DOCSLIB.ORG

APP Release 5.1 Lbp8iiitpc850/BM3

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
APP Release 5.1 Lbp8iiitpc850/BM3 APP Release 5.1 LBP8IIITpc850/BM3/ Supported Printer Specification Manufacturer Canon Model LBP-8 Mk IIIT Cartridge(s)/Card(s) installed BM-3 Uniplex "Pcap" names LBP8IIITpc850/BM3/ L/LBP8IIITpc850/BM3/ Paper orientation (Portrait/Landscape/Both) Both General FacilitiesFacilities Bin Selection (No/Yes/YES/Not-tested) YES Duplex Control (No/Yes/YES/Not-tested) Yes High Resolution printing (YES/No) YES Local copy (No/YES) YES Box Graphics (No/YES/Fixed-pitch-only) YES Fill method (Characters/Patterns/Both) PATTERNS £ - Pound Sterling (No/YES/Fixed-font) YES Change Bars (No/YES) No Portrait PaperPaper SizesSizes Physical Size Uniplex Printer’s Lines Unprintable Inches Inches mm name name per Page Top. Bot. Left Right 81/4x113/4 210x297 A4 A4 66 0.33 0.33 0.2 0.3 81/2x11 216x279 8x11 LTR 62 0.33 0.33 0.2 0.3 Landscape PaperPaper SizesSizes Physical Size Uniplex Printer’s Lines Unprintable Inches Inches mm name name per Page Top Bot. Left Right 113/4x81/4 297x210 A4 A4 44 0.33 0.5 0.2 0.2 11x81/2 279x216 8x11 LTR 46 0.33 0.5 0.2 0.2 Uniplex Business Software sps51 Page 1 APP Release 5.1 LBP8IIITpc850/BM3/ Pre-defined FontsFonts Uniplex Manufacturer’s Point Name Name Common Name Size Pitch NORMAL Dutch Times 12 Prop. BOLD Dutch Bold Times Bold 12 Prop. ITALIC Dutch Oblique Times Italic 12 Prop. SMALL Dutch Times 6 Prop. LARGE Dutch Times 16 Prop. FX-SMALL Courier Courier 8 15 PS-SMALL - same as SMALL - FX-NORMAL Courier Courier 12 10 PS-NORMAL - same as NORMAL - HSMALL Swiss Helvetica 6 Prop. HNORMAL Swiss Helvetica 12 Prop. HBOLD Swiss Bold Helvetica Bold 12 Prop. HITALIC Swiss Oblique Helvetica Italic 12 Prop. HLARGE Swiss Helvetica 16 Prop. Dialogue BoxBox FontsFonts Uniplex Manufacturer’s Point Name Name Common Name sizes Times NORMAL Dutch Times Normal 1-128 Times BOLD Dutch Bold Times Bold 1-128 Times ITALIC Dutch Oblique Times Italic 1-128 Times BOLD ITALIC Dutch BoldOblique Times Bold Italic 1-128 Helvetica NORMAL Swiss Helvetica Normal 1-128 Helvetica BOLD Swiss Bold Helvetica Bold 1-128 Helvetica ITALIC Swiss Oblique Helvetica Italic 1-128 Helvetica BOLD ITALIC Swiss BoldOblique Helvetica Bold Italic 1-128 Courier NORMAL Courier Courier 7, 8, 12 Courier BOLD Courier Bold Courier Bold 12 Courier Italic Courier Oblique Courier Italic 12 Elite NORMAL* Elite Elite 8, 12 Elite BOLD* Elite Bold Elite Bold 12 Elite ITALIC* Elite Italic Elite Oblique 12 Pica NORMAL* Pica Pica 8, 12 Pica BOLD* Pica Bold Pica Bold 12 Pica ITALIC* Pica Italic Pica Italic 12 LinePrinter NORMAL* Lineprinter Lineprinter 8 Garland NORMAL* Garland Garland 8, 12 Garland BOLD* Garland Bold Garland Bold 12 Garland ITALIC* Garland Italic Garland Italic 12 *Not standard in Uniplex V7.0x product dialogue box, needs to be added to standard typeface definitions. Uniplex Business Software sps51 Page 2 APP Release 5.1 LBP8IIITpc850/BM3/ Uniplex extendedextended character set Decimal Value(s) Character(s) Details 161-255 Full Set Available in all fonts Uniplex EffectsEffects Effect Letter Description Notes A Doublestrike Small shadow effect used B BOLD font C Underline all D Underline Text E BOLD & underline J Superscript K Subscript M Double underline N Double underline text T Shaded overstrike U Strikeout slash Shaded boxing effect V Strikeout dash Overlaid line draw effect used X Index leader effect Dotted line draw effect used G SMALL font See Pre-defined Fonts above. H LARGE font - ditto - I ITALIC font - ditto - O PS-SMALL font - ditto - P PS-NORMAL font - ditto - Q FX-SMALL font - ditto - R FX-NORMAL font - ditto - S NORMAL font - ditto - F Outlined and filled Can be applied to any font L Outlined, shadowed and filled W White on black leaves thin vertical white line Y Outlined and shadowed Z Outlined Uniplex Business Software sps51 Page 3 APP Release 5.1 LBP8IIITpc850/BM3/ Print TimeTime DirectivesDirectives Directive Name Details UPPER Selects the Upper Paper Feeder Tray LOWER Selects the Lower Paper Feeder Tray MANUAL Printer requests manual feeding of paper ENVELOPE Selects the automatic envelope feeder DUPLONG Duplex mode with long edge binding DUPSHORT Duplex mode with short edge binding DUPLEX Duplex mode with long edge binding DUPON Duplex mode with long edge binding SIMPLEX Normal Simplex mode (single sided) DUPOFF Normal Simplex mode (single sided) Printer HardwareHardware SpecificationSpecification andand Set-Up Not available, tested on an LBP-8IIIR. Uniplex Business Software sps51 Page 4.
Load more

Recommended publications
  • Bit-Mapped Fonts
    PRINTING METHOD 24-pin, impact dot matrix PAPER FEED Convertible push/pull tractor for rear, front and MECHANISM bottom feed; automatic fanfold paper load; auto- PRINT DIRECTION Bidirectional with logic seeking in text and graphics modes matic single sheet, paper stacking; friction feed; top and front automatic single sheet load; Advanced PRINT SPEED High speed draft: 225 cps (10 cpi) Paper Handling: micro-adjustment for top-of- (Bit-mapped fonts) Draft: 315 cps (15 cpi) form and tear-off mode, paper parking for loading 252 cps (12 cpi) single sheet paper without removing continuous 210 cps (10 cpi) paper; optional: additional pull tractor, standard- Letter quality: 105 cps (15 cpi) capacity cut sheet feeder and high-capacity cut 84 cps (12 cpi) sheet and envelope feeder 70 cps (10 cpi) PAPER FEED SPEED 77.6 milliseconds per 1/6" line spacing; CHARACTER MATRIX 9 x 22 draft mode (10 cpi) 2.2” per second continuous feed (Bit-mapped fonts) 31 x 22 letter-quality mode (10 cpi) 22 x 16 letterquality mode (15 cpi) PAPER HANDLING 37 x 22 proportional Single sheets: Top loading: 5.8” to 16.5” CHARACTER SETS 96 ASCII characters; 15 international Front, loading: 7.2” to 14.3” character sets; 128 user-defined ® Continuous: 4.0” to 16.0” characters; extended IBM -style No. 6 envelopes: 6.5” x 3.625” graphics characters: legal charac- No. 10 envelopes: 9.5” x 4.125” ters; 5-code pages Labels: 2.5” x 5.9” SCALABLE FONTS Epson Roman 8 to 32 points Forms: Continuous multi-part, original plus three carbon- Epson Sans Serif 8 to 32 points less copies; maximum thickness 0.012 inches RESIDENT Epson Draft 10, 12.
    [Show full text]
  • Agenda for the Regular Business Meeting of the Council of West Windsor Township 271 Clarksville Road to the Extent Known
    MEETING TO BE BROADCAST ON COMCAST CHANNEL 27 AND VERIZON CHANNELS 41 AND 42 AGENDA FOR THE REGULAR BUSINESS MEETING OF THE COUNCIL OF WEST WINDSOR TOWNSHIP 271 CLARKSVILLE ROAD TO THE EXTENT KNOWN June 26, 2017 7:00 p.m. 1. Call to Order 2. Statement of Adequate Notice – January 6, 2017 to the Trenton Times and the Princeton Packet. 3. Salute to the Flag 4. Ceremonial Matters and/or Topics for Priority Consideration Recognition of Chief Joe Pica for his Years of Service to West Windsor Township Filling of Council Vacancy Filling of the Environmental Commission Liaison Route 1 Concept Plan Presentation Presentation from Mercer County – Rt. 571 and Clarksville Intersection Improvements 5. Public Comment: (30 minutes comment period; 3-minute limit per person) (1) 6. Administration Comments 7. Council Member Comments 8. Chair/Clerk Comments 9. Public Hearings 2017-23 AN ORDINANCE AUTHORIZING THE ACQUISITION OF A TEMPORARY CONSTRUCTION EASEMENT FROM ELISABETH LINDA LOUISE MIHAN LOCATED AT BLOCK 5, LOT 39 – 43 Cranbury Road 2017-24 AN ORDINANCE AMENDING THE CODE OF THE TOWNSHIP OF WEST WINDSOR, CHAPTER 168, “TRAFFIC AND PARKING” ARTICLE VI, “PARKING AUTHORITY PROPERTY” AND ARTICLE VII, “SCHEDULES” 10. Consent Agenda A. Resolutions 2017-R170 Appointing Jill M. Swanson and Eileen Lang as Alternate Deputy Registrars 2017-R171 Appointing James Yates, Manager of Fire and Emergency Services as Emergency Management Coordinator and Incoming Chief Garofalo as Deputy Emergency Management Coordinator for the Term of Three Years 2017-R172 Authorizing the Insertion of the State of New Jersey Clean Communities Program in the 2017 Municipal Budget - $59,059.86 (2) 2017-R173 Authorizing the Insertion of the Alcoholic Rehabilitation & Enforcement Fund in the 2017 Municipal Budget - $4,503.79 B.
    [Show full text]
  • Variable First
    Variable first Baptiste Guesnon Designer & Design Technologist at Söderhavet A small text Text with hyphen- ation Gulliver, Gerard Unger, 1993 Screens are variable first Static units Relative units Pica, type points, %, viewport width, pixels, cm… viewport height Why should type be static… …while writing is organic? Century Expanded plomb from 72 pt to 4 pt and putted at a same scale Image by Nick Sherman Through our experience with traditional typesetting methods, we have come to expect that the individual letterforms of a particular typeface should always look the same. This notion is the result of a technical process, not the other way round. However, there is no technical reason for making a digital letter the same every time it is printed. Is Best Really Better, Erik van Blokland & Just van Rossum First published in Emigre magazine issue 18, 1990 Lettering ? Typography Potential of variations in shape a same letter [————— 500 years of type technology evolution —————] Metal / Ink / Paper / Punch & Counterpunch / Pantograph / Linotype & Monotype / etc. Opentype Gutenberg Postscript Photocompo. Variable Fonts Change is the rule in the computer, stability the exception. Jay David Bolter, Writing Space, 1991 Fedra outlines, Typotheque Metafont Postscript Truetype GX Opentype 1.8 (Variable Fonts) Multiple Master Ikarus Fonts HZ Program Webfont Opentype (.woff) Now 1970 1975 1980 1985 1990 1995 2000 2005 2010 Punk/Metafont Beowolf Digital Lettering Donald Knuth Letteror Letteror 1988 1995 2015 HZ-program Indesign glyph scaling glyph scaling Skia, Matthew Carter for Mac OS, 1993 How to make it work? The Stroke, Gerrit Noordzij, 1985 Metafont book, Donald Knuth Kalliculator, 2007, Frederik Berlaen Beowolf, Letteror, 1995 Parametric fonts ≠ Variable fonts Designing instances vs.
    [Show full text]
  • Type Design for Typewriters: Olivetti by María Ramos Silva
    Type design for typewriters: Olivetti by María Ramos Silva Dissertation submitted in partial fulfilment of the requirements for the MA in Typeface Design Department of Typography & Graphic Communication University of Reading, United Kingdom September 2015 The word utopia is the most convenient way to sell off what one has not the will, ability, or courage to do. A dream seems like a dream until one begin to work on it. Only then it becomes a goal, which is something infinitely bigger.1 -- Adriano Olivetti. 1 Original text: ‘Il termine utopia è la maniera più comoda per liquidare quello che non si ha voglia, capacità, o coraggio di fare. Un sogno sembra un sogno fino a quando non si comincia da qualche parte, solo allora diventa un proposito, cio è qualcosa di infinitamente più grande.’ Source: fondazioneadrianolivetti.it. -- Abstract The history of the typewriter has been covered by writers and researchers. However, the interest shown in the origin of the machine has not revealed a further interest in one of the true reasons of its existence, the printed letters. The following pages try to bring some light on this part of the history of type design, typewriter typefaces. The research focused on a particular company, Olivetti, one of the most important typewriter manufacturers. The first two sections describe the context for the main topic. These introductory pages explain briefly the history of the typewriter and highlight the particular facts that led Olivetti on its way to success. The next section, ‘Typewriters and text composition’, creates a link between the historical background and the machine.
    [Show full text]
  • Guide for the Use of the International System of Units (SI)
    Guide for the Use of the International System of Units (SI) m kg s cd SI mol K A NIST Special Publication 811 2008 Edition Ambler Thompson and Barry N. Taylor NIST Special Publication 811 2008 Edition Guide for the Use of the International System of Units (SI) Ambler Thompson Technology Services and Barry N. Taylor Physics Laboratory National Institute of Standards and Technology Gaithersburg, MD 20899 (Supersedes NIST Special Publication 811, 1995 Edition, April 1995) March 2008 U.S. Department of Commerce Carlos M. Gutierrez, Secretary National Institute of Standards and Technology James M. Turner, Acting Director National Institute of Standards and Technology Special Publication 811, 2008 Edition (Supersedes NIST Special Publication 811, April 1995 Edition) Natl. Inst. Stand. Technol. Spec. Publ. 811, 2008 Ed., 85 pages (March 2008; 2nd printing November 2008) CODEN: NSPUE3 Note on 2nd printing: This 2nd printing dated November 2008 of NIST SP811 corrects a number of minor typographical errors present in the 1st printing dated March 2008. Guide for the Use of the International System of Units (SI) Preface The International System of Units, universally abbreviated SI (from the French Le Système International d’Unités), is the modern metric system of measurement. Long the dominant measurement system used in science, the SI is becoming the dominant measurement system used in international commerce. The Omnibus Trade and Competitiveness Act of August 1988 [Public Law (PL) 100-418] changed the name of the National Bureau of Standards (NBS) to the National Institute of Standards and Technology (NIST) and gave to NIST the added task of helping U.S.
    [Show full text]
  • ANSI® Programmer's Reference Manual Line Matrix Series Printers
    ANSI® Programmer’s Reference Manual Line Matrix Series Printers Printronix, LLC makes no representations or warranties of any kind regarding this material, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. Printronix, LLC shall not be held responsible for errors contained herein or any omissions from this material or for any damages, whether direct, indirect, incidental or consequential, in connection with the furnishing, distribution, performance or use of this material. The information in this manual is subject to change without notice. This document contains proprietary information protected by copyright. No part of this document may be reproduced, copied, translated or incorporated in any other material in any form or by any means, whether manual, graphic, electronic, mechanical or otherwise, without the prior written consent of Printronix, LLC Copyright © 1998, 2012 Printronix, LLC All rights reserved. Trademark Acknowledgements ANSI is a registered trademark of American National Standards Institute, Inc. Centronics is a registered trademark of Genicom Corporation. Dataproducts is a registered trademark of Dataproducts Corporation. Epson is a registered trademark of Seiko Epson Corporation. IBM and Proprinter are registered trademarks and PC-DOS is a trademark of International Business Machines Corporation. MS-DOS is a registered trademark of Microsoft Corporation. Printronix, IGP, PGL, LinePrinter Plus, and PSA are registered trademarks of Printronix, LLC. QMS is a registered
    [Show full text]
  • Typographic Terms Alphabet the Characters of a Given Language, Arranged in a Traditional Order; 26 Characters in English
    Typographic Terms alphabet The characters of a given language, arranged in a traditional order; 26 characters in English. ascender The part of a lowercase letter that rises above the main body of the letter (as in b, d, h). The part that extends above the x-height of a font. bad break Refers to widows or orphans in text copy, or a break that does not make sense of the phrasing of a line of copy, causing awkward reading. baseline The imaginary line upon which text rests. Descenders extend below the baseline. Also known as the "reading line." The line along which the bases of all capital letters (and most lowercase letters) are positioned. bleed An area of text or graphics that extends beyond the edge of the page. Commercial printers usually trim the paper after printing to create bleeds. body type The specific typeface that is used in the main text break The place where type is divided; may be the end of a line or paragraph, or as it reads best in display type. bullet A typeset character (a large dot or symbol) used to itemize lists or direct attention to the beginning of a line. (See dingbat.) cap height The height of the uppercase letters within a font. (See also cap line.) caps and small caps The typesetting option in which the lowercase letters are set as small capital letters; usually 75% the height of the size of the innercase. Typographic Terms character A symbol in writing. A letter, punctuation mark or figure. character count An estimation of the number of characters in a selection of type.
    [Show full text]
  • INTERNATIONAL TYPEFACE CORPORATION, to an Insightful 866 SECOND AVENUE, 18 Editorial Mix
    INTERNATIONAL CORPORATION TYPEFACE UPPER AND LOWER CASE , THE INTERNATIONAL JOURNAL OF T YPE AND GRAPHI C DESIGN , PUBLI SHED BY I NTE RN ATIONAL TYPEFAC E CORPORATION . VO LUME 2 0 , NUMBER 4 , SPRING 1994 . $5 .00 U .S . $9 .90 AUD Adobe, Bitstream &AutologicTogether On One CD-ROM. C5tta 15000L Juniper, Wm Utopia, A d a, :Viabe Fort Collection. Birc , Btarkaok, On, Pcetita Nadel-ma, Poplar. Telma, Willow are tradmarks of Adobe System 1 *animated oh. • be oglitered nt certain Mrisdictions. Agfa, Boris and Cali Graphic ate registered te a Ten fonts non is a trademark of AGFA Elaision Miles in Womb* is a ma alkali of Alpha lanida is a registered trademark of Bigelow and Holmes. Charm. Ea ha Fowl Is. sent With the purchase of the Autologic APS- Stempel Schnei Ilk and Weiss are registimi trademarks afF mdi riot 11 atea hmthille TypeScriber CD from FontHaus, you can - Berthold Easkertille Rook, Berthold Bodoni. Berthold Coy, Bertha', d i i Book, Chottiana. Colas Larger. Fermata, Berthold Garauannt, Berthold Imago a nd Noire! end tradematts of Bern select 10 FREE FONTS from the over 130 outs Berthold Bodoni Old Face. AG Book Rounded, Imaleaa rd, forma* a. Comas. AG Old Face, Poppl Autologic typefaces available. Below is Post liedimiti, AG Sitoploal, Berthold Sr tapt sad Berthold IS albami Book art tr just a sampling of this range. Itt, .11, Armed is a trademark of Haas. ITC American T}pewmer ITi A, 31n. Garde at. Bantam, ITC Reogutat. Bmigmat Buick Cad Malt, HY Bis.5155a5, ITC Caslot '2114, (11 imam.
    [Show full text]
  • 2.1 Typography
    Working With Type FUN ROB MELTON BENSON POLYTECHNIC HIGH SCHOOL WITH PORTLAND, OREGON TYPE Points and picas If you are trying to measure something very short or very thin, then inches are not precise enough. Originally English printers devised picas to precisely measure the width of type and points to precise- ly measure the height of type. Now those terms are used interchangeably. There are 12 points in one pica, 6 picas in one inch — or 72 points in one inch. This is a 1-point line (or rule). 72 of these would be one inch thick. This is a 12-point rule. It is 1 pica thick. Six of these would be one inch thick. POINTS PICAS INCHES Thickness of rules I Lengths of rules Lengths of stories I Sizes of type (headlines, text, IWidths of text, photos, cutlines, IDepths of photos and ads cutlines, etc.) gutters, etc. (though some publications use IAll measurements smaller than picas for photo depths) a pica. Type sizes Type is measured in points. Body type is 7–12 point type, while display type starts at 14 point and goes to 127 point type. Traditionally, standard point sizes are 14, 18, 24, 30, 36, 42, 48, 54, 60 and 72. Using a personal computer, you can create headlines in one-point increments beginning at 4 point and going up to 650 point. Most page designers still begin with these standard sizes. The biggest headline you are likely to see is a 72 pt. head and it is generally reserved for big stories on broadsheet newspapers.
    [Show full text]
  • LG Programmer’S Reference Manual
    LG Programmer’s Reference Manual Line Matrix Series Printers Trademark Acknowledgements ANSI is a registered trademark of American National Standards Institute, Inc. Code V is a trademark of Quality Micro Systems. Chatillon is a trademark of John Chatillon & Sons, Inc. Ethernet is a trademark of Xerox Corporation. IBM is a registered trademark of International Business Machines Corporation. IGP is a registered trademark of Printronix, LLC. Intelligent Printer Data Stream and IPDS are trademarks of International Business Machines Corporation. LinePrinter Plus is a registered trademark of Printronix, LLC. MS-DOS is a registered trademark of Microsoft Corporation. PC-DOS is a trademark of International Business Machines Corporation. PGL is a registered trademark of Printronix, LLC. PrintNet is a registered trademark of Printronix, LLC. Printronix is a registered trademark of Printronix, LLC. PSA is a trademark of Printronix, LLC. QMS is a registered trademark of Quality Micro Systems. RibbonMinder is a trademark of Printronix, LLC. Torx is a registered trademark of Camcar/Textron Inc. Utica is a registered trademark of Cooper Power Tools. Printronix, LLC. makes no representations or warranties of any kind regarding this material, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. Printronix, LLC. shall not be held responsible for errors contained herein or any omissions from this material or for any damages, whether direct, indirect, incidental or consequential, in connection with the furnishing, distribution, performance or use of this material. The information in this manual is subject to change without notice. This document contains proprietary information protected by copyright. No part of this document may be reproduced, copied, translated or incorporated in any other material in any form or by any means, whether manual, graphic, electronic, mechanical or otherwise, without the prior written consent of Printronix, LLC.
    [Show full text]
  • Operating Manual Pica II
    PICA II Operating Manual Copyright by Carl Valentin GmbH / 7929055.0321 Information on the scope of delivery, appearance, performance, dimensions and weight reflect our knowledge at the time of printing. We reserve the rights to make modifications. All rights, including those regarding the translation, are reserved. No part of this document may be reproduced in any form (print, photocopy or any other method) or edited, copied or distributed electronically without written permission from Carl Valentin GmbH. Due to the constant further development of our devices discrepancies between manual and device can occur. Please check www.carl-valentin.de for the latest update. Trademarks All named brands or trademarks are registered brands or registered trademarks of their respective owners and may not be separately labelled. It must not be concluded from the missing labelling that it is not a registered brand or a registered trademark. Carl Valentin label printers comply with the following safety guidelines: CE Low-Voltage Directive (2014/35/EU) Electromagnetic Compatibility Directive (2014/30/EU) Carl Valentin GmbH Postfach 3744 78026 Villingen-Schwenningen Neckarstraße 78 – 86 u. 94 78056 Villingen-Schwenningen Phone +49 7720 9712-0 Fax +49 7720 9712-9901 E-Mail [email protected] Internet www.carl-valentin.de Pica II Table of Contents Table of Contents 1 Introduction ......................................................................... 5 1.1 General Instructions .............................................................. 5 1.2 Intended
    [Show full text]
  • Base Monospace
    SPACE PROBE: Investigations Into Monospace Introducing Base Monospace Typeface BASE MONOSPACE Typeface design 1997ZUZANA LICKO Specimen design RUDY VANDERLANS Rr SPACE PROBE: Investigations into Monospace SPACE PROBE: Occasionally, we receive inquiries from type users asking Monospaced Versus Proportional Spacing Investigations Into Monospace us how many kerning pairs our fonts contain. It would seem 1. that the customer wants to be dazzled with numbers. Like cylinders in a car engine or the price earnings ratio of a /o/p/q/p/r/s/t/u/v/w/ Occasionally, we receive inquiries fromstock, type theusers higher asking the number of kerning pairs, the more us how many kerning pairs our fonts contain.impressed It thewould customer seem will be. What they fail to understand /x/y/s/v/z/t/u/v/ that the customer wants to be dazzled iswith that numbers. the art Like of kerning a typeface is as subjective a discipline as is the drawing of the letters themselves. The In a monospaced typeface, such as Base Monospace, cylinders in a car engine or the price earnings ratio of each character fits into the same character width. a stock, the higher the number of kerningfact pairs,that a theparticular more typeface has thousands of kerning impressed the customer will be. What theypairs fail is relative,to understand since some typefaces require more kerning is that the art of kerning a typeface pairsis as thansubjective others aby virtue of their design characteristics. /O/P/Q/O/Q/P/R/S/Q/T/U/V/ discipline as is the drawing of the lettersIn addition, themselves.
    [Show full text]