Backflow Prevention Products Condensed Catalog

Water Safety Water Safety, Flow Control and Backflow Prevention Products Condensed Catalog

watts.com Index

Model/Series ------Page Model/Series ------Page Model/Series ------Page Model/Series ------Page Numerical 1L/1XL ------25 800MQT ------61 Elbows ------59 PVS-1000 ------39 2-M2 ------115 909 ------52-53 EMVII-6400SS------70 PX, P1-P16 ------120 3L------28 909RPDA------58 ENS-20 ------30 QF ------103 05------113 911------95 ETA------96 R-24, R-26, R-30 ------30 6 ------79 912HP------60 ET-RA ------96 RA ------105 007------43 919------55 ETX, ETSX ------97 * RBFF------99 007DCDA ------48 957/957N/957Z ------49 F127W ------15 RK-SAE-TC/RK-TC 1⁄8 ------59 7 ------62 957RPDA/957NRPDA/957ZRPDA - - 56 FBV------75 RK-W STD ------66 008PCQT------61 994------50 FBV-PEX ------76 RL600 ------121 8 ------63 994BLT/994HMB------51 FBV-PEX-DE ------77 RPV ------99 009------54 994RPDA------57 FBV-3C/FBVS-3C ------75 S8/S8C ------63 9BD/9D/9DS ------60 1000 ------120 FBV-3C-QC ------75 SAE-TC/SAE-TC Adapter ------59 10L------25 1156F ------95 FBV-3-Press ------76 SAE-TC Brass Cap ------59 15------113 1170-M2/L1170-M2 ------111 FBV-4/FBVS-4 ------76 SAN50------107 17 ------86 1250 ------120 FH/FHB ------117 SAN89------107 25AUB-Z3 ------5 1450F ------95 Fig. 31/41/41A ------23, 24 SC, SC8 ------118 26A------18 1500 ------120 FR 500 ------66 SD-2 ------64 27 ------86 2000 ------120 FS10-C ------106 SD-3 ------64 30/30L ------28 2000-M5 ------103 FS10-F ------106 S-FBV-1------77 40L/40XL ------26, 27 2300------16 FS-20 ------106 SilverEagle TC------59 53L------28 3000 - 3200 ------122, 123 FS-26, FS-36 ------31 SS ------119 70A------112 5300A ------29 FS-CDC-S ------124 SS07F------66 77F-BI ------86 Alphabetical FS-CFC-S ------124 ST375 - ST2000 ------120 77F-CSI------87 A2C-M1------114 FS-CIC-S ------124 STD-CA ------121 77F-CSSI------88 A200 ------116 FS-CTC-S ------125 SV/SVA/SVS ------105 77F-DI-125/77F-DI-250 ------85 ACV ------17 FS-CWM-S------125 SW/SWS/SWT/SWC ------119 77F-DI-FDA-125 ------85 Air Gaps ------59 FV-4M1 ------101 T145B ------95 77F-SS/77G-SS ------88 Anti-Scale Systems ------135 G/GH ------103 T156B ------95 77S ------85 APU ------115 G-4000M/G-4000-M1 ------78 TA------133 87SI ------87 AS/AS-T------100 GBF-H, GBF-G ------92 TB------132 88CSI ------87 AS-B ------100 GBV ------78 TBC ------133 88S ------88 B-24, B-26, B-30, B-36 ------30 GBV-1 ------78 TBP------133 97FB-CI------89 B6000/B6001------68 Gov. 80-M1 ------63 TBR------132 97FB-CSSI------89 B6000-CC/B6001-CC ------73 G-TB, G-TBR ------134 Test Cocks ------59 97FB-FSFE------89 B6002------71 GV/GVS/GLV ------82 TDV ------91 97FD-CIB------89 B6010/B6011------72 H32 ------28 TK-7 ------65 100DT/100DT-A ------36 B6013------72 H560------18 TK-9A ------65 100XL ------25 B6080/B6081------69 HAV ------101 TK-99D ------65 110/113/114/115/116/118/127(ACV) 17 B6300/B6301------71 HBV ------108 TK-99E ------65 123LP ------16 B6400------72 HP ------98 TK-DL ------65 127------20 B6400SE ------72 HPX ------98 TL ------134 127W ------15 B6780/B6781------71 HWA ------108 TP------134 140 ------26, 27 B6800/B6801------73 HY-42 ------117 TR ------66 142/144------107 Ball Valve Options ------74 ICV-125-2-2-T------79 TSE-75 ------31 150A ------113 BD ------116 ICVF-125 ------80 TWH ------34 152A/152SS ------19 BD-QT ------117 ICVW-125 ------80 TWS ------64 174A------21 BF------93, 94 IPF-T-M1/IPF-S-M1------102 U5B-Z3 ------4 188A------62 BIC-1000 ------39 IR-56------18 UL ------108 210-5 ------25 BP30------29 IT6300/IS6301 ------74 USG-B------109 215------19 BRV ------36 IWTG------19 USG-P------109 223/223S ------14 C1⁄4TF------121 IWTG-Gas ------131 WAMV ------119 252A------19 C-36-Com ------30 IWTG-HTX ------131 WAS ------119 263A------18 C-FBV-1 ------77 IWTG-NYC ------131 Watts Rock------67 276H300 ------19 CDC-S ------126 Jumper Kits ------13 WB-Watts Box ------67 288A------62 CFC-P ------126 KA2------114 WBV-3/WBVS-3 ------77 289------62 CFC-S ------126 L111 ------110 WBVC ------77 315------23 CIC-P ------127 M1⁄4TF ------121 WCV ------83 340/342------26, 27 CSM-61 ------90 MG/MGH ------103 * WDS ------33 374A------21 CSM-81 ------90 MMV-M1 ------110 W-FLG------67 375------120 CSM-91 ------90 N9/N9C/N9-CD/NLF9 ------60 WFT ------104 403RT-RW ------81 CTC-P ------127 N30/N30L ------28 WFTC/WFTK------105 405/406 ------81 CTC-S ------127 N36 ------35 WGV ------82 408-OSY-RW ------81 Cu7 ------62 N45B, N45B-M1 ------6 – 7 WGVS-1, WGVC ------83 411------82 CV/CVS/CVY/CVYS ------84 N45B-EZ-M1, N45BDU-EZ - - - - - 8 – 9 WIB------104 415------23 CWH-S ------38, 128 N50 ------106 WM-26/WM-30------31 500------120 CWM-S ------128 N55B, N55B-M1 ------11 – 12 W-SPL------67 530C ------28 CX, C4-C12 ------120 * N170------112 WTD-600 ------105 560------18 DBF------93, 94 N223B/N223BS ------15 WVS ------66 600/601S ------79 DETA------37 N223F/N223FS------15 X-65B ------10 709------42 DET-M1 ------37 N240X/N241X ------26, 27 709DCDA ------47 DPG1 ------129 N250 ------16 719------44 DPG3 ------129 N360, N3601 ------35 740------22 DPG5 ------130 N388 ------62 745------86 DPS-20 ------30 NF8 ------63 750------120 DPTG1/DPTG3 ------130 OTV ------108 757/757N ------40 DuoVent ------100 P3------101 757DCDA/757NDCDA ------45 DWB ------114 P60------19 774------41 E-50 ------31 P777-100 ------87 774DCDA ------46 E-75 ------32 PG ------91 777------85 E-100 ------31 PIPF ------102 800M4FR/800M4QT ------61 E-120 ------32 PLT ------38

* New items or sizes added. Watts Regulator Company

Since 1874 Watts Regulator Company has been a leader in valve technology, offering a wide variety of products for applications in the commercial, fire protection, heating & hydronics, irrigation, residential, steam and waterworks markets. As you will see by looking through our general catalog, Watts has truly become the single source for plumbing & heating and water quality products. Why not make Watts your single source for quality plumbing products?

Table of Contents

Section 1 Pressure Regulators & Automatic Control Valves...... 4 – 20

Section 2 Relief Valves ...... 21 – 29

Section 3 Water Heater Installation Products ...... 30 – 38 (Drain Lines, Expansion Tanks, Water Heater Stands, Straps, Enclosures, WDS and TWH )

Section 4 Backflow Preventers & Accessories ...... 39 – 67

Section 5 Ball Valves...... 68 – 78

Section 6 Gate / Globe / Check Valves...... 79 – 84

Section 7 Strainers ...... 85 – 89

Section 8 Balancing & Flow Measurement ...... 90 – 91

Section 9 Butterfly Valves ...... 92 – 94

Section 10 Hydronics / Steam Heating Products ...... 95 – 108

Section 11 Tempering Valves ...... 109 – 112

Section 12 Plumbing Specialties ...... 113 – 121 (Wall Hydrants, Water Hammer Arrestors, Float Valves, Evaporative Cooler Kits, Trap Primers)

Section 13 Dielectric Unions ...... 122 – 123

Section 14 Flexible Connectors...... 124 – 128

Section 15 Gauges ...... 129 – 135

Section 16 Anti-Scale Systems ...... 136 D WEIGHT U5B-Z3 C 41 483 1.8 23 10.4 4857 573 9 2.3 14 4.0 6.3 A 8 4 8 8 4 ⁄ ⁄ ⁄ ⁄ ⁄ 5 1 7 1 7 B sealed epoxy coated spring cage and corrosion resistant adjusting and cage screws for accessible outdoor or pit installations expansion (U5B)* pressure diaphragm for hot water Features • Standard construction includes Z3 • Integral stainless steel strainer • Replaceable seat module • Bronze body construction • Serviceable in line • Bypass feature controls thermal • High temperature resistant reinforced 108 1 137155165 2 2 2 50 6 2.7 8 8 2 4 ⁄ ⁄ ⁄ ⁄ 1 3 1 1 " (20mm) meter 4 ⁄ 3 149 4 311 9 229 3 175187213 5238 5 6 6 127 1 4 ⁄ 8 8 8 8 8 ⁄ ⁄ ⁄ ⁄ ⁄ 1 7 7 3 3 3 DIMENSIONS (APPROX.) " (16 x 20mm) or 4 ⁄ " (190mm) lay length for new or 3 2 ⁄ 1 276 12 143 5 191240 8 9 157168 6 7 " x 8 ⁄ 5 " - 2") ABCD 2 ⁄ 1 ( 8 ⁄ 16 8 8 16 16 ⁄ ⁄ ⁄ 7 ⁄ ⁄ 5 5 7 3 15 " (16mm), 8 ⁄ 5 (see page 12) 15 5 3240 7 9 20 6 ∆ 4 2 ⁄ ⁄ 4 2 SIZE (DN) ⁄ ⁄ 1 1 2 50 10 1 25 6 in. mm in. mm in. mm in. mm in. mm lbs. kgs. 1 3 1 1 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com Single Union - Quick-Connect inlet end Solder Union inlet x NPT female outlet w/built in thermal expansion bypass NPT threaded female union inlet x NPT female outlet w/built in thermal Water meter Water threaded connections and 7

industrial applications † Dimensions for all models are shown on literature ES-U5. U5B-Z3 U5B-Z3 U5B-Z3 U5B-Z3 U5B-Z3 U5B-Z3 MODEL † on the hot water supply system with pressure above 150psi (10.3 bar). on the hot water supply system with above pressure 150psi (10.3 bar). setters or resetters High Performance Reducing Pressure Water Valves For additional information, request literature ES-U5 *NOTE: The bypass feature will not prevent the relief pressure valve from opening Options add Suffix: G Gauge tapping GG Gauge tapping and 160psi (11.0 bar) gauge HP High range pressure 75 – 100psi (5.2 – 6.9 bar) LP Low range pressure 10 – 35psi (69 – 241 kPa) expansion bypass U5B-S-Z3 – U5B-QC-Z3 – 5M3-Z6 – Models U5B-Z3 – Meets requirements Meets of requirements ASSE Standard 1003, (ANSI A112.26.2), CSA Standard B356, Southern Standard Plumbing Code and listed by IAPMO. Standards • Range: 33°F – 160°F Temperature (0.5°C – 71°C) • Maximum Working 300psi Pressure: (20.7 bar) • Adjustable Reduced Range: Pressure 25 – 75psi (172 – 517kPa) • Standard Reduced Setting: Pressure 50psi (345kPa) Specifications • Basic design and construction is time tested and proven • Offers durability and years of continuous operation trouble-free • savings Water up to 30% • Provides water control pressure solutions for residential, commercial, and Series Series U5B-Z3 existing meter box installations. For 4 1 Pressure Regulators & Automatic Control Valves Series 25AUB-Z3 (1⁄2" – 2") 1 Standard Capacity Water Pressure Reducing Valves • Accurate water pressure control • Bronze body construction • Fast and easy adjustment • Popular choice for residential and commercial applications • Water Savings up to 30%∆ (see page 12)

Specifications 25AUB-Z3 • Temperature Range: 33°F - 160°F (0.5°C - 71°C) Features • Maximum Working Pressure: 300psi (20.7 bar) • Union inlet connection • Adjustable Reduced Pressure Range: 25-75psi (172 - 517kPa) • Integral stainless steel strainer • Standard Reduced Pressure Setting: 50psi (345kPa) • Replaceable seat module • Bronze body construction Standards • Serviceable in line Meets requirements of ASSE Standard 1003 (ANSI A112.26.2), CSA Standard B356, • Bypass feature controls thermal Southern Standard Plumbing Code and Listed by IAPMO. expansion pressure** • High temperature resistant reinforced diaphragm for hot water Models • Standard construction includes Z3 25AUB-Z3 – NPT threaded female union inlet x NPT female outlet sealed epoxy coated spring cage and 25AUB-S-Z3 – Solder Union inlet x NPT female outlet corrosion resistant adjusting & cage 25AUB-QC-Z3 – Single Union – Quick-Connect union inlet screws for accessible outdoor or pit

installations Regulators Pressure & Automatic Control Valves 25AUB-DU-Z3 – Double Union – NPT threaded union female inlet and outlet 25AUB-S-DU-Z3 – Double Union – Solder union inlet and outlet 25AUB-DU-THDxPEX-Z3 – Double Union – NPT threaded female union inlet and PEX union outlet 25AUB-DU-CPVC-Z3 – Double Union – CPVC union inlet and outlet 25AUB-DU-LF-Z3 – Double Union body less union fittings 25AUB-DU-QC-Z3 – Double Union – Quick-Connect union inlet and outlet Options add Suffix:

G Gauge tapping 1⁄8" GG Gauge tapping and 160psi (11.0 bar) gauge HP High pressure range 75-125psi (5.2 – 8.6 bar) LP Low pressure range 10-35psi (69 – 241 kPa)

Z7 400psi (27.6 bar) initial pressure, 1⁄2" (20mm) models only add Prefix: C LF Lead Free* construction B For additional information, request literature ES-25AUB. *The combined metal components of this product contacted by potable water contain less than one half of one percent (0.5%) of lead by weight. D **NOTE: The bypass feature will not prevent the pressure relief valve from opening on the hot water supply system with pressure above 150psi (10.3 bar). A MODEL † SIZE (DN) DIMENSIONS (APPROX.) WEIGHT ABCD in. mm in. mm in. mm in. mm in. mm lbs. kgs.

25AUB-Z3 1⁄2 15 53⁄8 137 7 178 51⁄2 140 11⁄2 38 3.5 1.6 25AUB-Z3 3⁄4 20 55⁄16 135 7 178 51⁄2 140 11⁄2 38 3.5 1.6 25AUB-Z3 1 25 6 152 8 203 61⁄4 159 13⁄4 44 6.5 2.9 25AUB-Z3 11⁄4 32 83⁄4 222 9 229 67⁄8 175 21⁄8 54 10.0 4.5 25AUB-Z3 11⁄2 40 83⁄4 222 91⁄2 241 71⁄8 181 23⁄8 60 10.0 4.5 25AUB-Z3 2 50 93⁄4 235 111⁄4 286 8 203 31⁄4 83 15.0 6.8 † Dimensions for all models are shown on literature ES-25AUB. For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 5 WEIGHT D C N45BDU-M1 A 434343 2.5 2.5 3 1.1 1.1 1.4 16 16 16 ⁄ ⁄ ⁄ B in. in. mm lbs. kgs. 13 13 13 expansion pressure** accessible outdoor or pit installation outlet) option DU • Integral, stainless steel strainer • Thermoplastic seat and cage • Bronze body construction • Serviceable in line • Bypass feature controls thermal • Sealed spring cage on all models for Features • Double union connections (inlet and mm 116116116 1 1 1 16 16 16 ⁄ ⁄ ⁄ 9 9 9 in. mm 159159159 4 4 4 DIMENSIONS (APPROX.) 4 4 4 ⁄ ⁄ ⁄ 1 1 1 in. in. " – 1") mm 2 119119143 6 6 6 ⁄ 1 ( ABCD 16 16 8 ⁄ ⁄ ⁄ 5 11 11 (see page 12) ∆ 1520 4 4 Double Union – CPVC union inlet and outlet Double Union – PEX union inlet and outlet For assistance, contact your local authorized agent Watts or visit our website at www.watts.com Double Union – Quick-Connect union inlet and outlet SIZE (DN) Single Union – Quick-Connect union inlet 2 4 Double Union – Solder union inlet and outlet ⁄ ⁄ 1 3 Solder Union inlet x NPT female outlet in. mm in. Double Union – NPT threaded union female inlet and outlet NPT threaded union inlet x NPT female outlet NPT threaded female inlet x NPT female outlet

† Dimensions for all models are shown on literature ES-N45B. MODEL water supply system with above pressure 150psi (10.3 bar). less than one half of one percent (0.5%) of lead by weight N45BDU-M1 N45BDU-M1 N45BDU-M1 1 25 5 **NOTE: **NOTE: The bypass feature will not prevent the relief pressure valve from opening on the hot For additional information, request literature ES-N45B *The combined metal components of this product contacted by potable water contain add Suffix: GGG Gauge tapping Gauge tapping and 160psi (11.0 bar) gauge add Prefix: LF Lead Free* construction Options Models N45B-M1 – N45BU-M1 – N45BU-S-M1 – N45BU-QC-M1 – N45BDU-M1 – N45BDU-S-M1 – N45BDU-PEX-M1 – N45BDU-CPVC-M1 – Standards Meets of requirements ASSE Standard 1003 (ANSI A112.26.2) and CSA Standard B356. Certified by NSF to ANSI/NSF Standard 61-8 (LF N45B-M1 Models only). Listed by IAPMO, City of Los Angeles. Specifications • Range: 33°F – 180°F Temperature (0.5°C - 82°C) • Maximum Working 400psi Pressure: (27.6 bar) • Adjustable Reduced Range: Pressure 25 – 75psi (172 – 517 kPa) • Standard Reduced Setting: Pressure 50psi (345 kPa).

• Bronze body construction • Ideal for residential and commercial applications • Integral stainless steel strainer and built-in bypass • savings Water up to 30% Series Series N45B-M1 Water Pressure Reducing Pressure Water Valves N45BDU-QC-M1 – 6 1 Pressure Regulators & Automatic Control Valves *NOTE: The bypass feature will not prevent the pressure relief valve from opening on the hot the on opening from valve pressurerelief the prevent not will feature bypass The *NOTE: ES-N45B-L. literaturerequest information, additional For gauge bar) (11.0 160psi and tapping Gauge tapping Gauge GG G Suffix: add Options outlet and inlet Union Solder – Union –Double N45BDU-S – N45BDU N4 – 5BU-S – N4 5BU – N45B Models Angeles. Los of City IAPMO. by listed and B356; Standard CSA A112.26.2); (ANSI 1003 Standard ASSE requirementsof Meets Standards (345kPa) 50psi PressureSetting: Reduced Standard • 517kPa) – (172 75psi – 25 PressureRange: Reduced Adjustable • bar) (20.7 Pressure:300psi Working Maximum • 82˚C) – (0.5°C Temperature180˚F – 33˚F Range: • Specifications 30% to up Watersavings • installations pit or outdoor accessible for models all on cage spring Sealed • applications commercial and residential for Ideal • construction body Bronze • N45B Series Water Pressure Reducing ValvesWaterPressureReducing 4BU25 2 12 228 9 9 50 50 2 1 N45BDU-S 2 N45BDU-S N45BDU 4BUS1 N45BDU-S 1 1 N45BDU N45BDU MODEL water supply system with pressure above 150psi (10.3 bar). (10.3 150psi pressureabove with system supply water NPT threaded female inlet x NPT female outlet female NPT x inlet female threaded NPT NPT threaded union inlet x NPT female outlet female NPT x inlet union threaded NPT and outlet and inlet female union threaded NPT – Union Double Solder Union inlet x NPT female outlet female NPT x inlet Union Solder n min. mm in. 1 1 1 1 ⁄ ⁄ ⁄ ⁄ 2 4 2 4 SIZE (DN) SIZE For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 08 7 40 8 32 8 40 32 ∆ (see page 12) page (see (1 15 3 1 1 3 3 ⁄ ⁄ ⁄ ⁄ ⁄ 16 ⁄ 4 16 8 8 4 " – 2") – " ABCD 3 12 10 10 235 207 10 201 10 213 213 mm in. 9 5 9 5 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 16 16 2 2 DIMENSIONS (APPROX.) DIMENSIONS 1 8 8 8 319 8 267 8 262 8 319 267 262 mm in. 7 7 7 7 7 7 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 8 8 8 8 8 8 2 1 1 1 225 1 225 1 225 1 225 225 225 mm • Sealed spring cage on all models for models all on cage spring Sealed • thermal controlsfeature Bypass • line in Serviceable • construction body Bronze • cage & seat Thermoplastic • strainer steel stainless Integral • Doubleunion inlet outlet& connections • Features accessible outdoor or pit installations pit or outdoor accessible pressure*expansion B n m b.kgs. lbs. mm in. 7 7 7 5 7 5 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 8 8 8 8 794.1 3.6 9 2.9 4.1 8 3.6 6.5 47 9 2.9 41 8 36 6.5 47 41 36 A WEIGHT C N45BDU D 7 Pressure Regulators & Automatic Control Valves 1 D C WEIGHT N45BDU-EZ-M1 A 434343 6.5 8 9 2.9 3.6 1.4 16 16 16 ⁄ ⁄ ⁄ 11 11 11 B connections (option DU) expansion pressure** adjustment • Easily adjustable setting pressure • Double union inlet & outlet • Integral stainless steel strainer • Thermoplastic cage & seat • Bronze body construction • Serviceable in line • Bypass feature controls thermal Features • Factory calibrated outlet pressure 111111111 1 1 1 8 8 8 ⁄ ⁄ ⁄ 3 3 3 154154154 4 4 4 DIMENSIONS (APPROX.) 16 16 16 ⁄ ⁄ ⁄ 1 1 1 " – 1") 2 ⁄ 1 ( 119119143 6 6 6 ABCD 16 16 8 ⁄ ⁄ ⁄ 5 11 11 (see page 12) 1520 4 4 ∆ SIZE (DN) Double Union – Solder union inlet and outlet 2 4 ⁄ ⁄ in. mm in. mm in. mm in. mm in. mm lbs. kgs. For assistance, contact your local authorized agent Watts or visit our website at www.watts.com Solder Union inlet x NPT female outlet 1 3 Double Union – NPT threaded union female inlet and outlet NPT threaded union inlet x NPT female outlet NPT threaded female inlet x NPT female outlet

MODEL † † Dimensions for all models are shown on literature ES-N45B-EZ. water supply system with above pressure 150psi (10.3 bar). less than one half of one percent (0.5%) of lead by weight N45BDU-EZ-M1 N45BDU-EZ-M1 N45BDU-EZ-M1 1 25 5 **NOTE: **NOTE: The bypass feature will not prevent the relief pressure valve from opening on the hot For additional information, request literature ES-N45B-EZ. *The combined metal components of this product contacted by potable water contain add Suffix: GGG Gauge tapping Gauge tapping and 160psi (11.0 bar) gauge add Prefix: LF Lead Free* construction Options Models N45B-EZ-M1 – N45BU-EZ-M1 – Meets requirements Meets of requirements ASSE Standard 1003 (ANSI A112.26.2); CSA Standard B356; and listed by IAPMO. N45BU-EZ-S-M1 – N45BDU-EZ-M1 – N45BDU-EZ-S-M1 – Standards • Range: 33˚F – 180˚F Temperature (0.5°C – 82˚C) • Maximum Working 400psi Pressure: (27.6 bar) • Adjustable Reduced Range: Pressure 25-75psi (172 - 517kPa) • Standard Reduced Setting: Pressure 50psi (345kPa) Specifications

• Bronze body construction • Ideal for residential and commercial applications • Factory calibrated outlet adjustment pressure • Easily adjustable setting pressure • savings Water up to 30% Series Series N45B-EZ-M1 Water Pressure Reducing Pressure Water Valves 8 1 Pressure Regulators & Automatic Control Valves *NOTE: The bypass feature will not prevent the pressure relief valve from opening on the hot the on opening from valve pressurerelief the prevent not will feature bypass The *NOTE: ES-N45BDU-EZ-L. literaturerequest information, additional For gauge bar) (11.0 160psi and tapping gauge tapping gauge GG G Suffix: add Options – N45BDU-EZ-S – N45BDU-EZ Models IAPMO. by listed and B356; Standard CSA A112.26.2); (ANSI 1003 Standard ASSE requirementsof Meets Standards (345kPa) 50psi PressureSetting: Reduced Standard • 517kPa) – (172 75psi – 25 PressureRange: Reduced Adjustable • bar) (20.7 Pressure:300psi Working Maximum • 82˚C) – (0.5˚C Temperature180˚F – 33˚F Range: • Specifications 30% to up Watersavings • pressuresetting adjustable Easily • pressureadjustment outlet calibrated Factory • applications commercial and residential for Ideal • construction body Bronze • N45BDU-EZ Series Water Pressure Reducing ValvesWaterPressureReducing 4BUE 09289 228 9 9 50 50 2 1 2 N45BDU-EZ-S N45BDU-EZ-S N45BDU-EZ 4BUE- 1 1 1 N45BDU-EZ-S N45BDU-EZ N45BDU-EZ water supply system with pressure above 150psi (10.3 bar). (10.3 150psi pressureabove with system supply water MODEL Double Union - NPT threaded union female inlet and outlet and inlet female union threaded NPT - Union Double Double Union - Solder Union inlet and outlet and inlet Union Solder - Union Double n mi.m n m n mi. mls kgs. lbs. mm in. mm in. mm in. mm in. mm in. 1 1 1 1 For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For ⁄ ⁄ ⁄ ⁄ 2 4 2 4 SIZE (DN) SIZE ∆ 08 7 40 8 32 8 40 32 (see page 12) page (see 15 3 1 3 3 ⁄ ⁄ ⁄ ⁄ ⁄ 16 4 16 8 8 ABCD (1 3 9 9 9 235 207 9 201 9 213 213 1 ⁄ 4 " – 2") – " 7 7 7 5 7 5 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 8 8 8 8 DIMENSIONS (APPROX.) DIMENSIONS 5 0 1 1 1 204 1 204 1 204 1 8 204 8 204 8 204 251 8 244 8 240 8 251 244 240 • Bypass feature controls thermal controlsfeature Bypass • line in Serviceable • construction body Bronze • strainer steel stainless Integral • outlet & inlet union Double • pressuresetting adjustable Easily • pressureoutlet calibrated Factory • Features expansion pressure*expansion connections adjustment B 7 7 7 5 7 5 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 8 8 8 8 791.4 3.6 9 2.9 1.4 8 3.6 6.5 47 9 2.9 41 8 36 6.5 47 41 36 A N45BDU-EZ WEIGHT C D 9 Pressure Regulators & Automatic Control Valves 1 1 Series X65B (1⁄2" – 2")

Pressure Regulators & Automatic Control ValvesControl Automatic & PressureRegulators Water Pressure Reducing Valves

• Ideal for residential or track housing segment • Cartridge style valve • Quick and easy installation or service in-line • Orderable three ways: complete regulator, rough-in kit, cartridge assembly • Sealed spring cage on all models for accessible outdoor or pit installations

Standards Certified to ASSE Standard 1003, and listed by ASSE and IAPMO. Features • Cartridge style valve • Double-union connections (inlet and Models outlet) option DU X65B – NPT threaded female inlet x NPT female outlet • 100% balanced valve provides reliable X65BU – NPT threaded union inlet x NPT female outlet flow performance X65BUS – Solder union inlet x NPT female outlet • Integral stainless steel strainer X65BDU – Double Union – NPT threaded union female inlet and outlet • Thermoplastic seat X65BDUS – Double Union – Solder union inlet and outlet • Bronze body construction X65BU-QC – Single Union – Quick-Connect union inlet x NPT female outlet* • Serviceable in-line X65BDU-QC – Double Union – Quick-Connect union inlet and outlet* • Bypass feature controls thermal X65BDU-CPVC – Double Union – CPVC union inlet x CPVC union outlet** expansion pressure* X65BDU-PEX – Double Union – PEX union inlet x PEX union outlet* • High-temperature resistant reinforced X65B-HP – High Pressure – NPT threaded female inlet x NPT female outlet diaphragm for hot water *For sizes 1⁄2", 3⁄4", 1 (15, 20, 25mm) only • Greater flow performance with lower **For sizes 3⁄4" , 1" (20, 25mm) only fall off pressure for consistent operation Options *NOTE: The bypass feature will not prevent the pressure relief valve from opening on Add Suffix the hot water supply system with pressure G – Gauge tapping, 1⁄8" (3mm) above 150psi (10.3 bar). GG – Gauge tapping and 160psi (11.0 bar) gauge D HP – High pressure range 50–150psi (3.4 – 10.3 bar)

A E F

SIZE (DN) DIMENSIONS WEIGHTS A B (MAX) STD B (MAX) HP C D (DIA) E (Threaded) E (Sweat) E (QC) F (Threaded) F (Sweat) F (QC) in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.

1⁄2 15 3 76.7 57⁄16 137.7 611⁄16 169.9 15⁄16 32.8 27⁄16 61.2 311⁄16 93.0 35⁄8 91.9 41⁄2 115 45⁄16 109.2 41⁄4 107.2 6 153 1.43 0.65 3⁄4 20 31⁄8 79.8 57⁄16 137.7 611⁄16 169.9 15⁄16 32.8 27⁄16 61.2 33⁄4 96.0 4 101.1 413⁄16 122 47⁄16 112.3 413⁄16 122.4 61⁄2 165 1.52 0.69 1 25 39⁄16 90.4 63⁄16 157.2 714⁄16 199.9 13⁄8 34.5 23⁄4 70.6 415⁄16 110.2 49⁄16 116.1 55⁄16 135 51⁄8 130.0 59⁄16 141.7 71⁄16 179 2.22 1.01 11⁄4 32 45⁄16 110.2 615⁄16 176.0 913⁄16 248.9 19⁄16 39.40 31⁄4 81.8 55⁄8 142.7 53⁄8 136.9 ––67⁄8 175.3 67⁄16 163.6 ––3.61 1.64 11⁄2 40 51⁄2 140.2 113⁄4 297.9 163⁄4 426.0 17⁄8 47.50 49⁄16 115.8 613⁄16 142.7 611⁄16 169.9 ––81⁄16 205.2 77⁄8 199.6 ––9.27 4.20 2 50 51⁄2 140.2 113⁄4 297.9 163⁄4 426.0 17⁄8 47.50 49⁄16 115.8 613⁄16 173.5 615⁄16 176.5 ––81⁄8 206.8 83⁄8 212.9 ––9.59 4.35

10 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com (1⁄2" – 1") Series N55B-M1 1 Water Pressure Reducing Valves • Bronze body construction • Ideal for residential and commercial applications • Integral stainless steel strainer and built-in bypass • Water savings up to 30%∆ (see page 12) Specifications N55BU-M1 • Temperature Range: 33˚F – 180˚F (0.5°C – 82˚C) • Maximum Working Pressure: 400psi (27.6 bar) • Adjustable Reduced Pressure Range: 25-75psi (172 - 517kPa) Features • Standard Reduced Pressure Setting: 50psi (345kPa) • Double union inlet & outlet Standards connections (option DU) • Integral stainless steel strainer Meets requirements of ASSE Standard 1003 (ANSI A112.26.2) and CSA Standard B356. Certified by NSF to ANSI/NSF Standard 61-8 (LF N55B-M1 Models only). Listed by • Thermoplastic seat IAPMO. City of Los Angeles • Bronze body construction • Serviceable in line • Bypass feature controls thermal expansion pressure** Models • Sealed spring cage on all models for N55B-M1– NPT threaded female inlet x NPT female outlet accessible outdoor or pit installations N55BU-M1 – NPT threaded union inlet x NPT female outlet

N55BU-S-M1 – Solder Union inlet x NPT female outlet Regulators Pressure & Automatic Control Valves N55BU-QC-M1 – Single Union x Quick-Connect union inlet N55BDU-M1 – Double Union – NPT threaded union female inlet and outlet N55BDU-S-M1 – Double Union – Solder union inlet and outlet N55BDU-PEX-M1– Double Union – PEX union inlet and outlet N55BDU-CPVC-M1 – Double Union – CPVC union inlet and outlet N55BDU-QC-M1 – Double Union – Quick-Connect union inlet and outlet

Options add Suffix: G Gauge tapping C GG Gauge tapping and 160psi (11.0 bar) gauge BC LP Low pressure range 10 – 35psi (69 – 241 kPa) add Prefix: LF Lead Free* construction D For additional information, request literature ES-N55B.

*The combined metal components of this product contacted by potable water contain less than one half of one percent (0.5%) of lead by weight **NOTE: The bypass feature will not prevent the pressure relief valve from opening on the hot A water supply system with pressure above 150psi (10.3 bar).

SIZE (DN) DIMENSIONS (APPROX.) WEIGHT ABCD in. mm in. mm in. mm in. mm in. mm lbs. kgs.

1⁄2 15 41⁄16 103 61⁄4 159 49⁄16 116 111⁄16 43 1.5 .68 3⁄4 20 41⁄16 103 61⁄4 159 49⁄16 116 111⁄16 43 1.5 .68 1 25 47⁄8 124 61⁄4 159 49⁄16 116 111⁄16 43 1.75 .79

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 11 D N55BDU C WEIGHT A 364147 2.5 2.5 3 1.1 1.1 1.4 364147 2.5 2.5 3 1.1 1.1 1.4 8 8 8 8 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 5 7 5 7 7 7 in. in. mm lbs. kgs. B connections expansion pressure** accessible outdoor or pit installations Features • Bronze cage • Double union inlet & outlet • Integral stainless steel strainer • Thermoplastic seat • Bronze body construction • Serviceable in line • Bypass feature controls thermal • Sealed spring cage on all models for mm 225225225 1 1 1 225225225 1 1 1 8 8 8 8 8 8 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 7 7 7 7 7 7 in. mm 262267319 8 8 8 262267319 8 8 8 DIMENSIONS (APPROX.) 2 2 16 16 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 5 9 5 9 in. in. mm 213213 10 201 10 207235 10 10 12 ABCD " – 2") 4 8 8 16 4 ⁄ 16 ⁄ ⁄ ⁄ ⁄ ⁄ 3 3 1 1 3 15 (1 (see below) ∆ 3240 8 32 8 40 7 8 A water savings test program concluded that reducing the water supply pressure from 80psi to 50psi For assistance, contact your local authorized agent Watts or visit our website at www.watts.com SIZE (DN) 4 2 4 2 ⁄ ⁄ ⁄ ⁄ 1 1 1 1 in. mm in. Solder U nion inlet x NPT female outlet Solder U Double Union – NPT threaded union female inlet and outlet NPT threaded union inlet x NPT female outlet NPT threaded female inlet x NPT female outlet

Water Water Savings: (551.2 – 344.8 kPa) resulted in a water savings of 30%. For additional information on conserving water request and energy, our F-23QA – brochure “23 Questions and Answers About Reducing Pressure Water Valves”. water supply system with above pressure 150psi (10.3 bar). ∆ N55BDUN55BDU-S 1 1 N55BDU 1 MODEL N55BDU-SN55BDU-S 1 2 50 9 N55BDU 2 50 9 228 12 Water Pressure Reducing Pressure Water Valves For additional information, request literature ES-N55B-L. **NOTE: The bypass feature will not prevent the relief pressure valve from opening on the hot add Suffix: GGG Gauge tapping Gauge tapping and 160psi (11.0 bar) gauge Options N55BDU-S –Double Union – Solder Union inlet and outlet Models N55B – N55BU – 5BU-S – N5 N55BDU – Standards Meets of requirements ASSE Standard 1003 (ANSI A112.26.2); CSA Standard B356; and listed by IAPMO. Specifications • Range: 33˚F – 180˚F Temperature (0.5°C – 82˚C) • Maximum Working 300psi Pressure: (20.7 bar) • Adjustable Reduced Range: Pressure 25 – 75psi (172 – 517 kPa) • Standard Reduced Setting: Pressure 50psi (345 kPa)

• Bronze body construction • Ideal for residential and commercial applications • Sealed spring cage on all models for accessible outdoor or pit installations • savings Water up to 30% Series Series N55B 12 1 Pressure Regulators & Automatic Control Valves Connection: Size: Example: Fits ValveModel: Fits Type:Nipple Designation: Kit Jumper debris downstream of the valve. the of downstream debris fromprotectionprovide to screen strainer steel stainless a include kits jumper The valve. the to jumper the from out change quick permitting and valve pressurereducing water a of installation the to prior completed be to piping the allowing length, lay valve the matches nipple jumper the of length The threads. union male with nipple pipe plastic or brass a and washers, connections, union with complete come Kits Jumper vandalism. or theft from loss reduces kit jumper the sites, job unsecured On valve. pressurereducing water the of installation the to prior flushing pipe facilitates and pressureloss and leaks for system piping building the of testing permits jumper temporary a of use The systems. supply water potable on valve pressurereducing water a of installation actual the to prior bypass, temporary a as construction new in used are kits Jumper TemporaryValvesWaterPressureReducing for Bypass Kits Jumper How to order jumper kits jumper order to How For additional information, request literature ES-JumperKits. literaturerequest information, additional For – E – D – C – B – A of: consists Kit View Exploded Kit Jumper M = Male brass solder S = Female copper solder copper Female = S solder brass Male = M 1 25 = 25AUB-Z3 345 = N45, N55 ( N55 N45, = 345 25AUB-Z3 = 25 Plastic = P Brass = B ⁄ 2 Screen Union Nut (2) Nut Union Sweat TailpieceSweat (2) ", Jumper Nipple Jumper Washer(2) Fiber 3 ⁄ 4 ", 1", 1 1", ", 3 ⁄ 4 1 " JK P-345 S S P-345 JK " ⁄ 4 E ", 1 ", For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 1 ⁄ 2 ", 2" ", C B A D 1 ⁄ 2 ", 1") 55 = N45, N55 (1 N55 N45, = 55 1") ", 3 ⁄ 4 " JK P-345 S P-345 JK " 1 ⁄ 4 " - 2") - " ordering information. O-rings (ordered separately) are required. ReferWhen to literature removing Jumper PL-RP-GP Nipple for and O-ring inserting the water pressureand reducing tailpieces valve, as described two above. Jumper Kits Include: Jumper Nipple, strainer screen, 2 fiber washers, 2 union nuts Female x Female Copper Sweat Tailpiece COMPLETE KITS WITH BRASS NIPPLE Male x Male Brass Sweat Tailpiece Female Copper Sweat x Male Brass Sweat Tailpiece Female x Female Copper Sweat Tailpiece JUMPER KITS COMPLETE KITS WITH PLASTIC NIPPLE JK-B-25 S JK-P-25 S JK-B-55 S JK-B-55 S JK-B-55 S JK-B-25 S JK-B-345 S JK-B-345 S JK-B-25 S JK-P-345-MM S JK-P-345-FM S JK-P-345-FM S JK-P-55 S JK-P-55 S JK-P-55 S JK-P-25 S JK-P-345 S JK-P-345 S JK-P-25 S Model JK-B-25 S JK-B-25 S JK-P-25 S JK-P-25 S Jumper Kit Jumper in. 1 1 1 1 1 1 1 1 3 3 3 3 3 1" 1" 2" 1" 1" 1" 2" 1" 2" 2" 1 1 1 1 1 1 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ 4 4 4 4 4 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ mm 2 2 4 4 2 2 4 4 " " " " " " " " " " " " " 25 25 50 25 25 25 50 25 50 50 Size 20 20 20 20 20 40 40 32 32 40 40 32 32 13 Pressure Regulators & Automatic Control Valves 1 C 223S D 223S A WEIGHTS As 223 " which is iron) 646475 4.5 5.087 7.0 2.0 2.3 19.5 6.0 3.2 6.5 8.8 9.5 2.7 2.9 23.5 4.3 6.8 2 ⁄ 1 N separate strainer thermal expansion pressure* accessible outdoor or pit installations and seat orifice for super capacity performance 2 • Serviceable in line • Series 223S furnished with • Optional bypass feature controls • Sealed spring cage on all models for Features • Enlarged diaphragm, spring cage • Bronze body construction (except N (223S) 2 2 16 16 ⁄ ⁄ ⁄ ⁄ 1 1 7 15 5470 2 7086 3 3 86 4 76 5 102 9.0 127 30.0 4.1 32.5 13.6 12.0 14.8 37.5 59.0 5.4 17.0 26.8 D (223) 8 4 4 8 8 ⁄ ⁄ ⁄ ⁄ ⁄ 1 3 3 3 3 159159 2165172 2 2 50251 2 50273 2 2 273 3 2 3 C 4 4 ⁄ ⁄ 4 4 2 4 8 ⁄ ⁄ ⁄ ⁄ ⁄ 3 3 1 1 1 3 7 ") 2 DIMENSIONS (APPROX.) ⁄ 1 511 10 262287 6 375 6 425 9 10 " – 2 2 ⁄ 8 16 16 4 4 ⁄ ⁄ ⁄ ⁄ ⁄ 1 As (223S) 1 3 3 ( 15 15 ", 1" (15, 20, 25mm) 50 – 145psi (3.4 – 10.0 bar); 108108121 9 9 10 171 229 229 14 6 6 4 ⁄ 3 ", A (223) 2 ⁄ 4 4 4 4 ⁄ ⁄ ⁄ ⁄ 1 1 1 3 3 in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs. For assistance, contact your local authorized agent Watts or visit our website at www.watts.com " (40 – 65mm) 50 – 95psi (3.4 – 6.6 bar) 2 ⁄ 1 " (65mm) has iron body construction 2 ⁄ " – 2" (15 – 50mm) have bronze body construction 1 2 NPT female inl et with strainer x NPT threaded female outlet NPT female inl " (32mm) 50 – 120psi (3.4 – 8.3 bar); " – 2 ⁄ 3240 Bronze Bronze65 5 6 Iron 127 11 9 229 20 1520 Bronze Bronze 4 4 4 2 1 ⁄ ⁄

1 1 NPT female inlet x NPT threaded female outlet 1 Built-in bypass feature 1

2 2 4 ⁄ ⁄ ⁄ SIZE (DN) BODY " – 2" (15 – 50mm) Meets of requirements ASSE Standard 1003 (ANSI A112.26); CSA 2 4 ⁄ ⁄ 2 50 Bronze 8 203 16 1 25 Bronze 4 1 1 1 2 in. mm 3 1 ⁄ water supply system with above pressure 150psi (10.3 bar). 1 2 1 • Size 2 Standard Standard B356; Southern Standard Plumbing Code, Military and Standard MIL-V-18146B listed by IAPMO. For additional information, request literature ES-223. *NOTE: The bypass feature will not prevent the relief pressure valve from opening on the hot LP Low range pressure 10-35psi (69 – 241 kPa) HP High range pressure Options add Suffix: B 223 – 223-S – Models 1 Standards Specifications • Range: 33°F – 160°F Temperature (0.5°C – 71°C) • Maximum Working 300psi Pressure: (20.7 bar) • Adjustable Reduced Range: Pressure 25-75psi (172 – 517kPa) • Standard Reduced Setting: Pressure 50psi (345kPa) • Size

• One of the most proven regulator designs available • For commercial, institutional and industrial water control pressure applications • Available with (223S) or without (223) a strainer Series Series 223, 223S High Capacity Reducing Pressure Water Valves 14 1 Pressure Regulators & Automatic Control Valves • installations pit waterworks for models all on cage spring Sealed • For commercial, institutional• and industrial applications N223BS N223B, Series Super Capacity Water Pressure Reducing ValvesWaterPressureReducing Capacity Super Super Capacity Water Pressure Reducing ValvesWaterPressureReducing Capacity Super • construction body Iron • For commercial or industrial• applications connections Flanged • N223F,Series N223FS **NOTE: The bypass feature will not prevent not will feature bypass The **NOTE: PressureSetting: Reduced Standard • PressureRange: Reduced Adjustable • Pressure:300psi Working Maximum • Temperature160°F – 33°F Range: • Specifications • • Models seated Single • pressureregulation Close • regulator water control Remote • MaximumWorking Pressure: • 175psi Temperature160°F – 33°F Range: • connections flanged (80mm), 3" Size: • Specifications Series 127W,Series F127W High Capacity Water Pressure Reducing ValvesWaterPressureReducing Capacity High above 150psi (10.3 bar). (10.3 150psi above pressurewith system supply water hot the on opening from valve pressurerelief the Triplecoated with special corrosion preventative materials superior to hot dip galvanizing Triplecoated with special corrosion preventative materials superior to hot dip galvanizing 50psi (345kPa) 50psi 517kPa) – (172 75psi – 25 bar) (20.7 71°C) – (0.5°C connections, iron body iron connections, F127W body bronze connections, outlet female x inlet female 127W (12.1bar) 71°C) – (0.5°C WSP bar) (8.6 125psi Class - 3" (80mm) NPT threaded (80mm) 3" - - 3", 4" (80, 100mm) flanged 100mm) (80, 4" 3", - For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For requestliterature ES-N223B. Foradditional information, 125psi – 75 pressurerange High HP Suffix: add Options strainer with outlet female threaded NPT - N223B-S outlet female threaded – N223B Models • Model N223FS includes strainer includes N223FS Model • PressureSetting: Reduced Standard • PressureRange Reduced Adjustable • • The 4" (100mm) size is tapped for the for tapped is size (100mm) 4" The • Temperature160°F – 33°F Range: • 25-100psi PressureRange: Reduced • Pressure:175psi Working Maximum • Specifications 50psi (345 kPa) (345 50psi kPa). 517 – (172 75psi – 25 auxiliary regulator auxiliary an and line bypass a of installation 71°C) – (0.5°C pressuresupply the on depending kPa) 690 – (172 bar). (12.1 (517 – 861 kPa) 861 – (517 (3", 4") (3", NPT threaded female inlet x NPT x inlet female threaded NPT (3") NPT threaded female inlet x inlet female threaded NPT (2 1 ⁄ 2 " – 3") – " ES-127Wor ES-F127W. Foradditional information, request literature • Sealed spring cage on all models for models all on cage spring Sealed • controlsfeature bypass Standard • separate with furnished N223S Series • line in Serviceable • construction body Bronze • cage spring diaphragm, Enlarged • Features requestliterature ES-N223F. Foradditional information, accessible outdoor or pit installations pit or outdoor accessible pressure**expansion thermal strainer performance capacity super for orifice seat and F127W N223B N223F 15 Pressure Regulators & Automatic Control Valves 1 2300 N250 123LP " (20mm) 4 ⁄ 3 " (15mm) or 2 ⁄ 1 25 – 75psi (172 – 517 kPa) (0.5°C – 71°C) Nominal size (276 – 345 kPa) For additional information, For additional ES-N250. literature request • Adjustable Reduced Range: Pressure • Range: 33°F – 160°F Temperature • – 40 50psi Range: Pressure Adjustable For additional information, information, additional For ES-123LP. literature request • ") 4 ⁄ ") 3 4 ⁄ 3 ", 2 ⁄ ", 1 ( 2 ⁄ 1 ( (3" – 6") For assistance, contact your local authorized agent Watts or visit our website at www.watts.com " (15, 20mm), NPT 4 ⁄ 3 ", 2 ⁄ 1

(13.8 bar) (13.8 (172.4 kPa) (0.5°C – 60°C) (17.2 bar) (17.2 50psi (345 kPa) threaded threaded female inlet and outlet connections creep creep and costly maintenance rapidly, as on domestic rapidly, water systems Note: Cast Iron body regulators are not intended for buried or pit services. pit or buried for intended not are regulators body Iron Cast Note: Iron Iron Body Reducing Pressure Water Valves

• Integral strainer • Unitized construction for ease of maintenance • For standard capacity domestic water regulation pressure Series Series N250 • Reduced Setting: Pressure 25psi • Range: 33°F – 140°F Temperature Specifications • 200psi Pressure: Working Maximum Specifications • Sizes: • Standard Reduced Setting: Pressure • Maximum Working Pressure: 250psi • Pressure: Working Maximum • balanced Pressure design fluctuations, pressure eliminates pressure water hammer, Direct Direct Operated Reducing Pressure Water Valves For additional information, request literature ES-2300. literature request information, additional For

• Designed for dead-end water service where the flow is intermittent and changes • Ideal for fast acting equipment such as flushometers and snap cocks Series 2300

• NPT threaded female inlet and outlet connections Series 123LP Water Pressure Reducing Pressure Water Valves 16 1 Pressure Regulators & Automatic Control Valves For additional information, request literature C-CACV.literaturerequest information, additional For Steel Stainless • TubingFittings & Viton • Elastomers Bronze • Steel Stainless • Steel Carbon • Materials Options Series 127 Series 118 Series 116 Series 115 Series 114 Series 113 Series 110 application. specific your for ACV proper the sizing and selecting in assistance detailed for Representative Wattsyour Consult series. valve each in available are combinations functional Numerous Models ValveTrim: Coatings: Cover: & Body Angle Pattern: Angle Globe Pattern: Globe Specifications available functions Combination or On-Off, Modulating, • Ends Flanged or Threaded • Pattern Angle or Globe • ValveDiaphragm Controlled Pilot • Series “A” ValvesControl Automatic : 400psi MWP (27.6 bar) (27.6 MWP 400psi Flanged: 300 Flanged: 150 Threaded: Tubing/Fittings: (std) Buna-N Elastomers: ® NSF Approved Fusion Bonded Epoxy Coated and Lined and Coated Epoxy Bonded Fusion Approved NSF 400psi MWP (27.6 bar) (27.6 MWP 400psi – – – – – – – 1 (Check) BackpressureControl) or Sustaining, (PressureRelief, Control) (PressureReducing Control) (Rate-of-Flow Control) Pump & (Solenoid Control) Level / (Float (Altitude / Level Control) Level / (Altitude 1 ⁄ 250psi MWP (17.2 bar) (17.2 MWP 250psi 4 " – 8": Stainless Steel 10" – 24": Bronze 24": – 10" Steel Stainless 8": – " 1 Ductile Iron ASTM A536 64-45-12 A536 ASTM Iron Ductile 1 1 Copper and Brass and Copper 1 ⁄ ⁄ 4 4 " – 12" (32mm – 300mm) – (32mm 12" – " For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For " – 24" (32mm – 600mm) – (32mm 24" – " • FDA approved diaphragm approved FDA • bonded fusion approved NSF 100% • stem Topguided bottom and • seat non-edged life Long • • Exclusive "Quad-Seal" seat disc seat "Quad-Seal" Exclusive • Features water systems water drinking in use for Approved coefficient flow valve improves and maintenance requiredfor time the Shortens diaphragm. valve main the of life the extending greatlycorrosion, and rust Reduces coated and lined epoxy rates flow peak and low,intermediate, at characteristics throttling stable and alignment seat-to-disc positive Assures performance low-flow superior and life seat longer for Allows closure positive drip-tight, Retained on 3 on Retained 1 ⁄ 2 sides. Provides sides. ACV 17 Pressure Regulators & Automatic Control Valves 1 H560 IR-56 D SS263AP C A B 3-Way Regulator-Stainless Steel Regulator-Stainless 3-Way 3-Way Regulator-Brass 3-Way 2-Way Regulator-Brass 2-Way For additional information, request literature IS-IR-56/H560G. For additional information, request literature ES-560/H560 or IS-IR-56/H560G. For additional information, request literature ES-26A, 263. Models 26A 263A SS263A WEIGHT 50 25 15 10 2222 1622 16 454 22 16 454 22 16 454 22 16 454 22 16 454 16 454 454 8 8 8 8 8 8 8 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 7 7 7 7 7 7 7 79 79 or 50 – 175psi for 10 – 125psi for 3 – 50psi for 1 – 25psi 8 8 ⁄ ⁄ ") 1 1 Water regulation for grid systems. grid for regulation Water 2 ⁄ ") – 1 4 ⁄ " (3mm) NPT female side tapping 3 8 ⁄ for gauge (10.3 bar) 10 – 60psi (68.9 – 413.7 kPa) (275.8 kPa) 1 " (20mm) female inlet and male outlet male and inlet female " (20mm) " – 4 9898 398 3 76 3 76 76 ⁄ 124 4 100 124 4 100 8 Reduced Pressure Ranges: Pressure Reduced at: set Std.psi Suffix Suffix D Suffix Suffix C Suffix Suffix B Suffix Suffix A • Maximum Working 150psi Pressure: • Adjustable Reduced Range: Pressure • Reduced Setting: Pressure 40psi • Delivery up to 250 gph (946 lph) • hose connections. Max. pressure 150psi pressure Max. connections. hose (68.9 – 10 60psi from adjustable bar), (10.3 (276 40psi at set Standard kPa). – 413.7 gallons 250 to up capacity Delivery kPa). recreation- for used Also lph). (946 hour per by Listed vehicles. al IAPMO (20.7 bar). Maximum temperature 140°F (60°C) H560 3 ⁄ " x 1 4 BCD ( ⁄ DIMENSIONS (APPROX.) 3 8 8 8 8 8 ⁄ ⁄ ⁄ ⁄ ⁄ 7 7 7 7 7 ", 4 ⁄ " 1 ") 4 ⁄ 4 1 ⁄ 5454 4 4 100 3 5454 3 54 3 54 3 54 4 4 100 3 3 ( " x 8 A ⁄ 1 " and 4 4 4 4 4 4 4 ( 8 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 1 1 1 1 " low gauge pressure port and is available with all stainless 1 4 ⁄ 1 " (3-15mm) trim 2 ⁄ ® 1 32 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com 82 82 1015 2 2 1015 2 2 ", 8 ⁄ 3 8 2 4 8 2 8 4 ", ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ SIZE (DN) 4 in. mm in. mm in. mm in. mm in. mm oz. gm. 3 1 1 3 1 1 1 ⁄ 1 ", 8 ⁄ " (3mm) side tapping (plugged) 1 8

⁄ 1

has female threaded

– " (20mm) hose connection female connection hose (20mm) " 4 ⁄ 26A 26A 26A 26A

steel construction, specify SS-263AP Series 263A has extra Specify suffix letter for reduced pressure 263A 263A 263A inlet x male outlet male x inlet NPT threaded female inlet and outlet connections bar) (20.7 3 grid systems and recreational vehicles and recreational grid systems outlet tors for industrial, process, plumbing and OEM applications such as travel trailers. Consult factory for special requirements. using them with other liquids, please consult the factory equipment, equipment, drinking fountains and many other applications. We recommend the use of strainers with all regulators Model

range required Series 560 Mini Water Pressure Mini Regulators Pressure Water • • for gauge. Initial up pressures to 300psi Bronze Water Pressure Regulators Bronze Pressure Water Small Pressure Small Regulators Pressure • • Hose connection, male inlet x male Specifications • for low cost regulator Dependable, Series IR-56 Models 560 • General purpose brass body regula- • Sizes: Specifications

• Brass or stainless steel body regulators suitable for water and No. 2 fuel oil. Before Series Series 26A, 263A (3 and 8mm) inlet and outlet connections. outlet and inlet 8mm) and (3 Female • 300psi Pressure: Working Maximum • 140ºF (60°C). Maximum Temperature: • Available with Viton • Readily meets for requirements use in beverage dispensing and paint spraying • • 18 1 Pressure Regulators & Automatic Control Valves Series 152A, 252A 152A, Series Process Steam PressureRegulators Steam Process • Sensitivity adjustment feature for feature adjustment Sensitivity • volume Fullminimumwithpressure drop • reduced to sensitive Highly • Alsoused onsterilizers, process lines, • Forautoclaves, steam tables/irons, • • Red indicator hand “holds” at highest at “holds” hand indicator Red • • For other liquids, consult factory consult liquids, other For • 2 No. body,and brass water Forged for • Mini Plastic WaterPressureRegulators Plastic Mini • For testing water supply pressurewithin supply water testing For • 215 Series • Specifications water deionized with used be Can • and OEM purpose, general For • corrosion superior Compact, • P60 Series 5S 0– 012 7 25 1 50 – 10 152SS 50 – 10 152SS 5S 0– 50 – 10 152SS Precision Regulator for Low PressuresLow for Regulator Precision WaterPressureTest Gauges Model 276H300, IWTG 276H300, Model 5A5– 01 40 – 5 152A 5A3–1 57 50 – 10 25 252A 1 15 – 3 152A 5A5– 025 2 14 229 9 50 50 2 – 10 252A 40 – 5 1 152A 15 – 3 152A 15 – 3 15 – 3 152A 152A critical flow critical pressurechanges testingfixtures andoil lines vulcanizersand single radiators reading registeredreading system distribution a 1 fuel oil fuel irrigation applications irrigation regulatorsresistant ⁄ 4 " (8mm) NPT female connections female NPT (8mm) " MODEL 3 1 3 1 3 1 n mi.m n mi. mi.m b.kgs. lbs. mm in. mm in. mm in. mm in. mm in. SIZE (DN) SIZE 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 4 2 4 2 4 2 ⁄ ⁄ 2 4 06108 8 150 8 150 6 8 150 6 20 150 6 15 14 6 20 229 15 9 8 7 8 40 150 32 150 6 6 20 15 ( ( 1 1 ⁄ 4 ⁄ 4 ", 1 1 1 ") ⁄ ⁄ ⁄ 2 2 2 BCD AB 3 ⁄ 8 9 9 191 9 9 191 191 ") 1 5 5 5 5 1 1 5 5 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 4 8 8 8 8 4 4 8 8 ⁄ ⁄ 4 4 DIMENSIONS (APPROX.) DIMENSIONS • Temperature Maximum Range: • 300psi Pressure: Working Maximum • 276H300– connection; 300psi 20.7bar) (00 – – connection; 0 – 200psi (0 – 13.8 bar) 13.8 – (0 200psi – 0 connection; IWTG – IWTG Specifications Temperature120°F – 0°F Range: • Pressure:300psi Working Maximum • and inlet female threaded NPT • Specifications ( 1 ⁄ (C) (B) (A) PressureRange: Reduced 66°C) – (0.5°C 150°F – 33°F bar) (20.7 (17.8°C – 49°C) – (17.8°C bar) (20.7 connections outlet 2 3 7 6 235 6 219 6 219 6 219 11 219 11 362 7 362 7 235 6 235 6 219 219 " – 2") – " 0 – 25psi (0 – 172 kPa); 172 – (0 25psi – 0 0 – 60psi (0 – 413 kPa); 413 – (0 60psi – 0 0 – 125psi (0 – 861 kPa) 861 – (0 125psi – 0 B 3 ⁄ 4 " (20mm) hose thread hose (20mm) " 3 1 7 7 7 7 1 1 7 7 ( 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 4 4 8 8 8 8 4 4 8 8 3 ⁄ ⁄ 2 2 "(20mm) hose thread ⁄ 4 ") 8 02 9 20 50 2 1 184 1 175 9 1 175 9 20 1 175 20 2 50 175 2 50 292 2 292 2 184 1 184 1 175 175 A 3 3 3 3 3 3 3 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 4 4 4 4 4 4 4 4 41 5 5 12 5 12 44 5 12 44 12 18 44 40 18 44 40 70 70 5 5 12 12 44 44 C D WEIGHT request literature ES-P60. literaturerequest information, additional For Whenutilizing a Teflon modelsfor dead end and liquid service. 152A-T,152SS-T or 252A-T – pressuresup to 300psi (20.7 bar) 152Aexcept furnished in bronze body for ES-215. literaturerequest information, additional For 252A– bar)at 420°F (216°C) mumsupply pressure up to 300psi (20.7 • request literature F-Gauges. literaturerequest information, additional For request literature ES-152A, ES-152SS. ES-152A, literaturerequest information, additional For Seecapacity chart on pg. 12 for max. ratings. – 152A Models sizes 152SS– 200psi(13.8 bar) outletconnections. Initial pressures up to (15-50mm),NPT threaded female inlet and and400°F (204°C) at 200psi (13.8 bar). turesare 300°F (149°C) at 300psi (20.7 bar) 252A-T,the maximum operating tempera- ReducedPressure Ranges: Std.psi set at: Suffix C Suffix B Suffix A Suffix 1 ⁄ 2 ", sizes with iron body. Sizes: iron with withstainless steel body and trim, 3 ⁄ 4 ",1"(15, 20, 25mm). For maxi- o 50psi – 0 for 20psi – 0 for 8psi – 0 for 1 ⁄ 2 ", 3 ⁄ 4 "(15,20mm) identical to ® valvedisc in the 1 tightseating ⁄ 2 " to 2" to " 276H300 15 10 4 152A P60 215 19 Pressure Regulators & Automatic Control Valves 1 F127SS (8.6 BAR) (17.2 BAR) FROM 250PSI UP TO 125PSI " – 3" (15 – 80mm), bronze " – 3" (15 – 80mm) feature 2 2 ⁄ ⁄ 1 1 (6.2 BAR) (13.8 BAR) UP TO 90PSI FROM 200PSI –– –– –– –– body with NPT threaded inlet and outlet connections stainless steel discs on – (.3 depending –150psi 5 bar) 10.3 pressure supply and valve the of size • Sizes: • Range: Pressure Reduced Adjustable For additional information, request literature F-127. Specifications • Sizes: 54 60 95 29 32 38 44 114 D C 8 8 4 2 8 4 2 4 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 3 3 1 1 1 1 3 (4.8 BAR) (10.3 BAR) UP TO 70PSI FROM 150PSI A 400410 2 425 2 425 3 4 384387 1 391 1 1 4 8 4 4 8 4 8 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 3 1 3 3 1 1 3 B (3.4 BAR) (6.9 BAR) UP TO 50PSI FROM 100PSI 410416 15425 15 435 15 381454 15 470 1 15 521 16 540 16 16 BCD DIMENSIONS (APPROX.) 8 8 4 8 8 2 2 4 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 3 3 1 7 1 1 1 108 16 133 16 184 17 308 21 114 16 (1.4 BAR) (3.4 BAR) FROM 50PSI UP TO 20PSI A " – 4") 8 ⁄ 4 2 4 4 ⁄ ⁄ ⁄ ⁄ 2 1 ⁄ 1 1 1 1 1 ( 3240 442 665 200 302 786 1120 357 508 1127 1600 511 726 1484 2230 673 1012 1830 2725 1236 830 15152020 80 80 285 285 36 36 129 129 143 143 506 506 65 230 65 230 205 726 205 726 93 329 93 329 270 956 270 956 122 434 122 434 332 1178 1178 332 151 534 534 151 3240 137065 1973 621 5494 895 2436 2492 3508 1105 9766 1591 3493 4430 5030 1584 14006 2282 4599 6353 6623 18442 2086 3004 8365 5668 8163 22730 2570 3703 10310 1520 218 492 99 223 387 875 175 397 555 1255 252 569 1653 731 750 332 2037 900 924 408 3240 4 65 5 7 1520 4 4 102 102 16 16 406 406 15 15 381 381 1 1 25 25 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com SIZE (DN) 4 2 4 2 2 ⁄ ⁄ ⁄ ⁄ ⁄ 2 2 4 4 2 4 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 4 2 2 1 1 1 1 1 ⁄ ⁄ ⁄ in. mm lbs./hr. kgs./hr. lbs./hr. kgs./hr. lbs./hr. kgs./hr. lbs./hr. kgs./hr. lbs./hr. kgs./hr. 2 4 1 1 3 3 1 3 ⁄ ⁄ 1 1 1 in. mm in mm in mm in mm in mm 1 3 INITIAL REDUCED PRESSURE PRESSURE

For reduced greater pressures than those shown for each Initial column Pressure above, refer to the in Detailed the Capacity Table

127127 2 3 80 7906 3586 14054 6375 20154 9142 26538 12037 32709 14837 127127 1 2 50 3518 1596 6253 2836 8967 4067 11807 5356 14553 6601 127 127127 1 1 25 878 398 1560 708 2237 1015 2943 1131 3631 1647 127 127127 2 3 50 80 6 8 152 17 203 18 127 127 1 127 127127 1 2 127 1 25 4 152A 1 F127 3 80 7906 3586 14054 6375 20154 9142 F127 4 100 8301 3765 14756 6693 21161 9598 152A 1 152A 152A 2 50 765 347 1285 583 1840 835 2564 1163 3134 1422 252A 152A 252A 152A 1 25 402 182 715 324 1025 465 1349 612 1663 754 MODEL MODEL SIZE (DN) F127*F127* 3 4 80 100 8 12 203 20

• Diaphragm type regulator • Single seated • Large capacity • Main line process regulation • Heating and dead end service • Institutional, commercial and industrial applications Series Series 127 Process Process Steam Regulators Pressure Watts brochure F-127. brochure Watts Be sure to determine both Initial and Pressure Reduced setting, Pressure or the range required. EXAMPLE: Initial is Pressure 100psi (6.9 bar), Reduced is Pressure 50psi (3.4 bar) and Capacity is required 1500 lbs. (680 kgs.) of steam per hour. By referring to the proper initial reduced column pressure “From 100psi/Up to 50psi (6.9 – 3.4 bar)”, you will find the capaci- for ty the (708 of 1" kgs./hr.) 1560 (25mm) lbs./hr. Model 127 valve corresponds most closely to the capacity required of 1500 lbs./hr. NOTE: Quick Reference Capacity Chart In MAXIMUM Pounds CAPACITIES or Kilograms (lbs. or kgs.) per Hour of Steam *Iron body, flanged connections *Iron body, 20 1 Pressure Regulators & Automatic Control Valves ASME Water Pressure Safety Relief ValvesRelief WaterPressureSafety ASME For additional information, request literature ES-174A-740. literaturerequest information, additional For – 174A Models 150psi – 30 fromincrements kPa) (34.5 5psi in available are settings valve Other • kPa). (206.9 30psi Setting: PressureRelief Standard • Specifications conditions water corrosiveresists construction body bronze 174A Series • only Pressureprotection • boilers supply and heating water hot For • 374A Model 174A Series 374A connection (drain) Note: (lbs./hr.)Capacities Discharge Steam BTU Ratings) Certified Board (National Capacities Relieving and ValvesSettings Relief Safety MODEL 7A25 6 50 2 374A 1 174A 174A 7A12 65 76 3 25 1 1 174A 174A 174A 174A 174A 174A 174A 374A 174A (2.1 – 10.3 bar) 10.3 – (2.1 supplies water of MODEL has iron body with bronze inlet; 550,000 BTU/hr.550,000 inlet; rating bronze with body iron has Valve settings, other than shown above, are available in 5psi increments within the pressure ranges shown. pressureranges the within increments 5psi in available are above, shown than other Valvesettings, Sizes Sizes 3 ⁄ 3 3 4 n mi.m n mi.m n mi.m b.kgs. lbs. mm in. mm in. mm in. mm in. mm in. mm in. 1 1 ⁄ ⁄ " – 2" (20 – 50mm), NPT threaded female inlet x female outlet female x inlet female threaded NPT 50mm), – (20 2" – " 4 4 ⁄ ⁄ 2 4 SIZE (DN) SIZE For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 1 1 3 3 in. 2 1 0 2 4 20 40 24 2 32 20 1 1 ⁄ ⁄ 4 4 ⁄ ⁄ 2 4 SIZE (DN) SIZE ( ( 3 3 1 1 7 3 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 2 2 8 4 2 4 4 ") " – 2") – " ABCDE (mm) 20 40 32 20 50 25 6 10 9 8 165 124 121 43 64 4 64 5 1 1 7 7 1 ⁄ ⁄ ⁄ ⁄ ⁄ 8 4 2 8 8 ⁄ 4 2,020,000 1,682,000 3,815,000 1,005,000 550,000 650,000 30PSI 6 7 6 6 260 4 235 3 216 149 124 22 72 DIMENSIONS (APPROX.) DIMENSIONS 3 1 3 3 3 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 8 4 4 8 8 4 8 6 3 76 3 2 2 184 1 171 162 111 01 60 1 95 5,290,000 4,399,000 1,695,000 9,970,000 2,635,000 100PSI ––– 1 1 1 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ 4 2 8 2 8 21 2 32 2 1 64 1 54 38 29 12,170,000 6,460,000 5,370,000 2,070,000 3,215,000 125PSI 1 3 5 3 7 5 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ A 2 8 8 8 8 8 E 8110.5 6.2 1.1 3.3 2.8 13.8 7.3 1.4 38 6.3 0.7 86 3.1 67 1.5 60 48 41 C D 14,370,000 7,630,000 6,340,000 2,445,000 3,795,000 150PSI WEIGHT B 174A 21 Relief Valves 2 Series 740 (3⁄4" – 2") Iron Body ASME Rated Water Pressure Relief Valves • For hot water heating boiler pressure protection

2 • Expanded outlet drain connections • Size for size, Watts 740 Models offer greater discharge capacity than comparable

Relief ValvesRelief competitive models

Specifications 740 • NPT threaded female inlet x female outlet (drain) connection

• Sizes 3⁄4" x 1" (20 x 25mm), 1" x 11⁄4" (25 x 32mm), 11⁄4" x 11⁄2" (32 x 40mm), 11⁄2" x 2" (40 x 50mm), 2" x 21⁄2" (50 x 65mm) • Standard pressure relief setting is 30psi (206.9 kPa) • Other settings available in 5psi (34.5 kPa) increments from 30 – 75psi (206.9 – 5.2 bar)

For additional information, request literature ES-174A/740.

C B

E A

MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT ABCDE in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.

740 3⁄4 x 1 20 – 25 3 76 57⁄8 149 43⁄8 111 11⁄2 38 17⁄8 48 1.9 .9 740 1 x 11⁄4 25 – 32 31⁄2 89 71⁄4 184 53⁄8 137 17⁄8 48 21⁄8 54 3.1 1.4 740 11⁄4 x 11⁄2 32 – 40 45⁄8 117 83⁄4 222 61⁄2 165 21⁄4 57 25⁄8 67 6.1 2.8 740 11⁄2 x 2 40 – 50 51⁄4 133 91⁄4 235 7 178 21⁄4 57 3 76 7.5 3.4 740 2 x 21⁄2 50 – 65 63⁄4 171 115⁄8 295 83⁄4 222 27⁄8 73 37⁄8 98 16.5 7.5

Safety Relief Valves Settings and Relieving Capacities (National Board Certified Ratings) BTU Steam Discharge Capacities (lbs./hr.) MODEL SIZE (DN) 30PSI 45PSI 50PSI 75PSI in. mm

740 3⁄4 x 1 20 x 25 925,000 1,245,000 1,352,000 1,886,000 740 1 x 13⁄4 25 x 32 1,300,000 1,750,000 1,899,000 2,649,000 740 11⁄4 x 11⁄2 32 x 40 2,105,000 2,830,000 3,075,000 4,285,000 740 11⁄2 x 2 40 x 50 2,900,000 3,903,000 4,237,000 5,909,000 740 2 x 21⁄2 50 x 65 5,250,000 7,067,000 7,672,000 10,700,000 Note: Valve settings, other than shown above, are available in 5psi increments within the pressure ranges shown. Contact your local Watts Agent or call Customer Service (978) 689-6066 for the products with a relief setting other than shown and/or special models of interest.

22 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com • Model 315 – Model315 • factory consult settings, pressurerelief lower with Available • kPa) (103.4 pressure15psi set relief Standard • connection (drain) outlet female threaded x inlet male threaded NPT • Specifications Specifications ValvesRelief Safety For additional information, request literature PG-SSRV.literaturerequest information, additional For available service day Next • 23 page on tables see Capacities; Steam Saturated • • • • Availablebronzeinthreaded with connectionsironcast flangedwithor connections • 41A 41, 31, Fig. Series ASME Rated and Tested Steam Safety Relief ValvesTestedRelief and Safety Rated Steam ASME • For low pressure steam heating equipment heating pressuresteam low For • 415 and 315 Series 1-11x1633 643 1 x 1 415-M1 415-M1 315-M1 MODEL SIZE ASME STEAM ASME SIZE MODEL Fig.41A – bar) (17.2 250psi – 41 Fig. Fig.31 – 1 1 415 1 1 415 Model 415 – Model415 ASMESection I valves for steam boilers with pressures to 250psi (17.2 bar) 1 3 3 For ASME Section VIII steam service handling saturated steam to steam saturated handling service steam VIII Section ASME For ⁄ ⁄ ⁄ 1 4 4 4 ⁄ ForASME Section VIII service on air, gas and vapors to 250psi (17.2 bar) 2 nls/r 5s n mi.m n mls kgs. lbs. mm in. mm in. mm in. lbs./hr.15psi @ in x 1 x x x 805 1860 2 x 3 3 1 3 3 ⁄ ⁄ ⁄ ⁄ 4 4 1 4 4 1 ⁄ 2 " x " " x " ⁄ 4 " x 1 x " For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 3 3 Discharge Capacity Discharge ⁄ ⁄ 4 4 " (20 x 20mm), 1" x 1" (25 x 25mm),x (25 1" x 20mm),1" x (20 " " (20 x 20mm),x (20 " 1 ⁄ 2 20 4 1230 " (32 x 40mm), and 1 40mm),andx (32 " 5 2 2 450 375 13 11 7 3 1 ⁄ ⁄ ⁄ ⁄ ⁄ 16 4 8 16 16 BDE 1 ⁄ 2 3 2 2 138 121 ( 81 1 78 1 71 68 " x 2" (40 x 50mm)x (402" x " 3 ⁄ DIMENSIONS (APPROX.) DIMENSIONS 4 " – 1 – " 11 5 3 3 5 ( ⁄ ⁄ ⁄ ⁄ ⁄ 16 8 16 8 8 1 ⁄ 1 2 ⁄ " – 6") – " 2 02 1 60 1 43 1 33 35 72 67 ") 5 1 5 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ 16 8 8 4 4 420 .91 .41 2.00 .31 .91 54 .24 .70 41 .55 32 32 930 1.36 3.00 59 WEIGHT B Fig. 31, 41, 41A 41, 31, Fig. D E 315 23 Relief Valves 2 Fig. 31 ASME Section I Series Valves Saturated Steam Capacities (lbs/hr @ 90% rating and 3% overpressure) MODEL SET PRESSURE INLET X OUTLET (IN.)

psi kPa 1⁄2 x 3⁄4 3⁄4 x 1 1 x 11⁄4 11⁄4 x11⁄2 11⁄2 x 2 2 x 21⁄2

2 Fig. 31 5* 34 96 171 269 439 686 1126 Fig. 31 10* 69 133 238 372 609 952 1562 Fig. 31 15 103 161 288 451 738 1154 1893 Relief ValvesRelief Fig. 31 20 138 189 337 528 864 1351 2216 Fig. 31 25 172 216 386 605 990 1548 2540 Fig. 31 30 207 244 435 683 1116 1745 2863 Fig. 31 50 345 355 632 991 1621 2543 4157 Fig. 31 75 517 493 878 1377 2251 3519 5774 Fig. 31 100 689 631 1124 1763 2882 4505 7391 Fig. 31 125 861 769 1370 2148 3512 5491 9008 Fig. 31 150 1034 907 1616 2534 4143 6477 10625 Fig. 31 175 1206 1045 1862 2920 4773 7462 12242 Fig. 31 200 1378 1183 2108 3306 5404 8448 13859 Fig. 31 225 1550 1321 2354 3691 6035 9434 15477 Fig. 31 250 1723 1459 2600 4077 6665 10419 17094 * Capacities for 5 and 10psi are not certified by ASME National Board. Fig. 41 ASME Section VIII Series Valves Saturated Steam Capacities (lbs/hr @ 90% rating and 10% overpressure) MODEL SET PRESSURE INLET X OUTLET (IN.)

psi kPa 1⁄2 x 3⁄4 3⁄4 x 1 1 x 11⁄4 11⁄4 x11⁄2 11⁄2 x 2 2 x 21⁄2 Fig. 41 5* 34 104 185 289 473 739 1213 Fig. 41 10* 69 141 250 393 642 1003 1646 Fig. 41 15 103 176 361 491 802 1254 2057 Fig. 41 20 138 203 361 566 925 1445 2371 Fig. 41 25 172 229 409 641 1047 1637 2686 Fig. 41 30 207 256 456 716 1170 1829 3000 Fig. 41 50 345 374 666 1045 1709 2672 4384 Fig. 41 75 517 522 930 1458 2383 3726 6113 Fig. 41 100 689 669 1193 1870 3058 4780 7843 Fig. 41 125 861 817 1456 2283 3732 5835 9572 Fig. 41 150 1034 965 1719 2696 4407 6889 11302 Fig. 41 175 1206 1113 1982 3108 5031 7943 13032 Fig. 41 200 1378 1260 2245 3521 5756 8998 14761 Fig. 41 225 1550 1408 2508 3933 6430 10052 16491 Fig. 41 250 1723 1556 2771 4346 7105 11106 18221 * Capacities for 5 and10psi are not certified by ASME National Board. Fig. 41A ASME Section VIII Air Capacity Ratings (SCFM @ 90% rating and 10% overpressure) MODEL SET PRESSURE INLET X OUTLET (IN.)

psi kPa 1⁄2 x 3⁄4 3⁄4 x 1 1 x 11⁄4 11⁄4 x11⁄2 11⁄2 x 2 2 x 21⁄2 Fig. 41A 5* 34 37 65 102 167 261 428 Fig. 41A 10* 69 50 89 140 228 356 585 Fig. 41A 15 103 63 111 175 285 446 732 Fig. 41A 20 138 72 128 201 329 514 844 Fig. 41A 25 172 82 145 228 373 583 956 Fig. 41A 30 207 91 162 255 416 651 1068 Fig. 41A 50 345 133 237 372 608 951 1550 Fig. 41A 75 517 185 331 519 848 1326 2176 Fig. 41A 100 689 238 424 665 1088 1701 2791 Fig. 41A 125 861 291 518 812 1328 2076 3407 Fig. 41A 150 1034 343 611 959 1568 2452 4022 Fig. 41A 175 1206 396 705 1210 1808 2827 4638 Fig. 41A 200 1378 448 799 1253 2048 3202 5254 Fig. 41A 225 1550 501 892 1400 2288 3578 5869 Fig. 41A 250 1723 553 986 1547 2528 3953 6435 Fig. 41A 275 1895 606 1080 1693 2769 4328 7101 Fig. 41A 300 2067 659 1173 1840 3009 4703 7716 * Capacities for 5 and 10psi are not certified by ASME/National Board. 24 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com Water Storage Heaters. WaterStorage Immersion-Type,Temperature Hot for Shutoff Gas TanksHeaters and WaterStorage Hot Valves for Relief Safety T&P Self-closing • Used in conjunction with Model 3L Model with conjunction in Used • water the to supply gas the off Shuts • tempera- excessive against Protects • 210-5 Series †1 bar). 8.6 6.9, (5.2, 125psi 100, 75, of settings relief pressurewith valves of codes ordering for 689-6066 (978) at Service Customer call or WattsAgent local your Consult bar). (10.3 150psi @ Set shoulderunder outlet orifice overhang to inlet orifice edge. A= LLL100XL. ES-SL100XL/L100XL/LL100XL/ ES-100XL, ES-10L, literaturerequest information, additional For expansionin domestic water closed systems. expansiontanks (DET) to control thermal Note: outlet female and inlet male NPT • BTU/hr 105,000 to 15,000 from heaters water For • lever test Includes • temperature excessive against protection of means proven and Reliable • water hot domestic for protectionpressurerelief and temperature automatic Fully • Temperaturetwo-in-one the providecombined valves Pressurerelief These and • Series1L,1XL, 10Land 100XL ⁄ LLL100XL-Z5 LL100XL L100XL-3 100XL 1XL-8 SL100XL 100XL-8 10L-2 1XL 1L2 2 MODEL " (15mm) valves are not ASME rated. ASME not are valves (15mm) " pressure relief valve, p.20 valve, pressurerelief (98.9°C) 210°F reachestemperature water the that event the in heater heaters water gas in tures systems water hot domestic in pressurebuild-up and capacity discharge temperature requirementsfor listing Z21.22 ANSI latest the on based heaters and tanks supply conditions pressureemergency and temperature excessive both against protection for means proven and expensive least overallwidth of the valve. † † Seepg. 25 for information on domestic † 1 1 3 3 3 3 3 3 3 1 in. mm in. mm in. mm in. mm in. mm oz. gm. Rating BTU/hr. Rating gm. oz. mm in. mm in. mm in. mm in. mm in. ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 4 4 4 4 4 4 4 2 2 2 SIZE (DN) SIZE For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 01 1 1 20 1 20 1 20 1 20 1 20 1 20 1 20 1 15 15 15 B= overallheight of the valve, with lever closed, not including thermostat element length. ( 3 ⁄ 4 3 3 3 3 3 3 3 3 3 3 ") ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 4 4 4 4 4 4 4 4 4 4 ABDT • Gas inlet and outlet connection outlet and inlet Gas • Tankconnection • Specifications • Models L210-5 Models M2, LL210- • 35 4 4 43 4 43 3 43 43 43 33 3 3 43 3 43 3 43 43 43 NPTmale 1 containingup to 3" of insulation edshanks for use with heaters 5M2,LLL210-5 feature extend- ⁄ 2 " (15mm) NPT female NPT (15mm) " T= 1 3 3 1 1 1 1 1 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 4 4 8 4 2 2 2 2 2 2 lengthof thermostat element, measured from inlet orifice edge to end of thermostat. DIMENSIONS (APPROX.) DIMENSIONS 2 02 50 2 2 1 133 2 121 111 108 91 1 1 89 89 89 89 89 89 3 ⁄ 4 "(20mm) B 7 7 7 1 1 1 1 1 1 ⁄ ⁄ ⁄ 8 8 8 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 2 4 8 8 8 8 ( 1 A ⁄ 2 " ," 137 230105,000 105,000 105,000 80,000 340 15,000 397 15,000 340 12 15,000 284 14 12 454 76 2 340 10 203 284 16 76 3 64 12 3 50 10 8 203 32 3 76 41 2 50 29 8 29 3 29 2 22 22 22 T • CSA ratings: natural gas natural ratings: CSA • CSA by certified Design • 3 D request literature ES-210-5. literaturerequest BTU/hr 243,000 gas petroleum BTU/hr.,150,000 liquefied For additional information, additional For ⁄ 4 ") 1 1 1 ⁄ ⁄ ⁄ 8 2 2 Temperature(99°C). 210°F Relief: • Specifications IV Section ASME and Z21.22 ANSI • Standards 125psi (8.6 bar) or 150psi (10.3 bar) (10.3 150psi or bar) (8.6 125psi bar), (6.9 100psi bar), (5.2 75psi Settings: PressureRelief Standard bar). 10.3 – (5.2 150psi – 75 Range: PressureRelief Rated 41 4 105,000 105,000 105,000 340 340 340 12 12 12 54 64 89 † , CSA Listed. CSA , D= 210-5 M2 WEIGHT lengthof shank , from L210-5 M2

LL210-5 M2 Temp.Steam

LLL210-5 M2 CSA 100XL 25 Relief Valves 2 ASME Rated Series 40, 140,

240, 340, 342 (3⁄4" – 2") Automatic Reseating T&P Relief Valves for Hot Water Supply 2 Tanks and Heaters. • The combined two-in-one Temperature and Pressure relief valve provides the least Relief ValvesRelief expensive and most proven means for protection against both excessive temperature and pressure. • Fully automatic temperature and pressure relief protection for hot water supply tanks and heaters based on the latest ANSI Z21.22 Listing Requirements for temperature discharge capacity.

Standards 340 ANSI Z21.22 and ASME Section IV Rated, CSA Listed.

Specifications Features • Temperature relief 210°F (98.9°C). Pressure range 75 – 150psi (5.2 – 10.3 bar). • Bronze body construction Standard settings: 75psi (5.2 bar); 100psi (6.9 bar); 125psi (8.6 bar); and 150psi • Tamper-resistant bonnet screws (10.3 bar). See Dimensions/Wgts. chart on next page for inlet and outlet connection type and sizes. • Series 40 and 140 feature a unique thermostat with a special thermo- Series 40, 140 nominal size 3⁄4" (20mm) bonded coating • To protect gas, electric or oil-fired storage water heaters rated between 180,000 to • 1" (25mm) and above sizes Model M2, 200,000 BTU/Hr. from excessive heat or pressure build up, choose the 3⁄4" (20mm) model 40 or 140. Tested under ANSI Z21.22 with ratings as certified and listed by M4 and M14 are standardly furnished CSA. Series 40, 140 and 240 nominal size 1" (25mm). with stainless steel thermostat tube • For gas or oil-fired storage water heaters rated between 450,000 and 730,000 • Accurate and proven thermostat, BTU/Hr., choose the 1" (25mm) model 40, 140 or 240. Tested under ANSI Z21.22 exclusively designed and manufac- with ratings as certified and listed by CSA. tured by Watts

Series 340, 342 nominal sizes 11⁄2" x 2" (40 x 50mm) • For gas or oil-fired hot water supply boilers rated over 730,000 BTU/Hr. output heating for water and for steam coil storage water heaters, choose the Model 340 or 342. Tested under ANSI Z21.22 with ratings as certified and listed by CSA.

Special Model

Special Model 340X-8 M4Z available in 11⁄2" (40mm) size only. Pressure setting is 175psi (12.1 bar). Temperature relief at 210°F (98.9°C); Certified by CSA only.

For additional information, request literature ES-40, 140, 240, 340, or ES-LL/LLL-40XL.

26 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com * ** Set @ 150psi (10.3 bar). (10.3 150psi @ Set bar). 10.3 and 8.6, 6.9, (5.2, 150psi and 125 100, 75, setting: pressurereliefStandard purposes. selection for valves 10- Fx1 5x2 5 6 5 76 3 3 1 150 x 2M 150 6 1 *342-3 6 25 x 25 *340-3 1 25 x 25 1F x 1F *N241X-5 1F x 1F *N240X-6 *140X-6 10- Fx1 5x2 637 5 76 1 x 2M 3 *342X-8 1 76 *340X-8† 3 25 x 25 1F x 1F *140S-3 10X91 F2 592937 5 76 3 3 229 229 9 9 25 x 25 1 25 x 25 1F x 1F *N241X-8 1F x 1F *N240X-9 X-9 *140 MODEL Standardly furnished with stainless steel thermostat tube. thermostat steel stainless with furnished Standardly L0L1 F2 537 2 76 2 100 3 4 25 x 25 25 x 25 1F x 1M 1F x 1M LL40XL 40XL-4 140X-8 140S-3 LL40XL 40XL-5 40L-3 0- Mx1 5x2 02 50 2 25 x 25 1F x 1M 40L-2 140X-5 LLL40XL 40XL-8 0L71 F2 57182 178 7 25 x 25 1F x 1M 40XL-7 ASME capacities are steam pressure ratings at the indicated set pressure and do not reflect the CSA temperature relieving capacity of the of capacity relievingtemperature CSA the reflect not do pressureand set indicated the at pressureratings steam are capacities ASME 1.781 3 3 3 3 1 1 3 3 3 3 ⁄ ⁄ ⁄ ⁄ 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 4 4 4 4 2 4 4 4 2 4 ⁄ ⁄ in. x in. mm x mm in. mm in. mm in. mm lbs. kgs. BTU/hr. set pressure set pressure set pressure set BTU/hr. kgs. lbs. mm in. mm in. mm in. mm x mm in. in.x M x M x M x M x M 4 4 F x 1 x F x F x F x F F x 1 x F M x M F3 58 0 3 3 200 127 8 5 25 x 32 25 x 32 1F x M 1F x M 3 3 3 3 3 3 3 3 1 1 Inlet x Outlet x Inlet ⁄ ⁄ ⁄ ⁄ F = Female = F SIZE (DN) SIZE ⁄ ⁄ ⁄ ⁄ 4 4 4 4 M = MALE = M 1 1 ⁄ ⁄ 4 4 4 4 2 2 For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 0x2 2 2 127 5 20 x 20 F 0x2 0 2 2 2 200 127 76 8 5 3 20 x 20 20 x 20 F 20 x 20 F F ⁄ ⁄ 0x2 2 2 2 127 2 200 5 3 76 8 20 x 20 20 x 20 3 F 20 x 20 F F 20 x 20 F 2 2 0x4 0 4 4 200 76 8 3 40 x 50 40 x 50 F F 0x4 0 4 4 200 76 8 3 40 x 40 40 x 40 F F 1" LL40XL-Z2 1" THERMOSTAT LENGTH DIMENSIONS (APPROX.) DIMENSIONS THERMOSTATLENGTH 1 (below inlet) (below ⁄ 2 TAB 92 89 1.656 1 1 1 1 3 3 3 3 3 3 3 3 5 5 5 5 5 5 5 5 †340X-M4Z ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 2 2 2 2 8 8 8 8 4 4 4 4 8 8 8 8 8 8 8 8 B T 1 9 9 114 9 114 9 114 114 66 6 86 6 86 6 86 86 6 6 70 6 70 6 70 5 70 5 67 5 67 7 67 5 67 5 67 5 67 5 67 67 A – Temperature– 210°F,of Relief only. CSA Certified 3 3 3 3 5 5 5 5 1 1 1 1 1 1 1 5 5 5 5 5 5 5 5 3 thermostat ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 4 4 4 4 8 8 8 8 2 2 2 2 4 4 4 8 8 8 8 8 8 8 8 ⁄ 4 " LL40XL-Z2 " less Series 40L Series 4 36 ,5,0 ,5,0 6,379,000 6,379,000 3,450,000 6,379,000 3,450,000 6,379,000 3,450,000 1,150,000 1,150,000 3,450,000 3.60 1,150,000 3.00 8 1,150,000 3.60 7 3.00 8 248 7 248 2,134,000 248 2 248 1,155,000 2 168 2 168 2 500,000 168 2 .90 168 2 140 1,437,600 2 2 140 777,600 140 2 165 2 158 2 205,000 158 1 .90 158 1 143 1 2 143 143 1 194 1 143 1 143 1 143 143 1 3 3 3 3 1 1 1 1 1 3 3 3 1 3 3 3 WEIGHT ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 4 4 4 4 4 4 4 4 4 4 4 4 4 2 4 4 4 .07000215004,059,000 4,059,000 2,195,000 4,059,000 2,195,000 4,059,000 2,195,000 730,000 3,085,000 2,195,000 730,000 3,085,000 1.20 1,670,000 730,000 3,085,000 1.20 1,670,000 730,000 1.20 1,670,000 670,000 2,134,000 1.20 670,000 2,134,000 1.00 1,555,000 570,000 2,134,000 1.00 1,555,000 1.00 1,155,000 500,000 500,000 1.00 450,000 1.00 1.00 7 0,0 7,0 1,437,600 1,437,600 777,600 1,437,600 777,600 777,600 1,437,600 205,000 1,437,600 205,000 777,600 .79 1,437,600 180,000 777,600 .79 1,437,600 777,600 .79 205,000 777,600 205,000 .68 205,000 .79 180,000 .79 .79 STEAM RATING STEAM RATING STEAM RATING STEAM RATING STEAM RATING STEAM CSA TEMP. ASME PRESSURE ASME PRESSURE ASME PRESSURE ASME TEMP. CSA 3.656 T/r* BTU/hr.** BTU/hr.** RATINGS 7pi @150psi @75psi 3 ⁄ 4 " LLL40XL-Z2 " 27 Relief Valves 2 Series 3L, 53L (1⁄2", 3⁄4") Poppet Type Pressure Relief Valves for Protection Against Excessive Pressure

2 3L – ASME rated, design certified and listed by CSA. MIL Spec MIL-V-136-10 Type 1. Size: 3⁄4" (20mm), NPT male inlet x NPT female (drain) outlet. ASME construction and tested, listed and certified by the National Board of Boiler and Pressure Vessel Inspectors. Pressure range

Relief ValvesRelief 75 – 150psi (5.2 – 10.3 bar). Standard setting 75psi (5.2 bar). Optional setting 100, 125, 150psi (6.9, 8.6, 10.3 bar). Used in conjunction with Model 210 gas shutoff valve, p.17. 3L 53 – without test lever.

• Sizes: 1⁄2", 3⁄4" (15, 20mm), NPT male inlet x NPT female (drain) outlet • Pressure Range: 75 – 175psi (5.2 – 12.1 bar) • Standard pressure relief setting is 75psi (5.2 bar). Optional settings 100, 125 or 150psi (6.9, 8.6, or 10.3 bar)

53L – same as Model 3L except 1⁄2" (15mm) inlet/outlet. Includes test lever. ANSI Z21.22 “Relief Valves for Hot Water Supply Systems”. Design certified and listed by CSA. Does not comply with ASME requirements. UL Listed. FP53L – for fire protection grid systems; protects against excessive pressure from thermal expansion or line surge. Size: 1⁄2" (15mm). Pressure relief set at 175psi (12.1 bar). UL Listed. For more products to protect against thermal expansion, see pages 25 and 27. For additional information, request literature ES-3L/53L or ES-FP53L.

Series 30 (1⁄2") Pressure Relief Valves • Pressure relief only.

30L – with test lever; not diaphragm activated. Nominal size: 1⁄2" (15mm), NPT male inlet x female (drain) outlet. Standard Pressure Setting: 75psi (5.2 bar). Optional settings 100, 125 and 150psi (6.9, 8.6, 10.3 bar). 30L-Z1 – well system relief valve. Capacity 20 gpm (76 lpm) at 10psi (68.9kPa) over 75psi 30L (516.7 kPa) set pressure N30L – with test lever. Pressure Range: 30 – 60psi (206.7 – 413.4 kPa). Standard settings 30 – 45psi (206.7 – 310 kPa) N30 – without test lever. Pressure Range: 5 – 25psi (34.5 – 172.4 kPa) For additional information, request literature ES-30.

Series 530C (1⁄2" – 3⁄4") Calibrated Pressure Relief Valves • Adjustable pressure relief range 50-175psi (3.4 – 12.1 bar) • Designed for use as protection against excessive pressure build-up in systems containing water, oil and air 530FP – for fire protection systems. Specifications 530C

• Nominal sizes: 1⁄2" or 3⁄4" (15 – 20mm), NPT male inlet x 1⁄2" (15mm) NPT female (drain) outlet • Maximum Working Pressure: 300psi (20.7 bar) • Maximum Working Temperature: 180°F (82°C) For additional information, request literature ES-530C.

Series H32 (1⁄2" – 3⁄4") Hose Connection Pressure Relief Valve

• Has a 3⁄4" hose connection inlet for ease of installation

Specifications H32 • Set at 80psi or 100psi (5.5 bar or 6.9 bar) 28 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com • Pressure Range: 0 – 250psi (0 – 17.2 bar) 17.2 – (0 250psi – 0 PressureRange: • • Nominal size: Nominal • Specifications pressureadjustment facilitates handle “T” • construction body Bronze • 5300A Model Poppet-Type, Compact Bypass Relief ValvePoppet-Type,Relief Bypass Compact For additionalFor information, request literature ES-BP30. bar) 12.1 – (5.2 175psi – 75 BP30C Model kPa) 689.5 – (310.3 100psi – 45 – BP30A Models Size • Specifications excess allows and pressuresetting desired the at operating by equipment Protects • pressurepump positive a by supplied pressureas liquid Controls • BP30 Series Bypass Control Relief ValvesRelief Control Bypass • Bronze body, sensitive rubber diaphragm and special Teflonspecial and body,diaphragm Bronze rubber sensitive • Temperature: Maximum (82°C) 180°F • bar) 12.1 – (.069 175psi – 10 PressureRange: • volume to be bypassed back to the source the to back bypassed be to volume 1 ⁄ 2 " (15mm), NPT male inlet x female outlet female x inlet male NPT (15mm), " adjustable 10 – 50psi (68.9-344.8 kPa), Model BP30B, Model kPa), (68.9-344.8 50psi – 10 adjustable 1 ⁄ 2 " (15mm), NPT male inlet x female outlet female x inlet male NPT (15mm), " For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For ( 1 ⁄ ( 2 1 ") ⁄ 2 ") ® disc 5300A BP30 29 Relief Valves 2 26" Back Section for R-26 30" Back Section for R-30BL 36" Back Section for C-36 For additional information, information, additional For F-Spcmkr. literature request B-26 – Enclosures B-30 – Enclosures B-36 – Enclosures " Tall 2 ⁄ 1 " Tall " Tall 2 2 ⁄ ⁄ 1 1 by Watts by by Watts ® ® For assistance, contact your local authorized agent Watts or visit our website at www.watts.com for 20 – 50 gallon tank size, 24" Cabinet w/o Venting or Louvers or Venting w/o Cabinet 24" size, tank gallon 50 – 20 for for 80 – 100 gallon tank size, 36" Square x 82" Tall Back Section for WPE-24

for up to 52 gallon tank, Size 22" x 16" for up to 40 gallon tank, Size 20" x 20" x 16" for 20 – 50 gallon tank size, 24" Square x 72 for 50 – 80 gallon tank size, 30" Square x 72 for up to 65 gallon tank, Size 22" x 22" x 16" for up to 75 gallon tank, Size 26" x 26" x 16" for up to 52 gallon tank, Size 20" x 20" x 16" for up to 100 gallon tank, Size 30" x 30" x 16"

– –

– – – for 20 – 65 gallon tank size, 26" Wide x 24" Deep x 72 24" Back Section for R-24BL Enclosures

0 –

Series AS — Preassembled Water Water Heater Stands For additional information, request literature F-Spcmkr. literature request information, additional For Specifications/Models • Floating seismic clips for easy bolting to the wall ENS-20 • For use in food processing areas • area a as storage used being from base the prevent to enclosed Fully For additional information, request literature F-Spcmkr. literature request information, additional For Model ENS Enclosed Stand DPS-20 • Round Stand includes built-in drip pan Specifications/Models • Holds up to 52 gallon water heater • PVC drain connector • All clip together design AS-3 F-Spcmkr. literature request information, additional For Model DPS Drip Pan Stand • Stands available for water heaters 40 to 100 gallons in size. AS-20 AS-22 AS-26 Specifications/Models • Raises water heater flame element 18" above the floor per safety code requirements • Reduces risk of fire, explosion, and property damage • Galvanized steel construction Spacemaker Outside Outside Water Heater Enclosures R-24 BL – • Enclosures available for water heaters 20 to 100 gallons in size • Three sided, back sections are also available • No screws, nuts or bolts required Specifications/Models • Allows water heater to be installed outdoors • Galvanized steel enclosures Spacemaker R-26 – WPE-24 (1) – (1) WPE-24 C-36 Com – B-24 WPE – B-24 – R-30 BL – 30 3 Water Heater Installation Products TSE-75P (Plastic wrap) – wrap) (Plastic TSE-75P across-the-frontinstallations – TSE-75 Lagbolts are pre-installed held& with paper keepers toprevent dropping behind thetank • heater water of bottom and top restraining for straps four contains Kit • heater water gallon 75 to up Accommodates • Specifications/Models heater water fit to easily Adjusts • studs wall into directly Bolts — installation easy Quick • heaters water clearance zero For • Clearance Zero for Straps WaterHeater — TSE Series square 36" is platform mounting, for available is wall – FS-36 square 26" is platform mounting, for available is wall – FS-26 restraint E-100 a with complete frame iron angle duty Heavy • heaters water gallon 100 to up Accommodates • Specifications/Models clip floating a of use the with or through straight bolting by floor or roof the to Mounts • floor or roof on anywhere heater water the of placement safe Allows • Standing Free — FS Series polyolefin plastic shrink wrap shrink plastic polyolefin the water heater needs to be elevated, platform is 30" square 30" is platform elevated, be to needs heater water the – WM-30 square 26" is platform elevated, be to needs heater water the where wall the – WM-26 restraint E-100 a includes system mount wall duty Heavy • heaters water gallon 120 to up Accommodates • Specifications/Models applications industrial for Perfect • wall the on anywhere heater water the of placement safe Allows • WallMounted — WM Series Foradditional information, request literature F-Spcmkr. E-100 E-50 restraint the of tensioning front convenient Fast • security added for gussets with tank the Cradles • system strapping Double • heater water gallon 100 to up Accommodates • Specifications/Models installations limited space and cabinets for designed Specially • security optimal for Use • Spacemaker cabinets where hardware needs to locate behind the water heater water the behind locate to hardwareneeds where cabinets where hardware needs to locate behind the water heater water the behind locate to hardwareneeds where Straps for Tight Spacing Tight for Straps Double — E-100 E-50, Series Restraints Heater Water Heavy-duty – – for up to 52 gallon tank. Double strapping system for tight spaces and/or cabinets and/or spaces tight for system strapping Double tank. gallon 52 to up for for up to 120 gallon tank; super heavy duty construction for installations where no where installations for construction duty heavy super tank; gallon 120 to up for no where installations for construction duty heavy super tank; gallon 65 to up for for up to 100 gallon tank. Double strapping system for tight spaces and/or spaces tight for system strapping Double tank. gallon 100 to up for for up to 75 gallon tank; simple double straps for straps double simple tank; gallon 75 to up for for up to 120 gallon tank; super heavy duty construction for installations where installations for construction duty heavy super tank; gallon 120 to up for against installations for construction duty heavy super tank; gallon 65 to up for For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For same as TSE-75 except straps are packed in heavy duty heavy in packed are straps except TSE-75 as same ® by Watts by 31 Water Heater Installation Products 3 for up to 120 gallon tank, same as same tank, gallon 120 to up for For additional information, information, additional For F-Spcmkr. literature request E-120 – E-120 strap enough with comes it except E-75 the 120 a of front the across go or encircle to heater water gal. for up to 75 gallon tank. Provides tank. gallon 75 to up for Models – E-75 heater, water the strapping in flexibility great a non- with heater water the wrap to either across-the strap or spacer back flammable TSE-75 the like front by by Watts ® For assistance, contact your local authorized agent Watts or visit our website at www.watts.com

water heater top and bottom of water heater paper keepers to prevent dropping prevent to keepers paper tank the behind Water Heater Water Straps Series Series E-75, E-120 – Easy Adjust Water Water Heater Restraints

• Quick easy installation — Bolts directly into wall studs • Adjusts easily to fit water heater Spacemaker • Accommodates up to 75 gallon • Kit contains four straps for restraining Specifications • with & held pre-installed are bolts Lag 32 3 Water Heater Installation Products FloodSafe • Series WDS Floodsafe WDS Series • WDS Series • Easily installed on new or existing water heaters. water existing or new on installed Easily • • Provides contacts for monitored alarm detection systems. detection alarm monitored for contacts Provides • Foradditional information, request literature ES-WDS-BB Battery Backup or – WDS-PV – WDS-BB – WDS-SI – WDS-E220 – WDS-SP-R – WDS-SP-L Models Electrical Mechanical TestableandResettable: TheFloodSafe • Specifications • Employs state-of-the-art water detection technology (no terminals to corrode or to or corrode to terminals (no technology detection water state-of-the-art Employs • WDS-PVPower Pented. gas, electric, and oil fired water heaters. water fired oil and electric, gas, heater.for water available the Models to source power and supply water the off shuts automatically and heater water the beneath pan) drain a in (or floor the on water of ence pres- the detects WDS Series The leak. heater water a to due damage catastrophicfrom – Sized for Sized – flooring. surface hard other or tile linoleum, concrete, for WaterDam a with Supplied – required.is piping special No – thecontractor, home orbusiness owner orplumbing inspector toassure proper operation. Maximum Electric Water Heater current rating: 30A rating: current WaterHeater Electric Maximum 50mA draw: Current 60Hz VAC,70mA, 120 Temperature:Maximum (99°C) 210°F bar) (10.3 Pressure:150psi Maximum impair operation). impair VACwall 120 standard a into plugs that supply power low-voltage safe a by Powered – device. connecting each to unique are cables connector interlocking Secure – outlet and is wired using standard thermostat cable (supplied by installer). by (supplied cable thermostat standard using wired is and outlet Spark Ignition/Oil Fired Ignition/Oil Spark Power vented Power Battery backup Battery 3 Electric - 220 VAC220 - Electric thread left-hand - Pilot Standing Standing Pilot - right-hand thread right-hand - Pilot Standing ® ⁄ 4 " or 1" (20 or 25mm) water supply lines. supply water 25mm) or (20 1" or " Water Detector Shutoff WaterDetector For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For ® Water Detector Shutoff protects the home or business owner business or home the protectsShutoff WaterDetector ( 3 ⁄ 4 ", 1") ", ® WaterDetector Shutoff canbeeasily reset by WDS 33 Water Heater Installation Products 3 " 4 ⁄ 3 TWH-UT-H TWH-QC-H hot water shutoff hot water shutoff cold water shutoff valve, hot water shutoff valve, TWH-UT-C " FPT x union end connections, no TWH-QC-C 4 ⁄ check valve 1 Inch – TWH-UT-H valve, dual union connections 1 Inch – TWH-UT-CN valve, dual unions, no check valve FPT x union end connections – TWH-FT-CN TWH-FT-H – TWH-FT-H 3 " FPT x union end connections, no " FPT x union end 4 ⁄ 3 " FPT x union end connections, no check 4 ⁄ 3 " and 1") 4 ⁄ 3 ( hot and cold water valve set, union connections, no check hot and cold water valve set, union connections, no check valve hot and cold water valve set, quick-connect x union end hot and cold water valve set, union connections, no check valve, hot and cold water valve set, For assistance, contact your local authorized agent Watts or visit our website at www.watts.com hot and cold water valve set, quick-connect x union end connections, hot and cold water valve set, union connections with relief valve hot and cold water valve set, quick-connect x union end connections, hot and cold water valve set, union connections, no check valve, no hot and cold water valve set, cold water shutoff valve, quick-connect x union end connections, no hot and cold water valve set, quick-connect x union end connections cold water shutoff valve, dual union connections, no check valve hot and cold water valve set, union connections hot water shutoff valve, union x quick-connect end connections cold water shutoff valve, integral check valve, quick-connect x union hot water shutoff valve, dual union connections cold water shutoff valve, integral check valve, dual union connections " pressure " relief pressure valve 150psi (10.3 bar) 4 ⁄ 3

Tankless Water Heater Water Valves Tankless

Series TWH tankless water heater valves are designed to simplify the installation, maintenance and operation of tankless water heaters. For fast and trouble-free installation use a Series TWH to replace for unions, three tees, seven nipples, two ball valves two boiler drains, and two hose bib covers that are used in a typical tankless water heater installation. Series Series TWH check valve end connections TWH-QC-CN – TWH-QC-H – TWH-QC-C – Single Valves Single Valves (Hot or Cold) – TWH-UT-H – TWH-UT-C – TWH-UT-CN check valve, with relief valve valve – TWH-FT-HCN-RV For additional information, request literature ES-TWH. literature request information, additional For TWH-UTS-HCN-RV 1 Inch – valve, relief valve – TWH-FT-HCN TWH-UT-HC-RV – TWH-UT-HC-RV TWH-QC-HC – TWH-QC-HC-RV – with relief valve – TWH-UT-HCN relief valve – TWH-UT-HCN-RV with relief valve TWH-QC-HCN – no check valve, no relief valve TWH-QC-HCN-RV – connections, no check valve, with relief valve TWH-UTS-HCN 1 Inch – Models Sets Valve (One Hot and Water One Cold valve Water per set) – TWH-UT-HC Specifications • FPT unions for connection to water heater (all models) • FPT unions for connection to water lines (UT models) • Quick-Connect end connections to water lines (QT models) • FPT and sweat connections to water lines (UTS models) • Full-port, ball quarter-turn valve with tee color-coded handle and union • purge Quarter-turn and drain valve with hose connection and tethered brass cap • Optional • Optional integral spring check valve in cold water valves • Hot and cold valves certified to NSF/ANSI 61 • Staggered connection points for ease of installation and access • are suitable Valves for most tankless installations • No additional adapters required • 600 WOG rated 34 3 Water Heater Installation Products N360 M1 N360 M1 N36 (DN) SIZE MODEL N360I MODEL Size: • Temperature: Maximum (121°C) 250°F • Pressure:200psi Working Maximum • Specifications N360 N360 Water Service Vacuum Relief ValvesVacuumWaterRelief Service • Relieves vacuum conditions which could siphon the water from the system and burn out burn and system the from water the siphon could which conditions vacuum Relieves • system the enter to air Allows • occurs vacuum if system closed a vents Automatically • N36 Series Water Service Vacuum Relief ValvesVacuumWaterRelief Service For additional information, request literature ES-N360/N360I. literaturerequest information, additional For • Features • • Standards • • Specifications • • • • N360I N360, Series cfm (425 lpm) (425 cfm size (15mm) and (15mm) size inlet connection. Ventingcapacity: connection. inlet (13.8 bar) (13.8 a water heater or collapse a tank a collapse or heater water a Opens at less than less at Opens kPa) (103.4 pressure15psi max. service, steam for suitable Also certified CSA Systems.” WaterSupply Hot Valvesfor “Relief Z21.22 ANSI Testedunder CSA. rated by and certified Design Maximum Temperature:Maximum (121°C) 250°F bar) (13.8 Pressure:200psi Working Maximum position horizontal or vertical a in mounted be Can tank a collapse or heater water a out burn and system the from water the siphon could which conditions vacuum Relieves system the enter to air Allows occurs vacuum if system closed a vents Automatically 1 3 ⁄ 2 ⁄ 4 " or " 3 1 n mi.m n mo.gr. oz. mm in. mm in. mm in. FNPT x FNPT ⁄ ⁄ 4 2 3 ⁄ 4 3 1 025 04113 113 4 4 50 50 2 2 50 50 2 2 20 15 in. " (15 or 20mm), NPT male NPT 20mm), or (15 " ⁄ ⁄ 4 2 3 ⁄ 4 3 NT2 02 20 x 20 MNPT ⁄ 4 SIZE (DN) SIZE For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For " size (20mm) are 15 are (20mm) size " 1 ⁄ 2 " (15mm) vacuum (15mm) " A DIMENSIONS ( 1 mi.m n mi.m z gm. oz. mm in. mm in. mm in. mm 01 1 20 15 ⁄ 2 ", 3 1 ⁄ B ⁄ 4 2 " ") 3 1 1 ⁄ ⁄ ⁄ 4 2 2 BC AB 01 2 70 2 38 38 • Also suitable for steam service, max. service, steam for suitable Also • TestedCSA. by and certified Design • Standards WEIGHT pressure 15psi (103.4 kPa) (103.4 pressure15psi certified CSA Systems” WaterSupply Hot for ValvesRelief Z21.22 ANSI under rated ( 1 3 5 7 ⁄ ⁄ ⁄ ⁄ 16 16 2 8 ", 81 48 55 58 3 ⁄ 4 " ) " --9 --9 1 ⁄ 2 81 369 13 38 WEIGHT 255 255 N360 A request literature ES-N36. literaturerequest information, additional For than less at Opens • Features N360 B A A 1 ⁄ 2 " (15mm) vacuum (15mm) " N360I N360I B B N36 C 35 Water Heater Installation Products 3 BRV BRVP PEX Barb Barb Barb Barb Barb Barb Barb RELIEF OUTLET Compression S x S x BARB PEX x PEX x Comp 100DT 100DT-72 100DT-A60 PEX PEX PEX PEX PEX Sweat Sweat OUTLET Thread Thread 100DT-A60-12 BRVT For additional information, request literature ES-100DT. BRVP BRVP x T x P PEX x THD x PEX THD x THD x Comp Thread PEX PEX Sweat Sweat Thread PEX INLET Sweat PEX ") 4 ⁄ 3 ( PEX PEX PEX Compression RELIEF OUTLET Compression Compression Compression Compression Compression ", 1" ) 4 ⁄ 3 ball relief valve com po nents po ball relief valve com ( ® PEX PEX Sweat Sweat Sweat Sweat OUTLET Thread Thread Thread For assistance, contact your local authorized agent Watts or visit our website at www.watts.com " (20mm) temperature and relief pressure for use with center top mounted relief valve. Drop length is 60" (1524mm) 60" is length Drop valve. relief mounted top center with use for 4 ⁄ 3 for use with top mounted relief valves. Drop length is 60" (1524mm) same as above except drop length is 72" (1829mm) – – for use with side mounted relief valves. Drop length is 48" (1219mm) –

Maximum Working Temperature: 210°F (99°C) Maximum Working Temperature: Maximum body Working Valve rated Pressure: to 400psi (27.6 bar) valve drain connections Thread PEX PEX Sweat PEX PEX Thread PEX Sweat INLET Drain Lines for T&P Relief Valves Standards Drain line: Fully approved ASME A112.4.1UPC, IAPMO Meets Dept. of Housing and Urban Development requirements 100DT-A60 Models 100DT 100DT-72

• Connects to Models 100DT, 100DT-A 100DT-A Models 100DT, • For use on T&P relief valves with up rating to 105,000 BTU/hr. • Requires no special tools or fittings; hand tightens to relief valve outlet 100DT-A60-12 – – 100DT-A60-12 Specifications Combination Ball and Valve Relief Valve For additional information, request literature ES-BRV. literature request information, additional For Features • Easy Installation – Installs in any position • Low profile design • Full port ball valve with virgin PTFE seats • Blowout proof stem • Stainless steel spring/Viton • • • Series BRV • Secure compression or PEX end fitting drain tube connection • Full line of pex connections • Available in a 75, 80, 100 or 125psi (5.2, 5.5, 6.9, or 8.6 bar) setting pressure • Available with threaded, solder or PEX end connections Available Available Models 36 3 Water Heater Installation Products For information on ASME rated tanks, request literature ES-DETA.literaturerequest tanks, rated ASME on information For Foradditional information, request literature ES-DET-M1. air/water prevent to membrane expansion an uses tank pre-pressurizedsteel Its • all and electric) or oil (gas, heaters direct-firedwater of types all with used be May • source heating water hot the by generated water of volume increased the Absorbs • systems supply water hot domestic open in water of expansion thermal Controls • WaterSystems Hot TanksWaterExpansion Potable Domestic for DET-M1Series † – † : Primer coated Primer Exterior: Bladder: Connection: System Shell: Construction Precharged(FieldkPa)40psi(275Adjustable)to • Connection System Steel Stainless • approved) (FDA Bladder Butyl Fixed • Construction VIII Section ASME • Features additionalFor information, request literature ES-DETA. Temperature: Maximum ) (115°C 240°F • kPa) (275 40psi to Precharged bar) (10.3 Pressure:150psi Working Maximum • Specifications tank expansion precharged type bladder fixed ASME • applications water hot potable industrial and commercial For • system the keeping water hot of volume expanded the accept to Designed • WaterTanksHot Expansion PressurizedPotable ASME for DETADETA– Series 210 5 Connection Size – inches† – Size Connection Air Precharge – psi – Precharge Air TankGal. – Acceptance TankGal. – Volume Weight – lbs. – Weight Max. Temperature°F – Length – inches – Length Max. Pressure – psi – Max.Pressure Diameter – inches – Diameter contact for long system life system long for contact tanks storage water hot of types valve relief T&P the of setting pressurerelief the pressurebelow system keeping pressure below the relief valve setting valve relief the pressurebelow Connection size: Connection Carbon steel Carbon MODEL Butyl (FDA approved) (FDA Butyl (M)=Male, For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For Stainless steel Stainless (F)=Female. E--1DT1-1DT2-1DET-35-M1 DET-20-M1 DET-12-M1 DET-5-M1 3 ⁄ 4 11.5 200 150 8.5 .85 2.1 20 Male 7 3 ⁄ 115.0 4 10.0 200 150 1.8 4.5 20 10 Male 3 ⁄ 4 9221.7 19.2 2516.0 12.5 200 150 3.2 . 14.00 8.5 20 15 Male 1 Female 1 Male 200 150 5.6 20 32 • In-line and free-standing models free-standing and In-line • diaphragm butyl Rugged • Features ANSI/NSF61 to Certified IAPMO, by Listed Standards DET-5-M1 DETA 37 Water Heater Installation Products 3 PLT-5 CWH-S-FF-L water heater and storage tanks Features • Polypropylene liner • Rugged flexible butyl diaphragm • Field adjustable pre-charge • IAPMO and NSF listed • Can be used with most standard Male 20 10 4.5 2.8 150 200 10.5 13.5 4 ⁄ PLT-12 3 " (20mm) brass " (20mm) brass " (20mm) brass male iron " (20mm) brass male iron 4 4 4 4 ⁄ ⁄ ⁄ ⁄ 3 3 3 3 8 Male 20 11 2.1 5.5 150 200 1.26 ") 4 PLT-5 ⁄ 3 8 ⁄ 7 " – 8 ⁄ 5 ( Female. (F) = " (22 x 22mm) compression end fittings 8 " (20 x 20mm), brass female iron pipe (FIP) threaded ends threaded (FIP) pipe iron female brass x " 20mm), (20 ⁄ 4 7 ⁄ 3 Male, " (20mm) brass FIP thread fitting x " x " (16mm) compression end fitting x " (22mm) compression end fitting x " (22mm) compression end fitting x 4 8 ⁄ " " x 8 8 ⁄ 8 ⁄ ⁄ ⁄ 3 4 7 ⁄ 7 5 7 3 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com (M) = Size Size Size Size Size Size Size MODEL

Connection size:

balanced pressure balanced throughout pressure the potable water supply and hot water storage tanks Max. Pressure Max. – psi Max. Temperature °F Temperature Max. Volume – Gal Tank Tank Acceptance – Gal. Tank Air Precharge – psi Connection Size – in.† Diameter – inches Length – inches Weight Weight – lbs. For additional information, request literature F-Flxcon. literature request information, additional For Specifications bar) (10.3 150psi Pressure: Maximum (82°C) 180°F Temperature: Maximum All hoses are NSF61 approved for safer drinking water Flexible, Braided Stainless Steel Heater Water Connectors pipe threaded fitting FIP threaded fitting FIP threaded fitting CWH-S-FM-L – CWHS-AM-L – CWH-S-AF-L – CWH-S-AA-L – CWH-S-FF-L – CWH-S-FF-L CWH-S-AF-L – Models • For connecting water heaters to the water supply • Protects against the destructive effects of system surges pressure • PVC tubing jacketed with braided stainless steel Series CWH-S pipe threaded fitting † – For additional information, request literature ES-PLT. Specifications • Maximum Working 150psi Pressure: (10.3 bar) • Maximum temperature 200°F (93°C)

Potable Potable water expansion tanks • Designed to take in water displaced by thermal expansion and to maintain • Expansion tanks for all types of Direct Fired Hot Heater Water (gas, oil or electric) Series Series PLT 38 3 Water Heater Installation Products • All components are above ground level on a stainless a on level ground above are components All • Attributes System opera- system the both pressureduring system-operating minimizes station WattsBIC-1000 system. irrigation the within leakage and breaks pipe reduce and performance operating maximize systems these principles, design tice prac- best using Constructed component. located easily one in all switch high-pressurelockout and valve preload preventer,backflow valve, regulator valve, master the bine com- Stations Control Irrigation Backflow BIC-1000 Series BackflowIrrigation Control Stations BIC-1000 Series crate". the of "out operation reliableensure to pre-tested is and policy warranty single a has breaks, line water reduce to system the to flow no is there when as well as tion • Combines the Master Valve, Regulator Valve,Valve,and Regulator Master the Combines • • One supplier of components, one components, of supplier One • overall of number the in Reduction • performance pre-installation Optional • reduces design resistant Corrosion • mandated OSHA below Operates • uninter- provide paths flow Redundant • from time installation of Reduction • benefits: following the vide pro- stations Wattspre-engineeredvalve Benefits pendentagencies demands. building critical to ensure for flow performance testedpre-assembled, factory are stations and valve optionally certified by inde- requirements.Wattspre-engineeredapplication project exacting meet to nents Wattscompo- reliableproven, from assembled are that systems control flow water configured custom Pre-EngineeredareValve PVS-1000 Stations Series Pre-engineeredValve Stations PVS-1000 Series steel station steel Backflow Assembly in one easily located component located easily one in Assembly Backflow 125 years 125 over for technology valve in leader responsibility,of source Watts,a program design innovative Watts’through needed components site at criteria design to conformance ensures certification costs maintenance component levels noise maximum costs labor overtime reducing maintained, or tested being is device while flow water rupted costs installations minimizing hours, to days For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For • Integral backflow prevention devices, prevention backflow Integral • gpm >10,000 to design flow Standard • stan- meet ranges control flow Wide • low with performance flow Maximum • Features including: applications control flow of variety wide a for ideal are and specifications your to fit custom are stations Wattspre-engineeredvalve Applications • Other similar buildings similar Other • Facilities Industrial • Restaurants • Dwellings Multi-Family • Schools • Hospitals • needed to suit specific applications specific suit to needed as instrumentation and valves, shutoff headers, strainers, valves, control meter,automatic pressureregulators, requirements flow peak emergency end dard pressuredrops • High-Pressure Lockout Switch. High-PressureLockout • Pilot. Preload • Features Waterisconserved byreducing • oreliminating potential line breaks excessive pressurefor outlet the of system monitoring 24-hour • for design modular bolt and nut type, flanged are components All • For additional information, request literature F-BIC-1000. literaturerequest information, additional For and master valve creates a buffer when turned on. turned when buffer a creates valve master and regulator the on point set higher a with combination in This valve. control pressurelow adjustable, stand-by,preload a field with maintained is system irrigationpressure piping controloftheentire system. thebackflow assembly which provides shut-offa andpressure causedbyhigh pressure. Themaster valve/regulator isinstalled at pressure.operating set above buildup replacement. easy on. turn to allowed is system the when hammer water and shock pressurehigh prevents This addressed. is problem the until ble inopera- system the making circuit; 24V the out lock will switch the The entireThe BIC-1000 • Built-in protection for system upsets system for protection Built-in • capability Expansion • installations 100 over in proven Field • flanges alignment and slip Integral • horizontal and vertical, vault, Standard • pro-fire for connection of point Single • certified USC IAPMO, ASSE, UL/FM, • request literature PG-ValveStations.literaturerequest information, additional For (i.e. seismic shocks) seismic (i.e. history of years and stress pipe relieve and variations site for correct configurations mounting codes) local by approved(where services irrigation and water potable tection, service requiredfor as components listed or When high pressure is detected, pressureis high When PVS-1000 39 Backflow Preventers & Accessories 4 WEIGHT P1 757N BFG WEIGHT 211217 35 45 16 21 P1 757BFG 757N BFG 16 16 ⁄ ⁄ WEIGHT 5 9 241 54267361 117 24 261 67 53 118 157 30 337 71 153 265265 8 8 P 2 16 ⁄ " – 3" (65 – 80mm) available 2 ⁄ ⁄ 16 16 1 ⁄ ⁄ 3 2 1 ⁄ 7 7 1 757NRS 757OSY 757N NRS 757N OSY 234 115267 52 131284 125 59 161 57 145 73 123437 66 161 56 438 144 73 199 133 65 184 480 60 158 218 83 513 72 184 233 83 555 252 233252 9 332 10399 10 14 254 61 28 84 38 223 9 229 56 25 64 29 with quarter-turn with ball quarter-turn valve shutoffs housing and sleeve pipeline adjustment lowest pressure lowest loss pressure valve shutoffs N pattern installations 289258 10 10 2 16 16 ⁄ I ⁄ ⁄ 16 1 ⁄ 3 3 For additional information, request literature ES-757/757N. For Enclosures, WattsBox request literature ES-WB. Features • Extremely compact design • 70% Lighter than traditional designs • 304 (Schedule 40) stainless steel • Groove fittings allow integral • Patented tri-link check provides • Unmatched ease of serviceability • Available with grooved butterfly • May be used for horizontal, vertical or • Replaceable check disc rubber • Sizes 2 3 8 4 ⁄ ⁄ J 3 1 16 16 ⁄ 16 16 ⁄ 16 ⁄ ⁄ ⁄ 1 11 3 15 13 223233 9 252 10 332 11 399 15440 17 381 273 20 124 295 508 134 721 314 327 142 781 336 354 152 891 404 951 431 16 16 16 ⁄ 16 16 ⁄ ⁄ 16 ⁄ ⁄ 421437 11 11 ⁄ 1 5 11 3 13 15 392412 9 500 9 592 13 15 379 8 16 16 757 OSY ⁄ ⁄ 4 16 16 9 3 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ 1 7 5 11 15 393 8 435470 9 9 589 13 697 15 826 17 H G 2 8 2 2 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 1 3 7 622622 16 17 578 15 857 19 1032 23 2 2 ⁄ ⁄ 578 17 857 23 4 4 8 1032 27 1 1 ⁄ ⁄ ⁄ 3 3 5 4 4 8 ⁄ ⁄ ⁄ 3 3 5 DIMENSIONS (APPROX.) 768768 24 24 759779 22811 22 559 24 14 610 16 10971297 33 40 738768 22 22 559 15 1375 40 1137 33 DIMENSIONS (APPROX.) 4 4 ⁄ ⁄ 8 4 4 1 1 8 16 16 16 ⁄ ⁄ ⁄ D 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 3 1 7 1 3 1 C (open) 11 15 DIMENSIONS (APPROX.) 9798 30 30 89 29 94 30 170 54 208 66 1676 50 1270 32 140 44 8994 29 30 94 31 165 51 DGHI J P 16 2 16 2 16 ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 3 16 8 11 11 ⁄ ⁄ 7 2 16 16 2 13 ⁄ ⁄ ⁄ ⁄ 1 1 11 11 506 6 605 8 238 3 260 3 310 4 102 33 838 24 610 18 A 16 16 4 16 ⁄ ⁄ ⁄ 8 124122 3 3 ⁄ ⁄ 1 3 3 13 15 211227 3 3 311 6 ™ 8 16 4 ⁄ ⁄ ⁄ 16 16 ⁄ 7 1 ⁄ 13 5 15 959 19 416479 9 10 578 12 765 16 406 5 1162 23 : 8 4 8 4 4 8 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 7 3 1 3 3 3 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com 735767 4 4 724741 8 927 8 10 254 5 127 43 Suffix A C DGH I J P A CDGHI J P 16 16 ⁄ ⁄ 805 18 856 22 2 2 16 ⁄ ⁄ 1105 30 1460 45 3 ⁄ 15 1 1 grooved grooved inlet gate connection and grooved outlet gate connection 3 flanged inlet gate connection and grooved outlet gate connection grooved inlet gate connection and flanged outlet gate connection A C (OSY) C (NRS) add 16 16 2 2 ⁄ ⁄ ⁄ ⁄ 1 1 11 11 " – 8" UL/FM grooved gear operated butterfly valves with tamper switch 2 ⁄ " – 3" ball quarter-turn valves 1 2 ⁄ non-rising stem resilient seated gate valves UL/FM outside stem and yoke resilient seated gate valves 2 1

65 28 65 28 711 8 203 3 2 " – 10") 65 31 787 16 2 ⁄

2 2 2 1 that are objectionable but not toxic from entering the potable water supply ⁄ ⁄ ⁄ 1 1 1 8 200 50 1270 37 2 SIZE (DN) in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. 6 150 36 in. mm2 3 in. 80 mm 28 in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs. SIZE (DN) 6 150 43 in. mm2 in.3 mm 80 31 in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs. lbs. kgs. lbs. kgs. SIZE (DN) 4 100 33 10 250 57 4 1008 29 200 43 1092 12 3 80 30 757QT 757BFG, 757N BFG Double Check Assemblies Valve 757, 757N Available Available with grooved NRS gate valves - consult factory* Post indicator plate and operating nut available – consult factory* * Consult factory for dimensions Models NRS – OSY – *OSY FxG – *OSY GxF – *OSY GxG – BFG – Specifications • Range: 33°F – 110°F Temperature (0.5°C – 43°C) • Maximum Working 175psi Pressure: (12.1 bar) • Designed to prevent backflow of pollutants • For non-health hazard continuous applications pressure • Provides protection against backsiphonage and backflow backpressure Series Series 757, 757N (2 SilverEagle QT – 40 4 Backflow Preventers & Accessories 774 * Consult factory for dimensions for factory Consult * factory* consult – available nut operating and plate indicator Post factory* consult - valves gate NRS grooved with Available – S – GxG *OSY – GxF *OSY – FxG *OSY – OSY – NRS – LF Suffix: add Models bar) (12.1 Pressure:175psi Working Maximum • 43°C) – (0.5°C Temperature110°F – 33°F Range: • Specifications Double Check ValveAssemblies Check Double • Provides protection against backsiphonage and backpressurebackflow and backsiphonage against protection Provides • pressureapplications continuous hazard non-health For • the entering from water polluted of flow reverse the prevent to Designed • 774 Series 2 23057 300 12 02055 250 10 n mi.m n mi.m n mi.m n mi.m.i.m n ml.ks b kgs. lb. kgs. lb. mm in. mm in. mm. in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. 0 52 200 8 03 6 18 965 48 150 38 6 80 3 0 011 22 1016 40 100 4 1 SIZE (DN) SIZE ⁄ potable water system water potable 2 cast iron strainer iron cast without shutoff valves shutoff without 53 6 16 965 38 65 N UL/FM outside stem and yoke resilient seated gate valves gate seated resilient yoke and stem outside UL/FM non-rising stem resilient seated gate valves gate seated resilient stem non-rising G 1 1 1 1 grooved inlet gate connection and flanged outlet gate connection gate outlet flanged and connection gate inlet grooved connection gate outlet grooved and connection gate inlet flanged ⁄ ⁄ ⁄ ⁄ grooved inlet gate connection and grooved outlet gate connection gate outlet grooved and connection gate inlet grooved 2 2 2 2 A 4153 1461 45 1410 37 1334 30 1232 M For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 1 3 3 1 3 7 3 C (OSY) C (NRS) C (OSY) C ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 8 4 4 8 4 8 8 (2 3926 1349 23 1162 6 6465 406 19 16 959 12 765 10 578 9 479 416 1 ⁄ 2 " – 12") – " 13 15 3 3 3 1 ⁄ ⁄ 8 ⁄ ⁄ ⁄ ⁄ 16 4 16 16 4 A L DIMENSIONS (APPROX.) DIMENSIONS 0 0 53129 381 15 200 9 8 679 605 6 506 4 310 3 260 3 238 1 3 1 1 3 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 2 4 2 2 4 2 DGLPMN 4 53129 381 14 15 29 559 381 27 241 22 381 15 254 15 171 10 140 114 51 5 2591 3 10 330 13 559 12 559 22 22 254 254 10 10 95 89 (Open) D C 1 1 1 1 ⁄ ⁄ ⁄ ⁄ 2 2 2 2 4 15329 533 21 749 19 749 18 749 15 699 P 1 1 1 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ 2 4 2 2 2 9 66018 660 26 495 21 464 18 6 394 12 254 368 10 318 • May be installed in horizontal or horizontal in installed be May • for allows construction Compact • servicing requiredfor tools special No • steel stainless and Thermoplastic • two-bolt with cover access top Single • provides construction steel Stainless • weight the half is body Steel Stainless • for suited ideally is length lay Short • provides Torsionvalve check spring • Features ES-WB. literaturerequestWattsBoxEnclosures, For ES-774. literaturerequest information, additional For vertical flow up position up flow vertical enclosures and vaults smaller trouble-freeoperation for valves check maintenance of ease for coupling style grooved strength maximum and protectioncorrosion term long cost shipping and installation reducing designs competitive of retrofitinstallations loss head low 7 5 1 1 1 STRAINER DIMENSIONS STRAINER ⁄ ⁄ ⁄ ⁄ ⁄ 8 8 2 8 2 5 7 3 0 032 21 70 759 104 15 230 549 13 178 8 470 7 308 257 1 1 3 1 1 1 ⁄ ⁄ 4 2 ⁄ ⁄ ⁄ ⁄ 4 2 2 2 5 03492995 81 209 179 469 77 1033 346 169 552 763 48 254 26 105 470 561 170 58 394 375 31 102 343 225 68 210 70 155 165 w/Gates w/o Gates w/o w/Gates WEIGHT 774OSY 41 Backflow Preventers & Accessories 4 WEIGHT 709 OSY " – 3" 2 ⁄ 1 578 1448 656 1201 545 *N1 (OSY) (NRS) 4 ⁄ 3 FDA epoxy coated quarter-turn epoxy coated cast iron strainer 165 10210 254343 12 195394 20 305 88 22 470 428 508 167 28 194 860 76 368 390 711 2373 167 627 1076 284 2003 908 non-rising stem resilient seated UL/FM outside stem and yoke 2 2 2 ⁄ ⁄ ⁄ 2 4 bronze body. Sizes bronze 2 body. ⁄ ⁄ 1 1 1 without shutoff valves 1 1 cast iron strainer Features • Replaceable bronze seats • Maximum flow at low drop pressure • for easy maintenance simplicity Design • No special tools for required servicing • Captured spring assemblies for safety • installation up flow vertical for Approved Models add Suffix: BB – (65 – 80mm) S – S-FDA – LF – NRS – gate valves OSY – resilient seated gate valves – QT-FDA ball valves STRAINER DIMENSIONS 260308 7470 8 178 13 549 10 15 254 201 91 167 76 4 8 2 8 ⁄ ⁄ ⁄ ⁄ 1 1 1 5 T 191 18 260 26 660 18 4 ⁄ 2 ⁄ R 1 1 286318 9 10 229 21 4 2 ⁄ ⁄ 1 1 D C (open) 1089 11 279 7 2 ⁄ 1 8995 24 24 610 610 4 5 102 127 3 3 76 76 10 10 254 6 168 52 1321 11 114140 34 42 864 6 152 6 152 12 DIMENSIONS (APPROX.) DL RTMN 8 2 4 2 2 ⁄ ⁄ ⁄ ⁄ ⁄ 5 1 3 1 1 L A 506605 6 8 203 64 1626 12 238260 3 310 3 4 16 16 4 16 ⁄ ⁄ ⁄ 8 ⁄ ⁄ 1 3 3 15 13 " – 10") 2 ⁄ 1 (2 959 19 416479 9 10 578 12 765 16 406 5 1162 23 4 4 8 8 4 8 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 7 3 1 3 3 3 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com 1607 30 A C(OSY) C(NRS) M 4 ⁄ 1

N 65 39 991 16

entering the potable water system 2 ⁄ 1 8 200 75 1905 37 6 150 63 3 80 40 1016 18 4 100 52 1321 22 SIZE (DN) in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs. 2 *N1 For additional information, request literature ES-709L. For Enclosures, WattsBox request literature ES-WB. Specifications • Range: 33°F – 110°F Temperature (0.5°C – 43°C) • Maximum Working 175psi Pressure: (12.1 bar)

• Designed to prevent the reverse flow of polluted water from • For non-health hazard continuous applications pressure • Provides protection against backsiphonage and backflow backpressure Series Series 709 Double Check Assemblies Valve 10 250 90 2286 45 709 *Dimensions needed for screen removal. screen for needed *Dimensions 42 4 Backflow Preventers & Accessories Double Check ValveAssemblies Check Double • Maximum Working Pressure: 175psi (12.1 bar) (12.1 Pressure:175psi Working Maximum • TemperatureRange: • Specifications backpressurebackflow and backsiphonage against protection Provides • pressureapplications continuous hazard non-health For • from water polluted of flow reverse the prevent to Designed • 007 Series *Dimensionsrequired for screen removal. 007QT N 1 1 3 1 n mi.m n mi.m n mi.m n mi.m n mi.m n mls kgs. lbs. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. SIZE (DN) SIZE 0Q-D 2 007QT-FDA 0Q-D 034 80 3 007QT-FDA 019 50 2 513 25 1 1 1 ⁄ ⁄ 33°F – 110°F (0.5°C – 43°C) continuous, 140°F (60°C) intermittent (60°C) 140°F continuous, 43°C) – (0.5°C 110°F – 33°F entering the potable water system water potable the entering 4 2 MODEL NO. SIZE (DN) SIZE NO. MODEL ⁄ ⁄ 0-R 2 007-NRS 0-R 034 80 3 007-NRS 0-S 034 80 3 2 007-OSY 007-OSY 2 4 016 16 40 4 32 254 11 10 20 15 H M G 1 3 3 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ 2 4 8 4 8 ABCF GHIMN n mi.m n mi.m n mi.m n mi.m b kgs. lb. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. 1 1 1 I ⁄ ⁄ ⁄ 2 2 2 1 2 3 6 127 4 495 3 5 425 102 5 416 4 337 282 For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 533 33 65 33 65 65 1 1 7 1 5 N1 ⁄ ⁄ ⁄ ⁄ ⁄ 2 4 8 8 8 " – 2": 33°F – 180°F (0.5°C – 82°C); 2 82°C); – (0.5°C 180°F – 33°F 2": – " ( 1 5 0 13 102 4 7 3 102 159 124 4 130 2 117 N ⁄ 2 1 1 1 1 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ " – 3") – " E 8 8 8 8 8 8 ACDERMN A 5 7 1 1 ⁄ ⁄ ⁄ ⁄ 16 16 6 6 10 867 18 867 6 867 16 841 9 841 841 2 8 M 99 3 9 89 127 84 6 5 79 62 DIMENSIONS (APPROX.) DIMENSIONS 3 3 3 1 7 3 ⁄ ⁄ ⁄ 8 8 8 ⁄ ⁄ ⁄ 4 8 8 3 3 1 1 ⁄ 3 ⁄ ⁄ ⁄ 16 4 2 2 ⁄ 8 6 4 4 162 4 260 4 479 4 162 4 416 238 4 2 625 4 50 2 76 3 6 127 5 340 5 248 3 241 3 191 157 C (open) C D DIMENSIONS (APPROX.) DIMENSIONS 13 5 5 5 5 5 5 7 1 3 3 F ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 16 16 16 16 ⁄ ⁄ ⁄ ⁄ 16 8 16 8 8 A 5 3 3 156 148 51 2 85 2 87 85 0 18 18 109 18 109 18 109 18 109 18 109 109 1 ⁄ 2 " – 3": – " R 11 7 5 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 8 16 8 1 1 1 1 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 8 8 8 8 8 8 72 2 87 79 1 1 43 2 54 59 6 8 8 460 8 460 8 460 8 460 8 460 460 11 11 11 5 1 ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 16 16 16 B C 3 3 3 3 3 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 4 4 4 4 4 4 85 4 68 68 3 3 43 2 33 52 2 0246 10 6 10 254 6 222 10 254 222 10 254 222 10 222 10 222 222 •2 request literature ES-WB. literaturerequest WattsBoxEnclosures, For ES-SS007. or ES-007 literaturerequest information, additional For • servicing requiredfor tools special No • pressuredrop Low • cocks test Topvalve ball mounted • design Compact • construction Modular • discs seat and seats Replaceable • Topentry • cover one only - maintenance of Ease • Features • 5 7 3 7 3 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 16 8 4 4 1 coated cast iron body iron cast coated body construction body 1 ⁄ ⁄ 2 2 1 " – 1"(1525–mm)–" have teehandles " – 2" (15 – 50mm) cast bronze cast 50mm) – (15 2" – " ⁄ 2 5 2 8712.511.7 25.75 711 28 22 127 103 5 4 151 3 124 113 " – 3" (65 – 80mm) fused epoxy fused 80mm) – (65 3" – " 537 2351 5.4 12 305 12 76 3 2 95 2 81 70 STRAINER DIMENSIONS STRAINER 1 1 1 ⁄ ⁄ ⁄ 8 8 8 TANRDMNIN WEIGHT DIMENSIONS STRAINER 1 3 1 ⁄ ⁄ ⁄ 6 7 5 70 84 155 84 185 178 185 178 7 178 7 7 267 267 267 2 4 4 92 0 56.8 15 2.3 508 2 5 20 4.5 254 89 254 10 10 70 57 1 1 1 ⁄ ⁄ ⁄ 2 2 2 3 ⁄ 4 *N 6 5 70 72 155 70 158 165 155 165 165 1 7 58 7.2 15.86 578 007M3QT WEIGHT 43 Backflow Preventers & Accessories 4 719QT H F G 70 2.84 1.29 8195 4.66 7.44 2.11 3.37 113 13.96124 16.12151 6.33 25.66 7.31 11.64 4 8 4 16 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 3 3 7 3 7 5 57 2 70 3 89 4 4 2 4 STRAINER DIMENSIONS WEIGHT ⁄ ⁄ ⁄ B 1 3 1 C " – 1" (15 – 25mm) have Tee handles Tee have " – – 25mm) (15 1" 2 ⁄ reduces potential binding due to mineral deposits valve design check valve life valve test cocks 1 20 2 2734 2 41 341 3 7649 4 3 5 102 4 127 5 • No special tools for required servicing • Plastic on plastic check guiding Features • Manufactured from bronze alloy • Separate access, top entry check • Reversible extends seat disc rubber, • Chloramine resistant elastomers • Replaceable seats and seat discs • Compact design • mounted screwdriver slotted ball Top • Low drop pressure • 8 8 16 16 16 ⁄ ⁄ ⁄ 4 ⁄ ⁄ ⁄ 5 5 1 5 3 15 43 5363 1 67 1 79 1 87 1 1 8 8 16 16 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 5 1 1 7 7 11 63 1 8096 2 2 108120 2 136 3 3 F GHMN 8 16 4 4 2 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 3 5 13 E A 147 2 200244 3 3 297297 4 340 4 5 DIMENSIONS (APPROX.) 16 16 8 E(LF) ⁄ ⁄ ⁄ 8 8 4 ⁄ ⁄ ⁄ 3 3 7 5 11 11 75 5 9098 7 9 129 11 129 11 147 13 16 2 16 16 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 15 13 13 94 2 ® 155155 5 179 5 5 108116 3 3 " – 2") 2 ⁄ 1 8 8 4 16 ( 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 1 9 11 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com M 251 3 314376 4 4 480480 6 538 6 7 ABC 8 16 8 8 16 ⁄ ⁄ ⁄ ⁄ 8 ⁄ ⁄ 3 7 7 3 7 13 " inlet/outlet fire hydrant fittings (2" valve) 2 N ⁄ street street elbows with ball quarter-turn valves 1 testcock caps and tethers 15 9 3240 18 18 20 12

2 stainless steel ball valve handles quarter-turn ball quarter-turn valves locking handle ball valves without shutoff valves union connections bronze bronze strainer SIZE 4 2

⁄ ⁄ 4 2 accordance accordance with national plumbing codes and water authority requirements ⁄ ⁄ 1 1 1 25 14 2 50 21 1 in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. 3 1 1 719QT QT – C&T – add Prefix: U – AQT – For additional information, request literature ES-719 For Enclosures, WattsBox request literature ES-WB LH – SH – HC – LF – Models add Suffix: S – Specifications Range: 33°F – 180°F Temperature (0.5°C – 82°C) Maximum Working 175psi Pressure: (12.1 bar) • For non-health hazard continuous applications pressure • Provides protection against backsiphonage and backflow backpressure • Designed to protect drinking water supplies from dangerous cross-connections in Series Series 719 GoldenEagle Double Check Assemblies Valve 44 4 Backflow Preventers & Accessories *OSY GxG – GxG *OSY – GxF *OSY – FxG *OSY – GPM – CFM switch * Consult factory for dimensions for factory Consult * factory* consult – available nut operating and plate indicator Post factory* consult - valves gate NRS grooved with Available – BFG – OSY Suffix: add Models bar) (12.1 Pressure:175psi Working Maximum • 43°C) – (0.5°C Temperature110°F – 33°F Range: • Specifications monitor to necessary is it when systems sprinkler fire on installed Primarily • backpressurebackflow and backsiphonage against protection Provides • pressureapplications continuous hazard non-health For • for toxic not but objectionable are that pollutants of backflow prevent to Designed • 757NDCDA Series757DCDA, SilverEagle Double Check Detector Assemblies Detector Check Double 757DCDA BFG, 757NDCDA BFG 757NDCDA BFG, 757DCDA 757NDCDA 757DCDA, n mi.m n mi.m n mi.m n mi.m n mls g.ls kgs. lbs. kgs. lbs. mm in. mm in. mm in. mm in. mm in. mm in. mm 36 in. 150 28 mm 80 6 in. 3 mm 2 in. 2 0 319 12 1092 43 200 29 8 100 4 02057 250 10 1 1 n mi.m n mi.m n mi.m n mi.m n mls ks b. kgs. lbs. kgs. lbs. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. 0 017 37 1270 50 200 8 5 43 150 31 6 80 3 0 33 100 4 ⁄ ⁄ 2 2 SIZE (DN) SIZE (DN) SIZE unauthorized use of water of use unauthorized supply water potable the entering 52 1 0 3 203 8 711 28 65 2 53 8 16 787 31 65 UL/FM outside stem and yoke resilient seated gate valves gate seated resilient yoke and stem outside UL/FM cubic feet per minute meter minute per feet cubic gallons per minute meter minute per gallons 1 ⁄ 2 " - 8" (65 – 200mm) UL/FM grooved gear operated butterfly valves with tamper with valves butterfly operated gear grooved UL/FM 200mm) – (65 8" - " grooved inlet gate connection and flanged outlet gate connection gate outlet flanged and connection gate inlet grooved connection gate outlet grooved and connection gate inlet flanged grooved inlet gate connection and grooved outlet gate connection gate outlet grooved and connection gate inlet grooved 11 11 3 1 1 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 2 2 2 2 16 16 DHIJP J I CDGH A CG P J I ACDGH A 4045 1460 30 1105 2 02451743 127 5 254 10 8 927 8 741 724 5 22 18 856 805 For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 15 15 1 3 3 1 3 7 3 ⁄ ⁄ 16 16 ™ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 4 4 4 8 4 8 8 (2 C (open) C 128 1162 1 1 6 311 3 3 227 211 D 7 0 3882 1 18 610 24 838 33 102 6 5 959 4 765 3 578 3 479 416 ⁄ 2 " – 10") – " 11 11 11 11 3 1 1 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 2 16 16 2 16 2 16 2 6 51 165 0 617 017 32 1270 50 1676 66 54 208 44 170 140 431 94 30 29 94 89 430 94 29 89 15 11 1 3 1 7 1 3 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 16 16 16 8 8 4 4 DIMENSIONS (APPROX.) DIMENSIONS (APPROX.) DIMENSIONS G H 2740 33 1297 1097 3540 33 1375 1137 1 46016 610 14 24 559 22 811 22 779 759 3 25915 559 22 22 768 738 5 3 3 5 3 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 8 4 4 8 4 4 0223 1032 27 1032 757DCDA OSY 757DCDA 5 19 857 15 578 23 857 17 578 J I 11 15 5 7 7 3 1 1 1 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 16 16 16 4 16 2 2 8 2 9 15 13 592 9 500 9 412 8 392 379 17 15 826 13 697 9 589 9 470 8 435 393 P 15 13 15 13 3 3 11 11 1 5 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 ⁄ ⁄ ⁄ 16 16 16 16 • Replaceable check disc rubber disc check Replaceable • or vertical horizontal, for used be May • butterfly grooved with Available • serviceability of ease Unmatched • provides check tri-link Patented • integral allow fittings Groove • steel stainless 40) (Schedule 304 • designs traditional than Lighter 70% • design compact Extremely • Features ES-WB. literaturerequestWattsBoxEnclosures, For ES-757DCDA/757NDCDA. literature literaturerequest information, additional For ⁄ ⁄ 16 16 16 16 16 N pattern installations pattern N shutoffs valve pressureloss lowest adjustment pipeline sleeve and housing 5 4367 49 44 98 35 34 78 75 32 356 18 70 14 14 399 330 332 13 13 252 233 223 4 460753195438 965 361 159 795 350 610 140 309 24 483 21 440 19 399 15 332 14 252 13 233 223 3 3 3 3 1 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 16 16 2 2 2 6 7 2 5 159 78 351 171 37 125 59 275 81 462 131 31 368 68 343 258 569 90 224 198 78 494 79 538 172 67 72 147 175 63 386 159 368 139 335 757NDCDA OSY 757NDCDA 5DD F 5NCABFG 757NDCDA BFG 757DCDA 757DCDA BFG 757DCDA 5DD 757NDCDA 757DCDA WEIGHT WEIGHT 45 Backflow Preventers & Accessories 4 w/o Gates WEIGHTS " bronze meter 4 774DCDA OSY ⁄ 3 " x 8 w/Gates ⁄ 5 464495 572 774 259 351 180 190 82 86 318 155368394 70 240 390 109 68 177 73 31 120 33 54 4 2 2 2 2 ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 1 1 (gpm or cfm) unauthorized water use vertical flow up position low head loss installations retrofit of competitive designs reducing installation and shipping cost long term corrosion protection and maximum strength two-bolt grooved style coupling for ease of maintenance check valves for operation trouble-free smaller vaults and enclosures • Detects underground leaks and • May be installed in horizontal or For additional information, request literature ES-774DCDA. For Enclosures, WattsBox request literature ES-WB. Features • spring check valve Torsion provides • Short lay length is ideally suited for • Stainless steel body is half the weight • Stainless steel construction provides • Single top access cover with • Thermoplastic and stainless steel • No special tools for required servicing • Compact construction allows for • Furnished with 749749 18 749 19 21 533 1044 474 220 100 699 15 2 2 2 2 ⁄ ⁄ ⁄ ⁄ 1 1 1 1 S grooved grooved inlet gate connec- 8995 10 10 254 254 22 22 559 559 12 13 330 230 104 70 32 flanged inlet gate connection grooved inlet gate connection 171 15241 381 15 29 381 29 114140 10 15 254 381 22 27 559 14 P DGL P gallons per minute meter cubic feet per minute meter UL/FM outside stem and yoke outside UL/FM 2 4 2 2 4 2 DIMENSIONS (APPROX.) ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 3 1 1 3 1 without shutoff valves " – 12") – " and grooved outlet gate connection *OSY GxF – and flanged outlet gate connection *OSY GxG – tion and grooved outlet gate connection Available with grooved NRS gate valves - consult factory* Post indicator plate and operating nut available – consult factory* * Consult factory for dimensions Models add Suffix: CFM – GPM – LF – OSY – gate valves seated resilient *OSY FxG – 2 ⁄ 1 416479 3 578 3 765 4 959 5 6 11621349 8 9 200 15 381 29 (2 C D (Open) C (OSY) 8 8 4 8 4 4 8 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 3 7 3 1 3 3 1 12321334 30 1410 37 1461 45 53 A A 2 2 2 2 L ⁄ ⁄ ⁄ ⁄ For assistance, contact your local authorized agent Watts or visit our website at www.watts.com 1 1 1 1 65 38 965 16

2 water system (0.5°C – 43°C) (12.1 bar) ⁄ 1 G 12 300 57 8 200 52 610 150 48 250 55 in.2 3 mm in. 80 mm 38 in. 965 18 mm in. mm in. mm in. mm in. mm lb. kgs. lb. kgs. SIZE (DN) 4 100 40 1016 22 • Range: 33°F – 110°F Temperature Specifications

• Designed to prevent the reverse flow of polluted water from entering the potable • For non-health hazard continuous applications pressure • Provides protection against backsiphonage and backflow backpressure • Detects system leaks or unauthorized use of the water supply Series 774DCDA 774DCDA Series Double Check Detector Assemblies • Maximum Working 175psi Pressure: 774DCDA 46 4 Backflow Preventers & Accessories Double Check Detector Assemblies Detector Check Double 709DCDA ES-WB. literaturerequestWattsBox Enclosures, For ES-709DCDA. literaturerequest information, additional For – LF – GPM – CFM – OSY Suffix: add Models bar) (12.1 Pressure:175psi Working Maximum • 43°C) – (0.5°C Temperature110°F – 33°F Range: • Specifications supply water the of use unauthorized or leaks system Detects • backpressurebackflow and backsiphonage against protection Provides • pressureapplications continuous hazard non-health For • from water polluted of flow reverse the prevent to Designed • 709DCDA Series 0209 2645 2286 90 250 10 n mi.m n mi.m n mi.m n mls kgs. lbs. mm in. mm in. mm in. mm in. mm in. mm in. mm in. 5 63 150 6 0 510 37 1905 22 18 1321 75 1016 52 200 40 100 8 80 4 3 entering the potable water system. water potable the entering SIZE (DN) SIZE without shutoff valves shutoff without UL/FM outside stem & yoke resilient seated gate valves gate seated resilient yoke & stem outside UL/FM cubic feet per minute meter minute per feet cubic gallons per minute meter minute per gallons 1 ⁄ 4 For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For ACDLRT 6730 1607 3 3 1 3 7 ⁄ ⁄ ⁄ ⁄ ⁄ 4 4 8 4 8 (3" – 10") – (3" 128236 661 5 10 457 18 1626 64 203 8 1162 5 6 5 4 959 3 765 578 479 5 1 1 3 ⁄ ⁄ ⁄ ⁄ 8 2 2 4 DIMENSIONS (APPROX.) DIMENSIONS 6 212 74292912 602 183 1327 403 229 152 9 6 432 381 17 15 1321 864 52 42 34 168 140 114 52 1 43637 9 86 190 76 3 356 14 610 24 95 1 ⁄ 4 A 031 0 7 406 16 1073 L • No special tools required for servicing requiredfor tools special No • • Furnished with Furnished • maintenance easy for simplicity Design • combined economy for Compact • pressuredrop low at flow Maximum • seats bronze Replaceable • coated epoxy fused construction Body • Features meter Model 25, bronze 25, Model meter with performance with iron cast (Open) D C 1 1 ⁄ 2 ⁄ 4 5 ⁄ 8 " x " 6 03949 330 2093 727 260 191 3 ⁄ 4 709DCDA OSY 709DCDA R " (16 x 19mm) x (16 " WEIGHT T 47 Backflow Preventers & Accessories 4 " 4 ⁄ WEIGHT 3 007DCDA " x lbs. kgs. A 8 ⁄ 5 E mm 311313313 97 164 196 44 74 89 " & 3") 4 P 16 16 ⁄ ⁄ ⁄ 2 1 ⁄ 5 5 1 in. (16 x 19mm) meter (2 • Replaceable seats • Maximum flow at low drop pressure • Compact for ease of installation • for easy maintenance simplicity Design • No special tools for required servicing • Bronze body ball valve test cocks • Modular spring loaded checks • Furnished with bronze Features • Fused epoxy coated cast iron unibody mm 279416422 12 12 12 EP 4 8 8 ⁄ ⁄ ⁄ 3 3 5 in. mm 343416479 16 16 15 P DIMENSIONS (APPROX.) C (OSY) C 2 8 8 ⁄ ⁄ ⁄ 3 7 1 in. (open) (2" – 3") mm 892844870 13 16 18 A 8 4 4 ⁄ ⁄ ⁄ 1 1 1 in. For assistance, contact your local authorized agent Watts or visit our website at www.watts.com A 65 33 mm gallons per minute meter cubic feet per minute meter UL/FM outside stem & yoke resilient seated gate valves E

without shutoff valves SIZE (DN)

2 ⁄ tent entering the potable water system 1 3 80 34 2 50 35 in. 2 GPM – LF – For additional information, request literature ES-007DCDA. For Enclosures, WattsBox request literature ES-WB. • Maximum Working 175psi Pressure: (12.1 bar) Models add Suffix: OSY – CFM – • intermit- (60°C) 140°F continuous; – 43°C) (0.5°C – 110°F 33°F Range: Temperature Specifications

• Designed to prevent the reverse flow of polluted water from • For non-health hazard continuous applications pressure • Provides protection against backsiphonage and backflow backpressure • Detects system leaks or unauthorized use of the water supply Series Series 007DCDA Double Check Detector Assemblies 007DCDA 48 4 Backflow Preventers & Accessories • Provides protection against backpressure and backsiphonage backflow backsiphonage backpressureand against protection Provides • pressureapplications continuous hazard health For • Reduced Pressure Zone Assemblies PressureZone Reduced BFG – BFG – OSY – NRS QT – QT Models bar) (12.1 Pressure:175psi Working Maximum • 43°C) – (0.5°C Temperature110°F – 33°F Range: • Specifications system water potable the to protectionprovide to Designed • 957Z 957,Series 957N, SilverEagle 957QT BFG 957 957 dimensions for factory Consult * factory* consult – available nut operating and plate indicator Post factory* consult - valves gate NRS grooved with Available – GxG *OSY – GxF *OSY – FxG *OSY 2 IE(DN) SIZE 02057 250 10 SIZE (DN) SIZE n mi.m n mi.m n mi.m n mi.m n mi.m n mls g b.ks b.ks b.kgs. lbs. kgs. lbs. kgs. lbs. kgs lbs. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. 0 017 37 1270 50 200 8 5 43 150 6 31 80 3 0 33 100 4 1 03 6 24 864 34 80 3 2 5 46 35 150 100 6 4 n mi.m n mi.m n mi.m n mls kgs. lbs. mm in. mm in. mm in. mm in. mm in. mm in. mm in. n mi.m n mi.m n mi.m n mi.m n mi.m n mls kgs. lbs. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. 2 030 80 3 ⁄ 2 1 SIZE (DN) SIZE 1 from contamination in accordance with national plumbing codes plumbing national with accordance in contamination from tamper switch tamper ⁄ ⁄ 2 2 53 8 16 787 31 65 528 65 2 1 2 UL/FM outside stem and yoke resilient seated gate valves gate seated resilient yoke and stem outside UL/FM non-rising stem resilient seated gate valves gate seated resilient stem non-rising ⁄ 2 1 " – 3" (65 – 80mm) quarter-turn ball valves quarter-turnball 80mm) – (65 3" – " 532 65 11 11 ⁄ 2 1 1 ⁄ ⁄ ⁄ ⁄ " - 6" (65 – 150mm) UL/FM grooved gear operated butterfly valves with valves butterfly operated gear grooved UL/FM 150mm) – (65 6" - " 2 2 16 16 A C (OSY) C (NRS) C (OSY) C A add 15 3 grooved inlet gate connection and flanged outlet gate connection gate outlet flanged and connection gate inlet grooved connection gate outlet grooved and connection gate inlet flanged (2 ⁄ 4045 1460 30 1105 grooved inlet gate connection and grooved outlet gate connection gate outlet grooved and connection gate inlet grooved ⁄ 16 16 5 22 856 18 805 G P M J I DGH C A 1 ⁄ Suffix 2 6 4 4 767 735 1 5 1 "– 10") ⁄ ⁄ ⁄ 2 8 2 1 3 7 3 3 3 For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 8 4 8 8 4 4 HIJMP M J I GH A 1223 1162 : 13 6 6468 406 19 959 16 765 12 578 10 479 9 416 1135 1181 7 0 66017 660 26 23 905 826 ⁄ ⁄ 16 8 ™ 2 6 6 122 124 13 15 3 3 1 ⁄ ⁄ 8 ⁄ ⁄ ⁄ 16 16 16 4 1 7 3882 1 18 610 24 838 11 605 33 9 178 506 7 310 6 260 6 238 12 1 1 7 7 C (open) C ⁄ ⁄ ⁄ ⁄ ⁄ 16 2 2 8 8 D 11 11 1 1 3 7 30 174 30 174 ⁄ ⁄ ⁄ ⁄ ⁄ 2 16 2 16 16 DGHIJMP 0 20 16 908 15 622 597 8 617 017 32 1270 50 1676 66 285 54 246 44 216 30 170 29 165 1 1 ⁄ ⁄ 4 4 DIMENSIONS (APPROX.) DIMENSIONS P 1 3 1 1 ⁄ ⁄ ⁄ ⁄ 16 6 24 24 768 768 4 4 8 3540 1375 33 1137 3 25915 559 22 768 22 738 3 5 1 1 ⁄ ⁄ ⁄ ⁄ 16 16 2 2 1 1 ⁄ ⁄ 2 2 5 3 3 DIMENSIONS (APPROX.) DIMENSIONS ⁄ ⁄ ⁄ 8 4 4 0227 1032 2 17 16 622 622 2 13 10 521 10 9 437 414 394 5 23 857 17 578 DIMENSIONS (APPROX.) DIMENSIONS 957OSY 7 3 1 1 1 1 3 9 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 ⁄ ⁄ 2 2 8 2 16 16 15 1 1 1 2 17 826 15 697 13 589 9 470 9 435 8 393 ⁄ ⁄ 2 ⁄ ⁄ 16 2 16 3 11 11 437 421 15 13 3 11 5 1 ⁄ ⁄ ⁄ 16 ⁄ ⁄ 16 16 ⁄ 16 16 4 28 24 23 343 21 279 256 241 16 M 1 3 4 46 440 37 399 32 333 26 252 23 233 21 223 ⁄ ⁄ 4 8 5 22 258 20 289 9 3 1 3 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 8 8 4 2 8 15 13 1 1 ⁄ ⁄ ⁄ ⁄ 182 0 2 2 8 5 9 0 5 431 950 405 893 355 783 328 723 508 20 1178 4 16 8 16 3 53126152815371439154 339 144 317 135 298 125 276 381 17 943 15 832 11 673 10 587 9 548 15 3 ⁄ • Replaceable check disc rubber disc check Replaceable • • Bottom mounted cast stainless steel stainless cast mounted Bottom • horizontal, for used be May • • Available with grooved butterfly grooved with Available • serviceability of ease Unmatched • • Patented torsion spring checks provides checks spring torsion Patented • • Groove fittings allow integral pipeline integral allow fittings Groove • • 304 (Schedule 40) stainless steel stainless 40) (Schedule 304 • designs traditional than Lighter 70% • design compact Extremely • • Sizes 2 Sizes • Features ES-WB. WattsboxFor Enclosures, request literature requestor 58pageliterature ES-AG/EL/TC. Gaps,Vent TestElbowsand Cockssee informationForAir onES-957/957N/957Z. literaturerequest information, additional For ⁄ 16 16 relief valve relief N pattern or Z pattern installations pattern Z or pattern N shutoffs valve lowest pressureloss lowest adjustment housing and sleeve and housing with quarter-turn ball valve shutoffs valve quarter-turnball with 957Z BFG 957Z 6 11 11 564 532 3 3 3 ⁄ G 1 H 16 ⁄ ⁄ 1 5321073 160 382 15 12 12 718 11 634 587 555 ⁄ 16 16 2 3 4 0 8 1 1 3 5 253 558 85 234 187 516 68 219 85 483 161 187 62 200 67 74 441 136 437 147 57 164 67 74 126 148 58 164 61 284 128 134 54 267 118 234 1 ⁄ 2 5 5 " – 3" (65 - 80mm) available 80mm) - (65 3" – " ⁄ ⁄ 16 16 NS OY NS (OSY) (NRS) (OSY) (NRS) 5 5 5N957N 957N 957 957 13 5 1 8 11 11 287 287 ⁄ ⁄ ⁄ 8 8 16 J 2 739 32 87 30 70 67 321 308 300 5 5 WEIGHT ⁄ ⁄ 16 16 1957QT P1 I 8 625 56 21 46 287 287 957N BFG/957Z BFG BFG/957Z 957N WEIGHT 957QT WEIGHT P1 49 Backflow Preventers & Accessories 4 994 OSY F F WEIGHT w/Gates w/o Gates 165 148 67210 235 60343 107 380 27 394 65 172 571470 110 30 259 773 50 179 351 81 189 86 C (open) D 2 2 2 ⁄ ⁄ ⁄ 2 4 ⁄ ⁄ 1 1 1 1 1 257308 7 8 470 178 13 549 226 15 103 62 28 long term corrosion resistance and maximum strength of competitive designs reducing installation and shipping costs easy retrofit clearance when requirements installed against an outside wall valves provide maximum flow at low drop pressure valves for operation trouble-free smaller enclosures a balanced rolling diaphragm to eliminate sliding seals and lower maintenance costs 8 8 2 8 ⁄ ⁄ ⁄ ⁄ 1 1 1 5 Features • Stainless steel construction provides • Stainless steel body is half the weight • Short end to end dimensions makes • Bottom mounted relief valve reduces • spring check Torsion • Thermoplastic & stainless steel check • No special tools for required servicing • Compact construction allows for • Stainless steel relief valve features L A 699 18 749 21 749 26 660 18 2 2 2 ⁄ ⁄ ⁄ 1 1 1 191 10 254 22343 559 15 10 381 29 2 ⁄ 2 ⁄ 1 1 M 292318 11 13 318 279 15 16 381 406 27 15 381 29 267267 7 7 267 178 9 10 254 229 22 10 254 559 22 10 559 254 12 6 DIMENSIONS (APPROX.) D FGL M N 2 2 2 2 2 2 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 1 1 1 G N 765 11 959 12 416 10 479 10 578 10 1162 12 8 4 4 8 8 4 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 3 3 3 7 3 " – 10") 2 ⁄ 1 506 37 605 45 238 16 260 18 310 22 (2 16 16 4 16 ⁄ ⁄ ⁄ 8 ⁄ ⁄ 1 C (NRS) C (OSY) 3 3 15 13 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com 12321334 16 19 1410 406 23 30 A 2 2 2 grooved grooved inlet gate connection and grooved outlet gate connection ⁄ ⁄ ⁄ flanged inlet gate connection and grooved outlet gate connection grooved inlet gate connection and flanged outlet gate connection 1 1 1 non-rising stem resilient seated gate valves UL/FM outside stem & yoke resilient seated gate valve

65 37 940 9 without shutoff valves cast iron strainer.

tent entering the potable water system 2 ⁄ SIZE (DN) 1 4 100 40 1016 12 8 200 52 3 806 38 150 48 965 10 in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs. 10 250 55 2 994 *OSY FxG – *OSY GxF – *OSY GxG – S – ES-994. literature request information, For additional see Cocks, page 58 or request and Elbows Test on Air Vent Gaps, For information ES-AG/EL/TC. literature ES-WB. literature request Enclosures, For WattsBox Available Available with grooved NRS gate valves - consult factory* Post indicator plate and operating nut available – consult factory* * Consult factory for dimensions OSY – NRS – Models add suffix: LF – Specifications • intermit- (60°C) 140°F continuous; – 43°C) (0.5°C – 110°F 33°F Range: Temperature • Maximum Working 175psi Pressure: (12.1 bar)

• Designed to prevent the reverse flow of polluted water from • For health hazard continuous applications pressure • Provides protection against backsiphonage and backflow backpressure Series Series 994 Reduced Pressure Reduced Zone Pressure Assemblies 50 4 Backflow Preventers & Accessories Hydrant Meter Backflow Preventers Backflow Meter Hydrant request literature ES-994BLT.literaturerequest BLT,the on S-994HMB; literaturerequest HMB, the on information additional For •2 thread hydrant male or female (80mm) 3" • Modules Inlet (BLTOptions Series) lpm) 1330 @ kPa (159 350gpm @ 23psi Operation: Continuous • lpm) 1710 @ kPa (255 450gpm @ 37psi Flow: Max. at PressureLoss • lpm) (15 4gpm 95%): Typical(Min Flow Low • lpm) (2510 660gpm Flow: Intermittent Maximum • lpm) (1710 450gpm Flow: Continuous Maximum • 660gpm to 5 1.5%) +/- Typical(100% Range: Operating • Specifications BLT)(Series hookups meter hydrant existing with use for Ideal • HMB) requirements(Series meter C701 AWWA Meets • per loss kPa) (96.5 14psi than less with 500gpm over at capacity-rated flow Large • other or hydrants firefrom water potable of protection retrofitbackflow to Designed • HMB 994 Series BLT994 Series •2 thread only,INPT valve (80mm) gate w/3" (80mm) 3" • •2 thread hose male or w/female gate (80mm) 3" • Modules Outlet specified Customer • •2 • Customer specified Customer • adapter surface Flat • unit) with standard (supplied saddle surface Uneven • Modules Foot specified Customer • ASSE, USC and AWWA standards for Reduced Pressure Principle devices PressurePrinciple Reduced for standardsAWWA and USC ASSE, exists cross-connection of possibility the and only direction one in is flow where connections service water temporary non-permanent, 1 1 1 1 ⁄ ⁄ ⁄ ⁄ 2 2 2 2 994HMB-CFM 994HMB-GPM 994BLT MODEL " (65mm) gate valve only,valve gate w/2 (65mm) " thread hose male or female w/ gate (65mm) " thread NPT male (65mm) " thread hydrant male or female (65mm) " For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 1 ⁄ 2 " (65mm) FNPT (65mm) " (2 lbs. 66 66 62 1 (2 ⁄ 2 " FNPT x 3" MNPT) 3" x FNPT " 1 WEIGHT ⁄ 2 "-7NST x 3") x "-7NST kgs. 30 30 28 • Factory assembled and tested; no tested; and assembled Factory • the in adjustable is leg support Built-in • (HMB flow measures Accurately • makes design lightweight Portable, • from made preventer Backflow • the protectsrestrictor flow In-line • prevents cover valve relief duty Heavy • Features leaks, fouls, and improper assembly improper and fouls, leaks, required;eliminates assembly field installation the matter no field, contamination possible from supply water the protects and series) sites job between transportable easily device resistancecorrosion for steel stainless Series 300 only) (994HMB flow excessive to due damage from components preventer backflow the and element measuring meter location hydrant fire another to transported is 994HMB when damage from valve protects and vandalism 37 1 ⁄ 2 " 20 1 ⁄ 8 " 994HMB 994BLT 9 8 3 1 ⁄ ⁄ 16 4 " " 51 Backflow Preventers & Accessories 4 909QT P 70 1489 6 40 18 4 2 ⁄ ⁄ 3 1 B 8195 2 3 76 15 7 113124 3 151 4 5 102 127 40 40 18 18 D STRAINER DIMENSIONS WEIGHT C 4 8 16 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ 3 7 3 7 15 installation 9898 3 3 133133 4 133 4 5 Features • Modular design • Replaceable bronze seats • Compact for installation ease • Horizontal or vertical (up or down) • No special tools for required servicing 8 8 4 4 4 ⁄ ⁄ ⁄ ⁄ ⁄ 7 7 1 1 1 186186 3 264 3 264 5 264 5 5 8 8 8 ⁄ ⁄ ⁄ 16 16 3 3 3 L A ⁄ ⁄ 5 5 171 7 191191 10 197 10 10 4 2 2 4 E ⁄ ⁄ ⁄ ⁄ 3 1 1 3 165165 7 7 121121 6 165 7 7 178 7 2 2 4 4 2 ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 3 3 1 M DIMENSIONS (APPROX.) 140140 6 6 140 6 N 2 2 2 ⁄ ⁄ ⁄ 1 1 1 ", 2" only (32, 40, 50mm) 2 ⁄ 1 ", 1 " and 1" only (20 and 25mm) 4 295295 5 5 222222 4295 4 102 5 102 4 4 ⁄ 4 ⁄ 1 3 " – 2") 4 8 8 8 ⁄ ⁄ ⁄ ⁄ 4 4 ⁄ ⁄ 5 5 5 3 3 3 ( " and 1" only (20 and 25mm) 4 ⁄ 3 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com 365391 8 470 8 11 495 11 ABCDELPMN 8 8 2 2 ⁄ ⁄ ⁄ ⁄ 3 3 1 1 20 14 3240 18 19 483 11 flanged adapter ends - 1 stainless steel check modules for hot and harsh water conditions

inlet/outlet fire hydrant fitting (2" (50mm) only) polymer coating quarter-turn ball quarter-turn valves locking handle ball valves (open position) without shutoff valves union connections - clean and check strainer - bronze bronze strainer 4 2

⁄ ⁄ 4 SIZE (DN) ⁄ 180°F (82°C) intermittent (82°C) 180°F entering the potable water system backpressure and with both backsiphonage of conditions emergency during mance checks fouled 1 1 2 50 19 1 25 15 in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. 3 1 1 909 U – FAE – FAE For additional information, request literature ES-909S. Cocks Test and Elbows Vent Gaps, Air on information For see page 58 or request literature ES-AG/EL/TC. For Enclosures, WattsBox request literature ES-WB. Prefix C – PC – LH – HC – HW – LF – • Maximum Working 175psi Pressure: (12.1 bar) Models add Suffix: QT – S – • continuous; – 60°C) (0.5°C – 140°F 33°F Range: Temperature Specifications

• Designed to prevent the reverse flow of polluted water from • For health hazard continuous applications pressure perfor- discharge valve relief capacity high • provides design “air-in/water-out” Unique Series Series 909 Reduced Pressure Reduced Zone Pressure Assemblies 52 4 Backflow Preventers & Accessories *UL, FM approved backflow preventers must include UL/FM approved OSY gate valves. gate OSY approved UL/FM include must preventers backflow approved FM *UL, 909 SIZE (DN) SIZE 2 Reduced Pressure Zone Assemblies PressureZone Reduced For WattsBox Enclosures, request literature ES-WB. literaturerequestWattsBox Enclosures, For literatureES-AG/EL/TC. informationForGaps,VentAir on TestElbowsand requestor 58pageCocks see ES-909L. literaturerequest information, additional For bar) (12.1 Pressure:175psi Working Maximum • TemperatureRange: 33°F110°F – (0.5°C43°C) – continuous; • Specifications Unique“air-in/water-out” design provides • high capacity relief valve discharge perfor- pressureapplications continuous hazard health For • from water polluted of flow reverse the prevent to Designed • 909 Series 02093 250 10 Strainer Dimensions Strainer † – Dimension required for screen removal screen for required Dimension – † n mi.m n mi.m n mi.m n mi.m n mi.m n mls g.ls g.ls kgs. lbs. kgs. lbs. kgs. lbs. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. 0 78 200 8 55 100 4 5 65 150 42 6 80 3 1 2 n mi.m n mi.m b.kgs. lbs. mm in. mm in. mm in. mm in. ⁄ 0202 6 87118 711 28 660 26 250 10 5 18 10 150 80 6 3 0 12 100 4 2 1 0 21 200 8 ⁄ 140°F(60°C) intermittent fouled checks manceduring emergency conditions of backsiphonage both with and backpressure system water potable the entering 2 SIZE (DN) SIZE 541 65 N1* 51 5 0246 254 10 254 10 65 1 5 1 1 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ N* 8 2 2 8 4 4 A 3846 2378 39 2000 32 1664 27 1400 21 1073 20 1048 For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For M* 5 1 1 1 ⁄ ⁄ ⁄ ⁄ 8 2 8 8 7 3 3 5 1 5 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 8 8 4 8 4 8 1(OSY) A1 M 1045 1190 37 1000 3 30 832 22 702 18 540 16 524 (2 5 0247183 15.4 34 178 13 8 7 508 305 22 254 20 12 549 10 470 308 257 1 ⁄ 2 " – 10") – " 3 3 1 3 7 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 4 4 8 4 8 8 DIMENSIONS (APPROX.) DIMENSIONS 1223 1162 6 64661244 152 6 406 19 16 959 765 12 578 10 9 479 416 * A1 C 3 ⁄ 4 13 15 3 N1† 3 1 (NRS) ⁄ ⁄ 8 ⁄ ⁄ ⁄ 16 16 16 4 L A DIMENSIONS (APPROX.) DIMENSIONS 1 5 7901 5 5 19 152 6 356 14 9 940 605 9 37 506 152 6 310 5 260 5 238 7 15 578 3 3 1 1 ⁄ ⁄ ⁄ ⁄ 4 4 4 4 DLUR 4 67 248 55 248 26 133 26 133 1 1 1 1 1 ⁄ ⁄ 4 2 ⁄ ⁄ ⁄ 2 2 2 3 1 1 1 1 N ⁄ ⁄ ⁄ ⁄ ⁄ 8 4 2 8 8 101 0 1292 6 14 660 12 26 533 21 279 11 1711 533 11 21 1403 406 16 1130 6 1295171 0 9 406 9 16 406 127 16 5 102 279 4 11 279 663 11 663 7 7 168 112 60 370 27 247 133 470 12.7 60 394 343 28 210 165 U clearance forcheck (Open) D C WEIGHT 1 1 ⁄ ⁄ 2 4 1 12 318 11 286 Q)TNSOYQT OSY NRS T (QT) R 1 1 3 ⁄ ⁄ ⁄ 2 4 4 1 15326 8 2011 761685 3716 1011 2230 980 2160 533 21 318 19 286 14 502 BB – BB Suffix: add Models • Air-in/water-out• design valve relief valve reliefreversible Field • hose sensing strength Industrial • checks lined & coated epoxy Fused • assemblies check spring Captured • servicing requiredfor tools special No • parts internal steel Stainless • seats bronze Replaceable • Features S-FDA – S-FDA – S shutoffs valve ball QT-FDA– – QT valves gate seated resilient – OSY valves gate – NRS – LF 80mm) and (65 emergency conditions emergency during capacity maximum provides 1 1 cast iron strainer iron cast ⁄ ⁄ 1 3 3 16 16 ⁄ ⁄ ⁄ without shutoff valves shutoff without 4 8 8 quarter-turn ball valve quarter-turnball Bronze body,Bronze 2 sizes UL/FM outside stem and yoke and stem outside UL/FM 6 1 2 9 6 6 346 1037 2286 762 160 660 362 86 352 1456 798 612 213 190 1350 326 82.6 470 489 104 718 182 206 230 365 89.8 455 102 365 198 225 88.4 230 195 230 non-rising stem resilient seated resilient stem non-rising FDA epoxy coated strainer coated epoxy FDA R FDA epoxy coated quarter-turncoated epoxy FDA OUTLET T WEIGHT 1 ⁄ 2 " & 3" & " 909OSY 53 Backflow Preventers & Accessories 4 WEIGHT 009QT 52 52 52 63 165165 76 166165 34 75 189165 86 150 68 64 64 57 70 89 15 6 2 2 2 2 ⁄ ⁄ ⁄ ⁄ 1 1 1 1 2 2 4 4 2 ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 3 1 257257 7257 178 7257 178 7 76 198 178 7 34 90 191 178 87 158 71 8 8 8 8 ⁄ ⁄ ⁄ ⁄ STRAINER DIMENSIONS WEIGHT 1 1 1 1 " – 2" (8 – 50mm) 4 ⁄ 6060 2 70 2 81 2 95 2 3 76 12 5 1 113124 3 151 4 5 102 127 16 30 7 13 STRAINER DIMENSIONS 270270 10270 10 254270 10 6 254270 10 6 254 10 270 6 254 10 270 6 10 270 10 " and 3" (65 and 80mm) 8 8 4 4 8 16 2 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ " – 2" (8 – 50mm) ⁄ ⁄ 3 3 3 3 7 1 4 3 7 ⁄ 15 8 8 8 8 8 8 8 8 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ sure sure drop 1 construction for ease of maintenance 2 slotted - accessible installation clearances 5 5 5 5 5 5 5 5 • Large body passages provide low pres- • Compact, space saving design • No special tools for required servicing Features • Single access cover and modular check • Fused epoxy coated cast iron body - • Ball valve test cocks - screwdriver • entry - all Top internals immediately • Captured springs for safe maintenance • Internal relief valve for reduced • Replaceable seats for economical repair • Bronze body construction for durability 10 R 140140 2 140 2 171 2 241 3 289 3 283 4 343 4 5 197 10 197 10 197 10 222 10 222 10 222 10 B 4 4 4 4 4 4 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ C 3 3 3 3 3 3 D —— 8 8 2 ⁄ ⁄ ⁄ 2 2 2 4 2 ⁄ ⁄ ⁄ ⁄ ⁄ D 3 1 1 1 1 1 3 1 C (Open) 460460 –– 7 460 –– 7 460 10 7 460 460 8 460 8 460 8 8 8 8 8 8 8 8 8 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 1 1 1 1 1 323232 5 38 5 64 5 64 6 64 9 11 83 11 13 18 18 U " – 3" 33°F – 110°F 2 ⁄ 1 4 4 4 2 2 2 2 4 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 1 1 1 1 1 L 416 18 416 18 416 18 422 18 422 18 422 18 A A L 8 8 8 8 8 8 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 3 3 3 5 5 5 —— —— E 8686 1 86 1 89 1 1 8989 2 2 114 3 DIMENSIONS (APPROX.) 133 16 133 16 133 16 133 133 16 133 16 133 16 133 8 8 8 2 2 2 2 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 3 3 3 1 1 1 1 4 4 4 4 4 4 4 4 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 1 1 1 1 1 DIMENSIONS (APPROX.) M M 470 5 260 5 416 5 238 5 117117 3 117 3 3 140 3197 76 4 2 8 4 8 ⁄ ⁄ ⁄ 8 ⁄ 7 1 3 3 8 8 8 2 4 ⁄ ⁄ ⁄ ⁄ ⁄ N 5 5 5 1 3 N " – 3") 4 ⁄ 1 870 18 870 10 870 7 178 5 845 16 845845 9 6 152 5 ( " – 2" 33°F – 180°F (0.5°C – 82°C); 2 ACDELRUMN 4 ⁄ 4 4 4 4 4 4 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 273425441 5 5 454543 6 127 6 7 3 150 150 3 3 1 1 1 1 1 1 ————5 ————5 BD MN ABCDL For assistance, contact your local authorized agent Watts or visit our website at www.watts.com 4 4 8 8 8 ⁄ ⁄ ⁄ ⁄ ⁄ 3 3 3 7 3 6565 33 65 33 33 65 2 2 2 2 ⁄ ⁄ ⁄ ⁄ 1 1 1 1 in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. 8 10 254 4 " and 3" 1520 10 10 3240 254 17 17 4 10 10 254 4 2 ⁄ " – 2"

1 4 ⁄ 1

SIZE (DN) entering the potable water system (0.5°C – 43°C) continuous, 140°F (60°C) 4 2 ⁄ ⁄ 4 8 2 4 ⁄ ⁄ ⁄ ⁄ 1 1 1 25 16 2 50 21 in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. 1 3 1 3 1 009QT 2 009OSY 3 80 34 009LF009OSY 2 2 MODEL NO. SIZE (DN) 1 009 2 009 Specifications • Range: Temperature

• Designed to prevent the reverse flow of polluted water from • For health hazard continuous applications pressure • Provides protection against backsiphonage and backflow backpressure Series Series 009 009NRS009QT 3 80 3 34 80 34 • Maximum Working 175psi Pressure: (12.1 bar) 009NRS 2 009LF 3 80 Reduced Pressure Reduced Zone Pressure Assemblies For additional information, request literature ES-009. see Cocks page 58 or request and Elbows Test on Air Vent Gaps, For information ES-AG/EL/TC. literature For Enclosures, WattsBox request literature ES-WB. 54 4 Backflow Preventers & Accessories 919QT, 1 Reduced Pressure Zone Assemblies PressureZone Reduced For WattsBox Enclosures, request literature ES-WB. literaturerequestWattsBox Enclosures, For literatureES-AG/EL/TC. informationForGaps,VentAir on TestElbowsand requestor 58pageCocks see ES-919. literaturerequest information, additional For – U Prefix: add – ZQT – AQT – LF – S – QT Suffix: add Models bar) (12.1 Pressure:175psi Working Maximum • 82°C) – (0.5°C Temperature180°F – 33°F Range: • Specifications backpressurebackflow and backsiphonage against protection Provides • pressureapplications continuous hazard health For • from water polluted of flow reverse the prevent to Designed • 919 Series GoldenEagle n mi.m n mi.m n mi.m n mi.m n mi.m n mls g.ls kgs. lbs. kgs. lbs. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. SIZE (DN) SIZE "5 2 50 2" 1 "2 14 25 1" 1 3 1 3 ⁄ ⁄ ⁄ ⁄ 4 4 2 8 1 1 89 "8 012 9 20 " 9 15 " 10 " ⁄ ⁄ 2 4 entering the potable water system water potable the entering 018 40 " 18 32 " bronze strainer bronze union connections union without shutoff valves shutoff without quarter-turn ball valves quarter-turnball inlet & outlet flow up flow outlet & inlet elbow fitting for 360º rotation 360º for fitting elbow 919QT-S 11 1 1 1 3 1 1 1 ⁄ ⁄ ⁄ ⁄ 2 2 16 2 ⁄ ⁄ ⁄ ⁄ 1 4 8 2 8 ⁄ 4 BCD C AB " – 2" (8 – 50mm) – (8 2" – " 3 12 3 535 11 202 476 11 8 461 368 7 307 4 6 241 6 241 6 241 For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 7 7 7 7 1 7 7 ⁄ ⁄ ⁄ ⁄ 16 ⁄ ⁄ ⁄ M 8 8 8 16 16 16 0 5 307 5 290 5 290 3 188 7 2 175 2 175 2 175 ( 1 ⁄ 4 " – 2") – " ® N 1 1 7 1 7 7 7 5 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 8 8 8 2 8 8 8

4 28 142 25 129 23 129 819 98 15 88 3 12 73 12 73 12 73 13 1 3 1 1 3 3 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 16 4 2 4 8 8 DIMENSIONS (APPROX.) DIMENSIONS 3 13 732 11 637 11 591 9 487 7 393 2 5 324 5 314 5 314 D 11 3 11 11 3 3 3 ⁄ 3 ⁄ ⁄ ⁄ ⁄ 16 16 4 4 4 ⁄ ⁄ ⁄ E (LF) E 8 16 16 A 4 5 340 5 2 102 297 5 4 297 233 3 195 E 4 37 1 3 75 146 3 146 3 146 15 5 1 5 3 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 8 8 8 8 3 H N GHM F 5 3 151 3 143 2 130 22 92 6 1 86 1 84 7 7 1 1 5 7 3 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 16 8 8 8 4 8 C 8 1 48 1 44 1 35 72 87 2 79 2 67 1 62 1 52 B 9 9 9 9 9 1 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 16 16 16 2 2 2 G 437 4 76 3 3 64 64 2 64 2 40 1 40 2 40 2 40 2 40 F • Standardly furnished with NPT body NPT with furnished Standardly • test- in ease for Topcocks test mounted • servicing requiredfor tools special No • design saving space Compact, • • Bottom mounted relief valve provides valve relief mounted Bottom • • Innovative check valve plastic cover plastic valve check Innovative • • EZ twist relief valve cover quarter-turncover valve relief twist EZ • and valve check push-in Replaceable • fully are assemblies poppet valve Check • • All rubber elastomers of chloramine of elastomers rubber All • easily Top internals check entry-all • check the for covers access Separate • Features H 9 STRAINER DIMENSIONS STRAINER 1 1 5 3 3 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 2 8 8 4 8 8 connections clearances reducedinstallation and ing clearances installation reduced the check valve poppet valve check the of guiding freetrouble provides bushing during repair to facilitate disassembly facilitate to repair during load spring the captures joint locking the water way water the fromthreads eliminates seats valve relief guide seat plastic innovative by guided material resistant accessible maintenance of ease for valve relief and valves 05 90 4 64 3 54 3 41 0 2 70 2 60 2 60 15 7 3 7 3 1 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 16 8 4 4 2 2 5 731. 5020.4 45.0 14.5 16.9 32.0 37.3 11.9 12.8 26.3 28.3 151 10.1 22.3 124 113 51. . 386.3 4.5 13.8 10.0 5.4 3.7 11.8 8.3 95 81 7 . . . 2.9 6.3 2.9 6.3 2.9 2.6 6.3 5.8 2.6 5.8 2.6 57 5.8 64 64 1Q 919QT-S 919QT WEIGHT 919QT 55 Backflow Preventers & Accessories 4 P1 WEIGHT WEIGHT 957RPDA BFG I 957RPDA OSYOSY 957NRPDA 957NRPDA OSY J 402410422 81 84 101 37 38 46 335 142368 162 64386 150 178 73 68 175 81538 79 201 497 91 225 572 259 2 16 16 16 ⁄ ⁄ ⁄ ⁄ 1 P1 3 3 3 16 8 8 ⁄ ⁄ ⁄ 1 5 13 548 13 587 14 673 15 832943 19 21 483 312 142 353 160 1178 24 610 797 362 964 437 H G 8 8 2 4 8 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ing and sleeve adjustment lowest pressure lowest loss pressure valve shutoffs. relief relief valve or theft of water from the fire sprinkler system 3 1 1 3 1 9 555587 15 634 16 718 16 19 483 174 79 Features • Extremely compact design • 70% Lighter than traditional designs • 304 (Schedule 40) stainless steel hous- • Groove fittings allow integral pipeline • Patented torsion spring checks provides • Unmatched ease of serviceability • Available with grooved butterfly • Bottom mounted cast stainless steel • Replaceable check disc rubber • Metered bypass to detect leakage 16 8 16 4 ⁄ ⁄ ⁄ ⁄ 440 46 223 21 233 23 252 26 332 32 399 37 1 1 13 15 16 16 16 ⁄ 16 16 ⁄ ⁄ 16 ⁄ ⁄ ⁄ 5 1 11 3 13 15 M 241256 21 279 23 343 24 28 826 17 393 8 435 9 470 9 589 13 697 15 2 2 8 2 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 1 16 2 3 7 16 ⁄ ⁄ 2 ⁄ ⁄ 1 1 1 15 578 17 857 23 1032 27 4 4 8 ⁄ ⁄ ⁄ 394414 9 437 10 521 10 13 3 3 5 DIMENSIONS (APPROX.) DIMENSIONS (APPROX.) 2 2 738768 22 22 559 15 16 16 ⁄ ⁄ ⁄ ⁄ 1 1 5 3 1137 33 1375 40 4 4 8 16 ⁄ ⁄ ⁄ ⁄ 1 3 1 1 P 622 16 908 20 597 15 165 29 170 30 216 44 246 54 285 66 1676 50 1270 32 16 2 16 2 16 ⁄ ⁄ ⁄ ⁄ ⁄ 3 1 1 11 11 2 16 2 ⁄ ⁄ ⁄ 1 1 12 " – 10") – " 2 ⁄ D 1 C (open) 416479 6 6 578765 7959 8 178 9 33 838 24 610 18 ™ 1162 11 (2 8 8 4 8 4 4 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 3 7 3 1 3 3 826 23 905 26 660 17 1181 35 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com GH I JM 2 8 2 ⁄ ⁄ ⁄ 1 5 1 805 18 856 22 1105 30 1460 45 A A CDGHIJMP 16 16 2 2 ⁄ ⁄ ⁄ ⁄ 1 1 11 11 : " – 6" N or Z pattern only with UL/FM grooved gear operated butterfly valves 2 ⁄ 65 32 1 gallons per minute meter cubic feet per minute meter UL/FM outside stem and yoke resilient seated gate valves 2

65 31 787 16 Suffix

accordance accordance with national plumbing codes unauthorized use of water 2 2 SIZE (DN) ⁄ ⁄ 1 1 8 200 50 1270 37 46 100 150 35 46 3 80 34 864 24 6 150 43 3 80 31 4 100 33 SIZE (DN) in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs. 10 250 57 Reduced Pressure Reduced Detector Pressure Assemblies For additional information, request literature ES-957RPDA/957NRPDA/957ZRPDA. see Cocks literature page 58 or request and Elbows Test on Air Vent Gaps, For information ES-AG/EL/TC. ES-WB. literature request Enclosures, For WattsBox BFG – add OSY – • Range: 33°F – 110°F Temperature (0.5°C – 43°C) • Maximum Working 175psi Pressure: (12.1 bar) Models Specifications 957ZRPDA 957ZRPDA • Designed to provide protection to the potable water system from contamination in Series 957RPDA, 957NRPDA, 957NRPDA, Series 957RPDA, SilverEagle with tamper switch CFM – GPM – • For health hazard continuous applications pressure • Provides protection against backsiphonage and backflow backpressure • Primarily installed on fire sprinkler systems when it is necessary to monitor 2 2 957RPDA BFG 957RPDA OSY 56 4 Backflow Preventers & Accessories 994RPDA Reduced Pressure Detector Assemblies PressureDetector Reduced For WattsBoxFor Enclosures, request literature ES-WB. literatureES-AG/EL/TC. informationForGaps,VentAir on TestElbowsand requestor 58pageCocks, see ES-994RPDA literaturerequest information, additional For dimensions for factory Consult * factory* consult – available nut operating and plate indicator Post factory* consult - valves gate NRS grooved with Available – GxG *OSY – GxF *OSY – FxG *OSY – GPM – CFM – OSY – LF Suffix: add Models bar) (12.1 Pressure:175psi Working Maximum • 43°C) – (0.5°C Temperature110°F – 33°F Range: • Specifications supply water of use unauthorized or leaks system Detects • backpressurebackflow and backsiphonage against protection Provides • pressureapplications continuous hazard health For • from water polluted of flow reverse the prevent to Designed • 994RPDA Series 2 n mi.m n mi.m n mi.m n mls g.ls kgs. lbs. kgs. lbs. mm in. mm in. mm in. mm in. mm in. mm in. mm in. 5 48 150 6 0 011 22 1016 40 100 4 03 6 18 965 38 80 3 1 G ⁄ SIZE (DN) SIZE entering the potable water system water potable the entering 2 without shutoff valves shutoff without UL/FM outside stem & yoke resilient seated gate valves gate seated resilient yoke & stem outside UL/FM cubic feet per minute meter minute per feet cubic gallons per minute meter minute per gallons 53 4 16 940 37 65 grooved inlet gate connection and flanged outlet gate connection gate outlet flanged and connection gate inlet grooved connection gate outlet grooved and connection gate inlet flanged grooved inlet gate connection and grooved outlet gate connection gate outlet grooved and connection gate inlet grooved 1 ⁄ 2 For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For A 2230 1232 A L 1 3 7 3 ⁄ ⁄ ⁄ ⁄ C (open) C 8 4 8 8 6 11 10 765 10 578 10 479 416 (2 1 ⁄ 2 " – 6") – " 1 1 1 1 ⁄ ⁄ ⁄ ⁄ 2 2 2 2 DIMENSIONS (APPROX.) DIMENSIONS FGLD 6 2 0242 5 3 0 530 65 27 60 107 235 67 559 148 27 22 559 381 254 22 15 10 254 279 229 10 11 9 178 292 7 267 7 267 267 C (open) C D 1 ⁄ 2 9 0242 5 2 0 228 62 103 226 559 22 254 10 191 F • GPM or CFM meter available meter CFM or GPM • and leaks underground Detects • a features valve relief steel Stainless • for allows construction Compact • servicing requiredfor tools special No • steel stainless and Thermoplastic • provide Torsionvalves check spring • reduces valve relief mounted Bottom • makes dimensions end-to-end Short • weight the half is body steel Stainless • provides construction steel Stainless • Features 1 unauthorized water use water unauthorized costs maintenance lower and seals sliding eliminate to diaphragm rolling balanced enclosures smaller trouble-freeoperation for valves check pressuredrop low at flow maximum wall outside an against installed requirementswhen clearance retrofiteasy costs shipping and installation reducing designs competitive of strength maximum and resistancecorrosion term long ⁄ 2 9 8 7 1 50 110 172 380 699 w/Gates w/o Gates w/o w/Gates 994RPDA OSY 994RPDA WEIGHT 57 Backflow Preventers & Accessories 4 WEIGHT " (16 x 19mm) 909RPDAOSY 4 ⁄ 3 346346 470470 798 213 470 1456 362 2230 660 1012 " x 8 8 2 2 8 ⁄ ⁄ ⁄ ⁄ ⁄ T 5 5 1 1 5 R cast iron performance recordall meter recordall provides maximum capacity during emergency conditions Features • Body construction fused epoxy coated • Replaceable bronze seats • Maximum flow at low drop pressure • Compact for economy combined with • Design simplicity for easy maintenance • Furnished with • Air-in/water-out relief valve design • Air-in/water-out • No special tools for required servicing 664664 14 14 356 356 9 9 229 229 230 230 104 104 11301403 161715 17 18 406 432 13 457 18 18 D C (Open) 8 8 2 4 2 ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 1 1 241368 37470 44 546 55 940 67 15 381 13 2 2 2 ⁄ ⁄ ⁄ 2 ⁄ 1 1 1 1 DIMENSIONS (APPROX.) 248248 18 21 133133 7 7 178 178 26 26 L DGLRT A 4 4 4 4 ⁄ ⁄ ⁄ ⁄ 3 3 1 1 " – 10") 2 ⁄ 1 (2 959 9 416479 5 578 5 765 6 6 152 152 9 14 1162 9 C (OSY) 4 4 8 8 4 8 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 3 3 3 7 3 1 10701070 16 1400 18 1664 22 1988 30 2378 37 45 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com A G 8 8 8 2 2 8 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 1 5 1 gallons per minute meter 65 42 cubic feet per minute meter UL/FM outside stem & yoke resilient seated gate valves

without shutoff valves (4" – 10") (100 – 250mm)

2 entering the potable water system SIZE (DN) ⁄ 1 6 150 65 3 80 42 8 200 78 4 100 55 in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. 10 250 93 2 909RPDA For additional information, request literature ES-909RPDA. see Cocks, page 58 or request and Elbows Test on Air Vent Gaps, For information ES-AG/EL/TC. literature For Enclosures, WattsBox request literature ES-WB. Models add Suffix: OSY – LF – CFM – GPM – • Range: 33°F – 140°F Temperature (0.5°C – 60°C) • Maximum Working 175psi Pressure: (12.1 bar) Specifications

• Designed to prevent the reverse flow of polluted water from • For health hazard continuous applications pressure • Provides protection against backsiphonage and backflow backpressure • Detects system leaks or unauthorized use of water supply Series Series 909RPDA Reduced Pressure Reduced Detector Pressure Assemblies 58 4 Backflow Preventers & Accessories RK-TC • tether rubber and cap dust Plastic • • tether and O-ring cap, Brass SAE Fits • Plastic cap and tether Tethers& (fourCaps required per backflow preventer) • Brass dust cap with O-ring seal and seal O-ring with cap dust Brass • RK-SAE-TC • • operation slot Screwdriver • design valve ball port Full • SAE-TC Available • close and open to slot Screwdriver • design valve ball port Full • TC Lines Equipment Small Valvesfor Isolation Gauges, Valvefor Isolation Preventers, Backflow With Use For TestCocks ES-AG/EL/TC. literaturerequest information, additional For preventers backflow pressurezone reduced of VentElbows body to mounted easily be Can installations. Gaps Air Assemblies PressureZone Reduced for Elbows and Gaps Air 909EL-C * Gaps Air 909EL-H * 909EL-F * Vent Elbows — VentElbows 9E-(etcl 2 994EL-F(vertical) 909AG-C 919AGF 909AG-F 909AG-A 909EL-A 994AGK-P 957AG 919AGC 909AG-K 995AG 2 Guard) (Splash 957AG 909AG-M MODEL rubber tether rubber Fits 1 ⁄ 8 " M x SAE x M " 1 1 ⁄ ⁄ 4 8 " female test cocks test female " " M x SAE test cocks test SAE x M " 1 for use with backflow preventers on horizontal on preventers backflow with use for ⁄ 8 1 ⁄ 8 " M x Use with Watts Air Gaps for vertical installation of reduced pressure zone assemblies. zone pressure reduced of installation vertical for with Gaps Watts Use Air are used with Watts air gaps for vertical installation vertical for gaps Wattsair with used are 1- 1 1- 1 1 ⁄ 1 ⁄ 4 4 " – " 1 " – " ⁄ 4 1 1 " – 2" 009M1, 2" 009M2 009M1,2" 2" – " 1 1 2 3 ⁄ 1" – 1 – 1" 1 ⁄ 4 2 8" – 10" 909M1 10" – 8" ⁄ 3 1 1 1 1 " 009M2,1 " 1 4 2 1 " F or 2 ⁄ ⁄ ⁄ ⁄ ⁄ For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For ⁄ 1 2 "0999 2 009/909, 1" – " 4 ⁄ 2 4 4 2 3 "-1"997 909 10" - 8" 4 1 1 1 SERIES/SIZES " 009," 1 1 1 0/0 3 009/909 -1" " "–6 0 6 909 6" – 4" "–6 9 2 0 2 203 8 127 5 995 6" – 3" " – 3" 009/909 3" – " 009/909 2" – " 4 009/909 3" – " " 009," 1 1 ⁄ "091 3 009M1, 2" – " ⁄ ⁄ ⁄ 1 ⁄ 4 2 2 2 ⁄ 2" 009M2 2" ⁄ 2 1 ⁄ 2 4 "992 919 1" & " 0 9 4 994 10" – " 11 203 8 994 10" – " 957 10" – " 2 0 5 7 957 10" - " ⁄ "- 1" 995 1" "- "994 919 2" – " 4 "- 1"995 "- "- 2"995 "- 1 ⁄ 2 " 009M2, " 3 1 3 ⁄ ⁄ ⁄ 4 4 4 " 009M2/M3, " " 009M2/M3 " " M x 1 ⁄ 4 " – 2" 995 2" – " 1 ⁄ 4 " F 2 (Plastic, Brass) (Plastic, n mi.m n mls kgs. lbs. mm in. mm in. mm in. ––––– –––––– ––––– –––––– ––––2 7 5 3 1 3 3 3 3 3 1 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 8 8 8 2 8 8 8 8 8 4 8 ABC 2 2 141.8 4 51 2 229 9 124 10 8 190 111 11 187 9 162 6 111 (four required per backflow preventer) backflow requiredper (four • Adapter SAE-TC • Adapts to SAE-TC for use for SAE-TC to Adapts • for protection of protection for Cap Brass SAE-TC 23 92 2 60 3 60 4 83 3 60 DIMENSIONS (APPROX.) DIMENSIONS 1 with pressure gauge and/or site tube site and/or pressuregauge with ⁄ 4 " female SAE x SAE female " 7 1 5 3 7 1 5 3 3 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 8 8 8 4 8 8 8 8 ⁄ ⁄ 16 4 4 1 642 1.93 4.26 7.03 76 2.83 15.50 3 102 6.25 1.47 214 4 76 3.25 .68 286 3 51 1.50 244 2 25 171 1 124 8 115 0.68 .68 1.50 1.5 51 2 51 286 2 258 79 79 92 60 1 ⁄ 8 SAE-TC (not shown) (not SAE-TC 1 1 7 –2 –– –– 3 ⁄ ⁄ 2 2 ⁄ ⁄ 16 8 " FPT " Epoxy coated *Epoxy 51 .28 .63 13 .28 .63 13 60 3 .17 .38 –– –– WEIGHT .91 (20 - 25mm) - (20 • for 6" – 10" series 757 and 957 and 757 series 10" – 6" for • • • for 2 for • O-Ring with TC 3 No. • TC SilverEagle • Full port ball valve design valve ball port Full • 3 ⁄ 3 1 4 Splash Guard Splash ⁄ ⁄ 909 " – 1" – " 4 2 " TC for 6" – 10" series 757 and 957 and 757 series 10" – 6" for TC " 2 for TC " 1 ⁄ C 2 A " – 4" series 757 and 957 and 757 series 4" – " 1 ⁄ Plastic Cap and Tetherand Cap Plastic 2 " – 4" series 757 and 957 and 757 series 4" – " Brass Cap and Tetherand Cap Brass B Installation of Installation Vertical(Up) A Preventer Backflow Air Gaps Air Elbow B 59 Backflow Preventers & Accessories 4 9D 912HP N9-CD Patent# 6,397,878B1 and male national pipe thread outlet connections PTFE reinforced/enhanced seats and electroless nickel plated brass ball stream check valve, leakage would be vented to atmosphere thereby provid- ing a visual indication of failure of the check assembly flow down) or horizontally the check assembly from fouling due to dirt and debris Features • Female national pipe thread inlet • Ball valve design includes • stem retaining pressure proof Blow-out • Low profile oval handle • In the event of fouling of the down- • Can be installed vertically (flow up or • Integral stainless steel screen protects " (20mm) HT male 4 ⁄ 3 " (10mm) flare copper " flare (10mm) tube (FCT) inlet and 8 ⁄ " (10mm) NPT female inlet and outlet 3 8 ⁄ 3 ", 1") 4 ⁄ 3 ( " (20mm) NPT female union inlet and outlet connec- ") 4 ⁄ 8 3 ⁄ 3 " (20mm) hose thread female inlet x " (8mm) and 4 ⁄ 4 ⁄ 3 1 " – 4 ⁄ 1 ( For assistance, contact your local authorized agent Watts or visit our website at www.watts.com " (15mm) and 2 ⁄ " (10mm) NPT male inlet connection. Max. 150psi pressure (10.3 bar). 1 8 ⁄ 3 In-line field testable, dual check backflow preventer with atmospheric vent. Has a Dual check backflow preventer with atmospheric vent. For continuous Special backflow preventer for vending machine water supply lines. with Complies same as Model 9D with solder ends.

Dual check backflow preventer with atmospheric vent for continuous the same as N9C except in brass finish.

pressure hose pressure drops which are used for the washdown of equipment and facilities potentially contaminated water from the processing and rendering areas into the potable water supply outlet connection. Max. pressure 150psi (10.3 bar). Max. temperature 180°F (82°C). 9D – pressure. Sizes Dual Check Breakers Vacuum For additional information, request literature ES-9, ES-N9-CD, or ES-9D-M3,M2. pressure applications. pressure Sizes N9C – Models • Used to prevent the flow of contaminated water into the potable water supply • Use where water spillage will not cause damage Series Series 9 outlet. Max. 150psi pressure (10.3 bar). Max. temperature 140°F (60°C). NLF9 – connections. Max. 125psi pressure (8.6 bar). N9 – tions. Max. pressure 175psi (12.1 bar). Min. pressure required 25psi (172.4 kPa). Max. temperature 250°F (121°C). 9DS – 9BD – size: Standard regulations. FDA food additive Non-removable Non-removable design. Size For non-continuous applications. pressure N9-CD – conditions commonly found in the meat processing industry. check with atmospheric vent specifically designed to handle the temperature and pressure Incorporates the use of a bronze ball valve shutoff on the inlet of the assembly and a dual High Pressure High Hose Pressure Drop Backflow Preventer For dimensional and additional information, request literature ES-912HP. Specifications For non-health hazard applications where continuous conditions pressure exist.

• For isolation protection on high plumbing pressure supply lines, such as high • Ideally suited for food processing plants • Provides and backflow backpressure protection to prevent the reverse flow of • Maximum Working 400psi Pressure: (27.6 bar) • 160°F (71°C) Maximum Temperature: Series 912HP 60 4 Backflow Preventers & Accessories PressureVacuum Breakers • Lever handles 1 handles Lever • • With tee handle quarter-turn shutoffs on quarter-turnshutoffs handle tee With • 800M4QT,Series 800M4FR damage. cause can parts internal the of wear normal to due leakage water whereareas or locations concealed in install not Do tion. re-pressuriza-during valve the from spillage resultant and assembly check the of fouling the Note: Sizes • Designedtoprevent backsiphonage of • highest above (305mm) 12" Install • cross-connectionshazard health For • • Standardly furnished with internal polymer coating. polymer internal with furnished Standardly • • Maximum Working Pressure: 150psi (10.3 bar) (10.3 Pressure:150psi Working Maximum • 83°C) – (0.5°C Temperature180°F – 33°F Range: • VacuumBreakersAnti-siphon Resistant, Spill For additional information, request literature ES-008PCQT.literaturerequest information, additional For Sizes • Specifications or installed factory when 1" Install applied. field if rim flood the above 6" Install • supply.water potable the into water contaminated of backsiphonage Prevents • applications. use of point indoor for Designed • pressureapplications. continuous for preventer backflow hazard Health • 008PCQT Series 0MQ/0MF 09 50 2 800M4QT/800M4FR 1 800M4QT/800M4FR 800M4QT/800M4FR 800M4QT/800M4FR 0MQ/0MF 55 25 1 800M4QT/800M4FR 1 800M4QT/800M4FR MODEL SIZE (DN) SIZE MODEL 0PQ 55177 127 5 25 1 008PCQT 008PCQT 008PCQT 008PCQT sizes watersupply contaminatedwater into thepotable water of point downstream connections subject to continuous pressurecontinuous to subject deck/machine mounted. deck/machine 800MQT 800MQT MODEL A strainer is recommended to be installed ahead of the backflow preventer to prevent to preventer backflow the of ahead installed be to recommended is strainer A 1 1 3 ⁄ ⁄ 2 ⁄ 2 8 " – 1" (15 – 25mm) – (15 1" – " " – 2" (15 – 50mm). NPT female NPT 50mm). – (15 2" – " " – 1" (10 – 25mm). NPT female connections female NPT 25mm). – (10 1" – " 3 1 3 n mi.m n mi.m n mls kgs. lbs. mm in. mm in. mm in. mm in. mm in. ⁄ ⁄ ⁄ 4 2 8 1 ⁄ 4 n mi.m n mi.m n mls kgs. lbs. mm in. mm in. mm in. mm in. mm in. 04 4 20 4 15 10 3 1 3 1 SIZE (DN) SIZE 1 1 " – 2" (32 – 50mm) – (32 2" – " ⁄ ⁄ ⁄ ⁄ 4 2 4 2 ⁄ ⁄ For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 2 4 09299 4 4 229 20 15 9 6 8 40 127 32 5 5 20 15 5 3 1 ⁄ ⁄ ⁄ 16 8 8 ABCD 7 7 1 5 1 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 2 182 178 7 5 125 5 111 107 8 8 2 8 2 8 B D ABC 2 5 3 5 124 9 229 124 241 9 7 219 6 139 137 1 1 1 ⁄ ⁄ ⁄ 2 2 2 DIMENSIONS (APPROX.) DIMENSIONS ( 3 3 5 1 1 1 1 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 8 8 8 2 2 2 4 ⁄ DIMENSIONS (APPROX.) DIMENSIONS 8 9 2 191 1 1 140 140 " – 1") – " request literature ES-WB. literaturerequest WattsBoxEnclosures, For ES-800M4FR. or ES-800M4QT literaturerequest information, additional For Pressure:150psi Working Maximum • Temperature140°F – 33°F Range: • Specifications 3 2 2 137 3 137 3 245 241 2 2 191 2 165 159 (10.3 bar) (10.3 60°C) – (0.5°C 9 9 3 3 ⁄ ⁄ ⁄ ⁄ 16 16 8 8 9 9 1 1 1 1 1 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 2 2 4 4 4 4 04 3 40 40 05 4 60 60 42 2 64 6 64 6 83 5 83 4 83 3 70 3 65 65 15 15 11 3 1 5 7 7 3 1 3 3 ⁄ ⁄ ⁄ ⁄ 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 8 8 8 8 8 4 4 4 16 16 ( 1 ⁄ 2 " – 2") – " 6 858.4 6.1 18.5 4.9 13.5 2.7 162 11.0 1.6 159 6.0 146 3.5 121 100 0 . .5 .7 1.7 1.6 106 100 3 . 2.2 4.8 1.7 3.8 130 117 3301.4 1.4 3.0 3.0 73 73 1.6 3.5 94 WEIGHT WEIGHT tained ball valve shutoffs. Sizes shutoffs. valve ball tained – 800MQT L – L – S factory) (contact Teeof place handles in flats wrench – SC Suffix: add Models #5551473. Sizes #5551473. Patent protection.freeze for valve – 800M4FR Models (15 and 20mm) and (15 left sided test cock test sided left bronze strainer bronze B satin chrome finish — with stem. with — finish chrome satin B compact model with self-con- with model compact Model 800M4QT with relief with 800M4QT Model 1 ⁄ 2 " – 2" (15 – 50mm) – (15 2" – " A A 800M4QT 008PCQT 1 D ⁄ C 2 " and " D C 3 ⁄ 4 " 61 Backflow Preventers & Accessories 4 7 Cu7 289 " 8 ⁄ 3 " – 1" 4 ⁄ " and " – 3" (8 – 80mm), plain " " – 2" (20 – irriga- 50mm) 1 4 4 4 ⁄ ⁄ ⁄ " – 1" (10 – 25mm) spill- 1 1 3 8 ⁄ 3 Sizes: Sizes: Sizes: Sizes: Sizes: Sizes: of inlet/outlet sizes, types of thread and end connections including com- retrofit pression fittings and hose connections configurations, and in conjunction with a setters copper horns, meter of range wide and meter boxes Series L7U2-2 easy maintenance of construction Features • Can be installed vertically or horizontally • Available with an extensive combination For additional information, request literature PG-7. • Can be installed in a variety of piping • dual check model Testable available, (8 – 10mm) with NPT female bottom inlet and outlet connections. Bronze body. resistant atmospheric vacuum breakers. vacuum atmospheric resistant NPT male connections. N388 – • Can be installed vertically or horizontally • Lead free copper body • Modular check valves for Features Models 188A – tion vacuum breaker. Plain brass finish. brass Plain breaker. tion vacuum 288A – brass finish. 288AC – (8 – 25mm), polished chrome finish. 289 – • Chloramine resistant materials • Double unions for installation ease • Replaceable seats • Center stem guides for reliable seating WEIGHT " – 3") 32 1.660 0.7 1.7560 0.8 1.7560 0.8 1.75 0.8 4 ⁄ 60 1.760 0.8 1.760 0.8 2.0 0.9 1 4 8 8 8 ( ⁄ ⁄ ⁄ ⁄ 1 3 3 3 8 8 8 A ⁄ ⁄ ⁄ 3 3 3 A 73 1 111 2 111 2 111 2 AB 8 8 8 8 ⁄ ⁄ ⁄ ⁄ 7 3 3 3 113113 2 119 2 2 AB 10 2 15 4 20 4 16 16 16 ⁄ ⁄ ⁄ 7 7 11 8 2 4 ⁄ ⁄ ⁄ 3 1 3 in. mm in. mm in. mm lbs. kgs. B B 1520 4 4 7C MODEL SIZE (DN) DIMENSIONS WEIGHT 2 4 SIZE (DN) DIMENSIONS 7U2-2 7U2-2 7U2-2 1 25 4 ⁄ ⁄ 1 25 4 in. mm in. mm in. mm lbs. kgs. 3 1 " – 1") 2 ⁄ 1 ( " – 1") 8 ⁄ 3 ( For assistance, contact your local authorized agent Watts or visit our website at www.watts.com

water into the potable water supply. (10.3 bar) minimizing pressure minimizing drop pressure kPa) (69 60°C) continuous; 180°F (82°C) intermittent (82°C) 180°F continuous; 60°C) bar) entrance or with individual outlets tial water system containment and continuous pressure applications modules. residential water meter (0.5°C to 82°C) continuous Anti-Siphon Vacuum Anti-Siphon Breakers Vacuum For additional information, request literature ES-188A, ES-288A, ES-289 or ES-N388. Specifications • NPT female inlet and outlet connections, Models 188A/288A. • Maximum temperature 180°F (82°C) at 125psi (8.6 bar) working pressure.

• breakers are designed Vacuum to protect against the backsiphonage of contaminated Series Series 188A, 288A, 289, N388

• For health hazard cross-connections not subject to continuous pressure. • Install 6" (150mm) above highest downstream point of water. Series 7 Dual Check Valves • Maximum Working 150psi Pressure: For additional information, request literature, PG-7. Specifications • Range: 33°F – 180°F Temperature •Pressure:10psi Working Minimum • Straight line, poppet-type construction Series Cu7 • kPa) (69 Pressure:10psi Working Minimum • (10.3 Pressure:150psi Working Maximum Specifications – (0.5°C 140°F – •33°F Range: Temperature • For use at the drinking water supply service supply •water drinking the at use For • Designed for non-health hazard residen- • Bronze body construction. • Uses two compact replaceable check • springs steel and seals stainless Buna-N • Installed immediately downstream of the Copper-Body Copper-Body Dual Check Valves 62 4 Backflow Preventers & Accessories • For more products to protect against thermal expansion, see pages 33-34. pages see expansion, thermal against protect to productsmore For S-Gov80. literaturerequest information, additional For 11 10", heights Standard • (43.3°C) 110°F temperature operating Maximum • Specifications and preventer backflow anti-siphon valve, fill cock ball tank Tripletoilet product: purpose • Gov.80M1 Series ** = HT *Note: – 8FR – S8 – S8C drained be – 8P – NF8 finish Chrome conditions. freezing – NF8C – 8AC and 8BC 8C, – 8B* installed – 8A* – 8* Models • Specifications connections hose other and cocks sill to attaching for Designed • pressurenon-continuous protection, backsiphonage hazard, Health • 8 Series Hose Connection VacuumBreakersConnection Hose See Model NF8. For additional information, request literature ES-8. literaturerequest information, additional For NF8. Model See Ball Cock and Thermal Expansion Relief ValveRelief Expansion Thermal and Cock Ball 8P 8FR S8C NF8 8BC 8AC 8C 8B 8A 8 MODEL S8C S8 NF8C Female NPT threaded inlet x male NPT outlet connection. outlet NPT male x inlet threaded NPT Female thermal expansion pressure relief valve. pressurerelief expansion thermal Maximum Pressure: 125psi (8.6 bar). Maximum Temperature:Maximum bar). (82°C) (8.6 180°F Pressure:125psi Maximum Sizes Brass body,Brass non-draining removable, same as above with plain brass finish brass plain with above as same Thermoplastic body with “non-removable” feature and equipped to allow sill cock to cock sill allow to equipped and feature“non-removable” with body Thermoplastic Hose threaded connections, female inlet x male outlet connection; outlet male x inlet female connections, threaded Hose “Non-removable” feature, drainable. Interlocking spring prevents removal once removalprevents spring Interlocking drainable. feature,“Non-removable” Brass body, with breakaway set screw to prevent removal, drainable removal,prevent to screwbody, set Brass breakaway with Freeze relief feature. Protects the valve from freeze damage freezefrom valve the Protectsfeature. relief Freeze same as above with brass finish brass with above as same Designed for tub and shower hand spray sets. Chrome finish Chrome sets. spray hand shower and tub for Designed Model 8, 8A, and 8B are not suitable for frost-freehydrants. for suitable not are 8B and 8A, 8, Model Specifically designed for wall and yard hydrants, permits manual draining for draining manual permits hydrants, yard and wall for designed Specifically 3 ⁄ 4 " (20mm) hose thread (HT) female inlet x inlet female (HT) thread hose (20mm) " 3 1 1 3 3 3 3 3 3 3 3 3 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 8 2 2 4 4 4 4 4 4 4 4 4 4 n mi.m n mo.gm. oz. mm in. mm in. mm in. * 01 1 1 10 15 15 F** F** F** T2 1 20 1 1 HT 1 20 1 20 1 20 1 HT 20 1 HT 20 1 HT 20 1 HT 20 HT 20 HT 20 HT HT HT SIZE (DN) SIZE For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For same as above in chrome finish chrome in above as same ( 3 ⁄ 8 " – " 1 ⁄ 2 " or 12 or " 3 ⁄ 4 ") 1 ⁄ 2 " (250, 292, or 318mm) or 292, (250, " 1 1 1 3 1 1 3 3 1 1 1 3 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 4 4 4 4 2 2 8 8 2 2 2 8 4 AB DIMENSIONS (APPROX.) DIMENSIONS (10", 11 (10", 825 . 151.2 151.2 5.3 5.3 1 50 1 50 1 32 1 32 2 32 2 44 1 38 1 38 1 35 1 35 1 38 1 38 38 35 41 44 3 ⁄ 4 " (20mm) HT male outlet connection outlet male HT (20mm) " 1 1 1 1 3 1 1 3 1 3 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 2 2 2 2 8 2 2 8 2 4 2 ⁄ 2 ", 12 ", 840113.4 113.4 113.4 4.0 42.5 4.0 56.7 4.0 38 1.5 38 2.0 38 113.4 38 113.4 35 113.4 4.0 113.4 4.0 113.4 4.0 38 113.4 4.0 38 4.0 35 4.0 38 38 38 1 ⁄ 2 ") WEIGHT CFR-21-177-2600,ANSI/ASSE1002.No. siphonapprovedcocks,ballFDA under certifiedCSAIAPMOanti-andListedfor by Standards A Gov.80-M1 B 8FR 8B 63 Backflow Preventers & Accessories 4 B SD2 SD3 TWS Across Across Corners Corners B A " (8mm) Male NPT " (10mm) Male NPT " (8mm) SAE Male Flare Male SAE " (8mm) " (10mm) SAE Male Flare Male SAE (10mm) " " (10mm) Female NPT " (8mm) SAE Male Flare " (10mm) SAE Male Flare " (8mm) Female NP " (10mm) Female NPT 4 8 ⁄ ⁄ 4 8 " (8mm) SAE Female Flare Female SAE (8mm) " 8 4 8 4 8 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 3 4 " (10mm) SAE Female Flare Female SAE (10mm) " 1 3 A ⁄ 3 1 3 1 3 8 1 ⁄ 3 C (12.1 bar) D SD2-FF – • Maximum Working 175psi Pressure: For additional information, request literature ES-TWS. SD3-MF – SD3-MF – SD3-MF – For additional information, request literature ES-SD3. Models SD2-MN – For additional information, request literature ES-SD2. SD2-MN – SD2-FN – SD2-MF – SD2-FF – SD2-FN – SD2-MF – 43 43 43 43 43 43 27 27 27 27 27 27 27 27 mm 16 16 16 16 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 11 11 11 11 11 11 16 16 16 16 16 16 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 1 1 1 1 1 in. 1 1 1 1 1 1 1 1 484848 1 48 1 48 1 48 1 1 1 8 8 8 8 8 8 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 7 7 7 7 7 7 " (8mm) Male NPT " (10mm) Male NPT " (8mm) Female NPT 4 8 4 ⁄ ⁄ ⁄ 1 3 76 76 76 76 76 76 71 71 mm 1 DIMENSIONS (APPROX.) ", 1" (20, 25mm), NPT male 4 ⁄ 3 272727 1 1 1 272727 1 1 1 AB DIMENSIONS (APPROX.) outlet connection shaft lengths (0.5°C – 60°C) continuous; 180°F (82°C) intermittent conditions 16 16 16 16 16 16 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ • 8", 10", 12" (200, 250, 300mm) • Range: 33°F – 140°F Temperature Specifications • Sizes Models SD3-MN – SD3-MN – SD3-MF – • For continuous or intermittent pressure • installations supply water for strainer Wye 1 1 1 1 1 1 3 3 3 3 in. 13 13 ") ") 8 8 ⁄ ⁄ 3 3 114114114 1 1 1 114111114 1 1 1 ", 1") ABCD 4 " – " – ⁄ 83 82 83 82 4 4 3 10 10 10 10 ⁄ ⁄ mm ( 2 2 2 2 8 2 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 1 1 1 3 1 ( ( SIZE (DN) 84 84 84 1010 4 10 4 4 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com 8 8 4 4 8 8 4 4 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 3 3 1 1 3 3 1 1 in. SIZE (DN) 4 4 8 8 4 8 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 3 3 1 3 in. mm in. mm in. mm in. mm in. mm

(PVB), atmospheric vacuum breaker vacuum atmospheric (PVB), reduced or (DC) check double (AVB), preventers backflow (RPZ) zone pressure supply from the outside Carbonated Beverage Equipment and Equipment Beverage Carbonated for tea and equipment coffee dispensing water potable the into water contaminated backflow backpressure to due supply equipment equipment for tea and coffee supply from carbon dioxide and carbonated water supply due to backflow backpressure SD2-MN SD2-FN SD2-FN SD2-FF SD2-FF SD2-MN SD2-MF SD2-MF MODEL SD3-MF SD3-MF SD3-MN MODEL SD3-MN SD3-FN SD3-FN • Non-freeze wall hydrant • supply Water shutoff is key operated • breaker vacuum pressure with use For

• For use on irrigation sprinkler systems • Provides access water to the home’s Series TWS

• for use on Post-Mix Recommended • potentially of flow reverse the Prevents • Designed for protection of the water Series SD3 • Prevents the reverse flow of potentially contaminated water into the potable water • Recommended for use on Post-Mix Carbonated Beverage Equipment and dispensing Series Series SD2 Key Operated Hydrants Wall for Irrigation System Winterization Dual Check with Valve Atmospheric Port Dual Check Valve • Designed for protection of the water supply from carbonated water • For continuous or intermittent conditions pressure 64 4 Backflow Preventers & Accessories Wgt. 8 lbs. (3.6 kg) (3.6 lbs. 8 Wgt. Temperature:Maximum (98.9°C) 210°F bar) (12.1 Pressure:175psi Maximum preventers backflow testable all testing for Designed • assembly preventer backflow testable any to Testconnects easily kit • scale full accuracy 2% +/- • TK-9A Model • An advanced piece of test equipment designed to make pressure and differentialpressureand make to designed equipment test of piece advanced An • scale full accuracy 0.2% +/- • Capability.Download Computer and Print-Out Digital with TK-DL Model Wgt. 15 lbs. (6.8 kg). (6.8 lbs. 15 Wgt. case rugged a and unit print-out digital adapters, hoses, Contains • Accuracy,portability,documentation and versatility • Wgt. 3 lbs. (1.4 kgs.) (1.4 lbs. 3 Wgt. TestsPVB’sRPZ’s,or checks Double • • LCD display with oversized differential characters and separate supply pressurereadout supply separate and differentialcharacters oversized with display LCD • kit test preventer backflow digital held, hand Compact, • accuracy scale full 0.25% Features • TK-99D Model Wgt. 5 lbs. (2.3 kg) (2.3 lbs. 5 Wgt. 007 and 709 7, WattsModel the of Testsmodules check individual • valves check double and check dual testing for tube sight Watercolumn • TK-7 Model Wgt. 8 lbs. (3.6 kg) (3.6 lbs. 8 Wgt. preventers backflow testable all testing for Designed • hoses valves, coded color with kit test Compact • scale full accuracy 1% +/- • TK-99E Model gauges obsolete in the testing of backflow preventers backflow of testing the in obsolete gauges gauge, high impact casing impact high gauge, and top mounted bleed valves bleed mounted top and For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For request literature ES-TK-99D. literaturerequest information, additional For requestliterature ES-TK-7. Foradditional information, request literature ES-TK-DL literaturerequest . information, additional For request literature ES-TK-9A. literaturerequest information additional For request literature ES-TK-99E. literaturerequest information, additional For TK-99D TK-99E TK-DL TK-9A TK-7 65 Backflow Preventers & Accessories 4 SS07F TR FR 500 RK-EZ-STD WVS MJ x FL For additional information, request literature PF-WVS. For additional information, request literature ES-SS07F. For additional information, information, additional For ES-TR. literature request • 8-3.2 Section 24 NFPA meet to Designed • AWWA C900 Inlet • AWWA C606 Outlet For additional information, request literature ES-FR500. For additional information, request literature ES-RK-W-STD. 125# flanged connections flanged 125# (0.5°C – 43°C) Available in 4" – 10" (102 – 254mm) with 254mm) – (102 10" – 4" in Available requirements local all meet to lengths various allows one person to position and handle the riser one-piece construction reduces time and labor; no missing parts, no leaks; easily identifiable for approvals ") Specifications • Range: 33°F – 110°F Temperature bar). (12.1 175psi •Pressure: Working Rated • • Ease of installation and lightweight • Minimal site preparation; joint restraint • UL/FM approved • 4 Specifications • 35°F (1.6°C) Working Temperature: • Maximum 175psi Pressure: (12.1 bar) ⁄ 3 " – 8 ⁄ 1 ( (4" – 10") (4" – 10") For assistance, contact your local authorized agent Watts or visit our website at www.watts.com " (20mm) 4 ⁄ 3

the backflow preventer temperature costs associated with field assembly transition fitting to connect the municipal water supply into the building overhead fire system leakage or misuse of water in fire line struction type 304SST meter. Size meter.

• Valve • and Valve meter support stands for quick & easy installation • All-welded steel construction • Corrosion resistant coating • Interior drain hole • Available in 10" to 38" heights Series RK-W-STD • Designed to keep water from freezing in • Compact • Easy to install • Low maintenance • Controlled by water temperature vs. air • IAPMO approved Transition Riser Transition Stainless Stainless Steel Single Detector Checks

Features • Reduces installation time and labor • Corrosion resistant stainless steel con-

Series TR • Durable and easy to install underground • By-pass assembly kits with GPM/CFM • For automatic fire sprinkler systems • With detects optional by-pass assembly, Series Series SS07F Series FR 500 Thermostatic Freeze Relief Kits

Valve Setters Valve for Quick Backflow Installation • Available Sizes: 3", 4", 6", 8" and 10" (80, 100, 150, 200 and 250mm) • Compact • Corrosion resistant epoxy coating • Eliminates thrust blocks at the backflow • Fits 757N/757NDCDA, 957N, 957NRPDA Series WVS 66 4 Backflow Preventers & Accessories • WattsBox enclosures are lockable and can be anchored be can and lockable are WattsBoxenclosures • • For backflow preventers 2 preventers backflow For • Flanges and Spools Make-Up W-FLG and W-SPL Series for enclosures construction fiberglass access, top Flip • Specifications to protectionprovide to source heat controlled thermostatically without or with Available • purposes maintenance for Removable • preventer backflow of testing/certification for access Easy • NFPAmeet guidelines. to Designed fiberglass. or reinforcedaluminum is Construction • that assemblies preventer backflow RPZ and check Double PVB, for made Especially • EnclosuresProtectionFreeze Preventer Backflow WattsBoxWB Series • Make-up flanges for use in piping applications where there is a need for additional fitting additional for need a is therewhere applications piping in use for flanges Make-up • where installation an into preventers backflow retrofittinga when use for spools Make-up • • Front access panel, aluminum construction enclosures for 2 for enclosures construction aluminum panel, access Front • heat – WPHR – heat and insulation with WattsRockshell WPLR – insulation with WattsRockshell WPLRN – WattsRockshell Options WattsRockSeries -30°F (-34°C). RPZ, protected against intrusion of foreign matter foreign of intrusion against protected RPZ, (-34°C). -30°F backflow preventers backflow lay length lay backflow preventers and preventers backflow are subjected to freezing conditions freezing to subjected are an existing backflow preventer is being replaced being is preventer backflow existing an For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 3 1 ⁄ 4 ⁄ 2 " – 2" (20 – 50mm) PBV’s50mm) – (20 2" – " " – 10" (65 – 250mm) – (65 10" – " • Available in two natural stone shades — shades stone natural two in Available • Testing/maintenanceaccess • coloring and shape Lifelike • Vandalprotection • discharge port full for sizing Drain • shell polyethylene Durable • Features slate grey and earthtone brown earthtone and grey slate 3 ⁄ 4 " – 3" (20 – 80mm) pipe size pipe 80mm) – (20 3" – " 1 ⁄ 2 " – 10" (65 – 250mm) – (65 10" – " request literature ES-WB. literaturerequest information, additional For request literature ES-Spools/Flanges. literaturerequest information, additional For request literature ES-WattsRock.literaturerequest information, additional For WattsRock WB 67 Backflow Preventers & Accessories 4 D C B6001 WEIGHT L 506084 0.595 0.6 1.1 0.2 1.4 0.3 0.5 0.6 525258 0.672 0.687 0.6 0.3 99 1.0 0.3 1.6 0.3 2.2 0.5 0.7 1.0 114159 2.0194208 5.2 0.9 13.2 15.6 2.4 6.0 7.1 108122165 3.2173 4.9 13.2195 1.5 17.5 2.2 29.3 5.9 7.9 13.3 A 8 4 2 4 8 4 16 8 4 16 2 16 16 16 16 16 16 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 3 3 1 1 5 1 7 1 1 5 5 3 1 1 7 13 13 13 11 " – 3" (8 – 80mm) have 4 ⁄ 1 161619 2 22 2 3 33 3 3856 560 6 7 127 8 3.3 1.5 1616 2 1922 2 29 2 33 3 38 3 56 4 60 4 75 6 6 7 29 4 16 2 reinforced/enhanced PTFE seats • 4" (100mm) has virgin PTFE seats • Chrome plated brass ball • Adjustable stem packing gland • stem retaining pressure proof, out Blow Features • Sizes: For additional information, request literature ES-B6000. For ball valve options, refer to page 75. 8 2 8 8 2 8 16 16 16 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 8 8 4 8 8 8 8 4 8 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 3 1 1 3 5 3 5 3 5 5 3 7 5 5 5 3 7 15 38 44 57 64 1 45 45 45 57 6484 1 1 84 1 108122 2 2 108 2 DIMENSIONS (APPROX.) 2 4 4 4 4 4 4 4 4 2 4 16 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 3 1 3 1 3 3 3 1 1 1 5 5 13 129132146 1 1 2307 51 312 4 4 102 2 135140 2 2 294 51 295384 4 4 4 102 2 290 3 206 3 76 1 ACDL 8 8 8 16 16 16 ⁄ ⁄ ⁄ 2 4 8 ⁄ ⁄ ⁄ 16 16 16 ⁄ ⁄ ⁄ 1 5 1 ⁄ ⁄ ⁄ 5 9 7 1 3 1 1 3 5 " – 3" (8 – 80mm) 4 ⁄ 1 " – 3" (8 – 80mm) 4 ⁄ 1 9.5 5 9.59.5 5 5 127 127 1 1 64.0 12 22.032.0 5 38.0 764.0 11 11 178 27913.017.022.0 5 3 3 5 32.0 638.0 76 8 11 150 1 2 13.017.0 5 5 127 1 " – 4") 4 " – 2" (8 – 50mm) ⁄ 4 ⁄ 1 1 BALL ( Orifice 2 4 2 2 4 2 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 8 8 2 16 8 8 8 16 2 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 1 1 1 7 3 1 7 3 3 1 11 11 " – 3" (8 – 80mm) 4 ⁄ 1 8 3240 165 1 25.0 2 8 51.0 12 203 2 65 210 15 51.020 11 10 15 20 3240 1 1 25.0 7 178 2 " – 3" (8 – 80mm) – 600psi (41.3 bar) WOG (non-shock) – 4 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com " – 3") ⁄ 1 8 ⁄ 3 " – 3" (10 – 80mm), solder connections " – 4" (8 – 100mm), NPT female connections ( 8 4 ⁄ ⁄ SIZE (DN) 4 2 2 2 4 2 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 3 1 8 2 4 4 8 2 4 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 1 1 1 in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. 3 1 3 3 1 3 1 Sizes Sizes

Pressure Rating: Pressure 150psi (10.3 bar) WSP 4" (100mm) – 400psi (27.5 bar) WOG (non-shock) – 125psi (8.6 bar) saturated steam, over 150psi (10.3 bar) requiring SS trim Range: 0°F to 450°F Temperature (-18°C – 232°C) at 50psi (3.4 bar) for PTFE reinforced/enhanced seats. 0°F – 350°F (-18°C – 177°C) at 50psi (3.4 bar) for Virgin PTFE seats. – Flammable liquids (YRBX) – Compressed gas (YQNZ) – Fire protection (HNFX), sizes – For #1 and #2 Fuel Oil (MHKZ), sizes – Natural/Manufactured gas (YRPV), sizes – LP Gas (YSDT), sizes B6001B6001 1 B6001 2 3 80 2 B6000B6000 2 4 100 3 76.0 15 B6001 B6001 1 25 B6000 B6000B6000 1 1 25 B6001 2 50 1 B6001 B6001 1 B6000B6001 3 80 2 B6000 2 50 1 B6000 B6000 1 B6000 B6000 MODEL Meets Federal Specification and WW-V-35C, complies with MSS-SP-110. B6000 – UL: UL approved for: Standards B6001 – Models B6000 – Specifications • • ball valves Two-piece • For commercial and industrial applications • Suitable for a full range of liquids and gases B6001 B6001 Series Series B6000 2-Piece, 2-Piece, Standard Port, Bronze Ball Valves • • 5 Ball Valves 68 B6081 – B6081 2-Piece, Full Port, Bronze Ball ValvesBall Bronze Port, Full 2-Piece, For additional information, request literature ES-B6080. literaturerequest information, additional For 75. page to refer options, valve ball For – B6080 Models MSS-SP-110 with Complies • bar) (3.4 50psi at 177°C) – (-18°C Temperature350°F – 0°F Range: • WSP bar) (10.3 150psi and (non-shock) WOG bar) (41.3 600psi PressureRating: • Specifications seals and seats PTFE • applications industrial and commercial For • Two-piececonstruction • B6081 B6080, Series 1 1 3 1 n mi.m n mi.m n mi.m n mi.m b.kgs. lbs. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. ⁄ 025 10 50 5 2 25 50 1 2 25 1 1 1 4 ⁄ 2 IE(N ALOIIETHREADED ORIFICE BALL (DN) SIZE ⁄ ⁄ 2 4 01 1 40 32 20 15 Sizes: Sizes: 3 1 1 1 1 1 ⁄ ⁄ For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 4 2 ⁄ ⁄ ⁄ ⁄ 2 4 2 2 " – 2" (15 – 50mm), solder connections solder 50mm), – (15 2" – " connections female NPT 50mm), – (15 2" – " For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 95175 7 127 7 38 5 32 4 19 13 11 25 9 7 11 ⁄ ⁄ ⁄ ⁄ 16 16 16 32 ⁄ 16 A 7 12941225 5 50 2 102 4 279 11 7 272 7 195 5 192 138 4 121 11 9 5 7 7 ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 8 16 8 SOLDER A‡ ( 1 0 61 76 1 50 3 2 200 2 192 1 145 1 135 124 ⁄ 2 " – 2") – " 7 3 5 ⁄ ⁄ ⁄ 8 4 8 DIMENSIONS (APPROX.) DIMENSIONS DL CD 512 2 25 1 73 1 45 41 7 5 1 1 ⁄ 8 ⁄ ⁄ ⁄ 8 2 4 14 4 41 3 38 32 2 22 13 7 9 9 3 1 ⁄ ⁄ ⁄ THREADED ⁄ ⁄ ⁄ 16 16 32 8 8 16 3 5 004.5 10.0 152 6 4 137 4 113 105 13 2 91 2 71 58 13 5 9 3 7 ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 4 8 16 SOLDER A, A‡ A, L‡ 2 . 2.5 1.8 5.5 4.0 121 110 8180.8 0.5 1.8 0.3 1.0 98 0.6 71 65 L, L‡ L, WEIGHT B6080 C D 69 Ball Valves 5 EMVII-6400SS WEIGHT " & 3" (65 2 ⁄ 1 5757 8.7557 8.75 3.9 76 8.75 3.9 87 9.25 3.9 10.25 4.2 4.6 100 10.75110 11.75124 4.9 14.25165 5.3 23.00173 6.5 10.4 27.50 12.5 Sizes 2 4 4 4 8 16 8 2 16 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 7 7 1 7 5 15 13 †† 1616 2 16 2 19 2 2 29 3 3541 4 4 " – 3") 4 DL ⁄ 8 8 8 1 ⁄ ⁄ ⁄ 8 8 8 4 ⁄ ⁄ ⁄ ⁄ ( 5 1 3 ––6 ––6 5 5 5 3 DIMENSIONS (APPROX.) 308360 1 368 198 198 198 208227 1232 1 25 1 3 C 8 2 16 ⁄ ⁄ 16 16 16 16 16 8 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 3 1 13 13 13 13 15 87 65 14 1015 7 20 7 83240 8 203 9 2 4 2 ⁄ ⁄ ⁄ 4 8 2 4 ⁄ ⁄ ⁄ ⁄ 1 1 1 SIZE (DN) in. mm in. mm in. mm in. mm lbs. kgs. 1 3 1 3 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com " – 2" (8 – 50mm) are 600psi (41.3 bar) WOG (non-shock); sizes MODEL 4 ⁄ " – 2" (8 – 50mm) are available 115-8, 115-35 and 24-40. 1 4 ⁄ 1

" – 3" (65 – 80mm), 400psi (27.6 bar) WOG (nonshock) 2 ⁄

1 2 Sizes † EMVII-6400SS--24-40 1 † EMVII-6400SS-115-8 † EMVII-6400SS-24-40 1 25 8 † EMVII-6400SS-115-35† EMVII-6400SS-24-40 1 2 50 12 † EMVII-6400SS-115-8 † EMVII-6400SS-115-35 † EMVII-6400SS-115-8

2-Piece, 2-Piece, Standard Port, Bronze Electric Motor Valves Series Series EMVII-6400SS †† EMVII-6400SS-115-25†† EMVII-6400SS-115-25 2 3 80 14 and 80mm) also available 24-25. † For additional information, request literature ES-EMVII-6400SS. literature request information, For additional Specifications • (7bar) 100psi Pressure: Working Steam • Sizes: • Combination shutoff quarter-turn ball valve and electric actuator • Compact and completely assembled • 250°F (121°C) Maximum Operating Temperature: • and models 24VAC 115VAC • 150°F Maximum (66°C) Ambient Room Temperature: 5 Ball Valves 70 B6781 – B6781 2-Piece, Full Port, Bronze Diverter Ball ValvesBall Diverter Bronze Port, Full 2-Piece, Foradditional information, request literature ES-B6780. – B6780-M1 Models bar) (3.4 50psi at 177°C) – (0°C Temperature350°F – 32°F Range: • bar) (8.6 125psi and (non-shock) WOG bar) (27.6 400psi PressureRating: • Specifications applications industrial and commercialresidential, For • valve diverter Three-way • Two-piececonstruction • B6780 Series 2-Piece, Full Port, Ball and Waste Bronze Ball ValvesBall WasteBronze and Ball Port, Full 2-Piece, B6301 – B6301 For additional information, request literature ES-B6002. literaturerequest information, additional For Sizes: • Specifications connection female NPT x connection NPT Male • B6002 Series ES-B6300. literaturerequest information, additional For – B6300 Models (non-shock) WOG bar) (27.6 400psi PressureRating: • Specifications position closed the in is valve when line downstream of venting or draining For • B6301 B6300, Series • High cycle life reinforced PTFE stem packing seal and thrust washer thrust and seal packing stem reinforcedPTFE life cycle High • stem proof Blow-out • ball brass plated Chrome • bar) (3.4 50psi at 232°C) – (-29°C Temperature450°F – -20°F Range: • bar) (10.3 150psi (non-shock), WOG bar) (41.3 600psi PressureRating: • 2-Piece, Standard Port, Bronze Ball ValvesBall Bronze Port, Standard 2-Piece, saturated steam saturated Temperature Range: 0°F – 350°F (-18°C – 177°C) at 50psi (3.4 bar) (3.4 50psi at 177°C) – (-18°C Temperature350°F – 0°F Range: saturated steam saturated Sizes 1 Sizes Sizes ⁄ 4 " – 1" (8 – 25mm), have male NPT connection x female NPT connection NPT female x connection NPT male have 25mm), – (8 1" – " Sizes 1 1 1 ⁄ ⁄ 2 ⁄ 2 2 " – 1" (15 – 25mm), solder connections. solder 25mm), – (15 1" – " " – 1" (15 – 25mm), solder connections solder 25mm), – (15 1" – " " – 1" (15 – 25mm), NPT threaded connections. threaded NPT 25mm), – (15 1" – " 1 For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For ⁄ 4 " – 2" (8 – 50mm), NPT female connections female NPT 50mm), – (8 2" – " ( ( 1 1 ⁄ ⁄ 4 4 " – 2") – " " – 1") – " , B6781 , ( 1 ⁄ 2 " – 1") – " ( 1 ⁄ 2 " – 1") – " B6002 B6780 B6301 71 Ball Valves 5 B6010 B6400 B6400-SE For additional information, request literature ES-B6400-SE. For ball valve options, refer to page 75. For additional information, request literature ES-B6400. For additional information, information, additional For ES-B6010. literature request " – 2") 2 ⁄ 1 ( " – 2" 2 ⁄ " – 1" (15 – 25mm) 1 2 ⁄ 1 " – 2") 4 ⁄ 1 ( " – 4") 4 ⁄ 1 ( " – 4" (65 – 100mm) 400psi (27.6 bar) WOG (non-shock); 2 ⁄ " – 2" (8 – 50mm) 600psi (41.3 bar) WOG (non-shock); 150psi 1 4 ⁄ For assistance, contact your local authorized agent Watts or visit our website at www.watts.com (10.3 bar) WSP 2 125psi (8.6 bar) WSP 1 " – 2" (8 – 50mm), NPT female connections. " – 2" (15 – 50mm) " – 4" (8 – 100mm), NPT female connections 4 ⁄ 2 4 ⁄ ⁄ 1 Solder union connection x solder connection, union NPT female connection x NPT female connection, Solder connection x NPT male connections, 1 1

not steam rated due to union gasket " – 2" (15-50mm) 2 ⁄ B6011 – • Range: 0°F – 225°F Temperature (-18°C – 107°C) at 200psi (13.8 bar) • Rating: Pressure 400psi (27.6 bar) WOG (non-shock) threaded and solder ends; B6010 – 1 Models • Sizes Specifications • Maintenance of ball valve can be done without dismantling pipe line • construction Two-piece Series Series B6010, B6011, B6013 (15 – 50mm) B6013 – 2-Piece, 2-Piece, Standard Port, Bronze Ball Valves 2-Piece, Standard Port, Bronze Ball with Valves Mounting Pad 2-Piece, • Range: -55°F – 425°F Temperature (-48° – 218°C) at 50psi (3.4 bar) • Rating: Pressure Specifications • Sizes

• construction Two-piece • Bronze body • Chrome plated brass ball • For commercial and industrial applications Series B6400 2-Piece, Standard Port, Bronze Ball with Valves Safety Exhaust • Rating: Pressure 175 CWP (12.1 bar). • Range: 50°F – 120°F Temperature (10°C – 49°C). Specifications • Sizes:

• construction Two-piece • Bronze body • Chrome plated brass ball • For industrial air applications • Ideal for use where protection of machine tools is critical • Unidirectional valve vents downstream air when in closed position Series B6400-SE 5 Ball Valves 72 • Pressure Rating: 200psi (13.8 bar) CWP (non-shock) CWP bar) (13.8 200psi PressureRating: • Specifications • B6001-CC B6000-CC Series Models ValvesBall Bronze Port, Standard 2-Piece, • 3-Piece, Full Port, Brass Ball ValvesBall Brass Port, Full 3-Piece, 50°F – 120°F (10°C – 49°C) – (10°C 120°F – 50°F maximum WOG, bar) (10.0 145psi at rated seals, and seats B6800SE – B6801 ‡= Solder connections Solder ‡= – B6800 Models PressureRatings: • Specifications applications industrial and commercial For • design maintenance in-line Three-piece, • B6801 B6800 Series • Temperature Range: 0°F – 450°F (-18ºC – 232°C) at 50psi (3.4 bar) (3.4 50psi at 232°C) – (-18ºC Temperature450°F – 0°F Range: • 60,B81 1 B6800,B6801‡ 60,B81 025 3 50 2 50 2 B6800,B6801‡ 60,B81 1 B6800,B6801‡ B6800,B6801‡ – B6800, – B6800, MODEL 60,B81 512 2 25 1 25 1 B6800,B6801‡ B6800,B6801‡ B6000-CC B6001-CC Sizes: Sizes: (safety exhaust) — for downstream exhaust downstream for — exhaust) (safety has solder end x end solder has has female NPT x NPT female has 1 1 ⁄ ⁄ 2 4 ( " – 2" (15 – 50mm) solder connections solder 50mm) – (15 2" – " connections female NPT 50mm) – (8 2" – " 1 ⁄ 2 For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For " – 2") – " 1 (10.3 bar) WSP requires SS trim requiresSS WSP bar) (10.3 150psi Over sizes. all WSP bar) (10.3 150psi (non-shock); 1 3 1 3 1 n mi.m n mi.m n mls kgs. lbs. mm in. mm in. mm in. mm in. mm in. ⁄ 1 1 4 ⁄ ⁄ ⁄ ⁄ 1 4 2 8 4 ⁄ ⁄ " – 1" (8 – 25mm) 600psi (41.3 bar) WOG (non-shock); WOG bar) (41.3 600psi 25mm) – (8 1" – " ⁄ 2 4 4 SIZE (DN) SIZE " – 2" (32 – 50mm) rated at 400psi (27.6 bar) WOG bar) (27.6 400psi at rated 50mm) – (32 2" – " ( 1 ⁄ 2 " – " 3 01 1 40 32 20 15 10 ⁄ 3 8 4 ⁄ " hose end with end cap and chain and cap end with end hose " 4 " hose end with end cap and chain and cap end with end hose " ( 3 1 ⁄ ⁄ 4 4 ") " – 2") – " 3 1 3 3 1 1 ⁄ ⁄ ⁄ ⁄ BALL ORIFICE BALL 4 2 8 8 ⁄ ⁄ 2 4 ( 1 ⁄ 2 " – " 237 1 76 3 3 38 2 32 1 1 19 1 13 10 10 3 1 ⁄ ⁄ 4 4 " – 2" (8 – 50mm), Virgin PTFE Virgin 50mm), – (8 2" – " ") 7 1 3 1 3 3 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 8 2 4 4 4 4 4 CD 825 6 50 2 1 98 1 89 1 70 57 44 44 44 DIMENSIONS (APPROX.) DIMENSIONS 7 7 7 3 1 3 7 ⁄ ⁄ ⁄ 8 8 8 ⁄ ⁄ ⁄ ⁄ 4 2 8 8 4517934.2 9.3 127 5 4 3 44 3 38 2 35 2 48 2 22 22 22 literature ES-B6000. literature request information, additional For request literature ES-B6800. literaturerequest information, additional For 5 1 7 1 3 3 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 8 2 8 4 8 8 8 L (L‡) L 6 386.3 2.9 13.8 6.3 168 114 8411.9 1.1 0.5 4.1 0.5 2.5 0.5 1.1 1.1 98 1.1 83 60 60 60 L (L‡) L B6000-CC WEIGHT B6800 D C 73 Ball Valves 5 IT6300 Tee Handle Tee Oval Handle Round Handle Locking Handle Extended Handle For additional information, request literature ES-IT6300. * * * * * * (specify closed position) closed (specify " – 1") – 2 8 – 50– 2– 4 15 – 50 – 2 LL-HK 8 – 100– 2 15 – 50 – 4 15 – 50 – 2 LH-HK 8 – 100 15 – 50– 2 (without lock) LL-HK – 2 8 – 50 8 – 50– 2 RH-HK 8 – 50 SH-HK0 XHK-LH – 3– 2– 2 8 – 80 – 3 8 – 50 20 – 50 – 3 8 – 80 8 BHK – 80 * – 2 8 – 50 * All All TH-HK All All OH-HK All All All All All All BSK-SS All All SSK-01 2 2 4 2 4 4 4 4 2 4 2 4 4 4 4 4 4 ⁄ in. mm ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 ( All All All All All All All All B6400 MODELS SIZES KIT DESCRIPTION B6000/B6001 All All B6800/B6801 B6800/B6801 B6080/B6081 B6800/B6801 B6800/B6801 B6000/B6001B6800/B6801 All All B6000/B6001 B6000/B6001 B6000/B6001 All All B6000/B6001 B6400/B6400SE B6400/B6400SE B6800/B6801/B6400 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com Seat & Seal PTFE ® " – 1" (15 – 25mm), solder connections " – 1" (15 – 25mm), NPT threaded connections Tee Handle Tee 2 Oval Handle 2 UL Approved UL ⁄ ⁄ (without lock) Satin Chrome Round Handle Safety Exhaust B6400/B6800/B6801 All All 1 Assembled Dry 1 Grounded Stem Balance Stop Plate Mineral Filled PTFE HANDLE OPTIONS Closed Position (without lock) B6400SE Sizes Sizes Ball valve no option kit only, available

G Grounded Ball & Stem All SS Models LL Latch Lock Lever Handle B6000/B6001 04 LC Latch Lock Lever Handle B6800/B6800SE VT (01)Teflon Virgin SE TH LH Locking Lever Handle UL SC SS Stainless Steel Ball & Stem BS SH Stainless Steel Lever Handle & NutXH All Extended Lever Handle OV GS AD RH SUFFIX DESCRIPTION Z15 Without Lever & Nut

* NOTE: For additional information, request literature PL-RP-GP. Ball Valve Ball Options Valve and Repair Kits 2-Piece, Full Port, Ball and Brass Waste Ball Valves Models IT6300 – Specifications • Rating: Pressure 600psi (41.3 bar) WOG (non-shock) • Drain cock allows draining of downstream line when valve is in closed position Series IT6300, IS6301 IS6301 – 5 Ball Valves 74 PressureRating: • seats. PTFE • Specifications Two-piececonstruction • gases or liquids non-abrasive For • applications balancing and throttling for Excellent • FBV Series 2-Piece, Full Port, Bronze Ball ValvesBall Bronze Port, Full 2-Piece, • Temperature Range: 0°F – 350°F (-18°C – 177°C) at 50psi (3.4 bar) (3.4 50psi at 177°C) – (-18°C Temperature350°F – 0°F Range: • PressureRatings: • 204°C) to (-40°C Temperature400°F to -40°F Range: • Specifications ( approved CSA • 61 Standard NSF/ANSI to Certified • MSS-SP-110 with Complies • gases and liquids range full a for Suitable • FBV-3C,FBVS-3C Series 2-Piece, Full Port, Brass Ball ValvesBall Brass Port, Full 2-Piece, Quick-Connect TechnologyQuick-Connect Valveswith Ball Brass Port, Full 2-Piece, • Pressure Ratings: 200psi @180°F (13.8 bar @ 82°C) @ bar (13.8 @180°F 200psi PressureRatings: • 82°C) to (-40°C Temperature180°F to -40°F Range: • Specifications tools of use the without reused and removed be Can • pressureunder rotated be Can • 1061 ASSE to Approved • pipe PB Copper,and with PEX used CPVC, be Can • connections outlet and inlet Quick-Connect Wattsintegral • FBV-3C-QCSeries • 150psi (10.3 bar) WSP bar) (10.3 150psi • non-shock WOG, bar) (41.3 600psi • 2 WSP bar) (10.3 150psi • non-shock WOG, bar) (41.3 600psi • 2 WSP bar) (10.3 150psi • non-shock WOG, bar) (41.3 600psi • FBV-3C-SS/ FBVS-3C-SS: WSP bar) (8.6 125psi • non-shock WOG, bar) (27.5 400psi • FBVS-3C: WSP bar) (8.6 125psi • non-shock WOG, bar) (41.3 600psi • ( FBV-3C: 1 1 1 ⁄ 2 ⁄ ⁄ 2 2 " – 2" threaded only), UL Listed ( Listed UL only), threaded 2" – " " – 3" (65 – 80mm) – (65 3" – " 80mm) – (65 3" – " 1 ⁄ 4 1 " – 2" (8 – 50mm) – (8 2" – " ⁄ 2 " – 2" (15 – 50mm) – (15 2" – " 1 ⁄ 4 " – 3" threaded only), UL/FM approved UL/FM only), threaded 3" – " 1 WOG and 125psi (8.6 bar) saturated steam saturated bar) (8.6 125psi and WOG 2 WSP bar) (8.6 125psi and (non-shock), For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For ⁄ 2 1 " – 2" (15 – 50mm), 600psi (41.3 bar) WOG bar) (41.3 600psi 50mm), – (15 2" – " ⁄ 2 " & 3" (non-shock) (65 – 80mm) 400psi (27.6 bar) (27.6 400psi 80mm) – (65 (non-shock) 3" & " ( 1 1 ⁄ ⁄ 2 2 " – 2" (15 – 50mm) – (15 2" – " " – 2") – " 1 ⁄ 2 " – 2" solder) 2" – " ( 1 ⁄ 2 " – 1") – " ( 1 ⁄ 4 " – 3") – " ES-FBV-3C-QC. literaturerequest information, additional For FBVS-3C-QC literatureES-FBV-3C. Foradditional information, request handles. tee and stop, memory extension, stem 2" with Available Options Handle FBVS-3C-SS FBV-3C-SS FBVS-3C FBV-3C Models Quick-Connect end connections end Quick-Connect end connections end threaded end connections end threaded end connections end solder end connections end solder – – 1 ⁄ 4 1 " – 3" (8 – 80mm) threaded 80mm) – (8 3" – " – ⁄ 2 " – 3" (15 – 80mm) solder 80mm) – (15 3" – " – 1 – ⁄ 2 1 " – 2" (15 – 50mm) – (15 2" – " 1 ⁄ 2 ⁄ 2 " – 2" (15 – 50mm) – (15 2" – " " – 3" (15 – 80mm) – (15 3" – " FBV-3C-QC FBV-3C FBV 75 Ball Valves 5 FBV-4 FBV-PEX FBV-3-Press For additional information, request request information, additional For ES-FBV-3-Press. literature For additional information, request literature ES-FBV-4. " – 3" (8 – 80mm) threaded end connections " – 3" (15 – 80mm) solder end connections 4 2 ⁄ ⁄ 1 1 FBVS-4 Models FBV-4 " – 3") 4 ⁄ 1 ( " - 4" (15 - 100mm) and soft copper 2 " – 4") ⁄ 1 2 ⁄ 1 ( " – 1") 2 ⁄ 1 ( " – 2" (15 – 100mm) 2 ⁄ 1 " – 3" For assistance, contact your local authorized agent Watts or visit our website at www.watts.com 2 ⁄ " – 2" 600psi (41.3 bar) WOG non-shock 400psi (27.6 bar) WOG non-shock 400psi (27.6 bar) WOG non-shock 1 4 ⁄ 2 1 " (15 - 32mm) 4 ⁄ 1 " – 1 2 ⁄ 1

PEX piping manufacturers guidelines) PEX Ends are designed for use in PEX piping systems tubing Temperature Range: -40ºF to 400ºF Temperature (-40ºC to 204ºC) Rating: Pressure Specifications • Suitable for a full range of liquids or gases • Complies with MSS-SP-110 Series FBV-4, Series FBVS-4 FBV-4, 2-Piece, Full Port, Brass Ball Valves For additional information, request literature ES-FBV-PEX • Ball Rating: Valve 400 WOG • Crimp Connection Rating: 160psi at 73°F (23°C) (refer to • 2-pieces, full port design • UNS C37700 Forged brass body • PEX end designed to ASTM-F-1807 • rated Valve to 400 WOG • Crimp connection rated to 160psi at 73°F (23°C) • Designed specifically for use in PEX piping systems Specifications • Series 2-Piece, FBV-PEX Full Port, Brass Ball with Valve Series FBV-PEX Series FBV-PEX 2-Piece, Full Port, Brass Ball Valves with PEX Ends 2-Piece, 2-Piece, Full Port, Brass Ball with Valves Integral Press Fitting End Connection • UL Listed • Designed for types K, L, and M hard copper tubing • Press end connections comply to ASTM-B88 • Press connection rated to 200psi CWP up to 210°F (13.4 bar to 99°C) • Adjustable packing gland • Bottom loaded, blowout proof stem with stem O-ring seal • Press Fitting rated to 200psi CWP up to 212°F (13.4 bar to 98°C) • Dezincification-resistant brass body • NSF/ANSI 61 Certified • Designed for use in Piping ProPress® Systems Specifications Series FBV-3-Press Series FBV-3-Press 5 Ball Valves 76 with PEX Ends and Dog-Ears and Ends PEX with ValvesBall Brass Port, Full 2-Piece, • Crimp joint Crimp piping PEX to (refer (23°C) 73°F at 160psi Rating: • standard F-1807 ASTM to complying end PEX • O-rings stem NBR with bar) (27 WOG 400 ValveRating: Ball • Specifications when valve ball rthe fo support rigid provide Dog-ears • end PEX Brass feature valves FBV-PEX-DEball Series • FBV-PEX-DESeries WBVC – WBVC Models commercial,liquidsgasesandonrangeoffull a Forresidential industrialand applications • WBVC Series 2-Piece, Standard Port, Brass Ball ValvesBall Brass Port, Standard 2-Piece, WBVS-3 – WBVS-3 ValvesBall Brass Port, Standard 2-Piece, C-FBV-1– Models 3 WW-V-35C,Style TypeSpecification BZ, Federal Composition to II, Conforms Standards WSP bar) (8.6 125psi (non-shock), WOG (69.0) 1000psi PressureRating: • Specifications applications industrial and commercial For • valves ball cast Two-piece,investment port, full • S-FBV-1,C-FBV-1Series WBV-3– Models • Specifications • • • • • WBV-3,WBVS-3 Series 2-Piece, Full Port, Carbon and Stainless Steel Ball ValvesBall Steel Stainless and Carbon Port, Full 2-Piece, • S-FBV-1– manufacturers guidelines) manufacturers surface. mounting suitable a to attached systems piping pipings PEX into crimping easy for tailpiees Pressure Rating: 400psi (27.6 bar) WOG (non-shock) WOG bar) (27.6 400psi PressureRating: handles steel carbon plated Zinc duty heavy on insulator Vinyl gland packing stem Adjustable seal packing stem PTFE Virgin gases and liquids of range full for Suitable 1 Low operating torque operating Low ⁄ 4 -turn open or close operation close or open -turn Sizes Sizes Sizes Sizes: Sizes: 1 1 ⁄ 2 ⁄ 8 " – 1" (15 – 25mm), male NPT compression connections compression NPT male 25mm), – (15 1" – " 3 " – 4" (3 – 100mm), NPT threaded connections threaded NPT 100mm), – (3 4" – " 1 ⁄ 1 8 ⁄ ⁄ 4 " – 3" (10 – 80mm), solder connections solder 80mm), – (10 3" – " 4 " – 3" (8 – 80mm) stainless steel, NPT female connections female NPT steel, stainless 80mm) – (8 3" – " " – 3" (8 – 80mm) carbon steel, NPT female connections female NPT steel, carbon 80mm) – (8 3" – " For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For ( 1 ⁄ 2 " – 1") – " ( 1 ⁄ 2 " – 1") – " ( 1 ⁄ 8 " – 4") – " ( 1 ⁄ 4 " – 3") – " ES-WBV-3. literaturerequest information, additional For handles. tee and oval stop, memory extension, stem 2" with Available Options Handle ES-S-FBV-1 or ES-C-FBV-1ES-S-FBV-1or literaturerequest information, additional For literature ES-FBV-PEX-DE. literature request information, additional For ES-WBVC. literaturerequest information, additional For FBV-PEX-DE C-FBV-1 S-FBV-1 WBVS-3 WBVC 77 Ball Valves 5 GBV GBV-1 GBV-FL G4000M1 , 2 and 5psi 2 ⁄ 1 ") 4 ⁄ 3 (2" – 6") " (15 x 10, 15 x 15, 20 x 24mm), Female NPT x 8 ⁄ 5 (8" – 10") " – 2 " x ⁄ 4 ⁄ 1 3 ( " – 1") ", 8 2 ⁄ " @ 760 ft.3/hr Sizes 2" Sizes – 6" with (50 ball valves – flanged 150mm), ⁄ 4 1 3 ⁄ ( 3 " x 2 ⁄ 1 , 2 and 5psi (3.4, 13.8, 34.5 kPa). UL listed @ 5psi (34.4 kPa) 2 ⁄ ", 1 8 ⁄ 3 rated 32°F to 125°F (0°C – 52°C). CSA approved @ For assistance, contact your local authorized agent Watts or visit our website at www.watts.com " x " (15 – 20mm) NPT female connections 2 ⁄ 4 ⁄ Sizes 8" – 10" (200 – 250mm), FDA approved fused epoxy coating, with 8" Sizes – coating, epoxy fused 10" (200 – FDA approved 250mm), 1 3 " – 1" (10 – 25mm), NPT female connections and tee handle. Sizes: 2" – 6" (50 – 150mm) interior and exterior fused epoxy coating, FDA coating, epoxy fused exterior and interior 150mm) – (50 6" – 2" Sizes: 8 " @ 295 ft.3/hr., " @ 295 ft.3/hr., ⁄ 2 3 ⁄ 1 Sizes 8", 10" (200, 250mm), with 200psi manual (13.8 gear bar) operator. CWP Sizes " and 2 ⁄ 1 Sizes

ANSI Class 125 cast iron, flanged gate valve GBV-FL – GBV-FL For additional information, request literature ES-GBV. Models GBV – • Brass two-piece body construction • Available with tee handle or square handle Series GBV For additional information, request literature ES-G4000, ES-G4000-FDA or ES-G4000M1. Models Series Predator™ G4000M1 – at (60°C). 140°F bar) (13.8 CWP 200psi (non-shock) (8.6 bar) rating. steam 125psi – G4000-FDA (60°C). 140°F at (non-shock) CWP bar) (13.8 200psi handle. lever with approved, G4000M – at (60°C). 140°F bar) (13.8 CWP 200psi (non-shock) gear operator. manual • Fast operation quarter-turn • 304 Stainless steel ball and stem • Same end-to-end dimensions (ANSI B16.10) and flange dimensions (ANSI B16.1) as an (non-shock) at 140°F (60°C). – G4000M-FDA Series Series G4000M Series Series G4000M1 (3.4, 13.8, 34.5 kPa). UL listed @ 5psi (34.4 kPa). Flare Flare connections and tee handle. GBV and – GBV-FL 2-Piece, Brass Gas Ball Valves 2-Piece, 2-Piece, Full Port, Cast Iron Flanged Ball Valves 1-Piece, Brass Gas Ball Valves For additional information, request literature ES-GBV-1. Features • Blowout Proof Stem Design • One-piece Body • UL approved @ 5psi (34.4 kPa) • Approved by CSA @ • Sizes Series GBV-1 Series GBV-1 • under Standards Z21.15 IAS Tested Requirement • Capacity: •sign New Blowout Proof Stem De 5 Ball Valves 78 Brass Midi Check ValvesCheck Midi Brass • Silent operation Silent • stop back Positive • position vertical or horizontal a in Install • 6 Series • Bronze seat with Viton with seat Bronze • steeldisc,guidespringrodand 360°F.100°F;shock@@-20°F150psi toWSP(10.3bar) construction;Heavyduty stainless 600-Z3– (38ºC) @100ºF WOG. bar) (27.6 400psi Teflon • 600 601S 600, Series Sizes hammer water Prevents • operation check Silent • spring and rod guide steel Stainless • position vertical or horizontal a in Install • • Similar to Model 600 but especially designed for well pump service and other and service pump well for designed especially but 600 Model to Similar • 601S 601, 38°C) to (-29° 100°F to -20°F @ non-shock WOG bar) (27.6 400psi and (121°C), Sizes Models ValvesCheck Silent Bronze Series 6 – 6 Series Models Temperature: Maximum (82°C) 180°F • bar) (13.8 Pressure:200psi Working Maximum • Specifications • A Buna-N seat, bonded to the valve body,valve the pro to bonded seat, Buna-N A from sealing tight leak vides • ap service general HVACand for Designed pli ca • tions ICV-125-2-2-TSeries Specifications ValvesWaferCheck Iron Cast • Designed and tested according to API 594 for use between use for 594 API to according tested and Designed • • Standard ASTM A216 cast iron body with aluminum-bronze disc plates disc aluminum-bronze with body iron cast A216 ASTM Standard • springs steel stainless 316 and bearings PTFE • installation easy design, compact Lightweight, • • Silent check valve eliminates water hammer effect hammer water eliminates valve check Silent • (66ºC), @ 150ºF CWP bar) (13.8 200psi (50-300mm): 2"-12" • applications requiring tight seating tight requiring applications -40°F – +250°F (-40°C – 121°C) – (-40°C +250°F – -40°F ANSI Class 125 or 150 flanges 150 or 125 Class ANSI 1 1 ⁄ ⁄ 4 4 "- 250°F @ WSP bar) (1 15psi connections; female threaded NPT 50mm), – (8 2" – " ® 1 Sizes seat and brass disc brass and seat ⁄ 2 Sizes " (8 – 15mm) threaded connections, threaded 15mm) – (8 " 3 ⁄ 4 1 ", 1 ", ⁄ 4 " – 1" (8 – 25mm), NPT threaded female connections female threaded NPT 25mm), – (8 1" – " For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 1 ⁄ ( 2 " (20, 40mm), NPT female40mm),(20,connection;NPT" non-400psiWOG(27.6bar) 1 ⁄ 4 ® " – 1") – " disc ( 1 ⁄ 4 " – 2") – " 1 ⁄ 2 " – 1" (15 – 25mm), solder connections; solder 25mm), – (15 1" – " (2" – 12") – (2" ES-600, ES-601 or ES-600-Z3. or ES-601 ES-600, literaturerequest information, additional For request literature ES-ICVF-125. literaturerequest information, additional For requestliterature ES-ICV-125-2-2-T. Foradditional information, ICV-125-2-2-T 600 6 79 Gate / Globe / Check Valves 6 ICVF-125 ICVW-125 For additional information, information, For additional ES-ICVF-125. literature request For additional information, information, additional For ES-ICVW-125. literature request (2" – 10") (2" – 6") For assistance, contact your local authorized agent Watts or visit our website at www.watts.com

(13.8 @ 66°C).Consult factory for proper installation in vertical position 150°F.Consult factory for proper installation in 150°F.Consult vertical position Specifications Cast Iron, Silent Check Valves

• Designed for HVAC and general ap pli ca tions •ca pli Designed for and HVAC general ap • Can be installed either horizontally or vertically to provide shutoff to 200psi @ 150°F Series Series ICVW-125 • For use between ANSI Class 125 and Class 250 flanges • ASTM A-126 Class B cast iron body with B-62 bronze globe style disc and seat • 316SS conical spring • Silent check valve operation eliminates water hammer effect Specifications Flanged Cast Iron Silent Check Valves

• Designed for HVAC and general ap pli ca tions •ca pli Designed for and HVAC general ap • Can be installed either horizontally or vertically to provide shutoff to 200psi @ Series ICVF-125 • For use between ANSI Class 125 and Class 250 flanges • ASTM A-126 Class B cast iron body with B-62 bronze globe style disc and seat • 316SS conical spring • Silent check valve operation eliminates water hammer effect 80 6 Gate / Globe / Check Valves OSY Flanged Gate ValvesGate Flanged OSY • For distribution service and fire main shutoff main fire and service distribution For • MSS-SP-70 with Complies • connections flanged B16.1 ANSI • approved FM Listed, UL • valves shutoffiron cast B Class A-126 ASTM • 408-OSY-RWSeries NRS Flanged Gate ValvesGate Flanged NRS • ASTM A-126 Class B cast iron shutoff valves for water service water for valves shutoffiron cast B Class A-126 ASTM • 406 405, Series 406E – 406E facilities. disposal sewage vice, water,ser- potable distribution For water stem. Non-rising design. wedge Resilient cations. – 406-NRS-RW service. distribution water and irrigation For design. wedge – 405RW Models connections flanged B16.1 ANSI • Temperature: Maximum (60°C) 140°F • coated Epoxy • PressureRating: 200psi (13.8 bar) CWP • Specifications IBBM style, non-rising stem. non-rising style, IBBM 408-OSY-RW– Models (Buna-N) wedge Resilient • coated Epoxy • Temperature: Maximum (60°C) 140°F • CWP bar) (12.1 175psi PressureRating: • Specifications ASTM A126 Class B cast iron. Epoxy coated internally and externally and internally coated Epoxy iron. cast B Class A126 ASTM 403RT-RW– Models Temperature: Maximum (60°C) 140°F • CWP bar) (13.8 200psi PressureRating: • Specifications Ring-tite Gate ValveGate Ring-tite • Resilient wedge gate wedge Resilient • service distribution shutoff water and Irrigation • 403RT-RWSeries Sizes 2 Sizes Sizes 2" – 12" (50 – 300mm), flanged connections. Non-rising stem, resilient stem, Non-rising connections. flanged 300mm), – (50 12" – 2" Sizes Sizes 2" – 6" (50 – 150mm), ring tite connections tite ring 150mm), – (50 6" – 2" Sizes 1 ⁄ 2 Sizes 2 Sizes Sizes 2" – 12" (50 – 300mm), flanged connections. AWWA C509 specifi- C509 AWWA connections. flanged 300mm), – (50 12" – 2" Sizes " – 12" (65 – 300mm), (no 8" available) flanged connections. MSS-SP70. connections. flanged available) 8" (no 300mm), – (65 12" – " For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 1 ⁄ 2 " – 12" (65 – 300mm), flanged connections. flanged 300mm), – (65 12" – " (2" – 12") – (2" (2" – 6") – (2" (2 1 ⁄ 2 " – 12") – " request literature ES-403RT-RW.literaturerequest information, additional For request literature ES-408-OSY-RW.literaturerequest information, additional For ES-405RW,ES-406E. or ES-406-NRS-RW literaturerequest information, additional For 408-OSY-RW 403RT-RW 406E 81 Gate / Globe / Check Valves 6 411 GV WGV For additional information, request literature ES-411. For additional information, request literature ES-WGV. For additional information, request literature ES-GVS or ES-GLV. ES-GV, " – 4") 4 ⁄ 1 ( " – 3" (15 – 80mm), NPT female " – 2" (15 – 50mm), solder connections solder 50mm), – (15 2" – " 2 ⁄ 2 " – 4") ⁄ 1 1 2 ⁄ 1 ( Sizes (2" – 10") " – 2" (8 – 50mm), NPT female threaded connections, rising Sizes 4 ⁄ 1 Sizes " – 4" " – 3" (10 – 80mm), solder connections, non-rising stem. non-rising connections, solder 80mm), – (10 3" – " 4 8 ⁄ ⁄ 3 1 " – 10" Sizes 2 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com ⁄ 1 Sizes Sizes Sizes

Sizes 2" – 10" (50 – 250mm), cast iron body and disc, with Buna-N disc seat, ANSI

" – 4" (15 – 100mm), NPT female

⁄

threaded threaded connections threaded threaded connections 1 WGV (round handle) – WGVS (round handle) – WGV-X (cross handle) WGV-X – Models 411 – B16.1 flange connections, epoxy painted external surfaces Specifications • CWP bar) (13.8 175psi Rating: Pressure • 180°F (82°C) Maximum Temperature: • ASTM A-126 Class B cast iron body • Complies with MSS-SP-71 • For water service on fire protection systems • UL/FM Listed, 2 Series Series 411 Class 125, Iron Swing Check Valves Brass Gate Valves

• For shutoff service • Non-rising stem (NRS) Series WGV • Models • • WOG bar) (13.8 200psi Rating: Pressure • 180°F (82°C) Maximum Temperature: Specifications • Bronze Bronze Shutoff Valves GLV globe valves – GLV (8 – 100mm), NPT female threaded connections, – non-rising stem valves gate GVS Models GV gate valves – Specifications • Rating: Pressure 125psi (8.6 bar) WSP/200psi (13.8 bar) WOG • 353°F (178°C) Maximum Temperature: • For general steam, service oil on or water, compressed gas Series GV, GVS, GLV GVS, GLV Series GV, stem, bronze disc. 82 6 Gate / Globe / Check Valves • For one-way flow of water and steam applications steam and water of flow one-way For • WCV Series Brass Swing Check ValvesCheck Swing Brass • Non-rising stem (NRS) stem Non-rising • applications shutoff general For • SeriesWGVC Brass Gate ValvesGate Brass (60°C). PressureNBR. ratingis 200psiMaximumWOG.(13.8bar)temperature material 140°F WCV – WCV Models WCV-2– WOG. bar) (13.8 WSP/200psi WCVS – WCVS WOG. bar) (13.8 WSP/200psi bar) (8.6 125psi (15 – 20mm), compression ends compression 20mm), – (15 Specifications WGVC – WGVC Models Temperature: Maximum (60°C) 140°F • • WGVC PressureRating: 125psi (8.6 bar) WOG Sizes Sizes Sizes Sizes 1 ⁄ 2 1 1 " – 4" (15 – 100mm), NPT threaded female connections. Pressurerating connections. female threaded NPT 100mm), – (15 4" – " 1 ⁄ ⁄ 2 ⁄ 2 2 " – 2" (15 – 50mm), solder connections. Pressure rating 125psi (8.6 bar) (8.6 125psi Pressurerating connections. solder 50mm), – (15 2" – " ", " – 2" (15 – 50mm), NPT threaded female connections. Rubber seat Rubber connections. female threaded NPT 50mm), – (15 2" – " 3 ⁄ For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 4 " ( 1 ⁄ 2 ( " – 4") – " 1 ⁄ 2 " –" 3 ⁄ 4 ") literature ES-WCV.literature request information, additional For request literature ES-WGVC. literaturerequest information, additional For WGVC WCV 83 Gate / Globe / Check Valves 6 CVY For additional information, request literature ES-CVS or ES-CVYS. ES-CVY, ES-CV, " – 4") 8 ⁄ 3 ( " – 3" (15 " – – (15 3" connections end solder 80mm), " – 4" (10 – 100mm), NPT threaded female 2 ⁄ 8 ⁄ 1 3 " – 2" (15 – 50mm), solder end connections end solder – (15 50mm), 2" " – " – 2" (10 – 50mm), NPT female connections 2 ⁄ 8 ⁄ 1 3 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com Wye pattern – Sizes: Wye pattern – Sizes: 90° straight pattern – Sizes: – Sizes: pattern straight 90°

90° straight pattern – Sizes: connections

CVYS – CV – Specifications • Rating: Pressure 125psi (8.6 bar) WSP and 200psi (13.8 bar) WOG Models CVS – CVS CVY –

• For one way steam, flow gas on or water, oil lines • Used to prevent reverse fluid flow Series CV, CVY Series CV, Bronze Bronze Swing Check Valves 84 6 Gate / Globe / Check Valves (100mm) has (100mm) 777 – 777 Models 3 Sizes (8.6 WSP bar) 125psi and WOG 300psi bar) 777S (20.7 & 777 4" bar); (27.6 WOG Pressure:400psi Working Maximum Specifications mesh strainer screen. Size 3" (80mm) has (80mm) 3" Size screen. strainer mesh use on steam or gas. or steam on use for Not (60°C). 140°F @ bar) (13.8 required.Waterpressure200psi is appearance metic cos- construction/clean non-corrosive a where service liquid for Ideal contact. water/food potable for interior/exterior.suitable on approved coating FDA epoxy fused heat applied – 77F-DI-FDA-125 (66°C). 150°F @ bar) (34.4 WOG 500psi (208°C), 406°F @ WSP bar) (17.2 250psi (non-shock) – 77F-DI-250 Type16293 MIL-S II. with shock) 125psi (8.6 bar) WSP @ 353°F (178°C), 200psi (13.8 bar) WOG @ 210°F (99°C) comply 250 and 125 Class ANSI • Iron Body, Flanged End, Wye-pattern Strainers Wye-pattern Body,IronEnd, Flanged Bronze Wye-type Strainers Wye-type Bronze • For liquid or steam service to protect valves or valves protect to service steam or liquid For • 777 Series 77F-DI-125– Models similar and preventers backflow valves, check protect to service steam and liquid For • 77F-DI-FDA-125 77F-DI-250, 77F-DI-125, Series • Install strainers up stream of equipment that need protection from scale, rust, dirt, etc dirt, rust, scale, fromprotection need that equipment of stream up strainers Install • service steam or liquid For • 77S-M1 Series Cast Iron Wye-pattern Strainers Wye-pattern Iron Cast request literature F-C77. literaturerequest information, additional For (66°C) 150°F @ bar) (27.6 WOG 400psi (208°C), 406°F @ bar) (17.2 WSP 250psi (non-shock) PressureRating: Specifications ⁄ 64 controls from foreign matter.foreignfrom controls " (1mm) perforated screen, and 4" and screen, perforated (1mm) " similar controls from foreign matter foreignfrom controls similar 1 solid retainer cap for strainer screen. strainer for cap retainer solid ⁄ 4 " – 2 – " 1 ⁄ 1 2 castiron body, ANSI Class 125 flanged connections. Pressure rating of (non- ⁄ " (8 – 65mm) have a 20 a have 65mm) – (8 " ductile iron body, ANSI Class 250 flanged connections. Pressure ratings of Pressureratings connections. flanged body,250 iron Class ductile ANSI 8 " (3mm) perforated screen perforated (3mm) " Class 125 flanged connections. Double coated, electrostatically coated, Double connections. flanged 125 Class For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For ( 1 ⁄ 4 " – 4") – " ( 1 ⁄ 4 " – 3") – " (2" – 12") – (2" plug (plug not included) - Sizes - included) not (plug plug – S777S connections end solder 50mm), – (15 Sizes: Sizes plug. closure and cap retainer tapped with – 777SI connections end solder 50mm), – (15 plug (plug not furnished) –Sizes furnished) not (plug plug – 777S connections inlet/outlet threaded S777 – S777 connections threaded female NPT (15-100mm), mesh strainer screen; 3" size has has size 3" screen; strainer mesh same as 77SI. as same pressuresWorkingscreen. perforated Sizes Sizes connections. inlet/outlet female threaded 77S-M1 Models 3 1 1 ⁄ ⁄ 8 ⁄ 4 4 solid retainer cap – Sizes – cap retainer solid " – 3" (10 – 80mm) – (10 3" – " " – 2 – " " – 4" (8 – 100mm) NPT female NPT 100mm) – (8 4" – " wye type, threaded connections, threaded type, wye retainer cap tapped for closure for tapped cap retainer – Sizes: – retainer cap tapped for closure for tapped cap retainer 1 ⁄ 2 " (8 – 65mm) have 20 have 65mm) – (8 " 1 ⁄ 4 " – 3" (8 – 80mm), NPT 80mm), – (8 3" – " 1 1 ⁄ ⁄ 2 2 1 " – 2" – " " – 4" – " ⁄ 2 3 " – 2" – " ⁄ 64 " ES-77F-DI-125, ES-77F-DI-250 or F-C77. or ES-77F-DI-250 ES-77F-DI-125, literaturerequest information, additional For B16.1.) (ANSI 250 and 125 Class standard, flange iron cast American the to conform flanges end of Flanges: End Outlet: Blow-Off outlet. blow-off the to attached plug closure the removing or valve a opening by Note: ES-777, ES-777SI or ES-S777. or ES-777SI ES-777, additionalFor information, request literature (15 – 50mm) – (15 cap and closure plug. Sizes plug. closure and cap WOG/125WSP400 tappedwithretainer – S777SI screens. 77SI – 77SI Sizes connections. female threaded strainer screen. Size 2 Size screen. strainer (80mm) have (80mm) Self-cleaning can be accomplished be can Self-cleaning 1 ⁄ 4 Sizes: " – 2" (8 – 50mm) have 20 mesh 20 have 50mm) – (8 2" – " wye type, solder connections, solder type, wye The dimensions and drilling and dimensions The 3 1 ⁄ ⁄ 64 4 " – 3" (8 – 80mm), NPT 80mm), – (8 3" – " " (1mm) perforated (1mm) " Tappedfemale. NPT 1 ⁄ 2 " (65mm) and 3" and (65mm) " 1 77F-DI-FDA ⁄ 2 " – 2" – " 77S 777 85 Strainers 7 17 27 745 77F-BI For additional information, request ES-77F-BI. literature For additional information, request literature ES-27. For additional information, request literature ES-745. For optional screens, consult factory. For additional information, request literature ES-17. " (3mm) for 4" – 8". The 77F- 8 ⁄ 1 ") (2" – 8") 2 ⁄ " (1mm) for 2" – 3" and 1 64 ⁄ ") 3 4 ⁄ 3 " – 1") " – ( 4 8 ⁄ ⁄ 3 1 ( ( For assistance, contact your local authorized agent Watts or visit our website at www.watts.com " (3 – 15mm), NPT female threaded connections. Standard screen is 40 screen Standard " connections. (3 – NPT threaded 15mm), female 2 ⁄ 1 " (20mm), NPT female connections, 80 mesh strainer screen. 250psi CWP ", 1" (20, 25mm), union end, NPT threaded female connections, #40 mesh " " – 4 4 8 ⁄ ⁄ ⁄ 3 3 1

Size Sizes Sizes Sizes

Pressure Rating: Pressure 250psi (17.2 bar) WOG @ 180°F (82°C) removable knurled retainer cap desirable systems and similar applications 45° Wye-pattern Bronze Strainers Bronze Bronze In-line Single Union End Strainers strainer screen standard (17.2 bar) @ 210°F (99°C), and 50psi WSP (345 kPa) @ 280°F (138°C). Bronze, Bronze, Flanged, Wye-pattern Strainers Specifications • 17 – • For quick removal of equipment for cleaning, or where feed line separation is required Models Series 17 Models 745 – • For applications where scheduled cleaning of the strainer screen makes a hand Model 745 Models 27 – • For beverage dispensers, ice cube machines, dental equipment, instrument control Series 27 Specifications Sizes 2" – 12" (50 – 300mm), bronze screen ASTM cover B-62 and body, plug (furnished), and 304SS screen openings of • For liquid or steam service Series Series 77F-BI BI is U.L. listed. Flanges in accordance with ANSI B16.1, Class 125. Working of pressures 150psi WSP (10.3 bar) @ 406°F (208°C), 225psi WOG (15.5 bar) @ 150°F (66°C). bar). (17.2 CWP 250psi pressure Maximum factory. consult available, types mesh other mesh, Bronze Bronze Compact Strainers Water Vee-pattern 86 7 Strainers P777-100 – Models plastic acetal approved NSF • CWP 300psi PressureRating: • Specifications Plastic Body Wye Strainers Wye Body Plastic • 45° acetal plastic wye strainers for OEM applications requiring an inexpensive cor- inexpensive an requiring applications OEM for strainers wye plastic acetal 45° • P777-100 Series WOG (102 bar) @ 100°F (38°C). 100°F @ bar) (102 WOG 3 Sizes Specifications weld socket or NPT Threaded • service steam or liquid For • 88CSI Series (furnished), non-asbestos cap gasket, and 304SS screens of screens 304SS and gasket, cap non-asbestos (furnished), Cast Steel, Wye-Pattern Strainers Wye-Pattern Steel, Cast (49.6 bar) @ 100°F (38°C). 100°F @ bar) (49.6 WOG 720psi (204°C), 400°F @ bar) (20.7 WSP 300psi pressuresof Working 80mm). – (65 Sizes and 304SS screens of screens 304SS and Cast Steel, Flanged, Wye-pattern Strainers Wye-pattern Flanged, Steel, Cast Specifications weld socket or NPT Threaded • service steam or liquid For • 87SI Series Sizes Specifications service steam or liquid For • 77F-CSI Series (10.3 bar) @ 400°F (204°C), 285psi WOG (19.6 bar) @ 100°F (38°C). 100°F @ bar) (19.6 WOG 285psi (204°C), 400°F @ bar) (10.3 WSP 150psi pressuresof Working 150. Class B16.1, ANSI with accordance in Flanges for 2" – 3" (50 – 80mm) and 80mm) – (50 3" – 2" for plug (furnished), PTFE gasket, and 304SS screens of screens 304SS and gasket, PTFE (furnished), plug Stainless Steel, Wye-pattern Strainers Wye-pattern Steel, Stainless ⁄ 64 rosion resistant material resistantrosion " (1mm) for 2". Working pressures of 600psi WSP (41.3 bar) @ 489°F (254°C), 1480psi (254°C), 489°F @ bar) (41.3 WSP 600psi pressuresof Working 2". for (1mm) " 1 1 1 ⁄ 2 ⁄ ⁄ 2 2 " – 2" (15 – 50mm), ASTM A-216 WCB body, ASTM A-105 retainer cap and plug and cap body,retainer WCB A-105 A-216 ASTM ASTM 50mm), – (15 2" – " " – 2" (15 – 50mm), ASTM A-351 316SS body and retainer cap, PTFE cap gasket, cap PTFE cap, retainer and body 316SS A-351 ASTM 50mm), – (15 2" – " " – 6" (15 – 150mm), ASTM A-216 WCB body and screen cover,A-105 screen ASTM and body WCB A-216 ASTM 150mm), – (15 6" – " Sizes 1 ⁄ 4 ", For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 3 1 ⁄ ⁄ 8 32 " (8, 10mm) has 100has 10mm) mesh (8, " screen, NPT female connections " (.8mm) for (.8mm) " 1 ⁄ 8 " (3mm) for 4" – 6" (100 – 150mm). – (100 6" – 4" for (3mm) " ( 1 ⁄ 2 ( " – 3") – " 1 ⁄ 2 1 ⁄ " – 2") – " 2 " – 2" (15 – 50mm) and 50mm) – (15 2" – " ( 1 ⁄ 2 ( 1 " – 6") – " ⁄ 4 ", 3 ⁄ 8 ") 1 ⁄ 32 " (.8mm) for (.8mm) " 1 ⁄ 3 32 ⁄ 64 " (.8mm) for (.8mm) " " (1mm) for 2 for (1mm) " 1 ⁄ 2 "-1 1 ⁄ 2 1 ", ⁄ 1 2 ⁄ "-1 2 3 " – 3" – " ⁄ 64 1 " (1mm) " ⁄ 2 " and " literature ES-P777. literature request information, additional For request literature ES-88CSI. literaturerequest information, additional For request literature ES-87SI. literaturerequest information, additional For – 87SI-SW – 87SI-T request literature ES-77F-CSI. literaturerequest information, additional For Threaded NPT Threaded Socket Weld Socket P777-100 77F-CSI 88CSI 87SI 87 Strainers 7 88S 77G-SS 77F-CSSI For additional information, request literature ES-77F/77G. For additional information, request literature ES-77F-CSSI. For additional information, request literature ES-88S. " 16 ⁄ 1 ", 2 ⁄ 1 " – 1 2 ⁄ 1 " – 12") 2 ⁄ " (.8mm) for 1 32 ⁄ 1 (2 " – 6") 2 ⁄ 1 ( " (3mm) for 4" – 6" (100 – 150mm). 8 ⁄ 1 " – 2") 4 ⁄ 1 ( For assistance, contact your local authorized agent Watts or visit our website at www.watts.com " – 12" (65-300mm) 2 ⁄ 1 "- 6" (15 – 150mm), ASTM A-351 316SS body ASTM and A-182 screen cover, "- 2" (8-50mm), NPT threaded female connections, perforated strainer screen 2 4

⁄ ⁄ 1 1

" (1mm) for 2" – 3" (50 – 80mm), and 489°F (254°C) 64 ⁄ (2mm). All 316SS construction. 316SS plug (furnished), PTFE gasket, and 304SS screens of Stainless Steel, Wye-pattern Strainers Stainless Steel Wye-pattern Strainers, Flanged and Grooved

Specifications • Sizes 2 Series 77F-SS, 77G-SS • Light weight, 304SS corrosion resistant alternative to cast iron strainers • For liquid service • Complies with NSF 61 and FDA standards • Blow off outlet tapped NPT female Specifications Sizes 3 • For liquid or steam service Sizes Series 77F-CSSI Specifications • For liquid and steam service to protect mechanical equipment from debris • ANSI Class 600: Liquids 1440psi (99 bar) @ 100°F (38°C), Steam 600psi (41.3 bar) @ Series Series 88S Stainless Stainless Steel Wye-pattern Strainers • Rating: Pressure 200psi (13.8 bar) WOG (nonshock) at 150°F (66°C) • ANSI B16.1 Class 125 flange dimensions and drilling Flanges in accordance with ANSI B16.1 Class 150. Working of pressures 150psi WSP (10.3 bar) @ 400°F (204°C), 275psi WOG (18.9 bar) @ 100°F (38°C). 88 7 Strainers for 2" – 3" (50 – 80mm), 80mm), – (50 3" – 2" for Class 125. Class B16.1 ANSI with accordance in Flanges 300mm). – (100 12" – 4" 304SS perforated screens of screens perforated 304SS and gasket Non-asbestos (furnished). plug body,iron cast cover,screenB Class and A-126 ASTM 300mm), – (50 12" – 2" Sizes Specifications UL/FM Fire Service Steel Strainer Steel Service Fire UL/FM For additional information, request literature ES-97FB/GB. literaturerequest information, additional For with flange x groove or groove x groove strainer,flange, steel x coated flange Epoxy • Specifications that clogging against system protect to system spray water a with conjunction in Used • 97FB-FSFE Series service steam and liquid For • 97FB-CI Series Cast Iron, Simplex Basket Strainers Basket Simplex Iron, Cast • Body material Corrosion resistant fusion-bonded epoxy-lined and coated steel coated and epoxy-lined fusion-bonded resistantCorrosion material Body • Temperature(60°C) 140°F Range: • bar) (12.1 Pressure:175psi Working Maximum • 250mm) and 200 150, 100, (80, 10" and 8" 6", 4", 3", Sizes • element strainer steel stainless 304 • • Flanges AWWA Class "D" Grooves AWWA C606 AWWAGrooves "D" Class AWWA Flanges • • For liquid service only service liquid For • • For liquid service only service liquid For • Cast Iron, Duplex Basket Strainers Basket Duplex Iron, Cast and304SS perforated screens of andplug (furnished). Non-asbestos gasket 126,Class Bcast iron body, screen cover, Sizes5" –14" (125 –350mm), ASTM A- Specifications 97FD-CIB Series 304SS. arescreens strainer gasketmaterialsTheperforatedPTFE.All is 316SS. cast CF8M Grade A-351 ASTM Body,of constructed cover,are plug and Specifications 97FB-CSSI Series Class 125. Class B16.1 ANSI with accordance in Flanges Cast 316SS Flanged Basket Strainers Basket Flanged 316SS Cast multiple cleanouts multiple material foreign trap to Designed heads. sprinkler the of opening discharge small the fouling particles by caused be can For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 1 ⁄ 8 " (3mm) for (3mm) " 3 ⁄ 64 " (1mm) " 1 ⁄ 8 "(3mm). 1 ⁄ 8 " diameter or larger or diameter " (2" – 12") – (2" (5" – 14") – (5" (13.8 bar) WOG bar) (13.8 – 97FB-CIB WorkingPressures: – 97FB-CIB Models (2" – 12") – (2" 97FD-CIB – 97FD-CIB WorkingPressures: – 97FD-CIB Models – 97FD-CSSIB WorkingPressures: 97FD-CSSIB – Models (3" – 10") – (3" 125psi (8.6 bar) WSP/ 200psi WSP/ bar) (8.6 125psi cover Bolted 200psi (13.8 bar) WOG bar) (13.8 200psi cover Bolted Bolted screen retainer cover 275psi (13.8 bar) WOG bar) (13.8 275psi request literature F-C77. literaturerequest information, additional For F-C77. literaturerequest information, additional For ES-97FB-CI. literaturerequest information, additional For 97FB-CIB 97FB-FSFE 97FB-CSSIB 97FD-CIB 89 Strainers 7 Series CSM-61 (1⁄2" – 3") Flow Measurement Valves • Used for hot or chilled water units for system balancing/flow measurement

Models Applications CSM-61-M1 CSM-61-M1-T – bronze body – Sizes • Fan coil units 1⁄2" – 3" (15 – 80mm), NPT female • Unit ventilators threaded inlet/outlet • Convectors • Water source heat pumps CSM-61-M1-S – bronze body – Sizes 1⁄2", • Small residential boilers/circuits • Finned radiation 3⁄4", 1", 21⁄2" (15, 20, 25, 65mm), solder connections • Reheat coils For additional information, request literature ES-CSM-61. CSM-61-M2-S – bronze body – Sizes 11⁄4", • Unit heaters 11⁄2" and 2" (32, 40, 50mm), • Small domestic hot water lines solder connections

Series CSM-81 (21⁄2" – 8") Flow Measurement Valves • Used for hot or chilled water units for system balancing/flow measurement Models CSM-81-F – semi-steel body – Size • Finned radiation 21⁄2" – 8" (65 – 200mm), flanged connections. • Reheat coils CSM-81-F • Unit heaters Applications • Small domestic hot water lines

8 • Fan coil units • Convectors • Unit ventilators • Small residential boilers/circuits For additional information, • Water source heat pumps request literature ES-CSM-81. Balancing & Flow Measurement Flow & Balancing

Series CSM-91 (21⁄2" – 12") Large Flow Measurement Valves • For medium and large flow rate HVAC systems and pump package/cooling towers • Easy installation and positive shutoff for servicing equipment • Incorporates a micrometer type handwheel adjustment • Tamper-proof memory stop CSM-91 * Note: Series CSM-91 valves are shipped Models as a straight pattern from the factory. To 1 convert to an angle pattern, refer to IS- CSM-91* – Sizes 2 ⁄2" – 12" (65 – 300mm), grooved end connections. Ductile iron body ASTM A536 GR65-45-12. Maximum working pressure 375psi (25.8 bar). Maximum Sheet shipped with valve. temperature 230°F (110°C). For additional information, request literature ES-CSM-91.

90 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com Series TDV (21⁄2" – 12") Combination Balancing, Shutoff, and Check Valve for Single, Double, and Vertical In-line Pump Applications • Combines functions of a positive hand-tight shutoff valve, check valve and flow control valve into one versatile package TDV Models TDV – Sizes 21⁄2" – 12" (65 – 300mm), grooved end connections. Ductile iron body. Anti-rotation lugs on inlet/outlet of the body • Grooved ends: Maximum working pressure 375psi (25.8 bar). Maximum temperature 230°F (110°C)

Note: Series TDV valves are shipped as a straight pattern from the factory. To convert to an angle pattern, refer to instruction sheet shipped with valve. For additional information, request literature ES-TDV.

Series PG Pressure Differential Gauges for Testing Flow Measurement Valves/Orifices for Watts Series CSM/FMO. • Used to check differential pressures across system components Models PG-8 PG-2 – 0 – 16 ft. of water (0 – 4,876.8 kgs./m2)

PG-3 – 0 – 35 ft. of water (0-10,668 kgs./m2) 8 PG-4 – 0 – 100 in. of water (0 – 2,540 kgs./m2) PG-5 – 0 – 200 in. of water (0 – 5,080 kgs./m2)

PG-6 – 0 – 50 in. of water (0 – 1,270 kgs./m2) For additional information, PG-8 – 0 – 135 in. of water (0 – 3,429 kgs./m2) request literature ES-PG-2-6, ES-PG-8. Balancing & Flow Measurement

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 91 Series GBF-H, GBF-G (21⁄2" – 10") Grooved End Butterfly Valves • For positive shutoff service on commercial, irrigation, HVAC and industrial applications • Ductile iron body • Grooved end designed to ANSI/AWWA C-606 Rigid Grooved Specification

Specifications • Maximum Operating Temperature: 275°F (135°F) • Maximum Operating Pressure: 175psi (12.1 bar) CWP GBF-G Models • GBF-H with lever handle • GBF-G with gear operator

For additional information, request literature ES-GBF. GBF-H

Bare Stem E SIZE (DN) DIMENSIONS WEIGHT AB CDE D in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.

21⁄2 65 37⁄8 98 27⁄8 73 29⁄16 65 4 102 15⁄8 41 8.51 3.87 3 80 37⁄8 98 39⁄16 90 215⁄16 75 45⁄16 109 15⁄8 41 10.08 4.58 4 100 49⁄16 116 41⁄2 115 35⁄8 92 5 128 15⁄8 41 15.93 7.24 B 6 150 57⁄8 149 65⁄8 169 51⁄4 133 515⁄16 151 21⁄8 54 30.34 13.79 C 8 200 51⁄4 134 813⁄16 223 61⁄2 166 75⁄8 194 215⁄16 58 46.18 20.99

9 10 250 65⁄16 160 1013⁄16 274 81⁄2 216 75⁄8 194 23⁄16 56 75.22 34.19

A Butterfly ValvesButterfly

Gear Operator SIZE (DN) DIMENSIONS WEIGHT H L GEAR RATIO ADH L in. mm in. mm in. mm in. mm in. mm lbs. kgs.

21⁄2 65 24:1 53⁄4 146 4 102 21⁄2 64 71⁄2 191 11.06 24.38 3 80 24:1 53⁄4 146 4 102 21⁄2 64 71⁄2 191 11.06 24.38 A 4 100 24:1 53⁄4 146 4 102 21⁄2 64 71⁄2 191 11.06 24.38 6 150 24:1 53⁄4 146 4 102 21⁄2 64 71⁄2 191 11.06 24.38 D 8 200 30:1 12 305 6 152 3 76 101⁄2 267 23.90 52.69 10 250 30:1 12 305 6 152 3 76 101⁄2 267 23.90 52.69

Handle Length SIZE (DN) WEIGHT F F in. mm in. mm lbs. kgs.

21⁄2 65 109⁄16 268 1.58 3.48 3 80 109⁄16 268 1.58 3.48 4 100 109⁄16 268 1.58 3.48 6 150 143⁄16 360 1.58 3.48 8 200 151⁄2 394 3.64 8.02 10 250 151⁄2 394 3.64 8.02

92 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com Series DBF (2" – 12"), BF (2" – 24") Butterfly Valves Full Lug Model • For positive shutoff service on commercial, irrigation, HVAC and industrial applications

Specifications *DBF – Sizes 2" – 12" (50 – 300mm), pressure 200psi (13.8 bar) WOG BF – Sizes 2" – 24" (50 – 600mm), pressure 200psi (13.8 bar) WOG for 2" – 12" (50 – 300mm) and 150psi (10.3 bar) for 14" – 24" (350 – 600mm) Sample Ordering Number: 10-DBF-03-121-1G 10 = 10-inch (250mm) size; DBF-03 = full lug style butterfly valve; 1 = ductile iron; 2 = aluminum bronze disc; 1 = 416SS shaft; 1 = EPDM seat; and G = gear operator Designation Definitions: Add the appropriate designations required. DBF for sizes: 2" – 12" (50 – 300mm) BF for sizes: 2" – 24" (50 – 600mm) Wafer Model

Style Seat Features 03 - Full lug 1 - EPDM§ Temperature 5°F – 248°F • Full lug and with lifting lug design 04 - Wafer (-15°C – 120°C) • Wafer style with lifting lug design 2 - Buna-N Temperature -14°F – 176°F Body • Ductile iron body, 416 stainless (-10°C – 80°C) 1 - Ductile Iron (ASTM-A-536) steel shaft 3 - Viton -4°F – 302°F (-20°C – 150°C) • 5211 ISO mounting pad for 10-posi- Disc §Note: Do not use EPDM when hydro- ton lever gear operator, or actuator 1 - Ductile Iron (ASTM-A126) carbons are present. • Extended neck for 2" (50mm) 2 - Aluminum Bronze (ASTM-A296) Operator of insulation 3 - 316 Stainless Steel (ASTM-A351) 0 – Bare shaft (no handle) • Pinned disc G** - Gear operator Shaft • Dead-end service rated lug style 1 - 416 Stainless Steel *(316SS shaft on 5 – Lever handle (10-position), Sizes: 2" 316SS disc models) – 12" (50 – 300mm) only For additional information, 9 P** – Positioning/locking kit with handle, request literature ES-DBF or ES-BF. Sizes: 2" – 12" (50 – 300mm) only

Standards For use with ANSI Class 125 or 150 flanges. Complies with API 609 and MSS-SP-67

Notes: Butterfly Valves *DBF series butterfly valves use domestic and foreign components that have been assembled and tested in the U.S.A. **Kits for suffix (G) gear operator & (P) positioning/locking service with handle are available. Gear Operators – High mechanical efficiency reduces the required input effort. Two self- locking adjusting screws give a ± 5° adjustment at end of 90° travel. For additional information, request literature F-P/E-AC.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 93 G

SIZE DIMENSIONS (APPROX.) TAPPED LUG DATA †WEIGHT (DN) AG N (Bolt) (03) Full Lug (04) Wafer in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs.

2 50 103⁄4 273 31⁄16 77 5⁄8-11UNCx11⁄4 16x32 8453 A 21⁄2 65 115⁄8 295 31⁄16 77 5⁄8-11UNCx13⁄8 16x35 10 574 N 3 80 121⁄8 308 31⁄16 77 5⁄8-11UNCx13⁄8 16x35 10 574 4 100 135⁄8 346 35⁄8 92 5⁄8-11UNCx11⁄2 16x38 17 8 11 5 5 125 145⁄8 371 35⁄8 92 3⁄4-11UNCx13⁄4 19x44 23 11 16 8 6 150 155⁄8 397 35⁄8 92 3⁄4-11UNCx13⁄4 19x44 29 14 19 9 8 200 187⁄8 479 41⁄2 115 3⁄4-11UNCx21⁄8 19x54 39 18 30 14 10 250 211⁄4 540 41⁄2 115 7⁄8-11UNCx21⁄4 22x57 61 28 45 21 12 300 245⁄8 625 51⁄2 140 7⁄8-11UNCx21⁄4 22x57 113 52 73 34 14 350 263⁄4 679 51⁄2 140 1-8UNCx21⁄4 25x57 154 70 97 44 16 400 30 762 73⁄4 197 1-8UNCx33⁄8 25x86 200 91 138 63 18 450 311⁄2 800 73⁄4 197 11⁄8-7UNCx4 29x102 272 124 182 83 20 500 355⁄8 905 73⁄4 197 11⁄8-7UNCx5 29x127 396 180 260 118 24 600 43 1092 107⁄8 276 11⁄4-7UNCx53⁄4 32x146 610 277 465 211

† Weights are for valves with stainless steel discs. Weights for 2" – 12" have 10- position lever handles; 14" – 24" with bare stem For additional dimensional data, request literature F-CDBF. 9

Butterfly Valve Butterfly ValvesButterfly Positioning/Locking Kit Standard Lever Handle/Latch Plate Gear Operator

SIZE (DN) GEAR OPERATOR POSITIONING/LOCKING CHAINWHEELS in. mm Kit No. Kit No. Kit No. Chain 2" Sq. Nut 2 50 GA-1-M3 #1 POS-LOCK-M2 #2 BCWK #2 BCWC OPN-BFG 21⁄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

Chain Wheel Kits attach to gear actuator handwheel. 2" (50mm) nuts are installed on gear operator shafts. To operate Watts’ butterfly valves with 2" (50mm) square nut, a gear operator must be used by removing gear handwheel and installing 2" (50mm) nut on gear shaft. Valve should be installed in line such that gear shaft is vertical for 2" (50mm) nut operation.

94 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com • Maximum Working Pressure:100psi Working Maximum • Specifications • Boiler fill valve set at 15psi (103.4 kPa) (103.4 15psi at set valve fill Boiler • Temperature: Maximum (100°C) 212°F • for Hot WaterBoilers Hot for ValveFill and Preventer Backflow Combination • Used on boiler supply feed lines to provide make-up water to the boiler and prevent and boiler the to water make-up provide to lines feed supply boiler on Used • 911 Series • An assembly of Watts 9D Backflow Preventer and 1156F feed water pressureregulator water feed 1156F and Preventer Backflow Watts9D of assembly An • • Maximum Temperature: Maximum (100°C) 212°F • Pressure:100psi Working Maximum • regulators water Feed Specifications maintenance of ease for construction unitized Unique • performance capacity Highest • system the to water up make provide to lines feed boiler on Used • 1156F,Series 1450F for Hot WaterBoilers Hot for Controls Dual and WaterPressureRegulators Feed MODEL REGULATORSTRAINER AND VALVESTRAINER,REGULATORRELIEF AND VALVEREGULATORRELIEF – AND CONTROLS DUAL TB1156F* B1156F* T1156F N256* SB1156F* S1156F 1156F-A 1156F CAPACITYHIGH WATERFEED REGULATORS MODEL T156B* T145B* T1450F B911S B911T 911S 911T S1450F 1450F *Bronze Body *Bronze (68.9 – 172.4 kPa) 172.4 – (68.9 25psi – 10 range Adjustable kPa) (689.5 backflow when supply pressure falls below system pressuresystem below pressurefalls supply when backflow (689.5 kPa) (689.5 n mi.m n mls kgs. lbs. mm in. mm in. mm in. 1 1 1 1 ⁄ ⁄ ⁄ ⁄ 2 2 2 2 SIZE (DN) SIZE For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For n mi.m n mls kgs. lbs. mm in. mm in. mm in. 1 1 1 1 1 3 1 1 1 1 1 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 2 2 2 2 2 4 2 2 2 2 2 2 2 SIZE (DN) SIZE 58 8 8 8 15 15 15 15 ( 1 ⁄ 2 54106 5 100 8 178 4 15 6 7 15 7 100 6 15 15 4 15 4 4 20 3 15 4 15 4 15 3 15 3 15 15 15 ") 1 1 1 1 ⁄ ⁄ ⁄ ⁄ 2 2 2 2 1 3 1 1 3 1 1 1 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 2 8 2 8 8 2 8 4 2 2 AB DIMENSIONS (APPROX.) DIMENSIONS A request literature ES-1156 or ES-1450F.or ES-1156 literaturerequest information, additional For Regulatorset at 15psi (103.4 kPa), adjust- • 1 5 5 5 5 216 216 216 216 request literature ES-911. literaturerequest information, additional For – (S) (T) B911 – 911S – 911T Models DIMENSIONS (APPROX.) DIMENSIONS ment range 10-25psi (68.9-172.4 kPa) 1 5 216 5 5 184 165 0 5 5 105 5 108 5 105 108 95 89 5 5 89 89 ( 1 ⁄ NPT x NPT connections NPT x NPT solder x NPT connections NPT x solder 2 ") 1 1 1 1 ⁄ ⁄ ⁄ ⁄ 4 4 4 4 3 3 3 3 3 3 3 3 3 3 3 3 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ all bronze construction bronze all 8 8 4 8 8 8 8 8 8 8 8 8 8 B 3 . 1.9 1.9 1.9 4.2 1.9 4.2 4.2 133 4.2 133 133 133 3 . 1.0 1.0 2.3 0.95 2.2 0.95 2.1 137 2.1 137 146 137 3 . 1.1 2.5 1.5 3.3 137 1.6 1.5 3.5 1.5 162 3.3 3.3 1.6 137 1.0 137 1.0 3.5 137 1.0 2.3 2.2 162 2.1 137 137 137 WEIGHT WEIGHT Size • • High capacity fill valve for quick system quick for valve fill capacity High • accessibility service Easy • installation of ease for Pre-assembled • Features relief valve. Set @ 30psi @ Set valve. relief diaphragm body iron rugged and 1156F – 1450F Series inlet threaded – TB1156F inlet solder – SB1156F inletand outlet B1156– T1156F– – S1156F tank expansion of installation for 1156F – 1156F outlet and – 1156F/1156F Models • Iron and bronze construction bronze and Iron • strainer and check Built-in • Highcapacity fast fill andpurge capability • Features filling and purging and filling 1 ⁄ 2 " x " bronzebody with NPT threaded A union solder inlet solder union unionthreaded inlet 1 1 ⁄ ⁄ bronze body with union with body bronze 2 bronze body with union with body bronze 2 " female bottom connection bottom female " " (15 x 15mm) x (15 " A NPT threaded inlet threaded NPT A combines features of features combines A A B S1156F B 911 95 Hydronics / Steam Heating Products 10 ETA ET-RA Primer coated Primer coated Heavy duty Butyl Heavy duty Butyl Carbon steel Carbon steel Construction Shell: Bladder: Exterior: information, additional For ES-ET-RA. literature request Construction Shell: Bladder: Exterior: For additional information, request literature ES-ETA. Features • ASME Section VIII Code Construction • Removable Butyl Bladder • Precharged to 12psi (Field Adjustable) Features • ASME Section VIII Construction • Heavy Duty Butyl Bladder • Precharged to 12psi (Field Adjustable) For assistance, contact your local authorized agent Watts or visit our website at www.watts.com

cooling systems (8.5 bar). to (83 12psi kPa). Precharged (115°C). through ETA 60: 150psi through ETA (10 80 bar). ETA 240: 125psi through ETA (8.5 bar) Precharged to 12psi (83 kPa) cooling systems • ASME removable bladder type pre-charged expansion tank • Designed to absorb the expansion forces and control the in pressure heating and Series ET-RA 35 – ET-RA 2000 35 – ET-RA Series ET-RA ASME Pressurized Expansion Tanks for Heating and Cooling Systems • 240°F Temperature: Design Maximum *200 and 250psig available. Specifications • Maximum Design 125psig* Pressure: Specifications • Maximum 15 Design ETA Pressure: • Designed to absorb the expansion forces and control the in pressure heating and ASME Pressurized Expansion Tanks for ASME Pressurized Expansion Tanks Heating and Cooling Systems Series ETA 15 240 Series – ETA ETA • 240°F (115°C) Maximum Temperature: • ASME fixed bladder type precharged expansion tank 96 10 Hydronics / Steam Heating Products Heating and Cooling Systems* Cooling and Heating TanksExpansion Pressurized for Dimensions– Weights SeriesETX, ETSX Precharge (field adjustable): 12psi (82.7 kPa) (82.7 12psi adjustable): (field Precharge Pressure:Working Maximum Temperature:Working Maximum (115˚C) 240˚F Ratings standing Free piping supply to Mounts ETSX ETX Models construction Steel • systems in glycol with Compatible • models standing free and In-line • diaphragm butyl flexible Rugged • kPa) (82.7 12psi at Precharged • Features in water hot of expansion thermal the absorb to Designed • *Not for use on potable water systems water potable on use for *Not T-0452.5 4.5 ETX-30 TX6 301. "FP 64642 1 406 1 16 21 32.6 406 FNPT 1" 24.9 16 81.0 FNPT 1" 13.3 62.0 ETSX-160 ETSX-110 6.0 33.0 3.0 ETSX-60 15.0 1.0 6.0 ETSX-30 2.1 ETX-60 ETX-15 TX4 00801 NT1 0 28 406 16 FNPT 1" 8.0 6.0 20.0 ETSX-40 15.0 ETX-90 TX9 401. 1 17.7 44.0 ETSX-90 closed loop heating systems. heating loop closed OE AKVL CET ONCINDAEE EGTWEIGHT HEIGHT DIAMETER CONNECTION ACCEPT. TANK VOL. MODEL ETX-90 and ETSX Series: 100psi (6.9 bar) (6.9 100psi Series: ETSX and ETX-90 kPa) (517 75psi ETX-60: ETX-30, ETX-15, gal. @12 psi @12 gal. VOL. For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 1 1 3 1 ⁄ ⁄ ⁄ ⁄ 1 1 1 2 2 4 2 ⁄ ⁄ ⁄ NT1 7 4361. 4.54 10.0 20 356 406 16 14 MNPT " 12 279 11 203 MNPT " 11 8 MNPT " MNPT " 4 4 4 NT2 3 217 2. 55.79 123.0 1575 62 533 47 21 533 36 FNPT " 21 533 FNPT " 21 FNPT " nm nm b.kgs. lbs. mm in mm in 3 ⁄ 8 9 17 290 ( 1 ⁄ 2 "– 1 13 13 11 13 3 3 7 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 8 16 16 16 16 2 2712050.80 112.0 1217 28.85 57.0 1087 1 . 2.3 5.0 318 1 2032.66 72.0 919 17.69 39.0 14.51 732 32.0 12.70 551 28.0 5.22 528 11.5 437 1 ⁄ 4 ") Height Diameter ETX ETSX ETX Height Diameter ETSX 97 Hydronics / Steam Heating Products 10 Combination Packages ET-ASF Series HP – includes air separator, 1⁄8" and 1⁄2" (3 and 15mm) service check valves, float vent, fill valve (some models include combination fill valve and backflow preventer) and expansion tank Series HP Bronze – includes bronze air separator, (2) 1⁄2" (15mm) service check valves, 1⁄2" (15mm) FV-4M1 float vent, bronze combination fill valve and backflow preventer and expansion tank Series HPP – boiler trim out package Series ET-ASF – includes air separator, float vent, and expansion tank For additional information request literature PG-HHS. HPX-C HP Bronze

FLOW SERVICE FLOAT VENT FILL VALVE / CHECK AIR SEPARATOR CHECK VALVE FV-4M1 DUO VENT FILL VALVE BACKFLOW PREVENTER 2000-M5 EXPANSION TANK MODEL 1" 11⁄4" 1⁄8" 1⁄2" 1⁄8" 1⁄8" B1156 911S B911S 1" 25mm 32mm 3mm 15mm 3mm 3mm 25mm SERIES HPX — EXPANSION TANK TRIM-OUT PACKAGES ETX-15 ETX-30 HPX-C XXXX X X HPX-D XXX X X X HPX-15C XXXX X X HPX-15D XXX X X X HPX-30 BC XXXX X X HPX-30 BD XXX X X X HPX-15 BC XXXX XX HPX-15 BD XXX X X X SERIES ETX-ASF — COMBINATION PACKAGES ETX-15 ETX-30 ETX-15-ASF XX X

SERIES HP BRONZE — BOILER TRIM OUT PACKAGES MODEL* AIR SEPARATORS SERVICE FLOAT VENT FILL VALVE/ EXPANSION TANK CHECK VALVE BACKFLOW PREVENTER ET-15 ET-30 AS-B-S AS-B-T FV-4M1 B911S 1" (25mm) 11⁄4" (32mm) 1" (25mm) 11⁄4" (32mm) 1⁄2" (15mm) 1⁄2" (15mm) 1⁄2" (15mm) 1⁄2" (15mm) 1⁄2" (15mm)

10 SERIES HPX BRONZE — EXPANSION TANK TRIM OUT PACKAGES ETX-15 ETX-30 HPX-15C-AB-S X2XXX HPX-15D-AB-S X2XXX Hydronics / Steam Heating Products Heating Steam / Hydronics HPX-15C-AB-T X2XXX HPX-15D-AB-T X2 X X X HPX-30C-AB-S X2XXX HPX-30D-AB-S X2XXX HPX-30C-AB-T X2XX X HPX-30D-AB-T X2 X X X *S = Solder air separator, T = threaded air separator end connections.

98 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com For additional information, request literature ES-RBFF literaturerequest information, additional For pressurereferencesystem convenient for pressuregauge kPa) (207 30psi to 0 • expan- of waterside pressurefrom unloading for valve ball integral with port Drain • expansion and pressureregulator water of isolation for valve ball 3-way Unique • joints threaded 11 to up eliminating construction, One-piece • Features Temperature:Inlet Maximum (121°C) 250°F • Pressure:125 Working Maximum kPa) (860 psi • Specifications require-piping manufacturers’ boiler with comply to solution convenient a Provides • RBFF Series Residential Boiler Fill Fitting Fill Boiler Residential • Hose thread connection for purge for connection thread Hose • shutoff tight drip and balancing Accurate • purging High-volume • design valve dual-ball Rugged, • Residential Purge and Balancing ValvesBalancing Purgeand Residential • 1" and 1 and 1" • • Positive shutoff dual-ball valve design — drip tight seal on balance port maximizes port balance on seal tight drip — design valve dual-ball shutoff Positive • seconds 10 in loop foot 500 purges — purging air Maximum • requiredassembly extra no — convenience One-piece • Features ES-RPV.literaturerequest information, additional For • Specifications start-up for solution cost low and unique a Provides • RPV Series • Maximum Inlet Temperature:Inlet Maximum (121°C) 250°F • kPa) (344 Pressure:50psi Working Maximum • RPV-ST Solder x FNPT x Solder FNPT x FNPT RPV-ST Solder x Solder RPV-T (DN) SIZE RPV-S OUTLET X INLET MODEL P- odrxSle 53 25 1 1 Solder x Solder Solder x Solder RPV-S RPV-S Solder x FNPT RPV-TS be used for a variety of system draining and filling operations. filling and draining system of variety a for used be also can port Drain maintenance. and servicing charge air for diaphragm tank sion pressuresystem from tank pressureregula- water and tanks expansion for service of ease provide and ments tor valves in closed-loop hot water heating systems. heating water hot closed-loop in valves tor effectiveness of purging of effectiveness loops. heating hydronic of balancing and purging 3 ⁄ 4 " solder and threaded connections threaded and solder " 1 ⁄ 4 " solder connection solder " For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 3 3 3 3 n mi.m n mi.m n mls kgs. lbs. mm in. mm in. mm in. mm in. mm in. 1 ⁄ ⁄ ⁄ ⁄ 4 4 4 4 ⁄ ( 4 3 ⁄ 4 ( 24 32 2 20 2 20 2 20 2 20 ", 1", 1 1", ", 1 ⁄ 2 ") 15 15 15 15 1 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 2 4 16 16 16 16 BCDE 1 ⁄ 1 2 114 4 52 2 95 2 75 2 75 2 75 75 ") DIMENSIONS (APPROX.) DIMENSIONS . 7 3 3 3 3 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 8 8 8 8 8 8 73 60 60 60 60 60 11 11 11 11 11 7 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 8 16 16 16 16 72 27 2 22 1 17 1 17 1 17 1 17 7 3 3 3 3 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 8 8 4 4 4 4 3120.5 1.2 0.5 73 1.2 0.5 60 1.2 0.5 44 1.2 0.5 44 1.2 0.5 44 1.1 44 WEIGHT sweat x male connections male x sweat RPV-SM-90– RPV-S-90– RPV– Models B with 180° relief port relief 180° with E with 90° relief port relief 90° with with 90° relief port and port relief 90° with Outlet Inlet C RBFF D RPV 99 Hydronics / Steam Heating Products 10 AS ", 3" AS-B-T 2 ⁄ D 1 " (15mm) 2 ⁄ 1 C DuoVent ", 2", 2 " (25 – 32mm), 2 4 ⁄ ⁄ 1 1 A " 1 4 ⁄ 1 " (3mm) female threaded 8 ⁄ 1 B sweat connections threaded threaded connections D1 Sizes 1" and 1 " feed water tapping Sizes 1", 1 2 ⁄ 1 ing as max. float line of water is always lower than the valve seal resistant polyethylene Features • Body and cover are brass construction • Air vent with silicone rubber seal • Impurities do not usually affect function- AS – female threaded connection for expansion tank. AS-T – (25 – 80mm), NPT female inlet/outlet connections. With connection for float vent and with • Float is high temperature • Suitable for use with glycol systems Models AS-B-S – AS-B-T – AS-T WEIGHT 88 4.2 4.2 119 119 D1 16 16 ⁄ ⁄ 5 5 8 11 16 16 ⁄ ⁄ 5 7 68 68 ") 4 ⁄ (862 kPa) 275°F (135°C) (8.6 bar) 1 16 16 ⁄ ⁄ No maintenance is normally necessary. the can DuoVent be disassem- However, bled for inspection or cleaning. Maintenance Specifications • Maximum Working 125psi Pressure: • Maximum Operating Temperature: For additional information, request literature ES-AS-B. Specifications • Maximum Working 125psi Pressure: • 275°F (135°C) Maximum Temperature: For additional information, request literature S-AS/AST. 11 11 " – 8 ⁄ (1" – 3") 1 DIMENSIONS (APPROX.) ( 79 2 8 ⁄ 1 3333 3 3 76 2 " (15mm) Watts AB CD 2 ⁄ 1 16 16 ⁄ ⁄ " tapping for fill 5 5 2 ⁄ 1 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com 31 81 " (20, 25, 32mm) NPT, 32mm) 25, (20, " 4 ⁄ " (3, 8mm) NPTF 1 4 ⁄ 1 8 4 ⁄ ⁄ in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. 1 1 ", 1", 1 1", 8 ⁄ 1 4, 4, ⁄ 3

150psi (10.3 bar) 1.45psi (10 kPa) (116°C) and venting of air in the hot water heating system when installed in conjunction with the Model Watts ET expansion tank and Model FV4 float-vent valve piping sweat or threaded inlet/outlet connections inlet/outlet threaded or sweat model FV4-M1 float vent to provide complete, continuous purging and venting of air in the system boiler fill, expansion tank and air vent MODEL SIZE (DN) DuoVent

DuoVent Series Series AS, AS-T Air Separators for Removing Air from in Water Hydronic Heating Systems • Maximum Working Pressure: • Minimum Working Pressure: High Capacity Air with Vent Manual Feature Vent • 240°F Maximum Working Temperature: For additional information, information, additional For ES-DuoVent. literature request Specifications • Sizes:

Provides Provides automatic air venting for hot or cold water distribution systems. The vent feature provides tremendous air elimination capability for lightening fast venting of residential and commercial systems. The valve DuoVent utilizes a float to actuate the valve plug which is located at the top of the valve. Once the air is displaced and the system is pressure sustained, the valve plug seals and prevents any water from escaping from the system. The float vent can also operate as an anti-vacuum device since it will permit air to enter the system when it must be drained. Series DuoVent Series DuoVent • Efficient separation of air • Heavy cast iron construction • Provides complete, continuous, purging • AS model includes

• Bronze construction • Sizes Series AS-B Bronze Air Separator • Standardly furnished with tappings for • Comes standard with

10 Hydronics / Steam Heating Products 100 • Purges air that may be in the wa the in be may that air Purges sys ter tem • sys distribution water cold or hot for venting air automatic Providestems • FV-4M1Series Automatic VentValveAutomatic • Simple two piece construction piece two Simple • handwheel resistant Heat • check ball shutoff Positive • • Working Pressure: minimum 1.45psi (10 1.45psi Pressure:minimum Working • Sizes • Specifications they dry discs As release. air control to discs retainingmoisture utilizes HAVvalve The • HAVSeries Automatic Vent for Hot Water Heating Systems WaterHeating Hot Vent for Automatic • Suitable for use with glycol systems glycol with use for Suitable • temperature high is Float • Max.Working Pressure: 150psi (10.3 bar) • Working Min. Pressure: 1.45psikPa)(10 • Temp.:Working Max. (116°C) 240°F • Sizes • Specifications • Maximum Temperature: Maximum (121°C) 250°F • bar) (10.3 Pressure:150psi Maximum • Specifications installations heater tankless for Used • equipment to water of flow the limit to Designed • P3 Series Multi-orifice Flow Control for Tanklessfor Control Flow Heaters Multi-orifice allow air to escape, when wet they provide positive shutoff positive provide they wet when escape, to air allow kPa), maximum 125psi ( 8.6 bar) 8.6 ( 125psi maximum kPa), resistant polyethylene resistant 1 1 ⁄ ⁄ 8 8 " (3mm) and (3mm) " " – 1" (3 – 25mm) NPTF 25mm) – (3 1" – " For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 1 ⁄ 4 " (8mm) " ( 1 ⁄ 2 ") ( 1 ⁄ 8 ", 1 ⁄ ( 4 1 ") ⁄ 8 " – 1") – " • WaterTemperature: 140°F minimum • Size requestliterature ES-FV4-M1. Foradditional information, gpm (10, 11, 13 or 15 lpm) 15 or 13 11, (10, gpm 4 or 3.5 3, cylinder,2.5, orifice to adjusts edglycol based additives are permissible Suitablefor water only additives: only inhibit- (60 °C), maximum 240°F (116 °C) (116 240°F maximum °C), (60 1 ⁄ 2 " (15mm), solder connection. Multi- connection. solder (15mm), " request literature ES-HAV.literaturerequest information, additional For request literature ES-P3. literaturerequest information, additional For (15 – 25mm) – (15 FV-4M1 1 (3 – 8mm) – (3 ⁄ 1 FV-4M1 2 ⁄ " – 1" – " 8 " - " HAV 1 ⁄ 4 P3 " 101 Hydronics / Steam Heating Products 10 PIPF-T IPF-T-M1 IPF-S-M1 For additional information, request literature ES-IPF For additional information, request literature ES-PIPF " - 2" (15 – 50mm) Threaded 2 ⁄ 1 ") 4 ⁄ 1 " – 2") 2 ⁄ 1 ( " – 1 4 ⁄ 3 ( For assistance, contact your local authorized agent Watts or visit our website at www.watts.com " - 2" (20-50mm) Solder end connection " - 2" (20-50mm) NPT threaded end connection 4 ⁄ 4 ⁄ 3 3 " – 2" (15 – 50mm) Sweat (IPF-S-M1), " (15mm) Solder end connection " (15mm) NPT threaded end connection 2 ⁄ 2 2 ⁄ ⁄ 1 1 1

(IPF-T-M1) ball valves, boiler drains and copper tees IPF-T-M1 – IPF-T-M1 IPF-S – Models IPF-T – Specifications • Maximum working 600psi Pressure: (41.3 bar) WOG

• Ball isolation Valve for circulator pumps • Adjustable packing gland • Brass body & flange • Optional T handle included • Available with threaded or solder connections • Sizes Series Series IPF-M1 Isolation Isolation Pump Flanges for Circulator Pumps IPF-S-M1 – Isolation Pump Flanges with Port Purge & Swivel Flange Specifications • Maximum Working 400psi Pressure: (27.6 bar) WOG

• Ball valve isolation for circulator pumps • Integral purge port saves time and money compared to purge stations made with • Swivel flange allows purge port to be positioned for optimal purging convenience • Brass body & flange • Double O-ring stem sealing technology eliminates packing leaks • Available with threaded or solder end connections Series PIPF

10 Hydronics / Steam Heating Products 102 • Uses existing cover existing Uses • traps radiator existing most to Adapts • instantly traps radiator old Upgrades • inventory standardizes and Simplifies • kit repair trap radiator economical and easy Quick, • Quik-Fix QF Series TrapKits Replacement Hydronic Two-wayHydronicChecks Flow Universal • Maximum Working Pressure: 125psi (8.6 Pressure:125psi Working Maximum • • Maximum Working Pressure:50psi Working Maximum • Specifications circulator when shutoff gravity positive provide to systems heating water hot forced For • 2000-M5 Series checks, sizes checks, – 2000-M5 Models • Maximum Temperature: Maximum (121°C) 250°F • • Diaphragm and seat both replaceable both seat and Diaphragm • seat valve steel Stainless • phosphor pressureduplex Balanced • Specifications systems heating from gases non-condensable and air condensate, Removes • MGH MG, GH, G, Series Thermostatic Steam TrapsSteam Thermostatic is not running not is bar) for 1 for bar) 32mm) – (20 (344.8 kPa) for sizes for kPa) (344.8 (-16°C) 3°F within sensitive diaphragm bronze steam conserve to rpadodta at.te npcpueot t cover. it. onto capsule snap then parts. trap old and trap 23 12 Remove cover of Install seat adapter, Replace original Replace adapter, seat Install of cover Remove QUICK,EASY INSTALLATION 1 combines angle and horizontal and angle combines TM ⁄ 2 " – 3" (40-80mm) 3" – " 3 ⁄ 4 " – 3" (20 – 80mm), iron 80mm), – (20 3" – " Radiator Steam Radiator For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 3 ⁄ 4 " – 1 – " 1 ⁄ 4 " ( 3 ⁄ 4 " – 3") – " requestliterature ES-QF. Foradditional information, body construction. Sizes construction. body 2000S-M5 – 2000S-M5 check. angle at installed when tank expansion an of installation the for used be can connection One nections. con- threaded female two x outlet flanged one have 80mm) – (50 3" – 2" Sizes connections. threaded female have 40mm) solder inlet and outlet connections. outlet and inlet solder construction, body bronze 25mm), – (20 Vacuum to 65psi) Vacuumto Hg (25" applications heating vacuum – MGH and MG 25psi) Vacuumto Hg (25" applications heating – GH and G Models straight pattern, sizes pattern, straight for low pressure and vacuum pressureand low for ( 1 for medium pressureand medium for ⁄ 2 " – 1") – " 3 ⁄ 4 " – 1 – " Seats Replaceable 1 ⁄ 2 " (20 – (20 " 3 ⁄ 4 " – 1" – " request literature ES-2000. literaturerequest information, additional For literature ES-G/GH/MG/MGH. literature request information, additional For Integral Seats Integral CapsuleCapsule 2000S-M5 2000-M5 1GAP QF 103 Hydronics / Steam Heating Products 10 6G WIB WFT For additional information, request literature ES-G/MG. For additional information, request literature ES-WFT. Inverted Bucket Traps have Inverted very Bucket limited Traps air ed mend om venting capabilities and it is rec that an auxiliary air vent be utilized if any ty of air is anticipated. ti quan For additional information, request literature for ES-WIB. for steam for steam for steam " (15-20mm) for operating 4 ⁄ 3 "- "-1" (15-25mm) for operating 2 2 ⁄ ⁄ 1 1 Models WIB 80 – pressures up pressures to 150psi (10.3 bar) WIB 81 – pressures up pressures to 250psi (17.2 bar) Models 6G-15 through 111MG-15 – main drip and process equipment applications (25" Hg to 15psi, 103 kPa) 7MG-30 through 111MG-30 – main drip and process equipment (25" Hg to 30psi, 207 kPa) 6MG-50 through 111MG-50 – main drip and process equipment applications (25" Hg to 50psi 345 kPa) " – 2") 4 ⁄ " (20, 25, 32mm), has been de signed to offer " (20, 25, 32mm), has been de 3 4 ⁄ ( 1 " – 2") " – 1") 4 ⁄ 2 ⁄ 3 ( 1 ( ", 1", 1 4 ⁄ 3 ", 2" (40, 50mm), the inlet and outlet taps are lo cat ed in the cov er, ed in the cov cat ", 2" (40, 50mm), the inlet and outlet taps are lo 2 ⁄ 1 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com " – 2" (20 – 50mm) 4 ⁄ 3

"- 1" (15-25mm) pipe sizes 2 ⁄

thermostatic air vent (17.2 bar) @ 406°F (673°C) (103, 207, 517 kPa) 125psi (8.6 bar) pressures differential disturbing piping 1 Maximum Working Pressure: 250psi (17.2 bar) (17.2 250psi Pressure: Working Maximum even wear, longer valve even and wear, seat life mum ef fi cien cy cien fi mum ef al lowing for the larg er ca pac i ties needed i pac er ca lowing for the larg al max i mum in stal la tion flex i bil i ty i bil i tion flex la stal mum in i max • Wide selection •nents po All stainless steel internal com • All stainless steel balanced pressure • Maximum Working 250psi Pressure: Specifications • and Valve seat combinations 15, 30, 75, Specifications • • • Working parts removable without • Stainless valve head and seats • Seamless copper float • Condensate valve rotates to ensure Specifications • “H” pattern body on all Float & Thermostatic Steam Traps • Larger sized traps, 1

• De signed to pro vide con tin u ous air venting and sep a rate con den sate drain ing with max i - i ing with max sate drain den rate con a ous air venting and sep u tin •vide con signed to pro De Series WFT

•ment Designed for reliable condensate removal on virtually all types of steam equip Series WIB Inverted Bucket Steam Traps • Traps can be serviced without dis turb ing system pip ing •ing system pip turb can be serviced Traps without dis

• Fail safe operation – in case of float failure, trap discharges condensate and air • Air vent parts accessible without disturbing piping • Straight-through connections save space, installation headroom time, labor, Series Series G, MG Float and Thermostatic Steam Traps

10 Hydronics / Steam Heating Products 104 Steam Radiator ValvesRadiator Steam Steam Air VentsAir Steam RA-2-AP – RA-2-AP connections union male x body, FIP bronze valves, • Used on radiators, convectors, and steam mains steam and convectors, radiators, on Used • systems heating steam non-vacuum on air vent to Designed • SV Series – RA-1-AP Models Teflon• RA Series connections union body,male brass x valve, FIP and Repair Kits Repair and TrapSteam Assemblies Thermostatic Cover and Float WFTC – WFTC Models traps steam series FT Sarco Spirax for kits replacement quality High • WFTC Series reduction in the trap’sthe in reductioncapacity. no broken; be to need connections pipe repair.of ease No for on bolts simply which vent thermostatic and linkage float, valve, cover,condensate of gasket, sisting cover con- unit assembled factory complete, a of consisting assembly cover 32mm), – (20 • Discharges condensate at near to steam temperature steam to near at condensate Discharges • (41.3 bar) (41.3 Pressure:600psi Working Maximum connections threaded female NPT WTD-600 – WTD-600 Specifications process small and lines, tracing steam mains, steam drain to Designed • WTD-600 Series Thermodynamic Steam TrapsSteam Thermodynamic SVS-1 – SVS-1 connection SV – SV Models straight connection straight SVA– connection equipment efficiently equipment Size: Size: ® stem packing stem Sizes: Size: 1 ⁄ 1 1 8 1 ⁄ ⁄ Sizes: " (3mm) non-adjustable angle non-adjustable (3mm) " 2 2 ⁄ 8 " – 1 – " angle 50mm), – (15 2" – " " (3mm), adjustable angle adjustable (3mm), " 1 ⁄ 3 8 ⁄ " (3mm), non-adjustable (3mm), " 4 " -1 " 1 3 ⁄ 4 ⁄ 8 " (20 – 32mm), angle 32mm), – (20 " For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For " – 1" (10 – 25mm), – (10 1" – " 1 ⁄ 4 " ( ( 1 1 ⁄ 8 ⁄ 2 " – " " – 2") – " 3 ( ⁄ 3 4 ⁄ ") 4 " – 1 – " ( 3 ⁄ 1 8 ⁄ " – 1") – " 4 ing pipingconnectionsing cover plate.theinto covergasket.largetrapshav-andforUsed mostaticvent,float,airlinkage, valve, seat 50mm),completether-containskit a – (40 WFTK – WFTK SVS-2 – SVS-2 adjustable straight connection straight adjustable non- 15mm), or (20 connection inlet SVS-3 – SVS-3 connection straight valve with FIP x male union connections union male x FIP with valve – RA-1-SW connections FIP body,x bronze union valve, female vector RA-CV – RA-CV "), WFTK Sizes:1 Size: Size: 1", 1 1", 1 ⁄ 2 3 " – 1 – " 1 1 ⁄ ⁄ ⁄ 4 4 4 "male inlet or " (25, 32mm), angle con- angle 32mm), (25, " " (8mm), non-adjustable (8mm), " 1 ⁄ 2 " – 2" – " 1 ⁄ 2 " (15 – 40mm), gate 40mm), – (15 " (1 1 ⁄ 2 " – 2") – " 1 ⁄ 2 "female request literature ES-WTD. literaturerequest information, additional For request literature ES-WFTC/WFTK. literaturerequest information, additional For or ES-RA-CV.or ES-RA-1-AP,ES-RA-1-SW, ES-RA-2-AP, literaturerequest information, additional For request literature ES-SV.literaturerequest information, additional For WTD-600 RA-1-AP WFTC SVA 105 Hydronics / Steam Heating Products 10 N50 FS10-CL For additional information, request literature F-FS10C/FS10F/FS20. For additional information, information, For additional F-FS10C/FS10F/FS20. literature request For additional information, request literature IS-N89. " or 4 ⁄ 1 Size: 1" (25mm), NPT Size: 1" (25mm), NPT male Size: 1" (25mm), NPT male (1") Nema 4X rated water-tight, rated 4X Nema Dual switch assembly for line Single switch assembly for burner " (25, 32 or 40mm) using standard 2 ⁄ 1 Models FS10-C – connection, standard unit. FS10-CL – connection , standard unit with indicator light. – FS-20 enclosure resistant corrosion and dust-tight in flow of monitoring accurate an provides applica- wet or outdoor servicing pipelines connec- male NPT (25mm), 1" Sizes: tions. bar). (10.3 150psi pressure Maximum tion. (149°C). 300°F temperature Maximum ASTM tees; FL model has indicator light. Models FS-10F/FS-10-FL – male connection. For pipe sizes 1", 1 1 Models N50S – service with extra terminal for line voltage single pole, double throw service N50D – voltage burner service and independent low (or high) voltage alarm, feed valve or pump starter (1") (1") For assistance, contact your local authorized agent Watts or visit our website at www.watts.com

(10.3 bar) air conditioning and processing installations (12.1 bar) 4-10 gpm (15.2-38 LPM) female top and bottom connections. Paddle-type Paddle-type Flow Switches Actuated by Liquid Flow Specifications • Maximum Working 150psi Pressure: • 300°F (149°C) Maximum Temperature:

• For automatic controls or safety devices • Used to monitor liquid flow in pipelines servicing water and heating systems, Series Series FS10-C, FS-20 Specifications • Maximum Working 175psi Pressure: • UL listed/FM/ULC approved. For use on fire sprinkler branch lines Series FS10-F Water Flow Water Detectors for Automatic Fire Protection Sprinkler Service • 300°F (149°C) Maximum Temperature: • Factory set and sealed for flow rate of Low Water Low Cut-offs Water Specifications • Float chamber has 1" (25mm) NPT • Protects hot water heating boilers against emergency low water conditions • Used on low process pressure boilers Series N50

10 Hydronics / Steam Heating Products 106 • Maximum WaterPressure:125psi Maximum • Boiler Water Feeders for Process Boilers Process for WaterFeeders Boiler with single switch assembly.switch single with – SAN50S kPa). (344.8 pressure50psi boiler Maximum switch. – SAN50D N101S. and WattsN89S for assembly switch – SAN89S kPa). (103.4 assembly.pressure15psi steam Maximum – SAN89D Models Onepiece unit facilitates installation andassures user ofthemost up-to-date construction • SAN50 SAN89, Series 10psihigher(68.9kPa)steampressure.than Note: Pressure:100psi Steam Maximum • Specifications boilers process small other and machines pressing on Used • 144 142, Series Float and SwitchFloatAssembliesand Servicing forWaterLow Cut-offs (8.6 bar) (8.6 kPa) (689.5 The waterpressureThe leastat bemust Same as above, but furnished but above, as Same single with but above, as Same Complete assembly with dual with assembly Complete switch dual and float Complete For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For ( 1 ⁄ 2 ") tions. Water feed connection Waterfeed tions. connec- feed boiler.water in level External operating water correct the maintain to – 144 142S chamber.float through feed Direct permissible. is chamber float through feed – 142 Models 144S – 144S female. NPT (25mm) 1" connection chamber Float female. NPT – With strainer. With – Water is fed automatically as needed as automatically fed Wateris when machines pressing on Used With strainer. With ( 1 ⁄ 2 ", 1") ", 1 ⁄ 2 " (15mm) " request literature IS-N89. literaturerequest information, additional For request literature IS-142. literaturerequest information, additional For SAN89 142 107 Hydronics / Steam Heating Products 10 HBV OTV UL-1 HWA For additional information, request literature ES-HWA. For additional information request literature ES-OTV. For additional information, request literature ES-HBV. For additional information, request literature ES-UL. " " " 4 ⁄ 4 4 ⁄ ⁄ 1 1 3 " (15 & 20mm), 4 " (15mm) male con- male " (15mm) ⁄ 2 3 ⁄ " (15mm) male connec- 1 2 " & ⁄ " – 1 2 1 " – 1 ⁄ 2 ⁄ 2 1 ⁄ " & 1 1 2 ⁄ 1 " (10mm) female connection female " (10mm) 8 Sizes Sizes ⁄ Sizes 3 Sizes: Sizes Sizes: " (10mm) male connection connection male (10mm) " 8 ⁄ 3 (15 – 32mm), FIP female x threaded male union. Sizes bronze body, solder x bronze threaded body, male union connections Models HWA – (15 – 32mm), FIP female threaded (15 x – FIP threaded 32mm), female male threaded union UL-2 – Models UL-1 – (15 and 20mm), solder x male union connections Models – OTV-FL – OTV-M tion x x tion nection x nection ") 2 ⁄ ") 1 4 ⁄ 1 " – 1") ") 2 " – 1 – " 2 ⁄ ⁄ 2 ⁄ 1 1 ( 1 ( " – 1 ( 2 ⁄ 1 ( For assistance, contact your local authorized agent Watts or visit our website at www.watts.com " – 1" (15 – 25mm), solder x solder 2 ⁄ 1

Sizes connections Maximum Working (non-shock) Pressure 600psi (41.3 bar) WOG 125psi (8.6 bar) steam: 15psi (103.4 kPa), hot water 60psi (413.7 kPa) (4.2 bar) non-shock for hot water Bronze Bronze Union Elbows for Steam/Hot Systems Water

• Pressure-tested • elbow. Pressure-tested Series UL

• Metal to metal seats • Heavy duty brass construction • Screwed bonnet • Rising stem Series OTV

Bronze Hot Water Angle Valves Angle Water Hot Bronze • Used on gravity (hot water) heating systems only Series HWA HWA Series Oil Tank Valves Oil Tank Hydronic Balancing Ball Valves Ball Balancing Hydronic Specifications • • Used with forced hot water systems Series Series HBV • • • Maximum Working WOG Pressure: Specifications Specifications • saturated non-shock Pressure Working Specifications • Maximum Working 60psi Pressure:

10 Hydronics / Steam Heating Products 108 • • • Specifications USG-DP-M1 – – USG-DP-M1 Available: Also • lowing: fol- the of each two includes packaging, play • • Hot Inlet Temperature:Inlet 180°F Hot – 120°F • gpm 0.5 Required: Rate Flow Minimum • • Minimum Supply PressureRequired: Supply Minimum • Specifications • Includes tamper resistant locking cap locking resistant tamper Includes • debris out filter strainers intergral and cross-flowprevent valves check Built-in • • Includes locking cap locking Includes • debris out filter strainers integral and cross-flowprevent valves check Built-in • • Maintain, ±3°F mixed water temperatures up to maximum outlet temperature of 120°F of temperature outlet maximum to up temperatures water mixed ±3°F Maintain, • faucets and valves stops between installs Quickly • Under Sink Guardian™ ProfessionalGuardian™ Sink Under • Maintain, ±3°F mixed water temperatures up to maximum outlet temperature of 120°F of temperature outlet maximum to up temperatures water mixed ±3°F Maintain, • faucets and valves stop between installs Quickly • • Thermoplastic body with body Thermoplastic • Certified B-125 CSA listed, 1016-96 ASSE • Guardian™ Sink Under USG-P Series with body brass Heavy-duty • Certified B-125 CSA and listed 1070 ASSE 1016-96, ASSE • protectionfixture single for Professional Plumbing the for Designed • USG-B Series USG-P-M1 MODEL *Now includes integral strainers. integral includes *Now USG-B-M1 MODEL USG-B-SC-M1 3 3 flexible braided pvc connectors pvc braided flexible (49°C – 82°C) – (49°C lpm) (1.9 kPa) (207 30psi when limit stop is properly set properly is stop limit when when limit stop is properly set properly is stop limit when used in most kitchen and bathroom lavatories bathroom and kitchen most in used used in most kitchen sinks or bathroom lavatories bathroom or sinks kitchen most in used (4°C-29°C) 85°F – 40°F Temperature: Inlet Cold (49°C-82°C) Temperature:Inlet 180°F Hot – 120°F Minimum Supply Pressure: 30psi (207 kPa) ⁄ ⁄ 8 8 " x " x " 1 3 ⁄ ⁄ 2 8 " No 66-CP adapters 66-CP No " compression x compression 12" x " Complete installation kit in dis- in kit installation Complete For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For Thermoplastic Satin Chrome Satin 3 ⁄ 8 Bronze " compression fittings that accommodate the supply lines supply the accommodate that fittings compression " FINISH 3 FINISH ⁄ 8 " compression fittings that accommodate the supply lines supply the accommodate that fittings compression " ( 3 ⁄ 8 ") • Maximum Working Pressure:150psi Working Maximum • MaximumInlet Temperature: • 180°F (82°C) TemperatureOutlet: Adjustment • TemperatureInlet Minimum Differential: • Temperature:Inlet 85°F Cold – 40°F • (10.3 bar) (10.3 Range 80°F – 120°F (27°C – 49°C) – (27°C 120°F – 80°F Range (2.8°C) 5°F 29°C) – (4°C 3 3 3 • • • ⁄ ⁄ ⁄ 8 8 8 CONNECTION SIZE CONNECTION " Compression " " Compression " Compression " CONNECTION SIZE CONNECTION (10.3 bar) (10.3 Pressure:150psi Working Maximum 49°C) – (27°C Temperature120°F – 80°F Out: (2.8°C) 5°F TemperatureInlet Minimum Differential: • Ferrule for use with pex or pex with use for Ferrule • • 9 polybutylene supply tubing supply polybutylene ⁄ 16 " x " 1 ⁄ 2 " adapters " 5 5 5 in. in. 3 3 3 ⁄ ⁄ ⁄ 16 16 16 HEIGHT HEIGHT 3 3 132 3 3 3 132 132 mm mm requestliterature ES-USG-B. Foradditional information, requestliterature ES-USG-P. Foradditional information, USG-DP-M1 n mm in. n mm in. 1 1 1 ⁄ ⁄ ⁄ 8 8 8 WIDTH WIDTH 9150.68 1.5 79 9150.68 0.68 1.5 1.5 79 79 Height Height Patent# 6,315,209 Patent# Patent# 6,315,209 Patent# b.kgs. lbs. b.kgs. lbs. USG-B-M1 WEIGHT USG-P-M1 WEIGHT

Width Width 109 Tempering Valves 11 Inlet L111 Cold Water Water B D MMV-M1 A A Inlet Mixed Water Water Mixed C B (shown with CS-U Check Stops Installed) For additional information, request literature ES-MMV. Hot Inlet Water Water WEIGHT WEIGHT 9285 1.688 1.593 .73 1.679 .68 1.685 .73 1.590 .73 1.6 .68 1.6 .73 .73 8080 1.586 1.680 .68 1.686 .73 1.5 .73 1.6 .68 .73 106108 2.88 3.65 1.31 1.66 175 3.5 1.5 8 8 8 8 8 4 16 16 16 16 16 16 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 5 5 3 1 3 3 5 7 1 5 9 3 3 16 union CPVC connections ⁄ 11 ", 1" (15 – 25mm) union PEX connections 4 ⁄ union Quick-Connect connections union solder connections union thread connections 3 ", 2 ⁄ 1 159163165 4 4 4 102 2.17 .98 137137 3 143 3 137 3 143 3 149 3 142 3 145 3 150 3 136 3 142 3 147 3 3 US – End Connection Options add Suffix: UT – PEX – CPVC – QC – BC 8 8 8 8 16 8 16 4 2 16 16 16 16 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 5 3 5 7 7 7 7 7 9 5 9 DIMENSIONS 11 13 DIMENSIONS (APPROX.) 168177 6 181 6 6 124124 5 135 5 123 5 135 5 148 5 133 5 140 5 149 5 121 5 133 5 144 5 5 A " – 1") ") 2 ⁄ AB D 2 8 8 16 16 4 2 8 4 4 16 8 16 8 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 ⁄ ⁄ 5 1 7 7 1 1 7 3 1 5 5 ( in. mm in. mm. in. mm lbs. kgs. 1 15 13 13 11 6 7 4 5 5 5 4 4 5 5 5 ( 6 4 5 5 15 3 76 4 102 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com MODEL MMV-UT-M1 MMV-US-M1 MMV-QC-M1 MMV-PEX- M1 MMV-PEX- MMV-CPVC-M1 SIZE (DN) 2 ⁄ in. mm in. mm in. mm in. mm lbs. kgs. 1 15 20 15 20 15 20 15 20 15 20 integral check, strainer, and integral stop check, valves. strainer, Sizes:

" (15mm) threaded female inlet and outlet SIZE (DN) 2

⁄

4 4 2 2 4 2 2 4 2 4 accurate within ±3°F (±1.7°C) 1 Temperatures for inlets: hot, 120°F to 180°F (49°C – 82°C); cold, 33°F to 85°F (0.5°C – 29°C) – (0.5°C 85°F to 33°F cold, 82°C); – (49°C 180°F to 120°F hot, inlets: for Temperatures tamper-resistant cover to tamper-resistant ensure long life temperature temperature control CSA B-125 Certified ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 25 1 25 1 25 1 25 1 25 (27ºC – 49ºC) adjustable L111 1 3 3 1 3 3 1 1 3 1 in. mm MODEL Thermostatic Mixing Valve Options add Suffix: CS-U – For additional information, request literature ES-L111. • 10°F (-12°C) Minimum Temperature: Differential • ranges from 80°F to Outlet 120°F Temperature: (27°C – 49°C); adjustable by contractor; Specifications •

• lavatories or showers single for use of point at temperature water mixed desired Maintains • ASSE 1016-96 listed, ASSE 1069 listed and ASSE 1070 listed • Brass body construction with polyetherimide control cartridge and polypropylene Model L111 • Minimum Working 15psi Pressure: (103 kPa) • Maximum Working 125psi Pressure: (8.6 bar) • Thermostatic Thermostatic Mixing Valves Specifications • Bronze body 200ºF (93ºC) • Maximum Temperature: • Maximum Working 150psi Pressure: (10.3 bar) Ranges from 80ºF • – Outlet 120ºF Temperature:

• For use in domestic water systems at the point of use to provide accurate outlet • ASSE 1016-96 listed, ASSE 1017, ASSE 1069 listed and ASSE 1070 listed, Series MMV Series MMV

11 Tempering Valves 110 • ASSE 1017 listed, CSA B-125 Certified B-125 CSA listed, 1017 ASSE • • Provides additional safety by restricting water flow to a trickle a to flow water restricting by safety additional Provides • • Double throttling design combines control of hot and cold water to provide sensitive provide to water cold and hot of control combines design throttling Double • Hot WaterTemperatureHot ValvesControl MaximumWorking Pressure:150psi (10.3 bar) • Temperature: Maximum (93ºC) 200ºF • body Bronze • Specifications the of temperaturereduce to systems water hot domestic in water cold and hot Mixes • L1170 1170, Series QC – QC L1170 - Low temperature range, can be set to any to set be can range, temperature Low - L1170 90ºF between temperature any to set be Can - 1170 Models – CPVC – PEX – US – UT Suffix: add Options Connection End request literature ES-1170/L1170. literaturerequest information, additional For upon loss of cold water flow water cold of loss upon response to changes in water temperature passing through mixing chamber mixing through passing temperature water in changes to response hot water supply water hot n mm. in. 3 1 3 1 3 1 3 1 3 1 25 25 1 1 25 25 1 25 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 4 2 4 2 4 2 4 2 4 2 union thread connections thread union union solder connections solder union SIZE (DN) SIZE Quick-Connect connections union PEX connections PEX union union CPVC connections CPVC union (16ºC and 49ºC) and (16ºC 120ºF and 60ºF between temperature 71ºC) and (32ºC 160ºF and 017-E-25 20 5 15 1170-PEX-M2 20 15 1170-US-M2 20 15 1170-UT-M2 20 15 20 15 For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 1170-CPVC-M2 1170-QC-M2 MODEL 5 5 6 4 5 7 5 6 5 4 5 4 4 13 13 15 11 n mi.m n mls kgs. lbs. mm in. mm in. mm in. 5 5 1 1 7 7 1 5 1 3 7 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 2 4 16 16 8 8 8 16 8 16 4 4 8 ABCD ( 1 ⁄ 8 6 6 6 181 5 5 177 5 168 5 144 133 5 5 121 5 149 5 140 5 133 5 148 5 135 5 123 135 124 124 2 " – 1") – " 13 11 7 9 5 9 7 7 1 1 7 7 5 3 5 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 16 16 16 16 2 4 16 8 16 8 8 8 8 5 0 .7.98 2.17 102 4 4 4 3 165 3 163 3 159 3 147 3 142 3 136 3 150 3 145 3 142 3 149 3 143 3 137 143 137 137 3 9 5 1 7 5 3 3 1 5 5 3 1 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 16 16 16 16 16 16 16 16 4 8 8 8 8 8 Hot Water Inlet 0 .51.61 1.31 3.65 2.88 108 106 016.73 .73 .68 .73 1.6 .73 1.6 .68 1.5 .73 1.6 .73 90 1.6 .68 85 1.5 .73 79 1.6 .73 93 1.6 .68 88 1.5 85 1.6 92 1.6 86 1.5 80 86 80 80 B C WEIGHT Mixed Water 1170-M2 Inlet A Cold Water Inlet 111 Tempering Valves 11 Series 70A (1⁄2") Hot water extender tempering valves • For residential installations, mixes cold and hot water to extend capacity of water heater, storage tanks and hot water boiler tankless heaters Models 1 70A-F – Sizes ⁄2" (15mm), solder connec- L70A-F – Sizes 1⁄2" (15mm), tions, temperature range solder connections, temperature range 70A 120° – 160°F (49° – 71°C) 100° – 130°F (38° – 54°C) 1 70A-T – Sizes ⁄2" (15mm), NPT female L70A-T – Sizes 1⁄2" (15mm), NPT female connections, temperature range connections, temperature range Features 120° – 160°F (49° – 71°C) 100° – 130°F (38° – 54°C) • All brass or bronze construction 3 70A – Sizes ⁄4" (20mm), solder L70A – Sizes 3⁄4" (20mm), • Adjustable knob for temperature control connections, temperature range solder connections, temperature range • High capacity 120° – 160°F (49° – 71°C) 100° – 130°F (38° – 54°C) • Low pressure drop 3 70A-T – Sizes ⁄4" (20mm), NPT female L70A-T – Sizes 3⁄4" (20mm), NPT female connections, temperature range connections, temperature range For additional information, 120° – 160°F (49° – 71°C) 100° – 130°F (38° – 54°C) request literature ES-70A. A MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT ACDD1 E in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. C

70A-F 1⁄2 15 2 50 23⁄4 70 1 25 13⁄8 41 13⁄16 21 0.68 .30 70A-T 1⁄2 15 23⁄4 70 23⁄4 70 15⁄8 41 13⁄8 41 13⁄16 21 1.30 .59 70A 3⁄4 20 23⁄4 70 23⁄4 70 13⁄8 41 13⁄8 41 13⁄16 21 0.96 .44 70A-T 3⁄4 20 23⁄4 70 23⁄4 70 13⁄8 41 13⁄8 41 13⁄16 21 1.20 .54 D L70A-F 1⁄2 15 2 50 23⁄4 70 1 25 13⁄8 41 13⁄16 21 0.60 .29 D1 L70A-T 1⁄2 15 23⁄4 70 23⁄4 70 15⁄8 41 13⁄8 41 13⁄16 21 1.30 .59 L70A 3⁄4 20 23⁄4 70 23⁄4 70 13⁄8 41 13⁄8 41 13⁄16 21 0.96 .44 E L70A-T 3⁄4 20 23⁄4 70 23⁄4 70 13⁄8 41 13⁄8 41 13⁄16 21 1.20 .54

3 N170-M3 Series N170 ( ⁄4" – 2") Hot water master tempering valves • For use on larger hot water supply systems for mixing hot and cold water for a variety of applications to extend the hot water supply.

F Specifications Features • Maximum Operating Pressure: 125psig • ASSE 1017 and IAPMO cUPC Listed G 11 (861 kPa) • N170-M3 uses paraffin-based thermostat • Maximum Hot Water Temperature: to sense and adjust outlet temperature 200°F (93°C) • Dirt and lime resistant poppet and seat D TemperingValves • Minimum Hot Water Supply Temperature: design H 5°F (3°C) Above Set Point • Vandal-resistant locking mechanism to E • Temperature Adjustment Range: secure temperature setting. B J 90°F - 180°F (32°C - 82°C) For additional information, A request literature ES-N170-M3. C

MODEL BODY CHECK BODY DIMENSIONS WEIGHT INLETS STOP OUTLET NPT INLETS NPT A B C DE F GH J NPT in. mm in. mm in . mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. 1 1 7 5 7 15 3⁄4 N170-M3 3⁄4 N/A 3⁄4 N/A 4 ⁄2 114 N/A 3 ⁄2 89 N/A 1 ⁄16 36 3 ⁄8 92 4 ⁄8 124 2 ⁄16 75 4.8 2.2 1 7 1 13 7 5 7 15 3⁄4 N170-M3 CSUT N/A 3⁄4 3⁄4 91⁄4 235 4 ⁄2 114 11 ⁄16 291 3 ⁄2 89 1 ⁄16 46 1 ⁄16 36 3 ⁄8 92 4 ⁄8 124 2 ⁄16 75 9.8 4.5 1 N170-M3 1 N/A 1 N/A 49⁄16 116 N/A 31⁄2 89 N/A 17⁄16 36 35⁄8 92 47⁄8 124 215⁄16 75 4.8 2.2 1 9 9 1 13 7 5 7 15 1 N170-M3 CSUT N/A 3⁄4 1 10 ⁄8 264 4 ⁄16 116 12 ⁄16 319 3 ⁄2 89 1 ⁄16 46 1 ⁄16 36 3 ⁄8 92 4 ⁄8 124 2 ⁄16 75 10.3 4.9 1 7 1 1 1 11⁄4 N170-M3 11⁄4 N/A 11⁄4 N/A 6 ⁄16 154 N/A 3 ⁄16 87 N/A 13⁄4 44 31 ⁄16 94 5 ⁄4 133 4 ⁄2 114 9.4 4.3 1 1 1 7 1 1 1 11⁄4 N170-M3 CSUT N/A 11⁄4 11⁄4 12 ⁄16 306 6 ⁄16 154 15 ⁄16 383 3 ⁄16 87 2 ⁄2 64 1 44 31 ⁄16 94 51⁄4 133 4 ⁄2 114 19.3 8.8 1 1 1 7 1 1 1 11⁄2 N170-M3 1 ⁄2 N/A 1 ⁄2 N/A 6 ⁄16 154 N/A 3 ⁄16 87 N/A 13⁄4 44 31 ⁄16 94 5 ⁄4 133 4 ⁄2 114 9.1 4.1 1 1 1 7 1 1 1 1 ⁄2 N170-M3 CSUT N/A 11⁄4 1 ⁄2 131⁄4 337 6 ⁄16 154 161⁄4 413 3 ⁄16 87 2 ⁄2 64 13⁄4 44 31 ⁄16 94 51⁄4 133 4 ⁄2 114 19.8 9.0 2 N170-M3 2 (Hot) 11⁄2 (Cold) N/A 2 N/A 67⁄16 164 N/A 33⁄16 81 N/A 21⁄16 52 37⁄8 98 53⁄8 137 41⁄2 114 10.4 4.7 7 3 1 1 7 1 2 N170-M3 CSUT N/A 11⁄4 2 133⁄4 349 6 ⁄16 164 163⁄4 425 3 ⁄16 81 2 ⁄2 64 2 ⁄16 52 3 ⁄8 98 53⁄8 137 4 ⁄2 114 21.3 9.7 112 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com • • (0.5° – 82°C) – (0.5° 180°F – 33° Temperature Range: bar). (10.3 150psi Pressure: Working Maximum • Specifications listed IAPMO and 1010 ASSE Standards Sizes Specifications Mini Water Hammer Arrestors WaterHammer Mini • Residential and light commercial applications commercial light and Residential • hammer water Controls • 05 Series Water Hammer Arrestors WaterHammer • Controls water hammer water Controls • 150A Series chamber air Pre-charged • angle any at Installed • cap and piston Brass • O-rings and seals EPDM • body Copper • pressureoperating bar) (10.3 150psi • Features applications industrial and Commercial • hammer water Controls • 15 Series Water Hammer Arrestors WaterHammer 1 1 NPT 3 1 2" 1" 1 1 ⁄ ⁄ 4 2 ⁄ ⁄ 2 4 " " Shock Pressure: 200psi (13.8 bar) (13.8 Pressure:200psi Shock Maximum fps. Velocity:10 Maximum (10.3 bar) (10.3 Pressure:150psi Working Maximum " " CONNECTIONS 3 ⁄ 8 " – " 3 ⁄ 4 " (10 – 20mm). – (10 " mm 40 32 50 25 20 15 For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For ( ( 3 1 ⁄ ⁄ 8 2 " – " " – 2") – " 60 60 60 60 60 60 psi ( 1 3 ⁄ 2 ⁄ AIR PRELOADAIR 4 " – " ") 3 ⁄ 4 ") 413.7 413.7 413.7 413.7 413.7 413.7 kPa washing machines washing for connection threaded hose with 150A – 150A Models 150A-HA – 150A-HA • Factory air charged, permanently charged, air Factory • locations concealed in installed be May • adapter brass hex solid NPT • capped and epoxy sealed epoxy and capped Straight Models Straight TeeModels MODEL SIZE (DN) CONNECTION TYPE CONNECTION (DN) SIZE MODEL TYPE CONNECTION (DN) SIZE MODEL 05-PEX-T 05-PEX-T 05-CXT 05-CXT 05-C-T 05-C-T 05-C 05-S 05-S 05H-M1 05-H 05-CPVC 05 05 Size Size 1 ⁄ 2 PDI Standard PDI " (15mm) " CROSS REF.CROSS 1 3 5 3 3 1 5 3 1 3 3 1 1 3 3 nmm in mm in ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 2 8 8 8 8 4 8 4 2 4 4 2 2 8 4 D C B A E F " (20mm), " 5PEX PEX 15 Comp.x OD 10 Comp.x OD 16 Comp. OD 10 10 Comp. OD Sweat Sweat Hose 16 Hose 20 CPVC 15 NPT 20 NPT 20 15 15 10 8 OD Comp. OD 8 Reverse Comp.Nut Reverse Comp.Nut Reverse FIXTURES 155-330 114-154 61-113 33-60 12-32 1-11 Units certified, Listed by IAPMO by Listed certified, and approved WH201 PDI approved, 112.26.1M ANSI and 1010 ASSE Standards • rechargeableair-charged,not Factory • ES-05. literaturerequest information, additional For location concealed in installed be May • Features literature ES-150A. literature request information, additional For Rechargeable • diaphragm Sealed-in • chamber air Pre-charged • Features ES-15. literaturerequest information, additional For Installedwith standard pipe tee at any angle with access panels access with 05H-M1 05C 15 05H 150HA 113 Plumbing Specialties 12 A2-LS A2C-M1 DWB Contains A2-Intellitimer Contains the " (15mm) ell solder 2 ⁄ 1 Size Models 2M2 DWB – information, For additional PG-LR. literature request connections for concealed piping 2M2 DWB Rough-In Kit – components to rough-in and test piping and drain system 2M2 DWB-Finish Kit Series 2-M2 Duo-Cloz washing machine water shutoff valve and finish trim For additional information, request literature F-IntelliFlow. ") 2 ⁄ 1 ( TM ") 2 ⁄ 1 ( the Watts the Duo-Cloz™ Watts valve in one complete package adjustable stud mounting brackets Features • Replaceable seats and internal strainer • Ease of installation • Includes leak sensor Features • Decorative look and the convenience of • Easy to install. Complete with • Supplied with water test pressure plugs " (15mm), includes 2 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com ⁄ 1 " (15mm) Installation Kit " (15mm), connections " or 2" drain piping 2 2 2 ⁄ ⁄ Used in conjunction with ⁄ 1 1 1 " (15mm) Installation Kit 2 " (15mm) Installation Kit ⁄ Size: 2 1 ⁄ 1 Size Size: Size Size Leak sensor

Maximum Pressure: Maximum 150psi Pressure: (10.3 bar) 180°F (82°C) Maximum Temperature: Includes A2-LS leak sensor eliminating water on pressure the supply hoses when machine is not in use; prevents disastrous flooding from burst hoses hoses to the appliance water damage KA2C-BD- A2-LS- A2-IntelliTimer- Intelliflow Watts in 220 power VAC applications. (Purchased separately) KA2-R- A2C-M1 – Models • Automatically closes water supply valves when washing machine shuts off thus virtually Series A2C-M1, IntelliFlow Automatic Machine Washing Shutoff Valve Specifications Maximum Working 150psi Pressure: (10.3 bar) Maximum Working Temperature: 180°F (82°C) • Includes A2-LS leak sensor A2CWB-M1 – recessed recessed wall box • • • KA2-A – • Allows hot and cold water to flow through the washing machine supply Includes Watts Includes Series Watts 2-M2 Machine Washing shutoff Valve • Features a decorative white faceplate which can be painted or papered to match wall deco wall match to papered or painted be can •which faceplate white decorative a Features • Used to manually eliminate water on pressure supply hoses and prevent catastrophic DuoClozure™ Wall DuoClozure™ Box Wall Series Series DWB • Side or top water supply piping • Supplied with water test pressure plugs • Connects to 1

12 Plumbing Specialties 114 • Controls both hot and cold water simultaneously water cold and hot both Controls • Maximum Temperature:Maximum (82°C) 180°F bar) (10.3 Pressure:150psi Maximum Specifications prevents and hoses supply pressureon water eliminates valve Manual • 2-M2 Series Duo-Cloz™ Washing Machine Water Shutoff ValveWaterShutoffWashing Machine Duo-Cloz™ • Can be painted or wallpapered or painted be Can • requiredmeasurements exact No • 15" x 15" to 6" 5"x from hole shape size any fit to 15" x 15" or Two9" 9"x sizes • pumps spa and cables wires, plumbing, Conceals • Panels Access SpringFit APU Series catastrophic water damage water catastrophic For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For ( 1 ⁄ 2 ") with two-way male connectors male two-way with adapter dual copper solder and threaded 2T-M2,2T-M2SC – – 2-M2SC Models Satin chrome finish chrome Satin Size 1 ⁄ 2 " (15mm) " request literature ES-SpringFit. literaturerequest information, additional For • May be used with Model 05H and Model and 05H Model with used be May • construction body Bronze • on-off lever Single • Features request literature ES-2-M2. literaturerequest information, additional For 150A-HA water hammer arrestors hammer water 150A-HA 2-M2 APU 115 Plumbing Specialties 12 A200 BD-1C For additional information, information, For additional ES-A200. literature request For additional information, request literature ES-BD. " 4 ⁄ 3 " (20mm) hose 4 ⁄ 3 " (20mm) female IPS x 4 ⁄ " (15mm) straight pattern, " (20mm) straight pattern, 3 2 4 ⁄ ⁄ " (20mm) hose thread 1 3 4 ⁄ seat and disc 3 ® Size: Size: Size: ") 4 ⁄ 3 Features • twice valve operates cycle flow Complete • Built-in air gap • Bronze body • Celcon thread thread connection BD6 – solder or male IPS x male IPS x connection (20mm) hose thread connection, angle pattern BD5 – BD4F – " x 4 ⁄ 3 " 4 ⁄ " 3 ", 4 ⁄ 4 3 ⁄ " 4 3 ⁄ ") 3 2 ⁄ 1 ( " x 2 ⁄ 1 ( " (20mm) hose 4 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com ⁄ 3 " (15mm), " (15mm), 2 " (20mm) male IPS x 2 " (15mm) female IPS x ⁄ ⁄ " (15mm) dual connection, 4 2 1 ⁄ 1 2 ⁄ ⁄ 3 1 " (20mm) male IPS x 1 4 ⁄ 3 Size: Size: Size Size: Size: Size

" (20mm) Hose thread connection on outlet 4 ⁄

(13.8 bar) WOG 180°F (82°C) 3 Models A200T – solder ends threaded threaded ends A200S – thread thread connection, angle pattern BD2 – (20mm) hose thread connection, angle pattern BD3F – solder or male IPS x “Flow Through” Trap Primers “Flow Through” Trap Brass Boiler Drain Shutoffs for Service Water BD1C – • Maximum Working Temperature: Models Specifications • Maximum Working 200psi Pressure: Series BD •

• Assures delivery of water to floor drain traps to prevent evaporation of the water seal Series Series A200 (20mm) hose thread connection, angle pattern • Dual solder or IP connection models • Angle and straight pattern models (20mm) hose thread connection, angle pattern BD2C –

12 Plumbing Specialties 116 Quarter-turn Brass Boiler Drain Shutoffs for WaterService for Shutoffs Drain Boiler Quarter-turnBrass (65 – 450mm), 1" (25mm) male IPS or IPS male (25mm) 1" 450mm), – (65 (20mm) female IPS inlet connections inlet IPS female (20mm) HY42 – HY42 Models Temperature: Maximum • Pressure:200psi Working Maximum • Specifications performance valve quarter-turnball of convenience and speed the provide to Designed • BD-QT Series • Residential and light commercial applications commercial light and Residential • • Automatic draining wall hydrant designed to blend with modern architecture modern with blend to designed hydrant wall draining Automatic • Preventer Backflow with Frost-proofWallHydrant HY42 Series • FHB Series designed with backflow preventer to prevent contamination of the potable the of contamination prevent to preventer backflow with designed Series FHB • (100 – 350mm), – (100 – FH-2-M1 1 1 350mm), – (100 – FH-1-M1 Models • supply water external for protectionfreeze provide to Designed • FHB FH, Series (100 – 350mm), – (100 – FH-1-M1-PEX inlet IPS male (15mm) Frost-proof Automatic Draining WallHydrants Draining Frost-proofAutomatic (100 – 350mm), – (100 – FHB-1-PEX 350mm), – (100 – FHB-1 • Commercial and industrial applications industrial and Commercial • ⁄ ⁄ 2 2 " (15mm) male IPS inlet IPS male (15mm) " inlet IPS female (15mm) " for boiler drain or sill cock applications cock sill or drain boiler for (13.8 bar) CWP bar) (13.8 water supply from either backsiphonage or backpressureor backsiphonage either from supply water 3 250°F (121°C) 250°F ⁄ 4 " (20mm) hose outlet provided with FH and FHB models FHB and FH with provided outlet hose (20mm) " Wall thickness sizes: 2 sizes: Wallthickness For wall sizes: 4" – 14" – 4" sizes: wall For Sizes: 4" – 14" – 4" Sizes: Sizes: 4" – 14" – 4" Sizes: Sizes: 4" – 14" – 4" Sizes: 1 1 3 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ Sizes: 4" – 14" – 4" Sizes: 2 2 4 2 2 " (15mm) PEX inlet PEX (15mm) " or copper (15mm) " or IPS male (20mm) " PEX (15mm) " inlet or copper (15mm) " For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 1 ⁄ 2 " – 18" – " ( 1 3 1 ⁄ ⁄ 2 ⁄ 4 2 " " x " " ( 1 ⁄ 2 " x " 3 ⁄ • Adjustable Teflon Adjustable • Tee-handlealuminum Rugged design • design valve Quarter-turnball • shutoff Positive • Available • • Features 4 • One piece valve plunger that controls that plunger valve piece One • surface seat EPDM Replaceable • body valve Brass • Features • Chrome on brass exterior finish exterior brass on Chrome • casing pipe Brass • Tamper-resistanttee key operates hydrant • FHB-2 or • ASSE 1019 approved FHB models only models FHB approved 1019 ASSE • shutoff water seat Positive • automatically Self-drains • Features 350mm), – (100 – FHB-2 (20mm)copper inlet or ") ( ") 1 Solder 3 on outlet on flow and drainage and flow 1 ⁄ ⁄ 4 ⁄ 2 2 " (20mm) Hose thread connection thread Hose (20mm) " " (15mm) female IPS inlet IPS female (15mm) " ", 3 ⁄ 4 3 " x " ⁄ 3 4 ⁄ For wall sizes: 4" – 14" – 4" sizes: wall For – 4 " x " For wall sizes: 12" (300mm), 12" sizes: wall For 3 ⁄ 3 4 " x " ⁄ 4 ") 1 3 3 ⁄ ⁄ 2 4 ⁄ 4 " (20mm) male IPS male (20mm) " ", " (20 x 20mm) MIP or MIP 20mm) x (20 " ® stem packing stem 3 3 ⁄ ⁄ 4 4 " x " " (20mm)" male IPS 3 ⁄ 4 ") 3 ⁄ 4 " requestliterature ES-HY42. Foradditional information, HY42 Box – Box HY42 requestliterature ES-BD-QT. additionalFor information, requestliterature ES-FH or ES-FHB. Foradditional information, mounting box available box mounting FH-1-M1-PEX FHB-1-PEX 3 ⁄ 4 " BD-QT " FHB-1 HY42 117 Plumbing Specialties 12 SC8-2 SC8-4 SC8-5 SC-1 SC-3 SC-6 For additional information, request literature ES-SC or ES-SC8. " 4 ⁄ 3 " (20mm) 4 ⁄ 3 " 4 ⁄ 3 " (20mm) hose end hose (20mm) " 4 ⁄ 3 ") 4 ⁄ 3 ", 2 ⁄ 1 ( " (20mm) hose connections 4 ⁄ 3 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com " (15 or 20mm), female IPS inlet connection x 4 " (15 or 20mm), solder connection x x connection solder 20mm), or (15 " ⁄ 4 3 ⁄ 3 " (20mm) male IPS " or " (15mm) male IPS or solder inlet connection x " (20mm) no kink hose solder connection x " (15mm) no kink hose faucet dual inlet connection " or or "

4 2 2 4 2 ⁄ ⁄ ⁄ ⁄ ⁄ 2 ⁄ 3 1 3 1 1 1

Same as SC-2, except with vacuum breaker Same as SC-1, except with vacuum breaker Same as SC-4, except with vacuum breaker Same as SC-5, except with vacuum breaker Same as SC-6, except with vacuum breaker Same as SC-3, except with vacuum breaker Size: Size: Size: Size: Size: Size: Size:

• Hose bibb type faucets with tee handle or handwheel Series Series SC, SC8 Sill Cock Faucets (20mm) hose connection SC8-2 – SC-2 – (male IPS or solder) SC8-1 – (20mm) hose SC8-4 – Hose Bibb Hex Shoulder Handle Sillcock with Tee SC-5 – Lawn Faucet Sillcock with Cast Iron Handwheel SC-3 – Models Handle Sillcock Tee SC-1 – Specifications CWP. bar) • (8.6 125psi Pressure: Working Maximum hose SC8-5 – SC-6 – SC8-6 – SC8-3 – SC-4 –

12 Plumbing Specialties 118 Stop and waste valves waste and Stop MaximumTemperature: 80°F (27°C) • Pressure:150psi Working Maximum • Specifications service only shutoff for or shutoffs waste and stop as Available • SW,Series SS Stop and Waste Shutoff ValvesWasteShutoff and Stop • Mixes hot water with cold supply water to avoid condensation build up on the outside of outside the on up build condensation avoid to water supply cold with water hot Mixes • WAS Series Anti-sweat Valve for WaterValveClosets for Anti-sweat • Specifications feature waste with connections 20mm) x (20 WAMV-W– 3 – WAMV Models service supply water incoming commercial light or residential For • WAMV Series (20 x 20mm) connections. Size 1" flare x flare 1" Size connections. 20mm) x (20 Maximumpressure 125psi (9 bar) (25x 20mm) connections with waste feature. WAMV-W– Brass Angle Meter ValvesMeter Angle Brass ⁄ 4 " female IPS (25 x 20mm) connections 20mm) x (25 IPS female " (10.3 bar) WOG bar) (10.3 the water closet water the Maximum Temperature:Maximum (82°C) 180°F Size Size:1" flare x Size: 3 ⁄ 4 " flare x flare " 3 ⁄ 4 " flare x flare " For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 3 3 ⁄ 4 ⁄ 4 " female IPS female " "female IPS 3 ⁄ 4 " female IPS female " ( 1 ⁄ 2 ") ( 3 ( 3 ⁄ 4 ⁄ 8 " x " " – " 3 3 ⁄ 4 ⁄ WAS – WAS Models ends or IPS male connections male IPS or ends female connections with cross style handle style cross with connections female SS – SS valves only Stop connections female SWC – SWC connections solder SWT – SWT ends pression ST-C– connections female ST – ST ends pression SSC – SSC connections SWS – SWS Models • With or without waste feature waste without or With • brass Cast • Features 4 ", 1" x 1" ", ") Sizes: Sizes: Sizes: Sizes: Size Sizes: Sizes: Sizes: 3 ⁄ 1 1 1 4 ⁄ ⁄ 2 2 ⁄ ") 2 1 ", ", 1 3 1 " (15mm), compression (15mm), " 1 ⁄ ⁄ 2 ⁄ ⁄ ⁄ 2 8 2 2 ", ", 3 ", 3 ", ", ⁄ ⁄ 4 4 3 " (15, 20mm) NPT 20mm) (15, " " (15, 20mm) solder 20mm) (15, " 3 1 3 3 ⁄ ⁄ 4 ⁄ ⁄ ⁄ 4 2 4 4 " (15, 20mm) com- 20mm) (15, " " (15, 20mm) NPT 20mm) (15, " ", " (15, 20mm) NPT 20mm) (15, " " (15, 20mm) com- 20mm) (15, " 3 ⁄ 4 " (10, 15, 20mm) 15, (10, " ES-SS or ES-SW.or ES-SS literaturerequest information, additional For request literature ES-WAS.literaturerequest information, additional For request literature ES-WAMV.literaturerequest information, additional For WAMV WAS SWC 119 Plumbing Specialties 12 CX 500 PX 500TO ST-750 ST-1500 For additional information, request literature F-FV. For additional information, request literature F-FV. For additional information, request literature F-FV. High High capacity " – – " 2") 8 ⁄ 3 ( Maximum Temperature: 140°F (60°C) Maximum Temperature: valve that can be tank wall-mounted. Inlet side has a machined flange and is female NPT pipe threaded for inlet connection and male straight-pipe threaded for locknut Threaded Outlet (500TO, 750TO) – capacity valve with same inlet feature as standard valve, with MNPT thread on the outlet. Like the standard valves, this valve can be tank wall-mounted. Maximum 165psi Pressure: (11.4 bar) 180°F (82°C) Maximum Temperature: Non-Threaded Non-Threaded Outlet – Plastic • resistant corrosion highly Non-electrolytic, • Unaffected by salts and caustic fluids • All injection molded • (PX, P1, P6 through P8, P12 and P16) and P12 P8, through P6 P1, (PX, " – 2") 8 ⁄ 3 ( Bronze Bronze body with Bronze Bronze body with MNPT For assistance, contact your local authorized agent Watts or visit our website at www.watts.com

" – 2" (32 – 50mm) –

4 ⁄ " – 1" (10 – 25) – 1 8

⁄ Maximum Working Pressure: 125psi (8.6 bar) 180°F (82°C) Maximum Temperature: Maximum Temperature: 200°F (93°C) Maximum Temperature: straight-pipe straight-pipe threaded for locknut tank wall of water level and short arms 3 threaded threaded inlet and outlet 1 female NPT inlet-open outlet (lead free solder) • Pipe-threaded for pipe connections and • Machined flange for support against • All bronze body construction • Serrated arms for quick easy adjustment • High tensile manganese bronze long • No jam single lever action • Replaceable seals 1500, 1500, 2000 Series Series 375, 500, 750, 1000, 1250, Heavy Duty Mechanical Float Valves for Controlling Water Flow Water Controlling for Valves Float Mechanical Duty Heavy Standard Standard Duty Mechanical Float Valves for Controlling Flow Water • No jam single lever action • Replaceable seals. • Cotter pin pivot arm assembly • Replaceable plungers • • • ST1250, ST1500, ST2000 ST2000 ST1500, ST1250, Series ST375, ST500, ST750, ST1000, ST750, ST500, ST375, Series

• Heavy Duty Floats (CX, C4 through C8, C10 and C12) • High grade copper construction • Firmly bonded overlapping joints • Copper

12 Plumbing Specialties 120 • Polyethylene float Polyethylene • arms brass Adjustable • seals Buna-N • in-seat Machined • Body Brass ValvesTubeCooler Mini Fitting • Maximum Temperature: Maximum (60°C) 140°F • Pressure:100psi Working Maximum • float Polyethylene • arms brass Adjustable • seals N Buna • in-seat Machined • Specifications Body Bronze ValvesCooler Duty Heavy • Consists of RL600V nozzle and arm and nozzle RL600V of Consists • • RL600 plus universal tank adapter (No. adapter tank universal plus RL600 • Automatic Livestock WateringKits Livestock Automatic RL600 •1 Rubbermaid on use For float. P6 and assembly chain assembly,and stem RL600SC inlet. threaded FNPT (15mm) UA600) for use in all livestock tanks. livestock all in use for UA600) (6.7 bar) (6.7 1 ⁄ 4 " (32mm) MNPT threaded with threaded MNPT (32mm) " ® brand livestock tanks. livestock brand For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 1 ⁄ 2 " Durable • freezing Resist • proof Animal • installations Easy • capacity High • Features M Models pression inlet connection inlet pression M connection inlet sion pression inlet connection inlet pression C connection pipe ID FIP (3mm) STD-CA – STD-CA Model C connection inlet pression C connection inlet sion 1 1 3 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ 4 4 8 4 4 TFAEA– – TF-1 – TF TFSS – TFSS – TF 3 1 ⁄ ⁄ 8 4 " (10mm) copper tube compres- tube copper (10mm) " 1 " (8mm) copper tube compres- tube copper (8mm) " 3 ⁄ ⁄ 1 4 8 ⁄ " (8mm) copper tube com- tube copper (8mm) " " (10mm) MIP OD x OD MIP (10mm) " 4 1 " (8mm) copper tube com- tube copper (8mm) " ⁄ 4 " (8mm) copper tube com- tube copper (8mm) " 1 ⁄ 8 " request literature F-FV.literaturerequest information, additional For request literature F-FV.literaturerequest information, additional For request literature F-FV.literaturerequest information, additional For M STD-CA 1 RL600 ⁄ 4 "FSS 121 Plumbing Specialties 12 3002 3100 lbs. kgs. Installation Kit Bolt Insulators – 15162022 100 100 100 100 1.75 1.75 .8 2 .8 2 .9 .9 for insulating flange bolts – EPDM gasket for use in steam or hot factory certified to withstand a minimum of 600 volts on a dry line with no flashover designed and manufactured to the highest quality standards both tensile strength and thread end connections BOLT SIZEBOLT QTY./CARTON WEIGHT 2 8 4 8 ⁄ ⁄ ⁄ ⁄ 1 5 3 7 in. in. mm • All dielectric unions individually • dielectric Watts fittings/unions are Optional Gasket add Suffix: GB – water applications up to 300°F (149°C) at 50psi (3.4 bar) Features • Meets federal specifications for " (15 x 10, 20 x 15, 25 x 20mm), 4 ⁄ 3 " – 4") 2 ⁄ 1 " (15 x 10mm – 20 x 15mm), male iron ( 2 ⁄ ", 1" x 1 2 ⁄ 1 " x 4 ⁄ " x 3 4 ⁄ 3 " (15 – 20mm), male iron pipe thread to solder solder to thread pipe iron male 20mm), – (15 " For assistance, contact your local authorized agent Watts or visit our website at www.watts.com " – ", 4 ⁄ 8 8 ⁄ ⁄ 3 3 3 " – 2" (15 – 50mm), female iron pipe thread to " – 4" (65 – 100mm), solder copper fitting, bronze " – – " 2 " – 1" (15 – 25mm), female brass pipe thread to female 2 ⁄ ⁄ 2 " – 2" (15 – 50mm), female iron pipe thread to female " x " x " – 2" (15 – 50mm), female iron pipe thread to female " – 2" (15 – 50mm), female iron pipe thread to female 2 ⁄ 1 1 ⁄ 2 2 2 2 2 1 ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 1 1 1 Sizes Sizes Sizes Sizes Sizes Sizes Sizes Sizes Sizes 2" – 4" (50 – 100mm), iron pipe thread to copper solder joint Sizes 2 Sizes 2" – 4" (50 – 100mm), iron pipe thread to iron pipe thread Sizes

Supplied with oil, GA natural gaskets gas, air, suitable gasoline, for propane, water, kerosene, mineral oil and alkalies. For other applications, consult factory Dielectric Unions are rated to 180°F (82°C) at 250psi (17.2 bar) conforming to ANSI B16.39. Pipe threads are in accordance with ANSI B2.1 Dielectric Flange Fittings are rated at 175psi (12.1 bar) conforming to B16.42 (iron), B16.24 (bronze) Gray ASTM ...... Iron. A48-83 Malleable Iron Parts ASTM ...... A197-79 Steel Parts . ASTM ...... A108 Brass Parts. . ASTM ...... B16 Bronze Parts. ASTM ...... B584 Zinc Parts . . ASTM ...... B633-85 Insulators #1425 Watts ...... Standard Gasket A . Buna ...... connection 3006 – Dielectric Dielectric Unions/Fittings pipe thread to female solder connection 3008 – iron iron pipe thread (black) 3007 – female iron pipe thread to reduced solder connection. 3003 – solder connection. Flanged Fittings 3100 – 3110 – brass pipe 3004 – iron pipe thread (galvanized) – 3005A (125 class flange) 3200 – For additional information, request literature F-3000. 3001A – Models Standards Unions meet the of requirements ANSI B16.39, including hydrostatic strength, tensile strength and air testing. pressure Flange fittings conform to B16.42 (iron), B16.24 (bronze). All pipe threads are in accordance with ANSI B2.1 and solder joints meet national plumbing standards. • • • • • Specifications • Protects against destructive effect of galvanic and stray current corrosion • For residential, commercial and industrial applications Series Series 3000 solder connection 3002 –

13 Dielectric Unions 122 FLANGED FITTINGS FLANGED 3002 3001A 3200 3200 3200 3110LF 3110 3110 3100 3008 3007 3006 3006 3006 3005A 3004 3004 3004 3003 3003 3003 3002 3001A 3001A 3001A 3001A MODEL 3200 3110LF 3110LF 3110 3100 3100 3100 3004 3004 3003 3003 3003 3002 3001A 3008 3008 3007 3006 3006 3006 3005A 3004 3 1 3 1 1x ⁄ ⁄ ⁄ ⁄ 4 2 4 2 1 2 1 1 1 1 2 2 2 1 1 1 For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 3 1 3 1 3 1 3 1 3 1 3 1 n mi.m n mo.gm. oz. mm in. mm in. mm in. 0 9 6 100 5 80 6 50 4 3 9 80 2 100 3 6 4 80 3 52 25 1 2 25 1 2 25 1 3 50 2 0 9 100 6 4 9 80 100 5 3 50 4 2 04 50 2 1 25 1 51 25 4 1 50 2 4 50 2 x x x x 1 1 1 1 1 1 1 1 1 1 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 4 2 4 2 4 2 4 2 4 2 4 2 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 3 2 2 2 2 2 4 2 4 2 4 2 4 1 3 1 3 ⁄ 4 ⁄ ⁄ ⁄ ⁄ SIZE (DN) SIZE 2 8 2 8 01 1 1 20x15 15x10 1 1 25x20 1 20x15 15x10 55 65 5 65 5 65 5 65 1 1 20 15 3 2 40 1 32 1 1 20 1 15 20 3 15 2 40 1 32 1 20 3 15 2 40 1 32 1 20 15 2 2 40 1 32 1 20 15 3 7 1 7 5 1 5 1 1 1 3 1 7 5 5 1 1 1 3 1 7 5 1 1 3 1 7 5 7 5 1 1 3 1 7 5 1 1 3 7 1 1 3 7 1 3 7 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 8 4 8 8 8 4 8 8 4 8 8 4 8 8 8 8 2 8 2 8 2 4 4 8 8 8 2 8 2 4 4 8 8 8 2 4 4 8 8 8 8 2 2 4 4 8 8 2 AB DIMENSIONS (APPROX.) DIMENSIONS 0 3 105 3 105 3 105 3 64614062 496 76 3 2 232 2 171 2 149 4 130 3 232 3 171 4 149 3 232 3 171 4 149 3 232 3 171 3 149 130 137 . 190 6.7 2 76 2 1 48 3 41 377 2 38 41 2 38 12.6 2 2 89 76 2 70 2 58 3 48 2 41 41 2 38 2 2 89 2 70 2 57 48 2 41 984 2 377 2 89 377 2 70 34.7 2 57 13.3 2 48 76 13.3 1 41 76 1 48 76 3 41 3 38 3 89 2 70 2 57 1 48 41 32 1 1 1 1 3 3 1 1 1 1 7 7 1 1 7 3 3 1 3 1 1 3 3 1 3 3 1 1 1 1 7 5 1 3 3 1 1 1 5 1 3 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 2 4 4 8 4 4 2 4 4 2 8 8 2 8 8 4 4 8 8 2 2 8 4 2 8 4 2 4 2 8 8 8 8 4 4 2 4 4 8 8 4 4 1 4 65 144 8165 111 288 13608 111 480 111 42. 567 417 190 20.0 1965 14.7 6.7 1366 64 757 57 69.3 567 57 48.0 417 79 26.7 190 70 20.0 303 70 14.7 190 6.7 64 190 57 10.7 6.7 57 6.7 64 48 264 48 190 170 9.3 6.7 6.0 64 54 48 41. 417 303 190 14.7 10.7 190 6.7 64 1814 54 6.7 1284 48 757 64.0 567 67 45.3 417 79 26.7 190 70 20.0 70 14.7 244 6.7 64 247 57 8.6 1276 57 757 8.7 67 45.0 79 26.7 70 70 0206804 5443 3629 240 192 54 44 70 128 70 54 120 96 6804 5443 89 89 240 6350 192 5443 95 3629 89 224 192 95 128 89 83 WEIGHT A B 123 Dielectric Unions 13 FS-CIC-S " (10mm) brass (10mm) " FS-CDC-S-FE 8 FS-CFC-S-CC ⁄ " (10mm) brass (10mm) " 3 8 ⁄ 3 Size: Size: National residential plumbing codes National residential plumbing codes National residential plumbing codes Delta Style Faucet Connector: – FS-CFC-S-CO OD compression end fitting end compression OD Maximum 125psi Pressure: (8.6 bar) (82°C) Maximum Temperature:180°F All hoses are NSF61 approved for safer drinking water. Note: the reference maximum operating temperature as 140°F (60°C). Plumbing fixtures are designed to ANSI-ASME A112 18.1 at 125psi (8.6 bar). For other applications requiring higher operating temperatures or please pressures, contact Regulator Watts Service at (978) Technical 689-6130. information, For additional ES-FS-CFC-S. literature request compression end fitting x x fitting end compression Note: the reference maximum operating temperature as 140°F (60°C). Plumbing fixtures are designed to ANSI-ASME A112 18.1 at 125psi (8.6 bar). For other applications requiring higher operating temperatures or please pressures, contact Regulator Watts Service at (978) Technical 689-6130. information, For additional ES-FS-CIC-S. literature request Maximum Pressure: Maximum 125psi Pressure: (8.6 bar) (82°C) Maximum Temperature:180°F Note: the reference maximum operating temperature as 140°F (60°C). Plumbing fixtures are designed to ANSI-ASME A112 18.1 at 125psi (8.6 bar). For other applications requiring higher operating temperatures or please pressures, contact Regulator Watts Service at (978) Technical 689-6130. information, For additional ES-FS-CDC-S. literature request " 8 ⁄ 3 " (15 x 2 ⁄ 1 " (15mm) brass " (15mm) brass 2 2 " (8 x 8mm) ⁄ ⁄ 4 " (15mm) brass " (10mm) brass " x 1 1 ⁄ " (15mm) brass nut brass (15mm) " 2 8 2 1 ⁄ ⁄ ⁄ 2 ⁄ 1 3 1 1 " x 4 ⁄ 1 Size: Size: Size: Size: Size: Size: ") ") 2 ⁄ 2 ⁄ 1 1 " – " – 8 ) ⁄ 8 brass compression end fittings Models FS-CIC-S – FS-CFC-S-FF – fine thread female end x fine thread female end x FIP thread fitting FS-CFC-S-TF – FIP thread fitting 15mm) brass FIP thread fittings FS-CFC-S-TF – " FS-CDC-S-FE – – FS-CDC-S-FE (10mm) compression end fitting with a brass a with fitting end compression (10mm) the to attached elbow thread pipe iron male fitting end compression female iron pipe (FIP) thread connector x x connector thread (FIP) pipe iron female ⁄ 3 4 3 ( ⁄ ( 1 ( " (10mm) 8 ⁄ 3 " (10 x 10mm) x (10 " 8 ⁄ " (15mm) brass " (15mm) brass " (15mm) 3 2 2 2 ⁄ ⁄ ⁄ 1 1 1 " (11mm) brass " (10mm) brass " (15mm) brass " (10mm) brass 8 ⁄ " x x " 16 2 8 ⁄ ⁄ ⁄ 8 3 ⁄ 7 1 3 3 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com Size: Braided Stainless Steel Size: Size: Size: Braided Stainless Steel Braided Braided Stainless Steel Size: Size: ® ® ® shutoff shutoff device protects against catastrophic water damage shutoff shutoff device protects against catastrophic water damage shutoff shutoff device protects against catastrophic water damage ® ® ®

Maximum Working 125psi Pressure: (8.6 bar) Maximum Working Temperature: 140°F (60°C) Ice Maker Connectors Connectors Maker Ice • Patented design • Requires no power source • PVC tubing jacketed with braided stainless steel • Available lengths: 6', 10', 20' FloodSafe Specifications •

• FloodSafe Series FS-CIC-S • • compression compression end fitting x compression end fitting x compression compression end fitting with a brass male iron pipe thread elbow attached to the compression end fitting FloodSafe FloodSafe brass nut compression end fittings end compression nut brass – FS-CFC-S-CF compression compression end fitting x Models – FS-CFC-S-CC

• FloodSafe Series FS-CFC-S Models FS-CDC-S-CE –

• FloodSafe Series Series FS-CDC-S female iron pipe (FIP) thread fitting – FS-CFC-S-CF FIP thread fitting – FS-CFC-S-CF brass FIP thread fitting nut compression end fitting x • Patented design • Requires no power source • PVC tubing jacketed with braided stainless steel • Superior resistance to vibration and bursting • Available lengths: 12", 16", 20" • Patented design • Requires no power source • Supplied with elbow fittings • PVC tubing jacketed with braided stainless steel • Superior resistance to chlorinated water • Available lengths: 48", 60", 72" Faucet Connectors Dishwasher Dishwasher Connectors

Flexible Connectors 14 124 • • Specifications compression end fitting x fitting end compression cock end fitting end cock – FS-CTC-S-CB fitting end cock • • Specifications FS-CTC-S-CB – FS-CTC-S-CB Models compression end fitting x fitting end compression Washing Machine Connectors WashingMachine FloodSafe • Requires no power source power no Requires • design Patented • • Available lengths: 48", 60", 72" 60", 48", lengths: Available • steel stainless braided with jacketed tubing PVC • pressuresurges vibration/extreme of effects destructive the to resistance Superior • capacity flow Full • FloodSafe • FS-CWM-S Series ToiletConnectors • Available lengths: 6", 9", 12" 9", 6", lengths: Available • steel stainless braided with jacketed tubing PVC • pressuresurges extremefrom damage Resists • supply water toilet for hook-up Superior • source power no Requires • design Patented • FloodSafe • FS-CTC-S Series FloodSafe caused by washing machine solenoid valves solenoid machine washing by caused (82°C) Temperature:Working Maximum 180°F (8.6 bar) (8.6 Pressure:125psi Working Maximum (82°C) TemperatureWorking Maximum 180°F bar) (8.6 Pressure:125psi Working Maximum ® ® shutoff device protects against catastrophic water damage water catastrophic against protects device shutoff shutoff device protects against catastrophic water damage water catastrophic against protects device shutoff ® ® Braided Stainless Steel Stainless Braided Braided Stainless Steel Stainless Braided Size: Size: For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 7 3 ⁄ ⁄ 16 8 " (10mm) brass (10mm) " 7 7 " (11mm) brass (11mm) " ⁄ ⁄ 8 8 " (22mm) ball- (22mm) " ball- (22mm) " ( 3 ⁄ FS-CWM-S-HH – FS-CWM-S-HH Models 20mm) female hose bibb connections bibb hose female 20mm) compression end fitting x fitting end compression FS-CTC-S-FB – FS-CTC-S-FB fitting end cock FS-CTC-S-CB – FS-CTC-S-CB end fitting end – FS-CTC-S-TB fitting end FS-CTC-S-TB – FS-CTC-S-TB fitting end ballcock (22mm) female iron pipe (FIP) thread fitting x fitting thread (FIP) pipe iron female fine thread FIP end x end FIP thread fine x end FIP thread fine 8 ( 3 " – " ⁄ 4 " x " 1 ⁄ 2 3 ") ⁄ 4 ") Size: Size: Size: Size: Size 7 7 ⁄ ⁄ 8 8 1 1 3 " (22mm) ballcock (22mm) " " (22mm) ballcock (22mm) " 1 ⁄ 3 ⁄ ⁄ ⁄ 2 2 8 2 ⁄ " (15mm) brass (15mm) " 4 " (15mm) brass (15mm) " brass (10mm) " " (15mm) brass (15mm) " 7 " x " ⁄ 8 " (22mm) ball- (22mm) " 3 ⁄ 4 " (20 x (20 " 7 ⁄ 8 " by national plumbing codes. plumbing national by requiredpressureas system Maximum kPa) (551.6 80psi the to accurate is Performance requirement.)this meets pressuresupply (TypicallykPa) (206.9 30psi operation. shutoffproper requiredfor is connection supply the at minute per Note: ES-FS-CWM-S. additionalFor information, request literature 689-6130. Technical(978) at Service WattsRegulator contact pressures,please or temperatures operating higher requiring applications other For bar). (8.6 125psi at 18.1 A112 ANSI-ASME to designed arefixtures Plumbing (60°C). 140°F as ture tempera- operating maximum referencethe Note: requestliterature ES-FS-CTC-S. additionalFor information, 689-6130. Technical(978) at Service WattsRegulator contact pressures,please or temperatures operating higher requiring applications other For bar). (8.6 125psi at 18.1 A112 ANSI-ASME to designed arefixtures Plumbing (60°C). 140°F as ture tempera- operating maximum referencethe Note: codes. plumbing national by requiredpressureas system Maximum kPa) (551.6 80psi the to accurate is Performance requirement.)this meets pressuresupply (TypicallykPa) (206.9 30psi operation. shutoffproper requiredfor is connection supply the at minute per Note: A minimum flow rate of 2.5 gallons 2.5 of rate flow minimum A National residential plumbing codes plumbing residential National National residential plumbing codes plumbing residential National gallons 2.5 of rate flow minimum A FS-CWM-S-HH FS-CTC-S-FB 125 14 Flexible Connectors CDC-S-FE CFC-P-CF CFC-S-CC " (10mm) brass (10mm) " 8 ⁄ 3 " (10mm) brass fine " (15mm) brass FIP " (10mm) brass (10mm) " 8 2 ⁄ ⁄ 8 ⁄ 3 1 3 Size: Size: Size: National residential plumbing codes National residential plumbing codes National residential plumbing codes Note: the reference maximum operating temperature as 140°F (60°C). Plumbing fixtures are designed to ANSI-ASME A112 18.1 at 125psi (8.6 bar). For other applications requiring higher operating temperatures or please pressures, contact Regulator Watts Service at (978) Technical 689-6130. information, For additional ES-CFC-P. literature request thread thread FIP fitting x thread thread fitting CFC-P-TF – Delta Style Faucet Connector: – CFC-S-CO OD compression end fitting end compression OD Maximum 125psi Pressure: (8.6 bar) (82°C) Maximum Temperature:180°F All hoses are NSF61 approved for safer drinking water. Note: the reference maximum operating temperature as 140°F (60°C). Plumbing fixtures are designed to ANSI-ASME A112 18.1 at 125psi (8.6 bar). For other applications requiring higher operating temperatures or please pressures, contact Regulator Watts Service at (978) Technical 689-6130. information, For additional ES-CFC-S. literature request Maximum Pressure: Maximum 125psi Pressure: (8.6 bar) (82°C) Maximum Temperature:180°F Note: the reference maximum operating temperature as 140°F (60°C). Plumbing fixtures are designed to ANSI-ASME A112 18.1 at 125psi (8.6 bar). For other applications requiring higher operating temperatures or please pressures, contact Regulator Watts Service at (978) Technical 689-6130. information, For additional ES-CDC-S. literature request compression end fitting x x fitting end compression " 8 ⁄ 3 " (15mm) brass 2 ⁄ " (15 x 15mm) " (15 x 15mm) 1 2 2 ⁄ ⁄ 1 1 " (15mm) brass FIP " (15mm) brass FIP " (15mm) brass FIP 2 ⁄ " (11mm) brass 2 2 ⁄ ⁄ 1 " (15mm) brass com- " (15mm) brass nut brass (15mm) " " (15mm) brass fine " (10mm) brass fine " x " (15mm) brass fine " x 1 1 " (15mm) brass FIP 16 2 2 2 8 2 2 2 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 2 ⁄ ⁄ ⁄ 1 7 1 1 3 1 1 1 1 Size: Size: Size: Size: Size: Size: Size: Size: Size: ") ") CDC-S-FE – – CDC-S-FE (10mm) compression end fitting with a brass a with fitting end compression (10mm) the to attached elbow thread pipe iron male fitting end compression female iron pipe (FIP) thread connector x x connector thread (FIP) pipe iron female ") thread thread fitting CFC-S-TF – thread fitting brass FIP thread fittings CFC-S-TF – CFC-S-FF – thread thread female end x thread female end x 4 CFC-P-CF – FIP thread fitting CFC-P-FF – brass FIP thread fittings CFC-P-TF – pression pression end fitting x thread thread FIP fitting x thread thread fitting thread thread fitting CFC-P-CF – compression compression end fitting x ⁄ 2 2 ⁄ ⁄ 3 1 1 " – " – " – 8 ⁄ 8 8 ⁄ ⁄ 3 3 3 ( ( ( " (15mm) brass " (15mm) brass " (15mm) " (10mm) " (15mm) " brass (15mm) 2 2 2 8 " " (10 x 10mm) 2 ⁄ ⁄ ⁄ ⁄ ⁄ 8 1 1 1 3 " (10 x 10mm) x (10 " ⁄ 1 8 3 ⁄ 3 " (11mm) brass " (10mm) brass nut " " x For assistance, contact your local authorized agent Watts or visit our website at www.watts.com " (15mm) brass " (10mm) brass " (10mm) " brass (10mm) 8 " x x " 8 ⁄ 16 2 8 8 ⁄ ⁄ ⁄ ⁄ 8 ⁄ 3 ⁄ 3 7 1 3 3 3 Size: Size: Size: Size: Size: Size: Size: Size: Size: Size:

Maximum Working 125psi Pressure: (8.6 bar) Maximum Temperature: 140°F (60°C) Maximum Temperature: • Available lengths: 12", 16", 20", 24", 30", 36", 48", 60", 72" Flexible, Reinforced PVC Supply Water Connectors for Faucets

• PVC tubing jacketed with braided nylon and an outer protective layer of PVC • Resistance to the effects of vibration and bursting from extreme surges pressure Series CFC-P brass nut compression end fittings nut brass compression – CFC-P-CF Flexible, Braided Stainless Steel Supply Water Connectors for Faucets compression compression end fitting x brass nut compression end fittings end compression nut brass CFC-S-CF – Braided Braided Stainless Steel Supply Water Connectors for Dishwashers compression compression end fitting x female iron pipe (FIP) thread fitting pipe thread (FIP) iron female Models – CFC-P-CC • • Specifications Models – CFC-S-CC

• PVC tubing jacketed with braided stainless steel • Excellent for difficult installations involving misalignment of piping or cramped locations • Superior resistance to vibration and bursting • Available lengths: 12", 16", 20", 24", 30", 36", 48", 60", 72" Series CFC-S Models CDC-S-CE – • Supplied with elbow fittings • PVC tubing jacketed with braided stainless steel • Superior resistance to chlorinated water • Available lengths: 48", 60", 72" Series Series CDC-S female iron pipe (FIP) thread fitting CFC-S-CF – FIP thread fitting CFC-S-CF – brass FIP thread fitting compression compression end fitting with a brass male iron pipe thread elbow attached to the compression end fitting compression end fitting x end fitting compression compression compression end fitting x compression end fitting x • •

Flexible Connectors 14 126 Flexible, Reinforced PVC Water Supply Connectors for Toiletsfor Connectors WaterSupply PVC Reinforced Flexible, pression end fitting x fitting end pression CTC-P-CB – CTC-P-CB Models • • Specifications 20" 16", 12", 9", 6", lengths: Available • PVC of layer protective outer an and nylon braided with jacketed tubing PVC • toilet to supply water for hook-up Efficient • CTC-P Series cock end fitting end cock CTC-P-CB – CTC-P-CB fitting end compression end fitting x fitting end compression • • Specifications • • CIC-P Model forIce Makers Flexible,Reinforced PVC Water Supply Connectors • Available lengths: 6", 9", 12", 16", 20" 16", 12", 9", 6", lengths: Available • steel stainless braided with jacketed tubing PVC • pressuresurges extremefrom damage Resists • supply water toilet for hook-up Superior • CTC-S Series Connectors for Toiletsfor Connectors WaterSupply Steel Stainless Braided Flexible, compression end fitting x fitting end compression compression end fitting x fitting end compression cock end fitting end cock – CTC-S-CB fitting end cock CTC-S-CB – CTC-S-CB Models • • Specifications (60°C) Temperature:Working Maximum 140°F bar) (8.6 Pressure:125psi Working Maximum Available lengths: 6', 10', 20' 10', 6', lengths: Available PVC of layer protective outer and and nylon braided with jacketed tubing PVC 140°F (60°C) 140°F Temperature:Working Maximum bar) (8.6 Pressure:125psi Working Maximum (82°C) TemperatureWorking Maximum 180°F bar) (8.6 Pressure:125psi Working Maximum Size: Size: Size: Size: 7 3 7 3 ⁄ ⁄ ⁄ ⁄ 16 8 16 8 For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 7 " (10mm) brass com- brass (10mm) " " (10mm) brass (10mm) " ⁄ " (11mm) brass (11mm) " 8 " (11mm) brass (11mm) " " (22mm) ballcock (22mm) " 7 7 7 ⁄ ⁄ ⁄ 8 8 8 " (22mm) ball- (22mm) " " (22mm) ball- (22mm) " ball- (22mm) " ( 1 ( ( ⁄ 3 4 3 ⁄ " ⁄ 8 8 ) " – " " – " 7 1 ⁄ ⁄ 8 2 CTC-P-TB – CTC-P-TB fitting end CTC-P-FB – CTC-P-FB fitting CTC-P-CB – CTC-P-CB threadfitting x thread FIP fitting x fitting FIP thread x fitting (FIP) pipe iron female thread pression end fitting x fitting end pression CTC-P-TB – CTC-P-TB fitting end ballcock (22mm) CTC-S-FB – CTC-S-FB fitting end female iron pipe (FIP) thread fitting x fitting thread (FIP) pipe iron female thread FIP end x end FIP thread x end FIP thread CTC-S-CB – CTC-S-CB pression end fitting x fitting end pression CTC-S-TB – CTC-S-TB fitting end ballcock (22mm) fitting – CTC-S-TB fitting compression end fittings end compression CIC-P – CIC-P Models ") ") Size: Size: Size: Size: Size: 7 Size: Size: Size: Size: ⁄ 1 8 ⁄ "(22mm) ballcock end fitting 4 " x " 7 7 ⁄ ⁄ 8 8 7 1 " (22mm) ballcock end ballcock (22mm) " end ballcock (22mm) " 1 3 1 1 3 ⁄ 1 1 8 ⁄ ⁄ ⁄ ⁄ 1 ⁄ ⁄ ⁄ 2 ⁄ 2 8 2 2 8 " (22mm) ballcock end ballcock (22mm) " 2 2 ⁄ " (15mm) brass FIP brass (15mm) " " (15mm) brass fine brass (15mm) " fine brass (10mm) " " (15mm) brass (15mm) " 4 " (15mm) brass fine brass (15mm) " fine brass (10mm) " 7 7 " (15mm) brass com- brass (15mm) " " (15mm) brass com- brass (15mm) " " (8 x 8mm) brass 8mm) x (8 " ⁄ ⁄ 8 8 " (22mm) ballcock (22mm) " " (22mm) ballcock (22mm) " 7 7 ⁄ ⁄ 8 8 " " requestliterature ES-CTC-P. additionalFor information, 689-6130. Technical(978) at Service WattsRegulator contact pressures,please or temperatures operating higher requiring applications other For bar). (8.6 125psi at 18.1 A112 ANSI-ASME to designed arefixtures Plumbing (60°C). 140°F as ture tempera- operating maximum referencethe Note: requestliterature ES-CIC-P. additionalFor information, 689-6130. Technical(978) at Service WattsRegulator contact pressures,please or temperatures operating higher requiring applications other For bar). (8.6 125psi at 18.1 A112 ANSI-ASME to designed arefixtures Plumbing (60°C). 140°F as ture tempera- operating maximum referencethe Note: requestliterature ES-CTC-S. additionalFor information, 689-6130. Technical(978) at Service WattsRegulator contact pressures,please or temperatures operating higher requiring applications other For bar). (8.6 125psi at 18.1 A112 ANSI-ASME to designed arefixtures Plumbing (60°C). 140°F as ture tempera- operating maximum referencethe Note: National residential plumbing codes plumbing residential National National residential plumbing codes plumbing residential National National residential plumbing codes plumbing residential National CTC-P-CB CTC-S-FB CIC-P 127 14 Flexible Connectors CWM-S-HL CWH-S-FF-L " (20mm) brass FIP threaded " (20mm) brass FIP threaded 4 4 " (20mm) brass male iron pipe " male brass iron (20mm) ⁄ ⁄ 4 " (20mm) brass male iron pipe iron male brass " (20mm) 3 3 ⁄ 4 3 ⁄ 3 ") ") 4 ⁄ 8 ⁄ 3 7 " x " – 4 ⁄ 8 ⁄ 3 ( 5 ( " (22 x 22mm) compression end fittings " (20x20mm), brass female iron pipe (FIP) threaded ends 8 ⁄ 4 ⁄ 7 " (20 x 20mm) female hose bibb connections 3 " (20 x 20mm) female hose bibb connections with one 4 4 ⁄ ⁄ 3 3 " x " (20mm) brass FIP thread fitting x fitting thread FIP brass " (20mm) " (16mm) compression end fitting x " (22mm) compression end fitting x " x " (22mm) compression end fitting x end fitting " compression (22mm) 8 4 8 8 ⁄ 4 ⁄ ⁄ ⁄ 8 ⁄ ⁄ 7 3 5 7 " x 3 7 " x 4 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com 4 ⁄ ⁄ 3 3 Size: Size: Size: Size: Size: Size: Size: Size: Size Size

National residential plumbing codes the reference maximum operating temperature as National residential plumbing codes the reference maximum operating temperature as

Maximum Working 150psi Pressure: (10.3 bar) 180°F (82°C) Maximum Working Temperature: All hoses are NSF 61 approved for safer drinking water Maximum Working 125psi Pressure: (8.6 bar) 180°F (82°C) Maximum Working Temperature: caused by washing machine solenoid valves Flexible, Flexible, Braided Stainless Steel Heater Water Connectors CWM-S-HL – connection secured to a 90° elbow threaded fitting threaded threaded fitting threaded – CWHS-AM-L Note: Service at Regulator (978) Watts Technical 689-6130. ES-CWM-S. literature request information, For additional Models CWM-S-HH – 140°F (60°C). Plumbing fixtures are designed to ANSI-ASME A112 18.1 at 125psi (8.6 bar). Specifications • • • PVC tubing jacketed with braided stainless steel • Available lengths: 48", 60", 72" • Full flow capacity • Superior resistance to the destructive effects of vibration/extreme surges pressure Series CWM-S Note: 140°F (60°C). Plumbing fixtures are designed to ANSI-ASME A112 18.1 at 125psi (8.6 bar). For other applications requiring higher operating temperatures or please pressures, contact Service at Regulator (978) Watts Technical 689-6130. ES-CWH-S. literature request information, For additional CWH-S-FF-L – • • • Models Specifications •

• For connecting water heaters to the water supply • Protects against the destructive effects of system surges pressure • PVC tubing jacketed with braided stainless steel • Available lengths: 12", 15", 18", 24", 36", 48", 60" Series Series CWH-S Flexible, Braided Stainless Steel Machine Washing Water Supply Connectors CWH-S-FM-L – CWH-S-FM-L fitting CWH-S-AF-L – fitting CWH-S-AA-L – CWH-S-AF-L – For other applications requiring higher operating temperatures or please pressures, contact

Flexible Connectors 14 128 Bottom Entry PressureGauges Entry Bottom • • Available in dial sizes 2", 2 2", sizes dial in Available • DPG1 Series • Working temperature: -4°F to 176°F (-20°C to 80°C) to (-20°C 176°F to -4°F temperature: Working • requestliterature ES-DPG-1. additionalFor information, requestliterature ES-DPG-3. additionalFor information, Center Back Entry PressureGauges Entry Back Center • Working temperature -4°F to 176°F (-20°C to 80°C) to (-20°C 176°F to -4°F temperature Working • • Available in dial sizes 1 sizes dial in Available • DPG3 Series • 1 1 ⁄ ⁄ 4 8 " (8mm) NPT connection NPT (8mm) " ", 1 ⁄ 4 " (3, 8mm) NPT connection NPT 8mm) (3, " For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 1 ⁄ 2 ", 2", 2 2", ", 1 ⁄ 2 ", 3", 4" 3", ", (2" – 4") – (2" (1 1 1 ⁄ 2 ⁄ ", 3" ", 2 " – 3") – " DPG1-2 DPG3 DPG3-2 DPG3-2 DPG3-2 DPG3-2 DPG3-2 DPG3-2 DPG3-1 DPG3-2 DPG3-1 DPG1-4 DPG1-3 DPG1-2 DPG1-2 MODEL DPG1-2 DPG1-2 DPG1-2 DPG1-2 DPG1-2 DPG1-2 DPG1-4 DPG1-3 DPG1-2 DPG1-4 DPG1-3 DPG1-2 DPG1-4 DPG1-3 DPG1-2 DPG1-4 DPG1-3 DPG1-2 DPG1-4 DPG1-3 DPG1-2 DPG1-4 DPG1-3 DPG1-2 DPG1-4 DPG1-4 P333" 3" 3" 3" DPG3-3 3" DPG3-3 3" DPG3-3 3" DPG3-3 DPG3-3 DPG3-3 DPG3-3 2" 2" 2" 2" DPG3-2 2" DPG3-2 2" DPG3-2 2" DPG3-2 DPG3-2 DPG3-2 DPG3-2 MODEL 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 DIAL SIZE DIAL DIAL SIZE DIAL 2 2 2 2 2 2 2 1 1 2 2 2 2 2 2 2 4" 3" 2" 4" 3" 2" 4" 3" 2" 4" 3" 2" 4" 3" 2" 4" 3" 2" 4" 3" 2" 4" 4" 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 " " " " " " " " " " " " " " " " 0 – 300psi 0 – 2069 kPa 2069 – 0 kPa 1379 – 0 kPa 1103 – 0 kPa 689 – 0 kPa 413 – 300psi 0 – 0 kPa 207 – 200psi 0 – 0 kPa 103 – 160psi 0 – 0 100psi – 0 60psi – 0 30psi – 0 15psi – 0 kPa 1103 – 0 kPa 413 – 0 160psi – 0 60psi – 0 0 – 300psi 0 – 2069 kPa 2069 – 0 kPa 1379 – 0 kPa 1103 – 0 kPa 689 – 0 kPa 413 – 300psi 0 – 0 kPa 207 – 200psi 0 – 0 kPa 103 – 160psi 0 – 0 100psi – 0 60psi – 0 30psi – 0 15psi – 0 kPa 2069 – 0 kPa 1379 – 0 kPa 1103 – 0 kPa 689 – 0 kPa 413 – 300psi 0 – 0 kPa 207 – 200psi 0 – 0 kPa 103 – 160psi 0 – 0 100psi – 0 60psi – 0 30psi – 0 15psi – 0 0 – 300psi 0 – 2069 kPa 2069 – 0 kPa 1379 – 0 kPa 1103 – 0 kPa 689 – 0 kPa 413 – 300psi 0 – 0 kPa 207 – 200psi 0 – 0 kPa 103 – 160psi 0 – 0 100psi – 0 60psi – 0 30psi – 0 15psi – 0 0 – 15psi 0 – 103 kPa 103 – 0 15psi – 0 kPa 103 – 0 15psi – 0 kPa 103 – 0 15psi – 0 0 – 30psi 0 – 207 kPa 207 – 0 30psi – 0 kPa 207 – 0 30psi – 0 kPa 207 – 0 30psi – 0 0 – 60psi 0 – 413 kPa 413 – 0 60psi – 0 kPa 413 – 0 60psi – 0 kPa 413 – 0 60psi – 0 0 – 100psi 0 – 689 kPa 689 – 0 100psi – 0 kPa 689 – 0 100psi – 0 kPa 689 – 0 100psi – 0 0 – 160psi 0 – 1103 kPa 1103 – 0 160psi – 0 kPa 1103 – 0 160psi – 0 kPa 1103 – 0 160psi – 0 0 – 200psi 0 – 1379 kPa 1379 – 0 200psi – 0 kPa 1379 – 0 200psi – 0 kPa 1379 – 0 200psi – 0 0 – 300psi 0 – 2069 kPa 2069 – 0 300psi – 0 kPa 2069 – 0 300psi – 0 kPa 2069 – 0 300psi – 0 0 – 600psi 0 – 4137 kPa 4137 – 0 600psi – 0 0 – 1000psi 0 – 6895 kPa 6895 – 0 1000psi – 0 SCALE SCALE 129 15 Gauges 23 23 23 23 23 23 23 DPG5 DPTG3 8 8 8 8 8 8 8 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ –– –– –– 7 7 7 7 7 7 7 49 49 49 49 49 4949 2 2 51 51 49 49 100100 1 1 25 25 16 16 16 16 16 16 16 16 16 16 16 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 15 15 15 15 15 15 15 15 15 15 15 DIMENSIONS For additional information, For additional ES- literature request or DPTG-1 ES-DPTG-3. A 2525 1 25 1 1 2525 1 25 1 1 2551 1 51 3 3 25 1 25 1 101101101 1 1 25 1 25 25 AB C in. mm in. mm in. mm B For additional information, information, For additional ES-DPG-5. literature request Y1 Y1 Y1 Y1 Y1 Y1 N1 N2 N2 N4 N4 N4 N1 N1 RETAINING VALVE RETAINING C A °C B 0 – 2069 kPa 0 – 2069 kPa 0 – 1379 kPa 0 – 1379 kPa 0 – 1103 kPa 0 – 1103 kPa 0 – 689 kPa 0 – 689 kPa 0 – 413 kPa 0 – 413 kPa 0 – 207 kPa 0 – 207 kPa 0 – 103 kPa 0 – 103 kPa 0 – 207 kPa 0 – 413 kPa 0 – 689 kPa 0 – 1103 kPa 0 – 1379 kPa 0 – 2069 kPa 0 – 103 kPa 0 – 11 bar " – 3") 2 ⁄ RANGE 1 SCALE TEMPERATURE TEMPERATURE INCLUDES VR (2 °F 0 – 300psi 0 – 300psi 0 – 200psi 0 – 200psi 0 – 160psi 0 – 160psi 0 – 100psi 0 – 100psi 0 – 60psi 0 – 60psi 0 – 30psi 0 – 30psi 0 – 15psi 0 – 30psi 0 – 60psi 0 – 100psi 0 – 160psi 0 – 200psi 0 – 300psi 0 – 15psi 0 – 15psi 0 – 160psi SCALE 0 – 75psi0 – 75psi 0 – 517 kPa0 – 75psi 0 – 517 kPa 60 – 320 0 – 517 kPa 60 – 320 16 – 160 60 – 320 16 – 160 16 – 160 0 – 75psi 0 – 517 kPa 60 – 3200 – 75psi 16 – 160 0 – 517 kPa 60 – 320 16 – 160 " or 3" dial size (2" – 3") 2 ⁄ ", 3" 1 2 ⁄ " " " " " " " 2 2 2 2 2 2 2 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 1 1 1 1 2" 3" 2" 3" 2" 3" 2" 3" 2" 3" 2" 3" 2" 3" DIAL SIZE "8 "8 "8 "" 15" 15 0 – 50psi" 15 0 – 75psi" 15 0 – 345kPa 0 – 200psi" 15 0 – 517kPa 0 – 50psi 32 – 0 248– 689 kPa"8 15 0 – 75psi 32 – 248" 32 – 248 0 – 340 kPa 0 – 200psi 0 – 120 " 15 0 – 517 kPa 60 – 0 320 0 – – 1379 120 kPa" 0 – 15120 60 – 320 0 – 50psi 60 – 320 "8 15 16 – 160 0 – 75psi 16 – 160 0 – 340 16 kPa– 160 0 – 200psi 0 – 517 kPa 60 – 320 0 – 1379 kPa 60 – 320 60 – 320 16 – 160 16 – 160 16 – 160 2 2 4 4 4 4 2 2 2 2 2 4 2 2 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ in. mm 1 1 1 1 1 1 1 1 1 1 1 1 1 1 For assistance, contact your local authorized agent Watts or visit our website at www.watts.com " " " " " " 2 2 2 2 2 2 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 1 1 1 DIAL 2 2 2 2 2 2 center back entry with extended temperature element center back entry with extended mounting nut 2 bottom entry 3" dial size center back entry, 2 center back entry, " connection) 2" 2 ⁄ ⁄ 8 1 2 2 2 2 ⁄ 1 "2 "2 "2 "2 "2 "2 "2 ⁄ ⁄ ⁄ ⁄ 1 2 2 2 2 2 2 2 " (3, 8mm) NPT connection 1 1 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 1 1 1 1 1 1 4

⁄ 1

", " (15mm) NPT connection MODEL 8 2 ⁄ ⁄

1 DPTG3A DPTG3L 1 DPTG1 DPTG3 MODEL SIZE SIZE DPG5-2 DPG5-3 DPG5-2 DPG5-3 DPG5-2 DPG5-3 DPG5-2 DPG5-3 DPG5-2 DPG5-3 DPG5-2 DPG5-2 DPG5-2 DPG5-2 DPG5-2 DPG5-2 DPG5-2 DPG5-3 DPG5-2 DPG5-3 DPG5-2 DPG5-2 ( DPTG1-3DPTG1-3 3" 3" DPTG3-2 DPTG3-2 DPTG3-2 DPTG3-3DPTG3-3 3" 3" DPTG3A-2 DPTG3L-2 DPTG3-3 3" DPTG3-2 DPTG1-3 3" DPTG3L-3 3" DPTG3A-3 3"

• Available in dial sizes 2", 2 Series Series DPG5 • • Working temperature -4°F to 176°F (-20°C to 80°C) Top Entry Gauges Pressure Top • Working temperature 40°F to 250°F (4.4°C to 121°C) Combined Temperature and Gauges Pressure Combined Temperature Models • • •

• Series DPTG1 and DPTG3 •

Gauges 15 130 requestliterature ES-IWTG-NYC-HTX. additionalFor information, requestliterature ES-IWTG-NYC-HTX. additionalFor information, requestliterature ES-IWTG-Gas. additionalFor information, • Includes set hand set Includes • valve shutoff Includes • Includes • Accuracy, 1% range full • IWTG-HTX Series Air TestAir Gauges Assembly Air TestAir Gauges Assembly Includes • size dial 2" in Available • IWTG-Gas Series • Includes shutoff valve shutoff Includes • Includes • Accuracy, 2% range full • IWTG-NYC Series Air TestAir Gauges Assembly IWTG-HTX IWTG-HTX IWTG-Gas2 IWTG-Gas2 IWTG-Gas2 IWTG-Gas2 IWTG-NYC IWTG-NYC MODEL MODEL MODEL 3 3 3 ⁄ ⁄ ⁄ 4 4 4 " (20mm) FPT x Schrader type air valve w/cap connection w/cap valve air type Schrader x FPT (20mm) " " (20mm) FPT x Schrader type air valve w/cap connection w/cap valve air type Schrader x FPT (20mm) " " (20mm) FPT x Schrader type air valve w/cap connection w/cap valve air type Schrader x FPT (20mm) " For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For DIAL SIZE DIAL DIAL SIZE DIAL DIAL SIZE DIAL 2 2 4" 4" 2" 2" 2" 2" 1 1 ⁄ ⁄ 2 2 " " (2") (4") (2 1 ⁄ 2 ") 0–5psi 0–10psi 0 – 100psi 0 – 689– kPa 0 413– kPa 0 207– kPa 0 103– kPa 0 0–100psi 0–60psi 0–30psi 0–15psi 0–10psi 0–5psi SCALE SCALE SCALE 0 – 34kPa– 0 0 – 69kPa– 0 0 – 69kPa– 0 34kPa– 0 IWTG-NYC IWTG-HTX IWTG-Gas 131 15 Gauges TB TBR For additional information, information, For additional ES-TB. literature request mm mm PROBE SIZE PROBE SIZE in. in. °C °C 0 – 800 – 600 – 1200 – 120 1 2 3 4 25 51 76 102 0 – 600 – 1200 – 60 20 – 120 20 – 60 40 – 120 51 4 51 0 – 60 20 – 120 102 2 102 4 51 4 51 102 102 0 – 1200 – 60 20 – 600 – 120 3 51 4 4 76 102 102 -30 – 50-30 – 50 2-30 – 50 4 51 -30 – 50 2 102 4 51 102 -30 – 50-30 – 50 2-30 – 50 3 51 4 76 102 SCALE SCALE °F °F 32 – 176 32 – 140 32 – 248 32 – 248 32 – 248 32 – 248 32 – 248 32 – 248 32 – 140 32 – 140 32 – 140 32 – 140 -22 – 122 -22 – 122 -22 – 122 -22 – 122 32 – 248 32 – 140 32 – 140 32 – 248 -22 – 122 -22 – 122 -22 – 122 ", 3", 4" 2 ⁄ 1 " – 4") 2 (3") ⁄ ", 2 1 2 ⁄ 1 (1 " " " " 2 2 2 2 ⁄ ⁄ ⁄ ⁄ For assistance, contact your local authorized agent Watts or visit our website at www.watts.com 1 1 1 1 3" 3" 4" 4" 3" 3" 3" 4" 4" 4" 4" 3" 1 2 2 2 DIAL SIZE DIAL SIZE " (15mm) NPT brass thermowell with set screw " (15mm) NPT brass snap-in thermowell 2 2 ⁄ ⁄ 1 1

-4 -1 -2 -3 2 2 2 2 ⁄ ⁄ ⁄ ⁄ 1 1 1 1

TBR-3-3TBR-3-4 3" 3" TBR-3-2 3" TBR-3-2TBR-3-3 3" TBR-3-4 3" 3" TBR-3-4 3" MODEL MODEL TB-3-2 TB-3-4 TB-4-2 TB-4-4 TB-4-4 TB-3-2 TB-3-4 TB-4-2 TB-4-2 TB-4-4 TB-3-4 TB-3-2 For additional information, information, For additional ES-TBR. literature request TB-2 TB-2 TB-2 Center Back Entry Bimetal Thermometers TB-1 • Includes • Available in dial sizes: 1 Series Series TB Series TBR • Available in 3" dial size • Includes Bottom Entry Bimetal Thermometers

Gauges 15 132 requestliterature ES-TBC. additionalFor information, requestliterature ES-TBP. additionalFor information, requestliterature ES-TA. additionalFor information, TBC-2 • Chimney mount-center back entry back mount-center Chimney • • Available in 2 in Available • TBC Series Center Back Entry Bimetal Thermometers Bimetal Entry Back Center Adjustable Angle Thermometers Angle Adjustable • Available in 9" scale size scale 9" in Available • TASeries • Pipe mount – choice of spring mount (M) or strap mount (F) mount strap or (M) mount spring of choice – mount Pipe • • Available in 2 in Available • TBP Series Pipe Mount Bimetal Thermometers Bimetal Mount Pipe TBP-M-2 TBC-2 TBC-2 TBC-2 TBP-F-2 MODEL MODEL TA-9-3 TA-9-3 TA-9-3 TA-9-3 TA-9-6 TA-9-6 TA-9-6 TA-9-6 TA-9-6 TA-9-3 MODEL 1 1 1 1 ⁄ 2 ⁄ ⁄ ⁄ 2 2 2 1 2 -12 -8 -6 -4 1 1 ⁄ 1 1 1 1 1 ⁄ 2 2 ⁄ ⁄ ⁄ ⁄ ⁄ 2 2 2 2 2 1 1 ⁄ ⁄ 2 2 " dial size dial " " dial size dial " DIAL SIZE DIAL For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For 2 2 2 -40 – 110 -40 – 43 – -40 110 – -40 -40 – 110 -40 – 43 – -40 110 – -40 1 1 1 1 30 – 300 28 – 148 – 28 115 – 28 300 – 30 240 – 30 30 – 300 28 – 148 – 28 115 – 28 300 – 30 240 – 30 ⁄ ⁄ ⁄ ⁄ 2 2 2 2 0 – 160 -17 – 71 – -17 48 – -17 160 – 0 120 – 0 0 – 160 -17 – 71 – -17 48 – -17 160 – 0 120 – 0 " " " " (9") °F TEMPERATURERANGE DIAL SIZE DIAL 2 2 (2 (2 1 1 ⁄ ⁄ 2 2 " " 1 1 ⁄ ⁄ 2 2 ") ") 32 – 932 – 32 932 – 32 932 – 32 932 – 32 °F °C SCALE 32 – 248 – 32 248 – 32 0 2305 203 152 102 12 8 6 4 500 – 0 500 – 0 500 – 0 500 – 0 °F °C 3 3 3 3 3 in. 6 6 6 6 6 1 1 1 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ 2 2 2 2 2 SCALE STEM SIZE STEM n mm in. PROBE SIZE PROBE 0 – 120 – 0 120 – 0 152 152 152 152 152 mm 89 89 89 89 89 °C TBP TBC TA 133 15 Gauges TL G-TB and air conditioning systems temperature temperature and checks pressure Features • Economical means of balancing heating • Eliminates shutting down system for 33 33 33 33 mm STEM SIZE 16 16 16 16 ⁄ ⁄ ⁄ ⁄ 5 5 5 5 in. 1 1 1 1 ") 2 ⁄ Neoprene Neoprene (Blue) – Natural gas and EPDM (White) – Hot and cold water Viton (Green) – Hot oil service, 1 ( °C petroleum products. Temperature range: - petroleum products. Temperature 40°F to 200°F (-40°C to 93°C). TP-E: range: -40°F to service. Temperature 275°F (-40°C to 135°C). TP-V: range: - chemical service. Temperature 10°F to 400°F (-23°C to 204°C). For additional information, request literature ES-TP. Models TP-N: ") 2 ⁄ 1 TEMPERATURE RANGE TEMPERATURE ", 4 ⁄ °F 1 ( " (8 or 15mm) (5") 2 ⁄ 20 – 18030 – 24030 – 300 -6 – 82 28 – 115 28 –148 1 -40 – 110 -40 – 43 " (8 and 15mm) For assistance, contact your local authorized agent Watts or visit our website at www.watts.com 2 ⁄ " or 1 4 ⁄ 1 " and 4 ⁄ 1 for thermometer model TBR with set screw for thermometer models TB and TBC

G-TB G-TBR MODEL TL-5-2 TL-5-2 TL-5-2 TL-5-2 NPT test plugs. Plug extensions are also available in Used on various applications of gas, air, water or chemicals up to 500psi (34.5 bar). The gauge pressure adapter has a 0.076" (2mm) diameter probe of 300 series stainless steel with brass union nut. The probe operates in either Specifications • and probe pressure inserts into the Temperature test plug for test readings • No need to leave costly gauges in the supply line Series TP NPT sizes to accommodate insulated pipe situations. Test Plugs for Pressure and Temperature Test Readings Test Plugs for and Pressure Temperature Test Brass Thermowells

• • Series G-TB, G-TBR For additional information, request request information, For additional or ES-G-TB ES-B-TBR. literature Angle Thermometers

For additional information, information, For additional ES-TL. literature request Series Series TL • Available in 5" scale size

Gauges 15 134 andexternal plumbing surfaces. OneFlow ES-OF744_844_948_1054_1252, ES-OF1465_1665, ES-OneFlow-HotWater.ES-OF1465_1665, ES-OF744_844_948_1054_1252, ES-OF210_220_240, ES-OF110_120_140, request information, further For gpm 75 available. Media Replacement and Cartridges Replacement gpm 20 gpm OF1465-75H 12 gpm 8 OF1019-20H OF817-12H OF-817-8H gpm 75 gpm Water 50 Hot gpm 30 OF-1665-75 gpm 20 OF1465-50 gpm 16 OF1252-30 gpm 12 OF1054-20 gpm 10 OF948-16 gpm 4 OF844-12 gpm 2 OF744-10 gpm 1 TankStyle gpm 4 OF240-4 gpm 2 OF220-2 gpm 1 OF210-1 OF140-4 OF120-2 OF110-1 Style Cartridge Models applications water hot and tank, Cartridge, • installation and sizing Simple • appliances using water of efficiency Improves • wastewater no and electricity valve, control No • free maintenance Virtually • protection and prevention scale free Chemical • Features OneFlow The Sizes: Connection OneFlow ofscale inpipes, water heaters, boilers andonfixtures are nolonger concern.a backwashing,nosalt andnoelectricity. Typical hardness problems, especially build-up ® Anti-Scale System provides protection from scale formation on internal on formation scale fromprotection provides System Anti-Scale For assistance, contact your local authorized Watts agent or visit our website at www.watts.comat website our visit or Wattsagent authorized local your contact assistance, For ® Anti-Scale System Anti-Scale 3 ⁄ 4 ", 1", 1 1", ", 1 ⁄ ® 4 ", and 2" and ", systemsrequire very little maintenance, no OF1252-30 OF120-2 OF240-4 135 16 Anti-Scale Systems Notes

136 Notes

137 Trademarks

Celcon® is a registered trademark of Celanese, Limited. Noryl® is a registered trademark of SABIC Innovative Plastics™. Teflon® is a registered trademark of the E.I. Dupont de Nemours & Company. Viton® is a registered trademark of DuPont Dow Elastomers.

138

For Technical Assistance Call Your Authorized Watts Agent. Telephone # Fax #

HEADQUARTERS: Watts Regulator Company 815 Chestnut St., North Andover, MA 01845-6098 U.S.A. 978 688-1811 978 794-1848

Edwards, Platt & Deely, Inc. 271 Royal Ave., Hawthorne, NJ 07506 973 427-2898 973 427-4246 Edwards, Platt & Deely, Inc. 368 Wyandanch Ave., North Babylon, NY 11703 631 253-0600 631 253-0303 Vernon Bitzer Associates, Inc. 980 Thomas Drive, Warminster, PA 18974 215 443-7500 215 443-7573 East North W. P. Haney Co., Inc. 51 Norfolk Ave., South Easton, MA 02375 508 238-2030 508 238-8353

Disney McLane & Associates 428 McGregor Ave., Cincinnati, OH 45206 800 542-1682 877 476-1682 J. B. O’Connor Company, Inc. P.O. Box 12927, Pittsburgh, PA 15241 724 745-5300 724 745-7420 RMI Glenfield Bus. Ctr., 2535 Mechanicsville Tpk., Richmond, VA 23223 804 643-7355 804 643-7380 Mid The Joyce Agency, Inc. 8442 Alban Rd., Springfield, VA 22150 703 866-3111 703 866-2332

Atlantic WMS Sales, Inc. (Main office) 9580 County Rd., Clarence Center, NY 14032 716 741-9575 716 741-4810

Billingsley & Associates, Inc. 2728 Crestview Ave., Kenner, LA 70062-4829 504 602-8100 504 602-8106 Billingsley & Associates, Inc. 478 Cheyenne Lane, Madison, MS 39110 601 856-7565 601 856-8390 Francisco J. Ortiz & Co., Inc. Charlyn Industrial Pk., Road 190 KM1.9 - Lot #8, Carolina, Puerto Rico 00983 787 769-0085 787 750-5120 Mid-America Marketing, Inc. 203 Industrial Drive, Birmingham, AL 35211 205 879-3469 205 870-5027 Mid-America Marketing, Inc. 1364 Foster Avenue, Nashville, TN 37210 615 259-9944 615 259-5111

East Mid-America Marketing, Inc. 5466 Old Hwy. 78, Memphis, TN 38118 901 795-0045 901 795-0394 South Smith & Stevenson Co., Inc. 4935 Chastain Ave., Charlotte, NC 28217 704 525-3388 704 525-6749 Harry Warren, Inc. 1400 North Orange Blossom Trail, Orlando, FL 32804 407 841-9237 407 841-9246 Watts Georgia 2861-B Bankers Industrial Drive, Atlanta, GA 30360 770 209-3310 770 447-4583

Dave Watson Associates 1325 West Beecher, Adrian, MI 49221 517 263-8988 517 263-2328 Mid-Continent Marketing Services Ltd. 1275 Lakeside Drive, Romeoville, IL 60446 630 953-1211 630 953-1067 Soderholm & Associates, Inc. 7150 143rd Ave. N.W., Anoka, MN 55303 763 427-9635 763 427-5665

North Stickler & Associates 333 North 121 St., Milwaukee, WI 53226 414 771-0400 414 771-3607 Central

Hugh M. Cunningham, Inc. 13755 Benchmark, Dallas, TX 75234 972 888-3808 972 888-3838 HMC Sandia Group 13755 Benchmark, Dallas, TX 75234 505 222-3134 800 339-0191 Mack McClain & Associates 4407 Meramec Bottom, Suite G, St. Louis, MO 63129 314 894-8188 314 894-8388 Mack McClain & Associates, Inc. 1450 NE 69th Place, Ste. 56 Ankeny, IA 50021 515 288-0184 515 288-5049 South

Central Mack McClain & Associates, Inc. 15090 West 116th St., Olathe, KS 66062 913 339-6677 913 339-9518 OK! Sales, Inc. 214 NE 12th. St., Ste A Moore, OK 73160 405 794-5200 405 794-5250

Delco Sales, Inc. 1930 Raymer Ave., Fullerton, CA 92833 714 888-2444 714 888-2448 Delco Sales, Inc. 111 Sand Island Access Rd., Unit I-10, Honolulu, HI 96819 808 842-7900 808 842-9625 Fanning & Associates, Inc. 6765 Franklin St., Denver, CO 80229-7111 303 289-4191 303 286-9069 Hollabaugh Brothers & Associates 6915 South 194th St., Kent, WA 98032 253 867-5040 253 867-5055 Hollabaugh Brothers & Associates 3028 S.E. 17th Ave., Portland, OR 97202 503 238-0313 503 235-2824 P I R Sales, Inc. 3050 North San Marcos Place, Chandler, AZ 85225 480 892-6000 480 892-6096 Western Preferred Sales 30852 Huntwood Ave., Hayward, CA 94544 510 487-9755 510 476-1595 R. E. Fitzpatrick Sales, Inc. 4109 West Nike Dr. (8250 South), West Jordan, UT 84088 801 282-0700 801 282-0600

Watts Industries (Canada) Inc. (Watts Regulator Co. Division) 5435 North Service Road, Burlington, Ontario L7L 5H7 905 332-4090 905 332-7068 Con-Cur West Marketing, Inc. 71B Clipper Street, Coquitlam, British Columbia V3K 6X2 604 540-5088 604 540-5084 D.C. Sales Ltd. #13-6130 4th St. S.E., Calgary, Alberta T2H 2B6 403 253-6808 403 259-8331 D.C. Sales Ltd. 16726 111 Ave, Edmonton, Alberta T5M 2S6 780 496-9495 780 496-9621 GTA Sales Team. Greater Toronto Area 888 208-8927 888 479-2887 Hydro-Mechanical Sales, Ltd. 3700 Joseph Howe Drive, Suite 1, Halifax, Nova Scotia B3L 4H7 902 443-2274 902 443-2275 Hydro-Mechanical Sales, Ltd. P.O. Box 1445 (Mailing), 297 Collishaw St., Suite 7 (shipping) Moncton, New Brunswick E1C 9R2 506 859-1107 506 859-2424 J.D.S. Sales Ltd. 4 Lancaster Street, St. John’s, Newfoundland A1A 5P7 709 579-5771 709 579-1558 Les Ent. Roland Lajoie 6221 Marivaux, St-Leonard, QC H1P 3H6 514 328-6645 514 328-6131

Canada Les Ent. Roland Lajoie 23 du Buisson, Pont Rouge, QC G3H 1X9 418 873-2500 418 873-2505 Mar-Win Agencies, Ltd. 1333 Clifton St., Winnipeg, Manitoba R3E 2V1 204 775-8194 204 786-8016 Northern Mechanical Sales P.O. Box 280 (mailing) 163 Pine St. (shipping), Garson, Ontario P3L 1S6 705 693-2715 705 693-4394 Palser Enterprises, Ltd. P.O. Box 28136 (mailing), 1885 Blue Heron Dr., #4, London, Ontario N6H 5L9 519 471-9382 519 471-1049 RAM Mechanical Marketing Inc. 905 Winnipeg Street, Regina, Saskatchewan S4R 1J1 306 525-1986 306 525-0809 RAM Mechanical Marketing Inc. 510 Ave M South, Saskatoon, Saskatchewan S7M 2K9 306 244-6622 306 244-0807 Walmar Mechanical Sales 24 Gurdwara Rd., Nepean, Ontario K2E 8B5 613 225-9774 613 225-0673

EXPORT Hdqtrs.: Watts Regulator Co. 815 Chestnut St., North Andover, MA 01845-6098 U.S.A. 978 688-1811 978 794-1848 0921