Compatibility Wireless Charger Operation Important Safety Instructions

Compatible with Qi-enabled devices* including  Untwist the black cover of the Watch charger housing • Only use original or reputable third party chargers and cables  Using your exisiting Apple Watch magnetic charging cable (not • Do not get wet to avoid causing short circuit damage and leakage  iPhone 11 Pro/11  Samsung S10/S9/S8  /3 XL included), insert into the holder and wrap the cable around the • Do not use in extreme hot, humid or corrosive environments to Model: WCTA10  iPhone XS/XS Max/XR  Samsung Note 10/9/8/5  Xperia XZ2 cylinder and plug into the USB-A port on the back of the dock avoid short circuit damage and leakage  iPhone X/8/8 Plus  P30 Pro  LG G7 ThinQ Apple 3-iin-1 Wireless Charging Dock  Twist the black cover back over the watch magnetic charger • Do not place too close to magnetic strip or chip ID card to avoid  Samsung Galaxy Fold  /20 Pro  LG V30+ User Manual v1.1  The red LED will be on for 3 seconds to indicate the charging pad is magnetic failure powered on and in stand-by mode • Do not place within 20cm of implantable medical devices Features  Place your wireless phone on either charging pad and your phone (pacemaker, cochlear implant etc.) to avoid potential interference should start charging automatically • Do not clean with harmful chemicals or detergents • Misuse, dropping or excessive force may cause damage to the  Can charge a wireless iPhone and wireless Airpods or two wireless  If your phone does not not start charging, move your phone until the charging dock phones correct position is found and your phone starts charging  Place your wireless charging Airpods on either charging pad  Requires Apple Watch magnetic charging cable to insert into dock  Place your Apple watch on the Apple magnetic watch charger (not included)  The LED will flash green to indicate charging  Supports 7.5W Apple wireless fast charging for iPhone 8 or later  When your phone is fully charged, the Smart IC enables energy saving trickle charge mode  Supports 10W wireless fast charging for compatible devices such as Samsung Galaxy Series and more Please Note: When wirelessly charging a device, the wireless

charger and your device may feel warm. This is a normal operating  Supports 5W standard wireless charging for all Qi enabled devices condition and should not be cause for concern.  No need to remove your protective case. Works with most cases up to 3mm thick Specifications

 LED indicator to show charging status  Wireless Standard: WPC/Qi (v1.2.4)  Smart IC enables energy saving mode when device is fully charged  Quantity of Wireless Charging Coils: One Coil per Pad  Input: QC 3.0 DC 9V 2A  Full safety protection for your devices with Qi certified temperature iPhone is a trademark of Apple inc., registered in the U.S. and other countries.  Output: 10W / 7.5W / 5W / 3W for charging pads control, strict voltage regulation & short circuit protection The ‘Qi’ Symbol is a trademark of the Wireless Power Consortium. Qi Certified  Output: DC 5V 2A for Apple Watch Android is a trademark of Google Inc.  Includes AC wall charger and 1.5m USB-A to USB-C cable Certification program ensures this  Working Frequency: 110 to 205KHz charger has passed rigorous tests  Charging Distance: 3 to 8mm to guarantee safety, compatibility  Charging Efficiency: >72% * Check with device manufacturer for Qi wireless compatibility and energy efficiency.  Dimensions: 228 x 75 x 76mm www.mycomsol.com.au Made in China