DOCSLIB.ORG

Rejected Landing)

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Rejected Landing) Transportation Safety Board Bureau de la sécurité des transports of Canada du Canada AVIATION OCCURRENCE REPORT A97H0011 LOSS OF CONTROL ON GO-AROUND (REJECTED LANDING) AIR CANADA CANADAIR CL-600-2B19 C-FSKI FREDERICTON AIRPORT, NEW BRUNSWICK 16 DECEMBER 1997 The Transportation Safety Board of Canada (TSB) investigated this occurrence for the purpose of advancing transportation safety. It is not the function of the Board to assign fault or determine civil or criminal liability. Aviation Occurrence Report Loss of Control on Go-around (Rejected Landing) Air Canada Canadair CL-600-2B19 C-FSKI Fredericton Airport, New Brunswick 16 December 1997 Report Number A97H0011 Synopsis Air Canada Flight 646, C-FSKI, departed Toronto-Lester B. Pearson International Airport, Ontario, at 2124 eastern standard time on a scheduled flight to Fredericton, New Brunswick. On arrival, the reported ceiling was 100 feet obscured, the visibility one-eighth of a mile in fog, and the runway visual range 1200 feet. The crew conducted a Category I instrument landing system approach to runway 15 and elected to land. On reaching about 35 feet, the captain assessed that the aircraft was not in a position to land safely and ordered the first officer, who was flying the aircraft, to go around. As the aircraft reached its go-around pitch attitude of about 10 degrees, the aircraft stalled aerodynamically, struck the runway, veered to the right and then travelled—at full power and uncontrolled—about 2100 feet from the first impact point, struck a large tree and came to rest. An evacuation was conducted; however, seven passengers were trapped in the aircraft until rescued. Of the 39 passengers and 3 crew members, 9 were seriously injured and the rest received minor or no injuries. The accident occurred at 2348 Atlantic standard time. Ce rapport est également disponible en français. TABLE OF CONTENTS 1.0 Factual Information.................................... 1 1.1 History of the Flight................................................... 1 1.2 Injuries to Persons .................................................... 3 1.3 Damage to Aircraft.................................................... 3 1.4 Other Damage........................................................ 4 1.5 Personnel Information................................................. 4 1.5.1 General.............................................................. 4 1.5.2 Captain.............................................................. 4 1.5.3 First Officer .......................................................... 5 1.5.4 Cabin Crew .......................................................... 5 1.6 Aircraft Information................................................... 6 1.6.1 General.............................................................. 6 1.6.2 Aircraft Systems ...................................................... 6 1.6.2.1Flight Director........................................................ 6 1.6.2.2 Stall Protection System ................................................ 7 1.6.2.3Airspeed Indications .................................................. 8 1.6.2.4Flaps ................................................................ 9 1.7 Meteorological Information ........................................... 10 1.7.1 General............................................................. 10 1.7.2 Forecast Weather .................................................... 10 1.7.3 Actual Weather...................................................... 11 1.7.4 Icing Conditions..................................................... 11 1.8 Aids to Navigation................................................... 12 1.9 Communications..................................................... 12 1.10 Aerodrome Information .............................................. 13 1.10.1General............................................................. 13 1.10.2Runway Lighting and Runway Visual Range............................ 13 1.10.3Runway Condition................................................... 13 1.10.4Air Traffic Services ................................................... 14 1.11 Flight Recorders ..................................................... 15 1.11.1General............................................................. 15 1.11.2Flight Data Recorder ................................................. 15 TRANSPORTATION SAFETY BOARD iii TABLE OF CONTENTS 1.11.3Cockpit Voice Recorder............................................... 15 1.11.4Flight Reconstruction................................................. 16 1.12 Wreckage and Impact Information .................................... 16 1.13 Medical Information ................................................. 18 1.14 Fire ................................................................ 18 1.15 Survival Aspects..................................................... 18 1.15.1General............................................................. 18 1.15.2The Aircraft ......................................................... 18 1.15.3Air Canada Emergency Procedures..................................... 19 1.15.4Training—Emergency Equipment and Procedures....................... 20 1.15.5Occurrence Flight.................................................... 21 1.15.6Emergency Response................................................. 23 1.15.7Emergency Locator Transmitter........................................ 24 1.16 Tests and Research................................................... 25 1.17 Organizational and Management Information........................... 26 1.17.1Air Canada Regional Jet Training Program.............................. 26 1.17.1.1Introduction........................................................ 26 1.17.1.2Pilot Training....................................................... 26 1.17.1.3Line Indoctrination and Command Training............................ 26 1.17.2Crew Pairing........................................................ 27 1.18 Other Information ................................................... 27 1.18.1Conduct of the Flight................................................. 27 1.18.1.1General ............................................................ 27 1.18.1.2Assignment of Flying Duties.......................................... 27 1.18.1.3Final Approach to Go-around Command............................... 28 1.18.1.4The Go-around ..................................................... 31 1.18.1.5Stall Prevention..................................................... 39 1.18.1.6Runway Length..................................................... 41 1.18.2 Approach and Landing Issues ......................................... 42 1.18.2.1Category I and Category II Approaches ................................ 42 1.18.2.2Approach Bans...................................................... 43 1.18.2.3Approach Criteria ................................................... 44 1.18.2.4Loss of Visual References after Deciding to Land........................ 46 iv TRANSPORTATION SAFETY BOARD TABLE OF CONTENTS 1.18.2.5Approach Procedures................................................ 46 1.18.2.6Weather-related Occurrences......................................... 48 1.18.3Aircraft Performance ................................................. 49 1.18.3.1General ............................................................ 49 1.18.3.2Stall Protection System Activation..................................... 49 1.18.3.3Coefficient of Lift Curve.............................................. 50 1.18.3.4Flight Data Recorder Data from Previous Flight......................... 50 1.18.3.5Flight Data Recorder Data from Aircraft 104 ............................ 51 1.18.3.6Simulator Comparison............................................... 51 1.18.3.7Wing Condition..................................................... 52 1.18.3.8Ground Effect....................................................... 53 1.18.3.9 Ice Accretion ....................................................... 53 1.18.3.10Ice Detection and Protection......................................... 55 2.0 Analysis............................................. 57 2.1 Introduction......................................................... 57 2.2 Survival Aspects..................................................... 57 2.2.1 Training on Evacuation and Emergency Equipment...................... 57 2.2.2 Survival Equipment—Signalling Tools .................................. 58 2.2.3 Emergency Equipment—Location of Flashlights......................... 58 2.2.4 Passenger Preparedness for Post-Evacuation Survival .................... 59 2.2.5 Emergency Response................................................. 59 2.3 Operational Issues ................................................... 59 2.3.1 Approach and Transition to Land...................................... 59 2.3.1.1Approach Ban Weather Limits......................................... 59 2.3.1.2Weather Conditions and Effects on this Flight........................... 60 2.3.1.3Low-Weather Procedures............................................. 61 2.3.2 Assigning First Officer Pilot-Flying Duties............................... 61 2.3.3 Captain Duties on Approach .......................................... 62 2.3.4 Go-around Issues .................................................... 63 2.3.4.1Low-Energy Rejected Landing Considerations .......................... 63 2.3.4.2Flight Director Guidance.............................................. 64 2.3.4.3Go-around Procedure and Training...................................
Load more

Recommended publications
  • Initial Piloted Simulation Study of Geared Flap R Tilt-Wing V/STOL
    R NASA Technical Memorandum 103872 Initial Piloted Simulation Study of Geared Flap Control r Tilt-Wing V/STOL Aircraft Lourdes M. Guerrero and Lloyd Da Corliss [NASA-TM-103872) INITIAL PILOTED N93-10741 ~~~U~A~~~NSTUDY QF GEARft) FLAP ~Q~~~~~ fOR TILT-WING V/STOL AIRCRAFT (NASA) 39 p Wncfas 63/08 01180?6 October 1991 National Aeronautics and Space Administration NASA Technical Memorandum 103872 Initial Piloted Simulation Study of Geared Flap Control For Tilt-Wing V/STOL Aircraft Lourdes M. Guerrero and Lloyd D Corliss, Ames Research Center, Moffett Field, California October 1991 National Aeronautics and Space Administration Ames Research Center Moffett Field, Califorrlia94035 -1000 SUMMARY A simulation model was developed for piloted evaluations of a representative tilt-wing V/STOL (Vertical/Short Takeoff and Landing) aircraft. Using this model an initial tilt-wing simulation study was conducted in 1990 on the Ames Vertical Motion Simulator In the past, all tilt-wing aircraft have required a horizontal tail rotor or reaction jets to provide pitch control in hover and low speeds. To alleviate this need, devices such as monocyclic propellers and a geared flap have been proposed for providing control at low speed. The geared flap is the sub- ject of this study and it is compared to the conventional flap used in previous tilt-wing aircraft. Objectives of the study were to simulate a tilt-wing V/STOL aircraft, to evaluate and compare the control effectiveness and handling qualities of both a conventional (programmed flap) and the geared flap control configurations, and to determine the feasibility of eliminating the horizontal tail rotor or reaction jets of prior designs through the use of the geared flap control configuration.
    [Show full text]
  • American Eagle Flight 3008 ALPA Submission
    SUBMISSION OF THE AIR LINE PILOTS ASSOCIATION TO THE NATIONAL TRANSPORTATION SAFETY BOARD REGARDING AN INCIDENT INVOLVING AMERICAN EAGLE AIRLINES FLIGHT 3008 Santa Maria, CA January 2, 2006 1 SUMMARY..........................................................................................................................................3 2 HISTORY OF FLIGHT......................................................................................................................3 3 WEATHER ..........................................................................................................................................5 3.1 WEATHER RADAR ........................................................................................................................ 5 3.2 AIRMETS ................................................................................................................................... 5 3.3 CONCLUSION................................................................................................................................5 4 OPERATIONS.....................................................................................................................................5 4.1 DEFERRED DE-ICE TIMER CONTROL SYSTEM .............................................................................. 5 4.2 STALL WARNING SYSTEM............................................................................................................ 6 4.3 STALL RECOVERY TRAINING ......................................................................................................
    [Show full text]
  • Vertical Motion Simulator Experiment on Stall Recovery Guidance
    NASA/TP{2017{219733 Vertical Motion Simulator Experiment on Stall Recovery Guidance Stefan Schuet National Aeronautics and Space Administration Thomas Lombaerts Stinger Ghaffarian Technologies, Inc. Vahram Stepanyan Universities Space Research Association John Kaneshige, Kimberlee Shish, Peter Robinson National Aeronautics and Space Administration Gordon Hardy Retired Research Test Pilot Science Applications International Corporation October 2017 NASA STI Program. in Profile Since its founding, NASA has been dedicated • CONFERENCE PUBLICATION. to the advancement of aeronautics and space Collected papers from scientific and science. The NASA scientific and technical technical conferences, symposia, seminars, information (STI) program plays a key part or other meetings sponsored or in helping NASA maintain this important co-sponsored by NASA. role. • SPECIAL PUBLICATION. Scientific, The NASA STI Program operates under the technical, or historical information from auspices of the Agency Chief Information NASA programs, projects, and missions, Officer. It collects, organizes, provides for often concerned with subjects having archiving, and disseminates NASA's STI. substantial public interest. The NASA STI Program provides access to the NASA Aeronautics and Space Database • TECHNICAL TRANSLATION. English- and its public interface, the NASA Technical language translations of foreign scientific Report Server, thus providing one of the and technical material pertinent to largest collection of aeronautical and space NASA's mission. science STI in the world. Results are Specialized services also include organizing published in both non-NASA channels and and publishing research results, distributing by NASA in the NASA STI Report Series, specialized research announcements and which includes the following report types: feeds, providing information desk and • TECHNICAL PUBLICATION. Reports of personal search support, and enabling data completed research or a major significant exchange services.
    [Show full text]
  • For Improved Airplane Performance
    BLENDED WINGLETS FORFOR IMPROVEDIMPROVED AIRPLANEAIRPLANE PERFORMANCEPERFORMANCE New blended winglets on the Boeing Business Jet and the 737-800 commercial airplane offer operational benefits to customers. Besides giving the airplanes a distinctive appear- ance, the winglets create more efficient flight characteristics in cruise and during takeoff and climbout, which translate into additional range with the same fuel and payload. ROBERT FAYE ROBERT LAPRETE MICHAEL WINTER TECHNICAL DIRECTOR ASSOCIATE TECHNICAL FELLOW PRINCIPAL ENGINEER BOEING BUSINESS JETS AERODYNAMICS TECHNOLOGY STATIC AEROELASTIC LOADS BOEING COMMERCIAL AIRPLANES BOEING COMMERCIAL AIRPLANES BOEING COMMERCIAL AIRPLANES TECHNOLOGY/PRODUCT DEVELOPMENT AERO 16 vertical height of the lifting system (i.e., increasing the length of the TE that sheds the vortices). The winglets increase the spread of the vortices along the TE, creating more lift at the wingtips (figs. 2 and 3). The result is a reduction in induced drag (fig. 4). The maximum benefit of the induced drag reduction depends on the spanwise lift distribution on the wing. Theoretically, for a planar wing, induced drag is opti- mized with an elliptical lift distribution that minimizes the change in vorticity along the span. For the same amount of structural material, nonplanar wingtip 737-800 TECHNICAL CHARACTERISTICS devices can achieve a similar induced drag benefit as a planar span increase; however, new Boeing airplane designs Passengers focus on minimizing induced drag with 3-class configuration Not applicable The 737-800 commercial airplane wingspan influenced by additional 2-class configuration 162 is one of four 737s introduced BBJ TECHNICAL CHARACTERISTICS The Boeing Business Jet design benefits. 1-class configuration 189 in the late 1990s for short- to (BBJ) was launched in 1996 On derivative airplanes, performance Cargo 1,555 ft3 (44 m3) medium-range commercial air- Passengers Not applicable as a joint venture between can be improved by using wingtip Boeing and General Electric.
    [Show full text]
  • [4910-13-P] DEPARTMENT of TRANSPORTATION Federal
    This document is scheduled to be published in the Federal Register on 05/13/2021 and available online at federalregister.gov/d/2021-10015, and on govinfo.gov [4910-13-P] DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2021-0366; Project Identifier MCAI-2021-00080-T] RIN 2120-AA64 Airworthiness Directives; ATR – GIE Avions de Transport Régional Airplanes AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). SUMMARY: The FAA proposes to supersede Airworthiness Directive (AD) 2020-23-13, which applies to all ATR – GIE Avions de Transport Régional Model ATR42-200, -300, and -320 airplanes. AD 2020-23-13 requires a one-time inspection for discrepancies of the wire bundles between the left- and right-hand angle of attack (AOA) probes and the crew alerting computer, and, depending on findings, applicable corrective actions. Since the FAA issued AD 2020-23-13, a wiring modification for the captain stick shaker has been developed, along with an update to the aircraft flight manual (AFM). This proposed AD would continue to require the actions in AD 2020-23-13. This proposed AD would also require, for certain airplanes, modifying the captain stick shaker wiring, and for all airplanes, revising the existing AFM and applicable corresponding operational procedures to incorporate procedures for the stick pusher/shaker, as specified in a European Union Aviation Safety Agency (EASA), which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products. DATES: The FAA must receive comments on this proposed AD by [INSERT DATE 45 DAYS AFTER DATE OF PUBLICATION IN THE FEDERAL REGISTER].
    [Show full text]
  • Airplane Icing
    Federal Aviation Administration Airplane Icing Accidents That Shaped Our Safety Regulations Presented to: AE598 UW Aerospace Engineering Colloquium By: Don Stimson, Federal Aviation Administration Topics Icing Basics Certification Requirements Ice Protection Systems Some Icing Generalizations Notable Accidents/Resulting Safety Actions Readings – For More Information AE598 UW Aerospace Engineering Colloquium Federal Aviation 2 March 10, 2014 Administration Icing Basics How does icing occur? Cold object (airplane surface) Supercooled water drops Water drops in a liquid state below the freezing point Most often in stratiform and cumuliform clouds The airplane surface provides a place for the supercooled water drops to crystalize and form ice AE598 UW Aerospace Engineering Colloquium Federal Aviation 3 March 10, 2014 Administration Icing Basics Important Parameters Atmosphere Liquid Water Content and Size of Cloud Drop Size and Distribution Temperature Airplane Collection Efficiency Speed/Configuration/Temperature AE598 UW Aerospace Engineering Colloquium Federal Aviation 4 March 10, 2014 Administration Icing Basics Cloud Characteristics Liquid water content is generally a function of temperature and drop size The colder the cloud, the more ice crystals predominate rather than supercooled water Highest water content near 0º C; below -40º C there is negligible water content Larger drops tend to precipitate out, so liquid water content tends to be greater at smaller drop sizes The average liquid water content decreases with horizontal
    [Show full text]
  • 1 Einleitung
    User Manual ATOS C Version: 29.01.2002 English translation: 9 August 2002 by Heiner Biesel Please read before flying! Congratulations on your purchase, and welcome to the ATOS world! Your ATOS C is a high performance glider. To fully exploit its capabilities while remaining well within safe limits, you should become thoroughly familiar with the contents of this manual. If you have any questions or need support, do not hesitate to contact the A.I.R. Team. Your A.I.R. Team Version: 01/02 1 1. Transport • By car The carbon fiber D-tube can be damaged by point loading. For safe transport the glider should always be supported by a large padded area. A ladder with several padded steps is one possibility. If the D- tube is supported at only two places, these supports need to be padded at least 4 inches in length, and wide enough to support the full width of the glider. Anything less is likely to result in transport damage, which can seriously reduce the strength of the main spar and the entire D-tube. Do not tie down the glider too tightly, and use wide tubular of flat webbing to minimize point loading. If the glider is likely to get exposed to rain, and especially to salt water, a watertight cover bag is strongly recommended. If the ATOS C gets wet, dry it as quickly as possible to avoid staining the sail, or causing corrosion of the metal parts. Exposure to salt water should always be followed by a thorough rinse in sweet water.
    [Show full text]
  • 1/3-Scale Unlimited Aerobatic ARF
    TM® WE GET PEOPLE FLYING 1/3-Scale Unlimited Aerobatic ARF INSTRUCTION MANUAL • Superior controllability and aerobatic flight characteristics • Lightweight construction • Designed by veteran TOC competitor Mike McConville • 90% built 1/3-scale ARF • Plug-in wings for easy transport and field assembly Specifications Wingspan: . 97 in (2463.8 mm) Length: . 88.7 in (2253 mm) Wing Area: . 1810 sq in (116.7 sq dm) Weight: . 22.5–25.5 lb (10.2–11.6 kg) Recommended Engines: . 60–80cc Table of Contents Introduction . 4 Warning . 4 Additional Required Equipment . 5 Other Items Needed (not included in the kit) . 6 Tools and Adhesives Needed (not included in the kit) . 6 Additional Items Needed . 6 Contents of Kit . 7 Section 1. Installing the Wing to the Fuselage . 8 Section 2. Installing the Aileron Servos . 9 Section 3. Installing the Aileron Control Horns . 11 Section 4. Hinging and Sealing the Aileron Control Surfaces . 13 Section 5. Installing the Aileron Linkages . 16 Section 6. Installing the Rudder and Elevator Servos . 18 Section 7. Installing the Elevator, Control Horns, and Linkages . 19 Section 8. Installing the Rudder, Control Horns, and Linkages . 22 Section 9. Attaching the Tail Wheel . 24 Section 10. Installing the Landing Gear and Wheelpants . 25 Section 11. Installing the Receiver, Battery, and Fuel Tank . 28 Section 12. Mounting the Engine and Cowl . 30 Section 13. Hatch Assembly . 33 Section 14. Balancing the Model . 34 Section 15. Radio Setup . 34 Section 16. Control Throws . 35 Section 17. Preflight at the Field . 35 Section 18. Setup and Flight Information by Mike McConville . 36 AMA Safety Code .
    [Show full text]
  • Nflight Report: Canadair's Corporate RJ
    PILOT REPORT nflight Report: Canadair’s Corporate RJ I A business aircraft designed to make the “corporate commuter” a practical reality. By FRED GEORGE December 1992, Document No. 2404 (9 pages) Stand by for a startling change in the way a business trips are representative of the air travel patterns of large aircraft is justified. Canadair claims its new Corporate U.S. companies that could take advantage of a 24- to- Regional Jet (RJ for short) can challenge the airlines 30-seat corporate shuttle aircraft. head-to-head in a seat-mile cost showdown and win. The seat-mile costs of a 30-seat RJ assume a utiliza- Whatever happened to all those subjective intangi- tion of 1,000 hours per year. While such annual bles we’ve heard for decades? Time-honored terms usage may be modest by airline standards, it repre- such as “value of executive time” “lost opportunity sents a lot of flight hours to a company accustomed to cost,” and “productivity index” are missing from on-demand business aircraft operations. A shuttle Canadair’s RJ marketing materials. That’s because the operation, though, typically might fly two, two-hour company cuts straight to bottom line operating eco- legs per weekday that would add up to 1,000 hours nomics. Canadair salespeople claim a company oper- in a 50 week period. ating a 24- to 30-seat, business-class configured Canadair didn’t cut corners on estimating the costs Corporate RJ will spend less for air transportation on involved with operating the Corporate RJ. The projec- most trips than if it bought coach fare seats on sched- tions cover capital costs in the form of lease payments; uled airlines.
    [Show full text]
  • The «Active Aeroelasticity» Concept – the Main Stages and Prospects of Development
    THE «ACTIVE AEROELASTICITY» CONCEPT – THE MAIN STAGES AND PROSPECTS OF DEVELOPMENT 1 G.A. Amiryants, 2 A.V. Grigorev, 3 Y.A. Nayko, 4 S.E. Paryshev, 1 Main scientific researcher, 2 Junior Scientific researcher, 3 Scientific researcher, 4 Head of department Central Aero-hydrodynamic Institute – TsAGI, Russia Keywords: active aeroelasticity, multidisciplinary investigations, elastically scaled model From the very beginning of static aeroelasticity supervision by A.Z. Rekstin and research it’s important part was searching for V.G. Mikeladze. However, the common rational ways of providing airplanes’ safety drawback of these control surfaces too was from aileron reversal and divergence as well as negative influence of structural elasticity on providing weight efficiency and high these surfaces’ effectiveness. aerodynamic performance of airplanes. The studies by Ja.M.. Parchomovsky, G.A. Amiryants, D.D. Evseev, S.Ja. Sirota, One of the most promising directions of aircraft V.A. Tranovich, L.A. Tshai, Ju.F. Jaremchuk design worldwide today is related to the term of performed in 1950-1960 in TsAGI “exploitation of structural elasticity” or the systematically demonstrated the possibilities to “active aerolasticity” concept. The early 1960s increase control surfaces effectiveness (and faced the urgent need to increase stiffness of solving other static aeroelasticity problems) thin low-aspect-ratio wings of supersonic M-50 using “traditional” approaches: rational increase and R-020 airplanes to diminish negative of wing stiffness (by changing wing skin influence of structural elastic deformations on thickness distribution, airfoil thickness, roll control. As it turned out, even with the choosing the position of stiffness axis, wing optimal increase of structural stiffness to solve spar stiffness), variation of position and shape severe aileron reversal problem the increase of of conventional ailerons and rudders, the airframe weight was unacceptable.
    [Show full text]
  • Stall Warnings in High Capacity Aircraft: the Australian Context 2008 to 2012
    Stall warnings in high capacityInsert document aircraft: title The Australian context Location2008 to 2012 | Date ATSB Transport Safety Report InvestigationResearch [InsertAviation Mode] Research Occurrence Report Investigation XX-YYYY-####AR-2012-172 Final – 1 November 2013 Publishing information Published by: Australian Transport Safety Bureau Postal address: PO Box 967, Civic Square ACT 2608 Office: 62 Northbourne Avenue Canberra, Australian Capital Territory 2601 Telephone: 1800 020 616, from overseas +61 2 6257 4150 (24 hours) Accident and incident notification: 1800 011 034 (24 hours) Facsimile: 02 6247 3117, from overseas +61 2 6247 3117 Email: [email protected] Internet: www.atsb.gov.au © Commonwealth of Australia 2013 Ownership of intellectual property rights in this publication Unless otherwise noted, copyright (and any other intellectual property rights, if any) in this publication is owned by the Commonwealth of Australia. Creative Commons licence With the exception of the Coat of Arms, ATSB logo, and photos and graphics in which a third party holds copyright, this publication is licensed under a Creative Commons Attribution 3.0 Australia licence. Creative Commons Attribution 3.0 Australia Licence is a standard form license agreement that allows you to copy, distribute, transmit and adapt this publication provided that you attribute the work. The ATSB’s preference is that you attribute this publication (and any material sourced from it) using the following wording: Source: Australian Transport Safety Bureau Copyright in material obtained from other agencies, private individuals or organisations, belongs to those agencies, individuals or organisations. Where you want to use their material you will need to contact them directly.
    [Show full text]
  • 10CAG/10CHG/10CG-2.4Ghz 10-CHANNEL RADIO CONTROL SYSTEM
    10CAG/10CHG/10CG-2.4GHz 10-CHANNEL RADIO CONTROL SYSTEM INSTRUCTION MANUAL Technical updates and additional programming examples available at: http://www.futaba-rc.com/faq Entire Contents ©Copyright 2009 1M23N21007 TABLE OF CONTENTS INTRODUCTION ........................................................... 3 Curve, Prog. mixes 5-8 ............................................. 71 Additional Technical Help, Support and Service ........ 3 GYA gyro mixing (GYRO SENSE) ............................... 73 $SSOLFDWLRQ([SRUWDQG0RGL¿FDWLRQ ........................ 4 Other Equipment ....................................................... 74 Meaning of Special Markings ..................................... 5 Safety Precautions (do not operate without reading) .. 5 Introduction to the 10CG ............................................ 7 GLIDER (GLID(1A+1F)(2A+1F)(2A+2F)) FUNCTIONS . 75 &RQWHQWVDQG7HFKQLFDO6SHFL¿FDWLRQV........................ 9 Table of contents........................................................ 75 Accessories ............................................................... 10 Getting Started with a Basic 4-CH Glider ................ 76 Transmitter Controls & GLIDER-SPECIFIC BASIC MENU FUNCTIONS ........ 78 6ZLWFK,GHQWL¿FDWLRQ$VVLJQPHQWV ............................. 11 Model type (PARAMETER submenu) ........................... 78 Charging the Ni-Cd Batteries ................................... 15 MOTOR CUT ................................................................ 79 Stick Adjustments ....................................................
    [Show full text]