DOCSLIB.ORG

Specification No. 1347S Winchester Lift Station

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Specification No. 1347S Winchester Lift Station Riverside County Perris, California SPECIFICATION NO. 1347S WINCHESTER LIFT STATION ODOR CONTROL FACILITY Work Order # 414377 A PUBLIC WORKS PROJECT Volume 2 of 2 Cont ents: Special Conditions | Specifications | Appendices Paul D. Jones, II, P.E. - General Manager Safety is of paramount and overriding importance to Eastern Municipal Water District 11/12/2018 11/12/2018 Visit our website at www.emwd.org to view currently advertised projects Navigate to Construction Construction Bid Opportunities [PAGE LEFT INTENTIONALLY BLANK] TABLE OF CONTENTS VOLUME 1 BIDDING REQUIREMENTS PAGE 00000 Title Page 00010 Table of Contents 00012 Notice Inviting Bids NIB-1thru NIB-6 00014 Bid Opening Map 00016 Bid Walk-thru map/directions 00018 Instructions to Bidders B-1 thru -6 00020 Bidding Sheets & Equipment & Material List (submit with bid) BS-1 thru -6 00024 Proposal (7 day) (submit with bid) C3-1 thru -2 00027 Bidder’s Experience Record & Resumes (submit with bid) BR-1 thru -2 00028 Designation of Subcontractors (submit with bid) C5a thru e 00030 Contractor's Licensing Statement (submit with bid) C6-1 thru -2 00032 Non-Collusion Declaration (submit with bid) C7-1 thru -2 00034 Agreement C8a thru d 00036 Performance Bond C9-1 thru -4 00038 Payment Bond C10-1 thru -4 00040 Bid Bond (submit with bid) BB-1 00042 Worker’s Compensation Insurance Certificate C11-1 thru -2 00044 Certificate of Insurance C12 00046 Iran Contracting Act Certification C13-1 thru 4 00050 Cal-OSHA form 300A (submit with bid) C16-1 thru -2 00052 Contractor’s Cal Osha Compliance History and SIC Code (submit with bid) C17-1 thru -2 00056 Employee Safety & Health Training Records C19-1 thru -2 00057 Contractor Registration Extract(s) (submit with bid) C22-1 thru -2 GENERAL CONDITIONS PAGE 00062 Section E, Inspection & Tests E-1 thru -2 00064 Section F, Labor & Construction F-1 thru -58 Includes Exhibit A – Escrow Agreement 00066 Section H Permits H-1 thru -2 SPECIAL CONDITIONS PAGE 00100 Special Conditions SC-1 thru SC-20 CONTRACT DRAWINGS 00200 Section P Standard & Construction Drawings (list) P-1 thru P-2 00010-1 Table of Contents EMWD DETAILED PROVISIONS 01000 General Safety Requirements 1 thru 8 01026 Schedule of Values 1 thru 6 01381 Pre-Const. Audio Video Taping Above Ground Facilities 1 thru 4 01430 Operation and Maintenance Data 1 thru 10 01610 General Equipment Stipulations (Custom) 1 thru 6 01611 Meteorological and Seismic Design Criteria (Custom) 1 thru 8 01612 Product Delivery Requirements (Custom) 1 thru 2 01614 Product Storage and Handling Requirements (Custom) 1 thru 2 01650 Commissioning (Custom) 1 thru 16 01820 Demonstration and Training (Custom) 1 thru 4 02050 Demolition and Salvage 1 thru 2 02201 Construction Methods and Earthwork 1 thru 26 02210 Site Grading 1 thru 8 02221 Trenching, Backfilling, and Compacting 1 thru 10 02252 Control Density Fill 1 thru 4 02303 Bypass Pumping (Custom) 1 thru 4 02444 Chain Link Fencing 1 thru 6 02513 Asphalt Concrete Paving 1 thru 4 02704 Pipeline Pressure and Leakage Testing (Custom) 1 thru 4 02718 Installation of Water Pipeline 1 thru 22 03150 Formwork 1 thru 6 03200 Reinforcing 1 thru 6 03300 Cast-in-Place Concrete 1 thru 38 03600 Grouting (Custom) 1 thru 2 04220 Concrete Masonry Unit 1 thru 12 05100 Structural Metals 1 thru 6 05550 Anchorage in Concrete and Masonry (Custom) 1 thru 8 07920 Sealants and Caulking 1 thru 6 00010-2 Table of Contents VOLUME 2 EMWD DETAILED PROVISIONS (Continued) 09900 Painting and Protective Coatings 1 thru 48 11005 General Mechanical and Equipment 1 thru 18 11354 Activated Carbon Unit (Custom) 1 thru 20 11356 Odor Control Fans (Custom) 1 thru 12 11357 Odor Control Dampers and Valves (Custom) 1 thru 6 15020 Misc. Piping and Accessories Installation (Custom) 1 thru 12 15066 Fiberglass Reinforced Plastic Pipe (Air Service) (Custom) 1 thru 10 15067 Miscellaneous Plastic Pipe, Tubing, and Accessories (Custom) 1 thru 6 15081 Gaskets 1 thru 2 15089 Nuts and Bolts 1 thru 2 15094 Backflow Preventer (Custom) 1 thru 2 15104 Ball Valves 1 thru 4 15140 Pipe Supports (Custom) 1 thru 12 15400 Plumbing (Custom) 1 thru 18 15430 Emergency Eyewash/Shower Units 1 thru 4 15990 Testing, Adjusting, and Balancing (Custom) 1 thru 6 16010 General Electrical Requirements 1 thru 28 16040 Short Circuit Arc Flash Study 1 thru 26 16050 Basic Electrical Materials and Methods (Custom) 1 thru 20 16150 Induction Motors 1 thru 22 16160 Variable Frequency Drives 1 thru 30 16950 Custom Control Panels 1 thru 30 17005 General I&C Components 1 thru 32 17010 Programmable Logic Controller 1 thru 32 17550 Software Control Block Descriptions (Custom) 1 thru 8 17561 Panel Mounted Instruments (Custom) 1 thru 10 17564 Process Analytical Instruments (Custom) 1 thru 6 APPENDICES Appendix A Approved Materials List Appendix B Geotechnical Investigation Report 00010-3 Table of Contents [PAGE LEFT INTENTIONALLY BLANK] 00010-4 Table of Contents SPECIFICATIONS - DETAILED PROVISIONS Section 09900 - Painting and Protective Coatings C O N T E N T S PART 1 - GENERAL ....................................................................................................................................... 1 1.01 SCOPE ................................................................................................................................................ 1 1.02 Warranty ............................................................................................................................................ 2 1.03 CONTRACTOR ...................................................................................................................................... 3 1.04 DEFINITIONS ....................................................................................................................................... 4 1.05 HOURS OF WORK ................................................................................................................................. 4 1.06 PRE-JOB CONFERENCE .......................................................................................................................... 4 1.07 QUALITY ASSURANCE............................................................................................................................ 5 1.08 SAFETY AND HEALTH REQUIREMENTS ...................................................................................................... 5 1.09 REFERENCE SPECIFICATIONS AND STANDARDS .......................................................................................... 8 1.10 COMPLIANCE WITH ENVIRONMENTAL REGULATORY REQUIREMENTS ......................................................... 11 1.11 SUBMITTALS ..................................................................................................................................... 11 1.12 PROTECTION OF WORK ....................................................................................................................... 12 PART 2 - PRODUCTS .................................................................................................................................. 13 2.01 GENERAL .......................................................................................................................................... 13 2.02 PAINT AND COATING MATERIALS .......................................................................................................... 14 2.03 SERVICE CONDITION A ........................................................................................................................ 15 2.04 SERVICE CONDITION B ........................................................................................................................ 15 2.05 SERVICE CONDITION C ........................................................................................................................ 16 2.06 SERVICE CONDITION D ........................................................................................................................ 17 2.07 SERVICE CONDITION E ........................................................................................................................ 19 2.08 SERVICE CONDITION F......................................................................................................................... 21 2.09 SERVICE CONDITION G ........................................................................................................................ 22 2.10 SERVICE CONDITION H ........................................................................................................................ 22 2.11 SERVICE CONDITION I ......................................................................................................................... 23 2.12 ARCHITECTURAL PAINT FINISHES .......................................................................................................... 26 2.13 MISCELLANEOUS COATINGS ................................................................................................................. 33 PART 3 - EXECUTION ................................................................................................................................. 33 3.01 GENERAL .......................................................................................................................................... 33 3.02 QUALITY CONTROL ............................................................................................................................. 35 3.03 SURFACE PREPARATION, GENERAL - INDUSTRIAL ....................................................................................
Load more

Recommended publications
  • Minimoog Model D Manual
    3 IMPORTANT SAFETY INSTRUCTIONS WARNING - WHEN USING ELECTRIC PRODUCTS, THESE BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED. 1. Read all the instructions before using the product. 2. Do not use this product near water - for example, near a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming pool or the like. 3. This product, in combination with an amplifier and headphones or speakers, may be capable of producing sound levels that could cause permanent hearing loss. Do not operate for a long period of time at a high volume level or at a level that is uncomfortable. 4. The product should be located so that its location does not interfere with its proper ventilation. 5. The product should be located away from heat sources such as radiators, heat registers, or other products that produce heat. No naked flame sources (such as candles, lighters, etc.) should be placed near this product. Do not operate in direct sunlight. 6. The product should be connected to a power supply only of the type described in the operating instructions or as marked on the product. 7. The power supply cord of the product should be unplugged from the outlet when left unused for a long period of time or during lightning storms. 8. Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. There are no user serviceable parts inside. Refer all servicing to qualified personnel only. NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules.
    [Show full text]
  • NIST Time and Frequency Services (NIST Special Publication 432)
    Time & Freq Sp Publication A 2/13/02 5:24 PM Page 1 NIST Special Publication 432, 2002 Edition NIST Time and Frequency Services Michael A. Lombardi Time & Freq Sp Publication A 2/13/02 5:24 PM Page 2 Time & Freq Sp Publication A 4/22/03 1:32 PM Page 3 NIST Special Publication 432 (Minor text revisions made in April 2003) NIST Time and Frequency Services Michael A. Lombardi Time and Frequency Division Physics Laboratory (Supersedes NIST Special Publication 432, dated June 1991) January 2002 U.S. DEPARTMENT OF COMMERCE Donald L. Evans, Secretary TECHNOLOGY ADMINISTRATION Phillip J. Bond, Under Secretary for Technology NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY Arden L. Bement, Jr., Director Time & Freq Sp Publication A 2/13/02 5:24 PM Page 4 Certain commercial entities, equipment, or materials may be identified in this document in order to describe an experimental procedure or concept adequately. Such identification is not intended to imply recommendation or endorsement by the National Institute of Standards and Technology, nor is it intended to imply that the entities, materials, or equipment are necessarily the best available for the purpose. NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY SPECIAL PUBLICATION 432 (SUPERSEDES NIST SPECIAL PUBLICATION 432, DATED JUNE 1991) NATL. INST.STAND.TECHNOL. SPEC. PUBL. 432, 76 PAGES (JANUARY 2002) CODEN: NSPUE2 U.S. GOVERNMENT PRINTING OFFICE WASHINGTON: 2002 For sale by the Superintendent of Documents, U.S. Government Printing Office Website: bookstore.gpo.gov Phone: (202) 512-1800 Fax: (202)
    [Show full text]
  • Pitch Vs Frequency There Is a Relationship Between Pitch And
    Pitch vs Frequency There is a relationship between pitch and frequency. The faster the vi- bration of something producing a sound, the higher the pitch we tend to perceive that sound to be. This section will discuss this relationship. Frequencies come in all values. between any two frequencies, no matter how close together they are, there is always some other frequency. However, for the purpose of music, this infinitude of possibilities it too great. Over the centuries, the set of all possible frequencies has been categorized into a finite set of frequencies which are used in the playing of music. The first and most important aspect of pitches, is that there, given one pitch, there is another, either higher or lower, which sounds most pleasing, most harmonious when played together with the first. This “interval” (a distance between pitches) is called the octave. Two voices or two instruments played an octave apart, blend together into one sound. In fact so tight is the relationship, that one often says that even if two voices sing a song an octave apart, they are really singing the same note. There is, to some extent, a sort of equivalence between notes an octave apart, so much so, that one says that there is an ”octave equivalence”– things an octave apart are really the same. (Obviously this equivalence is limited in scope, because there are also clearly differences between two sounds an octave apart). As was already discovered by Pythagoras, over 2000 years ago, there is also a very particular relationship between the frequencies of two notes an octave apart.
    [Show full text]
  • The Basics of Harpsichord Tuning Fred Sturm, NM Chapter Norfolk, 2016
    The Basics of Harpsichord Tuning Fred Sturm, NM Chapter Norfolk, 2016 Basic categories of harpsichord • “Historical”: those made before 1800 or so, and those modern ones that more or less faithfully copy or emulate original instruments. Characteristics include use of simple levers to shift registers, relatively simple jack designs, use of either quill or delrin for plectra, all-wood construction (no metal frame or bars). • 20th century re-engineered instruments, applying 20th century tastes and engineering to the basic principle of a plucked instrument. Pleyel, Sperrhake, Sabathil, Wittmeyer, and Neupert are examples. Characteristics include pedals to shift registers, complicated jack designs, leather plectra, and metal frames. • Kit instruments, many of which fall under the historical category. • A wide range of in between instruments, including many made by inventive amateurs. Harpsichords come in many shapes and designs. • They may have one keyboard or two. • They may have only one string per key, or as many as four. • The pitch level of each register of strings may be standard, or an octave higher or lower. These are called, respectively, 8-foot, 4-foot, and 16-foot. • The harpsichord may be designed for A440, for A415, or possibly for some other pitch. • Tuning pins may be laid out as in a grand piano, or they may be on the side of the case. • When there are multiple strings per note, the different registers may be turned on and off using levers or pedals. We’ll start by looking at some of these variables, and how that impacts tuning. Single string instruments These are the simplest instruments, and the easiest to tune.
    [Show full text]
  • Base Station, A850/440 User Manual
    Base Station Telemetry Gateway A850 User Guide valid for A850 firmware release 1.0 SMART WIRELESS SOLUTIONS ADCO N TELEMETRY ADCON TELEMETRY GMBH INKUSTRASSE 24 A-3400 KLOSTERNEUBURG AUSTRIA TEL: +43 | 2243 | 38280-0 FAX: +43 | 2243 | 38280-6 http://www.adcon.at ADCON INTERNATIONAL INC 2050 LYNDELL TERRACE SUITE 120 CA-95616 DAVIS, USA TEL: +1 | 530 | 753-1458 FAX: +1 | 530 | 753-1054 http://www.adcon.at ADCON AUSTRALIA PTY. LTD. ENFIELD PLAZA SA 5058 PO BOX 605 ADELAIDE AUSTRALIA TEL: +61 | 8 | 8260-4682 FAX: +61 | 8 | 8260-4685 http://www.adcon.at Proprietary Notice: The Adcon logo, the A72x, A73x and A74x series, addIT™, addWAVE™, the A840 and A850 Telemetry Gateway, addVANTAGE®, and addVANTAGE Lite are trademarks or registered trade- marks of Adcon Telemetry. All other registered names used throughout this publication are trademarks of their respective owners. Neither the whole nor any part of the information contained in this publication may be repro- duced in any material form except with the prior written permission of Adcon Telemetry. This publication is intended only to assist the reader in the use of the product. Adcon Telemetry shall not be liable for any loss or damage arising from the use of any information in this publica- tion, or any error or omission in such information, or any incorrect use of the product. Document Release: 1.2, September 2007 Copyright ©2001—2007 by Adcon Telemetry GmbH. All rights reserved. CHAPTER 3 Chapter 1. Introduction ________________________________________________ 13 Scope ________________________________________________________________ 13 Conventions ___________________________________________________________ 14 What is the A850 Telemetry Gateway? ____________________________________ 15 Adcon's Telemetry Network _____________________________________________ 18 What's new on the A850 ?_______________________________________________ 20 Chapter 2.
    [Show full text]
  • HP Photosmart A440 Series User Guide Hewlett-Packard Company Notices
    HP Photosmart A440 series User Guide Hewlett-Packard Company notices The information contained in this document is subject to change without notice. All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior written permission of Hewlett-Packard, except as allowed under copyright laws. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. © 2007 Hewlett-Packard Development Company, L.P. Windows, Windows 2000, and Windows XP are U.S. registered trademarks of Microsoft Corporation. Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Contents 1Welcome One touch photo printing at your fingertips ................................................................................3 Find more information ................................................................................................................3 Printer parts ...............................................................................................................................4 Optional accessories .................................................................................................................7
    [Show full text]
  • Tuning Without Tears
    Carey Beebe Harpsichords SYDNEY AUSTRALIA Tuning Without Tears •! Temperament is the division of the various notes of the keyboard and the relationship between them, often producing intentional musical results. •! Tuning is the art of accomplishing this successfully throughout the instrument. •! Beats are the interference between notes — Listen to the beats, not the notes. •!When two notes get closer in tune, the beats progressively slow until they disappear. The interval is then perfectly in tune, or simply perfect. •!Beats are often easier to hear when the interval in question is spread over an octave. •!Pitch level has varied according to location, time and other factors. •!Today’s pitch standard is A440, but many orchestras tune sharper for a more brilliant effect (especially) from modern violins. This annoys singers, wind players and instrument makers. •!Purely for the convenience of keyboard instruments, Baroque pitch is A415, a semitone lower than A440. Also becoming common is French Baroque pitch at A392 (a tone lower than modern pitch). Some period instrument orchestras play in between at Classical pitch, sometimes A425 or A430. •! In Equal Temperament, every note is equally out of tune. Because of the lack of key color and the difficulty of tuning this temperament, latest research shows it wasn’t used until 1917: For most of the nineteenth century, when they thought they were tuning equally, the results were a mere approximation. •!Almost without exception, any harpsichord sounds better in an historic temperament. •!The centre of Western tonality is C, and many historic temperaments are most easily set from c''. Unfortunately, modern convention demands most instrumentalists tune from a'.
    [Show full text]
  • Blended Finance in the Poorest Countries
    Report Blended finance in the poorest countries The need for a better approach Samantha Attridge and Lars Engen April 2019 Readers are encouraged to reproduce material for their own publications, as long as they are not being sold commercially. ODI requests due acknowledgement and a copy of the publication. For online use, we ask readers to link to the original resource on the ODI website. The views presented in this paper are those of the author(s) and do not necessarily represent the views of ODI or our partners. This work is licensed under CC BY-NC-ND 4.0. Cover photo: Indian truckes queue up to leave from the Trade Gate on Pakistani side. Photo credit: Asian Development Bank CC BY-NC-ND 2.0 Acknowledgements The authors would like to thank the peer reviewers who kindly gave their time to provide very helpful critique and comments: Paddy Carter (CDC Group), Charles Kenny (Centre for Global Development), Paul Horrocks (Organisation for Economic Co-operation and Development, OECD), Cécile Sangare (OECD), Tomas Hos (OECD), Soren Andreasen (Association of European Development Finance Institutions, EDFI), Morten Lykke Lauridsen (International Finance Corporation, IFC), Artur Karlin (International Finance Corporation, IFC), Neil Gregory (IFC), Joan Larrea (Convergence), Marcus Manuel (Overseas Development Institute, ODI), Jesse Griffiths (ODI), David Watson (ODI) and Hannah Caddick (ODI). The authors would also like to thank colleagues from the following institutions for engaging in the research, providing comment and information: the Asian Development Bank (ADB), Agence Française de Développement (AFD), African Development Bank (AfDB), CDC Group, the United Kingdom Department for International Development (DFID), European Investment Bank (EIB), EDFI, International Development Association (IDA), IFC, Multilateral Investment Guarantee Agency (MIGA), OECD, Overseas Private Investment Corporation (OPIC), Proparco and Norfund.
    [Show full text]
  • Consoles Ideas on the Following Pages a Fine Pipe Organ Is Pleasing to the Eye As Well As the Next Few Pages Illustrate Some of the Ear
    Create your console from Consoles ideas on the following pages A fine pipe organ is pleasing to the eye as well as The next few pages illustrate some of the ear. From intricate façade casework to a richly the various styles, layouts and console carved console, nothing conveys the organ build- appointments we’ve developed for er’s dedication to quality like fine woodworking. other organ builders. Your console Creating the ideal console design is limited only by your imagina- tion. We help the organ builder create the ideal console for each situation. We offer virtually unlimited The following is a checklist of items which freedom of choice in style, finish, key covering, may be customized to your needs. Please stop control and layout. Our experienced staff will think of this list as a starting point as all assist in the custom design of the console to suit options are not listed. We welcome new the customer’s needs and specifications, matching and interesting challenges. or complementing the architecture, style and finish of the environment in which the console is to be q Console Shell Style installed. q Console Case Wood Designing the right console for your q Panels (Plain, Recessed, Carved) needs q Pedalboard Style Working together, we can create the ideal q Flat or Curved Knee Panel CONSOLES & CONSOLES console for your particular application. Careful q Toe Piston Terraces use of our Console Check Sheet ensures that every q Number and Style of Toe Pistons PARTS console specification and feature is addressed. q Synthetic / Wood Sharps (Pedal) From this information, we produce detailed com- q puter assisted design (CAD) layout drawings and Expression Shoes even stain and finish samples as required for the q Organ Bench builder’s review and approval.
    [Show full text]
  • Second Draft Standard Is Provided for the Purpose of Soliciting Public Comments on the Changes to the First Draft Standard (Public Comment Draft Dated March 6, 2015)
    2015 National Green Building Standard ANSI Standard Revision Process Second Draft Request for Public Comments October 9, 2015 Foreword This Second Draft Standard is provided for the purpose of soliciting public comments on the changes to the first Draft Standard (Public Comment Draft dated March 6, 2015). The first Draft Standard and other committee work on the development of the 2015 edition of the National Green Building Standard can be found at www.homeinnovation.com/ngbs. Those Comments that were Approved or Approved As Modified by the Consensus Committee at their June 18-19, 2015 meeting or September 21, 2015 conference call have been incorporated into this Second Draft Standard, a copy of which is posted at www.homeinnovation.com/ngbs. The changes shown in the Second Draft Standard are now open for public comment. Only those changes to the First Draft that were approved by the Consensus Committee, shown in legislative format in the Second Draft Standard, are open for public comment. The language that has not been changed is shown only for the purpose of providing context for review of the changes. Public comments are accepted through November 23, 2015 via a web-based form available at www.homeinnovation.com/ngbs. Instructions for submitting public comments are included with the web- based form. Note: Prior to publication, the 2015 edition of the NGBS will be editorially reviewed for spelling, grammar, format, and other editorial errors after all substantive changes will have been processed by the Consensus Committee. Suggested editorial corrections are welcome and will be reviewed and incorporated as appropriate.
    [Show full text]
  • A Chromatic Chime Set By: Dan Larson January – 2011
    A Chromatic Chime Set By: Dan Larson January – 2011 (A science fair project for a retired engineer) Why? Just because I could. I have friends who ring bells in church, and I am a closet piano player. When Pablo Casals played a Bach cello sonata VERY fast, someone asked him: why so fast? He answered: Because I can. My son named my creation C Machine, because it plays a C scale. Figure 1 shows the thing in playing position, figure 2 with the black notes in stowed position. The black and white note frames were built completely separate, and connected as the final stage with ball bearing drawer slides. I used copper for black notes for its contrasting color, and its higher density makes the tubes about three quarters of the length of the aluminum white notes. Figure 3 shows a close up of the black note frame. The frames are made of two pieces of plywood with trapezoidal holes, clamped together to hold all of the 3/8 inch dowels at both ends. The tubes, spacers, and supporting dowels are strung together on 1/32 inch wire. The spacers are little fuzzy pom-poms, bought at a craft shop. I originally planned on using plastic beads, but changed to the fuzzes because the dowels are not perfectly straight, causing uneven spaces, and because I feared that the plastic beads might raffle. The wire is 1/32 inch "aircraft cable" sold at a model shop for control surfaces on RC airplanes and sailboats. It is stainless steel, and gold plated, so it is really easy to solder.
    [Show full text]
  • Piano Key Frequencies 1 Piano Key Frequencies
    Piano key frequencies 1 Piano key frequencies This is a virtual keyboard showing the absolute frequencies in hertz (cycles per second) of the notes on a modern piano (typically containing 88 keys) in twelve-tone equal temperament, with the 49th key, the fifth A (called A4), tuned to 440 Hz (referred to as A440). Each successive pitch is derived by multiplying (ascending) or dividing (descending) the previous by the twelfth root of two (approximately 1.05946309435929...). For example, to get the frequency a semitone up from A4 (A♯4), multiply 440 by the twelfth root of two. To go from A4 to B4 (up a whole tone, or two semitones), multiply 440 twice by the twelfth root of two. For other tuning schemes refer to musical tuning. This list of frequencies is for a theoretically ideal piano. On an actual piano the ratio between semitones is slightly larger, especially at the high and low ends, where string stiffness causes inharmonicity, i.e., the tendency for the harmonic makeup of each note to run sharp. To compensate for this, octaves are tuned slightly wide, stretched according to the inharmonic characteristics of each instrument. This deviation from equal temperament is called the Railsback curve. The following equation will give the frequency f of the nth key, as shown in the table: Alternatively, this can be written as: Virtual keyboard An 88-key piano, with the octaves numbered and Middle C (cyan) and A440 (yellow) highlighted. Key Helmholtz Scientific Frequency (Hz) Corresponding Open Strings number name name Violin Viola Cello Bass Guitar
    [Show full text]