SE122 & SE202 Tactical
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Glossary of Firearms Terminology
European Firearm Experts (EFE) Group Glossary of Firearms Terminology January 2013 Aim One of the recommendations of the European Union Threat Assessment - Assessing the Threat from the Criminal Use and Supply of Firearms within the European Union (November 2011) written by the UK on behalf of the EFE was the need to create a standard glossary of firearms terminology. The Glossary of Firearms Terminology is an EFE initiative that has been lead by the UK as part of an EFE Working Group. It is not a document intended to change terminology in Member State’s domestic legislation, but rather to ensure that EFE members are able to communicate effectively when discussing firearms and is intended for use by the EFE representatives, who are Law Enforcement and Customs officers, not technical firearm specialists. This document is intended to be a living document that will be updated as required centrally via the EFE and has been officially disseminated in January by the EFE for use by all EFE Member States. Any feedback can be directed to [email protected] Ammunition Ammunition - a collective term for all items that can be discharged from a firearm. A loaded cartridge consists of a primed case, propellant and with / or without one or more projectiles. Ball Ammunition - ammunition loaded with full metal jacketed (FMJ) bullets BB - this refers to the size of birdshot with a nominal diameter of.180” in shotgun cartridges. It is also used to refer to air weapon ammunition of.177” (4.5mm) steel projectiles in diameter and also to the plastic BBs used in airsoft or soft air weapons. -
“Building Decades of Experience Into America's Rifle”
Catalog 2016 v.1 Complete MCS System .223 Upper MCS .300 Blackout Barrel MCS 9mm M4 Barrel Bolt & Magazine MCS 7.62x39 Barrel Bolt Carrier & Magazine MCS System Lower with Telestock 7.62x39 for AK type Mags 9mm .223/5.56 -.300 - 7.62x39 MCS System Magazine Wells © 2016 Windham Weaponry, Inc. “Building Decades of Experience into America’s Rifle” Windham Weaponry – Protecting Your Firearm Investment Backing up our commitment to producing the finest rifles possible, every Windham Weaponry rifle includes our Transferable Limited Lifetime Warranty - the best in the business! TRANSFERABLE LIMITED LIFETIME WARRANTY* Windham Weaponry, Inc. (WWI) will warranty all firearms manufactured by WWI against any and all manufacturer’s defects in material and workmanship which affect reasonable operation for the lifetime of the firearm to the purchaser. This warranty is transferable from the original purchaser to a subsequent buyer. Warranty is established by registering online at: http://www.windhamweaponry.com or by phone with our Customer Service Department at 855-808-1888. Warranty claims may be made by contacting Customer Service, either in writing or by phone for a Return Authorization number prior to delivering the unloaded firearm to Windham Weaponry, Inc., 999 Roosevelt Trail, Windham, Maine 04062, freight prepaid by the purchaser. Firearms and ammunition must be shipped separately. No COD shipments will be accepted. WWI will repair or replace only those parts determined to be defective by the factory. This warranty does not apply to normal wear -
Ada County Sheriff's Office Forensic Lab Firearms Analytical Method
Ada County Sheriff’s Office Forensic Lab Ada County Sheriff’s Office Forensic Lab Firearms Analytical Method Version 1.0 Firearms Analytical Method V. 1.0 Effective Date: April 6, 2021 Approving Authority: Forensic Lab Manager Page 1 of 66 Ada County Sheriff’s Office Forensic Lab 1 Scope 2 References 3 Terms and Definitions 4 General Requirements 4.1 Impartiality 4.2 Confidentiality 5 Structural Requirements 6 Resource Requirements 6.1 General 6.1.1 Safe Firearm Handling 6.2 Personnel 6.3 Facilities and Environmental Conditions 6.4 Equipment 6.4.1 Measuring Equipment 6.4.2 Comparison Microscope 6.4.3 Bullet Tank Recovery Systems 6.4.4 Reference Collections 6.5 Metrological Traceability 6.5.1 Micrometer/Caliper Verification 6.5.2 Trigger Pull Measuring Device Verification 6.5.3 Comparison Microscope Magnification and Integral Scale Verification 6.6 Externally provided services and products 7 Process Requirements 7.1 Review of Requests, Tenders and Contracts 7.2 Selection verification and validation of methods 7.3 Sampling Firearms Analytical Method V. 1.0 Effective Date: April 6, 2021 Approving Authority: Forensic Lab Manager Page 2 of 66 Ada County Sheriff’s Office Forensic Lab 7.4 Handling of test or calibration items 7.4.1 Examination of Firearms 7.4.2 Ammunition Identification 7.4.3 Fired Bullet Examination 7.4.4 Serial Number Restoration 7.4.5 Distance Determination 7.4.6 Sound Suppressor Examination 7.4.7 IBIS/NIBIN 7.5 Technical Records 7.6 Evaluation of Measurement Uncertainty 7.7 Ensuring the validity of results 7.8 Reporting the results 7.9 Complaints 7.10 Nonconforming work 7.11 Control of data and information management 8 Management System Requirements Firearms Analytical Method V. -
BCI Firearms Methods Manual
Ohio BCI Laboratory LM-Firearms Methods Issuing Authority: Laboratory Director Effective Date 08/28/2020 Revision 18 Page 1 of 54 Firearms Methods Manual Table of Contents 1 Procedure for the Examination of Firearms ............................................................... 4 1.1 Safety Considerations ......................................................................................... 4 1.2 Safe Firearm Handling......................................................................................... 4 1.2.1 Pre-firing safety examinations........................................................................ 5 1.2.2 Test Firing and Evidence Examination ............................................................ 5 1.3 Examination Documentation.............................................................................. 6 1.4 Physical Examinations......................................................................................... 7 1.4.1 Foreign Material.............................................................................................. 7 1.4.2 Barrel & Overall Length Measurement........................................................... 7 1.4.3 Rusted Firearms ............................................................................................ 10 1.4.4 Firearm Malfunction Examination................................................................ 10 1.4.5 Bore/Chamber Casting.................................................................................. 12 1.5 References ....................................................................................................... -
Pistol 214-243
Items Slides PISTOL INDEX FRONTCUT SLIDES FOR GLOCK® 43 & 48 RMR SLIDE FOR GLOCK® Barrels ........................ 220-223 Magazines & Parts ............. 227-232 Window Slide Maximize the Performance of Stainless Steel Slide With a Bundle of Custom Features Frames/Slides ...................214-220 Magwells ..................... 224-225 Your Pocket Glock® With an ® Upgraded "Top Half" Our RMR Slides for Glock Grips & Screws ................ 241-243 Safeties............................. 223 pistols feature a distinctive, With our Front-Cut Slide in- wraparound serration pattern Guide Rods ................... 223-224 Springs ....................... 232-234 stalled, you'll find your pocket that aids in manipulating the RMS/RMSC slide, especially when checking PISTOL Glock® becomes easier to oper- Cut Slide Ignition Parts.................. 240-241 Triggers & Components......... 234-240 ate without any change in its reli- the chamber. (OK, we’ll admit ability or size. The G43's greatest it: the serrations look cool, too.) Mag & Slide Releases........... 225-226 strength is that it lets you carry a They also come with a pre-cut slot for easy, secure, low-profile pistol with 6 rounds of centerfire mounting of a Trijicon RMR sight. All Front Cut RMR Slides also have Blank Slide punch in an ultra-compact EDC standard Glock factory front and rear sight dovetails for "iron" sights. package. The downside is the Since the RMR sits low, it can easily co-witness with iron sights. In G43's such a small pistol (barely 6" addition, you can get your Front Cut RMR Slide with an optional "window" cutout on top between the front serrations that reduces ® OAL), you can have trouble getting a firm grasp on the slide to rack SLIDES FOR FOR GLOCK 17/19/34 19LS EXTENDED SLIDE FOR it. -
Glossary of Firearm Terminology
VIRGINIA GUN COLLECTORS ASSOCIATION GLOSSARY OF FIREARMS COLLECTING TERMS Marc Gorelick VGCA A ACCOUTREMENT - Equipment carried by soldiers on the outside of their uniform, such as belts, ammunition pouches, bayonet scabbards, or canteens, but not weapons. ACCURIZE or ACCURIZING - The process of altering a firearm to improve its accuracy. ACTION - The mechanism and method that manipulates, loads, locks, extracts and ejects cartridges and/or seals the breech. Actions are broadly classified as either manual or self-loading and are generally categorized by the type of mechanism used. Manual actions are single shot or repeater. Single shot actions include dropping block (tilting or falling) rolling block, break, hinged (such as a trapdoor), and bolt. Repeater actions include revolver, bolt (turn-bolt or strait-pull), lever, pump and slide. Self-loading actions are semiautomatic or automatic. ADJUSTABLE SIGHT - A firearm sight that can be adjusted for windage and/or elevation so that the shooter’s point of aim and the projectile’s point of impact coincide at the target. Only the rear sight is adjustable on a majority of firearms, but front sights may also be adjustable. AIR CHAMBER (See LIGHTENING GROOVE) – A 19th century U.S. Ordnance Department the term for a groove cut out of the inside of a rifle’s wooden forend or a carbine’s forearm in order to make the firearm lighter. AIR GUN – A long arm or handgun that uses compressed air to fire a projectile. The earliest known air guns date to the 16th century. The compressed air was kept in a chamber in the buttstock or in a round metal ball attached to the underside of the barrel near the breech. -
Auction - Amoskeag Online #129 - March 2021 03/29/2021 1:05 PM EDT
Auction - Amoskeag Online #129 - March 2021 03/29/2021 1:05 PM EDT Lot Title/Description Lot Title/Description 2000 Mauser HSc Semi-Auto Pistol with German Army Markings 2004 Ruger Old Model Single Six Magnum Convertible Revolver serial #751185, 32 ACP, 3 1/2" barrel with a bright excellent bore. The serial #406332, 22 Magnum RF / 22 LR, 6 1/2" barrel with an excellent metal surfaces of this third variation pistol retain about 94% original bore. The Single Six revolvers with 6 1/2" barrels were sold as 22 bright blue showing some mild high edge wear and most of the loss due Magnum Rimfire's (main cylinder) with a spare 22 LR cylinder. The to some areas toning to gray with remnants of some faint oxidation metal surfaces of this 1964-manufactured revolver remain in excellent along either side of the slide, a bit more noticeable on the right. All condition with about 98-99% original blue and anodized finishes markings remain crisp and clear with proper "(Eagle) / 135" Waffenamt including the spare cylinder showing minor edge wear and a few on the left side triggerguard. The checkered walnut grips remain in very handling marks. One anomaly noted is a small spot of bare aluminum on good plus condition showing a few light dings and mild handling marks. the backstrap just below the knuckle where the finish did not take, The action seems to function well mechanically and one original possibly from a contaminate when the finish was applied. The smooth magazine in excellent condition is included. -
Win! a D&L Sports Custom Ar-15 Package!
COPCOVERmA 2/10/06 10:29 AM Page 1 $5.95 IN CANADA I'M NOT A COP BUT ... $9.50 WWW.AMERICANCOPMAGAZINE.COM MARCH/APRIL 2006 WIN! A D&L SPORTS CUSTOM AR-15 PACKAGE! DO WE REALLY NEED?? SWAT FN's Five-seveN Macho Mousegun Urban Rifle: Reliability: PART IV REVOLVERS FOCUS: VS. AUTOS ••POLYSHOCKPOLYSHOCK AMMO ••FEDERALFEDERAL FLIGHT CORRECTIONS — CONTROL BUCK ONE NATION ••AA FAILUREFAILURE TOTO PLANPLAN UNDER ARREST c2,c3,c4 2/9/06 2:14 PM Page c2 M-A section 1 2/9/06 2:01 PM Page 3 M-A section 1 2/9/06 3:51 PM Page 4 2006 Volume 1, Number 4 MAR • APR WWW.AMERICANCOPMAGAZINE.COM 46 ON THE COVER Photos: Rich Stahlhut FEATURES 24 38 YOU JUST NEED TO BE WILLING DAVE SPAULDING ECQS, more letter salad? 40 IS TINY STILL TOUGH? CHARLES PETTY The FN Five-seveN. 46 DO WE REALLY NEED SWAT? CLINT SMITH Yes? No? Maybe? 51 HOW TO SMOKE A WEASEL JEREMY D. CLOUGH The care and feeding of unethical defense attorneys. 54 REVOLVERS -VS- AUTOS JIMMY JOHNSON Reliability or capacity — you choose. 56 BEHIND THE WALLS BRIAN DAWE The tough, tough job of correctional officers. 59 FLIGHT CONTROL MARK HANTEN Federal Ammunition’s shotgun ammo. 61 I’M NOT A COP BUT ... ROB LEATHAM Who wants to be in a fair gunfight? 62 OH NO! YOU DID WHAT I TOLD YOU ERNEST EMERSON Things we do without even realizing. 4 AMERICAN COP • MARCH/APRIL 2006 M-A section 1 2/9/06 2:01 PM Page 5 59 56 65 32 COLUMNS 51 16 LEAA JIM FOTIS 18 HIGH TECH BOB DAVIS 20 OFFICER SURVIVAL SAMMY REESE 22 EVOC ANTHONY RICCI 26 HARD TOOLS FRANK BORELLI 28 PRIVATE SECURITY PAUL MARKEL RESOURCES 30 STREET LEVEL JOHN MORRISON 32 REALITY CHECK II CLINT SMITH 77 SPOTLIGHT 80 CLASSIFIEDS 34 RESERVES CHARLES E. -
European Firearm Experts (EFE) Group Glossary of Firearms Terminology September 2012
European Firearm Experts (EFE) Group Glossary of Firearms Terminology September 2012 Consolidated text incorporating changes proposed by FESAC, April 2013 ______________________________________________________________________ Ammunition Ammunition - A collective term for all objects and materials used to enable a firearm to function as such, including ignition, case, propellant and projectile. Ball Ammunition – ammunition for use in firearms loaded with lead or full metal jacketed (FMJ) bullets, not designated as armour piercing and not containing an explosive or incendiary charge BB - this refers to the size of birdshot with a nominal diameter of .18” in shotgun cartridges. It is also used to refer to air gun round pellets of .177” (4.5mm) diameter and also to the plastic BBs used in airsoft or soft air guns that are generally 6 mm in diameter. Belt - a flexible device consisting of a single part or combined links, used to hold and control the feed of ammunition into a, mostly automatic, firearm. Belted Cartridge – a cartridge that incorporates a “belt” around the base of the cartridge intended to obtain uniform head-spacing. Black Powder - historically, “Gunpowder” is the earliest form of propellant that has now been replaced in modern firearms by the introduction of “Smokeless Powder”. – It is a mechanical mixture of potassium or sodium nitrate (“saltpetre”), charcoal and sulphur. The rapidly burning propellant produces a volume of hot gases that force the projectile through the barrel and, in case of breech-loading firearms, seal the cartridge case against the chamber wall of the. Black powder was in general use until about 1900, after which is was almost completely replaced by smokeless powder (introduced in 1885). -
The Future of Reloading
Lyman® 2021 The Future of Reloading Innovative Products for Shooters Since 1878 Dear Fellow Shooters- 2020 was a year of great challenge for our company, for our customers and for our nation. Thankfully, at Lyman we were able to continue operations throughout the year and were able to continue to serve our customers and keep our employees working while maintaining the highest levels of safety possible. We hope that you and your families are well, and we look forward to a return to normal sometime in the near future. This past year was a year of research and innovation for Lyman. We challenged our engineering and manufacturing teams to develop the processes and the innovation to take the Mark 7 product line to the next level, and in 2021 we will start to see all their efforts come to fruition. In 2021 we will bring to the market, a new series of exciting products to serve both the commercial loader and the individual reloading community. Our new APEX 10 loading machine is a completely new press design and will be on the market in the first quarter of 2021. Along with that we will introduce our patented, new, Primer Xpress oscillating primer feed system that will work effortlessly with both the new APEX 10 press as well as the Mark 7 Evolution. Our Commercial customers will finally see the new Titan series of automated loading systems. The Titan XL is the first automated modular system for the commercial loader than can handle calibers up to .338 Lapua. The new Titan Double Feed allows reloaders to double their production from 3500 rounds per hour to an effective speed of 7000 rounds per hour. -
United States Court of Appeals for the Ninth Circuit
FOR PUBLICATION UNITED STATES COURT OF APPEALS FOR THE NINTH CIRCUIT UNITED STATES OF AMERICA, No. 18-10042 Plaintiff-Appellee, D.C. No. v. 4:17-cr-00855- RM-JR-2 THOMAS F. KUZMA, Defendant-Appellant. OPINION Appeal from the United States District Court for the District of Arizona Rosemary Márquez, District Judge, Presiding Argued and Submitted October 4, 2019 San Francisco, California Filed August 3, 2020 Before: Richard A. Paez and Daniel P. Collins, Circuit Judges, and Jennifer Choe-Groves,* Judge. Opinion by Judge Collins * The Honorable Jennifer Choe-Groves, Judge for the United States Court of International Trade, sitting by designation. 2 UNITED STATES V. KUZMA SUMMARY** Criminal Law The panel affirmed in part the district court’s judgment in a case in which the defendant was convicted of possession of a machinegun (18 U.S.C. § 922(o)) and possession of an unregistered machinegun (26 U.S.C. § 5861(d)); and remanded with instructions to vacate one of the two convictions. The panel rejected the defendant’s contention that the statutory definition of “machinegun” underlying both counts is unconstitutionally vague. Considering the proper construction of the challenged statutory phrase, the panel concluded that a weapon is “designed to shoot . automatically” as required in 26 U.S.C. § 5845(b) if it has a specific configuration of objective structural features that, in the absence of any minor defect, would give the weapon the capacity to shoot automatically. Because the challenged phrase relies on the objective features of the device even when it is combined with the statutory phrase “framer or receiver,” the panel rejected the defendant’s contention that the phrase is unconstitutionally vague on its face. -
Glossary of Firearms Terminology
Council of the European Union Brussels, 21 October 2015 (OR. en) PUBLIC 13250/15 LIMITE ENFOPOL 306 COSI 131 NOTE From: Presidency To: Delegations No. prev. doc.: 15631/14, 10048/15, 10753/1/15 REV 1 Subject: Glossary of Firearms Terminology DOCUMENT PARTIALLY ACCESSIBLE TO THE PUBLIC (08.01.2016) Delegations will find in the Annex the Glossary of Firearms Terminology as finalised by the European Firearm Experts (EFE) Group at its meeting on 14 October 2015. The Glossary is structured according to the following topics of firearms terminology: - Ammunition; - Firearms; - Ballistics / Law Enforcement Activity. The LEWP is invited to endorse the Glossary and encourage its better and wider use by the relevant experts, especially in the framework of national experts' contributions to multinational databases1. 1 See measure 5 in the list of actions suggested to COSI on improving the use of means of fighting trafficking of firearms (10753/1/15 REV 1). 13250/15 RR/dk 1 DGD 1C LIMITE EN Conseil UE ANNEX European Firearm Experts (EFE) Group Glossary of Firearms Terminology October 2015 Ammunition Ammunition - a collective term for all items that can be discharged from a firearm. A loaded cartridge consists of a primed case, propellant and with / or without one or more projectiles Ball Ammunition - ammunition loaded with bullet(s) BB - this refers to the size of birdshot with a nominal diameter of.180” in shotgun cartridges. It is also used to refer to air weapon ammunition of.177” (4.5mm) steel projectiles in diameter and also to the plastic BBs used in airsoft or soft air weapons.