DOCSLIB.ORG

Vehicle Information SELECTED MODEL

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Vehicle Information SELECTED MODEL 2009 Nissan Versa 5dr HB CVT SL (52319) Prepared By: Florida Department of Management Services, Division of State Purchasing Vehicle Information SELECTED MODEL Code Description 52319 2009 Nissan Versa 5dr HB CVT SL SELECTED VEHICLE COLORS SELECTED OPTIONS Code Description 50S [C03] 50 STATE EMISSIONS ___ STANDARD PAINT All prices and specifications are subject to change without notice. Prices do not include sales tax, vehicle registration fees, finance charges, documentation charges, or other fees required by law. Dealer invoice prices do not include dealer charges, such as advertising charges, that can vary by manufacturer or region. 2009 Nissan Versa 5dr HB CVT SL (52319) Prepared By: Florida Department of Management Services, Division of State Purchasing Standard Equipment MECHANICAL 1.8L DOHC 16-valve CVTCS I4 engine Electronically controlled drive-by-wire throttle Xtronic continuously variable transmission Transmission shift interlock Front wheel drive Battery saver Independent strut front suspension w/stabilizer bar Torsion beam rear suspension w/stabilizer bar 15" aluminum alloy wheels P185/65R15 all-season tires Compact spare tire Electric speed-sensitive variable-assist pwr steering Pwr front vented disc/rear drum brakes EXTERIOR Body color bumpers Multi-reflector halogen headlamps Body color folding pwr mirrors Variable intermittent windshield wipers Intermittent rear wiper w/washer Body color door handles INTERIOR Reclining front bucket seats w/active adjustable headrests 6-way manual driver seat w/adjustable height 4-way manual adjustable passenger seat 60/40 split fold-down rear seat w/outboard adjustable headrests Woven cloth seat trim Soft-touch front center armrest w/storage Rear center armrest w/cup holder Dual front & rear cup holders Tilt steering column Immobilizer system Vehicle security system Tachometer Fasten seat belt warning light/chime Tire pressure monitoring system (TPMS) Pwr door locks Pwr windows w/driver side 1-touch up/down Remote keyless entry Cruise control w/steering wheel mounted controls Remote fuel lid release 2009 Nissan Versa 5dr HB CVT SL (52319) Prepared By: Florida Department of Management Services, Division of State Purchasing Pwr rear liftgate release AM/FM stereo w/in-dash 6-disc CD/MP3 player-inc: (6) speakers, auxiliary audio input jack, RDS, speed-sensitive volume, XM-ready Roof mounted antenna Air conditioning w/in-cabin microfilter Rear window defroster w/timer Illuminated glove box 12V pwr outlet Soft-touch door armrests, instrument panel, upper door trim Driver & front passenger map pockets Rear passenger map pockets Overhead storage console w/map light Dual visor vanity mirrors w/covers Front & rear passenger folding assist grips Carpeted floor & cargo area Cargo area lamp Cargo cover SAFETY Dual-stage front airbags w/occupant classification system Front side-impact airbags Front & rear side curtain airbags 3-point ELR driver seat belt w/pretensioner & load limiter 3-point ELR/ALR front passenger seat belt w/pretensioner & load limiter 3-point ELR/ALR rear seat belts at all positions Child safety rear door locks Passenger window lockout Rear child seat tether anchors (LATCH) Transmission shift interlock Energy absorbing steering column Slide-away brake pedal assembly Energy absorbing front/rear bumpers Steel side-door impact beams Zone body construction w/front/rear crumple zones, hood deformation point 2009 Nissan Versa 5dr HB CVT SL (52319) Prepared By: Florida Department of Management Services, Division of State Purchasing All Options Code Description MSRP Emission 50S [C03] 50 STATE EMISSIONS $0.00 Paint ___ STANDARD PAINT $0.00 Additional Options CNV [F01] CONVENIENCE PKG, -inc: Intelligent Key keyless entry & ignition system, Bluetooth hands- $650.00 free phone system, leather wrapped steering wheel w/audio controls SPT [S01] SPORT PKG, -inc: rear roof spoiler, lower body side extensions, unique front & rear fascias, $700.00 fog lamps, (REQ: J01 Moonroof Pkg) MRF [J01] MOONROOF PKG, -inc: pwr tilt/sliding sunroof w/sliding sunshade, dual illuminated visor $600.00 vanity mirrors, (REQ: H01 Audio Pkg, F01 Convenience Pkg) AUD [H01] AUDIO PKG, -inc: Rockford Fosgate pwr subwoofer, speaker upgrade, (REQ: A10 Satellite $300.00 Radio, J01 Moonroof Pkg) ABS [T01] ABS PKG, -inc: anti-lock braking system (ABS), electronic brake force distribution (EBD), $250.00 brake assist SAT [A10] XM SATELLITE RADIO, (REQ: H01 Audio Pkg) $150.00 SGD [B10] FRONT/REAR SPLASH GUARDS, (N/A w/S01 Sport Pkg) $110.00 SPL [R10] REAR ROOF SPOILER $250.00 Port Installed Options IPD [H94] IPOD INTERFACE SYSTEM, (REQ: A10 Satellite Radio), (PIO) $270.00 ORG [K92] CARGO ORGANIZER, (PIO) $160.00 FLO [L92] 5-PIECE FLOOR/TRUNK MAT SET, (N/A w/H01 Audio Pkg), (PIO) $155.00 FL2 [L93] 5-PIECE FLOOR/TRUNK MAT SET, (REQ: H01 Audio Pkg), (PIO) $155.00 MIR [N93] AUTO-DIMMING REARVIEW MIRROR, (PIO) $125.00 AMB [N94] INTERIOR ACCENT LIGHTING, (PIO) $300.00 AKP [P93] ALUMINUM KICK PLATE, (PIO) $130.00 All prices and specifications are subject to change without notice. Prices do not include sales tax, vehicle registration fees, finance charges, documentation charges, or other fees required by law. Dealer invoice prices do not include dealer charges, such as advertising charges, that can vary by manufacturer or region. 2009 Nissan Versa 5dr HB CVT SL (52319) Prepared By: Florida Department of Management Services, Division of State Purchasing Color Availability Color Code Description QM1 Exterior 1: Fresh Powder N/A G-2 Internal: Charcoal QM1 Exterior 1: Fresh Powder N/A C-2 Internal: Beige RAF Exterior 1: Arctic Blue N/A G-2 Internal: Charcoal A20 Exterior 1: Red Alert Metallic N/A G-2 Internal: Charcoal B14 Exterior 1: Sapphire Blue Metallic N/A G-2 Internal: Charcoal B17 Exterior 1: Blue Metallic N/A G-2 Internal: Charcoal B17 Exterior 1: Blue Metallic N/A C-2 Internal: Beige B23 Exterior 1: Blue Onyx Metallic N/A G-2 Internal: Charcoal B23 Exterior 1: Blue Onyx Metallic N/A C-2 Internal: Beige K23 Exterior 1: Brilliant Silver Metallic N/A G-2 Internal: Charcoal K36 Exterior 1: Magnetic Gray Metallic N/A G-2 Internal: Charcoal KH3 Exterior 1: Super Black Metallic N/A G-2 Internal: Charcoal KH3 Exterior 1: Super Black Metallic N/A C-2 Internal: Beige 2009 Nissan Versa 5dr HB CVT SL (52319) Prepared By: Florida Department of Management Services, Division of State Purchasing Warranty Information Basic: 3 Years/36,000 Miles Drivetrain: 5 Years/60,000 Miles 2009 Nissan Versa 5dr HB CVT SL (52319) Prepared By: Florida Department of Management Services, Division of State Purchasing Technical Specifications POWERTRAIN Transmission Drivetrain Front Wheel Drive Trans Order Code Trans Type 1 Trans Description Cont. Continuously Variable Trans Description Cont. Again First Gear Ratio (:1) 2.56-0.43 Reverse Ratio (:1) 2.69 Clutch Size Final Drive Axle Ratio (:1) 5.47 Mileage EPA Fuel Economy Est - City 27 (2008) MPG EPA Fuel Economy Est - Hwy 33 (2008) MPG Cruising Range - City 356.40 mi Cruising Range - Hwy 435.60 mi Engine Engine Order Code Engine Type Gas 4-cyl Displacement 1.8L/110 Fuel System NDIS SAE Net Horsepower @ RPM 122 @ 5200 SAE Net Torque @ RPM 127 @ 4800 Electrical Cold Cranking Amps @ 0° F (Primary) N/A Maximum Alternator Capacity (amps) N/A Cooling System Total Cooling System Capacity N/A qts VEHICLE EPA Classification Compact DIMENSIONS 2009 Nissan Versa 5dr HB CVT SL (52319) Prepared By: Florida Department of Management Services, Division of State Purchasing Interior Dimensions Passenger Capacity 5 Passenger Volume 94.7 ft³ Front Head Room 40.6 in Front Leg Room 41.4 in Front Shoulder Room 53.5 in Front Hip Room 48.8 in Second Head Room 38.3 in Second Leg Room 38.0 in Second Shoulder Room 50.7 in Second Hip Room 47.2 in Exterior Dimensions Wheelbase 102.4 in Length, Overall 169.1 in Width, Max w/o mirrors 66.7 in Height, Overall 60.4 in Tread Width, Front 58.3 in Tread Width, Rear 58.5 in Min Ground Clearance N/A in Liftover Height N/A in Cargo Area Dimensions Cargo Volume with Rear Seat Up 17.8 ft³ Cargo Volume with Rear Seat Down 50.4 ft³ Trunk Volume N/A ft³ CHASSIS Weight Information Base Curb Weight 2758 lbs Suspension Suspension Type - Front Independent Strut Suspension Type - Rear Torsion Beam Suspension Type - Front (Cont.) w/Stabilizer Bar Suspension Type - Rear (Cont.) w/Stabilizer Bar Shock Absorber Diameter - Front N/A mm Shock Absorber Diameter - Rear N/A mm Stabilizer Bar Diameter - Front N/A in Stabilizer Bar Diameter - Rear N/A in 2009 Nissan Versa 5dr HB CVT SL (52319) Prepared By: Florida Department of Management Services, Division of State Purchasing Tires Front Tire Order Code Rear Tire Order Code Spare Tire Order Code Front Tire Size P185/65R15 Rear Tire Size P185/65R15 Spare Tire Size T125/70D15 Wheels Front Wheel Size 15 x 5.5 in Rear Wheel Size 15 x 5.5 in Spare Wheel Size 15 x -TBD- in Front Wheel Material Aluminum Rear Wheel Material Aluminum Spare Wheel Material Steel Steering Steering Ratio (:1), Overall N/A Lock to Lock Turns (Steering) N/A Turning Diameter - Curb to Curb N/A ft Turning Diameter - Wall to Wall N/A ft Brakes Brake Type Pwr Brake ABS System Brake ABS System (Second Line) N/A Disc - Front (Yes or ) Yes Disc - Rear (Yes or ) Front Brake Rotor Diam x Thickness 11.02 x -TBD- in Rear Brake Rotor Diam x Thickness Drum - Rear (Yes or ) Yes Rear Drum Diam x Width N/A in Fuel Tank Fuel Tank Capacity, Approx 13.2 gal Aux Fuel Tank Capacity, Approx N/A gal Report content is based on current data. Any performance-related calculations are offered solely as guidelines.
Load more

Recommended publications
  • VIEW Open Access Chassis Coordinated Control for Full X‑By‑Wire Vehicles‑A Review Lei Zhang1,2 , Zhiqiang Zhang1,2, Zhenpo Wang1,2*, Junjun Deng1,2 and David G
    Zhang et al. Chin. J. Mech. Eng. (2021) 34:42 https://doi.org/10.1186/s10033-021-00555-6 Chinese Journal of Mechanical Engineering REVIEW Open Access Chassis Coordinated Control for Full X-by-Wire Vehicles-A Review Lei Zhang1,2 , Zhiqiang Zhang1,2, Zhenpo Wang1,2*, Junjun Deng1,2 and David G. Dorrell3 Abstract An X-by-wire chassis can improve the kinematic characteristics of human-vehicle closed-loop system and thus active safety especially under emergency scenarios via enabling chassis coordinated control. This paper aims to provide a complete and systematic survey on chassis coordinated control methods for full X-by-wire vehicles, with the primary goal of summarizing recent reserch advancements and stimulating innovative thoughts. Driving condition identifca- tion including driver’s operation intention, critical vehicle states and road adhesion condition and integrated control of X-by-wire chassis subsystems constitute the main framework of a chassis coordinated control scheme. Under steer- ing and braking maneuvers, diferent driving condition identifcation methods are described in this paper. These are the trigger conditions and the basis for the implementation of chassis coordinated control. For the vehicles equipped with steering-by-wire, braking-by-wire and/or wire-controlled-suspension systems, state-of-the-art chassis coordi- nated control methods are reviewed including the coordination of any two or three chassis subsystems. Finally, the development trends are discussed. Keywords: X-by-wire systems, Chassis coordinated control,
    [Show full text]
  • Vehicle Information SELECTED MODEL
    2009 Honda Pilot 4WD 4dr LX (YF4829EW) Prepared By: Florida Department of Management Services, Division of State Purchasing Vehicle Information SELECTED MODEL Code Description YF4829EW 2009 Honda Pilot 4WD 4dr LX SELECTED VEHICLE COLORS SELECTED OPTIONS Code Description ___ STANDARD PAINT All prices and specifications are subject to change without notice. Prices do not include sales tax, vehicle registration fees, finance charges, documentation charges, or other fees required by law. Dealer invoice prices do not include dealer charges, such as advertising charges, that can vary by manufacturer or region. 2009 Honda Pilot 4WD 4dr LX (YF4829EW) Prepared By: Florida Department of Management Services, Division of State Purchasing Standard Equipment MECHANICAL 3.5L SOHC MPFI 24-valve i-VTEC V6 engine Variable Cylinder Management (VCM) Active control engine mount system (ACM) Active Noise Cancellation (ANC) Drive-by-wire throttle 5-speed automatic transmission w/OD Hill start assist Heavy-duty automatic transmission fluid cooler Vehicle Stability Assist (VSA) w/traction control Variable Torque Management (VTM-4) 4-wheel drive system Integrated class III trailer hitch w/trailer harness pre-wiring Unit-body construction MacPherson strut front suspension Multi-link rear suspension w/trailing arms Front & rear stabilizer bars Variable pwr rack & pinion steering Heavy duty pwr steering fluid cooler Pwr ventilated front/solid rear disc brakes 4-wheel anti-lock braking system (ABS) w/electronic brake distribution (EBD) Brake assist EXTERIOR 17" steel
    [Show full text]
  • 2019 Textron Off Road Wildcat XX Technical Specifications
    2019 WILDCAT™ XX MODELS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 2019 TEXTRON OFF ROAD TECHNICAL SPECIFICATIONS © 2019 Textron Specialized Vehicles 2019 WILDCAT™ XX 2019 WILDCAT™ XX LTD • [NEW MODEL FOR 2019] • Rapid Response drive and Rapid Reaction driven • The curved dashboard focuses 60 percent of the KEY FEATURES clutches provide maximum power transfer and viewing surface toward the driver. instant response to varying loads with minimal • Three-cylinder 998cc DOHC naturally aspirated friction and wear. Dual CVT air intake system • Plug-and-Play accessory installation is pre-wired 4-stroke engine with EFI delivers 130-hp ensures maximum drivetrain efficiency and with four key switch-based powered accessory performance, ultra-quick response and maximum durability. connections and four independently fused and durability. switched circuits for fast and easy installation. • Cast-aluminum 15-in. KMC wheels are • The wishbone-style, trailing arm rear suspension custom built just for the Wildcat XX, delivering • Double-sheer mounted steering and suspension delivers race-proven performance throughout its lightweight, ultimate strength and a signature components deliver optimal durability. Large 18 inches of travel, with an 80 percent reduction style. forged-aluminum front steering knuckles with in track width change compared to other designs. large automotive bearings bring desert racing • 30-inch CST Behemoth tires. performance and durability. • Double A-arm front suspension features unequal length A-arms for optimal wheel camber through • Front gear case and rear transaxle are • Removable rear cargo box handles a 300- the full 18-inch range of travel, resulting in specifically designed and built to support the lb. payload and can accept a spare tire up to maximum handling and cornering control.
    [Show full text]
  • Adaptive Brake by Wire from Human Factors to Adaptive Implementation
    UNIVERSITY OF TRENTO Doctoral School in Engineering Of Civil And Mechanical Structural Systems Adaptive Brake By Wire From Human Factors to Adaptive Implementation Thesis Tutor Doctoral Candidate Prof. Mauro Da Lio Andrea Spadoni Mechanical and Mechatronic Systems December 2013 - XXV Cycle 1 Adaptive Brake By Wire From Human Factors to Adaptive Implementation 2 Adaptive Brake By Wire From Human Factors to Adaptive Implementation Table of contents TABLE OF CONTENTS .............................................................................................................. 3 LIST OF FIGURES .................................................................................................................... 6 LIST OF TABLES ...................................................................................................................... 8 GENERAL OVERVIEW .............................................................................................................. 9 INTRODUCTION ................................................................................................................... 12 1. BRAKING PROCESS FROM THE HUMAN FACTORS POINT OF VIEW .................................... 15 1.1. THE BRAKING PROCESS AND THE USER -RELATED ASPECTS ......................................................................... 15 1.2. BRAKE ACTUATOR AS USER INTERFACE ................................................................................................. 16 1.3. BRAKE FORCE ACTUATION : GENERAL MOVEMENT -FORCE DESCRIPTION ......................................................
    [Show full text]
  • The Design of a Controller for the Steer-By-Wire System∗
    896 The Design of a Controller for the Steer-by-Wire System∗ Se-Wook OH∗∗, Ho-Chol CHAE∗∗∗, Seok-Chan YUN∗∗ and Chang-Soo HAN∗∗∗∗ Drive-by-Wire (DBW) technologies improve conventional vehicle performance and a Steer-by-Wire (SBW) system is one of the DBW technologies. The control algorithm of the SBW system was designed in this paper. To verify the control algorithm, the SBW system is modeled using the bond graph method. The first aim of the control algorithm is controlling the steering wheel assist motor to make the real vehicle’s steering feel and for a vehicle designer to adjust the steering feel as he finds necessary. Therefore, torque map is designed to determine the steering wheel reactive torque. The second aim is controlling the front wheel assist motor to improve vehicle’s maneuverability and stability by using understeer and oversteer propensity of a vehicle. Furthermore, high performance control algorithm is proposed in this paper and Active Roll Stability Control (ARSC) method is designed as one of the high performance control algorithm. Key Words: Steer-by-Wire, Drive-by-Wire, Torque Map, Steering Feel, Active Roll Stabil- ity Control a vehicle’s weight by reducing the number of necessary 1. Introduction parts which can lead to energy reduction effectiveness. In 1. 1 Research background and purpose addition, the danger of a driver being crushed when there is a front-end collision is eliminated as there is no steering The Steer-by-Wire (SBW) system is one part of the column. Finally, the most valuable merit is that it per- Drive-by-Wire (DBW) system that the automobile indus- try will research in future.
    [Show full text]
  • WH1212 TSP Instructions
    Installation Manual Product No. WH1212 2003-2007 LS TRUCK WITH T56 MT STANDALONE WIRING HARNESS, EV6, DRIVE-BY-WIRE WH1212: 2003-2007 LS TRUCK WITH T56 MT STANDALONE WIRING HARNESS, EV6, DRIVE-BY-WIRE This harness is designed to be a complete wiring harness for fuel injection system on GM 2003 and newer Vortec engines with Drive By Wire throttle body and T56 or non- electronic transmissions. 1. Never disconnect the battery or the PCM while the ignition is turned “ON” 2. Never short any wires in the wiring harness to ground (with the exception to the ground wires) this can cause damage to the PCM. 3. A Multi-meter with a minimum of 10-Mohm resistance is required for test circuits. Do not back probe wires, this can lead to permanent wire damage. Requirements: 1. All Vortec engines require VATS to be removed from the PCM. If the system is not removed from the PCM the engine will NOT start. 2. Vortec engine harness utilizes two oxygen sensors on each side of the engine, one before and after the catalytic converter. The rear O2 sensors (after the catalytic converter) are NOT used. 3. All Vortec engines utilize an EGR, Air Pump, and CCP features for emission control, this harness does not include provisions for EGR, Air Pump, and CCP are not necessary for engine operation. PCM programing may be necessary to avoid storing a Diagnostic Trouble Codes (DTC) for the absence of emission equipment 4. It is recommended that you use a VSS when using a T56 or nonelectric transmission (TH350, TH400, Powerglide, 700R4, etc.).
    [Show full text]
  • Mechatronics and Remote Driving Control of the Drive-By-Wire for a Go Kart
    sensors Article Mechatronics and Remote Driving Control of the y Drive-by-Wire for a Go Kart Chien-Hsun Wu * , Wei-Chen Lin and Kun-Sheng Wang Department of Vehicle Engineering, National Formosa University, Yunlin 63201, Taiwan; [email protected] (W.-C.L.); [email protected] (K.-S.W.) * Correspondence: [email protected] This paper is an extended version of the paper published in: Wu, C.H.; Lin, W.C.; Lin, Y.Y.; Huang, Y.M. y System Integration of Drive-by-wire for a Go Kart. In Proceedings of the 2019 IEEE Eurasia Conference on IOT, Communication and Engineering, Yunlin, Taiwan, 3–6 October 2019. Received: 31 December 2019; Accepted: 20 February 2020; Published: 23 February 2020 Abstract: This research mainly aims at the construction of the novel acceleration pedal, the brake pedal and the steering system by mechanical designs and mechatronics technologies, an approach of which is rarely seen in Taiwan. Three highlights can be addressed: 1. The original steering parts were removed with the fault tolerance design being implemented so that the basic steering function can still remain in case of the function failure of the control system. 2. A larger steering angle of the front wheels in response to a specific rotated angle of the steering wheel is devised when cornering or parking at low speed in interest of drivability, while a smaller one is designed at high speed in favor of driving stability. 3. The operating patterns of the throttle, brake, and steering wheel can be customized in accordance with various driving environments and drivers’ requirements using the self-developed software.
    [Show full text]
  • Design of Automotive X-By-Wire Systems Cédric Wilwert, Nicolas Navet, Ye-Qiong Song, Françoise Simonot-Lion
    Design of automotive X-by-Wire systems Cédric Wilwert, Nicolas Navet, Ye-Qiong Song, Françoise Simonot-Lion To cite this version: Cédric Wilwert, Nicolas Navet, Ye-Qiong Song, Françoise Simonot-Lion. Design of automotive X-by- Wire systems. Richard Zurawski. The Industrial Communication Technology Handbook, CRC Press, 2005, 0849330777. inria-00000562 HAL Id: inria-00000562 https://hal.inria.fr/inria-00000562 Submitted on 27 Aug 2007 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Design of automotive X-by-Wire systems Cédric Wilwert PSA Peugeot - Citroën 92000 La Garenne Colombe - France Fax: +33 3 83 58 17 01 Phone: +33 3 83 58 17 17 [email protected] Nicolas Navet LORIA UMR 7503 – INRIA Campus Scientifique - BP 239 - 54506 VANDOEUVRE-lès-NANCY CEDEX Fax: +33 3 83 58 17 01 Phone : +33 3 83 58 17 61 [email protected] Ye Qiong Song LORIA UMR 7503 – Université Henri Poincaré Nancy I Campus Scientifique - BP 239 - 54506 VANDOEUVRE-lès-NANCY CEDEX Fax: +33 3 83 58 17 01 Phone : +33 3 83 58 17 64 [email protected] Françoise Simonot-Lion LORIA UMR 7503 – Institut National Polytechnique de Lorraine Campus Scientifique - BP 239 - 54506 VANDOEUVRE-lès-NANCY CEDEX Fax: +33 3 83 27 83 19 Phone : +33 3 83 58 17 62 [email protected] CONTENTS Design of automotive X-by-Wire systems ......................................................................................................
    [Show full text]
  • Design of a Safety-Critical Drive-By-Wire System Using Flexcan
    2006-01-1026 Design of a Safety-Critical Drive-By-Wire System Using FlexCAN Manuele Bertoluzzo, Giuseppe Buja University of Padova, Department of Electrical Engineering Juan R. Pimentel Kettering University, Department of Electrical and Computer Engineering Copyright © 2005 SAE International ABSTRACT The application of DbW systems in the industrial vehicles (e.g., lift trucks) has not been investigated as deeply as in This paper describes the design of a drive-by-wire system the automobile sector even if they pose less stringent for a commercial lift truck using the FlexCAN demands in terms of safety and technical specifications. communication architecture. FlexCAN is a recently This because the industrial vehicles typically are driven by developed architecture based on the CAN protocol to qualified workers, have a cruising speed much slower than support deterministic and safety-critical applications. The a car and operate in enclosed spaces such as yards or main features of FlexCAN are its simplicity and ready storehouses. implementation based on COTS CAN components. The main steer-by-wire design tasks are listed and a In this paper a DbW system responsible for the steering description of how each of the tasks was accomplished and acceleration maneuvers of a commercial lift truck is using the FlexCAN architecture is detailed. A performance presented. Attention is focused on the control architecture evaluation of the design is included. of the DbW system and the design of the communication network. The in-progress activity to validate the design is INTRODUCTION also illustrated. In detail, the paper is organized as follows. The Drive-By-Wire System section describes the It is the objective of this paper to address the trial lift truck used in the study, discusses the safety dependability requirements of the drive-by-wire system of requirements for the vehicle and derives the architecture of a lift truck and its implementation using the FlexCAN the DbW system.
    [Show full text]
  • Mpfi Fuel Injection System
    MPFI FUEL INJECTION SYSTEM PART NUMBERS 550-608 thru 550-615, 550-622 & 550-623 INSTALLATION & TUNING MANUAL – 199R10762 NOTE: These instructions must be read and fully understood before beginning installation. If this manual is not fully understood, installation should not be attempted. Failure to follow these instructions, including the pictures may result in subsequent system failure. 1 TABLE OF CONTENTS: 1.0 INTRODUCTION ....................................................................................................................................................................... 4 2.0 WARNINGS, NOTES, AND NOTICES ...................................................................................................................................... 4 3.0 PARTS IDENTIFICATION ......................................................................................................................................................... 5 4.0 ADDITIONAL ITEMS REQUIRED FOR INSTALLATION .......................................................................................................... 5 5.0 TOOLS REQUIRED FOR INSTALLATION ............................................................................................................................... 6 6.0 REMOVAL OF EXISTING COMPONENTS .............................................................................................................................. 6 7.0 TERMINATOR MPFI SYSTEM INSTALLATION ......................................................................................................................
    [Show full text]
  • Designing Steering Feel for Steer-By-Wire Vehicles Using Objective Measures Avinash Balachandran and J
    This article has been accepted for inclusion in a future issue of this journal. Content is final as presented, with the exception of pagination. IEEE/ASME TRANSACTIONS ON MECHATRONICS 1 Designing Steering Feel for Steer-by-Wire Vehicles Using Objective Measures Avinash Balachandran and J. Christian Gerdes Abstract—Drivers use torque feedback at the handwheel of a production vehicles in 2013, artificially creating this feel be- vehicle, or steering feel, to obtain information about the road and comes increasingly important [4]. tire dynamics. This aids them in driving tasks like curve negotia- One way of creating steering feel on steer-by-wire vehicles tion. Steer-by-wire vehicles, due to the mechanical decoupling of the front tires and handwheel, do not have any inherent steering is to feedback the steering motor torque directly to the driver. feedback and require an artificial steering feel. One way to imple- Shengbing et al. demonstrated using hardware-in-the-loop sim- ment an artificial steering feel is to synthesize steering feedback ulation that steering motor current can generate steering feed- with a model running on board the vehicle. Identifying the appro- back [5]. Similarly, Asai et al. used a test bench setup to show priate level of model fidelity required involves understanding what that steering motor current coupled with a torque map can gener- elements of steering feel are important. This paper proposes using objective steering feel measures used in industry as a means of ate steering feel [6]. Though this technique generates a realistic understanding which elements of steering feel are most important.
    [Show full text]
  • Drive by Wire Throttle Body System
    Drive-By-Wire Throttle Body Harness Installation PN 558-406 INSTRUCTION MANUAL – 199R10522 1.0 Overview The Holley Dominator ECU has built in capability to control OEM type Drive-By-Wire throttle pedals and throttle bodies for aftermarket installation. To ensure a safe and reliable installation, there are certain hardware requirements that must be followed: Only the following factory drive-by-wire throttle bodies have been pre-calibrated and approved for use with this harness: . GM P/N - 12570790 . GM P/N - 12580760 Only the following factory drive-by-wire throttle pedal assemblies have been pre-calibrated and approved for use with this harness: . GM P/N - 10379038 2.0 Warnings! Use only the drive-by-wire wiring harness supplied by Holley. THIS HARNESS CAN NOT BE CUT, SHORTENED, LENGTHENED, TAILORED, OR MODIFIED UNDER ANY CIRCUMSTANCE! THE HARNESS CONTAINS PROTECTIVE SHIELDING / GROUNDED CABLING TO ENSURE PROPER OPERATION. DO NOT REMOVE OR MODIFY THE PROTECTIVE SHEATHING UNDER ANY CIRCUMSTANCES. HOLLEY ASSUMES NO LIABILITY FOR ANY INSTANCES ARISING DUE TO USE OF THROTTLE PEDALS, THROTTLE BODIES OR ASSOCIATED COMPONENTS NOT SPECIFICALLY APPROVED BY HOLLEY. 3.0 Installation Installation of both the drive-by-wire throttle body and pedal assembly should be performed by a professional, competent mechanic. It is important that the installation of both the throttle body and pedal assembly on an engine (not originally equipped with these components) be done in such a manner that assures proper operation of both components as intended by the OEM manufacturer. The throttle body must be installed in such a manner that the throttle plate(s) are allowed to rotate freely.
    [Show full text]