School of Ceramics
Total Page:16
File Type:pdf, Size:1020Kb
th The 13 Conference for Young Scientists in Ceramics Invited Speakers List of Participants 1. Subramshu S. Bhattacharya, Department of Metallurgical and Materials Engineering, IIT Madras, India 2. Jon Binner, School of Metallurgy and Materials, University of Birmingham, UK 3. Igor Djerd, Department of Chemistry, University of Josip Jurij Strossmayer, Osjek, Croatia 4. Davide Bossini, Technische Universität Dortmund, Faculty of Physics, Dortmund, Germany 5. Vincenzo Buscaglia, National Research Council, Institute of Condensed Matter Chemistry and Technologies for Energy, Genoa, Italy 6. Horst Hahn, Karlsruhe Institute of Technology (KIT), Institute of Nanotechnology, Karlsruhe, Germany 7. Lucian Kozielski, Institute of Technology and Mechatronics, University of Silesia, Sosnowiec, Poland 8. Nikola Knezevic, Institute Biosense, Novi Sad, Serbia 9. Akoš Kukovecz, Faculty of Science and Informatics, Department of Applied and Environmental Chemistry, University of Szeged, Hungary 10. Cristina Leonelli, Dipartimento di Ingegneria "Enzo Ferrari", Universita' degli Studi di Modena e Reggio Emilia, Modena, Italy 11. Laura Silvestroni, Italian National Research Council, Institute of Science and Technology for Ceramics, ISTEC, Italy 12. Paula Vilarinho, Department of Materials and Ceramics Engineering, University of Aveiro, Portugal 13. Markus Winterer, Nanoparticle Process Technology, Department of Engineering Sciences, University Duisburg-Essen, Duisburg, Germany Oral Presentations Advanced Ceramics 1. I. Nomel1,2, O. Durand-Panteix1, L. Boyer1, P. Marchet2 1R&T, Center for Technology Transfers in Ceramics, Limoges, France 2IRCER UMR 7315 CNRS, University of Limoges, Limoges, France Elaboration of lead-free piezoelectric materials for thick films coating by aerosol deposition 2. V.K. Veerapandiyan1, M. Kratzer2, M. Popov1, P.B. Groszewicz3, J. Spitaler1, C. Teichert2, G. Canu4, V. Buscaglia4, M. Deluca1 1Materials Center Leoben Forschung GmbH, Leoben, Austria 2Institute of Physics, Montanuniversitaet Leoben, Austria 3Institute of Physical Chemistry, TU Darmstadt, Geramny 4CNR-ICMATE, Genoa, Italy Role of polar defects in the origin of relaxor behaviour in niobium modified barium titanate polycrystals 3. A. Ressler Faculty of Chemical Engineering and Technology, University of Zagreb, Croatia Biomimetic zinc and magnesium substituted calcium phosphates derived from biogenic source 4. D. Brzezińska, R. Skulski, D. Bochenek, P. Niemiec University of Silesia, Institute of Technology and Mechatronics, Sosnowiec, Poland The properties of (1-x)(0.5PZT-0.5PFW)-xPFN ceramics doped by Li 5. L. Eglite, E. Birks, M. Antonova, M. Livinsh Institute of Solid State Physics, University of Latvia, Riga, Latvia Effect of sintering parameters and non-stoichiometry on the microstructure of Na0.5Bi0.5TiO3 6. D. Tovar-Vargas1,2, M. Turón-Viñas1,2, M. Anglada1,2, E. Jiménez-Pique1,2 1CIEFMA, Department of Materials Science and Metallurgical Engineering, EEBE, Universitat Politécnica de Catalunya, Barcelona, Spain 2Barcelona Research Center in Multiscale Science and Engineering, Universitat Politécnica de Catalunya, Barcelona, Spain Processing, characterization and mechanical properties of ceria-calcia stabilized zirconia ceramics with α-alumina addition 7. H.M. Bui, O. Hinrichsen Technical University of Munich, Germany Challenges for binder jetting of packings and monoliths for heterogeneous catalysis 8. J. Vujančević1, A. Bjelajac2, G. Provatas3, Z. Siketić3, M. Jakšić3, V. Pavlović1, Đ. Janaćković4 1Institute of Technical Sciences of SASA, Knez Mihailova 35/IV, 11000 Belgrade, Serbia 2LPICM, CNRS, École polytechnique, IP Paris, Route de Saclay, 91128, Palaiseau, France 3Ruđer Bošković Institute, Bijenička cesta 54, Zagreb 10000, Croatia 4University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, 11000 Belgrade, Serbia ToF-ERDA/RBS analysis of annealed TiO2 nanotubes grown onto FTO glass 9. N. Fakralmobasheri, A. Nourmohammadi Department of Nanotechnology Engineering, University of Isfahan, I. R. Iran Effect of two-step sintering on microstructure of barium titanate ceramics 10. M. Bara1, B. Wodecka-Duś1, T. Goryczka2, M. Adamczyk-Habrajska1 1Institute of Technology and Mechatronics, University of Silesia, Sosnowiec, Poland 2Institute of Materials Science, Faculty of Computer Science and Material Science, University of Silesia, Chorzów, Poland Dielectric and electrical properties BLT ceramics modified by Fe ions 11. J. Dzik1, T. Pikla2, D. Szalbot1, Ł. Ciepły1, M. Adamczyk-Habrajska1 1University of Silesia, Institute of Materials Science, Sosnowiec, Poland 2Lublin University of Technology, Institute of Electronics and Information Technology, Lublin, Poland Influence of rare earth ions on the properties of BiFeO3 ceramics 12. T. Škundrić1,2, D. Zagorac1,2, J. Zagorac1,2, J.C. Schön3, B. Matović1,2 1Materials Science Laboratory, Institute of Nuclear Sciences “Vinča”, University of Belgrade, Serbia 2Center for synthesis, processing and characterization of materials for application in the extreme conditions “CextremeLab”, Belgrade, Serbia 3Max Planck Institute for Solid State Research, Stuttgart, Germany Energy landscape exploration and prediction of possible phases in the CrSiN system 13. I. Sytnyk, V. Maslyuk Frantsevich Institute for Problems of Materials Science NAS of Ukraine, Kyiv, Krzhizhanovsky str., 3, 03142, Ukraine Influence of sintering temperature and chromium content on the properties and magnetic characteristics of powdered thermomagnetic materials 14. M. Mladenović1*, N. Ilić2, G. Kaluđerović2, N. Knežević1 1BioSense Institute, Group for nano and microelectronics, University of Novi Sad, Serbia 2Department of Engineering and Natural Sciences, University of Applied Sciences Merseburg, Germany pH-responsive delivery of anticancer metal complexes by functionalized mesoporous silica-based nanocarriers 15. P.F. Großmann, C. Troll, B. Rieger Technical University of Munich, Germany Direct Ink Writing as an additive manufacturing technique for shaping heterogeneous catalysts 16. S. Bakan, H. Boussebha, B. Özdemir, A.O. Kurt Department of Metallurgy and Materials Engineering, Sakarya University, Turkey Synthesis of B4C powder via dynamic thermochemical method 17. S. Laketić1,*, M. Rakin2, M. Momčilović1, J. Ciganović1, Đ. Veljović2, I. Cvijović-Alagić1 1Institute of Nuclear Sciences „Vinča“, University of Belgrade, Belgrade, Serbia 2Faculty of Technology and Metallurgy, University of Belgrade, Belgrade, Serbia Laser surface modification of CP-Ti in different gas atmospheres 18. E. İşlek1, H. Boğaç Poyraz1, M. Polat1, İ. Özgür Özer1,2 1Department of Mat Sci. & Eng, Eskisehir Technical University, Eskisehir, Turkey 2Magspin Transparent Ceramics, Eskisehir, Turkey Nano-sized magnesium spinel powders synthesized via flame spray pyrolysis 19. M.M. Uzelac, A.G. Šoškić, B.F. Abramović University of Novi Sad Faculty of Sciences, Department of Chemistry, Biochemistry and Environmental Protection, Novi Sad, Serbia Optimization of the photocatalytic degradation of thiotriazinone stable hydrolysis product of antibiotic ceftriaxone 20. B. Özdemir, N. Canikoğlu Sakarya University, Engineering Faculty, Department of Metallurgy and Materials Engineering, 54187, Sakarya, Turkey Synthesis of titanium nitride powder from rutile and anatase 21. A. Robles1, A. Orera1, R.I. Merino1, P.R. Slater2 1Instituto de Ciencia de Materiales de Aragón, CSIC-Universidad de Zaragoza, Zaragoza, Spain 2School of Chemistry, University of Birmingham, Birmingham, United Kingdom Suitability of Sr and Co-free lanthanum perovskite materials as cathodes for IT-SOFC with a lanthanum silicate apatite-type electrolyte 22. J. Lelièvre, P. Marchet CNRS – Université de Limoges, Institut de Recherche sur les CERamiques, UMR 7315, Centre Européen de la Céramique, Limoges, France Structure and properties of the lead-free perovskite compounds (Na1/2Bi1/2)ZrO3 (NBZ) and (K1/2Bi1/2)ZrO3 (KBZ) 23. E. Eray1,2, G. Magnacca3, V. Boffa2, V. Candelario1 1Liqtech International A/S, Ballerup, Denmark 2Aalborg University, Section of Chemistry, Aalborg, Denmark 3University of Turin, Department of Chemistry, Turin, Italy New generation silicon carbide ultrafiltration membranes for water purification 24. M. Stan1, R. Lach1, K. Wojciechowski 1, Ł. Łańcucki 2, M.M. Bucko1 1AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Dept. Ceramics and Refractories, Cracow, Poland 2AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Dept. Inorganic Chemistry, Cracow, Poland Sintering and preparation of polycrystals gadolinium-iron garnet (Gd3Fe5O12) by the solid-state reaction 25. A.U. Rehman1,2,3, T. Liu1,2, M.U. Salamci3, F. Pitir4, G. Küçüktürk3, K. Zhang1,2, W. Liao1,2, C. Zhang1,2 1School of Mechanical Engineering, Nanjing University of Science and Technology, Jiangsu, PR China 2Jiangsu Engineering Laboratory of High-end Manufacturing Equipment and Technology, Nanjing University of Science and Technology, Jiangsu, PR China 3Mechanical Engineering Department, Gazi University, Turkey 4Research and Development Department, ERMAKSAN, Turkey Additive manufacturing of magnesia and alumina eutectic composites 26. D. Don López1,2,3, N. Lotfibakhshaiesh3, A.P. Tomsia2, F. Guitián Rivera1 1Instituto de Cerámica de Galicia, Universidade de Santiago de Compostela, Spain 2Lawrence Berkeley National Laboratory, USA 3Tehran University of Medical Science, Iran Freeze casting and 3D printing of ceramic and polymer composites for bone tissue regeneration: