GEOMET® 720 Is Applied to Protect Fasteners and Many Type of Metallic Parts from Corrosion and Is Used in Many Industries

Total Page：16

File Type：pdf, Size：1020Kb

GEOMET® 720 Is Applied to Protect Fasteners and Many Type of Metallic Parts from Corrosion and Is Used in Many Industries

v> 24 g/m2 720 Performance thickness ratio at its best GEOMET® 720 is applied to protect fasteners and many type of metallic parts from corrosion and is used in many industries. It can be combined with PLUS topcoats to provide a very broad range of friction coefficients. It is the reference zinc flake coating in Asia. Thin dry-film, non-electrolytic Water-based chemistry Passivated zinc and aluminium flakes in a binder, patented chemistry Chrome free alternative to DACROMET® Metallic silver appearance Characterictics and performance* The coefficient of friction can be adjusted to targeted values ranging from 0.06 to 0.20 (ISO 16047) with NOF METAL COATING GROUP’s selected topcoats It can be used with or without topcoat No hydrogen embrittlement Excellent assembly and multi-tightening behavior (with lubricated topcoat) Performance maintained at elevated temperatures (up to 300°C) Paintable coating Electrical conductivity for most application processes Bimetallic compatibility with aluminum High corrosion resistance* Coating Weight Salt Spray Test (ISO 9227/ASTM B117) > 24 g/m2 > 1000 hours without red rust * Results may vary depending on substrate, geometry of parts and type of application processes 720 Application process GEOMET® 720 can be applied by Dip-Spin, Spray, Dip-Drain-Spin using bulk or rack Health and Safety Aqueous dispersion 0416/02 / EN Complies with REACh / 720 Complies with the 2000/53/CE and 2002/95/CE directives Among our worldwide specifications InfoPrd/GEOMET DAIHATSU HONDA HYUNDAI ISUZU KIA MAZUDA MITSUBISHI MOTORS NISSAN SAMSUNG HEAVY INDUSTRIES SUBARU SUZUKI TOYOTA YAMAHA International standards EN ISO 10683 - Fasteners: non-electrolytic zinc flake coatings EN 13858 - Non-electrolytic zinc flake coatings on iron and steel parts www.nofmetalcoatings.com .

Copy Link

Recommended publications

Zinc Flake Systems from Dörken MKS Superbly Thin High-Performance Protection
Zinc Flake Systems from Dörken MKS Superbly thin high-performance protection ZINC FLAKE 390.156_Zinklamelle_A4_12-Seiten_E_RZ.indd 1 27.11.18 09:02 EXTREMELY LOW COATING THICKNESS AND HIGH DURABILITY With high-performance zinc flake systems, Dörken MKS offers surface protection with excellent long-term effectiveness, tried and tested over many years in a wide range of sectors and applications. The special advantage: this is achieved with an ex- tremely thin coating – a system consisting of base- and topcoat with a thickness of just 8-20um protects steel parts for over 1,000 hours against base metal corrosion (red rust) in the salt spray test according to DIN EN ISO 9227. COMPLEX GEOMETRIES AND HIGH TENSILE STEELS With their high-performance capacity combined with minimal coat thickness, zinc flake coatings are used most widely for screws and fastener technology in the automotive sector – but Dörken MKS systems also have an impressive record in the coating of large construction parts of complex geometry. Furthermore, the superbly thin protective film is attractive from an ecological and economical point of view owing to its low resource input. A further advantage: As no hydrogen is produced during the coating process, there is no risk of ap- plication-related, hydrogen embrittlement. Zinc flake coatings are therefore particularly well suited for high tensile steels (> 1000 MPa). 390.156_Zinklamelle_A4_12-Seiten_E_RZ.indd 2 27.11.18 09:02 Scanning electron microscope image of a zinc flake coating WHAT IS A ZINC FLAKE COATING? The coating is a metallic „lacquer“ consisting of numerous small flakes (as per DIN EN ISO 10683 or DIN EN 13858), bound together through an inorganic matrix and providing active cathodic corrosion protection.
[Show full text]
Zinc Flake Coating 1 Geomet®
ZINC FLAKE COATING GEOMET ® 321321321 GEOMET ® 321 is applied to protect fasteners and many type of metallic parts from corrosion and is used in many industries. It can be combined with PLUS ®, DACROLUB ® or GEOKOTE ® topcoats to provide a very broad range of friction coefficients. It is the most widely used product in zinc flake technology. Characterictics and performanceperformance**** The coefficient of friction can be adjusted to targeted values ranging from 0.06 to 0.20 (ISO 16047) with NOF METAL COATING GROUP’s selected topcoats It can be used with or without topcoat No hydrogen embrittlement Excellent assembly and multi-tightening behavior (with lubricated topcoat) Good mechanical damage (test method D24 1312, USCAR 32) and chemical (test VDA 621-412) resistance Performance maintained at elevated temperatures (up to 300°C) Paintable coating Electrical conductivity for most application processes Bimetallic compatibility with aluminum Thin dry-film, non-electrolytic Water-based chemistry Passivated zinc and aluminium flakes in a binder, patented chemistry Chrome free alternative to DACROMET ® 320 Metallic silver appearance High corrosion resistance* Salt Spray Test (IS0 9227/ASTM Coating Weight Cyclic Test B117) GRADE A > 240 hours without white rust - > 24 g/m2 > 720 hours without red rust GRADE A 4 cycles ACT > 24 g/m2+ > 720 hours without red rust 60 cycles GMW 14872 topcoat 60 cycles SAE J2334 GRADE B m2 > 1000 hours without red rust - > 36 g/m2 ***Results* may vary depending on substrate, geometry of parts and type ok application
[Show full text]
International Standard Iso 10683:2014(E)
This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-917454 INTERNATIONAL ISO STANDARD 10683 Second edition 2014-05-15 Fasteners — Non-electrolytically applied zinc flake coatings Fixations — Revêtements non électrolytiques de zinc lamellaire Reference number ISO 10683:2014(E) © ISO 2014 This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-917454 ISO 10683:2014(E) COPYRIGHT PROTECTED DOCUMENT © ISO 2014 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of the requester. ISOTel. copyright+ 41 22 749 office 01 11 Case postale 56 • CH-1211 Geneva 20 FaxWeb + www.iso.org 41 22 749 09 47 E-mail [email protected] Published in Switzerland ii © ISO 2014 – All rights reserved This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-917454 ISO 10683:2014(E) Contents Page Foreword ........................................................................................................................................................................................................................................iv Introduction ................................................................................................................................................................................................................................vi
[Show full text]
Zinc Flake Coating Systems
ZINC FLAKE COATING SYSTEMS REMBRANDTIN IS ONE OF THE WORLD‘S LEADING PRODUCERS OF SPECIALT Y COATINGS REMBRANDTIN REMBRANDTIN STANDS FOR TRADITION, QUALITY AND INNOVATION HIGHTECH COATINGS FOR YOUR PROFESSIONAL PARTNER DIFFERENT REQUIREMENTS WORLDWIDE The history of Rembrandtin Lack GmbH Nfg. KG dates back Rembrandtin exports more than 70 % of its products globally. to the year 1937. Today, the company is a specialist for Our sales representations worldwide enable us to support high-tech coatings like high-temperature resistant systems, our customers personally and on site, whether in China, core plate varnishes or railway coatings. Decades of Brazil, India or Russia. experience make us a reliable partner with global approvals from market leaders in the general industry and the automotive sector. Since 2014, the company is part of the SUSTAINABLE RESEARCH Helios Group, which belongs to the top ten companies of the AND DEVELOPMENT European coatings industry. Around 35 % of employees work in research and development. The experienced professionals develop the special properties of our product solutions to meet the requirements of our customers and the steadily rising demands of the industry. In this context preserving sustainability is of major importance – in 2012 Rembrandtin was the first Austrian company to receive the European Responsible Care award. REMCOR – THE FUTURE IN ZINC REMCOR IS A COATING SYSTEM SPECIFICALLY DESIGNED FOR HIGHLY EFFICIENT CORROSION PROTECTION WITH CUSTOMIZABLE PROPERTIES ZINC FLAKE SYSTEMS COATING SYSTEM STRUCTURE The zinc flake coating system is a method to apply cathodic The REMCOR ZINC FLAKE COATING SYSTEM consists of a corrosion protection in a currentless way. Additional topcoats basecoat (REMCOR BASE) and a topcoat (REMCOR TOP).
[Show full text]
Higher Performance Capacity Through the Use of Coatings Functional Coatings for Automotive and Industrial Applications
Higher Performance Capacity Through the Use of Coatings Functional coatings for automotive and industrial applications Introduction Functional coatings for Surface technology is one of the most important key technologies automotive and industrial in industrialized countries. The Schaeffler Surface Technology applications Department brings together three important competences: coating technology, basics of tribology and nanotechnology. Schaeffler is a world leader in functional surfaces and coatings. Accordingly, precision components and systems from Schaeffler offer high performance capacity with extended maintenance intervals as well as a long lifetime. Through the use of suitable coating systems, it is possible to fulfil higher requirements in terms of corrosion or wear protection as well as reductions in friction. As a result, coating systems from Schaeffler contribute to the conservation of resources, since the operating life of components is extended and energy losses are reduced as a result of lower friction. Coating systems and Selection of the appropriate coating system is based on the modular their areas of application coating tool box from Schaeffler, Figure 1. The modular coating tool box offers individual solutions for the customer. The coating systems are applied to the surface by completely different methods. They should always be individually matched to the mounting situation. In many cases, it is sufficient to coat only one component or one of the rolling contact partners. This Technical Information gives an overview of the coatings used at Schaeffler, arranged according to the main areas of use. The features, advantages and benefits are given for each type of coating. Specific examples and references are shown. This technology will become increasingly important in the future, not only for existing products but also in particular for new types of products.
[Show full text]
Zinc Flake Coating Alexander Sharp B.Eng (Mechanical) UTS Kaung Hlaing B.Eng (Mechanical) UTS
2001101HA HOBSONARTICLES Zinc Flake Coating Alexander Sharp B.Eng (Mechanical) UTS Kaung Hlaing B.Eng (Mechanical) UTS Zinc Flake Coating was developed in the United States (around 5 μm) or hot dipped galvanising (around 45 μm). The in the 1970’s as a response to problems associated with zinc flake coatings acts as both a sacrificial coating combined traditionally used coating systems such as electroplating with a protective barrier whereas the electroplated zinc and hot and galvanising. Electroplating only provides relatively low dipped galvanising act as sacrificial layers only. corrosion protection. Both electroplating and galvanising The zinc flake coating thickness can also be specified to allow generate hydrogen during the application process, creating for thread tolerance requirements providing more flexibility in the risk of hydrogen embrittlement particularly in high strength fastener engagement requirements. products. There is no acid washing in the cleaning process of zinc flake coating, reducing industrial waste and potential risk Cathodic Protection to the environment. Galvanic corrosion occurs when two dissimilar metals that are in electrical contact are immersed in an electrolyte. The more Zinc Flake Coating consists of a mixture of zinc and active (less noble or less passive) metal of the two becomes aluminium flakes which are bonded together by an inorganic an anode and corrodes at a faster rate than the less active matrix. These coatings are non-electrolytically applied, which (more noble or more passive) metal which is the cathode. The provide increased protection against corrosion. The coating cathode is thus protected by the sacrificial anode, in this case thickness is usually between 5 μm and 20 μm, but can be the zinc and aluminium layer.
[Show full text]
Zinc Flake Coating Systems
ZINC FLAKE COATING SYSTEMS REMBRANDTIN IS ONE OF THE WORLD‘S LEADING PRODUCERS OF SPECIALT Y COATINGS REMBRANDTIN REMBRANDTIN STANDS FOR TRADITION, QUALITY AND INNOVATION HIGHTECH COATINGS FOR YOUR PROFESSIONAL PARTNER DIFFERENT REQUIREMENTS WORLDWIDE The history of Rembrandtin Lack GmbH Nfg. KG dates back Rembrandtin exports more than 70 % of its products globally. to the year 1937. Today, the company is a specialist for Our sales representations worldwide enable us to support high-tech coatings like high-temperature resistant systems, our customers personally and on site, whether in China, core plate varnishes or railway coatings. Decades of Brazil, India or Russia. experience make us a reliable partner with global approvals from market leaders in the general industry and the automotive sector. Since 2014, the company is part of SUSTAINABLE RESEARCH the Helios Group, which belongs to the top ten companies AND DEVELOPMENT of the European coatings industry that has been part of the worldwide KANSAI PAINT Group since 2017. Around 35 % of employees work in research and development. The experienced professionals develop the special properties of our product solutions to meet the requirements of our customers and the steadily rising demands of the industry. In this context preserving sustainability is of major importance – in 2012 Rembrandtin was the first Austrian company to receive the European Responsible Care award. REMCOR – THE FUTURE IN ZINC REMCOR IS A COATING SYSTEM SPECIFICALLY DESIGNED FOR HIGHLY EFFICIENT CORROSION PROTECTION WITH CUSTOMIZABLE PROPERTIES ZINC FLAKE SYSTEMS COATING SYSTEM STRUCTURE The zinc flake coating system is a method to apply cathodic The REMCOR ZINC FLAKE COATING SYSTEM consists of a corrosion protection in a currentless way.
[Show full text]
Hexagon Socket Head Cap Screws 12.9 with Zinc Flake Coating
Product information ISO 4762/DIN 912 Hexagon socket head cap screws, property class 12.9, with zinc flake coating The zinc flake coating of these hexagon socket head Advantages cap screws, property class 12.9, has impressive proper- ties: temperature resistance of up to +150 °C and ▶ Items in stock available for immediate delivery chemical resistance, which also enables use in critical areas. Hydrogen cannot penetrate to the metal due ▶ Higher corrosion protection and reduced to this coating process, almost completely preventing maintenance costs hydrogen-induced stress cracking corrosion (hydrogen 480-hour salt spray test embrittlement). This corrosion protection coating also ▶ Temperature resistance of coating up to +150 °C enables outdoor use. The use of property class 12.9 Permits, e. g. use in encapsulated engine compartments screws means that, based on the same preloads, small- er bolt diameters can be used than those required for ▶ No risk of hydrogen-induced stress cracking corrosion property classes 8.8 or 10.9. This is a significant advan- (hydrogen embrittlement) tage for the construction as it allows for more compact design. The standardisation of the coatings also facili- ▶ More compact design possible tates the procurement process. Based on identical preloads, smaller screw diameters for property class 12.9 screws can be used than for grade REYHER offers zinc flake coatings in accordance with property classes 8.8 and 10.9 screws. ISO 10683 with a resistance of 480 hours based on ISO 9227 NSS and a total friction coefficient of μ = 0.09– ▶ Chemical resistance of coating permits use in 0.14.
[Show full text]
Fastener Guide 2017
FASTENERS AND FIXING TECHNOLOGY FASTENERS AND FIXING TECHNOLOGY +49 40 85363-0 F. REYHER Nchfg. GmbH & Co. KG [email protected] Haferweg 1 www.reyher.de 22769 Hamburg FASTENER GUIDE Germany 49408.001.2017.000 49408.001.2017.000 H1/EN2/0417/1/0417 22906-2_Reyher_Serviceheft_Umschlag_EN_2017.indd Alle Seiten 05.04.17 11:04 Contents Page REYHER - THE COMPANY 2-11 SELECTION AID FOR CORROSION PROTECTION - COATINGS FOR STEEL FASTENERS 12 INSTRUCTIONS: BRIEFY EXPLAINED... 13 FASTENERS 14-66 Standardized products, in ascending order according to standard numbers 14-54 Non standardized screws and bolts, nuts and inserts, accessories 55-66 – Non standardized machine screws 55-56 – Non standardized tapping screws 56 – Non standardized screws for thermoplastic 57 – Non standardized wood and chipboard screws, SPAX screws 57-60 – Fasteners with theft resistant drives 60 – Non standardized hooks and eyes 61 Non standardized nuts and inserts 61-64 Non standardized accessories 64-66 FIXING TECHNOLOGY 67-79 Cable ties 67 LINDAPTER clamps/accessories 68-69 MTH-clamping plates 69 FISCHER-Plugs and anchors 69-74 – General Fixings 69-70 – High performance steel anchors 70-71 – Chemical fixings 71-72 – Cavity fixings 72 – Long shaft anchors, frame fixings, adjustment fixings 72-73 – Scaffold fixings 73 – Insulation supports 73 – Electrical fixings 74 UPAT-Plugs and anchors 74-75 Anchors - heavy duty fixings / Chemical fixings Other fixing elements 75-77 Assembly tools - drills, bits, wrench keys 77 Blind rivet tools 77-79 TECHNICAL INFORMATION 80-93 FASTENERS AND FIXING TECHNOLOGY FROM A TO Z 94-100 1 © 2017 by REYHER, Hamburg Central location Hamburg – our gateway to the world since 1887 Today REYHER is one of Europe’s leading distributors of fasteners and fixing technology supplying industry and trade customers worldwide.
[Show full text]
Brief Information Innovative and Highly Functional Surface Designs
brief information innovative and highly functional surface designs 1 content Aalberts surface treatment processes Anodizing and hard anodizing Page* Polymer coatings Page* ■■CompCote® 3 ■■HMF® - ■■Color anodizing - ■■MagnaCoat® 29 ■■HART-COAT® 5 ■■TempCote® 31 ■■HART-COAT® GLATT 7 ■■Anodizing 9 Electroless nickel plating Powder coating ■■DURNI-COAT® and variants, 11 ■■FlexiColor® 33 including PTFE-DURNI-DISP and SIC-DURNI-DISP ■■NEDOX® - Chrome and cadmium substitute Screw locking ■■IVD aluminium vacuum coating 13 ■■screw locking and 35 ■■SurTec® 650 - thread sealing Cr Cd Galvanic coatings Selective coatings (High Tech Galvanics) 15 ■■LASOX-COAT® 37 ■■Chrome (Cr)/Hard chrome - ■■SELGA-COAT® 39 ■■Copper (Cu) - ■■SELGA-COAT® CHROME - ■■DURALLOY® 17 ■■SELGA-COAT® GOLD - ■■Gold (Au) - ■■Nickel (Ni) - ■■Nickel sulfamate - ■■Silver (Ag) - ■■Tin (Sn) - ■■Zinc (Zn) 19 ■■Zinc iron (Zn-Fe) - ■■Zinc nickel (Zn-Ni) 21 Anti-friction coatings Sherardizing ■■antifricor® - ■■FuseCoat® 41 ■■GLISS-COAT® 23 ■■GLISS-COAT® FLOCK 25 Zn Cathodic dip painting 25 Thermal spraying ■■PlasmaCoat® 43 ■■Thermical spraying 45 Nanocoatings Vacuum coating ■■MIKROFINISH® - ■■Physical vapour deposition - ■■NANOFINISH® - (PVD) ■■ORMOCER® - ■■Plasma enhanced chemical - vapour deposition (PECVD) Wet painting Sealings ■■SILA-COAT® 5000 47 Plasma chemical coatings Zinc flake coating 49 ■■MAGOXID-COAT®/ KEPLA-COAT® 27 (*pages in this brochure) (All technical values published in this brochure are subject to the test conditions specified. We therefore emphasise that the applications and operating conditions, along with the end user’s practical experience, will ultimately determine the level of performance achieved by the processes.) 2 Aalberts surface treatment BRIEF INFORMATION CompCote® aluminium oxide polymer composite layers 3 CompCote® CompCote® refers to aluminium oxide polymer com- material.
[Show full text]
Draft Zinc Flake Coating Specification.Pdf
RESEARCH DESIGNS AND STANDARD ORGANISATION MANAK NAGAR, LUCKNOW-226011 Document No. : ------------ Document Title : SPECIFICATION FOR NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS FOR HSFG BOLTING ASSEMBLIES AMENDMENT HISTORY: S.No. Amendment Date Version Reasons for Amendments 1. - 1.0 Draft of New Specification Page 1 of 13 SPECIFICATION FOR NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS FOR HSFG BOLTING ASSEMBLIES 1.0 Scope: This specification covers the requirements for non-electrolytically applied zinc flake coatings for steel fasteners. It applies to coatings with or without hexavalent chromium; with or without top coat; with or without lubricant (integral lubricant and/or subsequently added lubricant). It applies to bolts, screws, studs and nuts with ISO metric thread, to fasteners with non-ISO metric thread, and to non-threaded fasteners such as washers, pins, clips, etc. It does not apply to mechanically applied zinc coatings. This specification is intended to help better understanding of the codal provisions. For actual design/ use the relevant reference codes as given in para 2 below shall be referred to and followed. In case of any confusion, clarification or difference of opinion etc., the provisions given in the relevant reference codes as given in para 2 below shall prevail. 2.0 Reference Codes: Following codes has been referred while preparation of this specification: 2.1 ISO 10683:2018 2.2 EN 14399 Series (High strength structural bolting assemblies for preloading) 3.0 General Characteristics of the Coating: 3.1 Zinc flake coating systems Zinc flake coating systems are produced by applying zinc flake dispersion to the surface of a steel fastener, usually with the addition of aluminium flakes, in a suitable medium.
[Show full text]
Corrosion Aspects of Fastening Systems Corrosion Aspects of Fastening Systems
Corrosion aspects of fastening systems Corrosion aspects of fastening systems Foreword This brochure on the subject of corrosion covers the fundamental aspects of corro- sion and protection against corrosion. It provides an introduction to the behavior of materials and protective coatings for fastening systems. The brochure is intended to provide users with basic information on the correct use of systems for protection against corrosion in the field of fastening technology. The various fields of application of fasteners are described on the basis of examples and recommendations for correct material selection. These recommendations, how- ever, do not apply generally to all applications in their respective surroundings. In view of this, it is each user’s responsibility to check each application and, if neces- sary, to consult a corrosion specialist. In view of this, it is important to realize that even after reading this brochure you will still not be an expert on corrosion. It is, however, essential that you are informed about possible and suitable solutions and it is extremely important that you are aware of the potential risks of using an unsuitable material. Your local Hilti engineer will be pleased to support you and provide you with further information. He or she also will also be able to obtain support at any time from the specialists in our Corporate Research & Technology department, allowing you to take advantage of the in-depth know-how they have available. Materials Research Corporate Research & Technology Hilti Corporation Principality of Liechtenstein page 2 Corrosion aspects of fastening systems Corrosion aspects of fastening systems Contents Foreword 2 1.
[Show full text]