User Manual 0.4 MB
Total Page:16
File Type:pdf, Size:1020Kb
CA-2016 Computer Speakers CA-2016 Computer Speakers Please read the entire manual before making any connections. Follow these steps before connecting or attempting to turn speakers on: P r e c a u t i o n T i p s 1) The speaker with the controls is the “right speaker”. Normally, these are placed on the right side of your monitor. Place the speaker • Disconnect the USB plug from USB port of your computer before making any without controls (the left speaker) on the left side of the monitor. audio connections. 2) Switch power to off position. • Keep discs and tapes away from them. • Keep your speakers away from extreme heat or humid and wet conditions. 3) Turn the volume to the minimum position (rotate counter clockwise). T r o u b l e s h o o t i n g Speakers produce no sound • Are the speakers getting power? Is the power indicator light on? Check the USB connections. • Is there any output from your sound card? Check your sound card settings. Also, you can check the speakers easily by connecting them to another music source Cable with USB plug to USB port or hub such as a portable CD player or cassette player. Just plug them into the headphone jack or line out jack. If the speakers work on this other source, they Headphone jack are OK and the problem is with the soundcard. Note: Speakers still need to be Volume control connected to a USB port for power. Power indicator light Cable connecting left and right Power on/off switch speaker Cable and plug (green) to sound card or other source One speaker does not play • Check the balance control on your mixer software. C o n n e c t i o n s • Check the plug connections. The following examples show a couple of the multiple applications in which your speakers can be used. Switch the power off while Customer Service making these connections. If you have questions or need assistance with your speakers, please call or consult our web site. Personal CD Attached 3.5mm player mini plug cable Tel: 360 823 4100 Web site: www.cyberacoustics.com L Right Note: speaker Green R 1) For technical support and questions, please contact Cyber Acoustics plug Tel: 360-823-4100 / Fax: 360-883-4888 / E-mail: [email protected] Left speaker 2) You can now register your Cyber Acoustics product on line through our web site in lieu of filling MP3 player out and mailing this card: www.cyberacoustics.com Cyber Acoustics, Inc. USB port or hub P.O. Box 821348 Vancover, Computer WA 98682 T u r n i n g t h e S p e a k e r s o n 1) Plug in the USB port into the USB port on your computer or a USB hub. Name 2) Check the volume is turned to the minimum position. Address 3) Press the power button on the right front panel. Check that the “power indicator” light comes on. 4) Normally, the best way to test your speakers is to play a regular audio CD in your systems CD ROM or DVD device. Phone 5) Slowly turn volume up to desired listening level. (Note: Your multimedia computer system has different ways to adjust the volume Model purchase tones. Consult your soundcard or music source user guide to change any desired settings. Normally, the speaker volume control/ mixer in your software should be turned up around 80 - 85%.) Date purchase 6) When using headphones. You can use headphones with 3.5mm plugs with these speakers. When you plug your headphones Name of store into the jack on the front of the speaker, the speakers stop producing sound. The volume control on the speaker adjusts the volume One Year Limited Warranty Registration for your headphones..