P2 Viewer Plus Installation Procedure
P2 Viewer Plus Installation Procedure Revision 1.08 2020.10.26 Panasonic Corporation Trademarks and Registered Trademarks • Microsoft, Windows 7, Windows 8, Windows 8.1 and Internet Explorer are registered trademarks or trademarks of Microsoft Corporation in the United States, Japan and other countries. • Intel, Intel Core 2 Duo, Intel Core i7 and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. • Mac and OS X are trademarks of Apple Inc. registered in the United States and other countries. • Other various names, company names, product names, etc. mentioned in this document are trademarks or registered trademarks of the respective company. The TM and symbols are omitted in this document. ■ Information on software for this product 1.This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org) 2.This product includes software which is licensed under OpenBSD License. 1. Introduction This manual explains the installation procedure for new P2 Viewer Software that works on Windows PC / Mac. System Requirements The following environment is required to use this software: 【Clip Management Features, Ingest Functions】 Hardware • CPU AVC-Intra 4K 444 Core i7 (6 Core, 3960X or higher) and require skip mode AVC-Intra4K 422/ 4K -LT 30p or lower Core i7 (6 Core, 3960X or higher) 50p/60p Core i7 (6 Core, 3960X or higher) and require skip mode AVC-Intra2K 422 2 x Quad Core Xeon, Core i7 965 Extreme Ed.or higher, Core i7 2600 or higher AVC-LongG25 /50 Core i7 (Quad Core, 2720QM or higher) DVCPRO HD Pentium D (3.2 GHz or faster) AVC-Intra50 Core2 Duo (2.66 GHz or faster) AVC-Intra200/ 100 2 x Quad Core Xeon, Core i7 965 Extreme Ed.
[Show full text]