HPE MSA 2062 Storage Array
Total Page:16
File Type:pdf, Size:1020Kb
QuickSpecs HPE MSA 2062 Storage Array Overview HPE MSA 2062 Storage Array Looking for seriously simple and affordable flash storage? The HPE MSA 2062 Storage is a flash-enabled system designed for affordable application acceleration for small and remote office deployments. Don’t let the low cost fool you. The MSA 2062 gives you the combination of simplicity, flexibility and advanced features you many not expect in an entry-priced storage array. Starting with 3.84 TB of embedded flash capacity, you can scale the system from there with any combination of solid state disks (SSD), high-performance Enterprise SAS HDDs, or lower-cost Midline SAS HDDs. Capable of delivering in excess of 325,000 IOPS, the MSA 2062 saves you up to 32% with an all-inclusive software suite and 3.84TB of flash capacity included. It’s seriously simple and affordable flash storage to help you achieve high performance yet meet challenging budgets. HPE MSA 2062 Storage HPE MSA 2062 Storage Item Description 1. Power Switch 5. 12Gb SAS expansion port 2. Redundant Power and Cooling Module (AC or DC) 6. Controller A (Inverted) 3. Host connection ports (16Gb FC, 10GbE iSCSI or 12Gb 7. Controller B SAS depending on model) 4. Ethernet management port Page 1 QuickSpecs HPE MSA 2062 Storage Array Overview What’s New • MSA 2062 LFF and SFF array models supporting 10GBase-T host connectivity. Each controller includes four (4) integrated RJ45 Ethernet (copper) ports for connection to switch or server using CAT6/7 cabling – no SFPs required. Results in infrastructure savings of 50% or more when deploying iSCSI storage configurations. • IN110R001 firmware update supporting up to 34% greater random read performance (IOPs) for 2060 and 2062 array models. Firmware update available via the MSA firmware page and the MSA Health Check tool for all MSA Gen6 array models. • HPE MSA 18TB SAS 7.2K LFF HDD available in single drive and six-pack bundles options. MSA 2062 Storage Models Description SKU HPE MSA 2062 16Gb Fibre Channel LFF Storage R0Q79A HPE MSA 2062 16Gb Fibre Channel SFF Storage R0Q80A HPE MSA 2062 10GbE iSCSI LFF Storage R0Q81A HPE MSA 2062 10GbE iSCSI SFF Storage R0Q82A HPE MSA 2062 12Gb SAS LFF Storage R0Q83A HPE MSA 2062 12Gb SAS SFF Storage R0Q84A HPE MSA 2062 10GBASE-T iSCSI LFF Storage R7J70A HPE MSA 2062 10GBASE-T iSCSI SFF Storage R7J71A Notes: − Includes an MSA 2060-branded LFF or SFF array chassis depending on model, two MSA 2060 controllers, two 1.92TB Read Intensive SSDs, One Advanced Data Services LTU (preinstalled on the array), two AC power supplies, two 1.5m PDU cords (IEC C14), one rack-mount kit. − SFPs are not included in the base Storage Systems. − All MSA 2062 Fibre Channel and 10GbE iSCSI array models must use the appropriate Gen6 SFP option – please review “Configuration Information” section for further details. Page 2 QuickSpecs HPE MSA 2062 Storage Array Standard Features HPE MSA 2062 Storage Array Access Type Block Form Factor 2U, SFF or LFF Number of controllers per array 2 Number of host ports per array 8 FC host connectivity 16Gb iSCSI host connectivity 10GbE and 10GBase-T SAS host connectivity 12Gb Cache, per array Max Read cache per array 8TB Data (read/write) cache + system memory per array 24GB Pool Capacity Two Pools with 1 PB each RAID Levels supported: RAID 0*,1, 5, 6, 10, MSA-DP+ Notes: *Read Cache Only Enclosures Expansion Drive Enclosures 0-9 enclosures LFF/SFF array/enclosure mixing Supported Maximum number of drives per array enclosure 24 SFF/12 LFF Maximum number of drives per drive enclosure 24 SFF/12 LFF Drive enclosure interface type 12Gb SAS Drives Maximum total HDDs per array 240 SFF / 120 LFF Maximum total SSDs per array 240 SFF / 120 LFF Max raw capacity per array enclosure 88.32TB SFF / 183.84TB LFF Max raw capacity per drive enclosure 92.16TB SFF / 216TB LFF Max raw capacity per array 917.76TB SFF / 2127.84TB LFF Drive Capacities SFF SSDs 960GB, 1.92TB, 3.84TB LFF SSD 1.92TB SFF HDDs 15K: 900GB 10K: 600GB, 1.2TB, 1.8TB, 2.4TB LFF HDDs 7.2K: 6TB, 8TB, 10TB, 12TB, 14TB, 16TB, 18TB Software Features Thin Technologies Thin Provisioning, Space Reclamation, Thin Rebuild Tiering Performance Tier, Standard Tier, Archive Tier Replication Snapshots (512), Volume Copy, Remote Snaps Quality of Service Virtual Tier Affinity Bundled/Integrated Licenses Advanced Data Services LTU standard on MSA 2062 (preinstalled on the array) Page 3 QuickSpecs HPE MSA 2062 Storage Array Standard Features Additional Features Maximum number of volumes 512 Maximum number of snapshots 512 Maximum number of hosts 512 Maximum number of initiators 1024 Customer self-installable Yes Customer self-repairable Yes Customer self-upgradeable Yes Health Check analytics Yes Energy Star Certified Yes All MSA 2062 models offer a common set of valuable features MSA 2062 Solution • MSA 2060-branded LFF or SFF array chassis depending on model • Two AC power supplies • Two MSA 2060 Storage Controllers (FC, iSCSI or SAS) • Two 1.92TB Read Intensive SSDs • One Advanced Data Services LTU (preinstalled on the array) Chassis • 12 drive bay LFF or 24 drive bay SFF 2U base arrays, depending on model • 12 drive bay LFF or 24 drive bay SFF 2U expansion enclosures, depending on model • 12Gb SAS disk expansion protocol • New next-generation drive carriers • New optional locking bezel Storage Controllers • Dual hot-swappable active/active controllers • 4 host ports per controller, 8 host ports per array • 16Gb Fibre Channel, 10GbE iSCSI, 10GBase-T iSCSI, and 12Gb SAS protocol support • Auto negotiation • New next-generation RAID offload ASIC and Processor • 24GB system cache • 12Gb SAS expansion ports • Battery-free cache backup with super capacitors and compact flash Expansion Capacity • Maximum expansion of 9 drive enclosures (either LFF and/or SFF) • Maximum of 240 SFF or 120 LFF drives • Maximum of 921.6TB SFF / 2.16PB LFF raw capacity Page 4 QuickSpecs HPE MSA 2062 Storage Array Standard Features Storage Services • Virtual Storage − Up to two pools (1PB each) − Automated tiering v2.0 − SSD read cache extension − Thin Provisioning − Volume Copy − Snapshot capability (512 snapshots per array, standard) • Virtual Storage Disk Groups can be spanned across multiple enclosures. • Virtual Storage RAID levels supported: 1, 5, 6, 10, MSA-DP+ • New disk group type (MSA-DP+): − Integrated sparing − Fast rebuilds − Improved sequential performance − Incremental disk group expansion Management • New redundant web based interface (SMU v4) • HPE MSA Health Check • New RESTful interface • CLI • Non-disruptive on-line controller code upgrade. Requires Multi-pathing software • Arxscan Arxview remote monitoring via HPE Complete Data Protection • Remote Snapshot (Array-based asynchronous replication, standard) • VMware Site Recovery Manager • Zerto Virtual Replication via HPE Complete • Optional locking bezel Product Technology Storage Controllers • The MSA 2062 FC controllers with 16Gb FC host connectivity. • The MSA 2062 iSCSI controllers with 10GbE iSCSI host connectivity. • The MSA 2062 iSCSI controllers with 10GBase-T iSCSI host connectivity. • The MSA 2062 SAS controllers with 12Gb SAS host connectivity. • No converged SAN controllers with MSA 2062 models. • Dual controller active/active (dual pool) design. System can be configured as active/passive (single pool). • Controllers contain next generation RAID offload ASIC and CPU. • 24GB System cache • 12Gb SAS expansion ports. Notes: The MSA 2062 does not support single controller configurations. Single-controller support is provided only when a controller fails over to its partner controller. Page 5 QuickSpecs HPE MSA 2062 Storage Array Standard Features Modular Chassis • New chassis design with the MSA array and drive enclosures. • 2U rack height 12 LFF or 24 SFF drive bays, depending on model. • 12G SAS Midplane. • Next generation drive modules. Available Drives The MSA 2062 Storage Systems support a wide variety of the MSA 3.5-inch LFF drives, and the MSA 2.5-inch SFF drives. • Solid-State Drives (SSDs) deliver the highest levels of performance and reliability. • Enterprise-class SAS hard disk drives (10K/15K RPM) offer a balance of performance, capacity, and cost while delivering enterprise grade reliability. • Midline SAS hard disk drives (7.2K RPM) are optimized to provide the best ratio of capacity to cost. Optional Drive Enclosures MSA 2060 LFF Drive Enclosure This 2U enclosure is designed to support twelve HPE Storage LFF drives and accepts MSA dual-ported 12Gb SSD, Enterprise SAS and SAS Midline hard drives. The pre-configured MSA 2060 LFF Drive enclosure has two I/O modules and supports the MSA 2060 Storage systems. • The MSA 2060 LFF Drive Enclosure can be attached to the MSA 2062 LFF or SFF Storage systems. • Each MSA 2060 LFF Drive Enclosure ships standard with two .5m mini-SAS HD to mini-SAS HD cables for connection to the MSA 2060 array expansion port or existing drive enclosure cascade port. • LFF and/or SFF drive enclosures can be mixed up to the maximum of nine drive enclosures HPE MSA 2060 SFF Drive Enclosure This 2U enclosure is designed to support twenty four HPE Storage SFF drives and accepts MSA dual ported 12Gb SSD, Enterprise SAS, or SAS Midline hard drives. The pre-configured MSA 2060 SFF Drive Enclosure has two I/O modules and supports the MSA 2062Storage systems. • The MSA 2060 SFF Drive Enclosure can be attached to the MSA 2062 LFF or SFF Storage systems. • Each MSA 2060 SFF Drive Enclosure ships standard with a two .5m mini-SAS HD to mini-SAS HD cables for connection to the MSA 2062 array expansion port or existing drive enclosure cascade port. • LFF and/or SFF Drive Enclosures can be mixed up to the maximum of nine drive enclosures. Scalability • LFF configurations can scale up to 216TB per drive enclosure, expandable to 2127.84TB SAS with the addition of a maximum of 9 MSA 2060 LFF Drive Enclosures.