Perstorp.Com Or Through Your Perstorp Representative

Product data summary TABLE OF CONTENTS Page

Acids 3 Alcohols 3 Aldehydes 3 Alkoxylated polyalcohols 4 Allyl ethers 4 Bio-based esters 6 Capa™ Monomer 5 Capa™ Polyols 5 Capa™ Lactides 5 Capa™ Thermoplastics 5 Carbon source for intumescent systems 9 Coalescing agents 6 Feed additives 9 Food additives 9 Hydroxy acid 4 Mixed products 6 Molecular structures 7-8 Nonionic diol 4 Organic & inorganic salts 6 Oxetanes 6 Plasticizers 4 Polyalcohols 3 Polyalcohols from renewable sources 4 PVC co-stabilizers 4 Speciality polymers 6

2 Product data summary

This brochure contains a summary of our product range. More detailed information and specifications of each product are available on www.perstorp.com or through your Perstorp representative.

Alcohols

Appearance Reactive groups Molecular weight Purity Hydroxyl number Viscosity (Hydroxyl functionality) (g/mol) (%) min. (mg KOH/g) (mPas, 20 °C) 2-Ethylhexanol Liquid 1 130.2 99.6 431 9.7 2-Propylheptanol Liquid 1 158.3 99.51) 354 15.3 CTF Liquid 1 146.2 390 80 (Cyclic Trimethylolpropane Formal)

1) Purity as C10 alcohols

Aldehydes

Appearance Reactive groups Molecular weight Purity (Aldehyde functionality) (g/mol) (%) min. n-Butyraldehyde Liquid 1 72.1 99.0 Propionaldehyde Liquid 1 58.1 99.0 Formalin (conc. 30-50%) Liquid 1 30.0

Acids

Appearance Reactive groups Molecular weight Purity Concentration (g/mol) (%) min. (%) Formic Acid Liquid 1 carboxyl 46.0 75 or 85 Propionic Acid Liquid 1 carboxyl 74.1 99.5 Butyric Acid Liquid 1 carboxyl 88.1 99.5 Valeric Acid Liquid 1 carboxyl 102.1 98.5 Valeric Acid Pure Liquid 1 carboxyl 102.1 99.4 2-EHA (2-Ethylhexanoic Acid) Liquid 1 carboxyl 144.2 99.5 Phthalic Anhydride Flakes 1 anhydride 148.1 99.8

Polyalcohols

Appearance Reactive groups Molecular weight Hydroxyl number Melting point (Hydroxyl functionality) (g/mol) (mg KOH/g) (°C) BEPD (Butyl Ethyl Propanediol) Semi-crystalline 2 160.3 695 41 BEPD70L Liquid 2 146.1 795 < 21 1,6-Hexanediol Solid 2 118.2 950 42 MPD (Methyl Propanediol) Liquid 2 90.1 1,230 Liquid Neo (Neopentyl Glycol) Flakes 2 104.2 1,075 129 Neo 90 Liquid (90% in water) 2 104.2 1,075 35 Trimethylpentanediol Solid 2 146.2 765 50 TMP (Trimethylolpropane) Flakes 3 134.2 1,254 58 Glycerine tech Liquid 3 92.1 1,800 18 Di-TMP (Di-Trimethylolpropane) Flakes 4 250.3 896 106-115 Penta (Pentaerythritol) mono Crystals 4 136.4 1,645 263 Penta EXCETEQ™ Crystals 4 142.5 1,615 250 Penta nitration Crystals 4 136.4 1,645 263 Penta ICX Crystals 4 136.6 1,645 263 Di-Penta (Di-Pentaerythritol) 93 Crystals 6 254.1 1,325 222 Di-Penta 90 Crystals 6 255.0 1,320 222

3 Polyalcohols from renewable sources

Appearance Reactive groups Molecular weight Hydroxyl number Melting point (Hydroxyl functionality) (g/mol) (mg KOH/g) (°C) Voxtar™ M100 Crystals 4 136.4 1,645 260 Voxtar™ M50 Crystals 4 136.4 1,645 260 Voxtar™ T100 Crystals 4 142.5 1,615 248 Voxtar™ T50 Crystals 4 142.5 1,615 248 Voxtar™ D100 Crystals 6 254.1 1,325 222 Voxtar™ D50 Crystals 6 254.1 1,325 222

Plasticizers

Appearance Molecular weight Ester content Viscosity (g/mol) (%) min. (mPas, °C) Emoltene™ 100 Liquid 447 99.5 120-130 (20) Emoltene™ 100 IRG Liquid 447 99.0 120-130 (20) Emoltene™ 100 TOP Liquid 447 99.0 120-130 (20) Pevalen™ Liquid 472 >99.5 35 (20)

PVC co-stabilizers

Appearance Product type Melting point (°C) Holtac™ DT Micronized powder < 250 µm Polyalcohols 106-115 Holtac™ M Micronized powder < 40 µm Polyalcohols 263 Holtac™ T Micronized powder < 40 µm Polyalcohols 250 Holtac™ D Micronized powder < 40 µm Polyalcohols 222

Alkoxylated polyalcohols

Appearance Reactive groups Molecular weight Hydroxyl number Viscosity (Hydroxyl functionality) (g/mol) (mg KOH/g) (mPas, 23 °C) Polyol R2490 Liquid 2 220 485 150 Polyol 3165 Liquid 3 1,010 165 350 Polyol 3380 Liquid 3 444 380 360 Polyol 3610 Liquid 3 275 610 700 Polyol 3611 Liquid 3 275 610 700 Polyol 3990 Liquid 3 170 990 4,500 Polyol R3430 Liquid 3 398 425 400 Polyol R3530 Liquid 3 310 530 2,000 Polyol R3540 Liquid 3 310 540 550 Polyol R3600 Liquid 3 280 610 700 Polyol 4290 Liquid 4 800 290 450 Polyol 4360 Liquid 4 630 360 1,300 Polyol 4525 Liquid 4 430 525 3,000 Polyol 4640 Liquid 4 360 630 1,100 Polyol R4410 Liquid 4 565 410 700 Polyol R4630 Liquid 4 356 630 1,500 Polyol R4631 Liquid 4 356 630 1,400 Polyol R6405 Liquid 6 830 405 1,800

Nonionic diol

Appearance Reactive groups Molecular weight Hydroxyl number Viscosity (Hydroxyl functionality) (g/mol) (mg KOH/g) (mPas, 50 °C) Ymer™ N120 Amorphous 2 1,000 110 60

Hydroxy acid

Appearance Reactive groups Molecular weight Hydroxyl number Acid number (g/mol) (mg KOH/g) (mg KOH/g) Bis-MPA (Dimethylolpropionic Acid) Crystals 2 hydroxyl, 1 carboxyl 134.1 835 415

Allyl ethers

Appearance Reactive groups Molecular weight Hydroxyl number Viscosity (g/mol) (mg KOH/g) (mPas, 23 °C) APE (Allyl Pentaerythritol) Liquid 1 hydroxyl, 3 allyl 255.5 240 20 TMPDE 80 (Trimethylolpropane Diallyl Ether) Liquid 1 hydroxyl, 2 allyl 210.7 300 15 TMPDE 90 (Trimethylolpropane Diallyl Ether) Liquid 1 hydroxyl, 2 allyl 213.9 265 20 TMPME (Trimethylolpropane Monoallyl Ether) Liquid 2 hydroxyl, 1 allyl 174.2 640 130

4 Caprolactone range

Capa™ Monomer

Appearance Reactive group Molecular weight Purity Viscosity (g/mol) (%) min. (mPas, 20 °C) Capa™ Monomer Liquid 1 lactone 114.1 99.9 7

Capa™ Polyols

Appearance Reactive groups Molecular weight Polymer Hydroxyl number Viscosity (Hydroxyl functionality) (g/mol) chemistry (mg KOH/g) (mPas, °C) Capa™ 2043 Liquid 2 400 Polyester 280 40 (60) Capa™ 2054J Liquid 2 550 Polyester 208 60 (60) Capa™ 2065 Liquid 2 650 Polyester 173 80 (60) Capa™ 2085 Solid 2 830 Polyester 140 100 (60) Capa™ 2100J Solid 2 1,000 Polyester 112 150 (60) Capa™ 2101A Solid 2 1,000 Polyester 112 150 (60) Capa™ 2123A Solid 2 1,250 Polyester 90 241 (60) Capa™ 2125 Solid 2 1,250 Polyester 90 180 (60) Capa™ 2161A Solid 2 1,600 Polyester 70 300 (60) Capa™ 2200J Solid 2 2,000 Polyester 56 480 (60) Capa™ 2201 Solid 2 2,000 Polyester 56 480 (60) Capa™ 2201A Solid 2 2,000 Polyester 56 385 (60) Capa™ 2203A Solid 2 2,000 Polyester 56 460 (60) Capa™ 2204J Solid 2 2,000 Polyester 56 280 (80) Capa™ 2205 Solid 2 2,000 Polyester 56 435 (60) Capa™ 2209 Solid 2 2,000 Polyester 56 380 (60) Capa™ 2302A Solid 2 3,000 Polyester 37 1,100 (60) Capa™ 2302J Solid 2 3,000 Polyester 37 1,100 (60) Capa™ 2402J Solid 2 4,000 Polyester 28 1,670 (60) Capa™ 2403D Solid 2 4,000 Polyester 28 1,670 (60) Capa™ 3022 Liquid 2.4 (mixed) 240 Polyester 540 40 (60) Capa™ 3031 Liquid 3 300 Polyester 561 170 (60) Capa™ 3050J Liquid 3 540 Polyester 310 160 (60) Capa™ 3091 Liquid 3 900 Polyester 187 165 (60) Capa™ 3201 Solid 3 2,000 Polyester 84 355 (60) Capa™ 4101 Liquid 4 1,000 Polyester 224 340-530 (50) Capa™ 7201A Solid 2 2,000 Polyester: Polyether 56 315 (60) Capa™ 7203 Solid 2 2,000 Polyester: Polycarbonate 56 1,100 (60)

Capa™ Lactides

Appearance Reactive groups Molecular weight Polymer Renewable Hydroxyl number Viscosity (Hydroxyl Functionality) (g/mol) chemistry content % (mg KOH/g) (mPas, °C) Capa™ 8015D Liquid 2 1,000 co-polyester diol 25 112 213 (60) Capa™ 8025D Liquid 2 2,000 co-polyester diol 25 56 870 (60) Capa™ 8025E Liquid 3 2,000 co-polyester triol 25 84 700 (60) Capa™ 8502A Solid 2 50,000 Thermoplastic 10 2 co-polyester diol

Capa™ Thermoplastics

Appearance Reactive groups Molecular weight Melt flow index Melt flow index Melting point (Hydroxyl functionality) (g/mol) @ 80°C 1) @ 160°C 1) (°C) Capa™ 6250 Pellets 2 25,000 34 >250 58-60 Capa™ 6400 Pellets 2 37,000 16 >75 58-60 Capa™ 6500 Pellets 2 50,000 2.5 18 58-60 Capa™ 6500D Pellets 2 50,000 2.5 18 58-60 Capa™ 6506 Powder 2 50,000 2.5 18 58-60 Capa™ 6800 Pellets 2 80,000 0.3 2.4 58-60 1) Melt flow index measured with standard die, 2.16 kg weight, g/10 minutes at indicated temperature

5 Speciality polymers

Appearance Reactive group Molecular weight Hydroxyl number Viscosity (g/mol) (mg KOH/g) (Pas, °C) Dendritic Polymers Boltorn™ H311 Viscous liquid Hydroxyl groups 5,700 245 40 (23) Boltorn™ H2004 Viscous liquid 6 hydroxyl 3,200 120 15 (23) Boltorn™ P500 Viscous liquid Hydroxyl groups N/A 600 15 (23) Boltorn™ P1000 Viscous liquid Hydroxyl groups N/A 470 5 (23) Boltorn™ U3000 Liquid Unsaturated fatty acid 6,500 15 1 (23) Boltorn™ W3000 Semi-crystalline Non ionic, unsaturated fatty acid 9,000 15 2 (35) Polycarbonate diols Oxymer™ HD112 waxy 2 hydroxyl 1,000 112 0.47 (70) Oxymer™ HD56 waxy 2 hydroxyl 2,000 56 2.4 (70) Development Polycarbonate diols Oxymer™ M112 Viscous liquid 2 hydroxyl 1,000 112 20 (40)

Mixed products

Appearance Reactive group Molecular weight Hydroxyl number Viscosity (g/mol) (mg KOH/g) (mPas, °C) Polyol PX Semi-crystalline 2.7 hydroxyl 187 810 650 (50) Polyol PX 70 Liquid (70% in water) 2.7 hydroxyl 187 810 25 (23) Polyol TD Liquid 1.8 hydroxyl 126 800 150 (23)

Oxetanes

Appearance Reactive group Molecular weight Hydroxyl number Viscosity (g/mol) (mg KOH/g) (mPas, 20 °C) Curalite™ Ox Liquid 1 hydroxyl, 1 oxetane 115.7 485 27 (Trimethylolpropane Oxetane) Curalite™ OxPlus Liquid 2 oxetane 214.3 - 160 (Di-Trimethylolpropane Oxetane)

Coalescing agents

Appearance Type Boiling point Viscosity (°C) (mPas, °C) NX 795 Liquid Ester alcohol 255 16 (20) NX 800 Liquid Ester 282 5 (25)

Bio-based esters

Appearance Type Boiling point Viscosity Density (°C) (mPas, 20 °C) (kg/m3) RME (Rapeseed Oil Methyl Ester) Liquid Ester 348 6 879 (20 ˚C)

Organic & inorganic salts

Appearance Molecular weight Purity Solubility in water, Concentration (g/mol) (%) min. 20 °C (%) Calcium Formate tech Crystals 130.1 98 Soluble Sodium Formate Crystals 68.0 97 Soluble Sodium Formate S Grade Crystals 68.0 99 Soluble Sodium Formate Feed Grade Crystals 68.0 99 Soluble Sodium Sulphate Crystals 142.0 99 Soluble Sodium Chloride Crystals 58.4 99 Soluble Potassium Formate in water Liquid 84.1 Soluble 50-75

6 2-Ethylhexanol Phthalic Anhydride O

OH O

2-Propylheptanol BEPD (Butyl Ethyl Propanediol) OH

OH OH

CTF 1,6-Hexanediol (Cyclic Trimethylolpropane Formal) OO HO OH

OH n-Butylaldehyde MPD (Methyl Propanediol) O HO OH H

Propionaldehyde Neo (Neopentyl Glycol) O HO OH H

Formaldehyde Trimethylpentanediol O

H H OH OH

Formic Acid TMP (Trimethylolpropane) O OH HO H OH HO

Propionic Acid Glycerine tech

O OH HO OH OH

Valeric Acid Di-TMP O (Di-Trimethylolpropane) OH OH OH HO O OH

2-EHA Penta (2-Ethylhexanoic Acid) (Pentaerythritol) OH O HO OH OH HO

7 Di-Penta Dendritic polymer (Di-Pentaerythritol) OH OH

O H O H O H

HO O OH O H O O H H O O H

O O O O O O O

HO HO H O

O O O H O O O O O H

H O O O O

Nonionic Diol O O O H O O O H H O (Ymer N120) O O O O O O O O O H O

H O O O O O O O O O H HO O H O O O O H O O O H O O H O O O O O H O O H HO n O O O O H H O O O O O H

O O H O O H O O O O O H O O O O H O Bis-MPA O O H (Dimethylolpropionic Acid) O O H O O O H O O H O O

HO OH H O O O O H

O H O H HO

APE Polycarbonate diol (Allyl Pentaerythritol) O O

HO R1 O O R 2 OOR3 OH O n m O O

TMPDE Curalite™Ox (Trimethylolpropane Diallyl Ether) (Trimethylolpropane Oxetane) O

HO O OH

TMPME Curalite™OxPlus (Trimethylolpropane Monoallyl Ether) (Di-Trimethylolpropane Oxetane)

O O OH

HO O O

Capa™ Monomer Trifunctional ethoxylated polyol H O O

O O O O H O O H

Capa™ Polyol Tetrafunctional ethoxylated polyol

H O O H O O HO R OH O O O O nm O O

H O O H

8 Carbon source for intumescent systems

Appearance Water solubility Melting point Hydroxyl number (%) (°C) (mg KOH/g) Charmor™ PM40 Micronized powder < 40 µm 5.3 263 1,645 Charmor™ PT40 Micronized powder < 40 µm 4.7 250 1,615 Charmor™ DP40 Micronized powder < 40 µm 0.2 222 1,325 Charmor™ PM15 Micronized powder < 15 µm 5.3 263 1,645 Charmor™ DP15 Micronized powder < 15 µm 0.2 222 1,325

Feed additives Appearance Application area Active ingredients Butyric acid Liquid Feed additive raw material Butyric acid Formic Acid 75/85% Liquid Silage and preservation Formic acid ProPhorce™ AC 600 Liquid Acidifier, buffered Formic acid/Sodium formate ProPhorce™ AC 200 Powder Acidifier, calcium source Calcium formate ProPhorce™ AC 299 Powder Acidifier, DEB enhancer Sodium formate Propionic Acid Liquid Mould inhibitor, acidifier Propionic acid ProSid™ MI 700 Liquid Feed and grain preservation Propionic acid and its glycerol esters Product family Appearance Application area Active ingredients ProSid™ MI Liquid & powder Mould inhibitors Organic acids and salts of acids ProSid™ TB Powder Toxin binders Mineral absorbents ProSid™ FL Liquid & powder Preservative for liquid feed Organic acids and salts of acids ProPhorce™ AC Liquid & powder Acidifiers for feed Organic acids and salts of acids ProPhorce™ PH Liquid & powder Antibacterials for feed Organic acids, salts of acids and essential oils ProPhorce™ BD Liquid & powder Antibacterials for feed Organic acids, salts of acids and essential oils ProPhorce™ SR Liquid & powder Gut health enhancer Glycerol butyrines ProPhorce™ SA Liquid & powder Antibacterials for feed Organic acids and salts of acids ProFare™ EZ Liquid & powder Enzymes for feed Enzymes ProTain™ OT Liquid & powder Antioxidants for pet food & feed Anti-oxidants ProTain™ NA Liquid & powder Natural antioxidants for pet food & feed Natural anti-oxidants ProMyr™ NT Liquid & powder Silage additives - grass Organic acids and salts of acids ProMyr™ XR Liquid Silage additives - extra requirements Organic acids and salts of acids ProMyr™ TR Liquid Silage additives - TMR stabilizers Organic acids and salts of acids

Food additives Appearance Application area Active ingredients Profina™ CP Powder Food preservative Calcium propionate Profina™ SP Powder Food preservative Sodium propionate

9 A global leader in high growth niches

The Perstorp Group, a trusted world industrial leader, places focused and market-driven innovation at your fingertips. Our culture of performance builds on 135 years of experience and represents a complete chain of solutions in organic chemistry, process technology and application development.

As the global leader in high growth niches, such as powder and UV cured coatings, plasticizers, synthetic lubricants and grain preservation, we are committed to develop products providing essential properties to enhance the quality, performance and profitability of your products and processes. This is how we enable you to meet market demands for safer, lighter, more durable, economical effective and sustainable end-products for the automotive, construction, agriculture, packaging, transportation and consumer goods.

Our unique integrated production platform is backed by reliable business practices and a global commitment to responsiveness and flexibility. Consistent high quality, capacity and delivery security are ensured through strategic production plants in Asia, Europe and North America, as well as sales offices in all major markets. Likewise, we combine product and application assistance with the very best in technical support.

As we look to the future, we strive for the development of smarter and safer products and sustainable processes that reduce environmental impact and create real value in end-products. This principle of proactive innovation and responsibility applies not only to our own business, but also to our work with yours. In fulfilling it, we partner with you to create a winning formula www.amtryck.se that benefits your business – as well as the people it serves.