MATTER: International Journal of Science and Technology ISSN 2454-5880 Jirin et al., 2020 Volume 6 Issue 1, pp. 138-146 Date of Publication: 30th June 2020 DOI- https://doi.org/10.20319/mijst.2020.61.138146 This paper can be cited as: Jirin, M. S., Edwin, S., Kining, P., Majimin, P., Saili, A., & Idek, S., (2020). Angle Grinder Stand as a Supportive Tool for Cutting Metal Process. MATTER: International Journal of Science and Technology, 6(1), 138-146. This work is licensed under the Creative Commons Attribution-NonCommercial 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc/4.0/ or send a letter to Creative Commons, PO Box 1866, Mountain View, CA 94042, USA. ANGLE GRINDER STAND AS A SUPPORTIVE TOOL FOR CUTTING METAL PROCESS Mohd Sazali bin Jirin Welding Technology, Keningau Vocational College, Keningau, Sabah, Malaysia
[email protected] Silver Edwin Welding Technology, Keningau Vocational College, Keningau, Sabah, Malaysia
[email protected] Pounsin Kining Welding Technology, Keningau Vocational College, Keningau, Sabah, Malaysia
[email protected] Peter Majimin Welding Technology, Keningau Vocational College, Keningau, Sabah, Malaysia
[email protected] Jenis @ Amza Saili Welding Technology, Keningau Vocational College, Keningau, Sabah, Malaysia
[email protected] Dr. Sirhajwan Idek English Language Department, Keningau Vocational College, Keningau, Sabah, Malaysia
[email protected] ___________________________________________________________________________ Abstract The goal of this project was to examine the plausibility of a supplementary tool known as “Angle Grinder Stand” that can possibly aid the process of metal cutting in producing metal plates that were cut properly according to required measurements.