Hirosaki University, Hirosaki, Aomori, Japan) AJTEC2011-44109 Thermodiffusion in a Binary Fluid Mixture Subject to External Vibrations: Effect of Variable Physical Properties, Aram Parsa, Ziad Saghir (Ryerson, Toronto, ON, Canada) AJTEC2011-44138 Simulation of Heat and Mass Transfer Involving Vapour Condensation in the Presence of Non-Condensable Gases in Plane Channels, Mohammad Saraireh (Victoria University, School of Engineering and Science, Melbourne, Victoria, Australia), Graham Thorpe (Victoria University, Centre for Environmental Safety and Risk Engineering, Melbourne, Victoria, Australia), Jun-De Li (Victoria University, School of Engineering and Science, Melbourne, Victoria, Australia)
Room: Waikiki 2 13:40-15:00, Wednesday, March 16 1-2-10 Computational Heat and Mass Transfer (Multiphase Flows & Interface Issues) - 2 Session Organizer: Wensheng Lin (Shanghai Jiao Tong University, Shanghai, China) AJTEC2011-44200 Prediction of Turbulent Convective Heat Transfer to Supercritical CH4/N2 Mixture in a Vertical Circular Tube, Zhongxuan Du, Wensheng Lin, Anzhong Gu (Shanghai Jiao Tong University, Shanghai, China) AJTEC2011-44236 Application of Immersed-Boundary Method to Complex Geometry Flows with Heat Transfer, Chao-An Lin, Chuan-Chieh Liao (National Tsing Hua University, Hsinchu, Taiwan) AJTEC2011-44268 Surface Vortex Simulation at Selected Water Temperatures, Aljaz Skerlavaj, Andrej Lipej (Turboinatitut d.d., Ljubljana, Slovenia), Jure Ravnik, Leopold Skerget (University of Maribor, Maribor, Slovenia) AJTEC2011-44027 Modelling of Combined Heat and Mass Transfer of Water Droplets in Thermal Technology Equipment, Stasys Sinkunas, Gintautas Miliauskas, Kristina Norvaisiene, Kestutis Sinkunas (Kaunas University of Technology, Kaunas, Lithuania)
Room: Waikiki 2 15:20-16:40, Wednesday, March 16 1-2-1 Computational Heat and Mass Transfer (Thermal CFD) - 1 Session Organizer: Tomoya Houra (Nagoya Institute of Technology, Nagoya, Japan) AJTEC2011-44405 Numerical and Experimental Investigation of Temperature and Flow Fields in a Full Vehicle, Devadatta Mukutmoni, Jaehoon Han (Exa Corporation, Livonia, MI, United States), Ales Alajbegovic (Exa Corporation, Ann Arbor, MI, United States) AJTEC2011-44295 Internal Turbine Blade Cooling Simulation: Advanced Models Assessment on Ribbed Configurations, Florian Guillou, Francois Chedevergne (ONERA - DEFA, Chatillon Cedex, France) 41 AJTEC2011-44371 Fundamental Study of Turbulence-Radiation Interaction in Turbulent Channel Flow Using Direct Numerical Simulation, Atsushi Sakurai, Koji Matsubara (Niigata University, Niigata, Japan), Shigenao Maruyama (Tohoku University, Sendai, Miyagi, Japan) AJTEC2011-44278 Numerical Simulation for Heat and Fluid Flow Through Porous Media, Masayuki Kaneda, Yusuke Matsushima, K Suga (Osaka Prefecture University, Sakai, Osaka, Japan)
Room: Waikiki 2
17:00-18:20, Wednesday, March 16 Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 1-2-9 Computational Heat and Mass Transfer (Thermal CFD) - 2 Session Organizer: Atsushi Sakurai (Niigata University, Niigata, Japan) AJTEC2011-44121 CFD Modelling with Buoyancy Effects for a Heat and Moisture Transfer Ceiling Panel, Melanie Fauchoux (University of Saskatchewan, Saskatoon, SK, Canada), Prabal Talukdar (Indian Institute of Technology, New Delhi, India), Carey Simonson, David Torvi (University of Saskatchewan, Saskatoon, SK, Canada) AJTEC2011-44009 CFD Investigating the Effects of Different Mixing Vane Designs on the Localized Thermal-Hydraulic Characteristics in the Rod Bundles with Grid Spacer, C.C. Liu, Yuh-Ming Ferng, C. K. Shih, Bau-Shei Pei (National Tsing Hua University, Hsinchu, Taiwan) AJTEC2011-44431 A CFD Analysis of Transverse Airflow Around the Exterior of an Aircraft Fuselage Inside a Large Enclosure, Yaamunan Venkatesan, Rohitha Paruchuri, T. S. Ravigururajan (Wichita State University, Wichita, KS, United States)
Room: Waikiki 3 10:40-12:00, Wednesday, March 16 1-1-3 Single Phase Convection - 1 Session Organizer: Masaaki Motozawa (Tokyo University of Science, Noda, Japan) Session Co-Organizer: Yaroslav Chudnovsky (Gas Technology Institute, Des Plaines, IL, United States) AJTEC2011-44007 Heat Transfer and Fluid Flow Characteristics Over Streamlined Symmetrical Body Positioned at Unfavorable Angles to the Flow, M.Bassam Nabhan (University of Bahrain, A’Ali, Central, Bahrain) AJTEC2011-44067 Transient Heat Transfer from a Horizontal Plate in Forced Flow of Various Gases, Qiusheng Liu (Kobe University, Kobe, Hyogo, Japan), Makoto Shibahara (Osaka University, Suita, Osaka, Japan), Katsuya Fukuda (Kobe University, Kobe, Hyogo, Japan) AJTEC2011-44091 From Chip to Cooling Tower Data Centre Modelling: Influence of Air-Stream Containment on Operating Efficiency, Thomas J. Breen (Univeristy of Limerick, Limerick, Ireland), Ed J. Walsh, Jeff Punch (Stokes Institute, University of Limerick, Limerick, Ireland), Amip J. Shah, Cullen E. Bash, Brandon Rubenstein, Scot Heath, Niru Kumari (Hewlett Packard Company, Palo Alto, CA, United States) AJTEC2011-44383 Case Study for Energy-Efficiency of Liquid-Cooled Data Centers, Ricardo Rivera-Lopez, Mark Kimber (University of Pittsburgh, Pittsburgh, PA, United States)
Room: Waikiki 3 13:40-15:00, Wednesday, March 16 1-1-8 Single Phase Convection - 2 Session Organizer: Kenichiro Takeishi (Osaka University, Osaka, Japan) AJTEC2011-44377 Proper Orthogonal Decomposition of Husir's Temperature and Velocity Fields, Anthony DiCarlo, 42 Kimberly H. Chung (MITRE Corportation, Bedford, MA, United States) AJTEC2011-44432 Modeling Airflow Inside an Aircraft Interior with Multiple Inlets and Outlets, Rohitha Paruchuri, Yaamunan Venkatesan, T. S. Ravigururajan (Wichita State University, Wichita, KS, United States) AJTEC2011-44259 Testing of Rectangular Channels with Perturbed Entrances for Temperature Difference under Constant Heat Flux, Tunde Bello-Ochende, Jacek Matyja (University of Pretoria, Preotia, Gauteng, South Africa) AJTEC2011-44246 Flow Characteristics Over a Backward-Facing Step in a Duct in Low Reynolds Number Range, Nobuyuki
Suyama, Kyoji Inaoka, Mamoru Senda (Doshisha University, Kyotanabe, Kyoto, Japan) Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021
Room: Waikiki 3 15:20-16:40, Wednesday, March 16 1-1-9 Single Phase Convection - 3 Session Organizer: Kaoru Iwamoto (Tokyo University of Agriculture and Technology, Tokyo, Japan) AJTEC2011-44530 Channel Flow Along a Wavy Heated Wall, Sergey Barboy, Alex Rashkovan, Gennady Ziskind (Ben-Gurion University, Beer-Sheva, Israel) AJTEC2011-44536 Large Eddy Simulation of Film Cooling with Swirling Coolant Flow, Yutaka Oda, Kenichiro Takeishi, Dai Shimizu (Osaka University, Suita, Osaka, Japan) AJTEC2011-44541 Film Cooling Effectiveness Distributions on a Flat Plate with a Double Hole Geometry Using PSP, Lesley Wright, Evan Martin (Baylor University, Waco, TX, United States) AJTEC2011-44350 Average Nusslet Number Correlations for Pressure and Suction Sides of Squealer Turbine Blade Tip, Chaouki Ghenai (Florida Atlantic University, Boca Raton, FL, United States)
Room: Waikiki 3 17:00-18:20, Wednesday, March 16 1-1-10 Single Phase Convection - 4 Session Organizer: Yutaka Oda (Osaka University, Osaka, Japan) AJTEC2011-44623 Design of Miniature Liquid Cooler for LED, Henrik Soerensen, Soeren N. Bertel (Aalborg University, Aalborg, Denmark) AJTEC2011-44626 Scaling Laws for Electrohydrodynamic Air Movers, Nels Jewell-Larsen, Gustavo Joseph, Kenneth Honer (Tessera, Inc., San Jose, CA, United States) AJTEC2011-44640 Thermal Dispersion in Metal Foams, Theresa B. Hoberg, Kenshiro Muramatsu, Erica M. Cherry, John K. Eaton (Stanford University, Stanford, CA, United States) AJTEC2011-44178 Entropy Generation Rate in Forced Convection Flow about Inclined Surfaces in a Porous Medium, Bourhan Tashtoush, Bekir S. Yilbas (KFUPM, Dhahran, Dammam, Saudi Arabia)
Track 2: Combustion and Energy Systems Track Chair: Mamoru Tanahashi (Tokyo Institute of Technology, Tokyo, Japan) Track Co-Chair: S.A. Sherif (University of Florida, Gainesville, FL, United States) Track Co-Chair: Mohamed El-Genk (University of New Mexico, Albuquerque, United States)
Room: Kona Moku B 10:40-12:00, Wednesday, March 16 43 2-1-3 Heat and Mass Transfer in Turbulent Combustion III Session Organizer: Mamoru Tanahashi (Tokyo Institute of Technology, Tokyo, Japan) Session Co-Organizer: OA Ezekoye (University of Texas, Austin, TX, United States) AJTEC2011-44473 DNS of Turbulent Premixed Flames and Heat Transfer in a Constant Volume Vessel, Naoya Fukushima, Akihiko Tsunemi, Masayasu Shimura, Youngsam Shim, Mamoru Tanahashi, Toshio Miyauchi (Tokyo Institute of Technology, Tokyo, Japan) AJTEC2011-44422 Computational Test Design for High-Speed Liquid Impact and Dispersal, Alex Brown, Kurt E. Metzinger
(Sandia National Labs, Albuquerque, NM, United States) Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 AJTEC2011-44290 Effects of Diluent Gases on Combustion of Coal Gasification Gas: Comparison Between N2 and CO2 Dilution, Yukihide Nagano, Kunihoro Kado, Tomohiro Takeo, Yukito Miki, Toshiaki Kitagawa (Kyushu University, Fukuoka, Japan) AJTEC2011-44476 DNS on Autoignition and Flame Propagation of Inhomogeneous Methane-Air Mixtures in a Closed Vessel, Makito Katayama, Naoya Fukushima, Masayasu Shimura, Mamoru Tanahashi, Toshio Miyauchi (Tokyo Institute of Technology, Tokyo, Japan)
Room: Milo III 10:40-12:00, Wednesday, March 16 2-5-1 Heat and Mass Transfer in Air Conditioning and Refrigeration - I Session Organizer: Shigeru Koyama (Kyushu University, Fukuoka, Japan) Session Co-Organizer: S.A. Sherif (University of Florida, Gainesville, FL, United States) AJTEC2011-44215 Influence of Inserting the Heat Pipe into the MH Particle Bed on the Refrigeration Performance, Sangchul Bae (Waseda University, Honjo, Saitama, Japan), Masafumi Katsuta, Keisuke Ishikawa, Yusuke Haruna, Eiji Morita (Waseda University, Tokyo, Japan) AJTEC2011-44019 Analysis of Heat Transfer Characteristics in Liquefaction Processes of CBM with High Nitrogen Content, Wensheng Lin, Ting Gao, Anzhong Gu (Shanghai Jiao Tong University) AJTEC2011-44163 Heat-Pump-Based Thermal Storage for Intermittent Electrical and Thermal Sources, Patrick Phelan, Ronald Calhoun, Steven Trimble, James E Baker, Jon Sherbeck (Arizona State University, Tempe, AZ, United States)
Room: Milo III 13:40-15:00, Wednesday, March 16 2-5-2 Heat and Mass Transfer in Air Conditioning and Refrigeration - II Session Organizer: S.A. Sherif (University of Florida, Gainesville, FL, United States) Session Co-Organizer: Shigeru Koyama (Kyushu University, Fukuoka, Japan) AJTEC2011-44393 Feasibility of Vortex Tube Air-Conditioning System, Mohammad Hamdan, Emad Elnajjar, Ahmed Alawar, Waseem Siddique (United Arab Emirates University, Alain, Abu Dhabi, United Arab Emirates) AJTEC2011-44482 Air Cleaning Method with Humidity Swing Operation for Reducing Suspended Particulate Matters, Nagisa Onoda, Osamu Nakabeppu (Meiji University, Kawasaki, Kanagawa, Japan) AJTEC2011-44591 Water Vapor Adsorption - Desorption Behavior of a Small Piece of Desiccant Rotor in Temperature Swing, Akio Kodama, Yasuko Washio (Kanazawa University, Kanazawa, Japan), Kumiko Okamoto (Mitsubishi Plastic, Inc., Yokohama, Japan), Yugo Osaka (Kanazawa University, Kanazawa, Japan)
44 Room: Milo III 15:20-16:40, Wednesday, March 16 2-3-1 Autoignition and Performance in Engines Session Organizer: Takemi Chikahisa (Hokkaido University, Sapporo, Hokkaido, Japan) Session Co-Organizer: Chao Zhang (University of Western Ontario, London, ON, Canada) AJTEC2011-44282 A Study of HCCI Combustion Characteristics by Using Light Emission and Absorption Spectroscopy, Akira Iijima, Koji Yoshida, Hideo Shoji (Nihon University, Chiyoda-ku, Tokyo, Japan) AJTEC2011-44466
Experimental Study on Combustion in Miniature Glow Ignition Engine - Detection of Spontaneous Light Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Emission and Pressure -, Daisuke Kuno, Masaaki Motozawa, Yasuo Kawaguchi (Tokyo University of Science, Noda, Chiba, Japan) AJTEC2011-44202 A Computational Study on the Effects of Pre-Ignition Processes on Diesel Engine Combustion and Emissions, Suresh Aggarwal (University of Illinois at Chicago, Chicago, IL, United States), Douglas E. Longman (Argonne National Laboratory, Argonne, IL, United States) AJTEC2011-44391 Engine Performance Characteristics Under Controlled Engine Temperature with Variable Operating Parameters, R. K. Mandloi, A. Rehman (M.A.National Institute of Technology, Bhopal, India)
Room: Milo III 17:00-18:20, Wednesday, March 16 2-3-2 Engine Combustion Modeling for Control Session Organizer: Suresh Aggarwal (University of Illinois at Chicago, Chicago, IL, United States) Session Co-Organizer: Akira Iijima (Nihon University, Chiyoda-ku, Tokyo, Japan) AJTEC2011-44203 Development of Diesel Engine Emissions Control Models Based on Heat Release Rate Analysis of Combustion Processes, Dong Wang, Chao Zhang (University of Western Ontario, London, ON, Canada) AJTEC2011-44459 Study on Simple and High-Speed Diesel Combustion Model for Driving Mode Simulator Available for Premixed and Diffusion Combustion of Sprays, Takemi Chikahisa, Yutaka Tabe (Hokkaido University, Sapporo, Hokkaido, Japan), Kazushige Kikuta (Tomakomai National College of Technology, Tomakomai, Japan), Abu Shadat Muhammad Sayem (Hokkaido University, Sapporo, Hokkaido, Japan) AJTEC2011-44035 Multidimensional Modeling of Temperature Distribution in Engine Combustion Chamber, Yuanhong Li, Song-Charng Kong (Iowa State University, Ames, IA, United States) AJTEC2011-44139 Shear Heating Effects in Modeling High Viscosity Oil Piston Skirts EHL in Idling Speeds Initial Engine Start Up, Syed Adnan Qasim, M. Afzaal Malik, Mumtaz Ali Khan (National University of Sciences and Technology, Rawalpindi, Punjab, Pakistan), Riaz Ahmed Mufti (National University of Sciences and Technology, Islamabad, Punjab, Pakistan)
Track 3: Micro/Nano Scale Phenomena Track Chair: Shigeo Maruyama (The University of Tokyo, Tokyo, Japan) Track Co-Chair: Taku Ohara (Tohoku University, Sendai, Japan) Track Co-Chair: Leslie Phinney (Sandia National Laboratories, Albuquerque, NM, United States) Track Co-Chair: Alexis Abramson (Case Western Reserve University, Cleveland, OH, United States)
Room: Kona Moku A 10:40-12:00, Wednesday, March 16 3-2-7 Nanoscale Transport Phenomena during Thermal Conduction - 1 Session Organizer: Baratunde Cola (Georgia Institute of Technology, Atlanta, GA, United States) 45 Session Co-Organizer: Shuhei Inoue (Hiroshima University, Higashi-Hiroshima, Hiroshima, Japan) AJTEC2011-44339 First-Principles-Based Interatomic Potential for Si and Its Thermal Conductivity, Keivan Esfarjani, Gang Chen (Massachusetts Institute of Technology, Cambridge, MA, United States), Asegun Henry (Georgia Institute of, Atlanta, GA, United States) AJTEC2011-44107 Thermal Transport in LEDs for Solid State Lighting, Zonghui Su, Jonathan A. Malen, Jacob H. Melby, Robert F. Davis (Carnegie Mellon University, Pittsburgh, PA, United States) AJTEC2011-44094
Quasi-Ballistic Heat Transfer from Metal Nanostructures on Sapphire, Austin Minnich, Gang Chen Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 (Massachusetts Institute of Technology, Cambridge, MA, United States)
Room: Milo IV&V 10:40-12:00, Wednesday, March 16 3-3-6 Thermal Properties and Performance of Nanofluids Session Organizer: Leslie Phinney (Sandia National Laboratories, Albuquerque, NM, United States) Session Co-Organizer: Mitsuhiro Matsumoto (Kyoto University, Kyoto, Japan) AJTEC2011-44649 Thermal Conductivity Affected by Temperature and Particle Size in Al2O3-Water Nanofluids, Fei Duan, D. Kwek, A. Crivoi (School of Mechanical and Aerospace Engineering, Singapore, Singapore) AJTEC2011-44372 A Simple Analytical Model for Specific Heat of Nanofluid with Tube Shaped and Disc Shaped Nanoparticles, Seunghwan Jung, Debjyoti Banerjee (Texas A&M University, College Station, TX, United States) AJTEC2011-44375 Experimental Investigation of Molten Salt Nanofluid for Solar Thermal Energy Application, Donghyun Shin, Debjyoti Banerjee (Texas A&M University, College Station, TX, United States) AJTEC2011-44659 The Effective Thermal Conductivity of Water Based Alumina Nanofluids in the Fully Developed Laminar Flow in a Circular Tube Under a Constant Wall Heat Flux Condition, Young Su Na, Joon Sik Lee (Seoul National University, Seoul, Gwanak-gu, Korea (Republic)), Kenneth Kihm (University of Tennessee, Knoxville, TN, United States)
Room: Milo IV&V 13:40-15:00, Wednesday, March 16 3-3-7 Thermal Properties of Nanoporous and Nanostructured Materials Session Organizer: Keunhan (Kay) Park (University of Rhode Island, Kingston, RI, United States) Session Co-Organizer: Takashi Tokumasu (Institute of Fluid Science, Tohoku University, Sendai, Japan) AJTEC2011-44046 Thermal Conductivity of Sol-Gel Amorphous Mesoporous Silica Thin Films: Molecular Dynamics Simulations versus Experiments, Thomas Coquil, Laurent Pilon (University of California, Los Angeles, Los Angeles, CA, United States) AJTEC2011-44047 Thermal Conductivity of Amorphous and Crystalline Mesoporous Titania Thin Films From 30 to 320 K, Jin Fang (University of California, Los Angeles, Los Angeles, CA, United States), Christian Reitz, Torsten Brezesinski (Justus-Liebig-University of Giessen, Giessen, Germany), E. Joseph Nemanick, Sarah Tolbert, Laurent Pilon (University of California, Los Angeles, Los Angeles, CA, United States) AJTEC2011-44137 Estimating Density Reduction and Phonon Localization from Optical Thermal Conductivity Measurements of Porous Silica and Aerogel Thin Films, Patrick Hopkins, Bryan J Kaehr (Sandia National Labs, Albuquerque, NM, United States), Darren Dunphy (Unversity of New Mexico, Advanced Materials Lab, Albuquerque, NM, United States), C. Jeffrey Brinker (Sandia National Labs, Albuquerque, NM, United States) 46 AJTEC2011-44571 In-Plane Thermal Conductivity of PEM Fuel Cell Gas Diffusion Layers, Ehsan Sadeghi, Ned Djilali (University of Victoria, Victoria, BC, Canada), Majid Bahrami (Simon Fraser University, Surrey, BC, Canada)
Room: Milo IV&V 15:20-16:40, Wednesday, March 16 3-3-8 Properties of Micro- and Nanomaterials - 1 Session Organizer: Koji Miyazaki (Kyushu Institute of Technology, Kitakyushu, Fukuoka, Japan)
Session Co-Organizer: Bong Jae Lee (University of Pittsburgh, Pittsburgh, PA, United States) Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 AJTEC2011-44315 Predicting Phonon Properties from Molecular Dynamics Simulations Using the Spectral Energy Density, Joseph Turney, John Thomas, Alan McGaughey (Carnegie Mellon University, Pittsburgh, PA, United States), Cristina H. Amon (University of Toronto, Toronto, ON, Canada) AJTEC2011-44160 Role of Chemical Ordering on Phononic Transport in Binary Alloys, John C. Duda, Timothy S. English, Donald A. Jordan, Pamela Norris, William A. Soffa (Department of Mechanical and Aerospace Engineering, University of Virginia, Charlottesville, VA, United States) AJTEC2011-44644 Role of Interface Thermal Boundary Resistance, Straining and Morphology in Thermal Conductivity of a Set of Si-Ge Superlattices and Biomimetic Si-Ge Nanocomposites, Vikas Samvedi, Vikas Tomar (Purdue University, West Lafayette, IN, United States) AJTEC2011-44548 Thermal Conductivity Augmentation in Polymeric Nanocomposites, Leandro Sphaier, Luiz Carlos Nunes, João Marciano Reis, Debora C. Moreira (Universidade Federal Fluminense, Niteroi, RJ, Brazil)
Room: Milo IV&V 17:00-18:20, Wednesday, March 16 3-3-9 Properties of Micro- and Nanomaterials - 2 Session Organizer: Koji Takahashi (Kyushu University, Fukuoka, Japan) Session Co-Organizer: Keunhan (Kay) Park (University of Rhode Island, Kingston, RI, United States) AJTEC2011-44184 Size-Dependent Model for Thin Film Thermal Conductivity, Alan McGaughey (Carnegie Mellon University, Pittsburgh, PA, United States), Daniel P. Sellan (University of Toronto, Toronto, ON, Canada), Eric S. Landry (Lytron, Inc., Woburn, MA, United States), Cristina H. Amon (University of Toronto, Toronto, ON, Canada) AJTEC2011-44273 Impact on Thermal Conductivities of Nanostructured Bismuth Telluride Based Thin Films, Saburo Tanaka (Kyushu Institute of Technology, Kitakyushu, Fukuoka, Japan), Masayuki Takashiri (Komatsu Ltd., Hiratsuka, Kanagawa, Japan), Koji Miyazaki (Kyushu Institute of Technology, Kitakyushu, Fukuoka, Japan) AJTEC2011-44337 Measurements of the Thermal Conductivity of Individual Alfa-Tetragonal Boron Nanoribbons, Juekuan Yang, Scott Waltermire, Yang Yang, Deyu L (Vanderbilt Unviersity, Nashville, TN, United States), Xiaoxia Wu, Terry Xu (The University of North Carolina at Charlotte, Charlotte, NC, United States)
47
Thursday, March 17
Track 4: Keynote Lectures Track Chair: Kenji Yasuoka (Keio University, Yokohama, Kanagawa, Japan) Track Co-Chair: James Klausner (Univesity of Florida, Gainesville, FL, United States)
Room: Kona Moku Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 9:00-9:40, Thursday, March 17 4-1-8 Keynote - 7 Session Organizer: Kenji Yasuoka (Keio University, Yokohama, Japan) AJTEC2011-44641 Micro and Extended-Nano Fluidics on Microchip for Chemistry and Bio-Medical Applications, Takehiko Kitamori (The University of Tokyo, Tokyo, Japan)
Room: Kona Moku 9:40-10:20, Thursday, March 17 4-1-7 AIChE Donald Q. Kern Award Lecture Session Organizer: Masahiro Kawaji (City College of New York, New York, NY, United States) AJTEC2011-44663 Nucleate Boiling Enhancements on Porous Graphite and Micro-Porous and Macro-Finned Copper Surfaces, Mohamed El-Genk (University of New Mexico, Albuquerque, United States)
Track 1: Fundamentals of Heat and Mass Transfer Track Chair: Kazuyoshi Nakabe (Kyoto University, Kyoto, Kyoto, Japan) Track Co-Chair: Raj M. Manglik (University of Cincinnati, Cincinnati, OH, United States) Track Co-Chair: Chang Oh (Idaho National Laboratory, Idaho Falls, ID, United States)
Room: Honolulu 10:40-12:00, Thursday, March 17 1-9-1 Heat Transfer in Manufacturing - Session 1 Session Organizer: Ben Q. Li (University of Michigan, Dearborn, MI, United States) Session Co-Organizer: Takushi Saito (Tokyo Institute of Technology, Tokyo, Japan) AJTEC2011-44068 Scaling Thermocapillary Surface Velcoity in Weld Pool, Peng S. Wei, C. L. Lin (Dept. Mech.& Electro-Mech. Eng., National Sun Yat-Sen University, Kaohsiung, Taiwan), C. N. Ting (Dragon Steel Corporation, Taichung Hsien, Taiwan) AJTEC2011-44017 Precise Control Method of Temperature Rising Speed of Wafer During Rapid Thermal Processing with Lamp Heaters, Shigeki Hirasawa, Tsuyoshi Kawanami (Kobe University, Kobe, Japan) AJTEC2011-44018 Experimental Study on Model Predictive Control to Minimize Temperature Change of Vertical Plate with Varying Heat Generation, Shigeki Hirasawa, Tsuyoshi Kawanami (Kobe University, Kobe, Japan) AJTEC2011-44384 Heat Transfer Analysis of a Novel Piezoelectric Air Pump, Andrew Eastman, Mark Kimber (University of Pittsburgh, Pittsburgh, PA, United States), Atsuhiko Hirata, Gaku Kamitani (Murata Manufacturing Co., Ltd., Kyoto, Japan)
Room: Honolulu 13:40-15:00, Thursday, March 17 48 1-9-2 Heat Transfer in Manufacturing - Session 2 Session Organizer: T. S. Ravigururajan (Wichita State University, Wichita, KS, United States) Session Co-Organizer: Kazuyoshi Fushinobu (Tokyo Institute of Technology, Tokyo, Japan) AJTEC2011-44108 Development of Heat Sinks for Air Cooling and Water Cooling Using Lotus-Type Porous Metals, Hideo Nakajima (Institute of Scientific and Industrial Research, Osaka University, Ibaraki, Japan), Hiroshi Chiba (Mitsubishi Electric Corp., Amagasaki, Osaka, Japan), Tetsuro Ogushi (Hiroshima International University, Kure, Japan) AJTEC2011-44392
Thermal Analysis of Direct Chill Casting, Ashok Kumar Nallathambi, Mohit Tyagi, Eckehard Specht, Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Albrecht Bertram (Otto von Guericke University, Magdeburg, Germany) AJTEC2011-44366 Development of New Heat Exchanger Design, Anthony Couzinet, Daniel Pierrat, Laurent Gros (CETIM, NANTES, France), Thierry Kunc (Bertin Technologies, Saint Quentin en Yvelines, France), Antoine Foata (DGA Essais Propulseurs, Orsay, France)
Room: Honolulu 15:20-16:40, Thursday, March 17 1-9-3 Heat Transfer in Manufacturing - Session 3 Session Co-Organizer: Shigeki Hirasawa (Kobe University, Kobe, Japan) AJTEC2011-44455 Formation of Electro-Conductive Part on Polymeric Material Surface by CO2 Laser Irradiation, Takushi Saito, Tatsuya Kawaguchi, Isao Satoh (Tokyo Institute of Technology, Tokyo, Japan) AJTEC2011-44456 Laser Direct Joining Between Stainless Steel and Amorphous Polyamide Plastic, Yousuke Kawahito (Joining and Welding Research Institute, Osaka University, Ibaraki, Osaka, Japan), Koji Nishimoto (Anan National College of Technology, Anan, Tokushima, Japan), Seiji Katayama (Joining and Welding Research Institute, Osaka University, Ibaraki, Osaka, Japan) AJTEC2011-44564 Thermal Effects During Hollow Polymer Fiber Drawing, Ashley Emery, Ann Mescher, Heather Dillon, Spencer Grange (University of Washington, Seattle, WA, United States) AJTEC2011-44240 FDTD Analysis of Ultra Short Pulse Laser Propagation in Transient Lens Effect, Munehiro Chijiiwa, Kazuyoshi Fushinobu, Ken Okazaki (Tokyo Institute of Technology, Tokyo, Japan)
Room: Kou 10:40-12:00, Thursday, March 17 1-7-5 Heat and Mass Transfer in Micro-Scale Systems - 5 Session Organizer: Hiroyasu Ohtake (Kogakuin University, Tokyo, Japan) AJTEC2011-44064 Experimental Investigation of a Scaled-Up Passive Interdigital Micromixer with Circular-Sector Mixing Elements, Kristina J. Cook, YanFeng Fan, Ibrahim Hassan (Concordia University, Montreal, QC, Canada) AJTEC2011-44218 Simultaneous Heat Transfer and Pressure Drop Measurements for a Horizontal Micro-Tube, Lap Mou Tam, Hou Kuan Tam (University of Macau, Macau, China), Afshin J. Ghajar (Oklahoma State University, Stillwater, OK, United States) AJTEC2011-44570 Thermal Contact Resistance at Metal Foam-Solid Surface Interface, Ehsan Sadeghi (University of Victoria, Victoria, BC, Canada), Scott Hsieh (Simon Fraser University, Burnaby, BC, Canada), Majid Bahrami (Simon Fraser University, Surrey, BC, Canada) AJTEC2011-44572 Finite Element Analysis of Reaction Front Tracking in Lime Calcination, P Ch Gourisankar Sandaka, 49 Ashok Kumar Nallathambi, Eckehard Specht (Otto Von Guericke University Magdeburg, Magdeburg, Germany)
Room: Kou 13:40-15:00, Thursday, March 17 1-2-5 Computational Heat and Mass Transfer (Numerical Schemes & Algorithms) - 1 Session Organizer: Kosuke Nishida (Kyoto Institute of Technology, Kyoto, Japan) AJTEC2011-44291 Thermal Optimization for Internal Embedded Conductive Cooling Schemes Using Topology
Optimization Techniques, Jaco Dirker, Josua P. Meyer (University of Pretoria, Preotia, Gauteng, South Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Africa) AJTEC2011-44082 Scale Effects on Thermal-Fluid Performance of Optimized Hierarchical Structures, Ercan M. Dede, Yan Liu (Toyota Research Institute of North America, Ann Arbor, MI, United States) AJTEC2011-44539 Evaluation of Uncertainties of One-Directional Analytical Model for Thermoreflectance Technique, Changhu Xing, Zilong Hua, Heng Ban (Utah State University, Logan, UT, United States), David Hurley (Idaho National Laboratory, Idaho Falls, ID, United States), J. Rory Kennedy (DOE Idaho National Lab, Idaho Falls, ID, United States) AJTEC2011-44565 Combining Meshless Analysis and Kalman Filters to Estimate Parameters When System Models are Inaccurate, Ashley Emery (University of Washington, Seattle, WA, United States), Darrell Pepper (University of Nevada, Las Vegas, Las Vegas, NV, United States)
Room: Kou 15:20-16:40, Thursday, March 17 1-2-12 Computational Heat and Mass Transfer (Numerical Schemes & Algorithms) - 2 Session Organizer: Yutaka Oda (Osaka University, Suita, Osaka, Japan) AJTEC2011-44275 BEM Based Solution of Turbulent Flow over Periodic Hills with Heat Transfer, Leopold Skerget, Jure Ravnik (University of Maribor, Maribor, Slovenia) AJTEC2011-44318 Introduction of Object Oriented FEM Model Developed for Solving Thermal-Hydraulic Processes, Dalibor Frydrych, MIlan Hokr (Technical University of Liberec, Liberec, Czech Republic) AJTEC2011-44547 Comparisons Between Integral Transform, Finite Volumes and Combined Solution Strategies for Convective Heat Transfer Problems, Daniel Chalhub, Leandro Sphaier (Universidade Federal Fluminense, Niteroi, RJ, Brazil)
Room: Waikiki 1 10:40-12:00, Thursday, March 17 1-3-1 Solid-Liquid Phase Change - 1 Session Organizer: Shuichii Torii (Kumamoto University, Kumamoto, Japan) Session Co-Organizer: Deyu Li (Vanderbilt University, Nashville, TN, United States) AJTEC2011-44653 Entropy Generation Analysis for Mono-Dispersed Droplet Cooling at Critical Heat Flux Regime, Seyed Reza Mahmoudi (Department of Electrical and Computer Engineering, University of Western Ontario, London, ON, Canada), Kaz Adamiak, Peter Castle (University of Western Ontario, London, ON, Canada) AJTEC2011-44662 Effects of Surface Treatment on Frost Formation and Defrosting, Kim Kyoungmin, Kwan-Soo Lee (Hanynag University, Sungdong-gu, Seoul, Korea (Republic)) AJTEC2011-44367 Crystal Orientation Rotation of Ice During Growth in a Bended Capillary, Yoshikazu Teraoka, Ryo Fukuno, 50 Koji Matsumoto (Chuo University, Tokyo, Japan) AJTEC2011-44031 Numerical Model of Heat Transfer and Mass Transfer During the Solidification of a Concasting Steel, Josef Stetina, Frantisek Kavicka (Brno University of Technology, Brno, Czech Republic)
Room: Waikiki 1 13:40-15:00, Thursday, March 17 1-3-3 Solid-Liquid Phase Change - 2 Session Organizer: Placidus B. Amama (UDRI/AFRL, Dayton, OH, United States)
Session Co-Organizer: Hiroyuki Kumano (Shinshu University, Nagano, Japan) Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 AJTEC2011-44099 Numerical Study of the Vertical Solidification Process, Sabrina Nouri (UDTS, Algiers, Algeria), Mouhamed Benzeghiba (USTHB, Algiers, American Samoa), Ahmed Benzaoui (University of Sciences and Technology, Algiers, Algeria) AJTEC2011-44288 Numerical Simulation for Infrared-Assisted Freeze Drying of Solution Products, Chi Sung Song (Korea Institute of Machinery and Materials, Daejeon, Korea (Republic)), Jin Hyun Nam (Daegu University, Gyungsan, Korea (Republic)), Charn-Jung Kim (Seoul National University, Seoul, Korea (Republic)) AJTEC2011-44274 Estimation of Cooling Performance of PCM Module by Using CFD Analysis with Enthalpy Porosity Method, Tomoyuki Hatakeyama, Masaru Ishizuka, Shinji Nakagawa, Sadakazu Takakuwa (Toyama Prefectural University, Toyama, Japan) AJTEC2011-44425 Phase Change Material and the Thermoelectric Effect for Solar Energy Harvesting and Storage, Qi Zhang, Amen Agbossou (University of Savoie, Bourget du Lac, France), Zhihua Feng (University of Science and Technology of China, Hefei, China), Anne-Cecile Grillet (University of Savoie, Bourget du Lac, France)
Room: Waikiki 1 15:20-16:40, Thursday, March 17 1-3-12 Solid-Liquid Phase Change - 3 Session Organizer: Placidus B. Amama (UDRI/AFRL, Dayton, OH, United States) Session Co-Organizer: Tomoyuki Hatakeyama (Toyama Prefectural University, Toyama, Japan) AJTEC2011-44162 Scale Analysis of Convective Melting with Internal Heat Generation, Ali Siahpush (INL, Idaho Falls, ID, United States), John Crepeau (University of Idaho, Moscow, ID, United States) AJTEC2011-44165 Experimental Verification of Expedited Freezing of Nanoparticle-Enhanced Phase Change Materials (NEPCM), Liwu Fan, Jay M. Khodadadi (Auburn University, Auburn, AL, United States) AJTEC2011-44133 Modified MgH2 and Ca(BH4)2 for High-Capacity Thermal Energy Storage, Placidus B. Amama (UDRI/AFRL, Dayton, OH, United States), Jonathan E. Spowart (Air Force Research Laboratory, WPAFB, OH, United States), Andrey Voevodin (AFRL/RXBT, Dayton, OH, United States), Timothy Fisher (Air Force Research Laboratory, Materials and Manufacturing Directorate, WPAFB, OH, United States)
Room: Waikiki 2 10:40-12:00, Thursday, March 17 1-2-4 Computational Heat and Mass Transfer (Heat Exchangers) - 1 Session Organizer: Takuto Araki (Yokohama National University, Yokohama, Japan) Session Co-Organizer: Laura Schaefer (University of Pittsburgh, Pittsburgh, PA, United States) AJTEC2011-44494 A Numerical Investigation of Heat Transfer from Small Horizontal Cylinders at Near-Critical Pressures, Gopinath Warrier (University of California, Los Angeles, Los Angeles, CA, United States), Yohann 51 Rousselet (INSA Lyon, Lyon, Villeurbanne Cedex, France), Vijay K. Dhir (University of California, Los Angeles, Los Angeles, CA, United States) AJTEC2011-44618 Unsteady Conjugate Heat Transfer Analysis of an Air Immersed Solid Particle with Application to an Innovative Heat Exchanger, Leonardo Nettis, Fabio De Bellis, Luciano A. Catalano (Polytechnic University of Bari, Bari, Italy), Roberto Verzicco (University of Rome Tor Vergata, Rome, Italy) AJTEC2011-44443 Heat Transfer Characteristics of Baffled Channel Flow, Changwoo Kang, Kyung-Soo Yang (Inha University, Incheon, Korea (Republic))
Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Room: Waikiki 2 13:40-15:00, Thursday, March 17 1-2-11 Computational Heat and Mass Transfer (Heat Exchangers) - 2 Session Organizer: Kazunori Kuwana (Yamagata University, Yonezawa, Yamagata, Japan) AJTEC2011-44483 Three-Dimensional Simulations of the Flow Deflection in a Louvered Fin Heat Exchanger with Round Tubes in a Staggered Arrangement, Henk Huisseune, Christophe T’Joen, Peter De Jaeger, Bernd Ameel, Michel De Paepe (Ghent University, Gent, Belgium) AJTEC2011-44285 Geometric Optimization of Multiple-Arrays of Micropin-Fins, Tunde Bello-Ochende, Josua P. Meyer, Fervent U. Ighalo (University of Pretoria, Preotia, Gauteng, South Africa) AJTEC2011-44629 A Parametric Study on Fluid Flow and Heat Transfer in a Printed Circuit Heat Exchanger, Sang-Moon Lee, Kwang-Yong Kim (Inha University, Incheon, Korea (Republic))
Room: Waikiki 2 15:20-16:40, Thursday, March 17 1-2-6 Computational Heat and Mass Transfer (High Temperature Issues) Session Organizer: Naoya Fukushima (Tokyo Institute of Technology, Tokyo, Japan) Session Co-Organizer: Laura Schaefer (University of Pittsburgh, Pittsburgh, PA, United States) AJTEC2011-44223 Influence of Flame Front Instability on Flame Propagation Behavior, Kenji Mukaiyama, Kazunori Kuwana (Yamagata University, Yonezawa, Yamagata, Japan) AJTEC2011-44234 Numerical Simulations of Heat Fluxes for Atmospheric Re-Entries, Romain Savajano (Ecole Polytechnique Fédérale de Lausanne, Lausanne, Vaud, Switzerland), Daniel F. Potter (University of Queensland, Brisbanne, Australia), Pénélope Leyland (EPFL Ecole Polytechnique Fédérale de Lausanne, Lausanne, VD, Switzerland) AJTEC2011-44417 Study on the Air Ingress Mitigation Methods in the Very High Temperature Gas Cooled Reactor (VHTR), Chang Oh, Eung Soo Kim (Idaho National Laboratory, Idaho Falls, ID, United States) AJTEC2011-44233 Thermal Radiative Fluid-Structure Coupling for Atmospheric Entries, Ojas Joshi, Pénélope Leyland (EPFL Ecole Polytechnique Fédérale de Lausanne, Lausanne, VD, Switzerland)
Room: Waikiki 3 10:40-12:00, Thursday, March 17 1-6-1 Biotransport Analysis 1 Session Organizer: Ryo Shirakashi (The University of Tokyo, Tokyo, Japan) Session Co-Organizer: Kunal Mitra (Florida Tech, Melbourne, FL, United States) AJTEC2011-44660 Three-Dimensional Numerical Study on Freezing Phase Change Heat Transfer in Biological Tissue Embedded with Two Cryoprobes, Fang Zhao, Zhenqian Chen, Mingheng Shi (Southeast University, 52 Nanjing, Jiangsu, China) AJTEC2011-44463 Numerical Study on Microwave Dehydro-Freezing of Fish Tissues, Yuichiro Oku, Hirofumi Tanigawa, Takaharu Tsuruta (Kyushu Institute of Technology, Kitakyushu, Fukuoka, Japan) AJTEC2011-44214 Effect of Three-Dimensional Electric Field and Heat Conduction to Electrodes on the Temperature Rise During Irreversible Electroporation, Seiji Nomura, Kosaku Kurata, Hiroshi Takamatsu (Kyushu University, Fukuoka, Japan)
Room: Waikiki 3 Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 13:40-15:00, Thursday, March 17 1-6-2 Biotransport Analysis 2 and Medical Applications Session Organizer: Hiroshi Takamatsu (Kyushu University, Fukuoka, Japan) Session Co-Organizer: Bumsoo Han (Purdue University, West Lafayette, IN, United States) AJTEC2011-44486 Time-Resolved Diffuse Optical Tomography of Human Forearm Under Exercise, Yasuomi Endo, Yukari Tanikawa, Shinpei Okawa, Kazuto Masamoto (The University of Electro-Communications, Tokyo, Japan), Yoko Hoshi (Tokyo Institute of Psychiatry Tokyo, Japan), Yukio Yamada (The University of Electro-Communications, Tokyo, Japan), Michio Miyakawa (Niigata University, Niigata, Japan), Hidetaka Okada (University of Electro-Communications, Tokyo, Japan), Tomohiro Kizuka (University of Tsukuba, Ibaraki, Japan) AJTEC2011-44480 Effect of the Arrangement of Optodes for 3D Diffuse Optical Tomography, Kazuhiro Uchida, Shinpei Okawa, Kazuto Masamoto (University of Electro-Communications, Tokyo, Japan), Yoko Hoshi (Tokyo Institute of Psychiatry, Tokyo, Japan), Yukio Yamada (The University of Electro-Communications, Tokyo, Japan) AJTEC2011-44404 Measurement of Cellular Adhesion Ratios under High Shear Flow on Various Substrates, Ryo Shirakashi, Kiyoshi Takano, Christophe Provin, Yasuyuki Sakai, Teruo Fujii (The University of Tokyo, Tokyo, Japan) AJTEC2011-44347 Transient Analysis of Microorganism Temperature and Evaporative Losses in an Algae Biofilm Photobioreactor, Thomas Murphy, Halil Berberoglu (The University of Texas at Austin, Austin, TX, United States)
Room: Waikiki 3 15:20-16:40, Thursday, March 17 1-6-3 Optical Measurement of Biomaterials Session Organizer: Ryo Shirakashi (The University of Tokyo, Tokyo, Japan) Session Co-Organizer: Kunal Mitra (Florida Tech, Melbourne, FL, United States) AJTEC2011-44475 Measurement of Optical Properties of Human Skin, Kazuhisa Hattori (The University of Electro-Communications, Tokyo, Japan), Tomohiro Kuwahara (Shiseido Company Ltd., Chuou, Japan), Masato Ohmi, Masamitsu Haruna (Osaka University, Osaka, Japan), Shinpei Okawa, Kazuto Masamoto, Yukio Yamada (The University of Electro-Communications, Tokyo, Japan) AJTEC2011-44471 Influence of Blood Glucose Level on the Scattering Coefficient of the Skin in Near-Infrared Spectroscopy, Sachiko Kessoku (The University of Electro-Communications, Tokyo, Japan), Katsuhiko Maruo (Panasonic Electric Works Co. Ltd., Kadoma, Japan), Shinpei Okawa, Kazuto Masamoto, Yukio Yamada (The University of Electro-Communications, Tokyo, Japan) AJTEC2011-44458 Measurement of Fluorescence Properties in Light Scattering Medium, Shouji Maruoka, Yohei Mitsui, Shinpei Okawa (The University of Electro-Communications, Tokyo, Japan), Yoko Hoshi (Tokyo Institute of Psychiatry, Tokyo, Japan), Yukio Yamada (The University of Electro-Communications, Tokyo, Japan) 53 AJTEC2011-44024 Tissue-Light Interaction During Monitoring of Thermal Lesion using Quantum Dot Mediated Fluorescence Thermometry, Willard L. Hanson, Najma Abdollahzadeh (University of Texas at Arlington, Arlington, TX, United States), Bumsoo Han (Purdue University, West Lafayette, IN, United States)
Track 2: Combustion and Energy Systems Track Chair: Mamoru Tanahashi (Tokyo Institute of Technology, Tokyo, Japan)
Track Co-Chair: S.A. Sherif (University of Florida, Gainesville, FL, United States) Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Track Co-Chair: Mohamed El-Genk (University of New Mexico, Albuquerque, United States)
Room: Kona Moku B 10:40-12:00, Thursday, March 17 2-6-1 Heat and Mass Transfer in Reaction Systems I Session Organizer: Yukihiko Matsumura (Hiroshima University, Higashi-Hiroshima, Japan) Session Co-Organizer: Kalyan Annamalai (Texas A&M University, College Station, TX, United States) AJTEC2011-44201 Design and Testing of a High Pressure and Temperature, Optically Accessible, Entrained Flow Coal Gasifier, Indraneel Sircar, Rohan Gejji, Anup Sane, David Blunck, Scott Meyer, Jay P. Gore (Purdue University, West Lafayette, IN, United States) AJTEC2011-44073 Determination of Heat of Reaction in Supercritical Water, Yukihiko Matsumura, Go Tsujimoto, Takuro Konishi (Hiroshima University, Higashi-Hiroshima, Japan) AJTEC2011-44130 Modeling Compressive Reaction in Shock-Driven Secondary Granular Explosives, Aaron Brundage (Sandia National Laboratories, Albuquerque, NM, United States) AJTEC2011-44210 Oxygen Supply to Exothermic Combustion Reactions in Compost Heating System (CHS) by Permanent Magnets, Harumi Toriyama, Yutaka Asako (Tokyo Metropolitan University, Tokyo, Japan)
Room: Kona Moku B 13:40-15:00, Thursday, March 17 2-6-2 Heat and Mass Transfer in Reaction Systems II Session Organizer: Kalyan Annamalai (Texas A&M University, College Station, TX, United States) Session Co-Organizer: Yukihiko Matsumura (Hiroshima University, Higashi-Hiroshima, Japan) AJTEC2011-44072 Proposal and System Design of Chemical Dehumidification Process, Koichi Shirai (Hiroshima University, Higashi-Hiroshima, Japan), Hiroyuki Kitahara (Total System Laboratory, Ibaraki, Japan), Yukihiko Matsumura (Hiroshima University, Higashi-Hiroshima, Japan) AJTEC2011-44253 A Proposal of Waste Heat Recovery System Through Methanol Steam Reforming Integrated with Absorption Heat Pump, Shunsuke Kawasaki, Willy Yanto Wijaya, Hirotatsu Watanabe, Ken Okazaki (Tokyo Institute of Technology, Tokyo, Japan) AJTEC2011-44664 Detailed Numerical Modeling of a Microchannel Reactor for Methane-Steam Reforming, Kevin Drost, Benn J. Eilers, Daniel Peterson, Sourabh Apte, Vinod Narayanan, John Schmitt (Oregon State University, Corvallis, OR, United States) AJTEC2011-44390 Steam-Methane Reforming in a Microchannel under Constant and Variable Axial Surface Temperature Profiles, Benn J. Eilers, Vinod Narayanan, Sourabh Apte, John Schmitt (Oregon State University, Corvallis, OR, United States)
54 Room: Kona Moku C 10:40-12:00, Thursday, March 17 2-2-7 Heat and Mass Transfer in Combustion Systems VII - Soot, Particles and Emissions - Session Organizer: Kris L Jorgensen (The Babcock & Wilcox Company, Barberton, OH, United States) Session Co-Organizer: Kazunori Kuwana (Yamagata University, Yonezawa, Yamagata, Japan) AJTEC2011-44413 Effects of Fuel Species on Soot Formation in Laminar Counterflow - Comparison Between Diesel Fuel and Palm Methyl Ester as an Alternative Fuel -, Jun Hayashi (Osaka University, Suita, Osaka, Japan), Nozomu Hashimoto, Hiroyuki Nishida (Central Research Institute of Electric Power Industry, Yokosuka,
Japan), Fumiteru Akamatsu (Osaka University, Suita, Osaka, Japan) Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 AJTEC2011-44454 Soot and PAH Formation Characteristics in a Micro Flow Reactor with a Controlled Temperature Profile, Ryu Tanimoto, Takuya Tezuka, Susumu Hasegawa, Hisashi Nakamura (Institute of Fluid Science, Tohoku University, Sendai, Japan), Kaoru Maruta (Tohoku University, Sendai, Japan) AJTEC2011-44615 Low-Emissions Renewable Power Generation using Liquid Biofuels, Leo D. Eskin, Michael S. Klassen, Richard J. Roby, Richard G. Joklik, Maclain M. Holton (LPP Combustion, LLC, Columbia, MD, United States) AJTEC2011-44594 A Study of Fine Particle Spheroidization Process by Elevated-Pressure Pure Oxygen Flame, Shingo Suzuki, Koji Sasaki, Noriaki Nakatsuka, Jun Hayashi (Osaka University, Suita, Osaka, Japan), Yoshiyuki Hagiwara, Kimio Iino (Taiyo Nippon Sanso, Hokuto, Yamanashi, Japan), Fumiteru Akamatsu (Osaka University, Suita, Osaka, Japan)
Room: Kona Moku C 13:40-15:00, Thursday, March 17 2-2-8 Heat and Mass Transfer in Combustion Systems VIII - Measurements and Dynamics in Combustion Systems - Session Organizer: Fumiteru Akamatsu (Osaka University, Suita, Osaka, Japan) Session Co-Organizer: Chenn Zhou (Purdue University Calumet, Hammond, IN, United States) AJTEC2011-44025 Schmidt-Boelter Heat Flux Gage Sensitivity Coefficients in Radiative and Convective Environments, James Nakos, Alex Brown (Sandia National Laboratories, Albuquerque, NM, United States) AJTEC2011-44061 Aerodynamics of Long Aspect Ratio Fibrous Particles under Settling, Guo Qi, Gus Nathan, Richard Kelso (The University of Adelaide, Adelaide, SA, Australia) AJTEC2011-44326 Measuring Ignition Temperature and Heat Generation from Ethanol-Water-Oxygen Mixtures on Platinum, Joshua Gibson, Judi Steciak, Ralph Budwig (University of Idaho - Boise, Boise, ID, United States), Steve Beyerlein (University of Idaho - Moscow, Moscow, ID, United States)
Room: Milo III 10:40-12:00, Thursday, March 17 2-4-9 Heat and Mass Transfer in Energy Devices IX - Thermal Cycles - Session Organizer: Naoki Shikazono (The University of Tokyo, Tokyo, Japan) AJTEC2011-44613 Thermo-Fluid Analysis of Prismatic Fuel Blocks using Multi-Dimensional Heat Conduction and One-Dimensional Fluid Model, Nam-Il Tak, Min-Hwan Kim, Hong-Sik Lim (Korea Atomic Energy Research Institute, Daejeon, Korea (Republic)), Goon-Cherl Park (Seoul National University, Seoul, Korea (Republic)) AJTEC2011-44627 CFD Analysis on the Influence of Coolant Distribution Blocks on the Core Hot Spot Temperature in a Prismatic Very High Temperature Reactor, Min-Hwan Kim, Nam-Il Tak, Jae Man Noh (Korea Atomic 55 Energy Research Institute, Daejeon, Korea (Republic)), Goon-Cherl Park (Seoul National University, Seoul, Korea (Republic)) AJTEC2011-44052 Investigations on Performance of Stirling Engine Regenerator Matrix, Dadasaheb J. Shendage, Shireesh B. Kedare, Shridhar L. Bapat (Indian Institute of Technology Bomaby, Mumbai, Maharashtra, India) AJTEC2011-44503 A Generalized Ecological, Internally Irreversible Carnot Cycle, As an Optimum Compromise Between Maximum Power and Efficiency for a Given Heat Transfer Inventory, Mohand Ait-Ali (Ecole Nationale Polytechnique, El Harrach, Algiers, Algeria)
Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Room: Milo III 13:40-15:00, Thursday, March 17 2-4-7 Heat and Mass Transfer in Energy Devices VII - Heat Transfer & Thermal Devices - Session Organizer: Tetsuhiko Maeda (AIST, Tsukuba, Ibaraki, Japan) Session Co-Organizer: Julie Asfia (Boeing Company, Huntington Beach, CA, United States) AJTEC2011-44256 Snow-Melting System Around Steel Top of Underground Fire Cistern using Heat Pipe BACH, Niro Nagai, Kensuke Suzuki (University of Fukui, Fukui, Japan), Yoshikazu Maegawa, Haruki Taniguchi (Hokukon Co., Ltd., Fukui, Japan) AJTEC2011-44144 Field Experiment on Top Heat Thermosyphone, Hiro Yoshida, Naoto Hagino, Erkata Yandri (Kanagawa Institute of Technology, Atsugi, Kanagawa, Japan) AJTEC2011-44043 A Numerical Algorithm and a Graphical Method to Size a Heat Exchanger, Torsten Berning (Aalborg University, Aalborg, Denmark)
Room: Milo III 15:20-16:40, Thursday, March 17 2-4-8 Heat and Mass Transfer in Energy Devices VIII - Heat & Mass Transfer in Energy Systems - Session Organizer: Takuto Araki (Yokohama National University, Yokohama, Japan) Session Co-Organizer: Wojciech Lipinski (University of Minnesota, Minneapolis, MN, United States) AJTEC2011-44399 New Thermal Management Systems for Data Centers, Mayumi Ouchi, Yoshiyuki Abe (AIST, Tsukuba, Ibaraki, Japan), Masato Fukagaya (SOHKi Co., Ltd., Nagoya, Japan), Takashi Kitagawa (Kawamura Electric Inc., Seto, Japan), Haruhiko Ohta, Yasuhisa Shinmoto (Kyushu University, Fukuoka, Japan), Masahide Sato, Ken-ichi Iimura (Utsunomiya University, Utsunomiya, Japan) AJTEC2011-44095 Variable Pressure Humidification Dehumidification Desalination System, G. Prakash Narayan, Ronan K. McGovern, John H. Lienhard V (Massachusetts Institute of Technology, Cambridge, MA, United States), Syed M. Zubair (King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia) AJTEC2011-44255 Numerical and Experimental Research in Heat Transfer to Screw Compressor Rotors, Nikola Stosic, Ian K Smith, Ahmed Kovacevic (City University, London, SEMS, London, United Kingdom)
Track 3: Micro/Nano Scale Phenomena Track Chair: Shigeo Maruyama (The University of Tokyo, Tokyo, Japan) Track Co-Chair: Taku Ohara (Tohoku University, Sendai, Japan) Track Co-Chair: Leslie Phinney (Sandia National Laboratories, Albuquerque, NM, United States) Track Co-Chair: Alexis Abramson (Case Western Reserve University, Cleveland, OH, United States)
56 Room: Kona Moku A 10:40-12:00, Thursday, March 17 3-2-8 Nanoscale Transport Phenomena during Thermal Conduction - 2 Session Organizer: Baratunde Cola (Georgia Institute of Technology, Atlanta, GA, United States) Session Co-Organizer: Koji Takahashi (Kyushu University, Fukuoka, Japan) AJTEC2011-44012 Phonon Scattering in Bi2Te3/Sb2Te3 Superlattice, Yaguo Wang, Xianfan Xu (Purdue University, West Lafayette, IN, United States), Rama Venkatasubramanian (RTI International, Research Triangle Park, NC, United States)
AJTEC2011-44173 Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 Thermal Conductivity of Carbon Nanotubes with Defects, Haibin Chen, Alan McGaughey (Carnegie Mellon University, Pittsburgh, PA, United States) AJTEC2011-44540 Thermal Transport in Few-Quintuple Bi2Te3 Thin Films and Nanoribbons, Bo Qiu, Xiulin Ruan (Purdue University, West Lafayette, IN, United States)
Room: Kona Moku A 13:40-15:00, Thursday, March 17 3-2-9 Transport Phenomena in Nanomaterial Synthesis - 1 Session Organizer: Masahiko Shibahara (Osaka University, Osaka, Japan) Session Co-Organizer: Alexis Abramson (Case Western Reserve University, Cleveland, OH, United States) AJTEC2011-44193 Possible Growth Region of Single-Walled Carbon Nanotube in CVD Synthsis on the CHO Components Diagram, Shuhei Inoue, Takashi Tomie, Yukihiko Matsumura (Hiroshima University, Higashi-Hiroshima, Japan), Masamichi Kohno (Kyushu University, Fukuoka, Japan) AJTEC2011-44414 Carbon Nanotube Synthesis from Size Classified Metal Nano-Particles by a Differential Mobility Analyzer, Masahiro Tomoda, Teppei Kawahara, Yohei Tasaki, Yasuyuki Takata (Kyushu University, Fukuoka, Japan), Makoto Hirasawa (National Institute of Advanced Industrial Science and Technology, Tsukuba, Japan), Takafumi Seto (Kanazawa University, Kanazawa, Japan), Masamichi Kohno (Kyushu University, Fukuoka, Japan) AJTEC2011-44257 Synthesis of Single-Walled Carbon Nanotube Containing Platinum Group Metal, Kyohei Ito, Shuhei Inoue, Yukihiko Matsumura (Hiroshima University, Higashi-Hiroshima, Japan)
Room: Kona Moku A 15:20-16:40, Thursday, March 17 3-2-10 Transport Phenomena in Nanomaterial Synthesis - 2 Session Organizer: Shuhei Inoue (Hiroshima University, Higashi-Hiroshima, Japan) Session Co-Organizer: Xinwei Wang (Iowa State University, Ames, IA, United States) AJTEC2011-44543 Effect of the Residence Time in High Temperature Reaction Field on the Fullerene and PAH Formation Mechanism, Tatsuya Saika, Youhei Sakita, Masahiko Shibahara (Osaka University, Osaka, Japan) AJTEC2011-44554 Fabrication of Thermoelectric La0.95Sr0.05CoO3 Thin Film and Seebeck Coefficient Measurement, Weihe Xu, Qi Chen, Hamid Hadim, Yong Shi (Stevens Institute of Technology, Hoboken, NJ, United States) AJTEC2011-44556 Size Control of Hollow Polylactic Acid Microcapsules and Hollow Polyelectrolyte Microcapsules in Bubble Template Method, Jay J. Molino (The University of Tokyo, Chiba, Japan), Fumio Takemura (National Institute of Advanced Industrial Science and Technology, Tsukuba, Ibaraki, Japan), Hirofumi Daiguji (The University of Tokyo, Chiba, Japan)
57 Room: Milo IV&V 10:40-12:00, Thursday, March 17 3-1-7 Bubbles and Liquid-Vapor Interfaces Session Organizer: Manohar Sohal (Idaho National Laboratory, Idaho Falls, ID, United States) Session Co-Organizer: Yuji Nagasaka (Keio University, Yokohama, Japan) AJTEC2011-44397 MD-CFD Hybrid Simulation for Microbubble Dynamics, Ryo Nabika, Mitsuhiro Matsumoto (Kyoto University, Kyoto, Japan) AJTEC2011-44435
Initial Stage of Nucleate Boiling at Atomic Scale, Mitsuhiro Matsumoto, Takahiro Yamamoto (Kyoto Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 University, Kyoto, Japan) AJTEC2011-44188 Molecular Dynamics Simulation of Vapor Bubble Nucleation in 2D Lennard-Jones Fluid Along Nanometer-Sized Cavities, Joseph Johnston, III, R. Panneer Selvam (University of Arkansas, Fayetteville, AR, United States)
Room: Milo IV&V 13:40-15:00, Thursday, March 17 3-1-4 Wetting and Drying Session Organizer: Gota Kikugawa (Tohoku University, Sendai, Japan) Session Co-Organizer: Manohar Sohal (Idaho National Laboratory, Idaho Falls, ID, United States) AJTEC2011-44168 Dryout Studies of Carbon Nanotube Bi-Porous Structure, Qingjun (Steve) Cai, Ya-chi Chen, Chung-Lung Chen (Teledyne Scientific, Thousand Oaks, CA, United States) AJTEC2011-44650 Fractal Aggregation Simulation in the Nanofluid Drying, Fei Duan, A. Crivoi (School of Mechanical and Aerospace Engineering, Singapore, Singapore) AJTEC2011-44358 Thermo-Wetting and Friction Reduction Characterization of Microtextured Superhydrophobic Surfaces, Tae Jin Kim, Philip Glass, Carlos Hidrovo (The University of Texas at Austin, Austin, TX, United States)
Room: Milo IV&V 15:20-16:40, Thursday, March 17 3-1-5 Measurement of Nanoscale Transport Phenomena Session Organizer: Patrick Hopkins (Sandia National Labs, Albuquerque, NM, United States) Session Co-Organizer: Yuji Nagasaka (Keio University, Yokohama, Japan) AJTEC2011-44553 Thermal Conductivity Measurement of Vertically Aligned Single-Walled Carbon Nanotubes Utilizing Temperature Dependence of Raman Scattering, Kei Ishikawa, Shohei Chiashi, Saifullah Badar, Theerapol Thurakitseree, Takuma Hori, Rong Xiang, Makoto Watanabe, Jun-ichiro Shiomi, Shigeo Maruyama (The University of Tokyo, Tokyo, Japan) AJTEC2011-44110 A Modified 3-Omega Technique to Measure Thermal Conductivity in Liquids, Gases, and Powders, Scott N. Schiffres, Jonathan A. Malen (Carnegie Mellon University, Pittsburgh, PA, United States) AJTEC2011-44260 Identification of Nucleobases of Single Stranded DNA by Nanopore Force Resolution at Different Film Thickness, Tatiana Zolotoukhina, Takeo Fukui (Toyama University, Toyama, Japan)
58 Closing Remarks
Room: Kona Moku 17:00-17:20, Thursday, March 17 Session Organizer: Isao Satoh (Tokyo Institute of Technology, Tokyo, Japan)
Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021
59 Committe Meetings
The following committee meetings are scheduled during the conference. All the meeting rooms are located on the second floor of the Paoakalani Tower.
Sunday, March 13 Group Time Room
ASME 75th Anniversary of HTD 12:00 noon - 2:00 pm Milo I Downloaded from http://asmedigitalcollection.asme.org/AJTEC/proceedings-pdf/AJTEC2011/38921/B10001/4599965/b10001_1.pdf by guest on 27 September 2021 ASME Executive Committee Closed Session 1:00 - 3:30 pm Milo II ASME Executive Committee Open Session 3:30 - 5:00 pm Milo II
Monday, March 14 Group Time Room ASME K-6 Heat Transfer in Energy Systems 5:00 - 7:00 pm Milo II ASME K-8 Theory and Fundamental Research 3:00 - 5:00 pm Milo I ASME K-10 Heat Transfer Equipment 3:00 - 5:00 pm Milo II ASME K-11 Fire and Combustion 5:00 - 7:00 pm Milo Boardroom ASME K-12 Aerospace Heat Transfer 5:00 - 7:00 pm Milo I
Tuesday, March 15 Group Time Room ASME 2011 Summer Heat Transfer Conference Planning 3:00 - 5:00 pm Milo I ASME Journal of Heat Transfer 3:00 - 5:00 pm Milo II ASME K-3 Honors and Awards 5:00 - 7:00 pm Milo II ASME K-13 Heat Transfer in Multiphase Systems 5:00 - 7:00 pm Milo I ASME K-15 Transport Phenomena in Manufacturing and 3:00 - 5:00 pm Milo Boardroom Materials Processing ASME K-20 Computational Heat Transfer 5:00 - 7:00 pm Milo Boardroom
Wednesday, March 16 Group Time Room 2015 AJTEC Planning 3:00 - 5:00 pm Milo I ASME 2011 IMECE Planning 1:00 - 3:00 pm Milo I ASME K-2 Long Range Directions & Issues in Heat Transfer 1:00 - 3:00 pm Milo II ASME K-17 Heat and Mass Transfer in Biotechnology 5:00 - 7:00 pm Milo II ASME K-19 Environmental Heat Transfer 3:00 - 5:00 pm Milo II ASME K-21 Education 5:00 - 7:00 pm Milo Boardroom ASME K-22 Visualization of Heat Transfer 5:00 - 7:00 pm Milo I
Thursday, March 17 Group Time Room JSME TED Committee Meeting (closed) 11:30 am - 1:30 pm Milo II ASME K-5 Coordinating Committee 1:00 - 2:30 pm Milo I
60