2018 Dodge Journey User's Guide

Whether it’s providing information about specific product features, taking a tour through your vehicle’s heritage, knowing what steps to take following an accident or scheduling your next appointment, we know you’ll find the app an important extension of your Dodge brand vehicle. Simply download the app, select your make and model and enjoy the ride. To get this app, go directly to the App Store or Google Play and enter the search DOWNLOAD A FREE ELECTRONIC keyword “Dodge” (U.S. residents only). COPY OF THE MOST UP-TO-DATE www.dodge.com/en/owners (U.S.) or www.owners.mopar.ca OWNER’S MANUAL, MEDIA AND (Canada) provides special offers tailored to your needs, WARRANTY BOOKLET BY VISITING: 2018 customized vehicle galleries, personalized service records and more. To get this information, just create an account JOURNEY and check back often. WWW.MOPAR.COM/EN-US/CARE/OWNERS-MANUAL.HTML Get warranty and other information online – you can review (U.S. RESIDENTS); and print or download a copy of the Owner’s Manual, WWW.OWNERS.MOPAR.CA USER GUIDE SECOND EDITION JOURNEY 18JC-926-AA USER Navigation/Uconnect manuals and the limited warranties provided by FCA US LLC for your vehicle by visiting (CANADIAN RESIDENTS). www.dodge.com/en/owners (U.S.) or www.owners.mopar.ca (Canada). Click on the applicable link in the “Popular Topics” DODGE.COM (U.S.)

GUIDE area of the www.dodge.com/en/owners (U.S.) or www.owners.mopar.ca (Canada) homepage and follow the DODGE.CA (CANADA) instructions to select the applicable year, make and model of your vehicle.

3069421_18b_Journey_UG_080417.indd 1 8/4/17 9:48 AM DODGE.COM (U.S.) IMPORTANT DODGE.CA (CANADA)

Get warranty and other information online – you can review and print or download a copy of the Owner’s Manual, This guide has been prepared to help you get quickly Navigation/Uconnect manuals and the limited warranties provided by FCA US LLC for your vehicle by visiting acquainted with your new Dodge brand vehicle and to provide www.mopar.com (U.S.) or www.owners.mopar.ca (Canada). Click on the applicable link in the “Popular Topics” area of a convenient reference source for common questions. However, the www.mopar.com (U.S.) or www.owners.mopar.ca (Canada) homepage and follow the instructions to select the it is not a substitute for your Owner’s Manual. DRIVING AND ALCOHOL applicable year, make and model of your vehicle. Drunken driving is one of the most frequent causes of For complete operational instructions, maintenance procedures collisions. Your driving ability can be seriously impaired with and important safety messages, please consult your Owner’s blood alcohol levels far below the legal minimum. If you are The driver’s primary responsibility is the safe operation of the vehicle. Driving while distracted can result in loss of Manual, Navigation/Uconnect manuals found on the website drinking, don’t drive. Ride with a designated non-drinking vehicle control, resulting in a collision and personal injury. FCA US LLC strongly recommends that the driver on the back cover and other Warning Labels in your vehicle. driver, call a cab, a friend, or use public transportation. use extreme caution when using any device or feature that may take their attention off the road. Use of any electrical devices, such as cellular telephones, computers, portable radios, vehicle navigation or Not all features shown in this guide may apply to your vehicle. other devices, by the driver while the vehicle is moving is dangerous and could lead to a serious collision. For additional information on accessories to help personalize Texting while driving is also dangerous and should never be done while the vehicle is moving. If you find yourself unable your vehicle, visit www.mopar.com (U.S.), www.mopar.ca WARNING! to devote your full attention to vehicle operation, pull off the road to a safe location and stop your vehicle. Some states (Canada) or your local Dodge brand dealer. or provinces prohibit the use of cellular telephones or texting while driving. It is always the driver’s responsibility to Driving after drinking can lead to a collision. Your perceptions comply with all local laws. are less sharp, your reflexes are slower, and your judgment is impaired when you have been drinking. Never drink and then drive.

3069421_18b_Journey_UG_080417.indd 2 8/4/17 9:48 AM Congratulations on selecting your new FCA US This User Guide has been prepared to help you For more detailed descriptions of the topics LLC US FCA FROM WELCOME LLC vehicle. Be assured that it represents pre- quickly become acquainted with the important discussed in this User Guide, as well as infor- cision workmanship, distinctive styling, and features of your vehicle. It contains most things mation covering features and processes not cov- high quality. you will need to operate and maintain the ve- ered in this User Guide, the full vehicle Owner’s hicle, including emergency information. Manual can be accessed for free online in a ALWAYS drive safely and pay attention to the printer-friendly PDF format. road. ALWAYS drive safely with your hands on When it comes to service, remember that your the steering wheel. You have full responsibility authorized dealer knows your vehicle best, has To get the full Owner’s Manual or applicable and assume all risks related to the use of the factory-trained technicians and genuine supplement for your vehicle, follow the appro- features and applications in this vehicle. Only MOPAR® parts, and cares about your satisfac- priate web address below: use the features and applications when it is safe tion. www.mopar.com/en-us/care/owners-manual.html to do so. Failure to do so may result in an (U.S. Residents) accident involving serious injury or death. HOW TO FIND YOUR OWNER’S www.owners.mopar.ca (Canadian Residents) This guide illustrates and describes the opera- MANUAL ONLINE FCA US LLC is committed to protecting our tion of features and equipment that are either This publication has been prepared as a refer- environment and natural resources. By convert- standard or optional on this vehicle. This guide ence item to help you quickly become ac- ing from paper to electronic delivery for the may also include a description of features and quainted with the most important features and majority of the user information for your vehicle, equipment that are no longer available or were together we greatly reduce the demand for tree- processes of your vehicle. It contains most not ordered on this vehicle. Please disregard any based products and lessen the stress on our things you will need to operate and maintain the features and equipment described in this guide environment. vehicle, including emergency information and that are not available on this vehicle. FCA US procedures. LLC reserves the right to make changes in design and specifications and/or make additions This User Guide is not a replacement for the full to or improvements to its products without im- Owner’s Manual, and does not fully cover every posing any obligation upon itself to install them operation and procedure possible with your ve- on products previously manufactured. hicle.

1 HOW TO USE THIS MANUAL with steering wheel on the right side, the posi- WARNINGS AND CAUTIONS tion or construction of some controls is not Essential Information exactly mirror-like with respect to the figure. While reading this User Guide you will find a series of WARNINGS to be followed to prevent To identify the chapter with the information Each time direction instructions (left/right or incorrect use of components which could cause needed you can consult the index at the end of forwards/backwards) about the vehicle are accidents or injuries. given, these must be intended as regarding an this User Guide. occupant in the driver's seat. Special cases not Chapters can be rapidly identified with dedi- There are also CAUTIONS that must be followed complying with this rule will be properly speci- cated graphic tabs, at the side of each odd to prevent against procedures that could result fied in the text. page. A few pages further there is a key for in damage to your vehicle. getting to know the chapter order and the rel- The figures in this User Guide are provided by evant symbols in the tabs. There is anyway a way of example only: this might imply that some textual indication of the current chapter at the details of the image do not correspond to the side of each even page. actual arrangement of your vehicle.

HOW TO USE THIS MANUAL Symbols In addition, the User Guide has been conceived considering vehicles with steering wheel on the Some vehicle components have colored labels left side; it is therefore possible that on vehicles whose symbols indicate precautions to be observed when using this component.

2 GRAPHICAL TABLE OF CONTENTS GETTING TO KNOW YOUR VEHICLE GETTING TO KNOW YOUR INSTRUMENT PANEL SAFETY STARTING AND OPERATING IN CASE OF EMERGENCY SERVICING AND MAINTENANCE TECHNICAL SPECIFICATIONS MULTIMEDIA CUSTOMER ASSISTANCE INDEX 4 GRAPHICAL TABLE OF CONTENTS

GRAPHICAL TABLE OF CONTENTS INSTRUMENT PANEL ...... 6 INTERIOR...... 7

5 INSTRUMENT PANEL GRAPHICAL TABLE OF CONTENTS

Instrument Panel 1 — Air Vents 4 — Windshield Wiper Lever (Behind Steering Wheel) 2 — Multifunction Lever (Behind Steering Wheel) 5 — Radio 3 — Instrument Cluster 6 — Steering Wheel

6 INTERIOR

Interior 1 — Door Locks/Window Switches 4 — Switch Panel 2 — Seats 5 — Climate Controls 3 — Gear Selector 6 — Glove Compartment

7 8 GETTING TO KNOW YOUR VEHICLE

GETTING TO KNOW YOUR VEHICLE KEYS ...... 11 HEAD RESTRAINTS ...... 22 WIPERS AND WASHERS ...... 28 KeyFob...... 11 Supplemental Active Head Restraints (AHR) Windshield Wiper Operation...... 28 — Front Seats ...... 22 IGNITION SWITCH...... 12 Rear Window Wiper/Washer ...... 29 Rear Head Restraint Adjustment ...... 24 CLIMATE CONTROLS ...... 30 Keyless Push Button Ignition ...... 12 Rear Head Restraint Removal ...... 24 Automatic Climate Controls Overview ....30 REMOTE START — IF EQUIPPED ...... 14 STEERING WHEEL ...... 25 Climate Control Functions...... 40 How To Use Remote Start ...... 14 Tilt/Telescoping Steering Column ...... 25 Operating Tips ...... 41 To Enter Remote Start Mode ...... 14 Heated Steering Wheel — If Equipped . . .25 POWER SUNROOF — IF EQUIPPED ...... 42 General Information ...... 14 MIRRORS ...... 26 Opening Sunroof ...... 42 VEHICLE SECURITY ALARM — IF EQUIPPED . .15 Heated Mirrors — If Equipped ...... 26 Closing Sunroof...... 42 To Arm The System ...... 15 EXTERIOR LIGHTS...... 26 Wind Buffeting ...... 43 To Disarm The System ...... 15 Multifunction Lever ...... 26 Anti Pinch Protect Feature ...... 43 DOORS ...... 16 Headlights ...... 26 Venting Sunroof — Express ...... 43 Keyless Enter-N-Go — Passive Entry (If High Beam/Low Beam Select Switch ....27 HOOD ...... 43 Equipped) ...... 16 Automatic Headlights ...... 27 Opening ...... 43 SEATS...... 18 Headlights On With Wipers (Available With Closing...... 44 Automatic Headlights Only) ...... 27 Front Heated Seats...... 19 UNIVERSAL GARAGE DOOR OPENER Fog Lights — If Equipped ...... 27 Manual Folding Second Row Seat ...... 20 (HOMELINK) ...... 44 Turn Signals ...... 27 Stadium Tip 'n Slide (Easy Entry/Exit Seat) — Before You Begin Programming HomeLink .44 Lane Change Assist — If Equipped .....28 Seven Passenger Models ...... 20 Erasing All The HomeLink Channels .....45 Manual Folding Third Row Seats ...... 21 9 Identifying Whether You Have A Rolling Code Programming HomeLink To A Miscellaneous INTERNAL EQUIPMENT ...... 47 Or Non-Rolling Code Device...... 45 Device ...... 46 Power Outlets ...... 47 Programming HomeLink To A Garage Door Reprogramming A Single HomeLink Power Inverter — If Equipped ...... 50 Opener...... 45 Button ...... 47 General Information ...... 47 GETTING TO KNOW YOUR VEHICLE

10 KEYS To remove the emergency key, slide the me- chanical latch on the back of the key fob side- Key Fob ways with your thumb and then pull the key out with your other hand. Your vehicle uses a keyless ignition system. The ignition system consists of a key fob with Re- NOTE: mote Keyless Entry (RKE) and a START/STOP You can insert the double-sided emergency key push button ignition system. The Remote Key- into the lock cylinders with either side up. less Entry system consists of a key fob and The Remote Keyless Entry system allows you to Keyless Enter-N-Go feature if equipped. lock or unlock the doors, open the liftgate, or activate the Panic Alarm from distances up to NOTE: approximately 66 ft (20 m) using a hand-held The key fob may not be found if it is located next key fob with key fob. The key fob does not need to a mobile phone, laptop or other electronic to be pointed at the vehicle to activate the Key Fob device; these devices may block the key fob’s system. wireless signal. 1 — Unlock NOTE: The Remote Keyless Entry (RKE) key fob and an 2 — Lock Driving at speeds 5 MPH (8 km/h) and above 3 — Remote Start emergency key, which stores in the rear of the disables the system from responding to all key 4 — Panic Button key fob. fob buttons for all key fobs. 5 — Emergency Key The emergency key allows for entry into the vehicle should the battery in the vehicle or the key fob go dead. The emergency key is also for locking the glove compartment. You can keep the emergency key with you when valet parking.

11 To Unlock The Doors And Liftgate The Panic Alarm will stay on for three minutes 2. This device must accept any interference unless you turn it off by either pushing the Panic received, including interference that may Push and release the unlock button on the key button a second time or drive the vehicle at a cause undesired operation. fob once to unlock the driver's door or twice speed of 15 mph (24 km/h) or greater. within five seconds to unlock all doors and the NOTE: liftgate. NOTE: Changes or modifications not expressly approved by the party responsible for compliance To Lock The Doors And Liftgate • The interior lights will turn off if you place the ignition in the ACC or ON/RUN position while could void the user’s authority to operate the Push and release the lock button on the key fob the Panic Alarm is activated. However, the equipment. to lock all doors and liftgate. exterior lights and horn will remain on. IGNITION SWITCH Vehicles Equipped With Keyless Enter-N-Go — • You may need to be less than 35 ft (11 m) Passive Entry from the vehicle when using the key fob to Keyless Push Button Ignition If one or more doors are open, or the liftgate is turn off the Panic Alarm due to the radio This feature allows the driver to operate the open, the doors will lock. The doors will unlock frequency noises emitted by the system. ignition with the push of a button as long as the again automatically if the key is left inside the General Information key fob is in the passenger compartment. passenger compartment, otherwise the doors will stay locked. The following regulatory statement applies to all The Keyless Push Button Ignition has four op-

GETTING TO KNOW YOUR VEHICLE radio frequency (RF) devices equipped in this erating positions, three of which are labeled and Using The Panic Alarm vehicle: will illuminate when in position. The three po- To turn the Panic Alarm feature on or off, push This device complies with Part 15 of the FCC sitions are OFF, ACC, and ON/RUN. The fourth the Panic button on the key fob. When the Panic Rules and with Industry Canada license-exempt position is START. During start, ON/RUN will Alarm is activated, the turn signals will flash, RSS standard(s). Operation is subject to the illuminate. the horn will pulse on and off, and the interior following two conditions: lights will turn on. 1. This device may not cause harmful interference, and

12 NOTE: OFF WARNING! If the ignition switch does not change with the • The engine is stopped. push of a button, the key fob may have a low or fatally injured. Children should be warned dead battery. In this situation, a back up • Some electrical devices (e.g. Central locking, not to touch the parking brake, brake pedal method can be used to operate the ignition alarm, etc.) are still available. or the gear selector. • Do not leave the key fob in or near the switch. Put the nose side (side opposite of the ACC vehicle, or in a location accessible to chil- emergency key) of the key fob against the EN- • Engine is not started. dren, and do not leave the ignition of a GINE START/STOP button and push to operate vehicle equipped with Keyless Enter-N-Go the ignition switch. • Some electrical devices are available. in the ON/RUN mode. A child could oper- RUN ate power windows, other controls, or move • Driving position. the vehicle. • Do not leave children or animals inside • All the electrical devices are available. parked vehicles in hot weather. Interior START heat build-up may cause serious injury or death. • The engine will start.

WARNING! CAUTION!

• When exiting the vehicle, always remove An unlocked vehicle is an invitation for the key fob from the vehicle and lock your thieves. Always remove key fob from the vehicle. vehicle and lock all doors when leaving the • Never leave children alone in a vehicle, or vehicle unattended. with access to an unlocked vehicle. START/STOP Ignition Button • Allowing children to be in a vehicle unat- NOTE: Refer to "Starting The Engine," in "Starting And The push button ignition can be placed in the tended is dangerous for a number of rea- Operating" in the Owner’s Manual for further following modes: sons. A child or others could be seriously or information. 13 REMOTE START — IF EQUIPPED • For security, power window and power sunroof WARNING! operation (if equipped) are disabled when the How To Use Remote Start less and colorless. Carbon Monoxide is vehicle is in the Remote Start mode. poisonous and can cause serious injury or • The engine can be started two consecutive All of the following conditions must be met death when inhaled. times (two 15-minute cycles) with the key before the engine will remote start: • Keep key fobs away from children. Opera- fob. However, the ignition must be cycled to • Gear selector in PARK tion of the Remote Start System, windows, door locks or other controls could cause the RUN position before you can repeat the • Doors closed serious injury or death. start sequence for a third cycle. • Hood closed General Information • Liftgate closed To Enter Remote Start Mode The following regulatory statement applies to all • HAZARD switch off Push and release the remote start button on the radio frequency (RF) devices equipped in this • BRAKE switch inactive (brake pedal not key fob twice within five seconds. The vehicle vehicle: pushed) doors will lock, the parking lights will flash and the horn will chirp twice (if programmed). Then, This device complies with Part 15 of the FCC • Battery at an acceptable charge level the engine will start and the vehicle will remain Rules and with Industry Canada license-exempt • System not disabled from previous remote in the Remote Start mode for a 15-minute RSS standard(s). Operation is subject to the start event cycle. following two conditions: GETTING TO KNOW YOUR VEHICLE • Vehicle security alarm not active NOTE: 1. This device may not cause harmful interfer- • Ignition in OFF position ence, and • If an engine fault is present or fuel level is low, 2. This device must accept any interference WARNING! the vehicle will start and then shut down in 10 seconds. received, including interference that may cause undesired operation. • Do not start or run an engine in a closed • The park lamps will turn on and remain on garage or confined area. Exhaust gas con- during Remote Start mode. tains Carbon Monoxide (CO) which is odor-

14 NOTE: To Arm The System • Grasp the Passive Entry Unlock Door Handle Changes or modifications not expressly ap- with a valid key fob within 5 ft (1.5 m) of the proved by the party responsible for compliance Follow these steps to arm the vehicle security passive entry door handle (if equipped, refer could void the user’s authority to operate the alarm: to "Keyless Enter-N-Go — Passive Entry" in equipment. 1. Make sure the vehicle ignition system is OFF "Getting To Know Your Vehicle" for further (refer to "Starting The Engine" in "Starting information). VEHICLE SECURITY ALARM — IF And Operating" for further information). • Cycle the vehicle ignition system out of the OFF position. EQUIPPED 2. Perform one of the following methods to lock – For vehicles equipped with Keyless the vehicle: The vehicle security alarm monitors the vehicle Enter-N-Go — Passive Entry, push the doors and liftgate for unauthorized entry and the • Push lock on the interior power door lock Keyless Enter-N-Go — Ignition Start/Stop Keyless Enter-N-Go Start/Stop button for unau- switch with the driver and/or passenger button (requires at least one valid key fob thorized operation. While the vehicle security door open. in the vehicle). alarm is armed, interior switches for door locks – For vehicles not equipped with Keyless • Push the lock button on the exterior Pas- are disabled. If something triggers the alarm, sive Entry Door Handle with a valid key fob Enter-N-Go, insert a valid key into the the vehicle security alarm will provide the fol- available in the same exterior zone (refer ignition switch and turn the key to the ON lowing audible and visible signals: the horn will to "Keyless Enter-N-Go — Passive Entry" position. pulse, the headlights will turn on, the park in "Getting To Know Your Vehicle" for fur- NOTE: lamps and/or turn signals will flash, and the ther information). vehicle security light in the instrument cluster • The driver's door key cylinder and the liftgate will flash. • Push the lock button on the key fob. button on the key fob cannot arm or disarm 3. If any doors are open, close them. the vehicle security alarm. To Disarm The System • When the vehicle security alarm is armed, the interior power door lock switches will not un- The vehicle security alarm can be disarmed lock the doors. using any of the following methods: • Push the unlock button on the key fob. 15 The vehicle security alarm is designed to protect NOTE: your vehicle; however, you can create conditions • Passive Entry may be programmed ON/OFF; where the system will give you a false alarm. If refer to “Uconnect Settings” in “Multimedia” one of the previously described arming se- in the Owner’s Manual for further information. quences has occurred, the vehicle security alarm will arm regardless of whether you are in • If wearing gloves on your hands, or if it has the vehicle or not. If you remain in the vehicle been raining/snowing on the Passive Entry door handle, the unlock sensitivity can be and open a door, the alarm will sound. If this affected, resulting in a slower response time. occurs, disarm the vehicle security alarm. • If the vehicle is unlocked by Passive Entry and If the vehicle security alarm is armed and the no door is opened within 60 seconds, the battery becomes disconnected, the vehicle se- vehicle will re-lock and if equipped will arm curity alarm will remain armed when the battery the security alarm. is reconnected; the exterior lights will flash, the • The key fob may not be detected by the horn will sound. If this occurs, disarm the ve- Grabbing The Door Handle hicle security alarm. vehicle passive entry system if it is located next to a mobile phone, laptop, or other elec- NOTE: DOORS tronic device; these devices may interfere with If “Unlock All Doors 1st Press” is programmed the key fob’s wireless signal and prevent the GETTING TO KNOW YOUR VEHICLE all doors will unlock when you grab hold of the Keyless Enter-N-Go — Passive Entry (If passive entry system from locking/unlocking driver’s front door handle. To select between Equipped) the vehicle. “Unlock Driver Door 1st Press” and “Unlock All To Unlock From The Driver's Side: Doors 1st Press,” refer to “Uconnect Settings” The Passive Entry system is an enhancement to in “Multimedia” in the Owner’s Manual for the vehicle’s Remote Keyless Entry (RKE) sys- With a valid Passive Entry key fob within 5 ft further information. tem and a feature of Keyless Enter-N-Go. This (1.5 m) of the driver's door handle, grab the feature allows you to lock and unlock the vehi- driver's front door handle to unlock the driver's cle’s door(s) without having to push the key fob door automatically. The interior door panel lock lock or unlock buttons. knob will raise when the door is unlocked. 16 To Unlock From The Passenger Side: If one of the vehicle doors is open and the vehicle is locked with a door panel switch, key With a valid Passive Entry key fob within 5 ft fob button or door handle button, once all open (1.5 m) of the passenger door handle, grab the doors have been closed the vehicle checks the front passenger door handle to unlock all four inside and outside of the vehicle for any valid doors and the liftgate automatically. Passive Entry key fobs. If one of the vehicle's NOTE: Passive Entry key fobs is detected inside the All doors and the liftgate will unlock when the vehicle, and no other valid Passive Entry key front passenger door handle is grabbed regard- fobs are detected outside the vehicle, the Pas- less of the driver’s door unlock preference set- sive Entry System automatically unlocks all ve- ting (“Unlock Driver Door 1st Press” or “Unlock hicle doors and chirps the horn three times (on All Doors 1st Press”). the third attempt, ALL doors will lock and the Passive Entry key fob can be locked in the Preventing Inadvertent Locking Of Passive Entry vehicle). Key Fob In Vehicle: To Enter The Liftgate: Electronic Liftgate Lock/Unlock Pad To minimize the possibility of unintentionally locking a Passive Entry key fob inside your With a valid Passive Entry key fob within 5 ft vehicle, the Passive Entry system is equipped (1.5 m) of the liftgate, push the button under- with an automatic door unlock feature which neath the left side of the accent bar, which is will function if the ignition is OFF. located on the liftgate below the glass, to lock or unlock the vehicle.

17 To Lock The Vehicle’s Doors: • If Passive Entry is disabled using Uconnect System, the key protection described in "Pre- With one of the vehicle’s Passive Entry key fobs venting Inadvertent Locking of Passive Entry within 5 ft (1.5 m) of the driver or passenger key fob in Vehicle" remains active/functional. front door handle, push the door handle lock button to lock all four doors and liftgate. • The Passive Entry system will not operate if the key fob battery is dead. The vehicle doors can also be locked by using the key fob lock button or the lock button located on the vehicle’s interior door panel. SEATS

Seats are a part of the Occupant Restraint Do NOT Grab The Handle When Locking System of the vehicle. NOTE: WARNING! • After pushing the door handle button, you

GETTING TO KNOW YOUR VEHICLE • It is dangerous to ride in a cargo area, must wait two seconds before you can lock or inside or outside of a vehicle. In a collision, unlock the doors, using either Passive Entry Push The Door Handle Button To Lock people riding in these areas are more likely door handle. This is done to allow you to check to be seriously injured or killed. Do NOT grab the door handle, when pushing the if the vehicle is locked by pulling the door • Do not allow people to ride in any area of door handle button. This could unlock the handle, without the vehicle reacting and un- your vehicle that is not equipped with seats door(s). locking. and seat belts. In a collision, people riding in these areas are more likely to be seriously injured or killed.

18 If the HI-level setting is selected, the system will WARNING! automatically switch to LO-level after approxi- WARNING! • Be sure everyone in your vehicle is in a seat mately 60 minutes of continuous operation. At • Persons who are unable to feel pain to the and using a seat belt properly. that time, the display will change from HI to LO, skin because of advanced age, chronic indicating the change. The LO-level setting will illness, diabetes, spinal cord injury, medi- Front Heated Seats turn off automatically after approximately 45 cation, alcohol use, exhaustion or other minutes. If your vehicle is equipped with front heated physical condition must exercise care seats, the control buttons are located within the NOTE: when using the seat heater. It may cause Uconnect system. You can gain access to the The engine must be running for the heated seats burns even at low temperatures, especially control buttons through the climate screen or to operate. if used for long periods of time. • Do not place anything on the seat or seat- the controls screen. Vehicles Equipped With Remote Start back that insulates against heat, such as a • Press the heated seat button once to turn On models that are equipped with remote start, blanket or cushion. This may cause the the HI setting on. the heated seats can be programmed to come seat heater to overheat. Sitting in a seat • Press the heated seat button a second on during a remote start. that has been overheated could cause se- time to turn the LO setting on. rious burns due to the increased surface This feature can be programmed through the temperature of the seat. • Press the heated seat button a third time Uconnect system. Refer to “Uconnect Settings” to turn the heating elements off. in “Multimedia” in your Owner’s Manual for further information.

19 Manual Folding Second Row Seat 3. Lift the control lever with the other hand, WARNING! allow the seatback to move forward slightly, To Fold The Seat and then release the lever. securely locked into position the seat will not provide the proper stability for child seats WARNING! and/or passengers. An improperly latched seat could cause serious injury. To prevent personal injury or damage to objects, keep your head, arms, and objects out Stadium Tip 'n Slide (Easy Entry/Exit Seat) of the folding path of the seatback. — Seven Passenger Models 4. Gently guide the seatback into the folded This feature allows passengers to easily enter or position. exit the third-row passenger seats from either side of the vehicle. NOTE: You may experience deformation in the seat To Move The Second-Row Passenger Seat For- cushion from the seat belt buckles if the seats ward are left folded for an extended period of time. NOTE: This is normal and by simply opening the seats Raise the seatback/armrest before moving the Rear Seat Lever Locations to the open position, over time the seat cushion

GETTING TO KNOW YOUR VEHICLE seat to allow for full seat travel. 1 — Forward/Rearward Adjustment Lever will return to its normal shape. 2 — Recliner/Seatback Release Lever To Unfold The Seat Move the control lever on the upper outboard 3 — Tip ’n Slide Control Lever side of the seatback forward. Then, in one fluid Raise the seatback and lock it in place. motion, the seat cushion flips upward and the seat moves forward on its tracks. 1. Locate the control lever on the lower out- WARNING! board side of the seat. Be certain that the seatback is securely 2. Place one hand on the seatback and apply a locked into position. If the seatback is not gentle pressure. 20 WARNING! Manual Folding Third Row Seats follow this warning may result in personal To provide additional storage area, each third- injury. row passenger seatback can be folded flat. This allows for extended cargo space and still main- To Unfold And Move The Second-Row Passen- tains some rear seating room if needed. ger Seat Rearward NOTE: Move the seatback rearward until it locks in Prior to folding the third-row passenger seat- place and then continue sliding the seat rear- back, make sure the second-row passenger ward on its tracks until it locks in place. seatback is not in a reclined position. This will Push the seat cushion downward to lock it in allow the seatback to fold easily. place. To Fold The Seatback Adjust the seat track position as desired. Using Pull the latch release-loop located at the top of Seat In Tip ‘n Slide Position body pressure, move forward and rearward on the seat to be sure that the seat adjusters have the seatback upward, push the seatback for- NOTE: latched. ward slightly, and release the release-loop. A hand-grip is molded into the front of each Then, continue to push the seatback forward. quarter trim panel near the door opening to WARNING! The head restraints will fold automatically as assist entry and exit from the third-row passen- the seatback moves forward. ger seats. Be certain that the seatback is securely locked into position. If the seatback is not NOTE: You may experience deformation in the seat WARNING! securely locked into position the seat will not provide the proper stability for child seats cushion from the seat belt buckles if the seats Do not drive the vehicle with the seat in this and/or passengers. An improperly latched are left folded for an extended period of time. position, as it is only intended for entering seat could cause serious injury. This is normal and by simply opening the seats and exiting the third row seats. Failure to to the open position, over time the seat cushion will return to its normal shape. 21 To Unfold The Seatback WARNING! Supplemental Active Head Restraints (AHR) — Front Seats Grasp the assist strap loop on the seatback and folded flat. In a collision, the passenger pull it toward you to raise the seatback. Con- could slide underneath the seat belt and Supplemental Active Head Restraints are pas- tinue to raise the seatback until it locks in place. be seriously or even fatally injured. sive, deployable components, and vehicles with Raise the head restraint to lock it in place. this equipment can not be readily identified by The seatback can also be locked in the reclined HEAD RESTRAINTS any markings, only through visual inspection of position. To do so, pull the latch release-loop the head restraint. The head restraint will be located at the top of the seatback upward, allow Head restraints are designed to reduce the risk split in two halves, with the front half being soft the seatback to recline, and release the of injury by restricting head movement in the foam and trim, the back half being decorative release-loop. event of a rear impact. Head restraints should plastic. be adjusted so that the top of the head restraint When AHRs deploy during a rear impact, the is located above the top of your ear. WARNING! front half of the head restraint extends forward • Be certain that the seatback is locked WARNING! to minimize the gap between the back of the securely into position. Otherwise, the seat occupant’s head and the AHR. This system is will not provide the proper stability for • All occupants, including the driver, should designed to help prevent or reduce the extent of passengers. An improperly latched seat not operate a vehicle or sit in a vehicle’s injuries to the driver and front passenger in

GETTING TO KNOW YOUR VEHICLE could cause serious injury. seat until the head restraints are placed in certain types of rear impacts. Refer to “Occu- • Do not allow a passenger to sit in a third their proper positions in order to minimize pant Restraints” in “Safety” in your Owner's row seat without having the head restraint the risk of neck injury in the event of a Manual for further information. unfolded and locked in place. Failure to crash. To raise the head restraint, pull upward on the follow this warning may result in personal • Head restraints should never be adjusted head restraint. To lower the head restraint, push injury to the passenger in the event of a while the vehicle is in motion. Driving a collision. vehicle with the head restraints improperly the adjustment button, located at the base of • Do not allow a passenger to sit in a third adjusted or removed could cause serious the head restraint, and push downward on the row seat with the second row seatback(s) injury or death in the event of a collision. head restraint.

22 Adjustment Button Active Head Restraint (Normal Position) Active Head Restraint (Tilted)

For comfort, the Active Head Restraints can be NOTE: tilted forward and backward. To tilt the head • The head restraints should only be removed by restraint closer to the back of your head, pull qualified technicians, for service purposes forward on the bottom of the head restraint. only. If either of the head restraints require Push rearward on the bottom of the head re- removal, see your authorized dealer. straint to move the head restraint away from your head. • In the event of deployment of an Active Head Restraint, refer to “Occupant Restraints/ Supplemental Active Head Restraints (AHR)/ Resetting Active Head Restraints (AHR)” in “Safety” in your Owner's Manual for further information. 23 WARNING! Rear Head Restraint Adjustment WARNING! The second row seats are equipped with adjust- • All occupants, including the driver, should A loose head restraint thrown forward in a able and removable head restraints. To raise the not operate a vehicle or sit in a vehicle’s collision or hard stop could cause serious head restraint, pull upward on the head re- seat until the head restraints are placed in injury or death to occupants of the vehicle. straint. To lower the head restraint, push the their proper positions in order to minimize Always securely stow removed head re- adjustment button located on the base of the the risk of neck injury in the event of a straints in a location outside the occupant collision. head restraint, and push downward on the head compartment. • Do not place items over the top of the restraint. Active Head Restraint, such as coats, seat Rear Head Restraint Removal covers or portable DVD players. These To remove the head restraint, push the adjust- items may interfere with the operation of ment and the release buttons while pulling the Active Head Restraint in the event of a upward on the whole assembly and raise it up as collision and could result in serious injury or death. far as it can go. To reinstall the headrest, put the • Active Head Restraints may be deployed if headrest posts into the holes while pushing the they are struck by an object such as a release buttons. Then adjust it to the appropri- hand, foot or loose cargo. To avoid acciden- ate height.

GETTING TO KNOW YOUR VEHICLE tal deployment of the Active Head Re- straint ensure that all cargo is secured, as WARNING! loose cargo could contact the Active Head ALL the head restraints MUST be reinstalled Restraint during sudden stops. Failure to in the vehicle to properly protect the occu- follow this warning could cause personal pants. Follow the re-installation instructions injury if the Active Head Restraint is de- Rear Head Restraint above prior to operating the vehicle or occu- ployed. 1 — Release Button pying a seat. 2 — Adjustment Button

24 NOTE: desired. To lengthen or shorten the steering The heated steering wheel control button is For proper routing of a Child Seat Tether, refer to column, pull the steering wheel outward or push located within the Uconnect system. You can “Occupant Restraints” in “Safety” in your Own- it inward as desired. To lock the steering column gain access to the control button through the er's Manual for further information. in position, pull the control handle upward until climate screen or the controls screen. fully engaged. • Press the heated steering wheel button WARNING! once to turn the heating element on. WARNING! Driving a vehicle with the head restraints • Press the heated steering wheel button a removed or improperly adjusted could cause Do not adjust the steering column while driv- second time to turn the heating element off. serious injury or death in the event of a ing. Adjusting the steering column while collision. The head restraints should be driving or driving with the steering column If your vehicle is equipped with automatic tem- checked prior to operating the vehicle and unlocked, could cause the driver to lose con- perature controls with an integrated center never adjusted while the vehicle is in motion. trol of the vehicle. Failure to follow this warn- stack, or manual temperature controls, you’ll ing may result in serious injury or death. find the heated steering wheel switch on the switch bank below the radio screen. Heated Steering Wheel — If Equipped STEERING WHEEL NOTE: Tilt/Telescoping Steering Column The steering wheel contains a heating element The engine must be running for the heated that helps warm your hands in cold weather. The steering wheel to operate. This feature allows you to tilt the steering col- heated steering wheel has only one temperature Vehicles Equipped With Remote Start umn upward or downward. It also allows you to setting. Once the heated steering wheel has lengthen or shorten the steering column. The been turned on, it will stay on for an average of On models that are equipped with remote start, tilt/telescoping control handle is located below 80 minutes or more before automatically shut- the heated steering wheel can be programmed the steering wheel at the end of the steering ting off. This time will vary based on environ- to come on during a remote start through the column. mental temperatures. The heated steering Uconnect system. Refer to “Uconnect Settings” To unlock the steering column, push the control wheel can shut off early or may not turn on when in “Multimedia” in the Owner’s Manual for fur- handle downward. To tilt the steering column, the steering wheel is already warm. ther information. move the steering wheel upward or downward as 25 WARNING! EXTERIOR LIGHTS

• Persons who are unable to feel pain to the Multifunction Lever skin because of advanced age, chronic The multifunction lever controls the operation illness, diabetes, spinal cord injury, medi- of the turn signals, headlight beam selection cation, alcohol use, exhaustion, or other and passing lights. The multifunction lever is physical conditions must exercise care located on the left side of the steering column. when using the steering wheel heater. It may cause burns even at low temperatures, especially if used for long periods. • Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material. This may cause the steering wheel heater to overheat. Headlight Switch Multifunction Lever 1 — Auto Headlights 2 — Rotate Headlight Switch MIRRORS 3 — Push Fog Light GETTING TO KNOW YOUR VEHICLE The headlight switch is located on the left side 4 — Rotate Dimmer Heated Mirrors — If Equipped of the instrument panel. This switch controls the operation of the headlights, parking lights, instrument panel lights, instrument panel light Rotate the headlight switch clockwise to the These mirrors are heated to melt frost or ice. dimming, interior lights and fog lights. first detent for parking lights and instrument This feature will be activated whenever you turn panel light operation. Rotate the headlight on the rear window defroster (if equipped). Re- switch to the second detent for headlight, park- fer to “Climate Controls” in this section for ing light and instrument panel light operation. further information. 26 High Beam/Low Beam Select Switch Headlights On With Wipers (Available With An indicator light in the instrument cluster illuminates when the fog lights are turned on. Pull the multifunction lever toward you to Automatic Headlights Only) switch the headlights to high beam. Pull the When this feature is active, the headlights will NOTE: lever a second time to switch the headlights turn on after the wipers are turned on if the The fog lights will operate when the low beam back to low beam. headlight switch is placed in the AUTO position headlights or parking lights are on. However, selecting the high beam headlights will turn off and programmable feature is set to ON. In Automatic Headlights the fog lights. addition, the headlights will turn off when the This system automatically turns the headlights wipers are turned off if they were turned on by Turn Signals on or off according to ambient light levels. To this feature. Move the multifunction lever up or down and turn the system on, rotate the headlight switch NOTE: the arrows on each side of the instrument clus- counterclockwise to the AUTO position. When The Headlights On with Wipers feature can be ter display flash to show proper operation of the the system is on, the headlight time delay fea- turned on or off using the Uconnect System. front and rear turn signal lights. ture is also on. This means the headlights will Refer to “Uconnect Settings” in “Multimedia” stay on for up to 90 seconds after you place the NOTE: in your Owner’s Manual for further information. ignition into the OFF position. The headlight • If either light remains on and does not flash, or time delay can be programmed 0/30/60/ Fog Lights — If Equipped there is a very fast flash rate, check for a 90 seconds. defective outside light bulb. If an indicator The front fog light switch is built into the head- fails to light when the lever is moved, it would Refer to “Uconnect Settings” in “Multimedia” light switch. suggest that the indicator bulb is defective. in your Owner’s Manual for further information. To activate the front fog lights, turn on • A “Turn Signal On” message will appear in the To turn the automatic system off, move the the parking lights or the low beam instrument cluster display and a continuous headlight switch out of the AUTO position. headlights and push the headlight chime will sound if the vehicle is driven more switch. To turn off the front fog lights, either than 1 mile (1.6 km) with either turn signal NOTE: push the headlight switch a second time or turn on. The engine must be running before the head- off the headlight switch. lights will come on in the automatic mode. 27 Lane Change Assist — If Equipped Windshield Wiper Operation CAUTION! Tap the lever up or down once, without moving Rotate the end of the lever upward, to the first wiper motor may occur when the vehicle is beyond the detent, and the turn signal (right or detent past the intermittent settings for low- restarted. left) will flash three times then automatically speed wiper operation. Rotate the end of the • Always remove any buildup of snow that turn off. lever upward to the second detent past the prevents the windshield wiper blades from intermittent settings for high-speed wiper op- returning to the off position. If the wind- WIPERS AND WASHERS eration. shield wiper control is turned off and the blades cannot return to the off position, NOTE: The windshield wiper/washer control lever is damage to the wiper motor may occur. The wipers will automatically return to the located on the left side of the steering column. “park” position if you turn OFF the ignition Intermittent Wiper System switch while they are operating. The wipers will resume operation when you turn the ignition Use the intermittent wiper system when switch back to the ON position. weather conditions make a single wiping cycle, with a variable pause between cycles, desirable. CAUTION! Rotate the end of the windshield wiper/washer control lever to one of the first five detents to • Turn the windshield wipers off when driv- select the desired delay interval.

GETTING TO KNOW YOUR VEHICLE ing through an automatic car wash. Dam- Multifunction Lever age to the windshield wipers may result if There are five delay settings, which allow you to regulate the wipe interval from a minimum of The front wipers are operated by rotating a the wiper control is left in any position one cycle every two seconds to a maximum of switch, located at the end of the lever. For other than off. • In cold weather, always turn off the wiper approximately 36 seconds between cycles at information on using the rear window wiper/ switch and allow the wipers to return to the vehicle speeds below 10 mph (16 km/h). At washer, refer to “Rear Wiper Operation” in this park position before turning off the engine. speeds greater than 10 mph (16 km/h), the section. If the wiper switch is left on and the wipers delay varies from a minimum of one cycle every freeze to the windshield, damage to the second to a maximum of approximately 18 seconds between cycles. 28 NOTE: Mist Feature If the rear wiper is operating when the ignition is The wiper delay times depend on vehicle speed. turned to the LOCK position, the wiper will Push the washer knob, located on the end of the If the vehicle is moving less than 10 mph automatically return to the “park” position. multifunction lever, inward to the first detent to (16 km/h), delay times will be doubled. When the vehicle is restarted, the wiper will activate a single wipe cycle to clear the wind- resume function at whichever position the Windshield Washers shield of road mist or spray from a passing switch is set at. vehicle. The wipers will continue to operate To use the windshield washer, push the washer until you release the lever. knob, located on the end of the multifunction CAUTION! lever, inward to the second detent. NOTE: The mist feature does not activate the washer • Turn the windshield wipers off when driv- If you activate the washer while the wiper con- ing through an automatic car wash. Dam- pump; therefore, no washer fluid will be sprayed trol is in the delay range, the wipers will operate age to the windshield wipers may result if on the windshield. The wash function must be in low-speed for two or three wipe cycles after the wiper control is left in any position used in order to spray the windshield with releasing the lever and then resume the inter- other than off. washer fluid. mittent interval previously selected. • In cold weather, always turn off the wiper Rear Window Wiper/Washer switch and allow the wipers to return to the If you activate the washer while the wiper con- park position before turning off the engine. trol is in the off position, the wipers will operate The rear window wiper/washer control is located If the wiper switch is left on and the wipers for two or three wipe cycles and then turn off. on the left side of the steering column. freeze to the windshield, damage to the wiper motor may occur when the vehicle is WARNING! Rotate the switch upward to the first detent position for rear wiper operation. restarted. • Always remove any buildup of snow that Sudden loss of visibility through the windshield Rotate the switch upward past the first could lead to a collision. You might not see other prevents the windshield wiper blades from detent position to activate the rear vehicles or other obstacles. To avoid sudden returning to the off position. If the wind- icing of the windshield during freezing weather, washer. The washer pump will continue shield wiper control is turned off and the warm the windshield with the defroster before to operate as long as the switch is held. Upon blades cannot return to the off position, and during windshield washer use. release, the wiper will cycle three times before damage to the wiper motor may occur. returning to the set position. 29 CLIMATE CONTROLS

The air conditioning and heating system is designed to make you comfortable in all types of weather. This system can be operated through either the instrument panel or through the Uconnect system display. When the Uconnect system is in different modes (Radio, Player, Settings, More, etc.) the driver and passenger temperature settings will be indicated at the top of the display. Climate Control Knobs Automatic Climate Controls Overview GETTING TO KNOW YOUR VEHICLE

Uconnect 3/3 NAV Automatic Climate Controls

30 Automatic Climate Controls Descriptions Icon Description

MAX A/C Button Press to change the current setting, the indicator illuminates when MAX A/C is on. Pressing it again turns the MAX A/C operation to switch into manual mode and the MAX A/C indicator turns off.

A/C Button Press and release to change the current setting. The indicator illuminates when A/C is on.

Recirculation Button Press and release this button on the touchscreen, or push the button on the faceplate, to change the system between recirculation mode and outside air mode. Recirculation can be used when outside conditions such as smoke, odors, dust, or high humidity are present. Recirculation can be used in all modes. The A/C can be deselected manually without disturbing the mode control selection. Continuous use of the Recirculation mode may make the inside air stuffy and window fogging may occur. Extended use of this mode is not recommended. AUTO Button Automatically controls the interior cabin temperature by adjusting airflow distribution and amount. Toggling this function will cause the system to switch between manual mode and automatic modes. Refer to “Automatic Operation” for more information. Front Defrost Button The Front Defrost button changes the current airflow setting to Defrost mode. The indicator illuminates when this feature is on. Air comes from the windshield and side window demist outlets. When the defrost button is selected, the blower level may increase. Use Defrost mode with maximum temperature settings for best windshield and side window defrosting and defogging. When toggling the front defrost mode button, the climate system will return to previous setting.

31 Icon Description

Rear Defrost Button The Rear Defrost Control button turns on the rear window defroster and the heated outside mirrors (if equipped). An indicator will illuminate when the rear window defroster is on. The rear window defroster automatically turns off after ten minutes.

Rear Climate Control Button REAR CLIMATE Press and release this button to access the rear climate controls. The indicator will illuminate when the rear climate controls are ON.

Driver And Passenger Temperature Up And Down Buttons Provides the driver and passenger with independent temperature control. Push the red button on the faceplate or touchscreen or press and slide the temperature bar towards the red arrow button on the touchscreen for warmer temperature settings. Push the blue button on the faceplate or touchscreen or press and slide the temperature bar towards the blue arrow button on the touchscreen for cooler temperature settings.

SYNC Button Press the SYNC button on the touchscreen to toggle the SYNC feature on/off. The SYNC indicator is illuminated when this fea-

GETTING TO KNOW YOUR VEHICLE ture is enabled. SYNC is used to synchronize the passenger temperature setting with the driver temperature setting. Changing the passenger’s temperature setting while in SYNC will automatically exit this feature.

32 Icon Description Faceplate Knob

Blower Control Blower Control is used to regulate the amount of air forced through the climate system. There are seven blower speeds available. The speeds can be selected using either the blower control knob on the faceplate or the buttons on the touchscreen. • Faceplate: The blower speed increases as you turn the blower control knob clockwise from the lowest blower setting. The blower Touchscreen Buttons speed decreases as you turn the blower control knob counterclockwise. • Touchscreen: Use the small blower icon to reduce the blower setting and the large blower icon to increase the blower setting. The blower can also be selected by pressing the blower bar area between the icons.

Panel Mode Panel Mode Air comes from the outlets in the instrument panel. Each of these outlets can be individually adjusted to direct the flow of air. The air vanes of the center outlets and outboard outlets can be moved up and down or side to side to regulate airflow direction. There is a shut off wheel located below the air vanes to shut off or adjust the amount of airflow from these outlets.

Bi-Level Mode Bi-Level Mode Air comes from the instrument panel outlets and floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. NOTE: Bi-Level mode is designed under comfort conditions to provide cooler air out of the panel outlets and warmer air from the floor outlets.

33 Icon Description Floor Mode Floor Mode Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets.

Mix Mode Mix Mode Air is directed through the floor, defrost, and side window demister outlets. This setting works best in cold or snowy conditions that require extra heat to the windshield. This setting is good for maintaining comfort while reducing moisture on the windshield.

Climate Control OFF Button This button turns the Climate Control System off. GETTING TO KNOW YOUR VEHICLE

34 CAUTION! CAUTION! floor outlets or cool, dehumidified air through the headliner outlets. The rear system tempera- Failure to follow these cautions can cause • Do not use scrapers, sharp instruments, ture control buttons are located in the Uconnect damage to the heating elements: or abrasive window cleaners on the inte- system, located on the instrument panel. • Use care when washing the inside of the rior surface of the window. The Three-Zone ATC system allows for adjust- rear window. Do not use abrasive window • Keep all objects a safe distance from the ment of the rear climate controls from the front cleaners on the interior surface of the window. ATC panel. To change the rear system settings: window. Use a soft cloth and a mild wash- Controlling The Rear Climate Controls From ing solution, wiping parallel to the heat- • Press the "REAR CLIMATE" button to change ing elements. Labels can be peeled off The Front ATC Panel control to rear control mode, Rear display after soaking with warm water. The rear ATC system has floor air outlets at the (below) will appear. Control functions now rear right side of the 3rd Row seats and over- operate rear system. head outlets at each outboard rear seating posi- • To return to Front screen, press the "FRONT tion. The system provides heated air through the CLIMATE" button. Icon Description Rear Auto Button Automatically controls the rear interior cabin temperature by adjusting airflow distribution and amount. Performing this function will cause the system to switch between manual mode and automatic modes. Refer to “Automatic Operation” for more information.

Rear Lock Button Press and release to lock out the rear manual temperature controls from adjusting the rear temperature and blower settings.

35 Icon Description

Front Climate Button/Done Press and release this button to change the display on the Uconnect radio back to the Front Climate Controls.

Rear Passenger Temperature Up and Down Buttons Provides the rear passengers with independent temperature control. Push the up arrow button on the touchscreen to increase the temperature. Push the down arrow button on the touchscreen to decrease the temperature. When the SYNC feature is active, the passenger’s temperature will move up and down with the driver’s temperature.

SYNC Button — If Equipped Press the SYNC button on the touchscreen to toggle the SYNC feature on/off. The SYNC indicator is illuminated when this feature is enabled. SYNC is used to synchronize the rear passenger temperature setting with the driver temperature setting. The SYNC feature also synchronizes the front passenger’s temperature to the driver temperature setting. Changing the rear passenger temperature setting while in SYNC will automatically exit this feature.

GETTING TO KNOW YOUR VEHICLE Blower Control Blower Control is used to regulate the amount of air forced through the climate system. There are seven blower speeds available. Adjusting the blower will cause automatic mode to switch to manual operation. The speeds can be selected using the buttons on the touchscreen.

Rear Passenger Climate Control OFF Button Press and release this button to turn the Rear Climate Controls off.

36 Icon Description Panel Mode Panel Mode Press this button on the touchscreen to change the air distribution mode to Panel Mode. In Panel Mode, air comes from the outlets in the instrument panel. Each of these outlets can be individually adjusted to direct the flow of air. The air vanes of the center outlets and outboard outlets can be moved up and down or side to side to regulate airflow direction. There is a shut off wheel located below the air vanes to shut off or adjust the amount of airflow from these outlets. Bi-Level Mode Bi-Level Mode Press this button on the touchscreen to change the air distribution mode to Bi-Level Mode. In Bi-Level Mode, air comes from the instrument panel outlets and floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. NOTE: Bi-Level mode is designed under comfort conditions to provide cooler air out of the panel outlets and warmer air from the floor outlets. Floor Mode Floor Mode Press this button on the touchscreen to change the air distribution mode to Floor Mode. In Floor Mode, air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets.

37 Rear Automatic Temperature Control (ATC) 1. Adjust the Rear Blower, Rear Temperature NOTE: — If Equipped and the Rear Modes to suit your comfort • It is not necessary to move the temperature needs. settings. The system automatically adjusts 2. ATC is selected by adjusting the knob to the the temperature, mode and fan speed to pro- AUTO position. vide comfort as quickly as possible. Once the desired temperature is displayed, the ATC System will automatically achieve and maintain that comfort level. When the system is set up for your comfort level, it is not necessary to change the settings. You will experience the greatest efficiency by simply allowing the system to function automatically. Rear ATC Climate Controls Features Icon Description Panel Mode Panel Mode Air comes from the outlets in the headliner. Each of these outlets can be individually adjusted to direct the flow of air. Moving the GETTING TO KNOW YOUR VEHICLE air vanes of the outlets to one side will shut off the airflow.

Bi-Level Mode Bi-Level Mode Air comes from both the headliner outlets and the floor outlets. NOTE: In many temperature positions, the Bi-Level mode is designed to provide cooler air out of the headliner outlets and warmer air from the floor outlets.

38 Icon Description Floor Mode Floor Mode Air comes from the floor outlets.

Rear Temperature Control Knob To change the temperature in the rear of the vehicle, turn the Temperature Control Knob. Turn it to the right to raise the temperature, or turn it to the left to lower the temperature. The rear temperature settings are displayed in control head. When rear controls are locked by the front system, the Rear Temperature Lock symbol on the control head is illuminated and any rear overhead adjustments are ignored.

Rear Blower Control Knob The rear blower control can be manually set to off, or any fixed blower speed by rotating the Blower Control Knob in the rear of the vehicle. This allows the rear seat occupants to control the volume of air circulated in the rear of the vehicle.

AUTO Button — If Equipped Automatically controls the interior cabin temperature by adjusting airflow distribution and amount. Performing this function will cause the system to switch between manual mode and automatic modes. Refer to “Automatic Operation” for more information.

Rear Climate Control/Blower Off To manually set the rear blower controls to off, press the Rear Climate Control/Blower Off button.

39 Climate Control Functions MAX A/C NOTE: In cold weather, use of recirculation mode may MAX A/C sets the control for maximum cooling Air Conditioning (A/C) lead to excessive window fogging. The recircu- performance. Press and release to toggle be- The Air Conditioning (A/C) button allows the lation feature may be unavailable (button on the tween MAX A/C and the prior settings. The touchscreen greyed out) if conditions exist that operator to manually activate or deactivate the button illuminates when MAX A/C is on. In MAX air conditioning system. When in A/C mode with could create fogging on the inside of the wind- A/C, the blower level and mode position can be shield. On systems with Manual Climate Con- the ATC set to a cool temperature, dehumidified adjusted to desired user settings. Pressing other trols, the Recirculation mode is not allowed in air flows through the air outlets. If Economy settings will cause the MAX A/C operation to Defrost mode to improve window clearing op- mode is desired, push the A/C button to turn off switch to the selected setting and MAX A/C to eration. Recirculation will be disabled auto- the A/C mode in the ATC display and deactivate exit. matically if this mode is selected. Attempting to the A/C system. use Recirculation while in this mode will cause Recirculation For Automatic Temperature NOTE: the LED in the control button to blink and then Control turn off. • If the system is in Mix or Defrost Mode, the When outside air contains smoke, odors, or high A/C can be turned off, but the A/C system Automatic Temperature Control (ATC) — If humidity, or if rapid cooling is desired, you may shall remain active to prevent fogging of the Equipped wish to recirculate interior air by pressing the windows. Recirculation control button. The recirculation Automatic Operation GETTING TO KNOW YOUR• VEHICLE If not operating in AUTO mode, the system indicator will illuminate when this button is 1. Push the AUTO button on the faceplate, or will not automatically sense the presence of selected. Press the button a second time to turn the AUTO button on the touchscreen on the fog, mist or ice on the windshield. Defrost off the Recirculation mode and allow outside air Automatic Temperature Control (ATC) Panel. Mode must be manually selected to clear the into the vehicle. windshield and side glass. 2. Next, adjust the temperature you would like the system to maintain by adjusting the • If fog or mist appears on the windshield or driver and passenger temperature control side glass, select Defrost Mode and adjust buttons. Once the desired temperature is blower speed if needed. displayed, the system will achieve and automatically maintain that comfort level. 40 3. When the system is set up for your comfort Operating Tips on high. This will ensure adequate system lubri- level, it is not necessary to change the set- cation to minimize the possibility of compressor tings. You will experience the greatest effi- Summer Operation damage when the system is started again. ciency by simply allowing the system to The engine cooling system must be protected Window Fogging function automatically. with a high-quality antifreeze coolant to provide Vehicle windows tend to fog on the inside in NOTE: proper corrosion protection and to protect against engine overheating. OAT coolant (con- mild, rainy, and/or humid weather. To clear the • It is not necessary to move the temperature windows, select Defrost or Mix mode and in- forming to MS.90032) is recommended. Refer settings for cold or hot vehicles. The system crease the front blower speed. Do not use the to “Fluids And Lubricants” in “Technical Speci- automatically adjusts the temperature, mode, Recirculation mode without A/C for long peri- fications” for proper coolant selection. and blower speed to provide comfort as ods, as fogging may occur. quickly as possible. Winter Operation Outside Air Intake • The temperature can be displayed in U.S. or To ensure the best possible heater and defroster Metric units by selecting the US/Metric cus- Make sure the air intake, located directly in performance, make sure the engine cooling sys- tomer programmable feature. Refer to the front of the windshield, is free of obstructions tem is functioning properly and the proper “Uconnect Settings” in “Multimedia” for fur- such as leaves. Leaves collected in the air intake amount, type, and concentration of coolant is ther information. To provide you with maxi- may reduce airflow, and if they enter the ple- used. Refer to “Dealer Service” in “Servicing mum comfort in the Automatic mode during num, they could plug the water drains. In winter And Maintenance” for proper coolant selection. cold start-ups, the blower fan will remain on months, make sure the air intake is clear of ice, Use of the air Recirculation mode during Winter low until the engine warms up. The blower will slush, and snow. increase in speed and transition into Auto months is not recommended, because it may mode. cause window fogging. A/C Air Filter Manual Operation Override Vacation/Storage The climate control system filters out dust and pollen from the air. Refer to an authorized dealer This system offers a full complement of manual Before you store your vehicle, or keep it out of for filter replacement instructions. override features. The AUTO symbol in the front service (i.e., vacation) for two weeks or more, ATC display will be turned off when the system run the air conditioning system at idle for about is being used in the manual mode. five minutes, in fresh air with the blower setting 41 POWER SUNROOF — IF EQUIPPED WARNING! Opening Sunroof Express The power sunroof switch is located between • Never leave children unattended in a ve- the sun visors on the overhead console. hicle, or with access to an unlocked ve- Push the switch rearward and release it within hicle. Never leave the key fob in or near the one-half second. The sunroof and sunshade will vehicle, or in a location accessible to chil- open automatically and stop when the full open dren. Do not leave the ignition of a vehicle position is reached. This is called “Express equipped with Keyless Enter-N-Go in the Open.” During Express Open operation, any ACC or ON/RUN mode. Occupants, par- other actuation of the sunroof switch will stop ticularly unattended children, can become the sunroof. entrapped by the power sunroof while operating the power sunroof switch. Such Manual Mode entrapment may result in serious injury or To open the sunroof, push and hold the switch death. rearward. The sunroof will move rearward and • In a collision, there is a greater risk of automatically stop at full open position. Any being thrown from a vehicle with an open release of the switch will stop the movement. sunroof. You could also be seriously in- The sunroof and sunshade will remain in a jured or killed. Always fasten your seat belt partially opened condition until the sunroof GETTING TO KNOW YOUR VEHICLE Sunroof Switch properly and make sure all passengers are switch is pushed again. also properly secured. 1 — Opening Sunroof • Do not allow small children to operate the 2 — Venting Sunroof Closing Sunroof sunroof. Never allow your fingers, other 3 — Closing Sunroof body parts, or any object, to project Express through the sunroof opening. Injury may Push the switch forward and release it within result. one-half second and the sunroof will close automatically from any position. The sunroof will

42 close fully and stop automatically. This is called Anti Pinch Protect Feature “Express Close.” During Express Close opera- This feature will detect an obstruction in the tion, any other actuation of the switch will stop opening of the sunroof during Express Close the sunroof. operation. If an obstruction in the path of the Manual Mode sunroof is detected, the sunroof will automati- To close the sunroof, push and hold the switch cally retract. Remove the obstruction if this forward. The sunroof will move forward and occurs. Next, push the switch forward and re- automatically stop at full closed position. Any lease to Express Close. release of the switch will stop the movement Venting Sunroof — Express and the sunroof will remain in a partially closed condition until the sunroof switch is pushed Push and release the Vent button within one again. half second and the sunroof will open to the vent position. This is called “Express Vent”, and it Wind Buffeting will occur regardless of sunroof position. During Hood Release Lever Location Express Vent operation, any other actuation of Wind buffeting can be described as the percep- 2. Outside of the vehicle, locate the safety latch the switch will stop the sunroof. tion of pressure on the ears or a helicopter-type lever near the center of the grille between the sound in the ears. Your vehicle may exhibit wind HOOD grille and hood opening. Push the safety buffeting with the windows down, or the sunroof latch lever to the left and raise the hood. (if equipped) in certain open or partially open positions. This is a normal occurrence and can Opening 3. Use the hood prop rod to secure the hood in the open position. Place the upper end of the be minimized. If the buffeting occurs with the Two latches must be released to open the hood. rear windows open, open the front and rear prop rod in the hole on the underside of the windows together to minimize the buffeting. If 1. Pull the hood release lever located under the hood. the buffeting occurs with the sunroof open, left side of the instrument panel. adjust the sunroof opening to minimize the buffeting or open any window. 43 Closing UNIVERSAL GARAGE DOOR • The HomeLink buttons that are located in the OPENER (HOMELINK) overhead console or sunvisor designate the WARNING! three different HomeLink channels. • To operate HomeLink, push and release any of Be sure the hood is fully latched before the programmed HomeLink buttons. These driving your vehicle. If the hood is not fully buttons will activate the devices they are pro- latched, it could open when the vehicle is in motion and block your vision. Failure to fol- grammed to with each press of the corre- low this warning could result in serious injury sponding HomeLink button. or death. • The HomeLink indicator light is located above the center button. CAUTION! Before You Begin Programming HomeLink To prevent possible damage: For efficient programming and accurate trans- • Before closing hood, make sure the hood mission of the radio-frequency signal, it is rec- prop rod is fully seated into its storage ommended that a new battery be placed in the retaining clips. hand-held transmitter of the device that is being • Do not slam the hood to close it. Use a firm programmed to the HomeLink system. Make

GETTING TO KNOW YOUR VEHICLE downward push at the center front edge of HomeLink Buttons And Indicator Light sure your hand-held transmitter is programmed the hood to ensure that both latches en- to activate the device you are trying to program gage. Never drive your vehicle unless the • HomeLink replaces up to three hand-held your HomeLink button to. hood is fully closed, with both latches transmitters that operate devices such as ga- engaged. rage door openers, motorized gates, lighting or Ensure that your vehicle is parked outside of the home security systems. The HomeLink unit is garage before you begin programming. powered by your vehicles 12 Volt battery. It is recommended that you erase all the channels of your HomeLink before you use it for the first time. 44 If you have any problems, or require assistance, Rolling Code Devices NOTE: please call toll-free 1-800-355-3515 or, on the All HomeLink buttons are programmed using To determine if your device has a rolling code, a Internet at HomeLink.com for information or this procedure. You do not need to erase all good indicator is its manufacturing date. Typi- assistance. channels when programming additional but- cally, devices manufactured after 1995 have tons. Erasing All The HomeLink Channels rolling codes. A device with a rolling code will also have a “LEARN” or “TRAIN” button lo- 1. Place the ignition switch into the ON/RUN To erase the channels, follow this procedure: cated where the antenna is attached to the position. 1. Place the ignition switch into the ON/RUN device. The button may not be immediately 2. Place the garage door opener transmitter position. visible when looking at the device. The name 1 to 3 inches (3 to 8 cm) away from the 2. Push and hold the two outside HomeLink and color of the button may vary slightly by HomeLink button you wish to program, while buttons (I and III) for up to 20 seconds, or manufacturer. keeping the HomeLink indicator light in until the HomeLink indicator light flashes. NOTE: view. NOTE: The “LEARN” or “TRAIN” button is not the 3. Push and hold the HomeLink button you Erasing all channels should only be performed button you normally use to operate the device. want to program while you push and hold the when programming HomeLink for the first time. Non-rolling Code Devices garage door opener transmitter button you Do not erase channels when programming addi- are trying to replicate. tional buttons. Most devices manufactured before 1995 will 4. Continue to hold both buttons and observe not have a rolling code. These devices will also Identifying Whether You Have A Rolling the HomeLink indicator light. The not have a “LEARN” or “TRAIN” button. Code Or Non-Rolling Code Device HomeLink indicator light will flash slowly and then rapidly. Once this happens, release Before programming a device to one of your Programming HomeLink To A Garage Door both buttons. HomeLink buttons, you must determine Opener whether the device has a rolling code or non- NOTE: To program any of the HomeLink buttons to rolling code. Make sure the garage door opener motor is activate your garage door opener motor, follow plugged in before moving on to the rolling code/ the steps below: non-rolling code final steps. 45 Rolling Code Garage Door Opener Final Steps Non-Rolling Code Garage Door Opener Final WARNING! Steps NOTE: you and others to be severely injured or You have 30 seconds in which to initiate rolling 1. Push and hold the programmed HomeLink killed. code final step 2, after completing rolling code button and observe the HomeLink indicator final step 1. light. If the HomeLink indicator light stays Programming HomeLink To A 1. At the garage door opener motor (in the on constantly, programming is complete. Miscellaneous Device garage), locate the “LEARN” or “TRAIN” 2. Push the programmed HomeLink button to Refer to “Programming HomeLink To A Garage button. This can usually be found where the confirm that the garage door opener motor Door Opener” for the procedure on how to pro- hanging antenna wire is attached to the operates. If the garage door opener motor gram HomeLink to a miscellaneous device, as it garage door opener motor. Firmly push and does not operate, repeat the steps from the follows the same procedure. Be sure to deter- release the “LEARN” or “TRAIN” button. beginning. mine if the device has a rolling code, or non- 2. Return to the vehicle and push the pro- rolling code before beginning the programming grammed HomeLink button three times WARNING! (holding the button for two seconds each process. • Your motorized door or gate will open and time). If the garage door opener motor oper- NOTE: close while you are programming the uni- ates, programming is complete. Canadian radio frequency laws require trans- versal transceiver. Do not program the 3. Push the programmed HomeLink button to mitter signals to time-out (or quit) after several GETTING TO KNOW YOUR VEHICLE transceiver if people or pets are in the path confirm that the garage door opener motor of the door or gate. seconds of transmission, which may not be long operates. If the garage door opener motor • Do not run your vehicle in a closed garage enough for HomeLink to pick up the signal does not operate, repeat the final steps for or confined area while programming the during programming. Similar to this Canadian the rolling code procedure. transceiver. Exhaust gas from your vehicle law, some U.S. gate operators are designed to contains Carbon Monoxide (CO) which is time-out in the same manner. The procedure odorless and colorless. Carbon Monoxide is may need to be preformed multiple times to poisonous when inhaled and can cause successfully pair the device to your HomeLink buttons.

46 Reprogramming A Single HomeLink Button General Information INTERNAL EQUIPMENT To reprogram a single HomeLink button that has The following regulatory statement applies to all Power Outlets been previously trained, without erasing all the Radio Frequency (RF) devices equipped in this channels, follow the procedure below. Be sure vehicle: A 12 Volt (13 Amp) power outlet is located in to determine whether the new device you want the center console below the radio. The power This device complies with Part 15 of the FCC to program the HomeLink button to has a Roll- outlet has power available when the ignition is Rules and with Industry Canada license-exempt ing Code, or Non-rolling Code. in the ON/RUN or ACC position. RSS standard(s). Operation is subject to the 1. Cycle the ignition to the ON/RUN position, following two conditions: without starting the engine. 1. This device may not cause harmful interfer- 2. Push and hold the desired HomeLink button ence, and until the HomeLink Indicator light begins to 2. This device must accept any interference flash after 20 seconds. Do not release the received, including interference that may button. cause undesired operation. 3. Without releasing the button, proceed with Step 2 in “Programming HomeLink To A NOTE: Garage Door Opener” and follow all remain- Changes or modifications not expressly ap- ing steps. proved by the party responsible for compliance could void the user’s authority to operate the equipment.

Front Power Outlet

47 This power outlet will also operate a conven- NOTE: tional cigar lighter unit. To preserve the heating To ensure proper operation a Mopar knob and element, do not hold the lighter in the heating element must be used. position. CAUTION! A second 12 Volt (13 Amp) power outlet is located inside the center console storage area. • Do not exceed the maximum power of Power is available with the ignition is in the 160 Watts (13 Amps) at 12 Volts. If the ON/RUN, ACC or LOCK position. 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will Rear Seat 12 Volt Power Outlet need to be replaced. • The power outlet on the bottom of the A fourth fused 12 Volt power outlet is located on center console shares the fuse with the the left quarter trim panel in the cargo area. This power outlet on the back of the console. power outlet has power available when the igni- The combined usage must not exceed tion is in the ON or ACC position. 160 Watts (13 Amps) at 12 Volts. • Power outlets are designed for accessory plugs only. Do not insert any other object in the power outlets as this will damage the GETTING TO KNOW YOUR VEHICLE Center Console 12 Volt Power Outlet outlet and blow the fuse. Improper use of the power outlet can cause damage not A third fused 12 Volt power outlet is located on covered by your New Vehicle Limited War- the back of the center console. This power ranty. outlet has power available when the ignition is in the LOCK, ON or ACC position.

Rear Cargo Area Power Outlet

48 Power Outlet Fuses 1 — F103 20 Amp Yellow — Power Outlet Console Bin And Power Outlet Console Rear 2 — F102 20 Amp Yellow — Cigar Lighter Instrument Panel And Power Outlet Left Rear Cargo Area

49 WARNING! CAUTION!

To avoid serious injury or death: • After the use of high power draw accesso- • Only devices designed for use in this type ries, or long periods of the vehicle not of outlet should be inserted into any being started (with accessories still 12 Volt outlet. plugged in), the vehicle must be driven a • Do not touch with wet hands. sufficient length of time to allow the alter- • Close the lid when not in use and while nator to recharge the vehicle's battery. driving the vehicle. • Power outlets are designed for accessory • If this outlet is mishandled, it may cause plugs only. Do not hang any type of acces- an electric shock and failure. sory or accessory bracket from the plug. Power Inverter — If Equipped CAUTION! Your vehicle may be equipped with a 115 or • Many accessories that can be plugged in 230 Volt AC (150 Watt maximum) power outlet Power Inverter draw power from the vehicle's battery, even located on the back of the center console. This The power inverter is designed with built-in when not in use (i.e., cellular phones, outlet can power mobile phones, electronics overload protection. If the power rating of etc.). Eventually, if plugged in long and other low power devices requiring power up GETTING TO KNOW YOUR VEHICLE 150 Watts is exceeded, the power inverter will enough, the vehicle's battery will discharge to 150 Watts. Certain high-end video game automatically shut down. Once the electrical sufficiently to degrade battery life and/or consoles will exceed this power limit, as will prevent the engine from starting. device has been removed from the outlet the most power tools. • Accessories that draw higher power (i.e., inverter should automatically reset. If the power coolers, vacuum cleaners, lights, etc.) will rating exceeds approximately 170 Watts, the degrade the battery even more quickly. power inverter may have to be reset manually. To Only use these intermittently and with reset the inverter manually press the power greater caution.

50 inverter button OFF and ON. To avoid overload- WARNING! 2. Press the “Outlet” button on the touching the circuit, check the power ratings on screen (located on the Uconnect display) to electrical devices prior to using the inverter. • Close the lid when not in use. turn the power inverter On or Off. • If this outlet is mishandled, it may cause NOTE: an electric shock and failure. Vehicles Equipped With Uconnect 3/3 NAV Due to built-in overload protection, the power To turn the power inverter on or off perform the outlet will shut down if the 115 Volt AC (150 Power Inverter Operation following: Watt maximum) power rating is exceeded. The power inverter is turned On and Off using 1. Press the “Controls” button on the WARNING! the Uconnect System. touchscreen. Vehicles Equipped With Radio 4.3 To avoid serious injury or death: 2. Press the “Outlet” button on the touch- • Do not use a three-prong adaptor. To turn the power inverter on or off perform the screen to turn the power inverter On or Off. • Do not insert any objects into the recep- following: tacles. 1. Press the “More” button on the faceplate • Do not touch with wet hands. (located next to the Uconnect display).

51 52 GETTING TO KNOW YOUR INSTRUMENT PANEL

GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DISPLAY ...... 54 Yellow Warning Lights ...... 58 ONBOARD DIAGNOSTIC SYSTEM — OBD II . . .62 Instrument Cluster Display Location And Green Indicator Lights ...... 61 Onboard Diagnostic System (OBD II) Controls ...... 54 White Indicator Lights ...... 61 Cybersecurity ...... 62 WARNING LIGHTS AND MESSAGES ...... 55 Blue Indicator Lights...... 62 Red Warning Lights ...... 55

53 INSTRUMENT CLUSTER DISPLAY Instrument Cluster Display Location And The system allows the driver to select informa- Controls tion by pushing the following buttons mounted Your vehicle may be equipped with an instru- on the steering wheel: ment cluster display, which offers useful infor- The instrument cluster display features a driver- mation to the driver. With the ignition in the interactive display that is located in the instru- STOP/OFF mode, opening/closing of a door will ment cluster. activate the display for viewing, and display the This system allows the driver to select a variety total miles, or kilometers, in the odometer. Your of useful information by pushing the switches instrument cluster display is designed to display mounted on the steering wheel. The menu important information about your vehicle’s sys- items consist of the following: tems and features. Using a driver interactive display located on the instrument panel, your • Radio Info instrument cluster display can show you how • Fuel Economy systems are working and give you warnings • Vehicle Speed when they are not. The steering wheel mounted controls allow you to scroll through the main • Trip Info menus and submenus. You can access the spe- • Tire Pressure cific information you want and make selections • Vehicle Information Instrument Cluster Display Controls and adjustments. • Messages • Turn Menu OFF GETTING TO KNOW YOUR INSTRUMENT PANEL

54 • Up Arrow Button cautionary and as such must not be considered — Air Bag Warning Light as exhaustive and/or alternative to the informa- Push and release the up arrow button to scroll This light indicates a fault with the air bag, and tion contained in the Owner’s Manual, which upward through the main menus and sub- will turn on for four to eight seconds as a bulb you are advised to read carefully in all cases. menus. check when the ignition is placed in the ON/ Always refer to the information in this chapter in • Down Arrow Button RUN or ACC/ON/RUN position. This light will the event of a failure indication. All active tell- illuminate with a single chime when a fault with Push and release the down arrow button to tales will display first if applicable. The system the air bag has been detected, it will stay on scroll downward through the main menus and check menu may appear different based upon until the fault is cleared. If the light is either not submenus. equipment options and current vehicle status. on during startup, stays on, or turns on while Some telltales are optional and may not appear. • Right Arrow Button driving, have the system inspected at an autho- Push and release the right arrow button for Red Warning Lights rized dealer as soon as possible. access to main menus or submenus. Push and — Brake Warning Light hold the right arrow button for two seconds to — Seat Belt Reminder Warning Light reset features. This light indicates when the driver or passenger This light monitors various brake functions, in- • BACK Button seat belt is unbuckled. When the ignition is first cluding brake fluid level and parking brake ap- placed in the ON/RUN or ACC/ON/RUN position plication. If the brake light turns on it may Push and release the BACK button to scroll back and if the driver’s seat belt is unbuckled, a indicate that the parking brake is applied, that to a previous menu. chime will sound and the light will turn on. the brake fluid level is low, or that there is a WARNING LIGHTS AND MESSAGES When driving, if the driver or front passenger problem with the anti-lock brake system reser- seat belt remains unbuckled, the Seat Belt voir. The warning/indicator lights will illuminate in Reminder Light will flash or remain on continu- the instrument panel together with a dedicated ously and a chime will sound. Refer to “Occu- message and/or acoustic signal when appli- pant Restraints Systems” in “Safety” for further cable. These indications are indicative and pre- information.

55 If the light remains on when the parking brake NOTE: parking brake is applied or a brake fault is has been disengaged, and the fluid level is at The light may flash momentarily during sharp detected. If the light does not illuminate, have the full mark on the master cylinder reservoir, it cornering maneuvers, which change fluid level the light inspected by your authorized dealer. indicates a possible brake hydraulic system conditions. The vehicle should have service per- The light also will turn on when the parking malfunction or that a problem with the Brake formed, and the brake fluid level checked. brake is applied with the ignition switch in the Booster has been detected by the Anti-Lock If brake failure is indicated, immediate repair is ON/RUN position. Brake System (ABS) / Electronic Stability Con- necessary. trol (ESC) system. In this case, the light will NOTE: remain on until the condition has been cor- WARNING! This light shows only that the parking brake is rected. If the problem is related to the brake applied. It does not show the degree of brake booster, the ABS pump will run when applying Driving a vehicle with the red brake light on is application. the brake, and a brake pedal pulsation may be dangerous. Part of the brake system may — Vehicle Security Warning Light — If felt during each stop. have failed. It will take longer to stop the vehicle. You could have a collision. Have the Equipped The dual brake system provides a reserve brak- vehicle checked immediately. ing capacity in the event of a failure to a portion This light will flash at a fast rate for approximately 15 seconds when the vehicle security of the hydraulic system. A leak in either half of Vehicles equipped with the Anti-Lock Brake alarm is arming, and then will flash slowly until the dual brake system is indicated by the Brake System (ABS) are also equipped with Electronic the vehicle is disarmed. Warning Light, which will turn on when the Brake Force Distribution (EBD). In the event of brake fluid level in the master cylinder has an EBD failure, the Brake Warning Light will — Engine Coolant Temperature Warn- dropped below a specified level. turn on along with the ABS Light. Immediate ing Light repair to the ABS system is required. The light will remain on until the cause is This light warns of an overheated engine condi- corrected. Operation of the Brake Warning Light can be tion. If the engine coolant temperature is too checked by turning the ignition switch from the high, this indicator will illuminate and a single GETTING TO KNOW YOUR INSTRUMENT PANEL OFF position to the ON/RUN position. The light chime will sound. If the temperature reaches should illuminate for approximately two seconds. The light should then turn off unless the 56 the upper limit, a continuous chime will be — Oil Pressure Warning Light sound for four minutes or until the engine is WARNING! This light indicates low engine oil pressure. If able to cool: whichever comes first. If you continue operating the vehicle when the light turns on while driving, stop the vehicle the Transmission Temperature Warning Light If the light turns on while driving, safely pull and shut off the engine as soon as possible. A is illuminated you could cause the fluid to over and stop the vehicle. If the A/C system is chime will sound when this light turns on. on, turn it off. Also, shift the transmission into boil over, come in contact with hot engine or NEUTRAL and idle the vehicle. If the tempera- exhaust components and cause a fire. Do not operate the vehicle until the cause is ture reading does not return to normal, turn the corrected. This light does not indicate how engine off immediately and call for service. CAUTION! much oil is in the engine. The engine oil level Refer to “If Your Engine Overheats” in “In Case must be checked under the hood. Of Emergency” for further information. Continuous driving with the Transmission Temperature Warning Light illuminated will — Electronic Throttle Control (ETC) — Transmission Temperature Warning eventually cause severe transmission dam- Warning Light Light — If Equipped age or transmission failure. This light informs you of a problem with the This light indicates high transmission fluid tem- Electronic Throttle Control (ETC) system. If a perature. This may occur with strenuous usage — Battery Charge Warning Light problem is detected while the vehicle is run- such as trailer towing. If this light turns on, stop ning, the light will either stay on or flash de- the vehicle and run the engine at idle or slightly This light illuminates when the battery is not pending on the nature of the problem. Cycle the faster, with the transmission in PARK or NEU- charging properly. If it stays on while the engine ignition when the vehicle is safely and com- TRAL, until the light turns off. Once the light is running, there may be a malfunction with the pletely stopped and the transmission is placed charging system. Contact your authorized dealer turns off, you may continue to drive normally. in the PARK position. The light should turn off. as soon as possible. If the light remains on with the vehicle running, This indicates a possible problem with the elec- your vehicle will usually be drivable; however, trical system or a related component. see an authorized dealer for service as soon as possible.

57 NOTE: Yellow Warning Lights This light may turn on if the accelerator and WARNING! — Engine Check/Malfunction Indica- brake pedals are pressed at the same time. Continued operation with reduced assist tor Warning Light (MIL) If the light continues to flash when the vehicle is could pose a safety risk to yourself and oth- running, immediate service is required and you ers. Service should be obtained as soon as The Engine Check/Malfunction Indicator Light may experience reduced performance, an possible. (MIL) is a part of an Onboard Diagnostic System elevated/rough idle, or engine stall and your called OBD II that monitors engine and auto- vehicle may require towing. The light will come matic transmission control systems. The light — Door Open Warning Light — If on when the ignition is placed in the ON/RUN or will illuminate when the ignition is in the ON/ Equipped ACC/ON/RUN position and remain on briefly as RUN position before engine start. If the bulb a bulb check. If the light does not come on This indicator will illuminate when a door is does not come on when turning the ignition during starting, have the system checked by an ajar/open and not fully closed. switch from OFF to ON/RUN, have the condition authorized dealer. NOTE: checked promptly. — Electric Power Steering Fault If the vehicle is moving, there will also be a Certain conditions, such as a loose or missing Warning Light single chime. gas cap, poor quality fuel, etc., may illuminate This light will turn on when there's a fault with — Liftgate Open Warning Light the light after engine start. The vehicle should the EPS (Electric Power Steering) system. Refer be serviced if the light stays on through several to “Power Steering” in “Starting And Operat- This indicator will turn when the liftgate is open. typical driving styles. In most situations, the ing” in the Owner’s Manual for further informa- NOTE: vehicle will drive normally and will not require tion. If the vehicle is moving, there will also be a towing. single chime. When the engine is running, the MIL may flash to alert serious conditions that could lead to immediate loss of power or severe catalytic GETTING TO KNOW YOUR INSTRUMENT PANEL converter damage. The vehicle should be serviced as soon as possible if this occurs. 58 WARNING! on when the ignition is placed in the ON/RUN or Each time the ignition is turned to ON/RUN or ACC/ON/RUN position, and when ESC is acti- ACC/ON/RUN, the ESC system will be on, even A malfunctioning catalytic converter, as ref- vated. It should go out with the engine running. if it was turned off previously. erenced above, can reach higher tempera- If the “ESC Indicator Light” comes on continu- — Tire Pressure Monitoring System tures than in normal operating conditions. ously with the engine running, a malfunction (TPMS) Warning Light This can cause a fire if you drive slowly or has been detected in the ESC system. If this park over flammable substances such as dry light remains on after several ignition cycles, The warning light switches on and a message is plants, wood, cardboard, etc. This could re- and the vehicle has been driven several miles displayed to indicate that the tire pressure is sult in death or serious injury to the driver, (kilometers) at speeds greater than 30 mph lower than the recommended value and/or that occupants or others. (48 km/h), see your authorized dealer as soon as slow pressure loss is occurring. In these cases, possible to have the problem diagnosed and optimal tire duration and fuel consumption may CAUTION! corrected. not be guaranteed. Prolonged driving with the Malfunction Indi- • The “ESC Off Indicator Light” and the “ESC Should one or more tires be in the condition cator Light (MIL) on could cause damage to Indicator Light” come on momentarily each mentioned above, the display will show the the vehicle control system. It also could af- time the ignition is placed in the ON/RUN or indications corresponding to each tire in fect fuel economy and driveability. If the MIL ACC/ON/RUN position. sequence. is flashing, severe catalytic converter dam- • The ESC system will make buzzing or clicking age and power loss will soon occur. Immedi- sounds when it is active. This is normal; the CAUTION! ate service is required. sounds will stop when ESC becomes inactive. Do not continue driving with one or more flat • This light will come on when the vehicle is in tires as handling may be compromised. Stop — Electronic Stability Control (ESC) an ESC event. the vehicle, avoiding sharp braking and steer- Active Warning Light — If Equipped — Electronic Stability Control (ESC) Off ing. If a tire puncture occurs, repair immedi- Warning Light — If Equipped ately using the dedicated tire repair kit and This light will indicate when the Electronic Sta- contact your authorized dealer as soon as bility Control system is Active. The “ESC Indi- This light indicates the Electronic Stability Con- possible. cator Light” in the instrument cluster will come trol (ESC) is off. 59 Each tire, including the spare (if provided), Please note that the TPMS is not a substitute for telltale after replacing one or more tires or should be checked monthly when cold and proper tire maintenance, and it is the driver’s wheels on your vehicle to ensure that the re- inflated to the inflation pressure recommended responsibility to maintain correct tire pressure, placement or alternate tires and wheels allow by the vehicle manufacturer on the vehicle plac- even if under-inflation has not reached the level the TPMS to continue to function properly. ard or tire inflation pressure label. (If your ve- to trigger illumination of the TPMS low tire hicle has tires of a different size than the size pressure telltale. CAUTION! indicated on the vehicle placard or tire inflation Your vehicle has also been equipped with a The TPMS has been optimized for the origi- pressure label, you should determine the proper TPMS malfunction indicator to indicate when nal equipment tires and wheels. TPMS pres- tire inflation pressure for those tires.) the system is not operating properly. The TPMS sures and warning have been established for malfunction indicator is combined with the low As an added safety feature, your vehicle has the tire size equipped on your vehicle. Unde- tire pressure telltale. When the system detects a been equipped with a tire pressure monitoring sirable system operation or sensor damage malfunction, the telltale will flash for approxi- system (TPMS) that illuminates a low tire pres- may result when using replacement equip- mately one minute and then remain continu- sure telltale when one or more of your tires is ment that is not of the same size, type, ously illuminated. This sequence will continue significantly under-inflated. Accordingly, when and/or style. Aftermarket wheels can cause upon subsequent vehicle start-ups as long as sensor damage. Using aftermarket tire seal- the low tire pressure telltale illuminates, you the malfunction exists. When the malfunction ants may cause the Tire Pressure Monitoring should stop and check your tires as soon as indicator is illuminated, the system may not be System (TPMS) sensor to become inoper- possible, and inflate them to the proper pres- able to detect or signal low tire pressure as able. After using an aftermarket tire sealant it sure. Driving on a significantly under-inflated intended. TPMS malfunctions may occur for a is recommended that you take your vehicle to tire causes the tire to overheat and can lead to variety of reasons, including the installation of your authorized dealer to have your sensor tire failure. Under-inflation also reduces fuel replacement or alternate tires or wheels on the function checked. efficiency and tire tread life, and may affect the vehicle that prevent the TPMS from functioning vehicle’s handling and stopping ability. properly. Always check the TPMS malfunction GETTING TO KNOW YOUR INSTRUMENT PANEL

60 — Anti-Lock Brake (ABS) Warning — Low Washer Fluid Warning Light — NOTE: Light If Equipped • A continuous chime will sound if the vehicle is This light monitors the Anti-Lock Brake System This indicator will illuminate when the wind- driven more than 1 mile (1.6 km) with either (ABS). The light will turn on when the ignition is shield washer fluid is low. turn signal on. placed in the ON/RUN or ACC/ON/RUN position • Check for an inoperative outside light bulb if and may stay on for as long as four seconds. Green Indicator Lights either indicator flashes at a rapid rate. If the ABS light remains on or turns on while — Park/Headlight On Indicator Light — Cruise Control Set Indicator Light driving, then the Anti-Lock portion of the brake This indicator will illuminate when the park — If Equipped system is not functioning and service is required lights or headlights are turned on. This light will turn on when the speed control is as soon as possible. However, the conventional set to the desired speed. Refer to “Speed Con- — Front Fog Indicator Light — If brake system will continue to operate normally, trol” in “Starting And Operating” for further assuming the Brake Warning Light is not also Equipped information. on. This indicator will illuminate when the front fog White Indicator Lights If the ABS light does not turn on when the lights are on. ignition is placed in the ON/RUN or ACC/ON/ — Cruise Control Ready Indicator — Turn Signal Indicator Lights RUN position, have the brake system inspected This light will turn on when the speed control is by an authorized dealer. When the left or right turn signal is activated, ready, but not set. the turn signal indicator will flash indepen- — Low Fuel Warning Light dently and the corresponding exterior turn sig- When the fuel level reaches approximately 2 gal nal lamps will flash. Turn signals can be acti- (7.5 L), this light will turn on and a chime will vated when the multifunction lever is moved sound. The light will remain on until fuel is down (left) or up (right). added.

61 Blue Indicator Lights If any of these systems require service, the OBD performance of your emissions controls. Autho- II system will turn on the Malfunction Indicator rized service technicians may need to access — High Beam Indicator Light Light (MIL). It will also store diagnostic codes this information to assist with the diagnosis and This indicator shows that the high beam head- and other information to assist your service service of your vehicle and emissions system. lights are on. With the low beams activated, technician in making repairs. Although your vehicle will usually be drivable and not need push the multifunction lever forward (toward WARNING! towing, see your authorized dealer for service as the front of the vehicle) to turn on the high soon as possible. • ONLY an authorized service technician beams. Pull the multifunction lever rearward should connect equipment to the OBD II (toward the rear of the vehicle) to turn off the CAUTION! connection port in order to diagnose or high beams. If the high beams are off, pull the service your vehicle. lever toward you for a temporary high beam on, • Prolonged driving with the MIL on could • If unauthorized equipment is connected to "flash to pass" scenario. cause further damage to the emission con- the OBD II connection port, such as a trol system. It could also affect fuel driver-behavior tracking device, it may: economy and driveability. The vehicle • Be possible that vehicle systems, in- ONBOARD DIAGNOSTIC SYSTEM — must be serviced before any emissions cluding safety related systems, could tests can be performed. be impaired or a loss of vehicle control OBD II • If the MIL is flashing while the vehicle is could occur that may result in an running, severe catalytic converter dam- accident involving serious injury or Your vehicle is equipped with a sophisticated age and power loss will soon occur. Imme- death. Onboard Diagnostic system called OBD II. This diate service is required. • Access, or allow others to access, in- system monitors the performance of the emis- formation stored in your vehicle sys- sions, engine, and transmission control sys- Onboard Diagnostic System (OBD II) tems, including personal information. tems. When these systems are operating prop- Cybersecurity erly, your vehicle will provide excellent For further information, refer to “Cybersecurity”

GETTING TO KNOW YOURperformance INSTRUMENT PANEL and fuel economy, as well as en- Your vehicle is required to have an Onboard in “Multimedia”. gine emissions well within current government Diagnostic system (OBD II) and a connection regulations. port to allow access to information related to the 62 SAFETY

SAFETY AUXILIARY DRIVING SYSTEMS ...... 64 Supplemental Restraint Systems (SRS) . . .78 Exhaust Gas ...... 103 Tire Pressure Monitoring System (TPMS) . .64 Child Restraints...... 87 Safety Checks You Should Make Inside The Vehicle ...... 104 OCCUPANT RESTRAINT SYSTEMS ...... 68 Transporting Pets ...... 103 Periodic Safety Checks You Should Make SAFETY TIPS ...... 103 Occupant Restraint Systems Features ....68 Outside The Vehicle ...... 106 Important Safety Precautions ...... 68 Transporting Passengers ...... 103 Seat Belt Systems ...... 69

63 AUXILIARY DRIVING SYSTEMS The TPMS will warn the driver of a low tire must increase the tire pressure to the recom- pressure if the tire pressure falls below the mended cold placard pressure in order for the Tire Pressure Monitoring System (TPMS) low-pressure warning limit for any reason, in- “Tire Pressure Monitoring Telltale Light” to turn cluding low temperature effects and natural off. SAFETY The Tire Pressure Monitor System (TPMS) will pressure loss through the tire. warn the driver of a low tire pressure based on NOTE: the vehicle recommended cold placard pres- When filling warm tires, the tire pressure may sure. need to be increased up to an additional 4 psi (30 kPa) above the recommended cold placard The tire pressure will vary with temperature by pressure in order to turn the Tire Pressure Moni- about 1 psi (7 kPa) for every 12°F (6.5°C). This toring Telltale Light off. means that when the outside temperature decreases, the tire pressure will decrease. Tire The system will automatically update and the pressure should always be set based on cold “Tire Pressure Monitoring Telltale Light” will inflation tire pressure. This is defined as the tire turn off once the system receives the updated pressure after the vehicle has not been driven tire pressures. The vehicle may need to be for at least three hours, or driven less than driven for up to 20 minutes above 15 mph 1 mile (1.6 km) after a three hour period. The (24 km/h) in order for the TPMS to receive this information. cold tire inflation pressure must not exceed the maximum inflation pressure molded into the For example, your vehicle may have a recom- tire sidewall. Refer to “Tires” in “Servicing And Tire Pressure Monitor Display mended cold (parked for more than three hours) placard pressure of 33 psi (227 kPa). If the Maintenance” for information on how to prop- The TPMS will continue to warn the driver of low ambient temperature is 68°F (20°C) and the erly inflate the vehicle’s tires. The tire pressure tire pressure as long as the condition exists, and measured tire pressure is 28 psi (193 kPa), a will also increase as the vehicle is driven. This is will not turn off until the tire pressure is at or temperature drop to 20°F (-7°C) will decrease normal and there should be no adjustment for above the recommended cold placard pressure. this increased pressure. the tire pressure to approximately 24 psi Once the low tire pressure warning (Tire Pres- (165 kPa). This tire pressure is low enough to sure Monitoring Telltale Light) illuminates, you turn ON the “Tire Pressure Monitoring Telltale 64 Light”. Driving the vehicle may cause the tire CAUTION! • The TPMS is not a substitute for proper tire pressure to rise to approximately 28 psi maintenance, and it is the driver’s responsibil- (193 kPa), but the “Tire Pressure Monitoring • Using aftermarket tire sealants may cause ity to maintain correct tire pressure using an Telltale Light” will still be on. In this situation, the Tire Pressure Monitoring System accurate tire pressure gauge, even if under- the “Tire Pressure Monitoring Telltale Light” will (TPMS) sensor to become inoperable. Af- inflation has not reached the level to trigger turn off only after the tires are inflated to the ter using an aftermarket tire sealant it is illumination of the “Tire Pressure Monitoring recommended that you take your vehicle to vehicle’s recommended cold placard pressure Telltale Light”. an authorized dealership to have your sen- value. sor function checked. • Seasonal temperature changes will affect tire • After inspecting or adjusting the tire pres- pressure, and the TPMS will monitor the ac- CAUTION! sure, always reinstall the valve stem cap. tual tire pressure in the tire. • The TPMS has been optimized for the This will prevent moisture and dirt from Premium System original equipment tires and wheels. entering the valve stem, which could dam- The Tire Pressure Monitor System (TPMS) uses TPMS pressures and warnings have been age the TPM sensor. established for the tire size equipped on wireless technology with wheel rim mounted NOTE: your vehicle. Undesirable system opera- electronic sensors to monitor tire pressure lev- tion or sensor damage may result when • The TPMS is not intended to replace normal els. Sensors, mounted to each wheel as part of using replacement equipment that is not tire care and maintenance, or to provide warn- the valve stem, transmit tire pressure readings of the same size, type, and/or style. The ing of a tire failure or condition. to the receiver module. TPM sensor is not designed for use on • The TPMS should not be used as a tire pres- NOTE: aftermarket wheels and may contribute to sure gauge while adjusting your tire pressure. It is particularly important for you to check the a poor overall system performance or sen- • Driving on a significantly under-inflated tire tire pressure in all of the tires on your vehicle sor damage. Customers are encouraged to causes the tire to overheat and can lead to tire monthly and to maintain the proper pressure. use OEM wheels to assure proper TPM failure. Under-inflation also reduces fuel effi- feature operation. ciency and tire tread life, and may affect the vehicle’s handling and stopping ability.

65 The TPMS consists of the following compo- NOTE: nents: When filling warm tires, the tire pressure may • Receiver module need to be increased up to an additional 4 psi (30 kPa) above the recommended cold placard SAFETY • Four tire pressure monitoring sensors pressure in order to turn the Tire Pressure Moni- • Various tire pressure monitoring system mes- toring Telltale Light off. The vehicle may need to sages, which display in the instrument cluster be driven for up to 20 minutes above 15 mph • Tire pressure monitoring telltale light (24 km/h) in order for the TPMS to receive this information. Tire Pressure Monitoring Low Pressure Service TPMS Warning Warnings When a system fault is detected, the “Tire Pres- The “Tire Pressure Monitoring Telltale sure Monitoring Telltale Light” will flash on and Light” will illuminate in the instrument off for 75 seconds and then remain on solid. Tire Pressure Monitor Display cluster and a chime will sound when The system fault will also sound a chime. In tire pressure is low in one or more of the four Should this occur, you should stop as soon as addition, the instrument cluster will display a active road tires. In addition, the instrument possible and inflate the tires with low pressure "SERVICE TPM SYSTEM" message for a mini- cluster will display a graphic of each tire with (those in a different color in the instrument mum of five seconds and then display dashes (- the low tire pressure values in a different color, cluster display graphic) to the vehicle’s recom- -) in place of the pressure value to indicate an "Inflate to XX" message will also be dis- mended cold placard pressure value as shown which sensor is not being received. played. in the "Inflate to XX"" message. Once the system If the ignition switch is cycled, this sequence receives the updated tire pressures, the system will repeat, providing the system fault still ex- will automatically update and the graphic dis- ists. If the system fault no longer exists, the play in the instrument cluster will change color “Tire Pressure Monitoring Telltale Light” will no back to the original color, and the “Tire Pressure longer flash, and the "SERVICE TPM SYSTEM" Monitoring Telltale Light” will turn off. 66 message will no longer display, and a pressure chime will sound. In addition, the graphic in long as no tire pressure is below the low- value will display in place of the dashes. A the instrument cluster will still display a pres- pressure warning limit in any of the four active system fault can occur due to any of the follow- sure value in a different color and an "Inflate road tires. The vehicle may need to be driven ing: to XX" message. for up to 20 minutes above 15 mph (24 km/h) in order for the TPMS to receive this • Jamming due to electronic devices or driving • After driving the vehicle for up to 20 minutes information. next to facilities emitting the same radio fre- above 15 mph (24 km/h), the “Tire Pressure quencies as the TPMS sensors. Monitoring Telltale Light” will flash on and off TPMS Deactivation — If Equipped for 75 seconds and then remain on solid. In • Installing some form of aftermarket window The TPMS can be deactivated if replacing all addition, the instrument cluster will display a tinting that affects radio wave signals. four wheel and tire assemblies (road tires) with "SERVICE TPM SYSTEM" message for a mini- wheel and tire assemblies that do not have • Lots of snow or ice around the wheels or wheel mum of five seconds and then display dashes TPMS Sensors, such as when installing winter housings. (- -) in place of the pressure value. wheel and tire assemblies on your vehicle. • Using tire chains on the vehicle. • For each subsequent ignition switch cycle, a To deactivate the TPMS, first replace all four chime will sound, the “Tire Pressure Monitor- • Using wheels/tires not equipped with TPMS ing Telltale Light” will flash on and off for wheel and tire assemblies (road tires) with tires sensors. 75 seconds and then remain on solid, and the not equipped with Tire Pressure Monitoring (TPM) Sensors. Then, drive the vehicle for NOTE: instrument cluster will display a "SERVICE TPM SYSTEM" message for a minimum of five 20 minutes above 15 mph (24 km/h). The • The compact spare tire does not have a tire seconds and then display dashes (- -) in place TPMS will chime, the "TPM Telltale Light" will pressure monitoring sensor. Therefore, the of the pressure value. flash on and off for 75 seconds and then remain TPMS will not monitor the pressure in the on. The instrument cluster will display the “Ser- • Once you repair or replace the original road compact spare tire. vice Tire Pressure System” message and then tire and reinstall it on the vehicle in place of display dashes (--) in place of the pressure • If you install the compact spare tire in place of the compact spare, the TPMS will update values. a road tire that has a pressure below the automatically. In addition, the “Tire Pressure low-pressure warning limit, upon the next ig- Monitoring Telltale Light” will turn off and the nition switch cycle, the “Tire Pressure Moni- graphic in the instrument cluster will display a toring Telltale Light” will remain on and a new pressure value instead of dashes (- -), as 67 Beginning with the next ignition cycle, the General Information OCCUPANT RESTRAINT SYSTEMS TPMS will no longer chime or display the “Ser- The following regulatory statement applies to all vice Tire Pressure System” message in the in- Some of the most important safety features in radio frequency (RF) devices equipped in this strument cluster but dashes (--) will remain in your vehicle are the restraint systems:

SAFETY vehicle: place of the pressure values. Occupant Restraint Systems Features This device complies with Part 15 of the FCC To reactivate the TPMS, replace all four wheel Rules and with Industry Canada license-exempt • Seat Belt Systems and tire assemblies (road tires) with tires RSS standard(s). Operation is subject to the equipped with TPM sensors. Then, drive the • Supplemental Restraint Systems (SRS) Air following two conditions: vehicle for up to 20 minutes above 15 mph Bags (24 km/h). The TPMS will chime, the "TPM (1) This device may not cause harmful interfer- • Supplemental Active Head Restraints Telltale Light" will flash on and off for 75 sec- ence, and • Child Restraints onds and then turn off. The instrument cluster (2) This device must accept any interference will display the “Service Tire Pressure System” Some of the safety features described in this received, including interference that may cause message and then display pressure values in section may be standard equipment on some undesired operation. place of the dashes. On the next ignition cycle models, or may be optional equipment on oth- the "Service Tire Pressure System" message will NOTE: ers. If you are not sure, ask your authorized no longer be displayed as long as no system Changes or modifications not expressly ap- dealer. fault exists. proved by the party responsible for compliance could void the user’s authority to operate the Important Safety Precautions equipment. Please pay close attention to the information in this section. It tells you how to use your restraint system properly, to keep you and your passengers as safe as possible.

68 Here are some simple steps you can take to 6. All occupants should always wear their lap WARNING! minimize the risk of harm from a deploying air and shoulder belts properly. bag: • Only use a rear-facing child restraint in a 7. The driver and front passenger seats should vehicle with a rear seat. 1. Children 12 years old and under should be moved back as far as practical to allow always ride buckled up in a vehicle with a the front air bags room to inflate. Seat Belt Systems rear seat. 8. Do not lean against the door or window. If Buckle up even though you are an excellent 2. If a child from 2 to 12 years old (not in a your vehicle has side air bags, and deploy- rear-facing child restraint) must ride in the driver, even on short trips. Someone on the road ment occurs, the side air bags will inflate may be a poor driver and could cause a collision front passenger seat, move the seat as far forcefully into the space between occupants back as possible and use the proper child that includes you. This can happen far away and the door and occupants could be restraint (refer to “Child Restraints” in this from home or on your own street. injured. section for further information). Research has shown that seat belts save lives, 9. If the air bag system in this vehicle needs to 3. Children that are not big enough to wear the and they can reduce the seriousness of injuries be modified to accommodate a disabled per- vehicle seat belt properly (refer to “Child in a collision. Some of the worst injuries happen Restraints” in this section for further infor- son, refer to the “Customer Assistance” sec- when people are thrown from the vehicle. Seat mation) should be secured in a vehicle with a tion for customer service contact belts reduce the possibility of ejection and the rear seat in child restraints or belt- information. risk of injury caused by striking the inside of the positioning booster seats. Older children vehicle. Everyone in a motor vehicle should be who do not use child restraints or belt- WARNING! belted at all times. positioning booster seats should ride prop- • Never place a rear-facing child restraint in erly buckled up in a vehicle with a rear seat. front of an air bag. A deploying passenger 4. Never allow children to slide the shoulder front air bag can cause death or serious belt behind them or under their arm. injury to a child 12 years or younger, in- 5. You should read the instructions provided cluding a child in a rear-facing child re- with your child restraint to make sure that straint. you are using it properly. 69 Enhanced Seat Belt Use Reminder System BeltAlert Warning Sequence The outboard front passenger seat BeltAlert is (BeltAlert) not active when the outboard front passenger The BeltAlert warning sequence is activated seat is unoccupied. BeltAlert may be triggered Driver and Passenger BeltAlert (if equipped) when the vehicle is moving above a specified when an animal or other items are placed on the

SAFETY vehicle speed range and the driver or outboard BeltAlert is a feature intended to remind the outboard front passenger seat or when the seat front seat passenger is unbuckled (if equipped driver and outboard front seat passenger (if is folded flat (if equipped). It is recommended with outboard front passenger seat BeltAlert) equipped with outboard front passenger seat that pets be restrained in the rear seat (if (the outboard front passenger seat BeltAlert is BeltAlert) to buckle their seat belts. The Belt equipped) in pet harnesses or pet carriers that not active when the outboard front passenger Alert feature is active whenever the ignition are secured by seat belts, and cargo is properly seat is unoccupied). The BeltAlert warning se- switch is in the START or ON/RUN position. stowed. quence starts by blinking the Seat Belt Re- Initial Indication minder Light and sounding an intermittent BeltAlert can be activated or deactivated by chime. Once the BeltAlert warning sequence your authorized dealer. FCA US LLC does not If the driver is unbuckled when the ignition has completed, the Seat Belt Reminder Light recommend deactivating BeltAlert. switch is first in the START or ON/RUN position, will remain on until the seat belts are buckled. a chime will signal for a few seconds. If the The BeltAlert warning sequence may repeat NOTE: driver or outboard front seat passenger (if based on vehicle speed until the driver and If BeltAlert has been deactivated and the driver equipped with outboard front passenger seat occupied outboard front seat passenger seat or outboard front seat passenger (if equipped BeltAlert) is unbuckled when the ignition switch belts are buckled. The driver should instruct all with outboard front passenger seat BeltAlert) is is first in the START or ON/RUN position the occupants to buckle their seat belts. unbuckled the Seat Belt Reminder Light will Seat Belt Reminder Light will turn on and return on and remain on until the driver and Change of Status main on until both outboard front seat belts are outboard front seat passenger seat belts are buckled. The outboard front passenger seat If the driver or outboard front seat passenger (if buckled. BeltAlert is not active when an outboard front equipped with outboard front passenger seat passenger seat is unoccupied. BeltAlert) unbuckles their seat belt while the Lap/Shoulder Belts vehicle is traveling, the BeltAlert warning se- All seating positions in your vehicle are quence will begin until the seat belts are buck- equipped with lap/shoulder belts. led again. 70 The seat belt webbing retractor will lock only WARNING! WARNING! during very sudden stops or collisions. This • Do not allow people to ride in any area of feature allows the shoulder part of the seat belt • A lap belt worn too high can increase the your vehicle that is not equipped with seats to move freely with you under normal condi- risk of injury in a collision. The seat belt and seat belts. tions. However, in a collision the seat belt will forces won’t be at the strong hip and pelvic • Be sure everyone in your vehicle is in a seat lock and reduce your risk of striking the inside of bones, but across your abdomen. Always and using a seat belt properly. Occupants, the vehicle or being thrown out of the vehicle. wear the lap part of your seat belt as low as including the driver, should always wear possible and keep it snug. their seat belts whether or not an air bag is • A twisted seat belt may not protect you WARNING! also provided at their seating position to properly. In a collision, it could even cut minimize the risk of severe injury or death • Relying on the air bags alone could lead to into you. Be sure the seat belt is flat in the event of a crash. more severe injuries in a collision. The air against your body, without twists. If you • Wearing your seat belt incorrectly could bags work with your seat belt to restrain can’t straighten a seat belt in your vehicle, make your injuries in a collision much you properly. In some collisions, the air take it to your authorized dealer immedi- worse. You might suffer internal injuries, or bags won’t deploy at all. Always wear your ately and have it fixed. you could even slide out of the seat belt. seat belt even though you have air bags. • A seat belt that is buckled into the wrong Follow these instructions to wear your seat • In a collision, you and your passengers can buckle will not protect you properly. The belt safely and to keep your passengers suffer much greater injuries if you are not lap portion could ride too high on your safe, too. properly buckled up. You can strike the body, possibly causing internal injuries. • Two people should never be belted into a interior of your vehicle or other passengers, Always buckle your seat belt into the single seat belt. People belted together or you can be thrown out of the vehicle. buckle nearest you. can crash into one another in a collision, Always be sure you and others in your • A seat belt that is too loose will not protect hurting one another badly. Never use a vehicle are buckled up properly. you properly. In a sudden stop, you could lap/shoulder belt or a lap belt for more than • It is dangerous to ride in a cargo area, move too far forward, increasing the possi- one person, no matter what their size. inside or outside of a vehicle. In a collision, bility of injury. Wear your seat belt snugly. people riding in these areas are more likely to be seriously injured or killed.

71 WARNING! Lap/Shoulder Belt Operating Instructions seat). Grasp the latch plate and pull out the seat belt. Slide the latch plate up the web- • A seat belt that is worn under your arm is bing as far as necessary to allow the seat belt dangerous. Your body could strike the in- to go around your lap. SAFETY side surfaces of the vehicle in a collision, increasing head and neck injury. A seat 3. When the seat belt is long enough to fit, belt worn under the arm can cause internal insert the latch plate into the buckle until injuries. Ribs aren’t as strong as shoulder you hear a “click.” bones. Wear the seat belt over your shoul- 4. Position the lap belt so that it is snug and der so that your strongest bones will take lies low across your hips, below your abdo- the force in a collision. men. To remove slack in the lap belt portion, • A shoulder belt placed behind you will not pull up on the shoulder belt. To loosen the protect you from injury during a collision. lap belt if it is too tight, tilt the latch plate You are more likely to hit your head in a and pull on the lap belt. A snug seat belt collision if you do not wear your shoulder reduces the risk of sliding under the seat belt belt. The lap and shoulder belt are meant to be used together. in a collision. Pulling Out The Latch Plate • A frayed or torn seat belt could rip apart in 5. Position the shoulder belt across the shoul- a collision and leave you with no protec- 1 — Seat Belt Latch Plate der and chest with minimal, if any slack so tion. Inspect the seat belt system periodi- 2 — Seat Belt Buckle that it is comfortable and not resting on your cally, checking for cuts, frays, or loose neck. The retractor will withdraw any slack in parts. Damaged parts must be replaced the shoulder belt. immediately. Do not disassemble or 1. Enter the vehicle and close the door. Sit modify the seat belt system. Seat belt back and adjust the seat. 6. To release the seat belt, push the red button on the buckle. The seat belt will automati- assemblies must be replaced after a colli- 2. The seat belt latch plate is above the back of cally retract to its stowed position. If neces- sion. the front seat, and next to your arm in the sary, slide the latch plate down the webbing rear seat (for vehicles equipped with a rear to allow the seat belt to retract fully. 72 Lap/Shoulder Belt Untwisting Procedure NOTE: The adjustable upper shoulder belt anchorage is Use the following procedure to untwist a twisted equipped with an Easy Up feature. This feature lap/shoulder belt. allows the shoulder belt anchorage to be ad- 1. Position the latch plate as close as possible justed in the upward position without pushing or to the anchor point. squeezing the release button. To verify the 2. At about 6 to 12 inches (15 to 30 cm) above shoulder belt anchorage is latched, pull down- the latch plate, grasp and twist the seat belt ward on the shoulder belt anchorage until it is webbing 180 degrees to create a fold that locked into position. begins immediately above the latch plate. WARNING! 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the • Wearing your seat belt incorrectly could slot at the top of the latch plate. make your injuries in a collision much worse. You might suffer internal injuries, or 4. Continue to slide the latch plate up until it Adjustable Upper Anchorage you could even slide out of the seat belt. clears the folded webbing and the seat belt Follow these instructions to wear your seat is no longer twisted. As a guide, if you are shorter than average, you belt safely and to keep your passengers will prefer the shoulder belt anchorage in a Adjustable Upper Shoulder Belt Anchorage safe, too. lower position, and if you are taller than average, • Position the shoulder belt across the shoul- In the driver and front passenger seats, the top you will prefer the shoulder belt anchorage in a der and chest with minimal, if any slack so of the shoulder belt can be adjusted upward or higher position. After you release the anchorage that it is comfortable and not resting on downward to position the seat belt away from button, try to move it up or down to make sure your neck. The retractor will withdraw any your neck. Push or squeeze the anchorage but- that it is locked in position. slack in the shoulder belt. ton to release the anchorage, and move it up or • Misadjustment of the seat belt could re- down to the position that serves you best. duce the effectiveness of the safety belt in a crash.

73 Seat Belt Extender WARNING! Position the lap belt snug and low below the abdomen and across the strong bones of the If a seat belt is not long enough to fit properly, long enough and only use in the recom- hips. Place the shoulder belt across the chest even when the webbing is fully extended and mended seating positions. Remove and and away from the neck. Never place the shoul-

SAFETY the adjustable upper shoulder belt anchorage (if store the Seat Belt Extender when not der belt behind the back or under the arm. equipped) is in its lowest position, your autho- needed. rized dealer can provide you with a Seat Belt Seat Belt Pretensioner Extender. The Seat Belt Extender should be Seat Belts And Pregnant Women The front seat belt system is equipped with used only if the existing seat belt is not long pretensioning devices that are designed to re- enough. When the Seat Belt Extender is not move slack from the seat belt in the event of a required for a different occupant, it must be collision. These devices may improve the perfor- removed. mance of the seat belt by removing slack from WARNING! the seat belt early in a collision. Pretensioners work for all size occupants, including those in • ONLY use a Seat Belt Extender if it is child restraints. physically required in order to properly fit NOTE: the original seat belt system. DO NOT USE These devices are not a substitute for proper the Seat Belt Extender if, when worn, the seat belt placement by the occupant. The seat distance between the front edge of the Seat Belt Extender buckle and the center Pregnant Women And Seat Belts belt still must be worn snugly and positioned of the occupant’s body is LESS than properly. Seat belts must be worn by all occupants in- 6 inches. The pretensioners are triggered by the Occupant cluding pregnant women: the risk of injury in • Using a Seat Belt Extender when not Restraint Controller (ORC). Like the air bags, the event of an accident is reduced for the needed can increase the risk of serious the pretensioners are single use items. A de- mother and the unborn child if they are wearing injury or death in a collision. Only use the ployed pretensioner or a deployed air bag must Seat Belt Extender when the lap belt is not a seat belt. be replaced immediately. 74 Energy Management Feature — If Equipped essary to comfortably wrap around the occupant’s mid-section. Slide the latch plate into the The front seat belt system is equipped and the buckle until you hear a "click." second row outboard seat belt system may be equipped with an Energy Management feature In Automatic Locking Mode, the shoulder belt is that may help further reduce the risk of injury in automatically pre-locked. The seat belt will still the event of a collision. The seat belt system has retract to remove any slack in the shoulder belt. a retractor assembly that is designed to release Use the Automatic Locking Mode anytime a webbing in a controlled manner. child restraint is installed in a seating position that has a seat belt with this feature. Children Switchable Automatic Locking Retractors 12 years old and under should always be prop- (ALR) erly restrained in a vehicle with a rear seat. The seat belts in the passenger seating posi- WARNING! tions are equipped with a Switchable Automatic Locking Retractor (ALR) which is used to secure ALR — Switchable Automatic Locking • Never place a rear-facing child restraint in a child restraint system. For additional informa- Retractor (Third Row Shown — If front of an air bag. A deploying passenger tion, refer to “Installing Child Restraints Using Equipped) front air bag can cause death or serious The Vehicle Seat Belt” under the “Child Re- If the passenger seating position is equipped injury to a child 12 years or younger, including a child in a rear-facing child restraints” section of this manual. The figure with an ALR and is being used for normal usage, straint. below illustrates the locking feature for each only pull the seat belt webbing out far enough to • Only use a rear-facing child restraint in a seating position. comfortably wrap around the occupant’s mid- vehicle with a rear seat. section so as to not activate the ALR. If the ALR is activated, you will hear a clicking sound as the seat belt retracts. Allow the webbing to retract completely in this case and then carefully pull out only the amount of webbing nec-

75 How To Engage The Automatic Locking Mode WARNING! How The Active Head Restraints (AHR) Work 1. Buckle the combination lap and shoulder checked according to the procedures in The Occupant Restraint Controller (ORC) deter- belt. the Service Manual. mines whether the severity or type of rear im-

SAFETY 2. Grasp the shoulder portion and pull down- • Failure to replace the seat belt assembly pact will require the Active Head Restraints ward until the entire seat belt is extracted. could increase the risk of injury in colli- (AHR) to deploy. If a rear impact requires deployment, both the driver and front passenger 3. Allow the seat belt to retract. As the seat belt sions. retracts, you will hear a clicking sound. This • Do not use the Automatic Locking Mode to seat AHRs will be deployed. restrain occupants who are wearing the indicates the seat belt is now in the Auto- When AHRs deploy during a rear impact, the seat belt or children who are using booster matic Locking Mode. front half of the head restraint extends forward seats. The locked mode is only used to to minimize the gap between the back of the How To Disengage The Automatic Locking Mode install rear-facing or forward-facing child occupant’s head and the AHR. This system is restraints that have a harness for restrain- Unbuckle the combination lap/shoulder belt designed to help prevent or reduce the extent of and allow it to retract completely to disengage ing the child. injuries to the driver and front passenger in the Automatic Locking Mode and activate the certain types of rear impacts. vehicle sensitive (emergency) locking mode. Supplemental Active Head Restraints (AHR) These head restraints are passive, deployable NOTE: WARNING! components, and vehicles with this equipment The Active Head Restraints (AHR) may or may cannot be readily identified by any markings, not deploy in the event of a front or side impact. • The seat belt assembly must be replaced if only through visual inspection of the head re- However, if during a front impact, a secondary the switchable Automatic Locking Retrac- rear impact occurs, the AHR may deploy based tor (ALR) feature or any other seat belt straint. The head restraint will be split in two on the severity and type of the impact. function is not working properly when halves, with the front half being soft foam and trim, the back half being decorative plastic.

76 Active Head Restraint (AHR) Components: WARNING! NOTE: For more information on properly adjusting and • All occupants, including the driver, should positioning the head restraint, refer to “Head not operate a vehicle or sit in a vehicle’s Restraints” in “Getting To Know Your Vehicle.” seat until the head restraints are placed in Resetting Active Head Restraints (AHR) their proper positions in order to minimize the risk of neck injury in the event of a collision. • Do not place items over the top of the Active Head Restraint, such as coats, seat covers or portable DVD players. These items may interfere with the operation of the Active Head Restraint in the event of a collision and could result in serious injury or death. Active Head Restraint (AHR) Components • Active Head Restraints may be deployed if they are struck by an object such as a 1 — Head Restraint Front Half (Soft hand, foot or loose cargo. To avoid acciden- Foam And Trim) tal deployment of the Active Head Re- 2 — Head Restraint Back Half (Decora- straint, ensure that all cargo is secured, as tive Plastic Rear Cover) Active Head Restraint (AHR) Deployed 3 — Head Restraint Guide Tubes loose cargo could contact the Active Head Restraint during sudden stops. Failure to 4 — Seat Back If the Active Head Restraints are triggered dur- follow this warning could cause personal ing a collision, the front half of the head re- injury if the Active Head Restraint is de- straint will be extended forward and separated ployed. from the rear half of the head restraint (See Image). Do not drive your vehicle after the AHRs have deployed. The head restraint must be reset 77 into the original position to best protect the The air bag system must be ready to protect you in a Air Bag Warning Light occupant for all types of collisions. An autho- collision. The Occupant Restraint Controller (ORC) The ORC monitors the readiness of the rized FCA US LLC dealer must reset the AHRs monitors the internal circuits and interconnecting electronic parts of the air bag system whenever on the driver’s and front passenger’s seat before wiring associated with the electrical Air Bag System

SAFETY the ignition switch is in the START or ON/RUN driving. Personally attempting to reset the AHRs Components. Your vehicle may be equipped with the position. If the ignition switch is in the OFF may result in damage to the AHRs that could following Air Bag System Components: position or in the ACC position, the air bag impair their function. Air Bag System Components system is not on and the air bags will not inflate. Occupant Restraint Controller (ORC) WARNING! • The ORC contains a backup power supply sys- • Air Bag Warning Light tem that may deploy the air bag system even if Deployed AHRs are not able to best protect • Steering Wheel and Column the battery loses power or it becomes discon- you in all types of collisions. Have deployed nected prior to deployment. AHRs reset by an authorized dealer immedi- • Instrument Panel ately. • Knee Impact Bolsters The ORC turns on the Air Bag Warning Light in the instrument panel for approximately four to • Driver and Front Passenger Air Bags Supplemental Restraint Systems (SRS) eight seconds for a self-check when the ignition • Seat Belt Buckle Switch switch is first in the ON/RUN position. After the Some of the safety features described in this self-check, the Air Bag Warning Light will turn section may be standard equipment on some • Supplemental Side Air Bags off. If the ORC detects a malfunction in any part models, or may be optional equipment on oth- • Supplemental Knee Air Bags of the system, it turns on the Air Bag Warning ers. If you are not sure, ask your authorized • Front and Side Impact Sensors Light, either momentarily or continuously. A dealer. • Seat Belt Pretensioners single chime will sound to alert you if the light • Seat Track Position Sensors comes on again after initial startup.

78 The ORC also includes diagnostics that will WARNING! illuminate the instrument panel Air Bag Warn- ing Light if a malfunction is detected that could Ignoring the Air Bag Warning Light in your affect the air bag system. The diagnostics also instrument panel could mean you won’t have record the nature of the malfunction. While the the air bag system to protect you in a colli- air bag system is designed to be maintenance sion. If the light does not come on as a bulb free, if any of the following occurs, have an check when the ignition is first turned on, authorized dealer service the air bag system stays on after you start the vehicle, or if it immediately. comes on as you drive, have an authorized dealer service the air bag system immedi- • The Air Bag Warning Light does not come on ately. during the four to eight seconds when the ignition switch is first in the ON/RUN position. Front Air Bags • The Air Bag Warning Light remains on after This vehicle has front air bags and lap/shoulder the four to eight-second interval. belts for both the driver and front passenger. Front Air Bag/Knee Bolster Locations • The Air Bag Warning Light comes on intermit- The front air bags are a supplement to the seat 1 — Driver And Passenger Front Air Bags tently or remains on while driving. belt restraint systems. The driver front air bag is 2 — Passenger Knee Impact Bolster mounted in the center of the steering wheel. 3 — Driver Knee Impact Bolster/ NOTE: The passenger front air bag is mounted in the Supplemental Driver Knee Air Bag If the speedometer, tachometer, or any engine instrument panel, above the glove compart- related gauges are not working, the Occupant ment. The words “SRS AIRBAG” or “AIRBAG” Restraint Controller (ORC) may also be dis- are embossed on the air bag covers. abled. In this condition the air bags may not be ready to inflate for your protection. Have an authorized dealer service the air bag system immediately.

79 Occupant Restraint Controller (ORC), which WARNING! may receive information from the front impact WARNING! • Being too close to the steering wheel or sensors (if equipped) or other system compo- steering wheel because any such objects instrument panel during front air bag de- nents. could cause harm if the vehicle is in a SAFETY collision severe enough to cause the air ployment could cause serious injury, in- The first stage inflator is triggered immediately cluding death. Air bags need room to in- bag to inflate. during an impact that requires air bag deploy- • Do not put anything on or around the air flate. Sit back, comfortably extending your ment. A low energy output is used in less severe bag covers or attempt to open them manu- arms to reach the steering wheel or instru- collisions. A higher energy output is used for ally. You may damage the air bags and you ment panel. more severe collisions. • Never place a rear-facing child restraint in could be injured because the air bags may front of an air bag. A deploying passenger This vehicle may be equipped with a driver no longer be functional. The protective front air bag can cause death or serious and/or front passenger seat belt buckle switch covers for the air bag cushions are de- injury to a child 12 years or younger, in- that detects whether the driver or front passen- signed to open only when the air bags are cluding a child in a rear-facing child re- ger seat belt is buckled. The seat belt buckle inflating. • Relying on the air bags alone could lead to straint. switch may adjust the inflation rate of the Ad- • Only use a rear-facing child restraint in a vanced Front Air Bags. more severe injuries in a collision. The air bags work with your seat belt to restrain vehicle with a rear seat. This vehicle may be equipped with driver and/or you properly. In some collisions, air bags front passenger seat track position sensors that won’t deploy at all. Always wear your seat Driver And Passenger Front Air Bag Fea- may adjust the inflation rate of the Advanced belts even though you have air bags. tures Front Air Bags based upon seat position. The Advanced Front Air Bag system has multi- stage driver and front passenger air bags. This WARNING! system provides output appropriate to the sever- • No objects should be placed over or near ity and type of collision as determined by the the air bag on the instrument panel or

80 Front Air Bag Operation When the ORC detects a collision requiring the Supplemental Driver Knee Air Bag front air bags, it signals the inflator units. A Front Air Bags are designed to provide addi- This vehicle is equipped with a Supplemental large quantity of non-toxic gas is generated to tional protection by supplementing the seat inflate the front air bags. Driver Knee Air Bag mounted in the instrument belts. Front air bags are not expected to reduce panel below the steering column. The Supple- the risk of injury in rear, side, or rollover colli- The steering wheel hub trim cover and the upper mental Driver Knee Air Bag provides enhanced sions. The front air bags will not deploy in all right side of the instrument panel separate and protection during a frontal impact by working frontal collisions, including some that may pro- fold out of the way as the air bags inflate to their together with the seat belts, pretensioners, and duce substantial vehicle damage — for ex- full size. The front air bags fully inflate in less front air bags. time than it takes to blink your eyes. The front ample, some pole collisions, truck underrides, air bags then quickly deflate while helping to Supplemental Side Air Bags and angle offset collisions. restrain the driver and front passenger. Supplemental Seat-Mounted Side Air Bags On the other hand, depending on the type and Knee Impact Bolsters (SABs) location of impact, front air bags may deploy in crashes with little vehicle front-end damage but The Knee Impact Bolsters help protect the This vehicle is equipped with Supplemental that produce a severe initial deceleration. knees of the driver and front passenger, and Seat-Mounted Side Air Bags (SABs). position the front occupants for improved inter- Because air bag sensors measure vehicle decel- action with the front air bags. Supplemental Seat-Mounted Side Air Bags eration over time, vehicle speed and damage by (SABs) are located in the outboard side of the themselves are not good indicators of whether or WARNING! front seats. The SABs are marked with a “SRS not an air bag should have deployed. AIRBAG” or “AIRBAG” label sewn into the outboard side of the seats. Seat belts are necessary for your protection in all • Do not drill, cut, or tamper with the knee impact bolsters in any way. collisions, and also are needed to help keep you • Do not mount any accessories to the knee in position, away from an inflating air bag. impact bolsters such as alarm lights, ste- reos, citizen band radios, etc.

81 The SABs may help to reduce the risk of occu- occupants if they are not seated properly, or if pant injury during certain side impacts, in ad- items are positioned in the area where the SAB dition to the injury reduction potential provided inflates. Children are at an even greater risk of by the seat belts and body structure. injury from a deploying air bag. SAFETY WARNING!

Do not use accessory seat covers or place objects between you and the Side Air Bags; the performance could be adversely affected and/or objects could be pushed into you, causing serious injury.

Supplemental Side Air Bag Inflatable Curtains (SABICs) Supplemental Side Air Bag Inflatable This vehicle is equipped with Supplemental Curtain (SABIC) Label Location Side Air Bag Inflatable Curtains (SABICs). SABICs may help reduce the risk of head and Supplemental Side Air Bag Inflatable Curtains other injuries to front and rear seat outboard Front Supplemental Seat-Mounted Side (SABICs) are located above the side windows. Air Bag Label occupants in certain side impacts, in addition The trim covering the SABICs is labeled “SRS to the injury reduction potential provided by the When the SAB deploys, it opens the seam on AIRBAG” or “AIRBAG.” seat belts and body structure. the outboard side of the seatback’s trim cover. The SABIC deploys downward, covering the The inflating SAB deploys through the seat side windows. An inflating SABIC pushes the seam into the space between the occupant and outside edge of the headliner out of the way and the door. The SAB moves at a very high speed covers the window. The SABICs inflate with and with such a high force that it could injure enough force to injure occupants if they are not 82 belted and seated properly, or if items are posi- Side Impacts Side Air Bags are a supplement to the seat belt tioned in the area where the SABICs inflate. restraint system. Side Air Bags deploy in less The Side Air Bags are designed to activate in Children are at an even greater risk of injury time than it takes to blink your eyes. certain side impacts. The Occupant Restraint from a deploying air bag. Controller (ORC) determines whether the de- The SABICs may help reduce the risk of partial ployment of the Side Air Bags in a particular WARNING! or complete ejection of vehicle occupants impact event is appropriate, based on the sever- • Occupants, including children, who are up through side windows in certain side impact ity and type of collision. The side impact sensors against or very close to Side Air Bags can events. aid the ORC in determining the appropriate be seriously injured or killed. Occupants, response to impact events. The system is cali- including children, should never lean on or WARNING! brated to deploy the Side Air Bags on the impact sleep against the door, side windows, or side of the vehicle during impacts that require area where the side air bags inflate, even if • Do not mount equipment, or stack luggage Side Air Bag occupant protection. In side im- they are in an infant or child restraint. or other cargo up high enough to block the pacts, the Side Air Bags deploy independently; • Seat belts (and child restraints where ap- deployment of the SABICs. The trim cov- a left side impact deploys the left Side Air Bags propriate) are necessary for your protection ering above the side windows where the only and a right-side impact deploys the right in all collisions. They also help keep you in SABIC and its deployment path are located Side Air Bags only. Vehicle damage by itself is position, away from an inflating Side Air should remain free from any obstructions. Bag. To get the best protection from the • In order for the SABICs to work as in- not a good indicator of whether or not Side Air Bags should have deployed. Side Air Bags, occupants must wear their tended, do not install any accessory items seat belts properly and sit upright with in your vehicle which could alter the roof. The Side Air Bags will not deploy in all side their backs against the seats. Children Do not add an aftermarket sunroof to your collisions, including some collisions at certain must be properly restrained in a child re- vehicle. Do not add roof racks that require angles, or some side collisions that do not im- straint or booster seat that is appropriate permanent attachments (bolts or screws) pact the area of the passenger compartment. for the size of the child. for installation on the vehicle roof. Do not The Side Air Bags may deploy during angled or drill into the roof of the vehicle for any offset frontal collisions where the front air bags reason. deploy.

83 WARNING! the severity and type of collision. Vehicle dam- • Steering Wheel and Column age by itself is not a good indicator of whether or • Instrument Panel • Side Air Bags need room to inflate. Do not not Side Air Bags should have deployed. • Knee Impact Bolsters lean against the door or window. Sit up- SAFETY The Side Air Bags will not deploy in all rollover • Driver and Front Passenger Air Bags right in the center of the seat. events. The rollover sensing system determines • Being too close to the Side Air Bags during if a rollover event may be in progress and • Seat Belt Buckle Switch deployment could cause you to be severely whether deployment is appropriate. In the event • Supplemental Side Air Bags injured or killed. the vehicle experiences a rollover or near roll- • Relying on the Side Air Bags alone could • Supplemental Knee Air Bags over event, and deployment of the Side Air Bags lead to more severe injuries in a collision. • Front and Side Impact Sensors The Side Air Bags work with your seat belt is appropriate, the rollover sensing system will • Seat Belt Pretensioners to restrain you properly. In some collisions, also deploy the seat belt pretensioners on both Side Air Bags won’t deploy at all. Always sides of the vehicle. • Seat Track Position Sensors wear your seat belt even though you have The SABICs may help reduce the risk of partial If A Deployment Occurs Side Air Bags. or complete ejection of vehicle occupants through side windows in certain rollover or side The front air bags are designed to deflate imme- NOTE: diately after deployment. impact events. Air bag covers may not be obvious in the interior NOTE: trim, but they will open during air bag deploy- Air Bag System Components Front and/or side air bags will not deploy in all ment. NOTE: collisions. This does not mean something is Rollover Events The Occupant Restraint Controller (ORC) moni- wrong with the air bag system. Side Air Bags are designed to activate in certain tors the internal circuits and interconnecting rollover events. The ORC determines whether wiring associated with electrical Air Bag System the deployment of the Side Air Bags in a par- Components listed below: ticular rollover event is appropriate, based on • Occupant Restraint Controller (ORC) • Air Bag Warning Light 84 If you do have a collision which deploys the air Do not drive your vehicle after the air bags have Enhanced Accident Response System bags, any or all of the following may occur: deployed. If you are involved in another colli- In the event of an impact, if the communication sion, the air bags will not be in place to protect • The air bag material may sometimes cause network remains intact, and the power remains you. abrasions and/or skin reddening to the occu- intact, depending on the nature of the event, the pants as the air bags deploy and unfold. The ORC will determine whether to have the En- abrasions are similar to friction rope burns or WARNING! hanced Accident Response System perform the those you might get sliding along a carpet or Deployed air bags and seat belt pretension- following functions: gymnasium floor. They are not caused by con- ers cannot protect you in another collision. • Cut off fuel to the engine. tact with chemicals. They are not permanent Have the air bags, seat belt pretensioners, • Flash hazard lights as long as the battery has and normally heal quickly. However, if you and the seat belt retractor assemblies re- power or until the hazard light button is haven’t healed significantly within a few days, placed by an authorized dealer immediately. pressed. The hazard lights can be deactivated or if you have any blistering, see your doctor Also, have the Occupant Restraint Controller by pressing the hazard light button. immediately. System serviced as well. • Turn on the interior lights, which remain on as • As the air bags deflate, you may see some NOTE: long as the battery has power. smoke-like particles. The particles are a normal by-product of the process that generates • Air bag covers may not be obvious in the • Unlock the power door locks. the non-toxic gas used for air bag inflation. interior trim, but they will open during air bag deployment. Enhanced Accident Response System Reset These airborne particles may irritate the skin, Procedure eyes, nose, or throat. If you have skin or eye • After any collision, the vehicle should be irritation, rinse the area with cool water. For taken to an authorized dealer immediately. In order to reset the Enhanced Accident Re- nose or throat irritation, move to fresh air. If sponse System functions after an event, the the irritation continues, see your doctor. If ignition switch must be changed from ignition these particles settle on your clothing, follow START or ON/RUN to ignition OFF. Carefully check the vehicle for fuel leaks in the engine the garment manufacturer’s instructions for compartment and on the ground near the en- cleaning. gine compartment and fuel tank before resetting the system and starting the engine. 85 Maintaining Your Air Bag System These data can help provide a better under- WARNING! standing of the circumstances in which crashes WARNING! manufacturer approved seat accessories and injuries occur. may be used. If it is necessary to modify the

SAFETY • Modifications to any part of the air bag air bag system for persons with disabilities, NOTE: system could cause it to fail when you need contact your authorized dealer. EDR data are recorded by your vehicle only if a it. You could be injured if the air bag system non-trivial crash situation occurs; no data are is not there to protect you. Do not modify the Event Data Recorder (EDR) recorded by the EDR under normal driving con- components or wiring, including adding any ditions and no personal data (e.g., name, gen- This vehicle is equipped with an event data kind of badges or stickers to the steering der, age, and crash location) are recorded. How- wheel hub trim cover or the upper right side recorder (EDR). The main purpose of an EDR is ever, other parties, such as law enforcement, of the instrument panel. Do not modify the to record, in certain crash or near crash-like could combine the EDR data with the type of front bumper, vehicle body structure, or add situations, such as an air bag deployment or personally identifying data routinely acquired aftermarket side steps or running boards. hitting a road obstacle, data that will assist in during a crash investigation. • It is dangerous to try to repair any part of understanding how a vehicle’s systems per- the air bag system yourself. Be sure to tell formed. The EDR is designed to record data To read data recorded by an EDR, special equip- anyone who works on your vehicle that it related to vehicle dynamics and safety systems ment is required, and access to the vehicle or has an air bag system. for a short period of time, typically 30 seconds the EDR is needed. In addition to the vehicle • Do not attempt to modify any part of your air or less. The EDR in this vehicle is designed to manufacturer, other parties, such as law en- bag system. The air bag may inflate acciden- record such data as: forcement, that have the special equipment, tally or may not function properly if modifi- can read the information if they have access to cations are made. Take your vehicle to an • How various systems in your vehicle were the vehicle or the EDR. authorized dealer for any air bag system operating; service. If your seat, including your trim • Whether or not the driver and passenger safety cover and cushion, needs to be serviced in belts were buckled/fastened; any way (including removal or loosening/ tightening of seat attachment bolts), take • How far (if at all) the driver was depressing the the vehicle to your authorized dealer. Only accelerator and/or brake pedal; and, • How fast the vehicle was traveling. 86 Child Restraints WARNING! Before buying any restraint system, make sure that it has a label certifying that it meets all Everyone in your vehicle needs to be buckled up force required to hold even an infant on your applicable Safety Standards. You should also at all times, including babies and children. lap could become so great that you could not make sure that you can install it in the vehicle Every state in the United States, and every hold the child, no matter how strong you are. where you will use it. Canadian province, requires that small children The child and others could be badly injured ride in proper restraint systems. This is the law, or killed. Any child riding in your vehicle NOTE: and you can be prosecuted for ignoring it. should be in a proper restraint for the child’s • For additional information, refer to size. Children 12 years or younger should ride prop- www.safercar.gov/parents/index.htm or call: erly buckled up in a rear seat, if available. There are different sizes and types of restraints 1–888–327–4236 According to crash statistics, children are safer for children from newborn size to the child when properly restrained in the rear seats rather • Canadian residents should refer to Transport almost large enough for an adult safety belt. than in the front. Canada’s website for additional information: Always check the child seat Owner’s Manual to http://www.tc.gc.ca/eng/motorvehiclesafety/ make sure you have the correct seat for your safedrivers-childsafety-index-53.htm WARNING! child. Carefully read and follow all the instruc- In a collision, an unrestrained child can be- tions and warnings in the child restraint Owner’s come a projectile inside the vehicle. The Manual and on all the labels attached to the child restraint.

87 Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Children who are two years old or younger and Either an Infant Carrier or a Convertible Child Re- Infants and Toddlers who have not reached the height or weight limits straint, facing rearward in the rear seat of the ve- SAFETY of their child restraint hicle Children who are at least two years old or who Forward-Facing Child Restraint with a five-point Small Children have outgrown the height or weight limit of their Harness, facing forward in the rear seat of the rear-facing child restraint vehicle Children who have outgrown their forward-facing Belt Positioning Booster Seat and the vehicle seat Larger Children child restraint, but are too small to properly fit the belt, seated in the rear seat of the vehicle vehicle’s seat belt Children 12 years old or younger, who have out- Vehicle Seat Belt, seated in the rear seat of the Children Too Large for Child Restraints grown the height or weight limit of their booster vehicle seat

Infant And Child Restraints of the infant carrier. Convertible child seats can WARNING! be used either rear-facing or forward-facing in Safety experts recommend that children ride the vehicle. Convertible child seats often have a rear-facing in the vehicle until they are two years • Never place a rear-facing child restraint in higher weight limit in the rear-facing direction old or until they reach either the height or front of an air bag. A deploying passenger than infant carriers do, so they can be used front air bag can cause death or serious weight limit of their rear-facing child restraint. rear-facing by children who have outgrown their injury to a child 12 years or younger, in- Two types of child restraints can be used rear- infant carrier but are still less than at least two cluding a child in a rear-facing child re- facing: infant carriers and convertible child years old. Children should remain rear-facing straint. seats. until they reach the highest weight or height • Only use a rear-facing child restraint in a The infant carrier is only used rear-facing in the allowed by their convertible child seat. vehicle with a rear seat. vehicle. It is recommended for children from birth until they reach the weight or height limit 88 WARNING! Older Children And Child Restraints WARNING! Children who are two years old or who have Do not install a rear-facing car seat using a outgrown their rear-facing convertible child seat • Improper installation can lead to failure of rear support leg in this vehicle. The floor of can ride forward-facing in the vehicle. Forward- an infant or child restraint. It could come this vehicle is not designed to manage the loose in a collision. The child could be facing child seats and convertible child seats crash forces of this type of car seat. In a badly injured or killed. Follow the child used in the forward-facing direction are for chil- crash, the support leg may not function as it restraint manufacturer’s directions exactly dren who are over two years old or who have was designed by the car seat manufacturer, when installing an infant or child restraint. and your child may be more severely injured outgrown the rear-facing weight or height limit • After a child restraint is installed in the as a result. of their rear-facing convertible child seat. Chil- vehicle, do not move the vehicle seat for- dren should remain in a forward-facing child ward or rearward because it can loosen the seat with a harness for as long as possible, up to child restraint attachments. Remove the the highest weight or height allowed by the child child restraint before adjusting the vehicle seat. seat position. When the vehicle seat has All children whose weight or height is above the been adjusted, reinstall the child restraint. • When your child restraint is not in use, forward-facing limit for the child seat should secure it in the vehicle with the seat belt or use a belt-positioning booster seat until the LATCH anchorages, or remove it from the vehicle’s seat belts fit properly. If the child vehicle. Do not leave it loose in the vehicle. cannot sit with knees bent over the vehicle’s In a sudden stop or accident, it could strike seat cushion while the child’s back is against the occupants or seatbacks and cause se- the seatback, they should use a belt-positioning rious personal injury. booster seat. The child and belt-positioning booster seat are held in the vehicle by the seat belt.

89 Integrated Child Booster Seat — If NOTE: Equipped The second row bench with Integrated Child Booster Seat must remain in the full rear The Integrated Child Booster Seat is located in position during use. SAFETY each outboard second-row passenger seat. 2. Pull the release loop forward to release the WARNING! latch and seat cushion.

DEATH or SERIOUS INJURY can occur, • Follow all instructions on the child restraint and in the vehicle’s owner’s manual. • The second row bench with Integrated Child Booster Seat must remain in the full rear position during use. • Use only with children who weigh between Booster Seat 48 and 85 pounds (22 and 39 kg) and 4. Place the child upright in the seat with their whose height is between 47 and 57 in back firmly against the seatback. (119 and 145 cm). 5. Grasp the latch plate and pull out the seat To position a child into the Integrated Child belt. Booster Seat follow these steps: Release Loop 6. Slide the latch plate up the webbing as far as 1. Slide the second row seat to the full rear necessary to allow the seat belt to go around 3. Lift the seat cushion up and push back to position to use the Integrated Child Booster the child’s lap. Seat. lock it in the booster seat position. NOTE: The lap portion of the seat belt should be low on the hips and as snug as possible. 90 7. Once the seat belt is long enough to fit WARNING! 4. Is the lap part of the belt as low as possible, properly, insert the latch plate into the touching the child’s thighs and not the buckle until you hear a “click.” • The vehicle cannot be driven away from stomach? the scene. 8. To remove the slack from the lap belt, pull • The vehicle door nearest the seat has been 5. Can the child stay seated like this for the upward on the shoulder portion of the seat damaged. whole trip? belt. • At least one occupant was injured in the If the answer to any of these questions was 9. To release the seat belt, push the red button crash. “no,” then the child still needs to use a booster on the buckle. • At least one air bag in the vehicle deployed seat in this vehicle. If the child is using the in the crash. lap/shoulder belt, check seat belt fit periodically WARNING! Children Too Large For Booster Seats and make sure the seat belt buckle is latched. A child’s squirming or slouching can move the Securely lock the seat cushion into position Children who are large enough to wear the before using the seat. Otherwise, the seat will belt out of position. If the shoulder belt contacts shoulder belt comfortably, and whose legs are not provide the proper stability for child seats the face or neck, move the child closer to the long enough to bend over the front of the seat and/or passengers. An improperly latched center of the vehicle, or use a booster seat to seat cushion could cause serious injury or when their back is against the seatback, should position the seat belt on the child correctly. death. use the seat belt in a rear seat. Use this simple 5-step test to decide whether the child can use WARNING! the vehicle’s seat belt alone: WARNING! 1. Can the child sit all the way back against the Never allow a child to put the shoulder belt under an arm or behind their back. In a In a severe collision, the booster seat may be back of the vehicle seat? crash, the shoulder belt will not protect a damaged and should be inspected by an 2. Do the child’s knees bend comfortably over child properly, which may result in serious authorized dealer and possibly replaced be- the front of the vehicle seat – while the child injury or death. A child must always wear fore it is used again. The integrated booster is still sitting all the way back? both the lap and shoulder portions of the seat seat must be replaced following a collision belt correctly. that meets any of the following criteria: 3. Does the shoulder belt cross the child’s shoulder between their neck and arm? 91 Recommendations For Attaching Child Restraints Restraint Type Combined Weight of the Use Any Attachment Method Shown With An “X” Below Child + Child Restraint LATCH – Lower Anchors Seat Belt Only LATCH – Lower Anchors Seat Belt + Top Tether Only + Top Tether Anchor Anchor SAFETY Rear-Facing Child Up to 65 lbs (29.5 kg) XX Restraint Rear-Facing Child More than 65 lbs X Restraint (29.5 kg) Forward-Facing Child Up to 65 lbs (29.5 kg) X X Restraint Forward-Facing Child More than 65 lbs X Restraint (29.5 kg)

92 Lower Anchors And Tethers For CHildren Your vehicle is equipped with the child restraint LATCH Positions For Installing Child Re- (LATCH) Restraint System anchorage system called LATCH, which stands straints In This Vehicle for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCH-equipped child seats. There are two lower anchorages located at the back of the seat cushion where it meets the seatback and one top tether anchorage located behind the seating position. These anchorages are used to install LATCH-equipped child seats without using the vehicle’s seat belts. Some seating positions may have a top tether anchorage but no lower anchorages. In these seating positions, the seat belt must be used with the top tether anchorage to install the child restraint. Please see the following table for more information. LATCH Label Lower Anchor / Top Tether Locations (Third Row Shown – If Equipped) Lower Anchorage Symbol (2 Anchor- ages Per Seating Position) Top Tether Anchorage Symbol

93 Frequently Asked Questions About Installing Child Restraints With LATCH Use the LATCH anchorage system until the com- What is the weight limit (child’s weight + weight bined weight of the child and the child restraint is of the child restraint) for using the LATCH anchor- 65 lbs (29.5 kg) 65 lbs (29.5 kg). Use the seat belt and tether SAFETY age system to attach the child restraint? anchor instead of the LATCH system once the combined weight is more than 65 lbs (29.5 kg). Do not use the seat belt when you use the LATCH anchorage system to attach a rear-facing or Can the LATCH anchorages and the seat belt be forward-facing child restraint. used together to attach a rear-facing or forward- No Booster seats may be attached to the LATCH an- facing child restraint? chorages if allowed by the booster seat manufacturer. See your booster seat owner’s manual for more information. Never “share” a LATCH anchorage with two or more child restraints. If the center position does Can two child restraints be attached using a com- not have dedicated LATCH lower anchorages, use No mon lower LATCH anchorage? the seat belt to install a child seat in the center position next to a child seat using the LATCH anchorages in an outboard position. The child seat may touch the back of the front Can the rear-facing child restraint touch the back passenger seat if the child restraint manufacturer Yes of the front passenger seat? also allows contact. See your child restraint Own- er’s Manual for more information. Can the head restraints be removed? Yes All second row head restraints are removable.

94 Locating The LATCH Anchorages Locating The Upper Tether Anchorages LATCH-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side. Each will have a hook or connector There are tether strap anchorages behind each The lower anchorages are round bars that are to attach to the lower anchorage and a way to second row seating position, located on the found at the rear of the seat cushion where it tighten the connection to the anchorage. back of the seat, near the floor. meets the seatback. They are just visible when Forward-facing child restraints and some rear- you lean into the rear seat to install the child facing child restraints will also be equipped with restraint. You will easily feel them if you run your a tether strap. The tether strap will have a hook finger along the gap between the seatback and at the end to attach to the top tether anchorage seat cushion. and a way to tighten the strap after it is attached to the anchorage. Center Seat LATCH This vehicle has 5 lower LATCH anchorages in the rear seat. Anchorages A and B are used for the right outboard position behind the front passenger (1). Anchorages D and E are used for the left outboard position behind the driver (3). Anchorages B and C are used for the center seating position (2). Do not install a LATCH- Tether Anchorages (Second Row 60/40) compatible child restraint using anchorages C and D. This is not a LATCH-compatible position in your vehicle.

Rear Seat Lower Anchorages (Second Row 60/40)

95 You can install up to two child seats using the Options for installing two child seats using the LATCH system at the same time. If you are LATCH anchorages in this vehicle: WARNING! installing three child restraints, you must use 1. Right and left outboard seating positions • Use anchorages B and C to install a the seat belt to install the center child restraint. (1 and 3): Install the child seats in the right LATCH-compatible child restraint in the SAFETY You can use either the LATCH anchors for posi- and left outboard seating positions using center seating position (2). Do not install a tions (1) and (3) or the vehicle’s seat belt for lower anchorages A and B, and D and E. Do LATCH-compatible child restraint using installing the child seats in the outboard posi- not use the center seat anchorage, C. If the anchorages C and D. This is not a LATCH- tions. child seats do not block the center seat belt compatible position in your vehicle. webbing and buckle, the center seat belt can • A child restraint installed in the center be used to restrain an occupant or child position (2) will block the seat belt buckle restraint in the center seating position. for the empty right outboard seat behind the front passenger (1). Do not use this 2. Left outboard and center seating positions seat for another occupant. (3 and 2): Install the first child seat in the • Never use the same lower anchorage to left outboard seating position using lower attach more than one child restraint. anchorages D and E. Install the second child • If you are installing three child restraints seat using the center anchorages, B and C. next to each other, you must use the seat Do not use the outer anchorage closest to the belt and the center tether anchor for the opposite door, A. Do not use the remaining center position. You can then use either right outboard seating position (1) for any the LATCH anchors or the vehicle’s seat occupant. The center child restraint will belt for installing the child seats in the block the seat belt buckle for this position. outboard positions. Please refer to “Install- Lower Anchors ing the LATCH-Compatible Child Restraint System” for typical installation instructions.

96 Always follow the directions of the child re- 3. Attach the lower hooks or connectors of the accidentally lock the seat belt retractor. Before straint manufacturer when installing your child child restraint to the lower anchorages in the installing a child restraint using the LATCH restraint. Not all child restraint systems will be selected seating position. system, buckle the seat belt behind the child installed as described here. 4. If the child restraint has a tether strap, con- restraint and out of the child’s reach. If the To Install A LATCH-Compatible Child Re- nect it to the top tether anchorage. See the buckled seat belt interferes with the child restraint section “Installing Child Restraints Using straint installation, instead of buckling it behind the Top Tether Anchorage” for directions to the child restraint, route the seat belt through If the selected seating position has a Switchable attach a tether anchor. the child restraint belt path and then buckle it. Automatic Locking Retractor (ALR) seat belt, Do not lock the seat belt. Remind all children in stow the seat belt, following the instructions 5. Tighten all of the straps as you push the child the vehicle that the seat belts are not toys and below. See the section “Installing Child Re- restraint rearward and downward into the that they should not play with them. straints Using the Vehicle Seat Belt” to check seat. Remove slack in the straps according what type of seat belt each seating position has. to the child restraint manufacturer’s WARNING! 1. Loosen the adjusters on the lower straps and instructions. on the tether strap of the child seat so that 6. Test that the child restraint is installed • Improper installation of a child restraint to you can more easily attach the hooks or tightly by pulling back and forth on the child the LATCH anchorages can lead to failure connectors to the vehicle anchorages. seat at the belt path. It should not move of the restraint. The child could be badly injured or killed. Follow the child restraint 2. Place the child seat between the lower an- more than 1 inch (25.4 mm) in any manufacturer’s directions exactly when in- chorages for that seating position. For some direction. stalling an infant or child restraint. second row seats, you may need to recline How To Stow An Unused Switchable-ALR • Child restraint anchorages are designed to the seat and / or raise the head restraint to (ALR) Seat Belt: withstand only those loads imposed by get a better fit. If the rear seat can be moved correctly-fitted child restraints. Under no When using the LATCH attaching system to forward and rearward in the vehicle, you may circumstances are they to be used for adult install a child restraint, stow all ALR seat belts wish to move it to its rear-most position to seat belts, harnesses, or for attaching other that are not being used by other occupants or make room for the child seat. You may also items or equipment to the vehicle. move the front seat forward to allow more being used to secure child restraints. An unused room for the child seat. belt could injure a child if they play with it and 97 Installing Child Restraints Using The Ve- by pulling all of the webbing out of the retractor Lap/Shoulder Belt Systems For Installing hicle Seat Belt and then letting the webbing retract back into Child Restraints In This Vehicle the retractor. If it is locked, the ALR will make a Child restraint systems are designed to be se- clicking noise while the webbing is pulled back SAFETY cured in vehicle seats by lap belts or the lap belt into the retractor. Refer to the “Automatic Lock- portion of a lap/shoulder belt. ing Mode” description in “Switchable Auto- matic Locking Retractors (ALR)” under “Occu- WARNING! pant Restraint Systems” for additional • Improper installation or failure to properly information on ALR. The cinching latch plate is secure a child restraint can lead to failure designed to hold the lap portion of the seat belt of the restraint. The child could be badly tight when webbing is pulled tight and straight injured or killed. through a child restraint’s belt path. • Follow the child restraint manufacturer’s Please see the table below and the following directions exactly when installing an infant sections for more information. or child restraint.

The seat belts in the passenger seating positions are equipped with either a Switchable Automatic Locking Retractor (ALR) Automatic Locking Retractor (ALR) or a cinch- Locations (Third Row Shown) ing latch plate or both. Both types of seat belts are designed to keep the lap portion of the seat Cinching Latchplate = CINCH ALR = Switchable Automatic Locking belt tight around the child restraint so that it is Retractor not necessary to use a locking clip. The ALR Top Tether Anchorage Symbol retractor can be “switched” into a locked mode

98 Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s weight + weight Always use the tether anchor when using the seat of the child restraint) for using the Tether Anchor belt to install a forward facing child restraint, up Weight limit of the Child Restraint with the seat belt to attach a forward facing child to the recommended weight limit of the child re- restraint? straint. Contact between the front passenger seat and the Can the rear-facing child restraint touch the back Yes child restraint is allowed, if the child restraint of the front passenger seat? manufacturer also allows contact. Can the head restraints be removed? Yes All second row head restraints are removable. In positions with cinching latch plates (CINCH), Can the buckle stalk be twisted to tighten the Yes–CINCH the buckle stalk may be twisted up to 3 full turns. seat belt against the belt path of the child re- No – ALR Do not twist the buckle stalk in a seating position straint? with an ALR retractor.

Installing A Child Restraint With A Switch- WARNING! WARNING! able Automatic Locking Retractor (ALR): • Follow the child restraint manufacturer’s • Improper installation or failure to properly Child restraint systems are designed to be se- directions exactly when installing an infant secure a child restraint can lead to failure cured in vehicle seats by lap belts or the lap belt or child restraint. of the restraint. The child could be badly portion of a lap/shoulder belt. injured or killed.

99 1. Place the child seat in the center of the 6. Try to pull the webbing out of the retractor. If Installing A Child Restraint With A Cinching seating position. For some second row seats, it is locked, you should not be able to pull Latch Plate (CINCH) — If Equipped: you may need to recline the seat and/or raise out any webbing. If the retractor is not Child restraint systems are designed to be se- the head restraint to get a better fit. If the locked, repeat step 5. SAFETY cured in vehicle seats by lap belts or the lap belt rear seat can be moved forward and rearward 7. Finally, pull up on any excess webbing to portion of a lap/shoulder belt. in the vehicle, you may wish to move it to its tighten the lap portion around the child re- rear-most position to make room for the child straint while you push the child restraint WARNING! seat. You may also move the front seat for- rearward and downward into the vehicle ward to allow more room for the child seat. seat. • Improper installation or failure to properly secure a child restraint can lead to failure 2. Pull enough of the seat belt webbing from 8. If the child restraint has a top tether strap the retractor to pass it through the belt path of the restraint. The child could be badly and the seating position has a top tether injured or killed. of the child restraint. Do not twist the belt anchorage, connect the tether strap to the webbing in the belt path. • Follow the child restraint manufacturer’s anchorage and tighten the tether strap. See directions exactly when installing an infant 3. Slide the latch plate into the buckle until you the section “Installing Child Restraints Us- or child restraint. hear a “click.” ing the Top Tether Anchorage” for directions 1. Place the child seat in the center of the 4. Pull on the webbing to make the lap portion to attach a tether anchor. seating position. For some second row seats, tight against the child seat. 9. Test that the child restraint is installed you may need to recline the seat and / or tightly by pulling back and forth on the child 5. To lock the seat belt, pull down on the raise the head restraint to get a better fit. If seat at the belt path. It should not move shoulder part of the belt until you have the rear seat can be moved forward and more than 1 inch (25.4 mm) in any pulled all the seat belt webbing out of the rearward in the vehicle, you may wish to direction. retractor. Then, allow the webbing to retract move it to its rear-most position to make back into the retractor. As the webbing re- Any seat belt system will loosen with time, so room for the child seat. You may also move tracts, you will hear a clicking sound. This check the belt occasionally, and pull it tight if the front seat forward to allow more room for means the seat belt is now in the Automatic necessary. the child seat. Locking mode. 100 2. Next, pull enough of the seat belt webbing Any seat belt system will loosen with time, so Installing Child Restraints Using The Top from the retractor to pass it through the belt check the belt occasionally, and pull it tight if Tether Anchorage path of the child restraint. Do not twist the necessary. belt webbing in the belt path. If the buckle or the cinching latch plate is too WARNING! 3. Slide the latch plate into the buckle until you close to the belt path opening of the child Do not attach a tether strap for a rear-facing hear a “click.” restraint, you may have trouble tightening the car seat to any location in front of the car 4. Finally, pull up on any excess webbing to seat belt. If this happens, disconnect the latch seat, including the seat frame or a tether tighten the lap portion around the child re- plate from the buckle and twist the short anchorage. Only attach the tether strap of a straint while you push the child restraint buckle-end belt up to three full turns to shorten rear-facing car seat to the tether anchorage rearward and downward into the vehicle it. Insert the latch plate into the buckle with the that is approved for that seating position, located behind the top of the vehicle seat. seat. release button facing out, away from the child restraint. Repeat steps 4 to 6, above, to com- See the section “Lower Anchors and Tethers 5. If the child restraint has a top tether strap plete the installation of the child restraint. for CHildren (LATCH) Restraint System” for and the seating position has a top tether the location of approved tether anchorages in anchorage, connect the tether strap to the If the belt still cannot be tightened after you your vehicle. anchorage and tighten the tether strap. See shorten the buckle, disconnect the latch plate the section “Installing Child Restraints Us- from the buckle, turn the buckle around one ing the Top Tether Anchorage” for directions half turn, and insert the latch plate into the to attach a tether anchor. buckle again. If you still cannot make the child restraint installation tight, try a different seating 6. Test that the child restraint is installed position. tightly by pulling back and forth on the child seat at the belt path. It should not move more than 1 inch (25.4 mm) in any direction.

101 1. Look behind the seating position where you 2. Route the tether strap to provide the most plan to install the child restraint to find the direct path for the strap between the anchor tether anchorage. You may need to move the and the child seat. If your vehicle is seat forward to provide better access to the equipped with adjustable rear head re- SAFETY tether anchorage. If there is no top tether straints, raise the head restraint, and where anchorage for that seating position, move possible, route the tether strap under the the child restraint to another position in the head restraint and between the two posts. If vehicle if one is available. not possible, lower the head restraint and pass the tether strap around the outboard side of the head restraint. 3. Attach the tether strap hook of the child restraint to the top tether anchorage as shown in the diagram. 4. Remove slack in the tether strap according Rear Seat Tether Strap Mounting (Second to the child restraint manufacturer’s Row 60/40) instructions.

Seat Track Release Lever

102 WARNING! SAFETY TIPS Exhaust Gas

• An incorrectly anchored tether strap could WARNING! lead to increased head motion and pos- Transporting Passengers sible injury to the child. Use only the an- Exhaust gases can injure or kill. They contain NEVER TRANSPORT PASSENGERS IN THE carbon monoxide (CO), which is colorless chorage position directly behind the child CARGO AREA. seat to secure a child restraint top tether and odorless. Breathing it can make you unconscious and can eventually poison you. strap. WARNING! To avoid breathing (CO), follow these safety • If your vehicle is equipped with a split rear tips: seat, make sure the tether strap does not • Do not leave children or animals inside • Do not run the engine in a closed garage or slip into the opening between the seat- parked vehicles in hot weather. Interior in confined areas any longer than needed backs as you remove slack in the strap. heat build-up may cause serious injury or to move your vehicle in or out of the area. death. Transporting Pets • If you are required to drive with the trunk/ • It is extremely dangerous to ride in a cargo liftgate/rear doors open, make sure that all Air Bags deploying in the front seat could harm area, inside or outside of a vehicle. In a windows are closed and the climate control your pet. An unrestrained pet will be thrown collision, people riding in these areas are BLOWER switch is set at high speed. DO about and possibly injured, or injure a passen- more likely to be seriously injured or killed. NOT use the recirculation mode. ger during panic braking or in a collision. • Do not allow people to ride in any area of • If it is necessary to sit in a parked vehicle your vehicle that is not equipped with seats with the engine running, adjust your heat- Pets should be restrained in the rear seat in pet and seat belts. ing or cooling controls to force outside air harnesses or pet carriers that are secured by • Be sure everyone in your vehicle is in a seat into the vehicle. Set the blower at high seat belts. and using a seat belt properly. speed.

103 The best protection against carbon monoxide Safety Checks You Should Make Inside stay on until the fault is removed. If the light entry into the vehicle body is a properly main- The Vehicle comes on intermittently or remains on while tained engine exhaust system. driving, have your authorized dealer service the Seat Belts vehicle immediately. Refer to “Occupant Re-

SAFETY Whenever a change is noticed in the sound of straint Systems” in “Safety” for further informa- the exhaust system, when exhaust fumes can be Inspect the seat belt system periodically, check- tion. detected inside the vehicle, or when the under- ing for cuts, frays, and loose parts. Damaged side or rear of the vehicle is damaged, have a parts must be replaced immediately. Do not Defroster disassemble or modify the system. competent mechanic inspect the complete ex- Check operation by selecting the defrost mode haust system and adjacent body areas for bro- Front seat belt assemblies must be replaced and place the blower control on high speed. You after a collision. Rear seat belt assemblies must ken, damaged, deteriorated, or mispositioned should be able to feel the air directed against be replaced after a collision if they have been parts. Open seams or loose connections could the windshield. See your authorized dealer for damaged (i.e., bent retractor, torn webbing, permit exhaust fumes to seep into the passen- service if your defroster is inoperable. ger compartment. In addition, inspect the ex- etc.). If there is any question regarding seat belt haust system each time the vehicle is raised for or retractor condition, replace the seat belt. Floor Mat Safety Information lubrication or oil change. Replace as required. Air Bag Warning Light Always use floor mats designed to fit your vehicle. Only use a floor mat that does not inter- The Air Bag warning light will turn on for fere with the operation of the accelerator, brake four to eight seconds as a bulb check when the or clutch pedals. Only use a floor mat that is ignition switch is first turned to ON/RUN. If the securely attached using the floor mat fasteners light is either not on during starting, stays on, or so it cannot slip out of position and interfere turns on while driving, have the system in- with the accelerator, brake or clutch pedals or spected at your authorized dealer as soon as impair safe operation of your vehicle in other possible. After the bulb check, this light will ways. illuminate with a single chime when a fault with the Air Bag System has been detected. It will

104 WARNING! WARNING! WARNING!

An improperly attached, damaged, folded, or mat for the specific make, model, and year could change the position of the floor mat stacked floor mat, or damaged floor mat of your vehicle. and may cause interference with the accel- fasteners may cause your floor mat to inter- • ONLY use the driver’s side floor mat on the erator, brake, or clutch pedals. fere with the accelerator, brake, or clutch driver’s side floor area. To check for inter- • If the vehicle carpet has been removed and pedals and cause a loss of vehicle control. To ference, with the vehicle properly parked re-installed, always properly attach carpet prevent SERIOUS INJURY or DEATH: with the engine off, fully depress the accel- to the floor and check the floor mat fasten- • ALWAYS securely attach your floor erator, the brake, and the clutch pedal (if ers are secure to the vehicle carpet. Fully mat using the floor mat fasteners. DO NOT present) to check for interference. If your depress each pedal to check for interfer- install your floor mat upside down or turn floor mat interferes with the operation of ence with the accelerator, brake, or clutch your floor mat over. Lightly pull to confirm any pedal, or is not secure to the floor, pedals then re-install the floor mats. mat is secured using the floor mat fasten- remove the floor mat from the vehicle and • It is recommended to only use mild soap ers on a regular basis. place the floor mat in your trunk. and water to clean your floor mats. After • ALWAYS REMOVE THE EXISTING FLOOR • ONLY use the passenger’s side floor mat on cleaning, always check your floor mat has MAT FROM THE VEHICLE before the passenger’s side floor area. been properly installed and is secured to • ALWAYS make sure objects cannot fall or installing any other floor mat. NEVER in- your vehicle using the floor mat fasteners slide into the driver’s side floor area when stall or stack an additional floor mat on top by lightly pulling mat. the vehicle is moving. Objects can become of an existing floor mat. • ONLY install floor mats designed to fit your trapped under accelerator, brake, or clutch vehicle. NEVER install a floor mat that pedals and could cause a loss of vehicle cannot be properly attached and secured control. • NEVER place any objects under the floor to your vehicle. If a floor mat needs to be mat (e.g., towels, keys, etc.). These objects replaced, only use a FCA approved floor

105 Periodic Safety Checks You Should Make Lights Fluid Leaks Outside The Vehicle Have someone observe the operation of brake Check area under the vehicle after overnight Tires lights and exterior lights while you work the parking for fuel, coolant, oil, or other fluid leaks.

SAFETY controls. Check turn signal and high beam indi- Also, if gasoline fumes are detected or if fuel, or Examine tires for excessive tread wear and un- cator lights on the instrument panel. brake fluid leaks are suspected. The cause even wear patterns. Check for stones, nails, should be located and corrected immediately. glass, or other objects lodged in the tread or Door Latches sidewall. Inspect the tread for cuts and cracks. Check for proper closing, latching, and locking. Inspect sidewalls for cuts, cracks, and bulges. Check the wheel nuts for tightness. Check the tires (including spare) for proper cold inflation pressure.

106 STARTING AND OPERATING

STARTING AND OPERATING ENGINE BREAK-IN RECOMMENDATIONS — GASO- To Resume Speed ...... 110 Materials Added To Fuel ...... 113 LINE ENGINE...... 108 To Deactivate ...... 110 TRAILER TOWING ...... 114 SPEED CONTROL — IF EQUIPPED ...... 108 PARKSENSE REAR PARK ASSIST...... 110 Trailer Towing Weights (Maximum Trailer Weight Ratings) ...... 114 To Activate...... 109 PARKVIEW REAR BACK UP CAMERA — IF To Set A Desired Speed ...... 109 EQUIPPED ...... 111 RECREATIONAL TOWING (BEHIND MOTORHOME, To Vary The Speed Setting ...... 109 ETC.)...... 115 REFUELING THE VEHICLE ...... 113 To Accelerate For Passing ...... 110 Towing This Vehicle Behind Another Loose Fuel Filler Cap Message ...... 113 Vehicle ...... 115

107 ENGINE BREAK-IN CAUTION! RECOMMENDATIONS — GASOLINE Never use Non-Detergent Oil or Straight Min- ENGINE eral Oil in the engine or damage may result.

A long break-in period is not required for the NOTE: engine and drivetrain (transmission and axle) in A new engine may consume some oil during its your vehicle. first few thousand miles (kilometers) of opera- Drive moderately during the first 300 miles tion. This should be considered a normal part of (500 km). After the initial 60 miles (100 km), the break-in and not interpreted as a problem. speeds up to 50 or 55 mph (80 or 90 km/h) are Please check your oil level with the engine oil desirable. indicator often during the break in period. Add oil as required. While cruising, brief full-throttle acceleration

STARTING AND OPERATING within the limits of local traffic laws contributes SPEED CONTROL — IF EQUIPPED Speed Control Switches to a good break-in. Wide-open throttle accelera- 1 — Cancel tion in low gear can be detrimental and should When engaged, the Speed Control takes over 2 — Push On/Off Push be avoided. accelerator operations at speeds greater than 3 — Push Resume/Accel 25 mph (40 km/h). The engine oil installed in the engine at the 4 — Push Set/Decel factory is a high-quality energy conserving type The Speed Control buttons are located on the lubricant. Oil changes should be consistent with right side of the steering wheel. anticipated climate conditions under which vehicle operations will occur. For the recommended viscosity and quality grades, refer to “Fluids And Lubricants” in “Technical Specifications”.

108 NOTE: To Set A Desired Speed • Pushing the RES (+) button once will result in In order to ensure proper operation, the Speed a 1 mph increase in set speed. Each subse- Turn the Speed Control on. When the vehicle Control System has been designed to shut down quent tap of the button results in an increase has reached the desired speed, push the SET (-) if multiple Speed Control functions are operated of 1 mph. button and release. Release the accelerator and at the same time. If this occurs, the Speed • If the button is continually pushed, the set the vehicle will operate at the selected speed. Control System can be reactivated by pushing speed will continue to increase until the but- the Speed Control ON/OFF button and resetting NOTE: ton is released, then the new set speed will be the desired vehicle set speed. The vehicle should be traveling at a steady established. To Activate speed and on level ground before pushing the Metric Speed (km/h) SET (-) button. • Pushing the RES (+) button once will result in Push the ON/OFF button. The Cruise Indicator To Vary The Speed Setting a 1 km/h increase in set speed. Each subse- Light in the instrument cluster display will illu- quent tap of the button results in an increase minate. To turn the system off, push the ON/ To Increase Speed of 1 km/h. OFF button a second time. The Cruise Indicator When the Speed Control is set, you can increase • If the button is continually pushed, the set Light will turn off. The system should be turned speed by pushing the RES (+) button. speed will continue to increase until the but- off when not in use. ton is released, then the new set speed will be The driver’s preferred units can be selected established. WARNING! through the instrument panel settings if equipped. Refer to “Getting To Know Your Instru- To Decrease Speed Leaving the Speed Control system on when ment Panel” in the Owner’s Manual for more When the Speed Control is set, you can de- not in use is dangerous. You could acciden- information. The speed decrement shown is decrease speed by pushing the SET (-) button. tally set the system or cause it to go faster pendant on the chosen speed unit of U.S. (mph) than you want. You could lose control and or Metric (km/h): have an accident. Always leave the system off when you are not using it. U.S. Speed (mph)

109 The driver’s preferred units can be selected To Accelerate For Passing To Resume Speed through the instrument panel settings if Press the accelerator as you would normally. To resume a previously set speed, push the RES equipped. Refer to “Getting To Know Your In- When the pedal is released, the vehicle will (+) button and release. Resume can be used at strument Panel” in the Owner’s Manual for return to the set speed. any speed above 20 mph (32 km/h). more information. The speed increment shown is dependent on the selected speed unit of U.S. Using Speed Control On Hills To Deactivate (mph) or Metric (km/h): The transmission may downshift on hills to A soft tap on the brake pedal, pushing the U.S. Speed (mph) maintain the vehicle set speed. CANCEL button, or normal brake pressure while slowing the vehicle will deactivate the Speed • Pushing the SET (-) button once will result in NOTE: a 1 mph decrease in set speed. Each subse- Control without erasing the set speed from The Speed Control system maintains speed up quent tap of the button results in a decrease memory. and down hills. A slight speed change on mod- of 1 mph. erate hills is normal. Pushing the ON/OFF button or turning the igni- • If the button is continually pushed, the set tion switch OFF erases the set speed from STARTING AND OPERATING On steep hills, a greater speed loss or gain may speed will continue to decrease until the but- memory. ton is released, then the new set speed will be occur so it may be preferable to drive without established. Speed Control. PARKSENSE REAR PARK ASSIST Metric Speed (km/h) WARNING! The ParkSense Park Assist system provides vi- • Pushing the SET (-) button once will result in sual and audible indications of the distance Speed Control can be dangerous where the a 1 km/h decrease in set speed. Each subse- system cannot maintain a constant speed. between the rear bumper and a detected ob- quent tap of the button results in a decrease Your vehicle could go too fast for the condi- stacle when backing up, e.g. during a parking of 1 km/h. tions, and you could lose control and have an maneuver. • If the button is continually pushed, the set accident. Do not use Speed Control in heavy ParkSense can be enabled and disabled with speed will continue to decrease until the but- traffic or on roads that are winding, icy, snow- the ParkSense switch, located on the switch ton is released, then the new set speed will be covered or slippery. established. panel below the Uconnect display. 110 NOTE: • As the vehicle moves closer to the obstacle, The camera image is also available in the rear- ParkSense will retain the last system state (en- the instrument cluster display will show fewer view mirror if the touchscreen display is unavail- abled or disabled) from the last ignition cycle arcs and the sound tone will change from able. when the ignition is changed to the ON/RUN slow, to fast, to continuous. If your vehicle is equipped with the Camera position. Refer to your Owner's Manual for further infor- Delay feature and it is turned on, the rear cam- ParkSense can be active only when the gear mation. era image will be displayed for up to 10 seconds selector is in REVERSE. If ParkSense is enabled when the vehicle is shifted out of REVERSE at this gear selector position, the system will PARKVIEW REAR BACK UP CAMERA unless the forward vehicle speed exceeds remain active until the vehicle speed is in- — IF EQUIPPED 8 mph (13 km/h), the transmission is shifted creased to approximately 7 mph (11 km/h) or into PARK, the X button on the camera display above. The system will become active again if Your vehicle may be equipped with the screen is pressed, or the vehicle's ignition is the vehicle speed is decreased to speeds less ParkView Rear Back Up Camera that allows you cycled to the OFF position. than approximately 6 mph (9 km/h). to see an on-screen image of the rear surround- Static grid lines will illustrate the width of the ings of your vehicle whenever the gear selector The four ParkSense sensors, located in the rear vehicle while a dashed center-line will indicate is put into REVERSE. The image will be dis- fascia/bumper, monitor the area behind the ve- the center of the vehicle to assist with parking or played in the touchscreen display along with a hicle that is within the sensors’ field of view. aligning to a hitch/receiver. The static grid lines caution note to “CHECK ENTIRE SURROUND- will show separate zones that will help indicate NOTE: INGS” across the top of the screen. After five the distance to the rear of the vehicle. • The sensors can detect obstacles from ap- seconds this note will disappear. The ParkView proximately 12 inches (30 cm) up to camera is located on the rear of the vehicle NOTE: 79 inches (200 cm) from the rear bumper above the rear license plate. The ParkView Rear Back Up Camera has programmable modes of operation that may be while the vehicle is in REVERSE, a warning When the vehicle is shifted out of REVERSE, selected through the Uconnect System. Refer to will display in the instrument cluster display the rear camera mode is exited and the last “Uconnect Settings” in “Multimedia” in your only when “Sound and Display” is selected selected touchscreen appears again. from the Uconnect System. Owner’s Manual for further information

111 Different colored zones indicate the distance to the rear of the vehicle. The following table shows the approximate distances for each zone: Zone Distance To The Rear Of The Vehicle Red 0-1ft(0-30cm) Yellow 1ft-3ft(30cm-1m) Green 3 ft or greater (1 m or greater)

WARNING! CAUTION! NOTE: If snow, ice, mud, or any foreign substance Drivers must be careful when backing up • To avoid vehicle damage, ParkView should builds up on the camera lens, clean the lens, even when using the ParkView Rear Back Up only be used as a parking aid. The rinse with water, and dry with a soft cloth. Do STARTING AND OPERATING Camera. Always check carefully behind your ParkView camera is unable to view every not cover the lens. vehicle, and be sure to check for pedestrians, obstacle or object in your drive path. animals, other vehicles, obstructions, or • To avoid vehicle damage, the vehicle must blind spots before backing up. You are re- be driven slowly when using ParkView to be sponsible for the safety of your surroundings able to stop in time when an obstacle is and must continue to pay attention while seen. It is recommended that the driver backing up. Failure to do so can result in look frequently over his/her shoulder when serious injury or death. using ParkView.

112 REFUELING THE VEHICLE CAUTION! Loose Fuel Filler Cap Message If the vehicle diagnostic system determines that The gas cap is located behind the fuel filler door • Damage to the fuel system or emissions on the left side of the vehicle. If the gas cap is the fuel filler cap is loose, improperly installed, or control system could result from using an damaged, a ”gASCAP” message will display in the lost or damaged, be sure the replacement cap improper fuel tank filler tube cap. odometer or a “Check Gascap” message will dis- has been designed for use with this vehicle. • A poorly fitting fuel filler cap could let play in the instrument cluster. If this occurs, impurities into the fuel system. NOTE: tighten the fuel filler cap properly and press the • A poorly fitting fuel filler cap may cause When removing the fuel filler cap, lay the cap Trip Odometer button to turn off the message. If the “Malfunction Indicator Light (MIL)” to tether in the hook, located on the fuel filler door the problem continues, the message will appear turn on. the next time the vehicle is started. reinforcement. • To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. When A loose, improperly installed, or damaged fuel WARNING! the fuel nozzle “clicks” or shuts off, the filler cap may also turn on the MIL. fuel tank is full. • Never have any smoking materials lit in or Materials Added To Fuel near the vehicle when the gas cap is re- NOTE: moved or the tank is being filled. Designated TOP TIER • Never add fuel to the vehicle when the • When the fuel nozzle “clicks” or shuts off, the Detergent Gasoline con- engine is running. fuel tank is full. tains a higher level of • A fire may result if gasoline is pumped into • Tighten the gas cap until you hear a “clicking” detergents to further a portable container that is inside of a sound. This is an indication that the gas cap is aide in minimizing en- vehicle. You could be burned. Always place tightened properly. The MIL in the instrument gine and fuel system de- gas containers on the ground while filling. cluster may turn on if the gas cap is not posits. When available, • Failure to follow this warning may result in secured properly. Make sure that the gas cap the usage of Top Tier De- serious injury or death. is tightened each time the vehicle is refueled. tergent gasoline is recommended. Visit www.toptiergas.com for a list of TOP TIER De- tergent Gasoline Retailers.

113 Indiscriminate use of fuel system cleaning agents should be avoided. Many of these materials intended for gum and varnish removal may contain active solvents or similar ingredients. These can harm fuel system gasket and dia- phragm materials. TRAILER TOWING Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain: GCWR (Gross Combined Wt. Rat- Engine/Transmission Frontal Area Max. GTW (Gross Trailer Wt.) Max. Tongue Wt. ing) STARTING AND OPERATING 1,000 lbs (453 kg) which includes 2.4L/Automatic 6,000 lbs (2,721 kg) 22 sq ft (2.0 sq m) 100 lbs (45 kg) up to 5 persons & Luggage 2,500 lbs (1,133 kg) which in- 7,300 lbs (3,311 kg) 32 sq ft (3.0 sq m) 200 lbs (90 kg) cludes 1 to 2 persons & Luggage 2,000 lbs (907 kg) which includes 7,300 lbs (3,311 kg) 32 sq ft (3.0 sq m) 150 lbs (68 kg) 3.6L/Automatic 3 to 4 persons & Luggage 100 lbs (45 kg) 1,500 lbs (680 kg) which includes 7,300 lbs (3,311 kg) 32 sq ft (3.0 sq m) * Except for AWD 5 to 7 persons & Luggage models

114 NOTE: • * For All Wheel Drive (AWD) models carrying five to seven persons and luggage will exceed • The trailer tongue weight must be considered the rear Gross Axle Weight Rating (GAWR) and as part of the combined weight of occupants therefore should not be attempted. and cargo, and should never exceed the weight referenced on the Tire and Loading Information placard. Refer to “Tires” in “Ser- vicing And Maintenance” for further information. RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Wheel OFF the Ground FWD Models AWD Models Flat Tow NONE NOT ALLOWED NOT ALLOWED Front OK NOT ALLOWED Dolly Tow Rear NOT ALLOWED NOT ALLOWED On Trailer ALL OK OK NOTE: When towing your vehicle, always follow applicable state and provincial laws. Contact state and provincial Highway Safety offices for additional details.

Recreational Towing 1. Properly secure the dolly to the tow vehicle, 4. Properly secure the front wheels to the dolly, following the dolly manufacturer's following the dolly manufacturer's Front-Wheel Drive (FWD) Models instructions. instructions. Recreational towing is allowed ONLY if the front 2. Drive the front wheels onto the tow dolly. 5. Release the parking brake. wheels are OFF the ground. This may be accom- plished using a tow dolly or vehicle trailer. If 3. Firmly apply the parking brake. Place the using a tow dolly, follow this procedure: transmission in PARK. 115 CAUTION! CAUTION!

• DO NOT flat tow this vehicle. Damage to Towing this vehicle with ANY of its wheels on the drivetrain will result. If this vehicle the ground can cause severe transmission requires towing, make sure the drive and/or power transfer unit damage. Damage wheels are OFF the ground. from improper towing is not covered under • Towing this vehicle in violation of the above the New Vehicle Limited Warranty. requirements can cause severe transmission damage. Damage from improper towing is not covered under the New Vehicle Limited Warranty.

All-Wheel Drive (AWD) Models Recreational towing (with all four wheels on the STARTING AND OPERATING ground, or using a towing dolly) is NOT AL- LOWED. The only acceptable method for towing this vehicle (behind another vehicle) is on a vehicle trailer with all four wheels OFF the ground.

116 IN CASE OF EMERGENCY

IN CASE OF EMERGENCY JACKING AND TIRE CHANGING...... 118 FUSES ...... 126 GEAR SELECTOR OVERRIDE ...... 133 Jack Location ...... 118 Interior Fuses ...... 126 FREEING A STUCK VEHICLE ...... 133 Spare Tire Location And Removal .....118 Underhood Fuses (Power Distribution TOWING A DISABLED VEHICLE ...... 135 Preparations For Jacking...... 119 Center) ...... 128 Jacking Instructions ...... 120 JUMP STARTING ...... 130 All-Wheel Drive (AWD) Models ...... 136 Road Tire Installation...... 123 Preparations For Jump Start...... 130 Front-Wheel Drive (FWD) Models ...... 136 Spare Tire Stowage ...... 124 Jump Starting Procedure ...... 131 ENHANCED ACCIDENT RESPONSE SYSTEM BULB REPLACEMENT ...... 124 IF YOUR ENGINE OVERHEATS ...... 132 (EARS) ...... 136 Replacement Bulbs ...... 124 2.4L Engine — If Equipped...... 133 EVENT DATA RECORDER (EDR) ...... 136

117 JACKING AND TIRE CHANGING Jack Location Spare Tire Removal The jack and jack-handle are stowed under- NOTE: WARNING! neath a cover in the rear storage bin in the cargo On seven-passenger models, fold the third-row area. passenger seats flat. This will provide more space • Do not attempt to change a tire on the side when accessing the jacking tools and when oper- of the vehicle close to moving traffic. Pull ating the winch mechanism. far enough off the road to avoid the danger 1. Remove the jack-handle components 1, of being hit when operating the jack or 2 and 3 from storage and assemble them. changing the wheel. • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never Jack/Tools Location put any part of your body under a vehicle IN CASE OF EMERGENCY that is on a jack. If you need to get under a 1 — Tire Changing Tools raised vehicle, take it to a service center 2 — Spare Tire Drive Nut (Beneath Jack) where it can be raised on a lift. 3 — Jack • Never start or run the engine while the vehicle is on a jack. • The jack is designed to be used as a tool for Spare Tire Location And Removal changing tires only. The jack should not be The spare tire is stowed underneath the rear of used to lift the vehicle for service pur- the vehicle and is held in place by means of a poses. The vehicle should be jacked on a cable winch mechanism. firm level surface only. Avoid ice or slippery Jack-Handle/Components Assembled areas. 1 — Jack Handle 2 — Component 2 3 — Component 3

118 NOTE: CAUTION! 4. Place the gear selector in PARK. 5. Turn OFF the ignition. Assemble components 2 and 3 by seating of air wrench or power tool may damage the the small ball at the end of component winch. 6. Block both the front and rear of the wheel 2 in the small hole at the end of compo- diagonally opposite the jacking position. For 3. Pull the spare tire out from underneath the nent 3. This will lock these components example, if the right front wheel is being vehicle and raise it upright so the tire's tread together. Assemble components 1 and 2 so changed, block the left rear wheel. that the wheel nut socket at the end of is on the ground. component 1 faces upward when seated 4. Tilt the retainer at the end of the winch cable on component 2. This will make it easier to and remove it from the center of the wheel. rotate the assembly when operating the winch mechanism. Preparations For Jacking 2. Fit the assembled jack-handle over the 1. Park the vehicle on a firm, level surface as winch drive nut located in the jack storage far from the edge of the roadway as possible. area. Rotate the jack-handle assembly coun- Avoid icy or slippery areas. terclockwise until the spare tire is on the ground with enough cable slack to allow you WARNING! to pull the spare tire out from underneath the Do not attempt to change a tire on the side of vehicle. Wheel Blocked the vehicle close to moving traffic, pull far enough off the road to avoid being hit when NOTE: CAUTION! operating the jack or changing the wheel. Passengers should not remain in the vehicle The winch mechanism is designed for use 2. Turn on the Hazard Warning flashers. when the vehicle is being jacked. with the jack wrench extension tool only. Use 3. Apply the parking brake.

119 Jacking Instructions WARNING! CAUTION! WARNING! • If working on or near a roadway, be ex- Do not attempt to raise the vehicle by jacking tremely careful of motor traffic. on locations other than those indicated in the Carefully follow these tire changing warnings • To assure that spare tires, flat or inflated, Jacking Instructions for this vehicle. to help prevent personal injury or damage to are securely stowed, spares must be your vehicle: stowed with the valve stem facing the • Always park on a firm, level surface as far ground. from the edge of the roadway as possible before raising the vehicle. • Turn on the Hazard Warning flasher. • Block the wheel diagonally opposite the wheel to be raised.

IN CASE OF EMERGENCY • Set the parking brake firmly and set the transmission in PARK. • Never start or run the engine with the vehicle on a jack. • Do not let anyone sit in the vehicle when it Jack Lifting Locations is on a jack. 1. Remove the spare tire, jack, and jack-handle • Do not get under the vehicle when it is on a jack. If you need to get under a raised from stowage. vehicle, take it to a service center where it 2. Loosen, but do not remove, the wheel nuts can be raised on a lift. on the wheel with the flat tire. Turn the wheel • Only use the jack in the positions indicated nuts counterclockwise one turn while the Jack Warning Label and for lifting this vehicle during a tire wheel is still on the ground. change.

120 3. Place the jack in the notches underneath the WARNING! lift area that is closest to the flat tire. Center the jack saddle between the drain flute for- Raising the vehicle higher than necessary mations on the sill flange. Turn the jack can make the vehicle less stable. It could slip screw clockwise to firmly engage the jack off the jack and hurt someone near it. Raise saddle with the lift area of the sill flange. the vehicle only enough to remove the tire.

5. Remove the wheel nuts. For vehicles so equipped, remove the wheel cover from the wheel by hand. Do not pry the wheel cover off. Then, pull the wheel off the hub.

WARNING!

To avoid possible personal injury, handle the Rear Jacking Location wheel covers with care to avoid contact with 4. Raise the vehicle by turning the jack screw any sharp edges. clockwise with the jack handle. Raise the 6. Install the spare tire. vehicle until the tire just clears the road surface and enough clearance is obtained to install the spare tire. Minimum tire lift pro- Front Jacking Location vides maximum stability.

121 CAUTION! NOTE: star pattern until each nut has been tightened twice. For the correct lug nut torque, • For vehicles so equipped, do not attempt refer to “Torque Specifications” in “Techni- Be sure to mount the spare tire with the valve to install a center cap or wheel cover on cal Specifications”. If in doubt about the stem facing outward. The vehicle could be the compact spare. damaged if the spare tire is mounted incor- correct tightness, have them checked with a rectly. • Refer to “Compact Spare Tire” and to torque wrench by your authorized dealer or “Limited-Use Spare” under “Tires” in service station. “Servicing And Maintenance” for additional warnings, cautions, and informa- 10. Lower the jack to its fully closed position. tion about the spare tire, its use, and 11. Place the deflated (flat) tire in the cargo operation. area. Do not stow the deflated tire in the 7. Install the wheel nuts with the cone-shaped spare tire stowage location. Have the deflated (flat) tire repaired or replaced as

IN CASE OF EMERGENCY end of the nut toward the wheel. Lightly tighten the wheel nuts. soon as possible. 12. To stow the winch cable and retainer, fit the WARNING! assembled jack-handle over the winch drive nut. Rotate the jack-handle assembly To avoid the risk of forcing the vehicle off the clockwise until you hear the winch mecha- jack, do not tighten the wheel nuts fully until nism click three times. It cannot be over the vehicle has been lowered. Failure to fol- tightened. low this warning may result in serious injury. Mounting Spare Tire 13. Stow the jack-handle and jack. Remove the 8. Lower the vehicle by turning the jack screw wheel blocks from the vehicle and release counterclockwise with the jack handle. the park brake. 9. Finish tightening the lug nuts. Push down on 14. Check the tire pressure as soon as possible. the wrench while at the end of the handle for Adjust the tire pressure as required. increased leverage. Tighten the lug nuts in a 122 Road Tire Installation WARNING! 2. Install the remaining lug nuts with the cone shaped end of the nut toward the wheel. Vehicles Equipped With Wheel Covers To avoid the risk of forcing the vehicle off the Lightly tighten the lug nuts. 1. Mount the road tire on the axle. jack, do not tighten the wheel nuts fully until the vehicle has been lowered. Failure to fol- 2. To ease the installation process for steel WARNING! low this warning may result in serious injury. wheels with wheel covers, install two lug To avoid the risk of forcing the vehicle off the nuts on the mounting studs which are on 5. Lower the vehicle to the ground by turning jack, do not tighten the wheel nuts fully until each side of the valve stem. Install the lug the jack handle counterclockwise. the vehicle has been lowered. Failure to fol- nuts with the cone shaped end of the nut low this warning may result in serious injury. 6. Finish tightening the lug nuts. Push down on toward the wheel. Lightly tighten the lug the wrench while at the end of the handle for nuts. 3. Lower the vehicle to the ground by turning increased leverage. Tighten the lug nuts in a the jack handle counterclockwise. star pattern until each nut has been tight- WARNING! 4. Finish tightening the lug nuts. Push down on ened twice. For the correct lug nut torque, the wrench while at the end of the handle for refer to “Torque Specifications” in “Techni- To avoid the risk of forcing the vehicle off the increased leverage. Tighten the lug nuts in a jack, do not tighten the wheel nuts fully until cal Specifications”. If in doubt about the star pattern until each nut has been tight- the vehicle has been lowered. Failure to fol- correct tightness, have them checked with a ened twice. For proper lug nut torque, refer low this warning may result in serious injury. torque wrench by your authorized dealer or to “Torque Specifications” in “Technical service station. 3. Align the valve notch in the wheel cover with Specifications”. If in doubt about the correct the valve stem on the wheel. Install the cover 7. After 25 miles (40 km), check the lug nut tightness, have them checked with a torque by hand, snapping the cover over the two lug torque with a torque wrench to ensure that wrench by your authorized dealer or service nuts. Do not use a hammer or excessive force all lug nuts are properly seated against the station. wheel. to install the cover. 5. After 25 miles (40 km), check the lug nut 4. Install the remaining lug nuts with the cone Vehicles Without Wheel Covers torque with a torque wrench to ensure that shaped end of the nut toward the wheel. all lug nuts are properly seated against the Lightly tighten the lug nuts. 1. Mount the road tire on the axle. wheel. 123 Spare Tire Stowage 3. Fit the assembled jack-handle over the winch drive nut. Rotate the jack-handle as- NOTE: sembly clockwise to raise the spare tire into Refer to “Spare Tire Location And Removal” for the storage area. Continue to rotate the jack- information on assembling the winch tools. handle assembly until you hear the winch 1. Place the spare tire near to the winch cable. mechanism click three times. It cannot be Hold the spare upright so that the tire's tread over tightened. Push against the tire several is on the ground and the valve stem is at the times to be sure it is held securely in place. top of the wheel facing away from the rear of the vehicle. 2. Tilt the retainer at the end of the winch cable and drop it through the center of the wheel. Then place the spare tire with the cable and IN CASE OF EMERGENCY retainer underneath the vehicle. BULB REPLACEMENT Replacement Bulbs Interior Bulbs Bulb Number Courtesy/Reading Lamps (Incandescent) 578 Courtesy/Reading Lamps (Optional LED) LED (Serviced at authorized dealer) Glove Compartment Lamp 194 Cargo Lamp 579 Optional Door Map Pocket/Cupholder LED (Serviced at authorized dealer) For lighted switches, see your authorized dealer for replacement instructions.

124 Exterior Bulbs Bulb Number Low Beam Headlamp 9006 High Beam Headlamp 9005 Front Park/Turn Signal 3757AK Side Marker Lamp 168 Front Fog Lamp PSX24W or 2504 Center High Mounted Stop Lamp (CHMSL) LED (Serviced at authorized dealer) License Lamp 168

Exterior Bulbs – Rear (LED Version) Bulb Number Rear Tail/Stop Lamp LED (Serviced at authorized dealer) Rear Tail (Liftgate) Lamp LED (Serviced at authorized dealer) Rear Turn Signal Lamp WY21W or 7440A Backup Lamp W21W or 7440

Exterior Bulbs – Rear (Bulb Version) Bulb Number Rear Tail/Stop/Turn Signal Lamp P27/7W or 3157 Rear Tail (Liftgate) Lamp P27/7W or 3157 Backup Lamp P27/7W or 3157

125 FUSES WARNING! WARNING! Do not place a fuse inside a circuit breaker • If the replaced fuse blows again, contact WARNING! cavity or vice versa. Failure to use proper an authorized dealer. • If a general protection fuse for safety sys- • When replacing a blown fuse, always use fuses may result in serious personal injury, tems (air bag system, braking system), an appropriate replacement fuse with the fire and/or property damage. power unit systems (engine system, trans- same amp rating as the original fuse. • Before replacing a fuse, make sure that the mission system) or steering system blows, Never replace a fuse with another fuse of ignition is off and that all the other services contact an authorized dealer. higher amp rating. Never replace a blown are switched off and/or disengaged. fuse with metal wires or any other material.

Interior Fuses

IN CASE OF EMERGENCY The interior fuse panel is located on the passenger side under the instrument panel. Cavity Cartridge Fuse Mini-Fuse Description F100 30 Amp Pink – 110V AC Inverter – If Equipped F101 – 10 Amp Red Interior Lights F102 – 20 Amp Yellow Cigar Lighter in Instrument Panel/Left Rear Power Outlet F103 – 20 Amp Yellow Power Outlet in Console Bin/Power Outlet in Rear of Console F105 – 20 Amp Yellow Heated Seats – If Equipped F106 – 20 Amp Yellow Rear Power Outlet F107 – 10 Amp Red Rear Camera – If Equipped F108 – 15 Amp Blue Instrument Panel F109 – 10 Amp Red Climate Control/HVAC F110 – 10 Amp Red Occupant Restraint Controller

126 Cavity Cartridge Fuse Mini-Fuse Description F112 – 10 Amp Red Spare F114 – 20 Amp Yellow Rear HVAC Blower/Motor F115 – 20 Amp Yellow Rear Wiper Motor F116 30 Amp Pink – Rear Defroster (EBL) F117 – 10 Amp Red Heated Mirrors F118 – 10 Amp Red Occupant Restraint Controller F119 – 10 Amp Red Steering Column Control Module F120 – 10 Amp Red All Wheel Drive – If Equipped F121 – 15 Amp Blue Wireless Ignition Node F122 – 25 Amp Clear Driver Door Module F123 – 25 Amp Clear Passenger Door Module F124 – 10 Amp Red Mirrors F125 – 10 Amp Red Steering Column Control Module F126 – 25 Amp Clear Audio Amplifier F127 – 20 Amp Yellow Trailer Tow – If Equipped F128 – 15 Amp Blue Radio F129 – 15 Amp Blue Video/DVD – If Equipped F130 – 15 Amp Blue Climate Control/Instrument Panel F131 – 10 Amp Red Passenger Assistance/Hands Free System – If Equipped F132 – 10 Amp Red Tire Pressure Module F133 – 10 Amp Red Cyber Security Gateway

127 Underhood Fuses (Power Distribution Center) The power distribution center is located in the engine compartment. Cavity Cartridge Fuse Mini-Fuse Description F101 60 Amp Yellow – Interior Power Distribution Center Rail F102 60 Amp Yellow – Interior Power Distribution Center Rail F103 60 Amp Yellow – Interior Power Distribution Center Rail F105 60 Amp Yellow – Interior Power Distribution Center Rail Ignition Run Relay Interior Power Distribution Center Rail Run/Accessory Re- F106 60 Amp Yellow – lays F139 40 Amp Green – Climate Control System Blower F140 30 Amp Pink – Power Locks F141 40 Amp Green – Anti-Lock Brake System IN CASE OF EMERGENCY F142 40 Amp Green – Glow Plugs – If Equipped F143 40 Amp Green – Exterior Lights 1 F144 40 Amp Green – Exterior Lights 2 F145 30 Amp Pink – To Body Computer – Lamp F146 30 Amp Pink – Spare F147 30 Amp Pink – Spare F148 40 Amp Green – Radiator Fan Motor F149 30 Amp Pink – Starter Solenoid F150 – 25 Amp Clear Powertrain Control Modules F151 30 Amp Pink – Headlamp Washer Motor – If Equipped F152 – 25 Amp Clear Diesel Fuel Heater – If Equipped F153 – 20 Amp Yellow Fuel Pump

128 Cavity Cartridge Fuse Mini-Fuse Description F156 – 10 Amp Red Brake/Electronic Stability Control Module F157 – 10 Amp Red Power Transfer Unit Module – If Equipped F158 – 10 Amp Red Active Hood Module – If Equipped F159 – 10 Amp Red Spare F160 – 20 Amp Yellow Interior Lights F161 – 20 Amp Yellow Horn 40 Amp Red/20 Amp Lt. F162 – Cabin Heater #1/Vacuum Pump – If Equipped Blue F163 50 Amp Red – Cabin Heater #2 – If Equipped F164 – 25 Amp Clear Powertrain Auto Shutdown F165 – 20 Amp Yellow Powertrain Shutdown F166 – 20 Amp Yellow Spare F167 – 30 Amp Green Powertrain Shutdown F168 – 10 Amp Red Air Conditioner Clutch F169 40 Amp Green – Emissions – Partial Zero Emissions Vehicle Motor F170 – 15 Amp Blue Emissions – Partial Zero Emissions Vehicle Actuators F172 – 20 Amp Yellow Spare F173 – 25 Amp Clear Anti Lock Brake Valves F174 – 20 Amp Yellow Siren – If Equipped F175 – 30 Amp Green Spare F176 – 10 Amp Red Powertrain Control Modules F177 – 20 Amp Yellow All Wheel Drive Module – If Equipped F178 – 25 Amp Clear Sunroof – If Equipped

129 Cavity Cartridge Fuse Mini-Fuse Description F179 – 10 Amp Red Battery Sensor F181 100 Amp Blue – Electrohydraulic Steering (EHPS) – If Equipped F182 50 Amp Red – Cabin Heater #3 – If Equipped F184 30 Amp Pink – Front Wiper Motor

JUMP STARTING CAUTION! If your vehicle has a discharged battery, it can battery, starter motor, alternator or electrical be jump started using a set of jumper cables system may occur. and a battery in another vehicle, or by using a portable battery booster pack. Jump starting NOTE: IN CASE OF EMERGENCY can be dangerous if done improperly, so please When using a portable battery booster pack, follow the procedures in this section carefully. follow the manufacturer's operating instructions and precautions. WARNING! Preparations For Jump Start Do not attempt jump starting if the battery is The battery in your vehicle is located between frozen. It could rupture or explode and cause the left front headlight assembly and the left personal injury. front wheel splash shield. To allow jump starting, there are remote battery posts located on Remote Battery Post Locations CAUTION! the left side of the engine compartment. 1 — Remote Positive (+) Battery Post Do not use a portable battery booster pack or 2 — Remote Negative (-) Battery Post any other booster source with a system volt- age greater than 12 Volts or damage to the

130 WARNING! 4. If using another vehicle to jump start the Connecting The Jumper Cables battery, park the vehicle within the jumper 1. Connect the positive (+) end of the jumper • Take care to avoid the radiator cooling fan cable’s reach, set the parking brake and cable to the remote positive (+) post of the whenever the hood is raised. It can start make sure the ignition is OFF. discharged vehicle. anytime the ignition switch is ON. You can 2. Connect the opposite end of the positive (+) be injured by moving fan blades. WARNING! jumper cable to the positive (+) post of the • Remove any metal jewelry such as rings, Do not allow vehicles to touch each other as booster battery. watch bands and bracelets that could this could establish a ground connection and make an inadvertent electrical contact. 3. Connect the negative end (-) of the jumper personal injury could result. You could be seriously injured. cable to the negative (-) post of the booster battery. • Batteries contain sulfuric acid that can Jump Starting Procedure burn your skin or eyes and generate hydro- 4. Connect the opposite end of the negative (-) gen gas which is flammable and explosive. WARNING! jumper cable to the remote negative (-) post Keep open flames or sparks away from the of the vehicle with the discharged battery. battery. Failure to follow this jump starting procedure could result in personal injury or property 1. Apply the parking brake, shift the automatic WARNING! damage due to battery explosion. transmission into PARK and turn the ignition Do not connect the jumper cable to the to LOCK. negative (-) post of the discharged battery. CAUTION! 2. Turn off the heater, radio, and all unneces- The resulting electrical spark could cause the battery to explode and could result in per- sary electrical accessories. Failure to follow these procedures could re- sonal injury. Only use the specific ground sult in damage to the charging system of the 3. Remove the protective cover over the remote point, do not use any other exposed metal booster vehicle or the discharged vehicle. positive (+) battery post. To remove the parts. cover, push the locking tab and pull upward on the cover.

131 5. Start the engine in the vehicle that has the If frequent jump starting is required to start your NOTE: booster battery, let the engine idle a few vehicle, you should have the battery and charg- There are steps that you can take to slow down minutes, and then start the engine in the ing system inspected at your authorized dealer. an impending overheat condition: vehicle with the discharged battery. • If your air conditioner (A/C) is on, turn it off. 6. Once the engine is started, remove the CAUTION! The A/C system adds heat to the engine cool- jumper cables in the reverse sequence: Accessories plugged into the vehicle power ing system and turning the A/C off can help remove this heat. Disconnecting The Jumper Cables outlets draw power from the vehicle’s battery, even when not in use (i.e., cellular devices, • You can also turn the temperature control to 1. Disconnect the negative (-) jumper cable etc.). Eventually, if plugged in long enough maximum heat, the mode control to floor and from the remote negative (-) post of the without engine operation, the vehicle’s bat- the blower control to high. This allows the vehicle with the discharged battery. tery will discharge sufficiently to degrade heater core to act as a supplement to the 2. Disconnect the negative end (-) of the battery life and/or prevent the engine from radiator and aids in removing heat from the

IN CASE OF EMERGENCY starting. jumper cable from the negative (-) post of engine cooling system. the booster battery. IF YOUR ENGINE OVERHEATS 3. Disconnect the opposite end of the positive WARNING! (+) jumper cable from the positive (+) post In any of the following situations, you can re- You or others can be badly burned by hot of the booster battery. duce the potential for overheating by taking the engine coolant (antifreeze) or steam from 4. Disconnect the positive (+) end of the appropriate action. your radiator. If you see or hear steam coming from under the hood, do not open the hood jumper cable from the remote positive (+) • On the highways — slow down. until the radiator has had time to cool. Never post of the discharged vehicle. • In city traffic — while stopped, place the try to open a cooling system pressure cap 5. Reinstall the protective cover over the re- transmission in NEUTRAL, but do not in- when the radiator or coolant bottle is hot. mote positive (+) battery post of the dis- crease the engine idle speed while preventing charged vehicle. vehicle motion with the brakes.

132 CAUTION! NOTE: 5. Insert a screwdriver or similar small tool into The maximum vehicle speed is reduced to the access port, and push and hold the Driving with a hot cooling system could dam- 48 mph (77 km/h), you may reduce vehicle override release lever forward. age your vehicle. If the temperature gauge speed further as needed. Once the engine oil 6. Move the gear selector to the NEUTRAL reads HOT (H), pull over and stop the ve- temperature is reduced, you may continue to position. hicle. Idle the vehicle with the air conditioner drive normally turned off until the pointer drops back into 7. The vehicle may then be started in the normal range. If the pointer remains on GEAR SELECTOR OVERRIDE NEUTRAL. HOT (H), and you hear continuous chimes, 8. Reinstall the gear selector override access turn the engine off immediately and call for If a malfunction occurs and the gear selector cover. service. cannot be moved out of the PARK position, you can use the following procedure to temporarily FREEING A STUCK VEHICLE move the gear selector: 2.4L Engine — If Equipped If your vehicle becomes stuck in mud, sand, or 1. Turn the engine OFF. snow, it can often be moved using a rocking On hot days, the engine oil temperature may 2. Firmly apply the parking brake. motion. Turn the steering wheel right and left to become too hot during sustained high-speed clear the area around the front wheels. Then, driving or if towing a trailer up long grades. If 3. Open the center console and remove the shift back and forth between DRIVE and RE- this happens, a HOTOIL message will flash in gear selector override access cover (located VERSE while gently pressing the accelerator. the odometer and the vehicle speed will be in the front lower right corner of the console Use the least amount of accelerator pedal pres- reduced to 48 mph (77 km/h) maximum until storage bin). sure that will maintain the rocking motion, with- the engine oil temperature is reduced. 4. Press and maintain firm pressure on the out spinning the wheels or racing the engine. brake pedal.

133 in your Owner’s Manual for further information. CAUTION! Once the vehicle has been freed, push the "ESC CAUTION! Racing the engine or spinning the wheels Off" switch again to restore "ESC On" mode. • When “rocking” a stuck vehicle by shifting may lead to transmission overheating and between DRIVE and REVERSE, do not failure. Allow the engine to idle with the WARNING! spin the wheels faster than 15 mph transmission in NEUTRAL for at least one (24 km/h), or drivetrain damage may re- Fast spinning tires can be dangerous. Forces minute after every five rocking-motion sult. generated by excessive wheel speeds may cycles. This will minimize overheating and • Revving the engine or spinning the wheels cause damage, or even failure, of the axle reduce the risk of transmission failure during too fast may lead to transmission overheat- and tires. A tire could explode and injure prolonged efforts to free a stuck vehicle. ing and failure. It can also damage the someone. Do not spin your vehicle's wheels tires. Do not spin the wheels above Push the "ESC Off" switch, to place the Elec- faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without stop- 30 mph (48 km/h) while in gear (no trans- tronic Stability Control (ESC) system in "ESC mission shifting occurring). IN CASE OF EMERGENCY Partial Off" mode, before rocking the vehicle. ping when you are stuck and do not let anyone near a spinning wheel, no matter Refer to “Electronic Brake Control” in “Safety” what the speed.

134 TOWING A DISABLED VEHICLE

This section describes procedures for towing a disabled vehicle using a commercial towing service. Towing Condition Wheel OFF The Ground FWD MODELS AWD MODELS IF transmission is operable: Flat Tow NONE • Ignition in ACC or ON/RUN mode NOT ALLOWED • Transmission in NEUTRAL • 25 mph (40 km/h) max speed Rear • 15 miles (24 km) NOT ALLOWED Wheel Lift Or Dolly Tow max distance Front OK NOT ALLOWED Flatbed ALL BEST METHOD OK

Proper towing or lifting equipment is required to If the key fob is unavailable, or the vehicle's CAUTION! prevent damage to your vehicle. Use only tow battery is discharged, refer to “Gear Selector bars and other equipment designed for this Override” in this section for instructions on sion components. Damage to your vehicle purpose, following equipment manufacturer’s shifting the transmission out of PARK for may result from improper towing. instructions. Use of safety chains is mandatory. towing. • Do not push or tow this vehicle with another vehicle as damage to the bumper Attach a tow bar or other towing device to main fascia and transmission may result. structural members of the vehicle, not to bum- CAUTION! pers or associated brackets. State and local laws regarding vehicles under tow must be observed. • Do not use sling type equipment when towing. Vehicle damage may occur. If you must use the accessories (wipers, defrost- • When securing the vehicle to a flatbed ers, etc.) while being towed, the ignition must truck, do not attach to front or rear suspen- be in the ON/RUN mode, not the ACC mode. 135 All-Wheel Drive (AWD) Models • The transmission must be in NEUTRAL. ENHANCED ACCIDENT RESPONSE The manufacturer requires towing with all four • The towing distance must not exceed SYSTEM (EARS) wheels OFF the ground. Acceptable methods 15 miles (24 km). This vehicle is equipped with an Enhanced are to tow the vehicle on a flatbed, or with one • The towing speed must not exceed 25 mph end of the vehicle raised and the opposite end (40 km/h). Accident Response System. on a towing dolly. Please refer to “Occupant Restraint Systems” If the transmission is not operable, or the ve- in “Safety” for further information on the En- hicle must be towed faster than 25 mph CAUTION! hanced Accident Response System (EARS) (40 km/h) or farther than 15 miles (24 km), it function. Towing this vehicle in violation of the above must be towed with the front wheels OFF the requirements can cause severe transmission ground (using a flatbed truck, towing dolly, or and/or power transfer unit damage. Damage wheel lift equipment with the front wheels EVENT DATA RECORDER (EDR) from improper towing is not covered under

IN CASE OF EMERGENCY raised). the New Vehicle Limited Warranty. This vehicle is equipped with an Event Data Recorder (EDR). The main purpose of an EDR is Front-Wheel Drive (FWD) Models CAUTION! to record data that will assist in understanding how a vehicle’s systems performed under cer- The manufacturer recommends towing your ve- Towing faster than 25 mph (40 km/h) or farther than 15 miles (24 km) with front tain crash or near crash-like situations, such as hicle with all four wheels OFF the ground using a an air bag deployment or hitting a road obstacle. flatbed. wheels on the ground can cause severe transmission damage. Damage from improper Please refer to “Occupant Restraint Systems” If flatbed equipment is not available, and the towing is not covered by the New Vehicle in “Safety” for further information on the Event transmission is operable, the vehicle may be flat Limited Warranty. Data Recorder (EDR). towed (with all four wheels on the ground) under the following conditions:

136 SERVICING AND MAINTENANCE

SERVICING AND MAINTENANCE SCHEDULED SERVICING ...... 138 RAISING THE VEHICLE...... 145 Wheel And Wheel Trim Care ...... 159 Maintenance Plan ...... 139 TIRES ...... 145 DEPARTMENT OF TRANSPORTATION UNIFORM ENGINE COMPARTMENT ...... 143 Tire Safety Information ...... 145 TIRE QUALITY GRADES ...... 160 2.4L Engine ...... 143 Tires — General Information ...... 152 Treadwear ...... 160 3.6L Engine ...... 144 Tire Types ...... 156 Traction Grades ...... 160 Spare Tires — If Equipped ...... 157 Temperature Grades ...... 161

137 SCHEDULED SERVICING Your authorized dealer will reset the oil change operated in a dusty and off road environment or indicator message after completing the sched- is operated predominately at idle or only very Your vehicle is equipped with an automatic oil uled oil change. If a scheduled oil change is low engine RPM’s. This type of vehicle use is change indicator system. The oil change indica- performed by someone other than your autho- considered Severe Duty. tor system will remind you that it is time to take rized dealer, the message can be reset by refer- Once A Month Or Before A Long Trip: your vehicle in for scheduled maintenance. ring to the steps described under “Instrument Cluster Display” in “Getting To Know Your In- • Check engine oil level. Based on engine operation conditions, the oil strument Panel” in your Owner’s Manual for • Check windshield washer fluid level. change indicator message will illuminate. This further information. means that service is required for your vehicle. • Check tire pressure and look for unusual wear Operating conditions such as frequent short- NOTE: or damage. Rotate tires at the first sign of trips, trailer tow, extremely hot or cold ambient Under no circumstances should oil change in- irregular wear, even if it occurs before the oil temperatures, and E-85 fuel usage will influ- tervals exceed 10,000 miles (16,000 km), indicator system turns on. ence when the “Change Oil” or “Oil Change twelve months or 350 hours of engine run time, • Check the fluid levels of the coolant reservoir, Required” message is displayed. Severe Oper- whichever comes first. The 350 hours of engine run or idle time is generally only a concern for brake master cylinder, power steering, and ating Conditions can cause the change oil mes- fleet customers. transmission (4-speed only) and fill as sage to illuminate as early as 3,500 miles

SERVICING AND MAINTENANCE needed. (5,600 km) since last reset. Have your vehicle Severe Duty All Models serviced as soon as possible, within the next • Check function of all interior and exterior Change engine oil at 4,000 miles (6,500 km) or lights. 500 miles (805 km). 350 hours of engine run time if the vehicle is

138 Maintenance Plan Required Maintenance Intervals. Refer to the maintenance plan on the following page for the required maintenance intervals. At Every Oil Change Interval As Indicated By Oil Change Indicator System: • Change oil and filter. • Rotate the tires. Rotate at the first sign of irregular wear, even if it occurs before the oil indicator system turns on. • Inspect battery and clean and tighten terminals as required. • Inspect automatic transmission fluid if equipped with dipstick. • Inspect brake pads, shoes, rotors, drums, hoses and park brake. • Inspect engine cooling system protection and hoses. • Inspect exhaust system. • Inspect engine air cleaner if using in dusty or off-road conditions.

139 Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 130,000 140,000 150,000 Or Years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Or Kilometers: 32,000 48,000 64,000 80,000 96,000 112,000 128,000 144,000 160,000 176,000 192,000 208,000 224,000 240,000 Additional Inspections Inspect the CV joints. X X X X X Inspect front suspension, tie rod ends, and XXX X X X X replace if necessary. Inspect the brake linings, parking brake func- XXX X X X X tion. Additional Maintenance Replace engine air filter. X X X X X Replace air conditioning filter. X X X X X X X Replace spark plugs (2.4L Engine). ** X X X X X SERVICING AND MAINTENANCE Replace spark plugs (3.6L Engine). ** X Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) XX whichever comes first. Change the automatic transmission fluid and X filter. Change the automatic transmission fluid and filter if using your vehicle for any of the follow- XX ing: police, taxi, fleet, or frequent trailer towing.

140 Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 130,000 140,000 150,000 Or Years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Or Kilometers: 32,000 48,000 64,000 80,000 96,000 112,000 128,000 144,000 160,000 176,000 192,000 208,000 224,000 240,000 Replace rear drive assembly (RDA) fluid. X X Replace power transfer unit (PTU) fluid. X X Inspect and replace PCV valve if necessary. X

141 ** The spark plug change interval is mileage based only, yearly intervals do not apply.

WARNING!

• You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. • Failure to properly inspect and maintain your vehicle could result in a component malfunction and effect vehicle handling and performance. This could cause an accident. SERVICING AND MAINTENANCE Heavy Duty Use Of The Vehicle Change engine oil at 4,000 miles (6,500 km) or 350 hours of engine run time if the vehicle is operated in a dusty and off road environment or is operated predominately at idle or only very low engine RPM’s. This type of vehicle use is considered Severe Duty.

142 ENGINE COMPARTMENT 2.4L Engine

1 — Engine Coolant Reservoir 7 — Power Distribution Center (Fuses) 2 — Power Steering Fluid Reservoir 8 — Air Cleaner Filter 3 — Engine Oil Fill 9 — Automatic Transmission Dipstick (4–Speed Only – If Equipped) 4 — Brake Fluid Reservoir 10 — Washer Fluid Reservoir 5 — Remote Jump Start (Positive Battery Post) 11 — Coolant Pressure Cap 6 — Remote Jump Start (Negative Battery Post) 12 — Engine Oil Dipstick

143 3.6L Engine SERVICING AND MAINTENANCE

1 — Engine Coolant Reservoir Pressure Cap 7 — Power Distribution Center (Fuses) 2 — Power Steering Fluid Reservoir 8 — Air Cleaner Filter 3 — Oil Filter Access 9 — Washer Fluid Reservoir 4 — Brake Fluid Reservoir 10 — Engine Oil Dipstick 5 — Remote Jump Start (Positive Battery Post) 11 — Engine Oil Fill 6 — Remote Jump Start (Negative Battery Post) 12 — Engine Coolant Reservoir

144 RAISING THE VEHICLE Tire Markings NOTE: • P (Passenger) — Metric tire sizing is based on In the case where it is necessary to raise the U.S. design standards. P-Metric tires have the vehicle, go to an authorized dealer or service letter “P” molded into the sidewall preceding the station. size designation. Example: P215/65R15 95H. TIRES • European — Metric tire sizing is based on European design standards. Tires designed to Tire Safety Information this standard have the tire size molded into the sidewall beginning with the section width. Tire safety information will cover aspects of the The letter "P" is absent from this tire size following information: Tire Markings, Tire Iden- Tire Markings designation. Example: 215/65R15 96H. tification Numbers, Tire Terminology and Defi- • LT (Light Truck) — Metric tire sizing is based nitions, Tire Pressures, and Tire Loading. 1 — U.S. DOT 4 — Maximum on U.S. design standards. The size designa- Safety Standards Load tion for LT-Metric tires is the same as for Code (TIN) P-Metric tires except for the letters “LT” that 2 — Size Desig- 5 — Maximum are molded into the sidewall preceding the nation Pressure size designation. Example: LT235/85R16. 3 — Service 6 — Treadwear, • Temporary spare tires are designed for tempo- Description Traction and rary emergency use only. Temporary high pres- Temperature sure compact spare tires have the letter “T” or Grades “S” molded into the sidewall preceding the size designation. Example: T145/ 80D18 103M. • High flotation tire sizing is based on U.S. design standards and it begins with the tire diameter molded into the sidewall. Example: 31x10.5 R15 LT. 145 Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on U.S. design standards, or "....blank...." = Passenger car tire based on European design standards, or LT = Light truck tire based on U.S. design standards, or TorS= Temporary spare tire or 31 = Overall diameter in inches (in) 215, 235, 145 = Section width in millimeters (mm) 65, 85, 80 = Aspect ratio in percent (%) • Ratio of section height to section width of tire, or 10.5 = Section width in inches (in) R = Construction code • "R" means radial construction, or • "D" means diagonal or bias construction 15, 16, 18 = Rim diameter in inches (in)

SERVICING AND MAINTENANCE Service Description: 95 = Load Index • A numerical code associated with the maximum load a tire can carry H = Speed Symbol • A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions • The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e., tire pressure, vehicle loading, road conditions, and posted speed limits)

146 EXAMPLE: Load Identification: Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire: • XL = Extra load (or reinforced) tire, or • LL = Light load tire or • C, D, E, F, G = Load range associated with the maximum load a tire can carry at a specified pressure Maximum Load – Maximum load indicates the maximum load this tire is designed to carry Maximum Pressure – Maximum pressure indicates the maximum permissible cold tire inflation pressure for this tire

Tire Identification Number (TIN) white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as The TIN may be found on one or both sides of mounted on the vehicle. If the TIN is not found the tire; however, the date code may only be on on the outboard side, then you will find it on the one side. Tires with white sidewalls will have the full TIN, including the date code, located on the inboard side of the tire. EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation • This symbol certifies that the tire is in compliance with the U.S. Department of Transportation tire safety standards and is approved for highway use MA = Code representing the tire manufacturing location (two digits) L9 = Code representing the tire size (two digits) ABCD = Code used by the tire manufacturer (one to four digits) 03 = Number representing the week in which the tire was manufactured (two digits) • 03 means the 3rd week

147 EXAMPLE: 01 = Number representing the year in which the tire was manufactured (two digits) • 01 means the year 2001 • Prior to July 2000, tire manufacturers were only required to have one number to represent the year in which the tire was manufactured. Example: 031 could represent the 3rd week of 1981 or 1991

Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours. Inflation pressure is measured in units of PSI (pounds per square inch) or kPa (kilopascals). Maximum Inflation Pressure The maximum inflation pressure is the maximum permissible cold tire inflation pressure for this tire. The maximum inflation pressure is molded into the sidewall. Recommended Cold Tire Inflation Pressure Vehicle manufacturer's recommended cold tire inflation pressure as shown on the tire plac-

SERVICING AND MAINTENANCE ard. Tire Placard A label permanently attached to the vehicle describing the vehicle’s loading capacity, the original equipment tire sizes and the recommended cold tire inflation pressures.

148 Tire Loading And Tire Pressure This placard tells you important information about the: NOTE: The proper cold tire inflation pressure is listed 1. Number of people that can be carried in the on the driver’s side B-Pillar or the rear edge of vehicle. the driver's side door. 2. Total weight your vehicle can carry. Check the inflation pressure of each tire, includ- 3. Tire size designed for your vehicle. ing the spare tire (if equipped), at least monthly 4. Cold tire inflation pressures for the front, and inflate to the recommended pressure for rear, and spare tires. your vehicle. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on Example Tire Placard Location (B-Pillar) your vehicle. You will not exceed the tire's load carrying capacity if you adhere to the loading Tire And Loading Information Placard conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading Infor- mation placard in “Vehicle Loading” in the “Starting And Operating” section of this manual.

NOTE: Under a maximum loaded vehicle condition, gross axle weight ratings (GAWRs) for the front Example Tire Placard Location (Door) and rear axles must not be exceeded. Tire And Loading Information Placard

149 To determine the maximum loading conditions (4) The resulting figure equals the avail- Metric Example For Load Limit of your vehicle, locate the statement “The com- able amount of cargo and luggage load For example, if “XXX” amount equals 635 kg bined weight of occupants and cargo should capacity. For example, if “XXX” amount and there will be five 68 kg passengers in your never exceed XXX kg or XXX lbs” on the Tire and equals 1400 lbs. and there will be five vehicle, the amount of available cargo and lug- Loading Information placard. The combined gage load capacity is 295 kg (635-340 (5x68) weight of occupants, cargo/luggage and trailer 150 lb passengers in your vehicle, the = 295 kg) as shown in step 4. tongue weight (if applicable) should never ex- amount of available cargo and luggage ceed the weight referenced here. load capacity is 650 lbs. (1400-750 NOTE: (5x150) = 650 lbs.) Steps For Determining Correct Load • If your vehicle will be towing a trailer, load Limit— (5) Determine the combined weight of from your trailer will be transferred to your luggage and cargo being loaded on the vehicle. The following table shows examples (1) Locate the statement “The com- on how to calculate total load, cargo/luggage, vehicle. That weight may not safely ex- bined weight of occupants and cargo and towing capacities of your vehicle with ceed the available cargo and luggage should never exceed XXX kg or XXX lbs.” varying seating configurations and number on your vehicle's placard. load capacity calculated in Step 4. and size of occupants. This table is for illus- tration purposes only and may not be accurate SERVICING AND MAINTENANCE (2) Determine the combined weight of (6) If your vehicle will be towing a trailer, for the seating and load carry capacity of your the driver and passengers that will be load from your trailer will be transferred vehicle. riding in your vehicle. to your vehicle. Consult this manual to • For the following example, the combined determine how this reduces the avail- (3) Subtract the combined weight of the weight of occupants and cargo should never able cargo and luggage load capacity of exceed 865 lbs (392 kg). driver and passengers from XXX kg or your vehicle. XXX lbs.

150 151 WARNING! Safety NOTE: • Unequal tire pressures from side to side may Overloading of your tires is dangerous. Over- WARNING! cause erratic and unpredictable steering re- loading can cause tire failure, affect vehicle sponse. handling, and increase your stopping dis- • Improperly inflated tires are dangerous tance. Use tires of the recommended load and can cause collisions. • Unequal tire pressure from side to side may capacity for your vehicle. Never overload • Underinflation increases tire flexing and cause the vehicle to drift left or right. them. can result in overheating and tire failure. • Overinflation reduces a tire's ability to Fuel Economy Tires — General Information cushion shock. Objects on the road and Underinflated tires will increase tire rolling re- chuckholes can cause damage that result sistance resulting in higher fuel consumption. Tire Pressure in tire failure. • Overinflated or underinflated tires can af- Tread Wear Proper tire inflation pressure is essential to the fect vehicle handling and can fail sud- safe and satisfactory operation of your vehicle. Improper cold tire inflation pressures can cause denly, resulting in loss of vehicle control. Four primary areas are affected by improper tire abnormal wear patterns and reduced tread life, • Unequal tire pressures can cause steering pressure: resulting in the need for earlier tire replace- problems. You could lose control of your ment. SERVICING AND MAINTENANCE • Safety and Vehicle Stability vehicle. • Economy • Unequal tire pressures from one side of the Ride Comfort And Vehicle Stability vehicle to the other can cause the vehicle Proper tire inflation contributes to a comfort- • Tread Wear to drift to the right or left. • Ride Comfort • Always drive with each tire inflated to the able ride. Over-inflation produces a jarring and recommended cold tire inflation pressure. uncomfortable ride. Tire Inflation Pressures Both under-inflation and over-inflation affect the stability of the vehicle and can produce a The proper cold tire inflation pressure is listed feeling of sluggish response or over responsive- on the driver's side B-Pillar or rear edge of the ness in the steering. driver's side door. 152 At least once a month: Check tire pressures more often if subject to a hicle loading may be required for high-speed vehicle operation. Refer to your authorized tire • Check and adjust tire pressure with a good wide range of outdoor temperatures, as tire dealer or original equipment vehicle dealer for quality pocket-type pressure gauge. Do not pressures vary with temperature changes. recommended safe operating speeds, loading make a visual judgement when determining Tire pressures change by approximately 1 psi and cold tire inflation pressures. proper inflation. Tires may look properly in- (7 kPa) per 12°F (7°C) of air temperature flated even when they are under-inflated. change. Keep this in mind when checking tire WARNING! • Inspect tires for signs of tire wear or visible pressure inside a garage, especially in the Win- damage. ter. High speed driving with your vehicle under maximum load is dangerous. The added Example: If garage temperature = 68°F (20°C) strain on your tires could cause them to fail. CAUTION! and the outside temperature = 32°F (0°C) then You could have a serious collision. Do not the cold tire inflation pressure should be in- After inspecting or adjusting the tire pres- drive a vehicle loaded to the maximum ca- creased by 3 psi (21 kPa), which equals 1 psi sure, always reinstall the valve stem cap. pacity at continuous speeds above 75 mph (7 kPa) for every 12°F (7°C) for this outside This will prevent moisture and dirt from en- (120 km/h). tering the valve stem, which could damage temperature condition. the valve stem. Tire pressure may increase from 2 to 6 psi (13 to Radial Ply Tires 40 kPa) during operation. DO NOT reduce this Inflation pressures specified on the placard are normal pressure build up or your tire pressure WARNING! always “cold tire inflation pressure”. Cold tire will be too low. inflation pressure is defined as the tire pressure Combining radial ply tires with other types of after the vehicle has not been driven for at least Tire Pressures For High Speed Operation tires on your vehicle will cause your vehicle to handle poorly. The instability could cause a three hours, or driven less than 1 mile (1.6 km) The manufacturer advocates driving at safe collision. Always use radial ply tires in sets of after sitting for a minimum of three hours. The speeds and within posted speed limits. Where four. Never combine them with other types of cold tire inflation pressure must not exceed the speed limits or conditions are such that the tires. maximum inflation pressure molded into the vehicle can be driven at high speeds, maintain- tire sidewall. ing correct tire inflation pressure is very important. Increased tire pressure and reduced ve- 153 Tire Repair Run Flat Tires — If Equipped Tire Spinning If your tire becomes damaged, it may be re- Run Flat tires allow you the capability to drive When stuck in mud, sand, snow, or ice condi- paired if it meets the following criteria: 50 miles (80 km) at 50 mph (80 km/h) after a tions, do not spin your vehicle's wheels above 30 mph (48 km/h) or for longer than 30 sec- • The tire has not been driven on when flat. rapid loss of inflation pressure. This rapid loss of inflation is referred to as the Run Flat mode. A onds continuously without stopping. • The damage is only on the tread section of Run Flat mode occurs when the tire inflation Refer to “Freeing A Stuck Vehicle” in “In Case your tire (sidewall damage is not repairable). pressure is of/or below 14 psi (96 kPa). Once a Of Emergency” for further information. • The puncture is no greater than a ¼ of an inch Run Flat tire reaches the run flat mode it has (6 mm). limited driving capabilities and needs to be WARNING! replaced immediately. A Run Flat tire is not Consult an authorized tire dealer for tire repairs repairable. Fast spinning tires can be dangerous. Forces and additional information. generated by excessive wheel speeds may It is not recommended driving a vehicle loaded Damaged Run Flat tires, or Run Flat tires that cause tire damage or failure. A tire could at full capacity or to tow a trailer while a tire is in have experienced a loss of pressure should be explode and injure someone. Do not spin the run flat mode. replaced immediately with another Run Flat tire your vehicle's wheels faster than 30 mph (48 km/h) for more than 30 seconds continu- of identical size and service description (Load See the tire pressure monitoring section for SERVICING AND MAINTENANCE ously when you are stuck, and do not let Index and Speed Symbol). more information. anyone near a spinning wheel, no matter what the speed.

154 Tread Wear Indicators Life Of Tire Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Protect Tread wear indicators are in the original equip- The service life of a tire is dependent upon tires from contact with oil, grease, and gasoline. ment tires to help you in determining when your varying factors including, but not limited to: tires should be replaced. • Driving style. Replacement Tires • Tire pressure - Improper cold tire inflation The tires on your new vehicle provide a balance pressures can cause uneven wear patterns to of many characteristics. They should be in- develop across the tire tread. These abnormal spected regularly for wear and correct cold tire wear patterns will reduce tread life, resulting inflation pressures. The manufacturer strongly in the need for earlier tire replacement. recommends that you use tires equivalent to the • Distance driven. originals in size, quality and performance when Tire Tread • Performance tires, tires with a speed rating of replacement is needed. Refer to the paragraph on “Tread Wear Indicators” in this section. Re- 1 — Worn Tire V or higher, and Summer tires typically have a 2 — New Tire reduced tread life. Rotation of these tires per fer to the Tire and Loading Information placard the vehicle scheduled maintenance is highly or the Vehicle Certification Label for the size recommended. designation of your tire. The Load Index and These indicators are molded into the bottom of Speed Symbol for your tire will be found on the the tread grooves. They will appear as bands WARNING! original equipment tire sidewall. when the tread depth becomes a 1/16 of an Tires and the spare tire should be replaced See the Tire Sizing Chart example found in the inch (1.6 mm). When the tread is worn to the after six years, regardless of the remaining “Tire Safety Information” section of this manual tread wear indicators, the tire should be re- tread. Failure to follow this warning can re- for more information relating to the Load Index placed. Refer to “Replacement Tires” in this sult in sudden tire failure. You could lose and Speed Symbol of a tire. section for further information. control and have a collision resulting in serious injury or death.

155 It is recommended to replace the two front tires WARNING! Tire Types or two rear tires as a pair. Replacing just one tire can seriously affect your vehicle’s handling. If have a collision resulting in serious injury All Season Tires — If Equipped or death. Use only the tire and wheel sizes you ever replace a wheel, make sure that the All Season tires provide traction for all seasons with load ratings approved for your vehicle. wheel’s specifications match those of the origi- (Spring, Summer, Fall, and Winter). Traction • Never use a tire with a smaller load index nal wheels. levels may vary between different all season or capacity, other than what was originally It is recommended you contact your authorized equipped on your vehicle. Using a tire with tires. All season tires can be identified by the tire dealer or original equipment dealer with any a smaller load index could result in tire M+S, M&S, M/S or MS designation on the tire questions you may have on tire specifications or overloading and failure. You could lose sidewall. Use all season tires only in sets of four; capability. Failure to use equivalent replace- control and have a collision. failure to do so may adversely affect the safety ment tires may adversely affect the safety, han- • Failure to equip your vehicle with tires and handling of your vehicle. dling, and ride of your vehicle. having adequate speed capability can re- Summer Or Three Season Tires — If sult in sudden tire failure and loss of ve- Equipped WARNING! hicle control. Summer tires provide traction in both wet and • Do not use a tire, wheel size, load rating, or dry conditions, and are not intended to be

SERVICING AND MAINTENANCE CAUTION! speed rating other than that specified for driven in snow or on ice. If your vehicle is your vehicle. Some combinations of unap- Replacing original tires with tires of a differ- equipped with Summer tires, be aware these proved tires and wheels may change sus- ent size may result in false speedometer and tires are not designed for Winter or cold driving pension dimensions and performance odometer readings. conditions. Install Winter tires on your vehicle characteristics, resulting in changes to when ambient temperatures are less than 40°F steering, handling, and braking of your (5°C) or if roads are covered with ice or snow. vehicle. This can cause unpredictable han- For more information, contact an authorized dling and stress to steering and suspension dealer. components. You could lose control and

156 Summer tires do not contain the all season Snow tires generally have lower speed ratings CAUTION! designation or mountain/snowflake symbol on than what was originally equipped with your the tire sidewall. Use Summer tires only in sets vehicle and should not be operated at sustained porary spare installed. Damage to the vehicle of four; failure to do so may adversely affect the speeds over 75 mph (120 km/h). For speeds may result. safety and handling of your vehicle. above 75 mph (120 km/h) refer to original Spare Tire Matching Original Equipped Tire equipment or an authorized tire dealer for rec- And Wheel — If Equipped WARNING! ommended safe operating speeds, loading and cold tire inflation pressures. Your vehicle may be equipped with a spare tire Do not use Summer tires in snow/ice condi- and wheel equivalent in look and function to the tions. You could lose vehicle control, result- While studded tires improve performance on ing in severe injury or death. Driving too fast original equipment tire and wheel found on the ice, skid and traction capability on wet or dry front or rear axle of your vehicle. This spare tire for conditions also creates the possibility of surfaces may be poorer than that of non- loss of vehicle control. may be used in the tire rotation for your vehicle. studded tires. Some states prohibit studded If your vehicle has this option, refer to an autho- Snow Tires tires; therefore, local laws should be checked rized tire dealer for the recommended tire rota- before using these tire types. tion pattern. Some areas of the country require the use of snow tires during the Winter. Snow tires can be identified Spare Tires — If Equipped Compact Spare Tire — If Equipped by a “mountain/snowflake” symbol on the tire For vehicles equipped with Tire Service Kit in- The compact spare is for temporary emergency sidewall. stead of a spare tire, please refer to “Tire Service use only. You can identify if your vehicle is If you need snow tires, Kit” in “In Case Of Emergency” in the Owner’s equipped with a compact spare by looking at the select tires equivalent in Manual for further information. spare tire description on the Tire and Loading size and type to the origi- Information Placard located on the driver’s side nal equipment tires. Use CAUTION! door opening or on the sidewall of the tire. snow tires only in sets of Compact spare tire descriptions begin with the four; failure to do so may Because of the reduced ground clearance, do letter “T” or “S” preceding the size designation. adversely affect the not take your vehicle through an automatic Example: T145/80D18 103M. safety and handling of car wash with a compact or limited use tem- your vehicle. T,S=Temporary Spare Tire 157 Since this tire has limited tread life, the original Collapsible Spare Tire — If Equipped WARNING! equipment tire should be repaired (or replaced) The collapsible spare is for temporary emer- and reinstalled on your vehicle at the first op- gency use only. You can identify if your vehicle is Compact and Collapsible spares are for tem- portunity. porary emergency use only. With these equipped with a collapsible spare by looking at spares, do not drive more than 50 mph Do not install a wheel cover or attempt to mount the spare tire description on the Tire and Load- (80 km/h). Temporary use spares have lim- a conventional tire on the compact spare wheel, ing Information Placard located on the driver’s ited tread life. When the tread is worn to the since the wheel is designed specifically for the side door opening or on the sidewall of the tire. tread wear indicators, the temporary use compact spare tire. Do not install more than one Collapsible spare tire description example: spare tire needs to be replaced. Be sure to compact spare tire and wheel on the vehicle at 165/80-17 101P. follow the warnings, which apply to your any given time. spare. Failure to do so could result in spare Since this tire has limited tread life, the original tire failure and loss of vehicle control. WARNING! equipment tire should be repaired (or replaced) and reinstalled on your vehicle at the first op- Full Size Spare — If Equipped Compact and collapsible spares are for tem- portunity. porary emergency use only. With these The full size spare is for temporary emergency spares, do not drive more than 50 mph Inflate collapsible tire only after the wheel is use only. This tire may look like the originally

SERVICING AND MAINTENANCE (80 km/h). Temporary use spares have lim- properly installed to the vehicle. Inflate the equipped tire on the front or rear axle of your ited tread life. When the tread is worn to the collapsible tire using the electric air pump be- vehicle, but it is not. This spare tire may have tread wear indicators, the temporary use fore lowering the vehicle. limited tread life. When the tread is worn to the spare tire needs to be replaced. Be sure to tread wear indicators, the temporary use full follow the warnings, which apply to your Do not install a wheel cover or attempt to mount size spare tire needs to be replaced. Since it is spare. Failure to do so could result in spare a conventional tire on the collapsible spare not the same as your original equipment tire, tire failure and loss of vehicle control. wheel, since the wheel is designed specifically replace (or repair) the original equipment tire for the collapsible spare tire. and reinstall on the vehicle at the first opportunity.

158 Limited Use Spare — If Equipped Wheel And Wheel Trim Care CAUTION! The limited use spare tire is for temporary emer- All wheels and wheel trim, especially aluminum Such damage is not covered by the New gency use only. This tire is identified by a label and chrome plated wheels, should be cleaned Vehicle Limited Warranty. Only car wash located on the limited use spare wheel. This regularly using mild (neutral Ph) soap and water soap, Mopar Wheel Cleaner or equivalent is label contains the driving limitations for this to maintain their luster and to prevent corrosion. recommended. spare. This tire may look like the original Wash wheels with the same soap solution rec- equipped tire on the front or rear axle of your ommended for the body of the vehicle and When cleaning extremely dirty wheels including vehicle, but it is not. Installation of this limited remember to always wash when the surfaces are excessive brake dust, care must be taken in the use spare tire affects vehicle handling. Since it selection of tire and wheel cleaning chemicals is not the same as your original equipment tire, not hot to the touch. and equipment to prevent damage to the replace (or repair) the original equipment tire Your wheels are susceptible to deterioration wheels. Mopar Wheel Treatment or Mopar and reinstall on the vehicle at the first caused by salt, sodium chloride, magnesium Chrome Cleaner or their equivalent is recom- opportunity. chloride, calcium chloride, etc., and other road mended or select a non-abrasive, non-acidic chemicals used to melt ice or control dust on cleaner for aluminum or chrome wheels. WARNING! dirt roads. Use a soft cloth or sponge and mild soap to wipe away promptly. Do not use harsh Limited use spares are for emergency use only. chemicals or a stiff brush. They can damage the CAUTION! Installation of this limited use spare tire affects vehicle handling. With this tire, do not wheel’s protective coating that helps keep them Do not use scouring pads, steel wool, a bristle drive more than the speed listed on the limited from corroding and tarnishing. brush, metal polishes or oven cleaner. These use spare wheel. Keep inflated to the cold tire products may damage the wheel's protective inflation pressures listed on your Tire and CAUTION! finish. Such damage is not covered by the Loading Information Placard located on the New Vehicle Limited Warranty. Only car wash Avoid products or automatic car washes that driver’s side B-Pillar or the rear edge of the soap, Mopar Wheel Cleaner or equivalent is use acidic solutions or strong alkaline addi- driver’s side door. Replace (or repair) the origi- recommended. nal equipment tire at the first opportunity and tives or harsh brushes. Many aftermarket reinstall it on your vehicle. Failure to do so wheel cleaners and automatic car washes could result in loss of vehicle control. may damage the wheel's protective finish.

159 NOTE: DEPARTMENT OF depends upon the actual conditions of If you intend parking or storing your vehicle for TRANSPORTATION UNIFORM TIRE their use, however, and may depart sig- an extended period after cleaning the wheels nificantly from the norm due to varia- with wheel cleaner, drive your vehicle and apply QUALITY GRADES tions in driving habits, service practices, the brakes to remove the water droplets from the The following tire grading categories brake components. This activity will remove the and differences in road characteristics red rust on the brake rotors and prevent vehicle were established by the National High- and climate. vibration when braking. way Traffic Safety Administration. The specific grade rating assigned by the Traction Grades Dark Vapor Chrome, Black Satin Chrome, or Low tire's manufacturer in each category is Gloss Clear Coat Wheels The Traction grades, from highest to low- shown on the sidewall of the tires on your est, are AA, A, B, and C. These grades CAUTION! vehicle. represent the tire's ability to stop on wet All passenger vehicle tires must conform pavement, as measured under con- If your vehicle is equipped with these spe- trolled conditions on specified govern- cialty wheels, DO NOT USE wheel cleaners, to Federal safety requirements in addi- abrasives, or polishing compounds. They will tion to these grades. ment test surfaces of asphalt and con-

SERVICING AND MAINTENANCE permanently damage this finish and such crete. A tire marked C may have poor damage is not covered by the New Vehicle Treadwear traction performance. Limited Warranty. HAND WASH ONLY US- The Treadwear grade is a comparative ING MILD SOAP AND WATER WITH A SOFT rating, based on the wear rate of the tire WARNING! CLOTH. Used on a regular basis; this is all that is required to maintain this finish. when tested under controlled conditions The traction grade assigned to this tire on a specified government test course. is based on straight-ahead braking For example, a tire graded 150 would traction tests, and does not include wear one and one-half times as well on acceleration, cornering, hydroplaning, the government course as a tire graded or peak traction characteristics. 100. The relative performance of tires 160 Temperature Grades grade C corresponds to a level of perfor- WARNING! mance, which all passenger vehicle tires The Temperature grades are A (the high- must meet under the Federal Motor Ve- inflated and not overloaded. Excessive est), B, and C, representing the tire's hicle Safety Standard No. 109. Grades B speed, under-inflation, or excessive resistance to the generation of heat and and A represent higher levels of perfor- loading, either separately or in combi- its ability to dissipate heat, when tested mance on the laboratory test wheel, than nation, can cause heat buildup and under controlled conditions on a speci- the minimum required by law. possible tire failure. fied indoor laboratory test wheel. Sustained high temperature can cause WARNING! the material of the tire to degenerate and The temperature grade for this tire is reduce tire life, and excessive tempera- established for a tire that is properly ture can lead to sudden tire failure. The

161 162 TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS WHEEL AND TIRE TORQUE SPECIFICATIONS . .164 FLUID CAPACITIES ...... 165 Chassis...... 167 Torque Specifications ...... 164 FLUIDS AND LUBRICANTS ...... 166 MOPAR ACCESSORIES...... 167 FLEXIBLE FUEL (3.6L ENGINE ONLY) ...... 164 Engine ...... 166 Authentic Accessories By Mopar ...... 167 E-85 General Information ...... 164

163 WHEEL AND TIRE TORQUE FLEXIBLE FUEL (3.6L ENGINE SPECIFICATIONS ONLY) Proper lug nut/bolt torque is very important to E-85 General Information ensure that the wheel is properly mounted to the vehicle. Any time a wheel has been removed and The information in this section is unique for reinstalled on the vehicle, the lug nuts/bolts should Flexible Fuel vehicles only. These vehicles can be torqued using a properly calibrated torque be identified by a unique fuel filler door label wrench using a high quality six sided (hex) deep that states Ethanol (E-85) or Unleaded Gasoline wall socket. Only and/or a yellow fuel cap. Refer to the Torque Specifications Owner’s Manual for further information. Lug Nut/Bolt **Lug Nut/Bolt Lug Nut/Bolt Torque Size Socket Size CAUTION! 100 Ft-Lbs Torque Pattern M12 x 1.5 19 mm Only vehicles with the E-85 fuel filler door

TECHNICAL SPECIFICATIONS (135 N·m) After 25 miles (40 km), check the lug nut/bolt label or a yellow gas cap can operate on E-85. **Use only your authorized dealer recom- torque to be sure that all the lug nuts/bolts are mended lug nuts/bolts and clean or remove any properly seated against the wheel. dirt or oil before tightening. Inspect the wheel mounting surface prior to WARNING! mounting the tire and remove any corrosion or To avoid the risk of forcing the vehicle off the loose particles. jack, do not tighten the lug nuts fully until the Tighten the lug nuts/bolts in a star pattern until vehicle has been lowered. Failure to follow this warning may result in personal injury. each nut/bolt has been tightened twice. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it halfway). 164 FLUID CAPACITIES U.S. Metric Fuel (Approximate) Front Wheel Drive (FWD) Models 20.5 Gallons 77.6 Liters All-Wheel Drive Models 21.1 Gallons 79.8 Liters Engine Oil With Filter 2.4L Engine (SAE 5W-20, API Certified) 4.5 Quarts 4.26 Liters 3.6L Engine (SAE 5W-20, API Certified) 6 Quarts 5.6 Liters Cooling System* 2.4L Engine and Single or Dual-Zone Climate Control System (Mopar Antifreeze/Engine 8 Quarts 7.5 Liters Coolant 10 Year/150,000 Mile Formula) 2.4L Engine and Three-Zone Climate Control System (Mopar Antifreeze/Engine Coolant 10 Quarts 9.5 Liters 10 Year/150,000 Mile Formula) 3.6L Engine and Single or Dual-Zone Climate Control System (Mopar Antifreeze/Engine 13.1 Quarts 12.4 Liters Coolant 10 Year/150,000 Mile Formula) 3.6L Engine and Three-Zone Climate Control System (Mopar Antifreeze/Engine Coolant 14.5 Quarts 13.7 Liters 10 Year/150,000 Mile Formula) * Includes heater and coolant recovery bottle filled to MAX level.

165 FLUIDS AND LUBRICANTS Engine Component Fluid, Lubricant, or Genuine Part We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Engine Coolant Formula OAT (Organic Additive Technology). We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the Engine Oil requirements of FCA Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade. Engine Oil Filter We recommend you use Mopar Engine Oil Filter. Spark Plugs We recommend you use Mopar Spark Plugs. Fuel Selection 87 Octane, 0-15% Ethanol. Fuel Selection – 3.6L Flex Fuel (E-85) Engine – If Equipped 87 Octane, Up To 85% Ethanol.

CAUTION! CAUTION! CAUTION!

TECHNICAL SPECIFICATIONS • This vehicle has not been designed for use • Mixing of engine coolant (antifreeze) other duced into the cooling system in an emer- with propylene glycol-based engine cool- than specified Organic Additive Technol- gency, the cooling system will need to be ant (antifreeze). Use of propylene glycol- ogy (OAT) engine coolant (antifreeze), may drained, flushed, and refilled with fresh based engine coolant (antifreeze) is not result in engine damage and may decrease OAT coolant (conforming to MS.90032), recommended. corrosion protection. Organic Additive by an authorized dealer as soon as pos- Technology (OAT) engine coolant is differ- sible. • Do not use water alone or alcohol-based ent and should not be mixed with Hybrid engine coolant (antifreeze) products. Do Organic Additive Technology (HOAT) en- not use additional rust inhibitors or anti- gine coolant (antifreeze) or any “globally rust products, as they may not be compat- compatible” coolant (antifreeze). If a non- ible with the radiator engine coolant and OAT engine coolant (antifreeze) is intro- may plug the radiator.

166 Chassis Component Fluid, Lubricant, or Genuine Part Use only ATF+4 Automatic Transmission Fluid. Automatic Transmission Failure to use ATF+4 fluid may affect the function or performance of your transmission. We recommend Mopar ATF+4 fluid. Power Transfer Unit (PTU) We recommend you use Mopar Gear Lubricant 75W-90. Rear Drive Assembly (RDA) We recommend you use Mopar Gear Lubricant 75W-90. We recommend you use Mopar DOT 3, SAE J1703. If DOT 3 brake fluid is not available, then DOT Brake Master Cylinder 4 is acceptable. We recommend you use Mopar Power Steering Fluid + 4, or Mopar ATF+4 Automatic Transmission Power Steering Reservoir Fluid.

MOPAR ACCESSORIES • In choosing Authentic Accessories you gain • For the full line of Authentic Dodge Accesso- far more than expressive style, premium pro- ries by Mopar, visit your local dealership or Authentic Accessories By Mopar tection, or extreme entertainment, you also online at mopar.com for U.S. residents and benefit from enhancing your vehicle with ac- mopar.ca for Canadian residents. • The following highlights just some of the many cessories that have been thoroughly tested Authentic Dodge Accessories by Mopar featur- and factory-approved. NOTE: ing a fit, finish, and functionality specifically All parts are subject to availability. for your Dodge Journey.

167 CHROME: • Bodyside Moldings • Fuel Filler Door • Exhaust Tip • Mirror Covers

EXTERIOR: • Fog Lights • Molded Splash Guards • Front Air Deflector • Hitch Receiver

INTERIOR: • Cargo Tray • Slush Mats • Door Sill Guards • Premium Carpet Floor Mats • Katzkin Leather Interiors

ELECTRONICS: • Park Assist • Mopar Web (Wi-Fi) • Electronic Vehicle Tracking System TECHNICAL SPECIFICATIONS

CARRIERS: • Hitch-Mount Bike Carrier • Roof Mount Bike Carrier • Roof Box Cargo Carrier • Roof Mount Ski and Snowboard Carrier • Roof Mount Water Sports Carrier • Roof Mount Canoe Carrier

168 MULTIMEDIA

MULTIMEDIA CYBERSECURITY ...... 170 USB Port ...... 183 Making A Phone Call ...... 196 RADIO 4.3 & 4.3S ...... 171 SD Card (3/3 NAV Only) ...... 184 Receiving A Call — Accept (And End) . . .196 Bluetooth Streaming Audio ...... 184 Radio 4.3 & 4.3S At A Glance ...... 171 Common Phone Commands (Examples) . .196 Radio...... 173 VIDEO ENTERTAINMENT SYSTEM (VES) .....184 Mute (Or Unmute) Microphone During Call ...... 196 Media ...... 175 System Operation...... 184 Operation Of The Remote ...... 185 Transfer Ongoing Call Between Handset And UCONNECT 3/3 NAV WITH 8.4–INCH DISPLAY .177 Vehicle ...... 196 Auxiliary Audio/Video Input Jacks...... 185 Uconnect 3/3 NAV At A Glance ...... 177 Phonebook...... 196 NAVIGATION ...... 185 Radio...... 179 Voice Command Tips (3/3 NAV Only). . . .196 Media ...... 181 Navigation Overview ...... 185 Changing The Volume ...... 196 Main Navigation Menu ...... 188 UCONNECT SETTINGS ...... 182 Voice Text Reply...... 197 Following Your Route ...... 190 General Information ...... 197 STEERING WHEEL AUDIO CONTROLS ...... 183 SiriusXM Travel Link (3 NAV Only) .....191 Right Switch...... 183 UCONNECT VOICE COMMAND (3/3 NAV ONLY). .198 UCONNECT PHONE...... 192 Left Switch ...... 183 Changing The Volume ...... 198 Uconnect Phone (Bluetooth Hands Free PLAYING IPOD/USB/MP3 DEVICES ...... 183 Calling)...... 192 Common Voice Commands (Examples) . .198 Audio Jack (AUX) ...... 183 Pairing A Phone...... 192 Common Navigation Voice Commands . . .198

169 CYBERSECURITY most recent version of vehicle software (such as NOTE: Uconnect software) is installed. • FCA or your dealer may contact you directly Your vehicle may be a connected vehicle and regarding software updates. may be equipped with both wired and wireless WARNING! networks. These networks allow your vehicle to • To help further improve vehicle security and send and receive information. This information • It is not possible to know or to predict all of minimize the potential risk of a security allows systems and features in your vehicle to the possible outcomes if your vehicle’s breach, vehicle owners should: MULTIMEDIA function properly. systems are breached. It may be possible – Routinely check that vehicle systems, including safety re- www.driveuconnect.com/software-update Your vehicle may be equipped with certain se- lated systems, could be impaired or a loss curity features to reduce the risk of unauthor- to learn about available Uconnect soft- of vehicle control could occur that may ized and unlawful access to vehicle systems and ware updates. result in an accident involving serious in- wireless communications. Vehicle software – Only connect and use trusted media de- jury or death. technology continues to evolve over time and vices (e.g. personal mobile phones, • ONLY insert media (e.g., USB, SD card, or FCA US LLC, working with its suppliers, evalu- USBs, CDs). CD) into your vehicle if it came from a ates and takes appropriate steps as needed. trusted source. Media of unknown origin Privacy of any wireless and wired communica- Similar to a computer or other devices, your could possibly contain malicious software, tions cannot be assured. Third parties may un- vehicle may require software updates to im- and if installed in your vehicle, it may prove the usability and performance of your lawfully intercept information and private com- increase the possibility for vehicle systems systems or to reduce the potential risk of unau- munications without your consent. For further to be breached. thorized and unlawful access to your vehicle information, refer to “Onboard Diagnostic Sys- • As always, if you experience unusual ve- systems. tem (OBD II) Cybersecurity” in “Getting To hicle behavior, take your vehicle to your Know Your Instrument Panel” in your Owner’s The risk of unauthorized and unlawful access to nearest authorized dealer immediately. Manual for further information.. your vehicle systems may still exist, even if the

170 RADIO 4.3 & 4.3S Radio 4.3 & 4.3S At A Glance

Radio 4.3 & 4.3S 1 — Radio: AM/FM/SIRIUS Satellite Radio (If Equipped) 2 — Status Bar 3 — Settings: Clock, Display, etc. 4 — Screen OFF/ON 5 — MORE: Uconnect Phone, Compass, Etc. 6 — Player: CD, iPod, USB Device Or AUX Device

171 Displaying The Time Audio Settings Balance/Fade • If the time is not currently displayed at the top • Push the SETTINGS button on the faceplate • Press the “Balance/Fade” button on the of the screen when in Radio mode, push the on the right side of the unit. touchscreen to adjust the sound from the SETTINGS button, then press “Clock.” Select • Then scroll down and press the “Audio” but- speakers. Use the “arrow” button on the “Show Time,” then press “On.” ton on the touchscreen to get to the Audio touchscreen to adjust the sound level from the front and rear or right and left side speakers. Setting The Time menu. MULTIMEDIA Press the center “C” button on the touch- • The Audio Menu shows the following options • Push the SETTINGS button on the faceplate, screen to reset the balance and fade to the for you to customize your audio settings: then press the “Clock” button on the touch- – Equalizer factory setting. Press the “Done” button on screen. – Balance/Fade the touchscreen when done. • Press the “Time” button on the touchscreen. – Speed Adjust Volume Speed Adjust Volume • Press the “Up or Down” buttons on the touch- • Press the “Exit” button on the touchscreen to • Press the “Speed Adjust Volume” button on screen to adjust the hours, minutes or AM/ exit from the Audio Menu. the touchscreen to select between OFF, 1, PM. Equalizer 2 or 3. This will decrease the radio volume relative to a decrease in vehicle speed. Press NOTE: • Press the “Equalizer” button on the touch- the “Done” button on the touchscreen when 12hr format and 24hr format can also be set. screen to adjust the Bass, Mid and Treble. Use done. • Once the time is set press the “Done” button the “+” or “–” button on the touchscreen to on the touchscreen to exit the time screen. adjust the equalizer to your desired settings. Press the “Done” button on the touchscreen when done.

172 Radio 4.3 & 4.3S

Radio 4.3 & 4.3S 1 — Radio Station Presets 5 — Audio Settings 2 — View All Presets 6 — Direct Tune Radio Station 3 — Seek Up 7 — Radio Band 4 — Channel/Station Information 8 — Seek Down

173 • To access the Radio mode, push the RADIO Direct Tune button on the upper left side of the faceplate. • Tune directly to a radio station by pressing the Selecting Radio Stations “Tune” button on the screen, and entering the desired station number. • Press the “Radio band” button on the touchscreen to cycle through AM or FM. SiriusXM Store Radio Presets Manually Satellite Radio is not available.

MULTIMEDIA Your radio can store 12 total preset stations. Seek Up/Seek Down They are shown at the top of your screen. To see • Press the “Seek Arrow” up or down buttons on all 12 stations, press the “All” button on the the touchscreen for less than two seconds to touchscreen. seek through radio stations. To store a radio preset manually, follow the steps • Press and hold either “Seek Arrow” button on below: the touchscreen for more than two seconds to 1. Tune to the desired station. bypass stations without stopping. The radio will stop at the next listenable station once the 2. Press and hold the desired numbered button arrow button on the touchscreen is released. on the touchscreen for more than two seconds or until you hear a confirmation beep.

174 Media 4.3 & 4.3S

Radio 4.3 & 4.3S 1 — Music Source 2 — More: Audio Settings And Shuffle 3 — Current Track Information 4 — Play/Pause 5 — Source: Disc, iPod, AUX Or Bluetooth 6 — Browse Music By: Folder, Artist, Playlist, Song, Album Or Genre

175 • The iPod/CD/AUX controls are accessed by NOTE: pushing the PLAYER button on the faceplate Uconnect will usually automatically switch to to enter the Player main screen, then press the appropriate mode when something is first the “Source” button on the touchscreen and connected or inserted into the system. choose between Disc, AUX, iPod or Bluetooth. • The iPod/USB, CD, Audio Jack, SD Card or Bluetooth source is accessed by pressing the

MULTIMEDIA “Player” button on the touchscreen to enter the Player main screen, then press the “Source” button on the touchscreen and choose between Disc, Aux, iPod, Bluetooth or SD Card.

Source 4.3 & 4.3S

176 UCONNECT 3/3 NAV WITH 8.4–INCH DISPLAY Uconnect 3/3 NAV At A Glance

Radio 3 NAV 1 — Status Bar 6 — Climate Control Button 2 — Small Navigation Map (Uconnect 3 NAV) 7 — Controls Button 3 — More Settings Button 8 — Player Button 4 — Uconnect Phone Button 9 — Radio Button 5 — Garmin Navigation Button (Uconnect 3 NAV)

177 Displaying The Time • Press “+” or “–” next to Set Time Hours and Equalizer Set Time Minutes to adjust the time. • If the time is not currently displayed on the • Press the “Equalizer” button on the touch- radio or player main page, press the “More” • If these features are not available, uncheck screen to activate the Equalizer screen. the “Sync” with GPS box. button on the touchscreen and then press the • Press the “+” or “ –” buttons on the touch- “Settings” button on the touchscreen. In the • Press “X” to save your settings and exit out of screen, or by pressing and dragging over the Settings list, press the “Clock” button on the the Clock Setting screen. level bar for each of the equalizer bands. The

MULTIMEDIA touchscreen, then press the checkbox next to level value, which spans between ±9, is dis- Show Time in Status Bar. Audio Settings played at the bottom of each of the Bands. • Press the “Audio” button on the touchscreen Setting The Time to activate the Audio settings screen to adjust Speed Adjusted Volume • Uconnect 3 NAV synchronizes time automati- Balance\Fade, Equalizer and Speed Adjusted • Press the “Speed Adjusted Volume” button cally via GPS, so should not require any time Volume. adjustment. If you do need to set the time on the touchscreen to activate the Speed • You can return to the Radio screen by pressing manually, follow the instructions below for Adjusted Volume screen. The Speed Adjusted the “X” located at the top right. Uconnect 3. Volume is adjusted by pressing the “+” and “–” buttons or by pressing and dragging over • For Uconnect 3, turn the unit on, then press Balance/Fade the level bar. This alters the automatic adjust- the “Time Display” at the top of the screen. • Press the “Balance/Fade” button on the ment of the audio volume with variation to Press “Yes”. touchscreen to Balance audio between the vehicle speed. • If the time is not displayed at the top of the front speakers or fade the audio between the screen, press “More” button on the touch- rear and front speakers. screen and then “Settings” button on the • Pressing the “Front,” “Rear,” ”Left” or touchscreen. In the Settings screen, press the “Right” buttons on the touchscreen or press “Clock” button on the touchscreen, then and drag the red Speaker Icon to adjust the check or uncheck this option. Balance/Fade.

178 Radio 3/3 NAV

Radio 3/3NAV 1 — Radio Station Presets 5 — Seek Down Button 2 — Toggle Presets 1–6 and 7–12 6 — Direct Tune To A Radio Station 3 — Radio Band Buttons 7 — Seek Up Button 4 — Browse And Manage Stations 8 — Audio Settings Button

179 • To access the Radio mode, push the “Radio” Store Radio Presets Manually button on the touchscreen at the lower left of Your radio can store 12 total preset stations. the screen. They are shown at the top of your screen. To see Selecting Radio Stations all 12 stations, press the “arrow” button on the • Press the desired radio band (AM, FM or SAT) touchscreen at the top right of the screen to button on the touchscreen. toggle between the six presets. MULTIMEDIA Seek Up/Seek Down To store a radio preset manually, follow the steps below: • Press the “Seek arrow” up or down buttons on the touchscreen for less than two seconds to 1. Tune to the desired station. seek through radio stations. 2. Press and hold the desired numbered button • Press and hold either “Seek arrow” button on on the touchscreen for more than two sec- the touchscreen for more than two seconds to onds or until you hear a confirmation beep. bypass stations without stopping. The radio will stop at the next listenable station once the arrow button on the touchscreen is released. Direct Tune • Tune directly to a radio station by pressing the “Tune” button on the screen, and entering the desired station number.

180 Media Models 3/3NAV

Models 3/3NAV 1 — Music Source: Disc, iPod, SD Card, AUX Or Bluetooth 4 — Music Track Information 2 — Repeat Track 5 — Songs In Queue 3 — Shuffle Music Tracks 6 — Browse Music By: Folder, Artist, Playlist, Song, Album Or Genre

181 • The iPod/USB, CD, Audio Jack, SD Card or UCONNECT SETTINGS check-mark appears next to the setting, show- Bluetooth source is accessed by pressing the ing that setting has been selected. The follow- “Player” button on the touchscreen to enter • The Radio 4.3/4.3 S and Uconnect 3/3 NAV ing feature settings are available: the Player main screen, then press the system allows you to access Customer Pro- • Display • Auto On Comfort & “Source” button on the touchscreen and grammable feature settings such as Display, Remote Start choose between Disc, Aux, iPod, Bluetooth or Clock, Safety/Assistance, Lights, Doors & • Clock • Engine Off Options SD Card. Locks, Heated Seats, Engine Off Operation,

MULTIMEDIA • Safety/Assistance • Audio Compass Settings, Audio, Phone/Bluetooth • Lights • Phone/Bluetooth and Sirius Setup through buttons on the • Doors & Locks • Sirius Setup touchscreen.

• On the 4.3/4.3 S radio press the “Settings” Refer to “Uconnect Settings” in “Multimedia” button on the right side of the unit to access in the Owner’s Manual for further information. the Settings screen, use the “Page Up/Down” buttons on the touchscreen to scroll through the following settings. The following feature settings are available: • On the Uconnect 3/3 NAV radio, press the “More” button on the bottom of the touch- Source 3/3NAV screen, then press the “Settings” button on the faceplate to access the Settings screen. NOTE: Uconnect will usually automatically switch to When making a selection, scroll up or down the appropriate mode when something is first until the preferred setting is highlighted, then connected or inserted into the system. press and release the preferred setting until a

182 STEERING WHEEL AUDIO Left Switch • The functions of the portable device are controlled using the device buttons. The volume • Push the switch up or down to search for the CONTROLS may be controlled using the radio or portable next listenable station. The steering wheel audio controls are located on device. • Push the button in the center to select the the rear surface of the steering wheel. next preset station. USB Port PLAYING IPOD/USB/MP3 DEVICES • Connect your iPod or compatible device using a USB cable into the USB Port. The USB Port • There are many ways to play music from iPod/ is contained within the storage bin in the front MP3 players or USB devices through your center stack. USB Memory sticks with audio vehicles sound system. files can also be used. Then, audio from the device can be played on the vehicles sound Audio Jack (AUX) system while providing metadata (artist, track • The Audio Jack, located in the storage bin in title, album, etc.) information on the radio the front center stack, allows a portable de- display. vice, such as an MP3 player or an iPod, to be • When connected, the iPod/compatible USB plugged into the radio and utilize the vehicles device can be controlled using the radio or sound system, using a 3.5 mm audio cable, to Steering Wheel Audio Controls to play, skip to amplify the source and play through the ve- the next or previous track, browse, and list the hicle speakers. Steering Wheel Audio Controls contents. • Pressing the “Player” button on the touch- Right Switch screen, and then choose AUX source will • The iPod battery charges when plugged into change the mode to auxiliary device if the the USB port (if supported by the specific • Push the switch up or down to increase or Audio Jack is connected, allowing the music device). decrease the volume. from your portable device to be heard through • Push the button in the center to change the vehicles speakers. modes AM/FM/CD/SAT. 183 NOTE: SD Card (3/3 NAV Only) VIDEO ENTERTAINMENT SYSTEM • When connecting your iPod device for the first • Play songs stored on an SD card inserted into (VES) time, the system may take several minutes to the SD card slot, located on the radio face- read your music, depending on the number of plate. System Operation files. For example, the system will take ap- • Song playback can be controlled using the • The screen is located on the headliner behind proximately five minutes for every radio or Steering Wheel Audio Controls to play, the front seat. To lower the screen, press the MULTIMEDIA 1,000 songs loaded on the device. Also dur- skip to the next or previous track, browse, and release button located in the rear of the over- ing the reading process, the Shuffle and list the contents. head console. Browse functions will be disabled. This process is needed to ensure the full use of your Bluetooth Streaming Audio • The system may be controlled by the front iPod features and only happens the first time • If equipped with Uconnect Voice Command, seat occupants using the touchscreen radio, it is connected. After the first time, the read- your Bluetooth - equipped iPod devices, cell or by the rear seat occupants using the remote ing process of your iPod will take considerably phones or other media players, may also be control. less time unless changes are made or new able to stream music to your vehicles sound • The video screen displays information in a songs are added to the playlist. system. Your connected device must be split-screen format. The left side of the screen • The USB port supports certain Mini, Classic, Bluetooth - compatible, and paired with your is referred to as Channel 1 and the right side Uconnect system (see Uconnect Phone for Nano, Touch, and iPhone devices. The USB of the screen is referred to as Channel 2. All pairing instructions). You can access the mu- port also supports playing music from com- modes except video modes are displayed in a sic from your connected Bluetooth device by patible external USB Mass Storage Class split-screen format. pressing the “Source” button on the touch- memory devices. Some iPod software versions screen while in Player mode. • To use the headphones, press the power but- may not fully support the USB port features. ton located on the right ear cup. Select the Please visit Apple’s website for iPod software channel on the headphones (1 or 2) that updates. corresponds to the channel selected on the VES screen.

184 Operation Of The Remote Auxiliary Audio/Video Input Jacks Navigation Overview The remote control operates similarly to any • The Aux jacks are located on the rear of the Uconnect 3/3 NAV With 8.4–inch Display Radio DVD remote you have used before and allows center console. integrates Garmin’s consumer-friendly naviga- the rear seat passengers to change stations, • Connect the video game or other external tion into your vehicle. Garmin Navigation in- tracks, discs and audio/video modes and is media devices to the AUX jacks following the cludes Lane Assist and Junction View, Speed designed to control either channel by using the color coding for VES jacks. Limit information, and a database with over six million points of interest. selector switch located on the right side of the • Using either the touchscreen radio or remote remote. control, select AUX from the Rear VES Control • Press the “Nav” button on the touchscreen in the menu bar to access the Navigation • Select an audio channel (Rear 1 for driver's or Mode Selection screen. system. side rear screen and Rear 2 for passenger's • Refer to your vehicle's Owner’s Manual for side rear screen), then press the “source” further details. Changing The Navigation Voice Prompt Volume button and using the up and down arrows, 1. Program a destination. highlight disc from the menu and press the NAVIGATION “OK” button. 2. While traveling on your route, press the up- • The information in the section below is only per left area of the map screen where your • Press the popup/menu button to navigate the applicable if you have the Uconnect 3NAV next turn is displayed. disc menu and options. system or the Navigation has been activated 3. The Navigation system will then repeat the on your Uconnect 3 with 8.4–inch display Pressing the MODE button causes the Mode system. distance to your next turn. Selection menu to appear on the VES screen. 4. While the Navigation system is speaking, Press the “Nav” button on the touchscreen in Use the remote control arrow buttons to scroll use the ON/OFF VOLUME rotary knob to the menu bar to access the Navigation system. through the available modes, then press ENTER adjust the volume to a comfortable level. to select the desired mode. Please note the volume setting for Naviga- Pressing the power button will turn the VES tion Voice Prompt is different than the audio system ON/OFF. system.

185 Main Navigation Menu MULTIMEDIA

Main Navigation Menu Touchscreen 1 — Where To? Button 4 — Tools Button 2 — View Map Button 5 — Detour Button 3 — Settings Button 6 — Stop Button

186 Acquiring Satellites Finding A Place By Spelling The Name Setting Or Changing Your Home Location • The GPS Satellite strength bars indicate the • From the Main Navigation Menu press “Where • Press the “Nav” button on the touchscreen in strength of your satellite reception. to?” press “Points of Interest” and then press the menu bar to access the Navigation system • Acquiring satellite signals can take a few min- “Spell Name.” and the Main Navigation menu. utes. When at least one of the bars is green, • Enter the name of your destination. • Press “Where To?” then press “Go Home.” your device has acquired satellite signals. If no signal is found, the Navigation system still • Press “Done.” • You may enter your address directly, use your can operate with internal gyro direction & • Select your destination and press “Go.” current location as your home address, or location based on data provided by the ve- choose from recently found locations. Entering A Destination Address hicle. • To edit your Home location (or other saved • Dead Reckoning technology uses the speed • From the main Navigation menu, press locations), press “Where To?” from the Main sensors attached to your vehicle’s drivetrain, “Where To?” then press “Address.” Navigation menu, press “Favorites,” then and a gyroscope, to supplement the existing • Follow the on-screen prompts to enter the press the location you want to edit. After GPS data. The combined data provides accu- address and press “Go.” selecting a location to edit, press “Press for rate positioning for your vehicle in tunnels, More,” then “Edit.” indoor parking garages, urban canyons, and Searching Near Another Location Go Home any other area where GPS signals can become • From the main Navigation menu, press obstructed. “Where To?” Press a destination and press • A Home location must be saved in the system. Finding Points Of Interest “Near.” From the Main Navigation menu, press “Where To?” then press “Go Home.” • From the main Navigation menu, press • Select an option from the available choices. “Where To?” then press “Points of Interest.” • Select a Category, then a subcategory if necessary. • Select your destination and press “Go.”

187 Main Navigation Menu MULTIMEDIA

Main Navigation Menu Touchscreen 1 — Where To? Button 4 — Tools Button 2 — View Map Button 5 — Detour Button 3 — Settings Button 6 — Stop Button

188 Acquiring Satellites Finding A Place By Spelling The Name Setting Or Changing Your Home Location • The GPS Satellite strength bars indicate the • From the Main Navigation Menu press “Where • Press the “Nav” button on the touchscreen in strength of your satellite reception. to?” press “Points of Interest” and then press the menu bar to access the Navigation system • Acquiring satellite signals can take a few min- “Spell Name.” and the Main Navigation menu. utes. When at least one of the bars is green, • Enter the name of your destination. • Press “Where To?” then press “Go Home.” your device has acquired satellite signals. If • Press “Done.” • You may enter your address directly, use your no signal is found, the Navigation system still • Select your destination and press “Go.” current location as your home address, or can operate with internal gyro direction & choose from recently found locations. location based on data provided by the ve- Entering A Destination Address hicle. • To edit your Home location (or other saved • From the main Navigation menu, press locations), press “Where To?” from the Main • Dead Reckoning technology uses the speed “Where To?” then press “Address.” Navigation menu, press “Favorites,” then sensors attached to your vehicle’s drivetrain, press the location you want to edit. After and a gyroscope, to supplement the existing • Follow the on-screen prompts to enter the address and press “Go.” selecting a location to edit, press “Press for GPS data. The combined data provides accu- More,” then “Edit.” rate positioning for your vehicle in tunnels, Searching Near Another Location indoor parking garages, urban canyons, and Go Home • From the main Navigation menu, press any other area where GPS signals can become • A Home location must be saved in the system. obstructed. “Where To?” Press a destination and press “Near.” From the Main Navigation menu, press Finding Points Of Interest “Where To?” then press “Go Home.” • Select an option from the available choices. • From the main Navigation menu, press “Where To?” then press “Points of Interest.” • Select a Category, then a subcategory if necessary. • Select your destination and press “Go.”

189 Following Your Route MULTIMEDIA

Following Your Route 1 — Distance To Next Turn 6 — Press And Drag Map 2 — Current Location 7 — Your Location On The Map 3 — Zoom In Button 8 — Estimated Time Of Arrival 4 — Zoom Out Button 9 — Return Button 5 — Current Speed

190 • Your route is marked with a magenta line on Taking A Detour the map. If you depart from the original route, • To take a detour you must be navigating a your route is recalculated. A speed limit icon route. could appear as you travel on major roadways. • Press “Detour.” • Lane Assist helps you decide which lane to be in at upcoming junctions. NOTE: • Junction View gives you an expanded view as If the route you are currently taking is the only junctions approach. reasonable option, the device might not calcu- Adding A Via Point late a detour. SiriusXM Travel Link—3NAV • To add a stop between your current location SiriusXM Travel Link (3 NAV Only) and your end destination, you must be navi- • SiriusXM Travel Link is only available in the 1 – Fuel gating a route. View detailed price information for fuel United States. Prices stations near your current location. • Press the “back arrow” multiple times to re- • SiriusXM Travel Link brings a wealth of useful 2 – Movie View information on movies that turn to the Main Navigation menu. are playing at theaters near your information into your vehicle and right to your Listings current location. • Press “Where To?” then search for the via fingertips. point. Select the via point to add from the 3 – Sports View scores and upcoming events search results. • To access Travel Link, press the “More” but- Scores for all major sports. ton on the touchscreen, then the “Travel Link” 4–View subscription information. • Press “Go,” then press “Add as a Via Point.” button on the touchscreen. SiriusXM 5–MyFa- View and store your favorite loca- NOTE: vorites tion, theater and sport teams for SiriusXM Travel Link requires a subscription, quick access. sold separately after the one year trial subscrip- 6–View detailed weather conditions, tion included with your vehicle purchase. Weather forecasts and ski/snowboarding conditions at local resorts.

191 UCONNECT PHONE Pairing A Phone • Models 3/3 NAV: Press the “Phone” button on the touchscreen and then the “Settings” but- • To use the Uconnect Phone feature, you must Uconnect Phone (Bluetooth Hands Free ton on the touchscreen. Next, press “Add first pair your Bluetooth phone with the Calling) Device.” Uconnect system. • If the Uconnect Phone Button exists on your steering wheel, then you have the Start Pairing Procedure On The Radio

MULTIMEDIA Uconnect Phone features. • Models 4.3, 4.3S: Push the MORE button on • The Uconnect Phone is a voice-activated, the faceplate, then press the “Phone” button hands-free, in-vehicle communications sys- on the touchscreen. Next, press the “Set- tem with Voice Command Capability (see tings” button on the touchscreen and then Voice Command section). “Add Device.” • The Uconnect Phone allows you to dial a phone number with your mobile phone using simple voice commands or using touchscreen buttons. • Refer to “Voice Command” in “Multimedia” Models 3/3 NAV in your Owner's Manual for further details. • Uconnect Phone will display an “In progress” NOTE: screen while the system is connecting. The Uconnect Phone requires a mobile phone equipped with the Bluetooth Hands-Free Pro- file, Version 1.0 or higher. For Uconnect customer support: U.S. residents - visit Models 4.3 & 4.3S UconnectPhone.com or call 1-877-855-8400. Canadian Residents - call 1-800-465-2001 (English) or 1-800-387-9983 (French).

192 Start Pairing Procedure On Mobile Phone • If your phone asks you to accept a connection request from Uconnect, select “Yes.” If avail- • Search for available devices on your Bluetooth able, check the box telling it not to ask again – enabled mobile phone. This is usually within that way your phone will automatically con- Settings or Options under “Bluetooth.” See nect each time you start the vehicle. your mobile phone’s manual for details. NOTE: • When your phone finds the system, select Refer to UconnectPhone.com website for addi- “Uconnect” as the paired device. tional information on phone pairing and for a list of compatible phones. Select The Mobile Phone's Priority Level Models 3/3 NAV • When the pairing process has successfully 1 — Name That Appears On Mobile completed, the system will prompt you to Phone choose whether or not this is your favorite 2 — 4-Digit PIN To Be Entered On Mo- phone. Selecting “Yes” will make this phone bile Phone the highest priority. This phone will take pre- cedence over other paired phones within range. Only one phone can connected at a Models 4.3 & 4.3S time. Complete The Pairing Procedure • You are now ready to make hands-free calls. Push the Uconnect Phone button on your • When prompted on the phone, enter the steering wheel to begin. 4-digit PIN number shown on the Uconnect Screen.

193 MULTIMEDIA

Phone Menu Screen — Models 4.3 & 4.3S 1 — Redial Last Number 7 — Manage Paired Phones 2 — Phone Signal 8 — Conference Call 3 — Current Phone 9 — Direct Dial 4 — Phone Battery Level 10 — Recent Call List 5 — Mute Microphone 11 — Browse Phone Book (Contains 911) 6 — Transfer Radio/Phone 12 — End Call

194 Phone Menu Screen — Models 3/3 NAV 1 — Favorite Phonebook Entries 8 — Manage Paired Phones 2 — Phone Battery Level 9 — SMS (text messaging) 3 — Current Phone 10 — Direct Dial 4 — Phone Signal 11 — Recent Call List 5 — Mute Microphone 12 — Browse Phone Book (Contains 911) 6 — Transfer Radio/Phone 13 — End Call 7 — Conference Call 14 — Hold/Redial Last Number

195 Making A Phone Call Mute (Or Unmute) Microphone During Call • Favorite phonebook entries can be saved as Favorites for quicker access. Favorites are • During a call, press the “mute” button on the To begin a phone call using Uconnect Voice shown at the top of your main phone screen. Command: touchscreen to mute and unmute the call. Voice Command Tips (3/3 NAV Only) • Push the Uconnect Phone button . Transfer Ongoing Call Between Handset • Using complete names (i.e; Call John Doe vs. • After the BEEP, say “dial” then the number And Vehicle Call John) will result in greater system accu- MULTIMEDIA (or “call” then the name as listed in your During an on-going call, press the “Transfer” racy. phone; see Phonebook). button on the touchscreen to transfer an on- • You can “chain” commands together for NOTE: going call between handset and vehicle. faster results. Say “Call John Doe mobile,” for You can also initiate a call by using the touch- example. Phonebook screen on the Phone main screen. • If you are listening to available voice com- • Uconnect radios will automatically download Receiving A Call — Accept (And End) mand options, you do not have to listen to the your phonebook from your paired phone, if entire list. When you hear the command that • When an incoming call rings/is announced on this feature is supported by your phone. En- you need, press the button on the Uconnect, push the Phone button . tries are updated each time that the phone is steering wheel, wait for the beep and say your connected. If your phone book entries do not • To end a call, push the Phone button . command. appear, check the settings on your phone. Common Phone Commands (Examples) Some phones require you to enable this fea- Changing The Volume ture manually. • Start a dialogue by pressing the Phone button • “Call John Smith” • Your phonebook can be browsed on your radio , then say a command for example - • “Call John Smith mobile” screen, but editing can only be done on your "Help." • “Dial 1 248 555 1212” phone. To browse, press the “Phone” button • Use the radio ON/OFF VOLUME rotary knob to • “Call Emergency” on the touchscreen, then the “Phonebook” adjust the volume to a comfortable level while button on the touchscreen. the Uconnect system is speaking. Please note • “Call Towing Assistance” the volume setting for Uconnect is different • “Redial” than the audio system. 196 NOTE: NOTE: General Information To access help, press the Uconnect Phone • For mobile phone compatibility and pairing The following regulatory statement applies to all button on the steering wheel and say "help." instructions, please visit Radio Frequency (RF) devices equipped in this Press the display or push either or UconnectPhone.com. vehicle: button and say "cancel" to cancel the help • Uconnect Phone Voice Text Reply is only avail- session. able when the vehicle is not moving. This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt Voice Text Reply WARNING! RSS standard(s). Operation is subject to the • Uconnect Phone can read or send new text following two conditions: messages on your mobile phone. • Any voice commanded system should be 1. This device may not cause harmful interfer- • Your mobile phone must support Voice Text used only in safe driving conditions follow- ence, and Reply over Bluetooth to use this feature. If the ing applicable laws regarding phone use. 2. This device must accept any interference Uconnect Phone determines your mobile Your attention should be focused on safely received, including interference that may phone is not compatible with Voice Text Reply operating the vehicle. Failure to do so may cause undesired operation. messaging over Bluetooth, the “Messaging” result in a collision causing you and others to be severely injured or killed. button will be greyed out and the feature will NOTE: • In an emergency, to use Uconnect Phone, not be available for use. your mobile phone must be: Changes or modifications not expressly ap- • turned on proved by the party responsible for compliance • paired to Uconnect Phone could void the user’s authority to operate the • have network coverage equipment.

197 UCONNECT VOICE COMMAND Changing The Volume SiriusXM Sat- “39” (3/3 NAV ONLY) • Start a dialogue by pressing the Voice Com- ellite Radio “Foxxhole” mand button , then say a command (for SiriusXM “Show fuel prices” • If the Uconnect Voice Command button example, “help”). Travel Link “Show movie listings” exists on your steering wheel, then you have “Show current weather” the Voice Command feature. • Use the radio ON/OFF VOLUME rotary knob to “Show extended weather” adjust the volume to a comfortable level while “Show Travel Link favorites”

MULTIMEDIA • The Voice Command feature lets you keep the Voice Command system is speaking. The “Show NFL headlines” your hands on the steering wheel, and your “Show NBA rankings” volume setting for Voice Command is different eyes on the road. “Show NFL schedules” than the audio system. “Show NBA scores” • When you press the Voice Command button • Refer to the Uconnect Owner’s Manual Navigation “Navigate to (Address)” located on the radio faceplate or steer- Supplement for further details. “Navigate to (Point of Interest)” ing wheel, you will hear a beep. The beep is your signal to give a command. If you do not Common Voice Commands (Examples) know what commands to say, you can say NOTE: "help" and the system will provide options to Switch Modes “FM” For the shortened SiriusXM Satellite Radio “Satellite” “AM” you. If you ever wish to interrupt the system mode commands to be recognized you must be “Change Source to iPod” in that mode. For example, if you are in while it lists options, press the Voice Com- “Change Source to SD Card” mand button , listen for the BEEP, and SiriusXM Satellite Radio mode you can say Radio (FM, “95.5” say your command. AM) “95.5 FM” “39,” but if you are not in SiriusXM mode, you • You can “chain” commands together for “Go to preset 5” would need to say “Tune to Satellite Channel faster results. Say “Play the artist Scott Jop- Player “Play Album 'Greatest Hits” 39.” lin”, for example. “Play Artist 'Scott Joplin” “Play Genre 'Rock” “Play Song Common Navigation Voice Commands 'Maple Leaf Rag” • To access the navigation voice commands, press the Uconnect Voice Command button while in any mode and say “Naviga- tion.” 198 • Once in the Navigation feature, you can sim- The following chart lists the navigation voice ply Say What You See on the touchscreen to commands that may be available. WARNING! give a navigation voice command. Navigation Voice Commands: Any voice commanded system should be • Locating an address can be given as a one “Find Nearest Transit” used only in safe driving conditions following shot entry. For example, after saying “Find “Find Nearest Lodg- applicable laws regarding phone use. Your ing” attention should be focused on safely oper- Address” and the system is ready, you can say “Where To?” (Main “Find Nearest Shop- ating the vehicle. Failure to do so may result the entire address in one command, Menu command) ping” in a collision causing you and others to be “View Map” (Main “Find Nearest Bank” “1234 1st Street, Any Town, Michigan.” If severely injured or killed. you are searching for a particular address or Menu command) “Find Nearest Park- “Repeat guidance” ing” Point Of Interest, the available voice com- “Cancel Route” “De- “Find Nearest Enter- mands depend on what is displayed on the tour” (During a Route tainment” touchscreen. Guidance) “Find Nearest Recre- “Where Am I?” ation” • When the Voice Command system is ready to “Find Address” “Find Nearest Attrac- be given a command, the green indicator is “Go Home” tions” visible in the right corner of the touchscreen. “Find Place by Cat- “Find Nearest Hospi- egory” tals” “Find Place by Name” “Find Nearest Com- “Find Recently munity” Found” “Find Nearest Auto “Find Favorite” Services” “Find City” “Find Nearest Airport” “Find Nearest Restau- “Find Nearest Police rant” Stations” “Find Nearest Fuel” “Find Nearest Fire Stations” Voice Command “Ready” “Find Nearest Auto Dealers”

199 200 CUSTOMER ASSISTANCE

CUSTOMER ASSISTANCE IF YOU NEED ASSISTANCE ...... 202 Customer Assistance For The Hearing Or In The 50 United States And Washington, FCA US LLC Customer Center...... 202 Speech Impaired (TDD/TTY)...... 203 D.C...... 204 FCA Canada Inc. Customer Center .....202 Service Contract ...... 203 In Canada ...... 204 In Mexico Contact ...... 202 REPORTING SAFETY DEFECTS ...... 204 PUBLICATION ORDER FORMS ...... 204 Puerto Rico And U.S. Virgin Islands . . . .202

201 IF YOU NEED ASSISTANCE Any communication to the manufacturer's cus- In Mexico Contact tomer center should include the following infor- Av. Prolongacion Paseo de la Reforma, 1240 The manufacturer and its authorized dealer are mation: vitally interested in your satisfaction. We want Sante Fe C.P. 05109 you to be happy with our products and services. • Owner's name and address Warranty service must be done by an authorized • Owner's telephone number (home and office) Mexico, D. F. dealer. We strongly recommend that you take the • Authorized dealer name In Mexico City: 5081-7568 vehicle to an authorized dealer. They know your vehicle the best, and are most concerned that you • Vehicle Identification Number (VIN) Outside Mexico City: 1-800-505-1300 get prompt and high quality service. The manufac- • Vehicle delivery date and mileage turer's authorized dealer have the facilities, factory- Puerto Rico And U.S. Virgin Islands trained technicians, special tools, and the latest FCA US LLC Customer Center Customer Service Chrysler International Ser- information to ensure the vehicle is fixed correctly vices LLC and in a timely manner. P.O. Box 21–8004 CUSTOMER ASSISTANCE This is why you should always talk to an autho- P.O. Box 191857 Auburn Hills, MI 48321–8004 rized dealer service manager first. Most matters San Juan 00919-1857 can be resolved with this process. Phone: (800) 423-6343 Tel.: (888) 242-6342 • If for some reason you are still not satisfied, FCA Canada Inc. Customer Center talk to the general manager or owner of the Fax: (787) 782-3345 authorized dealer. They want to know if you P.O. Box 1621 need assistance. Windsor, Ontario N9A 4H6 • If an authorized dealer is unable to resolve the concern, you may contact the manufacturer's Phone: (800) 465-2001 English / (800) 387- customer center. 9983 French

202 Customer Assistance For The Hearing Or manufacturer stands behind only the manufac- We appreciate that you have made a major Speech Impaired (TDD/TTY) turer's service contracts. If you purchased a investment when you purchased the vehicle. An manufacturer's service contract, you will receive authorized dealer has also made a major invest- To assist customers who have hearing difficul- Plan Provisions and an Owner Identification ment in facilities, tools, and training to assure ties, the manufacturer has installed special Card in the mail within three weeks of the that you are absolutely delighted with the own- TDD (Telecommunication Devices for the Deaf) vehicle delivery date. If you have any questions ership experience. You will be pleased with their equipment at its customer center. Any hearing about the service contract, call the manufactur- sincere efforts to resolve any warranty issues or or speech impaired customer, who has access to er's Service Contract National Customer Hotline related concerns. a TDD or a conventional teletypewriter (TTY) in the United States, can communicate with the at 1-800-521-9922 (Canadian residents, call manufacturer by dialing 1-800-380-CHRY. (800) 465-2001 English / (800) 387- WARNING! 9983 French). Canadian residents with hearing difficulties that Engine exhaust (internal combustion en- require assistance can use the special needs The manufacturer will not stand behind any gines only), some of its constituents, and relay service offered by Bell Canada. For TTY service contract that is not the manufacturer's certain vehicle components contain, or emit, teletypewriter users, dial 711 and for Voice service contract. It is not responsible for any chemicals known to the State of California to callers, dial 1-800-855-0511 to connect with a service contract other than the manufacturer's cause cancer and birth defects, or other re- Bell Relay Service operator. service contract. If you purchased a service productive harm. In addition, certain fluids contract that is not a manufacturer's service contained in vehicles and certain products of Service Contract contract, and you require service after the component wear contain, or emit, chemicals known to the State of California to cause You may have purchased a service contract for a manufacturer's New Vehicle Limited Warranty cancer and birth defects, or other reproduc- vehicle to help protect you from the high cost of expires, please refer to the contract documents, tive harm. unexpected repairs after the manufacturer's and contact the person listed in those docu- New Vehicle Limited Warranty expires. The ments.

203 REPORTING SAFETY DEFECTS trator, NHTSA, 1200 New Jersey Av- select the “Owner’s Manual and Glove Com- enue, SE., West Building, Washington, partment Material” from the left menu. You In The 50 United States And Washington, D.C. 20590. You can also obtain other can also purchase a copy by calling 1-800-423-6343 (U.S.) or D.C. information about motor vehicle safety 1-800-387-1143 (Canada). from http://www.safercar.gov. If you believe that your vehicle has a • Replacement User Guide kits or, if you prefer, defect that could cause a crash or cause In Canada additional printed copies of the Owner's injury or death, you should immediately Manual, Warranty Booklet or Radio Manuals If you believe that your vehicle has a inform the National Highway Traffic may be purchased by visiting safety defect, you should contact the Safety Administration (NHTSA) in addi- www.techauthority.com or by calling Customer Service Department immedi- 1-800-890-4038 (U.S.) or tion to notifying FCA US LLC. ately. Canadian customers who wish to 1-800-387-1143 (Canada). Visa, Master If NHTSA receives similar complaints, it report a safety defect to the Canadian Card, American Express and Discover orders CUSTOMER ASSISTANCE are accepted. may open an investigation, and if it finds government should contact Transport that a safety defect exists in a group of Canada, Motor Vehicle Defect Investiga- NOTE: vehicles, it may order a recall and rem- tions and Recalls at 1-800-333-0510 • The Owner's Manual and User Guide elec- edy campaign. However, NHTSA cannot or go to http://www.tc.gc.ca/roadsafety/. tronic files are also available on the Chrysler, become involved in individual problems Jeep, Ram Truck, Dodge and SRT websites. between you, your authorized dealer or PUBLICATION ORDER FORMS • Click on the “For Owners” tab, select “Owner/ FCA US LLC. • You can purchase a copy of the Owner's Service Manuals”, then select your desired model year and vehicle from the drop down To contact NHTSA, you may call the Vehicle Manual, Navigation/Uconnect Manuals or Warranty Booklet. United States customers lists. Safety Hotline toll free at 1-888-327-4236 may visit the Dodge Contact Us page at (TTY: 1-800-424-9153); or go to http:// www.dodge.com scroll to the bottom of the www.safercar.gov; or write to: Adminis- page and select the “Contact Us” link, then

204 INDEX

Accessories ...... 167 Arming System (Security Alarm) ...... 15 Chart, Tire Sizing ...... 146 Mopar ...... 167 Automatic Headlights ...... 27 Checking Your Vehicle For Safety ...... 103 Adding Fuel ...... 113 Automatic Transmission Checks, Safety ...... 103 Additives, Fuel ...... 113 Adding Fluid ...... 167 Child Restraint ...... 87 AirBag...... 79 Fluid Type ...... 167 Child Restraints Air Bag Operation ...... 81 Auxiliary Electrical Outlet (Power Outlet) . .47 Booster Seats ...... 91 Air Bag Warning Light ...... 78 Auxiliary Power Outlet ...... 47 Child Restraints ...... 87 Driver Knee Air Bag ...... 81 Child Seat Installation ...... 99 Enhanced Accident Response . . .85, 136 Battery...... 57 How To Stow An Unused ALR Seat Belt .97 Event Data Recorder (EDR) ...... 136 Charging System Light ...... 57 Infants And Child Restraints ...... 88 If A Deployment Occurs ...... 84 Belts, Seat...... 104 Locating The LATCH Anchorages ....95 Knee Impact Bolsters ...... 81 B-Pillar Location ...... 149 Lower Anchors And Tethers For Children .93 Maintaining Your Air Bag System ....86 Brake Fluid ...... 167 Older Children And Child Restraints . . .89 Side Air Bags ...... 81 Brake System Seating Positions ...... 92 Transporting Pets ...... 103 Fluid Check ...... 167 Using The Top Tether Anchorage . . . .101 Air Bag Light ...... 55, 78, 104 Warning Light ...... 55 Cleaning Air Bag Maintenance...... 86 Bulb Replacement ...... 124 Wheels ...... 159 Air Conditioning Filter ...... 41 Bulbs, Light ...... 106, 124 Compact Spare Tire ...... 157 Air Conditioning, Operating Tips ...... 41 Contract, Service ...... 203 Air Pressure, Tires ...... 152 Camera, Rear ...... 111 Cooling System Alarm, Panic ...... 12 Capacities, Fluid ...... 165 Coolant Capacity ...... 165 Alarm (Security Alarm) ...... 15, 56 Caps, Filler Selection Of Coolant (Antifreeze) .165, 166 Alarm System (Security Alarm) ...... 15 Oil (Engine) ...... 143 Cruise Light ...... 61 Antifreeze (Engine Coolant) ...... 165 Carbon Monoxide Warning...... 103 Customer Assistance ...... 202 Anti-Lock Warning Light...... 61 Changing A Flat Tire ...... 118, 145 205 Customer Programmable Features .....182 Jump Starting ...... 130 Folding Rear Seat ...... 18, 21 Oil...... 165, 166 Freeing A Stuck Vehicle ...... 133 Defroster, Windshield ...... 104 Oil Filler Cap ...... 143 Fuel INDEX Delay (Intermittent) Wipers ...... 28 Oil Selection ...... 165 Additives ...... 113 Diagnostic System, Onboard ...... 62 Overheating ...... 132 Ethanol ...... 164 Dimmer Switch, Headlight ...... 27 Enhanced Accident Response Feature.85, 136 Materials Added ...... 113 Disabled Vehicle Towing ...... 135 Ethanol ...... 164 Octane Rating ...... 166 Door Ajar ...... 58 Exhaust Gas Caution ...... 103 Specifications ...... 166 Door Ajar Light ...... 58 Exhaust System...... 103 Tank Capacity ...... 165 Driver's Seat Back Tilt ...... 18 Exterior Lighting ...... 26 Fuel, Flexible ...... 164 Exterior Lights ...... 26, 106 Fueling...... 113 E-85 Fuel ...... 164 Fuses...... 126 Electrical Outlet, Auxiliary (Power Outlet) . .47 Filters Electrical Power Outlets ...... 47 Air Conditioning ...... 41 Garage Door Opener (HomeLink) ...... 44 Electronic Speed Control (Cruise Control) .108 Engine Oil ...... 166 Gear Select Lever Override ...... 133 Electronic Throttle Control Warning Light . .57 Flashers Emergency, In Case Of Turn Signal ...... 27, 61, 106 Headlights Freeing Vehicle When Stuck ...... 133 Flexible Fuel Vehicles Automatic ...... 27 Jacking ...... 118, 145 Fuel Requirements ...... 164 High Beam ...... 27 Jump Starting ...... 130 Fluid, Brake ...... 167 High Beam/Low Beam Select Switch . .27 Towing ...... 135 Fluid Capacities...... 165 On With Wipers ...... 27 Engine ...... 143 Fluid Leaks ...... 106 Switch ...... 26 Break-In Recommendations ...... 108 Fluid Level Checks Head Restraints ...... 22 Compartment ...... 143, 144 Brake ...... 167 Heated Mirrors ...... 26 Compartment Identification ...... 144 Power Steering ...... 167 High Beam/Low Beam Select (Dimmer) Coolant (Antifreeze) ...... 166 Fluids And Lubricants ...... 166 Switch ...... 27 Exhaust Gas Caution ...... 103 Fog Lights...... 27 HomeLink (Garage Door Opener) ...... 44 206 Hood Prop...... 43 Left Switch Warning (Instrument Cluster Hood Release ...... 43 Steering Wheel Audio Controls .....183 Description) ...... 56, 61 Life Of Tires ...... 155 Loading Vehicle Instrument Cluster ...... 61 Liftgate Window Wiper/Washer ...... 29 Tires ...... 149 Interior Fuses ...... 126 Light Bulbs ...... 106, 124 Low Tire Pressure System ...... 64 Intermittent Wipers (Delay Wipers)...... 28 Lights ...... 106 Lug Nuts...... 164 Introduction ...... 1 AirBag ...... 55, 78, 104 Inverter, Power ...... 50 Automatic Headlights ...... 27 Malfunction Indicator Light (Check Engine).58 iPod/USB/MP3 Control .....175, 181, 183 Brake Warning ...... 55 Manual, Service...... 204 Bluetooth Streaming Audio ...... 184 Bulb Replacement ...... 124 Memory Feature (Memory Seat) ...... 18 Cruise ...... 61 Memory Seat ...... 18 Jacking Instructions ...... 120 Dimmer Switch, Headlight .....26, 27 Memory Seats And Radio ...... 18 Jack Location ...... 118 Engine Temperature Warning ...... 56 Mirrors ...... 26 Jack Operation ...... 118, 120, 145 Exterior ...... 106 Heated ...... 26 Jump Starting ...... 130 Fog ...... 27 Monitor, Tire Pressure System ...... 64 Headlights ...... 26 Mopar ...... 167 Key Fob Headlights On With Wipers ...... 27 Mopar Accessories ...... 167 Panic Alarm ...... 12 Headlight Switch ...... 26 Multi-Function Control Lever ...... 26 Keyless Enter-N-Go ...... 16 High Beam ...... 27 Keys ...... 11 Instrument Cluster ...... 26 Navigation ...... 185 Malfunction Indicator (Check Engine) .58 Navigation Voice Commands ...... 198 Lane Change And Turn Signals ...... 27 Park ...... 61 Navigation Voice Prompt Volume ...... 198 Lane Change Assist ...... 28 Seat Belt Reminder ...... 55 New Vehicle Break-In Period ...... 108 Lap/Shoulder Belts...... 70 Security Alarm ...... 56 Latches ...... 106 Service ...... 124 Occupant Restraints ...... 68 Hood ...... 43 Tire Pressure Monitoring (TPMS) . .59, 64 Octane Rating, Gasoline (Fuel) ...... 166 Leaks, Fluid ...... 106 Turn Signal ...... 26, 27, 61, 106 Oil, Engine...... 166 207 Capacity ...... 165 Pretensioners Safety Checks Inside Vehicle ...... 104 Filter ...... 166 Seat Belts ...... 74 Safety Checks Outside Vehicle ...... 106 Pressure Warning Light ...... 57 Safety Defects, Reporting ...... 204 INDEX Recommendation ...... 165 Radial Ply Tires ...... 153 Safety, Exhaust Gas ...... 103 Viscosity ...... 165 Radio Safety Information, Tire ...... 145 Oil Pressure Light ...... 57 Presets ...... 173, 179 Safety Tips...... 103 Onboard Diagnostic System...... 62 Radio Frequency Seat Belt Operating Precautions ...... 62 General Information ...... 12, 14 Adjustable Upper Shoulder Belt Overheating, Engine ...... 132 Radio Operation ...... 173, 179 Anchorage ...... 73 Owner's Manual (Operator Manual).....204 Radio (Sound Systems) ...... 171, 177 Lap/Shoulder Belt Operation ...... 72 Rear Camera ...... 111 Lap/Shoulder Belts ...... 70 Panic Alarm...... 12 Rear ParkSense System ...... 110 Lap/Shoulder Belt Untwisting ...... 73 ParkSense System, Rear...... 110 Rear Seat, Folding ...... 18, 21 Pregnant Women ...... 74 Passenger Seat Back Tilt (Easy Entry Rear Wiper/Washer ...... 29 Seat Belt Extender ...... 74 System) ...... 20 Reclining Rear Seats...... 21 Seat Belt Pretensioner ...... 74 Pets ...... 103 Recreational Towing ...... 115 Seat Belt Reminder ...... 70 Phone (Uconnect) ...... 192 Release, Hood ...... 43 Seat Belt Reminder ...... 70 Placard, Tire And Loading Information . . .149 Reminder, Seat Belt ...... 70 Seat Belts ...... 69, 104 Power Remote Keyless Entry Adjustable Shoulder Belt ...... 73 Distribution Center (Fuses) ...... 128 Panic Alarm ...... 12 Adjustable Upper Shoulder Anchorage .73 Inverter ...... 50 Replacement Bulbs ...... 124 Child Restraint ...... 87 Outlet (Auxiliary Electrical Outlet) ....47 Replacement Tires ...... 155 Extender ...... 74 Sunroof ...... 42 Reporting Safety Defects ...... 204 Front Seat ...... 69, 70, 72 Power Steering Fluid ...... 167 Restraint, Head...... 22 Inspection ...... 104 Power Transfer Unit ...... 167 Restraints, Child ...... 87 Operating Instructions ...... 72 Pregnant Women And Seat Belts...... 74 Rocking Vehicle When Stuck ...... 133 Pregnant Women ...... 74 Preparation For Jacking ...... 119 Pretensioners ...... 74 208 Rear Seat ...... 70 Specifications Changing ...... 118, 145 Reminder ...... 55 Fuel (Gasoline) ...... 166 Compact Spare ...... 157 Untwisting Procedure ...... 73 Oil...... 166 General Information ...... 152, 157 Seats ...... 18, 19 Speed Control High Speed ...... 153 Adjustment ...... 18 Accel/Decel ...... 110 Inflation Pressures ...... 152 Easy Entry ...... 18, 20 Cancel ...... 110 Jacking ...... 118, 145 Heated ...... 18, 19 Resume ...... 110 Life Of Tires ...... 155 Memory ...... 18 Speed Control (Cruise Control) ...... 108 Load Capacity ...... 149 Rear Folding ...... 18, 21 Steering ...... 25 Pressure Monitor System (TPMS) ....64 Reclining Rear ...... 21 Column Controls ...... 26 Pressure Warning Light ...... 59 Seatback Release ...... 18, 21 Column Lock ...... 25 Quality Grading ...... 160 Tilting ...... 18 Tilt Column ...... 25 Radial ...... 153 Vented ...... 18 Wheel, Heated ...... 25 Replacement ...... 155 Ventilated ...... 18 Wheel, Tilt ...... 25 Safety ...... 145, 152 Security Alarm ...... 15, 56 Steering Wheel Audio Controls ...... 183 Sizes ...... 146 Selection Of Coolant (Antifreeze) ...... 166 Storage, Vehicle ...... 41 Snow Tires ...... 157 Service Assistance ...... 202 Stuck, Freeing ...... 133 Spare Tire ...... 118, 157, 158, 159 Service Contract ...... 203 Sun Roof ...... 42 Spinning ...... 154 Service Manuals ...... 204 Supplemental Restraint System - Air Bag . .79 Tread Wear Indicators ...... 155 Shift Lever Override ...... 133 Wheel Nut Torque ...... 164 Shoulder Belts ...... 70 Telescoping Steering Column ...... 25 Tire Safety Information...... 145 Signals, Turn ...... 27, 61, 106 Tilt Steering Column ...... 25 To Open Hood...... 43 Sirius Travel Link ...... 191 Tire And Loading Information Placard . . .149 Towing ...... 114 Snow Tires ...... 157 Tire Markings ...... 145 Disabled Vehicle ...... 135 Sound Systems (Radio) ...... 185 Tires ...... 106, 152, 157, 160 Guide ...... 114 Spare Tire ...... 118, 157, 158, 159 Aging (Life Of Tires) ...... 155 Recreational ...... 115 Spark Plugs ...... 166 Air Pressure ...... 152 Weight ...... 114 209 Towing Vehicle Behind A Motorhome. . . .115 USB Port ...... 183 Wheel And Wheel Trim...... 159 Trailer Towing ...... 114 Wheel And Wheel Trim Care...... 159 Trailer Towing Guide ...... 114 Vehicle Loading ...... 149 Wind Buffeting ...... 43 INDEX Trailer Weight ...... 114 Vehicle Security Alarm (Security Alarm) . . .15 Window Fogging ...... 41 Transporting Pets ...... 103 Vehicle Storage ...... 41 Windshield Defroster ...... 104 Tread Wear Indicators ...... 155 Video Entertainment System (Rear Seat Video Windshield Washers...... 28, 29 Turn Signals ...... 27, 61 System)...... 184 Windshield Wipers ...... 28 Voice Command ...... 198 Wiper, Delay ...... 28 Uconnect Voice Command ...... 198 Wiper, Rear ...... 29 Underhood Fuses ...... 128 Warning Lights (Instrument Cluster Wipers, Intermittent ...... 28 Uniform Tire Quality Grades ...... 160 Description) ...... 59 Wrecker Towing ...... 135 Untwisting Procedure, Seat Belt ...... 73 Washers, Windshield ...... 28, 29

210 INDEX 211 212 213 214 215 216 DODGE.COM (U.S.) IMPORTANT DODGE.CA (CANADA)

3069421_18b_Journey_UG_080417.indd 2 8/4/17 9:48 AM Whether it’s providing information about specific product features, taking a tour through your vehicle’s heritage, knowing what steps to take following an accident or scheduling your next appointment, we know you’ll find the app an important extension of your Dodge brand vehicle. Simply download the app, select your make and model and enjoy the ride. To get this app, go directly to the App Store or Google Play and enter the search DOWNLOAD A FREE ELECTRONIC keyword “Dodge” (U.S. residents only). COPY OF THE MOST UP-TO-DATE www.dodge.com/en/owners (U.S.) or www.owners.mopar.ca OWNER’S MANUAL, MEDIA AND (Canada) provides special offers tailored to your needs, WARRANTY BOOKLET BY VISITING: 2018 customized vehicle galleries, personalized service records and more. To get this information, just create an account JOURNEY and check back often. WWW.MOPAR.COM/EN-US/CARE/OWNERS-MANUAL.HTML Get warranty and other information online – you can review (U.S. RESIDENTS); and print or download a copy of the Owner’s Manual, WWW.OWNERS.MOPAR.CA USER GUIDE SECOND EDITION JOURNEY 18JC-926-AA USER Navigation/Uconnect manuals and the limited warranties provided by FCA US LLC for your vehicle by visiting (CANADIAN RESIDENTS). www.dodge.com/en/owners (U.S.) or www.owners.mopar.ca (Canada). Click on the applicable link in the “Popular Topics” DODGE.COM (U.S.)

GUIDE area of the www.dodge.com/en/owners (U.S.) or www.owners.mopar.ca (Canada) homepage and follow the DODGE.CA (CANADA) instructions to select the applicable year, make and model of your vehicle.

3069421_18b_Journey_UG_080417.indd 1 8/4/17 9:48 AM