EXECUTIVE SUMMARY:

M/s. Ganraj Ispat Pvt. Ltd. is an existing Rolling mill (hereafter being referred as GIPL or the industry or project proponent) is a proposed plant of Billet /TMT Bars Manufacturing Facilities located at Plot No.A:3 Supa MIDC, Supa village, Taluka, District, . Its capacity is 1,000 MTD GIPL has about 419498 Sq. m. of land in its possession to conduct its desired operations.

1.1 Management Ganraj Ispat Pvt. Ltd. has a team of dynamic and progressive members in the Management Board. Under the dynamic and progressive leadership of Mr. Gaurav Dugad & Mr. Prateek Chordiya as Director, the industry is functioning well and achieving its goals.

1.2 Introduction

The Ministry of Environment and Forests (MoEF&CC) Government of has issued an EIA notification, S .O. 1533 dated 14 September 2006 notification amended in 1 December 2009 wide no. 3067. Under Environmental (Protection) Act (EPA) 1986. Prior Environmental Clearance from the EIA Authorities is mandatory for the establishment of projects/activities listed in the schedule of above notification Metallurgical projects is categorized under 3(a) of schedule of activities and therefore, require prior environmental clearance from the Expert appraisal committee / authority. Hence project of Ganraj Ispat Pvt. Ltd. industrial unit is classified under 3(a) category B.

1.3 TYPE OF PROJECT Table No. 1. Type of Project Sr. No. Feature Particulars Quantity

1. Products Billet & TMT Bars 1,000 MTD

1.4 SITE LOCATION

The TMT Bars/Billets manufacturing project will require land for entire basic infrastructure. Plant equipments, storage of plant inputs and finished products. Besides this Administrative Office, Security arrangements, Fire fighting arrangements etc. shall also have to be considered. Plant layout is prepared keeping in view, the above composition of project. It shall be accommodated in a plot size of approx. 419498 Sq. m. Table No. 2. Environmental Setting

Sr. No. Feature Particulars 1. Location M/s. Ganraj Ispat Pvt. Ltd. Plot No.A:3 Supa MIDC, Supa village, , , Maharashtra

2. Latitude 18°95'77.19"N Longitude 74°53'74.73"E

3 Nearest Highway Ahmednagar – Pune Highway 4. Nearest village Hanga ( 4 KM ) , ( 5 KM ) , Rui Chhatrapati ( 5 KM ) , Raytale ( 6 KM ) , ( 7 KM ) 5 Nearest Railway station Pune : 94 km 6. Nearest Airport Pune : 94 km 7. Nearest Town Ahmednagar (31 Km)

1.5 MAGNITUDE OF OPERATION: Following table clearly indicates all facets of proposed project to elaborate magnitude of project: Sr. No. Feature Details 1. Area Statement* Total Manufacturing Area 419498 Sq.m Area for manufacturing 419498 Sq.m 2. Working days 353 days 3. Products

Billet & TMT Bars 1,000 MTD 4. Water sources Water MIDC Fresh Water required 100 CMD 5. Power requirement 15 MW 6. Backup power 1000 KVA 7. D G set rating 1Nos. D G set Capacity 500 KVA Fuel used HSD Fuel consumption 130 liters/hr Man power 150 Nos. 8. Staff 40 Nos. Workers 110 Nos. 9. Total Investment Rs. 120 crs.

1.6 ENVIRONMENTAL MANAGEMENT PLAN

A comprehensive environmental management plan is adopted consisting of proposed pollution control measures and additional mitigation measures for abatement undesirable impacts. Summary of these measures includes:

1. Green belt and greenery development in the factory premises.

2. Waste water management Recycle & Reuse of condensate

3. Paving and lining of roads, solid storage yards of ash etc.

4. Self monitoring system is established in the industry with man power and facilities

to ascertain the compliances of environmental norms and standards.

5. Personal health care program, emergency management plan and safety

management systems will be implemented in the proposed unit.

6. Operation and Maintenance of pollution control measures

7. Establishment of waste reduction measure.