DOCSLIB.ORG

Line Printer Plus Programmer's Reference Manual Line Matrix

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Line Printer Plus Programmer's Reference Manual Line Matrix Line Printer Plus® Programmer’s Reference Manual Line Matrix Series Printers Trademark Acknowledgements IBM and Proprinter are registered trademarks of the International Business Machines Corp. IGP, LinePrinter Plus, PGL and Printronix are registered trademarks of Printronix, LLC. Code V is a trademark of Quality Micro Systems, Inc. HP is a registered trademark of Hewlett-Packard Company. Epson is a registered trademark of Seiko Epson Corporation. Dataproducts is a registered trademark of Dataproducts Corporation. Centronics is a registered trademark of Genicom Corporation. This product uses Intellifont Scalable typefaces and Intellifont technology. Intellifont is a registered trademark of Agfa Division, Miles Incorporated (Agfa). CG, Garth Graphic, Intellifont, and Type Director are registered trademarks, and Shannon and CG Triumvirate are trademarks of Agfa Division, Miles Incorporated (Agfa). CG Bodoni, CG Century Schoolbook, CG Goudy Old Style, CG Melliza, Microstyle, CG Omega, and CG Palacio are products of Agfa Corporation. CG Times, based on Times New Roman under license from The Monotype Corporation Plc is a product of Agfa. Univers is a registered trademark of Linotype AG and/or its subsidiaries. Letraset is a registered trademark, and Aachen, Revue and University Roman are trademarks of Esselte Pendaflex Corporation. Futura is a registered trademark of Fundición Tipográfica Neufville, S.A. ITC Avant Garde Gothic, ITC Benguiat, ITC Bookman, ITC Century, ITC Cheltenham, ITC Clearface, ITC Galliard, ITC Korinna, ITC Lubalin Graph, ITC Souvenir, ITC Tiepolo, ITC Zapf Chancery, and ITC Zapf Dingbats are registered trademarks of International Typeface Corporation. Albertus, Gill Sans, and Times New Roman are registered trademarks, and Monotype Baskerville is a trademark of The Monotype Corporation Plc, registered in the U.S. Pat. and TM office and elsewhere. Hiroshige and Marigold are trademarks of AlphaOmega Typography, Inc. Printronix, LLC. makes no representations or warranties of any kind regarding this material, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. Printronix, LLC. shall not be held responsible for errors contained herein or any omissions from this material or for any damages, whether direct, indirect, incidental or consequential, in connection with the furnishing, distribution, performance or use of this material. The information in this manual is subject to change without notice. This document contains proprietary information protected by copyright. No part of this document may be reproduced, copied, translated or incorporated in any other material in any form or by any means, whether manual, graphic, electronic, mechanical or otherwise, without the prior written consent of Printronix, LLC. COPYRIGHT © 2007, 2013, PRINTRONIX, LLC. All rights reserved. Table of Contents 1 Introduction .................................................................. 13 About this Manual .............................................................................................. 13 Warnings And Special Information ............................................................. 14 2 IBM Proprinter III XL Emulation .................................... 15 Overview ............................................................................................................ 15 Proprinter III XL Emulation Default Settings ............................................... 15 Configuring the Proprinter III XL Emulation with Control Codes ....................... 17 Format for Control Code Descriptions ........................................................ 17 Escape Control Codes Overview ................................................................ 17 Graphics Control Codes Overview ............................................................. 18 The Control Codes ...................................................................................... 19 Backspace................................................................................................... 22 Bell .............................................................................................................. 22 Bit Image Mode, Single Density (Normal Speed) ....................................... 22 Bit Image Mode, Double Density (Half Speed) ........................................... 23 Bit Image Mode, Double Density (Normal Speed) ...................................... 23 Bit Image Mode, Quadruple Density (Half Speed)...................................... 23 Bold Printing ................................................................................................ 24 Bold Printing, Cancel .................................................................................. 24 Cancel ......................................................................................................... 25 Carriage Return .......................................................................................... 25 Carriage Return Set .................................................................................... 25 Character Pitch 12 cpi ................................................................................. 26 Character Set Select: Set 1 (A)................................................................... 26 Character Set Select: Set 2 (B)................................................................... 26 Condensed Print ......................................................................................... 26 Condensed Print Cancel ............................................................................. 27 Deselect Printer .......................................................................................... 27 Double Wide Print ....................................................................................... 28 Double Wide Print (One Line Only) ............................................................ 29 Double Wide Print (One Line Only) Cancel ................................................ 29 Emphasized Print ........................................................................................ 29 Emphasized Print Cancel ............................................................................ 30 Form Feed................................................................................................... 30 Forms Length Set in Inches ........................................................................ 30 Forms Length Set in Lines .......................................................................... 31 Initialize Parameters ................................................................................... 31 Line Feed .................................................................................................... 33 Line Feed n/216 Inch (One Line Only) ........................................................ 33 Line Spacing 1/8 Inch (8 lpi) ....................................................................... 34 Line Spacing 7/72 Inch (10.3 lpi) ................................................................ 34 Line Spacing n/72 Inch (Executes) ............................................................. 35 Line Spacing n/72 Inch (Storage) ............................................................... 35 Line Spacing n/216 Inch ............................................................................. 36 Margin, Bottom ............................................................................................ 36 Margin, Bottom (Cancel) ............................................................................. 37 Margins, Horizontal ..................................................................................... 37 Overscoring ................................................................................................. 37 Print All Characters ..................................................................................... 38 Print Next Character ................................................................................... 38 Print Mode ................................................................................................... 38 Print Quality................................................................................................. 39 Proportional Spacing ................................................................................... 40 Select Attributes .......................................................................................... 40 Superscript/Subscript Printing..................................................................... 41 Superscript/Subscript Printing, Cancel ....................................................... 42 Super-Set Commands ................................................................................ 42 Set Top-of-Form .......................................................................................... 42 Tab, Horizontal ............................................................................................ 43 Tab Set/Clear, Horizontal ............................................................................ 43 Tab, Vertical ................................................................................................ 44 Tab Set/Clear, Vertical ................................................................................ 44 Tabs, Clear All (Return to default) .............................................................. 45 Underline ..................................................................................................... 45 Unidirectional
Load more

Recommended publications
  • Cumberland Tech Ref.Book
    Forms Printer 258x/259x Technical Reference DRAFT document - Monday, August 11, 2008 1:59 pm Please note that this is a DRAFT document. More information will be added and a final version will be released at a later date. August 2008 www.lexmark.com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. © 2008 Lexmark International, Inc. All rights reserved. 740 West New Circle Road Lexington, Kentucky 40550 Draft document Edition: August 2008 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time. Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
    [Show full text]
  • Guía Del Usuario T5040 Impresora De Sobremesa MARCAS REGISTRADAS Centronics Es Una Marca Comercial De Centronics Data Computer Corporation
    Guía del usuario T5040 Impresora de sobremesa MARCAS REGISTRADAS Centronics es una marca comercial de Centronics Data Computer Corporation. PCL y PCLXL son marcas comerciales de Hewlett-Packard Company. IBM y IBM PC son marcas comerciales de International Business Machines Corporation. Apple, AppleTalk, TrueType, Laser Writer y Machintosh son marcas comerciales de Apple Computer, Inc. Microsoft, Windows, Windows 9x, Windows ME, Windows 2000, Windows NT, Windows XP y MS-DOS son marcas registradas de Microsoft Corporation. PostScript es una marca comercial de Adobe Systems Inc. Todos los demás nombres o las demás marcas de productos son marcas comerciales de sus respecti- vas empresas u organizaciones. Guía del usuario Contenido Contenido Introducción 1 Características de la impresora 1 Interfaces 1 Emulaciones 1 Símbolos convencionales 1 Acerca del presente manual 2 1 Vista de conjunto 3 Vista de frente 3 Vista con la tapa abierta 3 Vista de atrás 4 2 Instalación 5 Desembalar la impresora 5 Colocar la impresora 6 Comprobar la tensión de la impresora 8 Conectar la impresora 9 Encender la impresora 10 3 Driver de impresora y firmware 11 Driver de impresora 11 Instalar un driver de impresión en Windows 95/98/ME 11 Instalar un driver de impresora en Windows 2000/2003/XP 11 Instalar un driver de impresora en Windows 7 13 Instalar un driver de impresora en Windows Vista 14 Otros sistemas operativos 15 Cambiar los ajustes de impresora 16 Propiedades de formularios (Windows 2000/2003/XP/ Vista/Windows 7/2008) 17 Cargar firmware 18 Interfaz 18 I
    [Show full text]
  • Billing Code 4210-67P DEPARTMENT of HOUSING and URBAN DEVELOPMENT
    This document is scheduled to be published in the 1 Federal Register on 10 /03/2013 and available online at http://federalregister.gov/a/2013-24155, and on FDsys.gov Billing Code 4210-67p DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5725-N-02] Final Fair Market Rents for the Housing Choice Voucher Program and Moderate Rehabilitation Single Room Occupancy Program Fiscal Year 2014 AGENCY: Office of the Assistant Secretary for Policy Development and Research, HUD. ACTION: Notice of Final Fiscal Year (FY) 2014 Fair Market Rents (FMRs). SUMMARY: Section 8(c)(1) of the United States Housing Act of 1937 (USHA) requires the Secretary to publish FMRs periodically, but not less than annually, adjusted to be effective on October 1 of each year. This notice publishes the FMRs for the Housing Choice Voucher, the Moderate Rehabilitation, the project-based voucher, and any other programs requiring their use. Today’s notice provides final FY 2014 FMRs for all areas that reflect the estimated 40th and 50th percentile rent levels trended to April 1, 2014. The FY 2014 FMRs are based on 5-year, 2007-2011 data collected by the American Community Survey (ACS). These data are updated by one-year recent-mover 2011 ACS data for areas where statistically valid one-year ACS data are available. The Consumer Price Index (CPI) rent and utility indexes are used to further update the data from 2011 to the end of 2012. HUD continues to use ACS data in different ways according to the statistical reliability of rent estimates for areas of different population sizes and counts of rental units.
    [Show full text]
  • IGP® / VGL Emulation Code V™ Graphics Language Programmer's Reference Manual Line Matrix Series Printers
    IGP® / VGL Emulation Code V™ Graphics Language Programmer’s Reference Manual Line Matrix Series Printers Trademark Acknowledgements IBM and IBM PC are registered trademarks of the International Business Machines Corp. HP and PCL are registered trademarks of Hewlett-Packard Company. IGP, LinePrinter Plus, PSA, and Printronix are registered trademarks of Printronix, LLC. QMS is a registered trademark and Code V is a trademark of Quality Micro Systems, Inc. CSA is a registered certification mark of the Canadian Standards Association. TUV is a registered certification mark of TUV Rheinland of North America, Inc. UL is a registered certification mark of Underwriters Laboratories, Inc. This product uses Intellifont Scalable typefaces and Intellifont technology. Intellifont is a registered trademark of Agfa Division, Miles Incorporated (Agfa). CG Triumvirate are trademarks of Agfa Division, Miles Incorporated (Agfa). CG Times, based on Times New Roman under license from The Monotype Corporation Plc is a product of Agfa. Printronix, LLC. makes no representations or warranties of any kind regarding this material, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. Printronix, LLC. shall not be held responsible for errors contained herein or any omissions from this material or for any damages, whether direct, indirect, incidental or consequential, in connection with the furnishing, distribution, performance or use of this material. The information in this manual is subject to change without notice. This document contains proprietary information protected by copyright. No part of this document may be reproduced, copied, translated or incorporated in any other material in any form or by any means, whether manual, graphic, electronic, mechanical or otherwise, without the prior written consent of Printronix, LLC.
    [Show full text]
  • ZGL, a Zebra® ZPL® Printer Protocol Interpreter Programmer's Reference
    ZGL, a Zebra® ZPL® Printer Protocol Interpreter Programmer’s Reference Manual Thermal Series Printers Trademark Acknowledgments ZPL, ZPL II, and Zebra are registered trademarks of Zebra Technologies Corporation. COPYRIGHT © 2002, 2013, 2015 PRINTRONIX, INC. All rights reserved. Table of Contents Introduction ..................................................................... 7 About This Manual ............................................................................................... 7 ZGL Configuration Options ........................................................................... 7 ZGL Menu Conversions ................................................................................ 7 ZGL Setup Menus ............................................................................................... 8 Menus Descriptions ...................................................................................... 9 Fully Supported Commands ......................................... 17 ^Bx - Barcodes ............................................................................................ 17 ^BY - Barcode Defaults ............................................................................... 18 ~CC / ^CC - Change Caret ......................................................................... 18 ~CD / ^CD - Change Delimiter .................................................................... 18 ^CF - Change Alphanumeric Default Font .................................................. 18 ~CT / ^CT - Change Tilde ..........................................................................
    [Show full text]
  • ANSI® Programmer’S Reference Manual
    ® ANSI® Programmer’s Reference Manual ANSI® Printers Programmer’s Reference Manual ® Trademark Acknowledgements Printronix, Inc. Unisys MTX, Inc. Memorex Telex Decision Systems InternationalDecision Data, Inc. makes no representations or warranties of any kind regarding this material, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. Printronix, Inc. Unisys MTX, Inc. Memorex Telex Decision Systems InternationalDecision Data, Inc. shall not be held responsible for errors contained herein or any omissions from this material or for any damages, whether direct, indirect, incidental or consequential, in connection with the furnishing, distribution, performance or use of this material. The information in this manual is subject to change without notice. This document contains proprietary information protected by copyright. No part of this document may be reproduced, copied, translated or incorporated in any other material in any form or by any means, whether manual, graphic, electronic, mechanical or otherwise, without the prior written consent of Printronix, Inc.Unisys.MTX, Inc. Memorex Telex. Decision Systems International.Decision Data, Inc. Copyright © 1998, 2010 Printronix, Inc. All rights reserved. Trademark Acknowledgements ANSI is a registered trademark of American National Standards Institute, Inc. Centronics is a registered trademark of Genicom Corporation. Dataproducts is a registered trademark of Dataproducts Corporation. Epson is a registered trademark of Seiko Epson Corporation. IBM and Proprinter are registered trademarks and PC-DOS is a trademark of International Business Machines Corporation. MS-DOS is a registered trademark of Microsoft Corporation. Printronix, IGP, PGL, LinePrinter Plus, and PSA are registered trademarks of Printronix, Inc. QMS is a registered trademark and Code V is a trademark of Quality Micro Systems, Inc.
    [Show full text]
  • User Guide IGP for SIDM Printers
    User Guide IGP for Dot Matrix Printers Mantenimiento Periféricos Informaticos C/Canteras, 15 28860 Paracauellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/ IGP for Dot Matrix Printers User Guide Scope This User Guide is to be considered as an enhancement to the standard documentation of your printer. Hence keep the printer’s standard documentation ready as your particular printer model is pictured in detail. 2 Mantenimiento Periféricos Informaticos C/Canteras, 15 28860 Paracauellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/ Table of Contents Table of Contents Subject Listing SCOPE........................................................................................................................................................... 2 CHAPTER 1: CONTROL PANEL ............................................................................................................ 7 BASIC ELEMENTS ........................................................................................................................................ 7 MENU STRUCTURE ...................................................................................................................................... 8 MENU PARAMETERS.................................................................................................................................... 9 MENU PRINTOUT EXAMPLE....................................................................................................................... 17 WEBPANEL ENHANCEMENTS ...................................................................................................................
    [Show full text]
  • Forms Printer 248X/249X
    Forms Printer 248x/249x Technical Reference October 2000 www.lexmark.com Third Edition (October 2000) The following paragraph does not apply to the United Kingdom or any country where such provisions are inconsistent with local law: LEXMARK INTERNA- TIONAL, INC. PROVIDES THIS PUBLICATION “AS IS” WITHOUT WAR- RANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions of the publication. Improvements and/or changes in the product(s) and/or the program(s) described in this publication may be made at any time. Publications are not stocked at the address given below; requests for publications should be made to your point of purchase. A form for reader's comments is provided at the back of this publication. If the form has been removed, comments may be addressed to Lexmark International, Inc., Department F95/035-3, 740 New Circle Road N.W., Lexington, Kentucky 40511-1876, U.S.A. Lexmark may use or distribute any of the information you sup- ply in any way it believes appropriate without incurring any obligation to you. Lexmark is a trademark of Lexmark International, Inc. Other trademarks are the property of their respective owners. © Copyright Lexmark International, Inc. 1993, 2000. All rights reserved. UNITED STATES GOVERNMENT RESTRICTED RIGHTS This software and documentation are provided with RESTRICTED RIGHTS.
    [Show full text]
  • Windows NLS Considerations Version 2.1
    Windows NLS Considerations version 2.1 Radoslav Rusinov [email protected] Windows NLS Considerations Contents 1. Introduction ............................................................................................................................................... 3 1.1. Windows and Code Pages .................................................................................................................... 3 1.2. CharacterSet ........................................................................................................................................ 3 1.3. Encoding Scheme ................................................................................................................................ 3 1.4. Fonts ................................................................................................................................................... 4 1.5. So Why Are There Different Charactersets? ........................................................................................ 4 1.6. What are the Difference Between 7 bit, 8 bit and Unicode Charactersets? ........................................... 4 2. NLS_LANG .............................................................................................................................................. 4 2.1. Setting the Character Set in NLS_LANG ............................................................................................ 4 2.2. Where is the Character Conversion Done? .........................................................................................
    [Show full text]
  • User-Manual-Dascom-Tally-T5040-En
    User Guide T5040 Flatbed Printer Mantenimiento Periféricos Informaticos C/Canteras, 15 28860 Paracauellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/ TRADEMARK ACKNOWLEDGEMENTS • Centronics is a trademark of Centronics Data Computer Corporation. • PCL and PCL6 are trademarks of Hewlett-Packard Company. • IBM and IBM PC are trademarks of International Business Machines Corporation. • Apple, AppleTalk, TrueType, Laser Writer and Macintosh are trade-marks of Apple Computer, Inc. • Microsoft, Windows, Windows 9x, Windows ME, Windows 2000, Windows NT, Windows XP and MS- DOS are registered trademarks of Microsoft Corporation. • PostScript is a trademark of Adobe Systems Inc. • All other brand or product names are trademarks of their respective companies or organizations. Mantenimiento Periféricos Informaticos C/Canteras, 15 28860 Paracauellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/ User Guide Table of contents Table of contents Introduction 1 Printer features 1 Interfaces 1 Emulations 1 Symbols used 1 About this manual 2 1 Printer at a glance 3 View from the front 3 View with cover opened 3 View from the rear 4 2 Installation 5 Unpacking the printer 5 Placing your printer 6 Checking the printer voltage 8 Connecting the printer 8 Switching on the printer 10 3 Printer drivers and firmware 11 Printer drivers 11 Installing a printer driver in Windows 95/98/ME 11 Installing a printer driver in Windows 2000/ 2003/XP 11 Installing a printer driver in Windows 7 13 Installing a printer driver in Windows Vista
    [Show full text]
  • Data Sheet Fujitsu Dot Matrix Printer DL7400 Accessories
    Data Sheet Fujitsu Dot Matrix Printer DL7400 Accessories Data Sheet Fujitsu Dot Matrix Printer DL7400 Accessories heavy duty, high-speed multi part printing With its reputation for professional quality the FUJITSU Dot Matrix Printer DL7400 is the first choice for heavy duty printing of multi-part invoices, sales orders, stationary and other similar documents. This printer is ideal for any application that involves the need for carbon and carbonless copies. Besides excellent paper handling features, this 24-pin dot-matrix printer offers impressive high speed printing and up to 7 copies at once (plus the original). High-speed printing At 12 cpi, print speeds range from 216 cps for letter quality to 606 cps for high draft quality. Barcode printing as standard The printer has built-in support for industry standard barcodes Flat printing structure This allows for smoother paper feeding and improves the accuracy of print positioning, while the printing penetrates from the surface paper to the bottom paper in multiple batches. It is also effective when handling heavy loads of multiple paper. A variety of paper paths 8 paper paths are available of which up to 4 forms can be loaded on the printer at the same time. This means that there is no need to bother changing the forms each time. APTC and HCPP function Detecting paper thickness, adjusting head gap automatically and changing paper paths can be handled by using the application software or Windows driver even if several paper forms are loaded at the same time. Page 1 / 4 www.fujitsu.com/fts/accessories
    [Show full text]
  • Dl7400pro / Dl7600pro
    FUJITSU 24Wire Dot Matrix Printer DL7400Pro / DL7600Pro DL7600Pro CutCut SheetS Feeder Large Stacker(Optional) -High-speed,High-reliability and High-performance 9DULRXVRISDSHUVSDWKE\ÁDWSULQWLQJVWUXFWXUH -Low-impact to Environment FUJITSU ISOTEC LIMITED Data Sheet FUJITSU 24Wire Dot Matrix Printer DL7400Pro / DL7600Pro Technical details Model Name DL7400Pro DL7600Pro DL7400Pro Printing Technology Bi-directional with logical seeking ← Print Head 24 wire, Impact Dot Matrix ← Wire Diameter Standard Φ0.20mm Φ0.21mm Factory Option - Φ0.25mm Printing columns (10cpi) 136 column ← Speed Super High Draft Quality 600cps (10cpi) 800cps (10cpi) High Draft Quality 505cps (10cpi),606cps (12cpi) 720cps (10cpi),864cps (12cpi) Draft Quality 360cps (10cpi),432cps (12cpi) 540cps (10cpi),648cps (12cpi) Report Quality 240cps (10cpi),288cps (12cpi) 360cps (10cpi),432cps (12cpi) DL7600Pro Letter Quality 120cps (10cpi),144cps (12cpi) 180cps (10cpi),216cps (12cpi) Resolution 360 x 360 dpi *1 ← Copy Ability Original + 4carbonless copies Original + 7carbonless copies at high impact mode Original + 7 carbonless copies Original + 8 carbonless copies Max. paper thickness 0.57mm (0.0224") 0.65mm (0.0256”) Line Feed Speed 60ms per 1/6" line 50ms per 1/6" line Form Feed Speed 6" per second continuous feed 12” per second continuous feed Continuous Form/Cut Sheet switch function Manual/Auto ← Paper thickness adjust function Manual/Auto ← Interface Parallel IEEE1284 Nibble Mode ← Dimensions: DL7400Pro USB USB Ver.2.0 (TYPE B) ← DL7600Pro Serial RS232C 25pin ← LAN(Optional
    [Show full text]